Summary review of the health effects associated with phenol

Evaluating efficacy and outcomes: comparison of laser treatment and crystallized phenol in pilonidal sinus disease

Objective

The aim of this study is to comprehensively evaluate the efficacy of laser ablation and crystallized phenol application in the treatment of pilonidal sinus disease, focusing on treatment success, recurrence rates, complications, and the patients' return to normal life.

Material and method

Data from patients treated for pilonidal sinus disease with laser ablation and crystallized phenol application at our clinic between January 2020 and September 2023 were retrospectively reviewed. Preoperative data including pit counts, disease stage, preoperative pilonidal abscess history, disease duration (week), treatment success, recurrence/persistent disease, postoperative complications, healing time (days), and visual analogue scale (VAS) scores on postoperative days 1 and 7, as well as return to normal life (days), were analyzed.

Results

A total of 121 patients were included in the study, with 51 receiving laser ablation and 70 receiving crystallized phenol application. The postoperative outcomes revealed that the wound healing period and postoperative VAS values were statistically significantly better in the laser ablation group.

Conclusion

Wound healing was faster and postoperative pain was less in the laser group compared to the phenol group. According to this study, both methods can successfully treat the disease in selected cases.

Combined experimental and molecular dynamics removal processes of contaminant phenol from simulated wastewater by polyethylene terephthalate microplastics

Microplastics (MPs) and phenolics are pollutants found ubiquitously in freshwater systems. MPs oftentimes serve as a vector for pollutants across ecosystems and are now being explored as alternative adsorbents for pollutant removal. This strategy would reflect the 'reuse' of an existing waste stream into a potentially useful product while at the same time helping to minimize plastic waste in the marine environment. In this study, the adsorption of phenol onto pristine (Pr-PET), modified (Mod-PET), and aged (Ag-PET) Polyethylene Terephthalate (PET) microplastics was examined experimentally and theoretically. Kinetics, isotherms, and thermodynamics models were used to investigate the adsorption process while Grand Canonical Monte Carlo (GCMC) and molecular dynamics (MD) simulations were employed to investigate molecular level alterations. The result showed that the Ag-PET MPs had the best removal efficiency due larger surface area and the adsorption occurred in a pseudo-second-order manner, showing that the rate of phenol adsorption is directly proportional to the number of surface-active sites on the surface of PET MPs while the intraparticle diffusion defined rate-limiting step. However, the maximum monolayer adsorption capacity followed Mod-PET (38.02 mg/g) > Ag-PET (8.08 mg/g) > Pr-PET (6.84 mg/g). The adsorption process proceeded spontaneously and thermodynamically favourable. GCMC-MD simulations revealed that PET MPs are capable of successfully adsorbing the phenol molecule through Van der Waals and electrostatic interactions and can be adopted as novel adsorbents for phenol removal in aqueous solutions.

Development of tenofovir monobenzyl ester phosphonoamidate prodrugs with improved anti-hepatitis B virus activity and intrahepatic tenofovir enrichment

Various tenofovir (TFV) prodrugs have been developed by introducing masking groups to the hydroxyls of the monophosphonate group to enhance intestinal absorption efficiency and therapeutic effects. However, the reported TFV prodrugs have drawbacks such as low bioavailability, systemic toxicity caused by their breakdown in non-targeted tissues, and potential low intracellular conversion efficiency. In the present study, we developed a class of TFV monobenzyl ester phosphonoamidate prodrugs without substitutions on the benzene ring. Compared with previous TFV prodrugs, compounds 3a and 3b developed in the present study showed higher anti-hepatitis B virus activity, stronger stability and higher levels of intrahepatic enrichment of the metabolic product (TFV), indicating the potential of these compounds as novel prodrugs with high efficiency and low systemic toxicity for the treatment of hepatitis B.

Non-excisional techniques for the treatment of intergluteal pilonidal sinus disease: a systematic review

Non-excisional techniques for pilonidal sinus disease (PSD) have gained popularity over the last years. The aim of this study was to review short and long-term outcomes for non-excisional techniques with special focus on the additive effect of treatment of the inner lining of the sinus cavity and the difference between primary and recurrent PSD. A systematic search was conducted in Embase, Medline, Web of Science Core Collection, Cochrane and Google Scholar databases for studies on non-excisional techniques for PSD including pit picking techniques with or without additional laser or phenol treatment, unroofing, endoscopic techniques and thrombin gelatin matrix application. Outcomes were recurrence rates, healing rates, complication rates, wound healing times and time taken to return to daily activities. In total, 31 studies comprising 8100 patients were included. Non-excisional techniques had overall healing rates ranging from 67 to 100%. Recurrence rates for pit picking, unroofing and gelatin matrix application varied from 0 to 16% depending on the follow-up time. Recurrence rates after additional laser, phenol and endoscopic techniques varied from 0 to 29%. Complication rates ranged from 0 to 16%, and the wound healing time was between three and forty-seven days. The return to daily activities varied from one to nine days. Non-excisional techniques are associated with fast recovery and low morbidity but recurrence rates are high. Techniques that attempt to additionally treat the inner lining of the sinus have worse recurrence rates than pit picking alone. Recurrence rates do not differ between primary and recurrent disease.

Source apportionment of gaseous Nitrophenols and their contribution to HONO formation in an urban area

Nitrophenols (NPs) have significant impacts on human health, climate, and atmospheric chemistry. Despite numerous measurements of particulate NPs, still little is known about their gaseous atmospheric abundances, sources, and fate. Here, four gaseous NPs [2,4-dinitrophenol (2,4-DNP), 4-nitrophenol (4-NP), 2-nitrophenol (2-NP), and 2-Methyl-4-nitrophenol (2-Me-4-NP)] were continuously monitored during late Spring at an urban site in Houston, Texas. Among the four NPs, 4-NP showed the highest abundance, followed by 2-Me-4-NP, 2-NP, and 2,4-DNP with average concentrations of 1.07 ± 0.19 ppt, 0.47 ± 0.12 ppt, 0.41 ± 0.16 ppt, and 0.27 ± 0.09 ppt, respectively. The positive matrix factorization (PMF) model identified seven sources: industrial NPs, secondary formation, phenol sources, acetonitrile source, natural gas/crude oil, traffic, and petrochemical industries/oil refineries. A zero-dimensional photochemical box model was used to simulate the observed 2-NP and 2,4-DNP. A 50.0% and 70.0% jNO2 was found to be consistent with the measured 2-NP and 2,4-DNP. This yields a nitrous acid (HONO) production of 7.5 ± 2.5 ppt/h from 06:00 to 18:00 Central Standard Time (CST) from both NPs. An extrapolation including other known NPs suggests a maximum HONO formation of 13.8 ppt/h. The results of this study suggest that using PMF analysis supplemented by photochemical box model provides identification of the NPs sources and their atmospheric implication to HONO formation.

Volatile organic compounds measured by proton transfer reaction mass spectrometry over the complex terrain of Quintero Bay, Central Chile

This research provides new evidence regarding the different kinds of air quality episodes, and their underlying mechanisms, that frequently impact the urban area of Quintero Bay in Central Chile, which is located along complex coastal terrain and is surrounded by industries. The monitoring campaign was carried out in January 2022 and encompassed two distinctive meteorological regimes. The first part of the month was dominated by a coastal low centered to the south of Quintero, which resulted in prevailing northerly flow (or weak southerlies) and a deep cloud-topped marine boundary layer. After a 2-3-day transition, the latter collapsed, and a clear-sky regime ensued, which was characterized by a shallow boundary layer and strong southerly winds during the daytime that lasted until the end of the campaign. By using proton transfer reaction time of flight mass spectrometry (PTR-TOF-MS) at a high temporal resolution (1 s), we measured high levels of volatile organic compounds (VOCs) during air quality episodes in real time. The episodes detected were associated with different prevailing meteorological regimes, suggesting that different point sources were involved. In the first episode, propene/cyclopropane, butenes, benzene, toluene and ethylbenzene/xylenes were associated with north and northwesterly weak winds. Complaints associated with hydrocarbon odor were reported. The pollution originated from industrial and petrochemical units located to the north of Quintero, which transport and store natural gas, liquified petroleum gas and oil. The second episode was linked to an oil refinery located south of our measurement site. In this case, high levels of phenol, furan and cresols occurred under strong southwesterly winds. During this event, headaches and dizziness were reported. By contrast, the levels of other aromatic compounds (benzene, toluene, ethylbenzene/xylenes) were lower than in the first air pollution episode.

Syringol, a wildfire residual methoxyphenol causes cytotoxicity and teratogenicity in zebrafish model

Natural toxicants, particularly methoxy phenols (MPs) generated by wildfire lignin, can accumulate in the environment, and cause serious health hazards in living organisms. Although the toxicity of MPs such as guaiacol and catechol has recently been described, there is minimal evidence of ecotoxicological effects of syringol. As a result, this study focuses on determining the toxicity by evaluating the cytotoxic and teratogenic effects of syringol in vitro and in vivo in human embryonic kidney (HEK-293) cells and zebrafish embryos, respectively. The ecotoxicity of syringol was predicted to be 63.8 mg/L using the ECOSAR (ECOlogical Structure Activity Relationship) prediction tool, and molecular docking analysis was used to determine the interaction and binding affinities of syringol with human apoptotic proteins in silico. In HEK-293 cells, exposure of syringol (0.5-2 mg/L) has induced cytotoxicity in a concentration-dependent manner. In zebrafish larvae, exposure of syringol (0.5-2 mg/L) has induced dose-dependent embryo toxic effects (or growth abnormalities such as yolk sac edema, pericardial edema, skeletal abnormality, and hyperemia), and changes in growth morphometrics (head height, eye, yolk sac, and pericardial area, heart rate) in particular, the heart rate of larvae was found to be significantly decreased (p<0.001). After a 4-day experimental trial, the accumulated concentration of syringol in zebrafish larvae was confirmed both qualitatively (HPLC-MS - High Performance Liquid Chromatography-Mass spectrometry) and quantitatively (LC-QTOF-HRMS - Liquid Chromatography-Quadrupolar Time of Flight-High Resolution Mass spectrometry). The craniofacial abnormalities induced by syringol exposure (0.5-2 mg/L) were detected as anomalies in cartilaginous development and locomotor deficits using alcian blue staining and locomotor analyses, respectively. Significant increase in oxidative stress parameters (including reactive oxygen species generation, lipid peroxidation, superoxide dismutase, catalase, lactate dehydrogenase and nitric oxide production) (p<0.001) and substantial decrease in glutathione levels were observed (p<0.05) in syringol exposed zebrafish larvae through enzymatic analysis. Additionally, through acridine orange staining and gene expression analyses, syringol (2 mg/L) was found to activate apoptosis in zebrafish larvae. Considering the cytotoxic, embryotoxic (teratogenicity), and oxidative stress-related apoptotic effects of syringol in the zebrafish model, syringol has the potential to emerge as a potent environmental toxicant posing serious health hazards in many living systems; however, further research on its toxicological effects on the actual ecosystem and in higher animal models is required to confirm its consequences.

Mechanism of phenol and p-nitrophenol adsorption on kaolinite surface in aqueous medium: A molecular dynamics study

Very few aqueous medium experimental studies focus on the molecular interaction mechanism between the adsorbent and the adsorbate. Herein, we investigate the adsorption of two organic pollutants, phenol and p-nitrophenol (PNP) in dilute aqueous solution conditions on kaolinite (001) surface through classical molecular dynamics (MD) simulations. The present investigation addresses both adsorption isotherms and mechanistic issues. MD simulations at different solute concentrations generated density profiles and, thereby, adsorption isotherms. The data generated for phenol adsorption fitted both Langmuir and Freundlich isotherm models equally well. Alternatively, PNP adsorption data on the kaolinite surface followed the Langmuir model better. Overall, phenol exhibits a higher adsorption capacity on kaolinite than PNP. These results support the experimental observations made in earlier publications in the literature. Radial distribution functions (RDF) between various atom types on the adsorbent and molecules in the solution phase point toward hydrogen bond-dominated interaction mechanisms for organic pollutants.

Copper-Catalyzed Direct Syntheses of Phenoxypyrimidines from Chloropyrimidines and Arylboronic Acids: A Cascade Avenue and Unconventional Substrate Pairs

This letter describes the first synthetic methodology for phenoxypyrimidines that avoids the direct use of phenols or their salts. In contrast to the general trend of delivering Suzuki-Miyaura cross-coupling products in reactions between aryl or alky halides and arylboronic acids, the substrate pairs used herein (chloropyrimidines and arylboronic acids) led to C-O bond formation under the reaction conditions. In total, 25 phenoxypyrimidines were successfully synthesized using the described protocol, 6 of which had a structural resemblance to etravirine.

Activation of persulfate by LaFe1-xCoxO3 perovskite catalysts for the degradation of phenolics: Effect of synthetic method and metal substitution

The presence of resistant organic pollutants in environmental substrates requires the development and finding of novel decontamination methods. Advanced oxidation processes are among the most effective methods used for degradation of these pollutants through their oxidation and degradation into non-toxic and harmless, for the environment, final products. Ιn this research, a series of perovskites of ABO₃-type, with La and Fe and/or Co in A and B positions respectively, LaFe_1-xCo_xO₃ (x = 0, 0.25, 0.5, 0.75, 1), were synthesized with two different methods, a soft template method using anionic surfactant and by glycine combustion method and studied for their catalytic activity towards the degradation of phenolic compounds, a major class of environmental pollutants, through persulfate activation. The catalytic activity depended both by the B metal ion of perovskites and their ratio as well as by the synthesis method. LaCoO₃ prepared with the anionic surfactant method, showed the highest catalytic activity with a rate constant of 0.024 min^-1. Furthermore, the synthesis method also influenced the stability of perovskites as metal leaching studies showed that perovskites synthesized with the anionic surfactant showed greater stability. Quenching experiments were also used in order to shed light on the catalytic activation mechanism of persulfate for the degradation of phenolics. Overall, the results showed that the synthesis method can significantly affect the catalytic activity of the materials and their stability since the same materials synthesized with different methods show significantly different catalytic properties.

Facile Fabrication of 1-Methylimidazole/Cu Nanozyme with Enhanced Laccase Activity for Fast Degradation and Sensitive Detection of Phenol Compounds

Facile construction of functional nanomaterials with laccase-like activity is important in sustainable chemistry since laccase is featured as an efficient and promising catalyst especially for phenolic degradation but still has the challenges of high cost, low activity, poor stability and unsatisfied recyclability. In this paper, we report a simple method to synthesize nanozymes with enhanced laccase-like activity by the self-assembly of copper ions with various imidazole derivatives. In the case of 1-methylimidazole as the ligand, the as-synthesized nanozyme (denoted as Cu-MIM) has the highest yield and best activity among the nanozymes prepared. Compared to laccase, the K_m of Cu-MIM nanozyme to phenol is much lower, and the v_max is 6.8 times higher. In addition, Cu-MIM maintains excellent stability in a variety of harsh environments, such as high pH, high temperature, high salt concentration, organic solvents and long-term storage. Based on the Cu-MIM nanozyme, we established a method for quantitatively detecting phenol concentration through a smartphone, which is believed to have important applications in environmental protection, pollutant detection and other fields.

Human risk assessment of 4-n-nonylphenol (4-n-NP) using physiologically based pharmacokinetic (PBPK) modeling: analysis of gender exposure differences and application to exposure analysis related to large exposure variability in population

As a toxic substance, 4-n-nonylphenol (4-n-NP) or 4-nonylphenol (4-NP) is widely present in the environment. 4-n-NP is a single substance with a linear-alkyl side chain, but 4-NP usually refers to a random mixture containing various branched types. Unfortunately, human risk assessment and/or exposure level analysis for 4-n-NP (or 4-NP) were almost nonexistent, and related research was urgently needed. This study aimed to analyze the various exposures of 4-n-NP (or 4-NP) through development of a physiologically based-pharmacokinetic (PBPK) model considering gender difference in pharmacokinetics of 4-n-NP and its application to human risk assessment studies. A PBPK model was newly developed considering gender differences in 4-n-NP pharmacokinetics and applied to a human risk assessment for each gender. Exposure analysis was performed using a PBPK model that considered gender differences in 4-n-NP (or 4-NP) exposure and high variabilities in several countries. Furthermore, an extended application was attempted as a human risk assessment for random mixture 4-NP, which is difficult to accurately evaluate in reality. External-exposure and margin-of-safety estimated with the same internal exposure amount differed between genders, meaning the need for a differentiated risk assessment considering gender. Exposure analysis based on biomonitoring data confirmed large variability in exposure to 4-n-NP (or 4-NP) by country, group, and period. External-exposures estimated using PBPK model varied widely, ranging from 0.039 to 63.875 mg/kg/day (for 4-n-NP or 4-NP). By country, 4-n-NP (or 4-NP) exposure was higher in females than in males and the margin-of-safety tended to be low. Overall, exposure to 4-n-NP (or 4-NP) in populations was largely not safe, suggesting need for ongoing management and monitoring. Considering low in vivo accumulation confirmed by PBPK model, risk reduction of 4-n-NP is possible by reducing its use.

Exploratory study of removing nutrients from aqueous environments employing a green synthesised nano zero-valent iron

This study explores the green synthesis of nano zero-valent iron (nZVI) extracted from the peel of selected waste fruits: banana (BP), mango (MP), and pomegranate (GP), for the removal of nutrients from aqueous environments. The extract was prepared by heating de-ionised water at 60°C for 5 min, adding a reducing and a stabilising agent, FeCl₃, then stirring with a N₂ gas flush solution to form iron nanoparticles, with a final drying step under N₂ conditions. Using a variety of characterisation techniques, it was determined that nZVI particles were successfully synthesised via the reduction of iron (III) to iron (0) and stabilised by the presence of phenolic compounds in the extract. The removal of 20 mg/L nutrients from an aqueous solution carried out using the nZVIs resulted in nitrate removal of 92% (nZVI-GP), 88% (nZVI-BP), and 72% (nZVI-MP) within 5 min, whereas ∼98% phosphate was removed by all three nZVIs within 60 min. The aging effect was also tested. Aging the nZVIs for >20 days resulted in less efficient phosphate adsorption after exposure for 250 min; ∼70% phosphate removal was achieved using the nZVIs under these conditions. The mechanisms and pathways of nitrate reduction, including the adsorption of phosphate by nZVI were demonstrated, and discussed. Leachability tests of the phosphate-loaded nZVIs revealed that 10%, 28%, and 48% phosphate was released from the nZVI-GP, nZVI-BP, and nZVI-MP particles, respectively. Using waste fruit is, therefore, a viable and sustainable alternative to the traditional sodium borohydride method to produce nZVIs for environmental application.

German National Guideline on the management of pilonidal disease: update 2020

BACKGROUND

The present German National Guideline is an updated version of previous Guideline published in 2014. It aims to compare various treatment methods and to assist physicians with evidence-based recommendations.

METHODS

Systemic literature review.

RESULTS

Three types of disease manifestation could be differentiated: asymptomatic disease, an acute abscess, and the chronic pilonidal disease. At present, there is no treatment method fulfilling all desired criteria: simple, painless procedure associated with rapid wound healing, and low recurrence rate. Thus, treatment modality should be tailored to disease manifestation and extent.

CONCLUSION

Asymptomatic pilonidal disease should not be treated. A pilonidal abscess should be unroofed. After resolution of the acute inflammation, the disease should be treated definitely. As for today, sinus excision is the standard treatment of the chronic pilonidal disease. Wide excision and open treatment of chronic disease is a safe procedure which, however, leads to prolonged secondary healing and time off-work, as well as to considerable recurrence rate. The extent of excision should be as limited as possible. Excision and midline wound closure is associated with impaired outcomes. Today, it has become obsolete. Minimally invasive procedures (e.g., pit picking surgery) represent a treatment option for chronic pilonidal disease. However, the recurrence rate is higher compared to excision procedures. Nevertheless, they may be used for small primary disease. Off-midline procedures should be used for disease not suitable for minimally invasive treatments. The Limberg flap and the Karydakis procedure are two best described methods which are associated with similar short- and long-term results.

Titania-Clay Mineral Composites for Environmental Catalysis and Photocatalysis

The use of titania-based composite materials in the field of heterogeneous catalysis and photocatalysis has a long and rich history. Hybrid structures combining titania nanoparticles with clay minerals have been extensively investigated for nearly four decades. The attractiveness of clay minerals as components of functional materials stems primarily from their compositional versatility and the possibility of using silicate lamellae as prefabricated building blocks ready to be fitted into the desired nanoconstruction. This review focuses on the evolution over the years of synthetic strategies employed for the manufacturing of titania–clay mineral composites with particular attention to the role of the adopted preparative approach in shaping the physical and chemical characteristics of the materials and enabling, ultimately, tuning of their catalytic and/or photocatalytic performance.

Facile fabrication of antibacterial and antiviral perhydrolase-polydopamine composite coatings

In situ generation of antibacterial and antiviral agents by harnessing the catalytic activity of enzymes on surfaces provides an effective eco-friendly approach for disinfection. The perhydrolase (AcT) from Mycobacterium smegmatis catalyzes the perhydrolysis of acetate esters to generate the potent disinfectant, peracetic acid (PAA). In the presence of AcT and its two substrates, propylene glycol diacetate and H₂O₂, sufficient and continuous PAA is generated over an extended time to kill a wide range of bacteria with the enzyme dissolved in aqueous buffer. For extended self-disinfection, however, active and stable AcT bound onto or incorporated into a surface coating is necessary. In the current study, an active, stable and reusable AcT-based coating was developed by incorporating AcT into a polydopamine (PDA) matrix in a single step, thereby forming a biocatalytic composite onto a variety of surfaces. The resulting AcT-PDA composite coatings on glass, metal and epoxy surfaces yielded up to 7-log reduction of Gram-positive and Gram-negative bacteria when in contact with the biocatalytic coating. This composite coating also possessed potent antiviral activity, and dramatically reduced the infectivity of a SARS-CoV-2 pseudovirus within minutes. The single-step approach enables rapid and facile fabrication of enzyme-based disinfectant composite coatings with high activity and stability, which enables reuse following surface washing. As a result, this enzyme-polymer composite technique may serve as a general strategy for preparing antibacterial and antiviral surfaces for applications in health care and common infrastructure safety, such as in schools, the workplace, transportation, etc.

Can it make me white again? A case report of 88% phenol as a depigmenting agent in vitiligo

Vitiligo is the most common depigmenting disorder. However, therapies prove to be time-consuming, costly, or slow to show efficacy. Here, we present a case of a 74-year-old female with vitiligo who underwent full-body depigmentation treatment 50 years ago. Brown patches of repigmentation appeared on the patient’s face and arms and were eventually treated with 88% phenol. Patient was later switched to compounded 3% glutathione cream for a more sustained effect. Phenol was an accessible, economical, and easily administrable therapeutic option that can result in short-term depigmentation.

Biohybrid membranes for effective bacterial vehiculation and simultaneous removal of hexavalent chromium (CrVI) and phenol

The aim of the present study was to obtain an effective vehiculation system in which bacterial agents could maintain viability improving their removal capacity. Herein, we present a novel biohybrid membrane of polymeric nanofibers and free-living bacteria for the simultaneous removal of pollutants. In this system, bacteria are free within the pores between the nanofibers and adsorbed to the surface of the membranes. Association between bacteria and the membranes was performed through a self-formulated medium, and the presence of the bacteria in the polymeric matrix was evidenced through atomic force microscopy (AFM). Biohybrid membranes associated with the remediation agents Bacillus toyonensis SFC 500-1E and Acinetobacter guillouiae SFC 500-1A promoted a reduction of up to 2.5 mg/L of hexavalent chromium and up to 200 mg/L of phenol after 24 h of treatment in synthetic medium containing the contaminants. Similarly, more than 46% of the hexavalent chromium and all of the phenol content were removed after treatment of a tannery effluent with initial concentrations of 7 mg/L of Cr(VI) and 305 mg/L of phenol. Counts of the remediation agents from the membranes were always above 1.10⁷ CFU/g, also in the reutilization assays performed without reinoculation. Biohybrid membranes were hydrolysis-resistant, reusable, and effective in the simultaneous removal of contaminants for more than 5 cycles. Viability of the microorganisms was maintained after long-term storage of the membranes at 4 °C, without the use of microbiological media or the addition of cryoprotectants. Graphical abstract KEY POINTS: • Polymeric membranes were effectively associated with the SFC 500-1 remediation consortium • Biohybrid membranes removed hexavalent chromium and phenol from different matrices • Removal of contaminants was achieved in many successive cycles without reinoculation.

Treatment of agrochemical wastewater by subcritical water oxidation method: chemical composition and ion analysis of treated and untreated samples

This work aimed at offering an effective and environmentally friendly approach to the real wastewater of an industrial agrochemicals production plant containing high amounts of many hazardous compounds that threaten human health. The removal of total organic carbon (TOC) (59.45%) and colour (97.92%) of the wastewater was achieved using subcritical water oxidation method. The fate of the detected compounds was followed by GC-MS analysis. Several pollutants such as phenol, fumaric acid, chlorpyrifos, penconazole, brassilexin, buprofezin, etoxazole, pyriproxyfen and 2-naphthalene-sulphonic acid which are bio-refractory and harmful to human health, were effectively degraded. Inorganic ions exist in the wastewater or formed through the process and their possible effects on the applied method were analysed. The central composite design was used to optimise the method and fully evaluate the single or combined effects of the method parameters on the removal rates. The precision of the applied design models was evaluated employing ANOVA, Regression coefficients and validation analysis. F and P and R² values were obtained as 107.43, <0.0001, and 0.9898, respectively in the TOC removal model and 39.45, <0.0001, and 0.9726 in the colour removal model.[Formula: see text].

In vitro Edwardsiella piscicida CK108 Transcriptome Profiles with Subinhibitory Concentrations of Phenol and Formalin Reveal New Insights into Bacterial Pathogenesis Mechanisms

Phenol and formalin are major water pollutants that are frequently discharged into the aquatic milieu. These chemicals can affect broad domains of life, including microorganisms. Aquatic pollutants, unlike terrestrial pollutants, are easily diluted in water environments and exist at a sub-inhibitory concentration (sub-IC), thus not directly inhibiting bacterial growth. However, they can modulate gene expression profiles. The sub-IC values of phenol and formalin were measured by minimal inhibitory concentration (MIC) assay to be 0.146% (1.3 mM) and 0.0039% (0.38 mM), respectively, in Edwardsiella piscicida CK108, a Gram-negative fish pathogen. We investigated the differentially expressed genes (DEG) by RNA-seq when the cells were exposed to the sub-ICs of phenol and formalin. DEG analyses revealed that genes involved in major virulence factors (type I fimbriae, flagella, type III and type VI secretion system) and various cellular pathways (energy production, amino acid synthesis, carbohydrate metabolism and two-component regulatory systems) were up- or downregulated by both chemicals. The genome-wide gene expression data corresponded to the results of a quantitative reverse complementary-PCR and motility assay. This study not only provides insight into how a representative fish pathogen, E. piscicida CK108, responds to the sub-ICs of phenol and formalin but also shows the importance of controlling chemical pollutants in aquatic environments.

Syntrophic metabolism of phenol in the anodic degradation within a Phenol-Cr(VI) coupled microbial electrolysis cell

Bioelectrochemical system (BESs) has been applied to treat refractory wastewaters such as phenolic wastewater since microbial anodic oxidation driven by electroactive bacteria is believed to enhance decomposition of organic matters. Considering that most of electroactive bacteria are sensitive to phenol and cannot utilize it directly, it was assumed that fermentative bacteria and electroactive bacteria in mixed-culture BESs cooperated to degrade phenol. To clarify this assumption, a microbial electrolysis cell (MEC) for phenol degradation with Cr(VI)-reduction bio-cathode was developed in this study. Results showed that phenol served as anodic electron donor was more efficient than acetate for cathodic reduction of Cr(VI) since the slow release of acetate from phenol degradation with fermentative bacteria might make full use of acetate as electron donor for anodic oxidation. The production of quorum sensing (QS) signal molecules were higher in phenolic anolyte, confirming the syntrophic metabolism among phenol-degrading bacteria and electroactive bacteria. Cyclic voltammetry (CV) test and Fourier transform infrared spectroscopy (FT-IR) indicated that phenolic anolyte and anodic sludge had higher electron transfer ability due to enhanced bio-electrochemisty processes in syntrophic metabolism.

Effect of Process Parameters on the Photocatalytic Degradation of Phenol in Oilfield Produced Wastewater using ZnO/Fe2O3 Nanocomposites

The upstream processing of crude oil is often associated with the presence of phenolic compounds when not properly treated could result in adverse effects on human health. The objective of the study was to investigate the effect of process parameters on the photocatalytic degradation of phenol. The ZnO/Fe2O3 nanocomposite photocatalyst was prepared by sol-gel method and characterized using various instrument techniques. The characterized ZnO/Fe2O3 nanocomposite displayed suitable physicochemical properties for the photocatalytic reaction. The ZnO/Fe2O3 nanocomposite was employed for the phenol degradation in a cylindrical batch reactor under solar radiation. The photocatalytic runs show that calcination temperature of the ZnO/Fe2O3 nanocomposite, catalyst loading, initial phenol concentration and pH of the wastewater significantly influence the photocatalytic degradation of phenol. After 180 min of solar radiation, the highest phenol degradation of 92.7% was obtained using the ZnO/Fe2O3 photocatalyst calcined at 400 ºC. This study has demonstrated that phenol degradation is significantly influenced by parameters such as calcination temperature of the ZnO/Fe2O3 nanocomposite, catalyst loading, initial phenol concentration and pH of the wastewater resulting in highest phenol degradation using the ZnO/Fe2O3 nanocomposite calcined at 400 ºC, initial phenol concentration of 0.5 mg/L, catalyst loading of 3 mg/L and pH of 3. Copyright © 2020 by Authors, Published by BCREC Group. This is an open access article under the CC BY-SA License (https://creativecommons.org/licenses/by-sa/4.0). 

Gas chromatographic determination of phenol in fish tissues as a phenyl acetate derivative following solvent extraction of acidified samples

This study aimed to develop a chromatographic method to quantitatively determine phenol in fish tissues. This method involves solvent extraction of acidified samples, followed by derivatization to phenyl acetate and analysis with gas chromatography coupled with mass spectrometry (GC–MS). Phenol in a representative tissue sample (belly, gill, or renal tubules), which was homogenized with 2 N sulfuric acid, was extracted with ethyl acetate and derivatized to phenyl acetate using acetic anhydride and K2CO3 in water. An n-butyl acetate extract was injected into the GC–MS. The linearity (r2) of the calibration curve was greater than 0.996. The analytical repeatability, which is expressed as the relative standard deviation, was less than 6.14%, and the recovery was greater than 96.3%. The method detection limit and the limit of quantitation were 8.0 μg/kg and 26 μg/kg, respectively. The proposed method is also applicable to the analysis of other biological tissues for phenol and its analogs, such as pentachlorophenol.

A New Route for Low Pressure and Temperature CWAO: A PtRu/MoS2_Hyper-Crosslinked Nanocomposite

PtRu/MoS₂ nanoparticles (NPs) (PtRu alloy partially coated by one-layer MoS₂ nanosheets) were prepared through a ‘wet chemistry’ approach. The obtained NPs were directly embedded, at 5 parts per hundred resin/rubber (phr) loading, in a poly (divinylbenzene-co-vinyl benzyl chloride) hyper-crosslinked (HCL) resin, synthesized via bulk polymerization of the resin precursors, followed by conventional FeCl₃ post-crosslinking. The obtained HCL nanocomposites were characterized to evaluate the effect of the NPs. It shows a high degree of crosslinking, a good dispersion of NPs and a surface area up to 1870 ± 20 m²/g. The catalytic activity of the HCL nanocomposite on phenol wet air oxidation was tested at low air pressure (P_air = 0.3 MPa) and temperature (T = 95 °C), and at different phenol concentrations. At the lower phenol concentration, the nanocomposite gives a total organic carbon (TOC) conversion of 97.1%, with a mineralization degree of 96.8%. At higher phenol concentrations, a phenol removal of 99.9%, after 420 min, was achieved, indicating a quasi-complete depletion of phenol, with a TOC conversion of 86.5%, corresponding to a mineralization degree of 84.2%. Catalyst fouling was evaluated, showing good reusability of the obtained nanocomposite.

The Influence of Solution pH on the Kinetics of Resorcinol Electrooxidation (Degradation) on Polycrystalline Platinum

Electrochemical oxidation of resorcinol on a polycrystalline platinum electrode was investigated in five different solutions, namely 0.5 and 0.1 M H2SO4, 0.5 M Na2SO4, 0.5 and 0.1 M NaOH. The rates of electrochemical degradation of resorcinol were determined based on the obtained reaction parameters, such as resistance, capacitance and current-density. The electrochemical analyses (cyclic voltammetry and a.c. impedance spectroscopy) were carried-out by means of a three-compartment, Pyrex glass cell. These results showed that the electrochemical oxidation of resorcinol is strongly pH-dependent. In addition, the energy dispersive X-ray (EDX) spectroscopy technique was employed for Pt electrode surface characterization. Additionally, the quantitative determination of resorcinol removal was performed by means of instrumental high-performance liquid chromatography/mass spectrometry (HPLC/MS) methodology.

Geochemical characterization and renal cell toxicity of water-soluble extracts from U.S. Gulf Coast lignite

An assortment of organic material can leach from lignite (low-rank coal) in water, and the water-soluble fraction from lignite has been associated with adverse health effects in areas of the Balkans. Recent efforts have been made to evaluate this hypothesis in other areas where lignite is in contact with groundwater like in the U.S. Gulf Coast region. In this study, five Gulf Coast lignite samples were extracted with water, and the water-soluble portion of the coal was then characterized by total organic carbon, UV-Vis spectroscopy, and gas chromatography/mass spectrometry. Additionally, human kidney cells (HK-2) were exposed to water-soluble extracts of Gulf Coast lignite to assess toxicity. Cell viability was measured, and a dose-response curve was used to generate IC₅₀ values that ranged from 490 to 3000 ppm. The most toxic extract (Dolet Hills) was from Louisiana where lignite-derived organic material has been previously linked to high incidence of renal pelvic cancer. Concentrations of nephrotoxic metals (As, Cd, Co, Cu, Hg, Pb, V, Zn) were screened and were below those considered toxic to renal cells. We conclude that leachates from lignite do indeed have toxic affects on cultured human renal cells. Although the IC₅₀ values are higher than the concentration of organic matter in the local groundwater, typically < 5 ppm, the effects of long-term low-level exposure is not known.

Fatal Ingestion of Chlumsky Disinfectant Solution

A 32-year-old pregnant woman in the 25th week of pregnancy underwent oral glucose tolerance screening at the diabetologist's. Later that day, she was found dead in her apartment possibly poisoned with Chlumsky disinfectant solution (solutio phenoli camphorata). An autopsy revealed chemical burns in the digestive system. The lungs and the brain showed signs of severe edema. The blood of the woman and fetus was analyzed using gas chromatography with mass spectrometry and revealed phenol, its metabolites (phenyl glucuronide and phenyl sulfate) and camphor. No ethanol was found in the blood samples. Both phenol and camphor are contained in Chlumsky disinfectant solution, which is used for disinfecting surgical equipment in healthcare facilities. Further investigation revealed that the deceased woman had been accidentally administered a disinfectant instead of a glucose solution by the nurse, which resulted in acute intoxication followed by the death of the pregnant woman and the fetus.

Immobilization of tyrosinase on polyacrylonitrile beads: biodegradation of phenol from aqueous solution and the relevant cytotoxicity assessment

An economical and stabilized immobilized-enzyme method was developed for the removal of phenol in wastewater.

Controlled Defects of Zinc Oxide Nanorods for Efficient Visible Light Photocatalytic Degradation of Phenol

Environmental pollution from human and industrial activities has received much attention as it adversely affects human health and bio-diversity. In this work we report efficient visible light photocatalytic degradation of phenol using supported zinc oxide (ZnO) nanorods and explore the role of surface defects in ZnO on the visible light photocatalytic activity. ZnO nanorods were synthesized on glass substrates using a microwave-assisted hydrothermal process, while the surface defect states were controlled by annealing the nanorods at various temperatures and were characterized by photoluminescence and X-ray photoelectron spectroscopy. High performance liquid chromatography (HPLC) was used for the evaluation of phenol photocatalytic degradation. ZnO nanorods with high surface defects exhibited maximum visible light photocatalytic activity, showing 50% degradation of 10 ppm phenol aqueous solution within 2.5 h, with a degradation rate almost four times higher than that of nanorods with lower surface defects. The mineralization process of phenol during degradation was also investigated, and it showed the evolution of different photocatalytic byproducts, such as benzoquinone, catechol, resorcinol and carboxylic acids, at different stages. The results from this study suggest that the presence of surface defects in ZnO nanorods is crucial for its efficient visible light photocatalytic activity, which is otherwise only active in the ultraviolet region.

Electrical stimulation on biodegradation of phenol and responses of microbial communities in conductive carriers supported biofilms of the bioelectrochemical reactor

Conductive carbon felts (Cf) were used as biofilm carriers in bioelectrochemical reactors to enhance the electrical stimulation on treatment of phenol-containing synthetic wastewater. In batch test, phenol biodegradation was accelerated under an optimum direct current (DC), which was 2mA for Cf biofilm carriers, lower than that for non-conductive white foam carriers. The stimulation effect was consistent with Adenosine Triphosphate contents in biofilms. The long-term operation further demonstrated that a high and stable phenol removal efficiency could be achieved with applied DC of 2mA, and intermittent DC application was better than continuous one, with phenol removal efficiency of over 97%. Although the quantities of whole microbial communities kept at a high level under all conditions, special microorganisms related with genera of Zoogloea and Desulfovibrio were distinctively enriched under intermittent applied DC pattern. This study shows that the electrical stimulation is potentially effective for biofilm reactors treating phenol-containing wastewater.