Advanced Electroanalysis for Electrosynthesis

Electrosynthesis is a popular, environmentally friendly substitute for conventional organic methods. It involves using charge transfer to stimulate chemical reactions through the application of a potential or current between two electrodes. In addition to electrode materials and the type of reactor employed, the strategies for controlling potential and current have an impact on the yields, product distribution, and reaction mechanism. In this Review, recent advances related to electroanalysis applied in electrosynthesis were discussed. The first part of this study acts as a guide that emphasizes the foundations of electrosynthesis. These essentials include instrumentation, electrode selection, cell design, and electrosynthesis methodologies. Then, advances in electroanalytical techniques applied in organic, enzymatic, and microbial electrosynthesis are illustrated with specific cases studied in recent literature. To conclude, a discussion of future possibilities that intend to advance the academic and industrial areas is presented.

Surfactant-Free Formate/O2 Biofuel Cell with Electropolymerized Phenothiazine Derivative-Modified Enzymatic Bioanode

A formate (HCOO-) bioanode was developed by utilizing a phenothiazine-based electropolymerized layer deposited on sucrose-derived carbon. The electrode modified with NAD-dependent formate dehydrogenase and the electropolymerized layer synergistically catalyzed the oxidation of the coenzyme (NADH) and fuel (HCOO-) to achieve efficient electron transfer. Further, the replacement of carbon nanotubes with water-dispersible sucrose-derived carbon used as the electrode base allowed the fabrication of a surfactant-free bioanode delivering a maximum current density of 1.96 mA cm-2 in the fuel solution. Finally, a separator- and surfactant-free HCOO-/O2 biofuel cell featuring the above bioanode and a gas-diffusion biocathode modified with bilirubin oxidase and 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonate) was fabricated, delivering a maximum power density of 70 μW cm-2 (at 0.24 V) and an open-circuit voltage of 0.59 V. Thus, this study demonstrates the potential of formic acid as a fuel and possibilities for the application of carbon materials in bioanodes.

Model-Driven Design of Redox Mediators: Quantifying the Impact of Quinone Structure on Bioelectrocatalytic Activity with Glucose Oxidase

Successful application of emerging bioelectrocatalysis technologies depends upon an efficient electrochemical interaction between redox enzymes as biocatalysts and conductive electrode surfaces. One approach to establishing such enzyme-electrode interfaces utilizes small redox-active molecules to act as electron mediators between an enzyme-active site and the electrode surface. While redox mediators have been successfully used in bioelectrocatalysis applications ranging from enzymatic electrosynthesis to enzymatic biofuel cells, they are often selected using a guess-and-check approach. Herein, we identify structure-function relationships in redox mediators that describe the bimolecular rate constant for its reaction with a model enzyme, glucose oxidase (GOx). Based on a library of quinone-based redox mediators, a quantitative structure-activity relationship (QSAR) model is developed to describe the importance of mediator redox potential and projected molecular area as two key parameters for predicting the activity of quinone/GOx-based electroenzymatic systems. Additionally, rapid scan stopped-flow spectrophotometry was used to provide fundamental insights into the kinetics and the stoichiometry of reactions between different quinones and the flavin adenine dinucleotide (FAD+/FADH2) cofactor of GOx. This work provides a critical foundation for both designing new enzyme-electrode interfaces and understanding the role that quinone structure plays in altering electron flux in electroenzymatic reactions.

Nanostructured electrodes based on multiwalled carbon nanotube/glyconanoparticles for the specific immobilization of bilirubin oxidase: Application to the electrocatalytic O2 reduction

Here we describe the design and the characterization of novel electrode materials consisting of multi-walled carbon nanotubes coated with glyconanoparticles (GNPs) functionalized with anthraquinone sulfonate. The resulting modified electrodes were characterized by scanning electron microscopy and cyclic voltammetry. Their electrochemical behavior reveals a stable pH-dependent redox signal characteristic of anthraquinone sulfonate. Immobilization of bilirubin oxidase on these three-dimensional electrodes leads to the electroenzymatic reduction of O₂ to water with an onset potential of 0.5 V/SCE (saturated calomel electrode). A catalytic cathodic current of 174 µA (0.88 mA cm^-2) at 0.1 V/SCE, demonstrates that glyconanoparticles modified by anthraquinone sulfonate were able to interact and orientate bilirubin oxidase by electrostatic interactions.

Rational Surface Modification of Carbon Nanomaterials for Improved Direct Electron Transfer-Type Bioelectrocatalysis of Redox Enzymes

Interfacial electron transfer between redox enzymes and electrodes is a key step for enzymatic bioelectrocatalysis in various bioelectrochemical devices. Although the use of carbon nanomaterials enables an increasing number of redox enzymes to carry out bioelectrocatalysis involving direct electron transfer (DET), the role of carbon nanomaterials in interfacial electron transfer remains unclear. Based on the recent progress reported in the literature, in this mini review, the significance of carbon nanomaterials on DET-type bioelectrocatalysis is discussed. Strategies for the oriented immobilization of redox enzymes in rationally modified carbon nanomaterials are also summarized and discussed. Furthermore, techniques to probe redox enzymes in carbon nanomaterials are introduced.

Applications of chitosan (CHI)-reduced graphene oxide (rGO)-polyaniline (PAni) conducting composite electrode for energy generation in glucose biofuel cell

A glassy carbon electrode (GC) immobilized with chitosan (CHI)@reduced graphene (rGO)-polyaniline (PAni)/ferritin (Frt)/glucose oxidase (GOx) bioelectrode was prepared. The prepared electrode was characterized by using cyclic voltammetry (CV), linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) techniques. The morphological characterization was made by scanning electron microsopy (SEM) and Fourier transform infrared (FTIR) spectroscopy. This bioelectrode provided a stable current response of 3.5 ± 0.02 mAcm-2 in 20 mM glucose. The coverage of enzyme on 0.07 cm2 area of electrode modified with CHI@rGO-PAni/Frt was calculated to be 3.80 × 10-8 mol cm-2.

Nitrogenase Bioelectrochemistry for Synthesis Applications

The fixation of atmospheric dinitrogen to ammonia by industrial technologies (such as the Haber Bosch process) has revolutionized humankind. In contrast to industrial technologies, a single enzyme is known for its ability to reduce or "fix" dinitrogen: nitrogenase. Nitrogenase is a complex oxidoreductase enzymatic system that includes a catalytic protein (where dinitrogen is reduced) and an electron-transferring reductase protein (termed the Fe protein) that delivers the electrons necessary for dinitrogen fixation. The catalytic protein most commonly contains a FeMo cofactor (called the MoFe protein), but it can also contain a VFe or FeFe cofactor. Besides their ability to fix dinitrogen to ammonia, these nitrogenases can also reduce substrates such as carbon dioxide to formate. Interestingly, the VFE nitrogenase can also form carbon-carbon bonds. The vast majority of research surrounding nitrogenase employs the Fe protein to transfer electrons, which is also associated with the rate-limiting step of nitrogenase catalysis and also requires the hydrolysis of adenosine triphosphate. Thus, there is significant interest in artificially transferring electrons to the catalytic nitrogenase proteins. In this Account, we review nitrogenase electrocatalysis whereby electrons are delivered to nitrogenase from electrodes. We first describe the use of an electron mediator (cobaltocene) to transfer electrons from electrodes to the MoFe protein. The reduction of protons to molecular hydrogen was realized, in addition to azide and nitrite reduction to ammonia. Bypassing the rate-limiting step within the Fe protein, we also describe how this approach was used to interrogate the rate-limiting step of the MoFe protein: metal-hydride protonolysis at the FeMo-co. This Account next reviews the use of cobaltocene to mediate electron transfer to the VFe protein, where the reduction of carbon dioxide and the formation of carbon-carbon bonds (yielding the formation of ethene and propene) was realized. This approach also found success in mediating electron transfer to the FeFe catalytic protein, which exhibited improved carbon dioxide reduction in comparison to the MoFe protein. In the final example of mediated electron transfer to the catalytic protein, this Account also reviews recent work where the coupling of infrared spectroscopy with electrochemistry enabled the potential-dependent binding of carbon monoxide to the FeMo-co to be studied. As an alternative to mediated electron transfer, recent work that has sought to transfer electrons to the catalytic proteins in the absence of electron mediators (by direct electron transfer) is also reviewed. This approach has subsequently enabled a thermodynamic landscape to be proposed for the cofactors of the catalytic proteins. Finally, this Account also describes nitrogenase electrocatalysis whereby electrons are first transferred from an electrode to the Fe protein, before being transferred to the MoFe protein alongside the hydrolysis of adenosine triphosphate. In this way, increased quantities of ammonia can be electrocatalytically produced from dinitrogen fixation. We discuss how this has led to the further upgrade of electrocatalytically produced ammonia, in combination with additional enzymes (diaphorase, alanine dehydrogenase, and transaminase), to selective production of chiral amine intermediates for pharmaceuticals. This Account concludes by discussing current and future research challenges in the field of electrocatalytic nitrogen fixation by nitrogenase.

Tackling the Challenges of Enzymatic (Bio)Fuel Cells

The ever-increasing demands for clean and sustainable energy sources combined with rapid advances in biointegrated portable or implantable electronic devices have stimulated intensive research activities in enzymatic (bio)fuel cells (EFCs). The use of renewable biocatalysts, the utilization of abundant green, safe, and high energy density fuels, together with the capability of working at modest and biocompatible conditions make EFCs promising as next generation alternative power sources. However, the main challenges (low energy density, relatively low power density, poor operational stability, and limited voltage output) hinder future applications of EFCs. This review aims at exploring the underlying mechanism of EFCs and providing possible practical strategies, methodologies and insights to tackle these issues. First, this review summarizes approaches in achieving high energy densities in EFCs, particularly, employing enzyme cascades for the deep/complete oxidation of fuels. Second, strategies for increasing power densities in EFCs, including increasing enzyme activities, facilitating electron transfers, employing nanomaterials, and designing more efficient enzyme-electrode interfaces, are described. The potential of EFCs/(super)capacitor combination is discussed. Third, the review evaluates a range of strategies for improving the stability of EFCs, including the use of different enzyme immobilization approaches, tuning enzyme properties, designing protective matrixes, and using microbial surface displaying enzymes. Fourth, approaches for the improvement of the cell voltage of EFCs are highlighted. Finally, future developments and a prospective on EFCs are envisioned.

Electrochemical Study on the Extracellular Electron Transfer Pathway from Shewanella Strain Hac319 to Electrodes

Shewanella can transfer electrons to various extracellular electron acceptors. We electrochemically investigated the pathway of extracellular electron transfer from Shewanella strain Hac319 to electrodes. A resting cell suspension of Shewanella strain Hac319 containing lactate produced a steady-state sigmoidal wave in the presence of flavin mononucleotide (FMN) in cyclic voltammetry, but not in the absence of FMN. A harvested cell suspension without cell-washing also produced a similar catalytic wave without any external addition of free FMN. The midpoint potentials of the two sigmoidal waves were identical to the redox potential of free FMN. The data indicate that FMN secreted from the Shewanella strain Hac319 works as an electron-transfer mediator from the cell to electrodes. An addition of cyanide to a resting cell suspension of Shewanella strain Hac319 increased the rate of the FMN reduction in the presence of lactate, while it decreased the respiration rate. By considering the fact that cyanide is coordinated to the heme moiety of hemoproteins and shifts the redox potential to the negative potential side, the data indicate that the electron derived from lactate is predominantly transferred in a down-hill mode from an electron donor with a redox potential more negative than that of FMN without going through outer membrane cytochromes c molecules.

Reactivation of standard [NiFe]-hydrogenase and bioelectrochemical catalysis of proton reduction and hydrogen oxidation in a mediated-electron-transfer system

Standard [NiFe]-hydrogenase from Desulfovibrio vulgaris Miyazaki F (DvMF-H₂ase) catalyzes the uptake and production of hydrogen (H₂) and is a promising biocatalyst for future energy devices. However, DvMF-H₂ase experiences oxidative inactivation under oxidative stress to generate Ni-A and Ni-B states. It takes a long time to reactivate the Ni-A state by chemical reduction, whereas the Ni-B state is quickly reactivated under reducing conditions. Oxidative inhibition limits the application of DvMF-H₂ase in practical devices. In this research, we constructed a mediated-electron-transfer system by co-immobilizing DvMF-H₂ase and a viologen redox polymer (VP) on electrodes. The system can avoid oxidative inactivation into the Ni-B state at high electrode potentials and rapidly reactivate the Ni-A state by electrochemical reduction of VP. H₂ oxidation and H⁺ reduction were realized by adjusting the pH from a thermodynamic viewpoint. Using carbon felt as a working-electrode material, high current densities-up to (200 ± 70) and -(100 ± 9) mA cm^-3 for the H₂-oxidation and H⁺-reduction reactions, respectively-were attained.

Inhibition-based first-generation electrochemical biosensors: theoretical aspects and application to 2,4-dichlorophenoxy acetic acid detection

In this work, several theoretical aspects involved in the first-generation inhibition-based electrochemical biosensor measurements have been discussed. In particular, we have developed a theoretical-methodological approach for the characterization of the kinetic interaction between alkaline phosphatase (AlP) and 2,4-dichlorophenoxy acetic acid (2,4-D) as representative inhibitor studied by means of cyclic voltammetry and amperometry. Based on these findings, a biosensor for the fast, simple, and inexpensive determination of 2,4-D has been developed. The enzyme has been immobilized on screen-printed electrodes (SPEs). To optimize the biosensor performances, several carbon-based SPEs, namely graphite (G), graphene (GP), and multiwalled carbon nanotubes (MWCNTs), have been evaluated. AlP was immobilized on the electrode surface by means of polyvinyl alcohol with styryl-pyridinium groups (PVA-SbQ) as cross-linking agent. In the presence of ascorbate 2-phosphate (A2P) as substrate, the herbicide has been determined, thanks to its inhibition activity towards the enzyme catalyzing the oxidation of A2P to ascorbic acid (AA). Under optimum experimental conditions, the best performance in terms of catalytic efficiency has been demonstrated by MWCNTs SPE-based biosensor. The inhibition biosensor shows a linearity range towards 2,4-D within 2.1-110 ppb, a LOD of 1 ppb, and acceptable repeatability and stability. This analysis method was applied to fortified lake water samples with recoveries above 90%. The low cost of this device and its good analytical performances suggest its application for the screening and monitoring of 2,4-D in real matrices.

Characteristics of fast mediated bioelectrocatalytic reaction near microelectrodes

The pseudo-steady-state current due to a mediated enzymatic reaction on a microelectrode is characterized on the basis of theoretical analysis and numerical simulation. The steady-state current is proportional to substrate concentration when the enzymatic reaction is considerably faster than substrate mass transport via nonlinear diffusion. Under such conditions, the reaction plane, where the mass flow of the substrate is converted to that of the mediator, exists near the electrode surface. The steady-state current increases as the diffusion coefficient of the substrate increases. In contrast, the diffusion coefficient and the concentration of the mediator have minor effects on the current. This difference can be explained on the basis of a change in the reaction plane location. When a sufficient amount of enzyme exists in a system, the system can be used as an amperometric biosensor, the response of which is independent of any change in enzyme activity.

Small electron-transfer proteins as mediators in enzymatic electrochemical biosensors

Electrochemical mediators transfer redox equivalents between the active sites of enzymes and electrodes and, in this way, initiate bioelectrocatalytic redox processes. This has been very useful in the development of the so-called second-generation biosensors, in which they transduce a catalyzed reaction into an electrical signal. Among other pre-requisites, redox mediators must be readily oxidized and/or reduced at the electrode surface and readily interact with the biorecognition component. Small chemical compounds (e.g. ferrocene derivatives, ruthenium, or osmium complexes and viologens) are frequently used for this purpose but, lately, small redox proteins (e.g. horse heart cytochrome c) have also been used as redox partners in biosensing applications. In general, docking between two complementary proteins introduces a second level of selectivity to the biosensor and enlarges the list of compounds analyzed. Moreover, electrochemical interferences are frequently minimized owing to the small overpotentials achieved. This paper provides an overview of enzyme biosensors that are mediated by electron-transfer proteins. The paper begins with a brief discussion of mediated electrochemistry in biosensing systems and proceeds with a detailed description of relevant work on the cooperative use of redox enzymes and biological electron donors and/or acceptors.

Electrochemical oxidation of glucose using mutant glucose oxidase from directed protein evolution for biosensor and biofuel cell applications

In this study, electrochemical characterisation of glucose oxidation has been carried out in solution and using enzyme polymer electrodes prepared by mutant glucose oxidase (B11-GOx) obtained from directed protein evolution and wild-type enzymes. Higher glucose oxidation currents were obtained from B11-GOx both in solution and polymer electrodes compared to wt-GOx. This demonstrates an improved electrocatalytic activity towards electrochemical oxidation of glucose from the mutant enzyme. The enzyme electrode with B11-GOx also showed a faster electron transfer indicating a better electronic interaction with the polymer mediator. These encouraging results have shown a promising application of enzymes developed by directed evolution tailored for the applications of biosensors and biofuel cells.

A novel biofuel cell harvesting energy from activated human macrophages

Macrophage phagocytosis activates NADPH oxidase, an electron transport system in the plasma membrane. This study examined the feasibility of utilizing electrons transferred through the plasma membrane via NADPH oxidase to run a biofuel cell. THP-1 human monocytic cells were chemically stimulated to differentiate into macrophages. Further they were activated to induce a phagocytic response. During differentiation, cells became adherent to a plain gold electrode which was used as anode in a two-compartment fuel cell system. The current production in the fuel cell always corresponded to the NADPH oxidase activity, which was evaluated by the amount of superoxide anion produced upon stimulation in combination with the expression levels of the different NADPH oxidase subunits in cells. Moreover, our results of different inhibitory tests let us conclude that (i) the current observed in the fuel cell originates from NADPH oxidase in activated macrophages and (ii) there are multiple electron transport pathways from the cells to the electrode. One pathway involves superoxide anions produced upon stimulation, additional not yet identified electron transport occurs independently of superoxide anions.This type of novel biofuel cell driven by living human cells may eventually develop into a battery replacement for small medical devices.

Voltammetry of Pyrococcus furiosus ferritin: dependence of iron release rate on mediator potential

The electrocatalytic iron release from P. furiosus ferritin upon reduction with a series of electron mediators was studied. The observed iron release rate as a function of mediator midpoint potentials is described by a two-step model, in which electron transfer from the mediator to ferritin is rate limiting at low driving force, and the protein's overall catalytic rate of k(cat)= 701 electrons per s is limiting at high driving force (low mediator potentials). The upper limit of the mediator potential at which the reductive iron release activity of P. furiosus ferritin has been observed in the electrochemical cell is -47 mV vs. SHE.

Comparison of enzymatic recycling electrodes for measuring aminophenol: development of a highly sensitive natriuretic peptide assay system

Several redox enzymes were examined for enzymatic/electrochemical-recycling systems in order to measure p-aminophenol (PAP) with high sensitivity. Glucose oxidase (GOD) and diaphorase (DI) worked well as catalysts for recycling electrode systems: these enzymes effectively reduced p-iminoquinone (PIQ), the electrochemically-oxidized form of PAP, and caused an enhancement in the electrochemical signals (anodic currents in the voltammogram and amperogram) by approximately 100 fold. The lower detection limits for PAP were estimated to be 50 nM with the GOD system and 2 nM with the DI system. We combined the enzymatic-recycling electrode using DI with an enzyme immunoassay system to measure atrial natriuretic peptide (ANP), an important marker peptide hormone involved in heart diseases. ANPs from serum samples at ppt-levels were determined appropriately using the present assay system.