Inclusion bodies: not that bad…

Oxidative refolding by Copper-catalyzed air oxidation consistently increases the homogeneity and activity of a Novel Interleukin-2 mutein

Interleukin-2 (IL-2) has been used in cancer treatment for over 30 years. However, due to its high toxicity, new mutant variants have been developed. These variants retain some of the biological properties of the original molecule but offer other therapeutic advantages. At the Center of Molecular Immunology, the IL-2 no-alpha mutein, an IL-2 agonist with lower toxicity than wtIL-2, has been designed, produced, and is currently being evaluated in a Phase I/II clinical trial. The mutein is produced in E. coli as an insoluble material that must be refolded in vitro to yield a fully active protein. Controlled oxidation steps are essential in the purification process of recombinant proteins produced in E. coli to ensure the proper formation of the disulfide bonds in the molecules. In this case, the new purification process includes a copper-catalyzed air oxidation step to induce disulfide bond establishment. The optimal conditions of pH, copper, protein and detergent concentration for this step were determined through screening. The produced protein demonstrated a conserved 3D structure, higher purity, and greater biological activity than the obtained by established process without the oxidation step. Four batches were produced and evaluated, demonstrating the consistency of the new process.

Structural Stabilization of Clinically Oriented Oligomeric Proteins During their Transit through Synthetic Secretory Amyloids

Developing time-sustained drug delivery systems is a main goal in innovative medicines. Inspired by the architecture of secretory granules from the mammalian endocrine system it has generated non-toxic microscale amyloid materials through the coordination between divalent metals and poly-histidine stretches. Like their natural counterparts that keep the functionalities of the assembled protein, those synthetic structures release biologically active proteins during a slow self-disintegration process occurring in vitro and upon in vivo administration. Being these granules formed by a single pure protein species and therefore, chemically homogenous, they act as highly promising time-sustained drug delivery systems. Despite their enormous clinical potential, the nature of the clustering process and the quality of the released protein have been so far neglected issues. By using diverse polypeptide species and their protein-only oligomeric nanoscale versions as convenient models, a conformational rearrangement and a stabilization of the building blocks during their transit through the secretory granules, being the released material structurally distinguishable from the original source is proved here. This fact indicates a dynamic nature of secretory amyloids that act as conformational arrangers rather than as plain, inert protein-recruiting/protein-releasing granular depots.

Online monitoring of protein refolding in inclusion body processing using intrinsic fluorescence

Inclusion bodies (IBs) are protein aggregates formed as a result of overexpression of recombinant protein in E. coli. The formation of IBs is a valuable strategy of recombinant protein production despite the need for additional processing steps, i.e., isolation, solubilization and refolding. Industrial process development of protein refolding is a labor-intensive task based largely on empirical approaches rather than knowledge-driven strategies. A prerequisite for knowledge-driven process development is a reliable monitoring strategy. This work explores the potential of intrinsic tryptophan and tyrosine fluorescence for real-time and in situ monitoring of protein refolding. In contrast to commonly established process analytical technology (PAT), this technique showed high sensitivity with reproducible measurements for protein concentrations down to 0.01 g L- 1 . The change of protein conformation during refolding is reflected as a shift in the position of the maxima of the tryptophan and tyrosine fluorescence spectra as well as change in the signal intensity. The shift in the peak position, expressed as average emission wavelength of a spectrum, was correlated to the amount of folding intermediates whereas the intensity integral correlates to the extent of aggregation. These correlations were implemented as an observation function into a mechanistic model. The versatility and transferability of the technique were demonstrated on the refolding of three different proteins with varying structural complexity. The technique was also successfully applied to detect the effect of additives and process mode on the refolding process efficiency. Thus, the methodology presented poses a generic and reliable PAT tool enabling real-time process monitoring of protein refolding.

Distinct types of intramitochondrial protein aggregates protect mitochondria against proteotoxic stress

Mitochondria consist of hundreds of proteins, most of which are inaccessible to the proteasomal quality control system of the cytosol. How cells stabilize the mitochondrial proteome during challenging conditions remains poorly understood. Here, we show that mitochondria form spatially defined protein aggregates as a stress-protecting mechanism. Two different types of intramitochondrial protein aggregates can be distinguished. The mitoribosomal protein Var1 (uS3m) undergoes a stress-induced transition from a soluble, chaperone-stabilized protein that is prevalent under benign conditions to an insoluble, aggregated form upon acute stress. The formation of Var1 bodies stabilizes mitochondrial proteostasis, presumably by sequestration of aggregation-prone proteins. The AAA chaperone Hsp78 is part of a second type of intramitochondrial aggregate that transiently sequesters proteins and promotes their folding or Pim1-mediated degradation. Thus, mitochondrial proteins actively control the formation of distinct types of intramitochondrial protein aggregates, which cooperate to stabilize the mitochondrial proteome during proteotoxic stress conditions.

In-vitro antimicrobial activity of AF-DP protein and in-silico approach of cell membrane disruption

Microbial resistance against common antibiotics has become one of the most serious threats to human health. The increasing statistics on this problem show the necessity of finding a way to deal with it. In recent years, antimicrobial peptides with unique properties and the capability of targeting a wide range of pathogens, have been considered as a potential for replacing common antibiotics. A small chitin-binding protein with anticandidal activity was isolated from Moringa oleifera seeds by Neto and colleagues in 2017, which very much resembled antimicrobial peptides. In this study, the antimicrobial protein 'AF-DP' was identified and characterized. AF-DP was heterologously expressed, purified, and characterized, and its 3D structure was predicted. Six molecular dynamic simulations were performed to investigate how the protein interacts with Gram-negative inner and outer, Gram-positive, fungal, cancerous, and normal mammalian membranes. Also, its antimicrobial and anticancer activity was assessed in vitro via minimum inhibition concentration (MIC) and MTT assays, respectively. This protein with 111 amino acids and a total net charge (of 10.5) has been predicted to be mainly composed of alpha helix and random coils. Its MIC affecting the growth of Escherichia coli, Staphylococcus aureus, and Candida albicans was 30 µg/ml, 100 µg/ml, and 100 µg/ml, respectively; AF-DP showed anticancer activity against MCF-7 breast cancer cell line. Scanning electron microscopic analysis confirmed the creation of pores and scratches on the surface of the bacterial membrane. The results of this research show that AF-DP can be a candidate for the production of new drugs as an AMP with antimicrobial activity.Communicated by Ramaswamy H. Sarma.

Glycylglycine promotes the solubility and antigenic utility of recombinant HCV structural proteins in a point-of-care immunoassay for detection of active viremia

BACKGROUND

Although E. coli is generally a well-opted platform for the overproduction of recombinant antigens as heterologous proteins, the optimization of expression conditions to maximize the yield of functional proteins remains empirical. Herein, we developed an optimized E. coli (BL21)-based system for the overproduction of soluble immunoreactive HCV core/envelope proteins that were utilized to establish a novel immunoassay for discrimination of active HCV infection.

METHODS

The core/E1-E2 genes were amplified and expressed in E. coli BL21 (DE3) in the absence/presence of glycylglycine. The antigenic performance of soluble proteins was assessed against 63 HCV-seronegative (Ab-) sera that included normal and interferent sera (HBV and/or chronic renal failure), and 383 HCV-seropositive (Ab+) samples that included viremic (chronic/relapsers) and recovered patients' sera. The color intensity (OD450) and S/Co values were estimated.

RESULTS

The integration of 0.1-0.4M glycylglycine in the growth media significantly enhanced the solubility/yield of recombinant core and envelope proteins by ~ 225 and 242 fold, respectively. This was reflected in their immunoreactivity and antigenic performance in the developed immunoassay, where the soluble core/E1/E2 antigen mixture showed 100% accuracy in identifying HCV viremic sera with a viral RNA load as low as 3800 IU/mL, without cross-reactivity against normal/interferent HCV-Ab-sera. The ideal S/Co threshold predicting active viremia (> 2.75) showed an AUC value of 0.9362 (95% CI: 0.9132 to 0.9593), with 87.64, 91.23% sensitivity and specificity, and 94.14, 82.11% positive and negative predictive values, respectively. The different panels of samples assayed with our EIA showed a good concordance with the viral loads and also significant correlations with the golden standards of HCV diagnosis in viremic patients. The performance of the EIA was not affected by the immunocompromised conditions or HBV co-infection.

CONCLUSION

The applicability of the proposed platform would extend beyond the reported approach, where glycylglycine, low inducer concentration and post-induction temperature, combined with the moderately-strong constitutive promoter enables the stable production of soluble/active proteins, even those with reported toxicity. Also, the newly developed immunoassay provides a cost-effective point-of-care diagnostic tool for active HCV viremia that could be useful in resource-limited settings.

Cloning, sequencing, expression, and purification of aspartic proteases isolated from two human Demodex species

Aspartic proteases (ASPs) are important hydrolases for parasitic invasion of host tissues or cells. This was the first study on Demodex ASP. First, the complete coding sequence (CDS) was amplified, cloned and sequenced. Then, the protein physical and chemical properties was analysed. Finally, the recombinant plasmid, expression and purification system was established. Results showed that the lengths of CDS of Demodex folliculorum and D. brevis were 1161 and 1173 bp, respectively. The molecular weight of the protein was approximately 40 KDa. It contained an aspartic acid residue, a substrate-binding site and signal peptide, yet lacked a transmembrane domain and was located in the membrane or extracellular matrix. The phylogenetic and conserved motif analyses showed that D. folliculorum and D. brevis clustered separately and then formed a single branch, which finally clustered with other Acariformes species. The prokaryotic expression systems for recombinant ASP with His-tag (rASP-His) and GST-tag (rASP-GST) were constructed. The inclusion bodies of rASP-His were renaturated by gradient urea and purified using NI beads, while those of rASP-GST were renaturated by sarkosyl and Triton X-100 and purified using GST beads. Conclusively, the prokaryotic expression and purification system of Demodex rASP was successfully established for further pathogenic mechanism research.

Refinement of the Fusion Tag PagP for Effective Formation of Inclusion Bodies in Escherichia coli

Methods for efficient insoluble protein production require further exploration. PagP, an Escherichia coli outer membrane protein with high β-sheet content, could function as an efficient fusion partner for inclusion body-targeted expression of recombinant peptides. The primary structure of a given polypeptide determines to a large extent its propensity to aggregate. Herein, aggregation "hot spots" (HSs) in PagP were analyzed using the web-based software AGGRESCAN, leading to identification of a C-terminal region harboring numerous HSs. Moreover, a proline-rich region was found in the β-strands. Substitution of these prolines by residues with high β-sheet propensity and hydrophobicity significantly improved its ability to form aggregates. Consequently, the absolute yields of recombinant antimicrobial peptides Magainin II, Metchnikowin, and Andropin were increased significantly when expressed in fusion with this refined version of PagP. We describe separation of recombinant target proteins expressed in inclusion bodies fused with the tag. An artificial NHT linker peptide with three motifs was implemented for separation and purification of authentic recombinant antimicrobial peptides. IMPORTANCE Fusion tag-induced formation of inclusion bodies provides a powerful means to express unstructured or toxic proteins. For a given fusion tag, how to enhance the formation of inclusion bodies remains to be explored. Our study illustrated that the aggregation HSs in a fusion tag played important roles in mediating its insoluble expression. Efficient production of inclusion bodies could also be implemented by refining its primary structure to form a more stable β-sheet with higher hydrophobicity. This study provides a promising method for improvement of the insoluble expression of recombinant proteins.

Folding of heterologous proteins in bacterial cell factories: Cellular mechanisms and engineering strategies

The expression of correctly folded and functional heterologous proteins is important in many biotechnological production processes, whether it is enzymes, biopharmaceuticals or biosynthetic pathways for production of sustainable chemicals. For industrial applications, bacterial platform organisms, such as E. coli, are still broadly used due to the availability of tools and proven suitability at industrial scale. However, expression of heterologous proteins in these organisms can result in protein aggregation and low amounts of functional protein. This review provides an overview of the cellular mechanisms that can influence protein folding and expression, such as co-translational folding and assembly, chaperone binding, as well as protein quality control, across different model organisms. The knowledge of these mechanisms is then linked to different experimental methods that have been applied in order to improve functional heterologous protein folding, such as codon optimization, fusion tagging, chaperone co-production, as well as strain and protein engineering strategies.

High-Throughput Expression of Inclusion Bodies on an Automated Platform

In bioprocesses, which target the production of recombinant proteins as inclusion bodies, the upstream process has a decisive influence on the downstream operations, especially regarding cell disruption, inclusion body purity and composition, and refolding yield. Therefore, optimization of the processes in fed-batch mode is a major issue, and screening for strains and process conditions are performed in highly labor, time and cost intensive shake flasks or multiwell plates. Thus, high-throughput experiments performed similar to the industrial operating conditions offer a possibility to develop efficient and robust upstream processes. We present here an automated platform for Escherichia coli fed-batch cultivations in parallelized minibioreactors. The platform allows execution of experiments under multiple conditions while allowing for real-time monitoring of critical process parameters and a controlled fermentation environment. By this, the main factors that affect yields and quality of inclusion bodies can be investigated, speeding up the development process significantly.

Y12F mutation in Pseudomonas plecoglossicida S7 lipase enhances its thermal and pH stability for industrial applications: a combination of in silico and in vitro study

Appropriate amino acid substitutions are critical for protein engineering to redesign catalytic properties of industrially important enzymes like lipases. The present study aimed for improving the environmental stability of lipase from Pseudomonas plecoglossicida S7 through site-directed mutagenesis driven by computational studies. lipA gene was amplified and sequenced. Both wild type (WT) and mutant type (MT) lipase genes were expressed into the pET SUMO system. The expressed proteins were purified and characterized for pH and thermostability. The lipase gene belonged to subfamily I.1 lipase. Molecular dynamics revealed that Y12F-palmitic acid complex had a greater binding affinity (-6.3 Kcal/mol) than WT (-6.0 Kcal/mol) complex. Interestingly, MDS showed that the binding affinity of WT-complex (-130.314 ± 15.11 KJ/mol) was more than mutant complex (-108.405 ± 69.376 KJ/mol) with a marked increase in the electrostatic energy of mutant (-26.969 ± 12.646 KJ/mol) as compared to WT (-15.082 ± 13.802 KJ/mol). Y12F mutant yielded 1.27 folds increase in lipase activity at 55 °C as compared to the purified WT protein. Also, Y12F mutant showed increased activity (~ 1.2 folds each) at both pH 6 and 10. P. plecoglossicida S7. Y12F mutation altered the kinetic parameters of MT (K_m- 1.38 mM, V_max- 22.32 µM/min) as compared to WT (K_m- 1.52 mM, V_max- 29.76 µM/min) thus increasing the binding affinity of mutant lipase. Y12F mutant lipase with better pH and thermal stability can be used in biocatalysis.

Laboratory Scale Production of Complex Proteins Using Charge Complimentary Nanoenvironments

Protein refolding is a crucial procedure in bacterial recombinant expression. Aggregation and misfolding are the two challenges that can affect the overall yield and specific activity of the folded proteins. We demonstrated the in vitro use of nanoscale "thermostable exoshells" (tES) to encapsulate, fold and release diverse protein substrates. With tES, the soluble yield, functional yield, and specific activity increased from 2-fold to >100-fold when compared to folding in its absence. On average, the soluble yield was determined to be 6.5 mg/100 mg of tES for a set of 12 diverse substrates evaluated. The electrostatic charge complementation between the tES interior and the protein substrate was considered as the primary determinant for functional folding. We thus describe a useful and simple method for in vitro folding that has been evaluated and implemented in our laboratory.

Inclusion Bodies: Status Quo and Perspectives

Multiple E. coli cultivations, producing recombinant proteins, lead to the formation of inclusion bodies (IBs). IBs historically were considered as nondesired by-products, due to their time- and cost-intensive purification. Nowadays, many obstacles in IB processing can be overcome. As a consequence, several industrial processes with E. coli favor IB formation over soluble production options due to the high space time yields obtained. Within this chapter, we discuss the state-of-the art biopharmaceutical IB process, review its challenges, highlight the recent developments and perspectives, and also propose alternative solutions, compared to the state-of-the art processing.

Quality comparison of recombinant soluble proteins and proteins solubilized from bacterial inclusion bodies

Recombinant protein production in bacteria is often accompanied by the formation of aggregates, known as inclusion bodies (IBs). Although several strategies have been developed to minimize protein aggregation, many heterologous proteins are produced in aggregated form. For these proteins, purification necessarily requires processes of solubilization and refolding, often involving denaturing agents. However, the presence of biologically active recombinant proteins forming IBs has driven a redefinition of the protocols used to obtain soluble protein avoiding the protein denaturation step. Among the different strategies described, the detergent n-lauroylsarcosine (NLS) has proved to be effective. However, the impact of the NLS on final protein quality has not been evaluated so far. Here, the activity of three antimicrobial proteins (all as GFP fusions) obtained from the soluble fraction was compared with those solubilized from IBs. Results showed that NLS solubilized proteins from IBs efficiently, but that protein activity was impaired. Thus, a solubilization protocol without detergents was evaluated, demonstrating that this strategy efficiently solubilized proteins embedded in IBs while retaining their biological activity. These results showed that the protocol used for IB solubilization has an impact on final protein quality and that IBs can be solubilized through a very simple step, obtaining fully active proteins.

Cold-Active Lipases and Esterases: A Review on Recombinant Overexpression and Other Essential Issues

Cold environments characterised by diverse temperatures close to or below the water freezing point dominate about 80% of the Earth's biosphere. One of the survival strategies adopted by microorganisms living in cold environments is their expression of cold-active enzymes that enable them to perform an efficient metabolic flux at low temperatures necessary to thrive and reproduce under those constraints. Cold-active enzymes are ideal biocatalysts that can reduce the need for heating procedures and improve industrial processes' quality, sustainability, and cost-effectiveness. Despite their wide applications, their industrial usage is still limited, and the major contributing factor is the lack of complete understanding of their structure and cold adaptation mechanisms. The current review looked at the recombinant overexpression, purification, and recent mechanism of cold adaptation, various approaches for purification, and three-dimensional (3D) crystal structure elucidation of cold-active lipases and esterase.

Plasmids for Controlled and Tunable High-Level Expression in E. coli

Genetic systems for protein overexpression are required tools in microbiological and biochemical research. Ideally, these systems include standardized genetic parts with predictable behavior, enabling the construction of stable expression systems in the host organism.

Engineering sigma factors and chaperones for enhanced heterologous lipoxygenase production in Escherichia coli

BACKGROUND

Lipoxygenase (EC. 1.13.11.12, LOX) can catalyze the addition of oxygen into polyunsaturated fatty acids to produce hydroperoxides, which are widely used in the food, chemical, and pharmaceutical industries. In recent years, the heterologous production of LOX by Escherichia coli has attracted extensive attention. However, overexpressed recombinant LOX in E. coli aggregates and forms insoluble inclusion bodies owing to protein misfolding.

RESULTS

In this study, a split green fluorescent protein-based screening method was developed to screen sigma (σ) factors and molecular chaperones for soluble LOX expression. Three mutant libraries of Skp, GroES, and RpoH was analyzed using the high-throughput screening method developed herein, and a series of mutants with significantly higher yield of soluble heterologous LOX were obtained. The soluble expression level of LOX in the isolated mutants increased by 4.2- to 5.3-fold. Further, the highest LOX activity (up to 6240 ± 269 U·g-DCW^-1) was observed in E. coli REopt, with the regulatory factor mutants, RpoH and GroES. Based on RNA-Seq analysis of the selected strains, E. coli Eopt, E. coli Sopt, E. coli Ropt, and wild type, amino acid substitutions in σ factors and molecular chaperones regulated the expression level of genes related to gene replication, recombination, and repair. Furthermore, the regulatory factor mutants were identified to be beneficial to the soluble expression of two other heterologous proteins, amylase and bone morphological protein 12.

CONCLUSION

In this study, a high-throughput screening method was developed for improved soluble LOX expression. The obtained positive mutants of the regulatory factor were analyzed and employed for the expression of other heterologous proteins, thus providing a potential solution for the inclusion-body protein.

Quenched hydrogen-deuterium amide exchange optimization for high-resolution structural analysis of cellular protein aggregates

Inclusion bodies (IBs) are large, insoluble aggregates that often form during the overexpression of proteins in bacteria. These aggregates are of broad fundamental and practical significance, for recombinant protein preparation and due to their relevance to aggregation-related medical conditions and their recent emergence as promising functional nanomaterials. Despite their significance, high resolution knowledge of IB structure remains very limited. Such knowledge will advance understanding and control of IB formation and properties in myriad practical applications. Here, we report a detailed quenched hydrogen-deuterium amide exchange (qHDX) method with NMR readout to define the structure of IBs at the level of individual residues throughout the protein. Applying proper control of experimental conditions, such as sample pH, water content, temperature, and intrinsic rate of amide exchange, yields in depth results for these cellular protein aggregates. qHDX results illustrated for Cu, Zn superoxide dismutase 1 (SOD1) and Adnectins show their IBs include native-like structure and some but not all mutations alter IB structure.

Fundamental insights in early-stage inclusion body formation

Early-stage inclusion body formation is still mysterious. Literature is ambiguous about the existence of rod-shaped protein aggregates, a potential sponge-like inclusion body scaffold as well as the number of inclusion bodies per Escherichia coli cell. In this study, we verified the existence of rod-shaped inclusion bodies, confirmed their porous morphology, the presence of multiple protein aggregates per cell and modelled inclusion body formation as function of the number of generations.

Nipah Virus Infection Generates Ordered Structures in Cellulo

Nipah virus (NiV) is a zoonotic paramyxovirus with a fatality rate of up to 92% in humans. While several pathogenic mechanisms used by NiV to counteract host immune defense responses have been described, all of the processes that take place in cells during infection are not fully characterized. Here, we describe the formation of ordered intracellular structures during NiV infection. We observed that these structures are formed specifically during NiV infection, but not with other viruses from the same Mononegavirales order (namely Ebola virus) or from other orders such as Bunyavirales (Junín virus). We also determined the kinetics of the appearance of these structures and their cellular localization at the cellular periphery. Finally, we confirmed the presence of these NiV-specific ordered structures using structured illumination microscopy (SIM), as well as their localization by transmission electron microscopy (TEM), scanning electron microscopy (SEM), and correlative light and electron microscopy (CLEM). Herein, we describe a cytopathogenic mechanism that provides a new insight into NiV biology. These newly described ordered structures could provide a target for novel antiviral approaches.

Complex Inclusion Bodies and Defective Proteome Hubs in Neurodegenerative Disease: New Clues, New Challenges

A healthy physiological environment of cells represents the dynamic homeostasis of crowded molecules. A subset of cellular proteome forms protein quality control (PQC) machinery to maintain an uninterrupted synthesis of new polypeptides and targeted elimination of old or defective proteins. The process of PQC may get overwhelmed under specific genetic mutations, environmental stress conditions, and aging-associated perturbances. Many of these conditions may lead to the generation of various types of aberrant protein species that may or may not accumulate as large cellular inclusions. These proteinaceous formations, referred to as inclusion bodies (IBs), could be membrane-bound or membrane-less, cytoplasmic, or nuclear. Most importantly, they could either be toxic or protective. Under acute stress conditions, the formation of aggregates may cause proteostasis failure, leading to large-scale changes in the cellular proteome compositions. However, the large insoluble IBs may act as reservoirs for many soluble proteins with high aggregation propensities, which can overwhelm the cellular chaperoning capacity and protein degradation machinery. The kinetic equilibrium between folding and unfolding, misfolding, and refolding; aggregation and degradation is perturbed in one or many neurodegenerative disorders (NDDs) associated with dementia, cognitive impairments, movement, and behavioural losses. However, a detailed interplay of IBs into the manifestation of the NDDs is unknown, and a very primitive knowledge of structural compositions of amyloid inclusions is present. The present article presents a brief evolutionary background of IBs; their functional relevance for prokaryotes, plants, and animals; and associated involvement in neuronal proteostasis.

Catalytically Active Inclusion Bodies─Benchmarking and Application in Flow Chemistry

In industries, enzymes are often immobilized to obtain stable preparations that can be utilized in batch and flow processes. In contrast to traditional immobilization methods that rely on carrier binding, various immobilization strategies have been recently presented that enable the simultaneous production and in vivo immobilization of enzymes. Catalytically active inclusion bodies (CatIBs) are a promising example for such in vivo enzyme immobilizates. CatIB formation is commonly induced by fusion of aggregation-inducing tags, and numerous tags, ranging from small synthetic peptides to protein domains or whole proteins, have been successfully used. However, since these systems have been characterized by different groups employing different methods, a direct comparison remains difficult, which prompted us to benchmark different CatIB-formation-inducing tags and fusion strategies. Our study highlights that important CatIB properties like yield, activity, and stability are strongly influenced by tag selection and fusion strategy. Optimization enabled us to obtain alcohol dehydrogenase CatIBs with superior activity and stability, which were subsequently applied for the first time in a flow synthesis approach. Our study highlights the potential of CatIB-based immobilizates, while at the same time demonstrating the robust use of CatIBs in flow chemistry.

Solubilization and Refolding of Inclusion Body Proteins

Expression of heterologous proteins in E. coli often leads to the formation of protein aggregates known as inclusion bodies (IBs). Inclusion body aggregates pose a major hurdle in the recovery of bioactive proteins from E. coli. Usage of strong denaturing buffers for solubilization of bacterial IBs results in poor recovery of bioactive protein. Structure-function understanding of IBs in the last two decades have led to the development of several mild solubilization buffers, which improve the recovery of bioactive from IBs. Recently, combinatorial mild solubilization methods have paved the way for solubilization of wide range of inclusion bodies with appreciable refolding yield. Here, we describe a simple protocol for solubilization and refolding of an inclusion body protein with appreciable recovery.

Regulation by Different Types of Chaperones of Amyloid Transformation of Proteins Involved in the Development of Neurodegenerative Diseases

The review highlights various aspects of the influence of chaperones on amyloid proteins associated with the development of neurodegenerative diseases and includes studies conducted in our laboratory. Different sections of the article are devoted to the role of chaperones in the pathological transformation of alpha-synuclein and the prion protein. Information about the interaction of the chaperonins GroE and TRiC as well as polymer-based artificial chaperones with amyloidogenic proteins is summarized. Particular attention is paid to the effect of blocking chaperones by misfolded and amyloidogenic proteins. It was noted that the accumulation of functionally inactive chaperones blocked by misfolded proteins might cause the formation of amyloid aggregates and prevent the disassembly of fibrillar structures. Moreover, the blocking of chaperones by various forms of amyloid proteins might lead to pathological changes in the vital activity of cells due to the impaired folding of newly synthesized proteins and their subsequent processing. The final section of the article discusses both the little data on the role of gut microbiota in the propagation of synucleinopathies and prion diseases and the possible involvement of the bacterial chaperone GroE in these processes.

Is Protein Folding a Thermodynamically Unfavorable, Active, Energy-Dependent Process?

The prevailing current view of protein folding is the thermodynamic hypothesis, under which the native folded conformation of a protein corresponds to the global minimum of Gibbs free energy G. We question this concept and show that the empirical evidence behind the thermodynamic hypothesis of folding is far from strong. Furthermore, physical theory-based approaches to the prediction of protein folds and their folding pathways so far have invariably failed except for some very small proteins, despite decades of intensive theory development and the enormous increase of computer power. The recent spectacular successes in protein structure prediction owe to evolutionary modeling of amino acid sequence substitutions enhanced by deep learning methods, but even these breakthroughs provide no information on the protein folding mechanisms and pathways. We discuss an alternative view of protein folding, under which the native state of most proteins does not occupy the global free energy minimum, but rather, a local minimum on a fluctuating free energy landscape. We further argue that ΔG of folding is likely to be positive for the majority of proteins, which therefore fold into their native conformations only through interactions with the energy-dependent molecular machinery of living cells, in particular, the translation system and chaperones. Accordingly, protein folding should be modeled as it occurs in vivo, that is, as a non-equilibrium, active, energy-dependent process.

Intrinsically Disordered Proteins (IDP): Purification Under Denaturing Conditions

Recombinant protein expression in E. coli often induces the expressed protein to accumulate in insoluble aggregates, named inclusion bodies (IBs), that represent easy to isolate, highly pure protein reservoirs. IBs can be solubilized by denaturing agents but this procedure requires, for complex globular proteins, a refolding step that can be challenging. However, the lack of cooperatively folded tertiary structure in intrinsically disordered proteins (IDP) makes them ideal candidates for this purification strategy. Given the wide abundance of IDPs, their relevance in many disease areas and the numerous IDP-associated biological functions, the interest in this class of proteins has increased substantially over the last decade. Here we present a broad and versatile method for the production and isolation of IDPs from inclusion bodies under denaturant conditions that overcomes the challenges associated with the propensity of these sequences to precipitate from solution and becoming proteolytically degraded.

Solubilization and refolding of variety of inclusion body proteins using a novel formulation

Formation of protein aggregates as inclusion bodies (IBs) still poses a major hurdle in the recovery of bioactive proteins from E. coli. Despite the development of many mild solubilization buffers in last two decades, high-throughput recovery of functional protein from wide range of IBs is still a challenge at an academic and industrial scale. Herein, a novel formulation for improved recovery of bioactive protein from variety of bacterial IBs is developed. This novel formulation is comprised of 20% trifluoroethanol, 20% n-propanol and 2 M urea at pH 12.5 which disrupts the major dominant forces involved in protein aggregation. An extensive comparative study of novel formulation conducted on different IBs demonstrates its high solubilization and refolding efficiency. The overall yield of bioactive protein from human growth hormone expressed as bacterial IBs is reported to be around 50%. This is attributed to the capability of novel formulation to disrupt the tertiary structure of the protein while protecting the secondary structure of the protein, thereby reducing the formation of soluble aggregates during refolding. Thus, the formulation can eliminate the need of screening and optimizing various solubilization formulation and will improve the efficiency of recovering bioactive protein from variety of IB aggregates.

Intranasal vaccination with protein bodies elicit strong protection against Streptococcus pneumoniae colonization

Protein bodies (PBs) are particles consisting of insoluble, aggregated proteins with potential as a vaccine formulation. PBs can contain high concentrations of antigen, are stable and relatively resistant to proteases, release antigen slowly and are cost-effective to manufacture. Yet, the capacity of PBs to provoke immune responses and protection in the upper respiratory tract, a major entry route of respiratory pathogens, is largely unknown. In this study, we vaccinated mice intranasally with PBs comprising antigens from Streptococcus pneumoniae and evaluated the level of protection against nasopharyngeal colonization. PBs composed of the α-helical domain of pneumococcal surface protein A (PspAα) provided superior protection against colonization with S. pneumoniae compared to soluble PspAα. Immunization with soluble protein or PBs induced differences in antibody binding to pneumococci as well as a highly distinct antigen-specific nasal cytokine profile upon in vivo stimulation with inactivated S. pneumoniae. Moreover, immunization with PBs composed of conserved putative pneumococcal antigens reduced colonization by S. pneumoniae in mice, both as a single- and as a multi-antigen formulation. In conclusion, PBs represent a vaccine formulation that elicits strong mucosal immune responses and protection. The versatility of this platform offers opportunities for development of next-generation vaccine formulations.

Cytotopic (Cyto-) IL-15 as a New Immunotherapy for Prostate Cancer: Recombinant Production in Escherichia coli and Purification

Interleukin-15 (IL-15) is a cytokine previously suggested as a potential immunotherapy for cancer treatment. IL-15 can effectively reduce tumor growth in many preclinical tumor models including prostate cancer. This is due to its ability to expand and activate immune cells, such as CD8⁺ T cells and natural killer cells. To increase the potency of IL-15, we have engineered a protein variant that can be modified to localize and be retained in tissues where it is administered. However, the production of recombinant IL-15, the purity, and correct refolding of the final protein is not always ideal. In the current study, we aimed to optimize the methodology for production and purification of a modified recombinant human IL-15 and investigate the efficacy of the produced protein in the treatment of prostate tumors. Human IL-15 with its polypeptide sequence modified at the C-terminus to enable thiol conjugation with membrane localizing peptides, was produced in E. coli and purified using mild denaturing conditions (2M urea) from a washing step or from solubilization of inclusion bodies. The purified protein from the wash fraction was conjugated to a myristoylated peptide to form a membrane-localizing IL-15 (cyto-IL-15). The efficacy of cyto-IL-15 was investigated in subcutaneous TRAMP-C2 prostate tumors in mice and compared with cyto-IL-15 derived from protein purified from inclusion bodies (cyto-IL-15 Gen). When mild denaturing conditions were used for purification, the largest amount of IL-15 was collected from the wash fraction and a smaller amount from inclusion bodies. The protein from the wash fraction was mainly present as a monomer, whereas the one from inclusion bodies formed homodimers and higher complexes. After cytotopic modification, the purified IL-showed great efficacy in delaying prostate tumor growth (∼50%) and increased mice survival by ∼1.8-fold compared with vehicle. This study demonstrates an alternative, inexpensive and efficient method to produce and purify a modified version of IL-15 using mild denaturing conditions. This IL-15, when cytotopically modified, showed great efficacy as a monotherapy in prostate tumors in mice further highlighting the potential of IL-15 as a cancer immunotherapy.

Molecular cloning, heterologous expression, and in silico sequence analysis of Enterobacter GH19 class I chitinase (chiRAM gene)

BACKGROUND

Using in silico sequence analyses, the present study aims to clone and express the gene-encoding sequence of a GH19 chitinase from Enterobacter sp. in Escherichia coli.

METHODS AND RESULTS

The putative open reading frame of a GH19 chitinase from Enterobacter sp. strain EGY1 was cloned and expressed into pGEM®-T and pET-28a (+) vectors, respectively using a degenerate primer. The isolated nucleotide sequence (1821 bp, GenBank accession no.: MK533791.2) was translated to a chiRAM protein (606 amino acids, UniProt accession no.: A0A4D6J2L9). The in silico protein sequence analysis of chiRAM revealed a class I GH19 chitinase: an N-terminus signal peptide (Met¹-Ala²³), a catalytic domain (Val⁸³-Glu³⁴⁷ and the catalytic triad Glu¹⁴⁹, Glu¹⁷¹, and Ser²¹⁸), a proline-rich hinge region (Pro⁴¹⁴ -Pro⁴⁵⁰), a polycystic kidney disease protein motif (Gly ⁴⁶⁵-Ser ⁵³³), a C-terminus chitin-binding domain (Ala⁵⁵³- Glu⁵⁹³), and conserved class I motifs (NYNY and AQETGG). A three-dimensional model was constructed by LOMETS MODELLER of PDB template: 2dkvA (class I chitinase of Oryza sativa L. japonica). Recombinant chiRAM was overexpressed as inclusion bodies (IBs) (~ 72 kDa; SDS-PAGE) in 1.0 mM IPTG induced E. coli BL21 (DE3) Rosetta strain at room temperature 18 h after induction. Optimized expression yielded active chiRAM with 1.974 ± 0.0002 U/mL, on shrimp colloidal chitin (SCC), in induced E. coli BL21 (DE3) Rosetta cells growing in SB medium. LC-MS/MS identified a band of 72 kDa in the soluble fraction with a 52.3% coverage sequence exclusive to the GH19 chitinase of Enterobacter cloacae (WP_063869339.1).

CONCLUSIONS

Although chiRAM of Enterobacter sp. was successfully cloned and expressed in E. coli with appreciable chitinase activity, future studies should focus on minimizing IBs to facilitate chiRAM purification and characterization.

Identification of methionine adenosyltransferase with high diastereoselectivity for biocatalytic synthesis of (S)-S-adenosyl-l-methionine and exploring its relationship with fluorinated biosynthetic pathway

Natural fluorinated products are rare and attract great attention. The de novo fluorometabolites biosynthetic pathway in microbes has been studied. It is revealed that the carbon-fluorine (C-F) bond is formed by an exotic enzyme called fluorinase (FLA) when using fluorine ions and S-adenosyl-l-methionine (SAM) as substrates. However, the resource of the precursor SAM is still elusive. To solve this, a novel methionine adenosyltransferase from Streptomyces xinghaiensis (SxMAT) was identified and characterized. We proved that SAM was enzymatically synthesized by SxMAT, an enzyme that mediated the reaction between adenosine triphosphate (ATP) and l-methionine (l-Met) with 99% diastereoisomeric excess (d.e.) and 80% yield. Such high diastereoselectivity had never been reported before. SxMAT was a Co²⁺-dependent metalloenzyme. The results showed that the metal cobalt ion contributes to the activity and selectivity of SxMAT. Molecular docking was performed to reveal its catalytic mechanism. The optimal temperature and pH were 55 °C and 8.5, respectively. Lastly, a two-step tandem enzymatic reaction using SxMAT and FLA both from S. xinghaiensis to generate 5'-fluoro-deoxyadenosine (5'-FDA) was performed. This implied that SxMAT may be present in this fluorometabolites biosynthetic route. These results suggested that SxMAT could be a useful biocatalyst for the synthesis of optically pure (S)-S-adenosyl-l-methionine, an important nutraceutical. In addition, SxMAT will probably play an important role in the biosynthetic pathway of fluorinated natural products in bacteria.

Optimizing the Expression and Solubilization of an E. coli-Produced Leukemia Inhibitory Factor for Anti-LIF Antibody Production and Use Thereof for Contraception in Mice

Leukemia inhibitory factor (LIF) is an essential cytokine for blastocyst implantation. This study evaluated the effect of LIF inhibition on the blockage of embryo implantation. A truncated mouse LIF (tmLIF) was designed and expressed in E. coli. The protein expression was optimized using different culture media and inducers. To block pregnancy, the mice were immunized by the purified protein via maternal injection of the protein or in utero injection of the anti-LIF serum. The expression of implantation-relevant genes was quantified in the uterine tissue. The results showed that the protein was expressed in aggregated form in E. coli. The highest yield of protein was produced in the M9 medium. The insoluble protein was completely dissociated by SDS and 2-ME combination, but not by urea. The maternal immunization reduced the number of offspring, but not significantly. Instead, in utero injection of the anti-LIF serum prevented the blastocyst implantation. Gene expression analyses showed decrease of Jam2, Msx1and HB-EGF genes and increase of Muc1 gene as the result of intrauterine administration of the anti-LIF serums. In conclusion, SDS-mediated solubilization of inclusion bodies was compatible with in vivo studies. The intrauterine administration of anti-LIF serum could prevent mouse pregnancy. This indicates that in utero application of LIF antibodies might be used as a contraceptive.

How Hierarchical Interactions Make Membraneless Organelles Tick Like Clockwork

Biomolecular condensates appear throughout the cell, serving many different biochemical functions. We argue that condensate functionality is optimized when the interactions driving condensation vary widely in affinity. Strong interactions provide structural specificity needed to encode functional properties but carry the risk of kinetic arrest, while weak interactions allow the system to remain dynamic but do not restrict the conformational ensemble enough to sustain specific functional features. To support our opinion, we describe illustrative examples of the interplay of strong and weak interactions that are found in the nucleolus, SPOP/DAXX condensates, polySUMO/polySIM condensates, chromatin, and stress granules. The common feature of these systems is a hierarchical assembly motif in which weak, transient interactions condense structurally defined functional units.

Systemic Expression, Purification, and Initial Structural Characterization of Bacteriophage T4 Proteins Without Known Structure Homologs

Bacteriophage T4 of Escherichia coli is one of the most studied phages. Research into it has led to numerous contributions to phage biology and biochemistry. Coding about 300 gene products, this double-stranded DNA virus is the best-understood model in phage study and modern genomics and proteomics. Ranging from viral RNA polymerase, commonly found in phages, to thymidylate synthase, whose mRNA requires eukaryotic-like self-splicing, its gene products provide a pool of fine examples for phage research. However, there are still up to 130 gene products that remain poorly characterized despite being one of the most-studied model phages. With the recent advancement of cryo-electron microscopy, we have a glimpse of the virion and the structural proteins that present in the final assembly. Unfortunately, proteins participating in other stages of phage development are absent. Here, we report our systemic analysis on 22 of these structurally uncharacterized proteins, of which none has a known homologous structure due to the low sequence homology to published structures and does not belong to the category of viral structural protein. Using NMR spectroscopy and cryo-EM, we provided a set of preliminary structural information for some of these proteins including NMR backbone assignment for Cef. Our findings pave the way for structural determination for the phage proteins, whose sequences are mainly conserved among phages. While this work provides the foundation for structural determinations of proteins like Gp57B, Cef, Y04L, and Mrh, other in vitro studies would also benefit from the high yield expression of these proteins.

Study on the activity of recombinant mutant tissue-type plasminogen activator fused with the C-terminal fragment of hirudin

In the present study, bifunctional fusion proteins were designed by fusing the kringle 2 and protease domains of tissue-type plasminogen activator (tPA) to the C-terminal fragment of hirudin. The thrombolytic and anticoagulant activities of these recombinant proteins from mammalian cells were investigated using in vitro coagulation models and chromogenic assays. The results showed that all assayed tPA mutants retained catalytic activity. The C-terminal fragment of hirudin may have weak affinity to thrombin and thus was insufficient to suppress thrombin-mediated fibrin agglutination. The strength of the thrombolytic activity only relied on the selected tPA sequences, and the fibrinolytic efficiency of single-chain protein significantly decreased. Our data indicate that truncated tPA combined with a hirudin peptide may provide a framework for the further development of a new antithrombotic agent.

Challenges Associated With the Formation of Recombinant Protein Inclusion Bodies in Escherichia coli and Strategies to Address Them for Industrial Applications

Recombinant proteins are becoming increasingly important for industrial applications, where Escherichia coli is the most widely used bacterial host for their production. However, the formation of inclusion bodies is a frequently encountered challenge for producing soluble and functional recombinant proteins. To overcome this hurdle, different strategies have been developed through adjusting growth conditions, engineering host strains of E. coli, altering expression vectors, and modifying the proteins of interest. These approaches will be comprehensively highlighted with some of the new developments in this review. Additionally, the unique features of protein inclusion bodies, the mechanism and influencing factors of their formation, and their potential advantages will also be discussed.

The intrinsically disordered region of GCE protein adopts a more fixed structure by interacting with the LBD of the nuclear receptor FTZ-F1

The Drosophila melanogaster Germ cell-expressed protein (GCE) is a paralog of the juvenile hormone (JH) receptor - Methoprene tolerant protein (MET). Both proteins mediate JH function, preventing precocious differentiation during D. melanogaster development. Despite that GCE and MET are often referred to as equivalent JH receptors, their functions are not fully redundant and show tissue specificity. Both proteins belong to the family of bHLH-PAS transcription factors. The similarity of their primary structure is limited to defined bHLH and PAS domains, while their long C-terminal fragments (GCEC, METC) show significant differences and are expected to determine differences in GCE and MET protein activities. In this paper we present the structural characterization of GCEC as a coil-like intrinsically disordered protein (IDP) with highly elongated and asymmetric conformation. In comparison to previously characterized METC, GCEC is less compacted, contains more molecular recognition elements (MoREs) and exhibits a higher propensity for induced folding. The NMR shifts perturbation experiment and pull-down assay clearly demonstrated that the GCEC fragment is sufficient to form an interaction interface with the ligand binding domain (LBD) of the nuclear receptor Fushi Tarazu factor-1 (FTZ-F1). Significantly, these interactions can force GCEC to adopt more fixed structure that can modulate the activity, structure and functions of the full-length receptor. The discussed relation of protein functionality with the structural data of inherently disordered GCEC fragment is a novel look at this protein and contributes to a better understanding of the molecular basis of the functions of the C-terminal fragments of the bHLH-PAS family.

Fast Purification of Recombinant Monomeric Amyloid-β from E. coli and Amyloid-β-mCherry Aggregates from Mammalian Cells

The Alzheimer's disease related peptide, Amyloid-beta (Aβ)1-40 and 1-42, has proven difficult to be purified as a recombinant monomeric protein due its expression in E. coli leading to the formation of insoluble inclusion bodies and its tendency to quickly form insoluble aggregates. A vast array of methods have been used so far, yet many have pitfalls, such as the use of tags for ease of Aβ isolation, the formation of Aβ multimers within the time frame of extraction, or the need to reconstitute Aβ from a freeze-dried state. Here, we present a rapid protocol to produce highly pure and monomeric recombinant Aβ using a one-step ion exchange purification method and to label the peptide using a maleimide dye. The washing, solubilization, and purification steps take only 3 h. We also present a protocol for the isolation of Aβ-mCherry from mammalian cells.

Investigation of Supercharging as A Strategy to Enhance the Solubility and Plasminogen Cleavage Activity of Reteplase

Background

Reteplase, the recombinant form of tissue plasminogen activator, is a thrombolytic drug with outstanding characteristics, while demonstrating limited solubility and reduced plasminogen activation. Previously, we in silico designed a variant of Reteplase with positively supercharged surface, which showed promising stability, solubility and activity. This study was devoted to evaluation of the utility of supercharging technique for enhancing these characteristics in Reteplase.

Objective

To test the hypothesis that reinforced surface charge of a rationally-designed Reteplase variant will not compromise its stability, will increase its solubility, and will enhance its plasminogen cleavage activity.

Materials and Methods

Supercharged Reteplase coding sequence was cloned in pDest527 vector and expressed in E. coli BL21 (DE3). The expressed protein was extracted by cell disruption. Inclusion bodies were solubilized using guanidine hydrochloride, followed by dialysis for protein refolding. After confirmation with SDS-PAGE and western blotting, extracted proteins were assayed for solubility and tested for bioactivity.

Results

SDS-PAGE and western blot analysis confirmed the successful expression of Reteplase. Western blot experiments showed most of Reteplase expressed in the insoluble form. Plasminogen cleavage assay showed significantly higher activity of the supercharged variant than the wild type protein (P < 0.001). The stability of the supercharged variant was also comparable to the wild type.

Conclusion

Our findings, i.e. the contribution of the surface supercharging technique to retained stability, enhanced plasminogen cleavage activity, while inefficiently changed solubility of Reteplase, contain implications for future designs of soluble variants of this fibrinolytic protein drug.

Amyloid-like aggregation and fibril core determination of TDP-43 C-terminal domain

Cytoplasmic inclusion of TAR DNA-binding protein 43 (TDP-43) is a hallmark of most ALS (amyotrophic lateral sclerosis) and FTLD (Frontotemporal dementia), yet the aggregation of TDP-43 remains unclear. In this study, we proved the existence of amyloid-like structures of C-terminal domain of TDP-43 (TDP-C) in bacterial inclusion bodies (IBs), and obtained a homogenous fibril sample by seeding from the components of aggregated TDP-C in Escherichiacoli IBs. The results from solid-state NMR spectroscopy suggest that the homogenous fibrils were seeded from a tiny amount of aggregated TDP-C compositions in IBs; the structure characteristics of the rigid fibril core are identified of β-rich structures, and show subtle relativity with the hydrophobicity of residues. Our study here provides a further understanding of TDP-43 protein aggregation and fibrillation.

Structural investigation of APRs to improve the solubility of outer membrane protease (PgtE) from Salmonella enterica serotype typhi- A multi-constraint approach

Outer membrane proteins were playing a crucial role on the several functions controlled by cell membranes even though they are not naturally expressed at higher levels. In order to obtain biologically active protein, the denaturation of these inclusion bodies must be optimized using chaotropic agents. Hence, this study focuses on improving the yield of Outer Membrane Protease (PgtE) from Salmonella enterica serotype Typhi (S. Typhi) using chaotropes and additives. Denaturation methods were tried with various pH, detergents, and reducing agents were used to optimize the solubility of PgtE with biologically active form. Due to the aggregation, we failed to achieve the maximum yield of PgtE. Consequently, we predicted 9 Aggregation Prone Regions (APRs) in PgtE, which are mutated by known structural Gatekeepers. We calculated the Aggregation Index (AI) of PgtE with 10 mM of aspartic acid as an additive in optimized buffer. In addition, the mutations at specific positions within the protein structure can act as APRs suppressors without affecting protein stability with CABS flex dynamics. The multiple sequence analysis demonstrate that aspartic acid is appropriate denaturing additive for other Gram-negative pathogens of Omptin family.

Mutagenesis-Based Characterization and Improvement of a Novel Inclusion Body Tag

Whereas, bacterial inclusion bodies (IBs) for long were regarded as undesirable aggregates emerging during recombinant protein production, they currently receive attention as promising nanoparticulate biomaterials with diverse applications in biotechnology and biomedicine. We previously identified ssTorA, a signal sequence that normally directs protein export via the Tat pathway in E. coli, as a tag that induces the accumulation of fused proteins into IBs under overexpression conditions. Here, we used targeted mutagenesis to identify features and motifs being either critical or dispensable for IB formation. We found that IB formation is neither related to the function of ssTorA as a Tat-signal sequence nor is it a general feature of this family of signal sequences. IB formation was inhibited by co-overexpression of ssTorA binding chaperones TorD and DnaK and by amino acid substitutions that affect the propensity of ssTorA to form an α-helix. Systematic deletion experiments identified a minimal region of ssTorA required for IB formation in the center of the signal sequence. Unbiased genetic screening of a library of randomly mutagenized ssTorA sequences for reduced aggregation properties allowed us to pinpoint residues that are critical to sustain insoluble expression. Together, the data point to possible mechanisms for the aggregation of ssTorA fusions. Additionally, they led to the design of a tag with superior IB-formation properties compared to the original ssTorA sequence.

High pressure homogenization is a key unit operation in inclusion body processing

Recombinant protein production in E. coli often leads to the formation of inclusion bodies (IBs). Although downstream processing of IBs has the reputation of being a great hurdle, advantages of IBs can be substantial. Highly pure recombinant protein with the possibility of correctly folded structures and an easy separation from cell matter are decisive factors that make IB processes so interesting. Product yield, purity and biological activity of the refolded protein are the responses to evaluate an IB process. The objective of this case study was to develop a refolding process in an integrated manner. The effects of the unit operations 1) homogenization, 2) IB wash and 3) IB solubilisation as well as their interdependencies were analyzed. We revealed interesting factor interactions between homogenization and IB wash, as well as homogenization and solubilisation, which would be overlooked if the single unit operations were investigated individually. Furthermore, we found that homogenization was a key unit operation for IB processing. By changing the conditions during homogenization only, the product yield, purity and biological activity of the refolded product was affected 2-fold, 1.2-fold and 2.5-fold, respectively.

The Rocky Road From Fed-Batch to Continuous Processing With E. coli

Escherichia coli still serves as a beloved workhorse for the production of many biopharmaceuticals as it fulfills essential criteria, such as having fast doubling times, exhibiting a low risk of contamination, and being easy to upscale. Most industrial processes in E. coli are carried out in fed-batch mode. However, recent trends show that the biotech industry is moving toward time-independent processing, trying to improve the space-time yield, and especially targeting constant quality attributes. In the 1950s, the term "chemostat" was introduced for the first time by Novick and Szilard, who followed up on the previous work performed by Monod. Chemostat processing resulted in a major hype 10 years after its official introduction. However, enthusiasm decreased as experiments suffered from genetic instabilities and physiology issues. Major improvements in strain engineering and the usage of tunable promotor systems facilitated chemostat processes. In addition, critical process parameters have been identified, and the effects they have on diverse quality attributes are understood in much more depth, thereby easing process control. By pooling the knowledge gained throughout the recent years, new applications, such as parallelization, cascade processing, and population controls, are applied nowadays. However, to control the highly heterogeneous cultivation broth to achieve stable productivity throughout long-term cultivations is still tricky. Within this review, we discuss the current state of E. coli fed-batch process understanding and its tech transfer potential within continuous processing. Furthermore, the achievements in the continuous upstream applications of E. coli and the continuous downstream processing of intracellular proteins will be discussed.

Recombinant expression and purification of AF1q and its interaction with T-cell Factor 7

The protein ALL1 fused from chromosome 1q (AF1q) is overexpressed in a variety of cancers and acts to activate several signaling pathways that lead to oncogenesis. For example, AF1q has been shown to interact with T-cell Factor 7 (TCF7; also known as TCF1) from the Wnt/β-catenin pathway resulting in the transcriptional activation of the CD44 and the enhancement of breast cancer metastasis. Despite the importance of AF1q in facilitating oncogenesis and metastasis, the structural and biophysical properties of AF1q remain largely unexplored due to the absence of a viable method for producing recombinant protein. Here, we report the overexpression of AF1q in E. coli as a fusion to a N-terminal His₆-tag, which forms inclusion bodies (IBs) during expression. The AF1q protein was purified from IBs under denaturing conditions by immobilized metal affinity chromatography followed by a successful one-step dialysis refolding. Refolded AF1q was further purified to homogeneity by gel filtration chromatography resulting in an overall yield of 35 mg/L culture. Our nuclear magnetic resonance (NMR) and analytical ultracentrifugation (AUC) measurements reveal AF1q interacts with TCF7, specifically with TCF7's high-mobility group (HMG) domain (residues 154-237), which is, to our knowledge, the first biophysical characterization of the AF1q and TCF7 interaction.

New tools for recombinant protein production in Escherichia coli: A 5-year update

The production of proteins in sufficient amounts is key for their study or use as biotherapeutic agents. Escherichia coli is the host of choice for recombinant protein production given its fast growth, easy manipulation, and cost-effectiveness. As such, its protein production capabilities are continuously being improved. Also, the associated tools (such as plasmids and cultivation conditions) are subject of ongoing research to optimize product yield. In this work, we review the latest advances in recombinant protein production in E. coli.