Controlled release of therapeutics using interpenetrating polymeric networks

Multifunctioning of carboxylic-cellulose nanocrystals on the reinforcement of compressive strength and conductivity for acrylic-based hydrogel

Simultaneously having competitive compressive properties, fatigue-resistant stability, excellent conductivity and sensitivity has still remained a challenge for acrylic-based conductive hydrogels, which is critical in their use in the sensor areas where pressure is performed. In this work, an integrated strategy was proposed for preparing a conductive hydrogel based on acrylic acid (AA) and sodium alginate (SA) by addition of carboxylic-cellulose nanocrystals (CNC-COOH) followed by metal ion interaction to reinforce its compressive strength and conductivity simultaneously. The CNC-COOH played a multifunctional role in the hydrogel by well-dispersing SA and AA in the hydrogel precursor solution for forming a uniform semi-interpenetrating network, providing more hydrogen bonds with SA and AA, more -COOH for metal ion interactions to form uniform multi-network, and also offering high modulus to the final hydrogel. Accordingly, the as-prepared hydrogels showed simultaneous excellent compressive strength (up to 3.02 MPa at a strain of 70 %) and electrical conductivity (6.25 S m-1), good compressive fatigue-resistant (93.2 % strength retention after 1000 compressive cycles under 50 % strain) and high sensitivity (gauge factor up to 14.75). The hydrogel strain sensor designed in this work is capable of detecting human body movement of pressing, stretching and bending with highly sensitive conductive signals, which endows it great potential for multi-scenario strain sensing applications.

Degradable Polymeric Bio(nano)materials and Their Biomedical Applications: A Comprehensive Overview and Recent Updates

Degradable polymers (both biomacromolecules and several synthetic polymers) for biomedical applications have been promising very much in the recent past due to their low cost, biocompatibility, flexibility, and minimal side effects. Here, we present an overview with updated information on natural and synthetic degradable polymers where a brief account on different polysaccharides, proteins, and synthetic polymers viz. polyesters/polyamino acids/polyanhydrides/polyphosphazenes/polyurethanes relevant to biomedical applications has been provided. The various approaches for the transformation of these polymers by physical/chemical means viz. cross-linking, as polyblends, nanocomposites/hybrid composites, interpenetrating complexes, interpolymer/polyion complexes, functionalization, polymer conjugates, and block and graft copolymers, are described. The degradation mechanism, drug loading profiles, and toxicological aspects of polymeric nanoparticles formed are also defined. Biomedical applications of these degradable polymer-based biomaterials in and as wound dressing/healing, biosensors, drug delivery systems, tissue engineering, and regenerative medicine, etc., are highlighted. In addition, the use of such nano systems to solve current drug delivery problems is briefly reviewed.

An Antibiotic-Loaded Silicone-Hydrogel Interpenetrating Polymer Network for the Prevention of Surgical Site Infections

Surgical site infections (SSIs) are among the most frequent healthcare-associated infections, resulting in high morbidity, mortality, and cost. While correct hygiene measures and prophylactic antibiotics are effective in preventing SSIs, even in modern healthcare settings where recommended guidelines are strictly followed, SSIs persist as a considerable problem that has proven hard to solve. Surgical procedures involving the implantation of foreign bodies are particularly problematic due to the ability of microorganisms to adhere to and colonize the implanted material and form resilient biofilms. In these cases, SSIs may develop even months after implantation and can be difficult to treat once established. Locally applied antibiotics or specifically engineered implant materials with built-in antibiotic-release properties may prevent these complications and, ultimately, require fewer antibiotics compared to those that are systemically administered. In this study, we demonstrated an antimicrobial material concept with intended use in artificial vascular grafts. The material is a silicone-hydrogel interpenetrating polymer network developed earlier for drug-release catheters. In this study, we designed the material for permanent implantation and tested the drug-loading and drug-release properties of the material to prevent the growth of a typical causative pathogen of SSIs, Staphylococcus aureus. The novelty of this study is demonstrated through the antimicrobial properties of the material in vitro after loading it with an advantageous combination, minocycline and rifampicin, which subsequently showed superiority over the state-of-the-art (Propaten) artificial graft material in a large-animal study, using a novel porcine tissue-implantation model.

Advanced injectable hydrogels for cartilage tissue engineering

The rapid development of tissue engineering makes it an effective strategy for repairing cartilage defects. The significant advantages of injectable hydrogels for cartilage injury include the properties of natural extracellular matrix (ECM), good biocompatibility, and strong plasticity to adapt to irregular cartilage defect surfaces. These inherent properties make injectable hydrogels a promising tool for cartilage tissue engineering. This paper reviews the research progress on advanced injectable hydrogels. The cross-linking method and structure of injectable hydrogels are thoroughly discussed. Furthermore, polymers, cells, and stimulators commonly used in the preparation of injectable hydrogels are thoroughly reviewed. Finally, we summarize the research progress of the latest advanced hydrogels for cartilage repair and the future challenges for injectable hydrogels.

NANOCOMPOSITES BASED ON SINGLECOMPONENT AND MULTICOMPONENT POLYMER MATRICES FOR BIOMEDICAL APPLICATIONS

The review is devoted to analysis of the publications in the area of polymers of biomedical applications. Different types of the polymer matrices for drug delivery are analyzed, including polyurethanes, hydroxyacrylates, and multicomponent polymer matrices, which created by method of interpenetrating polymer networks. Particular attention is paid to description of synthesized and investigated nanocomposites based on polyurethane / poly (2-hydroxyethyl methacrylate) polymer matrix and nanooxides modified by biologically active compounds.

Poly(vinyl alcohol) membranes-inspired heterocyclic compounds for different applications: synthesis and characterization

Chemical modification of poly(vinyl alcohol) (PVA) with different monomers is a convention method for the development of its properties. In this study, the new multifunctional membranes (PVA-A)1–3, (PVA-P)1–3, (PVA-AG) and (PVA-PG) were designed and synthesized by the reaction of PVA with heterocyclic compounds [N,Nʹ-bi-α-azido succinimide (A), N-phthalimido-α-azido succinimide (P)] and using glutaraldehyde (G) as cross-linker, respectively. The new membranes were characterized by FT-IR, TGA, SEM and X-ray diffraction. The swelling behavior of the membranes showed that membranes (PVA-P)1–3 exhibited the highest swelling capacity in different solvents. Their antibacterial against (Gram-negative), (Gram-positive) bacteria, and in vitro drug loading and release activities were evaluated. Additionally, metal ions adsorption capacity for copper, cobalt and mercury ions was studied. (PVA-AG) membrane performed the highest inhibitory effect to E. coli, Proteus, S. aureus and B. subtilis bacteria reached 22.9, 25.46, 24.9 and 30.56, respectively. Furthermore, in vitro controlled loading and release of lidocaine, (PVA-A)1 membrane revealed remarkable ability reached 57.37% and 94.59%, respectively. Hydrogel (PVA-AG) showed the highest metal ions (copper, cobalt and mercury) uptake efficiency (64.5, 69.5 and 73), respectively. Based on results, the prepared membranes can be suggested as promising agents for antibacterial, drug delivery systems and metal ions removal from aqueous medium.

A Novel Device-Integrated Drug Delivery System for Local Inhibition of Urinary Tract Infection

Background: Catheter-associated urinary tract infection (CAUTI) is a frequent community-acquired infection and the most common nosocomial infection. Here, we developed a novel antimicrobial catheter concept that utilizes a silicone-based interpenetrating polymer network (IPN) as balloon material to facilitate a topical slow-release prophylaxis of antibacterial agents across the balloon to the urinary bladder.

Methods: The balloon material was achieved by modifying low shore hardness silicone tubes with a hydrogel interpenetrating polymer in supercritical CO₂ using the sequential method. Release properties and antibacterial efficacy of the IPN balloon treatment concept was investigated in vitro and in a porcine CAUTI model developed for the study. In the latter, Bactiguard Infection Protection (BIP) Foley catheters were also assessed to enable benchmark with the traditional antimicrobial coating principle.

Results: Uropathogenic Escherichia coli was undetectable in urinary bladders and on retrieved catheters in the IPN treatment group as compared to control that revealed significant bacteriuria (>10⁵ colony forming units/ml) as well as catheter-associated biofilm. The BIP catheters failed to prevent E. coli colonization of the bladder but significantly reduced catheter biofilm formation compared to the control.

Conclusion: The IPN-catheter concept provides a novel, promising delivery route for local treatment in the urinary tract.

Semi-interpenetrating chitosan/ionic liquid polymer networks as electro-responsive biomaterials for potential wound dressings and iontophoretic applications

In this work, electro-responsive chitosan/ionic liquid-based hydrogels were synthetized for the first time, envisaging the development of iontophoretic biomaterials for the controlled release/permeation of charged biomolecules. The main goal was to enhance and tune the physicochemical, mechanical, electro-responsive, and haemostatic properties of chitosan-based biomaterials to obtain multi-stimuli responsive (responsive to electrical current, ionic strength, and pH) and mechanically stable hydrogels. To accomplish this objective, polycationic semi-interpenetrating copolymer networks (semi-IPN) were prepared by combining chitosan (CS) and ionic liquid-based polymers and copolymers, namely poly(1-butyl-3-vinylimidazolium chloride) (poly(BVImCl)) and poly(2-hydroxymethyl methacrylate-co-1-butyl-3-vinylimidazolium chloride) (poly(HEMA-co-BVImCl)). Results show that prepared semi-IPNs presented high mechanical stability and were positively charged over a broad pH range, including basic pH. Semi-IPNs also presented faster permeation and release rates of lidocaine hydrochloride (LH), under external electrical stimulus (0.56 mA/cm²) in aqueous media at 32 °C. The kinetic release constants and the LH diffusion coefficients measured under electrical stimulus were ~1.5 and > 2.7 times higher for those measured for passive release. Finally, both semi-IPNs were non-haemolytic (haemolytic index ≤0.2%) and showed strong haemostatic activity (blood clotting index of ~12 ± 1%). Altogether, these results show that the prepared polycationic semi-IPN hydrogels presented advantageous mechanical, responsive and biological properties that enable them to be potentially employed for the design of new, safer, and advanced stimuli-responsive biomaterials for several biomedical applications such as haemostatic and wound healing dressings and iontophoretic patches.

3D Printing in Development of Nanomedicines

Three-dimensional (3D) printing is gaining numerous advances in manufacturing approaches both at macro- and nanoscales. Three-dimensional printing is being explored for various biomedical applications and fabrication of nanomedicines using additive manufacturing techniques, and shows promising potential in fulfilling the need for patient-centric personalized treatment. Initial reports attributed this to availability of novel natural biomaterials and precisely engineered polymeric materials, which could be fabricated into exclusive 3D printed nanomaterials for various biomedical applications as nanomedicines. Nanomedicine is defined as the application of nanotechnology in designing nanomaterials for different medicinal applications, including diagnosis, treatment, monitoring, prevention, and control of diseases. Nanomedicine is also showing great impact in the design and development of precision medicine. In contrast to the "one-size-fits-all" criterion of the conventional medicine system, personalized or precision medicines consider the differences in various traits, including pharmacokinetics and genetics of different patients, which have shown improved results over conventional treatment. In the last few years, much literature has been published on the application of 3D printing for the fabrication of nanomedicine. This article deals with progress made in the development and design of tailor-made nanomedicine using 3D printing technology.

Multiscale Experimental Evaluation of Agarose-Based Semi-Interpenetrating Polymer Network Hydrogels as Materials with Tunable Rheological and Transport Performance

This study introduces an original concept in the development of hydrogel materials for controlled release of charged organic compounds based on semi-interpenetrating polymer networks composed by an inert gel-forming polymer component and interpenetrating linear polyelectrolyte with specific binding affinity towards the carried active compound. As it is experimentally illustrated on the prototype hydrogels prepared from agarose interpenetrated by poly(styrene sulfonate) (PSS) and alginate (ALG), respectively, the main benefit brought by this concept is represented by the ability to tune the mechanical and transport performance of the material independently via manipulating the relative content of the two structural components. A unique analytical methodology is proposed to provide complex insight into composition-structure-performance relationships in the hydrogel material combining methods of analysis on the macroscopic scale, but also in the specific microcosms of the gel network. Rheological analysis has confirmed that the complex modulus of the gels can be adjusted in a wide range by the gelling component (agarose) with negligible effect of the interpenetrating component (PSS or ALG). On the other hand, the content of PSS as low as 0.01 wt.% of the gel resulted in a more than 10-fold decrease of diffusivity of model-charged organic solute (Rhodamine 6G).

Swelling behavior and mechanical properties of Chitosan-Poly(N-vinyl-pyrrolidone) hydrogels

In this research, three modified chitosan-based hydrogels are synthesized, i.e., a crosslinked chitosan hydrogel and semi- and fully-interpenetrating polymer network (IPN) chitosan hydrogels fabricated using poly(N-vinyl-pyrrolidone). A non-modified chitosan hydrogel was also synthesized as a control. These samples were compared regarding their swelling behavior and mechanical properties. The hydrogels were characterized by Fourier Transform Infrared (FTIR) analysis and microscopy observations. The effect of crosslinking on the swelling capacity and on the swelling kinetics were evaluated in distilled water, simulated gastric fluid (SGF), and simulated intestinal fluid (SIF) at 37 °C, and the data were interpreted using various kinetic models. Finally, the mechanical properties were evaluated based on the tensile strength using a universal tensile testing machine. The results revealed that the swelling process conformed to the Schott model (pseudo-second-order kinetics), with Fickian diffusion as the diffusion mechanism type. The hydrogels all showed similar trends in their swelling kinetics. However, the full-IPN hydrogel exhibited the lowest equilibrium swelling capacity and the highest swelling rate. The mechanical test results indicate that the crosslinking model affects the resulting tensile strength.

Biocompatible Hydrogels Based on Food Gums with Tunable Physicochemical Properties as Scaffolds for Cell Culture

Hydrogels composed of food gums have gained attention for future biomedical applications, such as targeted delivery and tissue engineering. For their translation to clinical utilization, reliable biocompatibility, sufficient mechanical performance, and tunable structure of polysaccharide hydrogels are required aspects. In this work, we report a unique hybrid polysaccharide hydrogel composed of salecan and curdlan, in which the former is a thickening agent and the latter serves as a network matrix. The physicochemical properties, such as mechanical strength, thermal stability, swelling, and morphology, of the developed composite hydrogel can be accurately modulated by varying the polysaccharide content. Importantly, cytotoxicity assays show the non-toxicity of this hybrid hydrogel. Furthermore, this hydrogel system can support cell proliferation, migration, and function. Altogether, our work proposes a new strategy to build a polysaccharide-constructed hydrogel scaffold, which holds much promise for tissue engineering in terms of cell engraftment, survival, proliferation, and function.

Specialty Tough Hydrogels and Their Biomedical Applications

Hydrogels have long been explored as attractive materials for biomedical applications given their outstanding biocompatibility, high water content, and versatile fabrication platforms into materials with different physiochemical properties and geometries. Nonetheless, conventional hydrogels suffer from weak mechanical properties, restricting their use in persistent load-bearing applications often required of materials used in medical settings. Thus, the fabrication of mechanically robust hydrogels that can prolong the lifetime of clinically suitable materials under uncompromising in vivo conditions is of great interest. This review focuses on design considerations and strategies to construct such tough hydrogels. Several promising advances in the proposed use of specialty tough hydrogels for soft actuators, drug delivery vehicles, adhesives, coatings, and in tissue engineering settings are highlighted. While challenges remain before these specialty tough hydrogels will be deemed translationally acceptable for clinical applications, promising preliminary results undoubtedly spur great hope in the potential impact this embryonic research field can have on the biomedical community.

Janus Nanoparticles Enable Entropy-Driven Mixing of Bicomponent Hydrogels

Mixing incompatible polymers in water to form homogeneous hydrogels possessing both hydrophilic and lipophilic components is challenging due to high enthalpic penalty and negligible entropic gain in total Gibbs free energy. Here we performed dissipative particle dynamics simulations and machine learning to uncover the influence of Janus nanoparticles on immiscible polymer mixtures with high water content and to predict the phase behavior of bicomponent hydrogels. An intriguing transition from kinetically arrested demixing to spontaneous mixing was observed with increasing particle concentration and decreasing particle size. The analysis reveals that the mixing is driven by a significant entropic gain of small nanoparticles being well dispersed in aqueous solvent of high-volume fraction. This finding highlights an entropy-driven mixing mechanism for nanocomposite bicomponent hydrogels. Supervised machine learning algorithms were used to establish a microstructure phase diagram with respect to particle concentration and radius, in which homogeneous, percolated, clustered, and separated phases, as well as corresponding phase boundaries, were clearly identified.

Temperature-Induced Mechanomodulation of Interpenetrating Networks of Star Poly(ethylene glycol)-Heparin and Poly(N-isopropylacrylamide)

Thermoresponsive interpenetrating networks (IPNs) were prepared by sequential synthesis of a biohybrid network of star-shaped poly(ethylene glycol) [starPEG] and heparin and a poly(N-isopropylacrylamide)-polymer network. Amide bond formation was used for cross-linking of the starPEG-heparin network and photo-cross-linking with N,N'-methylenebis(acrylamide) was applied for the formation of the second polymer network. Both networks were linked by chain entanglements and hydrogen bonds only. The obtained sequential IPNs (seq-IPNs) showed temperature-dependent network properties as reflected by swelling and elasticity data as well as by the release of glycosaminoglycan-binding growth factors. The elastic modulus of the seq-IPNs was found to be amplified up to 50-fold upon temperature change from 22 to 37 °C compared to the intrinsic elastic moduli of the two combined networks. The heparin concentration (as well as the complexation of growth factors with the hydrogel-contained heparin) was demonstrated to be variably independent from the mechanical properties (elastic moduli) of the hydrogels. Illustrating the usability of the developed seq-IPN platform for cell fate control, the thermo-modulation of the release of vascular endothelial growth factor (VEGF) and bone morphogenetic protein 2 (BMP-2) is shown as well as the osteogenic differentiation of human mesenchymal stem cells exposed to stiff and BMP-2 releasing seq-IPNs.

Bioinactive semi-interpenetrating network gel layers: zwitterionic polymer chains incorporated in a cross-linked polymer brush

A thin gel layer with thermo-responsive polymer brushes and semi-interpenetrating PCMB exhibited the switching of bio-inert properties depending on temperature.

Interpenetrating network gelatin methacryloyl (GelMA) and pectin-g-PCL hydrogels with tunable properties for tissue engineering

The design of new hydrogel-based biomaterials with tunable physical and biological properties is essential for the advancement of applications related to tissue engineering and regenerative medicine. For instance, interpenetrating polymer network (IPN) and semi-IPN hydrogels have been widely explored to engineer functional tissues due to their characteristic microstructural and mechanical properties. Here, we engineered IPN and semi-IPN hydrogels comprised of a tough pectin grafted polycaprolactone (pectin-g-PCL) component to provide mechanical stability, and a highly cytocompatible gelatin methacryloyl (GelMA) component to support cellular growth and proliferation. IPN hydrogels were formed by calcium ion (Ca2+)-crosslinking of pectin-g-PCL chains, followed by photocrosslinking of the GelMA precursor. Conversely, semi-IPN networks were formed by photocrosslinking of the pectin-g-PCL and GelMA mixture, in the absence of Ca2+ crosslinking. IPN and semi-IPN hydrogels synthesized with varying ratios of pectin-g-PCL to GelMA, with and without Ca2+-crosslinking, exhibited a broad range of mechanical properties. For semi-IPN hydrogels, the aggregation of microcrystalline cores led to formation of hydrogels with compressive moduli ranging from 3.1 to 10.4 kPa. For IPN hydrogels, the mechanistic optimization of pectin-g-PCL, GelMA, and Ca2+ concentrations resulted in hydrogels with comparatively higher compressive modulus, in the range of 39 kPa-5029 kPa. Our results also showed that IPN hydrogels were cytocompatible in vitro and could support the growth of three-dimensionally (3D) encapsulated MC3T3-E1 preosteoblasts in vitro. The simplicity, technical feasibility, low cost, tunable mechanical properties, and cytocompatibility of the engineered semi-IPN and IPN hydrogels highlight their potential for different tissue engineering and biomedical applications.

Chitosan-Based In Situ Gels for Ocular Delivery of Therapeutics: A State-of-the-Art Review

Ocular in situ gels are a promising alternative to overcome drawbacks of conventional eye drops because they associate the advantages of solutions such as accuracy and reproducibility of dosing, or ease of administration with prolonged contact time of ointments. Chitosan is a natural polymer suitable for use in ophthalmic formulations due to its biocompatibility, biodegradability, mucoadhesive character, antibacterial and antifungal properties, permeation enhancement and corneal wound healing effects. The combination of chitosan, pH-sensitive polymer, with other stimuli-responsive polymers leads to increased mechanical strength of formulations and an improved therapeutic effect due to prolonged ocular contact time. This review describes in situ gelling systems resulting from the association of chitosan with various stimuli-responsive polymers with emphasis on the mechanism of gel formation and application in ophthalmology. It also comprises the main techniques for evaluation of chitosan in situ gels, along with requirements of safety and ocular tolerability.

Therapeutically Effective Controlled Release Formulation of Pirfenidone from Nontoxic Biocompatible Carboxymethyl Pullulan-Poly(vinyl alcohol) Interpenetrating Polymer Networks

The present study was conducted to develop therapeutically effective controlled release formulation of pirfenidone (PFD) and explore the possibility to reduce the total administered dose and dosing regimen. For this purpose, pH-sensitive biomaterial was prepared by inducing carboxymethyl group on pullulan by Williamson ether synthesis reaction, and further, interpenetrating polymeric network microspheres were prepared by glutaraldehyde-assisted water-in-oil (w/o) emulsion cross-linking method, which showed higher swelling ratio in acidic and basic pH. The formation of microspheres was confirmed by different spectral characterization techniques, and thermal kinetic study indicated the formation of thermally stable microspheres. Cell viability and biocompatibility studies on hepatocellular carcinoma (HepG2) cell showed the polymeric matrix to be biocompatible. In vitro dissolution of optimized formulation (F5) showed releases of 54.09 and 76.37% in 0.1 N HCl after 2 h and phosphate buffer (pH 6.8) up to 8 h, respectively. In vivo performances of prepared microsphere and marketed product of PFD were compared in rabbit. T max (time taken to reach peak plasma concentration) was found to be achieved at 0.83 h, compared to 0.5 h for Pirfenex with no significant difference complementing the immediate action, while area under curve was significantly greater for optimized formulation (9768 ± 1300 ng h/mL) compared to Pirfenex (4311 ± 110 ng h/mL), complementing the sustained action. In vivo pharmacokinetic study suggested that the prepared microsphere could be a potential candidate for therapeutically effective controlled delivery of PFD used in dyspnea and cough management due to idiopathic pulmonary fibrosis.

Interpenetrating Polymer Network Microgels in Water: Effect of Composition on the Structural Properties and Electrosteric Interactions

Microgels of cross-linked interpenetrating polymer networks (IPNs) are very versatile systems combining the properties of colloids and polymers. Herein we study IPN microgels composed of poly(N-isopropylacrylamide) and poly(acrylic acid) to understand how weight composition and reactant concentrations affect their structural, conformational and electrosteric properties in water. The results show that it is possible to drive the formation of microgels with the desired properties by adjusting IPN composition and preparation method during the synthesis. During synthesis, the polymerization of acrylic acid triggers the merging among IPNs via covalent linking, giving rise to microgels with larger mass and size, the effect being larger for higher concentration of the reactants. In addition, a close relation between the microgel internal conformation and the colloidal stability is observed, due to the presence of screened groups inside the microgel.

Nanomedicine: An effective tool in cancer therapy

Various types of nanoparticles (NPs) have been used in delivering anticancer drugs to the site of action. This area has become more attractive in recent years due to optimal size and negligible undesirable side effects caused by the NPs. The focus of this review is to explore various types of NPs and their surface/chemical modifications as well as attachment of targeting ligands for tuning their properties in order to facilitate targeted delivery to the cancer sites in a rate-controlled manner. Heme compatibility, biodistribution, longer circulation time, hydrophilic lipophilic balance for high bioavailability, prevention of drug degradation and leakage are important in transporting drugs to the targeted cancer sites. The review discusses advantages of polymeric, magnetic, gold, and mesoporous silica NPs in delivering chemotherapeutic agents over the conventional dosage formulations along with their shortcomings/risks and possible solutions/alternatives.

Incorporation of Fmoc-Y nanofibers into Ca-alginate hydrogels for improving their mechanical properties and the controlled release of small molecules

A robust interpenetrating network (IPN) hydrogel was assembled from calcium alginate and Fmoc-tyrosine for the controlled release of small molecules.

Comparative Study of In Situ Loaded Antibody and PEG-Fab NIPAAM Gels

Hydrogels can potentially prolong the release of a therapeutic protein, especially to treat blinding conditions. One challenge is to ensure that the protein and hydrogel are intimately mixed by better protein entanglement within the hydrogel. N-isopropylacrylamide (NIPAAM) gels are optimized with poly(ethylene glycol) diacrylate (PEDGA) crosslinker in the presence of either bevacizumab or PEG conjugated ranibizumab (PEG₁₀ -Fab_rani ). The release profiles of the hydrogels are evaluated using an outflow model of the eye, which is previously validated for human clearance of proteins. Release kinetics of in situ loaded bevacizumab-NIPAAM gels displays a prolonged bimodal release profile in phosphate buffered saline compared to bevacizumab loaded into a preformed NIPAAM gel. Bevacizumab release in simulated vitreous from in situ loaded gels is similar to bevacizumab control indicating that diffusion through the vitreous rather than from the gel is rate limiting. Ranibizumab is site-specifically PEGylated by disulfide rebridging conjugation. Prolonged and continuous release is observed with the in situ loaded PEG₁₀ -Fab_rani -NIPAAM gels compared to PEG₁₀ -Fab_rani injection (control). Compared to an unmodified protein, there is better mixing due to PEG entanglement and compatibility of PEG₁₀ -Fab_rani within the NIPAAM-PEDGA hydrogel. These encouraging results suggest that the extended release of PEGylated proteins in the vitreous can be achieved using injectable hydrogels.

Insulin-loaded PLGA microspheres for glucose-responsive release

Porous poly(lactic-co-glycolic acid) (PLGA) microspheres were prepared, loaded with insulin, and then coated in poly(vinyl alcohol) (PVA) and a novel boronic acid-containing copolymer [poly(acrylamide phenyl boronic acid-co-N-vinylcaprolactam); p(AAPBA-co-NVCL)]. Multilayer microspheres were generated using a layer-by-layer approach depositing alternating coats of PVA and p(AAPBA-co-NVCL) on the PLGA surface, with the optimal system found to be that with eight alternating layers of each coating. The resultant material comprised spherical particles with a porous PLGA core and the pores covered in the coating layers. Insulin could successfully be loaded into the particles, with loading capacity and encapsulation efficiencies reaching 2.83 ± 0.15 and 82.6 ± 5.1% respectively, and was found to be present in the amorphous form. The insulin-loaded microspheres could regulate drug release in response to a changing concentration of glucose. In vitro and in vivo toxicology tests demonstrated that they are safe and have high biocompatibility. Using the multilayer microspheres to treat diabetic mice, we found they can effectively control blood sugar levels over at least 18 days, retaining their glucose-sensitive properties during this time. Therefore, the novel multilayer microspheres developed in this work have significant potential as smart drug-delivery systems for the treatment of diabetes.

Spatially-resolved soft materials for controlled release - hybrid hydrogels combining a robust photo-activated polymer gel with an interactive supramolecular gel

Hybrid hydrogels based on self-assembling low-molecular-weight gelator (LMWG) DBS-CONHNH2 (DBS = 1,3;2,4-dibenzylidene-d-sorbitol) and crosslinked polymer gelator (PG) PEGDM (poly(ethyleneglycol) dimethacrylate) are reported, and an active pharmaceutical ingredient (naproxen, NPX) is incorporated. The use of PEGDM as PG enhances the mechanical stiffness of the hybrid gel (G' increases from 400 to 4500 Pa) - the LMWG enhances its stability to very high frequency. Use of DBS-CONHNH2 as LMWG enables interactions with NPX and hence allows pH-mediated NPX release - the PG network is largely orthogonal and only interferes to a limited extent. Use of photo-activated PEGDM as PG enables spatially-resolved photo-patterning of robust hybrid gel domains within a preformed LMWG network - the presence of the LMWG enhances the spatial resolution. The photo-patterned multi-domain gel retains pH-mediated NPX release properties and directionally releases NPX into a compartment of higher pH. The two components within these hybrid PG/LMWG hydrogels therefore act largely independently of one another, although they do modify each others properties in subtle ways. Hybrid hydrogels capable of spatially controlled unidirectional release have potential applications in tissue engineering and drug-delivery.

Salecan-Based pH-Sensitive Hydrogels for Insulin Delivery

Stimuli-responsive polymeric hydrogels are promising and appealing delivery vehicles for protein/peptide drugs and have made protein/peptide delivery with both dosage- and spatiotemporal-controlled manners possible. Here a series of new Salecan-based pH-sensitive hydrogels were fabricated for controlled insulin delivery via the graft copolymerization reaction between Salecan and 2-acrylamido-2-methyl-1-propanesulfonic acid. In this study, on one hand, Salecan played a key role in modifying the structure and the pore size of the developing hydrogel. On the other hand, Salecan tuned the water content and the water release rate of the obtained hydrogel, leading to a controllable release rate of the insulin. More importantly, in vitro release experiments validated that the release of insulin from this intelligent system could be also tailored by the environmental pH of the release medium. For SGA2, the amount of encapsulated insulin released at gastric conditions (pH 1.2) was relatively low (about 26.1 wt % in 24 h), while that released at intestinal conditions (pH 7.4) increased significantly (over 50 wt % in 6 h). Furthermore, toxicity assays demonstrated that the designed hydrogel carriers were biocompatible. These characteristics make the Salecan-based hydrogel a promising candidate for protein/peptide drug delivery device.

Cationic Salecan-based hydrogels for release of 5-fluorouracil

We designed novel Salecan-based hydrogels for controlled release of 5-fluorouracil.

The Influence of Anionic Initiator on the Selected Properties of Poly-N-Isopropyl Acrylamide Evaluated for Controlled Drug Delivery

The aim of the study was to monitor the influence of increasing initiator concentrations on the properties of poly-N-isopropylacrylamide (polyNIPA) nanoparticles obtained via surfactant free precipitation polymerization (SFPP). In all studied systems P-001 to P-1, the same amount of monomer was used, and increasing amounts of potassium persulphate (KPS). The course of each reaction was monitored by measuring the conductivity of the whole system. The resulting composition of products was confirmed by attenuated total reflectance within Fourier transformed infrared spectroscopy (ATR-FTIR) measurements. The hydrodynamic diameters with polydispersity index (PDI) and zeta potential (ZP) were measured in aqueous dispersions of the synthesized polymers in dynamic light scattering (DLS) device (λ = 678 nm), and were found to be for P-1: 20.33 nm (PDI = 0.49) and −7 mV, for P-05: 22.24 nm (PDI = 0.39) and −5 mV, for P-01: 50.14 nm (PDI = 0.49) and −3 mV, for P-005: 62.75 nm (PDI = 0.54) and −3 mV and for P-001: 509.4 nm (PDI = 0.61) and −12 mV at 18 °C, respectively. Initiator concentration affects the size and ZP of particles. The hydrodynamic diameter decreases with initiator concentration increase, whereas the time of the reaction decreases when the initiator concentration increases. This fact is reflected in the observed values of conductivity in the course of the performed reaction. Evaluated volume phase transition temperature in the range of 32 °C enables further research of the nanoparticles as thermosensitive drug carriers.

Semi-Interpenetrating Polymer Networks with Predefined Architecture for Metal Ion Fluorescence Monitoring

The development of new synthetic approaches for the preparation of efficient 3D luminescent chemosensors for transition metal ions receives considerable attention nowadays, owing to the key role of the latter as elements in biological systems and their harmful environmental effects when present in aquatic media. In this work, we describe an easy and versatile synthetic methodology that leads to the generation of nonconjugated 3D luminescent semi-interpenetrating amphiphilic networks (semi-IPN) with structure-defined characteristics. More precisely, the synthesis involves the encapsulation of well-defined poly(9-anthrylmethyl methacrylate) (pAnMMA) (hydrophobic, luminescent) linear polymer chains within a covalent poly(2-(dimethylamino)ethyl methacrylate) (pDMAEMA) hydrophilic polymer network, derived via the 1,2-bis-(2-iodoethoxy)ethane (BIEE)-induced crosslinking process of well-defined pDMAEMA linear chains. Characterization of their fluorescence properties demonstrated that these materials act as strong blue emitters when exposed to UV irradiation. This, combined with the presence of the metal-binding tertiary amino functionalities of the pDMAEMA segments, allowed for their applicability as sorbents and fluorescence chemosensors for transition metal ions (Fe3+, Cu2+) in solution via a chelation-enhanced fluorescence-quenching effect promoted within the semi-IPN network architecture. Ethylenediaminetetraacetic acid (EDTA)-induced metal ion desorption and thus material recyclability has been also demonstrated.

Mechanical properties of PNIPAM based hydrogels: A review

Materials which adjust their properties in response to environmental factors such as temperature, pH and ionic strength are rapidly evolving and known as smart materials. Hydrogels formed by smart polymers have various applications. Among the smart polymers, thermoresponsive polymer poly(N-isopropylacrylamide)(PNIPAM) is very important because of its well defined structure and property specially its temperature response is closed to human body and can be finetuned as well. Mechanical properties are critical for the performance of stimuli responsive hydrogels in diverse applications. However, native PNIPAM hydrogels are very fragile and hardly useful for any practical purpose. Intense researches have been done in recent decade to enhance the mechanical features of PNIPAM hydrogel. In this review, several strategies including interpenetrating polymer network (IPN), double network (DN), nanocomposite (NC) and slide ring (SR) hydrogels are discussed in the context of PNIPAM hydrogel.

Co-release of dicloxacillin and thioridazine from catheter material containing an interpenetrating polymer network for inhibiting device-associated Staphylococcus aureus infection

Approximately half of all nosocomial bloodstream infections are caused by bacterial colonization of vascular catheters. Attempts have been made to improve devices using anti-adhesive or antimicrobial coatings; however, it is often difficult to bind coatings stably to catheter materials, and the low amounts of drug in thin-film coatings limit effective long-term release. Interpenetrating polymer networks (IPNs) are polymer hybrid materials with unique drug release properties. While IPNs have been extensively investigated for use in tablet- or capsule-based drug delivery systems, the potential for use of IPNs in drug release medical devices remains largely unexplored. Here, we investigated the use of silicone-hydrogel IPNs as a catheter material to provide slow anti-bacterial drug-release functionality. IPN catheters were produced by the sequential method, using supercritical CO₂ as a solvent to polymerize and crosslink poly(2-hydroxyethyl methacrylate) (PHEMA) in silicone elastomer. The design was tested against Staphylococcus aureus colonization after loading with dicloxacillin (DCX) alone or in combination with thioridazine (TDZ), the latter of which is known to synergistically potentiate the antibacterial effect of DCX against both methicillin-sensitive and methicillin-resistant S. aureus. The hydrophilic PHEMA component allowed for drug loading in the catheters by passive diffusion and provided controlled release properties. The drug-loaded IPN material inhibited bacterial growth on agar plates for up to two weeks and in blood cultures for up to five days, and it withstood 24h of seeding with resilient biofilm aggregates. The combined loading of DCX+TDZ enhanced the antibacterial efficiency in static in vitro experiments, although release analyses revealed that this effect was due to an enhanced loading capacity of DCX when co-loaded with TDZ. Lastly, the IPN catheters were tested in a novel porcine model of central venous catheter-related infection, in which drug-loaded IPN catheters were found to significantly decrease the frequency of infection.

Mucoadhesive microparticulates based on polysaccharide for target dual drug delivery of 5-aminosalicylic acid and curcumin to inflamed colon

In this work, thiolated chitosan/alginate composite microparticulates (CMPs) coated by Eudragit S-100 were developed for colon-specific delivery of 5-aminosalicylic acid (5-ASA) and curcumin (CUR), and the use of it as a multi drug delivery system for the treatment of colitis. The physicochemical properties of the CMPs were evaluated. In vitro release was performed in gradually pH-changing medium simulating the conditions of different parts of GIT, and the results showed that the Eudragit S-100 coating has a pH-sensitive release property, which can avoid drug being released at a pH lower than 7. An everted sac method was used to evaluate the mucoadhesion of CMPs. Ex vivo mucoadhesive tests showed CMPs have excellent mucosa adhesion for the colonic mucosa of rats. In vivo treatment effect of enteric microparticulates systems was evaluated in colitis rats. The results showed superior therapeutic efficiency of this drug delivery system for the colitis rats induced by TNBS. Therefore, the enteric microparticulates systems combined the properties of pH dependent delivery, mucoadhesive, and control release, and could be an available tool for the treatment of human inflammatory bowel disease.

Transient Biocompatible Polymeric Platforms for Long-Term Controlled Release of Therapeutic Proteins and Vaccines

Polymer-based interpenetrating networks (IPNs) with controllable and programmable degradation and release kinetics enable unique opportunities for physisorption and controlled release of therapeutic proteins or vaccines while their chemical and structural integrities are conserved. This paper presents materials, a simple preparation method, and release kinetics of a series of long-term programmable, biocompatible, and biodegradable polymer-based IPN controlled release platforms. Release kinetics of the gp41 protein was controlled over a 30-day period via tuning and altering the chemical structure of the IPN platforms. Post-release analysis confirmed structural conservation of the gp41 protein throughout the process. Cell viability assay confirmed biocompatibility and non-cytotoxicity of the IPNs.

Structurally-defined semi-interpenetrating amphiphilic polymer networks with tunable and predictable mechanical response

Structurally-defined, 1,2-bis-(2-iodoethoxy)ethane (BIEE)-crosslinked semi-interpenetrating amphiphilic polymer networks were synthesized, exhibiting tunable and predictable mechanical response based on mathematical modeling.

CD147 monoclonal antibody mediated by chitosan nanoparticles loaded with α-hederin enhances antineoplastic activity and cellular uptake in liver cancer cells

An antibody that specifically interacts with an antigen could be applied to an active targeting delivery system. In this study, CD147 antibody was coupled with α-hed chitosan nanoparticles (α-Hed-CS-NPs). α-Hed-CS-CD147-NPs were round and spherical in shape, with an average particle size of 148.23 ± 1.75 nm. The half-maximum inhibiting concentration (IC50) of α-Hed-CS-CD147-NPs in human liver cancer cell lines HepG2 and SMMC-7721 was lower than that of free α-Hed and α-Hed-CS-NPs. α-Hed-induced cell death was mainly triggered by apoptosis. The increase in intracellular accumulation of α-Hed-CS-CD147-NPs was also related to CD147-mediated internalization through the Caveolae-dependent pathway and lysosomal escape. The higher targeting antitumor efficacy of α-Hed-CS-CD147-NPs than that α-Hed-CS-NPs was attributed to its stronger fluorescence intensity in the tumor site in nude mice.