Preparation and In Vitro/In Vivo Characterization of Polymeric Nanoparticles Containing Methotrexate to Improve Lymphatic Delivery

Development of pH-Sensitive Nanoparticle Incorporated into Dissolving Microarray Patch for Selective Delivery of Methotrexate

PURPOSE

Rheumatoid arthritis (RA) is a systemic autoimmune disease that attacks human joints. Methotrexate (MTX), as one the most effective medications to treat RA, has limitations when administered either orally or by injection. To overcome this limitation, we formulated MTX through a smart nanoparticle (SNP) combined with dissolving microarray patch (DMAP) to achieve selective-targeted delivery of RA.

METHODS

SNP was made using the combination of polyethylene glycol (PEG) and polycaprolactone (PCL) polymers, while DMAP was made using the combination of hyaluronic acid and polyvinylpyrrolidone K-30. SNP-DMAP was then evaluated for its mechanical and chemical characteristics, ex vivo permeation test, in vivo pharmacokinetic study, hemolysis, and hen's egg test-chorioallantoic membrane (HET-CAM) test.

RESULT

The results showed that the characteristics of the SNP-DMAP-MTX formulas meet the requirements for transdermal delivery, with the particle size of 189.09 ±12.30 nm and absorption efficiency of 65.40 ± 5.0%. The hemolysis and HET-CAM testing indicate that this formula was non-toxic and non-irritating. Ex vivo permeation shows a concentration of 51.50 ± 3.20 µg/mL of SNP-DMAP-MTX in PBS pH 5.0. The pharmacokinetic profile of SNP-DMAP-MTX showed selectivity and sustained release compared with oral and DMAP-MTX with values of t1/2 (4.88 ± 0 h), Tmax (8 ± 0 h), Cmax (0.50 ± 0.04 μg/mL), AUC (3.15 ± 0.54 μg/mL.h), and mean residence time (MRT) (9.13 ± 0 h).

CONCLUSION

The developed SNP-DMAP-MTX has been proven to deliver MTX transdermal and selectively at the RA site, potentially avoiding conventional MTX side effects and enhancing the effectiveness of RA therapy.

Chiral Supramolecular Hydrogel Enhanced Transdermal Delivery of Sodium Aescinate to Modulate M1 Macrophage Polarization Against Lymphedema

Sodium aescinate (SA) shows great potential for treating lymphedema since it can regulate the expression of cytokines in M1 macrophages, however, it is commonly administered intravenously in clinical practice and often accompanied by severe toxic side effects and short metabolic cycles. Herein, SA-loaded chiral supramolecular hydrogels are prepared to prove the curative effects of SA on lymphedema and enhance its safety and transdermal transmission efficiency. In vitro studies demonstrate that SA- loaded chiral supramolecular hydrogels can modulate local immune responses by inhibiting M1 macrophage polarization. Typically, these chiral hydrogels can significantly increase the permeability of SA with good biocompatibility due to the high enantioselectivity between chiral gelators and stratum corneum and L-type hydrogels are found to have preferable drug penetration over D-type hydrogels. In vivo studies show that topical delivery of SA via chiral hydrogels results in dramatic therapeutic effects on lymphedema. Specifically, it can downregulate the level of inflammatory cytokines, reduce the development of fibrosis, and promote the regeneration of lymphatic vessels. This study initiates the use of SA for lymphedema treatment and for the creation of an effective chiral biological platform for improved topical administration.

Formulation of a dual drug-loaded nanoparticulate co-delivery hydrogel system and its validation in rheumatoid arthritis animal model

Rheumatoid arthritis (RA), a systemic autoimmune disease that dramatically affects patients' quality of life. Given the intricacy of RA's pathophysiology, no single treatment can completely halt the disease progression. Here, we attempted to treat RA holistically and synergistically by co-delivering methotrexate (MTX), a standard slow-acting anti-rheumatic drug, and phenethyl isothiocyanate (PEITC), a bioactive phytochemical, using a sodium alginate (SA)-pluronic F127 (PF-127) in situ hydrogel formulation. Therefore, in the current study, the co-delivery of MTX and PEITC in the nanoparticulate form could help enhance stability and solubility and facilitate greater penetration in the target arthritic tissues. The fabricated MTX NP and PEITC NE were found to have a minimum particle size, PDI, and good zeta potential. Results from in vitro release studies showed that MTX and PEITC were simultaneously released from the DD NP HG matrix over 6-7 days through diffusion and erosion mechanisms. An intra-articular (IA) injection of DD NP HG dramatically reduced chronic inflammation in adjuvant-induced arthritis (AIA) rats, delayed the onset of bone erosion, significantly reduced synovitis, and down-regulated the inflammatory cytokine expression. Most notably, the co-delivery strategy almost entirely restored the morphological features of the ankle joints of RA rats. The hepatic and renal function tests indicated good biological safety for DD NP HG in RA conditions. Taken together, these findings indicated that DD NP HG could achieve good anti-inflammatory activity and reverse cartilage disruption through a synergistic effect between two nanoparticulate forms of MTX and PEITC, which can effectively improve the drawbacks of their free forms.

Delivery of biologics: Topical administration

Biologics are unaffordable to a large majority of the global population because of prohibitively expensive fermentation systems, purification and the requirement for cold chain for storage and transportation. Limitations of current production and delivery systems of biologics were evident during the recent pandemic when <2.5% of vaccines produced were available to low-income countries and ∼19 million doses were discarded in Africa due to lack of cold-chain infrastructure. Among FDA-approved biologics since 2015, >90% are delivered using invasive methods. While oral or topical drugs are highly preferred by patients because of their affordability and convenience, only two oral drugs have been approved by FDA since 2015. A newly launched oral biologic costs only ∼3% of the average cost of injectable biologics because of the simplified regulatory approval process by elimination of prohibitively expensive fermentation, purification, cold storage/transportation. In addition, the cost of developing a new biologic injectable product (∼$2.5 billion) has been dramatically reduced through oral or topical delivery. Topical delivery has the unique advantage of targeted delivery of high concentration protein drugs, without getting diluted in circulating blood. However, only very few topical drugs have been approved by the FDA. Therefore, this review highlights recent advances in oral or topical delivery of proteins at early or advanced stages of human clinical trials using chewing gums, patches or sprays, or nucleic acid drugs directly, or in combination with, nanoparticles and offers future directions.

Multifunctional nanoparticles encapsulating methotrexate and curcumin for holistic management of rheumatoid arthritis: in-vitro and pre-clinical assessment

PURPOSE

Bovine serum albumin (BSA) nanoparticles (BSA-MTX-CUR-NPs) encapsulating methotrexate (MTX) and curcumin (CUR) was developed with an aim to co-deliver the drugs at the inflamed joint so as to maximize the therapeutic efficacy and alleviate toxic side effects associated with MTX.

METHODS

Nanoparticle albumin-bound technology was used to formulate nanoparticles, followed by characterization for its particle size, polydispersity index, encapsulation efficiency, zeta potential, surface morphology, in-vitro drug release and drug release kinetics. Further, we investigated the pharmacokinetics and pharmacodynamics of the developed nanoparticles in the adjuvant-induced arthritis model.

RESULTS

BSA-MTX-CUR-NPs exhibited particle size of 163.05 ± 1.708 nm, polydispersity index of 0.195 ± 0.0024 and % encapsulation efficiency of 68.23 ± 0.640% for MTX and 75.71 ± 0.216% for CUR with controlled release pattern for both the drugs. The scanning electron microscopy revealed nanoparticles exhibited a spherical shape. DSC study confirmed the absence of incompatibility between the drugs and the excipients. Half-life and area under the curve were significantly higher for MTX in the nanoparticulate form in comparison to free MTX. Pharmacodynamic studies revealed that BSA-MTX-CUR-NPs possessed better disease-modifying effects in comparison to free MTX.

CONCLUSION

Hence, it can be concluded that albumin nanoparticles constitute a viable method for delivering MTX and CUR to inflamed joints simultaneously, because of the strong affinity of albumin and enhanced permeability and retention effect at the inflamed joint. This combinational therapy of MTX & CUR in nanoparticulate form has the potential for the holistic management of rheumatoid arthritis.

In vitro hepatotoxicity evaluation of methotrexate-loaded niosome formulation: fabrication, characterization and cell culture studies

BACKGROUND

Methotrexate (MTX) is a folic acid antagonist that is widely used to treat osteosarcoma, leukemia, breast cancer, and autoimmune and inflammatory diseases. The most important concerns with MTX are its poor solubility and high toxicity, particularly in liver cells. To enhance its solubility and to minimize its toxicity, we encapsulated MTX in niosomes and investigated its hepatotoxicity mechanisms using genetic biomarkers.

METHODS

Niosomes were successfully prepared using a modified thin film method, and the prepared monodisperse smallsized formulation was subsequently characterized. In vitro cytotoxicity studies were performed both in hepatocarcinoma (HEP3G) and healthy liver (AML12) cell lines. Specifically, immunofluorescence assay and evaluation of the expression levels of apoptotic, antioxidant, heat shock protein, and oxidative stress genes were performed.

RESULTS

The formulation had a particle size of 117.1 ± 33 nm, a surface charge of -38.41 ± 0.7 mV, and an encapsulation efficiency of 59.7% ± 2.3%. The results showed that the niosomal formulation exhibited significantly higher cytotoxic effects in HEP3G than in AML12. The immunofluorescence and genetic analyses showed that the increased cytotoxicity of niosomes resulted mainly from oxidative stress and slight apoptosis.

DISCUSSION

These results demonstrated that niosomal drug delivery systems could be a new potential formulation for minimizing MTX-related hepatotoxicity.

Impact of nanocarrier aggregation on EPR-mediated tumor targeting

The aim of this study was to investigate the influence of excipients on retaining the particle size of methotrexate (MTX) loaded chitosan nanocarriers (CsNP) during lyophilization, which relates to the ability to enlarge the particle size and target specific areas. The nanocarriers were prepared using the ionic gelation technique with tripolyphosphate as a crosslinker. Three lyophilized formulations were used: nanosuspension without Lyoprotectant (NF), with mannitol (NFM), and with sucrose (NFS). The lyophilized powder intended for injection (PI) was examined to assess changes in particle size, product integrity, and comparative biodistribution studies to evaluate targeting ability. After lyophilization, NFS was excluded from in-vivo studies due to the product melt-back phenomenon. The particle size of the NF lyophile significantly increased from 176 nm to 261 nm. In contrast, NFM restricted the nanocarrier size to 194 nm and exhibited excellent cake properties. FTIR, XRD, and SEM analysis revealed the transformation of mannitol into a stable β, δ polymorphic form. Biodistribution studies showed that the nanocarriers significantly increased MTX accumulation in tumor tissue (NF = 2.04 ± 0.27; NFM = 2.73 ± 0.19) compared to the marketed PI (1.45 ± 0.25 μg), but this effect was highly dependent on the particle size. Incorporating mannitol yielded positive results in restricting particle size and favoring successful tumor targeting. This study demonstrates the potential of chitosan nanocarriers as promising candidates for targeted tumor drug delivery and cancer treatment.

Statistical Analysis of Methotrexate Degradation by UV-C Photolysis and UV-C/TiO2 Photocatalysis

Methotrexate (MTX) is a folic acid analog and has been used to treat a wide variety of malignant and non-malignant diseases. The wide use of these substances has led to the continuous discharge of the parent compound and its metabolites in wastewater. In conventional wastewater treatment plants, the removal or degradation of drugs is not complete. In order to study the MTX degradation by photolysis and photocatalysis processes, two reactors were used with TiO₂ as a catalyst and UV-C lamps as a radiation source. H₂O₂ addition was also studied (absence and 3 mM/L), and different initial pHs (3.5, 7, and 9.5) were tested to define the best degradation parameters. Results were analyzed by means of ANOVA and the Tukey test. Results show that photolysis in acidic conditions with 3 mM of H₂O₂ added is the best condition for MTX degradation in these reactors, with a kinetic constant of 0.028 min^-1. According to the ANOVA test, all considered factors (process, pH, H₂O₂ addition, and experimentation time) caused statistically significant differences in the MTX degradation results.

In-vivo anticancer efficacy of self-targeted methotrexate-loaded polymeric nanoparticles in solid tumor-bearing rat

Here, cytotoxicity and antitumor efficacy against a chemically (N-methyl-N-nitrosourea) generated mammary tumor in rats were assessed using methotrexate-loaded chitosan nanoparticles (Meth-Cs-NPs). Meth-Cs-NPs intravenous administrated resulted in noticeably decreased tumor incidence, multiplicity, and weight. Further, kidney function tests for the treated groups resulted in noticeably decreased ALP (Meth-Cs-NPs; 244 ± 15, diseases control; 403 ± 14 U/L), Creatinine (Meth-Cs-NPs; 0.81 ± 0.05, diseases control; 2 ± 0.05 mg/dl), and Urea (Meth-Cs-NPs; 56.62 ± 5, diseases control; 113 ± 6 mg/dl) levels, close to a normal control group. Similarly, liver function tests showed significantly decreased serum biomarkers, SGPT (Meth-Cs-NPs; 40 ± 1.8, diseases control; 84 ± 1.9 U/L) and SGOT (Meth-Cs-NPs; 15 ± 2, diseases control; 55 ± 4 U/L) levels in treated groups as compared to the untreated group (diseases control). From the results, pro-inflammatory cytokines were also markedly reduced in the treated group such as, TNF-α (Meth-Cs-NPs; 17.31 ± 1.15, diseases control; 36.9 ± 5 pg/mL), IL-1β (Meth-Cs-NPs; 433.3 ± 66.5, diseases control; 1540 ± 131.1 pg/mL), and IL-6 (Meth-Cs-NPs; 1515 ± 53, diseases control; 2200.6 ± 69 pg/mL) levels. Whereas Meth-Cs-NPs not only helped in lowering tumor multiplicity rates but also decrease inflammation. The studies could be successfully performed in chemically induced mammary tumors due to their easy, quick tumor growth and low mortality rates in rat models. According to the current study, Meth-Cs-NPs have high treatment potency and represent a possible therapeutic alternative for breast cancer treatment.

Colon-specific delivery of methotrexate using hyaluronic acid modified pH-responsive nanocarrier for the therapy of colitis in mice

Oral immunosuppressant methotrexate (MTX) is an effective method for the treatment of inflammatory bowel disease (IBD). To overcome the defects of clinical application of MTX, poly (lactic-co-glycolic acid) (PLGA), Eudragits® S100 (ES100), chitosan (CS) and hyaluronic acid (HA) were used to structure the MTX-loaded HA-CS/ES100/PLGA nanoparticles (MTX@hCEP). MTX@hCEP had a hydrodynamic particle size of approximately 202.5 nm, narrow size distribution, negative zeta potential (-18.7 mV), and smooth surface morphology. In vitro drug release experiments under simulated gastrointestinal conditions indicated that MTX@hCEP exhibited colonic pH-sensitive drug release properties. The cellular uptake capacity of hCEP nanoparticles was significantly enhanced in RAW 264.7 macrophages. Moreover, we further found that the MTX@hCEP also inhibited the proliferation and the secretion of pro-inflammatory cytokines in the LPS-stimulated macrophages. In vivo imaging results not only demonstrated that the accumulated in the colon of colitis mice, but also indicated the extended retention time of MTX in the colon. Additionally, MTX@hCEP alleviated inflammatory symptoms via decreasing the activities of myeloperoxidase and pro-inflammatory factors, promoting mucosal repair in vivo. Collectively, these results clearly demonstrated that MTX@hCEP with properties of colon-specific and macrophages targeting can be exploited as an efficient nanotherapeutic for IBD therapy.

Drug delivery to the brain via the nasal route of administration: exploration of key targets and major consideration factors

Background

Cranial nerve-related diseases such as brain tumors, Alzheimer's disease, and epilepsy are serious diseases that continue to threaten human. Brain-related diseases are increasing worldwide, including in the United States and Korea, and these increases are closely related to the exposure to harmful substances and excessive stress caused by rapid industrialization and environmental pollution. Drug delivery to the brain is very important for the effective prevention and treatment of brain-related diseases. However, due to the presence of the blood-brain barrier and the extensive first-pass metabolism effect, the general routes of administration such as oral and intravenous routes have limitations in drug delivery to the brain. Therefore, as an alternative, the nasal-brain drug delivery route is attracting attention as a route for effective drug delivery to the brain.

Areas covered

This review includes physiological factors, advantages, limitations, current application status, especially in clinical applications, and the necessary factors for consideration in formulation development related to nasal-brain drug delivery.

Expert opinion

The nasal-brain drug delivery route has the advantage of enhancing drug delivery to the brain locally, mainly through the olfactory route rather than the systemic circulation. The nasal-brain lymphatic system has recently attracted attention, and it has been implied that the delivery of anticancer drugs to the brain nervous system is possible effectively. However, there are limitations such as low drug permeability, as well as nasal mucosa and the mucociliary system, as obstacles in nasal-brain drug delivery. Therefore, to overcome the limitations of nasal-brain drug delivery, the use of nanocarriers and mucoadhesive agents is being attempted. However, very few drugs have been officially approved for clinical application via the nasal-brain drug delivery route. This is probably because the understanding of and related studies on nasal-brain drug delivery are limited. In this review, we tried to explore the major considerations and target factors in drug delivery through the nasal-brain route based on physiological knowledge and formulation research information. This will help to provide a mechanistic understanding of drug delivery through the nasal-brain route and bring us one step closer to developing effective formulations and drugs in consideration of the key factors for nasal-brain drug delivery.

Efficacy analysis of targeted nanodrug for non-small cell lung cancer therapy

Biological macromolecules have been widely used as biomedical carriers in treating non-small cell lung cancer (NSCLC) due to their biocompatibility, targeting, biodegradability, and antitumor efficacy. Nanotechnology has been used in clinics to treat many diseases, including cancer. Nanoparticles (NPs) can accumulate drugs into tumors because of their enhanced permeability and retention (EPR) effects. However, the lack of active targeting ligands affects NPs drug delivery. Arginine-glycine-aspartic (RGD), as a targeting ligand, has distinct advantages in targeting and safety. In the present study, an RGD peptide-modified nanogel called RGD−polyethylene glycol−poly (L-phenylalanine-co-L-cystine) (RGD−PEG−P (LP-co-LC−P (LP-co-LC) was investigated to deliver vincristine (VCR) as NSCLC therapy. The VCR-loaded targeted nanoparticle (RGD-NP/VCR) demonstrated excellent antitumor efficacy compared to the free drug (VCR) and untargeted nanoparticle (NP/VCR) without any significant side effects. RGD-NP/VCR has better tumor inhibition and fewer side effects, indicating its potential benefit in NSCLC treatment.

Development and Evaluation of a Novel Methotrexate-Loaded Electrospun Patch to Alleviate Psoriasis Plaques

OBJECTIVE

To achieve an effective topical formulation of Methotrexate (MTX) as a first-line treatment of psoriasis, we formulated three MTX-loaded electrospun nanofibrous patches composed of polycaprolactone (PCL), Eudragit L100, and a mixture of them.

SIGNIFICANCE

Topical delivery of MTX provides an appropriate therapeutic performance while circumventing the life-threatening side effects of systemic administration.

METHODS

Three MTX-loaded electrospun nanofibrous patches were prepared and characterized in terms of size and morphology (using SEM), thermal behavior (by TGA and DSC), and crystalline structure (using XRD). Furthermore, the wettability and mechanical strength of samples were investigated through water contact angle and tensile strength tests. Also, the encapsulation efficiency of MTX was calculated. Subsequently, in vitro drug release profile of each formulation was obtained and different kinetic models were fitted to achieve the best-matched model. Accordingly, the ex vivo skin permeation of MTX was studied for the optimum formulation.

RESULTS

All samples showed appropriate morphology, thermal behavior, and encapsulation efficiency. Also, XRD results showed that MTX is dispersed within the polymeric matrices in the amorphous state (with no crystalline region). Release studies demonstrated that MTX-loaded Eudragit L100-PCL formulation outperformed in terms of mechanical behavior and in vitro drug release. This formulation also exhibited better skin permeation.

CONCLUSION

The obtained controlled-release MTX-loaded electrospun patches seem promising to provide a long-acting topical treatment of psoriatic plaques with minimized systemic side effects.

Core-shell Pluronic F127/chitosan based nanoparticles for effective delivery of methotrexate in the management of rheumatoid arthritis

This study was designed to improve oral bioavailability of the methotrexate (MTX) by sustaining its release profile and integration into core-shell polymeric nanoparticles. The self-micellization and ionotropic gelation technique was employed which resulted into spherical shaped nanoparticles (181-417 nm) with encapsulation efficiency of 80.14% to 85.54%. Furthermore, Fourier Transform Infrared Spectroscopy and Differential Scanning Calorimetry analyses were carried out to investigate physicochemical and thermal stability of the produced engineered core shell nanoparticles of the methotrexate. . Entrapment of drug in polymeric core was confirmed by X-ray diffraction analysis. In-vitro sustained release behavior of nanoparticles was observed at pH 6.8 for 48 h while low drug release was observed at pH 1.2 due to pH-responsive nature of Pluronic F127. Acute toxicity study confirmed safety and biocompatible profile of nanoparticles. MTX loaded polymeric nanoparticles ameliorated the pharmacokinetic profile (8 folds greater half-life, 6.26 folds higher AUC_0-t and 3.48 folds higher mean residence time). In vivo study conducted in rat model depicted the improved therapeutic efficacy and healing of arthritis through MTX loaded polymeric nanoparticles, preferentially attributable to high accretion of MTX in the inflamed site. In conclusion, MTX loaded polymeric nanoparticles is an attractive drug delivery strategy for an effective management and treatment of rheumatoid arthritis.

Formulation Development and Characterization of pH Responsive Polymeric Nano-Pharmaceuticals for Targeted Delivery of Anti-Cancer Drug (Methotrexate)

Oral administration of pH sensitive/stimuli responsive nanoparticles are gaining importance because of the limited side effects, minimum dose and controlled drug release. The objective of this study was to develop and evaluate pH sensitive polymeric nanoparticles for methotrexate with the aim to maximize the drug release at target site. In the presented study, pH sensitive polymeric nanoparticles of methotrexate were developed through modified solvent evaporation technique using polymer Eudragit S100. Different process parameters like drug to polymer ratio, speed of sonication, concentration of surfactant and time of sonication were optimized by evaluating their effects on particle size, PDI, zeta potential, entrapment/encapsulation efficiency. The developed formulations were evaluated for their size, polydispersity (PDI), zeta potential, encapsulation efficiency, XRD, scanning electron microscopy, in-vitro drug release and stability studies. Best results were obtained with poloxamer-407 and PVA and were selected as surfactants. Physicochemical characterization of the developed formulations showed that the particle size lies in the range 165.7 ± 1.85–330.4 ± 4.19, PDI 0.119 ± 0.02–0.235 ± 0.008, zeta potential −0.163 ± 0.11–−5.64 ± 0.36 mV, and encapsulation efficiency more than 61%. The results of scanning electron microscopy revealed that nanoparticles have regular geometry with spherical shape. Initially the drug release occur through diffusion followed by erosion. The present studies showed that MTX-ES100 nanoparticles prepared during this study have the desired physicochemical properties, surface morphology and release characteristics used to target the desired organs.

Antiproliferative and apoptotic potential of methotrexate lipid nanoparticle in murine breast cancer model

Aim: To evaluate the efficacy of novel methotrexate-loaded nanoparticles (MTX-NPs) in vitro and in vivo in the treatment of breast cancer. Materials & methods: MTX-NPs were tested for cellular uptake, cell viability, cell cycle, cellular wound migration and changes in tumor volume using characterized NPs. Results: The solid lipid NPs (SLNPs) showed strong cellular uptake, increased apoptosis, controlled cytotoxicity at lower IC50 of methotrexate and a sizable reduction in tumor burden. Conclusion: MTX-NP oral formulation can be a promising candidate in breast cancer treatment with improved cellular uptake and in vivo efficacy.

Preparation of colloidal nanoparticles PVA-PHEMA from hydrolysis of copolymers of PVAc-PHEMA as anticancer drug carriers

The novel pH-responsive polymer nanoparticles have been widely used for drug delivery and cancer therapy. The pH-sensitive nanoparticles include chemical structures that can accept or donate protons in response to an environmental pH change. Polybases which mostly contain alkaline groups such as amines and hydroxy, accept protons at low pH and are neutral at higher pH values. This study aimed to prepare pH-sensitive colloidal amphiphilic poly(vinyl alcohol-2-hydroxyethyl methacrylate) (PVA-PHEMA) copolymers in cancer therapy applications. For this purpose, poly(vinyl acetate-2-hydroxyethyl methacrylate) (PVAc-PHEMA) copolymer nanoparticles were synthesized in different polymerization medium fractions from water and methanol and different monomer feed concentration. Then acetate groups were hydrolyzed, and the PHEMA-PVA nanoparticles were synthesized. The nanoparticles were further characterized using dynamic light scattering, Fourier transform infrared spectroscopy, scanning electron microscopy, and thermogravimetric analysis to identify the structural and morphological changes. The Methotrexate (MTX) was loaded into the nanoparticles, and drug release kinetics were evaluated. The results confirmed that PHEMA-PVA copolymeric nanoparticles could be favorably used in cancer therapy.

pH-Sensitive nanoparticles containing 5-fluorouracil and leucovorin as an improved anti-cancer option for colon cancer

Background: Parenteral administration of chemotherapeutic drugs, 5-fluorouracil (5-FU) and leucovorin (LV), is commonly used to treat large bowel carcinomas such as colon cancer (CC) and colorectal carcinoma (CRC). Aim: Our study aims to design a novel nanoparticulate drug-delivery vehicle for oral use capable of colon-specific release. Methods: A modified double-emulsion solvent evaporation method was used in the preparation of pH-responsive Eudargit^® S100 polymeric nanoparticles, loaded with 5-FU/LV combination (5-FU/LV-loaded Eudargit S100 NPs). Results: Our optimized drug-loaded NP showed a pH-responsive drug release and exhibited significantly more cytotoxic actions in cancer-cell lines than free drugs. Conclusion: These findings open the way for conducting clinical trials for colon malignancies treated with nanoparticles.

Methotrexate-loaded folic acid of solid-phase synthesis conjugated gold nanoparticles targeted treatment for rheumatoid arthritis

PURPOSE

Methotrexate (MTX) is a first-line drug for rheumatoid arthritis (RA). Targeting of MTX to inflamed joints is essential to the prevention of potential toxicity and improving therapeutic effects. Gold nanoparticles (GNPs) are characterized by controllable particle sizes and good biocompatibilities, therefore, they are promising drug delivery systems. We aimed at developing a GNPs drug delivery system incorporating MTX and folic acid (FA) with strong efficacies against RA.

METHODS

MTX-Cys-FA was synthesized through solid-phase organic synthesis. Then, it was coupled with sulfhydryl groups in GNPs, thereby successfully preparing a GNPs/MTX-Cys-FA nanoconjugate with targeting properties. Physical and chemical techniques were used to characterize it. Moreover, we conducted its stability, release, pharmacokinetics, biodistribution and cell cytotoxicity, cell uptake, cell migration, as well as its therapeutic effect on CIA rats. The histopathology was conducted to investigate anti-RA effects of GNPs/MTX-Cys-FA nanoconjugates.

RESULTS

The GNPs/MTX-Cys-FA nanoconjugate exhibited a spherical appearance, had a particle size of 103.06 nm, a zeta potential of -33.68 mV, drug loading capacity of 11.04 %, and an encapsulation efficiency of 73.61%. Cytotoxicity experiments revealed that GNPs had good biocompatibilities while GNPs/MTX-Cys-FA exhibited excellent drug-delivery abilities. Cell uptake and migration experiment showed that nanoconjugates containing FA by LPS activated mouse mononuclear macrophages (RAW264.7) was significantly increased, and they exerted significant inhibitory effects on human fibroblast-like synoviocytes (HFLS) of RA (p<0.01). In addition, the nanoconjugate prolonged blood circulation time of MTX in collagen-induced arthritis (CIA) rats (p<0.01), enhanced MTX accumulation in inflamed joints (p<0.01), enhanced their therapeutic effects (p<0.01), and reduced toxicity to major organs (p<0.01).

CONCLUSION

GNPs/MTX-Cys-FA nanoconjugates provide effective approaches for RA targeted therapeutic strategies.

Development and In Vitro/In Vivo Evaluation of pH-Sensitive Polymeric Nanoparticles Loaded Hydrogel for the Management of Psoriasis

Methotrexate (MTX), the gold standard against psoriasis, poses severe problems when administered systemically viz increased toxicity, poor solubility and adverse reactions. Hence, a topical formulation of MTX for the management of psoriasis can be an effective approach. The present study aimed to develop an MTX based nanoparticle-loaded chitosan hydrogel for evaluating its potential efficacy in an imiquimod-induced psoriatic mice model. MTX-NPs loaded hydrogel was prepared and optimized using the o/w emulsion solvent evaporation method. Particle size, zeta potential, entrapment efficiency, in vitro drug release, ex vivo permeation, skin irritation and deposition studies were performed. Psoriatic Area and Severity Index (PASI) score/histopathological examinations were conducted to check the antipsoriatic potential of MTX-NPs loaded hydrogel using an imiquimod (IMQ)-induced psoriatic model. Optimized MTX-NPs showed a particle size of 256.4 ± 2.17 nm and encapsulation efficiency of 86 ± 0.03%. MTX-NPs loaded hydrogel displayed a 73 ± 1.21% sustained drug release in 48 h. Ex vivo permeation study showed only 19.95 ± 1.04 µg/cm2 of drug permeated though skin in 24 h, while epidermis retained 81.33% of the drug. A significant decrease in PASI score with improvement to normalcy of mice skin was observed. The developed MTX-NPs hydrogel displayed negligible signs of mild hyperkeratosis and parakeratosis, while histopathological studies showed healing signs of mice skin. So, the MTX-NPs loaded hydrogel can be a promising delivery system against psoriasis.

Naringin as Sustained Delivery Nanoparticles Ameliorates the Anti-inflammatory Activity in a Freund's Complete Adjuvant-Induced Arthritis Model

Naringin (NAR), a naturally occurring essential flavonoid, present in grapefruit and Chinese herbal medicines, creates great interest in researchers due to its diverse biological and pharmacological activities. However, further development of NAR is hindered due to its poor water solubility and dissolution rates in GIT. To address these limitations, in this study, we report polymeric nanoparticles (NPs) of NAR (NAR-PLGA-NPs) for enhancing the oral NAR efficiency, with a biodegradable polymer (PLGA) to improve its absorption and bioavailability. NAR-PLGA-NPs were fabricated by a modified solvent emulsification-evaporation technique. Physicochemical properties were evaluated by SEM, particle size distribution, entrapment efficiency, Fourier transform infrared spectroscopy (FTIR), X-ray diffraction (XRD), and differential scanning calorimetry (DSC). In vitro drug release and ex vivo permeation studies were carried out in phosphate buffer (pH 6.8) for 24 h. Furthermore, in vivo anti-arthritic studies were performed on a mouse model, and the results were compared with free NAR. The modulation of inflammatory mediators was also evidently supported by docking studies. Optimized nanoformulation FN4 (NAR-PLGA-NPs) prepared with acetone-ethanol (2:1) as a solvent system in a combination of stabilizers, i.e., poloxamer-188 and sodium deoxylate (1:1), along with 2% PVA solution, was prepared. From size characterization studies, it was observed that nanoformulations possessed a low particle size (179.7 ± 2.05 nm), a low polydispersity index (0.206 ± 0.001), and a negative zeta potential (-9.18 ± 0.78 mV) with a maximum entrapment efficiency (74 ± 3.61%). The drug release followed a Korsmeyer-Peppas release kinetic model (anomalous non-Fickian diffusion), providing greater NAR release after lyophilization (82.11 ± 3.65%) drug release in pH 6.8 phosphate buffer for 24 h. Ex vivo permeation analysis through an isolated goat intestinal membrane revealed 80.02 ± 3.69% drug release in 24 h. Encapsulation of a drug into PLGA is well described by the results of FTIR, DSC, and XRD. Finally, the therapeutic efficacy of optimized FN4 (NAR-PLGA-NPs) and its possible application on RA were further confirmed in a Freund's complete adjuvant-induced rat arthritic model as against free NAR at a dose of 20 mg/kg body wt. Our findings demonstrate that sustained action of NAR from optimized FN4 NPs with a rate-controlling polymeric carrier system exhibited prolonged circulation time and reduced arthritic inflammation, hence indicating the possibility as a novel strategy to secure the unpropitious biological interactions of hydrophobic NAR in a gastric environment.

Brigatinib loaded poly(d,l-lactide-co-glycolide) nanoparticles for improved anti-tumoral activity against non-small cell lung cancer cell lines

OBJECTIVE

The aim of the current investigation was to develop poly(d,l-lactide-co-glycolide) (PLGA) nanoparticles (NPs) to sustain the brigatinib (BTB) release for prolong time period and to examine the antitumor effect of the optimized NPs.

SIGNIFICANCE

Optimized PLGA-based NPs of BTB could be potentially used as a promising nanocarrier for the treatment of non-small cell lung cancer.

METHODS

BTB-loaded NPs were fabricated with core-shell of PLGA by solvent evaporation technique using different proportions of PLGA polymer and poly-vinyl alcohol (PVA) stabilizer. The prepared NPs were evaluated for particle characterizations; size, polydispersity index (PDI), zeta-potential, entrapment efficiency (EE), and drug loading (DL), Fourier-transform infrared (FTIR) spectroscopy, differential scanning calorimetry (DSC), and X-ray diffraction studies. The optimized NPs (BN5) were further evaluated for morphology, stability, and cytotoxicity studies against A549 cell-lines.

RESULTS

Among the nine different NPs formulae (BN1-BN9), BN5 was optimized with composition of BTB (30 mg), PLGA (75 mg), PVA (0.55% w/v), represents an average particle size of (267.1 ± 1.01 nm), PDI (0.101 ± 0.007), and zeta potential (-42.1 ± 0.75 mV), high EE (66.83 ± 0.06%), and DL (6.17 ± 0.69%). SEM image of selected NPs was spherical with smooth surface. In vitro drug release profile in phosphate buffers (pH 5 and pH 7.4) showed a biphasic release with initial burst phase followed by sustained release for prolong time. Furthermore, optimized NPs (BN5) exhibited excellent cytotoxic activity against A549 cell-lines with IC₅₀ value of 5.25 ± 0.23 µg/mL.

CONCLUSION

The overall results suggest that BTB-loaded PLGA NPs could be a potential nanocarrier for lung cancer treatment.

Effect of Micro-/Nanoparticle Hybrid Hydrogel Platform on the Treatment of Articular Cartilage-Related Diseases

Joint diseases that mainly lead to articular cartilage injury with prolonged severe pain as well as dysfunction have remained unexplained for many years. One of the main reasons is that damaged articular cartilage is unable to repair and regenerate by itself. Furthermore, current therapy, including drug therapy and operative treatment, cannot solve the problem. Fortunately, the micro-/nanoparticle hybrid hydrogel platform provides a new strategy for the treatment of articular cartilage-related diseases, owing to its outstanding biocompatibility, high loading capability, and controlled release effect. The hybrid platform is effective for controlling symptoms of pain, inflammation and dysfunction, and cartilage repair and regeneration. In this review, we attempt to summarize recent studies on the latest development of micro-/nanoparticle hybrid hydrogel for the treatment of articular cartilage-related diseases. Furthermore, some prospects are proposed, aiming to improve the properties of the micro-/nanoparticle hybrid hydrogel platform so as to offer useful new ideas for the effective and accurate treatment of articular cartilage-related diseases.

Folate-methotrexate loaded bovine serum albumin nanoparticles preparation: an in vitro drug targeting cytokines overwhelming expressed immune cells from rheumatoid arthritis patients

The study planned to estimate biological parameters linked to rheumatoid arthritis (RA) patients, detecting the influence of MTX and biotherapy treatments on these parameters and synthesizing methotrexate bovine serum albumin nanoparticles linked to folate (FA-MTX-BSA NPs) to reduce the overwhelming expression of inflammatory cytokines. Inflammatory parameters showed significant increases in newly diagnosed and MTX-receiving groups while no changes were observed in the biotherapy-maintained group. MTX-loaded BSA nanoparticles were fabricated by the desolvation method and further linked to activated folic acid to obtain FA-MTX-BSA NPs. FA-MTX-BSA NPs were successfully characterized within the nanoscale range using different screening techniques. FA-MTX-BSA NPs showed an in vitro release in a sustained manner. The potential of MTX, MTX-BSA NPs, and FA-MTX-BSA NPs in inducing cytokine level reduction was detected. Significant decreases in interleukin- 1 beta (IL-1β), interleukin-6 (IL-6), and tumor necrosis factor-alpha (TNF-α) levels were obtained in cultures treated with FA-MTX-BSA NPs compared to the untreated culture in a dose-dependent pattern. Furthermore, FA-MTX-BSA NPs comparing with MTX and MTX-BSA NPs exhibited a significant advanced effect in decreasing cytokines levels. Accordingly, the conjunction of BSA NPs and MTX linked to folate potentially reduced cytokines manifestation in RA.

Pharmacokinetic Comparison between Methotrexate-Loaded Nanoparticles and Nanoemulsions as Hard- and Soft-Type Nanoformulations: A Population Pharmacokinetic Modeling Approach

The purpose of this study was to identify and explore the differences in pharmacokinetics between different nanoformulations. This was done by comparing the pharmacokinetics of methotrexate-loaded nanoparticles [poly(lactic-co-glycolic acid); size of 163.70 ± 10.25 nm] and nanoemulsions (olive oil and Labrasol; size of 173.77 ± 5.76 nm), which represent hard- and soft-type nanoformulations, respectively. In addition, the population pharmacokinetic modeling approach as a useful tool for the comparison of pharmacokinetics between nanoformulations was newly proposed through this study. Significant pharmacokinetic differences were identified between nanoformulations through the new population pharmacokinetic modeling approach. As a result, the formulation type was explored as a significant covariate. The clearance and bioavailability of methotrexate-loaded nanoemulsions tended to decrease by 99% and increase by 19%, respectively, compared to those of the nanoparticles. The exploration of significant pharmacokinetic differences between drug formulations and their correlations presented in this study provide new perspectives on the development of nanoformulations.

Biodistribution and efficacy of the anticancer drug, oxaliplatin palmitate acetate, in mice

Oxaliplatin palmitate acetate (OPA), a platinum (IV) oxaliplatin derivative, was previously designed with the aim to improve the platinum-based anti-cancer therapy. In this work, we further explore the potential of OPA in extensive in vitro and in vivo studies. OPA in pancreatic (BxPC3-luc), lung (NCI-H1993) and liver (Hep3B) cancer cell lines showed a higher toxicity in comparison to oxaliplatin. The in vitro release kinetic experiments of OPA from the nanoparticles (NPs) under sink conditions exhibited a very rapid profile. Furthermore, OPA cannot be considered a prodrug of oxaliplatin, based on the OPA intact molecule pharmacokinetic profile study in rats. The formation of oxaliplatin from the biodegradation of OPA ranges only from 5% to 7% and both drugs were rapidly eliminated from the plasma. Pharmacokinetics of OPA PLGA nanoparticles in mice showed that nanoparticles failed to prolong the release of OPA in the plasma and did not add any therapeutic benefit over OPA solution, as suggested by the rapid in vitro release of OPA from nanoparticles. In pancreatic xenograft BxPC3-luc cancer model, both OPA in solution and OPA nanoparticles inhibited the tumor growth, equally and significantly, as compared to oxaliplatin. In liver xenograft Hep3B cancer model, OPA solution and cisplatin demonstrated good and similar antitumor efficacy. In lung xenograft NCI-H1993 cancer model, OPA solution, with a significant antitumor efficacy, was superior to cisplatin, which did not differ from the vehicle. In conclusion, OPA may offer a promising advance in platinum-based chemotherapy against various forms of cancers in an adequate dose and schedule.

Oral delivery of topotecan in polymeric nanoparticles: Lymphatic distribution and pharmacokinetics

There have been many attempts to formulate a variety of drugs in nano-size formulations. However, biodistribution characteristics of these formulated drugs remain unclear. Information about the pharmacokinetics and distributions of these formulations is essential for future practical use and advanced formulation development. Topotecan is a useful agent for treating a variety of cancers. It exhibits anti-cancer activity by inhibiting topoisomerase. However, oral bioavailability of topotecan was not satisfactory in previous studies. Reversible hydrolysis of its active site according to pH environment was a major limitation in terms of treatment. To improve the bioavailability and retention of topotecan in target organs (such as lung and brain) and increase its delivery to the lymphatic system as a major pathway for cancer metastasis, this study was conducted on topotecan-loaded nanoparticles using poly(lactic-co-glycolic acid) (PLGA). These nanoparticles were prepared by double emulsion solvent evaporation. Formulated topotecan-loaded PLGA nanoparticles were subjected to several in vitro tests to determine various physicochemical properties such as size, zeta potential, encapsulation efficiency, morphology, and release profile. These nanoparticles were also subjected to in vivo studies using rats. Based on in vivo results, pharmacokinetic properties, distribution in the body, and delivery efficiency of these formulated nanoparticles were confirmed. Topotecan-loaded PLGA nanoparticles showed a delayed release pattern in vitro. Their pharmacokinetic profiles and distributions in the body were clearly different from those of free topotecan hydrochloride. Results confirmed that topotecan encapsulated in the PLGA polymer was stable from hydrolysis and present in an active form for a longer time in the body. Biometric imaging revealed in vivo properties of topotecan-loaded PLGA nanoparticles for qualitative confirmation. And oral delivery of topotecan in polymeric nanoparticles to lymph and various body tissues has been identified. Findings of this study indicate that topotecan formulated into nanoparticles (using PLGA) has a better pharmacokinetic profile and a better delivery to lymphoid tissues, lung, and brain than free topotecan hydrochloride, suggesting that these topotecan-loaded PLGA nanoparticles might provide better therapeutic results.

Evaluation of nanoparticle drug-delivery systems used in preclinical studies

Multifunctional nanoparticles have been identified as a promising drug-delivery system for sustainable drug release. The structural and size tunability and disease-targeting ability of nanoparticles have made them more suitable for multiple drug loading and delivery, thereby enhancing therapeutic results through synergistic effects. Nanoparticulate carriers with specific features such as target specificity and stimuli-responsiveness enable selective drug delivery with lower potential side effects. In this review we have classified the recently published articles on polymeric and inorganic nanoparticle-mediated drug delivery into three different categories based on functionality and discussed their efficiency for drug delivery and their therapeutic outcomes in preclinical models. Most of the drug-loaded nanodelivery systems discussed have demonstrated negligible or very low systemic toxicity throughout the experimental period in animal models compared with free drug administration. In addition, some challenges associated with the translation of nanoparticle-based drug carrier responses to clinical application are highlighted.

Increased Encapsulation Efficiency of Methotrexate in Liposomes for Rheumatoid Arthritis Therapy

Methotrexate (MTX) is a common drug used to treat rheumatoid arthritis. Due to the excessive side effects, encapsulation of MTX in liposomes is considered an effective delivery system, reducing drug toxicity, while maintaining its efficacy. The ethanol injection method is an interesting technique for liposome production, due to its simplicity, fast implementation, and reproducibility. However, this method occasionally requires the extrusion process, to obtain suitable size distribution, and achieve a low level of MTX encapsulation. Here, we develop a novel pre-concentration method, based on the principles of the ethanol injection, using an initial aqueous volume of 20% and 1:1 ratio of organic:aqueous phase (v/v). The liposomes obtained present small values of size and polydispersity index, without the extrusion process, and a higher MTX encapsulation (efficiency higher than 30%), suitable characteristics for in vivo application. The great potential of MTX to interact at the surface of the lipid bilayer was shown by nuclear magnetic resonance (NMR) studies, revealing mutual interactions between the drug and the main phospholipid via hydrogen bonding. In vivo experiments reveal that liposomes encapsulating MTX significantly increase the biological benefit in arthritic mice. This approach shows a significant advance in MTX therapeutic applications.

Enhanced Lymphatic Delivery of Methotrexate Using W/O/W Nanoemulsion: In Vitro Characterization and Pharmacokinetic Study

Methotrexate, which is widely used in the treatment of cancer and immune-related diseases, has limitations in use because of its low bioavailability, short half-life, and tissue toxicity. Thus, in this study, a nano-sized water-in-oil-in-water (W/O/W) double emulsion containing methotrexate was prepared to enhance its lymphatic delivery and bioavailability. Based on the results from solubility testing and a pseudo-ternary diagram study, olive oil as the oil, Labrasol as a surfactant, and ethanol as a co-surfactant, were selected as the optimal components for the nanoemulsion. The prepared nanoemulsion was evaluated for size, zeta potential, encapsulation efficiency, pH, morphology, and in vitro release profiles. Furthermore, pharmacokinetics and lymphatic targeting efficiency were assessed after oral and intravenous administration of methotrexate-loaded nanoemulsion to rats. Mean droplet size, zeta potential, encapsulation efficiency, and pH of formulated nanoemulsion were 173.77 ± 5.76 nm, -35.63 ± 0.78 mV, 90.37 ± 0.96%, and 4.07 ± 0.03, respectively. In vitro release profile of the formulation indicated a higher dissolution and faster rate of methotrexate than that of free drug. The prepared nanoemulsion showed significant increases in maximum plasma concentration, area under the plasma concentration-time curve, half-life, oral bioavailability, and lymphatic targeting efficiency in both oral and intravenous administration. Therefore, our research proposes a methotrexate-loaded nanoemulsion as a good candidate for enhancing targeted lymphatic delivery of methotrexate.

Cellular Analysis and Chemotherapeutic Potential of a Bi-Functionalized Halloysite Nanotube

The surface of halloysite nanotubes (HNTs) was bifunctionalized with two ligands—folic acid and a fluorochrome. In tandem, this combination should selectively target cancer cells and provide a means for imaging the nanoparticle. Modified bi-functionalized HNTs (bi-HNTs) were then doped with the anti-cancer drug methotrexate. bi-HNTs were characterized and subjected to in vitro tests to assess cellular growth and changes in cellular behavior in three cell lines—colon cancer, osteosarcoma, and a pre-osteoblast cell line (MC3T3-E1). Cell viability, proliferation, and cell uptake efficiency were assessed. The bi-HNTs showed cytocompatibility at a wide range of concentrations. Compared with regular-sized HNTs, reduced HNTs (~6 microns) were taken up by cells in more significant amounts, but increased cytotoxicity lead to apoptosis. Multi-photon images confirmed the intracellular location of bi-HNTs, and the method of cell entry was mainly through caveolae-mediated endocytosis. The bi-HNTs showed a high drug loading efficiency with methotrexate and a prolonged period of release. Most importantly, bi-HNTs were designed as a drug carrier to target cancer cells specifically, and imaging data shows that non-cancerous cells were unaffected after exposure to MTX-doped bi-HNTs. All data provide support for our nanoparticle design as a mechanism to selectively target cancer cells and significantly reduce the side-effects caused by off-targeting of anti-cancer drugs.

Overview of Dual-Acting Drug Methotrexate in Different Neurological Diseases, Autoimmune Pathologies and Cancers

Methotrexate, a structural analogue of folic acid, is one of the most effective and extensively used drugs for treating many kinds of cancer or severe and resistant forms of autoimmune diseases. In this paper, we take an overview of the present state of knowledge with regards to complex mechanisms of methotrexate action and its applications as immunosuppressive drug or chemotherapeutic agent in oncological combination therapy. In addition, the issue of the potential benefits of methotrexate in the development of neurological disorders in Alzheimer’s disease or myasthenia gravis will be discussed.

Surfactant-Free, Self-Assembled Nanomicelles-Based Transdermal Hydrogel for Safe and Targeted Delivery of Methotrexate against Rheumatoid Arthritis

Methotrexate (MTX) is the first line agent for therapy against rheumatoid arthritis (RA); however, orally its efficacy is hampered by poor solubility, less permeability, short plasma half-life, and reduced bioavailability. Meanwhile, parenteral formulations are associated with severe adverse effects. In an attempt to improve the efficacy of MTX, we synthesized polycaprolactone-polyethylene glycol-polycaprolactone (PCL-PEG-PCL) triblock copolymer by a ring-opening copolymerization reaction and used it as a carrier for the fabrication of MTX-loaded nanomicelles. Surfactant-free, self-assembled nanomicelles were prepared by nanoprecipitation technique and optimized through central composite design. The optimized nanomicelles exhibited a size distribution of 31 nm and an encapsulation efficiency of 91%. In vitro, the nanomicelles exhibited hemocompatibility, sustained release, and significantly high uptake in lipopolysaccharide activated macrophages. To facilitate application on the skin, optimized nanomicelles were loaded into a Carbopol 934-based hydrogel with eucalyptus oil as a penetration enhancer. Eucalyptus oil significantly improved the permeation of nanomicelles through the skin (p < 0.001). When the hydrogel was applied on the RA mice model, nanomicelles exhibited preferentially highest accumulation in the inflamed joints than other organs. As compared with the free MTX, MTX nanomicelles significantly improved the pharmacokinetic (4.34-fold greater half-life, 3.68-fold higher AUC_0-t, and 3.15-fold higher mean residence time) and pharmacodynamic profile ascertained through low inflammatory cytokines expression, improved oxidation protection, recovered behavioral responses, and radiological analysis. MTX nanomicelles-based hydrogel also significantly reduced the hepatotoxicity and did not activate the immune system. These results suggest that the MTX-loaded nanomicelles-based transdermal hydrogel can prove to be a promising agent against RA.

Insights on Ultrafiltration-Based Separation for the Purification and Quantification of Methotrexate in Nanocarriers

The evaluation of encapsulation efficiency is a regulatory requirement for the characterization of drug delivery systems. However, the difficulties in efficiently separating nanomedicines from the free drug may compromise the achievement of accurate determinations. Herein, ultrafiltration was exploited as a separative strategy towards the evaluation of methotrexate (MTX) encapsulation efficiency in nanostructured lipid carriers and polymeric nanoparticles. The effect of experimental conditions such as pH and the amount of surfactant present in the ultrafiltration media was addressed aiming at the selection of suitable conditions for the effective purification of nanocarriers. MTX-loaded nanoparticles were then submitted to ultrafiltration and the portions remaining in the upper compartment of the filtering device and in the ultrafiltrate were collected and analyzed by HPLC-UV using a reversed-phase (C18) monolithic column. A short centrifugation time (5 min) was suitable for establishing the amount of encapsulated MTX in nanostructured lipid carriers, based on the assumption that the free MTX concentration was the same in the upper compartment and in the ultrafiltrate. The defined conditions allowed the efficient separation of nanocarriers from the free drug, with recoveries of >85% even when nanoparticles were present in cell culture media and in pig skin surrogate from permeation assays.

New horizons of methotrexate application

Methotrexate is an anti-inflammatory and anticancer drug that has been used in the treatment of various oncological and inflammatory diseases (such as rheumatoid arthritis, inflammatory bowel disease, psoriasis, sarcoidosis, etc.). Scientists are working on finding optimal formulation that will maintain its efficacy and improve safety and nanoparticles have shown to be carriers with great potential as they protect the drug from degradation while at the same time they increase absorption. In vivo and in vitro studies of numerous nanoparticle preparations have showed that they generally have appropriate characteristics and can be carriers for targeted delivery of methotrexate to the tissues affected by disease. Topical preparations of methotrexate, mainly for the treatment of psoriasis, have also been assessed in various research and have showed promising results. Further research is warranted by the obtained results and will hopefully lead to new methotrexate formulations that will be approved by regulatory authorities and used instead of existing ones to improve efficacy of the drug and patients' safety.

Editorial of Special Issue "Surface-Functionalized Nanoparticles as Drug Carriers"

Safe and effective delivery of therapeutics at the target site is the key to successful therapy. Nanocarriers can offer significant advantages over conventional dosage forms. Over the decades, nanoparticles have been extensively used to increase bioavailability, improve solubility and stability, reduce toxicities, and facilitate the controlled release of therapeutics. Further, nanoparticles have often been surface-functionalized with a variety of ligands to enhance circulation half-life and increase target-specificity. Although nanotechnology has shown significant therapeutic benefits for multiple biomedical applications, limited nanoparticle-based formulations have progressed to clinical trials, and only a few have reached the pharmaceutical market. This editorial is an introduction to the special issue entitled Surface-Functionalized Nanoparticles as Drug Carriers. We outline the scope of the special issue, summarize the results and conclusions of the nine articles published in this issue, and provide perspective on the application of surface-functionalized nanoparticles in the drug delivery field.

Production and Characterization of Glutathione-Chitosan Conjugate Films as Systems for Localized Release of Methotrexate

Cancer is one of the most serious public health problems that affect humanity. Diverse delivery systems of anticancer drugs have been developed to enhance the treatment effectiveness and patient compliance. Thus, drug delivery systems from polymeric films could be an interesting and promising alternative, especially for skin chemotherapeutics. In this work, polymeric films based on glutathione-chitosan conjugates with degrees of thiolation of 4.4%, 5.1% and 7.0% were synthetized by casting-evaporation method and subsequent loading with methotrexate. The surface properties of these films were evaluated by contact angle and spreading rate measurements. The sessile drop methods along with the thermodynamic parameter of work of adhesion were determined using the Young-Dupré semi-empirical model. The in vitro methotrexate release was assessed at a pH of 4.5 and 7.4 simulating physiological conditions. Data from the resulting profiles were fitted to the order one, Higuchi, Peppas-Sahlin and Korsmeyer-Peppas kinetic models. The results suggest a strong relationship between the thiolation degree and hydrophilic surface properties such as contact angle and water spreading rate, whereas the work of adhesion was not significantly affected. Further, these polymer films could control the methotrexate release through diverse mechanisms such as diffusion and relaxation depending on the thiolation degree and the aqueous medium employed. In fact, as thiolation degree increased, the release mechanism shifted from a primary diffusional type towards a predominant relaxation-driven mechanism. These polymer films could be used as modified systems for anticancer local delivery.