Challenges and Perspectives of Polyhydroxyalkanoate Production From Microalgae/Cyanobacteria and Bacteria as Microbial Factories: An Assessment of Hybrid Biological System

A Review of Polyhydroxyalkanoates: Characterization, Production, and Application from Waste

The search for alternatives to petrochemical plastics has intensified, with increasing attention being directed toward bio-based polymers (bioplastics), which are considered healthier and more environmentally friendly options. In this review, a comprehensive overview of polyhydroxyalkanoates (PHAs) is provided, including their characterization, applications, and the mechanisms underlying their biosynthesis. PHAs are natural polyesters produced by a wide range of prokaryotic and some eukaryotic organisms, positioning them as a significant and widely studied type of bioplastic. Various strategies for the production of PHAs from agroindustrial waste, such as cacao shells, cheese whey, wine, wood, and beet molasses, are reviewed, emphasizing their potential as sustainable feedstocks. Industrial production processes for PHAs, including the complexities associated with extraction and purification, are also examined. Although the use of waste materials offers promise in reducing costs and environmental impact, challenges remain in optimizing these processes to enhance efficiency and cost-effectiveness. The need for continued research and development to improve the sustainability and economic viability of PHA production is emphasized, positioning PHAs as a viable and eco-friendly alternative to conventional petroleum-based plastics.

Two-step polyhydroxybutyrate production from hydrogenic effluent by freshwater microalgae Coelastrella sp. KKU-P1 and Acutodesmus sp. KKU-P2 under mixotrophic cultivation

This study aimed to produce PHB using hydrogenic effluent discharged from the biohydrogen production process with freshwater microalgae including Coelastrella sp. KKU-P1, and Acutodesmus sp. KKU-P2. Batch experiments explored the influence of initial pH and hydrogenic effluent concentration, revealing optimal conditions at 10 % (v/v) effluent concentration and a pH of 6.5 for both KKU-P1 and KKU-P2. Subsequently, medium formulation and photoperiods were optimized to maximize biomass and PHB accumulation. The results showed that the optimal condition for PHB accumulation with KKU-P1 and KKU-P2 was nitrogen phosphorus (NP)-limited Bold's Basal Medium (BBM) under dark conditions. A two-step PHB accumulation in the upscale bioreactor was investigated under optimal conditions. The results showed that KKU-P1 achieved maximum PHB, protein, carbohydrate, and lipid contents of 4.57 %, 29.37 %, 24.76 %, and 13.21 %, respectively, whereas KKU-P2 achieved 6.35 %, 31.53 %, 16.16 %, and 4.77 %, respectively. Based on these findings, it appears that a mixotrophic approach under nutrient-limiting conditions is effective for PHB production in both KKU-P1 and KKU-P2 strains.

Deciphering the genetic landscape of enhanced poly-3-hydroxybutyrate production in Synechocystis sp. B12

BACKGROUND

Microbial biopolymers such as poly-3-hydroxybutyrate (PHB) are emerging as promising alternatives for sustainable production of biodegradable bioplastics. Their promise is heightened by the potential utilisation of photosynthetic organisms, thus exploiting sunlight and carbon dioxide as source of energy and carbon, respectively. The cyanobacterium Synechocystis sp. B12 is an attractive candidate for its superior ability to accumulate high amounts of PHB as well as for its high-light tolerance, which makes it extremely suitable for large-scale cultivation. Beyond its practical applications, B12 serves as an intriguing model for unravelling the molecular mechanisms behind PHB accumulation.

RESULTS

Through a multifaceted approach, integrating physiological, genomic and transcriptomic analyses, this work identified genes involved in the upregulation of chlorophyll biosynthesis and phycobilisome degradation as the possible candidates providing Synechocystis sp. B12 an advantage in growth under high-light conditions. Gene expression differences in pentose phosphate pathway and acetyl-CoA metabolism were instead recognised as mainly responsible for the increased Synechocystis sp. B12 PHB production during nitrogen starvation. In both response to strong illumination and PHB accumulation, Synechocystis sp. B12 showed a metabolic modulation similar but more pronounced than the reference strain, yielding in better performances.

CONCLUSIONS

Our findings shed light on the molecular mechanisms of PHB biosynthesis, providing valuable insights for optimising the use of Synechocystis in economically viable and sustainable PHB production. In addition, this work supplies crucial knowledge about the metabolic processes involved in production and accumulation of these molecules, which can be seminal for the application to other microorganisms as well.

The biotechnological potential of the Chloroflexota phylum

In the next decades, the increasing material and energetic demand to support population growth and higher standards of living will amplify the current pressures on ecosystems and will call for greater investments in infrastructures and modern technologies. A valid approach to overcome such future challenges is the employment of sustainable bio-based technologies that explore the metabolic richness of microorganisms. Collectively, the metabolic capabilities of Chloroflexota, spanning aerobic and anaerobic conditions, thermophilic adaptability, anoxygenic photosynthesis, and utilization of toxic compounds as electron acceptors, underscore the phylum's resilience and ecological significance. These diverse metabolic strategies, driven by the interplay between temperature, oxygen availability, and energy metabolism, exemplify the complex adaptations that enabled Chloroflexota to colonize a wide range of ecological niches. In demonstrating the metabolic richness of the Chloroflexota phylum, specific members exemplify the diverse capabilities of these microorganisms: Chloroflexus aurantiacus showcases adaptability through its thermophilic and phototrophic growth, whereas members of the Anaerolineae class are known for their role in the degradation of complex organic compounds, contributing significantly to the carbon cycle in anaerobic environments, highlighting the phylum's potential for biotechnological exploitation in varying environmental conditions. In this context, the metabolic diversity of Chloroflexota must be considered a promising asset for a large range of applications. Currently, this bacterial phylum is organized into eight classes possessing different metabolic strategies to survive and thrive in a wide variety of extreme environments. This review correlates the ecological role of Chloroflexota in such environments with the potential application of their metabolisms in biotechnological approaches.

New insights into Chlorella vulgaris applications

Environmental pollution is a big challenge that has been faced by humans in contemporary life. In this context, fossil fuel, cement production, and plastic waste pose a direct threat to the environment and biodiversity. One of the prominent solutions is the use of renewable sources, and different organisms to valorize wastes into green energy and bioplastics such as polylactic acid. Chlorella vulgaris, a microalgae, is a promising candidate to resolve these issues due to its ease of cultivation, fast growth, carbon dioxide uptake, and oxygen production during its growth on wastewater along with biofuels, and other productions. Thus, in this article, we focused on the potential of Chlorella vulgaris to be used in wastewater treatment, biohydrogen, biocement, biopolymer, food additives, and preservation, biodiesel which is seen to be the most promising for industrial scale, and related biorefineries with the most recent applications with a brief review of Chlorella and polylactic acid market size to realize the technical/nontechnical reasons behind the cost and obstacles that hinder the industrial production for the mentioned applications. We believe that our findings are important for those who are interested in scientific/financial research about microalgae.

Comprehensive understanding of the mutant 'giant' Arthrospira platensis developed via ultraviolet mutagenesis

Introduction

Cyanobacteria are typically of a size that can be observed under a microscope. Here, we present cyanobacteria of a size that can be observed with the naked eye. Arthrospira platensis NCB002 strain showed differentiated morphological characteristics compared to previously reported Arthrospira spp.

Methods

Arthrospira platensis NCB002 was obtained by the UV irradiation of Arthrospira sp. NCB001, which was isolated from freshwater and owned by NCell Co., Ltd. A. platensis NIES-39 was obtained from the National Institute for Environmental Studies (Tsukuba, Japan). We used various analytical techniques to determine its overall characteristics.

Results and discussion

The draft genome of strain NCB002 consists of five contigs comprising 6,864,973 bp with a G+C content of 44.3 mol%. The strain NCB002 had an average length of 11.69 ± 1.35 mm and a maximum of 15.15 mm, which is 23.4-50.5 times longer than the length (0.3-0.5 mm) of previously known Arthrospira spp., allowing it to be harvested using a thin sieve. Transcriptome analysis revealed that these morphological differences resulted from changes in cell wall formation mechanisms and increased cell division. Our results show that NCB002 has outstanding industrial value and provides a comprehensive understanding of it.

Bacterial diversity of biofilms on polyhydroxybutyrate exposed to marine conditions: Ex-situ vs. in-situ tests

Biofilms form on any available surface and, depending on the characteristics of the material and the environmental conditions, biodegradation can take place. We compared the bacterial composition of polyhydroxybutyrate (PHB)-related biofilm communities from marine ex-situ and in-situ tests to assess the differences in diversity and abundance between these two biofilms. This comparison will help to better assess the transferability of tank tests to real-life scenarios. The in-situ tests were set up in the Mediterranean Sea on the Island of Elba, Italy where PHB-tensile bars were lodged in the sediments. This created a water-exposed aerobic and mud-planted anaerobic scenario. The ex-situ tests were modeled after in-situ tests and performed in temperature-controlled tanks. The PHB-related biofilms were harvested after 240 days of exposure along with planktonic bacteria, and particle- and sediment-related biofilm. The bacterial composition was elucidated using 16S rDNA sequencing. Biofilms harvested from the in-situ test were more diverse, less even, and contained more rare species compared to biofilms from the ex-situ test. The PHB-related biofilm was characterized by a higher abundance of the bacterial order Desulfobacterales. The composition of PHB-related biofilm varied significantly between the two tests and between aerobic and anaerobic conditions. The composition of PHB-related biofilm was significantly different from planktonic bacteria, particle, and sediment-related biofilm, showing the influence of PHB on the biofilm composition. Thus, the ex-situ tank test for PHB degradation cannot, in terms of bacterial composition, simulate the in-situ conditions to their full extent.

Exploring the Role of Green Microbes in Sustainable Bioproduction of Biodegradable Polymers

Research efforts have shifted to creating biodegradable polymers to offset the harmful environmental impacts associated with the accumulation of non-degradable synthetic polymers in the environment. This review presents a comprehensive examination of the role of green microbes in fostering sustainable bioproduction of these environment-friendly polymers. Green microbes, primarily algae and cyanobacteria, have emerged as promising bio-factories due to their ability to capture carbon dioxide and utilize solar energy efficiently. It further discusses the metabolic pathways harnessed for the synthesis of biopolymers such as polyhydroxyalkanoates (PHAs) and the potential for genetic engineering to augment their production yields. Additionally, the techno-economic feasibility of using green microbes, challenges associated with the up-scaling of biopolymer production, and potential solutions are elaborated upon. With the twin goals of environmental protection and economic viability, green microbes pave the way for a sustainable polymer industry.

Microbial PolyHydroxyAlkanoate (PHA) Biopolymers-Intrinsically Natural

Global pollution from fossil plastics is one of the top environmental threats of our time. At their end-of-life phase, fossil plastics, through recycling, incineration, and disposal result in microplastic formation, elevated atmospheric CO₂ levels, and the pollution of terrestrial and aquatic environments. Current regional, national, and global regulations are centered around banning plastic production and use and/or increasing recycling while ignoring efforts to rapidly replace fossil plastics through the use of alternatives, including those that occur in nature. In particular, this review demonstrates how microbial polyhydroxyalkanoates (PHAs), a class of intrinsically natural polymers, can successfully remedy the fossil and persistent plastic dilemma. PHAs are bio-based, biosynthesized, biocompatible, and biodegradable, and thus, domestically and industrially compostable. Therefore, they are an ideal replacement for the fossil plastics pollution dilemma, providing us with the benefits of fossil plastics and meeting all the requirements of a truly circular economy. PHA biopolyesters are natural and green materials in all stages of their life cycle. This review elaborates how the production, consumption, and end-of-life profile of PHAs are embedded in the current and topical, 12 Principles of Green Chemistry, which constitute the basis for sustainable product manufacturing. The time is right for a paradigm shift in plastic manufacturing, use, and disposal. Humankind needs alternatives to fossil plastics, which, as recalcitrant xenobiotics, contribute to the increasing deterioration of our planet. Natural PHA biopolyesters represent that paradigm shift.

Exploring the Feasibility of Cell-Free Synthesis as a Platform for Polyhydroxyalkanoate (PHA) Production: Opportunities and Challenges

The extensive utilization of traditional petroleum-based plastics has resulted in significant damage to the natural environment and ecological systems, highlighting the urgent need for sustainable alternatives. Polyhydroxyalkanoates (PHAs) have emerged as promising bioplastics that can compete with petroleum-based plastics. However, their production technology currently faces several challenges, primarily focused on high costs. Cell-free biotechnologies have shown significant potential for PHA production; however, despite recent progress, several challenges still need to be overcome. In this review, we focus on the status of cell-free PHA synthesis and compare it with microbial cell-based PHA synthesis in terms of advantages and drawbacks. Finally, we present prospects for the development of cell-free PHA synthesis.

Microalgae in Bioplastic Production: A Comprehensive Review

The current era of industrialization includes a constantly increasing demand for plastic products, but because plastics are rarely recycled and are not biodegradable plastic pollution or "white pollution" has been the result. The consumption of petroleum-based plastics will be 20% of global annual oil by 2050, and thus there is an inevitable need to find an innovative solution to reduce plastic pollution. The biodegradable and environmentally benign bioplastics are suitable alternative to fossil-based plastics in the market due to sustainability, less carbon footprint, lower toxicity and high degradability rate. Microalgal species is an innovative approach to be explored and improved for bioplastic production. Microalgae are generally present in abundant quantity in our ecosystem, and polysaccharide in the algae can be processed and utilized to make biopolymers. Also, these species have a high growth rate and can be easily cultivated in wastewater streams. The review aims to determine the recent status of bioplastic production techniques from microalgal species and also reveal optimization opportunities involved in the process. Several strategies for bioplastic production from algal biomass are being discussed nowadays, and the most prominent are "with blending" (blending of algal biomass with bioplastics and starch) and "without blending" (microalgae as a feedstock for polyhydroxyalkanoates production). The advanced research on modern bioengineering techniques and well-established genetic tools like CRISPR-Cas9 should be encouraged to develop recombinant microalgae strains with elevated levels of PHA/PHB inside the cell.

Performance of production of polyhydroxyalkanoates from food waste fermentation with Rhodopseudomonas palustris

The use of waste as a carbon source can significantly reduce the cost of production of Polyhydroxyalkanoates (PHAs). In this study, an acidified hydrolysate solution derived from food waste (FW) was used as a carbon source for the synthesis of PHAs by Rhodopseudomonas palustris (R. palustris) and optimized the process parameters. The results showed that the PHAs yield reached 48.62% under optimal conditions (an incubation time of 30 days, volatile fatty acids (VFAs) in substrate concentration of 2202.21 mg⋅L^-1, an initial pH of 8.0, and inoculum concentration of 15%). The fraction of VFAs affects the composition of PHAs, R. palustris first uses VFAs with an even number of carbons to synthesize poly(3-hydroxybutyrate)(3HB), and later uses VFAs with an odd number of carbons to synthesize poly-3-hydroxyvalerate (3HV). Pathways for the synthesis of PHAs by R. palustris were inferred. R. palustris is a strain with the potential to synthesize PHAs.

Commercialization potential of agro-based polyhydroxyalkanoates biorefinery: A technical perspective on advances and critical barriers

The exponential increase in the use and careless discard of synthetic plastics has created an alarming concern over the environmental health due to the detrimental effects of petroleum based synthetic polymeric compounds. Piling up of these plastic commodities on various ecological niches and entry of their fragmented parts into soil and water has clearly affected the quality of these ecosystems in the past few decades. Among the many constructive strategies developed to tackle this global issue, use of biopolymers like polyhydroxyalkanoates as sustainable alternatives for synthetic plastics has gained momentum. Despite their excellent material properties and significant biodegradability, polyhydroxyalkanoates still fails to compete with their synthetic counterparts majorly due to the high cost associated with their production and purification thereby limiting their commercialization. Usage of renewable feedstocks as substrates for polyhydroxyalkanoates production has been the thrust area of research to attain the sustainability tag. This review work attempts to provide insights about the recent developments in the production of polyhydroxyalkanoates using renewable feedstock along with various pretreatment methods used for substrate preparation for polyhydroxyalkanoates production. Further, the application of blends based on polyhydroxyalkanoates, and the challenges associated with the waste valorization based polyhydroxyalkanoates production strategy is elaborated in this review work.

Assessing and reducing phenotypic instability in cyanobacteria

Cyanobacteria have promising potential as sustainable cell factories. However, one challenge that is still largely unreported in scaling-up cyanobacteria bioproduction is phenotypic instability, where the emergence and selection of nonproducing cells leading to loss in production has longer evolutionary timescales to take place in industrial-scale bioreactors. Quantifying phenotypic instability early on in strain development allows researchers to make informed decisions on whether to proceed with scalable designs, or if present, devise countermeasures to reduce instability. One particularly effective strategy to mitigate instability is the use of genome-scale metabolic models to design growth-coupled production strains. In silico studies have predicted that creating certain cofactor imbalances or removing recycling reactions in cyanobacteria can be exploited to stably produce a wide variety of metabolites.

Characterization of Planktochlorella nurekis Extracts and Virucidal Activity against a Coronavirus Model, the Murine Coronavirus 3

Certain members of the Coronaviridae family have emerged as zoonotic agents and have recently caused severe respiratory diseases in humans and animals, such as SARS, MERS, and, more recently, COVID-19. Antivirals (drugs and antiseptics) capable of controlling viruses at the site of infection are scarce. Microalgae from the Chlorellaceae family are sources of bioactive compounds with antioxidant, antiviral, and antitumor activity. In the present study, we aimed to evaluate various extracts from Planktochlorella nurekis in vitro against murine coronavirus-3 (MHV-3), which is an essential human coronavirus surrogate for laboratory assays. Methanol, hexane, and dichloromethane extracts of P. nurekis were tested in cells infected with MHV-3, and characterized by UV-vis spectrophotometry, nuclear magnetic resonance (NMR) spectroscopy, ultraperformance liquid chromatography-mass spectrometry (UPLC-MS), and the application of chemometrics through principal component analysis (PCA). All the extracts were highly efficient against MHV-3 (more than a 6 Log unit reduction), regardless of the solvent used or the concentration of the extract, but the dichloromethane extract was the most effective. Chemical characterization by spectrophotometry and NMR, with the aid of statistical analysis, showed that polyphenols, carbohydrates, and isoprene derivatives, such as terpenes and carotenoids have a more significant impact on the virucidal potential. Compounds identified by UPLC-MS were mainly lipids and only found in the dichloromethane extract. These results open new biotechnological possibilities to explore the biomass of P. nurekis; it is a natural extract and shows low cytotoxicity and an excellent antiviral effect, with low production costs, highlighting a promising potential for development and implementation of therapies against coronaviruses, such as SARS-CoV-2.

Sustainability and carbon neutralization trends in microalgae bioenergy production from wastewater treatment: A review

Reducing CO2 emissions using biomass is gaining popularity as an environmentally friendly strategy. Due to high growth rates, low production costs, and ability to withstand harsh conditions, microalgae have become quite popular. Microalgae may also undertake photosynthesis, converting CO2 and solar energy into sugar before becoming biomass, making them an excellent source of renewable and promising biofuels. CO2 sequestration and biofixation was utilized to compare the synthesis of biodiesel as a third-generation biofuel from various types of wastewater was also used as a source for the algal cultivation. This review article focuses on recent developments, research discoveries in the field of microalgal CO2 capture modification and the optimization of conversion efficiency. This review is intended to serve as a helpful and reference for the use of wastewater treatment with microalgae to collect CO2. The overarching objective of this study is to assist wastewater treatment systems in achieving carbon neutrality.

Revalorization of Microalgae Biomass for Synergistic Interaction and Sustainable Applications: Bioplastic Generation

Microalgae and cyanobacteria are photosynthetic microorganisms’ sources of renewable biomass that can be used for bioplastic production. These microorganisms have high growth rates, and contrary to other feedstocks, such as land crops, they do not require arable land. In addition, they can be used as feedstock for bioplastic production while not competing with food sources (e.g., corn, wheat, and soy protein). In this study, we review the macromolecules from microalgae and cyanobacteria that can serve for the production of bioplastics, including starch and glycogen, polyhydroxyalkanoates (PHAs), cellulose, polylactic acid (PLA), and triacylglycerols (TAGs). In addition, we focus on the cultivation of microalgae and cyanobacteria for wastewater treatment. This approach would allow reducing nutrient supply for biomass production while treating wastewater. Thus, the combination of wastewater treatment and the production of biomass that can serve as feedstock for bioplastic production is discussed. The comprehensive information provided in this communication would expand the scope of interdisciplinary and translational research.

Microbial autotrophic biorefineries: Perspectives for biopolymer production

The use of autotrophic microorganisms to fabricate biochemical products has attracted much attention in both academia and industry. Unlike heterotrophic microorganisms that require carbohydrates and amino acids for growth, autotrophic microorganisms have evolved to utilize either light (photoautotrophs) or chemical compounds (chemolithotrophs) to fix carbon dioxide (CO2) and drive metabolic processes. Several biotechnological approaches, including synthetic biology and metabolic engineering, have been proposed to harness autotrophic microorganisms as a sustainable/green production platform for commercially essential products such as biofuels, commodity chemicals, and biopolymers. Here, we review the recent advances in natural autotrophic microorganisms (photoautotrophic and chemoautotrophic), focusing on the biopolymer production. We present current state-of-the-art technologies to engineer autotrophic microbial cell factories for efficient biopolymer production.

Microalgal Biomass as Feedstock for Bacterial Production of PHA: Advances and Future Prospects

The search for biodegradable plastics has become the focus in combating the global plastic pollution crisis. Polyhydroxyalkanoates (PHAs) are renewable substitutes to petroleum-based plastics with the ability to completely mineralize in soil, compost, and marine environments. The preferred choice of PHA synthesis is from bacteria or archaea. However, microbial production of PHAs faces a major drawback due to high production costs attributed to the high price of organic substrates as compared to synthetic plastics. As such, microalgal biomass presents a low-cost solution as feedstock for PHA synthesis. Photoautotrophic microalgae are ubiquitous in our ecosystem and thrive from utilizing easily accessible light, carbon dioxide and inorganic nutrients. Biomass production from microalgae offers advantages that include high yields, effective carbon dioxide capture, efficient treatment of effluents and the usage of infertile land. Nevertheless, the success of large-scale PHA synthesis using microalgal biomass faces constraints that encompass the entire flow of the microalgal biomass production, i.e., from molecular aspects of the microalgae to cultivation conditions to harvesting and drying microalgal biomass along with the conversion of the biomass into PHA. This review discusses approaches such as optimization of growth conditions, improvement of the microalgal biomass manufacturing technologies as well as the genetic engineering of both microalgae and PHA-producing bacteria with the purpose of refining PHA production from microalgal biomass.

Engineering microbial systems for the production and functionalization of biomaterialsBiomaterials engineering with microorganisms

A new trend in biomaterials synthesis is harnessing the production of microorganisms, owing to the low cost and sustainability. Because microorganisms use DNA as a production code, it is possible for humans to reprogram these cells and thus build living factories for the production of biomaterials. Over the past decade, advances in genetic engineering have enabled the development of various intriguing biomaterials with useful properties, with commercially available biomaterials representing only a few of these. In this review, we discuss the common strategies for the production of bulk and commodity biogenic polymers, and highlight several notable approaches such as modular protein engineering and pathway optimization in achieving these goals. We finally investigate the available synthetic biology tools that allow engineering of living materials, and discuss how this emerging class of materials has expanded the application scope of biomaterials.

Green Chemistry, Biocatalysis, and the Chemical Industry of the Future

In the movement to decarbonize our economy and move away from fossil fuels we will need to harness the waste products of our activities, such as waste lignocellulose, methane, and carbon dioxide. Our wastes need to be integrated into a circular economy where used products are recycled into a manufacturing carbon cycle. Key to this will be the recycling of plastics at the resin and monomer levels. Biotechnology is well suited to a future chemical industry that must adapt to widely distributed and diverse biological chemical feedstocks. Our increasing mastery of biotechnology is allowing us to develop enzymes and organisms that can synthesize a widening selection of desirable bulk chemicals, including plastics, at commercially viable productivities. Integration of bioreactors with electrochemical systems will permit new production opportunities with enhanced productivities and the advantage of using a low-carbon electricity from renewable and sustainable sources.

Current strategies on algae-based biopolymer production and scale-up

The craving for an alternative to the existing plastic products gives rise to the concept of algae-based bioplastic production, which appears to be excellently biodegradable and cost-effective. The significant assortment of algal biopolymers draws great attention to stop the surge of plastic waste and to mitigate the burning problems of environmental pollution. The polyhydroxyalkanoates (PHA) are naturally-occurring biopolymers found in the form of esters accumulated within a number of microbes, which provides the pillar for several biomolecules. This review summarizes the global scenario as well as the precise technique of algae-based PHA extraction and bioplastic production. In addition, different techniques for valorisation of PHA production, its biodegradability and its commercial applications are also taken into consideration.

Photoautotrophic and Mixotrophic Cultivation of Polyhydroxyalkanoate-Accumulating Microalgae Consortia Selected under Nitrogen and Phosphate Limitation

Microalgae consortia were photoautotrophically cultivated in sequencing batch photobioreactors (SBPRs) with an alteration of the normal growth and starvation (nutrient limitation) phases to select consortia capable of polyhydroxyalkanoate (PHA) accumulation. At the steady state of SBPR operation, the obtained microalgae consortia, selected under nitrogen and phosphate limitation, accumulated up to 11.38% and 10.24% of PHA in their biomass, which was identified as poly(3-hydroxybutyrate) (P3HB). Photoautotrophic and mixotrophic batch cultivation of the selected microalgae consortia was conducted to investigate the potential of biomass and PHA production. Sugar source supplementation enhanced the biomass and PHA production, with the highest PHA contents of 10.94 and 6.2%, and cumulative PHA productions of 100 and 130 mg/L, with this being achieved with sugarcane juice under nitrogen and phosphate limitation, respectively. The analysis of other macromolecules during batch cultivation indicated a high content of carbohydrates and lipids under nitrogen limitation, while higher protein contents were detected under phosphate limitation. These results recommended the selected microalgae consortia as potential tools for PHA and bioresource production. The mixed-culture non-sterile cultivation system developed in this study provides valuable information for large-scale microalgal PHA production process development following the biorefinery concept.

Sustainable production of polyhydroxybutyrate from autotrophs using CO2 as feedstock: Challenges and opportunities

Due to industrialization and rapid increase in world population, the global energy consumption has increased dramatically. As a consequence, there is increased consumption of fossil fuels, leading to a rapid increase in CO₂ concentration in the atmosphere. This accumulated CO₂ can be efficiently used by autotrophs as a carbon source to produce chemicals and biopolymers. There has been increasing attention on the production of polyhydroxybutyrate (PHB), a biopolymer, with focus on reducing the production cost. For this, cheaper renewable feedstocks, molecular tools, including metabolic and genetic engineering have been explored to improve microbial strains along with process engineering aspects for scale-up of PHB production. This review discusses the recent advents on the utilization of CO₂ as feedstock especially by engineered autotrophs, for sustainable production of PHB. The review also discusses the innovations in cultivation technology and process monitoring while understanding the underlying mechanisms for CO₂ to biopolymer conversion.

Microalgae Xanthophylls: From Biosynthesis Pathway and Production Techniques to Encapsulation Development

In the last 20 years, xanthophylls from microalgae have gained increased scientific and industrial interests. This review highlights the essential issues that concern this class of high value compounds. Firstly, their chemical diversity as the producer microorganisms was detailed. Then, the use of conventional and innovative extraction techniques was discussed. Upgraded knowledge on the biosynthetic pathway of the main xanthophylls produced by photosynthetic microorganisms was reviewed in depth, providing new insightful ideas, clarifying the function of these active biomolecules. In addition, the recent advances in encapsulation techniques of astaxanthin and fucoxanthin, such as spray and freeze drying, gelation, emulsification and coacervation were updated. Providing information about these topics and their applications and advances could be a help to students and young researchers who are interested in chemical and metabolic engineering, chemistry and natural products communities to approach the complex thematic of xanthophylls.