Halogenated flame retardants: do the fire safety benefits justify the risks?

Eco-Friendly Polymer Nanocomposite Coatings for Next-Generation Fire Retardants for Building Materials

The increasing global commitment to carbon neutrality has propelled a heightened focus on sustainable construction materials, with wood emerging as pivotal due to its environmental benefits. This review explores the development and application of eco-friendly polymer nanocomposite coatings to enhance wood's fire resistance, addressing a critical limitation in its widespread adoption. These nanocomposites demonstrate improved thermal stability and char formation properties by integrating nanoparticles, such as nano-clays, graphene oxide, and metal oxides, into biopolymer matrices. This significantly mitigates the flammability of wood substrates, creating a robust barrier against heat and oxygen. The review provides a comprehensive examination of these advanced coatings' synthesis, characterization, and performance. By emphasizing recent innovations and outlining future research directions, this review underscores the potential of eco-friendly polymer nanocomposite coatings as next-generation fire retardants. This advancement supports the expanded utilization of wood in sustainable construction practices and aligns with global initiatives toward achieving carbon neutrality.

Guardians under Siege: Exploring Pollution's Effects on Human Immunity

Chemical pollution poses a significant threat to human health, with detrimental effects on various physiological systems, including the respiratory, cardiovascular, mental, and perinatal domains. While the impact of pollution on these systems has been extensively studied, the intricate relationship between chemical pollution and immunity remains a critical area of investigation. The focus of this study is to elucidate the relationship between chemical pollution and human immunity. To accomplish this task, this study presents a comprehensive review that encompasses in vitro, ex vivo, and in vivo studies, shedding light on the ways in which chemical pollution can modulate human immunity. Our aim is to unveil the complex mechanisms by which environmental contaminants compromise the delicate balance of the body's defense systems going beyond the well-established associations with defense systems and delving into the less-explored link between chemical exposure and various immune disorders, adding urgency to our understanding of the underlying mechanisms and their implications for public health.

Phosphorus/Bromine Synergism Improved the Flame Retardancy of Polyethylene Terephthalate Foams

Polyethylene terephthalate (PET) foams have the characteristics of being lightweight and high strength, as well as offering good heat resistance, minimal water absorption, etc., and they have been widely used in the wind power field. In addition, they are being promisingly applied in automotive, rail, marine, construction, and other related fields. Therefore, the flame retardancy(FR) of PET foams is an issue that requires investigation. The addition of flame retardants would affect the chain extension reaction, viscoelasticity, and foamability of PET. In this study, zinc diethyl hypophosphite (ZDP) and decabromodiphenylethane (DBDPE) were used to form a synergistic FR system, in which ZDP is an acid source and DBDPE is a gas source, and both of them synergistically produced an expanded carbon layer to improve the flame retardancy of PET foams. The ratio of ZDP and DBDPE is crucial for the carbon yield and the expansion and thermal stability of the char layers. At the ZDP/DBDPE ratios of 9/3 and 7/5, the thickness of the char layers is about 3-4 mm, the limiting oxygen index (LOI) values of FR modified PET are 32.7% and 33.6%, respectively, and the vertical combustion tests both reached the V-0 level. As for the extruded phosphorous/bromine synergism FR PET foams, ZDP/DBDPE ratios of 3:1 and 2:1 were applied. As a result, the vertical combustion grade of foamed specimens could still reach V-0 grade, and the LOI values are all over 27%, reaching the refractory grade.

Bioaccessibility of halogenated flame retardants and organophosphate esters in settled dust: Influences of specific dust matrices from informal e-waste and end-of-life vehicle processing areas in Vietnam

Bioaccessibility of halogenated flame retardants (HFRs) and organophosphorus esters (OPEs) is necessarily investigated to provide more accurate risk assessment and information about absorption behavior of these pollutants. In this study, total and bioaccessible concentrations of HFRs (including legacy and alternative substances) and OPEs were determined in settled dust samples collected from Vietnamese e-waste and end-of-life vehicle (ELV) processing areas. Concentrations of both HFRs and OPEs were significantly higher in the e-waste dust than ELV dust. Bioavailability of HFRs and OPEs in dust was determined by using an in vitro assay with human-simulated digestive fluids, dialysis membrane, and Tenax® TA sorptive sink. Bioaccessibility of HFRs was markedly lower than that of OPEs, which could be largely due to higher hydrophobicity of HFRs compared to OPEs. Bioaccessibility of almost hydrophobic compounds were markedly lower in the e-waste dust (containing micronized plastic debris) than in the ELV dust (containing oily materials), suggesting the influence of specific dust matrices on pollutant bioaccessibility. Although the daily uptake doses of selected HFRs and OPEs from dust were markedly higher in the e-waste sites compared to the ELV sites, the direct exposure risk was not significant. Our results suggest that bioaccessibility can partly explain the differences between dust and uptake profiles, which may relate to accumulation profiles of HFRs and OPEs in human samples.

Probing the Thermochemistry Properties and Rate Kinetics of Trimethyl Phosphate (TMP): An H-Atom Abstraction (HAA) Reactions Perspective

Trimethyl Phosphate (TMP), an organophosphorus liquid compound, is valued for its versatile qualities and applications in various fields. In modern chemical research and industry, processes involving Trimethyl Phosphate are optimized for minimal negative environmental impact, and scientific advancement is driven by adherence to stringent regulations to provide sustainable solutions and resource preservation. Thermochemical insights enhance our understanding of monomer incorporation, initiation, and propagation energetics. This study comprehensively investigates the thermochemistry and rate kinetics that govern H-atom abstractions in TMP through advanced computational techniques. The theoretical framework encompasses methodologies for conducting conformer searches, exploring transition states, and performing energy calculations. This study calculates rate constants for eight H-atom abstraction reactions involving TMP with stable species, O2 (oxygen), H (hydrogen), and radicals [ȮH (hydroxyl), ĊH3 (methyl), CH3Ȯ (methoxy), HȮ2 (hydroperoxyl), ṄH2 (amino), and ĊN (cyano)], and further analogies are related to barrier heights. Bond dissociation energies are also determined, highlighting TMP's susceptibility to various reaction pathways. The discussion and findings elucidate the need for further experimental validation for practical applications of TMP in chemical synthesis, combustion, flame-retardant technologies, environmental processes, and pharmaceutical research.

Toxic trespassers: Uncovering phthalates and organophosphate flame retardants in children's rooms and their health implications

Organophosphate flame retardants (OPEs) and phthalates have garnered significant attention due to their widespread presence in indoor environments. Many recent investigations have reported extensive contamination of indoor dust, air, children's toys, and other environmental compartments with these chemicals. This research aimed to analyze OPEs and phthalates in air (PM10) and dust samples collected from the bedrooms of children (N = 30) residing in various households in Jeddah, Saudi Arabia. High mean levels (ng/g) of phthalates namely DEHP (1438600) and DnBP (159200) were found in indoor dust while TPhP (5620) was the major OPEs in indoor dust. Similarly, DEHP and DnBP were the predominant phthalates in PM10 samples, exhibiting mean levels of 560 and 680 ng/m3, respectively. However, TCPP was the main OPEs with average levels of 72 ng/m3 in PM10 samples. The majority of individual phthalates and OPEs were detected in 90-100 % of the dust samples, whereas in PM10 samples, their presence ranged from 25 % to 100 %. The concentrations of OPEs were notably greater than those of PBDEs and other BFRs previously reported in these samples, suggesting their broader use than alternative BFRs. The estimated long-term non-carcinogenic risk, hazardous index (HI) and daily exposure via dust for children was above threshold levels for DEHP. On the other hand, the cumulative risk of cancer was below the concerning levels. Further research is required to explore diverse groups of chemicals in indoor microenvironments particularly significant for children, such as kindergartens, primary schools, and their rooms at home.

Hexabromocyclododecane (HBCD) induced PANoptosis of chondrocytes via activation of the NLRP3 inflammasome and decreased the exercise ability of mice in vivo

Hexabromocyclododecane (HBCD) is a persistent organic pollutant (POP). HBCD is found in the blood and tissues of most populations and causes a range of toxicological damage to tissues and cells. However, the toxicological effects of HBCD on chondrocytes are not fully understood. Here, we evaluated the toxicological effects of HBCD on chondrocytes and cartilaginous tissue. For this, a model of primary cartilage cells was established. Chondrocytes were exposed to different concentrations of HBCD. Western blot, indirect immunofluorescence, ELISA and other biochemical experiments were performed to analyze the toxicological effects of HBCD on chondrocytes/articular cartilage tissue. Cell proliferation assays showed that HBCD caused a reduction in the proliferative capacity of chondrocytes, and further work indicated that HBCD induces chondrocyte death. Further experiments demonstrated that HBCD caused an inflammatory response in chondrocytes by evaluating the levels of inflammatory factors. We found that HBCD led to PANoptosis in chondrocytes by detecting panapoptosis-related marker molecules, and experimental data indicated that apoptosis markers (cleaved caspase-3/7), pyroptosis markers (caspase-1/GSDMD-N) and necroptosis markers (pMLKL/RIPK3) were upregulated after HBCD treatment. Subsequent experiments illustrated that HBCD activated the DAMP sensor NLRP3, which then mediated ZBP1-induced PANoptosis. In the in vivo model, the experimental animals were administered HBCD at 25, 50 and 100 µg/kg/week for 15 weeks. We found that HBCD led to an inflammatory response in articular cartilage tissue. The safranin O-fast green assay showed a certain degree of damage to cartilage tissue under HBCD treatment. Furthermore, HBCD resulted in an increase in MMP13 expression and a downregulation of COL2 expression in chondrocytes/cartilaginous tissues. HBCD decreased the exercise ability of mice in vivo. These data indicate that HBCD leads to chondrocyte damage. In summary, this study lays the foundation for further exploration of the toxicological effects of HBCD on bone and joints.

Alternative and legacy flame retardants in marine mammals from three northern ocean regions

Flame retardants are globally distributed contaminants that have been linked to negative health effects in humans and wildlife. As top predators, marine mammals bioaccumulate flame retardants and other contaminants in their tissues which is one of many human-imposed factors threatening population health. While some flame retardants, such as the polybrominated diphenyl ethers (PBDE), have been banned because of known toxicity and environmental persistence, limited data exist on the presence and distribution of current-use alternative flame retardants in marine mammals from many industrialized and remote regions of the world. Therefore, this study measured 44 legacy and alternative flame retardants in nine marine mammal species from three ocean regions: the Northwest Atlantic, the Arctic, and the Baltic allowing for regional, species, age, body condition, temporal, and tissue comparisons to help understand global patterns. PBDE concentrations were 100-1000 times higher than the alternative brominated flame retardants (altBFRs) and Dechloranes. 2,2',4,5,5'-pentabromobiphenyl (BB-101) and hexabromobenzene (HBBZ) were the predominant altBFRs, while Dechlorane-602 was the predominant Dechlorane. This manuscript also reports only the second detection of hexachlorocyclopentadienyl-dibromocyclooctane (HCDBCO) in marine mammals. The NW Atlantic had the highest PBDE concentrations followed by the Baltic and Arctic which reflects greater historical use of PBDEs in North America compared to Europe and greater industrialization of North America and Baltic countries compared to the Arctic. Regional patterns for other compounds were more complicated, and there were significant interactions among species, regions, body condition and age class. Lipid-normalized PBDE concentrations in harbor seal liver and blubber were similar, but HBBZ and many Dechloranes had higher concentrations in liver, indicating factors other than lipid dynamics affect the distribution of these compounds. The health implications of contamination by this mixture of compounds are of concern and require further research.

Contamination characteristics and potential health risk of brominated flame retardants in paddy soils and rice plants around a typical e-waste recycling site in south China

Brominated flame retardants (BFRs) are widely used in various productions. As typical BFRs, polybrominated diphenyl ethers (PBDEs) are prohibited because of their toxicity and persistence. Some of the alternatives to PBDEs, new brominated flame retardants (NBFRs), have also been found in the environment and some have assigned hazardous properties and were categorized as persistent. In this study, a typical e-waste dismantling area was chosen as the study area, and the soil and rice samples were collected from the paddy fields around the circular economy park in Guiyu, China. The contaminations of PBDEs and NBFRs in soils and rice plants were detected, and the health risks associated with consumption and exposure to the environment were calculated as well. The concentrations of ∑PBDEs and ∑NBFRs in soil ranged from 283 to 928 μg/kg and 54.7-437 μg/kg, respectively. In rice plants, the majority of BFRs were concentrated in the following order: root > leaf > stem > grain. Additionally, only the PBT exhibited a stronger bioaccumulation ability in rice with the bioconcentration factors more than 1.00. The results of the health quotient calculation shown that BDE-47 might have an impact on people's health that only the HQ of BDE-47 in the soil was higher than 1.00, while there had no significant health risk in grain of BFRs. We believe that our work could assist researchers in investigating and revealing the human health effects of BFRs in soil and rice.

Recent advances in flame retardant and mechanical properties of polylactic acid: A review

The large-scale application of ecofriendly polymeric materials has become a key focus of scientific research with the trend toward sustainable development. Mechanical properties and fire safety are two critical considerations of biopolymers for large-scale applications. Polylactic acid (PLA) is a flammable, melt-drop carrying, and strong but brittle polymer. Hence, it is essential to achieve both flame retardancy and mechanical enhancement to improve safety and broaden its application. This study reviews the recent research on the flame retardant functionalization and mechanical reinforcement of PLA. It classifies PLA according to the type of the flame retardant strategy employed, such as surface-modified fibers, modified nano/micro fillers, small-molecule and macromolecular flame retardants, flame retardants with fibers or polymers, and chain extension or crosslinking with other flame retardants. The functionalization strategies and main parameters of the modified PLA systems are summarized and analyzed. This study summarizes the latest advances in the fields of flame retardancy and mechanical reinforcement of PLA.

Occurrence of meso/micro/nano plastics and plastic additives in food from food packaging

This chapter focuses on the occurrence of plastic constituents in food due to the contact with different types of plastic packaging, films and coatings. The type of mechanisms occurring during the contamination of food by different packaging materials are described, as well as how the type of food and packaging may influences the extent of contamination. The main types of contaminants phenomena are considered and comprehensively discussed, along with the regulations in force for the use of plastic food packaging. In addition, the types of migration phenomena and factors that may influence such migration are comprehensively highlighted. Moreover, migration components related to the packaging polymers (monomers and oligomers) and the packaging additives are individually discussed in terms of chemical structure, adverse effects on foodstuffs, health, migration factors, as well as regulated residual values of such components.

Occurrence and tissue-specific partitioning of alternative brominated flame retardants in northwest Atlantic harbor seal pups (Phoca vitulina vitulina)

Brominated flame retardants such as polybrominated diphenyl ethers (PBDEs) have been used for decades until evidence of negative health effects led to bans in many countries. PBDEs have since been replaced by alternative legacy compounds or newly developed chemicals. In this study, eight alternative brominated flame retardants were analyzed in blubber and liver of harbor seal pups (≤6 months) from the Northwest Atlantic collected during 2001-2010 to elucidate concentrations, patterns, contamination trends, potential maternal transfer, and tissue partitioning. All compounds were detected in liver and blubber tissues with hexabromocyclododecane (HBCD) isomers and 2-ethylhexyl 2,3,4,5-tetrabromobenzoate (TBB) predominating. Overall, α-HBCD was the dominant HBCD isomer in both tissues although the concentrations of γ-HBCD exceeded those of α-HBCD in seven pups, indicating their mothers may have had alternative dietary patterns or recent exposure to the commercial mixture. Although it was detected in less than half of the samples, to our knowledge, this is the first study to report tetrabromobisphenol A (TBBPA) concentrations in multiple tissues of a top marine predator. For the brominated components of Firemaster® flame retardants, TBB concentrations exceeded bis-(2-ethylhexyl)-tetrabromophthalate (TBPH). This pattern may result from recent exposure to commercial mixtures in which TBB exceeds TBPH 4:1 or from differences in perinatal or lactational transfer efficiency of the two compounds. Between the two tissues, lipid-normalized β-HBCD, γ-HBCD, TBB and decabromodiphenyl ethane (DBDPE) concentrations were significantly higher in liver than blubber. This indicates that the bioaccumulation of these chemicals is not simply related to lipid dynamics but may be linked to blood proteins. This study demonstrates that harbor seal pups from this region are contaminated with alternative flame retardants passed to them via placental or lactational transfer. Given the evidence for negative health effects of these chemicals, this contamination adds additional pressure on the first year survival of these young, developing animals.

Research and Application of Biomass-Based Wood Flame Retardants: A Review

Wood is widely used as a construction material due to its many advantages, such as good mechanical properties, low production costs, and renewability. However, its flammability limits its use in construction. To solve the problem of wood flammability, the most common method to improve the fire safety of wood is to modify the wood by deep impregnation or surface coating with flame retardants. Therefore, many researchers have found that environmentally friendly and low-cost biomass materials can be used as a source of green flame retardants. Two aspects of biomass-based intumescent flame retardants are summarized in this paper. On the one hand, biomass is used as one of the three sources or as a flame-retardant synergist in combination with other flame retardants, which are called composite biomass intumescent flame retardants. On the other hand, biomass is used alone as a feedstock to produce all-biomass intumescent flame retardants. In addition, the potential of biomass-based materials as an environmentally friendly and low-cost FR source to produce high-performance biomass-based flame retardants with improved technology was also discussed in detail. The development of biomass-based intumescent flame retardants represents a viable and promising approach for the efficient and environmentally friendly production of biomass-based flame retardants.

Synergistic Flame Retardant Effect between Ionic Liquid-Functionalized Imogolite Nanotubes and Ammonium Polyphosphate in Unsaturated Polyester Resin

Imogolite nanotubes (INTs) were synthesized from tetraethoxysilane, aluminum nitrate nonahydrate, and ammonia solution by the method of Arancibia-Miranda, and their dispersion was modified by 1-butyl-3-methylimidazolium hexafluorophosphate ([BMIM]PF₆) to obtain ionic liquid (IL)-functionalized INTs (INTs-PF₆-ILs). Then, the flame retardant INTs-PF₆-ILs was complexed with ammonium polyphosphate (APP) and applied to unsaturated polyester resin (UPR). The limiting oxygen index value and the UL-94 level of the UPR/APP/INTs-PF₆-ILs composites reached 28 and V-0, respectively. The residual carbon of the composites in thermogravimetric analysis increased by 19.47%, compared with that of pure UPR. The cone calorimeter test result showed that the peak of heat release rate and total heat rate values of the UPR/APP/INTs-PF₆-ILs composites were lowered by 41 and 34% than those of the pure UPR, respectively. The effect of heat combustion and the maximum mass loss rate of UPR/APP/INTs-PF₆-ILs composites were also greatly decreased. There were no holes or folds observed on the surface of the UPR/APP/INTs-PF₆-ILs composites' residual carbon in scanning electron microscopy images. The intact residual carbon could have effectively insulated the heat and oxygen to improve the flame retardant performance.

Improvement of Fire Resistance and Mechanical Properties of Glass Fiber Reinforced Plastic (GFRP) Composite Prepared from Combination of Active Nano Filler of Modified Pumice and Commercial Active Fillers

Glass fiber reinforced plastic (GFRP) composites have great potential to replace metal components in vehicles by maintaining their mechanical properties and improving fire resistance. Ease of form, anti-corrosion, lightweight, fast production cycle, durability and high strength-to-weight ratio are the advantages of GFRP compared to conventional materials. The transition to the use of plastic materials can be performed by increasing their mechanical, thermal and fire resistance properties. This research aims to improve the fire resistance of GFRP composite and maintain its strength by a combination of pumice-based active nano filler and commercial active filler. The nano active filler of pumice particle (nAFPP) was obtained by the sol-gel method. Aluminum trihydroxide (ATH), sodium silicate (SS) and boric acid (BA) were commercial active fillers that were used in this study. The GFRP composite was prepared by a combination of woven roving (WR) and chopped strand mat (CSM) glass fibers with an unsaturated polyester matrix. The composite specimens were produced using a press mold method for controlling the thickness of specimens. Composites were tested with a burning test apparatus, flexural bending machine and Izod impact tester. Composites were also analyzed by SEM, TGA, DSC, FT-IR spectroscopy and macro photographs. The addition of nAFPP and reducing the amount of ATH increased ignition time significantly and decreased the burning rate of specimens. The higher content of nAFPP significantly increased the flexural and impact strength. TGA analysis shows that higher ATH content had a good contribution to reducing specimen weight loss. It is also strengthened by the lower exothermic of the specimen with higher ATH content. The use of SS and BA inhibited combustion by forming charcoal or protective film; however, excessive use of them produced porosity and lowered mechanical properties.

Synergistic Enhancement of Flame Retardancy Behavior of Glass-Fiber Reinforced Polylactide Composites through Using Phosphorus-Based Flame Retardants and Chain Modifiers

Flame retardancy properties of neat PLA can be improved with different phosphorus-based flame retardants (FRs), however, developing flame retardant PLA-based engineering composites with maintained mechanical performance is still a challenge. This study proposes symbiosis approaches to enhance the flame retardancy behavior of polylactide (PLA) composites with 20 wt% short glass fibers (GF). This was first implemented by exploring the effects of various phosphorus-based FRs up to 5 wt% in neat PLA samples. Among the used phosphorus-based FRs, the use of only 3 wt% of diphosphoric acid-based FR (P/N), melamine coated ammonium polyphosphate (APPcoated), and APP with melamine synergist (APP/Mel) resulted in achieving the V0 value in a vertical burning test in the neat PLA samples. In addition to their superior efficiency in improving the flame retardancy of neat PLA, P/N had the least negative effect on the final mechanical performance of PLA samples. When incorporated in PLA composites with 20 wt% GF, however, even with the use of 30 wt% P/N, the V0 value could not be obtained due to the candlewick effect. To resolve this issue, the synergistic effect of P/N and aromatic polycarbodiimide (PCDI) cross-linker or Joncryl epoxy-based chain-extender (CE) on the flame retardancy characteristics of composites was examined. Due to the further chain modification, which also enhances the melt strength of PLA, the dripping of composites in the vertical burning test terminated and the V0 value could be reached when using only 1 wt% PCDI or CE. According to the scanning electron microscopic analysis, the use of noted chain modifiers further homogenized the distribution and refined the particle size of P/N within the PLA matrix. Hence this could synergistically contribute to the enhancements of the fire resistance performance of the PLA composites. Such incorporation of P/N and chain modifiers further leads to the enhancement of the mechanical performance of PLA composites and hence the resultant product can be proposed as a promising durable bioplastic engineering product where fire risk exists.

Thermal Properties and Flammability Characteristics of a Series of DGEBA-Based Thermosets Loaded with a Novel Bisphenol Containing DOPO and Phenylphosphonate Units

Despite a recent sustained preoccupation for developing biobased epoxies with enhanced applicability, such products have not been widely accepted for industry because of their inferior characteristics compared to classic petroleum-based epoxy thermosets. Therefore, significant effort is being made to improve the flame retardance of the most commonly used epoxies, such as diglycidyl ether-based bisphenol A (DGEBA), bisphenol F (DGEBF), novalac epoxy, and others, while continuously avoiding the use of hazardous halogen-containing flame retardants. Herein, a phosphorus-containing bisphenol, bis(4-(((4-hydroxyphenyl)amino)(6-oxido-6H-dibenzo[c,e][1,2]oxaphosphinin-6-yl)methyl)phenyl) phenylphosphonate (BPH), was synthesized by reacting bis(4-formylphenyl)phenylphosphonate with 4-hydroxybenzaldehyde followed by the addition of 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) to the resulting azomethine groups. Environmentally friendly epoxy-based polymer thermosets were prepared by using epoxy resin as polymer matrix and a mixture of BPH and 4,4'-diaminodiphenylsulfone (DDS) as hardeners. A hyperbranched phthalocyanine polymer (HPc) and BaTiO₃ nanoparticles were incorporated into epoxy resin to improve the characteristics of the final products. The structure and morphology of epoxy thermosets were evaluated by infrared spectroscopy and scanning electron microscopy (SEM), while the flammability characteristics were evaluated by microscale combustion calorimetry. Thermal properties were determined by thermogravimetric analysis and differential scanning calorimetry. The surface morphology of the char residues obtained by pyrolysis was studied by SEM analysis.

Profiling of multiple classes of flame retardants in house dust in China: Pattern analysis and human exposure assessment

Legacy [e.g., brominated- (BFRs)] and alternative [e.g., organophosphate- (OPFRs) and nitrogenous- (NFRs)] flame retardants have a propensity to migrate out of consumer products, and thus are dispersed in indoor microenvironments. In this study, simultaneous presence of 11 BFRs, 18 OPFRs and 11 NFRs were measured in house dust collected from Tianjin, China. OPFRs were found at the highest concentrations, with a median value of 3200 ng/g, followed by NFRs (2600) and BFRs (1600). Tris(2-butoxyethyl) phosphate (median: 1800 ng/g), melamine (1100), and BDE-209 (870) were the top three most abundant chemicals in the respective groups. Location-specific patterns of flame retardant concentrations were found with 30%, 20% and 10% of samples were predominated by OPFRs, NFRs and BFRs, respectively, and the remaining samples contained by two or more of the chemical groups occurring concurrently. Network and cluster analysis results indicated the existence of multiple sources of flame retardants in the indoor microenvironment. Estimated human daily intakes via indoor dust ingestion were approximately several tens of ng/kg bw/day and were below their respective reference dose values. Our results indicate widespread occurrence of multiple flame retardant families in indoor dust and suggest need for continued monitoring and efforts to reduce exposures through dust ingestion.

Co-contaminants of microplastics in two seabird species from the Canadian Arctic

Through ingestion and subsequent egestion, Arctic seabirds can bioaccumulate microplastics at and around their colony breeding sites. While microplastics in Arctic seabirds have been well documented, it is not yet understood to what extent these particles can act as transport vehicles for plastic-associated contaminants, including legacy persistent organic pollutants (POPs), trace metals, and organic additives. We investigated the occurrence and pattern of organic and inorganic co-contaminants of microplastics in two seabird species from the Canadian Arctic - northern fulmar (Fulmarus glacialis) and black-legged kittiwake (Rissa tridactyla). We found that fulmars had higher levels of plastic contamination and emerging organic compounds (known to be plastic additives) than kittiwakes, whereas higher concentrations of legacy POPs were found in kittiwakes than the fulmars. Furthermore, fulmars, the species with the much larger foraging range (∼200 km), had higher plastic pollution and overall contaminant burdens, indicating that birds may be acting as long-range transport vectors for plastic-associated pollution. Our results suggest a potential connection between plastic additive contamination and plastic pollution burdens in the bird stomachs, highlighting the importance of treating plastic particles and plastic-associated organic additives as co-contaminants rather than separate pollution issues.

Effects of Phosphorus and Boron Compounds on Thermal Stability and Flame Retardancy Properties of Epoxy Composites

While plastics are regarded as the most resourceful materials nowadays, ranging from countless utilities including protective or decorating coatings, to adhesives, packaging materials, electronic components, paintings, furniture, insulating composites, foams, building blocks and so on, their critical limitation is their advanced flammability, which in fire incidents can result in dramatic human fatalities and irreversible environmental damage. Herein, epoxy-based composites with improved flame-resistant characteristics have been prepared by incorporating two flame retardant additives into epoxy resin, namely 6-(hydroxy(phenyl)methyl)-6H-dibenzo[c,e][1,2]oxaphosphinine-6-oxide (PFR) and boric acid (H₃BO₃). The additional reaction of 9,10-dihydro-oxa-10-phosphophenanthrene-10-oxide (DOPO) to the carbonyl group of benzaldehyde yielded PFR, which was then used to prepare epoxy composites having a phosphorus content ranging from 1.5 to 4 wt%, while the boron content was 2 wt%. The structure, morphology, thermal stability and flammability of resulted epoxy composites were investigated by FTIR spectroscopy, scanning electron microscopy (SEM), thermogravimetric analysis, differential scanning calorimetry, and microscale combustion calorimetry (MCC). Thermogravimetric analysis indicated that the simultaneous incorporation of PFR and H₃BO₃ improved the thermal stability of the char residue at high temperatures. The surface morphology of the char residues, studied by SEM measurements, showed improved characteristics in the case of the samples containing both phosphorus and boron atoms. The MCC tests revealed a significant reduction in flammability as well as a significant decrease in heat release capacity for samples containing both PFR and H₃BO₃ compared to the neat epoxy thermoset.

Distribution and source of and health risks associated with polybrominated diphenyl ethers in dust generated by public transportation

Carcinogenic and neurotoxic polybrominated diphenyl ethers (PBDEs) are environmentally ubiquitous and have been widely investigated. However, little is understood regarding their pollution status, sources, and potential risk to persons in public transportation microenvironments (PTMs). We collected 60 dust samples from PTMs and then selected four materials typical of bus interiors to determine the sources of PBDEs in dust using principal component analysis coupled with Mantel tests. We then evaluated the risk of PBDEs to public health using Monte Carlo simulations. We found that PBDE concentrations in dust were 2-fold higher in buses than at bus stops and that brominated diphenyl ether (BDE)-209 was the main pollutant. The number of buses that passed through a bust stop contributed to the extent of PBDE pollution, and the primary potential sources of PBDEs in dust were plastic handles and curtains inside buses; BDE-209 and BDE-154 were the main contributors of pollution. We found that health risk was 8-fold higher in toddlers than in adults and that the reference doses of PBDEs in dust were far below the United States Environmental Protection Agency limits. Our findings provide a scientific basis that may aid in preventing PBDE pollution and guiding related pollution management strategies in PTMs.

Nanocellulose Removes the Need for Chemical Crosslinking in Tannin-Based Rigid Foams and Enhances Their Strength and Fire Retardancy

Thermal insulation and fire protection are two of the most critical features affecting energy efficiency and safety in built environments. Together with the associated environmental footprint, there is a strong need to consider new insulation materials. Tannin rigid foams have been proposed as viable and sustainable alternatives to expanded polyurethanes, traditionally used in building enveloping. Tannin foams structure result from polymerization with furfuryl alcohol via self-expanding. We further introduce cellulose nanofibrils (CNFs) as a reinforcing agent that eliminates the need for chemical crosslinking during foam formation. CNF forms highly entangled and interconnected nanonetworks, at solid fractions as low as 0.1 wt %, enabling the formation of foams that are ca. 30% stronger and ca. 25% lighter compared to those produced with formaldehyde, currently known as one of the best performers in chemically coupling tannin and furfuryl alcohol. Compared to the those chemically crosslinked, our CNF-reinforced tannin foams display higher thermal degradation temperature (peak shifted upward, by 30-50 °C) and fire resistance (40% decrease in mass loss). Furthermore, we demonstrate partially hydrophobized CNF to tailor the foam microstructure and derived physical-mechanical properties. In sum, green and sustainable foams, stronger, lighter, and more resistant to fire are demonstrated compared to those produced by formaldehyde crosslinking.

Comparison of causes, characteristics and consequences of residential fires in social and non-social housing dwellings in New South Wales, Australia

There are over 17,000 residential fire incidents in Australia annually, of which 6,500 occur in New South Wales (NSW). The number of state-provided accommodations for those on low incomes (social housing), is over 437,000 in Australia of which 34% are located in NSW. This study compared causes, characteristics and consequences of residential fires in social and non-social housing in NSW, Australia. This population-based study used linked fire brigade and health service data to identify those who experienced a residential fire incident from 2005 to 2014. Over the study period, 43,707 residential fires were reported, of which 5,073 (11.6%) occurred in social housing properties. Fires in social housing were more likely to occur in apartments (RR 1.85, 95%CI 1.75-1.96), caused by matches and lighters (RR 1.62, 95%CI 1.51-1.74) and smokers' materials (RR 1.51, 95%CI 1.34 - 1.71). The risk of health service utilisation or hospital admission was 16% (RR 1.16, 95%CI 1.04-1.28) and 25% (RR 1.25, 95%CI 1.02-1.51) higher in social housing respectively. Those aged 25-65 were at 40% (RR 1.40, 95%CI 1.14 - 1.73) higher risk of using residential fire-related health services. Almost 88% of social housing properties did not have a functioning fire detector of any type, and 1.2% were equipped with sprinklers. Overall, the risk of residential fire incidents and associated injuries was higher for residents in social housing. Risk mitigation strategies beyond the current provision of smoke alarms are required to reduce the impact of residential fires in social and non-social housing.

Flame Retardant Coatings: Additives, Binders, and Fillers

This review provides an intensive overview of flame retardant coating systems. The occurrence of flame due to thermal degradation of the polymer substrate as a result of overheating is one of the major concerns. Hence, coating is the best solution to this problem as it prevents the substrate from igniting the flame. In this review, the descriptions of several classifications of coating and their relation to thermal degradation and flammability were discussed. The details of flame retardants and flame retardant coatings in terms of principles, types, mechanisms, and properties were explained as well. This overview imparted the importance of intumescent flame retardant coatings in preventing the spread of flame via the formation of a multicellular charred layer. Thus, the intended intumescence can reduce the risk of flame from inherently flammable materials used to maintain a high standard of living.

Environmental, Health, and Legislation Considerations for Rational Design of Nonreactive Flame-Retardant Additives for Polymeric Materials: Future Perspectives

Increasing polymer usage has demanded functional additives that decrease fire hazards for end users. While traditional flame-retardant (FR) additives, such as halogenated, phosphorus, and metal hydroxides, greatly reduce flammability and associated fire hazards, research has continually exposed a litany of health and environmental safety concerns. This perspective aims to identify the key components of a successful FR additive and address material, environmental, and health concerns of existing additives. Legislation surrounding FRs and persistent organic pollutants is also discussed to highlight political perception that has resulted in the increased chemical regulations and subsequent banning of FR additives. Finally, future directions of this field regarding nonreactive additives, focusing on the use of bioinspired materials and transition metal chemistries to produce alternatives for polymers with efficacies surpassing traditional additives are presented.

Enhancement of Thermal Stability, Conductivity and Smoke Suppression of Polyethylene Composites with Exfoliated MoS2 Functionalized with Magnetite

This work reports a facile fabrication method to modify exfoliated molybdenum disulfide (e-MoS2) nanosheets with magnetite nanoparticles with various size distribution. The obtained materials have been utilized as nanofillers of polyethylene to enhance its thermal properties and flame retardance. The incorporation of magnetite modified MoS2 nanosheets leads to the reduction of the peak heat release rate. The best thermal conductivity has been noticed for composites with e-MoS2/Fe3O4 with 2 wt. % of nanofillers. The lowest CO emission was observed for the PE/e-MoS2 composite containing also 2 wt. % of Fe3O4. All composites with exfoliated MoS2 exhibited greater thermal properties in respect to the pristine polyethylene.

Polyimide Copolymers and Nanocomposites: A Review of the Synergistic Effects of the Constituents on the Fire-Retardancy Behavior

Carbon-based polymer can catch fire when used as cathode material in batteries and supercapacitors, due to short circuiting. Polyimide is known to exhibit flame retardancy by forming char layer in condensed phase. The high char yield of polyimide is attributed to its aromatic nature and the existence of a donor–acceptor complex in its backbone. Fabrication of hybrid polyimide material can provide better protection against fire based on multiple fire-retardancy mechanisms. Nanocomposites generally show a significant enhancement in mechanical, electrical, and thermal properties. Nanoparticles, such as graphene and carbon nanotubes, can enhance flame retardancy in condensed phase by forming a dense char layer. Silicone-based materials can also provide fire retardancy in condensed phase by a similar mechanism as polyimide. However, some inorganic fire retardants, such as phosphazene, can enhance flame retardancy in gaseous phase by releasing flame inhibiting radicals. The flame inhibiting radicals generated by phosphazene are released into the gaseous phase during combustion. A hybrid system constituted of polyimide, silicone-based additives, and phosphazene would provide significant improvement in flame retardancy in both the condensed phase and gas phase. In this review, several flame-retardant polyimide-based systems are described. This review which focuses on the various combinations of polyimide and other candidate fire-retardant materials would shed light on the nature of an effective multifunctional flame-retardant hybrid materials.

Contaminants of emerging concerns in recycled water: Fate and risks in agroecosystems

Recycled water (RW) has been increasingly recognized as a valuable source of water for alleviating the global water crisis. When RW is used for agricultural irrigation, many contaminants of emerging concern (CECs) are introduced into the agroecosystem. The ubiquity of CECs in field soil, combined with the toxic, carcinogenic, or endocrine-disrupting nature of some CECs, raises significant concerns over their potential risks to the environment and human health. Understanding such risks and delineating the fate processes of CECs in the water-soil-plant continuum contributes to the safe reuse of RW in agriculture. This review summarizes recent findings and provides an overview of CECs in the water-soil-plant continuum, including their occurrence in RW and irrigated soil, fate processes in agricultural soil, offsite transport including runoff and leaching, and plant uptake, metabolism, and accumulation. The potential ecological and human health risks of CECs are also discussed. Studies to date have shown limited accumulation of CECs in irrigated soils and plants, which may be attributed to multiple attenuation processes in the rhizosphere and plant, suggesting minimal health risks from RW-fed food crops. However, our collective understanding of CECs is rather limited and knowledge of their offsite movement and plant accumulation is particularly scarce for field conditions. Given a large number of CECs and their occurrence at trace levels, it is urgent to develop strategies to prioritize CECs so that future research efforts are focused on CECs with elevated risks for offsite contamination or plant accumulation. Irrigating specific crops such as feed crops and fruit trees may be a viable option to further minimize potential plant accumulation under field conditions. To promote the beneficial reuse of RW in agriculture, it is essential to understand the human health and ecological risks imposed by CEC mixtures and metabolites.

Endocrine Disruptors and Endometrial Cancer: Molecular Mechanisms of Action and Clinical Implications, a Systematic Review

It has been widely demonstrated that endocrine disruptors play a central role in various physiopathological processes of human health. In the literature, various carcinogenic processes have been associated with endocrine disruptors. A review of the molecular mechanisms underlying the interaction between endocrine disruptors and the endometrial cancer has been poorly developed. A systematic review was performed using PubMed^®/MEDLINE. A total of 25 in vivo and in vitro works were selected. Numerous endocrine disruptors were analyzed. The most relevant results showed how Bisphenol A (BPA) interacts with the carcinogenesis process on several levels. It has been demonstrated how BPA can interact with hormonal receptors and with different transcription proliferative and antiproliferative factors. Furthermore, the effect of Polycyclic aromatic hydrocarbons on Aryl hydrocarbon receptors was investigated, and the role of flame retardants in promoting proliferation and metastasis was confirmed. The results obtained demonstrate how the mechanisms of action of endocrine disruptors are manifold in the pathophysiology of endometrial cancer, acting on different levels of the cancerogenesis process.

Formal waste treatment facilities as a source of halogenated flame retardants and organophosphate esters to the environment: A critical review with particular focus on outdoor air and soil

Extensive use of halogenated flame retardants (HFRs) and organophosphate esters (OPEs) has generated great concern about their adverse effects on environmental and ecological safety and human health. As well as emissions during use of products containing such chemicals, there are mounting concerns over emissions when such products reach the waste stream. Here, we review the available data on contamination with HFRs and OPEs arising from formal waste treatment facilities (including but not limited to e-waste recycling, landfill, and incinerators). Evidence of the transfer of HFRs and OPEs from products to the environment shows that it occurs via mechanisms such as: volatilisation, abrasion, and leaching. Higher contaminant vapour pressure, increased temperature, and elevated concentrations of HFRs and OPEs in products contribute greatly to their emissions to air, with highest emission rates usually observed in the early stages of test chamber experiments. Abrasion of particles and fibres from products is ubiquitous and likely to contribute to elevated FR concentrations in soil. Leaching to aqueous media of brominated FRs (BFRs) is likely to be a second-order process, with elevated dissolved humic matter and temperature of leaching fluids likely to facilitate such emissions. However, leaching characteristics of OPEs are less well-understood and require further investigation. Data on the occurrence of HFRs and OPEs in outdoor air and soil in the vicinity of formal e-waste treatment facilities suggests such facilities exert a considerable impact. Waste dumpsites and landfills constitute a potential source of HFRs and OPEs to soil, and improper management of waste disposal might also contribute to HFR contamination in ambient air. Current evidence suggests minimal impact of waste incineration plants on BFR contamination in outdoor air and soil, but further investigation is required to confirm this.

Spatiotemporal Distribution and Analysis of Organophosphate Flame Retardants in the Environmental Systems: A Review

In recent times, there has been a cumulative apprehension regarding organophosphate flame retardants (OPFRs) owing to their high manufacturing and usage after brominated flame retardants were strictly regulated and banned from being distributed and used in many countries. OPFRs are known as the main organic pollutants in the terrestrial and aquatic environment. They are very dangerous to humans, plants and animals. They are also carcinogenic and some have been implicated in neurodevelopmental and fertility challenges. OPFRs are distributed into the environment through a number of processes, including the usage, improper disposal and production of materials. The solid phase extraction (SPE) method is suggested for the extraction of OPFRs from water samples since it provides high quality recoveries ranging from 67% to 105% and relative standard deviations (RSDs) below 20%. In the same vein, microwave-assisted extraction (MAE) is highly advocated for the extraction of OPFRs from sediment/soil. Recoveries in the range of 78% to 105% and RSDs ranging from 3% to 8% have been reported. Hence, it is a faster method of extraction for solid samples and only demands a reduced amount of solvent, unlike other methods. The extract of OPFRs from various matrices is then followed by a clean-up of the extract using a silica gel packed column followed by the quantification of compounds by gas chromatography coupled with a mass spectrometer (GC–MS) or a flame ionization detector (GC-FID). In this paper, different analytical methods for the evaluation of OPFRs in different environmental samples are reviewed. The effects and toxicities of these contaminants on humans and other organisms are also discussed.

Modification of Glass/Polyester Laminates with Flame Retardants

This paper presents a review of flame retardants used for glass/polyester laminates. It concerns flame retardants withdrawn from use such as compounds containing halogen atoms and flame retardants currently used in the industry, such as inorganic hydroxides, phosphorus and nitrogen-containing compounds, antimony, and boron compounds, as well as tin–zinc compounds. Attention is also drawn to the use of nanoclays and the production of nanocomposites, intumescent flame retardant systems, and mats, as well as polyhedral oligomeric silsesquioxanes. The paper discusses the action mechanism of particular flame retardants and presents their advantages and disadvantages.

Using In Vitro and Machine Learning Approaches to Determine Species-Specific Dioxin-like Potency and Congener-Specific Relative Sensitivity among Birds for Brominated Dioxin Analogues

There is a paucity of experimental data regarding dioxin-like toxicity of polybrominated dibenzo-p-dioxins/dibenzofurans (PBDD/Fs) and non-ortho polybrominated biphenyls (PBBs). In this study, avian aryl hydrocarbon receptor 1 (AHR1)-luciferase reporter gene assays were used to determine their species-specific dioxin-like potencies (DLPs) and congener-specific interspecies relative sensitivities in birds. The results suggested that DLPs of the brominated congeners for chicken-like (Ile324_Ser380) species did not always follow World Health Organization toxicity equivalency factors of their chlorinated analogues. For ring-necked pheasant-like (Ile324_Ala380) and Japanese quail-like (Val324_Ala380) species, the difference in DLP for several congeners was 1 or even 2 orders of magnitude. Moreover, molecular docking and molecular dynamics simulation were performed to explore the interactions between the brominated congeners and AHR1-ligand-binding domain (LBD). The molecular mechanics energy (E_MM) between each congener and each individual amino acid (AA) residue in AHR1-LBD was calculated. These E_MM values could finely characterize the final conformation of species-specific AHR1-LBD for each brominated congener. Based on this, mechanism-driven generalized linear models were successfully built using machine learning algorithms and the spline approximation method, and these models could qualitatively predict the complex relationships between AHR1 conformations and DLPs or avian interspecies relative sensitivity to brominated dioxin-like compounds (DLCs). In addition, several AAs conserved among birds were found to potentially interact with species-specific AAs, thereby inducing species-specific interactions between AHR1 and brominated DLCs. The present study provides a novel strategy to facilitate the development of mechanism-driven computational prediction models for supporting safety assessment of DLCs, as well as a basis for the ecotoxicological risk assessment of brominated congeners in birds.

An adverse outcome pathway based in vitro characterization of novel flame retardants-induced hepatic steatosis

A wide range of novel replacement flame retardants (nFRs) is consistently detected in increasing concentrations in the environment and human matrices. Evidence suggests that nFRs exposure may be associated with disruption of the endocrine system, which has been linked with the etiology of various metabolic disorders, including nonalcoholic fatty liver disease (NAFLD). NAFLD is a multifactorial disease characterized by the uncontrolled accumulation of fats (lipids) in the hepatocytes and involves multiple-hit pathogenesis, including exposure to occupational and environmental chemicals such as organophosphate flame retardants (OPFRs). In the present study we aimed to investigate the potential mechanisms of the nFRs-induced hepatic steatosis in the human liver cells. In this study, we employed an in vitro bioassay toolbox to assess the key events (KEs) in the proposed adverse outcome pathways (AOP) (s) for hepatic steatosis. We examined nine nFRs using AOP- based in vitro assays measuring KEs such as lipid accumulation, mitochondrial dysfunction, gene expression, and in silico approach to identify the putative molecular initiating events (MIEs). Our findings suggest that several tested OPFRs induced lipid accumulation in human liver cell culture. Tricresyl phosphate (TMPP), triphenyl phosphate (TPHP), tris(1,3-dichloropropyl) phosphate (TDCIPP), and 2-ethylhexyl diphenyl phosphate (EHDPP) induced the highest lipid accumulation by altering the expression of genes encoding hepatic de novo lipogenesis and mitochondrial dysfunction depicted by decreased cellular ATP production. Available in vitro data from ToxCast and in silico molecular docking suggests that pregnane X receptor (PXR) and peroxisome proliferator-activated receptor gamma (PPARγ) could be the molecular targets for the tested nFRs. The study identifies several nFRs, such as TMPP and EHDPP, TPHP, and TDCIPP, as potential risk factor for NAFLD and advances our understanding of the mechanisms involved, demonstrating the utility of an AOP-based strategy for screening and prioritizing chemicals and elucidating the molecular mechanisms of toxicity.

Novel trends in the thermo-chemical recycling of plastics from WEEE containing brominated flame retardants

The amount of plastics from waste electric and electronic equipment (WEEE) has enormously increased nowadays, due to the rapid expansion and consumption of electronic devices and their short lifespan. This, in combination with their non-biodegradability, led to the need to explore environmentally friendly solutions for their safe disposal. One main obstacle when recycling plastics from WEEE is that they usually comprise harmful additives such as brominated flame retardants (BFRs) that need to be removed before or during their recycling. This paper reviews existing techniques for the recycling of plastics from WEEE and focuses specifically on the advantages, disadvantages, and challenges of pyrolysis as an environmentally friendly method for the production of value-added materials (monomers, hydrocarbons, phenols, etc.). Current technological trends available for the recycling of plastics containing brominated flame retardants are reviewed in an attempt to provide insights for future research on the sustainable management of plastics from WEEE. Emphasis is given on conventional pyrolysis, where a pretreatment step for the debromination of products is applied. This is required since brominated compounds treated at high temperatures may result in the production of harmful to health compounds such as dioxins. All current pretreatment methods (solvent extraction, supercritical fluid technology, etc.) are presented and compared in detail. Co-pyrolysis is also investigated, as it seems to be a very interesting approach, since no catalysts or solvents are used, and at the same time, more plastic wastes can be consumed as feedstock. Furthermore, catalytic pyrolysis along with key parameters, such as the type of the catalyst or pyrolysis temperature, are fully analyzed. Catalysts affect the products' distribution and enhance the removal of bromine from pyrolysis oils. Finally, an emerging technique, that of microwave-assisted pyrolysis, is also highlighted, as it offers many advantages over conventional pyrolysis. Of course, there are some impediments, such as the operational costs or other difficulties as regards the industrial implementation of the mentioned techniques that need to be overcome through future works.

Assessment of Pre-Treatment Techniques for Coarse Printed Circuit Boards (PCBs) Recycling

Waste electrical and electronic equipment or e-waste generation has been skyrocketing over the last decades. This poses waste management and value recovery challenges, especially in developing countries. Printed circuit boards (PCBs) are mainly employed in value recovery operations. Despite the high energy costs of generating crushed and milled particles of the order of several microns, those are employed in conventional hydrometallurgical techniques. Coarse PCB pieces (of order a few centimetres) based value recovery operations are not reported at the industrial scale as the complexities of the internal structure of PCBs limit efficient metal and non-metal separation. Since coarse PCB particles’ pre-treatment is of paramount importance to enhance metal and non-metal separations, thermal, mechanical, chemical and electrical pre-treatment techniques were extensively studied. It is quite evident that a single pre-treatment technique does not result in complete metal liberation and therefore several pre-treatment flowsheets were formulated for coarse PCB particles. Thermal, mechanical and chemical pre-treatments integrated flowsheets were derived and such flowsheets are seldom reported in the e-waste literature. The potential flowsheets need to be assessed considering socio-techno-economic considerations to yield the best available technologies (BAT). In the wider context, the results of this work could be useful for achieving the United Nations sustainable development goals.

Health toxicity effects of brominated flame retardants: From environmental to human exposure

Hexabromocyclododecane (HBCD) and Tetrabromobisphenol A (TBBP-A) are brominated flame retardants widely used in variety of industrial and consumer products (e.g., automobiles, electronics, furniture, textiles and plastics) to reduce flammability. HBCD and TBBPA can also contaminate the environment, mainly water, dust, air and soil, from which human exposure occurs. This constant exposure has raised some concerns against human health. These compounds can act as endocrine disruptors, a property that gives them the ability to interfere with hormonal function and quantity, when HBCD and TBBPA bind target tissues in the body. Studies in human and animals suggest a correlation between HBCD and TBBPA exposure and adverse health outcomes, namely thyroid disorders, neurobehavior and development disorders, reproductive health, immunological, oncological and cardiovascular diseases. However, in humans these effects are still poorly understood, once only a few data evaluated the human health effects. Thus, the purpose of this review is to present the toxicity effects of HBCD and TBBPA and how these compounds affect the environment and health, resorting to data and knowledge of 255 published papers from 1979 to 2020.

Halogen-Free Flame Retardant Polypropylene Fibers with Modified Intumescent Flame Retardant: Preparation, Characterization, Properties and Mode of Action

A novel intumescent flame retardant (IFR) agent designated as Dohor-6000A has been used to prepare halogen-free flame retardant polypropylene (PP) fibers via melting spinning. Before being blended with PP resin, a surface modification of Dohor-6000A was carried out to improve its compatibility with the PP matrix. The rheological behavior of flame retardant Dohor-6000A/PP resin, the structure, morphology, mechanical properties, flammability of the Dohor-6000A/PP fibers were studied in detail, as well as the action mode of flame retardant. X-ray diffraction (XRD) showed that the addition of Dohor-6000A did not damage the crystal as well as the orientation structure of PP matrix, which was helpful to the maintenance of mechanical properties. The presence of the IFR significantly improved the flame retardant performance and thermal stability of PP fibers. When the content of Dohor-6000A reached 25%, the fibers displayed a limiting oxygen index (LOI) value of 29.1% and good melt-drop resistance. Moreover, the peak heat release rate (PHRR) and total heat release (THR) from microscale combustion colorimetry (MCC) tests were decreased by 26.0% and 16.0% in comparison with the same conditions for pure PP fibers. In the condensed phase, the IFR promoted a carbonization process and promoted the formation of a glassy or stable foam protective layer on the surface of the polymer matrix. In addition, the IFR decomposed endothermically to release of non-combustible gases such as NH₃ and CO₂ which dilutes the combustible gases in the combustion zone.

Evaluation of polybrominated diphenyl ether (PBDE) flame retardants from various materials in professional seating furnishing wastes from French flows

Polybrominated diphenyl ethers (PBDEs) are brominated flame retardants that are used in polymeric materials. Due to their adverse health effects, the use of recycled wastes has been forbidden if the total PBDE content exceeds 0.1% (w/w). The objective was to estimate the proportion of PBDEs in professional seating furnishing wastes to identify the materials in which the content of PBDEs (and particularly BDE-209) could exceed the limit to eliminate them from recycling. An analytical process (microwave extraction followed by purification and chromatographic analysis) was adapted to assess with a unique methodology the amounts of eight PBDEs in materials that result from various seating wastes, such as hard plastics, foams and accompanying textiles. X-ray fluorescence (XRF) was used to rapidly predict critical PBDE concentrations via Br. From 100 samples, the total PBDE content did not exceed the current tolerated threshold. The examined materials contained only trace levels of former PBDE formulations, and BDE-209 was identified at higher amounts, mainly in hard plastics, but these amounts were less than 312 mg kg^-1. Since XRF was not reliable for quantitative measurements and was not specific, no direct correlation could be identified between Br and PBDE levels. Br was strongly associated with As in all the materials, but the presence of PBDEs was not clearly associated with the presence of other metals that are used in flame retardants.

A direct foaming approach for carbon nanotube aerogels with ultra-low thermal conductivity and high mechanical stability

Thermally insulating materials (TIMs) with ultra-low thermal conductivity, fire-retardancy, and mechanical stability are demanded to improve energy efficiency in many fields, such as petrochemical plants, energy-saving buildings, and aerospace. However, traditional polymer-based TIMs could not meet these demands. Herein, we propose a direct foaming strategy for obtaining carbon nanotube (CNT) aerogels by the gradual expansion of CNT films with H2O2 as a foaming agent at room temperature. The obtained CNT aerogels have hierarchical cellular structures and possess an ultra-low density (4.6 mg cm-3) and thermal conductivity (16.5 mW m-1 K-1) as well as excellent mechanical robustness and fire-resistance. Our results show that such CNT aerogels have promising applications in the field of thermal insulation and present a facile pathway for the design of thermally insulating, fire-retardant materials based on CNTs.

Study and Use of Rice Husk Ash as a Source of Aluminosilicate in Refractory Coating

The utilisation of rice husk ash (RHA) as an aluminosilicate source in fire-resistant coating could reduce environmental pollution and can turn agricultural waste into industrial wealth. The overall objective of this research is to develop a rice-husk-ash-based geopolymer binder (GB) fire-retardant additive (FR) for alkyd paint. Response surface methodology (RSM) was used to design the experiments work, on the ratio of RHA-based GB to alkyd paint. The microstructure behaviour and material characterisation of the coating samples were studied through SEM analysis. The optimal RHA-based GB FR additive was formulated at 50% wt. FR and 82.628% wt. paint. This formulation showed the result of 270 s to reach 200 °C and 276 °C temperature at equilibrium for thermal properties. Furthermore, it was observed that the increased contents of RHA showed an increment in terms of the total and open porosities and rough surfaces, in which the number of pores on the coating surface plays an important role in the formation of the intumescent char layer. By developing the optimum RHA-based GB to paint formulation, the coating may potentially improve building fire safety through passive fire protection.

Brominated Flame Retardants in Children's Room: Concentration, Composition, and Health Risk Assessment

Children spend most of their daily time indoors. Many of the items used indoors, such as furniture, electronics, textile, and children toys, are treated with chemicals to provide longevity and fulfil the safety standards. However, many chemicals added to these products are released into the environment during leaching out from the treated products. Many studies have reported brominated flame retardants (BFRs) in indoor environments; however, few have focused on environments specified for young children. In this study, paired air (PM₁₀) and dust samples were collected from the rooms (n = 30) of Saudi children. These samples were analyzed for different congeners of polybrominated diphenyl ethers (PBDEs) and three important alternative flame retardants using gas chromatography-mass spectrometry. Decabromodiphenyl ether (BDE 209) was the most important analyzed BFR in dust and PM₁₀ samples with a median value of 3150 ng/g of dust and 75 pg/m³. This indicates the wider application of BDE 209 has implications for its occurrence, although its use has been regulated for specified uses since 2014. Among alternative BFRs, 2-Ethylhexyl-2,3,4,5-tetrabromobenzoate (TBB), Bis(2-ethylhexyl)-3,4,5,6-tetrabromophthalate (TBPH), and 1,2-Bis(2,4,6-tribromophenoxy)ethane (BTBPE) were found with a median levels of 10, 15 and 8 ng/g of dust, respectively. However, alternative BFRs were present in <50% of the PM₁₀ samples. The calculated long term and daily exposures via indoor dust and PM₁₀ of Saudi children from their rooms were well below the respective reference dose (RfD) values. Nonetheless, the study highlights BDE 209 at higher levels than previously reported from household dust in Saudi Arabia. The study warrants further extensive research to estimate the different classes of chemical exposure to children from their rooms.