Nanomaterials Utilization in Biomass for Biofuel and Bioenergy Production

Prospects of graphene quantum dots preparation using lignocellulosic wastes for application in photofermentative hydrogen production

Graphene quantum dots (GQDs) are a novel carbon nanomaterial from the graphene family due to their unique physicochemical properties and diverse range of applications. However, in terms of the sustainable utility of GQDs, their synthesis methods are the main roadblock because of their high production costs and the release of toxic byproducts during the production processes. Thus, the search for sustainable and economical fabrication methods for preparing GQDs is one of the most essential areas of research for their practical applications. In this context, lignocellulosic biomass (LCB) wastes are a prime choice for the fabrication of GQDs due to their high carbon and cellulose content, which are favorable for being employed as precursors and reducing agents Additionally, LCBs are a prime source of potential bioenergy production, which is currently a key research hotspot to combat environmental pollution, global warming, and energy crises. Therefore, the present review provides feasibility for sustainable and environmentally friendly fabrication of GQDs using LCB wastes for their possible utility in cellulosic biofuel production technology improvement. Furthermore, the prospective of using these GQDs as catalysts in bioenergy production for the development of low-cost biomass-based biofuel production technology has been discussed along with the existing limitations and their sustainable recommendation.

The exploitation of bio-electrochemical system and microplastics removal: Possibilities and perspectives

Microplastic (MP) pollution has caused severe concern due to its harmful effect on human beings and ecosystems. Existing MP removal methods face many obstacles, such as high cost, high energy consumption, low efficiency, release of toxic chemicals, etc. Thus, it is crucial to find appropriate and sustainable methods to replace common MP removal approaches. Bio-electrochemical system (BES) is a sustainable clean energy technology that has been successfully applied to wastewater treatment, seawater desalination, metal removal, energy production, biosensors, etc. However, research reports on BES technology to eliminate MP pollution are limited. This paper reviews the mechanism, hazards, and common treatment methods of MP removal and discusses the application of BES systems to improve MP removal efficiency and sustainability. Firstly, the characteristics and limitations of common MP removal techniques are systematically summarized. Then, the potential application of BES technology in MP removal is explored. Furthermore, the feasibility and stability of the potential BES MP removal application are critically evalauted while recommendations for further research are proposed.

Organic waste-to-bioplastics: Conversion with eco-friendly technologies and approaches for sustainable environment

Petrochemical-based synthetic plastics poses a threat to humans, wildlife, marine life and the environment. Given the magnitude of eventual depletion of petrochemical sources and global environmental pollution caused by the manufacturing of synthetic plastics such as polyethylene (PET) and polypropylene (PP), it is essential to develop and adopt biopolymers as an environment friendly and cost-effective alternative to synthetic plastics. Research into bioplastics has been gaining traction as a way to create a more sustainable and eco-friendlier environment with a reduced environmental impact. Biodegradable bioplastics can have the same characteristics as traditional plastics while also offering additional benefits due to their low carbon footprint. Therefore, using organic waste from biological origin for bioplastic production not only reduces our reliance on edible feedstock but can also effectively assist with solid waste management. This review aims at providing an in-depth overview on recent developments in bioplastic-producing microorganisms, production procedures from various organic wastes using either pure or mixed microbial cultures (MMCs), microalgae, and chemical extraction methods. Low production yield and production costs are still the major bottlenecks to their deployment at industrial and commercial scale. However, their production and commercialization pose a significant challenge despite such potential. The major constraints are their production in small quantity, poor mechanical strength, lack of facilities and costly feed for industrial-scale production. This review further explores several methods for producing bioplastics with the aim of encouraging researchers and investors to explore ways to utilize these renewable resources in order to commercialize degradable bioplastics. Challenges, future prospects and Life cycle assessment of bioplastics are also highlighted. Utilizing a variety of bioplastics obtained from renewable and cost-effective sources (e.g., organic waste, agro-industrial waste, or microalgae) and determining the pertinent end-of-life option (e.g., composting or anaerobic digestion) may lead towards the right direction that assures the sustainable production of bioplastics.

Recent Advances in the Role of Different Nanoparticles in the Various Biosensors for the Detection of the Chikungunya Virus

Humans contract the Chikungunya virus (CHIKV), an alphavirus transmitted by mosquitoes that induces acute and chronic musculoskeletal discomfort and fever. Millions of cases of the disease have been attributed to CHIKV in the Indian Ocean region since 2004, and the virus has since spread to Europe, the Middle East, and the Pacific. The exponential proliferation of CHIKV in recent times underscores the critical nature of implementing preventative measures and exploring potential control strategies. The principal laboratory test employed to diagnose infection in serum samples collected over six days after the onset of symptoms is the detection of CHIKV or viral RNA. Although two commercially available real-time reverse transcription-polymerase chain reaction products exist, data on their validity are limited. A diagnostic instrument that is rapid, sensitive, specific, and cost-effective is, therefore an absolute necessity, particularly in developing nations. Biosensors have demonstrated considerable potential in the realm of pathogen detection. The rapid and sensitive detection of viruses has been facilitated by the development of numerous types of biosensors, including affinity-based nano-biosensors, graphene affinity-based biosensors, optical nano-biosensors, surface Plasmon Resonance-based optical nano-biosensors, and electrochemical nano-biosensors. Furthermore, the utilization of nanomaterials for signal extension, including but not limited to gold and silver nanoparticles, quantum dots, and iron oxide NPs, has enhanced the precision and sensitivity of biosensors. The developed innovative diagnostic method is time-efficient, precise, and economical; it can be implemented as a point-of-care device. The technique may be implemented in diagnostic laboratories and hospitals to identify patients infected with CHIKV. Throughout this article, we have examined a multitude of CHIKV nano-biosensors and their respective properties. Following a discussion of representative nanotechnologies for biosensors, numerous NPs-assisted CHIKV nano-biosensors are summarized in this article. As a result, we anticipate that this review will furnish a significant foundation for advancing innovative CHIKV nano-biosensors.

Fabrication and characterization of electrically conducting electrochemically synthesized polypyrrole-based enzymatic biofuel cell anode with biocompatible redox mediator vitamin K3

Enzymatic biofuel cells (EBFCs) hold tremendous potential to power biomedical devices, biosensors, and bioelectronics. Unlike conventional toxic batteries, these electrochemical devices are biocompatible, harnessing energy from physiological fluids and producing usable electrical energy. But the commercialization of EBFCs is limited by the low operational stability, limited power output and poor electron transport efficiency of the enzymatic electrodes. In this study, a novel bioanode exhibiting a high electron transfer ability and long-term stability was fabricated. For the preparation of the anode, surfactant-assisted polypyrrole (PPy) was electrochemically co-deposited on a platinum wire with the simultaneous entrapment of vitamin K3 (VK3) and GOx (glucose oxidase) in the PPy matrix. Herein, conducting PPy acts as an electron transfer enhancer and provides appropriate electrical communication between the active site of the enzyme glucose oxidase (GOx) and the electrode surface. Biocompatible redox mediator vitamin K3 was employed as an electron transfer mediator to shuttle electrons between the oxidized fuel glucose and surface of the electrode in the electrochemical cell. The electrical conductivity of PPy was measured using the four-probe technique of conductivity measurement of semiconductors. The morphological characterization of as-synthesized anode (PPy/CTAB/VK3/GOx) was performed by Fourier transform infrared (FTIR) spectroscopy, thermogravimetric analysis (TGA), X-ray diffraction (XRD), scanning electron microscopy (SEM) and transmission electron microscopy (TEM). The electrochemical characterization was studied by cyclic voltammetry (CV), linear sweep voltammetry (LSV) and electrochemical impedance spectroscopy (EIS) techniques. It was observed that the room-temperature conductivity of PPy lies in the semiconducting range and it also shows good stability on exposure to laboratory air, making it a promising material to provide electrical contact. The study developed a bioanode producing a modest current density of 6.35 mA cm-2 in 20 mM glucose solution. The stability, current output and ease of manufacturing process of the electrode make it particularly suitable for employment in biofuel cell applications.

Rice straw derived graphene-silica based nanocomposite and its application in improved co-fermentative microbial enzyme production and functional stability

Cellulases are the one of the most highly demanded industrial biocatalysts due to their versatile applications, such as in the biorefinery industry. However, relatively poor efficiency and high production costs are included as the key industrial constraints that hinder enzyme production and utilization at economic scale. Furthermore, the production and functional efficiency of the β-glucosidase (BGL) enzyme is usually found to be relatively low among the cellulase cocktail produced. Thus, the current study focuses on fungi-mediated improvement of BGL enzyme in the presence of a rice straw-derived graphene-silica-based nanocomposite (GSNCs), which has been characterized using various techniques to analyze its physicochemical properties. Under optimized conditions of solid-state fermentation (SSF), co-fermentation using co-cultured cellulolytic enzyme has been done, and maximum enzyme production of 42 IU/gds FP, 142 IU/gds BGL, and 103 IU/gds EG have been achieved at a 5 mg concentration of GSNCs. Moreover, at a 2.5 mg concentration of nanocatalyst, the BGL enzyme showed its thermal stability at 60°C and 70 °C by holding its half-life relative activity for 7 h, while the same enzyme demonstrated pH stability at pH 8.0 and 9.0 for the 10 h. This thermoalkali BGL enzyme might be useful for the long-term bioconversion of cellulosic biomass into sugar.

Advances in the catalyzed photo-fermentative biohydrogen production through photo nanocatalysts with the potential of selectivity, and customization

Photo nanocatalyst have shownpromise in a variety of fields, including biohydrogen production where their catalytic efficiency is related to size, surface-to-volume ratio, and increasing the number of atoms on the surface. They can harvest solar light to create electron-hole pairs which is the key mechanism to define its catalytic efficiency, thus requiring suitable excitation wavelength, band energy, and crystal imperfections. In this review, a discussion on the role of photo nanocatalysts to catalyze biohydrogen production has been carried out. Photo nanocatalysts feature a large bandgap, andhigh defect concentration, thus having the ability to be tuned for their characteristics. Customization of the photo nanocatalyst has been addressed. Mechanism of the photo nanocatalysts in catalyzing biohydrogen has been discussed. Limiting factors of photo nanocatalysts were highlighted and several recommendations have been made to enhance the effective utilization of these photo nanocatalysts to enhance photo-fermentative biohydrogen production from biomass wastes.

Microalgae in Bioplastic Production: A Comprehensive Review

The current era of industrialization includes a constantly increasing demand for plastic products, but because plastics are rarely recycled and are not biodegradable plastic pollution or "white pollution" has been the result. The consumption of petroleum-based plastics will be 20% of global annual oil by 2050, and thus there is an inevitable need to find an innovative solution to reduce plastic pollution. The biodegradable and environmentally benign bioplastics are suitable alternative to fossil-based plastics in the market due to sustainability, less carbon footprint, lower toxicity and high degradability rate. Microalgal species is an innovative approach to be explored and improved for bioplastic production. Microalgae are generally present in abundant quantity in our ecosystem, and polysaccharide in the algae can be processed and utilized to make biopolymers. Also, these species have a high growth rate and can be easily cultivated in wastewater streams. The review aims to determine the recent status of bioplastic production techniques from microalgal species and also reveal optimization opportunities involved in the process. Several strategies for bioplastic production from algal biomass are being discussed nowadays, and the most prominent are "with blending" (blending of algal biomass with bioplastics and starch) and "without blending" (microalgae as a feedstock for polyhydroxyalkanoates production). The advanced research on modern bioengineering techniques and well-established genetic tools like CRISPR-Cas9 should be encouraged to develop recombinant microalgae strains with elevated levels of PHA/PHB inside the cell.

Green synthesis of ZnFe2O4 nanoparticles using plant extracts and their applications: A review

Magnetic nanoparticles, particularly ZnFe₂O₄ are of enormous significance in biomedical and water treatment fields. However, chemical synthesis of ZnFe₂O₄ nanoparticles endures some major limitations, e.g., the use of toxic substances, unsafe procedure, and cost-ineffectiveness. Biological methods are more preferable approaches since they take advantages of biomolecules available in plant extract serving as reducing, capping, and stabilizing agents. Herein, we review plant-mediated synthesis and properties of ZnFe₂O₄ nanoparticles for multiple applications in catalytic and adsorption performance, biomedical, catalyst, and others. Effect of several factors such as Zn²⁺/Fe³⁺/extract ratio, and calcination temperature on morphology, surface chemistry, particle size, magnetism and bandgap energy of obtained ZnFe₂O₄ nanoparticles was discussed. The photocatalytic activity and adsorption for removal of toxic dyes, antibiotics, and pesticides were also evaluated. Main results of antibacterial, antifungal and anticancer activities for biomedical applications were summarized and compared. Several limitations and prospects of green ZnFe₂O₄ as an alternative to traditional luminescent powders have been proposed.

Microbial cellulase production and stability investigations via graphene like carbon nanostructure derived from paddy straw

Cellulases are among the most in-demand bioprocess enzymes, and the high cost of production, combined with their low enzymatic activity, is the main constraint, particularly in the biofuels industry. As a result, low-cost enzyme production modes with high activity and stability have emerged as the primary focus of research. Here, a method for producing a graphene like carbon nanostructure (GLCNs) has been investigated utilizing paddy straw (Ps), and its physicochemical characteristics have been examined using a variety of techniques including XRD, FT-IR, SEM and TEM. Further, the pretreatment of Ps feedstock for cellulase production was done using diluted waste KOH liquid collected during the preparation of the GLCNs. To increase the production and stability of the enzyme, newly prepared GLCNs is utilized as a nanocatalyst. Using 15 mg of GLCNs, 35 IU/gds FP activity was seen after 72 h, followed by 158 IU/gds EG and 114 IU/gds BGL activity in 96 h. This nanocatalyst supported enzyme was thermally stable at 70 °C up to 15 h and exhibited stability at pH 7.0 for 10 h by holding 66 % of its half-life.

Role of microalgae in achieving sustainable development goals and circular economy

In 2015, the United Nations General Assembly (UNGA) set out 17 Sustainable Development Goals (SDGs) to be achieved by 2030. These goals highlight key objectives that must be addressed. Each target focuses on a unique perspective crucial to meeting these goals. Social, political, and economic issues are addressed to comprehensively review the main issues combating climate change and creating sustainable and environmentally friendly industries, jobs, and communities. Several mechanisms that involve judicious use of biological entities are among instruments that are being explored to achieve the targets of SDGs. Microalgae have an increasing interest in various sectors, including; renewable energy, food, environmental management, water purification, and the production of chemicals such as biofertilizers, cosmetics, and healthcare products. The significance of microalgae also arises from their tendency to consume CO2, which is the main greenhouse gas and the major contributor to the climate change. This work discusses the roles of microalgae in achieving the various SDGs. Moreover, this work elaborates on the contribution of microalgae to the circular economy. It was found that the microalgae contribute to all the 17th SDGs, where they directly contribute to 9th of the SDGs and indirectly contribute to the rest. The major contribution of the Microalgae is clear in SDG-6 "Clean water and sanitation", SDG-7 "Affordable and clean energy", and SDG-13 "Climate action". Furthermore, it was found that Microalgae have a significant contribution to the circular economy.

Emerging Technologies for Enhancing Microalgae Biofuel Production: Recent Progress, Barriers, and Limitations

The world has heavily relied on fossil fuels for decades to supply energy demands. However, the usage of fossil fuels has been strongly correlated with impactful problems, which lead to global warming. Moreover, the excessive use of fossil fuels has led to their rapid depletion. Hence, exploring other renewable and sustainable alternatives to fossil fuels is imperative. One of the most sustainable fossil fuel alternatives is biofuel. Microalgae-based biofuels are receiving the attention of researchers due to their numerous advantages compared with those obtained from other types of feedstocks. Hence, it is essential to explore the recent technologies for biofuel produced from microalgae species and define the possible challenges that might be faced during this process. Therefore, this work presents the recent advancements in biofuel production from microalgae, focusing on emerging technologies such as those using nanomaterials and genetic engineering. This review focuses on the impact of nanoparticles on the harvesting efficiency of various microalgae species and the influence of nanoparticles on biofuel production. The genetic screening performed by genome-scale mutant libraries and their high-throughput screening may assist in developing effective strategies for enhancing microalgal strains and oil production through the modification of enzymes. Furthermore, the barriers that limit the production of biofuels from microalgae are introduced. Even though microalgae-based biofuels are perceived to engage with low negative impacts on the environment, this review paper touches on several environmental issues associated with the cultivation and harvesting of microalgae species. Moreover, the economic and technical feasibility limits the production of microalgae-based biofuels.

Advances in biological methods for the sequestration of heavy metals from water bodies: A review

Pollution is a major concern of the modern era as it affects all the principal aspects of the environment, especially the hydrosphere. Pollution with heavy metals has unequivocally threatened aquatic bodies and organisms as these metals are persistent, non-biodegradable, and toxic. Heavy metals tend to accumulate in the environment and eventually in humans, which makes their efficient removal a topic of paramount importance. Treatment of metal-contaminated water can be done both via chemical and biological methods. Where remediation through conventional methods is expensive and generates a large amount of sludge, biological methods are favoured over older and prevalent chemical purification processes because they are cheaper and environment friendly. The present review attempts to summarise effective methods for the remediation of water contaminated with heavy metals. We concluded that in biological techniques, bio-sorption is among the most employed and successful mechanisms because of its high efficacy and eco-friendly nature.

Relevance between Cassava Starch Liquefied by Phenol and Modification of Phenol-Formaldehyde Resin Wood Adhesive

A novel type of phenol-formaldehyde (PF) resin was prepared by utilizing the liquefaction products liquefied by phenol under acidic conditions and then reacted with formaldehyde under alkaline conditions. The relationship between the liquefaction behavior of cassava starch and the properties of modified PF resin wood adhesive was studied. The effects of the liquid–solid ratio of phenol to cassava starch, sulfuric acid usage, and liquefaction time on the liquefaction residue rate and relative crystallinity of cassava starch were determined. The results showed that the bonding strength of modified PF resin decreased gradually with the decrease of the liquid–solid ratio. It was a great surprise that bonding strength still met the requirement of the national standard of 0.7 MPa when the liquid–solid ratio was 1.0. The detailed contents were analyzed through FT-IR, SEM, and XRD. In terms of the utilization of bio-materials for liquefaction to synthesize wood adhesive, cassava starch may be superior to the others.

Indicators of water biotoxicity obtained from turn-off microbial electrochemical sensors

The development of biosensors is critical to reducing potential risks associated with contamination accidents. However, the application of microbial electrochemical sensors for water biotoxicity monitoring is hampered by the lack of an indicator with high response magnitudes. In this study, microbial electrochemical sensors were fabricated with interdigitated electrode arrays (IDAs), and indicators from various electrochemical analyses were comprehensively investigated. Only the peak of cyclic voltammetry (CV) was highly linearly correlated with the commonly used current indicator during the enrichment of the electroactive biofilm. The resistance fitted from the electrochemical impedance spectroscopy (EIS) data provided a comparable and even higher inhibition ratio (IR) than the current during toxicity assessments. The differential pulse voltammetry (DPV) did not exhibit a higher sensitivity than the CV peak. However, no clear response was observed in the real-time impedance analysis for use in water biotoxicity monitoring. Most of the microbes were in the propidium iodide (PI)-permeable state after the toxicity assessments, although the current was fully recovered. This study demonstrates the potential to use EIS data as indicators of water biotoxicity using microbial electrochemical sensors.

The Expansion of Lignocellulose Biomass Conversion Into Bioenergy via Nanobiotechnology

Lignocellulosic biomass has arisen as a solution to our energy and environmental challenges because it is rich in feedstock that can be converted to biofuels. Converting lignocellulosic biomass to sugar is a complicated system involved in the bioconversion process. There are indeed a variety of techniques that have been utilized in the bioconversion process consisting of physical, chemical, and biological approaches. However, most of them have drawbacks when used on a large scale, which include the high cost of processing, the development of harmful inhibitors, and the detoxification of the inhibitors that have been produced. These constraints, taken together, hinder the effectiveness of current solutions and demand for the invention of a new, productive, cost-effective, and environmentally sustainable technique for LB processing. In this context, the approach of nanotechnology utilizing various nanomaterials and nanoparticles in treating lignocellulose biomass and bioenergy conversion has achieved increased interest and has been explored greatly in recent times. This mini review delves into the application of nanotechnological techniques in the bioconversion of lignocellulose biomass into bioenergy. This review on nanotechnological application in biomass conversion provides insights and development tools for the expansion of new sectors, resulting in excellent value and productivity, contributing to the long-term economic progress.

Biogenic enabled in-vitro synthesis of nickel cobaltite nanoparticle and its application in single stage hybrid biohydrogen production

In biomass to biofuels production technology enzyme plays a key role. Nevertheless, the high production cost of cellulase enzyme is one of the critical issues in the economical production of biofuels. Nowadays, implementation of nanomaterials as catalyst is emerging as an innovative approach for the production of sustainable energy. In this context, synthesis of nickel cobaltite nanoparticles (NiCo₂O₄ NPs) via in vitro route has been conducted using fungus Emericella variecolor NS3 meanwhile; its impact has been evaluated on improved thermal and pH stability of crude cellulase enzyme obtained from Emericella variecolor NS3. Additionally, bioconversion of alkali treated rice straw using NiCo₂O₄ NPs stabilized cellulase produced sugar hydrolyzate which is further used for H₂ production via hybrid fermentation. Total 51.7 g/L sugar hydrolyzate produced 2978 mL/L cumulative H₂ production after 336 h along with maximum rate 34.12 mL/L/h in 24 h using Bacillus subtilis PF_1 and Rhodobacter sp. employed for dark and photo-fermentation, respectively.

The Combined Effect of ZnO and CeO2 Nanoparticles on Pisum sativum L.: A Photosynthesis and Nutrients Uptake Study

Cerium oxide nanoparticles (CeO2 NPs) and zinc oxide nanoparticles (ZnO NPs) are emerging pollutants that are likely to occur in the contemporary environment. So far, their combined effects on terrestrial plants have not been thoroughly investigated. Obviously, this subject is a challenge for modern ecotoxicology. In this study, Pisum sativum L. plants were exposed to either CeO2 NPs or ZnO NPs alone, or mixtures of these nano-oxides (at two concentrations: 100 and 200 mg/L). The plants were cultivated in hydroponic system for twelve days. The combined effect of NPs was proved by 1D ANOVA augmented by Tukey's post hoc test at p = 0.95. It affected all major plant growth and photosynthesis parameters. Additionally, HR-CS AAS and ICP-OES were used to determine concentrations of Cu, Mn, Fe, Mg, Ca, K, Zn, and Ce in roots and shoots. Treatment of the pea plants with the NPs, either alone or in combination affected the homeostasis of these metals in the plants. CeO2 NPs stimulated the photosynthesis rate, while ZnO NPs prompted stomatal and biochemical limitations. In the mixed ZnO and CeO2 treatments, the latter effects were decreased by CeO2 NPs. These results indicate that free radicals scavenging properties of CeO2 NPs mitigate the toxicity symptoms induced in the plants by ZnO NPs.

Biofuel production from Macroalgae: present scenario and future scope

The current fossil fuel reserves are not sufficient to meet the increasing demand and very soon will become exhausted. Pollution, global warming, and inflated oil prices have led the quest for renewable energy sources. Macroalgae (green, brown, and red marine seaweed) is gaining popularity as a viable and promising renewable source for biofuels production. Numerous researches have been conducted to access the potential of macroalgae for generating diverse bioproducts such as biofuels. The existence of components such as carbohydrates and lipids, and the lack or deficiency of lignin, create macroalgae an enviable feedstock for biofuels generation. This review briefly covers the potential macroalgal species promoting the production of biofuels and their cultivation methods. It also illustrates the biofuel generation pathway and its efficiency along with the recent techniques to accelerate the product yield. In addition, the current analysis focuses on a cost-effective sustainable generation of biofuel along with commercialization and scaleup.

Application of biomass derived products in mid-size automotive industries: A review

The automotive industry is directly affected by the shortage of fossil fuels and the excessive pollution resulting from crude oil-based fuels has many adverse effects on the environment. The search for a greener and sustainable source of materials and fuels to power automobiles has ultimately led to the usage of biomass and biobased sources as the main precursor due to its graft availability and renewability. Biobased fuels developed have been shown to easily blend in with the existing automobile engines and to provide sustainable performance. Similarly, the usage of various biobased polymers, plastics, and composite materials as the structural materials for the construction of automobiles instead of crude oil sources have shown to be invaluable. The powering of automobiles with electricity is the future of the transportation industry to address the greenhouse gas emissions caused by fossil fuels. Hence, biobased lithium-ion batteries and supercapacitors have started to enter the mid-sized automotive industry. However, extensive commercialization of biobased products application in the automotive sector is underdeveloped. Hence it is customary to assess the various drawbacks of using biobased materials and identify the correct pathway for new research and development in this field. Therefore, this review covers various applications of biobased products in the automotive industries and mentions the active researches going on in this field to replace petroleum and crude oil-based sources with biobased sources.

Trends in Nanotechnology and Its Potentialities to Control Plant Pathogenic Fungi: A Review

Approximately 15-18% of crops losses occur as a result of animal pests, while weeds and microbial diseases cause 34 and 16% losses, respectively. Fungal pathogens cause about 70-80% losses in yield. The present strategies for plant disease control depend transcendently on agrochemicals that cause negative effects on the environment and humans. Nanotechnology can help by reducing the negative impact of the fungicides, such as enhancing the solubility of low water-soluble fungicides, increasing the shelf-life, and reducing toxicity, in a sustainable and eco-friendly manner. Despite many advantages of the utilization of nanoparticles, very few nanoparticle-based products have so far been produced in commercial quantities for agricultural purposes. The shortage of commercial uses may be associated with many factors, for example, a lack of pest crop host systems usage and the insufficient number of field trials. In some areas, nanotechnology has been advanced, and the best way to be in touch with the advances in nanotechnology in agriculture is to understand the major aspect of the research and to address the scientific gaps in order to facilitate the development which can provide a rationale of different nanoproducts in commercial quantity. In this review, we, therefore, described the properties and synthesis of nanoparticles, their utilization for plant pathogenic fungal disease control (either in the form of (a) nanoparticles alone, that act as a protectant or (b) in the form of a nanocarrier for different fungicides), nano-formulations of agro-nanofungicides, Zataria multiflora, and ginger essential oils to control plant pathogenic fungi, as well as the biosafety and limitations of the nanoparticles applications.

How does the Internet of Things (IoT) help in microalgae biorefinery?

Microalgae biorefinery is a platform for the conversion of microalgal biomass into a variety of value-added products, such as biofuels, bio-based chemicals, biomaterials, and bioactive substances. Commercialization and industrialization of microalgae biorefinery heavily rely on the capability and efficiency of large-scale cultivation of microalgae. Thus, there is an urgent need for novel technologies that can be used to monitor, automatically control, and precisely predict microalgae production. In light of this, innovative applications of the Internet of things (IoT) technologies in microalgae biorefinery have attracted tremendous research efforts. IoT has potential applications in a microalgae biorefinery for the automatic control of microalgae cultivation, monitoring and manipulation of microalgal cultivation parameters, optimization of microalgae productivity, identification of toxic algae species, screening of target microalgae species, classification of microalgae species, and viability detection of microalgal cells. In this critical review, cutting-edge IoT technologies that could be adopted to microalgae biorefinery in the upstream and downstream processing are described comprehensively. The current advances of the integration of IoT with microalgae biorefinery are presented. What this review discussed includes automation, sensors, lab-on-chip, and machine learning, which are the main constituent elements and advanced technologies of IoT. Specifically, future research directions are discussed with special emphasis on the development of sensors, the application of microfluidic technology, robotized microalgae, high-throughput platforms, deep learning, and other innovative techniques. This review could contribute greatly to the novelty and relevance in the field of IoT-based microalgae biorefinery to develop smarter, safer, cleaner, greener, and economically efficient techniques for exhaustive energy recovery during the biorefinery process.

Recent developments in physical, biological, chemical, and hybrid treatment techniques for removing emerging contaminants from wastewater

Emerging contaminants (ECs) in wastewater have recently attracted the attention of researchers as they pose significant risks to human health and wildlife. This paper presents the state-of-art technologies used to remove ECs from wastewater through a comprehensive review. It also highlights the challenges faced by existing EC removal technologies in wastewater treatment plants and provides future research directions. Many treatment technologies like biological, chemical, and physical approaches have been advanced for removing various ECs. However, currently, no individual technology can effectively remove ECs, whereas hybrid systems have often been found to be more efficient. A hybrid technique of ozonation accompanied by activated carbon was found significantly effective in removing some ECs, particularly pharmaceuticals and pesticides. Despite the lack of extensive research, nanotechnology may be a promising approach as nanomaterial incorporated technologies have shown potential in removing different contaminants from wastewater. Nevertheless, most existing technologies are highly energy and resource-intensive as well as costly to maintain and operate. Besides, most proposed advanced treatment technologies are yet to be evaluated for large-scale practicality. Complemented with techno-economic feasibility studies of the treatment techniques, comprehensive research and development are therefore necessary to achieve a full and effective removal of ECs by wastewater treatment plants.

Abatement of hazardous materials and biomass waste via pyrolysis and co-pyrolysis for environmental sustainability and circular economy

The remarkable journey of progression of mankind has created various impacts in the form of polluted environment, amassed heavy metals and depleting resources. This alarming situation demands sustainable energy resources and approaches to deal with these environmental hazards and power deficit. Pyrolysis and co-pyrolysis address both energy and environmental issues caused by civilization and industrialization. The processes use hazardous waste materials including waste tires, plastic and medical waste, and biomass waste such as livestock waste and agricultural waste as feedstock to produce gas, char and pyrolysis oil for energy production. Usage of hazardous materials as pyrolysis and co-pyrolysis feedstock reduces disposal of harmful substances into environment, reducing occurrence of soil and water pollution, and substituting the non-renewable feedstock, fossil fuels. As compared to combustion, pyrolysis and co-pyrolysis have less emission of air pollutants and act as alternative options to landfill disposal and incineration for hazardous materials and biomass waste. Hence, stabilizing heavy metals and solving the energy and waste management problems. This review discusses the pyrolysis and co-pyrolysis of biomass and harmful wastes to strive towards circular economy and eco-friendly, cleaner energy with minimum waste disposal, reducing negative impact on the planet and creating future possibilities.

Algae utilization and its role in the development of green cities

With the rapid urbanisation happening around the world followed by the massive demand for clean energy resources, green cities play a pivotal role in building a sustainable future for the people. The continuing depletion of natural resources has led to the development of renewable energy with algae as the promising source. The high growth rate of microalgae and their strong bio-fixation ability to convert CO₂ into O₂ have been gaining attention globally and intensive research has been conducted regarding the microalgae benefits. The focus on potential of microalgae in contributing to the development of green cities is rising. The advantage of microalgae is their ability to gather energy from sunlight and carbon dioxide, followed by transforming the nutrients into biomass and oxygen. This leads to the creation of green cities through algae cultivation as waste and renewable materials can be put to good use. The challenges that arise when using algae and the future prospect in terms of SDGs and economy will also be covered in this review. The future of green cities can be enhanced with the adaptation of algae as the source of renewable plants to create a better outlook of an algae green city.

Sustainable utilization of biowaste compost for renewable energy and soil amendments

Acceleration of urbanization and industrialization has resulted in the drastic rise of waste generation with majority of them being biowaste. This constitutes a global challenge since conventional waste management methods (i.e., landfills) present environmental issues including greenhouse gases emissions, leachate formation and toxins release. A sustainable and effective approach to treat biowaste is through composting. Various aspects of composting such as compost quality, composting systems and compost pelletization are summarized in this paper. Common application of compost as fertilizer or soil amendment is presented with focus on the low adoption level of organic waste compost in reality. Rarely known, compost which is easily combustible can be utilized to generate electricity. With the analysis on critical approaches, this review aims to provide a comprehensive study on energy content of compost pellets, which has never been reviewed before. Environmental impacts and future prospects are also highlighted to provide further insights on application of this technology to close the loop of circular bioeconomy.

Ultrasonically-Assisted Dissolution of Sugarcane Bagasse during Dilute Acid Pretreatment: Experiments and Kinetic Modeling

Ultrasonic irradiation is known to enhance various physicochemical processes. In this work, the effect of ultrasound on the dissolution of sugarcane bagasse was studied, with the specific aims of quantifying the effect at low solids loading and mild reaction conditions, and determining whether the enhancement of dissolution by ultrasound is independent of temperature. The effects of agitation speed, reaction time, and sonication were examined on the dissolution of the biomass substrate at varying reaction temperatures during the pretreatment process. Sugarcane bagasse was mixed with a 0.3 M solution of sulfuric acid in a reaction vessel to undergo pretreatment. A kinetic model was applied to the mass dissolution of the biomass, as sonicated runs showed higher mass losses at each reaction time, compared to the non-sonicated runs. The ultrasonic enhancement in mass dissolution was seen to increase for an increase in the reaction time. It was observed that the induction period for the dissolution was eliminated by the application of ultrasound. Ultrasound was found to be more effective than temperature at enhancing mass dissolution at low solids loadings, and the effect of ultrasound was also found to be dependent on the temperature employed.

Nature's fight against plastic pollution: Algae for plastic biodegradation and bioplastics production

The increased global demand for plastic materials has led to severe plastic waste pollution, particularly to the marine environment. This critical issue affects both sea life and human beings since microplastics can enter the food chain and cause several health impacts. Plastic recycling, chemical treatments, incineration and landfill are apparently not the optimum solutions for reducing plastic pollution. Hence, this review presents two newly identified environmentally friendly approaches, plastic biodegradation and bioplastic production using algae, to solve the increased global plastic waste. Algae, particularly microalgae, can degrade the plastic materials through the toxins systems or enzymes synthesized by microalgae itself while using the plastic polymers as carbon sources. Utilizing algae for plastic biodegradation has been critically reviewed in this paper to demonstrate the mechanism and how microplastics affect the algae. On the other hand, algae-derived bioplastics have identical properties and characteristics as petroleum-based plastics, while remarkably being biodegradable in nature. This review provides new insights into different methods of producing algae-based bioplastics (e.g., blending with other materials and genetic engineering), followed by the discussion on the challenges and further research direction to increase their commercial feasibility.