Biomechanical Strategies Underlying the Robust Body Armour of an Aposematic Weevil

Tanning of the tarsal and mandibular cuticle in adult Anax imperator (Insecta: Odonata) during the emergence sequence

The arthropod cuticle offers strength, protection, and lightweight. Due to its limit in expandability, arthropods have to moult periodically to grow. While moulting is beneficial in terms of parasite or toxin control, growth and adaptation to environmental conditions, it costs energy and leaves the soft animal's body vulnerable to injuries and desiccation directly after ecdysis. To investigate the temporal change in sclerotization and pigmentation during and after ecdysis, we combined macrophotography, confocal laser scanning microscopy, scanning electron microscopy and histological sectioning. We analysed the tarsal and mandibular cuticle of the blue emperor dragonfly to compare the progress of tanning for structures that are functionally involved during emergence (tarsus/tarsal claws) with structures whose functionality is required much later (mandibles). Our results show that: (i) the tanning of the tarsal and mandibular cuticle increases during emergence; (ii) the tarsal cuticle tans faster than the mandibular cuticle; (iii) the mandibles tan faster on the aboral than on the oral side; and (iv) both the exo- and the endocuticle are tanned. The change in the cuticle composition of the tarsal and mandibular cuticle reflects the demand for higher mechanical stability of these body parts when holding on to the substrate during emergence and during first walking or hunting attempts.

Host-Encoded Aminotransferase Import into the Endosymbiotic Bacteria Nardonella of Red Palm Weevil

Symbiotic systems are intimately integrated at multiple levels. Host-endosymbiont metabolic complementarity in amino acid biosynthesis is especially important for sap-feeding insects and their symbionts. In weevil-Nardonella endosymbiosis, the final step reaction of the endosymbiont tyrosine synthesis pathway is complemented by host-encoded aminotransferases. Based on previous results from other insects, we suspected that these aminotransferases were likely transported into the Nardonella cytoplasm to produce tyrosine. Here, we identified five aminotransferase genes in the genome of the red palm weevil. Using quantitative real-time RT-PCR, we confirmed that RfGOT1 and RfGOT2A were specifically expressed in the bacteriome. RNA interference targeting these two aminotransferase genes reduced the tyrosine level in the bacteriome. The immunofluorescence-FISH double labeling localization analysis revealed that RfGOT1 and RfGOT2A were present within the bacteriocyte, where they colocalized with Nardonella cells. Immunogold transmission electron microscopy demonstrated the localization of RfGOT1 and RfGOT2A in the cytosol of Nardonella and the bacteriocyte. Our data revealed that RfGOT1 and RfGOT2A are transported into the Nardonella cytoplasm to collaborate with genes retained in the Nardonella genome in order to synthesize tyrosine. The results of our study will enhance the understanding of the integration of host and endosymbiont metabolism in amino acid biosynthesis.

Strong attachment as an adaptation of flightless weevils on windy oceanic islands

Enhanced attachment ability is common in plants on islands to avoid potential fatal passive dispersal. However, whether island insects also have increased attachment ability remains unclear. Here we measured the attachment of a flightless weevil, Pachyrhynchus sarcitis kotoensis, from tropical islands, and compared it with documented arthropods from the mainland. We examined the morphology and material gradient of its attachment devices to identify the specific adaptive modifications for attachment. We find that the weevil has much stronger attachment force and higher safety factor than previously studied arthropods, regardless of body size and substrate roughness. This probably results from the specific flexible bases of the adhesive setae on the third footpad of the legs. This softer material on the setal base has not been reported hitherto and we suggest that it acts as a flexible hinge to form intimate contact to substrate more effectively. By contrast, no morphological difference in tarsomeres and setae between the weevil and other beetles is observed. Our results show the remarkably strong attachment of an island insect and highlights the potential adaptive benefits of strong attachment in windy island environment. The unique soft bases of the adhesive hairs may inspire the development of strong biomimetic adhesives.

The tight attachment achieved by the male discoidal setae is possibly a counter-adaptation to the grease layer on female integument surfaces in green dock beetles

Green dock beetles Gastrophysa viridula exhibit sexual dimorphism in tarsal attachment setae: females have only pointed, lanceolate and spatula-like setae, while males additionally possess discoidal ones. The sexual dimorphism is probably attributed to the necessity of male discoidal setae to adhere to the smooth back of the female during copulation. We aimed to understand its possible mechanism of attachment with G. viridula. Pull-off forces of both females and males were measured on (i) alive females, (ii) dead and dried females, and (iii) resin replicas of fresh females. The attachment ability tended to increase on dead and replicated female surfaces in both sexes, which indicates that the epicuticular grease layer on the integument of alive intact beetles decreases the attachment. This tendency was prominent in females. The present study clearly showed that in G. viridula discoidal setae enable the males to adhere stronger to female surfaces. The divergent performance found between the sexes differing in their setal composition is probably caused by the stiffness difference between the setae types and by the specific shape of the setal tips. A peculiar reproductive biology in G. viridula is probably attributed to this remarkable divergence of labour in their attachment pads between the sexes.

Beetle elytra: evolution, modifications and biological functions

Conversion of forewings into hardened covers, elytra, was a ground-breaking morphological adaptation that has contributed to the extraordinary evolutionary success of beetles. Nevertheless, the knowledge of the functional aspects of these structures is still fragmentary and scattered across a large number of studies. Here, we have synthesized the presently available information on the evolution, development, modifications and biological functions of this crucial evolutionary novelty. The formation of elytra took place in the earliest evolution of Coleoptera, very likely already in the Carboniferous, and was achieved through the gradual process of progressive forewing sclerotization and the formation of inward directed epipleura and a secluded sub-elytral space. In many lineages of modern beetles, the elytra have been distinctly modified. This includes multiple surface modifications, a rigid connection or fusion of the elytra, or partial or complete reduction. Beetle elytra can be involved in a very broad spectrum of functions: mechanical protection of hind wings and body, anti-predator strategies, thermoregulation and water saving, water harvesting, flight, hind wing folding, diving and swimming, self-cleaning and burrow cleaning, phoresy of symbiotic organisms, mating and courtship, and acoustic communication. We postulate that the potential of the elytra to take over multiple tasks has enormously contributed to the unparalleled diversification of beetles.

Arthropod food webs predicted from body size ratios are improved by incorporating prey defensive properties

Trophic interactions are often deduced from body size differences, assuming that predators prefer prey smaller than themselves because larger prey are more difficult to subdue. This has mainly been confirmed in aquatic ecosystems, but rarely in terrestrial ecosystems, especially in arthropods. Our goal was to validate whether body size ratios can predict trophic interactions in a terrestrial, plant-associated arthropod community and whether predator hunting strategy and prey taxonomy could explain additional variation. We conducted feeding trials with arthropods from marram grass in coastal dunes to test whether two individuals, of the same or different species, would predate each other. From the trial results, we constructed one of the most complete, empirically derived food webs for terrestrial arthropods associated with a single plant species. We contrasted this empirical food web with a theoretical web based on body size ratios, activity period, microhabitat, and expert knowledge. In our feeding trials, predator-prey interactions were indeed largely size-based. Moreover, the theoretical and empirically based food webs converged well for both predator and prey species. However, predator hunting strategy, and especially prey taxonomy improved predictions of predation. Well-defended taxa, such as hard-bodied beetles, were less frequently consumed than expected based on their body size. For instance, a beetle of average size (measuring 4 mm) is 38% less vulnerable than another average arthropod with the same length. Body size ratios predict trophic interactions among plant-associated arthropods fairly well. However, traits such as hunting strategy and anti-predator defences can explain why certain trophic interactions do not adhere to size-based rules. Feeding trials can generate insights into multiple traits underlying real-life trophic interactions among arthropods.

Comparative Material and Mechanical Properties among Cicada Mouthparts: Cuticle Enhanced with Inorganic Elements Facilitates Piercing through Woody Stems for Feeding

Adult cicadas pierce woody stems with their mouthparts to feed on xylem, suggesting the presence of cuticular adaptations that could increase hardness and elastic modulus. We tested the following hypotheses: (a) the mouthpart cuticle includes inorganic elements, which augment the mechanical properties; (b) these elements are abundant in specific mouthpart structures and regions responsible for piercing wood; (c) there are correlations among elements, which could provide insights into patterns of element colocalization. We used scanning electron microscopy (SEM) and energy dispersive X-ray spectroscopy (EDS) to investigate mouthpart morphology and quantify the elemental composition of the cuticle among four cicada species, including periodical cicadas (Magicicada sp.). Nanoindentation was used to quantify hardness and elastic modulus of the mandibles. We found 12 inorganic elements, including colocalized manganese and zinc in the distal regions of the mandible, the structure most responsible for piercing through wood; nanoindentation determined that these regions were also significantly harder and had higher elastic modulus than other regions. Manganese and zinc abundance relates to increased hardness and stiffness as in the cuticle of other invertebrates; however, this is one of the first reports of cuticular metals among insects with piercing-sucking mouthparts (>100,000 described species). The present investigation provides insight into the feeding mechanism of cicadas, an important but understudied component of their life traits.

Exoskeleton ageing and its relation to longevity and fecundity in female Australian leaf insects (

Senescence is a decline in reproduction and survival rate with advancing age resulting from deterioration of somatic tissues and systems throughout the body. Age-related somatic changes (somatic ageing) have been studied extensively in vertebrates but are less well known in other animals, including insects. Since adult insects have very limited ability to repair their exoskeleton, somatic ageing could involve deterioration and discolouration of the cuticle. We investigated age-related changes in wing pigmentation and abdominal cuticle necrosis in females of the Australian leaf insect Phyllium monteithi. Adult females varied markedly in the extent and pattern of pigmentation on their bodies, and we found that pigment spots on the forewings increased in size with age in most individuals. As females aged, most individuals also exhibited increasing levels of abdominal cuticle necrosis, resulting in the loss of abdominal cuticle along the margin of the abdomen. Neither the extent of pigmentation nor cuticle loss were clearly associated with reduced fecundity or longevity in the protected laboratory environment, but it remains unknown whether these age-related changes have functional implications in the wild. Our results show that the P. monteithi exoskeleton undergoes complex changes with age, with potential implications for functional traits and fitness.

Pachyrhynchus Weevils Use 3D Photonic Crystals with Varying Degrees of Order to Create Diverse and Brilliant Displays

The brilliant appearance of Easter Egg weevils, genus Pachyrhynchus (Coleoptera, Curculionidae), originates from complex dielectric nanostructures within their elytral scales and elytra. Previous work, investigating singular members of the Pachyrhynchus showed the presence of either quasi-ordered or ordered 3D photonic crystals based on the single diamond ( Fd3¯m ) symmetry in their scales. However, little is known about the diversity of the structural coloration mechanisms within the family. Here, the optical properties within Pachyrhynchus are investigated by systematically identifying their spectral and structural characteristics. Four principal traits that vary their appearance are identified and the evolutionary history of these traits to identify ecological trends are reconstructed. The results indicate that the coloration mechanisms across the Easter Egg weevils are diverse and highly plastic across closely related species with features appearing at multiple independent times across their phylogeny. This work lays a foundation for a better understanding of the various forms of quasi-ordered and ordered diamond photonic crystal within arthropods.

Material Properties and Morphology of Prestomal Teeth in Relation to the Feeding Habits of Diptera (Brachycera)

Simple Summary

The prestomal teeth are structures on the mouthparts of some fly species that rasp surfaces to expose liquids for ingestion. Here, we investigated the material properties of prestomal teeth, including their hardness, elastic modulus, the extent of sclerotization, and elemental composition, and combined these results with morphology to determine their relationship to fly feeding habits. The results indicated that the prestomal teeth are heavily sclerotized and have hardness and elastic modulus values similar to the polymer polycarbonate. Although the presence of inorganic elements contributes to a harder cuticle in other insect species, the fly species studied here had only low concentrations of inorganic elements. We found evidence that the material properties and morphology of prestomal teeth relate to feeding habits, not phylogeny. In particular, flies that pierce tissues for liquids have larger prestomal teeth relative to their mouthpart sizes when compared to species that generally feed on exposed liquids. Flies are one of the most successful groups of organisms and their success likely relates to their ability to feed on a large array of nutritional liquids. Given their importance in ecology systems and relevance to medical and veterinary entomology, the functional morphology of fly mouthparts warrants additional studies.

Abstract

Prestomal teeth are cuticular projections on the mouthparts of some fly species that rasp surfaces when feeding. Although prestomal teeth morphology has been reported for several fly species, their material properties have not been investigated. Here we report the morphology, elemental composition, extent of sclerotization, hardness, and elastic modulus of prestomal teeth and relate these findings to feeding habits. Scanning electron microscopy revealed that species categorized as flower visitors have a large labellum with numerous pseudotracheae and lack prestomal teeth, generalist species have these same features but with prestomal teeth, and specialist species that feed on blood or other insects have a smaller labellum with few or no pseudotracheae and relatively large prestomal teeth. Confocal microscopy revealed that prestomal teeth are heavily sclerotized and the labellum contains resilin, an elastomeric protein. Hardness and elastic modulus were explored with nanoindentation and showed that the insectivorous Scathophaga stercoraria had the hardest prestomal teeth and the highest modulus. Energy dispersive x-ray spectroscopy revealed that prestomal teeth had low concentrations of inorganic elements, suggesting that hardness might be partially supplemented by inorganic elements. Our findings indicate that prestomal teeth morphology and material properties relate more to feeding habits than to phylogeny.

Nutritional symbionts enhance structural defence against predation and fungal infection in a grain pest beetle

Many insects benefit from bacterial symbionts that provide essential nutrients and thereby extend the hosts' adaptive potential and their ability to cope with challenging environments. However, the implications of nutritional symbioses for the hosts' defence against natural enemies remain largely unstudied. Here, we investigated whether the cuticle-enhancing nutritional symbiosis of the saw-toothed grain beetle Oryzaephilus surinamensis confers protection against predation and fungal infection. We exposed age-defined symbiotic and symbiont-depleted (aposymbiotic) beetles to two antagonists that must actively penetrate the cuticle for a successful attack: wolf spiders (Lycosidae) and the fungal entomopathogen Beauveria bassiana. While young beetles suffered from high predation and fungal infection rates regardless of symbiont presence, symbiotic beetles were able to escape this period of vulnerability and reach high survival probabilities significantly faster than aposymbiotic beetles. To understand the mechanistic basis of these differences, we conducted a time-series analysis of cuticle development in symbiotic and aposymbiotic beetles by measuring cuticular melanisation and thickness. The results reveal that the symbionts accelerate their host's cuticle formation and thereby enable it to quickly reach a cuticle quality threshold that confers structural protection against predation and fungal infection. Considering the widespread occurrence of cuticle enhancement via symbiont-mediated tyrosine supplementation in beetles and other insects, our findings demonstrate how nutritional symbioses can have important ecological implications reaching beyond the immediate nutrient-provisioning benefits.

Mechanical property gradients of taenioglossan radular teeth are associated with specific function and ecological niche in Paludomidae (Gastropoda: Mollusca)

Biological tissues may exhibit graded heterogeneities in structure and mechanical properties that are crucial to their function. One biological structure that shows variation in both structure and function is the molluscan radula: the organ comprises a chitinous membrane with embedded teeth and serves to process and gather food. The tooth morphologies had been well studied in the last decades, but the mechanical properties of the teeth are not known for the vast majority of molluscs. This knowledge gap restricts our understanding of how the radula is able to act effectively on a target surface whilst simultaneously resisting structural failure. Here we employed nanoindentation technique to measure mechanical properties (hardness and Young's modulus) on distinct localities of individual radular teeth from 24 species of African paludomid gastropods. These species have distinct ecological niches as they forage on algae on different feeding substrates. A gradual distribution of measured properties along the teeth was found in species foraging on solid or mixed feeding substrates, but soft substrate feeders exhibit teeth almost homogeneous in their biomechanical properties. The presence or absence of large-scale gradients in these taenioglossan teeth could directly be linked with their specific function and in general with the species ecology, whereas the radular tooth morphologies do not always and fully reflect ecology. STATEMENT OF SIGNIFICANCE: African Lake Tanganyika is well known for harbouring endemic and morphologically distinct genera. Its paludomid gastropods form a flock of high interest because of its diversity. As they show distinct radular tooth morphologies hypotheses about potential trophic specializations had always been at hand. Here we evaluated the mechanical properties Young's modulus and hardness of 9027 individual teeth from 24 species along the tooth by nanoindentation and related them with the gastropods' specific feeding substrate. We find that hard substrate feeders have teeth that are hard at the tips but much less stiff at the base and thus heterogeneous with respect to material properties, whereas soft substrate feeders have teeth that are flexible and homogenous with respect to material properties.

Biomechanical strategies to reach a compromise between stiffness and flexibility in hind femora of desert locusts

Insect cuticle can reach a wide range of material properties, which is thought to be the result of adaptations to applied mechanical stresses. Biomechanical mechanisms behind these property variations remain largely unknown. To fill this gap, here we performed a comprehensive study by simultaneous investigation of the microstructure, sclerotization and the elasticity modulus of the specialized cuticle of the femora of desert locusts. We hypothesized that, considering their different roles in jumping, the femora of fore-, mid- and hind legs should be equipped with cuticles that have different mechanical properties. Surprisingly, our results showed that the hind femur, which typically bears higher stresses, has a lower elasticity modulus than the fore and mid femora in the longitudinal direction. This is likely due to the lower sclerotization and different microstructure of the hind femur cuticle. This allows for some deformability in the femur wall and is likely to reduce the risk of mechanical failure. In contrast to both other femora, the hind femur is also equipped with a set of sclerotized ridges that are likely to provide it with the required stiffness to withstand the mechanical loads during walking and jumping. This paper is one of only a few comprehensive studies on insect cuticle, which advances the current understanding of the relationship between the structure, material property and function in this complex biological composite. STATEMENT OF SIGNIFICANCE: Insect cuticle is a biological composite with strong anisotropy and wide ranges of material properties. Using an example of the femoral cuticle of desert locusts, we measured the elasticity modulus, microstructure and sclerotization level of the cuticle. Our results show that, although the hind femur withstands most of the stress during locomotion, it has a lower elasticity modulus than the fore and mid femora. This is likely to be a functional adaption to jumping, in order to allow small deformations of the femur wall and reduce the risk of material failure. Our results deepen the current understanding of the structure-material-function relationship in the complex insect cuticle.

Ecology of Fear: Spines, Armor and Noxious Chemicals Deter Predators in Cancer and in Nature

In nature, many multicellular and unicellular organisms use constitutive defenses such as armor, spines, and noxious chemicals to keep predators at bay. These defenses render the prey difficult and/or dangerous to subdue and handle, which confers a strong deterrent for predators. The distinct benefit of this mode of defense is that prey can defend in place and continue activities such as foraging even under imminent threat of predation. The same qualitative types of armor-like, spine-like, and noxious defenses have evolved independently and repeatedly in nature, and we present evidence that cancer is no exception. Cancer cells exist in environments inundated with predator-like immune cells, so the ability of cancer cells to defend in place while foraging and proliferating would clearly be advantageous. We argue that these defenses repeatedly evolve in cancers and may be among the most advanced and important adaptations of cancers. By drawing parallels between several taxa exhibiting armor-like, spine-like, and noxious defenses, we present an overview of different ways these defenses can appear and emphasize how phenotypes that appear vastly different can nevertheless have the same essential functions. This cross-taxa comparison reveals how cancer phenotypes can be interpreted as anti-predator defenses, which can facilitate therapy approaches which aim to give the predators (the immune system) the upper hand. This cross-taxa comparison is also informative for evolutionary ecology. Cancer provides an opportunity to observe how prey evolve in the context of a unique predatory threat (the immune system) and varied environments.

Mechanical properties of a female reproductive tract of a beetle and implications for penile penetration

Coevolution of male and female genitalia is widespread in animals. Nevertheless, few studies have examined the mechanics of genital interactions during mating. We characterized the mechanical properties of the elongated female genitalia, the spermathecal duct, of the small cassidine beetle, Cassida rubiginosa. The data were compared with the mechanical properties of the elongated male genitalia, the flagellum. We analysed the material distributions of the spermathecal duct using a microscopy technique, established a tensile test setup under a light microscope and conducted tensile tests. Diameter and tensile stiffness gradients were present along the spermathecal duct, but its Young's modulus and material distribution were more or less homogeneous. The results confirmed the hypothesis based on numerical simulations that the spermathecal duct is more rigid than the flagellum. In the study species, the penile penetration force is simply applied to the base of the hyper-elongated flagellum and conveyed along the flagellum to its tip. Considering this simple penetration mechanism, the relatively low flexibility of the spermathecal duct, compared to the flagellum, is likely to be essential for effective penetration of the flagellum.

Structural analysis across length scales of the scorpion pincer cuticle

Biological structures such as bone, nacre and exoskeletons are organized hierarchically, with the degree of isotropy correlating with the length-scale. In these structures, the basic components are nanofibers or nanoplatelets, which are strong and stiff but anisotropic, whereas at the macrolevel, isotropy is preferred because the direction and magnitude of loads is unpredictable. The structural features and mechanisms, which drive the transition from anisotropy to isotropy across length scales, raise fundamental questions and are therefore the subject of the current study. Focusing on the tibia (fixed finger) of the scorpion pincer, bending tests of cuticle samples confirm the macroscale isotropy of the strength, stiffness, and toughness. Imaging analysis of the cuticle reveals an intricate multilayer laminated structure, with varying chitin-protein fiber orientations, arranged in eight hierarchical levels. We show that the cuticle flexural stiffness is increased by the existence of a thick intermediate layer, not seen before in the claws of crustaceans. Using laminate analysis to model the cuticle structure, we were able to correlate the nanostructure to the macro-mechanical properties, uncovering shear enhancing mechanisms at different length scales. These mechanisms, together with the hierarchical structure, are essential for achieving macro-scale isotropy. Interlaminar failure (ILF) analysis of the cuticle leads to an estimation of the protein matrix shear strength, previously not measured. A similar structural approach can be adopted to the design of future synthetic composites with balanced strength, stiffness, toughness, and isotropy.

Material heterogeneity of male genitalia reduces genital damage in a bushcricket during sperm removal behaviour

Sperm removal behaviour (SRB) is known in many animals, and male genital structures are often involved in the SRB, e.g. rubbing female genitalia vigorously. However, it remains unclear how those male genital structures function properly without severe genital damage during SRB. In the present study, we focused on the bushcricket Metaplastes ornatus and examined the biomechanics of male and female genital structures, involved in their SRB as a model case. During an initial phase of mating, males of this species thrust their subgenital plate with hook-like spurs and many microscopic spines into the female genital chamber. By moving the subgenital plate back-and-forth, males stimulate females, and this stimulation induces the ejection of sperm previously stored in females. We aimed to uncover the mechanics of the interaction between the subgenital plate and genital chamber during SRB. The genital morphology and its material composition were investigated using modern imaging and microscopy techniques. The obtained results showed a pronounced material heterogeneity in the subgenital plate and the genital chamber. The material heterogeneity was completely absent in that of a second bushcricket species, Poecilimon veluchianus, which does not exhibit SRB. Finite element simulations showed that the specific material heterogeneity can redistribute the stress in the subgenital plate of M. ornatus and, thereby, reduces stress concentration during SRB. This may explain why only a few examined males had a broken spur. We suggest that the observed structural features and material heterogeneity in M. ornatus are adaptations to their SRB.

Endosymbiosis morphological reorganization during metamorphosis diverges in weevils

Virtually all animals associate with beneficial symbiotic bacteria. Whether and how these associations are modulated across a host's lifecycle is an important question in disentangling animal-bacteria interactions. We recently reported a case of complete morphological reorganization of symbiosis during metamorphosis of the cereal weevil, Sitophilus oryzae. In this model, the bacteriome, a specialized organ that houses the intracellular bacterium Sodalis pierantonius, undergoes a two-phase remodeling program synchronously driven by host and endosymbiont, resulting in a localization shift and the formation of multiple new bacteriomes. Here, we provide comparative data in a closely-related coleopteran, the red palm weevil Rhynchophorus ferrugineus, which is associated with the ancestral endosymbiont Nardonella. Using cell imaging experiments, we show that the red pal weevil bacteriome remains unchanged during metamorphosis, hence contrasting with what we reported in the cereal weevil S. oryzae. These findings highlight the complexity and divergence of host-symbiont interactions and their intertwining with host development, even in closely-related species. Abbreviations: DAPI: 4',6-diamidino-2-phenylindole; FISH: Fluorescence in situ hybridization; T3SS: Type III secretion system.

Functional significance of graded properties of insect cuticle supported by an evolutionary analysis

The exoskeleton of nearly all insects consists of a flexible core and a stiff shell. The transition between these two is often characterized by a gradual change in the stiffness. However, the functional significance of this stiffness gradient is unknown. Here by combining finite-element analysis and multi-objective optimization, we simulated the mechanical response of about 3000 unique gradients of the elastic modulus to normal contacts. We showed that materials with exponential gradients of the elastic modulus could achieve an optimal balance between the load-bearing capacity and resilience. This is very similar to the elastic modulus gradient observed in insect cuticle and, therefore, suggests cuticle adaptations to applied mechanical stresses; this is likely to facilitate the function of insect cuticle as a protective barrier. Our results further indicate that the relative thickness of compositionally different regions in insect cuticle is similar to the optimal estimation. We expect our findings to inform the design of engineered materials with improved mechanical performance.

Functional diversity and trade-offs in divergent antipredator morphologies in herbivorous insects

Predator-prey interactions may be responsible for enormous morphological diversity in prey species. We performed predation experiments with morphological manipulations (ablation) to investigate the defensive function of dorsal spines and explanate margins in Cassidinae leaf beetles against three types of predators: assassin bugs (stinger), crab spiders (biter), and tree frogs (swallower). There was mixed support for the importance of primary defense mechanisms (i.e., preventing detection or identification). Intact spined prey possessing dorsal spines were more likely to be attacked by assassin bugs and tree frogs, while intact armored prey possessing explanate margins were likely to avoid attack by assassin bugs. In support of the secondary defense mechanisms (i.e., preventing subjugation), dorsal spines had a significant physical defensive function against tree frogs, and explanate margins protected against assassin bugs and crab spiders. Our results suggest a trade-off between primary and secondary defenses. Dorsal spines improved the secondary defense but weakened the primary defense against tree frogs. We also detected a trade-off in which dorsal spines and explanate margins improved secondary defenses against mutually exclusive predator types. Adaptation to different predatory regimes and functional trade-offs may mediate the diversification of external morphological defenses in Cassidinae leaf beetles.

Cuticle sclerotization determines the difference between the elastic moduli of locust tibiae

A striking characteristic of insect cuticle is the wide range of its material property values, with respect to stiffness, strength and toughness. The elastic modulus of cuticle, for instance, ranges over seven orders of magnitude in different structures and different species. Previous studies suggested that this characteristic is influenced by the microstructure and sclerotization of cuticle. However, the relative role of the two factors in determining the material properties of cuticle is unknown. Here we used a combination of scanning electron microscopy (SEM), confocal laser scanning microscopy (CLSM) and nanoindentation, to investigate the effect of microstructure and sclerotization on the elastic modulus of tibiae of desert locusts. Our results showed that tibial cuticle is an anisotropic material with the highest elastic modulus along the tibial axis. This is likely because majority of the fibers in the cuticle are oriented along this axis. We also found that the hind tibia has a significantly higher elastic modulus, compared with the fore and mid tibiae. This is likely due to the higher sclerotization level of the hind tibia cuticle, and seems to be an adaptation to the locust locomotion by jumping, in which axial loads in the hind tibiae may reach several times the insect body weight. Our results suggest that while sclerotization determines the difference between the elastic moduli of the tibiae, anisotropic properties of each tibia is controlled by the specific fiber orientation. Our study provides one of only a few comprehensive investigations on insect cuticle, and helps to better understand the structure-material-function relationship in this complex biological composite. STATEMENT OF SIGNIFICANCE: Insect cuticle is a biological composite with strong anisotropy and wide ranges of material properties. Using an example of the tibial cuticle of desert locusts, we examined the role of two influential factors on the elastic modulus of cuticle: microstructure and sclerotization. Our results suggested the strong influence of sclerotization on the variation of the elastic modulus among fore, mid and hind tibiae, and that of the microstructure on the anisotropy of each tibia. Our results deepens the current understanding of the structure-material-function relationship in complex insect cuticle.

Endocuticle sclerotisation increases the mechanical stability of cuticle

The cuticle plays an important role in the evolutionary success of insects. Many studies on insect cuticles have reported a soft, resilin-rich endocuticle. However, a recent study indicated the presence of a sclerotised endocuticle in the weevil Pachyrhynchus sarcitis kotoensis, which contradicts former knowledge. To understand the degree of sclerotisation in the endocuticle of the weevil and its potential function, we first examined the endocuticle by microscopic and staining techniques. We next performed mechanical tests to measure the material properties of the endocuticle, and numerical simulations to predict the structural effect of the sclerotisation. Our results provide the first evidence of the existence of a sclerotised endocuticle and its remarkable function in improving the mechanical stability of the cuticle. This study highlights the finding of a high degree of sclerotisation in the stiff endocuticle of the weevil, especially the matrix surrounding the fibres. This novel case brings new understanding of cuticle properties and gives promising insights into biomaterial design.

NEXAFS imaging to characterize the physio-chemical composition of cuticle from African Flower Scarab Eudicella gralli

The outermost surface of insect cuticle is a high-performance interface that provides wear protection, hydration, camouflage and sensing. The complex and inhomogeneous structure of insect cuticle imposes stringent requirements on approaches to elucidate its molecular structure and surface chemistry. Therefore, a molecular understanding and possible mimicry of the surface of insect cuticle has been a challenge. Conventional optical and electron microscopies as well as biochemical techniques provide information about morphology and chemistry but lack surface specificity. We here show that a near edge X-ray absorption fine structure microscope at the National Synchrotron Light Source can probe the surface chemistry of the curved and inhomogeneous cuticle of the African flower scarab. The analysis shows the distribution of organic and inorganic surface species while also hinting at the presence of aragonite at the dorsal protrusion region of the Eudicella gralli head, in line with its biological function.

Biology serves as inspiration in materials development; this requires improved understanding of the surface chemistry responsible for processes which are being mimicked. Here, the authors report on the use of near edge X-ray absorption fine structure (NEXAFS) imaging to analyze the surface chemistry of insect cuticle.

Under pressure: force resistance measurements in box mites (Actinotrichida, Oribatida)

Background

Mechanical defenses are very common and diverse in prey species, for example in oribatid mites. Here, the probably most complex form of morphological defense is known as ptychoidy, that enables the animals to completely retract the appendages into a secondary cavity and encapsulate themselves. The two groups of ptychoid mites constituting the Ptyctima, i.e. Euphthiracaroidea and Phthiracaroidea, have a hardened cuticle and are well protected against similar sized predators. Euphthiracaroidea additionally feature predator-repelling secretions. Since both taxa evolved within the glandulate group of Oribatida, the question remains why Phthiracaroidea lost this additional protection. In earlier predation bioassays, chemically disarmed specimens of Euphthiracaroidea were cracked by the staphylinid beetle Othius punctulatus, whereas equally sized specimens of Phthiracaroidea survived. We thus hypothesized that Phthiracaroidea can withstand significantly more force than Euphthiracaroidea and that the specific body form in each group is key in understanding the loss of chemical defense in Phthiracaroidea. To measure force resistance, we adapted the principle of machines applying compressive forces for very small animals and tested the two ptyctimous taxa as well as the soft-bodied mite Archegozetes longisetosus.

Results

Some Phthiracaroidea individuals sustained about 560,000 times their body weight. Their mean resistance was about three times higher, and their mean breaking point in relation to body weight nearly two times higher than Euphthiracaroidea individuals. The breaking point increased with body weight and differed significantly between the two taxa. Across taxa, the absolute force resistance increased sublinearly (with a 0.781 power term) with the animal's body weight. Force resistance of A. longisetosus was inferior in all tests (about half that of Euphthiracaroidea after accounting for body weight). As an important determinant of mechanical resistance in ptychoid mites, the individuals' cuticle thickness increased sublinearly with body diameter and body mass as well and did not differ significantly between the taxa.

Conclusion

We showed the feasibility of the force resistance measurement method, and our results were consistent with the hypothesis that Phthiracaroidea compensated its lack of chemical secretions by a heavier mechanical resistance based on a different body form and associated build-up of hemolymph pressure (defensive trade-off).