Polyoxometalate-Polymer Hybrid Materials as Proton Exchange Membranes for Fuel Cell Applications

POM-Based Hydrogels for Efficient Synergistic Chemodynamic/Low-Temperature Photothermal Antibacterial Therapy

Bacterial infection of wound surfaces has posed a significant threat to human health and represents a formidable challenge in the clinical treatment. In this study, a novel antimicrobial hydrogel utilizing POM is synthesized as the primary component, with gelatin and sodium alginate as the structural framework. The resultant hydrogel demonstrates exceptional mechanical properties and viscoelasticity attributed to the hydrogen-bonded cross-linking between POM and gelatin, as well as the ionic cross-linking between sodium alginate and Ca2+. In addition, the integration of CuS nanoparticles conferred photothermal properties to the hydrogel system. To address the concerns regarding the potential thermal damage to the surrounding normal cells, this study employs a LT-PTT combined with CDT approach to achieve the enhanced antimicrobial efficacy while minimizing the inadvertent harm to the healthy cells. The findings suggested that POM-based hydrogels, serving as an inorganic-organic hybrid material, will represent a promising antimicrobial solution and offer valuable insights for the development of the non-antibiotic materials.

Application of matrix-assisted laser desorption/ionization in the studies of phosphotungstic acid

RATIONALE

Phosphorotungstic acid (PTA) has many applications, especially in the field of catalysis, due to its structural properties. However, the structure of PTA is studied mainly using theoretical methods. Matrix-assisted laser desorption/ionization (MALDI) has the potential to be an effective method for the experimental study of heteropolyacids. Limitations of MALDI are the high molecular weight of the particles and the complex distribution of isotopic peak intensities. Both problems can be solved by automatically identifying observed signals by generating hypothetical molecular formulas and estimating their isotopic distributions.

METHODS

Phosphotungstic acid was studied under conditions of laser desorption/ionization in the absence and in the presence of the matrix. Three types of matrices were used: 2,5-dihydroxybenzoic acid in water, α-cyano-4-hydroxycinnamic acid in acetonitrile, and sinapic acid (SA) in tetrahydrofuran. Part of the peaks in the resulting mass spectra was identified using in-house developed software that implements the automated isotopic distribution brute force.

RESULTS

The most informative mass spectra were obtained using SA as the matrix, which enabled the detection of particles containing PTA dimers for the first time. The compositions of particles incorporating PTA dimers were determined in an automated manner and can be written as [H3PW12O40]2·2H2O (m/z = 5791.2 Da) and [H3PW12O40]2·4H2O (m/z = 5836.5 Da). Other observed species included (WO3)n·PO3 -, HPO2·(WO3)n, and WO2·(WO3)n clusters, with the latter containing W in mixed oxidation states.

CONCLUSIONS

The combined use of MALDI and an automated identification procedure provided valuable experimental data on the structure and fragmentation of phosphotungstic acid. To the best of our knowledge, this study was the first to report on particles containing phosphotungstic acid dimers.

Effects of heated-treating temperature on the stability and electrochemical performance of alginate-based multi-crosslinked biomembranes

In this study, the organosilane nanoparticles as additive and crosslinker were prepared and incorporated into sodium alginate to fabricate a series of alginate-based multi-crosslinked biomembranes at different thermal treatment temperature without the usage of another crosslinking agent. The effects of treatment temperature on the stability of biomembranes including dimensional, oxidative, hydrolytic and mechanical stability were investigated in detail. As a whole, the stability of biomembranes exhibited increasing tendency with the increment of treatment temperature due to the formation of more compact internal network structure. The electrochemical performance of biomembranes in respect to their potential as proton exchange membranes for direct methanol fuel cell application were also investigated based on the treatment temperature. The results revealed that the biomembranes possessed excellent methanol resistance and the methanol diffusion coefficient decreased with the increment of treatment temperature. The biomembrane with 120 °C heat-treatment showed the optimal selectivity (14.30 × 105 Ss cm-3), which was about 1.77 and 68.10 times of that and of M-80 (8.09 × 105 Ss cm-3) and Nafion@117 (0.21 × 105 Ss cm-3), respectively. Fuel cell performance measurements showed that M-120 possessed higher maximum power density and cell stability compared with M-80 and Nafion@117, indicating its best adaptability for use in direct methanol fuel cell.

Hierarchically Structured Nanocomposites via Mixed-Graft Block Copolymer Templating: Achieving Controlled Nanostructure and Functionality

Integrating inorganic and polymerized organic functionalities to create composite materials presents an efficient strategy for the discovery and fabrication of multifunctional materials. The characteristics of these composites go beyond a simple sum of individual component properties; they are profoundly influenced by the spatial arrangement of these components and the resulting homo-/hetero-interactions. In this work, we develop a facile and highly adaptable approach for crafting nanostructured polymer-inorganic composites, leveraging hierarchically assembling mixed-graft block copolymers (mGBCPs) as templates. These mGBCPs, composed of diverse polymeric side chains that are covalently tethered with a defined sequence to a linear backbone polymer, self-assemble into ordered hierarchical structures with independently tuned nano- and mesoscale lattice features. Through the coassembly of mGBCPs with diversely sized inorganic fillers such as metal ions (ca. 0.1 nm), metal oxide clusters (0.5-2 nm), and metallic nanoparticles (>2 nm), we create three-dimensional filler arrays with controlled interfiller separation and arrangement. Multiple types of inorganic fillers are simultaneously integrated into the mGBCP matrix by introducing orthogonal interactions between distinct fillers and mGBCP side chains. This results in nanocomposites where each type of filler is selectively segregated into specific nanodomains with matrix-defined orientations. The developed coassembly strategy offers a versatile and scalable pathway for hierarchically structured nanocomposites, unlocking new possibilities for advanced materials in the fields of optoelectronics, sensing, and catalysis.

Semi-Solid Supramolecular Ionic Network Electrolytes Formed by Zwitterionic Liquids and Polyoxometalate Nanoclusters for High Proton Conduction

Flexible electrolytes with solid self-supporting properties are highly desired in the fields of energy and electronics. However, traditional flexible electrolytes prepared by doping ionic liquids or salt solutions into a polymer matrix pose a risk of liquid component leakage during device operation. In this work, the development of supramolecular ionic network electrolytes using polyoxometalate nanoclusters as supramolecular crosslinkers to solidify bola-type zwitterionic liquids is reported. The resulting self-supporting electrolytes possess semi-solid features and show a high proton conductivity of 8.2 × 10-4 S cm-1 at low humidity (RH = 30%). Additionally, the electrolytes exhibit a typical plateau region in rheological tests, indicating that their dynamic network structures can contribute mechanical behavior similar to the entangled networks in covalent polymer materials. This work introduces a new paradigm for designing flexible solid electrolytes and expands the concept of reticular chemistry to noncrystalline systems.

Synthesis and comparison of three photocatalysts for degrading tramadol as an analgesic and widely used drug in water samples

Tramadol is an analgesic drug that is mainly excreted in the urine. The entry of Tramadol into water samples causes their biological contamination. Therefore, three catalysts such as bismuth ferrite, cobalt-doped bismuth ferrite, and a magnetized Keggin type of polyoxometalate (α-Fe₂O₃@phosphotungstic acid), were synthesized as photocatalysts to degrade Tramadol in water samples. The morphology and properties of the prepared photocatalysts were evaluated using several techniques. Effects of several factors, including tramadol concentration, pH, hydrogen peroxide concentration, and photocatalyst amount, were studied and optimized by a design experiment procedure based on Box-Behnken design for reducing the number of experiments and cost and investigating the interactions between factors in the photocatalytic degradation process of Tramadol. These factors were optimized for each prepared photocatalyst individually. Under the optimum conditions, the percentages of tramadol degradation and kinetics of the degradation process were evaluated in the presence of each photocatalyst. The tramadol degradation percentages using bismuth ferrite, cobalt-doped bismuth ferrite, and α-Fe₂O₃ @phosphotungstic acid were 81.10% for 120 min, 90.63% for 80 min, and 91.32% for 80 min, respectively. The rate constants of tramadol degradation were 0.0145, 0.0329, and 0.0312 min^-1 for bismuth ferrite, cobalt-doped bismuth ferrite, and α-Fe₂O₃ @phosphotungstic acid, respectively. The results indicated the highest percentage of tramadol degradation and rate of the degradation process were obtained using α-Fe₂O₃ @phosphotungstic acid and cobalt-doped bismuth ferrite, respectively.

Ionic-Nanophase Hybridization of Nafion by Supramolecular Patching for Enhanced Proton Selectivity in Redox Flow Batteries

Nafion, as the mostly used proton exchange membrane material in vanadium redox flow batteries (VRFBs), encounters serious vanadium permeation problems due to the large size difference between its anionic nanophase (3-5 nm) and cationic vanadium ions (∼0.6 nm). Bulk hybridization usually suppresses the vanadium permeation at the expense of proton conductivity since conventional additives tend to randomly agglomerate and damage the nanophase continuity from unsuitable sizes and intrinsic incompatibility. Here, we report the ionic-nanophase hybridization strategy of Nafion membranes by using fluorinated block copolymers (FBCs) and polyoxometalates (POMs) as supramolecular patching additives. The cooperative noncovalent interactions among Nafion, interfacial-active FBCs, and POMs can construct a 1 nm-shrunk ionic nanophase with abundant proton transport sites, preserved continuity, and efficient vanadium screeners, which leads to a comprehensive enhancement in proton conductivity, selectivity, and VRFB performance. These results demonstrate the intriguing potential of the supramolecular patching strategy in precisely tuning nanostructured electrolyte membranes for improved performance.

A Maximization of the Proton Conductivity of Sulfonated Poly(Ether Ether Ketone) with Grafted Segments Containing Multiple, Flexible Propanesulfonic Acid Groups

To enhance the proton conductivity of sulfonated poly(ether ether ketone) (SPEEK), proton-conducting groups are required to be covalently connected to SPEEK and form proton-conducting channels. Herein, SPEEK fully grafted with segments containing multiple, flexible propanesulfonic acid groups (MS-SPEEK-102) is successfully prepared. Compared with SPEEK, MS-SPEEK-102 exhibits a higher proton conductivity of 8.3 × 10^-2  S cm^-1 at 80 °C with 98% relative humidity, and consequently a greater power density of 0.530 W cm^-2 at 60 °C. These can be ascribed to the increased number of sulfonic acid groups, and ample, uninterrupted proton-conducting channels constructed by the movement of the maximum content, flexible side-chain segments. This approach offers an idea for obtaining a proton exchange membrane with good proton conductivity based on SPEEK.

Photocatalytic degradation of industrial dye using hybrid filler impregnated poly-sulfone membrane and optimizing the catalytic performance using Box-Behnken design

Mixed Matrix Membranes have gained significant attention over the past few years due to their diverse applications, unique hybrid inorganic filler and polymeric properties. In this article, the impregnation of nano-hybrid filler (polyoxometalates (∼POMs) encapsulated into the metal-organic framework (MOF) ∼ PMOF) on the polysulfone membrane (∼PSF) was done, resulting in a mix matrix membrane (∼PMOF@PSF). The developed structure was characterized by Fourier transform infrared (FT-IR), powder X-ray diffraction (PXRD), thermogravimetric analysis (TGA), scanning electron microscopy (SEM), and transmission electron microscopes (TEM). The results confirmed that the nano-hybrid filler was successfully fabricated on the surface of PSF. Different loading ratios of nano-hybrid filler (5%, 10%, 20%, 30%, and 40%) were used for impregnation. The study's objective was to enhance catalytic performance using optimization curves designed using a three-level Box-Behnken Design (BBD) simulation. The photodegradation of Methylene Blue (∼MB) was studied against PMOF@PSF_30% and was found to perform optimally when the concentration of catalyst, time of degradation, and temperature were 0.05-0.15 gm, 40-120 min, and 30-70 °C respectively. These experiments were replicated 15 times, and obtained results were further processed using a two-quadratic polynomial model to develop response surface methodology (RSM), which allowed for a functional relationship between the decolorization and experimental parameters. The optimal performance of the reaction mixture was calculated to be 0.15 gm for concentration, 70 °C for temperature, with an 80 min reaction time. Under these optimal conditions, the predicted decolorization of MB was 98.09%. Regression analysis with R² > 0.99 verified the fit of experimental results with predicted values. The PMOF@PSF PSF_30% demonstrated excellent reusability as its dye degradation properties were significantly unaffected after ten cycles.

Supramolecular Anchoring of Polyoxometalate Amphiphiles into Nafion Nanophases for Enhanced Proton Conduction

Advanced proton exchange membranes (PEMs) are highly desirable in emerging sustainable energy technology. However, the further improvement of commercial perfluorosulfonic acid PEMs represented by Nafion is hindered by the lack of precise modification strategy due to their chemical inertness and low compatibility. Here, we report the robust assembly of polyethylene glycol grafted polyoxometalate amphiphile (GSiW₁₁) into the ionic nanophases of Nafion, which largely enhances the comprehensive performance of Nafion. GSiW₁₁ can coassemble with Nafion through multiple supramolecular interactions and realize a stable immobilization. The incorporation of GSiW₁₁ can increase the whole proton content in the system and induce the hydrated ionic nanophase to form a wide channel for proton transport; meanwhile, GSiW₁₁ can reinforce the Nafion ionic nanophase by noncovalent cross-linking. Based on these synergistic effects, the hybrid PEMs show multiple enhancements in proton conductivity, tensile strength, and fuel cell power density, which are all superior to the pristine Nafion. This work demonstrates the intriguing advantage of molecular nanoclusters as supramolecular enhancers to develop high-performance electrolyte materials.

Fluoropolymers and Their Nanohybrids As Energy Materials: Application to Fuel Cells and Energy Harvesting

The current review article provides deep insight into the fluoropolymers and their applications in energy technology, especially in the field of energy harvesting and the development of fuel cell electrolyte polymeric membranes. Fluoropolymers have gained wide attention in the field of energy applications due to their versatile properties. The incorporation of nanofillers within the fluoropolymer to develop the nanohybrid results in an enhancement in the properties, like thermal, mechanical, gas permeation, different fuel cross-over phenomena through the membrane, hydrophilic/hydrophobic nature, ion transport, and piezo-electric properties for fabricating energy devices. The properties of nanohybrid materials/membranes are influenced by several factors, such as type of filler, their size, amount of filler, level of dispersion, surface acidity, shape, and formation of networking within the polymer matrix. Fluoropolymer-based nanohybrids have replaced several commercial materials due to their chemical inertness, better efficacy, and durability. The addition of certain electroactive fillers in the polymer matrix enhances the polar phase, which enhances the applicability of the hybrid for fuel cell and energy-harvesting applications. Poly(vinylidene fluoride) is one of the remarkable fluoropolymers in the field of energy applications such as fuel cell and piezoelectric energy harvesting. In the present review, a detailed discussion of the different kinds of nanofillers and their role in energy harvesting and fuel cell electrolyte membranes is projected.

High Performance and Self-Humidifying of Novel Cross-Linked and Nanocomposite Proton Exchange Membranes Based on Sulfonated Polysulfone

The introduction of inorganic additive or nanoparticles into fluorine-free proton exchange membranes (PEMs) can improve proton conductivity and have considerable effects on the performance of polymer electrolyte membrane fuel cells. Based on the sol-gel method and in situ polycondensation, novel cross-linked PEM and nanocomposite PEMs based on a sulfonated polysulfone (SPSU) matrix were prepared by introducing graphene oxide (GO) polymeric brushes and incorporating Pt-TiO2 nanoparticles into an SPSU matrix, respectively. The results showed that the incorporation of Pt-TiO2 nanoparticles could obviously enhance self-humidifying and thermal stability. In addition, GO polymer brushes fixed on polymeric PEM by forming a cross-linked network structure could not only solve the leakage of inorganic additives during use and compatibility problem with organic polymers, but also significantly improve proton conductivity and reduce methanol permeability of the nanocomposite PEM. Proton conductivity, water uptake and methanol permeability of the nanocomposite PEM can be up to 6.93 mS cm-1, 46.58% and be as low as 1.4157 × 10-6 cm2 s-1, respectively, which represent increases of about 70%, about 22% and a decrease of about 40%, respectively, compared with that of primary SPSU. Therefore, the synergic action of the covalent cross-linking, GO polymer brush and nanoparticles can significantly and simultaneously improve the overall performance of the composite PEM.

Investigation of Sulfonated Graphene Oxide as the Base Material for Novel Proton Exchange Membranes

This work deals with the development of graphene oxide (GO)-based self-assembling membranes as possible innovative proton conductors to be used in polymer electrolyte membrane fuel cells (PEMFCs). Nowadays, the most adopted electrolyte is Chemours' Nafion; however, it reveals significant deficiencies such as strong dehydration at high temperature and low humidity, which drastically reduces its proton conductivity. The presence of oxygenated moieties in the GO framework makes it suitable for functionalization, which is required to enhance the promising, but insufficient, proton-carrying features of GO. In this study, sulfonic acid groups (-SO3H) that should favor proton transport were introduced in the membrane structure via a reaction between GO and concentrated sulfuric acid. Six acid-to-GO molar ratios were adopted in the synthesis procedure, giving rise to final products with different sulfonation degrees. All the prepared samples were characterized by means of TGA, ATR-FTIR and Raman spectroscopy, temperature-dependent XRD, SEM and EDX, which pointed out morphological and microstructural changes resulting from the functionalization stage, confirming its effectiveness. Regarding functional features, electrochemical impedance spectroscopy (EIS) as well as measurements of ion exchange capacity (IEC) were carried out to describe the behavior of the various samples, with pristine GO and commercial Nafion® 212 used as reference. EIS tests were performed at five different temperatures (20, 40, 60, 80 and 100 °C) under high (95%) and medium (42%) relative humidity conditions. Compared to both GO and Nafion® 212, the sulfonated specimens demonstrate an increase in the number of ion-carrying groups, as proved by both IEC and EIS tests, which reveal the enhanced proton conductivity of these novel membranes. Specifically, an acid-to-GO molar ratio of 10 produces a six-fold improvement of IEC (4.23 meq g-1) with respect to pure GO (0.76 meq g-1), while a maximum eight-fold improvement (5.72 meq g-1) is achieved in SGO-15.

Poly(vinyl pyridine) and Its Quaternized Derivatives: Understanding Their Solvation and Solid State Properties

A series of N-methyl quaternized derivatives of poly(4-vinylpyridine) (PVP) were synthesized in high yields with different degrees of quaternization, obtained by varying the methyl iodide molar ratio and affording products with unexplored optical and solvation properties. The impact of quaternization on the physicochemical properties of the copolymers, and notably the solvation properties, was further studied. The structure of the synthesized polymers and the quaternization degrees were determined by infrared and nuclear magnetic spectroscopies, while their thermal characteristics were studied by differential scanning calorimetry and their thermal stability and degradation by thermogravimetric analysis (TG-DTA). Attention was given to their optical properties, where UV-Vis and diffuse reflectance spectroscopy (DRS) measurements were carried out. The optical band gap of the polymers was calculated and correlated with the degree of quaternization. The study was further orientated towards the solvation properties of the polymers in binary solvent mixtures that strongly depend on the degree of quaternization, enabling a better understanding of the key polymer (solute)-solvent interactions. The assessment of the underlying solvation phenomena was performed in a system of different ratios of DMSO/H₂O and the solvatochromic indicator used was Reichardt’s dye. Solvent polarity parameters have a significant effect on the visible spectra of the nitrogen quaternization of PVP studied in this work and a detailed path towards this assessment is presented.

Sono-oxidative desulfurization of fuels using heterogeneous and homogeneous catalysts: A comprehensive review

Recently, environmental pollution has increased significantly due to petroleum-based fuels widely used in vehicles. This environmental pollution is mainly due to the acidic SO2 gas generated by the combustion of fuels and emitted into the atmosphere. SO2 gas causes not only acid rain but also corrosion of metal parts of engines in vehicles. In addition, it functions as a catalyst poison in catalytic converters in exhaust system. Due to these damages, strict regulations have been introduced to reduce the amount of sulfur in fuels. As of 2005, the permissible amount of sulfur in diesel fuels in Europe and America has been limited to 10 and 15 ppm by weight, respectively. Due to the decreasing oil reserves in the world, high viscosity petroleums containing high sulfur and heavier fractions (i.e., low-quality oils) are increasing, thus making desulfurization difficult and leading to high costly process. Since time and economic loss are very important today, these two terms have to be reduced to a minimum. Recently, ultrasound wave in ODS shown as an alternative to HDS is utilized to further increase desulfurization in shorter times. Ultrasound wave locally creates high temperatures and high pressures (hot-spot theory) in liquid, causing the desulfurization reaction to accelerate further. In this review, the advantages and difficulties of oxidative desulfurization, the economics of ultrasound-assisted oxidative desulfurization are summarized and recommendations for improving the process are presented.

Supramolecular assemblies of organo-functionalised hybrid polyoxometalates: from functional building blocks to hierarchical nanomaterials

This review provides a comprehensive overview of recent advances in the supramolecular organisation and hierarchical self-assembly of organo-functionalised hybrid polyoxometalates (hereafter referred to as hybrid POMs), and their emerging role as multi-functional building blocks in the construction of new nanomaterials. Polyoxometalates have long been studied as a fascinating outgrowth of traditional metal-oxide chemistry, where the unusual position they occupy between individual metal oxoanions and solid-state bulk oxides imbues them with a range of attractive properties (e.g. solubility, high structural modularity and tuneable properties/reactivity). Specifically, the capacity for POMs to be covalently coupled to an effectively limitless range of organic moieties has opened exciting new avenues in their rational design, while the combination of distinct organic and inorganic components facilitates the formation of complex molecular architectures and the emergence of new, unique functionalities. Here, we present a detailed discussion of the design opportunities afforded by hybrid POMs, where fine control over their size, topology and their covalent and non-covalent interactions with a range of other species and/or substrates makes them ideal building blocks in the assembly of a broad range of supramolecular hybrid nanomaterials. We review both direct self-assembly approaches (encompassing both solution and solid-state approaches) and the non-covalent interactions of hybrid POMs with a range of suitable substrates (including cavitands, carbon nanotubes and biological systems), while giving key consideration to the underlying driving forces in each case. Ultimately, this review aims to demonstrate the enormous potential that the rational assembly of hybrid POM clusters shows for the development of next-generation nanomaterials with applications in areas as diverse as catalysis, energy-storage and molecular biology, while providing our perspective on where the next major developments in the field may emerge.

Alcohol-Triggered Capillarity through Porous Pyrolyzed Paper-Based Electrodes Enables Ultrasensitive Electrochemical Detection of Phosphate

The sensing field has shed light on an urgent necessity for field-deployable, user-friendly, sensitive, and scalable platforms that are able to translate solutions into the real world. Here, we attempt to meet these requests by addressing a simple, low-cost, and fast electrochemical approach to provide sensitive assays that consist of dropping a small volume (0.5 μL) of off-the-shelf alcohols on pyrolyzed paper-based electrodes before adding the sample (150 μL). This method was applied in the detection of phosphate after the formation of the phosphomolybdate complex (250-860 nm in size). Prior drops of isopropanol allow for the fast penetration of the sample through pores of this hydrophobic paper, delivering hindrance-free redox reactions across increasing active areas and ultimately improving the detection performance. The sensitivity (-1.9 10^-6 mA cm^-2 ppb^-1) and limit of detection (1.1 ppb) were improved, respectively, by factors of 33 and 99 over the data achieved without the addition of isopropanol, listing among the lowest values when compared with those results reported in the literature for phosphate (expressed in terms of the concentration of phosphorus). The approach enabled the quantification of this analyte in real samples with accuracies ranging from 87 to 103%. Furthermore, preliminary measurements demonstrated the successful performance of the electrodes with prior addition of other widely used alcohols, that is, methanol and ethanol. These results may extend the applicability of the method. In special, the scalability and eco-friendly character of the electrode fabrication combined with the sensitivity and simplicity of the analyses make the developed platform a promising alternative that may help to pave the way for a new generation of disposable sensors toward the daily monitoring of phosphate in water samples, thus contributing to prevent ecological side effects.

Triblock Copolymer/Polyoxometalate Nanocomposite Electrolytes with Inverse Hexagonal Cylindrical Nanostructures

The primary issue of polymer electrolytes is to achieve high ion conductivity while retaining mechanical properties. A nanocomposite electrolyte with the inverse hexagonal cylindrical phase (three-dimensionally continuous domains for ion conduction and embedded domains for mechanical support) is prepared through the electrostatic self-assembly of a polyoxometalate (H₃ PW₁₂ O₄₀ , PW) and a triblock copolymer poly(N-vinyl pyrrolidone)-block-polystyrene-block-poly(N-vinyl pyrrolidone) (PSP). The cylindrical nanocomposite exhibits a conductivity of 1.32 mS cm^-1 and a storage modulus of 4.6 × 10⁷  Pa at room temperature. These two values are higher than those of pristine PSP by two orders of magnitudes and a factor of six, respectively. PW clusters are used as multifunctional nano-additives (morphological inducer, proton conductor, and nano-enhancer) and their incorporation achieves the simultaneous improvement in both conductive and mechanical performance.

Recent Progress in the Development of Composite Membranes Based on Polybenzimidazole for High Temperature Proton Exchange Membrane (PEM) Fuel Cell Applications

The rapid increasing of the population in combination with the emergence of new energy-consuming technologies has risen worldwide total energy consumption towards unprecedent values. Furthermore, fossil fuel reserves are running out very quickly and the polluting greenhouse gases emitted during their utilization need to be reduced. In this scenario, a few alternative energy sources have been proposed and, among these, proton exchange membrane (PEM) fuel cells are promising. Recently, polybenzimidazole-based polymers, featuring high chemical and thermal stability, in combination with fillers that can regulate the proton mobility, have attracted tremendous attention for their roles as PEMs in fuel cells. Recent advances in composite membranes based on polybenzimidazole (PBI) for high temperature PEM fuel cell applications are summarized and highlighted in this review. In addition, the challenges, future trends, and prospects of composite membranes based on PBI for solid electrolytes are also discussed.

Photo/Bio-Electrochemical Systems for Environmental Remediation and Energy Harvesting

Water and energy systems are interdependent: water is utilized in each stage of energy production, and energy is required to extract, treat, and deliver water for many uses. However, energy and water systems are usually developed and managed independently. In the quest to develop environmentally friendly and energy-efficient solutions for water and energy issues, photoelectrochemical (PEC) energy conversion and microbial electrochemical (MEC) systems show profound potential for addressing environmental remediation problems and harvesting energy simultaneously. Herein, PEC, MEC, and their variant hybrid systems toward energy conversion and environmental remediation are summarized and discussed.

A Deep Insight into Different Acidic Additives as Doping Agents for Enhancing Proton Conductivity on Polybenzimidazole Membranes

The use of phosphoric acid doped polybenzimidazole (PBI) membranes for fuel cell applications has been extensively studied in the past decades. In this article, we present a systematic study of the physicochemical properties and proton conductivity of PBI membranes doped with the commonly used phosphoric acid at different concentrations (0.1, 1, and 14 M), and with other alternative acids such as phytic acid (0.075 M) and phosphotungstic acid (HPW, 0.1 M). The use of these three acids was reflected in the formation of channels in the polymeric network as observed by cross-section SEM images. The acid doping enhanced proton conductivity of PBI membranes and, after doping, these conducting materials maintained their mechanical properties and thermal stability for their application as proton exchange membrane fuel cells, capable of operating at intermediate or high temperatures. Under doping with similar acidic concentrations, membranes with phytic acid displayed a superior conducting behavior when compared to doping with phosphoric acid or phosphotungstic acid.

POM@MOF Hybrids: Synthesis and Applications

The hybrid materials that are created by supporting or incorporating polyoxometalates (POMs) into/onto metal–organic frameworks (MOFs) have a unique set of properties. They combine the strong acidity, oxygen-rich surface, and redox capability of POMs, while overcoming their drawbacks, such as difficult handling, a low surface area, and a high solubility. MOFs are ideal hosts because of their high surface area, long-range ordered structure, and high tunability in terms of the pore size and channels. In some cases, MOFs add an extra dimension to the functionality of hybrids. This review summarizes the recent developments in the field of POM@MOF hybrids. The most common applied synthesis strategies are discussed, together with major applications, such as their use in catalysis (organocatalysis, electrocatalysis, and photocatalysis). The more than 100 papers on this topic have been systematically summarized in a handy table, which covers almost all of the work conducted in this field up to now.

Co-immobilization of a Rh Catalyst and a Keggin Polyoxometalate in the UiO-67 Zr-Based Metal-Organic Framework: In Depth Structural Characterization and Photocatalytic Properties for CO2 Reduction

The Keggin-type polyoxometalate (POM) PW₁₂O₄₀^3- and the catalytic complex Cp*Rh(bpydc)Cl₂ (bpydc = 2,2'-bipyridine-5,5'-dicarboxylic acid) were coimmobilized in the Zr(IV) based metal organic framework UiO-67. The POM is encapsulated within the cavities of the MOF by in situ synthesis, and then, the Rh catalytic complex is introduced by postsynthetic linker exchange. Infrared and Raman spectroscopies, ³¹P and ¹³C MAS NMR, N₂ adsorption isotherms, and X-ray diffraction indicate the structural integrity of all components (POM, Rh-complex and MOF) within the composite of interest (PW₁₂,Cp*Rh)@UiO-67. DFT calculations identified two possible locations of the POM in the octahedral cavities of the MOF: one at the center of a UiO-67 pore with the Cp*Rh complex pointing toward an empty pore and one off-centered with the Cp*Rh pointing toward the POM. ³¹P-¹H heteronuclear (HETCOR) experiments ascertained the two environments of the POM, equally distributed, with the POM in interaction either with the Cp* fragment or with the organic linker. In addition, Pair Distribution Function (PDF) data were collected on the POM@MOF composite and provided key evidence of the structural integrity of the POM once immobilized into the MOF. The photocatalytic activity of the (PW₁₂,Cp*Rh)@UiO-67 composite for CO₂ reduction into formate and hydrogen were evaluated. The formate production was doubled when compared with that observed with the POM-free Cp*Rh@UiO-67 catalyst and reached TONs as high as 175 when prepared as thin films, showing the beneficial influence of the POM. Finally, the stability of the composite was assessed by means of recyclability tests. The combination of XRD, IR, ICP, and PDF experiments was essential in confirming the integrity of the POM, the catalyst, and the MOF after catalysis.

Fabrication of Conducting Nanochannels Using Accelerator for Fuel Cell Membrane and Removal of Radionuclides: Role of Nanoparticles

Latent tracks in pure polymer and its nanohybrid are fabricated by irradiating with swift heavy ions (SHI) (Ag⁺) having 140 MeV energy followed by selective chemical etching of the amorphous path, caused by the irradiation of SHI, to generate nanochannels of size ∼80 nm. Grafting is done within the nanochannels utilizing free radicals generated from the interaction of high-energy ions, followed by tagging of ionic species to make the nanochannels highly ion-conducting. The uniform dispersion of two-dimensional nanoparticles better controls the size and number density of the nanochannels and, thereby, converts them into an effective membrane. The nanoparticle and functionalization induce a piezoelectric β-phase in the membrane. The functionalized membrane removes the radioactive nuclide like ²⁴¹Am⁺³ (α-emitting source) efficiently (∼80% or 0.35 μg/cm²) from its solution/waste. This membrane act as a corrosion inhibitor (92% inhibition efficiency) together with its higher proton conduction (0.13 S/m) ability. The higher ion-exchange capacity, water uptake, ion conduction, and high sorption by the nanohybrid membrane are explored with respect to the extent of functionalization and control over nanochannel dimension. A membrane electrode assembly has been fabricated to construct a complete fuel cell, which exhibits superior power generation (power density of 45 mW/cm² at a current density of 298 mA/cm²) much higher than that of the standard Nafion, measured in a similar condition. Further, a piezoelectric matrix along with its anticorrosive property, high sorption characteristics, and greater power generation makes this class of material a smart membrane that can be used for many different applications.

Ionotropic Gelation of Chitosan for Next-Generation Composite Proton Conducting Flat Structures

(1) Background: Ionotropic gelation of cost-effective and eco-friendly biopolymer chitosan (Chit) is a novel and promising approach to the one-step synthesis of proton-conducting fuel cell bio-membranes.The method discovered by the author in 2011 and subsequently drowned among very few papers. This work aimed to relaunch this method through clear and effective communication of new unpublished results emphasizing the key aspects of this topic for successful dissemination of the results and significant future developments. (2) Methods and results: The mechanism of in-situ ionotropic gelation of Chit on an alumina substrate by phosphotungtate anions (PWA3-) was discussed and analyzed. The study sheds light on the effect of prolonged post-treatment in phosphotungstic acid (PWA) solution on the obtained chitosan/phosphotungstate (Chit-PWA) flat structures. Methods used included combined structural (XRD), thermal-gravimetric (DTG), electrochemical (in-situ EIS), compositional (EDX),morphological analysis (SEM), as well as the performances in a low temperature H2/O2 fuel cell(4) Conclusions: This contribution discloses novel possibilities aimed at increasing the impact of ionotropic gelation of chitosan on the scientific community working on the synthesis of novel proton conductive bio-composite membranes and structures.