Cell type-specific response to growth on soft materials

Spontaneous crumpling of active spherical shells

The existence of a crumpled phase for self-avoiding elastic surfaces was postulated more than three decades ago using simple Flory-like scaling arguments. Despite much effort, its stability in a microscopic environment has been the subject of much debate. In this paper we show how a crumpled phase develops reliably and consistently upon subjecting a thin spherical shell to active fluctuations. We find a master curve describing how the relative volume of a shell changes with the strength of the active forces, that applies for every shell independent of size and elastic constants. Furthermore, we extract a general expression for the onset active force beyond which a shell begins to crumple. Finally, we calculate how the size exponent varies along the crumpling curve.

An optimized method of culturing neurons based on polyacrylamide gel

Substrate stiffness is a microenvironment with a certain stiffness constructed by the extracellular matrix and adjacent cells, which plays an important role in the growth and development of cells and tissue formation. Studies have indicated that the stiffness of the brain is about 0.1-1 kPa. The physiological and pathological processes of the nervous system are mediated by the substrate stiffness that the neurons suffer. However, how substrate stiffness regulates these processes remains to be studied. Culturing neurons on substrates with different stiffness in vitro is one of the best methods to study the role of stiffness in regulating neuronal development and activity. In this study, by changing the preparation time and the activation time of polyacrylamide gel, we provide an improved method that achieves a low toxic substrate environment for better primary neuron adhesion and development. Hope that this method is convenient for those studying the role of substrate stiffness in neurons.

Microfabrication and lab-on-a-chip devices promotein vitromodeling of neural interfaces for neuroscience researches and preclinical applications

Neural tissues react to injuries through the orchestration of cellular reprogramming, generating specialized cells and activating gene expression that helps with tissue remodeling and homeostasis. Simplified biomimetic models are encouraged to amplify the physiological and morphological changes during neural regeneration at cellular and molecular levels. Recent years have witnessed growing interest in lab-on-a-chip technologies for the fabrication of neural interfaces. Neural system-on-a-chip devices are promisingin vitromicrophysiological platforms that replicate the key structural and functional characteristics of neural tissues. Microfluidics and microelectrode arrays are two fundamental techniques that are leveraged to address the need for microfabricated neural devices. In this review, we explore the innovative fabrication, mechano-physiological parameters, spatiotemporal control of neural cell cultures and chip-based neurogenesis. Although the high variability in different constructs, and the restriction in experimental and analytical access limit the real-life applications of microphysiological models, neural system-on-a-chip devices have gained considerable translatability for modeling neuropathies, drug screening and personalized therapy.

Impact of elastic substrate on the dynamic heterogeneity of WC256 Walker carcinosarcoma cells

Cellular heterogeneity is a phenomenon in which cell populations are composed of subpopulations that vary in their behavior. Heterogeneity is particularly pronounced in cancer cells and can affect the efficacy of oncological therapies. Previous studies have considered heterogeneity dynamics to be indicative of evolutionary changes within subpopulations; however, these studies do not consider the short-time morphological plasticity of cells. Physical properties of the microenvironment elasticity have also been poorly investigated within the context of cellular heterogeneity, despite its role in determining cellular behavior. This article demonstrates that cellular heterogeneity can be highly dynamic and dependent on the micromechanical properties of the substrate. During observation, migrating Walker carcinosarcoma WC256 cells were observed to belong to different subpopulations, in which their morphologies and migration strategies differed. Furthermore, the application of an elastic substrate (E = 40 kPa) modified three aspects of cellular heterogeneity: the occurrence of subpopulations, the occurrence of transitions between subpopulations, and cellular migration and morphology. These findings provide a new perspective in the analysis of cellular heterogeneity, whereby it may not be a static feature of cancer cell populations, instead varying over time. This helps further the understanding of cancer cell behavior, including their phenotype and migration strategy, which may help to improve cancer therapies by extending their suitability to investigate tumor heterogeneity.

Cellular mechanotransduction in health and diseases: from molecular mechanism to therapeutic targets

Cellular mechanotransduction, a critical regulator of numerous biological processes, is the conversion from mechanical signals to biochemical signals regarding cell activities and metabolism. Typical mechanical cues in organisms include hydrostatic pressure, fluid shear stress, tensile force, extracellular matrix stiffness or tissue elasticity, and extracellular fluid viscosity. Mechanotransduction has been expected to trigger multiple biological processes, such as embryonic development, tissue repair and regeneration. However, prolonged excessive mechanical stimulation can result in pathological processes, such as multi-organ fibrosis, tumorigenesis, and cancer immunotherapy resistance. Although the associations between mechanical cues and normal tissue homeostasis or diseases have been identified, the regulatory mechanisms among different mechanical cues are not yet comprehensively illustrated, and no effective therapies are currently available targeting mechanical cue-related signaling. This review systematically summarizes the characteristics and regulatory mechanisms of typical mechanical cues in normal conditions and diseases with the updated evidence. The key effectors responding to mechanical stimulations are listed, such as Piezo channels, integrins, Yes-associated protein (YAP) /transcriptional coactivator with PDZ-binding motif (TAZ), and transient receptor potential vanilloid 4 (TRPV4). We also reviewed the key signaling pathways, therapeutic targets and cutting-edge clinical applications of diseases related to mechanical cues.

Microenvironments Matter: Advances in Brain-on-Chip

To highlight the particular needs with respect to modeling the unique and complex organization of the human brain structure, we reviewed the state-of-the-art in devising brain models with engineered instructive microenvironments. To acquire a better perspective on the brain's working mechanisms, we first summarize the importance of regional stiffness gradients in brain tissue, varying per layer and the cellular diversities of the layers. Through this, one can acquire an understanding of the essential parameters in emulating the brain in vitro. In addition to the brain's organizational architecture, we addressed also how the mechanical properties have an impact on neuronal cell responses. In this respect, advanced in vitro platforms emerged and profoundly changed the methods of brain modeling efforts from the past, mainly focusing on animal or cell line research. The main challenges in imitating features of the brain in a dish are with regard to composition and functionality. In neurobiological research, there are now methods that aim to cope with such challenges by the self-assembly of human-derived pluripotent stem cells (hPSCs), i.e., brainoids. Alternatively, these brainoids can be used stand-alone or in conjunction with Brain-on-Chip (BoC) platform technology, 3D-printed gels, and other types of engineered guidance features. Currently, advanced in vitro methods have made a giant leap forward regarding cost-effectiveness, ease-of-use, and availability. We bring these recent developments together into one review. We believe our conclusions will give a novel perspective towards advancing instructive microenvironments for BoCs and the understanding of the brain's cellular functions either in modeling healthy or diseased states of the brain.

Effects of surface patterning and topography on the cellular functions of tissue engineered scaffolds with special reference to 3D bioprinting

The extracellular matrix (ECM) of the tissue organ exhibits a topography from the nano to micrometer range, and the design of scaffolds has been inspired by the host environment. Modern bioprinting aims to replicate the host tissue environment to mimic the native physiological functions. A detailed discussion on the topographical features controlling cell attachment, proliferation, migration, differentiation, and the effect of geometrical design on the wettability and mechanical properties of the scaffold are presented in this review. Moreover, geometrical pattern-mediated stiffness and pore arrangement variations for guiding cell functions have also been discussed. This review also covers the application of designed patterns, gradients, or topographic modulation on 3D bioprinted structures in fabricating the anisotropic features. Finally, this review accounts for the tissue-specific requirements that can be adopted for topography-motivated enhancement of cellular functions during the fabrication process with a special thrust on bioprinting.

Materials and extracellular matrix rigidity highlighted in tissue damages and diseases: Implication for biomaterials design and therapeutic targets

Rigidity (or stiffness) of materials and extracellular matrix has proven to be one of the most significant extracellular physicochemical cues that can control diverse cell behaviors, such as contractility, motility, and spreading, and the resultant pathophysiological phenomena. Many 2D materials engineered with tunable rigidity have enabled researchers to elucidate the roles of matrix biophysical cues in diverse cellular events, including migration, lineage specification, and mechanical memory. Moreover, the recent findings accumulated under 3D environments with viscoelastic and remodeling properties pointed to the importance of dynamically changing rigidity in cell fate control, tissue repair, and disease progression. Thus, here we aim to highlight the works related with material/matrix-rigidity-mediated cell and tissue behaviors, with a brief outlook into the studies on the effects of material/matrix rigidity on cell behaviors in 2D systems, further discussion of the events and considerations in tissue-mimicking 3D conditions, and then examination of the in vivo findings that concern material/matrix rigidity. The current discussion will help understand the material/matrix-rigidity-mediated biological phenomena and further leverage the concepts to find therapeutic targets and to design implantable materials for the treatment of damaged and diseased tissues.

•

Discuss the cutting-edge findings on the role of matrix rigidity in dictating diverse cell behaviors.

•

Underscore the dynamic matrix rigidity that interplays with cells, and the related pathophysiological phenomena.

•

Illuminate the significance of matrix rigidity in clinically-relevant settings.

Does the Extracellular Matrix Support Cell-Cell Communication by Elastic Wave Packets?

The extracellular matrix (ECM) is a fibrous network supporting biological cells and provides them a medium for interaction. Cells modify the ECM by applying traction forces, and these forces can propagate to long ranges and establish a mechanism of mechanical communication between neighboring cells. Previous studies have mainly focused on analysis of static force transmission across the ECM. In this study, we explore the plausibility of dynamic mechanical interaction, expressed as vibrations or abrupt fluctuations, giving rise to elastic waves propagating along ECM fibers. We use a numerical mass-spring model to simulate the longitudinal and transversal waves propagating along a single ECM fiber and across a 2D random fiber network. The elastic waves are induced by an active contracting cell (signaler) and received by a passive neighboring cell (receiver). We show that dynamic wave propagation may amplify the signal at the receiver end and support up to an order of magnitude stronger mechanical cues and longer-ranged communication relative to static transmission. Also, we report an optimal impulse duration corresponding to the most effective transmission, as well as extreme fast impulses, in which the waves are encaged around the active cell and do not reach the neighboring cell, possibly due to the Anderson localization effect. Finally, we also demonstrate that extracellular fluid viscosity reduces, but still allows, dynamic propagation along embedded ECM fibers. Our results motivate future biological experiments in mechanobiology to investigate, on the one hand, the mechanosensitivity of cells to dynamic forces traveling and guided by the ECM and, on the other hand, the impact of ECM architecture and remodeling on dynamic force transmission and its spectral filtering, dispersion, and decay.

The role of cellular traction forces in deciphering nuclear mechanics

Cellular forces exerted on the extracellular matrix (ECM) during adhesion and migration under physiological and pathological conditions regulate not only the overall cell morphology but also nuclear deformation. Nuclear deformation can alter gene expression, integrity of the nuclear envelope, nucleus-cytoskeletal connection, chromatin architecture, and, in some cases, DNA damage responses. Although nuclear deformation is caused by the transfer of forces from the ECM to the nucleus, the role of intracellular organelles in force transfer remains unclear and a challenging area of study. To elucidate nuclear mechanics, various factors such as appropriate biomaterial properties, processing route, cellular force measurement technique, and micromanipulation of nuclear forces must be understood. In the initial phase of this review, we focused on various engineered biomaterials (natural and synthetic extracellular matrices) and their manufacturing routes along with the properties required to mimic the tumor microenvironment. Furthermore, we discussed the principle of tools used to measure the cellular traction force generated during cell adhesion and migration, followed by recently developed techniques to gauge nuclear mechanics. In the last phase of this review, we outlined the principle of traction force microscopy (TFM), challenges in the remodeling of traction forces, microbead displacement tracking algorithm, data transformation from bead movement, and extension of 2-dimensional TFM to multiscale TFM.

An overview of substrate stiffness guided cellular response and its applications in tissue regeneration

Cell-matrix interactions play a critical role in tissue repair and regeneration. With gradual uncovering of substrate mechanical characteristics that can affect cell-matrix interactions, much progress has been made to unravel substrate stiffness-mediated cellular response as well as its underlying mechanisms. Yet, as a part of cell-matrix interaction biology, this field remains in its infancy, and the detailed molecular mechanisms are still elusive regarding scaffold-modulated tissue regeneration. This review provides an overview of recent progress in the area of the substrate stiffness-mediated cellular responses, including 1) the physical determination of substrate stiffness on cell fate and tissue development; 2) the current exploited approaches to manipulate the stiffness of scaffolds; 3) the progress of recent researches to reveal the role of substrate stiffness in cellular responses in some representative tissue-engineered regeneration varying from stiff tissue to soft tissue. This article aims to provide an up-to-date overview of cell mechanobiology research in substrate stiffness mediated cellular response and tissue regeneration with insightful information to facilitate interdisciplinary knowledge transfer and enable the establishment of prognostic markers for the design of suitable biomaterials.

•

Substrate stiffness physically determines cell fate and tissue development.

•

Rational design of scaffolds requires the understanding of cell-matrix interactions.

•

Substrate stiffness depends on scaffold molecular-constituent-structure interaction.

•

Substrate stiffness-mediated cellular responses vary in different tissues.

Antibacterial hydrogels of aromatic tripeptides

Self-assembled peptide hydrogels have emerged as alternatives to the conventional approaches employed in controlled drug release, wound-healing, and drug delivery, and as anti-infective agents. However, peptide hydrogels possessing antibacterial properties are less explored. In this work, we have designed three ultrashort antibacterial peptide hydrogels: Fmoc-FFH-CONH₂, Fmoc-FHF-CONH₂, and Fmoc-HFF-CONH₂. The rheological study showed the higher storage modulus of Fmoc-FFH-CONH₂ (30.43 kPa) compared to Fmoc-FHF-CONH₂ and Fmoc-HFF-CONH₂, which may be attributed to the enhanced aromatic interaction in Fmoc-FFH-CONH₂ compared to the other two variants, resulting in more mechanical rigidity. Further, the prepared hydrogels were evaluated for their inherent antibacterial potency against Gram-positive (Staphylococcus aureus, strain MTCC 96) and Gram-negative (Pseudomonas aeruginosa, strain PA01) bacteria. Antibacterial experiments demonstrated the potency of the hydrogels in the order of Fmoc-FFH-CONH₂ > Fmoc-FHF-CONH₂ > Fmoc-HFF-CONH₂. The antibacterial effect of the hydrogels was predominantly due to the osmotic stress and membrane disruption, which was verified by reactive oxygen species (ROS) generation and outer membrane permeabilization assays. Our findings point to the scope of using the synthesized peptide hydrogels as agents for topical applications.

Mechanical Properties of the Extracellular Environment of Human Brain Cells Drive the Effectiveness of Drugs in Fighting Central Nervous System Cancers

The evaluation of nanomechanical properties of tissues in health and disease is of increasing interest to scientists. It has been confirmed that these properties, determined in part by the composition of the extracellular matrix, significantly affect tissue physiology and the biological behavior of cells, mainly in terms of their adhesion, mobility, or ability to mutate. Importantly, pathophysiological changes that determine disease development within the tissue usually result in significant changes in tissue mechanics that might potentially affect the drug efficacy, which is important from the perspective of development of new therapeutics, since most of the currently used in vitro experimental models for drug testing do not account for these properties. Here, we provide a summary of the current understanding of how the mechanical properties of brain tissue change in pathological conditions, and how the activity of the therapeutic agents is linked to this mechanical state.

AGEs-RAGE axis mediates myocardial fibrosis via activation of cardiac fibroblasts induced by autophagy in heart failure

NEW FINDINGS

What is the central question of this study? Does the AGEs-RAGE axis mediate myocardial fibrosis in heart failure? What is the main finding and its importance? The AGEs-RAGE axis is involved in the pathogenesis of myocardial fibrosis through CFs activation induced by autophagy in heart failure. Inhibiting AGEs-RAGE axis attenuates dysfunction in the heart and attenuates myocardial fibrosis in mice with TAC via suppressing CFs activation.

ABSTRACT

Background: Heart failure is the end stage of cardiovascular diseases, and is a critical medical condition that poses an important therapeutic challenge for physicians due to its high morbidity and mortality. Myocardial fibrosis is part of the remodeling process that occurs in heart failure. Many studies have shown that advanced glycation end products (AGEs) and receptor for advanced glycation end products (RAGE) are implicated in fibrosis and autophagy, but the mechanism remains unclear. In this study, we elucidate the mechanism by which the AGEs-RAGE axis mediates activation of cardiac fibroblasts (CFs) in heart failure.

METHODS AND RESULTS

We used C57BL/6J wild-type (WT) mice to establish a model of heart failure by transverse aortic constriction (TAC). After 6 weeks of treatment, relevant indicators were detected. In mice subjected to TAC, AGEs were upregulated compared with sham mice. Inhibition of RAGE resulted in functional cardiac protection with reduced hypertrophy and fibrosis in mice after TAC. Of note, autophagy mediated the activation of CFs that transformed to myofibroblasts and contributed to fibrosis. In vitro, CFs were obtained from neonatal Sprague-Dawley rats and treated with AGEs-BSA and short hairpin RNA (shRNA) for RAGE, which to verify the results in vivo.

CONCLUSIONS

These results suggest that the AGEs-RAGE axis is involved in the pathogenesis of myocardial fibrosis through CF activation induced by autophagy in heart failure. Inhibiting the AGEs-RAGE axis attenuates dysfunction in the heart and attenuates myocardial fibrosis in mice with TAC via suppressing CF activation. This article is protected by copyright. All rights reserved.

Effects of Titanium Implant Surface Topology on Bone Cell Attachment and Proliferation in vitro

Purpose

Titanium is commonly used for implants because of its corrosion resistance and osseointegration capability. It is well known that surface topology affects the response of bone tissue towards implants. In vivo studies have shown that in weeks or months, bone tissue bonds more efficiently to titanium implants with rough surfaces compared to smooth surfaces. In addition, stimulating early endosseous integration increases the long-term stability of bone-implants and hence their clinical outcome. Here, we evaluated the response of human MG-63 osteoblast-like cells to flat and solid, compared to rough and porous surface topologies in vitro 1–6 days post seeding. We compared the morphology, proliferation, and attachment of cells onto three smooth surfaces: tissue culture (TC) plastic or microscope cover glasses, machined polyether-ether-ketone (PEEK), and machined solid titanium, to cells on a highly porous (average R_a 22.94 μm) plasma-sprayed titanium surface (composite Ti-PEEK spine implants).

Methods

We used immuno-fluorescence (IF) and scanning electron microscopy (SEM), as well as Live/Dead and WST-1 cell proliferation assays.

Results

SEM analyses confirmed the rough topology of the titanium implant surface, compared to the smooth surface of PEEK, solid titanium, TC plastic and cover glasses. In addition, SEM analyses revealed that MG-63 cells seeded onto smooth surfaces (solid titanium, PEEK) adopted a flat, planar morphology, while cells on the rough titanium surface adopted an elongated morphology with numerous filopodial and lamellipodial extensions interacting with the substrate. Finally, IF analyses of focal adhesions (vinculin, focal adhesion kinase), as well as proliferation assays indicate that MG-63 cells adhere less and proliferate at a slower rate on the rough than on a smooth titanium surface.

Conclusion

These observations suggest that bone-forming osteoblasts adhere less strongly and proliferate slower on rough compared to smooth titanium surfaces, likely promoting cell differentiation, which is in agreement with other porous implant materials.

Bioinspired Sandcastle Worm-Derived Peptide-Based Hybrid Hydrogel for Promoting the Formation of Liver Spheroids

The generation of hepatic spheroids is beneficial for a variety of potential applications, including drug development, disease modeling, transplantation, and regenerative medicine. Natural hydrogels are obtained from tissues and have been widely used to promote the growth, differentiation, and retention of specific functionalities of hepatocytes. However, relying on natural hydrogels for the generation of hepatic spheroids, which have batch to batch variations, may in turn limit the previously mentioned potential applications. For this reason, we researched a way to establish a three-dimensional (3D) culture system that more closely mimics the interaction between hepatocytes and their surrounding microenvironments, thereby potentially offering a more promising and suitable system for drug development, disease modeling, transplantation, and regenerative medicine. Here, we developed self-assembling and bioactive hybrid hydrogels to support the generation and growth of hepatic spheroids. Our hybrid hydrogels (PC4/Cultrex) inspired by the sandcastle worm, an Arg-Gly-Asp (RGD) cell adhesion sequence, and bioactive molecules derived from Cultrex BME (Basement Membrane Extract). By performing optimizations to the design, the PC4/Cultrex hybrid hydrogels can enhance HepG2 cells to form spheroids and express their molecular signatures (e.g., Cyp3A4, Cyp7a1, A1at, Afp, Ck7, Ck1, and E-cad). Our study demonstrated that this hybrid hydrogel system offers potential advantages for hepatocytes in proliferating, differentiating, and self-organizing to form hepatic spheroids in a more controllable and reproducible manner. In addition, it is a versatile and cost-effective method for 3D tissue cultures in mass quantities. Importantly, we demonstrate that it is feasible to adapt a bioinspired approach to design biomaterials for 3D culture systems, which accelerates the design of novel peptide structures and broadens our research choices on peptide-based hydrogels.

Platelet lysate functionalized gelatin methacrylate microspheres for improving angiogenesis in endodontic regeneration

Rapid angiogenesis is one of the challenges in endodontic regeneration. Recently, tailored polymeric microsphere system that loaded pro-angiogenic growth factors (GFs) is promising in facilitating vascularization in dental pulp regeneration. In addition, the synergistic effect of multiple GFs is considered more beneficial, but combination usage of them is rather complex and costly. Herein, we aimed to incorporate human platelet lysate (PL), a natural-derived pool of multiple GFs, into gelatin methacrylate (GelMA) microsphere system (GP), which was further modified by Laponite (GPL), a nanoclay with efficient drug delivery ability. These hybrid microspheres were successfully fabricated by electrostatic microdroplet technique with suitable size range (180∼380 µm). After incorporation of the PL and Laponite with GelMA, the Young's modulus of the hybrid hydrogel increased up to about 3-fold and the swelling and degradation rate decreased simultaneously. The PL-derived GFs continued to release up to 28 days from both the GP and GPL microspheres, while the latter released relatively more slowly. What's more, the released GFs could effectively induce tubule formation of human umbilical endothelial cells (HUVECs) and also promote human dental pulp stem cells (hDPSCs) migration. Additionally, the PL component in the GelMA microspheres significantly improved the proliferation, spreading, and odontogenic differentiation of the encapsulated hDPSCs. As further verified by the subcutaneous implantation results, both of the GP and GPL groups enhanced microvascular formation and pulp-like tissue regeneration. This work demonstrated that PL-incorporating GelMA microsphere system was a promising functional vehicle for promoting vascularized endodontic regeneration. STATEMENT OF SIGNIFICANCE: Polymeric microsphere system loaded with pro-angiogenic growth factors (GFs) shows great promise for regeneration of vascularized dental pulp. Herein, we prepared a functional GelMA microsphere system incorporated with human platelet lysates (PL) and nanoclay Laponite by the electrostatic microdroplet method. The results demonstrated that the GelMA/PL/Laponite microspheres significantly improved the spreading, proliferation, and odontogenic differentiation of the encapsulated hDPSCs compared with pure GelMA microspheres. Moreover, they also enhanced microvascular formation and pulp-like tissue regeneration in vivo. This hybrid microsphere system has great potential to accelerate microvessel formation in regenerated dental pulp and other tissues.

Intrinsic Mechanical Cues and Their Impact on Stem Cells and Embryogenesis

Although understanding how soluble cues direct cellular processes revolutionised the study of cell biology in the second half of the 20th century, over the last two decades, new insights into how mechanical cues similarly impact cell fate decisions has gained momentum. During development, extrinsic cues such as fluid flow, shear stress and compressive forces are essential for normal embryogenesis to proceed. Indeed, both adult and embryonic stem cells can respond to applied forces, but they can also detect intrinsic mechanical cues from their surrounding environment, such as the stiffness of the extracellular matrix, which impacts differentiation and morphogenesis. Cells can detect changes in their mechanical environment using cell surface receptors such as integrins and focal adhesions. Moreover, dynamic rearrangements of the cytoskeleton have been identified as a key means by which forces are transmitted from the extracellular matrix to the cell and vice versa. Although we have some understanding of the downstream mechanisms whereby mechanical cues are translated into changes in cell behaviour, many of the signalling pathways remain to be defined. This review discusses the importance of intrinsic mechanical cues on adult cell fate decisions, the emerging roles of cell surface mechano-sensors and the cytoskeleton in enabling cells to sense its microenvironment, and the role of intracellular signalling in translating mechanical cues into transcriptional outputs. In addition, the contribution of mechanical cues to fundamental processes during embryogenesis such as apical constriction and convergent extension is discussed. The continued development of tools to measure the biomechanical properties of soft tissues in vivo is likely to uncover currently underestimated contributions of these cues to adult stem cell fate decisions and embryogenesis, and may inform on regenerative strategies for tissue repair.

Cellular therapy for myocardial ischemia using a temperature-responsive biodegradable injectable polymer system with adipose-derived stem cells

Adipose-derived stem cell (AdSC) has been attracting attention as a convenient stem cell source. Not only AdSC can differentiate into various tissue cells, but it can also accelerate cell proliferation, anti-inflammation, and angiogenesis by secreting paracrine factors. Studies have demonstrated AdSC treatment of ischemic heart. However, an improvement in the remaining live AdSCs administered at the injected site while maintaining paracrine factor secretion is desired to achieve effective regenerative medicine. We previously reported the ABA-type tri-block copolymer of poly(ɛ-caprolactone-co-glycolic acid) and poly(ethylene glycol) (tri-PCG), exhibiting temperature-responsive sol-to-gel transition as biodegradable injectable polymer (IP) systems. Moreover, we recently reported that the biodegradable temperature-triggered chemically cross-linked gelation systems exhibited longer gel state durations using tri-PCG attaching acryloyl groups and a polythiol derivative. In this study, we explored this IP-mediated AdSC delivery system. We investigated the cell viability, mRNA expression, and cytokine secretion of AdSCs cultured in the physical or chemical IP hydrogels. Both of these IP hydrogels retained a certain number of viable cells, and RT-PCR and ELISA analyses revealed that mRNA expression and secretion of vascular endothelial growth factor of the AdSCs cultured in the chemical hydrogel were higher than the physical hydrogel. Moreover, AdSCs injected with the chemical hydrogel into ischemic heart model mice showed longer retention of the cells at the injected site and recovery from the ischemic condition. The results mean that the IP system is a promising candidate for a stem cell delivery system that exhibits the recovery of cardiac function for myocardial infarction treatment.

Vascular Mechanobiology: Homeostasis, Adaptation, and Disease

Cells of the vascular wall are exquisitely sensitive to changes in their mechanical environment. In healthy vessels, mechanical forces regulate signaling and gene expression to direct the remodeling needed for the vessel wall to maintain optimal function. Major diseases of arteries involve maladaptive remodeling with compromised or lost homeostatic mechanisms. Whereas homeostasis invokes negative feedback loops at multiple scales to mediate mechanobiological stability, disease progression often occurs via positive feedback that generates mechanobiological instabilities. In this review, we focus on the cell biology, wall mechanics, and regulatory pathways associated with arterial health and how changes in these processes lead to disease. We discuss how positive feedback loops arise via biomechanical and biochemical means. We conclude that inflammation plays a central role in overriding homeostatic pathways and suggest future directions for addressing therapeutic needs.

Hypergravity affects cell traction forces of fibroblasts

Cells sense and react on changes of the mechanical properties of their environment and, likewise, respond to external mechanical stress applied to them. However, whether the gravitational field as overall body force modulates cellular behavior is unclear. Different studies demonstrated that micro- and hypergravity influences the shape and elasticity of cells, initiate cytoskeleton reorganization, and influence cell motility. All these cellular properties are interconnected and contribute to forces that cells apply on their surrounding microenvironment. Yet, studies that investigated changes of cell traction forces under hypergravity conditions are scarce. Here, we performed hypergravity experiments on 3T3 fibroblast cells using the large-diameter centrifuge at the European Space Agency - European Space Research and Technology Centre. Cells were exposed to hypergravity of up to 19.5 g for 16 h in both the upright and the inverted orientation with respect to the g-force vector. We observed a decrease in cellular traction forces when the gravitational field was increased up to 5.4 g, followed by an increase of traction forces for higher gravity fields up to 19.5 g independent of the orientation of the gravity vector. We attribute the switch in cellular response to shear thinning at low g-forces, followed by significant rearrangement and enforcement of the cytoskeleton at high g-forces.

Vimentin intermediate filaments modulate cell traction force but not cell sensitivity to substrate stiffness

The ability of cells to sense and respond to the mechanical stiffness of the surrounding matrix is important to support normal cell function, wound healing, and development. Central to the process of durosensing is the cytoskeleton composed of three classes of filaments: F-actin, microtubules, and intermediate filaments (IFs). Vimentin is an IF protein that contributes significantly to cell mechanics and cell traction force, which is required to probe extracellular matrix. The role of vimentin in how cells sense and respond to the mechanical rigidity of extracellular matrix is largely unclear. To investigate the role of vimentin in durosensing, we knocked down the vimentin expression level in 3T3 fibroblasts using shRNA transfection and measured cellular responses as functions of substrate stiffness. We quantified durosensitivity by the rates at which cell area and traction force change with substrate stiffness. Our results show that that vimentin plays a role in durosensing by modulating traction force and knocking out vimentin did not significantly affect durosensitivity. These results indicate that vimentin may be a redundant component of the machinery that cells use to sense substrate stiffness.

A spatial model of YAP/TAZ signaling reveals how stiffness, dimensionality, and shape contribute to emergent outcomes

YAP/TAZ is a master regulator of mechanotransduction whose functions rely on translocation from the cytoplasm to the nucleus in response to diverse physical cues. Substrate stiffness, substrate dimensionality, and cell shape are all input signals for YAP/TAZ, and through this pathway, regulate critical cellular functions and tissue homeostasis. Yet, the relative contributions of each biophysical signal and the mechanisms by which they synergistically regulate YAP/TAZ in realistic tissue microenvironments that provide multiplexed input signals remain unclear. For example, in simple two-dimensional culture, YAP/TAZ nuclear localization correlates strongly with substrate stiffness, while in three-dimensional (3D) environments, YAP/TAZ translocation can increase with stiffness, decrease with stiffness, or remain unchanged. Here, we develop a spatial model of YAP/TAZ translocation to enable quantitative analysis of the relationships between substrate stiffness, substrate dimensionality, and cell shape. Our model couples cytosolic stiffness to nuclear mechanics to replicate existing experimental trends, and extends beyond current data to predict that increasing substrate activation area through changes in culture dimensionality, while conserving cell volume, forces distinct shape changes that result in nonlinear effect on YAP/TAZ nuclear localization. Moreover, differences in substrate activation area versus total membrane area can account for counterintuitive trends in YAP/TAZ nuclear localization in 3D culture. Based on this multiscale investigation of the different system features of YAP/TAZ nuclear translocation, we predict that how a cell reads its environment is a complex information transfer function of multiple mechanical and biochemical factors. These predictions reveal a few design principles of cellular and tissue engineering for YAP/TAZ mechanotransduction.

Electrically Conductive and 3D-Printable Oxidized Alginate-Gelatin Polypyrrole:PSS Hydrogels for Tissue Engineering

Electroactive hydrogels can be used to influence cell response and maturation by electrical stimulation. However, hydrogel formulations which are 3D printable, electroactive, cytocompatible, and allow cell adhesion, remain a challenge in the design of such stimuli-responsive biomaterials for tissue engineering. Here, a combination of pyrrole with a high gelatin-content oxidized alginate-gelatin (ADA-GEL) hydrogel is reported, offering 3D-printability of hydrogel precursors to prepare cytocompatible and electrically conductive hydrogel scaffolds. By oxidation of pyrrole, electroactive polypyrrole:polystyrenesulfonate (PPy:PSS) is synthesized inside the ADA-GEL matrix. The hydrogels are assessed regarding their electrical/mechanical properties, 3D-printability, and cytocompatibility. It is possible to prepare open-porous scaffolds via bioplotting which are electrically conductive and have a higher cell seeding efficiency in scaffold depth in comparison to flat 2D hydrogels, which is confirmed via multiphoton fluorescence microscopy. The formation of an interpenetrating polypyrrole matrix in the hydrogel matrix increases the conductivity and stiffness of the hydrogels, maintaining the capacity of the gels to promote cell adhesion and proliferation. The results demonstrate that a 3D-printable ADA-GEL can be rendered conductive (ADA-GEL-PPy:PSS), and that such hydrogel formulations have promise for cell therapies, in vitro cell culture, and electrical-stimulation assisted tissue engineering.

Integrating biomaterials and food biopolymers for cultured meat production

Cultured meat has recently achieved mainstream prominence due to the emergence of societal and industrial interest. In contrast to animal-based production of traditional meat, the cultured meat approach entails laboratory cultivation of engineered muscle tissue. However, bioengineers have hitherto engineered tissues to fulfil biomedical endpoints, and have had limited experience in engineering muscle tissue for its post-mortem traits, which broadly govern consumer definitions of meat quality. Furthermore, existing tissue engineering approaches face fundamental challenges in technical feasibility and industrial scalability for cultured meat production. This review discusses how animal-based meat production variables influence meat properties at both the molecular and functional level, and whether current cultured meat approaches recapitulate these properties. In addition, this review considers how conventional meat producers employ exogenous biopolymer-based meat ingredients and processing techniques to mimic desirable meat properties in meat products. Finally, current biomaterial strategies for engineering muscle and adipose tissue are surveyed in the context of emerging constraints that pertain to cultured meat production, such as edibility, sustainability and scalability, and potential areas for integrating biomaterials and food biopolymer approaches to address these constraints are discussed. STATEMENT OF SIGNIFICANCE: Laboratory-grown or cultured meat has gained increasing interest from industry and the public, but currently faces significant impediment to market feasibility. This is due to fundamental knowledge gaps in producing realistic meat tissues via conventional tissue engineering approaches, as well as translational challenges in scaling up these approaches in an efficient, sustainable and high-volume manner. By defining the molecular basis for desirable meat quality attributes, such as taste and texture, and introducing the fundamental roles of food biopolymers in mimicking these properties in conventional meat products, this review aims to bridge the historically disparate fields of meat science and biomaterials engineering in order to inspire potentially synergistic strategies that address some of these challenges.

Synthesis and characterization of site selective photo-crosslinkable glycidyl methacrylate functionalized gelatin-based 3D hydrogel scaffold for liver tissue engineering

The presented work outlined the development of a new biocompatible hydrogel material that has potential applications in soft tissue engineering. As a proof of concept, human hepatocytes were used to demonstrate the suitability of this material in providing conducive environment for cellular growth and functional development. Herein, a detailed synthesis of novel gelatin derivatives - photo-crosslinkable glycidyl methacrylate (GMA) functionalized gelatins (Gelatin-GMA), and preparation of three-dimensional (3D) hydrogel scaffolds for the encapsulated Huh-7.5 cells is reported. The Gelatin-GMA biopolymers were synthesized at two different pH values of 3.5 (acidic) and 10.5 (basic) where two different photo-crosslinkable polymers were formed utilizing -COOH & -OH groups in acidic pH, and -NH₂ & -OH groups in basic pH. The hydrogels were prepared using an initiator (Irgacure I2959) in the presence of UV light. The Gelatin-GMA biopolymers were characterized using spectroscopic studies which confirmed the successful preparation of the polymer derivatives. Rheological measurement was carried out to characterize the mechanical properties and derive the mesh sizes of the 3D hydrogels. Subsequently, detailed in vitro hepatocyte compatibility and functionality studies were performed in the 3D cell seeded hydrogel platform. The 3D hydrogel design with larger mesh sizes utilizes the advantage of the excellent diffusion properties of porous platform, and enhanced cell-growth was observed, which in turn elicited favorable Huh-7.5 response. The hydrogels led to improved cellular functions such as differentiation, viability and proliferation. Overall, it showed that the Gelatin-GMA based hydrogels presented better results compared to control sample (GelMA) because of the higher mesh sizes in Gelatin-GMA based hydrogels. Additionally, the functional group studies of the two Gelatin-GMA samples revealed that the cell functionalities are almost unaffected even after the tripeptide - Arg-Gly-Asp (RGD) in Gelatin-GMA synthesized at pH 3.5 is no longer completely available.

Developing Bioinspired Three-Dimensional Models of Brain Cancer to Evaluate Tumor-Homing Neural Stem Cell Therapy

Engineered neural stem cells (NSCs) have recently emerged as a promising therapy. Acting as a tumor-homing drug-delivery system, NSCs migrate through brain tissue to seek out primary and invasive tumor foci. NSCs can deliver therapeutic agents, such as TNFα-related apoptosis-inducing ligand, directly to the tumor and suppress glioblastoma (GBM) in murine models. While the mainstays for evaluating NSC migration and efficacy have been two-dimensional chemotaxis assays and mouse models, these low-throughput and small-scale systems limit our ability to implant and track these cells for human translation. To circumvent these challenges, we developed a three-dimensional culture system using a matrix of poly-l-lactic acid 6100 microfibers suspended in agar. These bioinspired brain matrices were used to model tumor growth, NSC migration, and efficacy of NSC therapy at small and human scale. Kinetic fluorescent imaging confirmed growth of tumors in both small and human-sized bioinspired brain matrix. Tumors proliferated 50-fold and 3-fold for GBM and human metastatic breast cancer, respectively, over 7 days. We next explored the impact of tumor location on NSC migration. When NSCs were implanted 2 mm lateral from the tumor foci, NSCs colocalized with the GBM within 7 days. In models of multifocal disease, NSCs were found to colocalize with multiple tumors, preferentially migrating to tumor foci closest to the site of NSC implantation. Lastly, therapeutic NSCs were implanted at increasing distances (0, 2, 5, or 10 mm) laterally from GBM foci to investigate the effects of distance on NSC efficacy. Serial imaging showed reduced fluorescence at tumor sites, implicating GBM apoptosis across all distances. NSCs coinjected with tumor induced a near-complete response in <10 days, while NSCs implanted 10 mm laterally from the tumor induced a near-complete response by day 30. Lastly, GBM foci were established in each hemisphere of the model and control or therapeutic NSCs were implanted adjacent to tumor cells in the right hemisphere. Kinetic imaging showed that NSC therapy attenuated progression of GBM foci, while GBM cells treated with control NSC expanded rapidly over 21 days. In conclusion, we developed a new bioinspired model that supports growth of human brain cancer cells and enables rapid tracking of NSC therapy. Impact statement Tumor-homing and tumor-killing-engineered neural stem cell (NSC) therapies have shown immense promise in both preclinical and clinical trials. However, as cell therapies continue to evolve, cost-effective and high-throughput screening assays are needed to assess the proliferation, migration, and efficacy of these cells. In this study, we developed a bioinspired brain matrix for the evaluation of engineered NSCs. Importantly, this matrix is easy to fabricate, scalable, and allows for sterile real-time, noninvasive imaging using our custom bioreactor. We then utilized the bioinspired brain matrix system to answer key questions around the tumor-homing migration and efficacy of engineered NSC therapies that are challenging to address with traditional models.

Actomyosin and the MRTF-SRF pathway downregulate FGFR1 in mesenchymal stromal cells

Both biological and mechanical signals are known to influence cell proliferation. However, biological signals are mostly studied in two-dimensions (2D) and the interplay between these different pathways is largely unstudied. Here, we investigated the influence of the cell culture environment on the response to bFGF, a widely studied and important proliferation growth factor. We observed that human mesenchymal stromal cells (hMSCs), but not fibroblasts, lose the ability to respond to soluble or covalently bound bFGF when cultured on microfibrillar substrates. This behavior correlated with a downregulation of FGF receptor 1 (FGFR1) expression of hMSCs on microfibrillar substrates. Inhibition of actomyosin or the MRTF/SRF pathway decreased FGFR1 expression in hMSCs, fibroblasts and MG63 cells. To our knowledge, this is the first time FGFR1 expression is shown to be regulated through a mechanosensitive pathway in hMSCs. These results add to the sparse literature on FGFR1 regulation and potentially aid designing tissue engineering constructs that better control cell proliferation.

Cell Shape and Durotaxis Explained from Cell-Extracellular Matrix Forces and Focal Adhesion Dynamics

Many cells are small and rounded on soft extracellular matrices (ECM), elongated on stiffer ECMs, and flattened on hard ECMs. Cells also migrate up stiffness gradients (durotaxis). Using a hybrid cellular Potts and finite-element model extended with ODE-based models of focal adhesion (FA) turnover, we show that the full range of cell shape and durotaxis can be explained in unison from dynamics of FAs, in contrast to previous mathematical models. In our 2D cell-shape model, FAs grow due to cell traction forces. Forces develop faster on stiff ECMs, causing FAs to stabilize and, consequently, cells to spread on stiff ECMs. If ECM stress further stabilizes FAs, cells elongate on substrates of intermediate stiffness. We show that durotaxis follows from the same set of assumptions. Our model contributes to the understanding of the basic responses of cells to ECM stiffness, paving the way for future modeling of more complex cell-ECM interactions.

ECM Stiffness Controls the Activation and Contractility of Corneal Keratocytes in Response to TGF-β1

After surgery or traumatic injury, corneal wound healing can cause a scarring response that stiffens the tissue and impairs ocular function. This fibrosis is caused in part by the activation of corneal keratocytes from a native mechanically quiescent state to an activated myofibroblastic state. This transformation is tied to signaling downstream of transforming growth factor-β1 (TGF-β1). Here, to better understand how biochemical and biophysical cues interact to regulate keratocyte activation and contractility, we cultured primary rabbit corneal keratocytes on flexible substrata of varying stiffness in the presence (or absence) of TGF-β1. Time-lapse fluorescence microscopy was used to assess changes in keratocyte morphology, as well as to quantify the dynamic traction stresses exerted by cells under different experimental conditions. In other experiments, keratocytes were fixed after 5 days of culture and stained for markers of both contractility and myofibroblastic activation. Treatment with TGF-β1 elicited distinct phenotypes on substrata of different stiffnesses. Cells on soft (1 kPa) gels formed fewer stress fibers and retained a more dendritic morphology, indicative of a quiescent keratocyte phenotype. Keratocytes cultured on stiff (10 kPa) gels or collagen-coated glass coverslips, however, had broad morphologies, formed abundant stress fibers, exhibited greater levels of α-smooth muscle actin (α-SMA) expression, and exerted larger traction forces. Confocal images of phospho-myosin light chain (pMLC) immunofluorescence, moreover, revealed stiffness-dependent differences in the subcellular distribution of actomyosin contractility, with pMLC localized at the tips of thin cellular processes in mechanically quiescent cells. Importantly, keratocytes cultured in the absence of TGF-β1 showed no stiffness-dependent differences in α-SMA immunofluorescence, suggesting that a stiff microenvironment alone is insufficient to induce myofibroblastic activation. Taken together, these data suggest that changes in ECM stiffness can modulate the morphology, cytoskeletal organization, and subcellular pattern of force generation in corneal keratocytes treated with TGF-β1.

Migration of the 3T3 Cell with a Lamellipodium on Various Stiffness Substrates—Tensegrity Model

Changes in mechanical stimuli and the physiological environment are sensed by the cell. Thesechanges influence the cell’s motility patterns. The cell’s directional migration is dependent on the substrate stiffness. To describe such behavior of a cell, a tensegrity model was used. Cells with an extended lamellipodium were modeled. The internal elastic strain energy of a cell attached to the substrates with different stiffnesses was evaluated. The obtained results show that on the stiffer substrate, the elastic strain energy of the cell adherent to this substrate decreases. Therefore, the substrate stiffness is one of the parameters that govern the cell’s directional movement.

Alginate/laponite hydrogel microspheres co-encapsulating dental pulp stem cells and VEGF for endodontic regeneration

Considering the complicated and irregular anatomical structure of root canal systems, injectable microspheres have received considerable attention as cell carriers in endodontic regeneration. Herein, we developed injectable hybrid RGD-alginate/laponite (RGD-Alg/Lap) hydrogel microspheres, co-encapsulating human dental pulp stem cells (hDPSCs) and vascular endothelial growth factor (VEGF). These microspheres were prepared by the electrostatic microdroplet method with an average size of 350~450 μm. By adjusting the content of laponite, the rheological properties and the degradation rate of the microspheres in vitro could be conditioned. The release of VEGF from the RGD-Alg/0.5%Lap microspheres was in a sustained manner for 28 days while the bioactivity of VEGF was preserved. In addition, the encapsulated hDPSCs were evenly distributed in microspheres with a cell viability exceeding 85%. The deposition of abundant extracellular matrix such as fibronectin (FN) and collagen type I (Col-I) was shown in microspheres after 7 days. The laponite in the system significantly up-regulated the expression of odontogenic-related genes of hDPSCs at day 7. Furthermore, after subcutaneous implantation with tooth slices in a nude mouse model for 1 month, the hDPSCs-laden RGD-Alg/0.5%Lap+VEGF microspheres significantly promoted the regeneration of pulp-like tissues as well as the formation of new micro-vessels. These results demonstrated the great potential of laponite-enhanced hydrogel microspheres in vascularized dental pulp regeneration. STATEMENT OF SIGNIFICANCE: Injectable cell-laden microspheres have recently gained great attention in endodontic regeneration. Here we first developed hybrid alginate/laponite hydrogel microspheres (size about 350~450 μm) by electrostatic microdroplet method, which exhibited tunability in mechanical property and sustained release ability. The incorporation of laponite and the sustained release of VEGF supported not only dental pulp stem cells differentiation in vitro but neotissue regeneration in vivo. These features combined with the simplicity in preparation, made the microspheres ideally suited to simultaneous cells and growth factors delivery in dental pulp regeneration and even other tissue regeneration application.

Development of a Dual Hydrogel Model System for Vascularization

Numerous hydrogel-based culture systems are used to create in vitro model for prevascularization. Hydrogels used to induce a microenvironment conducive to microvessel formation are typically soft and fast degradable, but often suffer from maintaining a lasting perfusable channel in vitro. Here, a dual hydrogel system that consists of photo-crosslinkable gelatin methacrylate (GelMA) and polyethylene glycol dimethacrylate (PEGDMA) is reported. GelMA hydrogels present soft and rapidly degradable properties and show microporous structures while PEGDMA is relatively stiff, almost nondegradable in vitro, and less porous. The dual hydrogel system is sequentially photo-crosslinked to construct an endothelial cell (EC)-lined perfusable PEGDMA channel and surrounding GelMA for endothelial vascular networks. Such dual hydrogel system exhibits seamless integration of the stiff PEGDMA channel and the surrounding soft GelMA, and facilitates rapid EC sprouting and extensive microvessel formation from a stable endothelium on the PEGDMA channel into the GelMA. Furthermore, diffusivity of biomolecules in the perfusable dual hydrogel system is affected by both the structural and physicochemical properties of the hydrogel system and the microvascular networks formed in the system. The establishment of the dual hydrogel system for vascularization holds great promise as an in vitro angiogenesis model and prevascularization strategy of large tissue constructs.

Distinct phenotypes of cancer cells on tissue matrix gel

BACKGROUND

Breast cancer cells invading the connective tissues outside the mammary lobule or duct immerse in a reservoir of extracellular matrix (ECM) that is structurally and biochemically distinct from that of their site of origin. The ECM is a spatial network of matrix proteins, which not only provide physical support but also serve as bioactive ligands to the cells. It becomes evident that the dimensional, mechanical, structural, and biochemical properties of ECM are all essential mediators of many cellular functions. To better understand breast cancer development and cancer cell biology in native tissue environment, various tissue-mimicking culture models such as hydrogel have been developed. Collagen I (Col I) and Matrigel are the most common hydrogels used in cancer research and have opened opportunities for addressing biological questions beyond the two-dimensional (2D) cell cultures. Yet, it remains unclear whether these broadly used hydrogels can recapitulate the environmental properties of tissue ECM, and whether breast cancer cells grown on CoI I or Matrigel display similar phenotypes as they would on their native ECM.

METHODS

We investigated mammary epithelial cell phenotypes and metabolic profiles on animal breast ECM-derived tissue matrix gel (TMG), Col I, and Matrigel. Atomic force microscopy (AFM), fluorescence microscopy, acini formation assay, differentiation experiments, spatial migration/invasion assays, proliferation assay, and nuclear magnetic resonance (NMR) spectroscopy were used to examine biological phenotypes and metabolic changes. Student's t test was applied for statistical analyses.

RESULTS

Our data showed that under a similar physiological stiffness, the three types of hydrogels exhibited distinct microstructures. Breast cancer cells grown on TMG displayed quite different morphologies, surface receptor expression, differentiation status, migration and invasion, and metabolic profiles compared to those cultured on Col I and Matrigel. Depleting lactate produced by glycolytic metabolism of cancer cells abolished the cell proliferation promoted by the non-tissue-specific hydrogel.

CONCLUSION

The full ECM protein-based hydrogel system may serve as a biologically relevant model system to study tissue- and disease-specific pathological questions. This work provides insights into tissue matrix regulation of cancer cell biomarker expression and identification of novel therapeutic targets for the treatment of human cancers based on tissue-specific disease modeling.

ROLE OF OXYGEN CONCENTRATION IN THE OSTEOBLASTS BEHAVIOR: A FINITE ELEMENT MODEL

Oxygen concentration plays a key role in cell survival and viability. Besides, it has important effects on essential cellular biological processes such as cell migration, differentiation, proliferation and apoptosis. Therefore, the prediction of the cellular response to the alterations of the oxygen concentration can help significantly in the advances of cell culture research. Here, we present a 3D computational mechanotactic model to simulate all the previously mentioned cell processes under different oxygen concentrations. With this model, three cases have been studied. Starting with mesenchymal stem cells within an extracellular matrix with mechanical properties suitable for its differentiation into osteoblasts, and under different oxygen conditions to evaluate their behavior under normoxia, hypoxia and anoxia. The obtained results, which are consistent with the experimental observations, indicate that cells tend to migrate toward zones with higher oxygen concentration where they accelerate their differentiation and proliferation. This technique can be employed to control cell migration toward fracture zones to accelerate the healing process. Besides, as expected, to avoid cell apoptosis under conditions of anoxia and to avoid the inhibition of the differentiation and proliferation processes under conditions of hypoxia, the state of normoxia should be maintained throughout the entire cell-culture process.

Ratiometric Nanoviscometers: Applications for Measuring Cellular Physical Properties in 3D Cultures

New insights into the biomechanical properties of cells are revealing the importance of these properties and how they relate to underlying molecular, architectural, and behavioral changes associated with cell state and disease processes. However, the current understanding of how these in vitro biomechanical properties are associated with in vivo processes has been developed based on the traditional monolayer (two-dimensional [2D]) cell culture, which traditionally has not translated well to the three-dimensional (3D) cell culture and in vivo function. Many gold standard methods and tools used to observe the biomechanical properties of 2D cell cultures cannot be used with 3D cell cultures. Fluorescent molecules can respond to external factors almost instantaneously and require relatively low-cost instrumentation. In this review, we provide the background on fluorescent molecular rotors, which are attractive tools due to the relationship of their emission quantum yield with environmental microviscosity. We make the case for their use in both 2D and 3D cell cultures and speculate on their fundamental and practical applications in cell biology.

Stiffness Sensing by Cells

Physical stimuli are essential for the function of eukaryotic cells, and changes in physical signals are important elements in normal tissue development as well as in disease initiation and progression. The complexity of physical stimuli and the cellular signals they initiate are as complex as those triggered by chemical signals. One of the most important, and the focus of this review, is the effect of substrate mechanical properties on cell structure and function. The past decade has produced a nearly exponentially increasing number of mechanobiological studies to define how substrate stiffness alters cell biology using both purified systems and intact tissues. Here we attempt to identify common features of mechanosensing in different systems while also highlighting the numerous informative exceptions to what in early studies appeared to be simple rules by which cells respond to mechanical stresses.

Combination of the Silver-Ethylene Interaction and 3D Printing To Develop Antibacterial Superporous Hydrogels for Wound Management

Due to insufficient biomedical functions of hydrogels for wound management, the exploitation of available methods to expand the biomedical functions of hydrogels always becomes the cutting-edge research. Here, we report on the use of the silver-ethylene interaction and 3D printing technique to develop the antibacterial superporous polyacrylamide (PAM)/hydroxypropyl methylcellulose (HPMC) hydrogel dressings. Experiments demonstrated that the silver-ethylene interaction played significant roles in mediating the formation, dispersion, and cross-linking of silver nanoparticles (AgNPs) in the hydrogel matrix as well as the cross-linking of the PAM networks. At the same time, such organometallic complexes also controlled the release of AgNPs to balance the cytocompatibility and antibacterial activity of the AgNP-cross-linked hydrogels. On the other hand, the use of 3D printed templates and HPMC as the pore-making materials demonstrated could tailor hydrogels into 91.4% porosity and the formed pores into open channels, endowing hydrogels with rapid water uptake rate and 14 times dead-weight of uptake capacity. Furthermore, experiments showed that the regular large pores arisen from 3D printed templates could buffer the swelling of superporous hydrogel dressings, thus decreasing the detachment risk of dressings from wounds. In vivo experiments demonstrated that the AgNP-cross-linked superporous hydrogel dressings could promote the healing of the infected wounds and restrain scar tissue formation.

Evaluation of polydimethylsiloxane-based substrates for in vitro culture of human periodontal ligament cells

Periodontal ligament (PDL) cells are regarded as the cell type with the highest potential for periodontal regeneration. Biophysical cues of the culture substrate are increasingly identified as vital parameters to affect cell behavior. Compared to traditional tissue culture polystyrene (TCPS), polydimethylsiloxane (PDMS) substrates corroborate more closely the elastic modulus values of the physiological environment. Consequently, the aim of this study was to evaluate the effect of PDMS-based substrates with different stiffness on cellular responses of human PDL cells. PDMS substrates with different stiffness were fabricated by varying the ratio of base to curing component. The influence of PDMS substrates on PDL cell spreading and cytoskeletal morphologies, motility, proliferation, stemness gene expression, and osteogenic differentiation was evaluated and compared to that on conventional TCPS. PDL cells cultured on PDMS substrates exhibited a smaller cell size and more elongated morphology, with less spreading area, fewer focal adhesions, and faster migration than cells on TCPS. Compared to TCPS, PDMS substrates promoted the rapid in vitro expansion of PDL cells without interfering with their self-renewal ability. In contrast, the osteogenic differentiation ability of PDL cells cultured on PDMS was lower in comparison to cells on TCPS. PDL cells on PDMS exhibited similar cell morphology, motility, proliferation, and self-renewal gene expression. The stiffer PDMS substrate increased the osteogenic gene expression of PDL cells compared to the soft PDMS group in one donor. These data indicate that PDMS-based substrates have the potential for the efficient PDL cell expansion.

Surface Micro- and Nanoengineering: Applications of Layer-by-Layer Technology as a Versatile Tool to Control Cellular Behavior

Extracellular matrix (ECM) cues have been widely investigated for their impact on cellular behavior. Among mechanics, physics, chemistry, and topography, different ECM properties have been discovered as important parameters to modulate cell functions, activating mechanotransduction pathways that can influence gene expression, proliferation or even differentiation. Particularly, ECM topography has been gaining more and more interest based on the evidence that these physical cues can tailor cell behavior. Here, an overview of bottom-up and top-down approaches reported to produce materials capable of mimicking the ECM topography and being applied for biomedical purposes is provided. Moreover, the increasing motivation of using the layer-by-layer (LbL) technique to reproduce these topographical cues is highlighted. LbL assembly is a versatile methodology used to coat materials with a nanoscale fidelity to the geometry of the template or to produce multilayer thin films composed of polymers, proteins, colloids, or even cells. Different geometries, sizes, or shapes on surface topography can imply different behaviors: effects on the cell adhesion, proliferation, morphology, alignment, migration, gene expression, and even differentiation are considered. Finally, the importance of LbL assembly to produce defined topographical cues on materials is discussed, highlighting the potential of micro- and nanoengineered materials to modulate cell function and fate.

Mechanical Durotactic Environment Enhances Specific Glioblastoma Cell Responses

Background: A hallmark of glioblastoma is represented by their ability to widely disperse throughout the brain parenchyma. The importance of developing new anti-migratory targets is critical to reduce recurrence and improve therapeutic efficacy. Methods: Polydimethylsiloxane substrates, either mechanically uniform or presenting durotactic cues, were fabricated to assess GBM cell morphological and dynamical response with and without pharmacological inhibition of NNMII contractility, of its upstream regulator ROCK and actin polymerization. Results: Glioma cells mechanotactic efficiency varied depending on the rigidity compliance of substrates. Morphologically, glioma cells on highly rigid and soft bulk substrates displayed bigger and elongated aggregates whereas on durotactic substrates the same cells were homogeneously dispersed with a less elongated morphology. The durotactic cues also induced a motility change, cell phenotype dependent, and with cells being more invasive on stiffer substrates. Pharmacological inhibition of myosin or ROCK revealed a rigidity-insensitivity, unlike inhibition of microfilament contraction and polymerization of F-actin, suggesting that alternative signalling is used to respond to durotactic cues. Conclusions: The presence of a distinct mechanical cue is an important factor in cell migration. Together, our results provide support for a durotactic role of glioma cells that acts through actomyosin contractility to regulate the aggressive properties of GBM cells.

Gaussian Curvature Directs Stress Fiber Orientation and Cell Migration

We show that substrates with nonzero Gaussian curvature influence the organization of stress fibers and direct the migration of cells. To study the role of Gaussian curvature, we developed a sphere-with-skirt surface in which a positive Gaussian curvature spherical cap is seamlessly surrounded by a negative Gaussian curvature draping skirt, both with principal radii similar to cell-length scales. We find significant reconfiguration of two subpopulations of stress fibers when fibroblasts are exposed to these curvatures. Apical stress fibers in cells on skirts align in the radial direction and avoid bending by forming chords across the concave gap, whereas basal stress fibers bend along the convex direction. Cell migration is also strongly influenced by the Gaussian curvature. Real-time imaging shows that cells migrating on skirts repolarize to establish a leading edge in the azimuthal direction. Thereafter, they migrate in that direction. This behavior is notably different from migration on planar surfaces, in which cells typically migrate in the same direction as the apical stress fiber orientation. Thus, this platform reveals that nonzero Gaussian curvature not only affects the positioning of cells and alignment of stress fiber subpopulations but also directs migration in a manner fundamentally distinct from that of migration on planar surfaces.