Deposition efficiency of inhaled particles (15-5000 nm) related to breathing pattern and lung function: an experimental study in healthy children and adults

Characterizing the Transient Emission of Particles and Gases from a Single Puff of Electronic Cigarette Smoke

This study employed high-time-resolution systems to examine the transient properties of aerosols and gases emitted from electronic cigarette (EC) puffs. Using a fast aerosol sizer, we measured particle size distributions (PSDs) across various EC brands (JUUL, VUSE, VOOPOO), revealing sizes ranging from 5 to 1000 nm at concentrations of 107 to 1010 cm-3. Most aerosols were found to be in the ultrafine range (below 100 nm), with JUUL-, VUSE-, and VOOPOO-producing aerosols with geometric mean sizes of 19.9, 47.3, and 29.4 nm, respectively. Applying the International Commission on Radiological Protection (ICRP) deposition model and assuming no further evolution of aerosols in the respiratory system, we estimated particle deposition in different respiratory regions: 45-60% in the alveolar region, 10-25% in the tracheobronchial region, and 20-35% in the extrathoracic region. The highest single-puff deposition was observed with the VOOPOO device at 60 W, depositing 180.1 ± 7.6 μg in the alveolar region. The gas emissions (CO2, NOx, CO, and total hydrocarbons) were measured at different power settings of the VOOPOO EC. Single-puff NOx and CO levels exceeded the permissible exposure limits of the Occupational Safety and Health Administration, indicating potential acute exposure risks. Higher power settings were correlated with increased gas mixing ratios, suggesting more e-liquid vaporization and possible chemical transformations at higher temperatures. These findings demonstrated significant health risks associated with ultrafine particles from high-power ECs and emphasize the need for advanced measurements to accurately assess their physicochemical properties and potential health implications.

Migration and deposition characteristics of micro-dust in the human upper airway in dust-polluted tunnel environments

Dust pollution in coal mine tunneling environment can cause serious hazards. This study presents a numerical analysis of the migration, deposition and escape characteristics of micro-dust in the human upper airway (HUA) under different labor intensities. The maximum deviation between simulation and experimental results was 8.97 %. The findings reveal that the expiratory flow was affected by the secondary motion, and two secondary vortices were formed around the posterior pharyngeal wall, which was prone to dust deposition. As the expiratory intensity increased, a large amount of 1-15 μm small-sized dust was deposited in the pharynx, and the deposition fraction (DFd) of 15 μm dust increased the most, reaching 77.13 %; 20-80 μm large-sized dust was difficult to exhale, and most were deposited near the nasal turbinate and nasopharynx. With the increase of density, the escape rate (ERd) of 1-15 μm dust showed a decreasing trend. The deposition of large-sized dust over 20 μm in nasopharyngeal region was more affected by density changes, but this fluctuation was reduced with increasing particle size. The study will help assess the human health risks of dust environment, develop more effective dust monitoring and control technologies and strategies for a cleaner, safer working air environment.

Inhalation exposure to nanosized aerosols of disinfectants for the application of continuous releasing sprayers and fogger

This study aimed to investigate the airborne exposure to aerosols according to the particle size distribution of three different spray types (nano-nozzled spray gun, low-temperature steam spray, and fogger) and compare the concentrations of inhaled aerosols between children and adults. Airborne aerosols released from three products were observed using size-segregated particle measurements, and particle concentrations deposited in the respiratory tracts of adults and children were estimated using multi-path particle dosimetry lung deposition models. All types of sprayers generated the most nanoparticles (~100 nm). Due to their higher respiratory rate than adults, a larger number of particles <1.0 μm deposited in the children's respiratory tracts was higher. The sequences of the total number of particles in the respiratory regions after spraying nano-nozzled spray gun and fogger were alveolar (AL)>tracheobronchial (TB)>head airway (HA) in adults and AL>HA>TB in children. Meanwhile, the trend of low-temperature steam spray was AL>TB>HA in adults and AL>TB>HA in children.

Characterizing sector-oriented roadside exposure to ultrafine particles (PM0.1) via machine learning models: Implications of covariates influences on sectors variability

Ultrafine particles (UFPs; PM0.1) possess intensified health risk due to their smaller size and unique spatial variability. One of major emission sources for UFPs is vehicle exhaust, which varies based on the traffic composition in each type of roadside sector. The current challenge of epidemiological UFPs study is limited characterization ability due to expensive instruments. This study assessed the UFPs particle number concentrations (UFPs PNC) exposure dose for typical healthy adults and children at three different roadside sectors, including industrial roadside (IN), residential roadside (RS), and urban background (UB). Furthermore, this study also developed and utilized machine learning (ML) algorithms that could accurately characterize the UFPs exposure dose and explain the covariates effects on the model outputs, representing the intra-urban variability of UFPs between sectors. It was found that the average inhaled UFPs dose for healthy adults and children during off-peak season (warm period) were 1.71 ± 0.19 × 1010; 1.28 ± 0.22 × 1010; 1.09 ± 0.18 × 1010 #/hour and 1.33 ± 0.15 × 1010; 0.99 ± 0.17 × 1010; 0.86 ± 0.14 × 1010 #/hour at IN, RS, UB. Inhaled UFPs were mainly deposited in tracheobronchial (TB) respiratory fraction for adults (67.7%) and in alveoli (ALV) fraction for children (67.5%). Among three ML algorithms implemented in this study, XGBoost possessed the highest UFPs PNC exposure dose estimation performances with R2 = 0.965; 0.959; 0.929 & RMSE = 0.79 × 108; 0.54 × 108; 0.15 × 105 #/hour at IN, RS, and UB which then followed by multiple linear regression (MLR), and random forest (RF). Furthermore, SHAP analysis from the XGBoost model has successfully pointed out the spatial variability of each roadside sector by quantifying the approximated contributions of covariates to the model's output. Findings in this study highlighted the potential use of ML models as an alternative for preliminary particle exposure source apportionment.

A model study on the effect of human's height variability in particle deposition and retained dose in the respiratory tract

The objective of the current study was to investigate the impact of human's height variability to the deposition percentage, the deposited and the retained dose of particulate matter in the respiratory tract. In addition, the dose to the oesophagus, blood and lymph nodes was evaluated after particle clearance. A methodology which correlates anatomical and physiological parameters with height was adopted into an existing particle dosimetry model (Exposure Dose Model 2, ExDoM2). Model results showed that deposition of particles with aerodynamic diameter (dae) ranging from 0.001 to 10 μm depends on the competition between anatomical/physiological parameters, with the maximum effect induced from height variability to be observed for particles in the size range of 0.30 μm Collapse

Key Words

• Dose
• Dosimetry models
• Height variability
• Particle deposition
• Particulate matter
• Respiratory tract

Collapse

MESH Headings

• Humans
• Particulate Matter
• Respiratory System/drug effects
• Particle Size
• Air Pollutants
• Body Height

Collapse

Grants

• 2023ΝΑ11900001 General Secretariat for Research and Technology

Collapse

Affiliation(s)

Eleftheria Chalvatzaki School of Chemical and Environmental Engineering, Technical University of Crete, 73100, Chania, Crete, Greece
Mihalis Lazaridis School of Chemical and Environmental Engineering, Technical University of Crete, 73100, Chania, Crete, Greece.

Collapse

Guidelines for assessing maternal cardiovascular physiology during pregnancy and postpartum

Maternal mortality rates are at an all-time high across the world and are set to increase in subsequent years. Cardiovascular disease is the leading cause of death during pregnancy and postpartum, especially in the United States. Therefore, understanding the physiological changes in the cardiovascular system during normal pregnancy is necessary to understand disease-related pathology. Significant systemic and cardiovascular physiological changes occur during pregnancy that are essential for supporting the maternal-fetal dyad. The physiological impact of pregnancy on the cardiovascular system has been examined in both experimental animal models and in humans. However, there is a continued need in this field of study to provide increased rigor and reproducibility. Therefore, these guidelines aim to provide information regarding best practices and recommendations to accurately and rigorously measure cardiovascular physiology during normal and cardiovascular disease-complicated pregnancies in human and animal models.

Lung function changes in children exposed to mine fire smoke in infancy

BACKGROUND AND OBJECTIVE

Chronic, low-intensity air pollution exposure has been consistently associated with reduced lung function throughout childhood. However, there is limited research regarding the implications of acute, high-intensity air pollution exposure. We aimed to determine whether there were any associations between early life exposure to such an episode and lung growth trajectories.

METHODS

We conducted a prospective cohort study of children who lived in the vicinity of the Hazelwood coalmine fire. Lung function was measured using respiratory oscillometry. Z-scores were calculated for resistance (R5 ) and reactance at 5 Hz (X5 ) and area under the reactance curve (AX). Two sets of analyses were conducted: (i) linear regression to assess the cross-sectional relationship between post-natal exposure to mine fire-related particulate matter with an aerodynamic diameter of less than 2.5 micrometres (PM2.5 ) and lung function at the 7-year follow-up and (ii) linear mixed-effects models to determine whether there was any association between exposure and changes in lung function between the 3- and 7-year follow-ups.

RESULTS

There were no associations between mine fire-related PM2.5 and any of the lung function measures, 7-years later. There were moderate improvements in X5 (β: -0.37 [-0.64, -0.10] p = 0.009) and AX (β: -0.40 [-0.72, -0.08] p = 0.014), between the 3- and 7-year follow-ups that were associated with mean PM2.5 , in the unadjusted and covariance-adjusted models. Similar trends were observed with maximum PM2.5 .

CONCLUSION

There was a moderate improvement in lung stiffness of children exposed to PM2.5 from a local coalmine fire in infancy, consistent with an early deficit in lung function at 3-years after the fire that had resolved by 7-years.

The Correlation between Metal Mixed Exposure and Lung Function in Different Ages of the Population

Herein, we explored the overall association between metal mixtures and lung functions in populations of varying ages and the relationship among the associated components. The 2007-2012 National Health and Nutrition Examination Survey data of 4382 American participants was analyzed, and generalized linear, elastic net, quantile g-computation, and Bayesian kernel machine regression models were used to evaluate the relationship between exposure to the metal mixture and lung function at various ages. The results of barium exposure at distinct stages revealed that children and adolescents exhibited greater lung function changes than those in adults and the elderly. Additionally, compared with children and adolescents, cadmium- and arsenic-containing metabolites contributed to nonconductive lung function changes in adults and the elderly exposed to metal mixtures. The results showed that the effects of exposure to metal mixtures on lung function in children and adolescents were predominantly caused by lead and barium. Altogether, children and adolescents were found to be more susceptible to metal-exposure-mediated lung function changes than adults and the elderly.

An experimental study on lung deposition of inhaled 2 μm particles in relation to lung characteristics and deposition models

BACKGROUND

The understanding of inhaled particle respiratory tract deposition is a key link to understand the health effects of particles or the efficiency for medical drug delivery via the lung. However, there are few experimental data on particle respiratory tract deposition, and the existing data deviates considerably when comparing results for particles > 1 μm.

METHODS

We designed an experimental set-up to measure deposition in the respiratory tract for particles > 1 μm, more specifically 2.3 μm, with careful consideration to minimise foreseen errors. We measured the deposition in seventeen healthy adults (21-68 years). The measurements were performed at tidal breathing, during three consecutive 5-minute periods while logging breathing patterns. Pulmonary function tests were performed, including the new airspace dimension assessment (AiDA) method measuring distal lung airspace radius (rAiDA). The lung characteristics and breathing variables were used in statistical models to investigate to what extent they can explain individual variations in measured deposited particle fraction. The measured particle deposition was compared to values predicted with whole lung models. Model calculations were made for each subject using measured variables as input (e.g., breathing pattern and functional residual capacity).

RESULTS

The measured fractional deposition for 2.3 μm particles was 0.60 ± 0.14, which is significantly higher than predicted by any of the models tested, ranging from 0.37 ± 0.08 to 0.53 ± 0.09. The multiple-path particle dosimetry (MPPD) model most closely predicted the measured deposition when using the new PNNL lung model. The individual variability in measured particle deposition was best explained by breathing pattern and distal airspace radius (rAiDA) at half inflation from AiDA. All models underestimated inter-subject variability even though the individual breathing pattern and functional residual capacity for each participant was used in the model.

CONCLUSIONS

Whole lung models need to be tuned and improved to predict the respiratory tract particle deposition of micron-sized particles, and to capture individual variations - a variation that is known to be higher for aged and diseased lungs. Further, the results support the hypothesis that the AiDA method measures dimensions in the peripheral lung and that rAiDA, as measured by the AiDA, can be used to better understand the individual variation in the dose to healthy and diseased lungs.

In silico prediction of e-cigarette aerosol particle transport and deposition within the airways

Electronic cigarettes (ECs) generate aerosols by heating up a liquid ('e-liquid') that typically consists of propylene glycol (PG), vegetable glycerol (VG), nicotine and flavouring agents. These aerosols transport through the airway tree, and lung and deposit non-uniformly in the bronchi and alveoli. Studying the transport of aerosols through lung airways is necessary because it provides information about the concentration and deposition of particles in the upper and lower airways. Here, particle transport and deposition were simulated within an anatomically-realistic airway model, which was constructed from computed tomography imaging. Particle transport was simulated using the advection-diffusion equations. Particle deposition was estimated using three different mechanisms; including sedimentation, impaction and Brownian diffusion. Results show that by increasing the particle size (PS) from 50 nm to 500 nm, the total deposition efficiency decreased from 50% to 10%, and then by increasing the PS to 3 μm, it increased to 60%. In addition, Brownian deposition was the dominant mechanism for nanoparticles (PS≪0.5μm), while the sedimentation deposition mechanism was the dominant one for microparticles (PS≫0.5μm).Clinical relevance-There is an urgent need to understand the risk that ECs pose to human health and to determine the safest methods for using these devices to support smoking cessation whilst also minimising harm. The results of this study will be used to simulate the conditions such as aerosol concentration and flow rate in airways and alveoli to use in in vitro studies.

Perchlorate in fine particulate matter in Shenzhen, China, and implications for human inhalation exposure

The wide application of perchlorate in military and aerospace industries raises potential exposure risks for humans. Previous studies have mainly focused on perchlorate in drinking water, foodstuffs and dust, while its exposure in fine particulate matter (PM_2.5) has received less attention. Thus, we investigated its concentrations and temporal variability in PM_2.5 from October 2020 to September 2021 in Shenzhen, southern China. We also assessed the native population's intake and uptake of perchlorate in PM_2.5 via inhalation. Measured PM_2.5 concentrations in samples from Shenzhen ranged from 2.0 to 91.9 μg m^-3. According to air quality guidelines proposed by the World Health Organization, 12.7% of all the samples exceeded interim target 1 (> 35 μg m^-3), and only 37.3% met interim target 3 (< 15 μg m^-3). Logistic regression analysis showed that perchlorate concentrations positively correlated with the PM_2.5 concentrations and negatively correlated with precipitation. The median estimated daily intake (EDI) was highest for infants (0.029 ng kg^-1 day^-1), and both EDIs and estimated daily uptakes (EDUs) gradually decreased with age. All the EDIs and EDUs were below the reference dose provided by the US National Academy of Sciences (NAS), indicating that exposure to perchlorate in PM_2.5 posed negligible health risks for Shenzhen residents. However, the exposure of infants and specific groups who tend to be more highly exposed than average still warrants attention.

Toxicological Profile of PM from Different Sources in the Bronchial Epithelial Cell Line BEAS-2B

The toxicity of particulate matter (PM) is strictly associated with its physical-chemical characteristics, such as size or chemical composition. While these properties depend on the origin of the particles, the study of the toxicological profile of PM from single sources has rarely been highlighted. Hence, the focus of this research was to investigate the biological effects of PM from five relevant sources of atmospheric PM: diesel exhaust particles, coke dust, pellet ashes, incinerator ashes, and brake dust. Cytotoxicity, genotoxicity, oxidative, and inflammatory response were assessed in a bronchial cell line (BEAS-2B). BEAS-2B cells were exposed to different concentrations (25, 50, 100, and 150 μg/mL medium) of particles suspended in water. The exposure lasted 24 h for all the assays performed, except for reactive oxygen species, which were evaluated after 30 min, 1 h, and 4 h of treatment. The results showed a different action of the five types of PM. All the tested samples showed a genotoxic action on BEAS-2B, even in the absence of oxidative stress induction. Pellet ashes seemed to be the only ones able to induce oxidative stress by boosting the formation of reactive oxygen species, while brake dust resulted in the most cytotoxic. In conclusion, the study elucidated the differential response of bronchial cells to PM samples generated by different sources. The comparison could be a starting point for a regulatory intervention since it highlighted the toxic potential of each type of PM tested.

Size-resolved characterization of particles >10 nm emitted to air during metal recycling

BACKGROUND

In the strive towards a circular economy, metal waste recycling is a growing industry. During the recycling process, particulate matter containing toxic and allergenic metals will be emitted to the air causing unintentional exposure to humans and environment.

OBJECTIVE

In this study detailed characterization of particle emissions and workplace exposures were performed, covering the full size range from 10 nm to 10 µm, during recycling of three different material flows: Waste of electrical and electronic equipment (WEEE), metal scrap, and cables.

METHODS

Both direct-reading instruments (minute resolution), and time-integrated filter measurements for gravimetric and chemical analysis were used. Additionally, optical sensors were applied and evaluated for long-term online monitoring of air quality in industrial settings.

RESULTS

The highest concentrations, in all particle sizes, and with respect both to particle mass and number, were measured in the WEEE flow, followed by the metal scrap flow. The number fraction of nanoparticles was high for all material flows (0.66-0.86). The most abundant metals were Fe, Al, Zn, Pb and Cu. Other elements of toxicological interest were Mn, Ba and Co.

SIGNIFICANCE

The large fraction of nanoparticles, and the fact that their chemical composition deviate from that of the coarse particles, raises questions that needs to be further addressed including toxicological implications, both for humans and for the environment.

Investigation of the Exposure of Schoolchildren to Ultrafine Particles (PM0.1) during the COVID-19 Pandemic in a Medium-Sized City in Indonesia

The health risk of schoolchildren who were exposed to airborne fine and ultrafine particles (PM0.1) during the COVID-19 pandemic in the Jambi City (a medium-sized city in Sumatra Island), Indonesia was examined. A questionnaire survey was used to collect information on schoolchildren from selected schools and involved information on personal profiles; living conditions; daily activities and health status. Size-segregated ambient particulate matter (PM) in school environments was collected over a period of 24 h on weekdays and the weekend. The personal exposure of PM of eight selected schoolchildren from five schools was evaluated for a 12-h period during the daytime using a personal air sampler for PM0.1 particles. The schoolchildren spent their time mostly indoors (~88%), while the remaining ~12% was spent in traveling and outdoor activities. The average exposure level was 1.5~7.6 times higher than the outdoor level and it was particularly high for the PM0.1 fraction (4.8~7.6 times). Cooking was shown to be a key parameter that explains such a large increase in the exposure level. The PM0.1 had the largest total respiratory deposition doses (RDDs), particularly during light exercise. The high level of PM0.1 exposure by indoor sources potentially associated with health risks was shown to be important.

A novel in-situ method to determine the respiratory tract deposition of carbonaceous particles reveals dangers of public commuting in highly polluted megacity

Background

Exposure to air pollutants is one of the major environmental health risks faced by populations globally. Information about inhaled particle deposition dose is crucial in establishing the dose–response function for assessing health-related effects due to exposure to air pollution.

Objective

This study aims to quantify the respiratory tract deposition (RTD) of equivalent black carbon (BC) particles in healthy young adults during a real-world commuting scenario, analyze factors affecting RTD of BC, and provide key parameters for the assessment of RTD.

Methods

A novel in situ method was applied to experimentally determine the RTD of BC particles among subjects in the highly polluted megacity of Metro Manila, Philippines. Exposure measurements were made for 40 volunteers during public transport and walking.

Results

The observed BC exposure concentration was up to 17-times higher than in developed regions. The deposition dose rate (DDR) of BC was up to 3 times higher during commute inside a public transport compared to walking (11.6 versus 4.4 μg hr⁻¹, respectively). This is twice higher than reported in similar studies. The average BC mass deposition fraction (DF) was found to be 43 ± 16%, which can in large be described by individual factors and does not depend on gender.

Conclusions

Commuting by open-sided public transport, commonly used in developing regions, poses a significant health risk due to acquiring extremely high doses of carcinogenic traffic-related pollutants. There is an urgent need to drastically update air pollution mitigation strategies for reduction of dangerously high emissions of BC in urban setting in developing regions. The presented mobile measurement set-up to determine respiratory tract deposition dose is a practical and cost-effective tool that can be used to investigate respiratory deposition in challenging environments.

Supplementary Information

The online version contains supplementary material available at 10.1186/s12989-022-00501-x.

Health risk assessment of particulate matter 2.5 in an academic metallurgy workshop

Exposure to indoor PM_2.5 is associated with allergies, eye and skin irritation, lung cancer, and cardiopulmonary diseases. To control indoor PM_2.5 and protect the health of occupants, exposure and health studies are necessary. In this study, exposure to PM_2.5 released in an academic metallurgy workshop was assessed and a health risk assessment was conducted for male and female students and technicians. Polycarbonate membrane filters and an active pump operating at a flow rate of 2.5 L/min were used to collect PM_2.5 from Monday to Friday for 3 months (August-October 2020) from 08:00-16:00. PM_2.5 mass concentrations were obtained gravimetrically, and the Multiple-Path Particle Dosimetry model was used to predict the deposition, retention, and clearance of PM_2.5 in the respiratory tract system. The risk of developing carcinogenic and non-carcinogenic effects among students and technicians was determined. The average PM_2.5 mass concentration for August was 32.6 μg/m³ 32.8 μg/m³ for September, and 32.2 μg/m³ for October. The head region accounted for the highest deposition fraction (49.02%), followed by the pulmonary (35.75%) and tracheobronchial regions (15.26%). Approximately 0.55 mg of PM_2.5 was still retained in the alveolar region 7 days after exposure. The HQ for male and female students was <1 while that of male and female technicians was >1, suggesting that technicians are at risk of developing non-carcinogenic health effects compared with students. The results showed a risk of developing carcinogenic health effects among male and female technicians (>1 × 10^-5 ); however, there was no excess cancer risk for students (<1 × 10^-6 ). This study highlights the importance of exposure and health studies in academic micro-environments such as metallurgy workshops which are often less researched, and exposure is underestimated. The results also indicated the need to implement control measures to protect the health of the occupants and ensure that the workshop rules are adhered to.

The physics of respiratory particle generation, fate in the air, and inhalation

Given that breathing is one of the most fundamental physiological functions, there is an urgent need to broaden our understanding of the fluid dynamics that governs it. There would be many benefits from doing so, including a better assessment of respiratory health, a basis for more precise delivery of pharmaceutical drugs for treatment, and the understanding and potential minimization of respiratory infection transmission. We review the physics of particle generation in the respiratory tract, the fate of these particles in the air on exhalation and the physics of particle inhalation. The main focus is on evidence from experimental studies. We conclude that although there is qualitative understanding of the generation of particles in the respiratory tract, a basic quantitative knowledge of the characteristics of the particles emitted during respiratory activities and their fate after emission, and a theoretical understanding of particle deposition during inhalation, nevertheless the general understanding of the entire process is rudimentary, and many open questions remain.

Advanced Respiratory Models for Hazard Assessment of Nanomaterials—Performance of Mono-, Co- and Tricultures

Advanced in vitro models are needed to support next-generation risk assessment (NGRA), moving from hazard assessment based mainly on animal studies to the application of new alternative methods (NAMs). Advanced models must be tested for hazard assessment of nanomaterials (NMs). The aim of this study was to perform an interlaboratory trial across two laboratories to test the robustness of and optimize a 3D lung model of human epithelial A549 cells cultivated at the air–liquid interface (ALI). Potential change in sensitivity in hazard identification when adding complexity, going from monocultures to co- and tricultures, was tested by including human endothelial cells EA.hy926 and differentiated monocytes dTHP-1. All models were exposed to NM-300K in an aerosol exposure system (VITROCELL^® cloud-chamber). Cyto- and genotoxicity were measured by AlamarBlue and comet assay. Cellular uptake was investigated with transmission electron microscopy. The models were characterized by confocal microscopy and barrier function tested. We demonstrated that this advanced lung model is applicable for hazard assessment of NMs. The results point to a change in sensitivity of the model by adding complexity and to the importance of detailed protocols for robustness and reproducibility of advanced in vitro models.

Insights into the Profile of the Human Expiratory Microbiota and Its Associations with Indoor Microbiotas

Microorganisms residing in the human respiratory tract can be exhaled, and they constitute a part of environmental microbiotas. However, the expiratory microbiota community and its associations with environmental microbiotas remain poorly understood. Here, expiratory bacteria and fungi and the corresponding microbiotas from the living environments were characterized by DNA amplicon sequencing of residents' exhaled breath condensate (EBC) and environmental samples collected from 14 residences in Nanjing, China. The microbiotas of EBC samples, with a substantial heterogeneity, were found to be as diverse as those of skin, floor dust, and airborne microbiotas. Model fitting results demonstrated the role of stochastic processes in the assembly of the expiratory microbiota. Using a fast expectation-maximization algorithm, microbial community analysis revealed that expiratory microbiotas were differentially associated with other types of microbiotas in a type-dependent and residence-specific manner. Importantly, the expiratory bacteria showed a composition similarity with airborne bacteria in the bathroom and kitchen environments with an average of 12.60%, while the expiratory fungi showed a 53.99% composition similarity with the floor dust fungi. These differential patterns indicate different relationships between expiratory microbiotas and the airborne microbiotas and floor dust microbiotas. The results here illustrated for the first time the associations between expiratory microbiotas and indoor microbiotas, showing a potential microbial exchange between the respiratory tract and indoor environment. Thus, improved hygiene and ventilation practices can be implemented to optimize the indoor microbial exposome, especially in indoor bathrooms and kitchens.

Differentiating Semi-Volatile and Solid Particle Events Using Low-Cost Lung-Deposited Surface Area and Black Carbon Sensors

Low-cost particle sensors have proven useful in applications such as source apportionment, health, and reactivity studies. The benefits of these instruments increase when used in parallel, as exemplified with a 3-month long deployment in an urban background site. Using two lung-deposited surface area (LDSA) instruments, a low-cost method was developed to assess the solid component of an aerosol by applying a catalytic stripper to the inlet stream of one LDSA instrument, resulting in only the solid fraction of the sample being measured (LDSAc). To determine the semi-volatile fraction of the sample, the LDSAC was compared to the LDSA without a catalytic stripper, thus measuring all particles (LDSAN). The ratio of LDSA (LDSAC/LDSAN) was used to assess the fraction of solid and semi-volatile particles within a sample. Here, a low ratio represents a high fraction of semi-volatile particles, with a high ratio indicating a high fraction of solid particles. During the 3-month urban background study in Birmingham, UK, it is shown that the LDSA ratios ranged from 0.2–0.95 indicating a wide variation in sources and subsequent semi-volatile fraction of particles. A black carbon (BC) instrument was used to provide a low-cost measure of LDSA to BC ratio. Comparatively, the LDSA to BC ratios obtained using low-cost sensors showed similar results to high-cost analyses for urban environments. During a high LDSAC/LDSAN ratio sampling period, representing high solid particle concentrations, an LDSA to BC probability distribution was shown to be multimodal, reflecting urban LDSA to BC ratio distributions measured with laboratory-grade instrumentation. Here, a low-cost approach for data analyses presents insight on particle characteristics and insight into PM composition and size, useful in source apportionment, health, and atmospheric studies.

Intervention of an Upgraded Ventilation System and Effects of the COVID-19 Lockdown on Air Quality at Birmingham New Street Railway Station

High NO2 concentrations (long term average of 383 µg/m3 in 2016/2017) recorded at Birmingham New Street railway station have resulted in the upgrade of the bi-directional fan system to aid wind dispersion within the enclosed platform environment. This paper attempts to examine how successful this intervention has been in improving air quality for both passengers and workers within the station. New air pollution data in 2020 has enabled comparisons to the 2016/2017 monitoring campaign revealing a 23-42% decrease in measured NO2 concentrations. The new levels of NO2 are below the Occupational Health standards but still well above the EU Public Health Standards. This reduction, together with a substantial decrease (up to 81%) in measured Particulate Matter (PM) concentrations, can most likely be attributed to the new fan system effectiveness. Carbon Monoxide levels were well below Occupational and Public Health Standards at all times. The COVID-19 pandemic "initial lockdown" period has also allowed an insight into the resultant air quality at lower rail-traffic intensities, which produced a further reduction in air pollutants, to roughly half the pre-lockdown concentrations. This study shows the scope of improvement that can be achieved through an engineering solution implemented to improve the ventilation system of an enclosed railway station. Further reduction in air pollution would require additional approaches, such as the removal of diesel engine exhaust emissions via the adoption of electric or diesel-electric hybrid powered services.

In vitro exposure to complete engine emissions - a mini-review

Outdoor air pollution is classified as carcinogenic to humans and exposure to it contributes to increased incidence of various diseases, including cardiovascular, neurological or pulmonary disorders. Vehicle engine emissions represent a significant part of outdoor air pollutants, particularly in large cities with high population density. Considering the potentially negative health impacts of engine emissions exposure, the application of reliable test systems allowing assessment of the biological effects of these pollutants is crucial. The exposure systems should use relevant, preferably multicellular, cell models that are treated with the complete engine exhaust (i.e. a realistic mixture of particles, chemical compounds bound to them and gaseous phase) at the air-liquid interface. The controlled delivery and characterization of chemical and/or particle composition of the exhaust should be possible. In this mini-review we report on such exposure systems that have been developed to date. We focus on a brief description and technical characterization of the systems, and discuss the biological parameters detected following exposure to a gasoline/diesel exhaust. Finally, we summarize and compare findings from the individual systems, including their advantages/limitations.

Modeling airborne pathogen transport and transmission risks of SARS-CoV-2

An integrated modeling approach has been developed to better understand the relative impacts of different expiratory and environmental factors on airborne pathogen transport and transmission, motivated by the recent COVID-19 pandemic. Computational fluid dynamics (CFD) modeling was used to simulate spatial-temporal aerosol concentrations and quantified risks of exposure as a function of separation distance, exposure duration, environmental conditions (e.g., airflow/ventilation), and face coverings. The CFD results were combined with infectivity models to determine probability of infection, which is a function of the spatial-temporal aerosol concentrations, viral load, infectivity rate, viral viability, lung-deposition probability, and inhalation rate. Uncertainty distributions were determined for these parameters from the literature. Probabilistic analyses were performed to determine cumulative distributions of infection probabilities and to determine the most important parameters impacting transmission. This modeling approach has relevance to both pathogen and pollutant dispersion from expelled aerosol plumes.

The Proposition of the Pulmonary Route as an Attractive Drug Delivery Approach of Nano-Based Immune Therapies and Cancer Vaccines to Treat Lung Tumors

Lung cancer is the leading cause of cancer related deaths globally, making it a major health concern. The lung’s permissive rich microenvironment is ideal for supporting outgrowth of disseminated tumors from pre-existing extra-pulmonary malignancies usually resulting in high mortality. Tumors occurring in the lungs are difficult to treat, necessitating the need for the development of advanced treatment modalities against primary tumors and secondary lung metastasis. In this review, we explore the pulmonary route as an attractive drug delivery approach to treat lung tumors. We also discuss the potential of pulmonary delivery of cancer vaccine vectors to induce mucosal immunity capable of preventing the seeding of tumors in the lung.

Role of CFD based in silico modelling in establishing an in vitro-in vivo correlation of aerosol deposition in the respiratory tract

Effective evaluation and prediction of aerosol transport deposition in the human respiratory tracts are critical to aerosol drug delivery and evaluation of inhalation products. Establishment of an in vitro-in vivo correlation (IVIVC) requires the understanding of flow and aerosol behaviour and underlying mechanisms at the microscopic scale. The achievement of the aim can be facilitated via computational fluid dynamics (CFD) based in silico modelling which treats the aerosol delivery as a two-phase flow. CFD modelling research, in particular coupling with discrete phase model (DPM) and discrete element method (DEM) approaches, has been rapidly developed in the past two decades. This paper reviews the recent development in this area. The paper covers the following aspects: geometric models of the respiratory tract, CFD turbulence models for gas phase and its coupling with DPM/DEM for aerosols, and CFD investigation of the effects of key factors associated with geometric variations, flow and powder characteristics. The review showed that in silico study based on CFD models can effectively evaluate and predict aerosol deposition pattern in human respiratory tracts. The review concludes with recommendations on future research to improve in silico prediction to achieve better IVIVC.

Exploring the Toxicity, Lung Distribution, and Cellular Uptake of Rifampicin and Ascorbic Acid-Loaded Alginate Nanoparticles as Therapeutic Treatment of Lung Intracellular Infections

Nanotechnology is a very promising technological tool to combat health problems associated with the loss of effectiveness of currently used antibiotics. Previously, we developed a formulation consisting of a chitosan and tween 80-decorated alginate nanocarrier that encapsulates rifampicin and the antioxidant ascorbic acid (RIF/ASC), intended for the treatment of respiratory intracellular infections. Here, we investigated the effects of RIF/ASC-loaded NPs on the respiratory mucus and the pulmonary surfactant. In addition, we evaluated their cytotoxicity for lung cells in vitro, and their biodistribution on rat lungs in vivo after their intratracheal administration. Findings herein demonstrated that RIF/ASC-loaded NPs display a favorable lung biocompatibility profile and a uniform distribution throughout lung lobules. RIF/ASC-loaded NPs were mainly uptaken by lung macrophages, their primary target. In summary, findings show that our novel designed RIF/ASC NPs could be a suitable system for antibiotic lung administration with promising perspectives for the treatment of pulmonary intracellular infections.

Mass dose rates of particle-bound organic pollutants in the human respiratory tract: Implications for inhalation exposure and risk estimations

To date, little is known about the effective doses of airborne particulate matter (PM) and PM-bound hazardous organic components to the human respiratory tract (HRT). In the light of this, here we provide particle mass dose rates (dose per hour of exposure) of PM and a suite of PM-bound hazardous organic compounds in the HRT for two population age groups (adults & children). More specifically, the mass dose rates of PM and PM-bound polycyclic aromatic hydrocarbons (PAHs), nitrated-PAH (NPAHs), polychlorinated biphenyls (PCBs), organochlorine pesticides (OCPs) and polybrominated diphenyl ethers (PBDEs) were estimated at two urban sites using a multiple path particle dosimetry model. We find that, in most cases, the total mass doses are following similar variations across sites and seasons as their ambient total concentrations, however their distribution in the HRT is a function of the particle size distributions and the physiological parameters of each age group. More specifically, the majority of the deposited mass of PM and all the chemical components investigated was accumulated in the upper airways instead of the lungs. We further show that children, due to their different physiology, are more susceptible and receive larger fraction of the total mass doses in the deepest parts of the lungs compared to the adults' group. Comparing the traditional method for estimating the inhalation risk, which is based on the ambient concentration of pollutants, and a modified version using the mass dose in the HRT, we find that the former may overestimate the reported risks. The results presented here provide a novel dataset composed by previously undetermined doses of hazardous airborne particulate organic components in the HRT and demonstrate that alternative health risk estimation approaches may capture some variabilities that are traditionally overlooked.

Health Risk Assessment of PM2.5 and PM2.5-Bound Trace Elements in Thohoyandou, South Africa

We assessed the health risks of fine particulate matter (PM_2.5) ambient air pollution and its trace elemental components in a rural South African community. Air pollution is the largest environmental cause of disease and disproportionately affects low- and middle-income countries. PM_2.5 samples were previously collected, April 2017 to April 2018, and PM_2.5 mass determined. The filters were analyzed for chemical composition. The United States Environmental Protection Agency’s (US EPA) health risk assessment method was applied. Reference doses were calculated from the World Health Organization (WHO) guidelines, South African National Ambient Air Quality Standards (NAAQS), and US EPA reference concentrations. Despite relatively moderate levels of PM_2.5 the health risks were substantial, especially for infants and children. The average annual PM_2.5 concentration was 11 µg/m³, which is above WHO guidelines, but below South African NAAQS. Adults were exposed to health risks from PM_2.5 during May to October, whereas infants and children were exposed to risk throughout the year. Particle-bound nickel posed both non-cancer and cancer risks. We conclude that PM_2.5 poses health risks in Thohoyandou, despite levels being compliant with yearly South African NAAQS. The results indicate that air quality standards need to be tightened and PM_2.5 levels lowered in South Africa.

Experimentally determined deposition of ambient urban ultrafine particles in the respiratory tract of children

A critical element of the risk assessment of exposure to airborne ambient ultrafine particles (UFP) is the quantification of respiratory tract deposition (RTD) of the particles, which is intrinsically challenging, particularly at the population scale. In this study, we used a recently proposed method to experimentally determine the RTD of urban UFP in a large group of children exposed to these particles in a school setting in Brisbane, Australia. Children are one of the most susceptible population groups; However, little is known about the deposition of UFP from urban traffic in their airways. In order to advance the knowledge in this field, the objectives of this study were: to determine the deposition of ambient urbane UFP in large number children, to catergorize the source of inhaled UFPs and hence to assess the contribution of air pollution sources to the deposition. RTD was measured in children aged 8-11 at primary schools using a flow-through chamber bag system. First, the inhaled and exhaled air was separated; then the particle number size distribution and particle number concentration were measured. The sources of inhaled UFP were categorized according to their particle number size distribution by a K means cluster technique. A total of 128 children from five schools performed the RTD measurement. The mean total deposition fraction of urban UFP in all children was 0.59 ± 0.10. Inhaled UFP were categorized into two groups: traffic and urban background, with the GMD of corresponding particle number size distribution of 20 nm and 40 nm, respectively. The total deposition fraction (mean ± SD) of UFP from these two groups was 0.68 ± 0.09 for traffic and 0.55 ± 0.08 for urban background respectively. This is the first study in which RTD was measured in a large group of children inhaling real urban UFP. First, we proved that this novel method can indeed be applied easily and quickly to a large group of people. Second, we quantified the RTD of children, thus providing an important input to the risk assessment for exposure to UFP.

Experimentally determined deposition of ambient urban ultrafine particles in the respiratory tract of children

A critical element of the risk assessment of exposure to airborne ambient ultrafine particles (UFP) is the quantification of respiratory tract deposition (RTD) of the particles, which is intrinsically challenging, particularly at the population scale. In this study, we used a recently proposed method to experimentally determine the RTD of urban UFP in a large group of children exposed to these particles in a school setting in Brisbane, Australia. Children are one of the most susceptible population groups; However, little is known about the deposition of UFP from urban traffic in their airways. In order to advance the knowledge in this field, the objectives of this study were: to determine the deposition of ambient urbane UFP in large number children, to catergorize the source of inhaled UFPs and hence to assess the contribution of air pollution sources to the deposition. RTD was measured in children aged 8-11 at primary schools using a flow-through chamber bag system. First, the inhaled and exhaled air was separated; then the particle number size distribution and particle number concentration were measured. The sources of inhaled UFP were categorized according to their particle number size distribution by a K means cluster technique. A total of 128 children from five schools performed the RTD measurement. The mean total deposition fraction of urban UFP in all children was 0.59 ± 0.10. Inhaled UFP were categorized into two groups: traffic and urban background, with the GMD of corresponding particle number size distribution of 20 nm and 40 nm, respectively. The total deposition fraction (mean ± SD) of UFP from these two groups was 0.68 ± 0.09 for traffic and 0.55 ± 0.08 for urban background respectively. This is the first study in which RTD was measured in a large group of children inhaling real urban UFP. First, we proved that this novel method can indeed be applied easily and quickly to a large group of people. Second, we quantified the RTD of children, thus providing an important input to the risk assessment for exposure to UFP.

Assessment of indoor air exposure at residential homes: Inhalation dose and lung deposition of PM10, PM2.5 and ultrafine particles among newborn children and their mothers

Accurate assessment of particulate matter (PM) dose and respiratory deposition is essential to better understand the risks of exposure to PM and, consequently, to develop the respective risk-control strategies. In homes, this is especially relevant in regards to ultrafine particles (UFP; <0.1 μm) which origin in these environments is mostly due to indoor sources. Thus, this study aimed to estimate inhalation doses for different PM mass/number size fractions (i.e., PM₁₀, PM_2.5 and UFP) in indoor air of residential homes and to quantify the deposition (total, regional and lobar) in human respiratory tract for both newborn children and mothers. Indoor real-time measurements of PM₁₀, PM_2.5 and UFP were conducted in 65 residential homes situated in Oporto metropolitan area (Portugal). Inhalation doses were estimated based on the physical characteristics of individual subjects and their activity patterns. The multi-path particle dosimetry model was used to quantify age-specific depositions in human respiratory tract. The results showed that 3-month old infants exhibited 4-fold higher inhalation doses than their mothers. PM₁₀ were primarily deposited in the head region (87%), while PM_2.5 and UFP depositions mainly occurred in the pulmonary area (39% and 43%, respectively). Subject age affected the pulmonary region and the total lung deposition; higher deposition being observed among the newborns. Similarly, lower lobes (left lobe: 37% and right lobe: 30%) received higher PM deposition than upper and middle lobes; right lobes lung are prone to be more susceptible to respiratory problems, since asymmetric deposition was observed. Considering that PM-related diseases occur at specific sites of respiratory system, quantification of site-specific particle deposition should be predicted in order to better evidence the respective health outcomes resulting from inhaled PM.

Influence of Carbon Nanosheets on the Behavior of 1,2-Dipalmitoyl-sn-glycerol-3-phosphocholine Langmuir Monolayers

Carbon nanomaterials are widespread in the atmospheric aerosol as a result of the combustion processes and their extensive industrial use. This has raised many question about the potential toxicity associated with the inhalation of such nanoparticles, and its incorporation into the lung surfactant layer. In order to shed light on the main physical bases underlying the incorporation of carbon nanomaterials into lung surfactant layers, this work has studied the interaction at the water/vapor interface of carbon nanosheets (CN) with Langmuir monolayers of 1,2-Dipalmitoyl-sn-glycerol-3-phosphocholine (DPPC), with this lipid being the main component of lung surfactant layers and responsible of some of the most relevant features of such film. The incorporation of CN into DPPC Langmuir monolayers modifies the lateral organization of the DPPC at the interface, which is explained on the basis of two different effects: (i) particles occupy part of the interfacial area, and (ii) impoverishment of the lipid composition of the interface due to lipid adsorption onto the CN surface. This results in a worsening of the mechanical performance of the monolayers which may present a negative impact in the physiological performance of lung surfactant. It would be expected that the results obtained here can be useful as a step toward the understanding of the most fundamental physico-chemical bases associated with the effect of inhaled particles in the respiratory cycle.

Development of an ex vivo preclinical respiratory model of idiopathic pulmonary fibrosis for aerosol regional studies

Idiopathic pulmonary fibrosis is a progressive disease with unsatisfactory systemic treatments. Aerosol drug delivery to the lungs is expected to be an interesting route of administration. However, due to the alterations of lung compliance caused by fibrosis, local delivery remains challenging. This work aimed to develop a practical, relevant and ethically less restricted ex vivo respiratory model of fibrotic lung for regional aerosol deposition studies. This model is composed of an Ear-Nose-Throat replica connected to a sealed enclosure containing an ex vivo porcine respiratory tract, which was modified to mimic the mechanical properties of fibrotic lung parenchyma - i.e. reduced compliance. Passive respiratory mechanics were measured. ^81mKr scintigraphies were used to assess the homogeneity of gas-ventilation, while regional aerosol deposition was assessed with ^99mTc-DTPA scintigraphies. We validated the procedure to induce modifications of lung parenchyma to obtain aimed variation of compliance. Compared to the healthy model, lung respiratory mechanics were modified to the same extent as IPF-suffering patients. ^81mKr gas-ventilation and ^99mTc-DTPA regional aerosol deposition showed results comparable to clinical studies, qualitatively. This ex vivo respiratory model could simulate lung fibrosis for aerosol regional deposition studies giving an interesting alternative to animal experiments, accelerating and facilitating preclinical studies before clinical trials.

The Effect of Aging on Aerosol Bolus Deposition in the Healthy Adult Lung: A 19-Year Longitudinal Study

Background: While it is recognized that peripheral lung structure and ventilation heterogeneity change with age, the effects of age on aerosol deposition in the healthy adult lung is largely unknown. Methods: A series of aerosol bolus inhalations were repeatedly performed in four healthy subjects over a period of 19 years (years = 0, 9, 15 and 19). For each series, a bolus of 1 μm particles was inhaled at penetration volumes (V_p) ranging from 200 to 1200 mL. Aerosol bolus deposition (DE), dispersion (H), and mode shift (MS) were calculated along with the rate of increase in these parameters with increasing V_p (slope-DE, slope-H, and slope-MS). Results: Slope-DE significantly increased from 0.040 ± 0.014 (mean ± standard deviation) at year 0 to 0.069 ± 0.007%/mL at year 19 (p = 0.02) with no significant difference in DE at shallow depth (V_p = 200 mL; 14% ± 4% at year 0 vs. 15% ± 7% at year 19, p = 0.25). There was no significant effect of age on either slope-H (0.44 ± 0.05 at year 0 vs. 0.47 ± 0.09 mL/mL at year 19, p = 0.6) or dispersion at shallow depth (192 ± 36 mL at year 0 vs. 220 ± 54 mL at year 19, p = 0.2). Slope-MS became significantly more negative with increasing age (-0.096 ± 0.044 at year 0 vs. -0.171 ± 0.027 mL/mL at year 19, p = 0.001) with no significant difference in MS at shallow depth (12 ± 10 at year 0 vs. 7 ± 15 mL at year 19, p = 0.3). Conclusions: These data suggest that (1) peripheral deposition increases with aging in the healthy lung, likely as a result of increasing closing volume with age; (2) alterations in the mechanical properties of healthy adult lungs with age occur uniformly; and (3) the significant increase in the magnitude of MS-slope with age is likely due to the concomitant increase in peripheral deposition and possible alterations in flow sequencing.

The role of sex in particle-induced inflammation and injury

The use of engineered nanomaterials within various applications such as medicine, electronics, and cosmetics has been steadily increasing; therefore, the rate of occupational and environmental exposures has also increased. Inhalation is an important route of exposure to nanomaterials and has been shown to cause various respiratory diseases in animal models. Human lung disease frequently presents with a sex/gender-bias in prevalence or severity, but investigation of potential sex-differences in the adverse health outcomes associated with nanoparticle inhalation is greatly lacking. Only ~20% of basic research in the general sciences use both male and female animals and a substantial percentage of these do not address differences between sexes within their analyses. This has prevented researchers from fully understanding the impact of sex-based variables on health and disease, particularly the pathologies resulting from the inhalation of particles. The mechanisms responsible for sex-differences in respiratory disease remain unclear, but could be related to a number of variables including sex-differences in hormone signaling, lung physiology, or respiratory immune function. By incorporating sex-based analysis into respiratory nanotoxicology and utilizing human data from other relevant particles (e.g., asbestos, silica, particulate matter), we can improve our understanding of sex as a biological variable in nanoparticle exposures. This article is categorized under: Toxicology and Regulatory Issues in Nanomedicine > Toxicology of Nanomaterials.

Seasonal profiles of atmospheric PAHs in an e-waste dismantling area and their associated health risk considering bioaccessible PAHs in the human lung

Due to the development of the economy, electronic waste (e-waste) has become a new global problem and e-waste dismantling processes are an important source of air pollution. Among the pollutants emitted, polycyclic aromatic hydrocarbons (PAHs) are a severe concern because of their carcinogenic and mutagenic properties. However, few studies have investigated the atmospheric PAHs generated by e-waste dismantling in a specific region, especially the PAH levels throughout the year. Thus, we assessed the effects of PAHs on the local air quality by sampling the total suspended particulates (TSP), PM₁₀, PM_2.5, and gaseous phase from an e-waste dismantling area and a control site during four seasons. The TSP, PM₁₀, and PM_2.5 concentrations were measured as 84.8-414, 70.7-302, and 57.1-204 μg m^-3, respectively, in this area, and those of three types of particulate bound-PAHs and gaseous phase PAHs were 2.6-16.1, 2.2-15.1, 1.9-14.6, and 20.1-72.8 ng m^-3, respectively. The pollutant levels were higher in the spring and winter than those in the summer and autumn. The PAH sources were identified by diagnostic ratio approaches and principal component analysis. E-waste dismantling was identified as the major source of PAH pollution within this area, where approximately 82.4% of the PAHs was attributed to e-waste dismantling at an industrial park (EP site). Among the sites sampled, the pollutant levels and cancer risk were highest at the EP site, and they could pose a cancer risk for humans, although only the bioaccessible PAHs in human lungs were considered. In particular, infants had a higher health risk than adults, thereby suggesting that air pollution with PAHs is a concern in this area. This study provides clear evidence of the requirement for control measurements of e-waste dismantling processes.

Regional Inhaled Deposited Dose of Urban Aerosols in an Eastern Mediterranean City

We calculated the regional deposited dose of inhaled particulate matter based on number/mass concentrations in Amman, Jordan. The dose rate was the highest during exercising but was generally lower for females compared to males. The fine particles dose rate was 1010–1011 particles/h (101–102 µg/h). The PM10 dose rate was 49–439 µg/h for males and 36–381 µg/h for females. While resting, the PM10 deposited in the head airways was 67–77% and 8–12% in the tracheobronchial region. When exercising, the head airways received 37–44% of the PM10, whereas the tracheobronchial region received 31–35%. About 8% (exercise) and 14–16% (rest) of the PM2.5 was received in the head airways, whereas the alveolar received 74–76% (exercise) and 54–62% (rest). Extending the results for common exposure scenarios in the city revealed alarming results for service workers and police officers; they might receive PM2.5 and 220 µg/h PM10 while doing their duty on main roads adjacent to traffic. This is especially critical for a pregnant police officer. Outdoor athletic activities (e.g., jogging along main roads) are associated with high PM2.5 and PM10 dose rates (100 µg/h and ~425 µg/h, respectively).

In Vitro, in Vivo, and Spectroscopic Assessment of Lead Exposure Reduction via Ingestion and Inhalation Pathways Using Phosphate and Iron Amendments

This study compared lead (Pb) immobilization efficacies in mining/smelting impacted soil using phosphate and iron amendments via ingestion and inhalation pathways using in vitro and in vivo assays, in conjunction with investigating the dynamics of dust particles in the lungs and gastro-intestinal tract via X-ray fluorescence (XRF) microscopy. Phosphate amendments [phosphoric acid (PA), hydroxyapatite, monoammonium phosphate (MAP), triple super phosphate (TSP), and bone meal biochar] and hematite were applied at a molar ratio of Pb:Fe/P = 1:5. Pb phosphate formation was investigated in the soil/post-in vitro bioaccessibility (IVBA) residuals and in mouse lung via extended X-ray absorption fine structure (EXAFS) and X-ray absorption near edge structures (XANES) spectroscopy, respectively. EXAFS analysis revealed that anglesite was the dominant phase in the ingestible (<250 μm) and inhalable (<10 μm) particle fractions. Pb IVBA was significantly reduced (p < 0.05) by phosphate amendments in the <250 μm fraction (solubility bioaccessibility research consortium assay) and by PA, MAP, and TSP in the <10 μm fraction (inhalation-ingestion bioaccessibility assay). A 21.1% reduction in Pb RBA (<250 μm fraction) and 56.4% reduction in blood Pb concentration (<10 μm fraction) were observed via the ingestion and inhalation pathways, respectively. XRF microscopy detected Pb in the stomach within 4 h, presumably via mucociliary clearance.

Respiratory tract deposition of inhaled roadside ultrafine refractory particles in a polluted megacity of South-East Asia

Recent studies demonstrate that Black Carbon (BC) pollution in economically developing megacities remain higher than the values, which the World Health Organization considers to be safe. Despite the scientific evidence of the degrees of BC exposure, there is still a lack of understanding on how the severe levels of BC pollution affect human health in these regions. We consider information on the respiratory tract deposition dose (DD) of BC to be essential in understanding the link between personal exposure to air pollutants and corresponding health effects. In this work, we combine data on fine and ultrafine refractory particle number concentrations (BC proxy), and activity patterns to derive the respiratory tract deposited amounts of BC particles for the population of the highly polluted metropolitan area of Manila, Philippines. We calculated the total DD of refractory particles based on three metrics: refractory particle number, surface area, and mass concentrations. The calculated DD of total refractory particle number in Metro Manila was found to be 1.6 to 17 times higher than average values reported from Europe and the U.S. In the case of Manila, ultrafine particles smaller than 100 nm accounted for more than 90% of the total deposited refractory particle dose in terms of particle number. This work is a first attempt to quantitatively evaluate the DD of refractory particles and raise awareness in assessing pollution-related health effects in developing megacities. We demonstrate that the majority of the population may be highly affected by BC pollution, which is known to have negative health outcomes if no actions are taken to mitigate its emission. For the governments of such metropolitan areas, we suggest to revise currently existing environmental legislation, raise public awareness, and to establish supplementary monitoring of black carbon in parallel to already existing PM₁₀ and PM_2.5 measures.

Comparison of Salbutamol Delivery Efficiency for Jet versus Mesh Nebulizer Using Mice

Recent reports using a breathing simulator system have suggested that mesh nebulizers provide more effective medication delivery than jet nebulizers. In this study, the performances of jet and mesh nebulizers were evaluated by comparing their aerosol drug delivery efficiencies in mice. We compared four home nebulizers: two jet nebulizers (PARI BOY SX with red and blue nozzles), a static mesh nebulizer (NE-U22), and a vibrating mesh nebulizer (NE-SM1). After mice were exposed to salbutamol aerosol, the levels of salbutamol in serum and lung were estimated by ELISA. The residual volume of salbutamol was the largest at 34.6% in PARI BOY SX, while the values for NE-U22 and NE-SM1 mesh nebulizers were each less than 1%. The salbutamol delivery efficiencies of NE-U22 and NE-SM1 were higher than that of PARI BOY SX, as the total delivered amounts of lung and serum were 39.9% and 141.7% as compared to PARI BOY SX, respectively. The delivery efficiency of the mesh nebulizer was better than that of the jet nebulizer. Although the jet nebulizer can generate smaller aerosol particles than the mesh nebulizer used in this study, the output rate of the jet nebulizer is low, resulting in lower salbutamol delivery efficiency. Therefore, clinical validation of the drug delivery efficiency according to nebulizer type is necessary to avoid overdose and reduced drug wastage.

Characterization of Human Health Risks from Particulate Air Pollution in Selected European Cities

The objective of the current study was to estimate health risk indexes caused by the inhalation of particulate matter (PM) by adult males and children using data sampled in three European cities (Athens, Kuopio, Lisbon). Accordingly, the cancer risk (CR) and the hazard quotient (HQ) were estimated from particle-bound metal concentrations whilst the epidemiology-based excess risk (ER), the attributable fraction (AF), and the mortality cases were obtained due to exposure to PM10 and PM2.5. CR and HQ were estimated using two methodologies: the first methodology incorporated the particle-bound metal concentrations (As, Cd, Co, Cr, Mn, Ni, Pb) whereas the second methodology used the deposited dose rate of particle-bound metals in the respiratory tract. The indoor concentration accounts for 70% infiltration from outdoor air for the time activity periods allocated to indoor environments. HQ was lower than 1 and the cumulative CR was lower than the acceptable level (10−4), although individual CR for some metals exceeded the acceptable limit (10−6). In a lifetime the estimated number of attributable cancer cases was 74, 0.107, and 217 in Athens, Kuopio, and Lisbon, respectively. Excess risk-based mortality estimates (due to outdoor pollution) for fine particles were 3930, 44.1, and 2820 attributable deaths in Athens, Kuopio, and Lisbon, respectively.

Chlorinated paraffins in the indoor and outdoor atmospheric particles from the Pearl River Delta: Characteristics, sources, and human exposure risks

Chlorinated paraffins (CPs) are ubiquitously present in the environment due to their abundant production and consumption. Information on CPs as part of indoor particles is very limited although a significant amount of time is spent in indoor environments. Seventy-two indoor and 66 outdoor TSP/PM₁₀/PM_2.5 samples (particulate matters with aerodynamic diameter <100, 10, and 2.5μm) from 24 homes of the Pearl River Delta (PRD), China, were analyzed for CPs. PM_2.5 were found to be the dominant particles both indoors and outdoors. CPs were mainly distributed in PM_2.5 that accounted for 89.1% and 93.0% of the total particles indoors and outdoors, respectively. The geometric mean (GM) concentrations of medium-chain CPs (MCCPs) exceeded those of short-chain CPs (SCCPs) (22.0 vs. 9.2ng/m³) in all particle samples. Both SCCPs and MCCPs in the indoor particles (GM: 13.4 and 30.9ng/m³) were approximately twice as high as in the outdoor environment (GM: 6.1 and 15.2ng/m³). C₁₁ and C₁₄ carbon chains as well as six and seven chlorine homologues were found to be predominant in all samples with average percentages of 43.0% and 55.4%, respectively. The estimated daily CP intakes via PM_2.5 inhalation were 8.1-24.6 and 25.1-76.0ng/kg·bw/day for all age subgroups based on both mean and 95th percentile concentrations of CPs. However, the estimated daily uptakes decreased to 4.4-16.4 and 13.5-50.6ng/kg·bw/day, respectively, when the deposition fractions of PM_2.5 in the human lung were considered. Indoor PM_2.5 attributed to 93.8% exposure of CPs based on both total estimated daily intakes (EDIs) and estimated daily uptakes (EDUs), indicating that the indoor PM_2.5 exposure was very important. Infants and toddlers suffered higher exposure risks of CPs compared to other subgroups, indicating higher potential health risks; however, based on the margin of the exposure analysis these risks could be ignored.

A new approach to estimate ultrafine particle respiratory deposition

Ultrafine particles (UFPs) in workplaces have been and continue to be an important occupational health concern. The inhalation and the consequent deposition of UFPs in workers' lower airways can lead to many adverse health effects. Therefore, it is vital to study the deposition of UFPs in the human respiratory tract from the viewpoint of occupational health. In this study, a set of physiologically representative human tracheobronchial airway replicas were made using high-resolution 3D printers, and a new approach that was distinct from the traditional methods was developed to apply these airway replicas in estimating UFP respiratory deposition. The results showed that UFP respiratory deposition could be readily and systematically measured by the differential-based approach. The results of this study imply the feasibility of developing a mobile aerosol lung deposition apparatus in the future for on-site workplace UFP respiratory deposition to evaluate the UFP inhalation dosimetry for workers in the real workplaces.

Charting the human respiratory tract with airborne nanoparticles: evaluation of the Airspace Dimension Assessment technique

Airspace Dimension Assessment (AiDA) is a technique to assess lung morphology by measuring lung deposition of inhaled nanoparticles. Nanoparticles deposit in the lungs predominately by diffusion, and average diffusion distances, corresponding to effective airspace radii ( rAiDA), can be inferred from measurements of particle recovery after varied breath holds. Also, particle recovery after a 0-s breath hold ( R0) may hold information about the small conducting airways. This study investigates rAiDA at different volumetric sample depths in the lungs of healthy subjects. Measurements were performed with 50-nm polystyrene nanospheres on 19 healthy subjects aged 17–67 yr. Volumetric sample depths ranged from 200 to 5,000 ml and breath-hold times from 5 to 20 s. At the examined volumetric sample depths, rAiDA values ranged from ~200–600 μm, which correspond to dimensions of the bronchiolar and the gas-exchanging regions of the lungs. R0 decreased with volumetric sample depth and showed more intersubject variation than rAiDA. Correlations were found between the AiDA parameters, anthropometry, and lung function tests, but not between rAiDA and R0. For repeated measurements on 3 subjects over an 18-mo period, rAiDA varied on average within ± 7 μm (± 2.4%). The results indicate that AiDA has potential as an efficient new in vivo technique to assess individual lung properties. The information obtained by such measurements may be of value for lung diagnostics, especially for the distal lungs, which are challenging to examine directly by other means.

NEW & NOTEWORTHY This is the first study to measure effective airspace radii ( rAiDA) at volumetric sample depths 200–5,000 ml in healthy subjects by Airspace Dimension Assessment (AiDA). Observed rAiDA were 200–600 μm, which corresponds to airspaces for the bronchiolar and the gas-exchanging regions around airway generation 14–17. rAiDA correlated with lung function tests and anthropometry. Measurements of rAiDA on 3 subjects over 11–18 mo were within ± 7 μm.

Particle size spectrometer using inertial classification and electrical measurement techniques for real-time monitoring of particle size distribution

To achieve real-time monitoring of aerodynamic submicron particle size distributions at a point-of-interest, we developed a high-performance particle size spectrometer that is compact, low-cost, and portable. The present system consists of four key components: a unipolar mini-discharger for electrically charging particles, an inertial size-separator for classifying charged particles into five size fractions in terms of their aerodynamic sizes, a portable multi-channel electrometer for detecting femto-ampere currents carried by charged particles at each stage, and a retrieval algorithm for converting the current data into a smooth particle size distribution. The unipolar mini-discharger and inertial size separator were quantitatively characterised by using standard polystyrene latex (PSL) particles. The experimentally determined cut-off diameters at each stage in the inertial size separator were 1.17, 0.94, 0.71, 0.54, and 0.23 μm, respectively. Then, the system was compared with a commercial reference aerodynamic particle sizer (APS) in the environment where the number concentration and the average size of TiO2 particles were changing. The present system resolved peak size and geometric standard deviation of particles to within 11.2%, and 6.3%, respectively, indicating that the system can be used to accurately monitor submicron particle size distributions in real time.