A Critical Assessment of the Microorganisms Proposed to be Important to Enhanced Biological Phosphorus Removal in Full-Scale Wastewater Treatment Systems

Bacterial community and filamentous population of industrial wastewater treatment plants in Belgium

The discharge of industrial water requires the removal of its pollutants, where biological wastewater treatment plants (WWTPs) are the most used systems. Biological WWTPs make use of activated sludge (AS), where bacteria are responsible for the removal of pollutants. However, our knowledge of the microbial communities of industrial plants is limited. Understanding the microbial population is essential to provide solutions to industrial problems such as bulking. The aim of this study was to identify at a high taxonomic resolution the bacterial population of 29 industrial WWTPs using 16S rRNA amplicon sequencing. Our results revealed that the main functional groups were dominated by Thauera and Zoogloea within denitrifiers, Dechloromonas in phosphate-accumulating organisms, and Defluviicoccus in glycogen-accumulating organisms. The activated sludge characterization indicated that 59% of the industrial plants suffered from bulking sludge, with DSVI values of up to 448 mL g-1. From the bulking cases, 72% corresponded to filamentous bulking with Thiothrix as the most abundant filament; meanwhile, the other 28% corresponded to viscous bulking sludge in which Zoogloea was the most abundant genus. Furthermore, the bacterial population did not share a core of taxa across all industrial plants. However, 20 genera were present in at least 50% of the plants comprising the general core, including Thauera, Ca. Competibacter, and several undescribed microorganisms. Moreover, statistical analysis revealed that wastewater salinity strongly affected the microbial richness of the industrial plants. The bacterial population across industrial plants differed considerably from each other, resulting in unique microbial communities that are attributed to the specificity of their wastewaters. KEY POINTS: • The general core taxa of industrial plants were mostly made up of undescribed bacterial genera. • Filamentous bacteria constituted on average 4.1% read abundance of the industrial WWTPs. • Viscous bulking remains a significant type of bulking within industrial WWTPs.

Distinct microdiversity of phosphate accumulating organisms (PAOs) between side-stream and conventional enhanced biological phosphorus removal (EBPR) systems with performance implications

Polyphosphate Accumulating Organisms (PAOs) microdiversity is a key factor to elucidate the mechanisms involved in the side-stream enhanced biological phosphorus removal (S2EBPR) systems, which has been shown to improve the process stability over conventional EBPR. However, fast, effective and cost-efficient methods to resolve PAO microdiversity in real-world activate sludge samples is still in absence. In this study, we applied oligotyping analysis following the regular 16S rRNA gene amplicon sequencing standard operation pipeline (SOP) to resolve subgenus-level PAO oligotypes, which cannot be achieved using traditional 16S rRNA sequencing SOP. The identified oligotype profiles of PAO-containing genera Ca. Accumulibacter, Tetrasphaera and Comamonas showed distinguished community-level differences across 12 water resource recovery facilities (WRRFs), which would not be revealed at the genus level. The WRRF-level differences were observed larger than the temporal differences in the same WRRF, indicating intrinsic sub-genus level microdiversity fingerprint between EBPR/S2EBPR systems. The identified oligotypes can be associated with known PAO clades phylogenetically, suggesting that oligotyping can suffice as a fast and cost-efficient approach for PAO microdiversity profiling. In addition, network analysis can be used to identify coexistence patterns between oligotypes with respect to EBPR/S2EBPR configurations and performance, enabling more detailed analysis between EBPR system performance and PAOs microdiversity. Correlation analyses between oligotype profiles and key EBPR performance parameters revealed potential different biological functional traits among these PAO species with P-removal performance implications.

What is the Difference between Conventional Drinking Water, Potable Reuse Water, and Nonpotable Reuse Water? A Microbiome Perspective

As water reuse applications expand, there is a need for more comprehensive means to assess water quality. Microbiome analysis could provide the ability to supplement fecal indicators and pathogen profiling toward defining a "healthy" drinking water microbiota while also providing insight into the impact of treatment and distribution. Here, we utilized 16S rRNA gene amplicon sequencing to identify signature features in the composition of microbiota across a wide spectrum of water types (potable conventional, potable reuse, and nonpotable reuse). A clear distinction was found in the composition of microbiota as a function of intended water use (e.g., potable vs nonpotable) across a very broad range of U.S. water systems at both the point of compliance (Betadisper p > 0.01; ANOSIM p < 0.01, r-stat = 0.71) and point of use (Betadisper p > 0.01; ANOSIM p < 0.01, r-stat = 0.41). Core and discriminatory analysis further served in identifying distinct differences between potable and nonpotable water microbiomes. Taxa were identified at both the phylum (Desulfobacterota, Patescibacteria, and Myxococcota) and genus (Aeromonas and NS11.12_marine_group) levels that effectively discriminated between potable and nonpotable waters, with the most discriminatory taxa being core/abundant in nonpotable waters (with few exceptions, such as Ralstonia being abundant in potable conventional waters). The approach and findings open the door to the possibility of microbial community signature profiling as a water quality monitoring approach for assessing efficacy of treatments and suitability of water for intended use/reuse application.

Isolation and optimisation of polyphosphate accumulating bacteria for bio-treatment of phosphate from industrial wastewater

Phosphorus in wastewater influents is a global issue. Controlling eutrophic water is crucial. Biological phosphorus removal is an economically and environmentally sustainable method for removing phosphorus from wastewater. This study aims to isolate and improve the capacity of aerobic phosphorus-removing bacteria to reduce excessive phosphate concentrations in the environment. Only three out of fourteen bacterial isolates demonstrated the highest phosphate removal efficiency using Toluidine blue-O. Klebsiella pneumoniae 6A, Klebsiella quasipneumoniae 6R, and Enterobacter mori 8R were isolated from activated sludge and identified by 16srRNA. In a single-factor experiment, the effect of incubation periods, phosphate concentrations, carbon sources, sodium acetate concentrations, temperature, pH, and irradiation dosages were studied. Seventy-two hours of incubation, 55 mg/L PO4, sodium acetate as the carbon source, 30°C and pH 7 resulted in maximum phosphorus removal. After optimising the parameters, the removal efficiency of Klebsiella pneumoniae 6A, Klebsiella quasipneumoniae 6R, and Enterobacter mori 8R increased from 73.5% to 85.1%, 79.1% to 98.1%, and 80.6% to 91.9%, respectively. Gamma irradiation showed significant results only in Klebsiella pneumoniae 6A where 100 Gy increased the phosphorous removal efficiency from 85.1% to 100%. Immobilised mixed culture of the three strains adapted better to 100 mg/L Phosphorus than pure cells. Therefore, this technique holds great new promise for phosphorus-contaminated sites bioremediation.

The phototrophic metabolic behaviour of Candidatus accumulibacter

The phototrophic capability of Candidatus Accumulibacter (Accumulibacter), a common polyphosphate accumulating organism (PAO) in enhanced biological phosphorus removal (EBPR) systems, was investigated in this study. Accumulibacter is phylogenetically related to the purple bacteria Rhodocyclus from the family Rhodocyclaceae, which belongs to the class Betaproteobacteria. Rhodocyclus typically exhibits both chemoheterotrophic and phototrophic growth, however, limited studies have evaluated the phototrophic potential of Accumulibacter. To address this gap, short and extended light cycle tests were conducted using a highly enriched Accumulibacter culture (95%) to evaluate its responses to illumination. Results showed that, after an initial period of adaptation to light conditions (approximately 4-5 h), Accumulibacter exhibited complete phosphorus (P) uptake by utilising polyhydroxyalkanoates (PHA), and additionally by consuming glycogen, which contrasted with its typical aerobic metabolism. Mass, energy, and redox balance analyses demonstrated that Accumulibacter needed to employ phototrophic metabolism to meet its energy requirements. Calculations revealed that the light reactions contributed to the generation of, at least more than 67% of the ATP necessary for P uptake and growth. Extended light tests, spanning 21 days with dark/light cycles, suggested that Accumulibacter generated ATP through light during initial operation, however, it likely reverted to conventional anaerobic/aerobic metabolism under dark/light conditions due to microalgal growth in the mixed culture, contributing to oxygen production. In contrast, extended light tests with an enriched Tetrasphaera culture, lacking phototrophic genes in its genome, clearly demonstrated that phototrophic P uptake did not occur. These findings highlight the adaptive metabolic capabilities of Accumulibacter, enabling it to utilise phototrophic pathways for energy generation during oxygen deprivation, which holds the potential to advance phototrophic-EBPR technology development.

Inhibition of phosphorus removal performance in activated sludge by Fe(III) exposure: transitions in dominant metabolic pathways

Introduction

Simultaneous chemical phosphorus removal process using iron salts (Fe(III)) has been widely utilized in wastewater treatment to meet increasingly stringent discharge standards. However, the inhibitory effect of Fe(III) on the biological phosphorus removal system remains a topic of debate, with its precise mechanism yet to be fully understood.

Methods

Batch and long-term exposure experiments were conducted in six sequencing batch reactors (SBRs) operating for 155 days. Synthetic wastewater containing various Fe/P ratios (i.e., Fe/P = 1, 1.2, 1.5, 1.8, and 2) was slowly poured into the SBRs during the experimental period to assess the effects of acute and chronic Fe(III) exposure on polyphosphate-accumulating organism (PAO) growth and phosphorus metabolism.

Results

Experimental results revealed that prolonged Fe(III) exposure induced a transition in the dominant phosphorus removal mechanism within activated sludge, resulting in a diminished availability of phosphorus for bio-metabolism. In Fe(III)-treated groups, intracellular phosphorus storage ranged from 3.11 to 7.67 mg/g VSS, representing only 26.01 to 64.13% of the control. Although the abundance of widely reported PAOs (Candidatus Accumulibacter) was 30.15% in the experimental group, phosphorus release and uptake were strongly inhibited by high dosage of Fe(III). Furthermore, the abundance of functional genes associated with key enzymes in the glycogen metabolism pathway increased while those related to the polyphosphate metabolism pathway decreased under chronic Fe(III) stress.

Discussion

These findings collectively suggest that the energy generated from polyhydroxyalkanoates oxidation in PAOs primarily facilitated glycogen metabolism rather than promoting phosphorus uptake. Consequently, the dominant metabolic pathway of communities shifted from polyphosphate-accumulating metabolism to glycogen-accumulating metabolism as the major contributor to the decreased biological phosphorus removal performance.

Aerobic digestibility of waste aerobic granular sludge (AGS) assessed by respirometry, physical-chemical analyses, modeling and 16S rRNA gene sequencing

Research has evolved on aerobic granular sludge (AGS) process, but still there are very few studies on the treatment of excess AGS sludge, with almost none considering its aerobic digestion. Here therefore, the aerobic digestibility of typical AGS sludge was assessed. Granules were produced from acetate-based synthetic wastewater (WW) and were subjected to aerobic digestion for 64 d. The stabilization process was monitored over time through physical-chemical parameters, oxygen uptake rates (OUR) and 16S rRNA gene sequencing. The microbial analyses revealed that the cultivated granules were dominated by slow-growing bacteria, mainly ordinary heterotrophic organisms with potential for polyhydroxyalkanoates (PHA) aerobic storage (PHA-OHOs), polyphosphate and glycogen accumulating organisms (PAOs and GAOs), fermentative anaerobes and nitrifiers (AOB and NOB). Differential abundance analysis of the bacterial data (before versus after digestion) discriminated between the most vulnerable microbiome genera and those most resistant to aerobic digestion. Furthermore, modeling of the stabilization process determined that the endogenous decay rate constant (bH) for the heterotrophs present in the granules was notably low; bH = 0.05 d-1 (average), four times less than for common activated sludge (AS), which is rated at 0.2 d-1. For first time, the research reveals another important feature of AGS sludge, i.e. the slow-decaying character of its bacteria (along with their known slow-growing character). This results in slower stabilization, need of bigger digesters and reconsideration of the specific OUR limits in biosolids regulations (SOUR limit of 1.5 mg/gTSS.h), for waste AGS compared to conventional waste AS. The study suggests that aerobic digestion of waste AGS (fully-granulated) could differ from that of conventional AS. Future work is needed on aerobic digestibility of real AGS sludges from municipal and industrial WWs, compared to synthetic WWs.

Strategies to attenuate ciprofloxacin inhibition on enhanced biological phosphorus removal from wastewater and its recoverability

The inhibiting effects of ciprofloxacin (CIP) on enhanced biological phosphorus removal (EBPR) were investigated with no change in reactor operation and with increased aeration rate and sludge retention time (SRT) to explore inhibition-alleviating solutions. Additionally, performance recoverability was evaluated. The results showed that the phosphorus removal efficiency in the presence of 0.002-0.092 mg/L CIP for 7 days was only 12.5%. Increasing the aeration rate relieved inhibition (33.5% phosphorus removal efficiency on Day 7), and increasing SRT slowed EBPR performance deterioration. The EBPR performance recovered from CIP inhibition and increases in the aeration rate and SRT resulted in different recovery phenomena. The maximum PO43--P release rate continued to decrease in the first 2 days of the recovery stage and then gradually increased. However, the maximum PO43--P uptake rate immediately increased at different rates among reactors, which might be attributed to variations in the microbial community structure, decreased poly-P content, and enhanced abundances of ABC transporters and quorum sensing. It was found that some microorganisms associated with phosphorus removal were more tolerant to CIP than glycogen accumulating organisms. Moreover, the increased relative abundance of the qepA gene indicated that the microorganisms in the EBPR system had strong antibiotic resistance capacity. The bacterial community structure was significantly affected by CIP and could not recover to the initial structure. The results help to provide technical support for the operation of the EBPR process in the presence of CIP and to increase the understanding of system recoverability.

Revisiting the role of Acinetobacter spp. in side-stream enhanced biological phosphorus removal (S2EBPR) systems

We piloted the incorporation of side-stream enhanced biological phosphorus removal (S2EBPR) with A/B stage short-cut nitrogen removal processes to enable simultaneous carbon-energy-efficient nutrients removal. This unique configuration and system conditions exerted selective force on microbial populations distinct from those in conventional EBPR. Interestingly, effective P removal was achieved with the predominance of Acinetobacter (21.5 ± 0.1 %) with nearly negligible level of known conical PAOs (Ca. Accumulibacter and Tetrasphaera were 0.04 ± 0.10 % and 0.47 ± 0.32 %, respectively). Using a combination of techniques, such as fluorescence in situ hybridization (FISH) coupled with single cell Raman spectroscopy (SCRS), the metabolic tracing of Acinetobacter-like cells exerted PAO-like phenotypic profiling. In addition, comparative metagenomics analysis of the closely related Acinetobacter spp. revealed the EBPR relevant metabolic pathways. Further oligotyping analysis of 16s rRNA V4 region revealed sub-clusters (microdiversity) of the Acinetobacter and revealed that the sub-group (oligo type 1, identical (100 % alignment identity) hits from Acinetobacter_midas_s_49494, and Acinetobacter_midas_s_55652) correlated with EBPR activities parameters, provided strong evidence that the identified Acinetobacter most likely contributed to the overall P removal in our A/B-shortcut N-S2EBPR system. To the best of our knowledge, this is the first study to confirm the in situ EBPR activity of Acinetobacter using combined genomics and SCRS Raman techniques. Further research is needed to identify the specific taxon, and phenotype of the Acinetobacter that are responsible for the P-removal.

A comprehensive investigation to the fate of phosphorus in full-scale wastewater treatment plants using aluminum salts for enhanced phosphorus removal

This study investigated the fate of phosphorus (P) in 8 full-scale municipal wastewater treatment plants (WWTPs) in Shanghai, China, in which both biological nutrient removal and aluminum-based chemical phosphorus removal were used. The results showed that 83.8-98.9 % P was transferred to the sludge in the 8 WWTPs by both chemical and biological reactions. P speciation analysis indicated that chemical P precipitates accounted for 84.3 % in the activated sludge, of which crystalline AlPO4 and amorphous iron‑phosphorus compounds (FePs) were the main components. Sludge with more water-soluble and weakly adsorbed P was generated in the anaerobic-anoxic-oxic (A/A/O) process than in other processes. Among the 8 WWTPs, the one with the largest flow rate and relatively short sludge retention time (SRT) had the best potential to release P from all types of sludge. The recovery potential of P from thickened sludge can be improved by separately thickening the sludge produced in the high-efficiency sedimentation tank or feeding it into the dewatering process directly. Different P removal chemicals and dosing points changed the amount of chemical precipitate formed but had little effect on the composition of P accumulating organisms (PAOs) at the genus level. Although aluminum-based coagulants were applied in the investigated WWTPs, Fe in wastewater had the most positive effect on the proliferation of PAOs. The synthesis of polyphosphate was also related to the metabolism of PAOs as it affected transmembrane inorganic phosphate (Pi) transport and polyhydroxybutyrate (PHB) synthesis. The in-depth understanding of the fate of P is beneficial to improve P recovery efficiency in WWTPs.

Discovery of a novel potential polyphosphate accumulating organism without denitrifying phosphorus uptake function in an enhanced biological phosphorus removal process

Enhanced biological phosphorus removal (EBPR) is an effective process for phosphorus removal from wastewater. In this study, two lab-scale sequencing batch reactors (SBR) were used to perform EBPR process, in which genus Propioniciclava was unexpectedly accumulated and its relative abundance was over 70 %. A series of tests were conducted to explore the role of Propioniciclava in the two EBPR systems. The two systems performed steadily throughout the study, and the phosphorus removal efficiencies were 96.6 % and 93.5 % for SBR1 and SBR2, respectively. The stoichiometric analysis related to polyphosphate accumulating organisms (PAOs) indicated that polyphosphate accumulating metabolism (PAM) was achieved in the anaerobic phase. It appeared that the Propioniciclava-dominated systems could not perform denitrifying phosphorus removal. Instead, phosphorus was released under anoxic conditions without carbon sources. According to the genomic information from Integrated Microbial Genomes (IMG) database, Propioniciclava owns ppk1, ppk2 and ppx genes that are associated with phosphorus release and uptake functions. By phylogenetic investigation of communities by reconstruction of unobserved states 2 (PICRUSt2) analysis, the abundance of genes related to phosphorus metabolism was much higher than that of genes related to denitrification. Therefore, Propioniciclava was presumed to be a potential PAO without denitrifying phosphorus uptake function. In addition to Propioniciclava, Tessaracoccus and Thiothrix were also enriched in both systems. Overall, this study proposes a novel potential PAO and broadens the understanding of EBPR microbial communities.

Temporal metagenomic characterization of microbial community structure and nitrogen modification genes within an activated sludge bioreactor system

IMPORTANCE

Wastewater treatment plays an essential role in minimizing negative impacts on downstream aquatic environments. Microbial communities are known to play a vital role in the wastewater treatment process, particularly in the removal of nitrogen and phosphorus, which can be especially damaging to aquatic ecosystems. There is limited understanding of how these microbial communities may change in response to fluctuating temperatures or how seasonality may impact their ability to participate in the treatment process. The findings of this study indicate that the microbial communities of wastewater are relatively stable both compositionally and functionally across fluctuating temperatures.

Full-scale demonstration of a floating seal for enhanced biological nutrient removal in a sequencing batch reactor establishing chemical-free environment in wastewater treatment at low carbon source availability

Due to the cyclical nature and changing water levels in the sequencing batch reactor (SBR), oxygen diffusion and utilization can be difficult to control particularly in light of the need to conserve the limited quantity of carbon source required to optimize biological nutrient removal. During the fill period, oxygen penetration may be undesirable since heterotrophic and autotrophic organisms cause a reduction in the readily biodegradable carbon source (rbCOD). This carbon source is essential and often limited in the anaerobic and anoxic periods. As a consequence, unwanted oxygen penetration can hinder efficient biological phosphorus and nitrogen removal. The purpose of the present research was to verify the advantage of a floating seal on the continuously moving surface of an SBR reactor to minimize undesirable oxygen penetration. In the floating seal-covered SBR both nitrification and denitrification efficiency proved to be higher due to insulation, and even during wintertime biological phosphorus removal met target removals without chemical dosing. The SVI values in the two SBR trains proved to be close to each other, despite the high difference in chemical dosing. Having experienced the higher efficiency of the seal-covered train, microbiome compositions of the two differently operated systems were investigated to determine potential differences via 16S rRNA gene amplicon sequencing experiments. In the samples taken from the seal-covered system, higher ratios of fermentative bacteria and phosphate accumulating organisms (PAOs) as well as glycogen accumulating organisms (GAOs) could be observed as compared to the samples deriving from the uncovered system.HighlightsSeal-covering the periodically decreasing open water surface increased SBR efficiencySeal-covering the open water surface increased nitrification efficiency by insulationNo chemical dosing was necessary for phosphorous removal in the Test systemMetagenome investigations provided almost doubled amount of fermentative bacteriaProduction of GAOs indicated nutrient deficiency due to phosphorous removal.

Blind spots of universal primers and specific FISH probes for functional microbe and community characterization in EBPR systems

Fluorescence in situ hybridization (FISH) and 16S rRNA gene amplicon sequencing are commonly used for microbial ecological analyses in biological enhanced phosphorus removal (EBPR) systems, the successful application of which was governed by the oligonucleotides used. We performed a systemic evaluation of commonly used probes/primers for known polyphosphate-accumulating organisms (PAOs) and glycogen-accumulating organisms (GAOs). Most FISH probes showed blind spots and covered nontarget bacterial groups. Ca. Competibacter probes showed promising coverage and specificity. Those for Ca. Accumulibacter are desirable in coverage but targeted out-group bacteria, including Ca. Competibacter, Thauera, Dechlorosoma, and some polyphosphate-accumulating Cyanobacteria. Defluviicoccus probes are good in specificity but poor in coverage. Probes targeting Tetrasphaera or Dechloromonas showed low coverage and specificity. Specifically, DEMEF455, Bet135, and Dech453 for Dechloromonas covered Ca. Accumulibacter. Special attentions are needed when using these probes to resolve the PAO/GAO phenotype of Dechloromonas. Most species-specific probes for Ca. Accumulibacter, Ca. Lutibacillus, Ca. Phosphoribacter, and Tetrasphaera are highly specific. Overall, 1.4% Ca. Accumulibacter, 9.6% Ca. Competibacter, 43.3% Defluviicoccus, and 54.0% Dechloromonas in the MiDAS database were not covered by existing FISH probes. Different 16S rRNA amplicon primer sets showed distinct coverage of known PAOs and GAOs. None of them covered all members. Overall, 520F-802R and 515F-926R showed the most balanced coverage. All primers showed extremely low coverage of Microlunatus (<36.0%), implying their probably overlooked roles in EBPR systems. A clear understanding of the strength and weaknesses of each probe and primer set is a premise for rational evaluation and interpretation of obtained community results.

Microbial community dynamics and metagenomics reveal the potential role of unconventional functional microorganisms in nitrogen and phosphorus removal biofilm system

The conventional functional microorganisms for nitrogen and phosphorus removal, such as Nitrosomonas, Nitrobacter, Nitrospira and Candidatus Accumulibacter, were hotspots in past research. However, the role of diverse unconventional functional microorganisms was neglected. In this study, a biofilm system was developed to explore the potential role of unconventional functional microorganisms in nutrients removal. According to the results of microbial community dynamics and metagenomics, complete ammonia oxidizing (comammox) bacteria was 20 times more abundant than ammonia-oxidizing bacteria (AOB) at day 121 and its abundance of amoA gene was almost the same as AOB. Although Nitrospira dominated the nitrite-oxidizing bacteria (NOB), diverse unconventional nxrB-containing microorganisms, particularly Chloroflexi, also significantly contributed to the nitrite oxidation. Binning analysis showed that Myxococcota-affiliated Haliangium had the necessary genes owns by phosphorus-accumulating organisms (PAO) and was likely to be the primary PAO since its abundance (6.38 %) was much higher than other conventional PAO (0.70 %). Comparing metagenome-assembled genomes of comammox bacteria with AOB and ammonia-oxidizing archaea (AOA), it possessed potential metabolic versatility in hydrogen and phosphorus, which may be the primary reason for the positive effect of the alternating anaerobic and aerobic conditions on the enrichment of comammox bacteria. Collectively, our findings broaden the understanding on the microbial mechanism of nitrogen and phosphorus removal in biofilm system.

New insight into the granule formation in the reactor for enhanced biological phosphorus removal

While granulated activated sludge exhibits high productivity, the processes of granule formation are incompletely studied. The processes of granule formation and succession of communities were investigated in a laboratory sequencing batch reactor (SBR) under conditions for enhanced biological phosphorus removal (EBPR) using microbiological and molecular techniques. Active consumption of acetate, primarily by the phosphate-accumulating organisms (PAO), commenced at day 150 of cultivation. This was indicated by the high ratio of molar P-released/acetate uptake (0.73-0.77 P-mol/C-mol), characteristic of PAO. During this period, two types of granule-like aggregates formed spontaneously out of the activated sludge flocs. The aggregates differed in morphology and microbial taxonomic composition. While both aggregate types contained phosphorus-enriched bacterial cells, PAO prevailed in those of morphotype I, and glycogen-accumulating organisms (GAOs) were predominant in the aggregates of morphotype II. After 250 days, the elimination of the morphotype II aggregates from the reactor was observed. The subsequent selection of the community was associated with the development of the morphotype I aggregates, in which the relative abundance of PAO increased significantly, resulting in higher efficiency of phosphorus removal. Metagenomic analysis revealed a predominance of the organisms closely related to Candidatus Accumulibacter IС and IIС and of Ca. Accumulibacter IIB among the PAO. Based on the content of the genes of the key metabolic pathways, the genomes of potential PAO belonging to the genera Amaricoccus, Azonexus, Thauera, Zoogloea, Pinisolibacter, and Siculibacillus were selected. The patterns of physicochemical processes and the microbiome structure associated with granule formation and succession of the microbial communities were revealed.

Performance of a modified and intermittently operated slow sand filter with two different mediums in removing turbidity, ammonia, and phosphate with varying acclimatization periods

The present study investigated the utilization of blood clam shells as a potential substitute for conventional media, as well as the influence of the acclimation time on the efficacy of an intermittent slow sand filter (ISSF) in the treatment of real domestic wastewater. ISSF was operated with 16 h on and 8 h off, focusing on the parameters of turbidity, ammonia, and phosphate. Two media combinations (only blood clam shells [CC] and sand + blood clam shells [SC]) were operated under two different acclimatization periods (14 and 28 d). Results showed that SC medium exhibited significantly higher removal of turbidity (p < 0.05) as compared to CC medium (45.99 ± 26.84 % vs. 3.79 ± 9.35 %), while CC exhibited slightly higher (p > 0.05) removal of ammonia (23.12 ± 20.2 % vs. 16.77 ± 16.8 %) and phosphate (18.03 ± 11.96 % vs 13.48 ± 12 %). Comparing the acclimatization periods, the 28 d of acclimatization period showed higher overall performances than the 14 d. Further optimizations need to be conducted to obtain an effluent value below the national permissible limit, since the ammonia and phosphate parameters are still slightly higher. SEM analysis confirmed the formation of biofilm on both mediums after 28 d of acclimatization; with further analysis of schmutzdecke formation need to be carried out to enrich the results.

Metaproteomics, metagenomics and 16S rRNA sequencing provide different perspectives on the aerobic granular sludge microbiome

The tremendous progress in sequencing technologies has made DNA sequencing routine for microbiome studies. Additionally, advances in mass spectrometric techniques have extended conventional proteomics into the field of microbial ecology. However, systematic studies that provide a better understanding of the complementary nature of these 'omics' approaches, particularly for complex environments such as wastewater treatment sludge, are urgently needed. Here, we describe a comparative metaomics study on aerobic granular sludge from three different wastewater treatment plants. For this, we employed metaproteomics, whole metagenome, and 16S rRNA amplicon sequencing to study the same granule material with uniform size. We furthermore compare the taxonomic profiles using the Genome Taxonomy Database (GTDB) to enhance the comparability between the different approaches. Though the major taxonomies were consistently identified in the different aerobic granular sludge samples, the taxonomic composition obtained by the different omics techniques varied significantly at the lower taxonomic levels, which impacts the interpretation of the nutrient removal processes. Nevertheless, as demonstrated by metaproteomics, the genera that were consistently identified in all techniques cover the majority of the protein biomass. The established metaomics data and the contig classification pipeline are publicly available, which provides a valuable resource for further studies on metabolic processes in aerobic granular sludge.

Deciphering antibiotic resistome variations during nitrogen removal process transition under mixed antibiotics stress: Assembly process and driving factors

Antibiotic resistome, which encompasses all types of antibiotic resistance genes (ARGs) in a given environment, has received increasing attention in research on different wastewater treatment processes. However, the variation in antibiotic resistome during the transition from the full nitrification-denitrification to the shortcut nitrification-denitrification process remains unclear. In this study, a total of 269 targeted gene subtypes were identified, along with 108 genes were consistently present in all samples. The introduction of mixed antibioticsrapidly increased the abundance of corresponding and non-corresponding ARGs, as well as that of mobile genetic elements.The variations in of the antibiotic resistome were primarily driven by dissolved oxygen and nitrite accumulation rate. Moreover, 34 bacterial genera were identified as potential ARG hosts, with most denitrifiers considered as potential antibiotic-resistant bacteria, including Branchymonas, Rhodobacter, and Thauera. This study provides a method for controlling antibiotic resistance by regulating the changes in environmental variables and bacterial communities.

Modeling versatile and dynamic anaerobic metabolism for PAOs/GAOs competition using agent-based model and verification via single cell Raman Micro-spectroscopy

Side-stream enhanced biological phosphorus removal process (S2EBPR) has been demonstrated to improve performance stability and offers a suite of advantages compared to conventional EBPR design. Design and optimization of S2EBPR require modification of the current EBPR models that were not able to fully reflect the metabolic functions of and competition between the polyphosphate-accumulating organisms (PAOs) and glycogen-accumulating organisms (GAOs) under extended anaerobic conditions as in the S2EBPR conditions. In this study, we proposed and validated an improved model (iEBPR) for simulating PAO and GAO competition that incorporated heterogeneity and versatility in PAO sequential polymer usage, staged maintenance-decay, and glycolysis-TCA pathway shifts. The iEBPR model was first calibrated against bulk batch testing experiment data and proved to perform better than the previous EBPR model for predicting the soluble orthoP, ammonia, biomass glycogen, and PHA temporal profiles in a starvation batch testing under prolonged anaerobic conditions. We further validated the model with another independent set of anaerobic testing data that included high-resolution single-cell and specific population level intracellular polymer measurements acquired with single-cell Raman micro-spectroscopy technique. The model accurately predicted the temporal changes in the intracellular polymers at cellular and population levels within PAOs and GAOs, and further confirmed the proposed mechanism of sequential polymer utilization, and polymer availability-dependent and staged maintenance-decay in PAOs. These results indicate that under extended anaerobic phases as in S2EBPR, the PAOs may gain competitive advantages over GAOs due to the possession of multiple intracellular polymers and the adaptive switching of the anaerobic metabolic pathways that consequently lead to the later and slower decay in PAOs than GAOs. The iEBPR model can be applied to facilitate and optimize the design and operations of S2EBPR for more reliable nutrient removal and recovery from wastewater.

Effect of return activated sludge diversion ratio on phosphorus removal performance in side-stream enhanced biological phosphorus removal (S2EBPR) process

In this study, a lab-scale continuous flow side-stream enhanced biological phosphorus (P) removal (S2EBPR) reactor was operated for 247 days treating synthetic wastewater with influent carbon to phosphorus (C/P) ratio of 25.0 g COD/g P and influent PO43--P of 7.4 ± 0.3 mg P/L. The effect of the return activated sludge (RAS) diversion ratio on S2EBPR reactor was investigated by comparing P removal performance, microbial activity, and community structure. The results showed that the RAS diversion ratio of 8.0%, by yielding a side-stream sludge retention time (SRTSS) of ∼60 h, resulted in the lowest effluent PO43--P concentration of 0.5 ± 0.3 mg P/L. The results of in situ process profiles and ex situ P release and uptake batch tests under different RAS diversion conditions showed that the more anaerobic P release was obtained in the side-stream reactor, the higher the P removal efficiency and EBPR activity were achieved. The stoichiometric ratios observed in EBPR activity tests indicated a polyphosphate accumulating organisms (PAOs) metabolism mainly dependent on the glycolysis pathway. The results of microbial ecology analysis revealed that the optimized SRTSS would give a competitive advantage to PAOs in the S2EBPR process. By obtaining statistically reliable results, this study would provide guidance for wastewater treatment plants to achieve optimal P removal performance in S2EBPR configuration.

Microbiome assembly mechanism and functional potential in enhanced biological phosphorus removal system enriched with Tetrasphaera-related polyphosphate accumulating organisms

Tetrasphaera-related polyphosphate accumulating organisms (PAOs) are the key functional guilds for enhanced biological phosphorus removal (EBPR) systems. Their biomass enrichment can be enhanced by the nitrification inhibitor allylthiourea (ATU). However, the underlying assembly mechanism and the functional potential of the EBPR microbiome regulated by ATU are unclear. This study investigates the effect of ATU on microbiome assembly and functional potential by closely following the microbiota dynamics in an EBPR system enriched with Tetrasphaera-related PAOs for 288-days before, during and after ATU addition. The results showed that ATU addition increased microbiota structural similarity and compositional convergence, and enhanced determinism in the assembly of EBPR microbiome. During exposure to ATU, Tetrasphaera-related PAOs were governed by homogeneous selection and the dominant species revealed by 16S rRNA gene-based phylogenetic analysis shifted from clade III to clade I. Meanwhile, ATU supply promoted significant enrichment of functional genes involved in phosphate transport (pit) and polyphosphate synthesis and degradation (ppk1 and ppk2), whereas both Nitrosomonas and ammonia monooxygenase-encoding genes (amoA/B/C) assignable to this group of nitrifying bacteria decreased. Moreover, ATU addition relieved the significant abundance correlation between filamentous bacteria Ca. Promineofilum and denitrifying Brevundimonas (FDR-adjusted P < 0.01), damaging their potential synergic or cooperative interactions, thus weakening their competitiveness against Tetrasphaera-related PAOs. Notably, ATU withdrawn created opportunistic conditions for the unexpected explosive growth and predominance of Thiothrix filaments, leading to a serious bulking event. Our study provides new insights into the microbial ecology of Tetrasphaera-related PAOs in EBPR system, which could guide the establishment of an efficient microbiota for EBPR.

Enhanced biological phosphorus removal by high concentration powder carrier bio-fluidized bed (HPB): Phosphorus distribution, cyclone separation, and metagenomics

This study provides a comparative investigation of phosphorus removal between anaerobic-anoxic-oxic (AAO) and high-concentration powder carrier bio-fluidized bed (HPB) in the same full-scale wastewater treatment plant. The results showed that the total phosphorus removal of HPB was 71.45%-96.71%. Compared with AAO, the total phosphorus removal of HPB can be increased by a maximum of 15.73%. The mechanisms of enhanced phosphorus removal by HPB include the followings. Biological phosphorus removal was significant. The anaerobic phosphorus release capacity of HPB was enhanced and polyphosphate (Poly-P) in the excess sludge of HPB was 1.5 times higher than that of AAO. The relative abundance of Candidatus Accumulibacter was 5 times higher than that of AAO, and oxidative phosphorylation and butanoate metabolism were enhanced. The analysis of phosphorus distribution showed that cyclone separation increased the chemical phosphorus precipitation (Chem-P) in the excess sludge by 16.96% to avoid accumulation in the biochemical tank. The phosphorus adsorbed by extracellular polymeric substance (EPS) in the recycled sludge was stripped, and the EPS bound-P in the excess sludge increased by 1.5 times. This study demonstrated the feasibility of HPB to improve the phosphorus removal efficiency for domestic wastewater.

Mechanisms of persistence and impact of ordinary heterotrophic organisms in aerobic granular sludge

The stability of granules, contaminant removal and microbial structure of an aerobic granular sludge (AGS) process were investigated with a focus on ordinary heterotrophic organisms (OHOs). Long-term stable granules and high removals of COD (97 %), NH₄⁺ (98 %), P (85 %) and total N (77 %) were achieved. Sequencing analyses identified 6.6 % of phosphorus-accumulating organisms in the sludge, concordant with the observed bio-P removal capacity. However, OHOs were the most abundant bacteria in the sludge (70-93 %) without resulting in unstable aggregates. Under current dogmas of microbial competition in activated sludge, it seemed contradictory that OHOs could persist in the long term in the AGS where COD was depleted beginning in the anaerobic phase. Microbial analyses showed that OHOs could survive in granules by micropredation, proteolysis, fermentation and EPS consumption. Heterotrophic-nitrification/ aerobic-denitrification was an active pathway in the AGS. These findings contribute to a better understanding of microbial competition in AGS and its stability.

Enhancing phosphorus removal of photogranules by incorporating polyphosphate accumulating organisms

Photogranules are a novel wastewater treatment technology that can utilize the sun's energy to treat water with lower energy input and have great potential for nutrient recovery applications. They have been proven to efficiently remove nitrogen and carbon but show lower conversion rates for phosphorus compared to established treatment systems, such as aerobic granular sludge. In this study, we successfully introduced polyphosphate accumulating organisms (PAOs) to an established photogranular culture. We operated photobioreactors in sequencing batch mode with six cycles per day and alternating anaerobic (dark) and aerobic (light) phases. We were able to increase phosphorus removal/recovery by 6 times from 5.4 to 30 mg/L/d while maintaining similar nitrogen and carbon removal compared to photogranules without PAOs. To maintain PAOs activity, alternating anaerobic feast and aerobic famine conditions were required. In future applications, where aerobic conditions are dependent on in-situ oxygenation via photosynthesis, the process will rely on sunlight availability. Therefore, we investigated the feasibility of the process under diurnal cycles with a 12-h anaerobic phase during nighttime and six short cycles during the 12 h daytime. The 12-h anaerobic phase had no adverse effect on the PAOs and phototrophs. Due to the extension of one anaerobic phase to 12 h the six aerobic phases were shortened by 47% and consequently decreased the light hours per day. This resulted in a decrease of phototrophs, which reduced nitrogen removal and biomass productivity up to 30%. Finally, we discuss and suggest strategies to apply PAO-enriched photogranules at large-scale.

The impact of pH on the anaerobic and aerobic metabolism of Tetrasphaera-enriched polyphosphate accumulating organisms

Members of the genus Tetrasphaera are putative polyphosphate accumulating organisms (PAOs) that have been found in greater abundance than Accumulibacter in many full-scale enhanced biological phosphorus removal (EBPR) wastewater treatment plants worldwide. Nevertheless, previous studies on the effect of environmental conditions, such as pH, on the performance of EBPR have focused mainly on the response of Accumulibacter to pH changes. This study examines the impact of pH on a Tetrasphaera PAO enriched culture, over a pH range from 6.0 to 8.0 under both anaerobic and aerobic conditions, to assess its impact on the stoichiometry and kinetics of Tetrasphaera metabolism. It was discovered that the rates of phosphorus (P) uptake and P release increased with an increase of pH within the tested range, while PHA production, glycogen consumption and substrate uptake rate were less sensitive to pH changes. The results suggest that Tetrasphaera PAOs display kinetic advantages at high pH levels, which is consistent with what has been observed previously for Accumulibacter PAOs. The results of this study show that pH has a substantial impact on the P release and uptake kinetics of PAOs, where the P release rate was >3 times higher and the P uptake rate was >2 times higher at pH 8.0 vs pH 6.0, respectively. Process operational strategies promoting both Tetrasphaera and Accumulibacter activity at high pH do not conflict with each other, but lead to a potentially synergistic impact that can benefit EBPR performance.

Elucidating performance failure in the use of an Anaerobic-Oxic-Anoxic (AOA) plug-flow system for biological nutrient removal

The Anaerobic-oxic-anoxic (AOA) process is a carbon-saving and high-efficiency way to treat municipal wastewater and gets more attention. Recent reports suggest that in the AOA process, well-performed endogenous denitrification (ED), conducted by glycogen accumulating organisms (GAOs), is crucial to advanced nutrient removal. However, the consensuses about starting up and optimizing AOA, and in-situ enriching GAOs, are still lacking. Hence, this study tried to verify whether AOA could be established in an ongoing anaerobic-oxic (AO) system. For this aim, a lab-scale plug-flow reactor (working volume of 40 L) previously operated under AO mode for 150 days, during that 97.87 % of ammonium was oxidized to nitrate and 44.4 % of orthophosphate was absorbed. Contrary to expectations, under AOA mode, little nitrate reduction (only 6.3 mg/L within 5.33 h) indicated the failure of ED. According to high-throughput sequencing analysis, GAOs (Candidatus_Competibacter and Defluviicoccus) were enriched within the AO period (14.27 % and 3 %) and then still dominated during the AOA period (13.9 % and 10.07 %) but contributed little to ED. Although apparent alternate orthophosphate variations existed in this reactor, no typical phosphorus accumulating organisms were abundant (< 2 %). More than that, within the long-term AOA operation (109 days), the nitrification weakened (merely 40.11 % of ammonium been oxidized) since the dual effects of low dissolved oxygen and long unaerated duration. This work reveals the necessity of developing practical strategies for starting and optimizing AOA, and then three aspects in future studying are pointed out.

Partial Nitritation/Anammox and biological phosphorus removal integration in a single bioreactor under mainstream conditions

Anammox-based nitrogen removal and enhanced biological phosphorus removal (EBPR) are increasingly applied for nutrient removal from wastewater, but are typically operated in separate reactors. Here, a novel process for integrated partial nitritation/anammox (PN/A) and EBPR in a single reactor employing integrated fixed film activated sludge was tested. The reactor was fed with mainstream municipal wastewater (5.4 ± 1.3 g COD/g N) at 20 °C for 243 days. Robust ammonium, total inorganic nitrogen, and orthophosphate removal efficiencies of 94 ± 4 %, 87 ± 7 % and 92 ± 7 % were achieved. Nitrite-oxidizing organisms suppression and ammonia-oxidizing organisms retention were achieved via solids retention time control, intermittent aeration, and suspended versus attached biomass population segregation. The contribution of anammox to nitrogen removal increased from 24 % to 74 %. In parallel, a substantial enrichment of Tetrasphaera polyphosphate accumulating organisms was observed. This work demonstrates a novel intensified bioprocess coupling PN/A and EBPR in the same reactor for efficient nutrient removal from wastewater.

Exploration of the metabolic flexibility of glycogen accumulating organisms through metatranscriptome analysis and metabolic characterization

Glycogen accumulating organisms (GAOs) are closely related to the deterioration of enhanced biological phosphorus removal systems. However, the metabolic mechanisms that drive GAOs remain unclear. Here, the two-thirds supernatant of a reactor were decanted following the anaerobic period to enrich GAOs. Long-term monitoring demonstrated that the system was stable and exhibited typical characteristics of GAOs metabolism. Acetate was completely consumed after 60 min of the anaerobic phase. The level of glycogen decreased from 0.20 to 0.14 g/gSS during the anaerobic phase, whereas the level of glycogen significantly increased to 0.21g/gSS at the end of the aerobic period. Moreover, there was almost no phosphate release and absorption in the complete periods, thus confirming the successful construction of a GAOs enrichment system. Microbial community analysis demonstrated that Ca. Contendobacter was among the core functional genera and showed the highest activity among all of the communities. Furthermore, our study is the first to identify the involvement of the ethyl-malonyl-CoA pathway in the synthesis of polyhydroxyvalerate via croR, ccr, ecm, mcd, mch and mcl genes. The Embden-Meyerhof-Parnas (EMP) pathway was preferentially used via glgP. Furthermore, the glyoxylate cycle was the main source of ATP under anaerobic conditions, whereas the tricarboxylic acid cycle provided ATP under aerobic conditions. aceA and mdh appeared to be major modulators of the glyoxylate pathway for controlling energy flow. Collectively, our findings not only revealed the crucial metabolic mechanisms in a GAOs enrichment system but also provided insights into the potential application of Ca. Contendobacter for wastewater treatment.

Towards low carbon demand and highly efficient nutrient removal: Establishing denitrifying phosphorus removal in a biofilm-based system

The combined denitrifying phosphorus removal (DPR) and Anammox process is expected to achieve advanced nutrient removal with low carbon consumption. However, exchanging ammonia/nitrate between them is one limitation. This study investigated the feasibility of conducting DPR in a biofilm reactor to solve that problem. After 46-day anaerobic/aerobic operation, high phosphorus removal efficiency (PRE, 83.15 %) was obtained in the activated sludge (AS) and biofilm co-existed system, in which the AS performed better. Phosphate-accumulating organisms might quickly adapt to the anoxic introduced nitrate, but the following aerobic stage ensured a low effluent orthophosphate (<1.03 mg/L). Because of waste sludge discharging and AS transforming to biofilm, the suspended solids dropped below 60 mg/L on Day 100, resulting in PRE decline (17.17 %) and effluent orthophosphate rise (4.23 mg/L). Metagenomes analysis revealed that Pseudomonas and Thiothrix had genes for denitrification and encoding Pit phosphate transporter, and Candidatus_Competibacter was necessary for biofilm formation.

Impact of operational strategies on a sidestream enhanced biological phosphorus removal (S2EBPR) reactor in a carbon limited wastewater plant

Water resource recovery facilities are faced with stringent effluent phosphorus limits to reduce nutrient pollution. Enhanced biological phosphorus removal (EBPR) is the most common biological route to remove phosphorus; however, many facilities struggle to achieve consistent performance due to limited carbon availability in the influent wastewater. A promising process to improve carbon availability is through return activated sludge (RAS) fermentation via sidestream EBPR (S2EBPR). In this study, a full-scale S2EBPR pilot was operated with a sidestream plus carbon configuration (SSRC) at a carbon-limited facility. A model based on the pilot test was developed and calibrated in the SUMO platform and used to explore routes for improving orthophosphate (OP) effluent compliance. Modeling results showed that RAS diversion by itself was not sufficient to drive OP removal to permit limits of 1 mg L^-1, therefore, other strategies were evaluated. Supplemental carbon addition of MicroC® at 1.90 L min^-1 and controlling the phosphorus concentration below 3.5 mgP L^-1 in the primary effluent (PE) proved to be valid supplemental strategies to achieve OP removal below 1 mg L^-1 most of the time. In particular, the proposed supplemental carbon flow rate would result in an improvement of the rbCOD:P ratio from 17:1 to 26:1. The synergistic approach of RAS diversion and supplemental carbon addition increased the polyphosphate accumulating organisms (PAO) population while minimizing the supplemental carbon needed to achieve consistent phosphorus removal. Overall, this pilot and modeling study shows that joint strategies, including RAS diversion, carbon addition and PE control, can be effective to achieve optimal control of OP effluent.

Deciphering the microbial community structures and functions of wastewater treatment at high-altitude area

Introduction: The proper operation of wastewater treatment plants is a key factor in maintaining a stable river and lake environment. Low purification efficiency in winter is a common problem in high-altitude wastewater treatment plants (WWTPs), and analysis of the microbial community involved in the sewage treatment process at high-altitude can provide valuable references for improving this problem. Methods: In this study, the bacterial communities of high- and low-altitude WWTPs were investigated using Illumina high-throughput sequencing (HTS). The interaction between microbial community and environmental variables were explored by co-occurrence correlation network. Results: At genus level, Thauera (5.2%), unclassified_Rhodocyclaceae (3.0%), Dokdonella (2.5%), and Ferribacterium (2.5%) were the dominant genera in high-altitude group. The abundance of nitrogen and phosphorus removal bacteria were higher in high-altitude group (10.2% and 1.3%, respectively) than in low-altitude group (5.4% and 0.6%, respectively). Redundancy analysis (RDA) and co-occurrence network analysis showed that altitude, ultraviolet index (UVI), pH, dissolved oxygen (DO) and total nitrogen (TN) were the dominated environmental factors (p < 0.05) affecting microbial community assembly, and these five variables explained 21.4%, 20.3%, 16.9%, 11.5%, and 8.2% of the bacterial assembly of AS communities. Discussion: The community diversity of high-altitude group was lower than that of low-altitude group, and WWTPs of high-altitude aeras had a unique microbial community structure. Low temperature and strong UVI are pivotal factors contributing to the reduced diversity of activated sludge microbial communities at high-altitudes.

Enhancing resource recovery via cranberry syrup waste at the Wisconsin Rapids WRRF: An experimental and modeling study

The Wisconsin Rapids Wastewater Treatment Plant (WRWWTP) is faced with a more stringent effluent phosphorus requirement that will drive capital investment between 2020 and 2025. The facility will need to achieve a monthly average value of 0.36 mg L^-1 of total phosphorus (TP). While the facility has sufficient influent carbon to drive a conventional enhanced biological phosphorus removal (EBPR) configuration, the existing infrastructure makes the addition of influent selector zones cost prohibitive. Underutilized aeration basin capacity was repurposed for testing return activated sludge (RAS) fermentation. The WRWWTP began pilot testing of RAS fermentation in April 2021. The facility moved through a series of operational setpoints to optimize phosphorus removal in a sidestream RAS (SSR) configuration, including RAS diversion, decrease of DO in aeration basins and chemical dosing shutoff. One of the key implementations was the addition of cranberry syrup waste to provide additional carbon for RAS fermentation, converting the process to a SSR plus carbon (SSRC) configuration. By the end of the testing period, effluent total phosphorus was averaging less than 0.4 mg L^-1 with no chemical addition. A model was developed in the SUMO platform and was used to capture orthophosphate trends during the testing period. The model investigated microbial population dynamics and found that the operational changes including RAS diversion, chemical dosing shutoff and cranberry syrup waste addition impacted the enrichment of phosphorus accumulating organisms (PAO). After performing a sensitivity analysis on hydrolysis parameters, the predicted hydrolysis rate around 1.8-1.9 mg COD g VSS^-1 hr^-1 was found to match the batch rate testing data. This is the first study where cranberry syrup waste was used to successfully enhance EBPR performance, resulting in 90% TP removal. While further research is needed regarding the composition of the waste matrix and the microbial community composition, this expands the routes for resource recovery in the field of wastewater treatment.

A review of adsorption techniques for removal of phosphates from wastewater

Phosphate is considered the main cause of eutrophication and has received considerable attention recently. Several methods have been used for removal of phosphates in water and these include biological treatment, membrane filtration processes, chemical precipitation, and adsorption. Adsorption technology is highly effective in the removal of phosphate from wastewater even at low phosphate concentrations. Nanomaterials/nanoparticles, carbon-based materials (activated carbon and biochar), and their composites have been widely employed for the adsorptive removal and recovery of phosphate from wastewater due to their exceptional properties such as high surface area and high phosphate adsorption properties. This article is a review of the recently reported literature in the field of nanotechnology and activated carbon for the adsorption of phosphate from wastewater. Highlights of the adsorption mechanisms, adsorption behaviour, experimental parameters, effects of co-existing ions, and adsorbent modifications are also discussed.

Comparative analysis of floc characteristics and microbial communities in anoxic and aerobic suspended growth processes

A fully anoxic suspended growth process is an appealing alternative to conventional activated sludge (AS) due to considerable aeration reduction and improved carbon processing efficiency for biological nutrient removal (BNR). With development of the hybrid membrane aerated biofilm reactor (MABR) technology, implementation of a fully anoxic suspended growth community in BNR facilities became practical. To better understand potential limitations with the elimination of aeration, we carried out microscopic examination and 16S rRNA gene-based microbial community profiling to determine how an anoxic suspended growth would differ from the conventional aerobic process in floc characteristics, microbial diversity, microbial temporal dynamics, and community assembly pattern. Fewer filamentous populations were found in the anoxic mixed liquor, suggesting easily sheared flocs. The anoxic microbial community had distinct composition and structure, but its diversity and temporal dynamics were similar to the conventional aerobic community. A variety of well-studied functional guilds were also identified in the anoxic community. The anoxic microbial community assembly was more stochastic than the conventional aerobic community, but deterministic assembly was still significant with a large core microbiome adapted to the anoxic condition. PRACTITIONER POINTS: Flocs developed under the anoxic conditions had less filamentous backbones, implying reduced flocculation capacity and easily sheared flocs. Knowledge about the ecophysiology of Thauera, Thiothrix, and Trichococcus can help achieve good properties of the anoxic flocs. A diverse microbial community sustainably adapted to the fully anoxic condition, containing a variety of filaments, denitrifiers, and PAOs. The anoxic microbial community displayed a similar degree of diversity and temporal dynamics compared to the aerobic counterpart. The anoxic community's assembly was more stochastic, so it may be less subject to changes in environmental variables.

Enhanced Bio-P removal: Past, present, and future - A comprehensive review

Excess amounts of phosphorus (P) and nitrogen (N) from anthropogenic activities such as population growth, municipal and industrial wastewater discharges, agriculture fertilization and storm water runoffs, have affected surface water chemistry, resulting in episodes of eutrophication. Enhanced biological phosphorus removal (EBPR) based treatment processes are an economical and environmentally friendly solution to address the present environmental impacts caused by excess P present in municipal discharges. EBPR practices have been researched and operated for more than five decades worldwide, with promising results in decreasing orthophosphate to acceptable levels. The advent of molecular tools targeting bacterial genomic deoxyribonucleic acid (DNA) has also helped us reveal the identity of potential polyphosphate-accumulating organisms (PAO) and denitrifying PAO (DPAO) responsible for the success of EBPR. Integration of process engineering and environmental microbiology has provided much-needed confidence to the wastewater community for the successful implementation of EBPR practices around the globe. Despite these successes, the process of EBPR continues to evolve in terms of its microbiology and application in light of other biological processes such as anaerobic ammonia oxidation and on-site carbon capture. This review provides an overview of the history of EBPR, discusses different operational parameters critical for the successful operation of EBPR systems, reviews current knowledge of EBPR microbiology, the influence of PAO/DPAO on the disintegration of microbial communities, stoichiometry, EBPR clades, current practices, and upcoming potential innovations.

Consistency between the metabolic performance of two aerobic granular sludge systems and the functional groups of bacteria detected by amplicon sequencing

Two sequential batch reactors (R1 and R2) of aerobic granular sludge (AGS) were inoculated with activated sludge of different origins. The objective was to investigate the granulation and the consistency between the structure of the microbial communities (16S rRNA amplicon sequencing) in each reactor and their metabolic performance (removal of C, N, and P). Both reactors were fed with acetate-based synthetic wastewater, targeting an anaerobic-aerobic cycle reputed to favor the phosphorus- and glycogen-accumulating organisms (PAO and GAO). Stable granulation was achieved in both reactors, where, instead of PAO, the dominant genera were ordinary heterotrophic organisms (OHO) such as Thauera, Paracoccus, and Flavobacterium known for their high capacity of aerobic storage of polyhydroxyalkanoates (PHA). Generally, there was good consistency between the metabolic behavior of each reactor and the bacterial genera detected. Both reactors showed high removals of C and complete nitrification (Nitrosomonas and Nitrospira detected) but a low level of simultaneous nitrification-denitrification (SND) during the aerated phase. The latter causes that nitrates were recycled to the initial phase, in detriment of PAO selection. Meanwhile, the study showed that selecting slow-growing OHOs (with aerobic storage capacity) favors stable granulation, revealing an alternative AGS technology for C and N removal.

Low biological phosphorus removal from effluents treated by slow sand filters

The legislation for environment protection requires strict controls of the wastewater releasing in water bodies. The wastewater treatment plants (WWTP) have been used for organic matter degradation; however, the residual total phosphorus (TP) removal has not been efficient. TP and nitrogen present in wastewater are associated to eutrophication of water bodies and algae growth. Therefore, this study discusses the efficiency of phosphorus removal by a slow filter (SF), complementary to a WWTP and the microbial community involved. The results showed that the use of SF, with or without macrophytes, is not suitable to remove TP. Spatial variation in microbial communities distributed in three distinct zones was identified in the SF. Proteobacteria, Bacteroidetes, Chloroflexi and Firmicutes covered the hydrolytic and fermentative bacteria. The acetogenesis, nitrification, and denitrification, as well as the removal of phosphorus from the effluent, were performed by representatives affiliated to different groups. Alphaproteobacteria, Betaproteobacteria, and Gammaproteobacteria among these, Dokdonella sp., Frateuria sp., Comamonas sp., Diaphorobacter sp., Nitrosospira sp., Ferruginibacter sp., Flavobacterium sp., and the uncultured OD1 were the most abundant bacteria in the SF. The low efficiency for TP removing from SF effluents can be explained by the low abundance of phosphorus accumulating organisms (PAOs), with the association of the low concentration of biodegradable organic matter in the inlet effluent. Therefore, the alternative to using SF as a complement to WWTPs, as recommended by some Brazilian environmental agencies, did not prove to be viable and new approaches must be evaluated. KEY POINTS: • The phosphorus removal was performed by a slow filter system in a WWTP but obtained a low efficiency. • Microbial spatial variation was distributed into distinct zones from slow filter. • Low abundance of PAOs was observed due to the low availability of organic matter.

The phylogeny, ecology and ecophysiology of the glycogen accumulating organism (GAO) Defluviicoccus in wastewater treatment plants

This comprehensive review looks critically what is known about members of the genus Defluviicoccus, an example of a glycogen accumulating organism (GAO), in wastewater treatment plants, but found also in other habitats. It considers the operating conditions thought to affect its performance in activated sludge plants designed to remove phosphorus microbiologically, including the still controversial view that it competes with the polyphosphate accumulating bacterium Ca. Accumulibacter for readily biodegradable substrates in the anaerobic zone receiving the influent raw sewage. It looks at its present phylogeny and what is known about it's physiology and biochemistry under the highly selective conditions of these plants, where the biomass is recycled continuously through alternative anaerobic (feed); aerobic (famine) conditions encountered there. The impact of whole genome sequence data, which have revealed considerable intra- and interclade genotypic diversity, on our understanding of its in situ behaviour is also addressed. Particular attention is paid to the problems in much of the literature data based on clone library and next generation DNA sequencing data, where Defluviicoccus identification is restricted to genus level only. Equally problematic, in many publications no attempt has been made to distinguish between Defluviicoccus and the other known GAO, especially Ca. Competibacter, which, as shown here, has a very different ecophysiology. The impact this has had and continues to have on our understanding of members of this genus is discussed, as is the present controversy over its taxonomy. It also suggests where research should be directed to answer some of the important research questions raised in this review.

Hydrolysis capacity of different sized granules in a full-scale aerobic granular sludge (AGS) reactor

In aerobic granular sludge (AGS) reactors, granules of different sizes coexist in a single reactor. Their differences in settling behaviour cause stratification in the settled granule bed. In combination with substrate concentration gradients over the reactor height during the anaerobic plug-flow feeding regime, this can result in functional differences between granule sizes. In this study, we compared the hydrolytic activity in granules of 4 size ranges (between 0.5 and 4.8 mm diameter) collected from a full-scale AGS installation. Protease and amylase activities were quantified through fluorescent activity assays. To visualise where the hydrolytic active zones were located within the granules, the hydrolysis sites were visualized microscopically after incubating intact and sliced granules with fluorescent casein and starch. The microbial community was studied using fluorescent in situ hybridization (FISH) and sequencing. The results of these assays indicated that hydrolytic capacity was present throughout the granules, but the hydrolysis of bulk substrates was restricted to the outer 100 µm, approximately. Many of the microorganisms studied by FISH, such as polyphosphate and glycogen accumulating organisms (PAO and GAO), were abundant in the vicinity of the hydrolytically active sites. The biomass-specific hydrolysis rate depended mainly on the available granule surface area, suggesting that different sized granules are not differentiated in terms of hydrolytic capacity. Thus, the substrate concentration gradients that are present during the anaerobic feeding in AGS reactors do not seem to affect hydrolytic activity at the granule surfaces. In this paper, we discuss the possible reasons for this and reflect about the implications for AGS technology.

Phosphorus removal and recovery: state of the science and challenges

Phosphorus is one of the main nutrients required for all life. Phosphorus as phosphate form plays an important role in different cellular processes. Entrance of phosphorus in the environment leads to serious ecological problems including water quality problems and soil pollution. Furthermore, it may cause eutrophication as well as harmful algae blooms (HABs) in aquatic environments. Several physical, chemical, and biological methods have been presented for phosphorus removal and recovery. In this review, there is an overview of phosphorus role in nature provided, available removal processes are discussed, and each of them is explained in detail. Chemical precipitation, ion exchange, membrane separation, and adsorption can be listed as the most used methods. Identifying advantages of these technologies will allow the performance of phosphorus removal systems to be updated, optimized, evaluate the treatment cost and benefits, and support select directions for further action. Two main applications of biochar and nanoscale materials are recommended.

Phosphorus Removal from Aerobic Granular Sludge: Proliferation of Polyphosphate-Accumulating Organisms (PAOs) under Different Feeding Strategies

Aerobic granular sludge (AGS) is known for high phosphorus removal from wastewaters, and phosphorus can be recovered from high phosphorus-containing waste sludge granules. This study aimed at determining the feeding strategy that provides the best performance in terms of the proliferation of polyphosphate-accumulating organisms (PAOs) and phosphorus removal. Using three AGS bioreactors, this study compared phosphorus removal and the proliferation dynamics of PAOs under three different feeding strategies: anaerobic slow feeding (R1), pulse feeding + anaerobic mixing (R2), and pulse feeding (R3). Results indicate that R1 and R2 achieved significantly higher phosphorus removal (97.6 ± 3% for R1 and 98.3 ± 1% for R2) than R3 (55 ± 11%). The anaerobic slow feeding procedure (R1) achieved the highest specific phosphorus release rate (SPRR) and specific phosphorus uptake rate (SPUR) as compared to the other two feeding conditions. 16S ribosomal ribonucleic acid (rRNA) gene sequencing assay of the microbial community for the three feeding strategies indicated that although the feeding strategy impacted reactor performance, it did not significantly alter the microbial community. The bacteria community composition maintained a similar degree of diversity. Proteobacteria, Bacteroidetes, and Verrucomicrobia were the dominant bacterial phyla in the system. Dominant PAOs were from the class Betaproteobacteria and the genera Paracoccus and Thauera. Glycogen-accumulating organisms were significantly inhibited while other less-known bacteria such as Wandonia and Hyphomonas were observed in all three reactors.

Ecosystem-specific microbiota and microbiome databases in the era of big data

The rapid development of sequencing methods over the past decades has accelerated both the potential scope and depth of microbiota and microbiome studies. Recent developments in the field have been marked by an expansion away from purely categorical studies towards a greater investigation of community functionality. As in-depth genomic and environmental coverage is often distributed unequally across major taxa and ecosystems, it can be difficult to identify or substantiate relationships within microbial communities. Generic databases containing datasets from diverse ecosystems have opened a new era of data accessibility despite costs in terms of data quality and heterogeneity. This challenge is readily embodied in the integration of meta-omics data alongside habitat-specific standards which help contextualise datasets both in terms of sample processing and background within the ecosystem. A special case of large genomic repositories, ecosystem-specific databases (ES-DB's), have emerged to consolidate and better standardise sample processing and analysis protocols around individual ecosystems under study, allowing independent studies to produce comparable datasets. Here, we provide a comprehensive review of this emerging tool for microbial community analysis in relation to current trends in the field. We focus on the factors leading to the formation of ES-DB's, their comparison to traditional microbial databases, the potential for ES-DB integration with meta-omics platforms, as well as inherent limitations in the applicability of ES-DB's.

Exploring the microbial influence on seasonal nitrous oxide concentration in a full-scale wastewater treatment plant using metagenome assembled genomes

Nitrous oxide is a highly potent greenhouse gas and one of the main contributors to the greenhouse gas footprint of wastewater treatment plants (WWTP). Although nitrous oxide can be produced by abiotic reactions in these systems, biological N₂O production resulting from the imbalance of nitrous oxide production and reduction by microbial populations is the dominant cause. The microbial populations responsible for the imbalance have not been clearly identified, yet they are likely responsible for strong seasonal nitrous oxide patterns. Here, we examined the seasonal nitrous oxide concentration pattern in Avedøre WWTP alongside abiotic parameters, the microbial community composition based on 16S rRNA gene sequencing and already available metagenome-assembled genomes (MAGs). We found that the WWTP parameters could not explain the observed pattern. While no distinct community changes between periods of high and low dissolved nitrous oxide concentrations were determined, we found 26 and 28 species with positive and negative correlations to the seasonal N₂O concentrations, respectively. MAGs were identified for 124 species (approximately 31% mean relative abundance of the community), and analysis of their genomic nitrogen transformation potential could explain this correlation for four of the negatively correlated species. Other abundant species were also analysed for their nitrogen transformation potential. Interestingly, only one full-denitrifier (Candidatus Dechloromonas phosphorivorans) was identified. 59 species had a nosZ gene predicted, with the majority identified as a clade II nosZ gene, mainly from the phylum Bacteroidota. A correlation of MAG-derived functional guilds with the N₂O concentration pattern showed that there was a small but significant negative correlation with nitrite oxidizing bacteria and species with a nosZ gene (N₂O reducers (DEN)). More research is required, specifically long-term activity measurements in relation to the N₂O concentration to increase the resolution of these findings.

Dynamics of antibiotic resistance genes and microbial community in shortcut nitrification-denitrification process under antibiotic stresses

In this study, the performance of shortcut nitrification-denitrification (SCND) at different TC and SD stress conditions (0 μg/L, 1-97 days; 100 μg/L, 98-138 days; 500 μg/L, 139-175 days) was investigated. Higher level antibiotic stress (500 μg/L) led to the serious deterioration of nitrogen removal, and denitrification was more sensitive to antibiotic stress than nitrification. The dynamics of antibiotic resistance genes (ARGs) and microbial community were revealed by quantitative real-time PCR and 16S rDNA high-throughput sequencing, respectively. Tet-genes (tetA, tetQ, tetW), sul-genes (sulI, sulII), and mobile genetic element (intI1) in activated sludge increased by 1.2 ~ 2.5 logs with long-term exposure of antibiotic stress, and sulI, tetA, tetQ, and tetW were significantly positively correlated with intI1. Long-term antibiotics stress caused the decrease of most denitrifiers, and five genera were identified as the potential host of ARGs. The key impact factors of SCND drove the dynamics of ARGs and microbial community. Except for sulII gene, DO and FA were significantly positively correlated with ARGs, while FNA, NAR, and NO₂^--N showed opposite effects to ARGs. Overall, maintaining relative lower DO, higher FNA, NAR, and NO₂^--N conditions are not only benefit to the stable operation of SCND, but may also conducive to the control of ARG dissemination. This study provides theoretical basis on the control of ARGs in the SCND process.

Recovery of High Quality Metagenome-Assembled Genomes From Full-Scale Activated Sludge Microbial Communities in a Tropical Climate Using Longitudinal Metagenome Sampling

The analysis of metagenome data based on the recovery of draft genomes (so called metagenome-assembled genomes, or MAG) has assumed an increasingly central role in microbiome research in recent years. Microbial communities underpinning the operation of wastewater treatment plants are particularly challenging targets for MAG analysis due to their high ecological complexity, and remain important, albeit understudied, microbial communities that play ssa key role in mediating interactions between human and natural ecosystems. Here we consider strategies for recovery of MAG sequence from time series metagenome surveys of full-scale activated sludge microbial communities. We generate MAG catalogs from this set of data using several different strategies, including the use of multiple individual sample assemblies, two variations on multi-sample co-assembly and a recently published MAG recovery workflow using deep learning. We obtain a total of just under 9,100 draft genomes, which collapse to around 3,100 non-redundant genomic clusters. We examine the strengths and weaknesses of these approaches in relation to MAG yield and quality, showing that co-assembly may offer advantages over single-sample assembly in the case of metagenome data obtained from closely sampled longitudinal study designs. Around 1,000 MAGs were candidates for being considered high quality, based on single-copy marker gene occurrence statistics, however only 58 MAG formally meet the MIMAG criteria for being high quality draft genomes. These findings carry broader broader implications for performing genome-resolved metagenomics on highly complex communities, the design and implementation of genome recoverability strategies, MAG decontamination and the search for better binning methodology.

Intermittent Microaeration Technology to Enhance the Carbon Source Release of Particulate Organic Matter in Domestic Sewage

Domestic sewage treatment plants often have insufficient carbon sources in the influent water. To solve this problem, the commonly used technical means include an additional carbon source, primary sludge fermentation, and excess sludge fermentation, but these methods are uneconomical, unsustainable, and not applicable to small-scale wastewater treatment plants. Intermittent microaeration technology has the advantages of low energy-consumption, ease of application, and low cost, and can effectively promote anaerobic digestion of municipal sludge; however little research has been reported on its use to enhance the carbon sources release of particulate organic matter (POM) from domestic wastewater. Therefore, the effect of intermittent microaeration on the carbon source release of POM was evaluated in this study, with POM as the control test. The results showed that the release concentration of soluble chemical oxygen demand (SCOD) was the highest on day 4 under microaerobic conditions, and the concentrations of SCOD, NH4+-N, and PO43−-P in the liquid phase were 1153, 137.1, and 13 mg/L, respectively. Compared with the control group, the SCOD concentration increased by 34.2%, and the NH4+-N and PO43−-P concentrations decreased by 18.65% and 17.09%, respectively. Intermittent microaeration can effectively promote the growth of Paludibacter, Actinomyces, and Trichococcus hydrolytic fermentation functional bacteria. Their relative abundances increased by 282.83%, 21.77%, and 23.47%, respectively, compared with the control group. It can simultaneously inhibit the growth of acetate-type methanogenic archaea, Methanosaeta and Methanosarcina, with a decrease in relative abundances of 16.81% and 6.63%, respectively. The aforementioned data show that intermittent microaeration can not only promote the hydrolysis of POM, but can also reduce the loss of acetic acid carbon source, which is a cost-effective technical way to enhance the release of a carbon source of particulate organic matter in domestic sewage.

The novel genus, 'Candidatus Phosphoribacter', previously identified as Tetrasphaera, is the dominant polyphosphate accumulating lineage in EBPR wastewater treatment plants worldwide

The bacterial genus Tetrasphaera encompasses abundant polyphosphate accumulating organisms (PAOs) that are responsible for enhanced biological phosphorus removal (EBPR) in wastewater treatment plants. Recent analyses of genomes from pure cultures revealed that 16S rRNA genes cannot resolve the lineage, and that Tetrasphaera spp. are from several different genera within the Dermatophilaceae. Here, we examine 14 recently recovered high-quality metagenome-assembled genomes from wastewater treatment plants containing full-length 16S rRNA genes identified as Tetrasphaera, 11 of which belong to the uncultured Tetrasphaera clade 3. We find that this clade represents two distinct genera, named here Ca. Phosphoribacter and Ca. Lutibacillus, and reveal that the widely used model organism Tetrasphaera elongata is less relevant for physiological predictions of this uncultured group. Ca. Phosphoribacter incorporates species diversity unresolved at the 16S rRNA gene level, with the two most abundant and often co-occurring species encoding identical V1-V3 16S rRNA gene amplicon sequence variants but different metabolic capabilities, and possibly, niches. Both Ca. P. hodrii and Ca. P. baldrii were visualised using fluorescence in situ hybridisation (FISH), and PAO capabilities were confirmed with FISH-Raman microspectroscopy and phosphate cycling experiments. Ca. Phosphoribacter represents the most abundant former Tetrasphaera lineage and PAO in EPBR systems in Denmark and globally.