Exotic collagen gradients in the byssus of the mussel Mytilus edulis

Perfluorooctanoate and nano titanium dioxide impair the byssus performance of the mussel Mytilus coruscus

Perfluorooctanoate (PFOA) is widely used as a surfactant and has metabolic, immunologic, developmental, and genetic toxicity on marine organisms. However, the effects of PFOA on individual defense functions in mussels in the presence of titanium dioxide nanoparticles (nano-TiO2) are poorly understood. To investigate the defense strategies and regulatory mechanisms of mussels under combined stressors, the thick-shell mussels Mytilus coruscus were exposed to different PFOA concentrations (0, 2 and 200 μg/L) and nano-TiO2 (0 and 0.1 mg /L, size: 25 nm) for 14 days. The results showed that, compared to the control group, PFOA and nano-TiO2 significantly reduced the number of byssal threads (NBT), byssal threads length (BTL), diameter of proximal threads (DPB), diameter of middle threads (DMB), diameter of distal byssal threads (DDB), adhesive plaque area (BPA), and breaking force of byssal threads (N). Under the influence of PFOA and nano-TiO2, the morphological surface smoothness of the fractured byssal threads surface increased, concurrently inducing an increased surface roughness in the adhesive plaques. Additionally, under the presence of PFOA and nano-TiO2, the foot displayed dispersed tissue organization and damaged villi, accompanied by an increased incidence of cellular apoptosis and an upregulation of the apoptosis gene caspase-8. Expression of the adhesion gene mfp-3 and byssal threads strength genes (preCOL-D, preCOL-NG) was upregulated. An interactive effect on the performance of byssal threads is observed under the combined influence of PFOA and nano-TiO2. Under co-exposure to PFOA and nano-TiO2, the performance of the byssal threads deteriorates, the foot structure is impaired, and the genes mRNA expression of byssal thread secretory proteins have compensated for the adhesion and byssal threads strength by up-regulation. Within marine ecosystems, organic and particulate contaminants exert a pronounced effect on the essential life processes of individual organisms, thereby jeopardizing their ecological niche within community assemblages and perturbing the dynamic equilibrium of the overarching ecosystem. ENVIRONMENTAL IMPLICATION: Perfluorooctanoic acid (PFOA) is prone to accumulate in marine organisms. TiO2 nanoparticles (nano-TiO2) are emerging environmental pollutants frequently found in marine environment. The effects of PFOA and nano-TiO2 on marine mussels are not well understood, and their toxic mechanisms remain largely unknown. We investigated the impacts of PFOA and nano-TiO2 on mussel byssus defense mechanisms. By assessing byssus performance indicators, morphological structures of the byssus, subcellular localization, and changes in byssal secretion-related genes, we revealed the combined effects and mechanisms through which these two types of pollutants may affect the functional capabilities and survival of mussels in the complex marine ecosystem.

Dietary exposure to nTiO2 reduces byssus performance of mussels under ocean warming

Nano‑titanium dioxide (nTiO₂) is a widely used nanomaterial posing potential ecological risk for marine ecosystems that might be enhanced by elevated temperatures such as expected during climate change. nTiO₂ may affect benthic filter feeders like mussels through waterborne exposures and via food chain due to the adsorption on/in algae. Mussel byssus are proteinaceous fibers secreted by byssal glands of the mussels for attachment. Byssus production and mechanical properties are sensitive to environmental stressors but the combined effects of warming and nTiO₂ on byssus performance of mussels are unclear hampering our understanding of the predation and dislodgement risk of mussels under the multiple stressor scenarios. We explored the effects of a short-term (14-day) single and combined exposures to warming (28 °C) and 100 μg L^-1 nTiO₂ (including food co-exposure) on the byssus performance of the thick shell mussel Mytilus coruscus. The mechanical strength (measured as the breaking force) of the byssal threads was impaired by warming and nTiO₂ (including food co-exposure), but the number and length of the byssal threads were increased. The mRNA expression levels of mussel foot proteins (mfp-3, mfp-5) and pre-collagens (preCOL-D, preCOL-P, preCOL-NG) were up-regulated to varying degrees, with the strongest effects induced by warming. This indicates that the physiological and molecular mechanisms of byssus secretion are plastic. However, downregulation of the mRNA expression of preCOL-D and preCOL-P under the combined warming and nTiO₂ exposures indicate the limits of these plasticity mechanisms and suggest that the attachment ability and survival of the mussels may be impaired if the pollution or temperature conditions further deteriorate.

Protein-Based Biological Materials: Molecular Design and Artificial Production

Polymeric materials produced from fossil fuels have been intimately linked to the development of industrial activities in the 20th century and, consequently, to the transformation of our way of living. While this has brought many benefits, the fabrication and disposal of these materials is bringing enormous sustainable challenges. Thus, materials that are produced in a more sustainable fashion and whose degradation products are harmless to the environment are urgently needed. Natural biopolymers─which can compete with and sometimes surpass the performance of synthetic polymers─provide a great source of inspiration. They are made of natural chemicals, under benign environmental conditions, and their degradation products are harmless. Before these materials can be synthetically replicated, it is essential to elucidate their chemical design and biofabrication. For protein-based materials, this means obtaining the complete sequences of the proteinaceous building blocks, a task that historically took decades of research. Thus, we start this review with a historical perspective on early efforts to obtain the primary sequences of load-bearing proteins, followed by the latest developments in sequencing and proteomic technologies that have greatly accelerated sequencing of extracellular proteins. Next, four main classes of protein materials are presented, namely fibrous materials, bioelastomers exhibiting high reversible deformability, hard bulk materials, and biological adhesives. In each class, we focus on the design at the primary and secondary structure levels and discuss their interplays with the mechanical response. We finally discuss earlier and the latest research to artificially produce protein-based materials using biotechnology and synthetic biology, including current developments by start-up companies to scale-up the production of proteinaceous materials in an economically viable manner.

Biological Materials Processing: Time-Tested Tricks for Sustainable Fiber Fabrication

There is an urgent need to improve the sustainability of the materials we produce and use. Here, we explore what humans can learn from nature about how to sustainably fabricate polymeric fibers with excellent material properties by reviewing the physical and chemical aspects of materials processing distilled from diverse model systems, including spider silk, mussel byssus, velvet worm slime, hagfish slime, and mistletoe viscin. We identify common and divergent strategies, highlighting the potential for bioinspired design and technology transfer. Despite the diversity of the biopolymeric fibers surveyed, we identify several common strategies across multiple systems, including: (1) use of stimuli-responsive biomolecular building blocks, (2) use of concentrated fluid precursor phases (e.g., coacervates and liquid crystals) stored under controlled chemical conditions, and (3) use of chemical (pH, salt concentration, redox chemistry) and physical (mechanical shear, extensional flow) stimuli to trigger the transition from fluid precursor to solid material. Importantly, because these materials largely form and function outside of the body of the organisms, these principles can more easily be transferred for bioinspired design in synthetic systems. We end the review by discussing ongoing efforts and challenges to mimic biological model systems, with a particular focus on artificial spider silks and mussel-inspired materials.

Fabrication of Tunable Mechanical Gradients by Mussels via Bottom-Up Self-Assembly of Collagenous Precursors

Functionally graded interfaces are prominent in biological tissues and are used to mitigate stress concentrations at junctions between mechanically dissimilar components. Biological mechanical gradients serve as important role models for bioinspired design in technically and biomedically relevant applications. However, this necessitates elucidating exactly how natural gradients mitigate mechanical mismatch and how such gradients are fabricated. Here, we applied a cross-disciplinary experimental approach to understand structure, function, and formation of mechanical gradients in byssal threads─collagen-based fibers used by marine mussels to anchor on hard surfaces. The proximal end of threads is approximately 50-fold less stiff and twice as extensible as the distal end. However, the hierarchical structure of the distal-proximal junction is still not fully elucidated, and it is unclear how it is formed. Using tensile testing coupled with video extensometry, confocal Raman spectroscopy, and transmission electron microscopy on native threads, we identified a continuous graded transition in mechanics, composition, and nanofibrillar morphology, which extends several hundreds of microns and which can vary significantly between individual threads. Furthermore, we performed in vitro fiber assembly experiments using purified secretory vesicles from the proximal and distal regions of the secretory glands (which contain different precursor proteins), revealing spontaneous self-assembly of distinctive distal- and proximal-like fiber morphologies. Aside from providing fundamental insights into the byssus structure, function, and fabrication, our findings reveal key design principles for bioinspired design of functionally graded polymeric materials.

High Performance Marine and Terrestrial Bioadhesives and the Biomedical Applications They Have Inspired

This study has reviewed the naturally occurring bioadhesives produced in marine and freshwater aqueous environments and in the mucinous exudates of some terrestrial animals which have remarkable properties providing adhesion under difficult environmental conditions. These bioadhesives have inspired the development of medical bioadhesives with impressive properties that provide an effective alternative to suturing surgical wounds improving closure and healing of wounds in technically demanding tissues such as the heart, lung and soft tissues like the brain and intestinal mucosa. The Gecko has developed a dry-adhesive system of exceptional performance and has inspired the development of new generation re-usable tapes applicable to many medical procedures. The silk of spider webs has been equally inspiring to structural engineers and materials scientists and has revealed innovative properties which have led to new generation technologies in photonics, phononics and micro-electronics in the development of wearable biosensors. Man made products designed to emulate the performance of these natural bioadhesive molecules are improving wound closure and healing of problematic lesions such as diabetic foot ulcers which are notoriously painful and have also found application in many other areas in biomedicine. Armed with information on the mechanistic properties of these impressive biomolecules major advances are expected in biomedicine, micro-electronics, photonics, materials science, artificial intelligence and robotics technology.

Nanolattice-Forming Hybrid Collagens in Protective Shark Egg Cases

Nanoscopic structural control with long-range ordering remains a profound challenge in nanomaterial fabrication. The nanoarchitectured egg cases of elasmobranchs rely on a hierarchically ordered latticework for their protective function─serving as an exemplary system for nanoscale self-assembly. Although the proteinaceous precursors are known to undergo intermediate liquid crystalline phase transitions before being structurally arrested in the final nanolattice architecture, their sequences have so far remained unknown. By leveraging RNA-seq and proteomic techniques, we identified a cohort of nanolattice-forming proteins comprising a collagenous midblock flanked by domains typically associated with innate immunity and network-forming collagens. Structurally homologous proteins were found in the genomes of other egg-case-producing cartilaginous fishes, suggesting a conserved molecular self-assembly strategy. The identity and stabilizing role of cross-links were subsequently elucidated using mass spectrometry and in situ small-angle X-ray scattering. Our findings provide a new design approach for protein-based liquid crystalline elastomers and the self-assembly of nanolattices.

In vitro angiotensin-converting enzyme and dipeptidyl peptidase-IV inhibitory, and antioxidant activity of blue mussel (Mytilus edulis) byssus collagen hydrolysates

Large quantities of mussel byssus are generated annually as a co-product of the mussel-processing industry. This fibrous material is a rich source of collagen, which when extracted has potential uses as an alternative source of collagen for food applications. However, due the complex structure of the material, the extraction of the collagenous components using food-friendly strategies has proved challenging to date. An enzyme-aided method, using a proline endoproteinase, was employed for the extraction of collagen from mussel byssus yielding 138.82 ± 2.25 mg collagen/g dry weight. Hydrolysates of the collagen extract were generated using five food-grade enzyme preparations with Corolase® PP giving the highest extent of hydrolysis. Reversed-phase and gel permeation high-performance liquid chromatography of the extracted collagen and its enzymatic hydrolysates showed significant hydrolysis of collagen. The hydrolysates generated with Corolase® PP showed the highest in vitro bioactivities: angiotensin-converting enzyme (ACE) IC50 = 0.79 ± 0.17 mg/ml, dipeptidyl peptidase-IV (DPP-IV) IC50 = 0.66 ± 0.17 mg/ml and oxygen radical absorbance capacity (ORAC) activity = 311.23 ± 13.41 µmol trolox equivalents (TE)/g. The results presented herein indicate that in addition to acting as an alternative source of collagen for food applications, mussel byssus collagen-derived hydrolysates have potential applications as functional food ingredients for the management of metabolic diseases such as type II diabetes and hypertension.

The byssal-producing glands and proteins of the silverlip pearl oyster Pinctada maxima (Jameson, 1901)

Pinctada maxima are most well known for their production of high-quality natural pearls. They also generate another natural material, the byssus, an adhesive thread critical for steadfast attachment underwater. Herein, P. maxima byssal threads were analysed via proteotranscriptomics to reveal 49 proteins. Further characterisation was undertaken on five highly expressed genes: glycine-rich thread protein (GRT; also known as PUF3), apfp1/perlucin-like protein (Pmfp1); peroxidase; thrombospondin 1, and Balbiani ring 3 (BR3), which showed localised tissue expression. The spatial distribution of GRT and Pmfp1 via immunodetection combined with histology helped to identify glandular regions of the foot that contribute to byssal thread production: the byssal gland, the duct gland, and two thread-forming glands of basophilic and acidophilic serous-like cells. This work advanced primary knowledge on the glands involved in the creation of byssal threads and the protein composition of the byssus for P. maxima, providing a platform for the design of marine biopolymers.

Diverse silk and silk-like proteins derived from terrestrial and marine organisms and their applications

Organisms develop unique systems in a given environment. In the process of adaptation, they employ materials in a clever way, which has inspired mankind extensively. Understanding the behavior and material properties of living organisms provides a way to emulate these natural systems and engineer various materials. Silk is a material that has been with human for over 5000 years, and the success of mass production of silkworm silk has realized its applications to medical, pharmaceutical, optical, and even electronic fields. Spider silk, which was characterized later, has expanded the application sectors to textile and military materials based on its tough mechanical properties. Because silk proteins are main components of these materials and there are abundant creatures producing silks that have not been studied, the introduction of new silk proteins would be a breakthrough of engineering materials to open innovative industry fields. Therefore, in this review, we present diverse silk and silk-like proteins and how they are utilized with respect to organism's survival. Here, the range of organisms are not constrained to silkworms and spiders but expanded to other insects, and even marine creatures which produce silk-like proteins that are not observed in terrestrial silks. This viewpoint broadening of silk and silk-like proteins would suggest diverse targets of engineering to design promising silk-based materials. STATEMENT OF SIGNIFICANCE: Silk has been developed as a biomedical material due to unique mechanical and chemical properties. For decades, silks from various silkworm and spider species have been intensively studied. More recently, other silk and silk-like proteins with different sequences and structures have been reported, not only limited to terrestrial organisms (honeybee, green lacewing, caddisfly, and ant), but also from marine creatures (mussel, squid, sea anemone, and pearl oyster). Nevertheless, there has hardly been well-organized literature on silks from such organisms. Regarding the relationship among sequence-structure-properties, this review addresses how silks have been utilized with respect to organism's survival. Finally, this information aims to improve the understanding of diverse silk and silk-like proteins which can offer a significant interest to engineering fields.

Following the thread: Mytilus mussel byssus as an inspired multi-functional biomaterial

Over the last 15 years, the byssus of marine mussels (Mytilus spp.) has emerged as an important model system for the bio-inspired development and synthesis of advanced polymers and adhesives. But how did these seemingly inconsequential fibers that are routinely discarded in mussel hors d’oeuvres become the focus of intense international research. In the present review, we take a historical perspective to understand this phenomenon. Our purpose is not to review the sizeable literature of mussel-inspired materials, as there are numerous excellent reviews that cover this topic in great depth. Instead, we explore how the byssus became a magnet for bio-inspired materials science, with a focus on the specific breakthroughs in the understanding of composition, structure, function, and formation of the byssus achieved through fundamental scientific investigation. Extracted principles have led to bio-inspired design of novel materials with both biomedical and technical applications, including surgical adhesives, self-healing polymers, tunable hydrogels, and even actuated composites. Continued study into the byssus of Mytilid mussels and other species will provide a rich source of inspiration for years to come.

Microplastics and food shortage impair the byssal attachment of thick-shelled mussel Mytilus coruscus

Microplastics (MPs) have become a ubiquitous emerging pollutant in the global marine environment. The potential toxic effects of MPs and interactions of MP pollution with other stressors such as food limitation on marine organisms' health are not yet well understood. This study investigated the effects of three-week exposure to different MPs and food shortage on the physical defense mechanisms (byssus production and properties) of Mytilus coruscus. Starvation significantly reduced the number of byssus threads, and combined exposure to MPs and food shortage suppressed the adhesion ability and condition index of mussels. The length of the byssus threads was not affected by all experimental exposures. Transcript levels of genes encoding key proteins involved in byssus formation (the mussel foot proteins mfp-1, -2, -3, -4, -5 and -6, and prepolymerized collagen proteins preCOL-D, -P and -NG) were altered by interactions between the MPs and food shortage. These findings show that insufficient food supply can exacerbate the adverse effects of MPs on mussel defense which might have implications for survival and fitness of mussels under food limited conditions (e.g. in winter) in polluted coastal habitats.

The protein and volatile components of trail mucus in the Common Garden Snail, Cornu aspersum

The Common or Brown Garden Snail, Cornu aspersum, is an invasive land snail that has successfully colonized a diverse range of global environments. Like other invasive land snails, it is a significant pest of a variety of agricultural crops, including citrus, grapes and canola. Cornu aspersum secretes a mucus trail when mobile that facilitates locomotion. The involvement of the trail in conspecific chemical communication has also been postulated. Our study found that anterior tentacle contact with conspecific mucus elicited a significant increase in heart rate from 46.9 to 51 beats per minute. In order to gain a better understanding of the constituents of the trail mucus and the role it may play in snail communication, the protein and volatile components of mucus trails were investigated. Using two different protein extraction methods, mass spectrometry analysis yielded 175 different proteins, 29 of which had no significant similarity to any entries in the non-redundant protein sequence database. Of the mucus proteins, 22 contain features consistent with secreted proteins, including a perlucin-like protein. The eight most abundant volatiles detected using gas chromatography were recorded (including propanoic acid and limonene) and their potential role as putative pheromones are discussed. In summary, this study has provided an avenue for further research pertaining to the role of trail mucus in snail communication and provides a useful repository for land snail trail mucus components. This may be utilized for further research regarding snail attraction and dispersal, which may be applied in the fields of agriculture, ecology and human health.

Hydrophobic and Hydrophilic Effects in a Mussel-Inspired Citrate-Based Adhesive

The citrate-based tissue adhesive, synthesized by citric acid, diol, and dopamine, is a kind of mussel-inspired adhesive. The adhesion of mussel-inspired adhesive is not completely dependent on 3, 4-dihydroxyphenylalanine (Dopa) groups. The backbone structure of the adhesive also greatly affects the adhesion. In this study, to explore the effects of hydrophobicity and hydrophilicity of the backbone structure on adhesion, we prepared a series of citrate-based tissue adhesives (POEC-d) by changing the molar ratio of two diols, 1, 8-octanediol (O) and poly(ethylene oxide) (E), which formed hydrophobic segment units and hydrophilic segment units, respectively, in the molecule structure. The properties of cured adhesives showed that the adhesive with high E units had high swelling, rapid degradation, and low cohesion. In the adhesion strength measurement on the porcine skin, the adhesive with higher hydrophobicity was more likely to perform better. For the interfacial adhesion, hydrophilicity was conducive to the diffusion and penetration on the skin surface, but hydrophobic interaction showed a stronger effect to adhere with skin and hydrophobic association increased the adhesive concentration on the interface; for the bulk cohesion, hydrophobicity led to coacervation, promoting the Dopa-quinone coupling for cross-linking. In this amphipathic, citrate-based, soft-tissue adhesive system, when the feed ratio of hydrophilic segment was lower than 0.7, the coacervation could be formed through hydrophobic interaction, forming an efficient underwater adhesion system similar to that of mussels.

Molecular Dynamics of Synthetic Flagelliform Silk Fiber Assembly

In order to better understand the relationship between Flagelliform (Flag) spider silk molecular structural organization and the mechanisms of fiber assembly, it was designed and produced the Nephilengys cruentata Flag spidroin analogue rNcFlag2222. The recombinant proteins are composed by the elastic repetitive glycine-rich motifs (GPGGX/GGX) and the spacer region, rich in hydrophilic charged amino acids, present at the native silk spidroin. Using different approaches for nanomolecular protein analysis, the structural data of rNcFlag2222 recombinant proteins were compared in its fibrillar and in its fully solvated states. Based on the results was possible to identify the molecular structural dynamics of NcFlag2222 prior to and after fiber formation. Overal rNcFlag2222 shows a mixture of semiflexible and rigid conformations, characterized mostly by the presence of PPII, β-turn and β-sheet. These results agree with previous studies and bring insights about the molecular mechanisms that might driven Flag silk fibers assembly and elastomeric behavior.

Exposure to microplastics reduces attachment strength and alters the haemolymph proteome of blue mussels (Mytilus edulis)

The contamination of marine ecosystems with microplastics, such as the polymer polyethylene, a commonly used component of single-use packaging, is of global concern. Although it has been suggested that biodegradable polymers, such as polylactic acid, may be used to replace some polyethylene packaging, little is known about their effects on marine organisms. Blue mussels, Mytilus edulis, have become a "model organism" for investigating the effects of microplastics in marine ecosystems. We show here that repeated exposure, over a period of 52 days in an outdoor mesocosm setting, of M. edulis to polyethylene microplastics reduced the number of byssal threads produced and the attachment strength (tenacity) by ∼50%. Exposure to either type of microplastic altered the haemolymph proteome and, although a conserved response to microplastic exposure was observed, overall polyethylene resulted in more changes to protein abundances than polylactic acid. Many of the proteins affected are involved in vital biological processes, such as immune regulation, detoxification, metabolism and structural development. Our study highlights the utility of mass spectrometry-based proteomics to assess the health of key marine organisms and identifies the potential mechanisms by which microplastics, both conventional and biodegradable, could affect their ability to form and maintain reefs.

Healing through Histidine: Bioinspired Pathways to Self-Healing Polymers via Imidazole⁻Metal Coordination

Biology offers a valuable inspiration toward the development of self-healing engineering composites and polymers. In particular, chemical level design principles extracted from proteinaceous biopolymers, especially the mussel byssus, provide inspiration for design of autonomous and intrinsic healing in synthetic polymers. The mussel byssus is an acellular tissue comprised of extremely tough protein-based fibers, produced by mussels to secure attachment on rocky surfaces. Threads exhibit self-healing response following an apparent plastic yield event, recovering initial material properties in a time-dependent fashion. Recent biochemical analysis of the structure-function relationships defining this response reveal a key role of sacrificial cross-links based on metal coordination bonds between Zn2+ ions and histidine amino acid residues. Inspired by this example, many research groups have developed self-healing polymeric materials based on histidine (imidazole)-metal chemistry. In this review, we provide a detailed overview of the current understanding of the self-healing mechanism in byssal threads, and an overview of the current state of the art in histidine- and imidazole-based synthetic polymers.

Catecholic Compounds in Ctenophore Colloblast and Nerve Net Proteins Suggest a Structural Role for DOPA-Like Molecules in an Early-Diverging Animal Lineage

Ctenophores, or comb jellies, are among the earliest-diverging extant animal lineages. Several recent phylogenomic studies suggest that they may even be the sister group to all other animals. This unexpected finding remains difficult to contextualize, particularly given ctenophores' unique and sometimes poorly understood physiology. Colloblasts, a ctenophore-specific cell type found on the surface of these animals' tentacles, are emblematic of this difficulty. The exterior of the colloblast is dotted with granules that burst and release an adhesive on contact with prey, ensnaring it for consumption. To date, little is known about the fast-acting underwater adhesive that these cells secrete or its biochemistry. We present evidence that proteins in the colloblasts of the ctenophore Pleurobrachia bachei incorporate catecholic compounds similar to the amino acid l-3,4-dihydroxyphenylalanine. These compounds are associated with adhesive-containing granules on the surface of colloblasts, suggesting that they may play a role in prey capture, akin to dihydroxyphenylalanine-based adhesives in mussel byssus. We also present unexpected evidence of similar catecholic compounds in association with the subepithelial nerve net. There, catecholic compounds are present in spatial patterns similar to those of l-3,4-dihydroxyphenylalanine and its derivatives in cnidarian nerves, where they are associated with membranes and possess unknown functionality. This "structural" use of catecholic molecules in ctenophores represents the earliest-diverging animal lineage in which this trait has been observed, though it remains unclear whether structural catechols are deeply rooted in animals or whether they have arisen multiple times.

Salivary and Gut Microbiomes Play a Significant Role in in Vitro Oral Bioaccessibility, Biotransformation, and Intestinal Absorption of Arsenic from Food

The release of a toxicant from a food matrix during the gastrointestinal digestion is a crucial determinant of the toxicant's oral bioavailability. We present a modified setup of the human simulator of the gut microbial ecosystem (SHIME), with four sequential gastrointestinal reactors (oral, stomach, small intestine, and colon), including the salivary and colonic microbiomes. Naturally arsenic-containing rice, mussels, and nori seaweed were digested in the presence of microorganisms and in vitro oral bioaccessibility, bioavailability, and metabolism of arsenic species were evaluated following analysis by using HPLC/mass spectrometry. When food matrices were digested with salivary bacteria, the soluble arsenic in the gastric digestion stage increased for mussel and nori samples, but no coincidence impact was found in the small intestinal and colonic digestion stages. However, the simulated small intestinal absorption of arsenic was increased in all food matrices (1.2-2.7 fold higher) following digestion with salivary microorganisms. No significant transformation of the arsenic species occurred except for the arsenosugars present in mussels and nori. In those samples, conversions between the oxo arsenosugars were observed in the small intestinal digestion stage whereupon the thioxo analogs became major metabolites. These results expand our knowledge on the likely metabolism and oral bioavailabiltiy of arsenic during human digestion, and provide valuable information for future risk assessments of dietary arsenic.

Direct Observation of the Interplay of Catechol Binding and Polymer Hydrophobicity in a Mussel-Inspired Elastomeric Adhesive

Marine organisms such as mussels have mastered the challenges in underwater adhesion by incorporating post-translationally modified amino acids like l-3,4-dihydroxyphenylalanine (DOPA) in adhesive proteins. Here we designed a catechol containing elastomer adhesive to identify the role of catechol in interfacial adhesion in both dry and wet conditions. To decouple the adhesive contribution of catechol to the overall adhesion, the elastomer was designed to be cross-linked through [2 + 2] photo-cycloaddition of coumarin. The elastomer with catechol moieties displayed a higher adhesion strength than the catechol-protected elastomer. The contact interface was probed using interface-sensitive sum frequency generation spectroscopy to explore the question of whether catechol can displace water and bond with hydrophilic surfaces. The spectroscopy measurements reveal that the maximum binding energy of the catechol and protected-catechol elastomers to sapphire substrate is 7.0 ± 0.1 kJ/(mole of surface O-H), which is equivalent to 0.10 J/m2. The higher dry and wet adhesion observed in the macroscopic adhesion measurements for the catechol containing elastomer originates from multiple hydrogen bonds of the catechol dihydroxy groups to the surface. In addition, our results show that catechol by itself does not remove the confined interstitial water. In these elastomers, it is the hydrophobic groups that help in partially removing interstitial water. The observation of the synergy between catechol binding and hydrophobicity in enabling the mussel-inspired soft adhesive elastomer to stick underwater provides a framework for designing materials for applications in tissue adhesion and moist-skin wearable electronics.

Hypoxia weakens mussel attachment by interrupting DOPA cross-linking during adhesive plaque curing

Marine mussels (Mytilus spp.) attach to a wide variety of surfaces underwater using a network of byssal threads, each tipped with a protein-based adhesive plaque that uses the surrounding seawater environment as a curing agent. Plaques undergo environmental post-processing, requiring a basic seawater pH be maintained for up to 8 days for the adhesive to strengthen completely. Given the sensitivity of plaques to local pH conditions long after deposition, we investigated the effect of other aspects of the seawater environment that are known to vary in nearshore habitats on plaque curing. The effect of seawater temperature, salinity and dissolved oxygen concentration were investigated using tensile testing, atomic force microscopy and amino acid compositional analysis. High temperature (30°C) and hyposalinity (1 PSU) had no effect on adhesion strength, while incubation in hypoxia (0.9 mg l-1) caused plaques to have a mottled coloration and prematurely peel from substrates, leading to a 51% decrease in adhesion strength. AFM imaging of the plaque cuticle found that plaques cured in hypoxia had regions of lower stiffness throughout, indicative of reductions in DOPA cross-linking between adhesive proteins. A better understanding of the dynamics of plaque curing could aid in the design of better synthetic adhesives, particularly in medicine where adhesion must take place within wet body cavities.

Spider silk proteome provides insight into the structural characterization of Nephila clavipes flagelliform spidroin

The capture spiral of web from N. clavipes spider consists of a single type of spidroin - the flagelliform silk protein, a natural material representing a combination of strength and high elasticity. Flagelliform spider silk is the most extensible silk fibre produced by orb weaver spiders and the structure of this remarkable material is still largely unknown. In the present study we used a proteomic approach to elucidate the complete sequence and the post-translational modifications of flagelliform silk proteins. The long sequence of flagelliform silk protein presents 45 hydroxylated proline residues, which may contribute to explain the mechanoelastic property of these fibres, since they are located in the GPGGX motif. The 3D-structure of the protein was modelled considering the three domains together, i.e., the N- and C-terminal non-repetitive domains, and the central repetitive domain. In the resulting molecular model there is a predominance of random structures in the solid fibres of the silk protein. The N-terminal domain is composed of three α-helices and the C-terminal domain is composed of one small helical section. Proteomic data reported herein may be relevant for the development of novel approaches for the synthetic or recombinant production of novel silk-based spider polymers.

Lipids as integral components in mussel adhesion

Lipids are fundamental components of cells in organisms. Recent studies reveal that lipids are also present in cell-free bioadhesives. Examples include barnacle cement, sea star footprints, hairy and smooth pads of insects and gecko setae. Whether reliance on lipids is universal in bioadhesion is not known. In the present study, we demonstrated, for the first time, the involvement of lipids in mussel adhesion. We extracted, identified and localized lipids in the byssal threads. The lipids were confirmed as fatty acids by gas chromatograpy mass spectrometry. δ13C measurements of the fatty acids in the byssus were also conducted. Results show that byssal fatty acids, with concentrations ranging from 1.10-2.51 mg g-1 by thread dry weight depending on the mussel species, are localized both on the surface of and inside the byssal thread and plaque. Over half of the fatty acids were loosely attached to the surface while a small portion were tightly bound to the byssus. Most of the surface fatty acids disappear within a week of thread deposition. δ13C values of byssal fatty acids show isotope fractionation suggesting that thread fatty acids are derived from the foot. It is possible that fatty acids are key players in expelling water and preparing the substrate surface for adhesion. Using lipids in the adhesion process might be a common strategy for organisms in need of temporary or permanent attachment. The process of lipid participation may be as important as adhesive components for developing more efficient man-made glues.

Collagen extraction from mussel byssus: a new marine collagen source with physicochemical properties of industrial interest

Mussel byssus is a by-product of mussel production and is a potential source of collagen. The goal of this study was to extract collagen from the byssus of Chilean mussel using an enzymatic method and characterize it. A pepsin-aided extraction method was employed where first an enzymatic hydrolysis at two pepsin/substrate ratios (1:50 or 4:50) and times (4 or 24 h) was done. Extraction was conducted at 80 °C for 24 h, in a 0.5 N acetic acid solution. All samples were analyzed for collagen content, amino acid profile, turbidity, viscosity, solubility, denaturation temperature and surface tension. Hydrolysis time had significant effect on collagen content, hydroxyproline content and extraction yield. Hydrolysis with a pepsin/byssus ratio of 4:50 for 24 h gave the better extraction performance with values of 69 mg/g protein, 1.8 mg/g protein and 30%, for collagen content, hydroxyproline content and extraction yield, respectively. No differences were found for the viscosity and surface tension of collagen dispersions, suggesting that the enzymatic hydrolysis did not affect the integrity of the collagen molecule. Denaturation temperature of freeze-dried byssus collagen presented a high value (83-91 °C), making this kind of collagen a very interesting material for encapsulation of bioactive molecules and for biomedical applications.

Interspecies comparison of the mechanical properties and biochemical composition of byssal threads

Several bivalve species produce byssus threads to provide attachment to substrates, with mechanical properties highly variable among species. Here, we examined the distal section of byssal threads produced by a range of bivalve species (Mytilus edulis, Mytilus trossulus, Mytilus galloprovincialis, Mytilus californianus, Pinna nobilis, Perna perna, Xenostrobus securis, Brachidontes solisianus and Isognomon bicolor) collected from different nearshore environments. Morphological and mechanical properties were measured, and biochemical analyses were performed. Multivariate redundancy analyses on mechanical properties revealed that byssal threads of M. californianus, M. galloprovincialis and P. nobilis have very distinct mechanical behaviors compared to the remaining species. Extensibility, strength and force were the main variables separating these species groups, which were highest for M. californianus and lowest for P. nobilis. Furthermore, the analysis of the amino acid composition revealed that I. bicolor and P. nobilis threads are significantly different from the other species, suggesting a different underlying structural strategy. Determination of metal contents showed that the individual concentration of inorganic elements varies but that the dominant elements are conserved between species. Altogether, this bivalve species comparison suggests some molecular bases for the biomechanical characteristics of byssal fibers that may reflect phylogenetic limitations.

Recent approaches in designing bioadhesive materials inspired by mussel adhesive protein

Marine mussels secret protein-based adhesives, which enable them to anchor to various surfaces in a saline, intertidal zone. Mussel foot proteins (Mfps) contain a large abundance of a unique, catecholic amino acid, Dopa, in their protein sequences. Catechol offers robust and durable adhesion to various substrate surfaces and contributes to the curing of the adhesive plaques. In this article, we review the unique features and the key functionalities of Mfps, catechol chemistry, and strategies for preparing catechol-functionalized polymers. Specifically, we reviewed recent findings on the contributions of various features of Mfps on interfacial binding, which include coacervate formation, surface drying properties, control of the oxidation state of catechol, among other features. We also summarized recent developments in designing advanced biomimetic materials including coacervate-forming adhesives, mechanically improved nano- and micro-composite adhesive hydrogels, as well as smart and self-healing materials. Finally, we review the applications of catechol-functionalized materials for the use as biomedical adhesives, therapeutic applications, and antifouling coatings. © 2016 The Authors. Journal of Polymer Science Part A: Polymer Chemistry Published by Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2017, 55, 9-33.

Biotechnological production of the mussel byssus derived collagen preColD

preColD, a mussel byssus derived structural protein with a central collagen, was successfully produced recombinantly in the yeast Pichia pastoris. It shows stable beta-sheet secondary structure (based on its silk-like terminal domains) and undergoes fibrillization as the natural preCols.

A Review of Natural Joint Systems and Numerical Investigation of Bio-Inspired GFRP-to-Steel Joints

There are a great variety of joint types used in nature which can inspire engineering joints. In order to design such biomimetic joints, it is at first important to understand how biological joints work. A comprehensive literature review, considering natural joints from a mechanical point of view, was undertaken. This was used to develop a taxonomy based on the different methods/functions that nature successfully uses to attach dissimilar tissues. One of the key methods that nature uses to join dissimilar materials is a transitional zone of stiffness at the insertion site. This method was used to propose bio-inspired solutions with a transitional zone of stiffness at the joint site for several glass fibre reinforced plastic (GFRP) to steel adhesively bonded joint configurations. The transition zone was used to reduce the material stiffness mismatch of the joint parts. A numerical finite element model was used to identify the optimum variation in material stiffness that minimises potential failure of the joint. The best bio-inspired joints showed a 118% increase of joint strength compared to the standard joints.

Biomineralization of Schlumbergerella floresiana, a significant carbonate-producing benthic foraminifer

Most foraminifera that produce a shell are efficient biomineralizers. We analyzed the calcitic shell of the large tropical benthic foraminifer Schlumbergerella floresiana. We found a suite of macromolecules containing many charged and polar amino acids and glycine that are also abundant in biomineralization proteins of other phyla. As neither genomic nor transcriptomic data are available for foraminiferal biomineralization yet, de novo-generated sequences, obtained from organic matrices submitted to ms blast database search, led to the characterization of 156 peptides. Very few homologous proteins were matched in the proteomic database, implying that the peptides are derived from unknown proteins present in the foraminiferal organic matrices. The amino acid distribution of these peptides was queried against the uniprot database and the mollusk uniprot database for comparison. The mollusks compose a well-studied phylum that yield a large variety of biomineralization proteins. These results showed that proteins extracted from S. floresiana shells contained sequences enriched with glycine, alanine, and proline, making a set of residues that provided a signature unique to foraminifera. Three of the de novo peptides exhibited sequence similarities to peptides found in proteins such as pre-collagen-P and a group of P-type ATPases including a calcium-transporting ATPase. Surprisingly, the peptide that was most similar to the collagen-like protein was a glycine-rich peptide reported from the test and spine proteome of sea urchin. The molecules, identified by matrix-assisted laser desorption ionization-time of flight mass spectrometry analyses, included acid-soluble N-glycoproteins with its sugar moieties represented by high-mannose-type glycans and carbohydrates. Describing the nature of the proteins, and associated molecules in the skeletal structure of living foraminifera, can elucidate the biomineralization mechanisms of these major carbonate producers in marine ecosystems. As fossil foraminifera provide important paleoenvironmental and paleoclimatic information, a better understanding of biomineralization in these organisms will have far-reaching impacts.

Four-stranded coiled-coil elastic protein in the byssus of the giant clam, Tridacna maxima

An elastic protein with a secondary structure distinct from all well-known load-bearing proteins is found in the byssus of the giant clam, Tridacna maxima . The byssus consists of a bundle of hundreds of individual threads, each measuring about about 100 μm in diameter, which exhibit a tendon-like mechanical response. The amino acid composition of Tridacna byssus, however, is unlike tendon collagen, lacking high glycine, proline, and hydroxyproline. Wide-angle X-ray scattering (WAXS) and small-angle X-ray scattering (SAXS) measurements suggest that the constituent nanofibrils of the byssal threads are distinct from known secondary structure motifs previously reported for elastic proteins including the collagen triple-helix, the β-sheet nanocrystalline domains of silks, or the double-stranded coiled-coil regions of intermediate filaments. Instead, X-ray diffraction data indicate a structural organization in which four coiled-coil α-helices form a stable rope-like structure, which then further pack in a pseudohexagonal lattice to form nanofibrils. Amino acid composition analysis shows unusually high concentrations of acidic as well as basic residues, suggesting that the four-helix structure is stabilized by strong ionic interactions between oppositely charged residues in neighboring strands. The composition also suggests additional stabilization by disulfide cross-linking. On a larger scale, scanning and conventional transmission electron microscope (STEM and TEM) observations indicate that the nanofibrils exhibit an alternating periodicity of about 500 nm along the axial direction. A molecular model that combines the mechanical properties with the structural characteristics of the Tridacna byssal threads is proposed.

Hyperunstable matrix proteins in the byssus of Mytilus galloprovincialis

The marine mussel Mytilus galloprovincialis is tethered to rocks in the intertidal zone by a holdfast known as the byssus. Functioning as a shock absorber, the byssus is composed of threads, the primary molecular components of which are collagen-containing proteins (preCOLs) that largely dictate the higher order self-assembly and mechanical properties of byssal threads. The threads contain additional matrix components that separate and perhaps lubricate the collagenous microfibrils during deformation in tension. In this study, the thread matrix proteins (TMPs), a glycine-, tyrosine- and asparagine-rich protein family, were shown to possess unique repeated sequence motifs, significant transcriptional heterogeneity and were distributed throughout the byssal thread. Deamidation was shown to occur at a significant rate in a recombinant TMP and in the byssal thread as a function of time. Furthermore, charge heterogeneity presumably due to deamidation was observed in TMPs extracted from threads. The TMPs were localized to the preCOL-containing secretory granules in the collagen gland of the foot and are assumed to provide a viscoelastic matrix around the collagenous fibers in byssal threads.

Tensile and dynamic mechanical analysis of the distal portion of mussel (Mytilus edulis) byssal threads

Dynamic mechanical analysis was used to record the behaviour of hydrated and dehydrated byssal threads under tensile stress and during dynamic thermal cycling. Fresh byssi, and byssi aged two weeks prior to testing, were used to further study the effects of age on the mechanical properties of this material. It was found that while older threads demonstrated increased stiffness, age did not necessarily affect their ultimate tensile strength. Dehydration had a more pronounced effect on thread stiffness and also increased the ultimate strength of the material. In their dry state, byssal threads displayed multiple yield points under tension and these, it is suggested, could equate to different phases within the bulk of the material. Dynamic analysis revealed glass transition (Tg) and ecologically relevant operational temperatures for byssi, where their modulus (E') remained constant. These discoveries are related to the ecological function of byssal threads and to the emerging field of biomimetics.

Holdfast heroics: comparing the molecular and mechanical properties of Mytilus californianus byssal threads

The marine mussel Mytilus californianus Conrad inhabits the most wave-exposed regions of the rocky intertidal by dint of its extraordinary tenacity. Tenacity is mediated in large part by the byssus, a fibrous holdfast structure. M. californianus byssal threads, which are mechanically superior to the byssal threads of other mytilids, are composed almost entirely of a consortium of three modular proteins known as the preCols. In this study,the complete primary sequence of preCols from M. californianus was deduced and compared to that of two related species with mechanically inferior byssal threads, M. edulis Linnaeus and M. galloprovincialisLamarck in order to explore structure–function relationships.

The preCols from M. californianus are more divergent from the other two species than they are from one another. However, the degree of divergence is not uniform among the various domains of the preCols, allowing us to speculate on their mechanical role. For instance, the extra spider silk-like runs of alanine-rich sequence in the flanking domains of M. californianus may increase crystalline order, enhancing strength and stiffness. Histidine-rich domains at the termini, in contrast, are highly conserved between species, suggesting a mechanical role common to all three. Mechanical testing of pH-treated and chemically derivatized distal threads strongly suggests that histidine side chains are ligands in reversible,metal-mediated cross-links in situ. By combining the mechanical and sequence data, yield and self-healing in the distal region of threads have been modeled to emphasize the intricate interplay of enthalpic and entropic effects during tensile load and recovery.