Blue and red LED lighting effects on plant biomass, stomatal conductance, and metabolite content in nine tomato genotypes

Compensation of adverse growing media effects on plant growth and morphology by supplemental LED lighting

There is an increasing interest in alternatives to peat in growing media due to environmental constraints. However, plants grown in peat substitutes often show impaired growth compared to plants grown in peat-based media. Hence, it would be interesting to know whether these deficiencies can be compensated by supplementing other growth factors, e.g. light. The present study aims to investigate the interactive nature between growing media and supplemental lighting on plant growth and morphology, and to examine whether supplemental light emitting diode (LED) lighting may compensate adverse growing media effects. Basil (Ocimum basilicum L.) and Chinese cabbage (Brassica rapa subsp. pekinensis) were grown in different growing media consisting of peat, green compost, coconut pulp, wood fibre, perlite and sphagnum moss under blue, red and far-red supplemental LED lighting. We found significant interactions between growing media and supplemental photosynthetically active radiation (PAR) on plant growth, morphology and development. At low light intensities, peat-based and substituted growing media performed similarly, whereas with increasing light intensities the peat-based growing media significantly outperformed their alternatives. The substrate choice determines the required amount of supplemental light to compensate for adverse growing media effects and the amount varies depending on plant species and season. Thereby, it was indicated that red light alleviates adverse growing media effects best. We also found that far-red light is not effective when background PAR is low and becomes more effective under high background PAR. The implications and prospects of the results are discussed.

Optimizing lettuce yields and quality by incorporating movable downward lighting with a supplemental adjustable sideward lighting system in a plant factory

Background

Lettuce is a vegetable that is increasingly consumed globally, given its nutritional quality. Plant factories with artificial lighting can produce high-yield and high-quality plants. High plant density in these systems speeds up leaf senescence. Wasted energy and lower yield raised labor expenses are some of the bottlenecks associated with this farming system. In order to increase lettuce yields and quality in the plant factory, it is essential to develop cultivating techniques using artificial lighting.

Methods

Romaine lettuce was grown under a developed "movable downward lighting combined with supplemental adjustable sideward lighting system" (C-S) and under a system without supplemental sideward lighting (N-S) in a plant factory. The effects of C-S on lettuce's photosynthetic characteristics, plant yield, and energy consumption relative to plants grown under a system without N-S were studied.

Results

Romaine lettuce growth and light energy consumption in the plant factory were both influenced favorably by supplementary adjustable sideward lighting. The number of leaves, stem diameter, fresh and dry weights, chlorophyll a and b concentration, and biochemical content (soluble sugar and protein) all increased sharply. The energy consumption was substantially higher in the N-S treatment than the C-S.

Effect of Light Quality on Metabolomic, Ionomic, and Transcriptomic Profiles in Tomato Fruit

Light quality affects plant growth and the functional component accumulation of fruits. However, there is little knowledge of the effects of light quality based on multiomics profiles. This study combined transcriptomic, ionomic, and metabolomic analyses to elucidate the effects of light quality on metabolism and gene expression in tomato fruit. Micro-Tom plants were grown under blue or red light-emitting diode light for 16 h daily after anthesis. White fluorescent light was used as a reference. The metabolite and element concentrations and the expression of genes markedly changed in response to blue and red light. Based on the metabolomic analysis, amino acid metabolism and secondary metabolite biosynthesis were active in blue light treatment. According to transcriptomic analysis, differentially expressed genes in blue and red light treatments were enriched in the pathways of secondary metabolite biosynthesis, carbon fixation, and glycine, serine, and threonine metabolism, supporting the results of the metabolomic analysis. Ionomic analysis indicated that the element levels in fruits were more susceptible to changes in light quality than in leaves. The concentration of some ions containing Fe in fruits increased under red light compared to under blue light. The altered expression level of genes encoding metal ion-binding proteins, metal tolerance proteins, and metal transporters in response to blue and red light in the transcriptomic analysis contributes to changes in the ionomic profiles of tomato fruit.

Light-Quality Manipulation to Control Plant Growth and Photomorphogenesis in Greenhouse Horticulture: The State of the Art and the Opportunities of Modern LED Systems

Light quantity (intensity and photoperiod) and quality (spectral composition) affect plant growth and physiology and interact with other environmental parameters and cultivation factors in determining the plant behaviour. More than providing the energy for photosynthesis, light also dictates specific signals which regulate plant development, shaping and metabolism, in the complex phenomenon of photomorphogenesis, driven by light colours. These are perceived even at very low intensity by five classes of specific photoreceptors, which have been characterized in their biochemical features and physiological roles. Knowledge about plant photomorphogenesis increased dramatically during the last years, also thanks the diffusion of light-emitting diodes (LEDs), which offer several advantages compared to the conventional light sources, such as the possibility to tailor the light spectrum and to regulate the light intensity, depending on the specific requirements of the different crops and development stages. This knowledge could be profitably applied in greenhouse horticulture to improve production schedules and crop yield and quality. This article presents a brief overview on the effects of light spectrum of artificial lighting on plant growth and photomorphogenesis in vegetable and ornamental crops, and on the state of the art of the research on LEDs in greenhouse horticulture. Particularly, we analysed these effects by approaching, when possible, each single-light waveband, as most of the review works available in the literature considers the influence of combined spectra.

LED color gradient as a new screening tool for rapid phenotyping of plant responses to light quality

BACKGROUND

The increasing demand for local food production is fueling high interest in the development of controlled environment agriculture. In particular, LED technology brings energy-saving advantages together with the possibility of manipulating plant phenotypes through light quality control. However, optimizing light quality is required for each cultivated plant and specific purpose.

FINDINGS

This article shows that the combination of LED gradient set-ups with imaging-based non-destructive plant phenotyping constitutes an interesting new screening tool with the potential to improve speed, logistics, and information output. To validate this concept, an experiment was performed to evaluate the effects of a complete range of red:blue ratios on 7 plant species: Arabidopsis thaliana, Brachypodium distachyon, Euphorbia peplus, Ocimum basilicum, Oryza sativa, Solanum lycopersicum, and Setaria viridis. Plants were exposed during 30 days to the light gradient and showed significant, but species-dependent, responses in terms of dimension, shape, and color. A time-series analysis of phenotypic descriptors highlighted growth changes but also transient responses of plant shapes to the red:blue ratio.

CONCLUSION

This approach, which generated a large reusable dataset, can be adapted for addressing specific needs in crop production or fundamental questions in photobiology.

Optimization of Photosynthetic Photon Flux Density and Light Quality for Increasing Radiation-Use Efficiency in Dwarf Tomato under LED Light at the Vegetative Growth Stage

Dwarf tomatoes are advantageous when cultivated in a plant factory with artificial light because they can grow well in a small volume. However, few studies have been reported on cultivation in a controlled environment for improving productivity. We performed two experiments to investigate the effects of photosynthetic photon flux density (PPFD; 300, 500, and 700 μmol m⁻² s⁻¹) with white light and light quality (white, R3B1 (red:blue = 3:1), and R9B1) with a PPFD of 300 μmol m⁻² s⁻¹ on plant growth and radiation-use efficiency (RUE) of a dwarf tomato cultivar (‘Micro-Tom’) at the vegetative growth stage. The results clearly demonstrated that higher PPFD leads to higher dry mass and lower specific leaf area, but it does not affect the stem length. Furthermore, high PPFD increased the photosynthetic rate (Pn) of individual leaves but decreased RUE. A higher blue light proportion inhibited dry mass production with the same intercepted light because the leaves under high blue light proportion had low Pn and photosynthetic light-use efficiency. In conclusion, 300 μmol m⁻² s⁻¹ PPFD and R9B1 are the recommended proper PPFD and light quality, respectively, for ‘Micro-Tom’ cultivation at the vegetative growth stage to increase the RUE.

Red Light Enhances the Antioxidant Properties and Growth of Rubus hongnoensis

The purpose of this study was to determine the effect of light quality on R.hongnoensis growth, physiology, and antioxidant properties. Five light conditions were employed, including white (control), red (R), blue (B), combined LED of R, green (G), and B at 7:1:2 (RGB), as well as combined LED of R, G, B, and far-red (Fr) at 7:1:2:1 (RGBFr). R light had the greatest growth-promoting effect based on plant height, leaf length, leaf width, stem diameter, and leaf area. However, leaf width and root length exhibited the greatest growth under RGB. The fresh and dry weight of shoots and roots were highest under R and RGB light. Photosynthesis was highest under RGB and lowest under B. Transpiration was highest in RGBFr. Stomatal conductance and photosynthetic water use efficiency were greatest under RGBFr. Total phenol content and radical scavenging activity were highest under R, while total flavonoid content was highest under RGB. Superoxide dismutase (SOD), catalase (CAT), and ascorbate peroxidase (APX) activities were upregulated under W, whereas guaiacol peroxidase (GPX) activity was highest under RGB. The present results suggest that, among the tested light treatments, R light was most conductive for vegetative growth and antioxidant capacity in R. hongnoensis.

Overview of Multiple Applications of Basil Species and Cultivars and the Effects of Production Environmental Parameters on Yields and Secondary Metabolites in Hydroponic Systems

Basil (Ocimum basilicum L.), including other species and cultivars, is an excellent source of nutritional compounds, the accumulation of which can be stimulated by exogenous factors (environmental and nutritional conditions). Although best practices are relatively established for mature basil plants, microgreens production requires further research to optimize quality and quantity. The study objectives are (i) to provide an overview of the many uses of basil, (ii) collate and present common hydroponic systems available in the market, (iii) review effects of key production environment parameters on basil yields in hydroponic systems, and (iv) summarize the effects of the growth environments on yield quantity and quality of basil microgreens. The paper analyzes in detail key production parameters of basil microgreens in hydroponic systems, such as temperature, humidity, pH, electrical conductivity, dissolved oxygen, carbon dioxide, nutrient solutions, and the influence of light (quantity, quality, and photoperiods). The collated literature review has shown that basil, grown hydroponically, can tolerate high variations of environmental parameters: pH 5.1–8.5, temperature 15–24 °C, relative humidity 60–70%, electrical conductivity up to 1.2 mS cm−1, depending on the developmental stage, dissolved oxygen at 4 mg L−1 (optimally 6.5 mg L−1), and light intensity between 200 and 400 μmol m−2 s−1. The study has synthesized an overview of different production parameters to provide guidance on the optimization of environmental conditions to ensure the quantity and quality production of basil microgreens. Improving the quality of basil microgreens can ideally spur continued gastronomic interest in microgreens in general, which will encourage more entrepreneurs to grow basil and other microgreens. Hence, the study findings are a great resource to learn about the effects of different environments on basil microgreen production. This information can inform research for successful production of different species and cultivars of basil microgreens, and establishing testing protocols to improve the quantity and quality of the harvest.

Supplementary Light Differently Influences Physico-Chemical Parameters and Antioxidant Compounds of Tomato Fruits Hybrids

One of the challenges for agriculture in the coming years will be producing more food avoiding reducing the nutritional values of fruits and vegetables, sources of nutraceutical compounds. It has been demonstrated that light-emitting diodes (LEDs) used as a supplementary light (SL) technology improve tomato yield in Mediterranean greenhouses, but few data have been reported about SL effects on fruit physio-chemical parameters. In this study, three tomato hybrid (F1) cultivars were grown for year-round production in a commercial semi-closed glasshouse in Southern Italy: red cherry type ("Sorentyno"), red plum type ("Solarino"), and yellow plum type ("Maggino"). From 120 to 243 days after transplant (DAT), Red/White/Blue LEDs were used as SL. The fruits harvested 180 DAT were analyzed and those obtained under LEDs had 3% more dry weight, 15% more total soluble solids, and 16% higher titratable acidity than fruits grown only under natural light. Generally, the antioxidant activity and the mineral profile of the fruits were not negatively influenced by SL. Lycopene content was unchanged and vitamin C content of "Sorentyno" even increased by 15% under LEDs. Overall, LEDs used as SL technology could be one of the tools used by agriculture in Mediterranean basin to produce more food maintaining high quality production.

Photosynthetic apparatus performance of tomato seedlings grown under various combinations of LED illumination

It is already known that the process of photosynthesis depends on the quality and intensity of light. However, the influence of the new light sources recently used in horticulture, known as Light Emitting Diodes (LEDs), on this process is not yet fully understood. Chlorophyll a fluorescence measurement has been widely used as a rapid, reliable, and noninvasive tool to study the efficiency of the photosystem II (PSII) and to evaluate plant responses to various environmental factors, including light intensity and quality. In this work, we tested the responses of the tomato photosynthetic apparatus to different light spectral qualities. Our results showed that the best performance of the photosynthetic apparatus was observed under a mixture of red and blue light (R7:B3) or a mixture of red, green and blue light (R3:G2:B5). This was demonstrated by the increase in the effective photochemical quantum yield of PSII (Y[II]), photochemical quenching (qP) and electron transport rate (ETR). On the other hand, the mixture of red and blue light with a high proportion of blue light led to an increase in non-photochemical quenching (NPQ). Our results can be used to improve the production of tomato plants under artificial light conditions. However, since we found that the responses of the photosynthetic apparatus of tomato plants to a particular light regime were cultivar-dependent and there was a weak correlation between the growth and photosynthetic parameters tested in this work, special attention should be paid in future research.

Seasonal Efficiency of Supplemental LED Lighting on Growth and Photomorphogenesis of Sweet Basil

For decisions on supplemental lighting a quantitative knowledge of the plants' responses to light under varying conditions is fundamental. In this study, we developed light dose-response curves of growth and morphological traits for Ocimum basilicum L. and examined the effects of light color (blue, red, and white plus far-red) and natural environment (season) on these curves. Four greenhouse experiments were conducted throughout the year to determine the efficiencies of the light regimes on growth and their effects on plant morphology. A special aspect was the photosynthetic efficiency of far-red light. Linear and monomolecular relationships were found for the relationships between plant traits and supplemental light dose. Traits related to biomass productivity increased linearly with light dose whereas some morphological characters showed a saturation behavior. Red light and white plus far-red light were more efficient in plant dry weight production than blue light, and the plants adapted differently to the light qualities: higher biomass under red light was related to a plant architecture more favorable for light capture, i.e., taller plants and bigger leaves. White plus far-red light, on the other hand, increased leaf mass per area (LMA) and light use efficiency (LUE). Blue light resulted in lowest plant light interception and LUE. Considering photosynthetic effects of near-infrared light (PPFD800, 400-800 nm) instead of photosynthetic photon flux density (PPFD700, 400-700 nm) led to strongly reduced efficiencies. Traits related to photosynthesis such as dry weight, LMA and LUE were particularly affected by PPFD800. There were no interactions between the efficiencies of the different light colors and the seasons. Efficiencies of all light regimes were significantly lower during summer compared to spring and winter. Higher dry weight production during summer compared to winter and spring were a consequence of increased light interception rather than changes in LUE. The observed differences in seasonal efficiencies were directly linked to the amount of natural light present as indicated by changes in the ratio of supplemental to natural light.

Monochromatic red light during plant growth decreases the size and improves the functionality of stomata in chrysanthemum

Light emitting diodes (LEDs) now enable precise light quality control. Prior to commercialisation however, the plant response to the resultant light quality regime ought to be addressed. The response was examined here in chrysanthemum by evaluating growth, chlorophyll fluorescence (before and following water deficit), as well as stomatal anatomy (density, size, pore dimensions and aperture heterogeneity) and closing ability. Plants were grown under blue (B), red (R), a mixture of R (70%) and B (RB), or white (W; 41% B, 39% intermediate spectrum, 20% R) light LEDs. Although R light promoted growth, it also caused leaf deformation (epinasty) and disturbed the photosynthetic electron transport system. The largest stomatal size was noted following growth under B light, whereas the smallest under R light. The largest stomatal density was observed under W light. Monochromatic R light stimulated both the rate and the degree of stomatal closure in response to desiccation compared with the other light regimes. We conclude that stomatal size is mainly controlled by the B spectrum, whereas a broader spectral range is important for determining stomatal density. Monochromatic R light enhanced stomatal ability to regulate water loss upon desiccation.

Increase of Yield, Lycopene, and Lutein Content in Tomatoes Grown Under Continuous PAR Spectrum LED Lighting

Light emitting diodes (LEDs) are an energy efficient alternative to high-pressure sodium (HPS) lighting in tomato cultivation. In the past years, we have learned a lot about the effect of red and blue LEDs on plant growth and yield of tomatoes. From previous studies, we know that plants absorb and utilize most of the visible spectrum for photosynthesis. This part of the spectrum is referred to as the photosynthetically active radiation (PAR). We designed a LED fixture with an emission spectrum that partially matches the range of 400 to 700 nm and thus partially covers the absorption spectrum of photosynthetic pigments in tomato leaves. Tomato plants grown under this fixture were significantly taller and produced a higher fruit yield (14%) than plants grown under HPS lighting. There was no difference in the number of leaves and trusses, leaf area, stem diameter, the electron transport rate, and the normalized difference vegetation index. Lycopene and lutein contents in tomatoes were 18% and 142% higher when they were exposed to the LED fixture. However, the ß-carotene content was not different between the light treatments. Transpiration rate under LED was significantly lower (40%), while the light use efficiency (LUE) was significantly higher (19%) compared to HPS lighting. These data show that an LED fixture with an emission spectrum covering the entire PAR range can improve LUE, yields, and content of secondary metabolites in tomatoes compared to HPS lighting.

Influence of Light Spectra from LEDs and Scion × Rootstock Genotype Combinations on the Quality of Grafted Watermelon Seedlings

Grafting is the main means of propagation for watermelon crops. The aim of the present study was to evaluate whether light quality during graft healing variably affects different scion × rootstock genotype combinations. Two watermelon hybrid scions (Sunny Florida F1 and Celine F1) and two interspecific squash rootstocks (Radik and TZ-148) were used, and four scion × rootstock genotype combinations derived. After grafting, we tested seven light-emitting diodes (LEDs), which provided narrow-band red (R) and blue (B); R-B with 36% (36B), 24% (24B), and 12% (12B) blue; 12B with additional far-red (12B+FR); and white (W), in a healing chamber. In three genotype combinations, shoot length, leaf area, and shoot biomass were mainly enhanced under red-blue LEDs, while stem diameter was greater under R. In contrast, dry weight of roots, Dickson’s quality index, and ratio of shoot dry weight/length were variably affected in each genotype combination. From the results, it is concluded that light treatments differentially affected each genotype combination, but some parameters involving biomass production show genotypic dependency.

Light Emitting Diodes (LEDs) as Agricultural Lighting: Impact and Its Potential on Improving Physiology, Flowering, and Secondary Metabolites of Crops

A reduction in crop productivity in cultivable land and challenging environmental factors have directed advancement in indoor cultivation systems, such that the yield parameters are higher in outdoor cultivation systems. In wake of this situation, light emitting diode (LED) lighting has proved to be promising in the field of agricultural lighting. Properties such as energy efficiency, long lifetime, photon flux efficacy and flexibility in application make LEDs better suited for future agricultural lighting systems over traditional lighting systems. Different LED spectrums have varied effects on the morphogenesis and photosynthetic responses in plants. LEDs have a profound effect on plant growth and development and also control key physiological processes such as phototropism, the immigration of chloroplasts, day/night period control and the opening/closing of stomata. Moreover, the synthesis of bioactive compounds and antioxidants on exposure to LED spectrum also provides information on the possible regulation of antioxidative defense genes to protect the cells from oxidative damage. Similarly, LEDs are also seen to escalate the nutrient metabolism in plants and flower initiation, thus improving the quality of the crops as well. However, the complete management of the irradiance and wavelength is the key to maximize the economic efficacy of crop production, quality, and the nutrition potential of plants grown in controlled environments. This review aims to summarize the various advancements made in the area of LED technology in agriculture, focusing on key processes such as morphological changes, photosynthetic activity, nutrient metabolism, antioxidant capacity and flowering in plants. Emphasis is also made on the variation in activities of different LED spectra between different plant species. In addition, research gaps and future perspectives are also discussed of this emerging multidisciplinary field of research and its development.

Dissecting the Genotypic Variation of Growth Responses to Far-Red Radiation in Tomato

The recent development of light-emitting diodes (LEDs) and their application in modern horticulture stimulated studies demonstrating that additional far-red (FR) radiation (700-800 nm) increases plant dry mass. This effect of FR has been explained by improved photosynthesis and/or plant architecture. However, the genotypic variation in this response is largely unknown. Here, we aim to explore and explain the genotypic variation in growth responses to additional FR. We expected the genotypic variation in the responses of plant dry mass to additional FR. Further, we hypothesized that a significant improvement of both net assimilation rate (NAR) and leaf area ratio (LAR) is responsible for a strong dry mass increase under additional FR, while some genotypes respond only marginally or even negatively in NAR or LAR under FR, thus resulting in a weak FR effect on plant dry mass. To test these hypotheses, we grew 33 different tomato genotypes for 21 days with 0, 25, or 100 μmol m^-2 s^-1 of FR added to a common white + red LED background lighting of 150 μmol m^-2 s^-1. Genotypes responded similarly with respect to plant height, stem dry mass, and shoot:root ratio; i.e., they all increased with increasing FR. However, the response of total plant dry mass varied among genotypes. We categorized the genotypes into three groups (strongly, moderately, and weakly responding groups) based on their relative response in total plant dry mass to FR. Growth component analysis revealed that the strongly responding genotypes increased strongly in NAR rather than LAR. The weakly responding genotypes, however, showed a substantial increase in LAR but not NAR. The increase in LAR was due to the increase in specific leaf area. Leaf mass fraction, which is the other component of LAR, decreased with FR and did not differ between groups. In conclusion, tomato genotypes that increased strongly in NAR in response to FR were able to achieve a more substantial increase in dry mass than did other genotypes. This is the first study to explain the differences in growth responses of a large number of tomato genotypes toward FR in their light environment.

Supplemental LED Lighting Effectively Enhances the Yield and Quality of Greenhouse Truss Tomato Production: Results of a Meta-Analysis

Intensive growing systems used for greenhouse tomato production, together with light interception by cladding materials or other devices, may induce intracanopy mutual shading and create suboptimal environmental conditions for plant growth. There are a large number of published peer-reviewed studies assessing the effects of supplemental light-emitting diode (LED) lighting on improving light distribution in plant canopies, increasing crop yields and producing qualitative traits. However, the research results are often contradictory, as the lighting parameters (e.g., photoperiod, intensity, and quality) and environmental conditions vary among conducted experiments. This research presents a global overview of supplemental LED lighting applications for greenhouse tomato production deepened by a meta-analysis aimed at answering the following research question: does supplemental LED lighting enhance the yield and qualitative traits of greenhouse truss tomato production? The meta-analysis was based on the differences among independent groups by comparing a control value (featuring either background solar light or solar + HPS light) with a treatment value (solar + supplemental LED light or solar + HPS + supplemental LED light, respectively) and included 31 published papers and 100 total observations. The meta-analysis results revealed the statistically significant positive effects (p-value < 0.001) of supplemental LED lighting on enhancing the yield (+40%), soluble solid (+6%) and ascorbic acid (+11%) contents, leaf chlorophyll content (+31%), photosynthetic capacity (+50%), and leaf area (+9%) compared to the control conditions. In contrast, supplemental LED lighting did not show a statistically significant effect on the leaf stomatal conductance (p-value = 0.171). In conclusion, in addition to some partial inconsistencies among the considered studies, the present research enables us to assert that supplemental LED lighting ameliorates the quantitative and qualitative aspects of greenhouse tomato production.

Response of Basil Growth and Morphology to Light Intensity and Spectrum in a Vertical Farm

Vertical farming is becoming increasingly popular for production of leafy vegetables and herbs, with basil (Ocimum basilicum L.) as one of the most popular herbs. In basil most research has focused on increasing secondary metabolites with light spectra. However, knowledge about the effect of light intensity (photosynthetic photon flux density, PPFD) and spectra on growth and morphology is key for optimizing quality at harvest. The impact of PPFD and spectrum on plant growth and development is species dependent and currently few studies in basil are available. Understanding the response to End-Of-Production (EOP) light of growth and morphology is important for successful vertical farming. We performed a comprehensive series of experiments, where the effects of EOP PPFD, fraction of blue and their interaction on the growth and morphology were analyzed in two green and one purple basil cultivar. In addition, the impact of different EOP intensities and duration of far-red were investigated. We found that increasing the PPFD increased fresh mass, dry matter content and plant height in all three cultivars. The responses were linear or quadratic depending on the cultivar. A high fraction of blue (>90%) increased plant height and decreased the dry mass partitioning to the leaves. The only interaction found between the fraction of blue and overall PPFD was on plant height in the green cultivar whereas other growth parameters and morphology responded stronger to PPFD than to the fraction of blue light. Plant dry matter production was increased with the addition of far-red. Far-red EOP intensity treatments enhanced the fraction of dry mass partitioned to the leaves, whereas a prolonged far-red treatment enhanced partitioning to the stem. Both plant fresh mass and dry matter content were improved by applying high PPFD shortly before harvest. Light spectra were found to be of less importance than PPFD with respect to plant dry matter content. Light use efficiency (LUE) based on fresh mass decreased with increasing PPFD whereas LUE based on dry mass increased with increasing PPFD, when given as EOP treatments. The overall physiological mechanisms of the light intensity and spectral effects are discussed.

The Combination of Selenium and LED Light Quality Affects Growth and Nutritional Properties of Broccoli Sprouts

Selenium (Se) supplement was combined with different LED light qualities to investigate mutual effects on the growth, nutritional quality, contents of glucosinolates and mineral elements in broccoli sprouts. There were five treatments: CK:1R1B1G, 1R1B1G+Se (100 μmol L⁻¹ Na₂SeO₃), 1R1B+Se, 1R2B+Se, 2R1B+Se, 60 μmol m⁻² s⁻¹ PPFD, 12 h/12 h (light/dark). Sprouts under a combination of selenium and LED light quality treatment exhibited no remarkable change fresh weight, but had a shorter hypocotyl length, lower moisture content and heavier dry weight, especially with 1R2B+Se treatment. The contents of carotenoid, soluble protein, soluble sugar, vitamin C, total flavonoids, total polyphenol and contents of total glucosinolates and organic Se were dramatically improved through the combination of Se and LED light quality. Moreover, heat map and principal component analysis showed that broccoli sprouts under 1R2B+Se treatment had higher nutritional quality and health-promoting compound contents than other treatments. This suggests that the Se supplement under suitable LED lights might be beneficial to selenium-biofortified broccoli sprout production.

Postharvest Spectral Light Composition Affects Chilling Injury in Anthurium Cut Flowers

The effect of the lighting environment during postharvest storage of ornamentals has largely been neglected in previous research. Anthurium is a cold-sensitive species originating from tropical climates and is widely cultivated all around the world for its colorful spathes. To investigate the effects of light spectrum on the performance of Anthurium cut flowers under cold storage, two cultivars [Calore (red spathe) and Angel (withe spathe)] were placed at low temperature (4°C), either in darkness (D) or under different light spectra [red (R), blue (B), 70:30% red:blue (RB), and white (W)] at an intensity of 125 µmol.m-2.s-1. In both cultivars, the longest and shortest vase lives were observed in spathes exposed to the R and B spectra, respectively. In both cultivars, electrolyte leakage (EL) of spathe was highest under the B and W spectra and lowest under the R spectrum. The highest rate of flower water loss from the spathes was observed under the B-containing light spectra, whereas the lowest rate of water loss was observed in D and under the R spectrum. Negative correlations were observed between EL and vase life and between anthocyanin concentration and EL for both Anthurium cultivars. A positive correlation was found between anthocyanin concentration and vase life. For both Anthurium cultivars, spectral light composition with higher percentage of B resulted in higher EL and as a result shorter vase life in cut flowers under cold storage condition. The negative effect of the B light spectrum on vase life of Anthurium can be explained through its effect on water loss and on oxidative stress and membrane integrity. The quality of Anthurium cut flowers should benefit from environments with restricted B light spectrum during postharvest handling.

Dynamic prediction of optical and chromatic performances for a light-emitting diode array based on a thermal-electrical-spectral model

Light-emitting diode (LED) arrays have attracted increased attention in the area of high power intelligent automotive headlamps because of their superiority in disposing of the power limit of an individual LED package and controllably luminous intensity and illumination pattern. The optical and chromatic performances of an LED array do not equal to the sum of individual LED packages' performances, as the thermal interactions between individual LED packages can't be ignored in the actual application. This paper presents a thermal-electrical-spectral (TES) model to dynamically predict the optical and chromatic performances of the LED array. The thermal-electrical (TE) model considering the thermal coupling effect in the LED array is firstly proposed to predict the case temperature of each individual LED package, and the Spectral power distributions (SPDs) of individual LED package is then decomposed by the extended Asym2sig model to extract the spectral characteristic parameters. Finally, the experimental measurements of the designed LED arrays operated under usage conditions are used to verify the TES model. Some validation case studies show that the prediction accuracy of the proposed TES model, which is expressed as a quadratic polynomial function of current and case temperature, can be achieved higher than 95%. Therefore, it can be concluded that this TES model offers a convenient method with high accuracy to dynamically predict the optical and chromatic performances of LED arrays at real usages.

Robust Genetic Transformation System to Obtain Non-chimeric Transgenic Chickpea

Chickpea transformation is an important component for the genetic improvement of this crop, achieved through modern biotechnological approaches. However, recalcitrant tissue cultures and occasional chimerism, encountered during transformation, hinder the efficient generation of transgenic chickpeas. Two key parameters, namely micro-injury and light emitting diode (LED)-based lighting were used to increase transformation efficiency. Early PCR confirmation of positive in vitro transgenic shoots, together with efficient grafting and an extended acclimatization procedure contributed to the rapid generation of transgenic plants. High intensity LED light facilitate chickpea plants to complete their life cycle within 9 weeks thus enabling up to two generations of stable transgenic chickpea lines within 8 months. The method was validated with several genes from different sources, either as single or multi-gene cassettes. Stable transgenic chickpea lines containing GUS (uidA), stress tolerance (AtBAG4 and TlBAG), as well as Fe-biofortification (OsNAS2 and CaNAS2) genes have successfully been produced.

Adding Blue to Red Supplemental Light Increases Biomass and Yield of Greenhouse-Grown Tomatoes, but Only to an Optimum

Greenhouse crop production in northern countries often relies heavily on supplemental lighting for year-round yield and product quality. Among the different spectra used in supplemental lighting, red is often considered the most efficient, but plants do not develop normally when grown solely under monochromatic red light ("red light syndrome"). Addition of blue light has been shown to aid normal development, and typical lighting spectra in greenhouse production include a mixture of red and blue light. However, it is unclear whether sunlight, as part of the light available to plants in the greenhouse, may be sufficient as a source of blue light. In a greenhouse high-wire tomato (Solanum lycopersicum), we varied the percentage of blue supplemental light (in a red background) as 0, 6, 12, and 24%, while keeping total photosynthetically active radiation constant. Light was supplied as a mixture of overhead (99 μmol m-2 s-1) and intracanopy (48 μmol m-2 s-1) LEDs, together with sunlight. Averaged over the whole experiment (111 days), sunlight comprised 58% of total light incident onto the crop. Total biomass, yield and number of fruits increased with the addition of blue light to an optimum, suggesting that both low (0%) and high (24%) blue light intensities were suboptimal for growth. Stem and internode lengths, as well as leaf area, decreased with increases in blue light percentage. While photosynthetic capacity increased linearly with increases in blue light percentage, photosynthesis in the low blue light treatment (0%) was not low enough to suggest the occurrence of the red light syndrome. Decreased biomass at low (0%) blue light was likely caused by decreased photosynthetic light use efficiency. Conversely, decreased biomass at high (24%) blue light was likely caused by reductions in canopy light interception. We conclude that while it is not strictly necessary to add blue light to greenhouse supplemental red light to obtain a functional crop, adding some (6-12%) blue light is advantageous for growth and yield while adding 24% blue light is suboptimal for growth.

Robust Genetic Transformation System to Obtain Non-chimeric Transgenic Chickpea

Chickpea transformation is an important component for the genetic improvement of this crop, achieved through modern biotechnological approaches. However, recalcitrant tissue cultures and occasional chimerism, encountered during transformation, hinder the efficient generation of transgenic chickpeas. Two key parameters, namely micro-injury and light emitting diode (LED)-based lighting were used to increase transformation efficiency. Early PCR confirmation of positive in vitro transgenic shoots, together with efficient grafting and an extended acclimatization procedure contributed to the rapid generation of transgenic plants. High intensity LED light facilitate chickpea plants to complete their life cycle within 9 weeks thus enabling up to two generations of stable transgenic chickpea lines within 8 months. The method was validated with several genes from different sources, either as single or multi-gene cassettes. Stable transgenic chickpea lines containing GUS (uidA), stress tolerance (AtBAG4 and TlBAG), as well as Fe-biofortification (OsNAS2 and CaNAS2) genes have successfully been produced.

Chrysanthemum morphology, photosynthetic efficiency and antioxidant capacity are differentially modified by light quality

The effect of light quality on leaf morphology, photosynthetic efficiency and antioxidant capacity of leaves that fully developed under a specific spectrum was investigated in Chrysanthemum cv. Four light treatments were applied at 100μmolm^-2s^-1 and a photoperiod of 14h using light-emitting diodes, which were 100% red (R), 100% blue (B), 75% red with 25% blue (RB) and white (W), respectively. Intraspecific variation was investigated by studying the response of eight cultivars. Overall, red light significantly decreased the leaf area while the thinnest leaves were observed for W. Chlorophyll content and Chl a/b ratio was highest for W and lowest under R. B and RB resulted in the highest maximum quantum yield (F_v/F_m) and quantum efficiency (Φ_PSII). A negative correlation between heat dissipation (NPQ) and Φ_PSII was found. Blue light induced the highest hydrogen peroxide content, which is a proxy for total ROS generation, followed by W and RB while low contents were found under R. The antioxidative response was not always correlated with hydrogen content and differed depending on the light quality treatment. Blue light enhanced the proline levels, while carotenoids, total flavonoid and phenolic compounds were higher under W. Intraspecific variation in the responses were observed for most parameters with exception of leaf thickness; this intraspecific variation was most pronounced for total phenolic and flavonoid compounds.