Removal of phenol and bisphenol-A catalyzed by laccase in aqueous solution

Exploring the decolorization efficiency and biodegradation mechanisms of different functional textile azo dyes by Streptomyces albidoflavus 3MGH

Efficiently mitigating and managing environmental pollution caused by the improper disposal of dyes and effluents from the textile industry is of great importance. This study evaluated the effectiveness of Streptomyces albidoflavus 3MGH in decolorizing and degrading three different azo dyes, namely Reactive Orange 122 (RO 122), Direct Blue 15 (DB 15), and Direct Black 38 (DB 38). Various analytical techniques, such as Fourier Transform Infrared (FTIR) spectroscopy, High-Performance Liquid Chromatography (HPLC), and Gas Chromatography-Mass Spectrometry (GC-MS) were used to analyze the degraded byproducts of the dyes. S. albidoflavus 3MGH demonstrated a strong capability to decolorize RO 122, DB 15, and DB 38, achieving up to 60.74%, 61.38%, and 53.43% decolorization within 5 days at a concentration of 0.3 g/L, respectively. The optimal conditions for the maximum decolorization of these azo dyes were found to be a temperature of 35 °C, a pH of 6, sucrose as a carbon source, and beef extract as a nitrogen source. Additionally, after optimization of the decolorization process, treatment with S. albidoflavus 3MGH resulted in significant reductions of 94.4%, 86.3%, and 68.2% in the total organic carbon of RO 122, DB 15, and DB 38, respectively. After the treatment process, we found the specific activity of the laccase enzyme, one of the mediating enzymes of the degradation mechanism, to be 5.96 U/mg. FT-IR spectroscopy analysis of the degraded metabolites showed specific changes and shifts in peaks compared to the control samples. GC-MS analysis revealed the presence of metabolites such as benzene, biphenyl, and naphthalene derivatives. Overall, this study demonstrated the potential of S. albidoflavus 3MGH for the effective decolorization and degradation of different azo dyes. The findings were validated through various analytical techniques, shedding light on the biodegradation mechanism employed by this strain.

Decolorization and detoxication of malachite green by engineered Saccharomyces cerevisiae expressing novel thermostable laccase from Trametes trogii

Malachite Green (MG) is a widely used industrial dye that is hazardous to health. Herein, the decolourisation and detoxification of MG were achieved using the engineered Saccharomyces cerevisiae expressing novel thermostable laccase lcc1 from Trametes trogii. The engineered strain RCL produced a high laccase activity of 121.83 U L-1. Lcc1 was stable at temperatures ranging from 20 ℃ to 60 ℃ and showed a high tolerance to organic solvents. Moreover, Lcc1 could decolorize different kinds of dyes (azo, anthraquinone and triphenylmethane), among which, the decolorization ability of MG is the highest, reaching 95.10 %, and the decolorization rate of other triphenylmethane dyes also over 50 %. The RCL decolorized about 95 % of 50 mg L-1 of MG dye in 10 h at 30 ℃. The MG degradation products were analyzed. The industrial application potential of the RCL was evaluated by treating industrial wastewater and the decolourisation rates were over 90 %.

A review on recent advancements in extraction, removal and recovery of phenols from phenolic wastewater: Challenges and future outlook

Water pollution is the major problem seen in today's scenario and even pollutants at low concentration harms our environment. In industrial sector usage of phenol is seen even at low concentrations. The interaction of phenol in the environment provides adverse effects to living beings. This review focuses on the toxicity of phenol and its impact towards environment and human health. The treatment techniques such as distillation, extraction, wet air oxidation, membrane process, electrochemical oxidation, biological treatment and finally adsorption techniques were discussed. Among many treatment techniques so far utilized in the treatment of phenol, adsorption was considered as one of the best technique due to its advantages such as reusability, ease in operation, large availability etc., This review also highlights the adsorption technique for the cleaner removal of phenol from aqueous solution with novel as well as low-cost adsorbents in the removal of phenolic compounds. This review also discusses about the drawbacks and issues related with adsorption of phenolic compounds.

Bisphenol A contamination in aquatic environments: a review of sources, environmental concerns, and microbial remediation

The production of polycarbonate, a high-performance transparent plastic, employs bisphenol A, which is a prominent endocrine-disrupting compound. Polycarbonates are frequently used in the manufacturing of food, bottles, storage containers for newborns, and beverage packaging materials. Global production of BPA in 2022 was estimated to be in the region of 10 million tonnes. About 65-70% of all bisphenol A is used to make polycarbonate plastics. Bisphenol A leaches from improperly disposed plastic items and enters the environment through wastewater from plastic-producing industries, contaminating, sediments, surface water, and ground water. The concentration BPA in industrial and domestic wastewater ranges from 16 to 1465 ng/L while in surface water it has been detected 170-3113 ng/L. Wastewater treatment can be highly effective at removing BPA, giving reductions of 91-98%. Regardless, the remaining 2-9% of BPA will continue through to the environment, with low levels of BPA commonly observed in surface water and sediment in the USA and Europe. The health effects of BPA have been the subject of prolonged public and scientific debate, with PubMed listing more than 17,000 scientific papers as of 2023. Bisphenol A poses environmental and health hazards in aquatic systems, affecting ecosystems and human health. While several studies have revealed its presence in aqueous streams, environmentally sound technologies should be explored for its removal from the contaminated environment. Concern is mostly related to its estrogen-like activity, although it can interact with other receptor systems as an endocrine-disrupting chemical. Present review article encompasses the updated information on sources, environmental concerns, and sustainable remediation techniques for bisphenol A removal from aquatic ecosystems, discussing gaps, constraints, and future research requirements.

Structural insights, biocatalytic characteristics, and application prospects of lignin-modifying enzymes for sustainable biotechnology-A review

Lignin modifying enzymes (LMEs) have gained widespread recognition in depolymerization of lignin polymers by oxidative cleavage. LMEs are a robust class of biocatalysts that include lignin peroxidase (LiP), manganese peroxidase (MnP), versatile peroxidase (VP), laccase (LAC), and dye-decolorizing peroxidase (DyP). Members of the LMEs family act on phenolic, non-phenolic substrates and have been widely researched for valorization of lignin, oxidative cleavage of xenobiotics and phenolics. LMEs implementation in the biotechnological and industrial sectors has sparked significant attention, although its potential future applications remain underexploited. To understand the mechanism of LMEs in sustainable pollution mitigation, several studies have been undertaken to assess the feasibility of LMEs in correlating to diverse pollutants for binding and intermolecular interactions at the molecular level. However, further investigation is required to fully comprehend the underlying mechanism. In this review we presented the key structural and functional features of LMEs, including the computational aspects, as well as the advanced applications in biotechnology and industrial research. Furthermore, concluding remarks and a look ahead, the use of LMEs coupled with computational frameworks, built upon artificial intelligence (AI) and machine learning (ML), has been emphasized as a recent milestone in environmental research.

Synthesis of magnetically recyclable porous cross-linked aggregates of Tramates versicolor MTCC 138 laccase for the efficient removal of pentachlorophenol from aqueous solution

The primary objective of this study is to synthesize the magnetically separable highly active porous immobilized laccase for the removal of pentachlorophenol (PCP) in an aqueous solution. Magnetic porous cross-linked enzyme aggregates (Mp-CLEAs) of laccase were synthesized using 1% starch solution with 5 mM glutaraldehyde followed by 10 h of cross-linking time with an activity recovery of 90.85 ± 0.2%. The biocatalytic efficiency of magnetic porous CLEAs (Mp-CLEAs) was 2-fold higher than that of magnetic CLEAs. The synthesized Mp-CLEAs were mechanically stable with enhanced catalytic efficiency, and reusability thus overcoming the mass transfer limitations and enzyme loss. At 40 °C, the thermal stability of the magnetic porous immobilized laccase was improved, with a 602 min half-life compared to 207 min half-life for the free enzyme. Using 40 U/mL of laccase for the removal of 100 ppm of PCP, M-CLEAs, and Mp-CLEAs removed 60.44% and 65.53% of PCP, respectively. Furthermore, to enhance PCP removal, a laccase-aided system was harnessed by optimizing various surfactants and mediators. Of these, 0.1 mM of rhamnolipid and 2,3 dimethoxy phenol had the highest PCP removal rates of 95.12% and 99.41%, respectively, for Mp-CLEAs. This study demonstrates the efficacy of the laccase-surfactant-mediator system for the removal of PCP from the aqueous solution, which can also be proposed for real-time application.

Purification and biochemical characterization of two laccase isoenzymes isolated from Trichoderma harzianum S7113 and its application for bisphenol A degradation

Two laccase isoenzymes (LacA and LacB) were isolated from a novel Trichoderma harzianum S7113 isolate employing ammonium sulfate precipitation, Sephadex G100, and DEAE Sepharose ion exchange chromatography. The molecular weights of the purified LacA and LacB laccases were estimated to be 63 and 48 kDa, respectively. The two isoenzymes had their optimum activities at the same temperature (50 °C), but at slightly different pH values (pH 3.0 for LacA and pH 2.5 for LacB). LacA and LacB had the same thermal stability at 40 °C and pH stability at pH 9.0. The two isoenzymes also showed a high level of specific activity toward ABTS, where the K_m values of LacA and LacB were 0.100 and 0.065 mM, whereas their V_max values were 0.603 and 0.182 µmol min^-1, respectively. LacA and LacB catalytic activity was stimulated by Mg²⁺, Zn²⁺, K⁺, and Ni²⁺, whereas it was inhibited by Hg²⁺ and Pb²⁺, β-mercaptoethanol, EDTA, and SDS, and completely inhibited by sodium azide. Our findings indicate that purified laccase has a promising capacity for bisphenol A (BPA) bioremediation across a broad pH range. This finding opens up new opportunities for the commercialization of this technique in a variety of biotechnology-based applications, particularly for removing endocrine chemicals from the environment.

Microbial detoxification of lignocellulosic biomass hydrolysates: Biochemical and molecular aspects, challenges, exploits and future perspectives

Valorization of lignocellulosic biomass (LB) has the potential to secure sustainable energy production without impacting food insecurity, whist relieving over reliance on finite fossil fuels. Agro-derived lignocellulosic residues such as wheat straw, switchgrass, rice bran, and miscanthus have gained relevance as feedstocks for the production of biofuels and chemicals. However, the microorganisms employed in fermentative conversion of carbohydrates to fuels and chemicals are unable to efficiently utilize the sugars derived from LB due to co-production of lignocellulose-derived microbial inhibitory compounds (LDMICs) during LB pretreatment. LDMICs impact microbial growth by inhibition of specific enzymes, cause DNA and cell membrane damage, and elicit cellular redox imbalance. Over the past decade, success has been achieved with the removal of LDMICs prior to fermentation. However, LDMICs removal by chemical processes is often accompanied by sugar losses, which negatively impacts the overall production cost. Hence, in situ removal of LDMICs by fermentative organisms during the fermentation process has garnered considerable attention as the "go-to" approach for economical LDMICs detoxification and bio-chemicals production. In situ removal of LDMICs has been pursued by either engineering more robust biocatalysts or isolating novel microbial strains with the inherent capacity to mineralize or detoxify LDMICs to less toxic compounds. While some success has been made along this line, efficient detoxification and robust production of target bio-chemicals in lignocellulosic hydrolysates (LHs) under largely anaerobic fermentative conditions remains a lingering challenge. Consequently, LB remains an underutilized substrate for bio-chemicals production. In this review, the impact of microbial LH detoxification on overall target molecule production is discussed. Further, the biochemical pathways and mechanisms employed for in situ microbial detoxification of furanic LDMICs [e.g., furfural and 5-hydroxymethylfurfural (HMF)] and phenolic LDMICs (e.g., syringaldehyde, p-coumaric acid, 4-hydroxybenzaldehyde, vanillin, and ferulic acid) are discussed. More importantly, metabolic engineering strategies for the development of LDMIC-tolerant and bio-chemicals overproducing strains and processes are highlighted.

Genome mining reveals abiotic stress resistance genes in plant genomes acquired from microbes via HGT

Colonization by beneficial microbes can enhance plant tolerance to abiotic stresses. However, there are still many unknown fields regarding the beneficial plant-microbe interactions. In this study, we have assessed the amount or impact of horizontal gene transfer (HGT)-derived genes in plants that have potentials to confer abiotic stress resistance. We have identified a total of 235 gene entries in fourteen high-quality plant genomes belonging to phyla Chlorophyta and Streptophyta that confer resistance against a wide range of abiotic pressures acquired from microbes through independent HGTs. These genes encode proteins contributed to toxic metal resistance (e.g., ChrA, CopA, CorA), osmotic and drought stress resistance (e.g., Na⁺/proline symporter, potassium/proton antiporter), acid resistance (e.g., PcxA, ArcA, YhdG), heat and cold stress resistance (e.g., DnaJ, Hsp20, CspA), oxidative stress resistance (e.g., GST, PoxA, glutaredoxin), DNA damage resistance (e.g., Rad25, Rad51, UvrD), and organic pollutant resistance (e.g., CytP450, laccase, CbbY). Phylogenetic analyses have supported the HGT inferences as the plant lineages are all clustering closely with distant microbial lineages. Deep-learning-based protein structure prediction and analyses, in combination with expression assessment based on codon adaption index (CAI) further corroborated the functionality and expressivity of the HGT genes in plant genomes. A case-study applying fold comparison and molecular dynamics (MD) of the HGT-driven CytP450 gave a more detailed illustration on the resemblance and evolutionary linkage between the plant recipient and microbial donor sequences. Together, the microbe-originated HGT genes identified in plant genomes and their participation in abiotic pressures resistance indicate a more profound impact of HGT on the adaptive evolution of plants.

The effect of dissolved natural organic matter on adsorption of phenolic compounds on suspended sediments

Phenolic compounds have caused different degrees of negative impacts in aquatic environment. Amino acids, humic acids and carbohydrates are the three dominant types of dissolved natural organic matter (DNOM) in natural water bodies. In this research, the influences of dissolved natural organic matter (DNOM) on the adsorption behaviors of phenol, 2,4-dichlorophenol (DCP) and 2,4,6-trichlorophenol (TCP) in Weihe River suspended sediment were studied by using DL-alanine, fulvic acid and glucose as the representatives of the three types of DNOM. The results of batch adsorption experiments showed that, without DNOM, Langmuir and Freundlich had good fitting effects on the three phenolic compounds and their maximum adsorption capacities were 21.580, 27.768 and 24.758 mg/kg respectively. The presence of amino acids increased adsorption capacities of the phenol and TCP on suspended sediments by approximately 13.84% and 11.56% respectively. The existence of fulvic acid and glucose positively affected the adsorption of phenol, DCP and TCP on suspended sediment. The isothermal adsorption in the coexistence of different DNOM were more consistent with the nonlinear adsorption. Other influence factors including pH, ionic strength and temperature can influence the adsorption behavior to different extents. The impact of dissolved natural organic matter (DNOM) on adsorption should be fully considered when mastering environmental migration and transformation behaviors of phenolic compounds in water-sediments environment.

Biodegradation of di-n-octyl phthalate by Gordonia sp. Lff and its application in soil

A previous isolated Gordonia sp. (Lff) was used to degrade di-n-octyl phthalate (DOP) contamination in both aqueous solution and soil. The influence of temperature, pH, inoculum size, salt content and initial concentration of DOP on DOP degradation by Lff were analysed. The response of soil bacterial community to DOP and Lff was also analysed by Illumina MiSeq sequence method. Results showed that the optimal temperature, pH, inoculum size and salt content were 35^oC, 8.0, 5% and <5%, respectively. Under the optimal condition, more than 91.25% of DOP with different initial concentrations (100-2000 mg/L) could be degraded by Lff. Kinetics analysis indicated that biodegradation of DOP by Lff could be described by first-order kinetics (R² > 0.917) with the half-life (t_1/2) changing irregularly between 0.58 and 0.83 d. In addition, Lff enhanced the removal of DOP in soil and alleviated the toxicity of DOP on soil microorganisms. Furthermore, its influence on soil bacterial community is not obvious. These results suggested that Lff was effective in remediating DOP contamination in different environments.

Bioremoval and Detoxification of Anthracene by a Halophilic Laccase from Alkalibacillus salilacus

BACKGROUND

Polycyclic Aromatic Hydrocarbons (PAHs) as resistant compounds in the environment has received much attention in recent years due to their adverse effects on ecological health. Among the various methods studying the removal of PAHs, enzyme biotechnology is one of the most effective and appropriate method.

OBJECTIVES

In the present study, a halophilic laccase was used for bioremoval of anthracene in the presence of 1-Hydroxybenzotriazole (HBT).

MATERIALS AND METHODS

Halophilic laccase from Alkalibacillus salilacus was tested for anthracene degradation. Residual concentration of anthracene at various concentrations of NaCl (0‒4 M), incubation time, pH, solvent, and surfactants in the enzymatic reaction mixtures was determined by HPLC.

RESULTS

The maximum removal of substrate was achieved after 72 h at 40 °C, pH 8, and NaCl concentration 1.5 M. Besides, the addition of 1% (v/v) ionic and non-ionic surfactants and 25% (v/v) of various organic solvents increased removal efficiency. The kinetic parameters K_m and V_max of the laccase for removing of anthracene were 0.114 μM and 0.546 μmoL. h.^-1 mg^-1, respectively.

CONCLUSIONS

Laccase showed the maximum removal efficiency of anthracene in the presence of 1-Hydroxybenzotriazole (HBT).

Graphene oxide functionalized with cobalt ferrites applied to the removal of bisphenol A: ionic study, reuse capacity and desorption kinetics

A new adsorbent material based on graphene oxide (GO) functionalized with magnetic cobalt ferrite nanoparticles (γCoFe₂O₄) was synthesized via ultrasonication to remove the endocrine-disrupting-chemical bisphenol A (BPA) from aqueous solutions. The synthesized material (GO-γCoFe₂O₄) was characterized by TEM, SEM, DRX and FTIR analysis. Magnetization measures proved that the adsorbent had superparamagnetic characteristics that facilitated its separation from the aqueous solution. The maximum adsorption capacity obtained was 30 mg g^-1 with adsorbent concentration of 1 g L^-1, temperature of 55°C and natural pH of the solution. The experimental data were better adjusted to the kinetic models of pseudo-second-order and Langmuir isotherm. The thermodynamic parameters showed that the BPA adsorption on GO-γCoFe₂O₄ was spontaneous, exothermic and thermodynamically favourable. Desorption kinetics was performed using 50% ethanol as solvent, resulting in an equilibrium time of 4 h with better adjustment to the pseudo-second order kinetic model. The adsorbent showed a high regeneration capacity maintaining adsorptive capacity above 75% after 6 cycles of reuse.

Immobilized enzymes and cell systems: an approach to the removal of phenol and the challenges to incorporate nanoparticle-based technology

The presence of phenol in wastewater poses a risk to ecosystems and human health. The traditional processes to remove phenol from wastewater, although effective, have several drawbacks. The best alternative is the application of ecological biotechnology tools since they involve biological systems (enzymes and microorganisms) with moderate economic and environmental impact. However, these systems have a high sensitivity to environmental factors and high substrate concentrations that reduce their effectiveness in phenol removal. This can be overcome by immobilization-based technology to increase the performance of enzymes and bacteria. A key component to ensure successful immobilization is the material (polymeric matrices) used as support for the biological system. In addition, by incorporating magnetic nanoparticles into conventional immobilized systems, a low-cost process is achieved but, most importantly, the magnetically immobilized system can be recovered, recycled, and reused. In this review, we study the existing alternatives for treating wastewater with phenol, from physical and chemical to biological techniques. The latter focus on the immobilization of enzymes and microorganisms. The characteristics of the support materials that ensure the viability of the immobilization are compared. In addition, the challenges and opportunities that arise from incorporating magnetic nanoparticles in immobilized systems are addressed.

Insights into the biosynthesis pathway of phenolic compounds in microalgae

•

Microalgal PCs are important bioactive molecules beneficial for human health.

•

Bioinformatic comparative exploration predicts PCs synthesis in microalgae.

•

Ten groups of prokaryotic and eukaryotic microalgae reveal a conserved pathway core.

•

Featured PCs can be restricted to diverse microalgae due to ecological implications.

Among the most relevant bioactive molecules family, phenolic compounds (PCs) are well known in higher plants, while their knowledge in microalgae is still scarce. Microalgae represent a novel and promising source of human health benefit compounds to be involved, for instance, in nutraceutical composition. This study aims to investigate the PCs biosynthetic pathway in the microalgal realm, exploring its potential variability over the microalgal biodiversity axis. A multistep in silico analysis was carried out using a selection of core enzymes from the pathway described in land plants. This study explores their presence in ten groups of prokaryotic and eukaryotic microalgae.. Analyses were carried out taking into account a wide selection of algal protein homologs, functional annotation of conserved domains and motifs, and maximum-likelihood tree construction. Results showed that a conserved core of the pathway for PCs biosynthesis is shared horizontally in all microalgae. Conversely, the ability to synthesize some subclasses of phenolics may be restricted to only some microalgal groups (i.e., Chlorophyta) depending on featured enzymes, such as the flavanone naringenin and other related chalcone isomerase dependent compounds.

Effect of acid treated HY zeolites in adsorption of mesosulfuron-methyl

PURPOSE

Pollution of surface water and groundwater by bulky molecules such as pesticides has been recognized as a major problem in many countries due to their persistence in aquatic environment and potential adverse health effects. The main purpose of this study is the development of a capable adsorbent to remove these bulky molecules from wastewater such as the pesticide Mesosulfuron-Methyl (MM) by reducing the diffusion path, to overcome the problems of diffusional limitations on microporous adsorbents.

METHODS

The adsorption of mesosulfuron-methyl (MM) from aqueous solution is curried out using treated acid HY zeolite. Batch sorption equilibrium and kinetic experiments are conducted to evaluate the efficiency of these materials. Parent zeolites and their derivatives have been characterized by nitrogen adsorption-desorption, pyridine chemisorption followed by infrared spectroscopy and X-ray fluorescence.

RESULTS

The acid treatment leads to an increase in the specific surface from 691 to 853 m2 g- 1 for HY(30) and from 631 to 806 m2 g- 1 for the HY(16.6) zeolites. It also leads to a reduction in Lewis acidity from 74 to 25 µmol g- 1 and from 135 to 31 µmol g- 1 for HY(30) and HY(16.6) zeolites respectively, and increases the adsorbent-adsorbate interaction. The adsorption capacity increased from 83 to 99 % after acid treatment. The equilibrium adsorption time is decreased from 15 h to 10 min for the HY(30)_A and from 20 h to 20 min for the HY(16.6)_A for an initial concentration of 20 mg L- 1. The adsorption capacity depends on the pH solution, and the neutral form of the MM is more easily adsorbed into zeolite than the dissociated form via the framework bridged oxygen atoms. For all the samples, the pseudo-second-order kinetic model fits very well with the experimental data. In the case of the modified zeolites, the approaching equilibrium factor R w decreases from 0.08183 to 0.00008 when the Lewis acid sites decrease; indicating that the equilibrium is reached more quickly. S-shape adsorption isotherms indicates that cooperative adsorption phenomena. Nevertheless, the shape of acid treated zeolites evolves to an L type indicating a significant enhancement of the adsorbent - adsorbate interactions inducing better adsorption efficiency.

CONCLUSIONS

Mesosulfuron-methyl adsorption has been successfully enhanced after acid treatments of zeolites HY.

Challenges and Recent Advances in Enzyme-Mediated Wastewater Remediation-A Review

Different classes of artificial pollutants, collectively called emerging pollutants, are detected in various water bodies, including lakes, rivers, and seas. Multiple studies have shown the devastating effects these emerging pollutants can have on human and aquatic life. The main reason for these emerging pollutants in the aquatic environment is their incomplete removal in the existing wastewater treatment plants (WWTPs). Several additional treatments that could potentially supplement existing WWTPs to eliminate these pollutants include a range of physicochemical and biological methods. The use of enzymes, specifically, oxidoreductases, are increasingly being studied for their ability to degrade different classes of organic compounds. These enzymes have been immobilized on different supports to promote their adoption as a cost-effective and recyclable remediation approach. Unfortunately, some of these techniques have shown a negative effect on the enzyme, including denaturation and loss of catalytic activity. This review focuses on the major challenges facing researchers working on the immobilization of peroxidases and the recent progress that has been made in this area. It focuses on four major areas: (1) stability of enzymes upon immobilization, enzyme engineering, and evolution; (2) recyclability and reusability, including immobilization on membranes and solid supports; (3) cost associated with enzyme-based remediation; and (4) scaling-up and bioreactors.

Heterologous expression of bacterial CotA-laccase, characterization and its application for biodegradation of malachite green

Malachite green (MG) is used as fungicide/parasiticide in aquaculture, its persistence is detrimental as it exhibits carcinogenic effects to aquatic organisms. Bacterial laccase evaluated as the best enzyme at extreme condition for aquatic MG removal. Study aims to increase laccase concentration, CotA-laccase from Bacillus subtilis was cloned and overexpressed in Escherichia coli. Optimal catalysis for purified CotA-laccase were at pH 5.0, 60 °C, and 1 mM of (2,2-azino-di-[3-ethylbenzothiazoline-sulphonate-(6)]) with Km and Kcat 0.087 mM and 37.64 S^-1 respectively. MG biodegradation by CotA-laccase in clam and tilapia pond wastewaters and cytotoxic effect of biodegraded products in grouper fin-1 cells were determined. MG degradation by CotA-laccase was equally efficient, exhibiting upto 90-94% decolorization at freshwater and saline conditions and treated solution was non-toxic to GF-1 cells. Thus, recombinant-CotA-laccase could be an environmentally-friendly enzyme for aquaculture to remove MG, thereby effective to reduce its accumulation in aquatic organisms and ensuring safe aquaculture products.

Marine sediment derived bacteria Enterobacter asburiae ES1 and Enterobacter sp. Kamsi produce laccase with high dephenolisation potentials

Purified laccases from bacterial species isolated from marine sediment were applied to degrade Bisphenol A (BPA). The Bacterial species were isolated from marine water sediments sampled from Cove Rock and Bonza Bay beach of the Eastern Cape Province, South Africa was tested for laccase activity on varied phenolic plates. The two most promising strains, Enterobacter asburiae ES1 and Enterobacter sp. Kamsi was subjected to extracellular laccase production and were identified using molecular methods. Both extracted bacterial laccases showed an affinity for ABTS and PFC substrates and were purified to homogeneity by ammonium sulfate precipitation, anion exchange, and size exclusion chromatography. A specific laccase activity of 231.67 and 218.15 U/mg of protein and a molecular weight of 50 and 55 kDa was obtained from the purified ES1 and Kamsi laccases. Laccase activity was optimum at pH8 and 5 and at 80 °C and 60 °C for ES1 and Kamsi laccases, and they manifested 71.7% and 65.8% BPA decolorizing effects. The optimized treatment condition applied showed maximum BPA removal effects of 85% and 86% at pH7 and 6, while 78% and 79% was degraded at 70 °C and 80 °C while at 250 µL enzyme volume, BPA was actively degraded to 85%, and 75% removal effect showed by ES1 and Kamsi laccases. The molecular identification of the pure colonies using 16S rRNA showed the isolate belonged to the class of gammaproteobacterial. Their nucleotide sequence has been deposited in NCBI with the accession number MN686602 and MN686603. Conclusively, marine habitat serves as a reservoir for active bacterial laccase producers suitable for bioprocess application.

Novel Thermophilic Bacterial Laccase for the Degradation of Aromatic Organic Pollutants

We identified a putative laccase from the thermophilic bacterium Geobacillus yumthangensis. The putative laccase was produced recombinantly and its ability to catalyse the degradation of aromatic organic pollutants was investigated. The putative laccase exhibits broad pH and temperature stability, and, notably, it could catalyse the degradation of organic dyes as well as toxic pollutants including bisphenol A, guaiacol and phenol with a redox mediator. Our work further demonstrates the potential of using oxidative enzymes to break down toxic chemicals that possess major threats to human health and the environment.

A heat-resistant intracellular laccase immobilized via cross-linked enzyme aggregate preparation: Characterization, application in bisphenol A removal and phytotoxicity evaluation

Aureobasidium pullulans laccase was immobilized via cross-linked enzyme aggregate (CLEA) and deployed in bisphenol-A (BPA) removal. The immobilization and BPA removal processes were mathematically modeled. The CLEA-treated BPA was evaluated for phytotoxicity. The optimum conditions for CLEA resulting in the highest immobilization yield were ammonium sulfate (60% w/v), glutaraldehyde (30 mM), pH (4.5), time (6 h) and temperature (45 °C). The CLEA retained about 56% of its activity after twelve catalytic cycles. The optimum pH and temperature of the laccase CLEA were 5.5 and 60 °C respectively. The SEM indicated that the laccase CLEA was type II (unstructured). The data obtained from the heat inactivation kinetics and thermodynamic characterization indicated that the CLEA was stable to heat denaturation than the free enzyme. The kinetic parameters obtained for the CLEA with ABTS as substrate were 101.3 µM, 2.94 µmols^-1 mg^-1 and 0.03 dm³ s^-1 mg^-1 for the Km, Kcat and Kcat/Km respectively. The optimum conditions for BPA removal using the CLEA were temperature (30 °C), time (2 h), CLEA (1.0 mg) and BPA concentration (40 mg/L). After the 7th cycle, BPA removal by the laccase CLEA was 63 ± 2.3%. From the germination index values obtained, the CLEA-treated BPA solution showed no phytotoxicity to germinated S. bicolor seeds compared to the untreated (BPA-only) solutions.

Applications of Biocatalysts for Sustainable Oxidation of Phenolic Pollutants: A Review

Phenol and its derivatives are hazardous, teratogenic and mutagenic, and have gained significant attention in recent years due to their high toxicity even at low concentrations. Phenolic compounds appear in petroleum refinery wastewater from several sources, such as the neutralized spent caustic waste streams, the tank water drain, the desalter effluent and the production unit. Therefore, effective treatments of such wastewaters are crucial. Conventional techniques used to treat these wastewaters pose several drawbacks, such as incomplete or low efficient removal of phenols. Recently, biocatalysts have attracted much attention for the sustainable and effective removal of toxic chemicals like phenols from wastewaters. The advantages of biocatalytic processes over the conventional treatment methods are their ability to operate over a wide range of operating conditions, low consumption of oxidants, simpler process control, and no delays or shock loading effects associated with the start-up/shutdown of the plant. Among different biocatalysts, oxidoreductases (i.e., tyrosinase, laccase and horseradish peroxidase) are known as green catalysts with massive potentialities to sustainably tackle phenolic contaminants of high concerns. Such enzymes mainly catalyze the o-hydroxylation of a broad spectrum of environmentally related contaminants into their corresponding o-diphenols. This review covers the latest advancement regarding the exploitation of these enzymes for sustainable oxidation of phenolic compounds in wastewater, and suggests a way forward.

Decaffeination of wastewater using activated carbon produced from velvet tamarind-pericarp (Dialium Guineense)

Adsorption of caffeine from an aqueous solution was carried out using Velvet Tamarind-Pericarp, activated with H₃PO₄. The adsorbent was characterized using a scanning-electron microscope and the Brunauer-Emmett-Teller. Parameters such as activating agent concentration (80 wt.% in 100 mL solution), initial caffeine concentration of 5-40 g/L, pH of 0-14, and residence time 0-90 minutes, were investigated. Improved adsorptive capacities were seen at increased acid concentrations, with the highest removal rate obtained at a pH of 6. The highest residence time and adsorbent concentrations were obtained at 40 min and 10 g/L. The surface adsorption of the adsorbent obeyed the Langmuir Isotherm, while the regression coefficients conformed to the pseudo-second-order kinetic model for the remediation of caffeine with DG-AC. The highest amount of caffeine removed per gram DG is 72.60 mg.g^-1. From the thermodynamic study, the caffeine adsorption was feasible, spontaneous, entropy-driven, and endothermic. These data show that the use of DG-AC can be a good alternative to other expensive methods for caffeine remediation. The Pseudo - first/second-order kinetic results gave R² values of 0.95 and 0.99, other parameters such as entropy (ΔS°) and enthalpy (ΔH°) are 0.06 (kJmolK) and (19.21) (kJmolK).

The genus Paraconiothyrium: species concepts, biological functions, and secondary metabolites

The genus Paraconiothyrium has worldwide distribution with diverse host habitats and exhibits potential utilisation as biocontrol agent, bioreactor and antibiotic producer. In this review, we firstly comprehensively summarise the current taxonomic status of Paraconiothyrium species, including their category names, morphological features, habitats, and multigene phylogenetic relationships. Some Paraconiothyrium species possess vital biological functions and potential applications in medicine, agriculture, industry, and environmental protection. A total of 147 secondary metabolites have been reported so far from Paraconiothyrium, among which 95 are novel. This paper serves to provide an overview of their diverse structures with chemical classification and biological activities. To date, 27 species of Paraconiothyrium have been documented; however, only seven have been investigated for their secondary metabolites or biological functions. Our review is expected to draw more attention to this genus for providing a taxonomic reference, discovering extensive biological functions, and searching in-depth for new bioactive natural products.

A Brief History of Colour, the Environmental Impact of Synthetic Dyes and Removal by Using Laccases

The history of colour is fascinating from a social and artistic viewpoint because it shows the way; use; and importance acquired. The use of colours date back to the Stone Age (the first news of cave paintings); colour has contributed to the social and symbolic development of civilizations. Colour has been associated with hierarchy; power and leadership in some of them. The advent of synthetic dyes has revolutionized the colour industry; and due to their low cost; their use has spread to different industrial sectors. Although the percentage of coloured wastewater discharged by the textile; food; pharmaceutical; cosmetic; and paper industries; among other productive areas; are unknown; the toxic effect and ecological implications of this discharged into water bodies are harmful. This review briefly shows the social and artistic history surrounding the discovery and use of natural and synthetic dyes. We summarise the environmental impact caused by the discharge of untreated or poorly treated coloured wastewater to water bodies; which has led to physical; chemical and biological treatments to reduce the colour units so as important physicochemical parameters. We also focus on laccase utility (EC 1.10.3.2), for discolouration enzymatic treatment of coloured wastewater, before its discharge into water bodies. Laccases (p-diphenol: oxidoreductase dioxide) are multicopper oxidoreductase enzymes widely distributed in plants, insects, bacteria, and fungi. Fungal laccases have employed for wastewater colour removal due to their high redox potential. This review includes an analysis of the stability of laccases, the factors that influence production at high scales to achieve discolouration of high volumes of contaminated wastewater, the biotechnological impact of laccases, and the degradation routes that some dyes may follow when using the laccase for colour removal.

Laccase and horseradish peroxidase for green treatment of phenolic micropollutants in real drinking water and wastewater

Biologically active micropollutants that contain diverse phenolic/aromatic structures are regularly present in wastewater effluents and are even found in drinking water. Advanced green technologies utilizing immobilized laccase and/or peroxidase, which target these micropollutants directly, may provide a reasonable alternative to standard treatments. Nevertheless, the use of these enzymes is associated with several issues that may prevent their application, such as the low activity of laccase at neutral and basic pH or the necessity of hydrogen peroxide addition as a co-substrate for peroxidases. In this study, the activity of laccase from Trametes versicolor and horseradish peroxidase was evaluated across a range of commonly used substrates (2,2'-azino-bis(3-ethylbenzothiazoline-6-sulphonic acid) (ABTS), syringaldazine, and guaiacol). Moreover, conditions for their optimal performance were explored along with an assessment of whether these conditions accurately reflect the effectivity of both enzymes in the degradation of a mixture of bisphenol A, 17α-ethinylestradiol, triclosan, and diclofenac in tap drinking water and secondary wastewater effluent. Laccase and horseradish peroxidase showed optimal activity at strongly acidic pH if ABTS was used as a substrate. Correspondingly, the activities of both enzymes detected using ABTS in real waters were significantly enhanced by adding approximately 2.5% (v/v) of McIlvaine's buffer. Degradation of a mixture of micropollutants in wastewater with 2.5% McIlvaine's buffer (pH 7) resulted in a substantial decrease in estrogenic activity. Low degradation efficiency of micropollutants by laccase was observed in pure McIlvaine's buffer of pH 3 and 7, compared with efficient degradation in tap water of pH 7.5 without buffer. This study clearly shows that enzyme activity needs to be evaluated on micropollutants in real waters as the assessment of optimal conditions based on commonly used substrates in pure buffer or deionized water can be misleading.

Production of Pleurotus sajor-caju crude enzyme broth and its applicability for the removal of bisphenol A

Bisphenol A is an endocrine interfering compound, produced and used on a large scale worldwide. Chemical and biologic methods can be used to remove it from the environment. Biological methods are considered less costly, safer and, according to green chemistry definitions, an environmentally correct method. Considering the use of a crude enzyme broth, without any downstream process, the costs could be mostly reduced. Thus, the removal of bisphenol A by Pleurotus sajor-caju crude enzyme broth was investigated. Initially, the agro-industrial wastes were characterized and, the composition of the culture medium and the bioreactor culture conditions were defined. The enzyme produced in the highest concentration was characterized and the crude broth used in the bisphenol A removal assays. The OXI45 culture medium presented the highest laccase activity (1,850.7 U L-1, 350 rpm). Greater laccase stability was observed at 20 - 40 oC and pHs 5 - 7. Vanillin and ferulic acid (considered mediator compounds) were identified in the crude broth, probably helping on the obtention of the high value of removal effectiveness (0.052 mg U-1 h-1). The results indicate the potential use of the Pleurotus sajor-caju crude enzyme broth to obtain an enzymatic formulation for application in the environmental area.

Integrated approach on azo dyes degradation using laccase enzyme and Cul nanoparticle

Azo dyes released by the textile industries cause severe damage to the environment and living organisms. The degradation of azo dyes is widely studied using enzymatic methods. Laccase is a copper-containing enzyme that degrades the azo dyes into less toxic compounds. In this work, the crude laccase enzyme produced by the alkaliphile Pseudomonas mendocina in the degradation of mixed azo dye showed 0.386 U/mL activity at pH 8.5. A combination of enzymatic and green synthesized nanoparticles was used in the degradation of mixed azo dye. Laccase used in the degradation of mixed azo dyes showed 58.4% in 72 h, while the photocatalytic degradation of mixed azo dyes showed 15.9%. The degradation of azo dyes using copper iodide nanoparticles resulted in 15.8% degradation. However, it was noticed that the combined method of degradation of azo dyes involving both crude laccase and CuI nanoparticles gave a degradation of 62.3% in 60 min. Interaction of laccase enzyme with azo dyes using in silico analysis predicted the binding energy with reactive red (−7.19 kcal/mol), reactive brown (−8.57 kcal/mol), and reactive black dyes (−9.17 kcal/mol) respectively.

Insights into phenolic compounds from microalgae: structural variety and complex beneficial activities from health to nutraceutics

Phenolic compounds (PCs) are a family of secondary metabolites with recognized biological activities making them attractive for the biomedical "red" biotechnology. The development of the eco-sustainable production of natural bioactive metabolites requires using easy cultivable organisms, such as microalgae, which represents one of the most promising sources for biotechnological applications. Microalgae are photosynthetic organisms inhabiting aquatic systems, displaying high levels of biological and functional diversities, and are well-known producers of fatty acids and carotenoids. They are also rich in other families of bioactive molecules e.g. phenolic compounds. Microalgal PCs however are less investigated than other molecular components. This study aims to provide a state-of-art picture of the actual knowledge on microalgal phenolic compounds, reviewing information on the PC content variety and chemodiversity in microalgae, their environmental modulation, and we aim to report discuss data on PC biosynthetic pathways. We report the challenges of promoting microalgae as a relevant source of natural PCs, further enhancing the interests of microalgal "biofactories" for biotechnological applications (i.e. nutraceutical, pharmacological, or cosmeceutical products).

Improving laccase thermostability with aqueous natural deep eutectic solvents

The wide-spread use of laccases in industry is often limited due to the enzyme inactivation over time at conditions which exceeds the operating conditions of the enzymes, which are neutral pH and ambient temperatures (30-40 °C). Natural Deep Eutectic Solvents (NADESs) have attracted considerable attention as reaction media in biocatalysis due to their promising compatibility with enzymes and sustainable derivation. In this contribution we demonstrate the possibility of applying aqueous NADESs as incubation media to alter the activity and inhibit thermal inactivation of laccase T. versicolor. For example we show that by incubating 0.25 g L^-1 laccase in an aqueous 25 wt% betaine-xylitol based NADES at 70 °C for 15 min, the measured residual activity of laccase is a near 10 fold greater than the measured residual activity of laccase when incubated without the NADES. Moreover, the comparison of the residual activities of the enzyme in presence betaine, xylitol or NADES is clearly showing the advantage of using a NADES over its individual components. The drastic enhancement of the enzyme thermostability by pre-incubation of laccase in NADES media showcases a facile, cheap and green method of boosting the stability laccase.

Advances in Electrochemical Impedance Spectroscopy Detection of Endocrine Disruptors

Endocrine disruptors (EDs) are contaminants that may mimic or interfere with the body's hormones, hampering the normal functions of the endocrine system in humans and animals. These substances, either natural or man-made, are involved in development, breeding, and immunity, causing a wide range of diseases and disorders. The traditional detection methods such as enzyme linked immunosorbent assay (ELISA) and chromatography are still the golden techniques for EDs detection due to their high sensitivity, robustness, and accuracy. Nevertheless, they have the disadvantage of being expensive and time-consuming, requiring bulky equipment or skilled personnel. On the other hand, early stage detection of EDs on-the-field requires portable devices fulfilling the Affordable, Sensitive, Specific, User-friendly, Rapid and Robust, Equipment free, Deliverable to end users (ASSURED) norms. Electrochemical impedance spectroscopy (EIS)-based sensors can be easily implemented in fully automated, sample-to-answer devices by integrating electrodes in microfluidic chips. The latest achievements on EIS-based sensors are discussed and critically assessed.

Insight into multicopper oxidase laccase from Myrothecium verrucaria ITCC-8447: a case study using in silico and experimental analysis

The oxidation activity of multicopper-oxidases overlaps with different substrates of laccases and bilirubin oxidases, thus in the present study an integrated approach of bioinformatics using homology modeling, docking, and experimental validation was used to confirm the type of multicopper-oxidase in Myrothecium verrucaria ITCC-8447. The result of peptide sequence of M. verrucaria ITCC-8447 enabled to predict the 3 D-structure of multicopper-oxidase. It was overlapped with the structure of laccase and root mean square deviation (RMSD) was 1.53 Å for 533 and, 171 residues. The low binding energy with azino-bis (3-ethylbenzothiazoline-6-sulfonic acid) (ABTS) (-5.64) as compared to bilirubin (-4.39) suggested that M. verrucaria ITCC-8447 have laccase-like activity. The experimental analysis confirmed high activity with laccase specific substrates, phenol (18.3 U/L), ampyrone (172.4 U/L) and, ampyrone phenol coupling (50 U/L) as compared to bilirubin oxidase substrate bilirubin (16.6 U/L). In addition, lowest binding energy with ABTS (-5.64), syringaldazine SYZ (-4.83), guaiacol GCL (-4.42), and 2,6-dimethoxyphenol DMP (-4.41) confirmed the presence of laccase. Further, complete remediation of two hazardous model pollutants i.e., phenol and resorcinol (1.5 mM) after 12 h of incubation and low binding energy of -4.32 and, -4.85 respectively confirmed its removal by laccase. The results confirmed the presence of laccase in M. verrucaria ITCC-8447 and its effective bioremediation potential.

Investigation of reactive Blue 19 biodegradation and byproducts toxicity assessment using crude laccase extract from Trametes versicolor

Crude laccase potency on biodegradation and detoxification of Reactive blue 19 (RB-19) were demonstrated, along with prediction of degradation mechanisms, pathways and byproducts analysis. Trametes versicolor, cultured on pampas grass inflorescence (Cortaderia selloana), yielded the best crude laccase activity (15.36 U/g). 10 U CLE activities demonstrated a biodegradation yield (85%) in 210 min, at pH 4, 50 °C and 200 mg/L RB-19 concentrations. Evolution of a brown color that absorbed maximally at 478 nm was observed during biodegradation. Two methods were adopted for byproducts extraction, three methods for toxicity analysis and four models for kinetic parameters (K_m and V_max) determination. 2-ethylanthracene, 2-hydroxycyclohexa-2,4-dien-1-one, 2(4-methylphenyl)-ethan-1-amine, 1-[6-hydroperoxy-4,5-bis(sulfooxy)oxan-3-yl]triaza-1,2-dien-2-ium, naphthalene-2,7-disulfonic acid and N-[(5-oxooxolan-2-yl)methyl]acetamide were detected as toxic byproducts. Brown color evolution was due to 1,1,1-triethyl-3-(methoxycarbonyl)-2,2-dioxo-2λ6-diazathian-1-ium (methoxycarbonyl sulfanyl-triethylammonium hydroxide) inner salt. Increase in color density (light to dark brown) was a function of byproduct(s) biodegradation and polymerization. RB-19 and byproduct acute toxicities were decreased significantly (98% - 6.91%). Kinetic parameters K_m (18.05 mg/L) and V_max (0.31 mg/L. min^-1) from the four kinetic models demonstrated higher affinity of CLE to RB-19. CLE yielded a catalytic activity (V_max/K_m =0.017 min^-1) demonstrating the flexibility of CLE active site to RB-19 binding over commercial laccase.

DNA-directed arrangement of soft synthetic compartments and their behavior in vitro and in vivo

DNA has been widely used as a key tether to promote self-organization of super-assemblies with emergent properties. However, control of this process is still challenging for compartment assemblies and to date the resulting assemblies have unstable membranes precluding in vitro and in vivo testing. Here we present our approach to overcome these limitations, by manipulating molecular factors such as compartment membrane composition and DNA surface density, thereby controlling the size and stability of the resulting DNA-linked compartment clusters. The soft, flexible character of the polymer membrane and low number of ssDNA remaining exposed after cluster formation determine the interaction of these clusters with the cell surface. These clusters exhibit in vivo stability and lack of toxicity in a zebrafish model. To display the breadth of therapeutic applications attainable with our system, we encapsulated the medically established enzyme laccase within the inner compartment and demonstrated its activity within the clustered compartments. Most importantly, these clusters can interact selectively with different cell lines, opening a new strategy to modify and expand cellular functions by attaching such pre-organized soft DNA-mediated compartment clusters on cell surfaces for cell engineering or therapeutic applications.

Biodegradation and detoxification of bisphenol A by bacteria isolated from desert soils

The endocrine-disrupting chemical bisphenol A (BPA) has attracted much attention because of its estrogenic activity and widespread environmental contamination. In this study, we investigated the BPA biodegradation abilities of various bacterial strains isolated from deserts and arid soils from southern Tunisia. Ten bacterial strains that belong to Pseudomonas putida, Pseudomonas aeruginosa, Enterobacter cloacae, Klebsiella sp. and Pantoea sp. showed high BPA removal potential in mineral salt medium (MSM) containing 1 mM BPA. BPA removal rates varied between strains and ranged from 36 to 97%. The strain G320 (P. putida) presented the highest BPA removal rate with 97% within 4 days at 30 °C. The half-life when increasing the BPA concentration to 3 mM was 2 days for strain G320, while total degradation was achieved within 8 days. BPA biodegradation products were identified by GC-MS, and their toxicity was assessed by an algal toxicity test. BPA detoxification was confirmed by evaluating the effect of its biodegradation metabolites on algal growth (dry weight), cells morphology and chlorophylls levels of Tetraselmis sp. strain V2. Results showed the interesting potential of desert soil's bacteria in BPA detoxification as well as the eventual use of the algal specie in toxicity assessment.

Aptitude of Oxidative Enzymes for Treatment of Wastewater Pollutants: A Laccase Perspective

Natural water sources are very often contaminated by municipal wastewater discharges which contain either of xenobiotic pollutants and their sometimes more toxic degradation products, or both, which frustrates the universal millenium development goal of provision of the relatively scarce pristine freshwater to water-scarce and -stressed communities, in order to augment their socioeconomic well-being. Seeing that both regulatory measures, as regards the discharge limits of wastewater, and the query for efficient treatment methods remain unanswered, partially, the prospects of enzymatic treatment of wastewater is advisable. Therefore, a reconsideration was assigned to the possible capacity of oxidative enzymes and the respective challenges encountered during their applications in wastewater treatment, and ultimately, the prospects of laccase, a polyphenol oxidase that oxidizes aromatic and inorganic substrates with electron-donating groups in treatment aromatic contaminants of wastewater, in real wastewater situations, since it is assumed to be a vehicle for a greener community. Furthermore, the importance of laccase-driven catalysis toward maintaining mass-energy balance, hence minimizing environmental waste, was comprehensibly elucidated, as well the strategic positioning of laccase in a model wastewater treatment facility for effective treatment of wastewater contaminants.