Gold and Silver Nanoparticle-Based Colorimetric Sensors: New Trends and Applications

Silver nanoparticles from orange peel extract: Colorimetric detection of Pb2+ and Cd2+ ions with a chemometric approach

Green silver nanoparticles (AgNPs@OPE) were obtained by using orange (citrus sinensis) peel water extract (OPE) that acts as a reducing and capping agent. This procedure permits the valorisation of waste as orange peel, and lowers the environmental impact of the process, with respect to the conventional synthetic procedure. The OPE extract reduced Ag(I) to Ag(0) in alkaline conditions, and stabilised the produced nanoparticles as a capping agent. The AgNPs@OPE were deeply characterized by UV-Vis spectroscopy, FT-IR, SEM analysis and DLS analysis and successively used as colorimetric sensors for different metals in aqueous solution. The colourimetric assay showed that AgNPs@OPE were able to detect Pb2+ and Cd2+, as demonstrated by the splits of surface plasmon resonance (SPR) band accompanied by the formation of a second new band; these spectral modification resulted in a colour change, from pristine nanoparticles' yellow to brown, due to the aggregation process. For the quantification of each of the two target cations, a calibration was performed by using the univariate linear regression, within the linearity ranges, exploiting the absorbance ratio between the main SPR band and the new band relative to the aggregate formation. Then a multivariate approach was followed to perform both Cd2+ and Pb2+ quantification by means of Partial Least Square regression (PLS) and target cations distinction by Linear Discriminant Analysis (LDA) applied on Principal Components Analysis (PCA) outputs, in both cases using the entire UV-Vis spectra (350-800 nm) as input data. Finally, the ability to quantify and distinguish between Cd2+ and Pb2+ was tested in tap water samples spiked with the two cations in order to confirm the application of the AgNPs@OPE as selective sensor in real samples.

Wound healing effects of biogenic gold nanoparticles synthesized using red wine extracts

Gold nanoparticles (AuNPs) were synthesized using three red wine extracts (RW-Es); by varying temperature, pH, concentrations of RW-Es and gold salt. The RW-AuNPs were characterized by UV-vis, transmission electron microscopy (TEM), dynamic light scattering (DLS), and the Fourier Transform Infra-red Spectroscopy (FT-IR). Their stability was evaluated in water, foetal bovine serum (FBS), phosphate-buffered saline (PBS), and Dulbecco's Modified Eagle Medium (DMEM) by UV-Vis. The effect of the RW-Es and RW-AuNPs on KMST-6 cell cell viability was evaluated by MTT assay; and their wound healing effects were monitored by scratch assay. RW-AuNPs synthesis was observed by colour change, and confirmed by UV-Vis spectrum, with an absorption peak around 550 nm. The hydrodynamic sizes of the RW-AuNPs ranged between 10 and 100 nm. Polyphenols, carboxylic acids, and amino acids are some of functional groups in the RW-Es that were involved in the reduction of RW-AuNPs. The RW-AuNPs were stable in test solutions and showed no cytotoxicity to the KMST-6 cells up to 72 h. AuNPs synthesized from Pinotage and Cabernet Sauvignon enhanced proliferation of KMST-6 cells and showed potential as wound healing agents. Further studies are required to investigate the molecular mechanisms involved in the potential wound-healing effect of the RW-AuNPs.

Visual tracking of real-time freshness of fish using an agar hydrogel colorimetric indicator containing CuNPs/NCQDs

A simple, selective, and affordable dual fluorescence-colorimetric indicator for hydrogen sulfide was developed based on a complex of copper nanoparticles and N-doped carbon quantum dots (CuNPs/NCQDs). Real-time and visual freshness tracking of fish was done using a colorimetric indicator by incorporating CuNPs/NCQDs into agar hydrogel (AH-CuNPs/NCQDs). The fluorescence response of the CuNPs/NCQDs solution is quenched upon exposure to H2S. The field-emission scanning electron microscopy image of the AH-CuNPs/NCQDs film revealed a unified structure. The prepared indicator exhibited a good and irreversible response to H2S, with a LOD of 91.36 and a LOQ of 276.86 μM, based on the localized surface plasmon resonance (LSPR) mechanism. The X-ray photoelectron spectrometer and Fourier transform infrared spectrometer results confirmed the formation of a CuS bond in the colorimetric indicator exposed to fish spoilage. The prepared indicator demonstrated good stability and remained unaffected by pH or other volatile compounds. Notably, there was a strong correlation between ΔΕ and fish freshness parameters (pH, TV-BN, and TVC). Light green, pale yellow, and dark yellow colors, respectively, indicated freshness, semi-freshness, and spoilage of fish during storage in the refrigerator. Overall, the prepared indicator can be effectively used for detecting spoilage in meat products as a highly sensitive freshness indicator.

Gold nanostructures on polyelectrolyte-brush-modified cellulose membranes as a synergistic platform for uric acid detection

In this study, we present a convenient approach utilizing gold nanostructures coated cellulose membrane for the quantification of uric acid in an aqueous solution. The synthesis of system was achieved by functionalizing cellulose membrane with poly[2-(methacryloyloxy)ethyl]trimethylammonium chloride (PMETAC) and cross-linked with ethylene glycol dimethacrylate (EGDMA). FT-IR and XPS confirm the formation of PMETAC and PMETAC/EGDMA on the cellulose. The fabricated substrates were exposed to tetrachloroaurate solution, then reduced by NaBH4. We have systematically investigated the catalytic oxidation of 3,3',5,5'-tetramethylbenzidine (TMB) by hydrogen peroxide (H2O2) in various pH conditions, absent uric acid, using the fabricated substrates. The colorimetric response-observed through UV-Vis spectroscopy-revealed significant shifts in absorbance at 660 nm, correlating with uric acid concentrations across a range of pH levels. The films exhibited a pronounced color change from green to light yellow in basic to neutral environments and from yellow to dark green under more acidic conditions, demonstrating their potential for high-sensitivity uric acid detection. The assessment of the catalytic films' reusability and stability revealed insights into their enduring performance, identifying opportunities for enhancing material design and functionality for extended applications. This study not only underscores the films' versatile detection capabilities but also emphasizes the importance of pH in tuning the assay's sensitivity and specificity.

Biomaterials for reliable wearable health monitoring: Applications in skin and eye integration

Recent advancements in biomaterials have significantly impacted wearable health monitoring, creating opportunities for personalized and non-invasive health assessments. These developments address the growing demand for customized healthcare solutions. Durability is a critical factor for biomaterials in wearable applications, as they must withstand diverse wearing conditions effectively. Therefore, there is a heightened focus on developing biomaterials that maintain robust and stable functionalities, essential for advancing wearable sensing technologies. This review examines the biomaterials used in wearable sensors, specifically those interfaced with human skin and eyes, highlighting essential strategies for achieving long-lasting and stable performance. We specifically discuss three main categories of biomaterials-hydrogels, fibers, and hybrid materials-each offering distinct properties ideal for use in durable wearable health monitoring systems. Moreover, we delve into the latest advancements in biomaterial-based sensors, which hold the potential to facilitate early disease detection, preventative interventions, and tailored healthcare approaches. We also address ongoing challenges and suggest future directions for research on material-based wearable sensors to encourage continuous innovation in this dynamic field.

Safeguarding Public Health: Advanced Detection of Food Adulteration Using Nanoparticle-Based Sensors

Food adulteration, whether intentional or accidental, poses a significant public health risk. Traditional detection methods often lack the precision required to detect subtle adulterants that can be harmful. Although chromatographic and spectrometric techniques are effective, their high cost and complexity have limited their widespread use. To explore and validate the application of nanoparticle-based sensors for enhancing the detection of food adulteration, focusing on their specificity, sensitivity, and practical utility in the development of resilient food safety systems. This study integrates forensic principles with advanced nanomaterials to create a robust detection framework. Techniques include the development of nanoparticle-based assays designed to improve the detection specificity and sensitivity. In addition, sensor-based technologies, including electronic noses and tongues, have been assessed for their capacity to mimic and enhance human sensory detection, offering objective and reliable results. The use of nanomaterials, including functionalized nanoparticles, has significantly improved the detection of trace amounts of adulterants. Nanoparticle-based sensors demonstrate superior performance in terms of speed, sensitivity, and selectivity compared with traditional methods. Moreover, the integration of these sensors into food safety protocols shows promise for real-time and onsite detection of adulteration. Nanoparticle-based sensors represent a cutting-edge approach for detecting food adulteration, and offer enhanced sensitivity, specificity, and scalability. By integrating forensic principles and nanotechnology, this framework advances the development of more resilient food-safety systems. Future research should focus on optimizing these technologies for widespread application and adapting them to address emerging adulteration threats.

Pyridine-Bridged Covalent Organic Frameworks with Adjustable Band Gaps as Intelligent Artificial Enzymes for Light-Augmented Biocatalytic Sensing

One of the biggest challenges in biotechnology and medical diagnostics is finding extremely sensitive and adaptable biosensors. Since metal-based enzyme-mimetic biocatalysts may lead to biosafety concerns on accumulative toxicity, it is essential to synthesize metal-free enzyme-mimics with optimal biocatalytic activity and superior selectivity. Here, the pyridine-bridged covalent organic frameworks (COFs) with specific oxidase-like (OXD-like) activities as intelligent artificial enzymes for light-augmented biocatalytic sensing of biomarkers are disclosed. Because of the adjustable bandgaps of pyridine structures on the photocatalytic properties of the pristine COF structures, the pyridine-bridged COF exhibit efficient, selective, and light-responsive OXD-like biocatalytic activity. Moreover, the pyridine-bridged COF structures show tunable and light-augmented biocatalytic detection capabilities, which outperform the recently reported state-of-the-art OXD-mimics regarding biosensing efficiency. Notably, the pyridine-bridged COF exhibits efficient and multifaceted diagnostic activity, including the extremely low limit of detection (LOD), which enables visual assays for abundant reducibility biomarkers. It is believed that this design will offer unique metal-free biocatalysts for high-sensitive and low-cost colorimetric detection and also provide new insights to create highly efficient enzyme-like COF materials via linkage-modulation strategies for future biocatalytic applications.

One-Pot Interference-Based Colorimetric Detection of Melamine in Raw Milk via Green Tea-Modified Silver Nanostructures

Detection of melamine has proven to be a challenge, requiring the use of complex analytical techniques. This study introduces an innovative, straightforward one-pot technique for qualitative assessment of the milk adulterant melamine. Originally, silver nanoparticles (AgNPs) were synthesized by utilizing green tea extract, which acted as both a reducing and sensing element. The synthesized AgNPs were characterized using UV-vis spectroscopy, X-ray diffraction, zeta potential, transmission electron microscopy, field emission scanning electron microscopy, and Fourier transform infrared spectroscopy. Melamine, rich in -NH2 groups, interacts with the biopolyphenols of green tea extract through hydrogen bonding. This interaction inhibits the formation of nanoparticles, resulting in a noticeable colorimetric response. The data obtained were confirmed by a standard UV-vis spectrophotometer and validated by the high-performance liquid chromatography technique. The limit of detection achieved by this scheme was quite low, falling below the permissible levels recommended by government bodies, e.g., the Food Safety and Standards Authority of India (FSSAI).

Colorimetric discrimination and spectroscopic detection of tyrosine enantiomers based on melamine induced aggregation of l-cysteine/Au nanoparticles

Au nanoparticles (AuNPs) are decorated by l-cysteine (L-Cys), and the resultant chiral L-Cys/AuNPs can be used for colorimetric discrimination and spectroscopic detection of the tyrosine (Tyr) enantiomers. Melamine (Mel) can induce the aggregation of the L-Cys/AuNPs through ligand exchange, leading to a distinct color change from wine red to purple. Owing to the same rotatory direction of L-Cys/AuNPs and L-Tyr, the L-Cys/AuNPs exhibit a significantly higher binding affinity toward L-Tyr than D-Tyr, and thus the Mel induced aggregation of the L-Cys/AuNPs is greatly alleviated by the protection from the L-Tyr protective layer. Therefore, the Tyr enantiomers can be simply discriminated by naked eyes. In addition, the absorbance of the aggregated L-Cys/AuNPs at ∼630 nm increases linearly with decreasing concentrations of L-Tyr ranging from 10 nM to 1 mM due to the weakened protection effect from L-Tyr, and thus spectroscopic detection of L-Tyr can also be accomplished by the developed L-Cys/AuNPs with a limit of detection (LOD) of 5.3 nM.

Facile Synthesis of PEGylated Gold Nanoparticles for Enhanced Colorimetric Detection of Histamine

Histamine is among the biogenic amines that are formed during the microbial decarboxylation of amino acids in various food products, posing a significant threat to both food safety and human health. Herein, we present a one-step synthesis of PEGylated gold nanoparticles (PEG-AuNPs) for rapid, simple, and cost-effective colorimetric histamine detection. PEG-AuNPs' surface plasmon resonance (SPR) range at 520-530 nm with a hydrodynamic size distribution of 20-40 nm. Fourier transform infrared (FT-IR) spectra confirmed the reduction of AuNPs at 1645 cm-1 along with the other observed peaks at 2870, 1350, and 1100 cm-1 as a strong evidence for the presence of PEG. Upon the addition of histamine to the PEG-AuNP solution, transmission electron microscopy (TEM) highlighted the aggregation of nanoparticles. In addition, red shifting and a decrease in the absorbance of the SPR peak along with the appearance of an additional peak at ∼690 nm was observed in the PEG-AuNP absorption spectra in the presence of histamine. Increasing the PEG concentration in the gold colloids leads to the formation of a protective barrier around the surface of nanoparticles, which influences the colloidal stability by impeding the aggregation of PEG-AuNPs upon histamine addition. The minimum colorimetric response of PEG-AuNPs to histamine concentration is 30 ppm, as assessed by the naked eye. The absorption ratio (A690/A526) showed a linear dynamic range from 20 to 100 ppm with a limit of detection of 9.357 μM. Additionally, the assay demonstrates a commendable selectivity toward histamine analyte.

Picomolar level sensorial dual colorimetric gold nanoparticle sensor for Zn2+ and Hg2+ ions synthesized from bark extract of Lannea Grandis Coromandelica and its wide range applications in real sample analysis

In this work a facile, rapid, reproducible and non-toxic approach has been demonstrated for synthesis of most stable AuNPs from bark extract of Lannea Grandis Coromandelica. UV-Visible spectroscopy, FTIR, TEM, SAED, EDX, XRD, DLS, Zeta Potential, FE-SEM, AFM and XPS techniques were employed for the characterization of synthesized LGC-AuNPs. The UV-Vis spectra of LGC-AuNPs gave SPR peak at 536 nm while the TEM analysis revealed LGC-AuNPs have 20.75 nm size with spherical in shape. DLS study showed the AuNPs have average diameter 50.18 nm. The synthesized AuNPs exhibited very high selectivity, rapid response in recognition towards Zn2+ and Hg2+ ions by changing its color within 20 sec. This proposed sensor can detect very low picomolar level of Zn2+ and Hg2+ ions (LOD value for Zn2+ and Hg2+ were found 1.36 pM and 24.60 pM respectively). Here we also studied effect of several factors such as variation of conc of gold, temperature, incubation time, pH, salt, solvent (polar protic and polar aprotic) to know in which condition AuNPs have high stability and sensitivity. The data revealed that synthesized AuNPs was stable up to two years at pH 6.5 at room temperature in water media and under this condition, it shows maximum sensitivity and reactivity. Moreover, here interference study was carried out to identify high selectivity of synthesized LGC-AuNPs probe in presence of different metal ions. The real sample analyses also revealed the great applicability of this probe. Therefore, this simple, rapid, low-cost, sensing activity appeared to hold great sensibleness for detection of heavy metal ions in real sample.

Progress in environmental monitoring and mitigation strategies for herbicides and insecticides: A comprehensive review

Herbicides and insecticides are pervasively applied in agricultural sector to increase the yield by controlling or eliminating bug vermin and weeds. Although, resistance development occurs, direct and indirect impact on human health and ecosystem is clearly visible. Normally, herbicides and pesticides are water soluble in nature; accordingly, it is hard to decrease their deadliness and to dis-appear them from the environment. They are profoundly specific, and considered as poisonous to various peoples in agricultural and industrial work places. In order to substantially reduce the harmful impacts, it is crucial to thoroughly examine the detection and mitigation measures for these compounds. The primary objective of this paper is to provide an overview of various herbicide and pesticide detection techniques and associated remedial techniques. A short summary on occurrence and harmful effects of herbicides/insecticides on ecosystem has been included to the study. The conventional and advanced, rapid techniques for the detection of insecticides and herbicides were described in detail. A detailed overview on several mitigation strategies including advanced oxidation, adsorption, electrochemical process, and bioremediation as well as the mechanism behind the strategic approaches to reduce the effects of growing pesticide pollution has been emphasized. Regardless of the detection techniques and mitigation strategies, the recent advances employed, obstacles, and perspectives have been discussed in detail.

UiO-66-NH2 Metal-Organic Framework for the Detection of Alzheimer's Biomarker Aβ (1-42)

Neurodegenerative disorders pose a significant challenge to global healthcare, with Alzheimer's disease (AD) being one of the most prevalent forms. Early and accurate detection of amyloid-β (Aβ) (1-42) monomers, a key biomarker of AD pathology, is crucial for effective diagnosis and intervention of the disease. Current gold standard detection techniques for Aβ include enzyme-linked immunosorbent assay and surface plasmon resonance. Although reliable, they are limited by their cost and time-consuming nature, thus restricting their point-of-care applicability. Here we present a sensitive and rapid colorimetric sensor for the detection of Aβ (1-42) monomers within 5 min. This was achieved by harnessing the peroxidase-like activity of metal-loaded metal-organic frameworks (MOFs), specifically UiO-66-NH2, coupled with the strong affinity of Aβ (1-42) to the MOFs. Various metal-loaded MOFs were synthesized and investigated, and platinum-loaded UiO-66-NH2 was identified as the optimal candidate for our purpose. The Pt-loaded UiO-66-NH2 sensor demonstrated detection limits of 2.76 and 4.65 nM Aβ (1-42) monomers in water and cerebrospinal fluid, respectively, with a linear range from 0.75 to 25 nM (R2 = 0.9712), outperforming traditional detection techniques in terms of both detection time and complexity. Moreover, the assay was specific toward Aβ (1-42) monomers when evaluated against interfering compounds. The rapid and cost-effective sensor may help circumvent the limitations of conventional detection methods, thus providing a promising avenue for early AD diagnosis and facilitating improved clinical outcomes.

Green synthesis of silver nanoparticles and its environmental sensor ability to some heavy metals

This study marks a pioneering effort in utilizing Vachellia tortilis subsp. raddiana (Savi) Kyal. & Boatwr., (commonly known as acacia raddiana) leaves as both a reducing and stabilizing agent in the green "eco-friendly" synthesis of silver nanoparticles (AgNPs). The research aimed to optimize the AgNPs synthesis process by investigating the influence of pH, temperature, extract volume, and contact time on both the reaction rate and the resulting AgNPs' morphology as well as discuss the potential of AgNPs in detecting some heavy metals. Various characterization methods, such as UV-vis spectroscopy, X-ray diffraction (XRD), scanning electron microscopy (SEM), infrared spectroscopy (IR), Zeta sizer, EDAX, and transmitting electron microscopy (TEM), were used to thoroughly analyze the properties of the synthesized AgNPs. The XRD results verified the successful production of AgNPs with a crystallite size between 20 to 30 nm. SEM and TEM analyses revealed that the AgNPs are primarily spherical and rod-shaped, with sizes ranging from 8 to 41 nm. Significantly, the synthesis rate of AgNPs was notably higher in basic conditions (pH 10) at 70 °C. These results underscore the effectiveness of acacia raddiana as a source for sustainable AgNPs synthesis. The study also examined the AgNPs' ability to detect various heavy metal ions colorimetrically, including Hg2+, Cu2+, Pb2+, and Co2+. UV-Vis spectroscopy proved useful for this purpose. The color of AgNPs shifts from brownish-yellow to pale yellow, colorless, pale red, and reddish yellow when detecting Cu2+, Hg2+, Co2+, and Pb2+ ions, respectively. This change results in an alteration of the AgNPs' absorbance band, vanishing with Hg2+ and shifting from 423 to 352 nm, 438 nm, and 429 nm for Cu2+, Co2+, and Pb2+ ions, respectively. The AgNPs showed high sensitivity, with detection limits of 1.322 × 10-5 M, 1.37 × 10-7 M, 1.63 × 10-5 M, and 1.34 × 10-4 M for Hg2+, Cu2+, Pb2+, and Co2+, respectively. This study highlights the potential of using acacia raddiana for the eco-friendly synthesis of AgNPs and their effectiveness as environmental sensors for heavy metals, showcasing strong capabilities in colorimetric detection.

Applications of Gas Sensing in Food Quality Detection: A Review

Food products often face the risk of spoilage during processing, storage, and transportation, necessitating the use of rapid and effective technologies for quality assessment. In recent years, gas sensors have gained prominence for their ability to swiftly and sensitively detect gases, making them valuable tools for food quality evaluation. The various gas sensor types, such as metal oxide (MOX), metal oxide semiconductor (MOS) gas sensors, surface acoustic wave (SAW) sensors, colorimetric sensors, and electrochemical sensors, each offer distinct advantages. They hold significant potential for practical applications in food quality monitoring. This review comprehensively covers the progress in gas sensor technology for food quality assessment, outlining their advantages, features, and principles. It also summarizes their applications in detecting volatile gases during the deterioration of aquatic products, meat products, fruit, and vegetables over the past decade. Furthermore, the integration of data analytics and artificial intelligence into gas sensor arrays is discussed, enhancing their adaptability and reliability in diverse food environments and improving food quality assessment efficiency. In conclusion, this paper addresses the multifaceted challenges faced by rapid gas sensor-based food quality detection technologies and suggests potential interdisciplinary solutions and directions.

Development of Novel Peptide-Modified Silver Nanoparticle-Based Rapid Biosensors for Detecting Aminoglycoside Antibiotics

The detection and monitoring of aminoglycoside antibiotics (AGAs) have become of utmost importance due to their widespread use in human and animal therapy, as well as the associated risks of exposure, toxicity, and the emergence of antimicrobial resistance. In this study, we successfully synthesized casein hydrolysate peptides-functionalized silver nanoparticles (CHPs@AgNPs) and employed them as a novel colorimetric analytical platform to demonstrate remarkable specificity and sensitivity toward AGAs. The colorimetric and spectral response of the CHPs@AgNPs was observed at 405 and 520 nm, showing a linear correlation with the concentration of streptomycin, a representative AGA. The color changes from yellow to orange provided a visual indication of the analyte concentration, enabling quantitative determination for real-world samples. The AgNP assay exhibited excellent sensitivity with dynamic ranges of approximately 200-650 and 100-700 nM for streptomycin-spiked tap water and dairy whey with limits of detection found to be ∼98 and 56 nM, respectively. The mechanism behind the selective aggregation of CHPs@AgNPs in the presence of AGAs involves the amine groups of the target analytes acting as molecular bridges for electrostatic coupling with hydroxyl or carboxyl functionalities of adjacent NPs, driving the formation of stable NP aggregates. The developed assay offers several advantages, making it suitable for various practical applications. It is characterized by its simplicity, rapidity, specificity, sensitivity, and cost-effectiveness. These unique features make the method a promising tool for monitoring water quality, ensuring food safety, and dealing with emergent issues of antibiotic resistance.

Application of Localized Surface Plasmon Resonance of Conjugated Gold Nanoparticles in Spectral Diagnosis of SARS-CoV-2: A Numerical Study

Severe respiratory syndrome COVID-19 (SARS-CoV-2) outbreak has became the most important global health issue, and simultaneous efforts to fast and low-cost diagnosis of this virus were performed by researchers. One of the most usual tests was colorimetric methods based on the change of color of gold nanoparticles in the presence of viral antibodies, antigens, and other biological agents. This spectral change can be due to the aggregation of the particles or the shift of localized surface plasmon resonance due to the electrical interactions of surface agents. It is known that surface agents could easily shift the absorption peak of metallic nanocolloids which is attributed to the localized surface plasmon resonance. Experimental diagnosis assays for colorimetric detection of SARS-CoV-2 using Au NPs were reviewed, and the shift of absorption peak was studied from the viewpoint of numerical analysis. Using the numerical method, the refractive index and real and imaginary parts of the effective relative permittivity of the viral biological shell around Au NPs were obtained. This model gives a quantitative description of colorimetric assays of the detection of SARS-CoV-2 using Au NPs.

Challenges in Direct Detection of Flaviviruses: A Review

Arthropods transmit arboviruses via mosquito and tick bites to humans and other animals. The genus flavivirus, which causes diseases, sequelae, and thousands of deaths, mainly in developing and underdeveloped countries, is among the arboviruses of interest to public health. Given the importance of early and accurate diagnosis, this review analyzes the methods of direct detection of flaviviruses, such as reverse transcription loop-mediated isothermal amplification, microfluidics, localized surface plasmon resonance, and surface-enhanced Raman scattering, and presents the advantages, disadvantages, and detection limits identified in studies reported in the literature for each methodology. Among the different methods available, it is essential to balance four fundamental indicators to determine the ideal test: good sensitivity, high specificity, low false positive rate, and rapid results. Among the methods analyzed, reverse transcription loop-mediated isothermal amplification stands out, owing to result availability within a few minutes, with good sensitivity and specificity; in addition, it is the best-characterized methodology.

Simple Method for Optical Detection and Characterization of Surface Agents on Conjugated Gold Nanoparticles

In this article, we propose a simple method to calculate electrical permittivity and refractive index of surface agents of gold nanoparticles (Au NPs), in which it is possible to find the refractive index of surface agents shell by using the absorption peak of the gold nano-colloid. One of the usual tests for detection of surface agents is colorimetric methods based on the change of color of Au NPs. The color change is mainly due to the shift of localized surface plasmon resonance which is related to electrical interactions of surface agents. Although there are many mathematical models for simulating the absorption spectrum and calculating the plasmonic peak, using them is not simple and possible for everyone due to the need for programming. Here, the necessary simulations have been performed for different values ​​of refractive index of surface agents and particle size, and absorption peaks have been obtained. Using numerical methods, a simple formula is obtained between the wavelength of plasmonic peak, the ratio of hydrodynamic diameter to Feret size of the particles, and the refractive index of the surface agents. This method can help researchers to obtain the refractive index and consequently the type or concentration of surface agents around Au NPs without the need for programming or complex mathematical operations. It can also open new horizons in analyzing colorimetric diagnosis of biological agents such as viral antibodies, antigens, and other biological agents.

Biosynthesis of Gold and Silver Nanoparticles Using Phytochemical Compounds

Gold and silver nanoparticles are nanoparticles that have been widely used in various fields and have shown good benefits. The method of nanoparticle biosynthesis utilizing plant extracts, also known as green synthesis, has become a promising method considering the advantages it has compared to other synthesis methods. This review aims to give an overview of the phytochemical compounds in plants used in the synthesis of gold and silver nanoparticles, the nanoparticle properties produced using plant extracts based on the concentration and structure of phytochemical compounds, and their applications. Phytochemical compounds play an important role as reducing agents and stabilizers in the stages of the synthesis of nanoparticles. Polyphenol compounds, reducing sugars, and proteins are the main phytochemical compounds that are responsible for the synthesis of gold and silver nanoparticles. The concentration of phytochemical compounds affects the physical properties, stability, and activity of nanoparticles. This is important to know to be able to overcome limitations in controlling the physical properties of the nanoparticles produced. Based on structure, the phytochemical compounds that have ortho-substituted hydroxyl result in a smaller size and well-defined shape, which can lead to greater activity and stability. Furthermore, the optimal condition of the biosynthesis process is required to gain a successful reaction that includes setting the metal ion concentration, temperature, reaction time, and pH.

The Role of Silver Nanoparticles in Electrochemical Sensors for Aquatic Environmental Analysis

With rapidly increasing environmental pollution, there is an urgent need for the development of fast, low-cost, and effective sensing devices for the detection of various organic and inorganic substances. Silver nanoparticles (AgNPs) are well known for their superior optoelectronic and physicochemical properties, and have, therefore, attracted a great deal of interest in the sensor arena. The introduction of AgNPs onto the surface of two-dimensional (2D) structures, incorporation into conductive polymers, or within three-dimensional (3D) nanohybrid architectures is a common strategy to fabricate novel platforms with improved chemical and physical properties for analyte sensing. In the first section of this review, the main wet chemical reduction approaches for the successful synthesis of functional AgNPs for electrochemical sensing applications are discussed. Then, a brief section on the sensing principles of voltammetric and amperometric sensors is given. The current utilization of silver nanoparticles and silver-based composite nanomaterials for the fabrication of voltammetric and amperometric sensors as novel platforms for the detection of environmental pollutants in water matrices is summarized. Finally, the current challenges and future directions for the nanosilver-based electrochemical sensing of environmental pollutants are outlined.

Colorimetric Sensors for Chemical and Biological Sensing Applications

Colorimetric sensors have been widely used to detect numerous analytes due to their cost-effectiveness, high sensitivity and specificity, and clear visibility, even with the naked eye. In recent years, the emergence of advanced nanomaterials has greatly improved the development of colorimetric sensors. This review focuses on the recent (from the years 2015 to 2022) advances in the design, fabrication, and applications of colorimetric sensors. First, the classification and sensing mechanisms of colorimetric sensors are briefly described, and the design of colorimetric sensors based on several typical nanomaterials, including graphene and its derivatives, metal and metal oxide nanoparticles, DNA nanomaterials, quantum dots, and some other materials are discussed. Then the applications, especially for the detection of metallic and non-metallic ions, proteins, small molecules, gas, virus and bacteria, and DNA/RNA are summarized. Finally, the remaining challenges and future trends in the development of colorimetric sensors are also discussed.

Advanced Plasmonic Nanoparticle-Based Techniques for the Prevention, Detection, and Treatment of Current COVID-19

Coronavirus is an ongoing global pandemic caused by severe acute respiratory syndrome coronavirus 2. Coronavirus disease 2019 known as COVID-19 is the worst pandemic since World War II. The outbreak of COVID-19 had a significant repercussion on the health, economy, politics, and environment, making coronavirus-related issues more complicated and becoming one of the most challenging pandemics of the last century with deadly outcomes and a high rate of the reproduction number. There are thousands of different types - or variants - of COVID circulating across the world. Viruses mutate all the time; it emphasizes the critical need for the designing of efficient vaccines to prevent virus infection, early and fast diagnosis, and effective antiviral and protective therapeutics. In this regard, the use of nanotechnology offers new opportunities for the development of novel strategies in terms of prevention, diagnosis, and treatment of COVID-19. This review presents an outline of the platforms developed using plasmonic nanoparticles in the detection, treatment, and prevention of SARS-CoV-2. We select the best strategies in each of these approaches. The properties of metallic plasmon NPs and their relevance in the development of novel point-of-care diagnosis approaches for COVID-19 are highlighted. Also, we discuss the current challenges and the future perspectives looking towards the clinical translation and the commercial aspects of nanotechnology and plasmonic NP-based diagnostic tools and therapy to fight COVID-19 pandemic. The article could be of significance for researchers dedicated to developing suitable plasmonic detection tools and therapy approaches for COVID-19 viruses and future pandemics.

Sodium-Alginate-Functionalized Silver Nanoparticles for Colorimetric Detection of Dimethoate

Sodium alginate (SA) was used to functionalize the surfaces of silver nanoparticles (AgNPs) to form SA-AgNPs for sensing dimethoate with a rapid and sensitive visual readout. UV-Vis spectrophotometry, Fourier transform infrared spectroscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, and zeta potential measurements were used to characterize SA-AgNPs that were synthesized under the ideal conditions. SA-AgNPs were spherical with an average size of 14.6 nm. The stability of SA-AgNPs was investigated with changes in pH, salinity, and storage time. This colorimetric assay of dimethoate relied on the change in the absorption ratio (A₄₇₅/A₄₀₀) of SA-AgNPs, resulting in their aggregation caused by dimethoate, leading to a visual change for SA-AgNPs from yellow to pale yellow. As a result, the absorption ratio (A₄₇₅/A₄₀₀) of SA-AgNPs showed good linearity in the range of 0.05 to 2.0 ppm (R² = 0.9986) with a limit of detection (LOD) of 30 ppb. Adding other pesticides did not significantly change the absorption ratio of SA-AgNPs, indicating its high selectivity as a colorimetric assay. The sensor was successfully used to detect dimethoate in actual water samples.

Cysteine-Encapsulated Liposome for Investigating Biomolecular Interactions at Lipid Membranes

The development of a strategy to investigate interfacial phenomena at lipid membranes is practically useful because most essential biomolecular interactions occur at cell membranes. In this study, a colorimetric method based on cysteine-encapsulated liposomes was examined using gold nanoparticles as a probe to provide a platform to report an enzymatic activity at lipid membranes. The cysteine-encapsulated liposomes were prepared with varying ratios of 1,2-dimyristoyl-sn-glycero-3-phosphocholine (DMPC) and cholesterol through the hydration of lipid films and extrusions in the presence of cysteine. The size, composition, and stability of resulting liposomes were analyzed by scanning electron microscopy (SEM), dynamic light scattering (DLS), nuclear magnetic resonance (NMR) spectroscopy, and UV-vis spectrophotometry. The results showed that the increased cholesterol content improved the stability of liposomes, and the liposomes were formulated with 60 mol % cholesterol for the subsequent experiments. Triton X-100 was tested to disrupt the lipid membranes to release the encapsulated cysteine from the liposomes. Cysteine can induce the aggregation of gold nanoparticles accompanying a color change, and the colorimetric response of gold nanoparticles to the released cysteine was investigated in various media. Except in buffer solutions at around pH 5, the cysteine-encapsulated liposomes showed the color change of gold nanoparticles only after being incubated with Triton X-100. Finally, the cysteine-encapsulated liposomal platform was tested to report the enzymatic activity of phospholipase A₂ that hydrolyzes phospholipids in the membrane. The hydrolysis of phospholipids triggered the release of cysteine from the liposomes, and the released cysteine was successfully detected by monitoring the distinct red-to-blue color change of gold nanoparticles. The presence of phospholipase A₂ was also confirmed by the appearance of a peak around 690 nm in the UV-vis spectra, which is caused by the cysteine-induced aggregation of gold nanoparticles. The results demonstrated that the cysteine-encapsulated liposome has the potential to be used to investigate biological interactions occurring at lipid membranes.

Recent developments in the use of gold and silver nanoparticles in biomedicine

Gold and silver nanoparticles (NPs) are widely used in the biomedical research both in the therapeutic and the sensing/diagnostics fronts. Both metals share some common optical properties with surface plasmon resonance being the most widely exploited property in therapeutics and diagnostics. Au NPs exhibit excellent light‐to‐heat conversion efficiencies and hence have found applications primarily in precision oncology, while Ag NPs have excellent antibacterial properties which can be harnessed in biomaterials' design. Both metals constitute excellent biosensing platforms owing to their plasmonic properties and are now routinely used in various optical platforms. The utilization of Au and Ag NPs in the COVID‐19 pandemic was rapidly expanded mostly in biosensing and point‐of‐care platforms and to some extent in therapeutics. In this review article, the main physicochemical properties of Au and Ag NPs are discussed with selective examples from the recent literature.

This article is categorized under:

Therapeutic Approaches and Drug Discovery > Nanomedicine for Oncologic Disease

Diagnostic Tools > In Vitro Nanoparticle‐Based Sensing

Nanotechnology Approaches to Biology > Nanoscale Systems in Biology

Diagnostic Tools for Rapid Screening and Detection of SARS-CoV-2 Infection

The novel coronavirus disease 2019 (COVID-19), caused by severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), has severely impacted human health and the health management system globally. The ongoing pandemic has required the development of more effective diagnostic strategies for restricting deadly disease. For appropriate disease management, accurate and rapid screening and isolation of the affected population is an efficient means of containment and the decimation of the disease. Therefore, considerable efforts are being directed toward the development of rapid and robust diagnostic techniques for respiratory infections, including SARS-CoV-2. In this article, we have summarized the origin, transmission, and various diagnostic techniques utilized for the detection of the SARS-CoV-2 virus. These higher-end techniques can also detect the virus copy number in asymptomatic samples. Furthermore, emerging rapid, cost-effective, and point-of-care diagnostic devices capable of large-scale population screening for COVID-19 are discussed. Finally, some breakthrough developments based on spectroscopic diagnosis that could revolutionize the field of rapid diagnosis are discussed.

Interactions of proteins with metal-based nanoparticles from a point of view of analytical chemistry - Challenges and opportunities

Interactions of proteins with nanomaterials draw attention of many research groups interested in fundamental phenomena. However, alongside with valuable information regarding physicochemical aspects of such processes and their mechanisms, they more and more often prove to be useful from a point of view of bioanalytics. Deliberate use of processes based on adsorption of proteins on nanoparticles (or vice versa) allows for a development of new analytical methods and improvement of the existing ones. It also leads to obtaining of nanoparticles of desired properties and functionalities, which can be used as elements of analytical tools for various applications. Due to interactions with nanoparticles, proteins can also gain new functionalities or lose their interfering potential, which from perspective of bioanalytics seems to be very inviting and attractive. In the framework of this article we will discuss the bioanalytical potential of interactions of proteins with a chosen group of nanoparticles, and implementation of so driven processes for biosensing. Moreover, we will show both positive and negative (opportunities and challenges) aspects resulting from the presence of proteins in media/samples containing metal-based nanoparticles or their precursors.