Cerium oxide nanoparticles: green synthesis and biological applications

Cerium oxide nanoparticles in wound care: a review of mechanisms and therapeutic applications

Skin wound healing is a complex and tightly regulated process. The frequent occurrence and reoccurrence of acute and chronic wounds cause significant skin damage to patients and impose socioeconomic burdens. Therefore, there is an urgent requirement to promote interdisciplinary development in the fields of material science and medicine to investigate novel mechanisms for wound healing. Cerium oxide nanoparticles (CeO2 NPs) are a type of nanomaterials that possess distinct properties and have broad application prospects. They are recognized for their capabilities in enhancing wound closure, minimizing scarring, mitigating inflammation, and exerting antibacterial effects, which has led to their prominence in wound care research. In this paper, the distinctive physicochemical properties of CeO2 NPs and their most recent synthesis approaches are discussed. It further investigates the therapeutic mechanisms of CeO2 NPs in the process of wound healing. Following that, this review critically examines previous studies focusing on the effects of CeO2 NPs on wound healing. Finally, it suggests the potential application of cerium oxide as an innovative nanomaterial in diverse fields and discusses its prospects for future advancements.

Diatom Biosilica Functionalised with Metabolically Deposited Cerium Oxide Nanoparticles

This study introduces a novel approach to synthesising a three-dimensional (3D) micro-nanostructured amorphous biosilica. The biosilica is coated with cerium oxide nanoparticles obtained from laboratory-grown unicellular photosynthetic algae (diatoms) doped metabolically with cerium. This unique method utilises the ability of diatom cells to absorb cerium metabolically and deposit it on their silica exoskeleton as cerium oxide nanoparticles. The resulting composite (Ce-DBioSiO2) combines the unique structural and photonic properties of diatom biosilica (DBioSiO2) with the functionality of immobilised CeO2 nanoparticles. The kinetics of the cerium metabolic insertion by diatom cells and the physicochemical properties of the obtained composites were thoroughly investigated. The resulting Ce-DBioSiO2 composite exhibits intense Stokes fluorescence in the violet-blue region under ultraviolet (UV) irradiation and anti-Stokes intense violet and faint green emissions under the 800 nm near-infrared excitation with a xenon lamp at room temperature in an ambient atmosphere.

Bioactivity of cerium dioxide nanoparticles as a function of size and surface features

Nano-dispersed cerium dioxide is promising for use in medicine due to its unique physicochemical properties, including low toxicity, the safety of in vivo usage, active participation in different redox processes occurring in living cells, and its regenerative potential, manifested in the ability of CeO2 to participate repeatedly in redox reactions. In this work, we examined the biological activity of cerium dioxide nanoparticles (CeO2 NPs) synthesized by precipitation in mixed water/alcohol solutions at a constant pH of 9. This synthesis method allowed controlling the size and Ce3+/Ce4+ proportion on the surface of NPs, changing the synthesis conditions and obtaining highly stable suspensions of "naked" CeO2 NPs. Changes in the surface properties upon contact of CeO2 NPs with protein-rich media, e.g., bovine serum albumin and DMEM cell culture medium supplemented with 10% fetal bovine serum, the characteristics of nanoparticle uptake by mouse aortic endothelial cells and the antioxidant activity of the nanoparticles of different sizes were investigated by various state-of-the-art analytical methods.

Systematic review of the osteogenic effect of rare earth nanomaterials and the underlying mechanisms

Rare earth nanomaterials (RE NMs), which are based on rare earth elements, have emerged as remarkable biomaterials for use in bone regeneration. The effects of RE NMs on osteogenesis, such as promoting the osteogenic differentiation of mesenchymal stem cells, have been investigated. However, the contributions of the properties of RE NMs to bone regeneration and their interactions with various cell types during osteogenesis have not been reviewed. Here, we review the crucial roles of the physicochemical and biological properties of RE NMs and focus on their osteogenic mechanisms. RE NMs directly promote the proliferation, adhesion, migration, and osteogenic differentiation of mesenchymal stem cells. They also increase collagen secretion and mineralization to accelerate osteogenesis. Furthermore, RE NMs inhibit osteoclast formation and regulate the immune environment by modulating macrophages and promote angiogenesis by inducing hypoxia in endothelial cells. These effects create a microenvironment that is conducive to bone formation. This review will help researchers overcome current limitations to take full advantage of the osteogenic benefits of RE NMs and will suggest a potential approach for further osteogenesis research.

Green Synthesis of Ceria Nanoparticles from Cassava Tubers for Electrochemical Aptasensor Detection of SARS-CoV-2 on a Screen-Printed Carbon Electrode

Green synthesis approaches for making nanosized ceria using starch from cassava as template molecules to control the particle size are reported. The results of the green synthesis of ceria with an optimum calcination temperature of 800 °C shows a size distribution of each particle of less than 30 nm with an average size of 9.68 nm, while the ratio of Ce3+ to Ce4+ was 25.6%. The green-synthesized nanoceria are applied to increase the sensitivity and attach biomolecules to the electrode surface of the electrochemical aptasensor system for coronavirus disease (COVID-19). The response of the aptasensor to the receptor binding domain of the virus was determined with the potassium ferricyanide redox system. The screen-printed carbon electrode that has been modified with green-synthesized nanoceria shows 1.43 times higher conductivity than the bare electrode, while those modified with commercial ceria increase only 1.18 times. Using an optimized parameter for preparing the aptasensors, the detection and quantification limits were 1.94 and 5.87 ng·mL-1, and the accuracy and precision values were 98.5 and 89.1%. These results show that green-synthesized ceria could be a promising approach for fabricating an electrochemical aptasensor.

CeO2 Nanoparticles to Promote Wound Healing: A Systematic Review

Cerium (Ce) is a hot topic in the field of materials research due to its electronic layer structure and the unique antioxidant abilities of its oxide (CeO2 ). Cerium oxide nanoparticles (CeO2 NPs) demonstrate their potential as an antioxidant and antibacterial agent. Current research focuses on whether they can be used to promote wound healing and in what manner. This article provides a systematic review of the various forms of CeO2 NPs that are used in wound-healing materials over the past decade, as well as the effectiveness demonstrated by in vivo and in vitro experiments, with a focus on the relationship between concentration and effectiveness. CeO2 NPs are expected to become effective ingredients in dressings that require antibacterial, antioxidant, and wound healing promoting properties. This article serves as a reference for further research and clinical applications of nano-sized CeO2 in wound healing.

Ultrasmall cerium oxide nanoparticles as highly sensitive X-ray contrast agents and their antioxidant effect

Owing to their theranostic properties, cerium oxide (CeO2) nanoparticles have attracted considerable attention for their key applications in nanomedicine. In this study, ultrasmall CeO2 nanoparticles (particle diameter = 1-3 nm) as X-ray contrast agents with an antioxidant effect were investigated for the first time. The nanoparticles were coated with hydrophilic and biocompatible poly(acrylic acid) (PAA) and poly(acrylic acid-co-maleic acid) (PAAMA) to ensure satisfactory colloidal stability in aqueous media and low cellular toxicity. The synthesized nanoparticles were characterized using high-resolution transmission electron microscopy, X-ray diffraction, Fourier transform-infrared spectroscopy, thermogravimetric analysis, dynamic light scattering, cell viability assay, photoluminescence spectroscopy, and X-ray computed tomography (CT). Their potential as X-ray contrast agents was demonstrated by measuring phantom images and in vivo CT images in mice injected intravenously and intraperitoneally. The X-ray attenuation of these nanoparticles was greater than that of the commercial X-ray contrast agent Ultravist and those of larger CeO2 nanoparticles reported previously. In addition, they exhibited an antioxidant effect for the removal of hydrogen peroxide. The results confirmed that the PAA- and PAAMA-coated ultrasmall CeO2 nanoparticles demonstrate potential as highly sensitive radioprotective or theranostic X-ray contrast agents.

Synthesis and characterisation of Zn-doped cerium oxide nanoparticles for electromagnetic radiation shielding

CeO2-NPs (nanoparticles) exhibit a variety of properties, which have prompted researchers to explore various applications, such as gas sensing, biomedical, Electromagnetic Interference (EMI) shielding, etc. Zn-doped CeO2-NPs with concentrations ranging from 7 to 11 mol were synthesised using Aloe vera extract as a reducing agent by the solution combustion method. As obtained, NPs were characterised by standard techniques. Braggs reflections confirm the formation of a single-phase cubic structure of CeO2Zn NPs. Crystalline size is calculated using both the W-H plot and the Scherrer equation, which were found to be 12 and 9 nm, respectively. The Energy-dispersive X-ray analysis (EDAX) pattern confirmed the presence of Ce, O and Zn. The direct energy band values are found to be decreasing from 3 to 2.87 eV with an increase in the doping concentration of Zn from 7 to 11 mol. Total shielding efficiency (SET) will give the best representation of shielding properties. The SEt values of CeO2Zn NPs are compared to those of other conventional materials and NP materials, finding significant applications in EMI shielding.

Evaluation of nanoceria on cadmium uptake in Triticum aestivum (L.) and its implications for dietary health risk

In recent times, significant attention has been directed toward the synthesis and application of nanoparticles (NPs) in agriculture sector. In current study, nanoceria (CeO2 NPs) synthesized by green method were employed to address cadmium (Cd) accumulation in wheat (Triticum aestivum L.) cultivated in field with excess Cd. The application of CeO2 NPs was carried out through foliar spraying, performed twice during the growth of T. aestivum. Four levels of CeO2 NPs were used: T0, T1, T2, and T3 as 0, 50, 75, and 100 mgL-1, respectively. Results highlighted the positive effects of CeO2 NPs on various growth parameters, including plant height, spike length, photosynthetic related attributes, as well as straw and grain of grains in comparison to T1 (control group). Furthermore, CeO2 NPs led to a reduction in oxidative stress in the leaves and enhanced in enzyme activities in comparison to T1. Notably, Cd concentrations in straw, roots, and grains exhibited a decline following the treatment with CeO2 NPs, in contrast to the control group. In terms of health implications, the calculated health risk index associated with dietary consumption of grains by adults remained below the defined threshold with supply of nanoparticles. Foliar application of CeO2 NPs proved to be an effective approach in reducing cadmium content in wheat grains. This reduction holds significant potential for minimizing the risk of cadmium exposure to human health through the food chain. Employing the green synthesis method amplifies the potential for extensive production and a wide array of environmental applications for CeO2 NPs. This dual capacity makes them proficient in tackling environmental stresses while concurrently mitigating adverse ecological effects.

Effect of green synthesized cerium oxide nanoparticles on fungal disease of wheat plants: A field study

Recently, there has been considerable attention towards the production of environmentally friendly nanoparticles (NPs). In this investigation, the successful synthesis of cerium oxide nanoparticles (CeO2 NPs) was achieved by employing an eco-friendly technique that utilized an extract from the leaves of local plant quinoa (Chenopodium quinoa L.). The synthesized CeO2 NPs were subjected to characterization using state-of-the-art methods. The prepared CeO2 NPs contained a round shape with clusters and have a size of 7-10 nm. To assess how effective CeO2 NPs derived from C. quinoa were against Ustilago tritici, a fungal disease that negatively affects wheat crop globally, a study was performed on two varieties of wheat crop comprised of Arooj (V1) and Akber (V2), cultivated under field conditions. CeO2 NPs were applied foliarly twice to the wheat crop at four different concentrations: T0 (0 mg/L), T1 (50 mg/L), T2 (75 mg/L), and T3 (100 mg/L). The results revealed that the control group (T0) exhibited the highest disease severity index (DSI) with a value of 75% compared to the other concentrations of CeO2 NPs on both varieties. At a concentration of 100 mg/L of CeO2 NPs, the DSI dropped to a minimum of 35% and 37% on both V1 and V2 respectively. These findings indicated that an increase in the concentration of CeO2 NPs has a beneficial impact on disease severity. Similar patterns have also been observed with disease incidence (DI), with the greatest efficacy observed at a concentration of 100 mg/L of CeO2 NPs. Our investigation has shown that CeO2 NPs exhibitd significant antifungal potential against U. tritici which may be a promising strategy to mitigate fungal disease and crop losses globally.

Transition Metal-Based Therapies for Inflammatory Diseases

Inflammatory disease (ID) is a general term that covers all diseases in which chronic inflammation performs as the major manifestation of pathogenesis. Traditional therapies based on the anti-inflammatory and immunosuppressive drugs are palliative with the short-term remission. The emergence of nanodrugs has been reported to solve the potential causes and prevent recurrences, thus holding great potential for the treatment of IDs. Among various nanomaterial systems, transition metal-based smart nanosystems (TMSNs) with unique electronic structures possess therapeutic advantages owing to their large surface area to volume ratio, high photothermal conversion efficiency, X-ray absorption capacity, and multiple catalytic enzyme activities. In this review, the rationale, design principle, and therapeutic mechanisms of TMSNs for treatments of various IDs are summarized. Specifically, TMSNs can not only be designed to scavenge danger signals, such as reactive oxygen and nitrogen species and cell-free DNA, but also can be engineered to block the mechanism of initiating inflammatory responses. In addition, TMSNs can be further applied as nanocarriers to deliver anti-inflammatory drugs. Finally, the opportunities and challenges of TMSNs are discussed, and the future directions of TMSN-based ID treatment for clinical applications are emphasized.

Structural and functional insights in polysaccharides coated cerium oxide nanoparticles and their potential biomedical applications: A review

Cerium oxide nanoparticles have now significant presence in biomedical fields due to their wide applications; however, challenges regarding their safety and biocompatibility persist. Polysaccharides based biopolymers have inherent hydroxyl and carboxyl groups, enabling them to govern the surface functionalization of cerium oxide nanoparticles, hence their chemical and physical characteristics. Because of this, polysaccharides such as dextran, alginate, pullulan, chitosan, polylactic acid, starch, and pectin are practical substitutes for the conventional coatings used to synthesize cerium oxide nanoparticles. This review discusses the effect of biopolymer coatings on the properties of cerium oxide nanoparticles, such as size, stability, aggregation, and biocompatibility. Additionally, it also summarises various biomedical applications of polysaccharides coated cerium oxide nanoparticles, such as in bone tissue regeneration, liver inflammation, wound healing, and antibacterial and anticancer activities. Biocompatible cerium oxide nanoparticles will surely improve their applications in the biomedical field.

Fungal biorecovery of cerium as oxalate and carbonate biominerals

Cerium is the most sought-after rare earth element (REE) for application in high-tech electronic devices and versatile nanomaterials. In this research, biomass-free spent culture media of Aspergillus niger and Neurospora crassa containing precipitant ligands (oxalate, carbonate) were investigated for their potential application in biorecovery of Ce from solution. Precipitation occurred after Ce3+ was mixed with biomass-free spent culture media and >99% Ce was recovered from media of both organisms. SEM showed that biogenic crystals with distinctive morphologies were formed in the biomass-free spent medium of A. niger. Irregularly-shaped nanoparticles with varying sizes ranging from 0.5 to 2 μm and amorphous biominerals were formed after mixing the carbonate-laden N. crassa supernatant, resulting from ureolysis of supplied urea, with Ce3+. Both biominerals contained Ce as the sole metal, and X-ray diffraction (XRD) and thermogravimetric analyses identified the biominerals resulting from the biomass-free A. niger and N. crassa spent media as cerium oxalate decahydrate [Ce2(C2O4)3·10H2O] and cerium carbonate [Ce2(CO3)3·8H2O], respectively. Thermal decomposition experiments showed that the biogenic Ce oxalates and carbonates could be subsequently transformed into ceria (CeO2). FTIR confirmed that both amorphous and nanoscale Ce carbonates contained carbonate (CO32-) groups. FTIR-multivariate analysis could classify the biominerals into three groups according to different Ce concentrations and showed that Ce carbonate biominerals of higher purity were produced when precipitated at higher Ce3+ concentrations. This work provides new understanding of fungal biotransformations of soluble REE species and their biorecovery using biomass-free fungal culture systems and indicates the potential of using recovered REE as precursors for the biosynthesis of novel nanomaterials.

Green synthesis of cerium oxide nanoparticles using zucchini peel extract for cytotoxic and photocatalytic properties

The aim of this study is the green synthesis of cerium oxide nanoparticles (CeO₂-NPs) using a natural capping agent and its application in water and wastewater treatment. This study presents the biosynthesis of CeO₂-NPs by the exertion of a green method using zucchini (Cucurbita pepo) extract as a capping agent. Synthesized CeO₂-NPs were distinguished through TGA/DTA, FT-IR, XRD, FESEM/TEM and EDX/PSA, and DRS procedures. According to the XRD pattern of NPs, the crystallinity structure was a face-centered cubic (fcc) with an Fm3m space group and the size was estimated at 30 nm. The spherical morphology of NPs was confirmed through FESEM/TEM images. In the following, the photocatalytic property of NPs was investigated by the decolorization of methylene blue (MB) dye within UV-A light. Also, the cytotoxicity of NPs on the CT26 cell line was evaluated through the MTT test, and no toxicity was observed in the results, which indicates their biocompatibility.

Peumus boldus Used in the Synthesis of ZnO Semiconductor Nanoparticles and Their Evaluation in Organic Contaminants

The high demand for nanomaterials in the field of industry and science has forced researchers to develop new synthesis methods that are more efficient, economical, and environmentally friendly. At present, the application of green synthesis has taken a great advantage over conventional synthesis methods because it helps with the control of the characteristics and properties of the resulting nanomaterials. In this research, ZnO nanoparticles (NPs) were synthesized by biosynthesis using dried boldo (Peumus boldus) leaves. The resulting biosynthesized NPs had a high purity, quasi-spherical shape with average sizes ranging from 15 to 30 nm and a band gap of ~2.8-3.1 eV. These NPs were used in the photocatalytic activity of three organic dyes. The results showed degradation of 100% methylene blue (MB) in 180 min, 92% methyl orange (MO) in 180 min, and 100% Rhodamine B (RhB) in 30 min of exposure. These results show that the Peumus boldus leaf extract is effective in the biosynthesis of ZnO NPs with good photocatalytic properties.

Updates on Biogenic Metallic and Metal Oxide Nanoparticles: Therapy, Drug Delivery and Cytotoxicity

The ambition to combat the issues affecting the environment and human health triggers the development of biosynthesis that incorporates the production of natural compounds by living organisms via eco-friendly nano assembly. Biosynthesized nanoparticles (NPs) have various pharmaceutical applications, such as tumoricidal, anti-inflammatory, antimicrobials, antiviral, etc. When combined, bio-nanotechnology and drug delivery give rise to the development of various pharmaceutics with site-specific biomedical applications. In this review, we have attempted to summarize in brief the types of renewable biological systems used for the biosynthesis of metallic and metal oxide NPs and the vital contribution of biogenic NPs as pharmaceutics and drug carriers simultaneously. The biosystem used for nano assembly further affects the morphology, size, shape, and structure of the produced nanomaterial. The toxicity of the biogenic NPs, because of their pharmacokinetic behavior in vitro and in vivo, is also discussed, together with some recent achievements towards enhanced biocompatibility, bioavailability, and reduced side effects. Because of the large biodiversity, the potential biomedical application of metal NPs produced via natural extracts in biogenic nanomedicine is yet to be explored.

Surface-modified cerium dioxide nanoparticles with improved anti-amyloid and preserved nanozymatic activity

Cerium dioxide nanoparticles (CeO₂ NPs) are used increasingly in nanotechnology and particularly in biotechnology and bioresearch. Thus, CeO₂ NPs have been successfully tested in vitro as a potential therapeutic agent for various pathologies associated with oxidative stress, including the formation of protein amyloid aggregates. In this study, to increase the anti-amyloidogenic efficiency and preserve the antioxidant potential, the surface of the synthesized CeO₂ NPs is modified with a nonionic, sugar-based surfactant, dodecyl maltoside (DDM), which is known for its high anti-amyloidogenic activity and biocompatibility. Dynamic light scattering and Fourier transform infrared spectroscopy demonstrated successful modification by DDM. The apparent hydrodynamic diameters of CeO₂ NPs and DDM-modified NPs (CeO₂@DDM NPs) are found to be ⁓180 nm and ⁓260 nm, respectively. A positive zeta potential value of + 30.5 mV for CeO₂ NPs and + 22.5 mV for CeO₂ @DDM NPs suggest sufficient stability and good dispersion of NPs in an aqueous solution. A combination of Thioflavin T fluorescence analysis and atomic force microscopy is used to assess the effect of nanoparticles on the formation of insulin amyloid fibrils. Results show that the fibrillization of insulin is inhibited by both, naked and modified NPs in a dose-dependent manner. However, while the IC₅₀ of naked NPs is found to be ∼270 ± 13 µg/mL, the surface-modified NPs are 50% more efficient with IC₅₀ equaled to 135 ± 7 µg/mL. In addition, both, the naked CeO₂ NPs and DDM-modified NPs displayed an antioxidant activity expressed as oxidase-, catalase- and SOD-like activity. Therefore, the resulting nanosized material is very well suited to prove or disprove the hypothesis that oxidative stress plays a role in the formation of amyloid fibrils.

Cerium oxide nanoparticles (nCeO2) exert minimal adverse effects on microbial communities in soils with and without biosolids amendment

Increased use of nano-cerium oxide (nCeO₂) in an array of industrial applications has raised environmental concerns due to potential increased loadings to the soil environment. This research investigated the potential adverse effects of nCeO₂ (10-30 nm) on the soil microbial community in two exposure scenarios: direct application to soil, and indirect application to soil through chemical spiking of biosolids, followed by mixing into soil. Total Ce in test soils without, and with biosolids amendment, ranged from 44 to 770, and 73 to 664 mg Ce kg^-1 soil, respectively. In order to help distinguish whether observed effects were elicited by the solid-phase colloids or the activity of dissolved Ce, a soluble Ce salt (Ce (NO₃)₃) treatment was included in select assays. A suite of tests was used to investigate effects on critical processes: microbial growth (heterotrophic plate count), microbial activity (organic matter (OM) decomposition, enzyme activity and, nitrification) and diversity (structural and functional). Although results showed significant inhibition on microbial growth in soil without biosolids amendment at ≥ 156 mg Ce kg^-1 soil by week 5, these results were inconsistent and non-significant thereafter. In general, nCeO₂ showed no evidence of consistent adverse effects on OM decomposition, nitrification, soil enzyme activities and functional diversity. Leucine aminopeptidase showed significant (p< 0.05) stimulatory effects over time at ≥ 44 mg Ce kg^-1 in soils without biosolids, which was not observed in soils with biosolids amendment. The lack of inhibitory effects of nCeO₂ may be attributed to its low solubility; Ce in soil extracts (0.01 M CaCl₂) were all below detection (< 0.003 mg kg^-1) in the nCeO₂-spiked soils, but detectable in the Ce (NO₃)₃ samples. In contrast, soluble Ce at 359 mg Ce kg^-1 showed a significant reduction in OM decomposition and effects on microbial genomic diversity based on the 16S rDNA data in soils with and without biosolids amendment (359 and 690 mg Ce kg^-1). The nCeO₂ behaviour and effects information described herein are expected to help fulfill data gaps for the characterization of this priority nanomaterial.

Antioxidant Nanozymes: Mechanisms, Activity Manipulation, and Applications

Antioxidant enzymes such as catalase, superoxide dismutase, and glutathione peroxidase play important roles in the inhibition of oxidative-damage-related pathological diseases. However, natural antioxidant enzymes face some limitations, including low stability, high cost, and less flexibility. Recently, antioxidant nanozymes have emerged as promising materials to replace natural antioxidant enzymes for their stability, cost savings, and flexible design. The present review firstly discusses the mechanisms of antioxidant nanozymes, focusing on catalase-, superoxide dismutase-, and glutathione peroxidase-like activities. Then, we summarize the main strategies for the manipulation of antioxidant nanozymes based on their size, morphology, composition, surface modification, and modification with a metal-organic framework. Furthermore, the applications of antioxidant nanozymes in medicine and healthcare are also discussed as potential biological applications. In brief, this review provides useful information for the further development of antioxidant nanozymes, offering opportunities to improve current limitations and expand the application of antioxidant nanozymes.

Urolithin B loaded in cerium oxide nanoparticles enhances the anti-glioblastoma effects of free urolithin B in vitro

Glioblastoma multiforme (GBM) is the most aggressive kind of malignant primary brain tumor in humans. Given the limitation of Conventional therapeutic strategy, the development of nanotechnology and natural product therapy seems to be an effective method enhancing the prognosis of GBM patients. In this research, cell viability, mRNA expressions of various apoptosis-related genes apoptosis, and generation of reactive oxygen species (ROS) in human U-87 malignant GBM cell line (U87) treated with Urolithin B (UB) and CeO₂-UB. Unlike CeO₂-NPs, both UB and CeO₂-UB caused a dose-dependent decrease in the viability of U87 cells. The half-maximal inhibitory concentration values of UB and CeO₂-UB were 315 and 250 μM after 24 h, respectively. Moreover, CeO₂-UB exerted significantly higher effects on U87 viability, P53 expression, and ROS generation. Furthermore, UB and CeO2-UB increased the accumulation of U87 cells in the SUB-G1 population, decreased the expression of cyclin D1, and increased the Bax/Bcl2 ratio expression. Collectively, these data indicate that CeO₂-UB exhibited more substantial anti-GBM effects than UB. Although further in vivo investigations are needed, these results proposed that CeO₂-NPs could be utilized as a potential novel anti-GBM agent after further studies.

Cytotoxic, Antidiabetic, and Antioxidant Study of Biogenically Improvised Elsholtzia blanda and Chitosan-Assisted Zinc Oxide Nanoparticles

In the present study, we have improvised a biogenic method to fabricate zinc oxide nanoparticles (ZnO NPs) using chitosan and an aqueous extract of the leaves of Elsholtzia blanda. Characterization of the fabricated products was carried out with the help of ultraviolet-visible, Fourier transform infrared, X-ray diffraction, field emission scanning electron microscopy, high-resolution transmission electron microscopy, selected area electron diffraction, and energy-dispersive X-ray analyses. The size of the improvised ZnO NP measured between 20 and 70 nm and had a spherical and hexagonal shape. The ZnO NPs proved to be highly effective in the antidiabetic test as the sample showed the highest percentage of enzyme inhibition at 74% ± 3.7, while in the antioxidant test, 78% was the maximum percentage of 2,2-diphenyl-1-picrylhydrazyl hydrate scavenging activity. The cytotoxic effect was investigated against the human osteosarcoma (MG-63) cell line, and the IC₅₀ value was 62.61 μg/mL. Photocatalytic efficiency was studied by the degradation of Congo red where 91% of dye degradation was observed. From the various analyses, it can be concluded that the as-synthesized NPs may be suitable for various biomedical applications as well as for environmental remediation.

Inhibition of melanoma using a nanoceria-based prolonged oxygen-generating phototherapy hydrogel

Tumor hypoxic environment is an inevitable obstacle for photodynamic therapy (PDT) of melanoma. Herein, a multifunctional oxygen-generating hydrogel loaded with hyaluronic acid-chlorin e6 modified nanoceria and calcium peroxide (Gel-HCeC-CaO2) was developed for the phototherapy of melanoma. The thermo-sensitive hydrogel could act as a sustained drug delivery system to accumulate photosensitizers (chlorin e6, Ce6) around the tumor, followed by cellular uptake mediated by nanocarrier and hyaluronic acid (HA) targeting. The moderate sustained oxygen generation in the hydrogel was produced by the reaction of calcium peroxide (CaO2) with infiltrated H2O in the presence of catalase mimetic nanoceria. The developed Gel-HCeC-CaO2 could efficiently alleviate the hypoxia microenvironment of tumors as indicated by the expression of hypoxia-inducible factor -1α (HIF-1α), meeting the “once injection, repeat irradiation” strategy and enhanced PDT efficacy. The prolonged oxygen-generating phototherapy hydrogel system provided a new strategy for tumor hypoxia alleviation and PDT.

A comprehensive proteomics analysis of the response of Pseudomonas aeruginosa to nanoceria cytotoxicity

The increased commercial use and spread of nanoceria raises concerns about the risks associated with its effects on living organisms. Although Pseudomonas aeruginosa may be ubiquitous in nature, it is largely found in locations closely linked with human activity. P. aeruginosa san ai was used as a model organism for a deeper understanding of the interaction between biomolecules of the bacteria with this intriguing nanomaterial. A comprehensive proteomics approach along with analysis of altered respiration and production of targeted/specific secondary metabolites was conducted to study the response of P. aeruginosa san ai to nanoceria. Quantitative proteomics found that proteins associated with redox homeostasis, biosynthesis of amino acids, and lipid catabolism were upregulated. Proteins from outer cellular structures were downregulated, including transporters responsible for peptides, sugars, amino acids and polyamines, and the crucial TolB protein of the Tol-Pal system, required for the structural formation of the outer membrane layer. In accordance with the altered redox homeostasis proteins, an increased amount of pyocyanin, a key redox shuttle, and the upregulation of the siderophore, pyoverdine, responsible for iron homeostasis, were found. Production of extracellular molecules, e.g. pyocyanin, pyoverdine, exopolysaccharides, lipase, and alkaline protease, was significantly increased in P. aeruginosa san ai exposed to nanoceria. Overall, nanoceria at sublethal concentrations induces profound metabolic changes in P. aeruginosa san ai and provokes increased secretion of extracellular virulence factors, revealing the powerful influence this nanomaterial has on the vital functions of the microorganism.

Role of the redox state of cerium oxide on glycine adsorption: an experimental and theoretical study

The role of the oxidation state of cerium cations in a thin oxide film in the adsorption, geometry, and thermal stability of glycine molecules was studied. The experimental study was performed for a submonolayer molecular coverage deposited in vacuum on CeO₂(111)/Cu(111) and Ce₂O₃(111)/Cu(111) films by photoelectron and soft X-ray absorption spectroscopies and supported by ab initio calculations for prediction of the adsorbate geometries, C 1s and N 1s core binding energies of glycine, and some possible products of the thermal decomposition. The molecules adsorbed on the oxide surfaces at 25 °C in the anionic form via the carboxylate oxygen atoms bound to cerium cations. A third bonding point through the amino group was observed for the glycine adlayers on CeO₂. In the course of stepwise annealing of the molecular adlayers on CeO₂ and Ce₂O₃, the surface chemistry and decomposition products were analyzed and found to relate to different reactivities of glycinate on Ce⁴⁺ and Ce³⁺ cations, observed as two dissociation channels via C-N and C-C bond scission, respectively. The oxidation state of cerium cations in the oxide was shown to be an important factor, which defines the properties, electronic structure, and thermal stability of the molecular adlayer.

Nano-decolorization of methylene blue by Phyllanthus reticulatus iron nanoparticles: an eco-friendly synthesis and its antimicrobial, phytotoxicity study

The present study was investigated to synthesis the iron nanoparticles (FeNPs) using the leaf extract of Phyllanthus reticulatus. The phytosynthesized FeNPs exhibited UV-visible absorption peaks at 229 nm and its crystalline nature was confirmed through XRD. FT-IR analysis revealed the presence of various functional groups which are responsible for the bioreduction of FeNPs. The SEM results showed that FeNPs were aggregated, irregular sphere shaped with rough surfaces and EDX spectrum recorded densely occupied iron nanoparticles region. The particle size range of the synthesized iron nanoparticles was 185.6 nm. The FeNPs showed potential methylene blue decolourisation activity which was visually observed by gradual colour change in the dye solution from deep blue to colorless. The control exhibited no change in coloration during exposure to sunlight and the iron nanoparticles completely disintegrated the methylene blue within 10 s in 10 mg/L methylene blue (98%), whereas the color change was decreased when the concentration of the dye increased. In addition, the phyto-synthesized FeNPs exhibited extensive antibacterial and antifungal activity against the selected pathogens. Phytotoxicity assay confirms the potential of biosynthesized iron nanoparticles as a fertilizer for the growth of green gram seeds. Thus the present study leads to development of cost-effective green synthesis, reduction of toxic chemicals and its extensive applications in the biological sciences.

Green microwave synthesis of ZnO and CeO2 nanorods for infectious diseases control and biomedical applications

Control of Infectious diseases such as; bacteria and viruses, has become a globally critical issue, since the appearance of COVID-19 virus in 2020. In addition to the microbial resistance of the currently available therapeutic drugs as well as, its prolonged side effects make its use is of health care concern. Green nanotechnology approach is a promising solution for controlling such infectious diseases and many biomedical purposes. In the present study, green synthesis approach based on microwave-assisted hydrothermal method is an innovative and environmentally friendly method for preparation of bioactive CeO₂ and ZnO nanorod structured materials using Olea europaea (O. e.) leaf plant extract as a natural medicinal capping agent for controlling the shape and size of nano-products. The optical and structural analyses of the obtained nanorod-structures are characterized using; TEM, FTIR, XRD, SBET analyses and particle size analyzer. The green-synthesized ZnO and CeO₂ nanorods display an average crystallite size of approximately 15 and 5 nm, respectively. The antimicrobial activity of ZnO and CeO₂ nanorods compared with the traditional hydrothermal methods, was examined on six clinical pathogens including; (E. coli Serratia sp., S. aureus, Bacillus subtilis, Streptococcus mutant, and MRSA). The results indicated superior antimicrobial and anti-tumor activities towards hepatocellular carcinoma cell lines (IC₅₀ = 117.24 and 103.50 μg mL^-1 for ZnO and CeO₂ and LD₅₀ > 3000 mg kg^-1). This demonstrates that the green microwave process is a promising approach for the synthesis of effective ZnO and CeO₂ nanomaterials applied for many biomedical applications.

Facile Green Synthesis of Ni(OH)2@Mn3O4 Cactus-Type Nanocomposite: Characterization and Cytotoxicity Properties

In the present work, the facile eco-friendly synthesis and evaluation of the anti-tumor activity of Ni(OH)₂@Mn₃O₄ nanocomposite were carried out. The synthesis of Ni(OH)₂@Mn₃O₄ nanocomposite from chia-seed extract was mediated by sonication. The obtained materials were characterized by different spectroscopic techniques such as transmission electron microscopy (TEM), scanning electron microscope (SEM), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), ultraviolet-visible (UV-Vis), and Fourier transform infrared (FT-IR) spectroscopies. The results of XRD, SEM, EDS, TEM, FT-IR, and UV-Vis analysis indicate the successful manufacturing of a crystalline, cactus-type Ni(OH)₂@Mn₃O₄ nanocomposite of 10.10 nm average particle size. XPS analysis confirms that the synthesized materials consist mainly of Ni²⁺, Mn²⁺, and Mn³⁺. The antitumor activity of the nanocomposite was tested against a breast cancer (MCF-7) cell line. The results showed Ni(OH)₂@Mn₃O₄ nanocomposite possesses insignificant cytotoxicity. The cell-death percentage was 34% at a 100 ppm concentration of Ni(OH)₂@Mn₃O₄ nanocomposite. The obtained results imply that the synthesized nanocomposite could be suitable and safe for drug delivery and water treatment.

Gold Nanoparticles Supported on Ceria Nanoparticles Modulate Leukocyte–Endothelium Cell Interactions and Inflammation in Type 2 Diabetes

Gold-ceria nanoparticles (Au/CeO2) are known to have antioxidant properties. However, whether these nanoparticles can provide benefits in type 2 diabetes mellitus (T2D) remains unknown. This work aimed to study the effects of Au/CeO2 nanoparticles at different rates of gold purity (10, 4.4, 1.79 and 0.82) on leukocyte–endothelium interactions and inflammation in T2D patients. Anthropometric and metabolic parameters, leukocyte–endothelium interactions, ROS production and NF-κB expression were assessed in 57 T2D patients and 51 healthy subjects. T2D patients displayed higher Body Mass Index (BMI) and characteristic alterations in carbohydrate and lipid metabolism. ROS production was increased in leukocytes of T2D patients and decreased by Au/CeO2 at 0.82% gold. Interestingly, Au/CeO2 0.82% modulated leukocyte–endothelium interactions (the first step in the atherosclerotic process) by increasing leukocyte rolling velocity and decreasing rolling flux and adhesion in T2D. A static adhesion assay also revealed diminished leukocyte–endothelium interactions by Au/CeO2 0.82% treatment. NF-κB (p65) levels increased in T2D patients and were reduced by Au/CeO2 treatment. Cell proliferation, viability, and apoptosis assays demonstrated no toxicity produced by Au/CeO2 nanoparticles. These results demonstrate that Au/CeO2 nanoparticles at 0.82% exert antioxidant and anti-inflammatory actions in the leukocyte–endothelium interaction of T2D patients, suggesting a protective role against the appearance of atherosclerosis and cardiovascular diseases when this condition exists.

Protective effect of cerium oxide on testicular function and oxidative stress after torsion/detorsion in adult male rats

Testicular torsion (T)/detorsion (D) can cause testicular injury due to the rotation of the spermatic cord and its vessels, therefore it represents an urological emergency that is surgically treated. Oxidative damage occurs in the testis and distant organs because of the overproduction of free radicals and overexpression of proinflammatory cytokines by reperfusion after surgery. Cerium oxide (CeO₂) nanoparticles, a material also known as nanoceria, have regenerative antioxidant properties on oxidative stress. The present study aimed to investigate the effects of nanoceria on testis tissues in testicular T/D in rats. A total of 24 rats were equally and randomly divided into four groups: Control, CeO₂, T/D and CeO2-T/D groups. Left inguinoscrotal incision was performed in the control group. In the CeO₂ group, 0.5 mg/kg CeO₂ was given intraperitoneally 30 min before inguinoscrotal incision. In the T/D group, unilateral testicular T/D was performed through an inguinoscrotal incision and rotating the left testis 720˚ clockwise, which was then left ischemic for 120 min, followed by 120 min of reperfusion. In the CeO₂-T/D group, 0.5 mg/kg CeO₂ was given intraperitoneally 30 min before testicular T/D. At the end of the experiment, testis tissues were removed for histopathological and biochemical examinations. The samples were histologically examined, Glutathione-s transferase (GST), catalase (CAT), paraoxonase (PON) activities and malondialdehyde (MDA) levels were measured via biochemical analysis methods, while the expression levels of p53, Bax and Bcl-2 were detected using immunohistochemistry. The present results revealed statistically significant inter-group differences in PON, CAT and GST activities and MDA levels. GST, CAT and PON activities were significantly higher, whereas MDA levels in the CeO₂-T/D group were significantly lower compared with those in the T/D group. The T/D group had increased Bax and decreased Bcl-2 expression levels in their seminiferous tubules compared with the control and CeO₂ groups. CeO₂ treatment led to downregulation of Bax and upregulation of Bcl-2. The expression of p53 was high in the T/D group compared with that in the control and CeO2 groups, and was upregulated in all germinal cells. However, compared with that in the T/D group, p53 expression was significantly decreased in the CeO₂-T/D group. The testicular injury score significantly increased in the CeO₂-T/D group compared with the control and CeO₂ groups. Rats in the CeO₂-T/D group demonstrated significantly milder tissue lesions compared with those in T/D group. The present findings indicated that nanoceria may protect testis in rats against the harmful effects of T/D. Further studies are required to evaluate how CeO₂ reduces oxidative stress and cell death in testis tissue that underwent T/D-related injury.

Prospects of green nanotechnology for efficient management of neurodegenerative diseases

Current theranostics for neurodegenerative diseases (NDD) management are majorly symptomatic due to a lack of identification of early-stage biomarkers and the inefficiency of drugs to penetrate through the blood-brain barrier. Recently, the Neuro-nanotechnology interface has emerged as a potential strategy for diagnosis, monitoring, and treatment of NDDs owing to smaller particle size, high specific surface area, tunable physicochemical attributes and rich surface functionalities. However, toxicity and biocompatibility are two significant challenges restricting their commercial prospect in NDD management. On the contrary, green nanosystems fabricated using plant extracts, microorganisms, biome-based precursors, repurposed-byproducts, exosomes, and protein-based bio-nanomaterials are economical, eco-friendly, biocompatible and renewable due to the abundance of biodiversity. This prospect explores the novel and cutting-edge interface of green nanosystems and NDDs for developing diagnostic and implantable devices, targeted drug delivery strategies, surgical prostheses, therapeutics, treatment, nanoscaffolds for neurogeneration, and immunity development. Besides, it discusses the challenges, alternate solutions and advanced prospects of green nanosystems with the integration of modern-age technologies for the development of sustainable green Neuro-nanotechnology for efficient management of NDDs.

Tuning Compressive Young's Moduli and Antibacterial Activities of Alginate/Poly(N-isopropylacrylamide) Hydrogels with Laponite Layers and Cerium Ions

Hybrid hydrogels containing alginate (Alg) and poly(N-isopropylacrylamide) (PNIPAAm) chains as natural and synthetic components, respectively, were crosslinked using double and triple pairs of the crosslinkers Ce³⁺/Ce⁴⁺, laponite (LP) RD, and N,N'-methylenebisacrylamide (BIS). (Alg/PNIPAAm)-Ce³⁺ and (Alg/PNIPAAm-PNIPAAm)-Ce³⁺ double- and triple-network structures were prepared using multivalent cerium ions (Ce³⁺), multifunctional laponite layers (L), and/or neutral tetrafunctonal BIS molecules (B). Compressive Young's moduli, E, were tuned by the type/concentration of crosslinkers and crosslinking procedures and the concentration of Alg chains. The antibacterial activity of positively charged ions and molecules is due to the electrostatic attraction with the negatively charged bacterial cell walls. In the current study, we report the antibacterial activity on Escherichia coli of Ce³⁺ ions in the absence and presence of gentamicin sulfate (GS) for double and triple networks. Nonbacterial areas, which are called inhibition zones, around the disks, and compressive E moduli of the single and double PNIPAAm and Alg/PNIPAAm networks crosslinked by LP RD and containing Ce³⁺/Ce⁴⁺ions in free and ionically bonded states, respectively, were higher than those of the ones crosslinked with BIS. Moreover, BIS- and LP RD-crosslinked single PNIPAAm hydrogels displayed larger inhibition zones than those of Alg/PNIPAAm hybrids, supporting the antibacterial activity of free Ce³⁺/Ce⁴⁺ ions diffused together with GS molecules. On the other hand, antibacterial activities of GS + Ce³⁺-loaded triple networks were much lower than those of their double counterparts because the increase in the structural complexity reduced the co-emission of antibacterial agents.

Recent advances in nanomaterial developments for efficient removal of Hg(II) from water

"Water" contamination by mercury Hg(II) has become the biggest concern due to its severe toxicities on public health. There are different conventional techniques like ion exchange, reverse osmosis, and filtration that have been used for the elimination of Hg(II) from the aqueous solutions. Although, these techniques have some drawbacks during the remediation of Hg(II) present in water. Adsorption could be a better option for the elimination of Hg(II) from the aqueous solutions. "Conventional adsorbents" like zeolite, clay, and activated carbons are inefficient for this purpose. Recently, nanomaterials have attracted attention for the elimination of Hg(II) from the aqueous solutions due to high porosity, better surface properties, and high efficiency. In this review, a thorough discussion has been carried out on the synthesis and characterization of nanomaterials along with mechanisms involved in the elimination of Hg(II) from aqueous solutions.

Green Nanotechnology: Recent Research on Bioresource-Based Nanoparticle Synthesis and Applications

In the last decades, the idea of green nanotechnology has been expanding, and researchers are developing greener and more sustainable techniques for synthesizing nanoparticles (NPs). The major objectives are to fabricate NPs using simple, sustainable, and cost-effective procedures while avoiding the use of hazardous materials that are usually utilized as reducing or capping agents. Many biosources, including plants, bacteria, fungus, yeasts, and algae, have been used to fabricate NPs of various shapes and sizes. The authors of this study emphasized the most current studies for fabricating NPs from biosources and their applications in a wide range of fields. This review addressed studies that cover green techniques for synthesizing nanoparticles of Ag, Au, ZnO, CuO, Co3O4, Fe3O4, TiO2, NiO, Al2O3, Cr2O3, Sm2O3, CeO2, La2O3, and Y2O3. Also, their applications were taken under consideration and discussed.

Inorganic Nanomaterials Versus Polymer-Based Nanoparticles for Overcoming Neurodegeneration

Neurodegenerative disorders (NDs) affect a great number of people worldwide and also have a significant socio-economic impact on the aging population. In this context, nanomedicine applied to neurological disorders provides several biotechnological strategies and nanoformulations that improve life expectancy and the quality of life of patients affected by brain disorders. However, available treatments are limited by the presence of the blood–brain barrier (BBB) and the blood–cerebrospinal fluid barrier (B–CSFB). In this regard, nanotechnological approaches could overcome these obstacles by updating various aspects (e.g., enhanced drug-delivery efficiency and bioavailability, BBB permeation and targeting the brain parenchyma, minimizing side effects). The aim of this review is to carefully explore the key elements of different neurological disorders and summarize the available nanomaterials applied for neurodegeneration therapy looking at several types of nanocarriers. Moreover, nutraceutical-loaded nanoparticles (NPs) and synthesized NPs using green approaches are also discussed underling the need to adopt eco-friendly procedures with a low environmental impact. The proven antioxidant properties related to several natural products provide an interesting starting point for developing efficient and green nanotools useful for neuroprotection.

Eco-friendly synthesis of cobalt-zinc ferrites using quince extract for adsorption and catalytic applications: An approach towards environmental remediation

Cobalt-zinc ferrite nanoparticles were synthesized using environmentally friendly approach with quince extract as a reducing agent. Crystal structure and morphology of the obtained materials were studied by XRD, SEM-EDS, Mössbauer and IR spectroscopy. The synthesized nanoparticles have a cubic spinel structure and crystallite size ranging from 5 to 9 nm. The infrared spectra contain characteristic absorption bands for the M_A-O (∼560 cm^-1) and M_B-O bonds (∼420 cm^-1). Force constants were calculated for both tetrahedral and octahedral bonds. As the Co content increases, the force constant for the tetrahedral bond increases and the force constant for the octahedral bond decreases. The obtained ferrite nanoparticles have good magnetization as shown by VSM (in the range from 36 to 67 emu/g). Magnetic nanoparticles Co_xZn_1-xFe₂O₄ were also tested for induction heating with electromagnetic field. The sample with x (Co) = 0.4 has the highest specific absorption rate. The synthesized samples were tested as adsorbents using the Congo Red dye as model pollutant. The best adsorbent was pure zinc ferrite with the adsorption capacity of 24.7 mg/g. The catalytic activity of the obtained ferrites for the decomposition of H₂O₂ was studied as well. The most active catalyst was pure cobalt ferrite. Probably, the active centers are octahedral cobalt ions. Thus, the obtained magnetic nanoparticles can be used for the adsorptive removal of pollutants, catalytic decomposition of the H₂O₂ and low-frequency hyperthermia.

Dual-Functional Antioxidant and Antiamyloid Cerium Oxide Nanoparticles Fabricated by Controlled Synthesis in Water-Alcohol Solutions

Oxidative stress is known to be associated with a number of degenerative diseases. A better knowledge of the interplay between oxidative stress and amyloidogenesis is crucial for the understanding of both, aging and age-related neurodegenerative diseases. Cerium dioxide nanoparticles (CeO₂ NPs, nanoceria) due to their remarkable properties are perspective nanomaterials in the study of the processes accompanying oxidative-stress-related diseases, including amyloid-related pathologies. In the present work, we analyze the effects of CeO₂ NPs of different sizes and Ce⁴⁺/Ce³⁺ ratios on the fibrillogenesis of insulin, SOD-like enzymatic activity, oxidative stress, biocompatibility, and cell metabolic activity. CeO₂ NPs (marked as Ce1–Ce5) with controlled physical–chemical parameters, such as different sizes and various Ce⁴⁺/Ce³⁺ ratios, are synthesized by precipitation in water–alcohol solutions. All synthesized NPs are monodispersed and exhibit good stability in aqueous suspensions. ThT and ANS fluorescence assays and AFM are applied to monitor the insulin amyloid aggregation and antiamyloid aggregation activity of CeO₂ NPs. The analyzed Ce1–Ce5 nanoparticles strongly inhibit the formation of insulin amyloid aggregates in vitro. The bioactivity is analyzed using SOD and MTT assays, Western blot, fluorescence microscopy, and flow cytometry. The antioxidative effects and bioactivity of nanoparticles are size- or valence-dependent. CeO₂ NPs show great potential benefits for studying the interplay between oxidative stress and amyloid-related diseases, and can be used for verification of the role of oxidative stress in amyloid-related diseases.

Influence of cerium oxide nanoparticles on dairy effluent nitrate and phosphate bioremediation

This study investigated, for the first time, the role of cerium oxide nanoparticles (CeO₂ NPs) on dairy effluent nitrate and phosphate bioremediation using different inoculum sources. Two inoculum sources (wastewater and sludge) were obtained from the dairy wastewater treatment plant unit. A culture was prepared to be tested in the treatment of nitrate and phosphate effluent, and the role of CeO₂ NPs was checked to be completely efficient after 5 days of incubation. The reduction efficiency of nitrate using sludge as inoculum source was improved up to 89.01% and 68.12% for phosphate compared to control. In the case of using wastewater as an inoculum source, the nitrate reduction was improved up to 83.30% and 87.75% for phosphate compared to control. The bacterial richness showed a significant variance (higher richness) between control and other samples. The optimal concentration of CeO₂ NPs for inoculum richness and nitrate and phosphate reduction was (sludge: 1 × 10^-10 ppm) and (wastewater: 1 × 10^-12 ppm). The results revealed that CeO₂ NPs could enhance the microbial growth of different inoculum sources that have a key role in dairy effluent nitrate and phosphate bioremediation.

Pairing 3D-Printing with Nanotechnology to Manage Metabolic Syndrome

Introduction

This work was aimed to develop a Curcuma oil-based self-nanoemulsifying drug delivery system (SNEDDS) 3D-printed polypills containing glimepiride (GMD) and rosuvastatin (RSV) for treatment of dyslipidemia in patients with diabetes as a model for metabolic syndrome (MS).

Methods

Compartmentalized 3D printed polypills were prepared and studied in streptozotocin/poloxamer induced diabetic/dyslipidemic rats. The pharmacokinetic parameters of GMD and RSV in the prepared polypills were evaluated. Blood glucose level, lipid profile, antioxidant, and biochemical markers activities were investigated. Also, histopathological examination of the liver and pancreas was carried out. The atherosclerotic index, the area of islets of Langerhans, and liver steatosis lesion scores were calculated.

Results

The developed SNEDDS-loaded GMD/RSV polypills showed acceptable quality control characteristics with a high relative bioavailability of 217.16% and 224.28% for GMD and RSV, respectively, when compared with the corresponding non-SNEDDS pills. The prepared polypills showed dramatic lowering in blood glucose levels and substantial improvement in lipid profile and hepatic serum biomarkers as well as remarkable decrease in serum antioxidants in response to Poloxamer 407 intoxication. The prepared polypills decreased the risk of atherosclerosis and coronary disease by boosting the level of high-density lipoprotein and lowering both triglyceride and low-density lipoprotein. Microscopic examination showed normal hepatic sinusoids and high protection level with less detectable steatosis in the examined hepatocytes. Normal size pancreatic islets with apparently normal exocrine acini and pancreatic duct were also noticed.

Conclusion

This formulation strategy clearly shows the potential of the developed polypills in personalized medicine for treatment of patients with MS.