Engineering a highly active thermophilic β-glucosidase to enhance its pH stability and saccharification performance

A novel GH3-β-glucosidase from soda lake metagenomic libraries with desirable properties for biomass degradation

Beta-glucosidases catalyze the hydrolysis of the glycosidic bonds of cellobiose, producing glucose, which is a rate-limiting step in cellulose biomass degradation. In industrial processes, β-glucosidases that are tolerant to glucose and stable under harsh industrial reaction conditions are required for efficient cellulose hydrolysis. In this study, we report the molecular cloning, Escherichia coli expression, and functional characterization of a β-glucosidase from the gene, CelGH3_f17, identified from metagenomics libraries of an Ethiopian soda lake. The CelGH3_f17 gene sequence contains a glycoside hydrolase family 3 catalytic domain (GH3). The heterologous expressed and purified enzyme exhibited optimal activity at 50 °C and pH 8.5. In addition, supplementation of 1 M salt and 300 mM glucose enhanced the β-glucosidase activity. Most of the metal ions and organic solvents tested did not affect the β-glucosidase activity. However, Cu2+ and Mn2+ ions, Mercaptoethanol and Triton X-100 reduce the activity of the enzyme. The studied β-glucosidase enzyme has multiple industrially desirable properties including thermostability, and alkaline, salt, and glucose tolerance.

Characterization of a thermophilic and glucose-tolerant GH1 β-glucosidase from hot springs and its prospective application in corn stover degradation

Introduction

β-Glucosidase serves as the pivotal rate-limiting enzyme in the cellulose degradation process, facilitating the hydrolysis of cellobiose and cellooligosaccharides into glucose. However, the widespread application of numerous β-glucosidases is hindered by their limited thermostability and low glucose tolerance, particularly in elevated-temperature and high-glucose environments.

Methods

This study presents an analysis of a β-glucosidase gene belonging to the GH1 family, denoted lqbg8, which was isolated from the metagenomic repository of Hehua hot spring located in Tengchong, China. Subsequently, the gene was cloned and heterologously expressed in Escherichia coli BL21(DE3). Post expression, the recombinant β-glucosidase (LQBG8) underwent purification through a Ni affinity chromatography column, thereby enabling the in-depth exploration of its enzymatic properties.

Results

LQBG8 had an optimal temperature of 70°C and an optimum pH of 5.6. LQBG8 retained 100 and 70% of its maximum activity after 2-h incubation periods at 65°C and 70°C, respectively. Moreover, even following exposure to pH ranges of 3.0-10.0 for 24 h, LQBG8 retained approximately 80% of its initial activity. Notably, the enzymatic prowess of LQBG8 remained substantial at glucose concentrations of up to 3 M, with a retention of over 60% relative activity. The kinetic parameters of LQBG8 were characterized using cellobiose as substrate, with Km and Vmax values of 28 ± 1.9 mg/mL and 55 ± 3.2 μmol/min/mg, respectively. Furthermore, the introduction of LQBG8 (at a concentration of 0.03 mg/mL) into a conventional cellulase reaction system led to an impressive 43.7% augmentation in glucose yield from corn stover over a 24-h period. Molecular dynamics simulations offered valuable insights into LQBG8's thermophilic nature, attributing its robust stability to reduced fluctuations, conformational changes, and heightened structural rigidity in comparison to mesophilic β-glucosidases.

Discussion

In summation, its thermophilic, thermostable, and glucose-tolerant attributes, render LQBG8 ripe for potential applications across diverse domains encompassing food, feed, and the production of lignocellulosic ethanol.

Acid-resistant enzymes: the acquisition strategies and applications

Enzymes have promising applications in chemicals, food, pharmaceuticals, and other variety products because of their high efficiency, specificity, and environmentally friendly properties. However, due to the complexity of raw materials, pH, temperature, solvents, etc., the application range of enzymes is greatly limited in the industry. Protein engineering and enzyme immobilization are classical strategies to overcome the limitations of industrial applications. Although the pH tendency of enzymes has been extensively researched, the mechanism underlying enzyme acid resistance is unclear, and a less practical strategy for altering the pH propensity of enzymes has been suggested. This review proposes that the optimum pH of enzyme is determined by the pKa values of active center ionizable amino acid residues. Three levels of acquiring acid-resistant enzymes are summarized: mining from extreme environments and enzyme databases, modification with protein engineering and enzyme microenvironment engineering, and de novo synthesis. The industrial applications of acid-resistant enzymes in chemicals, food, and pharmaceuticals are also summarized. KEY POINTS: • The mechanism of enzyme acid resistance is fundamentally determined. • The three aspects of the method for acquiring acid-resistant enzymes are summarized. • Computer-aided strategies and artificial intelligence are used to obtain acid-resistant enzymes.

Engineering All-Round Cellulase for Bioethanol Production

One strategy to decrease both the consumption of crude oil and environmental damage is through the production of bioethanol from biomass. Cellulolytic enzyme stability and enzymatic hydrolysis play important roles in the bioethanol process. However, the gradually increased ethanol concentration often reduces enzyme activity and leads to inactivation, thereby limiting the final ethanol yield. Herein, we employed an optimized Two-Gene Recombination Process (2GenReP) approach to evolve the exemplary cellulase CBHI for practical bioethanol fermentation. Two all-round CBHI variants (named as R2 and R4) were obtained with simultaneously improved ethanol resistance, organic solvent inhibitor tolerance, and enzymolysis stability in simultaneous saccharification and fermentation (SSF). Notably, CBHI R4 had a 7.0- to 34.5-fold enhanced catalytic efficiency (kcat/KM) in the presence/absence of ethanol. Employing the evolved CBHI R2 and R4 in the 1G bioethanol process resulted in up to 10.27% (6.7 g/L) improved ethanol yield (ethanol concentration) than non-cellulase, which was far more beyond than other optimization strategies. Besides bioenergy fields, this transferable protein engineering routine holds the potential to generate all-round enzymes that meet the requirement in biotransformation and bioenergy fields.

Expression of β-Glucosidases from the Yak Rumen in Lactic Acid Bacteria: A Genetic Engineering Approach

β-glucosidase derived from microorganisms has wide industrial applications. In order to generate genetically engineered bacteria with high-efficiency β-glucosidase, in this study two subunits (bglA and bglB) of β-glucosidase obtained from the yak rumen were expressed as independent proteins and fused proteins in lactic acid bacteria (Lactobacillus lactis NZ9000). The engineered strains L. lactis NZ9000/pMG36e-usp45-bglA, L. lactis NZ9000/pMG36e-usp45-bglB, and L. lactis NZ9000/pMG36e-usp45-bglA-usp45-bglB were successfully constructed. These bacteria showed the secretory expression of BglA, BglB, and Bgl, respectively. The molecular weights of BglA, BglB, and Bgl were about 55 kDa, 55 kDa, and 75 kDa, respectively. The enzyme activity of Bgl was significantly higher (p < 0.05) than that of BglA and BglB for substrates such as regenerated amorphous cellulose (RAC), sodium carboxymethyl cellulose (CMC-Na), desiccated cotton, microcrystalline cellulose, filter paper, and 1% salicin. Moreover, 1% salicin appeared to be the most suitable substrate for these three recombinant proteins. The optimum reaction temperatures and pH values for these three recombinant enzymes were 50 °C and 7.0, respectively. In subsequent studies using 1% salicin as the substrate, the enzymatic activities of BglA, BglB, and Bgl were found to be 2.09 U/mL, 2.36 U/mL, and 9.4 U/mL, respectively. The enzyme kinetic parameters (Vmax, Km, Kcat, and Kcat/Km) of the three recombinant strains were analyzed using 1% salicin as the substrate at 50 °C and pH 7.0, respectively. Under conditions of increased K⁺ and Fe²⁺ concentrations, the Bgl enzyme activity was significantly higher (p < 0.05) than the BglA and BglB enzyme activity. However, under conditions of increased Zn²⁺, Hg²⁺, and Tween20 concentrations, the Bgl enzyme activity was significantly lower (p < 0.05) than the BglA and BglB enzyme activity. Overall, the engineered lactic acid bacteria strains generated in this study could efficiently hydrolyze cellulose, laying the foundation for the industrial application of β-glucosidase.

Characterization of a New Glucose-Tolerant GH1 β-Glycosidase from Aspergillus fumigatus with Transglycosylation Activity

Concern over environmental impacts has spurred many efforts to replace fossil fuels with biofuels such as ethanol. However, for this to be possible, it is necessary to invest in other production technologies, such as second generation (2G) ethanol, in order to raise the levels of this product and meet the growing demand. Currently, this type of production is not yet economically feasible, due to the high costs of the enzyme cocktails used in saccharification stage of lignocellulosic biomass. In order to optimize these cocktails, the search for enzymes with superior activities has been the goal of several research groups. For this end, we have characterized the new β-glycosidase AfBgl1.3 from A. fumigatus after expression and purification in Pichia pastoris X-33. Structural analysis by circular dichroism revealed that increasing temperature destructured the enzyme; the apparent T_m value was 48.5 °C. The percentages of α-helix (36.3%) and β-sheet (12.4%) secondary structures at 25 °C were predicted. Biochemical characterization suggested that the optimal conditions for AfBgl1.3 were pH 6.0 and temperature of 40 °C. At 30 and 40 °C, the enzyme was stable and retained about 90% and 50% of its activity, respectively, after pre-incubation for 24 h. In addition, the enzyme was highly stable at pH between 5 and 8, retaining over 65% of its activity after pre-incubation for 48 h. AfBgl1.3 co-stimulation with 50-250 mM glucose enhanced its specific activity by 1.4-fold and revealed its high tolerance to glucose (IC₅₀ = 2042 mM). The enzyme was active toward the substrates salicin (495.0 ± 49.0 U mg^-1), pNPG (340.5 ± 18.6 U mg^-1), cellobiose (89.3 ± 5.1 U mg^-1), and lactose (45.1 ± 0.5 U mg^-1), so it had broad specificity. The V_max values were 656.0 ± 17.5, 706.5 ± 23.8, and 132.6 ± 7.1 U mg^-1 toward p-nitrophenyl-β-D-glucopyranoside (pNPG), D-(-)-salicin, and cellobiose, respectively. AfBgl1.3 displayed transglycosylation activity, forming cellotriose from cellobiose. The addition of AfBgl1.3 as a supplement at 0.9 FPU/g of cocktail Celluclast^® 1.5L increased carboxymethyl cellulose (CMC) conversion to reducing sugars (g L^-1) by about 26% after 12 h. Moreover, AfBgl1.3 acted synergistically with other Aspergillus fumigatus cellulases already characterized by our research group-CMC and sugarcane delignified bagasse were degraded, releasing more reducing sugars compared to the control. These results are important in the search for new cellulases and in the optimization of enzyme cocktails for saccharification.

A novel sucrose-inducible expression system and its application for production of biomass-degrading enzymes in Aspergillus niger

BACKGROUND

Filamentous fungi are extensively exploited as important enzyme producers due to the superior secretory capability. However, the complexity of their secretomes greatly impairs the titer and purity of heterologous enzymes. Meanwhile, high-efficient evaluation and production of bulk enzymes, such as biomass-degrading enzymes, necessitate constructing powerful expression systems for bio-refinery applications.

RESULTS

A novel sucrose-inducible expression system based on the host strain Aspergillus niger ATCC 20611 and the β-fructofuranosidase promoter (PfopA) was constructed. A. niger ATCC 20611 preferentially utilized sucrose for rapid growth and β-fructofuranosidase production. Its secretory background was relatively clean because β-fructofuranosidase, the key enzyme responsible for sucrose utilization, was essentially not secreted into the medium and the extracellular protease activity was low. Furthermore, the PfopA promoter showed a sucrose concentration-dependent induction pattern and was not subject to glucose repression. Moreover, the strength of PfopA was 7.68-fold higher than that of the commonly used glyceraldehyde-3-phosphate dehydrogenase promoter (PgpdA) with enhanced green fluorescence protein (EGFP) as a reporter. Thus, A. niger ATCC 20611 coupled with the PfopA promoter was used as an expression system to express a β-glucosidase gene (bgla) from A. niger C112, allowing the production of β-glucosidase at a titer of 17.84 U/mL. The crude β-glucosidase preparation could remarkably improve glucose yield in the saccharification of pretreated corncob residues when added to the cellulase mixture of Trichoderma reesei QM9414. The efficacy of this expression system was further demonstrated by co-expressing the T. reesei-derived chitinase Chi46 and β-N-acetylglucosaminidase Nag1 to obtain an efficient chitin-degrading enzyme cocktail, which could achieve the production of N-acetyl-D-glucosamine from colloidal chitin with a conversion ratio of 91.83%. Besides, the purity of the above-secreted biomass-degrading enzymes in the crude culture supernatant was over 86%.

CONCLUSIONS

This PfopA-driven expression system expands the genetic toolbox of A. niger and broadens the application field of the traditional fructo-oligosaccharides-producing strain A. niger ATCC 20611, advancing it to become a high-performing enzyme-producing cell factory. In particular, the sucrose-inducible expression system possessed the capacity to produce biomass-degrading enzymes at a high level and evade endogenous protein interference, providing a potential purification-free enzyme production platform for bio-refinery applications.

Strategies for tailoring pH performances of glycoside hydrolases

Glycoside hydrolases (GHs) exhibit high activity and stability under harsh conditions, such as high temperatures and extreme pHs, given their wide use in industrial biotechnology. However, strategies for improving the acidophilic and alkalophilic adaptations of GHs are poorly summarized due to the complexity of the mechanisms of these adaptations. This review not only highlights the adaptation mechanisms of acidophilic and alkalophilic GHs under extreme pH conditions, but also summarizes the recent advances in engineering the pH performances of GHs with a focus on four strategies of protein engineering, enzyme immobilization, chemical modification, and medium engineering (additives). The examples described here summarize the methods used in modulating the pH performances of GHs and indicate that methods integrated in different protein engineering techniques or methods are efficient to generate industrial biocatalysts with the desired pH performance and other adapted enzyme properties.

Engineering cellulases for conversion of lignocellulosic biomass

Lignocellulosic biomass is a renewable source of energy, chemicals and materials. Many applications of this resource require the depolymerization of one or more of its polymeric constituents. Efficient enzymatic depolymerization of cellulose to glucose by cellulases and accessory enzymes such as lytic polysaccharide monooxygenases is a prerequisite for economically viable exploitation of this biomass. Microbes produce a remarkably diverse range of cellulases, which consist of glycoside hydrolase (GH) catalytic domains and, although not in all cases, substrate-binding carbohydrate-binding modules (CBMs). As enzymes are a considerable cost factor, there is great interest in finding or engineering improved and robust cellulases, with higher activity and stability, easy expression, and minimal product inhibition. This review addresses relevant engineering targets for cellulases, discusses a few notable cellulase engineering studies of the past decades and provides an overview of recent work in the field.

Biochemical characterization of a novel glucose-tolerant GH3 β-glucosidase (Bgl1973) from Leifsonia sp. ZF2019

Beta-glucosidase (Bgl) is an enzyme with considerable food, beverage, and biofuel processing potential. However, as many Bgls are inhibited by their reaction end product glucose, their industrial applications are greatly limited. In this study, a novel Bgl gene (Bgl1973) was cloned from Leifsonia sp. ZF2019 and heterologously expressed in E. coli. Sequence analysis and structure modeling revealed that Bgl1973 was 748 aa, giving it a molecular weight of 78 kDa, and it showed high similarity with the glycoside hydrolase 3 (GH3) family Bgls with which its active site residues were conserved. By using pNPGlc (p-nitrophenyl-β-D-glucopyranoside) as substrate, the optimum temperature and pH of Bgl1973 were shown to be 50 °C and 7.0, respectively. Bgl1973 was insensitive to most metal ions (12.5 mM), 1% urea, and even 0.1% Tween-80. This enzyme maintained 60% of its original activity in the presence of 20% NaCl, demonstrating its excellent salt tolerance. Furthermore, it still had 83% residual activity in 1 M of glucose, displaying its outstanding glucose tolerance. The K_m, V_max, and k_cat of Bgl1973 were 0.22 mM, 44.44 μmol/min mg, and 57.78 s^-1, respectively. Bgl1973 had a high specific activity for pNPGlc (19.10 ± 0.59 U/mg) and salicin (20.43 ± 0.92 U/mg). Furthermore, molecular docking indicated that the glucose binding location and the narrow and deep active channel geometry might contribute to the glucose tolerance of Bgl1973. Our results lay a foundation for the studying of this glucose-tolerant β-glucosidase and its applications in many industrial settings. KEY POINTS: • A novel β-glucosidase from GH3 was obtained from Leifsonia sp. ZF2019. • Bgl1973 demonstrated excellent glucose tolerance. • The glucose tolerance of Bgl1973 was explained using molecular docking analysis.

Improved Production of Streptomyces sp. FA1 Xylanase in a Dual-Plasmid Pichia pastoris System

Methanol is considered as a potential hazard in the methanol-induced yeast expression of food-related enzymes. To increase the production efficiency of recombinant proteins in Pichia&nbsp;pastoris without methanol induction, a novel dual-plasmid system was constructed, for the first time, by a combining the strategies of genomic integration and episomal expression. To obtain a high copy number of the target gene, the autonomously replicating sequence derived from Kluyveromyces lactis (PARS) was used to construct episomal vectors carrying the constitutive promoters P_GAP and P_GCW14. In addition, an integrative vector carrying the P_GCW14 promoter was constructed by replacing the P_GAP promoter sequence with a partial P_GCW14 promoter. Next, using xylanase XynA from Streptomyces sp. FA1 as the model enzyme, recombination strains were transformed with different combinations of integrating and episomal vectors that were constructed to investigate the changes in the protein yield. Results in shake flasks indicated that the highest enzyme yield was achieved when integrated P_GAP and episomal P_GCW14 were simultaneously transformed into the host strain. Meanwhile, the copy number of xynA increased from 1.14 ± 0.46 to 3.06 ± 0.35. The yield of XynA was successfully increased to 3925 U·mL^-1 after 102 h of fermentation in a 3.6 L fermenter, which was 16.7-fold and 2.86-fold of the yields that were previously reported for the constitutive expression and methanol-induced expression of the identical protein, respectively. Furthermore, the high-cell-density fermentation period was shortened from 132 h to 102 h compared to that of methanol-induced system. Since the risk of methanol toxicity is removed, this novel expression system would be suitable for the production of proteins related to the food and pharmaceutical industries.

Improving the Substrate Affinity and Catalytic Efficiency of β-Glucosidase Bgl3A from Talaromyces leycettanus JCM12802 by Rational Design

Improving the substrate affinity and catalytic efficiency of β-glucosidase is necessary for better performance in the enzymatic saccharification of cellulosic biomass because of its ability to prevent cellobiose inhibition on cellulases. Bgl3A from Talaromyces leycettanus JCM12802, identified in our previous work, was considered a suitable candidate enzyme for efficient cellulose saccharification with higher catalytic efficiency on the natural substrate cellobiose compared with other β-glucosidase but showed insufficient substrate affinity. In this work, hydrophobic stacking interaction and hydrogen-bonding networks in the active center of Bgl3A were analyzed and rationally designed to strengthen substrate binding. Three vital residues, Met36, Phe66, and Glu168, which were supposed to influence substrate binding by stabilizing adjacent binding site, were chosen for mutagenesis. The results indicated that strengthening the hydrophobic interaction between stacking aromatic residue and the substrate, and stabilizing the hydrogen-bonding networks in the binding pocket could contribute to the stabilized substrate combination. Four dominant mutants, M36E, M36N, F66Y, and E168Q with significantly lower K_m values and 1.4–2.3-fold catalytic efficiencies, were obtained. These findings may provide a valuable reference for the design of other β-glucosidases and even glycoside hydrolases.

Loop engineering of a thermostable GH10 xylanase to improve low-temperature catalytic performance for better synergistic biomass-degrading abilities

Lignocellulosic biorefining for producing biofuels poses technical challenges. It is usually conducted over a long time using heat, making it energy intensive. In this study, we lowered the energy consumption of this process through an optimized enzyme and pretreatment strategy. First, the dominant mutant M137E/N269G of Bispora sp. MEY-1XYL10C_ΔN was obtained by directed evolution with highcatalytic efficiency (970 mL/s∙mg)and specific activity (2090 U/mg)at 37 °C, and thermostability was improved (T₅₀ increased by5 °C). After pretreatment with seawater immersionfollowing steam explosion,bagasse was co-treated with cellulase and M137E/N269G under mild conditions (37 °C), the resulting highest yield of fermentable sugars reached 219 µmol/g of bagasse,46% higher than that of the non-seawater treatment group, with the highest degree of synergy of 2.0. Pretreatment with seawater following steam explosion and synergistic hydrolysis through high activity xylanase and cellulase helped to achieve low energy degradation of lignocellulosic biomass.

Understanding the Basis of Occurrence, Biosynthesis, and Implications of Thermostable Alkaline Proteases

The group of hydrolytic enzymes synonymously known as proteases is predominantly most favored for the class of industrial enzymes. The present work focuses on the thermostable nature of these proteolytic enzymes that occur naturally among mesophilic and thermophilic microbes. The broad thermo-active feature (40-80 °C), ease of cultivation, maintenance, and bulk production are the key features associated with these enzymes. Detailing of contemporary production technologies, and controllable operational parameters including the purification strategies, are the key features that justify their industrial dominance as biocatalysts. In addition, the rigorous research inputs by protein engineering and enzyme immobilization studies add up to the thermo-catalytic features and application capabilities of these enzymes. The work summarizes key features of microbial proteases that make them numero-uno for laundry, biomaterials, waste management, food and feed, tannery, and medical as well as pharmaceutical industries. The quest for novel and/or designed and engineered thermostable protease from unexplored sources is highly stimulating and will address the ever-increasing industrial demands.

Unconventional β-Glucosidases: A Promising Biocatalyst for Industrial Biotechnology

β-Glucosidases primarily catalyze removal of terminal glucosyl residues from a variety of glucoconjugates and also perform transglycosylation and reverse hydrolysis. These catalytic properties can be readily exploited for degradation of lignocellulosic biomass as well as for pharmaceutical, food and flavor industries. β-Glucosidases have been either isolated in the native form from the producer organism or recombinantly expressed and gaged for their biochemical properties and substrate specificities. Although almond and Aspergillus niger have been instantly recognizable sources of β-glucosidases utilized for various applications, an intricate pool of novel β-glucosidases from different sources can provide their potent replacements. Moreover, one can envisage the better efficacy of these novel candidates in biofuel and biorefinery industries facilitating efficient degradation of biomass. This article reviews properties of the novel β-glucosidases such as glucose tolerance and activation, substrate specificity, and thermostability which can be useful for their applications in lignocellulose degradation, food industry, and pharmaceutical industry in comparison with the β-glucosidases from the conventional sources. Such β-glucosidases have potential for encouraging white biotechnology.

A Swollenin From Talaromyces leycettanus JCM12802 Enhances Cellulase Hydrolysis Toward Various Substrates

Swollenins exist within some fungal species and are candidate accessory proteins for the biodegradation of cellulosic substrates. Here, we describe the identification of a swollenin gene, Tlswo, in Talaromyces leycettanus JCM12802. Tlswo was successfully expressed in both Trichoderma reesei and Pichia pastoris. Assay results indicate that TlSWO is capable of releasing reducing sugars from lichenan, barley β-glucan, carboxymethyl cellulose sodium (CMC-Na) and laminarin. The specific activity of TlSWO toward lichenan, barley β-glucan, carboxymethyl cellulose sodium (CMC-Na) and laminarin is 9.0 ± 0.100, 8.9 ± 0.100, 2.3 ± 0.002 and 0.79 ± 0.002 U/mg, respectively. Additionally, TlSWO had disruptive activity on Avicel and a synergistic effect with cellobiohydrolases, increasing the activity on pretreated corn stover by up to 72.2%. The functional diversity of TlSWO broadens its applicability in experimental settings, and indicating that it may be a promising candidate for future industrial applications.

Molecular modeling, docking and simulation dynamics of β-glucosidase reveals high-efficiency, thermo-stable, glucose tolerant enzyme in Paenibacillus lautus BHU3 strain

The enzyme β-glucosidase mediates the rate limiting step of conversion of cellobiose to glucose and thus plays a vital role in the process of cellulose degradation. The present study deals with analysis of the effective novel strain of Paenibacillus lautus BHU3 for identifying high-efficiency thermostable, glucose tolerant β-glucosidases. Seven counterparts with elevated T_m values ranging from 64.6 to 75.8 °C with high thermo-stability, were revealed through this analysis. The blind molecular docking of the model enzymes structures with cellobiose and pNPG gave high negative interaction energies ranging from -11.33 to -13.29 and -6.43 to -9.054 (kcal mol^-1), respectively. The enzyme WP_096774744.1 effectively formed 5 hydrogen bonds with the highest interaction energy (-13.29 kcal mol^-1) with cellobiose at its catalytic site. Molecular dynamics simulation analysis performed for the WP_096774744.1-pNPG complex predicted Glu5, Arg7, Lue68, Gly69 and Phe325 as the major contributing residues for accomplishing hydrolysis of β-1-4-linkage. Further, the molecular docking of WP_096774744.1 enzyme with glucose revealed a distinct glucose-binding site distant from the substrate-binding site, thus confirming the deficient competitive inhibition by glucose. Hence, WP_096774744.1 β-glucosidase appears to be an efficient enzyme with enhanced activity to biodegrade the cellulosic materials and highly relevant for waste management and various industrial applications.

Enzyme kinetics and inhibition parameters of human leukocyte glucosylceramidase

Glucosylceramidase (GCase) is a lysosomal enzyme that catalyzes the cleavage of β-glucosidic linkage of glucocerebroside (GC) into glucose and ceramide; thereby, plays an essential function in the degradation of complex lipids and the turnover of cellular membranes. The growing list of 460 mutations in the gene coding for it-glucosylceramidase beta acid 1 (GBA1)-is reported to abolish its catalytic activity and decrease its enzyme stability, associating it with severe health conditions such as Gaucher disease (GD), Parkinson Disease (PD) and Dementia with Lewy bodies (DLB). Although the three-dimensional structure of wild type glucosylceramidase is elucidated, little is known about its features in human cells. Moreover, alternative sources of GCase that prove to be effective in the treatment of diseases with enzyme treatment therapies, impose the need for a simple and cost-effective procedure to study the enzyme behavior. This work, for the first time, shows a well-established, yet simple, cost- and time-efficient protocol for the study of GCase enzyme in human leukocytes by the artificial substrate p-Nitrophenyl-β-D-glucopyranoside (PNPG). Characterization of the enzyme in human leukocytes for activation parameters (optimal pH, Km, and Vmax) and enzyme inhibition was done. The results indicate that the optimum pH of GCase enzyme with PNPG is 5.0. The Km and Vmax values are 12.6mM and 333 U/mg, respectively. Gluconolactone competitively inhibits GCase, with a Ki value of 0.023 mM and IC50 of 0.047 mM. Glucose inhibition is uncompetitive with a Ki of 1.94 mM and IC50 of 55.3 mM. This is the first report for the inhibitory effect of glucose, δ-gluconolactone on human leukocyte GCase activity.

One-step purification of two novel thermotolerant β-1,4-glucosidases from a newly isolated strain of Fusarium chlamydosporum HML278 and their characterization

A newly identified cellulase-producing Fusarium chlamydosporum HML278 was cultivated under solid-state fermentation of sugarcane bagasse, and two new β-glucosides enzymes (BG FH1, BG FH2) were recovered from fermentation solution by modified non-denaturing active gel electrophoresis and gel filtration chromatography. SDS-PAGE analysis showed that the molecular weight of BG FH1 and BG FH2 was 93 kDa and 52 kDa, respectively, and the enzyme activity was 5.6 U/mg and 11.5 U/mg, respectively. The optimal reaction temperature of the enzymes was 60 ℃, and the enzymes were stable with a temperature lower than 70 ℃. The optimal pH of the purified enzymes was 6.0, and the enzymes were stable between pH 4–10. K_m and V_max values ​​were 2.76 mg/mL and 20.6 U/mg for pNPG, respectively. Thin-layer chromatography and high-performance liquid chromatography analysis showed that BG FH1and BG FH2 had hydrolysis activity toward cellobiose and could hydrolyze cellobiose into glucose. In addition, both enzymes exhibited transglycoside activity, which could use glucose to synthesize cellobiose and cellotriose, and preferentially synthesize alcohol. In conclusion, our study demonstrated that F. chlamydosporum HML278 produces heat-resistant β-glucosidases with both hydrolytic activity and transglycosidic activity, and these β-glucosidases have potential application in bioethanol and papermaking industries.

A Novel High Glucose-Tolerant β-Glucosidase: Targeted Computational Approach for Metagenomic Screening

The rate-limiting component of cellulase for efficient degradation of lignocellulosic biomass through the enzymatic route depends on glucosidase’s sensitivity to the end product (glucose). Therefore, there is still a keen interest in finding glucose-tolerant β-glucosidase (BGL) that is active at high glucose concentrations. The main objective of this study was to identify, isolate, and characterize novel highly glucose-tolerant and halotolerant β-glucosidase gene (PersiBGL1) from the mixed genome DNA of sheep rumen metagenome as a suitable environment for efficient cellulase by computationally guided experiments instead of costly functional screening. At first, an in silico screening approach was utilized to find primary candidate enzymes with superior properties. The structure-dependent mechanism of glucose tolerance was investigated for candidate enzymes. Among the computationally selected candidates, PersiBGL1 was cloned, isolated, and structurally characterized, which achieved very high activity in relatively high temperatures and alkaline pH and was successfully used for the hydrolysis of cellobiose. This enzyme exhibits a very high glucose tolerance, with the highest inhibition constant K_i (8.8 M) among BGLs reported so far and retained 75% of its initial activity in the presence of 10 M glucose. Furthermore, a group of multivalent metal, including Mg²⁺, Mn²⁺, and Ca²⁺, as a cofactor, could improve the catalytic efficiency of PersiBGL1. Our results demonstrated the power of computational selected candidates to discover novel glucose tolerance BGL, effective for the bioconversion of lignocellulosic biomass.

Thermotolerant glycosyl hydrolases-producing Bacillus aerius CMCPS1 and its saccharification efficiency on HCR-laccase (LccH)-pretreated corncob biomass

BACKGROUND

The current production of bioethanol based on lignocellulosic biomass (LCB) highly depends on thermostable enzymes and extremophiles owing to less risk of contamination. Thermophilic bacterial cellulases are preferred over fungi due to their higher growth rate, presence of complex multi-enzymes, stability, and enhanced bioconversion efficiency. Corncob, underutilized biomass, ensures energy conservation due to high lignocellulosic and more fermentable sugar content. In the present study, the thermophilic bacterium Bacillus aerius CMCPS1, isolated from the thermal springs of Manikaran, Himachal Pradesh, India, was characterized in terms of its activity, stability, and hydrolytic capacity. A two-step process comprising: (i) a combined strategy of hydrodynamic cavitation reaction (HCR)-coupled enzymatic (LccH at 6.5 U) pretreatment for delignification and (ii) subsequent hydrolysis of pre-treated (HCR-LccH) corncob biomass (CCB) using a thermostable cocktail of CMCPS1 was adopted to validate the efficiency of the process. Some of the parameters studied include lignin reduction, cellulose increase, and saccharification efficiency.

RESULT

Among the five isolates obtained by in situ enrichment on various substrates, B. aerius CMCPS1, isolated from hot springs, exhibited the maximum hydrolytic activity of 4.11. The GH activity of the CMCPS1 strain under submerged fermentation revealed maximum filter paper activity (FPA) and endoglucanase activity of 4.36 IU mL-1 and 2.98 IU mL-1, respectively, at 44 h. Similarly, the isolate produced exoglucanase and β-glucosidase with an activity of 1.76 IU mL-1 and 1.23 IU mL-1 at 48 h, respectively. More specifically, the enzyme endo-1,4-β-d glucanase E.C.3.2.1.4 (CMCase) produced by B. aerius CMCPS1 displayed wider stability to pH (3-9) and temperature (30-90 °C) than most fungal cellulases. Similarly, the activity of CMCase increased in the presence of organic solvents (118% at 30% acetone v/v). The partially purified CMCase from the culture supernatant of CMCPS1 registered 64% yield with twofold purification. The zymogram and SDS-PAGE analyses further confirmed the CMCase activity with an apparent molecular mass of 70 kDa. The presence of genes specific to cellulases, such as cellulose-binding domain CelB, confirmed the presence of GH family 46 and β-glucosidase activity (GH3). The multifunctional cellulases of CMCPS1 were evaluated for their saccharification efficiency on laccase (LccH, a fungal laccase from Hexagonia hirta MSF2)-pretreated corncob in a HCR. The lignin and hemicelluloses removal efficiency of HCR-LccH was 54.1 and 6.57%, respectively, with an increase in cellulose fraction (42.25%). The saccharification efficiency of 55% was achieved with CMCPS1 multifunctional cellulases at 50 °C and pH 5.0.

CONCLUSION

The multifunctional cellulase complex of B. aerius CMCPS1 is a potential biocatalyst for application in lignocellulosic biomass-based biorefineries. The saccharification ability of HCR-LccH-pretreated corncob at elevated temperatures would be an advantage for biofuel production from lignocellulosic biomass.

Progress in Ameliorating Beneficial Characteristics of Microbial Cellulases by Genetic Engineering Approaches for Cellulose Saccharification

Lignocellulosic biomass is a renewable and sustainable energy source. Cellulases are the enzymes that cleave β-1, 4-glycosidic linkages in cellulose to liberate sugars that can be fermented to ethanol, butanol, and other products. Low enzyme activity and yield, and thermostability are, however, some of the limitations posing hurdles in saccharification of lignocellulosic residues. Recent advancements in synthetic and systems biology have generated immense interest in metabolic and genetic engineering that has led to the development of sustainable technology for saccharification of lignocellulosics in the last couple of decades. There have been several attempts in applying genetic engineering in the production of a repertoire of cellulases at a low cost with a high biomass saccharification. A diverse range of cellulases are produced by different microbes, some of which are being engineered to evolve robust cellulases. This review summarizes various successful genetic engineering strategies employed for improving cellulase kinetics and cellulolytic efficiency.

A glucotolerant β-glucosidase from the fungus Talaromyces amestolkiae and its conversion into a glycosynthase for glycosylation of phenolic compounds

Background

The interest for finding novel β-glucosidases that can improve the yields to produce second-generation (2G) biofuels is still very high. One of the most desired features for these enzymes is glucose tolerance, which enables their optimal activity under high-glucose concentrations. Besides, there is an additional focus of attention on finding novel enzymatic alternatives for glycoside synthesis, for which a mutated version of glycosidases, named glycosynthases, has gained much interest in recent years.

Results

In this work, a glucotolerant β-glucosidase (BGL-1) from the ascomycete fungus Talaromyces amestolkiae has been heterologously expressed in Pichia pastoris, purified, and characterized. The enzyme showed good efficiency on p-nitrophenyl glucopyranoside (pNPG) (K_m= 3.36 ± 0.7 mM, k_cat= 898.31 s⁻¹), but its activity on cellooligosaccharides, the natural substrates of these enzymes, was much lower, which could limit its exploitation in lignocellulose degradation applications. Interestingly, when examining the substrate specificity of BGL-1, it showed to be more active on sophorose, the β-1,2 disaccharide of glucose, than on cellobiose. Besides, the transglycosylation profile of BGL-1 was examined, and, for expanding its synthetic capacities, it was converted into a glycosynthase. The mutant enzyme, named BGL-1-E521G, was able to use α-d-glucosyl-fluoride as donor in glycosylation reactions, and synthesized glucosylated derivatives of different pNP-sugars in a regioselective manner, as well as of some phenolic compounds of industrial interest, such as epigallocatechin gallate (EGCG).

Conclusions

In this work, we report the characterization of a novel glucotolerant 1,2-β-glucosidase, which also has a considerable activity on 1,4-β-glucosyl bonds, that has been cloned in P. pastoris, produced, purified and characterized. In addition, the enzyme was converted into an efficient glycosynthase, able to transfer glucose molecules to a diversity of acceptors for obtaining compounds of interest. The remarkable capacities of BGL-1 and its glycosynthase mutant, both in hydrolysis and synthesis, suggest that it could be an interesting tool for biotechnological applications.

Enhanced Biomass Yield of and Saccharification in Transgenic Tobacco Over-Expressing β-Glucosidase

Here, we report an increase in biomass yield and saccharification in transgenic tobacco plants (Nicotiana tabacumL.) overexpressing thermostable β-glucosidase from Thermotoga maritima, BglB, targeted to the chloroplasts and vacuoles. The transgenic tobacco plants showed phenotypic characteristics that were significantly different from those of the wild-type plants. The biomass yield and life cycle (from germination to flowering and harvest) of the transgenic tobacco plants overexpressing BglB were 52% higher and 36% shorter than those of the wild-type tobacco plants, respectively, indicating a change in the genome transcription levels in the transgenic tobacco plants. Saccharification in biomass samples from the transgenic tobacco plants was 92% higher than that in biomass samples from the wild-type tobacco plants. The transgenic tobacco plants required a total investment (US$/year) corresponding to 52.9% of that required for the wild-type tobacco plants, but the total biomass yield (kg/year) of the transgenic tobacco plants was 43% higher than that of the wild-type tobacco plants. This approach could be applied to other plants to increase biomass yields and overproduce β-glucosidase for lignocellulose conversion.

Engineering of β-Glucosidase Bgl15 with Simultaneously Enhanced Glucose Tolerance and Thermostability To Improve Its Performance in High-Solid Cellulose Hydrolysis

In this study, a Petri-dish-based double-layer high-throughput screening method was established to improve glucose tolerance of β-glucosidase Bgl15. Two beneficial mutations were identified, and the joint mutant 2R1 improved the half-maximal inhibitory concentration of glucose from 0.04 to 2.1 M. The crystal structure of 2R1 was subsequently determined at 2.7 Å. Structure analysis revealed that enhancement of glucose tolerance may be due to improved transglycosylation activity made possible by a hydrophobic binding site for glucose as an acceptor and more stringent control of a putative water channel. To further ameliorate the application potential of the enzyme, it was engineered to increase the half-life at 50 °C from 0.8 h (Bgl15) to 180 h (mutant 5R1). Furthermore, supplementation of 5R1 to the cellulase cocktail significantly improved glucose production from pretreated sugar cane bagasse by 38%. Consequently, this study provided an efficient approach to enhance glucose tolerance and generated a promising catalyst for cellulose saccharification.

Rozhkova A, N. Zorov I, Korotkova O, P. Sinitsyn A, Schwaneberg U, D. Davari M. Engineering Robust Cellulases for Tailored Lignocellulosic Degradation Cocktails

Lignocellulosic biomass is a most promising feedstock in the production of second-generation biofuels. Efficient degradation of lignocellulosic biomass requires a synergistic action of several cellulases and hemicellulases. Cellulases depolymerize cellulose, the main polymer of the lignocellulosic biomass, to its building blocks. The production of cellulase cocktails has been widely explored, however, there are still some main challenges that enzymes need to overcome in order to develop a sustainable production of bioethanol. The main challenges include low activity, product inhibition, and the need to perform fine-tuning of a cellulase cocktail for each type of biomass. Protein engineering and directed evolution are powerful technologies to improve enzyme properties such as increased activity, decreased product inhibition, increased thermal stability, improved performance in non-conventional media, and pH stability, which will lead to a production of more efficient cocktails. In this review, we focus on recent advances in cellulase cocktail production, its current challenges, protein engineering as an efficient strategy to engineer cellulases, and our view on future prospects in the generation of tailored cellulases for biofuel production.

β-Glucosidase BGL1 from Coprinopsis cinerea Exhibits a Distinctive Hydrolysis and Transglycosylation Activity for Application in the Production of 3-O-β-d-Gentiobiosyl-d-laminarioligosaccharides

We previously reported that β-glucosidase BGL1 at low concentration (15 μg mL^-1) from Coprinopsis cinerea exhibited hydrolytic activity only toward laminarioligosaccharides but not toward cellooligosaccharides and gentiobiose. This study shows that BGL1 at high concentration (200 μg mL^-1) also hydrolyzed cellobiose and gentiobiose, which accounted for only 0.83 and 2.05% of its activity toward laminaribiose, respectively. Interestingly, BGL1 at low concentration (1.5 μg mL^-1) showed transglycosylation but BGL1 at high concentration (200 μg mL^-1) did not. BGL1 utilizes only laminarioligosaccharides but not glucose, gentiobiose, and cellobiose to synthesize the higher oligosaccharides. BGL1 transferred one glucosyl residue from substrate laminarioligosaccharide to another laminarioligosaccharide as an acceptor in a β(1 → 3) or β(1 → 6) fashion to produce higher laminarioligosaccharides or 3-O-β-d-gentiobiosyl-d-laminarioligosaccharides. The BGL1-digested laminaritriose exhibited approximately 90% enhancement in the anti-oxidant activity compared to that of untreated laminaritriose, implying a potential application of BGL1-based transglycosylation for the production of high value-added rare oligosaccharides.

The Statistical Optimisation of Recombinant β-glucosidase Production through a Two-Stage, Multi-Model, Design of Experiments Approach

β-glucosidases are a class of enzyme that are widely distributed in the living world, with examples noted in plants, fungi, animals and bacteria. They offer both hydrolysis and synthesis capacity for a wide range of biotechnological processes. However, the availability of native, or the production of recombinant β-glucosidases, is currently a bottleneck in the widespread industrial application of this enzyme. In this present work, the production of recombinant β-glucosidase from Streptomyces griseus was optimised using a Design of Experiments strategy, comprising a two-stage, multi-model design. Three screening models were comparatively employed: Fractional Factorial, Plackett-Burman and Definitive Screening Design. Four variables (temperature, incubation time, tryptone, and OD_{600 nm}) were experimentally identified as having statistically significant effects on the production of S.griseus recombinant β-glucosidase in E. coli BL21 (DE3). The four most influential variables were subsequently used to optimise recombinant β-glucosidase production, employing Central Composite Design under Response Surface Methodology. Optimal levels were identified as: OD_{600 nm}, 0.55; temperature, 26 °C; incubation time, 12 h; and tryptone, 15 g/L. This yielded a 2.62-fold increase in recombinant β-glucosidase production, in comparison to the pre-optimised process. Affinity chromatography resulted in homogeneous, purified β-glucosidase that was characterised in terms of pH stability, metal ion compatibility and kinetic rates for p-nitrophenyl-β-D-glucopyranoside (pNPG) and cellobiose catalysis.

Microbial Beta Glucosidase Enzymes: Recent Advances in Biomass Conversation for Biofuels Application

The biomass to biofuels production process is green, sustainable, and an advanced technique to resolve the current environmental issues generated from fossil fuels. The production of biofuels from biomass is an enzyme mediated process, wherein β-glucosidase (BGL) enzymes play a key role in biomass hydrolysis by producing monomeric sugars from cellulose-based oligosaccharides. However, the production and availability of these enzymes realize their major role to increase the overall production cost of biomass to biofuels production technology. Therefore, the present review is focused on evaluating the production and efficiency of β-glucosidase enzymes in the bioconversion of cellulosic biomass for biofuel production at an industrial scale, providing its mechanism and classification. The application of BGL enzymes in the biomass conversion process has been discussed along with the recent developments and existing issues. Moreover, the production and development of microbial BGL enzymes have been explained in detail, along with the recent advancements made in the field. Finally, current hurdles and future suggestions have been provided for the future developments. This review is likely to set a benchmark in the area of cost effective BGL enzyme production, specifically in the biorefinery area.

Chaetomella raphigera β-glucosidase D2-BGL has intriguing structural features and a high substrate affinity that renders it an efficient cellulase supplement for lignocellulosic biomass hydrolysis

BACKGROUND

To produce second-generation biofuels, enzymatic catalysis is required to convert cellulose from lignocellulosic biomass into fermentable sugars. β-Glucosidases finalize the process by hydrolyzing cellobiose into glucose, so the efficiency of cellulose hydrolysis largely depends on the quantity and quality of these enzymes used during saccharification. Accordingly, to reduce biofuel production costs, new microbial strains are needed that can produce highly efficient enzymes on a large scale.

RESULTS

We heterologously expressed the fungal β-glucosidase D2-BGL from a Taiwanese indigenous fungus Chaetomella raphigera in Pichia pastoris for constitutive production by fermentation. Recombinant D2-BGL presented significantly higher substrate affinity than the commercial β-glucosidase Novozyme 188 (N188; K _m = 0.2 vs 2.14 mM for p-nitrophenyl β-d-glucopyranoside and 0.96 vs 2.38 mM for cellobiose). When combined with RUT-C30 cellulases, it hydrolyzed acid-pretreated lignocellulosic biomasses more efficiently than the commercial cellulase mixture CTec3. The extent of conversion from cellulose to glucose was 83% for sugarcane bagasse and 63% for rice straws. Compared to N188, use of D2-BGL halved the time necessary to produce maximal levels of ethanol by a semi-simultaneous saccharification and fermentation process. We upscaled production of recombinant D2-BGL to 33.6 U/mL within 15 days using a 1-ton bioreactor. Crystal structure analysis revealed that D2-BGL belongs to glycoside hydrolase (GH) family 3. Removing the N-glycosylation N68 or O-glycosylation T431 residues by site-directed mutagenesis negatively affected enzyme production in P. pastoris. The F256 substrate-binding residue in D2-BGL is located in a shorter loop surrounding the active site pocket relative to that of Aspergillus β-glucosidases, and this short loop is responsible for its high substrate affinity toward cellobiose.

CONCLUSIONS

D2-BGL is an efficient supplement for lignocellulosic biomass saccharification, and we upscaled production of this enzyme using a 1-ton bioreactor. Enzyme production could be further improved using optimized fermentation, which could reduce biofuel production costs. Our structure analysis of D2-BGL offers new insights into GH3 β-glucosidases, which will be useful for strain improvements via a structure-based mutagenesis approach.

Multifunctional elastin-like polypeptide renders β-glucosidase enzyme phase transition and high stability

BACKGROUND

In the enzymatic conversion of biomass, it becomes an important issue to efficiently and cost-effectively degrade cellulose into fermentable glucose. β-Glucosidase (Bgluc), an essential member of cellulases, plays a critical role in cellulosic biomass degradation. The difficulty in improving the stability of Bgluc has been a bottleneck in the enzyme-dependent cellulose degradation. The traditional method of protein purification, however, leads to higher production cost and a decrease in activity. To simplify and efficiently purify Bgluc with modified special properties, Bgluc-tagged ELP and His with defined phase transitions was designed to facilitate the process.

RESULTS

Here, a novel binary ELP and His tag was fused with Bgluc from termite Coptotermes formosanus to construct a Bgluc-linker-ELP-His recombinant fusion protein (BglucLEH). The recombinant plasmid Bgluc expressing a His tag (BglucH) was also constructed. The BglucLEH and BglucH were expressed in E. coli BL21 and purified using inverse transition cycling (ITC) or Ni-NTA resin. The optimum salt concentration for the ITC purification of BglucLEH was 0.5 M (NH₄)₂SO₄ and the specific activity of BglucLEH purified by ITC was 75.5 U/mg for substrate p-NPG, which was slightly higher than that of BglucLEH purified by Ni-NTA (68.2 U/mg). The recovery rate and purification fold of BglucLEH purified by ITC and Ni-NTA were 77.8%, 79.1% and 12.60, 11.60, respectively. The results indicated that purification with ITC was superior to the traditional Ni-NTA. The K _m of BglucLEH and BglucH for p-NPG was 5.27 and 5.73 mM, respectively. The K _ca t/K _m (14.79 S^-1 mM^-1) of BglucLEH was higher than that of BglucH (12.10 S^-1 mM^-1). The effects of ELP tag on the enzyme activity, secondary structure and protein stability were also studied. The results showed that ELP tag did not affect the secondary structure or enzyme activity of Bgluc. More importantly, ELP improved the protein stability in harsh conditions such as heating and exposure to denaturant.

CONCLUSION

The Bgluc-linker-ELP-His system shows wide application prospect in maintaining the activity, efficient purification and improving the stability of Bgluc. These properties of BglucLEH make it an interesting tool to reduce cost, to improve the efficiency of biocatalyst and potentially to enhance the degradation of lignocellulosic biomass.

Glucose tolerant and glucose stimulated β-glucosidases - A review

The β-glucosidases (β-D-glucoside glucohydrolase, EC 3.2.1.21) hydrolyze glycosidic bonds of alkyl-, amino-, or aryl-β-D-glucosides, cyanogenic glucosides, disaccharides and short oligosaccharides and can also catalyze the synthesis of glycosyl-bonds between different molecules via transglycosylation. Due to their ubiquitous phylogenetic distribution, substrate diversity and ability to both hydrolyze and synthesize glycosidic bonds, the catalysis and regulation of β-glucosidases have been extensively studied. Many β-glucosidases are inhibited by the reaction product glucose, and reduced catalytic activity may limit the biotechnological and industrial applications of these enzymes and this has stimulated the search for β-glucosidases that maintain their activity at high glucose concentrations. Studies of many glucose tolerant enzymes have been reported and due to the ongoing interest in these enzymes, here it has been reviewed this accumulated body of knowledge which provides valuable insights as to the kinetics, structure, regulation and evolution of glucose tolerant and glucose stimulated β-glucosidases.

A Novel Thermostable GH3 β-Glucosidase from Talaromyce leycettanus with Broad Substrate Specificity and Significant Soybean Isoflavone Glycosides-Hydrolyzing Capability

A novel β-glucosidase gene (Bgl3B) of glycoside hydrolase (GH) family 3 was cloned from the thermophilic fungus Talaromyce leycettanus JM12802 and successfully expressed in Pichia pastoris. The deduced Bgl3B contains 860 amino acid residues with a calculated molecular mass of 91.2 kDa. The purified recombinant Bgl3B exhibited maximum activities at pH 4.5 and 65°C and remained stable at temperatures up to 60°C and pH 3.0-9.0, respectively. The enzyme exhibited broad substrate specificities, showing β-glucosidase, glucanase, cellobiase, xylanase, and isoflavone glycoside hydrolase activities, and its activities were stimulated by short-chain alcohols. The catalytic efficiencies of Bgl3B were 693 and 104/mM/s towards pNPG and cellobiose, respectively. Moreover, Bgl3B was highly effective in converting isoflavone glycosides to aglycones at 37°C within 10 min, with the hydrolysis rates of 95.1%, 76.0%, and 75.3% for daidzin, genistin, and glycitin, respectively. These superior properties make Bgl3B potential for applications in the food, animal feed, and biofuel industries.

Penicillium citrinum UFV1 β-glucosidases: purification, characterization, and application for biomass saccharification

BACKGROUND

β-Glucosidases are components of the cellulase system, a family of enzymes that hydrolyze the β-1,4 linkages of cellulose. These proteins have been extensively studied due to the possibility of their use in various biotechnological processes. They have different affinities for substrates (depending on their source) and their activities can be used for saccharification of different types of biomass. In this context, the properties and the synergistic capacity of β-glucosidases from different organisms, to supplement the available commercial cellulase cocktails, need a comprehensive evaluation.

RESULTS

Two β-glucosidases belonging to GH3 family were secreted by Penicillium citrinum UFV. PcβGlu1 (241 kDa) and PcβGlu2 (95 kDa) presented acidic and thermo-tolerant characteristics. PcβGlu1 showed Michaelis-Menten kinetics for all substrates tested with K_m values ranging from 0.09 ± 0.01 (laminarin) to 1.7 ± 0.1 mM (cellobiose, C2) and k_cat values ranging from 0.143 ± 0.005 (laminarin) to 8.0 ± 0.2 s^-1 (laminaribiose, Lb). PcβGlu2 showed substrate inhibition for 4-methylumbelliferyl-β-d-glucopyranoside (MUβGlu), p-nitrophenyl-β-d-glucopyranoside (pNPβGlu), cellodextrins (C3, C4, and C5), N-octil-β-d-glucopyranoside, and laminaribiose, with K_m values ranging from 0.014 ± 0.001 (MUβGlu) to 0.64 ± 0.06 mM (C2) and k_cat values ranging from 0.49 ± 0.01 (gentiobiose) to 1.5 ± 0.2 s^-1 (C4). Inhibition constants (K_i) for PcβGlu2 substrate inhibition ranged from 0.69 ± 0.07 (MUβGlu) to 10 ± 1 mM (Lb). Glucose and cellobiose are competitive inhibitors of PcβGlu1 and PcβGlu2 when pNPβGlu is used as a substrate. For PcβGlu1 inhibition, K_i = 1.89 ± 0.08 mM (glucose) and K_i = 3.8 ± 0.1 mM (cellobiose); for PcβGlu2, K_i = 0.83 ± 0.05 mM (glucose) and K_i = 0.95 ± 0.07 mM (cellobiose). The enzymes were tested for saccharification of different biomasses, individually or supplementing a Trichoderma reesei commercial cellulose preparation. PcβGlu2 was able to hydrolyze banana pseudostem and coconut fiber with the same efficiency as the T. reesei cocktail, showing significant synergistic properties with T. reesei enzymes in the hydrolysis of these alternative biomasses.

CONCLUSIONS

The β-glucosidases from P. citrinum UFV1 present different enzymatic properties from each other and might have potential application in several biotechnological processes, such as hydrolysis of different types of biomass.

Cellulases from Thermophiles Found by Metagenomics

Cellulases are a heterogeneous group of enzymes that synergistically catalyze the hydrolysis of cellulose, the major component of plant biomass. Such reaction has biotechnological applications in a broad spectrum of industries, where they can provide a more sustainable model of production. As a prerequisite for their implementation, these enzymes need to be able to operate in the conditions the industrial process requires. Thus, cellulases retrieved from extremophiles, and more specifically those of thermophiles, are likely to be more appropriate for industrial needs in which high temperatures are involved. Metagenomics, the study of genes and gene products from the whole community genomic DNA present in an environmental sample, is a powerful tool for bioprospecting in search of novel enzymes. In this review, we describe the cellulolytic systems, we summarize their biotechnological applications, and we discuss the strategies adopted in the field of metagenomics for the discovery of new cellulases, focusing on those of thermophilic microorganisms.

A highly glucose-tolerant GH1 β-glucosidase with greater conversion rate of soybean isoflavones in monogastric animals

In the feed industry, β-glucosidase has been widely used in the conversion of inactive and bounded soybean isoflavones into active aglycones. However, the conversion is frequently inhibited by the high concentration of intestinal glucose in monogastric animals. In this study, a GH1 β-glucosidase (AsBG1) with high specific activity, thermostability and glucose tolerance (IC50 = 800 mM) was identified. It showed great glucose tolerance against substrates with hydrophobic aryl ligands (such as pNPG and soy isoflavones). Using soybean meal as the substrate, AsBG1 exhibited higher hydrolysis efficiency than the GH3 counterpart Bgl3A with or without the presence of glucose in the reaction system. Furthermore, it is the first time to find that the endogenous β-glucosidase of soybean meal, mostly belonging to GH3, plays a role in the hydrolysis of soybean isoflavones and is highly sensitive to glucose. These findings lead to a conclusion that the GH1 rather than GH3 β-glucosidase has prosperous application advantages in the conversion of soybean isoflavones in the feed industry.

Engineering the conserved and noncatalytic residues of a thermostable β-1,4-endoglucanase to improve specific activity and thermostability

Endoglucanases are increasingly applied in agricultural and industrial applications as a key biocatalyst for cellulose biodegradation. However, the low performance in extreme conditions seriously challenges the enzyme’s commercial utilization. To obtain endoglucanases with substantially improved activity and thermostability, structure-based rational design was carried out based on the Chaetomium thermophilum β-1,4-endoglucanase CTendo45. In this study, five mutant enzymes were constructed by substitution of conserved and noncatalytic residues using site-directed mutagenesis. Mutants were constitutively expressed in Pichia pastoris, purified, and ultimately tested for enzymatic characteristics. Two single mutants, Y30F and Y173F, increased the enzyme’s specific activity 1.35- and 1.87-fold using carboxymethylcellulose sodium (CMC-Na) as a substrate, respectively. Furthermore, CTendo45 and mutants exhibited higher activity towards β-D-glucan than that of CMC-Na, and activities of Y173F and Y30F were also increased obviously against β-D-glucan. In addition, Y173F significantly improved the enzyme’s heat resistance at 80 °C and 90 °C. More interestingly, the double mutant Y30F/Y173F obtained considerably higher stability at elevated temperatures but failed to inherit the increased catalytic efficiency of its single mutant counterparts. This work gives an initial insight into the biological function of conserved and noncatalytic residues of thermostable endoglucanases and proposes a feasible path for the improvement of enzyme redesign proposals.

The β-glucosidase secreted by Talaromyces amestolkiae under carbon starvation: a versatile catalyst for biofuel production from plant and algal biomass

BACKGROUND

In the last years, the most outstanding trend for obtaining high added-value components and second-generation (2G) biofuels consisted on exploitation of plant biomass. But recently, 3G biofuels, based in algae biomass, have emerged as a great alternative for production of energy.

RESULTS

In this work, a versatile β-glucosidase from the ascomycete fungus Talaromyces amestolkiae has been purified, characterized, and heterologously expressed. The synthesis of this β-glucosidase (BGL-3) was not induced by cellulose, and the presence of a specific carbon source is not required for its production, which is uncommon for β-glucosidases. BGL-3, which was obtained from a basal medium with glucose as carbon source, was profusely secreted under carbon starvation conditions, which was corroborated by qRT-PCR assays. BGL-3 was purified from T. amestolkiae cultures in one step, and biochemically characterized. The enzyme showed high thermal stability, and very high efficiency on pNPG (K_m of 0.14 mM and V_max of 381.1 U/mg), cellobiose (K_m of 0.48 mM and V_max of 447.1 U/mg), and other cello-oligosaccharides. Surprisingly, it also showed remarkable ability to hydrolyze laminarin, a β-1,3-glucan present in algae. The recombinant enzyme, obtained in the yeast Pichia pastoris, exhibited kinetic and physicochemical properties similar to those found for the native protein. Enzyme efficiency was examined in wheat straw saccharification processes, in which BGL-3 worked better supplementing Celluclast 1.5L than the commercial cellulase cocktail N-50010. Besides, BGL-3 hydrolyzed laminarin more efficiently than a commercial laminarinase.

CONCLUSIONS

A very efficient 1,4-β-glucosidase, which also showed activity over 1,3-β-glucose bonds, has been produced, purified, and characterized. This is the first report of such versatility in a 1,4-β-glucosidase. The application of this enzyme for saccharification of wheat straw and laminarin and its comparison with commercial enzymes suggest that it could be an interesting tool for the production of 2G and 3G biofuels.

Insights into the structural biology of Gaucher disease

Gaucher disease, the most common lysosomal storage disorder, is caused by mutations in the gene encoding the acid-β-glucosidase lysosomal hydrolase enzyme that cleaves glucocerebroside into glucose and ceramide. Reduced enzyme activity and impaired structural stability arise due to >300 known disease-causing mutations. Several of these mutations have also been associated with an increased risk of Parkinson disease (PD). Since the discovery of the acid-β-glucosidase X-ray structure, there have been major advances in our understanding of the structural properties of the protein. Analysis of specific residues has provided insight into their functional and structural importance and provided insight into the pathogenesis of Gaucher disease and the contribution to PD. Disease-causing mutations are positioned throughout the acid-β-glucosidase structure, with many located far from the active site and thus retaining some enzymatic activity however, thus far no clear relationship between mutation location and disease severity has been established. Here, we review the crystal structure of acid-β-glucosidase, while highlighting important structural aspects of the protein in detail. This review discusses the structural stability of acid-β-glucosidase, which can be altered by pH and glycosylation, and explores the relationship between known Gaucher disease and PD mutations, structural stability and disease severity.

A novel, highly efficient β-glucosidase with a cellulose-binding domain: characterization and properties of native and recombinant proteins

BACKGROUND

Cellulose, the most abundant biopolymer on earth, is an alternative for fossil fuels as a renewable feedstock for the production of second-generation biofuels and other chemicals. The discovery of novel, highly efficient β-glucosidases remains as one of the major bottlenecks for cellulose degradation. In this context, the ascomycete Talaromyces amestolkiae, isolated from cereal samples, has been studied as a promising source for these enzymes.

RESULTS

BGL-2 is the major β-glucosidase secreted by this fungus in the presence of cellulosic inductors. This enzyme possesses a CBD (Cellulose Binding Domain), an unusual feature among this type of proteins. Besides, when growing on cellulose, the fungus produced two different bgl-2 mRNAs that were cloned and expressed in Pichia pastoris. A complete recombinant protein (BGL-2*) and its truncated form, lacking CBD (BGL-2T*), have been purified, characterized and compared with the native enzyme (BGL-2). The three BGL-2 forms studied are highly stable in a wide pH range, but BGL-2T* showed an improved thermal stability at 50 °C after 72 h. Using p-nitrophenyl-β-d-glucopyranoside as a substrate, the steady-state kinetic characterization of the three proteins showed a similar K_m and k_cat for BGL-2 and BGL-2*, while the truncated protein displayed a threefold higher value for k_cat . All tested BGL-2 enzymes were as well highly efficient using cellobiose and other short oligosaccharides as a substrate. In view of biotechnological applications, the recombinant T. amestolkiae enzymes in saccharification of brewers' spent grain were studied, being comparable to commercial β-glucosidase cocktails.

CONCLUSION

A new β-glucosidase from T. amestolkiae has been studied. The enzyme, containing a functional CBD, has been expressed in P. pastoris. The comparative analyses of the native protein and its recombinant forms, with and without CBD, suggest that they could be suitable tools for valorization of lignocellulosic biomass.