Experimental Conditions That Influence the Utility of 2′7′-Dichlorodihydrofluorescein Diacetate (DCFH2-DA) as a Fluorogenic Biosensor for Mitochondrial Redox Status

Platelet Membrane Coated Cu9S8-SNAP for Targeting NIR-II Mild Photothermal Enhanced Chemodynamic/Gas Therapy of Triple-Negative Breast Cancer

Triple-negative breast cancer (TNBC) is a highly aggressive and uncommon subtype of breast cancer with a poor prognosis. It is crucial to prioritise the creation of a nanotherapeutic method that is highly selective and actively targeting TNBC. This study explores a new nanosystem, Cu9S8-SNAP@PM (C-S@P), composed of Cu9S8-SNAP coated with a platelet membrane (PM). The purpose of this nanosystem is to cure TNBC using multimodal therapy. The utilisation of PM-coated nanoparticles (NPs) enables active targeting, leading to the efficient accumulation of C-S@P within the tumour. The Cu9S8 component within these NPs serves the potential to exert photothermal therapy (PTT) and chemodynamic therapy (CDT). Simultaneously, the S-Nitroso-N-Acetylvanicillamine (SNAP) component enables nitric oxide (NO) gas therapy (GT). Furthermore, when exposed to NIR-II laser light, Cu9S8 not only increases the temperature of the tumour area for PTT, but also boosts CDT and stimulates the release of NO through thermal reactions to improve the effectiveness of GT. Both in vitro and in vivo experimental results validate that C-S@P exhibits minimal side effects and represents a multifunctional nano-drug targeted at tumors for efficient treatment. This approach promises significant potential for TNBC therapy and broader applications in oncology.

Dynamic Release from Acetalated Dextran Nanoparticles for Precision Therapy of Inflammation

Polymer-based nanoparticles (NPs) that react to altered physiological characteristics have the potential to enhance the delivery of therapeutics to a specific area. These materials can utilize biochemical triggers, such as low pH, which is prone to happen locally in an inflammatory microenvironment due to increased cellular activity. This reduced pH is neutralized when inflammation subsides. For precise delivery of therapeutics to match this dynamic reaction, drug delivery systems (DDS) need to not only release the drug (ON) but also stop the release (OFF) autonomously. In this study, we use a systematic approach to optimize the composition of acetalated dextran (AcDex) NPs to start (ON) and stop (OFF) releasing model cargo, depending on local pH changes. By mixing ratios of AcDex polymers (mixed NPs), we achieved a highly sensitive material that was able to rapidly release cargo when going from pH 7.4 to pH 6.0. At the same time, the mix also offered a stable composition that enabled a rapid ON/OFF/ON/OFF switching within this narrow pH range in only 90 min. These mixed NPs were also sensitive to biological pH changes, with increased release in the presence of inflammatory cells compared to healthy cells. Such precise and controllable characteristics of a DDS position mixed NPs as a potential treatment platform to inhibit disease flare-ups, reducing both systemic and local side effects to offer a superior treatment option for inflammation compared to conventional systems.

Rapid identification of bacteria by the pattern of redox reactions rate using 2',7'-dichlorodihydrofluorescein diacetate

Bacterial infection is a life-threatening situation, and its rapid diagnosis is essential for treatment. Apart from medical applications, rapid identification of bacteria is vital in the food industry or the public health system. There are various bacterial identification techniques, including molecular-based methods, immunological approaches, and biosensor-based procedures. The most commonly used methods are culture-based methods, which are time-consuming. The objective of this study is to find a fingerprint of bacteria to identify them. Three strains of bacteria were selected, and seven different concentrations of each bacterium were prepared. The bacteria were then treated with two different molar concentrations of the fluorescent fluorophore, dichlorodihydrofluorescein diacetate for 30 minutes. Then, using the fluorescence mode of a multimode reader, the fluorescence emission of each bacterium is scanned twice during 60 minutes. Plotting the difference between two scans versus the bacteria concentration results in a unique fluorescence pattern for each bacterium. Observation of the redox state of bacteria, during 90 minutes, results in a fluorescence pattern that is clearly a fingerprint of different bacteria. This pattern is independent of fluorophore concentration. Mean Squares Errors (MSE) between the fluorescence patterns of similar bacteria is less than that of different bacteria, which shows the method can properly identify the bacteria. In this study, a new label-free method is developed to detect and identify different species of bacteria by measuring the redox activity and using the fluorescence fluorophore, dichlorodihydrofluorescein diacetate. This robust and low-cost method can properly identify the bacteria, uses only one excitation and emission wavelength, and can be simply implemented with current multimode plate readers.

Factors Important in the Use of Fluorescent or Luminescent Probes and Other Chemical Reagents to Measure Oxidative and Radical Stress

Numerous chemical probes have been used to measure or image oxidative, nitrosative and related stress induced by free radicals in biology and biochemistry. In many instances, the chemical pathways involved are reasonably well understood. However, the rate constants for key reactions involved are often not yet characterized, and thus it is difficult to ensure the measurements reflect the flux of oxidant/radical species and are not influenced by competing factors. Key questions frequently unanswered are whether the reagents are used under 'saturating' conditions, how specific probes are for particular radicals or oxidants and the extent of the involvement of competing reactions (e.g., with thiols, ascorbate and other antioxidants). The commonest-used probe for 'reactive oxygen species' in biology actually generates superoxide radicals in producing the measured product in aerobic systems. This review emphasizes the need to understand reaction pathways and in particular to quantify the kinetic parameters of key reactions, as well as measure the intracellular levels and localization of probes, if such reagents are to be used with confidence.

Waste Citrus limon Leaves as Source of Essential Oil Rich in Limonene and Citral: Chemical Characterization, Antimicrobial and Antioxidant Properties, and Effects on Cancer Cell Viability

This study investigated chemical composition, cytotoxicity in normal and cancer cells, and antimicrobial and antioxidant activity of the essential oil (EO) isolated by hydrodistillation from the discarded leaves of lemon (Citrus limon) plants cultivated in Sardinia (Italy). The volatile chemical composition of lemon leaf EO (LLEO) was analyzed with gas chromatography-mass spectrometry combined with flame ionization detection (GC/MS and GC/FID). The most abundant component of LLEO was limonene (260.7 mg/mL), followed by geranial (102.6 mg/mL) and neral (88.3 mg/mL). The antimicrobial activity of LLEO was tested using eight bacterial strains and two types of yeasts by a microdilution broth test. Candida albicans showed the greatest susceptibility (MIC = 0.625 μL/mL) and Listeria monocytogenes and Staphylococcus aureus were inhibited at low LLEO concentration (MIC values from 2.5 to 5 μL/mL). The C. limon leaf EO displayed radical scavenging ability (IC₅₀ value of 10.24 mg/mL) in the 2,2-diphenyl-1-picryl-hydrazylhydrate (DPPH) assay. Furthermore, the LLEO impact on cell viability was explored by 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay in cancer HeLa cells, A375 melanoma cell line, normal fibroblasts (3T3 cells), and keratinocytes (HaCaT cells). LLEO, at 24 h of incubation, significantly reduced viability from 25 μM in Hela cells (33% reduction) and A375 cells (27%), greatly affecting cell morphology, whereas this effect was found from 50 μM on 3T3 fibroblasts and keratinocytes. LLEO's pro-oxidant effect was also established in HeLa cells by 2',7'-dichlorodihydrofluorescein diacetate assay.

Uptake and Effects of Nanoplastics on the Dinoflagellate Gymnodinium corollarium

Plastic nanoparticles (NPs) are the final state of plastic degradation in the environment before they disintegrate into low-molecular-weight organic compounds. Unicellular organisms are highly sensitive to the toxic effects of nanoplastics, because they are often capable of phagotrophy but are unable to consume a foreign material such as synthetic plastic. We studied the effect of polystyrene, poly(vinyl chloride), poly(methyl acrylate), and poly(methyl methacrylate) NPs on the photosynthetic dinoflagellate Gymnodinium corollarium Sundström, Kremp et Daugbjerg. Fluorescent tagged particles were used to visualize plastic capture by dinoflagellate cells. We found that these dinoflagellates are capable of phagotrophic nutrition and thus should be regarded as mixotrophic species. This causes their susceptibility to the toxic effects of plastic NPs. Living cells ingest plastic NPs and accumulate in the cytoplasm as micrometer-level aggregates, probably in food vacuoles. The action of nanoplastics leads to a dose-dependent increase in the level of reactive oxygen species in dinoflagellate cells, indicating plastic degradation in the cells. The introduction of a methyl group into the main chain in the α-position in the case of poly(methyl methacrylate) causes a drastic reduction in toxicity. We expect that such NPs can be a tool for testing unicellular organisms in terms of heterotrophic feeding ability. We suggest a dual role of dinoflagellates in the ecological fate of plastic waste: the involvement of nanoplastics in the food chain and its biochemical destruction. Environ Toxicol Chem 2023;42:1124-1133. © 2023 SETAC.

Protective effect of curcumin on hepatolenticular degeneration through copper excretion and inhibition of ferroptosis

BACKGROUND

Hepatolenticular degeneration (HLD) is an autosomal recessive disorder concerning copper metabolism. Copper overload is also accompanied by iron overload in HLD patients, which can lead to ferroptosis. Curcumin, the active component in turmeric, has the potential to inhibit ferroptosis.

PURPOSE

The current study proposed a systematic investigation of the protective effects of curcumin against HLD and the underlying mechanisms.

METHODS

The protective effect of curcumin on toxic milk (TX) mice was studied. Liver tissue was observed via hematoxylin-eosin (H&E) staining and the ultrastructure of the liver tissue was observed through transmission electron microscopy. Copper levels in the tissues, serum, and metabolites were measured by atomic absorption spectrometry (AAS). In addition, serum and liver indicators were evaluated. In cellular experiments, the effect of curcumin on the viability of rat normal liver cells (BRL-3A) was determined via the 3-[4,5-dimethylthiazol-2-yl)]-2,5-diphenyltetrazolium bromide (MTT) assay. Cell and mitochondrial morphology were observed in curcumin-mediated HLD model cells. The intracellular copper ion fluorescence intensity was observed via fluorescence microscopy, and intracellular copper iron content was detected using AAS. Further, oxidative stress indicators were evaluated. Cellular reactive oxygen species (ROS) and cellular mitochondrial membrane potential were examined via flow cytometry. Furthermore, the expression levels of nuclear factor erythroid-2-related factor 2 (Nrf2), heme oxygenase-1 (HO-1), and glutathione peroxidase 4 (GPX4) were determined via western blotting (WB).

RESULTS

The histopathology of the liver confirmed the hepatoprotective effects of curcumin. Curcumin improved copper metabolism in TX mice. Both serum liver enzyme markers and antioxidant enzyme levels indicated the protective effect of curcumin against HLD-related liver injury. The MTT assay results showed that curcumin was protective against excess copper-induced injury. Curcumin improved the morphology of HLD model cells and their mitochondrial morphology. The Cu²⁺ fluorescent probe and the AAS results indicated that curcumin reduced Cu²⁺ content in HLD hepatocytes. In addition, curcumin improved oxidative stress levels and prevented the decline of mitochondrial membrane potential in HLD model cells. The ferroptosis inducer Erastin reversed these effects of curcumin. WB revealed that curcumin promoted Nrf2, HO-1, and GPX4 protein expression in HLD model cells, and the Nrf2 inhibitor ML385 reversed the effects of curcumin.

CONCLUSION

Curcumin demonstrates a protective role by expelling copper and inhibiting ferroptosis, activating the Nrf2/HO-1/GPX4 signaling pathway in HLD.

Concurrent bioimaging of microalgal photophysiology and oxidative stress

The production of reactive oxygen species (ROS) is an unavoidable consequence of oxygenic photosynthesis and represents a major cause of oxidative stress in phototrophs, having detrimental effects on the photosynthetic apparatus, limiting cell growth, and productivity. Several methods have been developed for the quantification of cellular ROS, however, most are invasive, requiring the destruction of the sample. Here, we present a new methodology that allows the concurrent quantification of ROS and photosynthetic activity, using the fluorochrome dichlorofluorescein (DCF) and in vivo chlorophyll a fluorescence, respectively. Both types of fluorescence were measured using an imaging Pulse Amplitude Modulation (PAM) fluorometer, modified by adding a UVA-excitation light source (385 nm) and a green bandpass emission filter (530 nm) to enable the sequential capture of red chlorophyll fluorescence and green DCF fluorescence in the same sample. The method was established on Phaeodactylum tricornutum Bohlin, an important marine model diatom species, by determining protocol conditions that permitted the detection of ROS without impacting photosynthetic activity. The utility of the method was validated by quantifying the effects of two herbicides (DCMU and methyl viologen) on the photosynthetic activity and ROS production in P. tricornutum and of light acclimation state in Navicula cf. recens Lange-Bertalot, a common benthic diatom. The developed method is rapid and non-destructive, allowing for the high-throughput screening of multiple samples over time.

On the Photo-Eradication of Methicillin-Resistant Staphylococcus aureus Biofilm Using Methylene Blue

This work compared the effectiveness of several Methylene Blue (MB)-based protocols for photo-eradication of biofilms formed on the surface of the glass and stainless steel discs by S. aureus MRSA isolates using a diode laser (λ = 665 nm; output power 40 mW; energy fluence was 189 J cm^-2). The results obtained showed that MB alone, up to a concentration of 62.5 mgL^-1, had limited photo-bactericidal activity. It was possible to enhance the activity of MB using two types of spherical gold nanoparticles of similar sizes, 15 ± 3 nm/20 ± 3 nm, but differing in the method of their synthesis and stabilization. The enhancement of the photodestruction effect was related to the increased production of hydroxyl radicals by the MB+gold nanoparticles mixture, and this mixture showed dark cytotoxicity against the cocci studied. Effective destruction (mortality above 99.9%) of the biofilms formed by MRSA isolates was also possible without the use of gold nanoparticles, but the concentration of MB had to be at least 125 mgL^-1. A highly efficient protocol of photodestruction of biofilms, consisting of triple exposure of biofilms to laser light in the presence of MB alone, combined with the removal of dead bacteria protecting deep layers of pathogens against photosensitization, was also described.