Microplastics in wastewater treatment plants: Sources, properties, removal efficiency, removal mechanisms, and interactions with pollutants

The significant impact of MPs in the industrial/municipal effluents on the MPs abundance in the Nakdong River, South Korea

Owing to extensive plastic consumption, wastewater from households, business establishments, and industrial activities have been recognised as a significant contributor to microplastics (MPs) in aquatic environments. This case study represents the first investigation of MPs in the Nakdong River, Republic of Korea, that traverses through the largest industrial complex midstream and densely populated cities of Daegu and Busan downstream before flowing into the sea. Monitoring of MP abundance in effluents discharged from three municipal, two industrial, and one livestock wastewater treatment plant (WWTP) into the Nakdong River was conducted over four seasons from August 2022 to April 2023. Identification and quantification of MPs were performed using micro-Fourier transform infrared spectrometry. Seasonal variation in MPs in the Nakdong River was found to be strongly influenced by the nearest upstream WWTPs and rivers, exhibiting a linear relationship that decreased gradually with increasing distance from the WWTPs. The average concentrations of MPs in the six effluent sources ranged from 101 ± 13 to 490 ± 240 particles/L during the yearly monitoring period, while MP concentrations in the river ranged between 79 ± 25 and 120 ± 43 particles/L. Industrial effluents contained higher amounts of discharged MPs (314 ± 78 particles/L) than municipal sources (201 ± 61 particles/L). Notably, two municipal WWTPs, located in the highly densely populated city, discharged the highest total MP amounts per day and released the greatest volumes of effluents. This study provides valuable insights into the monitoring and impact of effluents on MPs in rivers, which could inform MP treatment and management strategies for in river and marine environments.

Microplastics in wastewater and sludge from centralized and decentralized wastewater treatment plants: Effects of treatment systems and microplastic characteristics

Domestic wastewater treatment plants (WWTPs) play a vital role in limiting the release of microplastics (MP) into the environment. This study examined MP removal efficiency from five centralized and four decentralized domestic WWTPs in Bangkok, Thailand. MP concentrations in wastewater and sludge were comparable between centralized and decentralized WWTPs, despite these decentralized WWTPs serving smaller populations and having limited treatment capacity. The elimination of MPs ranged from 50 to 96.8% in centralized WWTPs and 14.2-53.6% in decentralized WWTPs. It is noted that the retained MPs concentrations in sludge ranged from 20,000 to 228,100 MP/kg dry weight. The prevalence of synthetic fibers and fragments could be attributed to their pathways from laundry or car tires, and the accidental release of a variety of plastic wastes ended up in investigated domestic WWTPs. Removal of MPs between the centralized and decentralized WWTPs was influenced by several impact factors including initial MP concentrations, longer retention times, MP fragmentation, and variations of MP concentrations in sludge leading to different activated sludge process configurations. Sewage sludge has become a primary location for the accumulation of incoming microplastics in WWTPs. The MPs entering and leaving each unit process were varied due to the unique characteristics of MPs, and their different treatment efficiencies. While the extended hydraulic retention period in decentralized WWTPs decreased the MP removal efficacy, the centralized WWTP with the two-stage activated sludge process achieved the highest MP removal efficiency.

Limitations of wastewater treatment plants in removing trace anthropogenic biomarkers and future directions: A review

This review highlights the limitations faced by conventional wastewater treatment plants (WWTPs) in effectively removing contaminants of emerging concern (CECs), heavy metals (HMs), and Escherichia coli (E. coli). This emphasises the limitations of current treatment methods and advocates for innovative approaches to enhance the removal efficiency. By following the PRISMA guidelines, the study systematically reviewed relevant literature on detecting and remedying these pollutants in wastewater treatment facilities. Conventional wastewater treatment plants struggle to eliminate CECs, HMs, and E. coli owing to their small size, persistence, and complex nature. The review suggests upgrading WWTPs with advanced tertiary processes to significantly improve contaminant removal. This calls for cost-effective treatment parameters and standardised assessment techniques to enhance the fate of MPs in WWTPs and WRRFs. It recommends integrating insights from mass-balance model studies on MPs in WWTP to overcome modelling challenges and ensure model reliability. In conclusion, this review underscores the urgent need for advancements in wastewater treatment processes to mitigate the environmental impact of trace anthropogenic biomarkers. Future efforts should focus on conducting comprehensive studies, implementing advanced treatment methods, and optimising management practices in WWTPs and WRRFs.

Pollution of Beach Sands of the Ob River (Western Siberia) with Microplastics and Persistent Organic Pollutants

Microplastics (MPs) in aquatic environments can be associated with various substances, including persistent organic pollutants, which add to the problem of plastic ecotoxicity. The abundance of 1-5 mm microplastics and concentrations of particle-adsorbed organochlorine pesticides (OCPs) and polychlorinated biphenyls (PCBs) in sandy sediments from three beaches in recreational areas along the upper Ob River in Western Siberia were assessed. MP pollution levels in the Ob River beach sands ranged from 24 ± 20.7 to 104 ± 46.2 items m-2 or, in terms of mass concentration, from 0.26 ± 0.21 to 1.22 ± 0.39 mg m-2. The average abundance of MP particles reached 0.67 ± 0.58 items kg-1 or 8.22 ± 6.13 μg kg-1 in the studied sediments. MP concentrations were significantly higher in number (p < 0.05) and mass (p < 0.01) at the riverbank site downstream of the Novosibirsk wastewater treatment plant (WWTP) outfall compared to these at the upstream and more distant beaches. Most MPs (70-100%) were represented by irregularly shaped fragments. The polymer composition of MPs varied between sites, with a general predominance of polyethylene (PE). The study revealed associations of MPs with PCBs and OCPs not previously detected in the riverbed and beach sediments, suggesting that these substances are circulating in the Ob River basin. Although MP concentrations were higher downstream of the WWTP, the maximum levels of particle-associated OCPs were observed in the beach sands of the site farthest from the urban agglomeration. The pesticides γ-HCH, 4,4-DDT, and 4,4-DDE were detected on MPs at relatively low concentrations. PCBs were more abundant in the studied samples, including 118 dioxin-like congener. The results obtained indicate that the Ob River is susceptible to plastic and persistent organic pollutant (POP) contamination and serve as a starting point for further studies and practical solutions to the problem.

Influence of ongoing discharge from multiple wastewater treatment plants on microplastic patterns in small-scale receiving rivers

As widely acknowledged, wastewater treatment plants (WWTPs) stand as significant contributors to the presence of microplastics in surface water. Nonetheless, there exists a notable research gap regarding the extent of potential pollution resulting from the concurrent and uninterrupted discharges originating from multiple WWTPs into small-scale receiving water bodies. This study endeavors to address this knowledge deficit by conducting a thorough investigation into the prevalence of microplastics in surface water. The research encompasses seven distinct locations within the Changzhou section of the Beijing-Hangzhou Grand Canal and the effluent of three WWTPs situated along the tributary. The results indicate differences in the distribution of microplastics in surface waters of mainstream and tributaries. While the microplastic abundance and composition showed little variation along the main stream, the tributaries displayed an overall increasing trend in microplastic abundance from upstream to downstream. Notably, the major contributors to this increase were fragments, fiber particles, and microplastics with particle sizes ranging from 100 to 300 μm. Considering that the primary distinction between the tributaries and the mainstream is the presence of the three WWTPs along the tributaries, the study conducted a correlation analysis between river surface water and effluents from these plants. The results indicated a stronger correlation between the tributaries and the effluents, suggesting that WWTPs are one of the primary factors contributing to the elevated levels of microplastics in the tributaries. Finally, a comparative analysis of microplastic abundance in the Beijing-Hangzhou Grand Canal's Changzhou section and other regions was conducted. The findings revealed that the microplastic pollution level in the Beijing-Hangzhou Grand Canal's Changzhou section is higher than that in most other rivers. Therefore, the issue of microplastic pollution in the Beijing-Hangzhou Grand Canal's Changzhou section warrants our attention, particularly with regard to the effectiveness of microplastic removal by the WWTPs along its course.

Tracing microplastic pollution in Mahi River estuary, Gulf of Khambhat, Gujarat, and their influence on functional traits of macrobenthos

Most maritime habitats contain microplastic (MPs) contamination. The quality of the benthic ecosystem's habitat is declining as MPs accumulate in marine system. The contamination of MPs must therefore be investigated. We studied MPs pollution in the Mahi River, estuary, and macrobenthos. In the present study, the abundance of MPs fragments gradually decreased from the high tide zone to the low tide zone and muddy sediment has high MPs concentrations due to sediment characteristics and particle size. The majority of sediment and biota MPs were fibrous and black. MPs in both silt and biota have identical chemical compositions (modified cellulose), shapes, and colors. A significant source of pollutants and MPs fluxing into the ocean is well within the river system. Perinereis aibuhitensis ingested the most MPs out of 11 species, whereas Amphipods did not show any presence of MPs. Our findings showed that functional characteristics are essential for macrobenthos MPs intake. MPs in macrobenthos are high due to biological functions such as feeding, ecological groups, feeding mechanisms, body size, and bioturbation. MPs in marine sediment and organisms are tracked down to the Mahi River exceeding 50 km. The present work has investigated the idea that the macrobenthos that live in the sediment are ingesting the MPs that are building up there and this ingestion relies on the macrobenthos' functional characteristics.

Microplastics removal in wastewater treatment plants: A review of the different approaches to limit their release in the environment

In last 10 years, the interest about the presence of microplastics (MPs) in the environment has strongly grown. Wastewaters function as a carrier for MPs contamination from source to the aquatic environment, so the knowledge of the fate of this emerging contaminant in wastewater treatment plants (WWTPs) is a priority. This work aims to review the presence of MPs in the influent wastewater (WW) and the effectiveness of the treatments of conventional WWTPs. Moreover, the negative impacts of MPs on the management of the processes have been also discussed. The work also focuses on the possible approaches to tackle MPs contamination enhancing the effectiveness of the WWTPs. Based on literature results, despite WWTPs are not designed for MPs removal from WW, they can effectively remove the MPs (up to 99 % in some references). Nevertheless, they normally act as "hotspots" of MPs contamination considering the remaining concentration of MPs in WWTPs' effluents can be several orders of magnitude higher than receiving waters. Moreover, MPs removed from WW are concentrated in sewage sludge (potentially >65 % of MPs entering the WWTP) posing a concern in case of the potential reuse as a soil improver. This work aims to present a paradigm shift intending WWTPs as key barriers for environmental protection. Approaches for increasing effectiveness against MPs have been discussed in order to define the optimal point(s) of the WWTP in which these technologies should be located. The need of a future legislation about MPs in water and sludge is discussed.

A review on cigarette butts: Environmental abundance, characterization, and toxic pollutants released into water from cigarette butts

Every year, trillions of cigarette butts (CBs) are discarded into the environment. CBs are frequently found on beaches and in urban areas worldwide due to their high resistance to physical and biological degradation. Components of CBs, such as heavy metals, polycyclic aromatic hydrocarbons (PAHs), cellulose acetate fibers (microplastics), nicotine, aromatic amines, and BTEX (benzene, toluene, ethylbenzene, and xylene), are released into aquatic environments. Harmful components released into water from CBs cause both water pollution and toxic effects on different aquatic organisms. In the first part of this review, studies investigating the density of CBs in different environments were reviewed. In the second part, the results of studies investigating the characteristics of cigarette filters using characterization techniques were reviewed. Then, studies on heavy metals, PAHs, microplastics (microfibers), nicotine, aromatic amines and BTEX released into water from CBs were reviewed, and factors affecting the types, amounts and release conditions of compounds (pollutants) released into water from CBs were discussed. In the last section, taking into account the studies carried out to date, deficiencies in the research on pollutants released into water from CBs were identified and recommendations were made for future studies. This review highlights the environmental abundance of CBs, the characterization results of CB filters, and the release into water of some substances in CBs that are pollutants for the aquatic environment. This review may serve as a guide to elucidate the environmental abundance of CBs, the characteristics of CBs/filters, and the concentration in water of some pollutants released into water from CBs.

Microfiber emission from a municipal wastewater treatment plant in Hungary

Since the ingestion of both natural and anthropogenic microfibers produces a deleterious effect on aquatic organisms, it is crucial to explore the emission of these pollutants by WWTPs into the receiving water bodies, such as rivers. Cellulose- and petroleum-based microfibers, as well as microplastic particles, were collected from the effluent of a municipal WWTP operating with activated sludge technology in Budapest, Hungary. During two sampling campaigns organized in February and April of 2023 on different working days and at different times of the day, 123-145 L of effluent was sieved and filtered. The organic matter was removed by hydrogen-peroxide treatment. All fibers and particles larger than 10 µm were counted, and using a fluorescence microscope, the fibers were geometrically characterized in terms of length and diameter. Each fiber was individually identified by transflection-FT-IR method. The fiber concentration varied in the range of 1.88-2.84 and 4.25-6.79 items/L during the 7th and the 16th week of 2023, respectively. In February and April, the proportion of microfibers in the solid particles was 78.3 and 94.7%, respectively. In the effluent the cellulose-based microfibers were dominant (53-91%), while among the petroleum-based microfibers, polyester occurred most often. The median length of cellulose-based fibers was considerably higher in April than in February (650 vs. 1250 µm), and simultaneously the median diameter also increased from 21 to 29 µm. This behaviour was also seen, albeit to a lesser extent, in connection to microfibers derived from petroleum. The treated wastewater's daily microfiber transport to the Danube River varied between 0.44 - 0.69 and 0.94-1.53 billion in February and April 2023, respectively.

Microplastics contamination in water supply system and treatment processes

Due to global demand, millions of tons of plastics have been widely consumed, resulting in the widespread entry of vast amounts of microplastic particles into the environment. The presence of microplastics (MPs) in water supplies, including bottled water, has undergone systematic review, assessing the potential impacts of MPs on humans through exposure assessment. The main challenges associated with current technologies lie in their ability to effectively treat and completely remove MPs from drinking and supply water. While the risks posed by MPs upon entering the human body have not yet been fully revealed, there is a predicted certainty of negative impacts. This review encompasses a range of current technologies, spanning from basic to advanced treatments and varying in scale. However, given the frequent detection of MPs in drinking and bottled water, it becomes imperative to implement comprehensive management strategies to address this issue effectively. Consequently, integrating current technologies with management options such as life-cycle assessment, circular economy principles, and machine learning is crucial to eliminating this pervasive problem.

Time-varying microplastic contributions of a large urban and industrial area to river sediments

The quantification of microplastic (MP) pollution in rivers is often constrained by a lack of historical data on a multi-decadal scale, which hinders the evaluation of public policies. In this study, MP contents and trends were analyzed in dated sediment cores sampled upstream and downstream of a large metropolis, in environmental deposits that exhibited consistent sedimentation patterns from the 1980s to 2021. After a thorough sedimentological analysis, MPs were quantified in samples by micro Fourier Transform InfraRed spectroscopy (μFTIR imaging) and a density separation and organic matter digestion procedure. Microplastics recorded in the upstream core are relatively ubiquitous all along the dated sequence. The results also confirmed a sever increase of microplastics levels in the downstream core, by one order of magnitude, and an increase of polymer types. Polypropylene, polyethylene, and polystyrene represent ubiquitous contamination and were predominant at the two stations, whereas polyvinyl chloride and polytetrafluoroethylene were suspected to be abundant at the downstream station, but were not detected at the upstream station. Their presence could be linked to local contamination from specific industrial sources that manufactured and utilized these polymers. Surprisingly, in the downstream station sediment has recorded a relative improvement in polymers associated with industrial sources since the 2000s and, to a lesser extent, for ubiquitous ones since the 2010s. This trend of mitigation diverges from that of global assessments, that assume uncontrolled MP pollution, and suggest that European Union wastewater policy and regulation on industrial discharges have positively influenced water quality, and certainly also on MPs. However, the accumulation of microplastics remains high in recent deposits and raises the emerging concern of the long-term management of these reservoirs.

A review of microplastics in wastewater treatment plants in Türkiye: Characteristics, removal efficiency, mitigation strategies for microplastic pollution and future perspective

The effluent of WWTPs is an important source of microplastics (MP) for the aquatic environment. In this review study, MPs in wastewater treatment plants (WWTP) in Türkiye and their removal from WWTPs are reviewed for the first time. First, MP characteristics in the influent and effluent of WWTPs in Türkiye are discussed. In the next section, the abundance of MPs in the influent and effluent of WWTPs in Türkiye and the MP removal efficiency of WWTPs in Türkiye are evaluated. Then, the results of studies on MP abundance and characteristics in Türkiye's aquatic environments are presented and suggestions are made to reduce MPs released from WWTPs into the receiving environments. Strategies for reducing MPs released to the receiving environment from WWTPs of Türkiye are summarized. In the last section, research gaps regarding MPs in WWTPs in Türkiye are identified and suggestions are made for future studies. This review paper provides a comprehensive assessment of the abundance, dominant characteristics, and removal of MPs in WWTPs in Türkiye, as well as the current status and deficiencies in Türkiye. Therefore, this review can serve as a scientific guide to improve the MP removal efficiency of WWTPs in Türkiye.

Removal of microplastics in food packaging industry wastewaters with electrocoagulation process: Optimization by Box-Behnken design

Currently, the vast majority of studies on microplastics (MPs) focus on determining the quantity and presence of these particles in various receiving environments and their treatment in domestic wastewater treatment plants. However, little research has been conducted on the treatment of microplastics in industrial effluent. Therefore, in this study, effluent samples from the cooling water tank of a local food packaging manufacturing company were analyzed to determine the presence and quantity of MPs for the first time. MPs removal from industrial wastewater using the electrocoagulation (EC) method was optimized using the Box Behnken Design (BBD). A second-order model was developed to estimate the microplastic removal efficiency, and the R2, adjusted R2, and predicted R2 of the model were 0.9994, 0.9985, and 0.9962, respectively. The optimal reaction parameters resulting in the maximum removal rate of microplastics (99 %) were determined to be pH 6.74, current density of 3.16 mA cm-2, and duration of 13.58 min. The cost of microplastic treatment per m3 of wastewater in the EC system, operated under optimal conditions, was calculated as 0.125 $. In this study, it was concluded that the EC process is a highly efficient technique for the removal of MPs from industrial wastewater at a low cost. Determining the most favorable conditions with BBD for the EC process at the feasibility stage of treatment plants will provide economic benefits and increase treatment efficiency during the installation of large-scale plants.

Exploration of microplastic concentration in indoor and outdoor air samples: Morphological, polymeric, and elemental analysis

Microplastics are ubiquitously pervasive throughout the environment, but unlike aquatic and terrestrial microplastics, airborne microplastics have received less scientific attention. This study is the first of its kind to explicitly examine microplastics in the indoor and outdoor air (PM2.5) samples collected using active air samplers in Islamabad, Pakistan. The suspected synthetic particles were analyzed using ATR-FTIR, μ-Raman and SEM-EDX to categorize them based on their morphological characteristics, polymeric composition, and elemental makeup. Microplastics were found in all indoor and outdoor air samples, with indoor air samples (4.34 ± 1.93 items/m3) being significantly more contaminated than outdoor air samples (0.93 ± 0.32 items/m3) (P < 0.001). Among all the indoor air samples, samples taken from classroom (6.12 ± 0.51 items/m3) were more contaminated than samples taken from hallway (4.94 ± 0.78 items/m3) and laboratory (1.96 ± 0.44 items/m3). Fibers were found to be the prevalent shape type in indoor and outdoor airborne microplastics followed by fragments. Transparent- and black colored microplastic particles were predominant in both indoor and outdoor air samples. According to ATR-FTIR analysis, polyethylene terephthalate (PET), polyethylene (PE), polypropylene (PP), and polystyrene (PS) were the most prevalent polymer types in both indoor and outdoor environments. Results from μ-Raman analysis corroborated the presence of the polymers identified by ATR-FTIR. Morphological analysis of particles by SEM indicated signs of weathering on particles' surface i.e., grooves, breaks, shredded edges, pits etc. SEM-EDX of randomly chosen particles unraveled the presence of C and O as core elements, along with the presence of heavy metals at some spots due to foreign material adhering to their surface. Correlation analysis of environmental factors i.e., PM2.5, relative humidity, temperature, and wind speed with MPs abundance revealed non-significant relationships. The findings of this study call for further research on airborne MPs to better comprehend their dispersion, toxicity, interactions with other air pollutants, and attributable health risks.

Abundance, characterization, and removal of microplastics in different technology-based sewage treatment plants discharging into the middle stretch of the Ganga River, India

Sewage treatment plants (STPs) are considered as a prominent source for releasing microplastics (MPs) into the riverine systems. Though MPs abundance and removal efficacy in different secondary treatment technique-based STPs have been extensively studied worldwide, such studies are scarce in Indian conditions. Herein, this study comprehensively assesses MPs abundance, characterization, and their removal in the selected secondary treatment technique-based STPs discharging into the middle stretch of the Ganga River in India. MPs concentration (n/L) in influent and effluent of the STPs varied between 42 ± 10 to 150 ± 19 and 3 ± 1 to 22 ± 5, respectively. Overall, the primary treatment stage was observed to remove MPs by 23-42 %, while the secondary treatment stage removed MPs by 67-90 %. Selected technique-based STPs exhibited varying MPs removal efficacies as follows: SBR (94 %), TF (90 %), AL (88 %), UASB (87 %), ASP (85 %), FAB (84 %), and Bio-tower (77 %). MPs ranging from 50 to 250 μm were the dominant sizes, with PP, PE, and PS being the prevalent polymers. The Ganga River receives about 3 × 108 MPs/day from STP effluents, and an estimated 4.5 × 107 MPs/day are released via the sludge. This comprehensive assessment of MPs abundance and removal from different technology-based Indian STPs will allow the comparison of the generated dataset with similar studies worldwide.

Immune and inflammatory responses of human macrophages, dendritic cells, and T-cells in presence of micro- and nanoplastic of different types and sizes

Environmental pollution by microplastics (MPs) is a growing concern regarding their impact on aquatic and terrestrial systems and human health. Typical exposure routes of MPs are dermal contact, digestion, and inhalation. Recent in vitro and in vivo studies observed alterations in immunity after MPs exposure, but systemic studies using primary human immune cells are scarce. In our investigation, we addressed the effect of polystyrene (PS) and poly methyl methacrylate (PMMA) in three different sizes (50-1100 nm) as well as amino-modified PS (PS-NH2; 50 nm) on cells of the adaptive and innate immune system. T-cells isolated from human peripheral blood mononuclear cells (PBMCs) were least affected regarding the cytotoxicity but displayed increased activation marker expression after 72 h, and strongly modulated cytokine secretion patterns. Conversely, phagocytic dendritic cells and macrophages derived from isolated monocytes were highly sensitive to pristine MPs. Their marker expression suggested a downregulation of the inflammatory phenotypes indicative of M2 macrophage induction after MPs exposure for 24 h. Our results showed that even pristine MPs affected immune cell function and inflammatory phenotype dependent on MPs polymers, size, and immune cell type.

Macro- and microplastic abundance from recreational beaches along the South Aegean Sea (Türkiye)

This study aimed to evaluate the abundance and diversity of macro- and microplastics in sand samples collected during summer and winter from eight different beaches used for recreational purposes located on the South Aegean coasts of Türkiye. According to the results, microplastic in fiber shape was dominant on all the beaches. The highest microplastic abundance was determined at Ölüdeniz Kumburnu Beach (360.00 ± 237.66 particles kg-1 dw) in summer and at Aktur Beach (358.33 ± 397.24 particles kg-1 dw) in winter. A significant positive correlation was found in the winter between microplastic amounts and wind speed. The study area is an important touristic center faraway from major cities and industrial areas. Thus, plastic pollution in this area may be the result of tourism activities in the summer, discharge waters from wastewater treatment plants or transportation by meteorological factors (like waves, wind or river flows).

A review of microplastic removal from water and wastewater by membrane technologies

Microplastics (MPs) cannot be completely removed from water/wastewater in conventional wastewater treatment plants (WWTPs) and drinking water treatment plants (DWTPs). According to the literature analysis, membrane technologies, one of the advanced treatment technologies, are the most effective and promising technologies for MP removal from water and wastewater. In this paper, firstly, the properties of MPs commonly present in WWTPs/DWTPs and the MP removal efficiency of WWTPs/DWTPs are briefly reviewed. In addition, research studies on MP removal from water/wastewater by microfiltration (MF), ultrafiltration (UF), nanofiltration (NF), reverse osmosis (RO), and membrane bioreactors (MBRs) are reviewed. In the next section, membrane filtration is compared with other methods used for MP removal from water/wastewater, and the advantages/disadvantages of the removal methods are discussed. Moreover, the problem of membrane fouling with MPs during filtration and the potential for MP release from polymeric membrane structure to water/wastewater are discussed. Finally, based on the studies in the literature, the current status and research deficiencies of MP removal by membrane technologies are identified, and recommendations are made for further studies.

Responses of activated sludge under a short-term exposure to facial scrub microbeads: implications from treatment performance and higher-life microbial population dynamics

In this study, four identical laboratory-scale sequencing batch reactors (SBRs) were continuously operated with different concentrations of microbeads (MBs) (5,000-15,000 MBs/L) to investigate the stress-responses of activated sludge under the MB exposure. It was found that the overall treatment performance (organic removal) of SBRs was fairly affected by short-term exposure to low levels of MBs; however, it was adversely affected as the concentration of MBs increased. The average concentration of mixed liquor suspended solids and heterotrophic bacteria in the reactor fed with 15,000 MBs/L were 16 and 30% less than in the pristine control reactor, respectively. Batch experiments further demonstrated that fairly low concentrations of MBs favored the development of dense microbial structures. Further increasing the MB concentrations to 15,000 MBs/L, however, distinctly weakened the settling performance of sludge. Morphological observations revealed suppressed uniformity, strength, and integrity of flocs reactors with the addition of MBs. Microbial community analyses revealed that the abundance of protozoan species declined 37.5, 58, and 64%, respectively, when SBRs were exposed to 5,000; 10,000; and 15,000 MBs/L as compared with the control reactor. The present work provided new insight into the possible effects of MBs on the performances and operational parameters of activated sludge.

Abundance and characteristics of microplastics in drinking water treatment plants, distribution systems, water from refill kiosks, tap waters and bottled waters

Limited research studies have revealed the presence of microplastics (MPs) of different polymer types, shapes, and sizes in drinking water sources, influents of drinking water treatment plants (DWTPs), effluents of DWTPs, tap water, and bottled water. Reviewing the available information on MP pollution in waters, which is becoming more worrying in correlation with the increasing plastic production in the world every year, is noteworthy for understanding the current situation, identifying the deficiencies in the studies, and taking the necessary measures for public health as soon as possible. Therefore, this paper, in which the abundance, characteristics, and removal efficiencies of MPs in the processes from raw water to tap water and/or bottled water are reviewed is a guide for dealing with MP pollution in drinking water. In this paper, firstly, the sources of MPs in raw waters are briefly reviewed. In addition, the abundance, and characteristics (polymer type, shape, and size) of MPs in influents and effluents of DWTPs in different countries are reviewed and the effects of treatment stages (coagulation, flocculation, sedimentation, sand filtration, disinfection, and membrane filtration) of DWTPs on MP removal efficiency and the factors that are effective in removal are discussed. Moreover, studies on the factors affecting MP release from drinking water distribution systems (DWDSs) to treated water and the abundance and characteristics of MPs in tap water, bottled water and water from refill kiosks are reviewed. Finally, the deficiencies in the studies dealing with MPs in drinking water were identified and recommendations for future studies are presented.