The Potential for Microalgae as Bioreactors to Produce Pharmaceuticals

Enhancement of Growth and Lipid Production in Microalgae Using Aggregation-Induced Emission Based Luminescent Material for Sustainable Food and Fuel

Aggregation-Induced Emission (AIE) based nanomaterials are progressively gaining momentum owing to their evolvement into an interdisciplinary field ranging from biomass and biomolecule yield to image-guided photodynamic therapy. This study focuses on a novel strategy to enhance growth, lipid accumulation, and in vivo fluorescence visualisation in green microalgae Chlamydomonas reinhardtii using AIE nanoparticles to quantify radical changes. The absorption of AIE photosensitiser (PS), TTMN (C26H17N3S[M]+) was recorded from 420 to 570 nm with a peak at 500 nm, and the emission ranged from 550 to 800 nm with a peak at 650 nm. As a reactive oxygen species (ROS) molecule, H2O2 generation of TTMN in C. reinhardtii cells was detected with AIE nanoprobes TPE-BO (C38H42B2O4). H2O2 accumulation increased with the increase of TTMN concentrations. The maximum growth (2.1×107 cell/mL) was observed at 10 μM TTMN-exposed C. reinhardtii cells. Significant lipid accumulation was found in both 10 and 15 μM TTMN-treated cells. For lipid visualisation, an AIE nanoprobe, 2-DPAN (C24H18N2O) was used, and superior fluorescence was determined and compared with the traditional BODIPY dye. Cytotoxicity analysis of 10 μM TTMN on the HaCat cell line with 86.2 % cell viability revealed its high biocompatibility on living cells. This AIE-based nanotechnology provides a novel approach for microalgae-derived sustainable biomass and eco-friendly biofuel production.

Microplastic pollution: A global perspective in surface waters, microbial degradation, and corresponding mechanism

Plastics are incredibly useful materials that have many benefits for both society and individual daily lives. However, the extensive utilization of plastic and plastic-derived products has led to plastic pollution in various environmental compartments across the world at alarming levels. Due to different biogeochemical processes, this plastic waste is broken down into tiny, omnipresent, and long-lasting fragments known as microplastics (<5 mm), which are causing great concern among scientists. Microplastics tend to bioaccumulate, contain toxic chemicals, and have other pollutants and pathogens adsorbed on their surface, thus having adverse effects on organisms. Globally dispersed, microplastics can now be found in almost every environmental niche. Therefore, the purpose of this paper is to give an overview of the research that has been done on this topic, summarize the evidence of microplastic pollution in surface waters, and discuss the analytical summary of recent findings on the microbial degradation of microplastics and effects of various parameters on its degradation as well as the potential degradation mechanism of microplastics. A summary of the most recent and relevant literature is provided on microplastic pollution and microorganisms that can break down various microplastics are classified according to their types including bacteria, fungi, and algae. The environmental factors influencing microplastic degradation and the associated degradation effects are therefore generalized. Additionally, a brief discussion of the mechanism underlying the microbial-mediated degradation of microplastics is provided. This review serves as a reference for upcoming research looking into efficient ways to reduce microplastic pollution.

Applications of low-temperature plasma technology in microalgae cultivation and mutant breeding: A comprehensive review

Low-temperature plasma (LTP) has gained significant attention recently due to its unique properties and potentially wide applications in agriculture, medicine, and food industry. Microalgae have become important to human life since they provide raw materials and bioactive products to industries. This review especially examines how LTP technology can be utilized to enhance microalgae growth and production of various metabolites and bioactive compounds such as astaxanthin, biofuel, lipid, proteins, and polysaccharides through mutagenesis and/or stimulation. Also, this review suggests that LTP may be combined with multi-omics tools such as proteomics, transcriptome, metabolomics and advanced methods such as single-cell analysis techniques to provide a promising strategy for acquiring desirable strains in algal mutant breeding and for enhancing the production of bioactive compounds in the microalgae. By shedding light on the benefits and applications of LTP, we hope to inspire new solutions to the challenges of commercial-scale microalgae development.

A review on algal biomass dewatering and recovery of microalgal-based valuable products with different membrane technologies

Efficient microalgae harvesting and dewatering are critical processes for a range of applications, including the production of raw materials, nutritional supplements, pharmaceuticals, sustainable biofuels, and wastewater treatment. The optimization of these processes poses significant challenges due to the need for high efficiency and sustainability while managing costs and energy consumption. This review comprehensively addresses these challenges by focusing on the development and application of various membrane filtration technologies specifically designed for the effective harvesting and dewatering of algal biomass. Membrane filtration has emerged as a predominant method due to its ability to handle large volumes of microalgae with relatively low energy requirements. This review systematically examines the different membrane-based technologies and their effectiveness in recovering valuable components from algal biomass, such as lipids, proteins, and carbohydrates. The discussion begins with an overview of the physical characteristics of microalgae and their cultivation conditions, which are critical for understanding how these factors influence the performance of membrane filtration processes. Key aspects such as the features of algal cells, the presence of algal organic matter, and transparent exopolymer particles are explored in detail. The review also delves into various strategies for improving membrane antifouling properties, which are essential for maintaining the efficiency and longevity of the filtration systems. In addition, the advantages and disadvantages of different membrane techniques are reviewed, highlighting their respective performance in separating microalgae and dewatering. Finally, the review offers insights into future research directions and technological advancements that could further enhance the efficiency and sustainability of microalgae processing. This comprehensive evaluation aims to provide a thorough understanding of current membrane technologies, their applications, and the ongoing developments necessary to overcome existing limitations and improve overall process performance.

Microplastics pollution in the marine environment: A review of sources, impacts and mitigation

Over the past few years, microplastics (MPs) pollution in the marine environment has emerged as a significant environmental concern. Poor management practices lead to millions of tons of plastic waste entering oceans annually, primarily from land-based sources like mismanaged waste, urban runoff, and industrial activities. MPs pollution in marine environments poses a significant threat to ecosystems and human health, as it adsorbs pollutants, heavy metals, and leaches additives such as plasticizers and flame retardants, thus contributing to chemical pollution. The review article provides a comprehensive overview of MPs pollution, its sources, and impacts on marine environments, including human health, detection techniques, and strategies for mitigating microplastic contamination in marine environments. The paper provides current information on microplastic pollution in marine environments, offering insights for researchers, policymakers, and the public, as well as promoting sustainable practices to protect the environment.

Flocculation of Micractinium reisseri for successful harvesting and potential use

This study includes Micractinium reisseri cultivation in artificial saline medium (ASM). With the aim of harvesting the bulk M. reisseri biomass, an experiment was set up at a bench scale to evaluate the best flocculation technique with the least compromising biomass and lipid loss. The flocculation efficiencies for the M. reisseri biomass have been studied using the auto-, bio-, and chemical-flocculation methods. Different concentrations of chitosan for the biological method and alum for the chemical method were added in M. reisseri culture growing in the liquid ASM. The optimal concentration with the highest biomass and oil collection was determined for each method. In the biological method, the highest (96.44%) and lowest (67.88%) flocculation efficiencies were observed by adding 15 and 2 mg of chitosan, respectively, and in the chemical method, the highest (97.2%) and lowest (35.4%) flocculation efficiencies were observed by adding 150 and 50 mg of alum, respectively. The auto-flocculation method shows the highest efficiency (97.8%) among all the tests. The oil yield from the three highest biomasses was 2.60, 1.51, and 1.08% in the auto-, bio-, and chemical-flocculation methods, respectively. The time taken for auto-, bio-, and chemical-flocculation was 48, 4, and 1 h, respectively.

Harmful impacts of microplastic pollution on poultry and biodegradation techniques using microorganisms for consumer health protection: A review

Microplastics (MPs) are small plastic particles less than five millimeters in size. Microplastic pollution poses a serious threat to ecosystems, affecting both biotic and abiotic components. Current techniques used to eliminate microplastics include recycling, landfilling, incineration, and biodegradation. Microplastics have been detected in various animal species, including poultry, fish, mammals, and invertebrates, indicating widespread exposure and potential bioaccumulation. In the Middle East, MPs contamination was discovered in chicken purchased from food shops, chain supermarkets, and open markets. The contamination levels ranged from 0.03±0.04 to 1.19±0.72 particles per gram of chicken meat. In poultry, microplastics negatively affect production and harm vital organs such as the kidneys, spleen, and lungs. In humans, exposure to microplastics can lead to inflammation, immune responses, metabolic disturbances, DNA damage, neurological damage, and even cancer upon contact with mucosal membranes or absorption into the body. Several studies have explored the use of microorganisms, including bacteria, fungi, and algae, to degrade microplastics, offering an economical and environmentally friendly solution. Different polymers were cultured with strains of Bacillus spp. (SB-14 and SC-9) and Streptococcus spp. (SC-56) for a duration of 40 days. Degradation rates for LDPE were 11.8 %, 4.8 %, and 9.8 %. The rates of deterioration for HDPE were 11.7 %, 3.8 %, and 13.7 %. Rates for polyester beads were 17.3 %, 9.4 %, and 5.8 %. This review focuses on the effects of microorganisms in removing microplastic pollution, the detrimental impact of microplastics on poultry production, and the connection between microplastic pollution and human health.

Integrated energy informatics technology on microalgae-based wastewater treatment to bioenergy production: A review

The production of renewable biofuel through microalgae and green technology can be a promising solution to meet future energy demands whilst reducing greenhouse gases (GHG) emissions and recovering energy for a carbon-neutral bio-economy and environmental sustainability. Recently, the integration of Energy Informatics (EI) technology as an emerging approach has ensured the feasibility and enhancement of microalgal biotechnology and bioenergy applications. Integrating EI technology such as artificial intelligence (AI), predictive modelling systems and life cycle analysis (LCA) in microalgae field applications can improve cost, efficiency, productivity and sustainability. With the approach of EI technology, data-driven insights and decision-making, resource optimization and a better understanding of the environmental impact of microalgae cultivation could be achieved, making it a crucial step in advancing this field and its applications. This review presents the conventional technologies in the microalgae-based system for wastewater treatment and bioenergy production. Furthermore, the recent integration of EI in microalgal technology from the AI application to the modelling and optimization using predictive control systems has been discussed. The LCA and techno-economic assessment (TEA) in the environmental sustainability and economic point of view are also presented. Future challenges and perspectives in the microalgae-based wastewater treatment to bioenergy production integrated with the EI approach, are also discussed in relation to the development of microalgae as the future energy source.

The red alga Porphyridium as a host for molecular farming: Efficient production of immunologically active hepatitis C virus glycoprotein

Microalgae are promising production platforms for the cost-effective production of recombinant proteins. We have recently established that the red alga Porphyridium purpureum provides superior transgene expression properties, due to the episomal maintenance of transformation vectors as multicopy plasmids in the nucleus. Here, we have explored the potential of Porphyridium to synthesize complex pharmaceutical proteins to high levels. Testing expression constructs for a candidate subunit vaccine against the hepatitis C virus (HCV), we show that the soluble HCV E2 glycoprotein can be produced in transgenic algal cultures to high levels. The antigen undergoes faithful posttranslational modification by N-glycosylation and is recognized by conformationally selective antibodies, suggesting that it adopts a proper antigenic conformation in the endoplasmic reticulum of red algal cells. We also report the experimental determination of the structure of the N-glycan moiety that is attached to glycosylated proteins in Porphyridium. Finally, we demonstrate the immunogenicity of the HCV antigen produced in red algae when administered by injection as pure protein or by feeding of algal biomass.

Bio-inspired drug delivery systems: A new attempt from bioinspiration to biomedical applications

Natural organisms have evolved sophisticated and multiscale hierarchical structures over time to enable survival. Currently, bionic design is revolutionizing drug delivery systems (DDS), drawing inspiration from the structure and properties of natural organisms that offer new possibilities to overcome the challenges of traditional drug delivery systems. Bionic drug delivery has contributed to a significant improvement in therapeutic outcomes, providing personalized regimens for patients with various diseases and enhancing both their quality of life and drug efficacy. Therefore, it is important to summarize the progress made so far and to discuss the challenges and opportunities for future development. Herein, we review the recent advances in bio-inspired materials, bio-inspired drug vehicles, and drug-loading platforms of biomimetic structures and properties, emphasizing the importance of adapting the structure and function of organisms to meet the needs of drug delivery systems. Finally, we highlight the delivery strategies of bionics in DDS to provide new perspectives and insights into the research and exploration of bionics in DDS. Hopefully, this review will provide future insights into utilizing biologically active vehicles, bio-structures, and bio-functions, leading to better clinical outcomes.

Microplastics and environmental effects: investigating the effects of microplastics on aquatic habitats and their impact on human health

Microplastics (MPs) are particles with a diameter of <5 mm. The disposal of plastic waste into the environment poses a significant and pressing issue concern globally. Growing worry has been expressed in recent years over the impact of MPs on both human health and the entire natural ecosystem. MPs impact the feeding and digestive capabilities of marine organisms, as well as hinder the development of plant roots and leaves. Numerous studies have shown that the majority of individuals consume substantial quantities of MPs either through their dietary intake or by inhaling them. MPs have been identified in various human biological samples, such as lungs, stool, placenta, sputum, breast milk, liver, and blood. MPs can cause various illnesses in humans, depending on how they enter the body. Healthy and sustainable ecosystems depend on the proper functioning of microbiota, however, MPs disrupt the balance of microbiota. Also, due to their high surface area compared to their volume and chemical characteristics, MPs act as pollutant absorbers in different environments. Multiple policies and initiatives exist at both the domestic and global levels to mitigate pollution caused by MPs. Various techniques are currently employed to remove MPs, such as biodegradation, filtration systems, incineration, landfill disposal, and recycling, among others. In this review, we will discuss the sources and types of MPs, the presence of MPs in different environments and food, the impact of MPs on human health and microbiota, mechanisms of pollutant adsorption on MPs, and the methods of removing MPs with algae and microbes.

Functional and Extracellular Production and Antitumor Activity of Mouse Alpha Klotho in Model Microalga Chlamydomonas reinhardtii

Klotho is a human protein with versatile functions associated with longevity and well-being. α-Klotho (α-KL) deficiency in the circulatory system is associated with reduced life expectancy with numerous disorders such as chronic kidney disease, atherosclerosis, infertility, skin atrophy, emphysema, and osteoporosis. The antagonistic effects of Klotho protein against intractable cancers have also been well documented over the past two decades. In addition, recent findings have also illuminated the importance of soluble Klotho during cognitive development, oxidative stress, cellular apoptosis, and neurodegenerative disorders. The low-cost and sustainable production of alpha Klotho protein is extremely important for its widespread use against different diseases. Here, we report heterologous, functional, and extracellular production of mouse α-KL (mα-KL) protein in model microalga Chlamydomonas reinhardtii. The secretion of mα-KL into the extracellular environment facilitated downstream processes and warranted low-cost purification in high-titer. Furthermore, the anticarcinogenic efficiency of recombinant mα-KL was examined and validated on Rattus norvegicus AR42J pancreas tumors. Microalgae-based photosynthetic, low-cost, and scalable production of mα-KL could be used to develop a variety of cosmetics, pharmaceuticals, and wellness products, all aimed at serving health and well-being.

How Synthesis of Algal Nanoparticles Affects Cancer Therapy? - A Complete Review of the Literature

The necessity to engineer sustainable nanomaterials for the environment and human health has recently increased. Due to their abundance, fast growth, easy cultivation, biocompatibility and richness of secondary metabolites, algae are valuable biological source for the green synthesis of nanoparticles (NPs). The aim of this review is to demonstrate the feasibility of using algal-based NPs for cancer treatment. Blue-green, brown, red and green micro- and macro-algae are the most commonly participating algae in the green synthesis of NPs. In this process, many algal bioactive compounds, such as proteins, carbohydrates, lipids, alkaloids, flavonoids and phenols, can catalyze the reduction of metal ions to NPs. In addition, many driving factors, including pH, temperature, duration, static conditions and substrate concentration, are involved to facilitate the green synthesis of algal-based NPs. Here, the biosynthesis, mechanisms and applications of algal-synthesized NPs in cancer therapy have been critically discussed. We also reviewed the effective role of algal synthesized NPs as anticancer treatment against human breast, colon and lung cancers and carcinoma.

The osteogenic and mineralogenic potential of the microalgae Skeletonema costatum and Tetraselmis striata CTP4 in fish models

Skeletal disorders are problematic aspects for the aquaculture industry as skeletal deformities, which affect most species of farmed fish, increase production costs and affect fish welfare. Following recent findings that show the presence of osteoactive compounds in marine organisms, we evaluated the osteogenic and mineralogenic potential of commercially available microalgae strains Skeletonema costatum and Tetraselmis striata CTP4 in several fish systems. Ethanolic extracts increased extracellular matrix mineralization in gilthead seabream (Sparus aurata) bone-derived cell cultures and promoted osteoblastic differentiation in zebrafish (Danio rerio) larvae. Long-term dietary exposure to both extracts increased bone mineralization in zebrafish and upregulated the expression of genes involved in bone formation (sp7, col1a1a, oc1, and oc2), bone remodeling (acp5a), and antioxidant defenses (cat, sod1). Extracts also improved the skeletal status of zebrafish juveniles by reducing the incidence of skeletal anomalies. Our results indicate that both strains of microalgae contain osteogenic and mineralogenic compounds, and that ethanolic extracts have the potential for an application in the aquaculture sector as dietary supplements to support fish bone health. Future studies should also identify osteoactive compounds and establish whether they can be used in human health to broaden the therapeutic options for bone erosive disorders such as osteoporosis.

Synthesis, Purity Check, Hydrolysis and Removal of o-Chlorobenzyliden Malononitrile (CBM) by Biological Selective Media

The removal yield of organic substances present in water depends on the environmental conditions, on the chemical composition of the water and on the chemical substance dissolved in the water, which constitutes the substrate of the metabolic activities of the microalgae that use these substances in the biochemical reactions of cellular enzyme complexes. o-Chlorobenzylidene malononitrile (CS, to use its military designation) was synthesized in-house, for research purposes, by a condensing reaction between o-chlorobenzaldehide and malononitrilein the presence of diethylamine. The detection, identification and confirmation of o-chlorobenzylidenemalononitrile (coded CBM in this experimental study) was performed using gas chromatography-mass spectrometry (GC-MS) and the purity of CBM was 99%. The biodegradation capacity in the samples that contained the biological suspension, after 24 h and 96 h of incubation, was determined via GC-MS analysis, and no evidence of the presence of CBM or some metabolites of CBM was detected. In the parallel samples, a hydrolysis process of CBM at room temperature, without biological treatment, revealed two main metabolites, malononitrile and o-chlorobenzaldehyde, respectively. This study is focused on evaluating the biodegradation capacity of o-chlorobenzylidene malononitrile in the presence of a biological material, culture of Chlorella sp., in comparison with a classical hydrolysis process. The tests performed indicate that the suspension of Chlorella sp. consumed the entire amount of CBM and metabolites from the analyzed samples. The tests prove that the biological material can be used to decontaminate the affected areas.

Dietary Supplementation of Chlorella vulgaris Effectively Enhanced the Intestinal Antioxidant Capacity and Immune Status of Micropterus salmoides

An M. salmoides fish meal diet was supplemented with 0 (CHL0, Control), 38 (CHL38), 76 (CHL76), 114 (CHL114), and 152 (CHL152) mg/kg C. vulgaris for 60 days, and their serum and intestinal samples were analyzed. The results showed that the albumin (ALB) and total protein (TP) contents were observably enhanced in the CHL76 group compared with the Control group. The intestinal glutathione (GSH) and glutathione peroxidase (GSH-Px) contents were enhanced significantly in the CHL76 group, while the total antioxidant capacity (T-AOC) was enhanced in the CHL38 group, compared with the Control group. However, supplementation of >76 g/kg C. vulgaris significantly inhibited the superoxide dismutase (SOD) activity in the intestines of M. salmoides. Moreover, the malondialdehyde (MDA) content was observably dropped in the CHL-supplemented groups compared with the Control group. Transcriptome analysis of the CHL76 and Control groups displayed a total of 1384 differentially expressed genes (DEGs). KEGG analysis revealed that these DEGs were enriched in apoptosis, cytokine-cytokine receptor interaction, tight junction (TJ), and phagosome signaling pathways, which were associated with improved intestinal immunity in the CHL76 group. Additionally, the DEGs enriched in the above pathways were also correlated with the antioxidant parameters, such as catalase (CAT), GSH, GSH-Px, SOD, T-AOC, and MDA. Therefore, our study found that dietary supplementation of C. vulgaris effectively enhanced the intestinal antioxidant capacity of M. salmoides by increasing antioxidant enzyme activity and decreasing MDA content. Additionally, dietary supplementation of C. vulgaris improved the intestinal immune status of M. salmoides by reducing proapoptotic and proinflammatory factors, increasing intestinal TJs- and phagosome-related genes expressions, and increasing the serum ALB and TP contents. Lastly, quadratic regression analysis of the serum biochemical indices (ALB and TP) and intestinal antioxidant parameters (GSH-Px and GSH) revealed that the optimal supplemental level of C. vulgaris in the M. salmoides diet was 58.25-77.7 g/kg.

Site-specific gene knock-in and bacterial phytase gene expression in Chlamydomonas reinhardtii via Cas9 RNP-mediated HDR

In the present study, we applied the HDR (homology-directed DNA repair) CRISPR-Cas9-mediated knock-in system to accurately insert an optimized foreign bacterial phytase gene at a specific site of the nitrate reductase (NR) gene (exon 2) to achieve homologous recombination with the stability of the transgene and reduce insertion site effects or gene silencing. To this end, we successfully knocked-in the targeted NR gene of Chlamydomonas reinhardtii using the bacterial phytase gene cassette through direct delivery of the CRISPR/Cas9 system as the ribonucleoprotein (RNP) complex consisting of Cas9 protein and the specific single guide RNAs (sgRNAs). The NR insertion site editing was confirmed by PCR and sequencing of the transgene positive clones. Moreover, 24 clones with correct editing were obtained, where the phytase gene cassette was located in exon 2 of the NR gene, and the editing efficiency was determined to be 14.81%. Additionally, site-specific gene expression was analyzed and confirmed using RT-qPCR. Cultivation of the positive knocked-in colonies on the selective media during 10 generations indicated the stability of the correct editing without gene silencing or negative insertion site effects. Our results demonstrated that CRISPR-Cas9-mediated knock-in could be applied for nuclear expression of the heterologous gene of interest, and also confirmed its efficacy as an effective tool for site-specific gene knock-in, avoiding nuclear positional effects and gene silencing in C. reinhardtii. These findings could also provide a new perspective on the advantageous application of RNP-CRISPR/Cas9 gene-editing to accelerate the commercial production of complex recombinant proteins in the food-grade organism "C. reinhardtii".

Biodegradation efficacy of selected marine microalgae against Low-Density Polyethylene (LDPE): An environment friendly green approach

The present study dealt with the five marine microalgae strains viz., Chloroidium saccharophilum, Picochlorum maculatum, Amphora sp., Hymenomonas globosa and Limnospira indica and their effective degradation ability of Low-Density Polyethylene for the period of 45 days. The incubation of LDPE in microalgae culture has resulted in the maximum weight loss (20.16 ± 0.14 %), higher reduction rate (0.005/day) and lower half-life (138.4 days) in the LDPE treated with P. maculatum. The SEM images of all treated LDPE revealed surface erosion and the ATR-FTIR spectra showed functional group peaks along with new peaks at 1369.35 cm^-1, 2332.96 cm^-1 and 500-726 cm^-1. Carbonyl (Keto, Ester), Vinyl and Internal double bond indices increased significantly in all the treated groups. The crystallinity was decreased (64.13 %) in P. maculatum treated LDPE than the control (71.37 %). Thermogravimetric analysis showed the reduction in thermal stability after biodegradation. This efficient microalgal degradation as a bioremediation technique will reduce the plastic pollution.

Edible microalgae: potential candidate for developing edible vaccines

Infectious diseases are always a threat to all living beings. Today, in this world pathogens have no difficulty reaching anywhere. Every year new and deadly diseases are born and most of them are caused by viruses. Vaccines can provide lifelong immunity against infectious diseases, but the production cost of vaccines is unaffordable for a layman and traditional vaccines have certain limitations with storage and delivery. However, edible vaccines have shifted this paradigm and have received acceptance all over the world, especially in developing countries. Microalgae are one of the potential candidates for developing edible vaccines. Modifying microalgae as edible vaccines are gaining worldwide attention, especially in the world of science. Microalgae can augment the immune system as they are a promising source for antigen carriers and many of them are regarded as safe to eat. Moreover, they are a pantry of proteins, vitamins, minerals, and other secondary metabolites like alkaloids, phenols, and terpenes. In addition, being resistant to animal pathogens they are less sophisticated for genetic modification. This review analyses the potential scope of microalgae as an edible vaccine source.

Hypes, hopes, and the way forward for microalgal biotechnology

The urge for food security and sustainability has advanced the field of microalgal biotechnology. Microalgae are microorganisms able to grow using (sun)light, fertilizers, sugars, CO₂, and seawater. They have high potential as a feedstock for food, feed, energy, and chemicals. Microalgae grow faster and have higher areal productivity than plant crops, without competing for agricultural land and with 100% efficiency uptake of fertilizers. In comparison with bacterial, fungal, and yeast single-cell protein production, based on hydrogen or sugar, microalgae show higher land-use efficiency. New insights are provided regarding the potential of microalgae replacing soy protein, fish oil, and palm oil and being used as cell factories in modern industrial biotechnology to produce designer feed, recombinant proteins, biopharmaceuticals, and vaccines.

Extraction of Valuable Biomolecules from the Microalga Haematococcus pluvialis Assisted by Electrotechnologies

The freshwater microalga Haematococcus pluvialis is well known as the cell factory for natural astaxanthin, which composes up to 4-7% of its total dry weight. The bioaccumulation of astaxanthin in H. pluvialis cysts seems to be a very complex process that depends on different stress conditions during its cultivation. The red cysts of H. pluvialis develop thick and rigid cell walls under stress growing conditions. Thus, the biomolecule extraction requires general cell disruption technologies to reach a high recovery rate. This short review provides an analysis of the different steps in H. pluvialis's up and downstream processing including cultivation and harvesting of biomass, cell disruption, extraction and purification techniques. Useful information on the structure of H. pluvialis's cells, biomolecular composition and properties and the bioactivity of astaxanthin is collected. Special emphasis is given to the recent progress in application of different electrotechnologies during the growth stages and for assistance of the recovery of different biomolecules from H. pluvialis.

Application of ionizing radiation as an elicitor to enhance the growth and metabolic activities in Chlamydomonas reinhardtii

Chlamydomonas reinhardtii is a eukaryotic, unicellular photosynthetic organism and a potential algal platform for producing biomass and recombinant proteins for industrial use. Ionizing radiation is a potent genotoxic and mutagenic agent used for algal mutation breeding that induces various DNA damage and repair responses. In this study, however, we explored the counterintuitive bioeffects of ionizing radiation, such as X- and γ-rays, and its potential as an elicitor to facilitate batch or fed-batch cultivation of Chlamydomonas cells. A certain dose range of X- and γ-rays was shown to stimulate the growth and metabolite production of Chlamydomonas cells. X- or γ-irradiation with relatively low doses below 10 Gy substantially increased chlorophyll, protein, starch, and lipid content as well as growth and photosynthetic activity in Chlamydomonas cells without inducing apoptotic cell death. Transcriptome analysis demonstrated the radiation-induced changes in DNA damage response (DDR) and various metabolic pathways with the dose-dependent expression of some DDR genes, such as CrRPA30, CrFEN1, CrKU, CrRAD51, CrOASTL2, CrGST2, and CrRPA70A. However, the overall transcriptomic changes were not causally associated with growth stimulation and/or enhanced metabolic activities. Nevertheless, the radiation-induced growth stimulation was strongly enhanced by repetitive X-irradiation and/or subsequent cultivation with an inorganic carbon source, i.e., NaHCO3, but was significantly inhibited by treatment of ascorbic acid, a scavenger of reactive oxygen species (ROS). The optimal dose range of X-irradiation for growth stimulation differed by genotype and radiation sensitivity. Here, we suggest that ionizing radiation within a certain dose range determined by genotype-dependent radiation sensitivity could induce growth stimulation and enhance metabolic activities, including photosynthesis, chlorophyll, protein, starch, and lipid synthesis in Chlamydomonas cells via ROS signaling. The counterintuitive benefits of a genotoxic and abiotic stress factor, i.e., ionizing radiation, in a unicellular algal organism, i.e., Chlamydomonas, may be explained by epigenetic stress memory or priming effects associated with ROS-mediated metabolic remodeling.

Biotechnological methods to remove microplastics: a review

Microplastics pollution is major threat to ecosystems and is impacting abiotic and biotic components. Microplastics are diverse and highly complex contaminants that transport other contaminants and microbes. Current methods to remove microplastics include biodegradation, incineration, landfilling, and recycling. Here we review microplastics with focus on sources, toxicity, and biodegradation. We discuss the role of algae, fungi, bacteria in the biodegradation, and we present biotechnological methods to enhance degradation, e.g., gene editing tools and bioinformatics.

Chlamydomonas reinhardtii: A Factory of Nutraceutical and Food Supplements for Human Health

Chlamydomonas reinhardtii (C. reinhardtii) is one of the most well-studied microalgae organisms that revealed important information for the photosynthetic and metabolic processes of plants and eukaryotes. Numerous extensive studies have also underpinned its great potential as a biochemical factory, capable of producing various highly desired molecules with a direct impact on human health and longevity. Polysaccharides, lipids, functional proteins, pigments, hormones, vaccines, and antibodies are among the valuable biomolecules that are produced spontaneously or under well-defined conditions by C. reinhardtii and can be directly linked to human nutrition and diet. The aim of this review is to highlight the recent advances in the field focusing on the most relevant applications related to the production of important biomolecules for human health that are also linked with human nutrition and diet. The limitations and challenges are critically discussed along with the potential future applications of C. reinhardtii biomass and processed products in the field of nutraceuticals and food supplements. The increasing need for high-value and low-cost biomolecules produced in an environmentally and economy sustainable manner also underline the important role of C. reinhardtii.

Production of Recombinant Biopharmaceuticals in Chlamydomonas reinhardtii

This review aimed to present Chlamydomonas reinhardtii as an alternative for heterologous protein production, especially for biopharmaceuticals, and its general characteristics when compared with other expression systems. The need to produce heterologous proteins for industrial interest, therapeutic ends, and diagnostic kits has led to the development of recombinant microalgal technology. This technology presents some interesting features, such as rapid growth and low transgene dispersion compared to plants, the ability to fold complex proteins compared to bacteria, and low production costs compared to other expression systems, such as yeast and mammalian cells. Overall, C. reinhardtii heterologous protein expression is coming of age with several research groups focused on developing an optimal producer strain.

Microalgae in Terms of Biomedical Technology: Probiotics, Prebiotics, and Metabiotics

Green, red, brown, and diatomic algae, as well as cyanobacteria, have been in the focus of attention of scientists and technologists for over 5 decades. This is due to their importance as efficient and economical producers of food additives, cosmetics, pharmaceuticals, biofertilizers, biofuels, and wastewater bioremediation agents. Recently, the role of microalgae has increasingly been considered in terms of their probiotic function, i.e., of their ability to normalize the functioning of the microbiota of humans and agricultural animals and to produce biologically active substances, including hormones, neurotransmitters, and immunostimulators. A separate brief subsection of the review deals with the potential functions of microalgae with respect to the brain and psyche, i.e., as psychobiotics. Moreover, algal polysaccharides and some other compounds can be broken down to short fragments that will stimulate the development of useful intestinal microorganisms, i.e., function as efficient prebiotics. Finally, many components of microalgal cells and chemical agents produced by them can exert important health-promoting effects per se, which indicates that they are as potentially valuable metabiotics (the term preferred by late Prof. B.A. Shenderov), which are alternatively denoted as postbiotics in the literature.

Effective removal of the rotifer Brachionus calyciflorus from a Chlorella vulgaris microalgal culture by homogeneous solar photo-Fenton at neutral pH

In this study, a citrate-modified photo-Fenton process was successfully applied to decontaminate a Chlorella vulgaris microalgae culture spiked with the rotifer Brachionus calyciflorus (5 individuals mL^-1). The applied treatment (1 mg L^-1 Fe²⁺, 20 mg L^-1 H₂O₂, 17.5 mg L^-1 citric acid) had only moderate effects on viability and regrowth of the microalgae since, after a short post-treatment delay of a few days, they reached final cell densities similar to that obtained for microalgae cultures that were not spiked. The decontamination was effective as no regrowth of rotifers was observed in the microalgae cultures after treatment. The efficacy of the citrate-modified photo-Fenton treatment was also studied with a higher starting concentration of 20 rotifers mL^-1 and was compared with a solar light/H₂O₂ treatment. Results show that both treatments had similar efficacies on the rotifer elimination, but that the citrate-modified photo-Fenton treatment had a lower negative impact on the regrowth of microalgae than the solar light/H₂O₂ treatment. However, when microalgae cultures were spiked with 20 rotifers mL^-1, rotifers were only partially inactivated and post-treatment regrowth occurred, which highlights the importance to apply the photo-Fenton process at an early stage of a contamination to achieve full rotifer elimination. In any case, a contamination with 5 rotifers mL^-1 is already a significant threat as numbers above 1000 rotifers mL^-1 were reached after 14 days and caused the microalgae culture to fail. Overall, our treatment suggests that the citrate-modified solar photo-Fenton process is an environmentally friendly solution to support the maintenance of contaminant-free microalgal cultures.

Production of a viral surface protein in Nannochloropsis oceanica for fish vaccination against infectious pancreatic necrosis virus

Nannochloropsis oceanica is a unicellular oleaginous microalga of emerging biotechnological interest with a sequenced, annotated genome, available transcriptomic and proteomic data, and well-established basic molecular tools for genetic engineering. To establish N. oceanica as a eukaryotic host for recombinant protein synthesis and develop molecular technology for vaccine production, we chose the viral surface protein 2 (VP2) of a pathogenic fish virus that causes infectious pancreatic necrosis as a model vaccine. Upon stable nuclear transformation of N. oceanica strain CCMP1779 with the codon-optimized VP2 gene, a Venus reporter fusion served to evaluate the strength of different endogenous promoters in transformant populations by qPCR and flow cytometry. The highest VP2 yields were achieved for the elongation factor promoter, with enhancer effects by its N-terminal leader sequence. Individual transformants differed in their production capability of reporter-free VP2 by orders of magnitude. When subjecting the best candidates to kinetic analyses of growth and VP2 production in photobioreactors, recombinant protein integrity was maintained until the early stationary growth phase, and a high yield of 4.4% VP2 of total soluble protein was achieved. The maximum yield correlated with multiple integrations of the expression vector into the nuclear genome. The results demonstrate that N. oceanica was successfully engineered to constitute a robust platform for high-level production of a model subunit vaccine. The molecular methodology established here can likely be adapted in a straightforward manner to the production of further vaccines in the same host, allowing their distribution to fish, vertebrates, or humans via a microalgae-containing diet. KEY POINTS: • We engineered N. oceanica for recombinant protein production. • The antigenic surface protein 2 of IPN virus could indeed be expressed in the host. • A high yield of 4.4% VP2 of total soluble protein was achieved in N. oceanica.

Fungal- and Algal-Derived Synthesis of Various Nanoparticles and Their Applications

Nanoparticles synthesis through biological mediated methods with a particular focus on the processes mediated by fungi and algae is discussed, which systematically reviews nanoparticle characterization, composition, synthesis methods, and, lastly but not least, the applications of NPs across five different categories to provide a reference for future research. Most traditional methods to generate nanoparticles have certain limitations, like the toxicity of precursor materials, the need for high-temperature management, and the high cost of synthesis, which ultimately hinders their utility in sectors. Greener synthesis through fungus and algae done through bioreduction by biomolecules or enzymes present in them is low-energy, low-cost, and needs a low-temperature environment, providing a unique technique for the manufacture of various metallic nanoparticles utilized in an array of industries and healthcare.

Microalgae Bioactive Compounds to Topical Applications Products-A Review

Microalgae are complex photosynthetic organisms found in marine and freshwater environments that produce valuable metabolites. Microalgae-derived metabolites have gained remarkable attention in different industrial biotechnological processes and pharmaceutical and cosmetic industries due to their multiple properties, including antioxidant, anti-aging, anti-cancer, phycoimmunomodulatory, anti-inflammatory, and antimicrobial activities. These properties are recognized as promising components for state-of-the-art cosmetics and cosmeceutical formulations. Efforts are being made to develop natural, non-toxic, and environmentally friendly products that replace synthetic products. This review summarizes some potential cosmeceutical applications of microalgae-derived biomolecules, their mechanisms of action, and extraction methods.

Emerging Trends in Genetic Engineering of Microalgae for Commercial Applications

Recently, microalgal biotechnology has received increasing interests in producing valuable, sustainable and environmentally friendly bioproducts. The development of economically viable production processes entails resolving certain limitations of microalgal biotechnology, and fast evolving genetic engineering technologies have emerged as new tools to overcome these limitations. This review provides a synopsis of recent progress, current trends and emerging approaches of genetic engineering of microalgae for commercial applications, including production of pharmaceutical protein, lipid, carotenoids and biohydrogen, etc. Photochemistry improvement in microalgae and CO2 sequestration by microalgae via genetic engineering were also discussed since these subjects are closely entangled with commercial production of the above mentioned products. Although genetic engineering of microalgae is proved to be very effective in boosting performance of production in laboratory conditions, only limited success was achieved to be applicable to industry so far. With genetic engineering technologies advancing rapidly and intensive investigations going on, more bioproducts are expected to be produced by genetically modified microalgae and even much more to be prospected.

Comparison of Auxenochlorella protothecoides and Chlorella spp. Chloroplast Genomes: Evidence for Endosymbiosis and Horizontal Virus-like Gene Transfer

Resequencing of the chloroplast genome (cpDNA) of Auxenochlorella protothecoides UTEX 25 was completed (GenBank Accession no. KC631634.1), revealing a genome size of 84,576 base pairs and 30.8% GC content, consistent with features reported for the previously sequenced A. protothecoides 0710, (GenBank Accession no. KC843975). The A. protothecoides UTEX 25 cpDNA encoded 78 predicted open reading frames, 32 tRNAs, and 4 rRNAs, making it smaller and more compact than the cpDNA genome of C. variabilis (124,579 bp) and C. vulgaris (150,613 bp). By comparison, the compact genome size of A. protothecoides was attributable primarily to a lower intergenic sequence content. The cpDNA coding regions of all known Chlorella species were found to be organized in conserved colinear blocks, with some rearrangements. The Auxenochlorella and Chlorella species genome structure and composition were similar, and of particular interest were genes influencing photosynthetic efficiency, i.e., chlorophyll synthesis and photosystem subunit I and II genes, consistent with other biofuel species of interest. Phylogenetic analysis revealed that Prototheca cutis is the closest known A. protothecoides relative, followed by members of the genus Chlorella. The cpDNA of A. protothecoides encodes 37 genes that are highly homologous to representative cyanobacteria species, including rrn16, rrn23, and psbA, corroborating a well-recognized symbiosis. Several putative coding regions were identified that shared high nucleotide sequence identity with virus-like sequences, suggestive of horizontal gene transfer. Despite these predictions, no corresponding transcripts were obtained by RT-PCR amplification, indicating they are unlikely to be expressed in the extant lineage.

Coelastrella terrestris for Adonixanthin Production: Physiological Characterization and Evaluation of Secondary Carotenoid Productivity

A novel strain of Coelastrella terrestris (Chlorophyta) was collected from red mucilage in a glacier foreland in Iceland. Its morphology showed characteristic single, ellipsoidal cells with apical wart-like wall thickenings. Physiological characterization revealed the presence of the rare keto-carotenoid adonixanthin, as well as high levels of unsaturated fatty acids of up to 85%. Initial screening experiments with different carbon sources for accelerated mixotrophic biomass growth were done. Consequently, a scale up to 1.25 L stirred photobioreactor cultivations yielded a maximum of 1.96 mg·L-1 adonixanthin in free and esterified forms. It could be shown that supplementing acetate to the medium increased the volumetric productivity after entering the nitrogen limitation phase compared to autotrophic control cultures. This study describes a promising way of biotechnological adonixanthin production using Coelastrella terrestris.

Algae and Their Metabolites as Potential Bio-Pesticides

An increasing human population necessitates more food production, yet current techniques in agriculture, such as chemical pesticide use, have negative impacts on the ecosystems and strong public opposition. Alternatives to synthetic pesticides should be safe for humans, the environment, and be sustainable. Extremely diverse ecological niches and millions of years of competition have shaped the genomes of algae to produce a myriad of substances that may serve humans in various biotechnological areas. Among the thousands of described algal species, only a small number have been investigated for valuable metabolites, yet these revealed the potential of algal metabolites as bio-pesticides. This review focuses on macroalgae and microalgae (including cyanobacteria) and their extracts or purified compounds, that have proven to be effective antibacterial, antiviral, antifungal, nematocides, insecticides, herbicides, and plant growth stimulants. Moreover, the mechanisms of action of the majority of these metabolites against plant pests are thoroughly discussed. The available information demonstrated herbicidal activities via inhibition of photosynthesis, antimicrobial activities via induction of plant defense responses, inhibition of quorum sensing and blocking virus entry, and insecticidal activities via neurotoxicity. The discovery of antimetabolites also seems to hold great potential as one recent example showed antimicrobial and herbicidal properties. Algae, especially microalgae, represent a vast untapped resource for discovering novel and safe biopesticide compounds.

Recombinant Protein Production and Purification of Insoluble Proteins

Proteins are synthesized in heterologous systems because of the impossibility to obtain satisfactory yields from natural sources. The efficient production of soluble and functional recombinant proteins is among the main goals in the biotechnological field. In this context, it is important to point out that under stress conditions, protein folding machinery is saturated and this promotes protein misfolding and, consequently, protein aggregation. Thus, the selection of the optimal expression organism and its growth conditions to minimize the formation of insoluble protein aggregates should be done according to the protein characteristics and downstream requirements. Escherichia coli is the most popular recombinant protein expression system despite the great development achieved so far by eukaryotic expression systems. Besides, other prokaryotic expression systems, such as lactic acid bacteria and psychrophilic bacteria, are gaining interest in this field. However, it is worth mentioning that prokaryotic expression system poses, in many cases, severe restrictions for a successful heterologous protein production. Thus, eukaryotic systems such as mammalian cells, insect cells, yeast, filamentous fungus, and microalgae are an interesting alternative for the production of these difficult-to-express proteins.

Recent Advancements and Future Perspectives of Microalgae-Derived Pharmaceuticals

Microalgal cells serve as solar-powered factories that produce pharmaceuticals, recombinant proteins (vaccines and drugs), and valuable natural byproducts that possess medicinal properties. The main advantages of microalgae as cell factories can be summarized as follows: they are fueled by photosynthesis, are carbon dioxide-neutral, have rapid growth rates, are robust, have low-cost cultivation, are easily scalable, pose no risk of human pathogenic contamination, and their valuable natural byproducts can be further processed. Despite their potential, there are many technical hurdles that need to be overcome before the commercial production of microalgal pharmaceuticals, and extensive studies regarding their impact on human health must still be conducted and the results evaluated. Clearly, much work remains to be done before microalgae can be used in the large-scale commercial production of pharmaceuticals. This review focuses on recent advancements in microalgal biotechnology and its future perspectives.

Potential Use of Microbial Enzymes for the Conversion of Plastic Waste Into Value-Added Products: A Viable Solution

The widespread use of commercial polymers composed of a mixture of polylactic acid and polyethene terephthalate (PLA-PET) in bottles and other packaging materials has caused a massive environmental crisis. The valorization of these contaminants via cost-effective technologies is urgently needed to achieve a circular economy. The enzymatic hydrolysis of PLA-PET contaminants plays a vital role in environmentally friendly strategies for plastic waste recycling and degradation. In this review, the potential roles of microbial enzymes for solving this critical problem are highlighted. Various enzymes involved in PLA-PET recycling and bioconversion, such as PETase and MHETase produced by Ideonella sakaiensis; esterases produced by Bacillus and Nocardia; lipases produced by Thermomyces lanuginosus, Candida antarctica, Triticum aestivum, and Burkholderia spp.; and leaf-branch compost cutinases are critically discussed. Strategies for the utilization of PLA-PET's carbon content as C1 building blocks were investigated for the production of new plastic monomers and different value-added products, such as cyclic acetals, 1,3-propanediol, and vanillin. The bioconversion of PET-PLA degradation monomers to polyhydroxyalkanoate biopolymers by Pseudomonas and Halomonas strains was addressed in detail. Different solutions to the production of biodegradable plastics from food waste, agricultural residues, and polyhydroxybutyrate (PHB)-accumulating bacteria were discussed. Fuel oil production via PLA-PET thermal pyrolysis and possible hybrid integration techniques for the incorporation of thermostable plastic degradation enzymes for the conversion into fuel oil is explained in detail.

Study on Spirulina platensis growth employing non-linear analysis of biomass kinetic models

Spirulina platensis has been considered a promising source of food supplement to combat malnutrition worldwide. Numerous investigations have stated its immune activity, ability to absorb CO2 during the growth period, and antioxidant potential. Well-known theoretical biomass kinetic model sheds are capable of qualitative analysis of the fast microalgae growth. In this regard, we considered eight popular biomass models: Monod, Haldane, Andrews & Noack, Teissier, Hinshelwood, Yano & Koga, Webb and, Aiba model comprising analytical investigation within the numerical simulation. Besides, in this study, we establish a new mathematical biomass growth model by merging the well-known Hinshelwood and Yano & Koga models. We explored the most suitable Spirulina growth model to minimize the overstated and understated growth trends in the assorted eight biomass kinetic models. Our findings show microalgae biomass growth and substrate diminishes along with time, and these results were compared with available experimental data. Results present a high value of R2(0.9862), a low value of RSS (0.0813), AIC (-9.7277), and BIC (-8.2148) implied significantly fitted with the investigated data for the growth of Spirulina platensis compared with popular eight studied models.

Microalgae biofilm formation and antioxidant responses to stress induce by Lemna minor L., Chlorella vulgaris, and Aphanizomenon flos-aquae

The study shows how microalgae biofilm formation and antioxidant responses to the production of reactive oxygen species (ROS) is alter by the presences of Lemna minor L., Chlorella vulgaris, and Aphanizomenon flos-aquae. The study involves the cultivation of the biofilm of Chlorella vulgaris and Aphanizomenon flos-aquae in three bioreactors. The condition of growth for the biofilm formation was varied across the three bioreactors to enable the dominance Chlorella vulgaris and Aphanizomenon flos-aquae in one of the bioreactors. Lemna minor L. was also introduce into one of the bioreactors to determine its effect on the biofilm formation. The result obtained shows that C. vulgaris and A. flos-aquae dominate the biofilm, resulting in a high level of H₂O₂ and O₂^- (H₂O₂ was 0.122 ± 0.052 and 0.183 ± 0.108 mmol/L in C. vulgaris and A. flos-aquae, respectively, and O₂^- was 0.261 ± 0.039 and 0.251 ± 0.148 mmol/L in C. vulgaris and A. flos-aquae, respectively). The study also revealed that the presence of L. minor L. tend to reduce the oxidative stress to the biofilm leading to low production of ROS (H₂O₂ was 0.086 ± 0.027 and 0.089 ± 0.045 mmol/L in C. vulgaris and A. flos-aquae respectively, and O₂^- was 0.185 ± 0.044 and 0.161 ± 0.065 mmol/L in C. vulgaris and A. flos-aquae respectively). The variation in the ability of the biofilm of C. vulgaris and A. flos-aquae to respond via chlorophyll, carotenoid, flavonoid, anthocyanin, superoxide dismutase, peroxidase, catalase, glutathione reductase activities, antioxidant reducing power, phosphomolybdate activity, DPPH reduction activity, H₂O₂ scavenging activity, lipid content and organic carbon also supports the fact that the presence of biomass of microalgae and aquatic macrophytes tend to affect the process of microalgae biofilm formation and the ability of the biofilm to produce antioxidant. This high nutrient utilization leads to the production of biomass which can be used for biofuel production and other biotechnological products.

Bioactive substances and potentiality of marine microalgae

Microalgae is one of the most important components in the aquatic ecosystem, and they are increasingly used in food and medicine production for human consumption due to their rapid growth cycle and survival ability in the harsh environment. Now, the exploration of microalgae has been gradually deepening, mainly focused on the field of nutrition, medicine, and cosmetics. A great deal of studies has shown that microalgae have a variety of functions in regulating the body health and preventing disease, such as nitrogen fixation, antitumor, antivirus, antioxidation, anti-inflammatory, and antithrombotic. Furthermore, microalgae can synthesize various high-valued bioactive substances, such as proteins, lipids, polysaccharides, and pigments. In this paper, we have briefly reviewed the research progress of main bioactive components in microalgae, proteins, lipids, polysaccharides, pigments, and other nutrients included, as well as their present application situation. This paper can provide the guidance for research and development of industrial production of microalgae.

Advanced Applications for Protein and Compounds from Microalgae

Algal species still show unrevealed and unexplored potentiality for the identification of new compounds. Photosynthetic organisms represent a valuable resource to exploit and sustain the urgent need of sustainable and green technologies. Particularly, unconventional organisms from extreme environments could hide properties to be employed in a wide range of biotechnology applications, due to their peculiar alleles, proteins, and molecules. In this review we report a detailed dissection about the latest and advanced applications of protein derived from algae. Furthermore, the innovative use of modified algae as bio-reactors to generate proteins or bioactive compounds was discussed. The latest progress about pharmaceutical applications, including the possibility to obtain drugs to counteract virus (as SARS-CoV-2) were also examined. The last paragraph will survey recent cases of the utilization of extremophiles as bio-factories for specific protein and molecule production.

Plastic wastes biodegradation: Mechanisms, challenges and future prospects

The growing accumulation of plastic wastes is one of the main environmental challenges currently faced by modern societies. These wastes are considered a serious global problem because of their effects on all forms of life. There is thus an urgent need to demonstrate effective eco-environmental techniques to overcome the hazardous environmental impacts of traditional disposal paths. However, our current knowledge on the prevailing mechanisms and the efficacy of synthetic plastics' biodegradation still appears limited. Under this scope, our review aims to comprehensively highlight the role of microbes, with special emphasis on algae, on the entire plastic biodegradation process focusing on the depolarization of various synthetic plastic types. Moreover, our review emphasizes on the ability of insects' gut microbial consortium to degrade synthetic plastic wastes. In this view, we discuss the schematic pathway of the biodegradation process of six types of synthetic plastics. These findings may contribute to establishing bio-upcycling processes of plastic wastes towards biosynthesis of valuable metabolic products. Finally, we discuss the challenges and opportunities for microbial valorization of degraded plastic wastes.

Efficient Transient Expression of Recombinant Proteins Using DNA Viral Vectors in Freshwater Microalgal Species

The increase in the world population, the advent of new infections and health issues, and the scarcity of natural biological products have spotlighted the importance of recombinant protein technology and its large-scale production in a cost-effective manner. Microalgae have become a significant promising platform with the potential to meet the increasing demand for recombinant proteins and other biologicals. Microalgae are safe organisms that can grow rapidly and are easily cultivated with basic nutrient requirements. Although continuous efforts have led to considerable progress in the algae genetic engineering field, there are still many hurdles to overcome before these microorganisms emerge as a mature expression system. Hence, there is a need to develop efficient expression approaches to exploit microalgae for the production of recombinant proteins at convenient yields. This study aimed to test the ability of the DNA geminiviral vector with Rep-mediated replication to transiently express recombinant proteins in the freshwater microalgal species Chlamydomonas reinhardtii and Chlorella vulgaris using Agrobacterium-mediated transformation. The SARS-CoV-2 receptor binding domain (RBD) and basic fibroblast growth factor (bFGF) are representative antigen proteins and growth factor proteins, respectively, that were subcloned in a geminiviral vector and were used for nuclear transformation to transiently express these proteins in C. reinhardtii and C. vulgaris. The results showed that the geminiviral vector allowed the expression of both recombinant proteins in both algal species, with yields at 48 h posttransformation of up to 1.14 μg/g RBD and 1.61 ng/g FGF in C. vulgaris and 1.61 μg/g RBD and 1.025 ng/g FGF in C. reinhardtii. Thus, this study provides a proof of concept for the use of DNA viral vectors for the simple, rapid, and efficient production of recombinant proteins that repress the difficulties faced in the genetic transformation of these unicellular green microalgae. This concept opens an avenue to explore and optimize green microalgae as an ideal economically valuable platform for the production of therapeutic and industrially relevant recombinant proteins in shorter time periods with significant yields.