Engineered ZnO and CuO Nanoparticles Ameliorate Morphological and Biochemical Response in Tissue Culture Regenerants of Candyleaf (Stevia rebaudiana)

How Nano-ZnO Affect Tomato Fruits (Solanum lycopersicum L.)? Analysis of Selected Fruit Parameters

Tomato (Solanum lycopersicum L.), as one of the most valuable horticulture crops, was chosen to investigate the effect of nanoparticles (NPs) in the form of nano-ZnO combined with conventional fertilizer on the quality of tomato fruits, including their antioxidant potential (total antioxidant activity, lycopene and β-carotene content), sugars content and allergenic potential (profilin and Bet v 1 content). Nano-ZnO was implemented during plant cultivation, applied by foliar spraying or directly via soil, at three different concentrations (50, 150 and 250 mg/L). The obtained results suggest that the usage of NPs during tomato plant cultivation had minor impacts on parameters such as total antioxidant activity or the content of selected allergens. Even though the total antioxidant activity was not affected by nano-ZnO, the malondialdehyde activity (MDA) content was notably decreased in fruits under nano-ZnO treatment. The content of lycopene and β-carotene was significantly affected by the use of nano-ZnO. Moreover, the usage of nano-ZnO significantly increased the total sugar content in fruits treated with nanoparticles via foliar spraying. Based on the obtained results, it can be stated that nano-ZnO, regardless of the method of application, significantly affected tomato fruits which can be beneficial for fruit production.

Influence of Abiotic and Biotic Elicitors on Organogenesis, Biomass Accumulation, and Production of Key Secondary Metabolites in Asteraceae Plants

The medicinal plants of the Asteraceae family are a valuable source of bioactive secondary metabolites, including polyphenols, phenolic acids, flavonoids, acetylenes, sesquiterpene lactones, triterpenes, etc. Under stressful conditions, the plants develop these secondary substances to carry out physiological tasks in plant cells. Secondary Asteraceae metabolites that are of the greatest interest to consumers are artemisinin (an anti-malarial drug from Artemisia annua L.-sweet wormwood), steviol glycosides (an intense sweetener from Stevia rebaudiana Bert.-stevia), caffeic acid derivatives (with a broad spectrum of biological activities synthesized from Echinacea purpurea (L.) Moench-echinacea and Cichorium intybus L.-chicory), helenalin and dihydrohelenalin (anti-inflammatory drug from Arnica montana L.-mountain arnica), parthenolide ("medieval aspirin" from Tanacetum parthenium (L.) Sch.Bip.-feverfew), and silymarin (liver-protective medicine from Silybum marianum (L.) Gaertn.-milk thistle). The necessity to enhance secondary metabolite synthesis has arisen due to the widespread use of these metabolites in numerous industrial sectors. Elicitation is an effective strategy to enhance the production of secondary metabolites in in vitro cultures. Suitable technological platforms for the production of phytochemicals are cell suspension, shoots, and hairy root cultures. Numerous reports describe an enhanced accumulation of desired metabolites after the application of various abiotic and biotic elicitors. Elicitors induce transcriptional changes in biosynthetic genes, leading to the metabolic reprogramming of secondary metabolism and clarifying the mechanism of the synthesis of bioactive compounds. This review summarizes biotechnological investigations concerning the biosynthesis of medicinally essential metabolites in plants of the Asteraceae family after various elicitor treatments.

Improvement and regulation of steviol glycoside biosynthesis in Stevia rebaudiana Bertoni

Stevia rebaudiana Bertoni is a natural sweetener plant that is progressively used not only for its sweetening properties but also for its medicinal properties. The plant contains steviol glycoside (SG) which is reported to be up to 300 times sweeter than sucrose. The plant is said to have no side effects on human health and has been approved by FDA. On the basis of previous studies and available databases, this review discusses the extensive understanding of the different approaches for enhancements of SG in S. rebaudiana. To improve the SG biosynthesis, application of different stress, elicitors, induction of polyploidy, cell culture, genetic engineering, and transcriptomic approaches have been addressed. A brief discussion about the cloning and characterization of important genes of the metabolic pathway of SG biosynthesis is also discussed along with various metabolic engineering pathways viz. methylerythritol 4- phosphate (MEP) and mevalonate (MVA) pathways. This review paper also discusses the different aspects as well as the effects of various nanoparticles on S. rebaudiana growth and development, as well as SG biosynthesis.

Effect of green-synthesized copper oxide nanoparticles on growth, physiology, nutrient uptake, and cadmium accumulation in Triticum aestivum (L.)

Cadmium (Cd) stress in crops has been serious concern while little is known about the copper oxide nanoparticles (CuO NPs) effects on Cd accumulation by crops. This study investigated the effectiveness of CuO NPs in mitigating Cd contamination in wheat (Triticum aestivum L.) cultivation through a pot experiment, presenting an eco-friendly solution to a critical agricultural concern. The CuO NPs, synthesized using green methods, exhibited a circular shape with a crystalline structure and a particle size ranging from 8 to 12 nm. The foliar spray of CuO NPs was applied in four different concentrations i.e. control, 25, 50, 75, 100 mg/L. The obtained data demonstrated that, in comparison to the control group, CuO NPs had a beneficial influence on various growth metrics and straw and grain yields of T. aestivum. The green CuO NPs improved T. aestivum growth and physiology under Cd stress, enhanced selected enzyme activities, reduced oxidative stress, and decreased malondialdehyde levels in the T. aestivum plants. CuO NPs lowered Cd contents in T. aestivum tissues and boosted the uptake of essential nutrients from the soil. Overall, foliar applied CuO NPs were effective in minimizing Cd contents in grains thereby reducing the health risks associated with Cd excess in humans. However, more in depth studies with several plant species and application methods of CuO NPs are required for better utilization of NPs in agricultural purposes.

Nanoparticles as novel elicitors in plant tissue culture applications: Current status and future outlook

Plant tissue culture is the primary, fundamental, and applied aspect of plant biology. It is an indispensable and valuable technique for investigating morphogenesis, embryogenesis, clonal propagation, crop improvements, generation of pathogen-free plants, gene transfer and expression, and the production of secondary metabolites. The extensive use of various nanoparticles (NPs) in fields such as cosmetics, energy, medicine, pharmaceuticals, electronics, agriculture, and biotechnology have demonstrated positive impacts in microbial decontamination, callus differentiation, organogenesis, somatic variations, biotransformation, cryopreservation, and enhanced synthesis of bioactive compounds. This review summarizes the current state of knowledge with regard to the use of nanoparticles in plant tissue culture, with a particular focus on the beneficial outcomes. The positive (beneficial) and negative (toxic) effects of engineered NPs in tissue culture medium, delivery of transgenes, NPs toxicity concerns, safety issues, and potential hazards arising from utilization of nanomaterials in agriculture through plant tissue culture are discussed in detail, along with the future prospects for these applications. In addition, the potential use of novel nanomaterials such as graphene, graphite, dendrimers, quantum dots, and carbon nanotubes as well as unique metal or metalloid NPs are proposed. Further, the potential mechanisms underlying NPs elicitation of tissue culture response in different applications are critically evaluated. The potential of these approaches in plant nanobiotechnology is only now becoming understood and it is clear that the role of these strategies in sustainably increasing crop production to combat global food security and safety in a changing climate will be significant.

Nano-stevia interaction: Past, present, and future

Nanotechnology has recently been emerged as a transformative technology that offers efficient and sustainable options for nano-bio interface. There has been a considerable interest in exploring the factors affecting elicitation mechanism and nanomaterials have been emerged as strong elicitors in medicinal plants. Stevia rebaudiana is well-known bio-sweetener and the presence of zero calorie, steviol glycosides (SGs) in the leaves of S. rebaudiana have made it a desirable crop to be cultivated on large scale to obtain its higher yield and maximal content of high quality natural sweeteners. Besides, phenolics, flavonoids, and antioxidants are abundant in stevia which contribute to its medicinal importance. Currently, scientists are trying to increase the market value of stevia by the enhancement in production of its bioactive compounds. As such, various in vitro and cell culture strategies have been adopted. In stevia agronanotechnology, nanoparticles behave as elicitors for the triggering of its secondary metabolites, specifically rebaudioside A. This review article discusses the importance of S. rebaudiana and SGs, conventional approaches that have failed to increase the desired yield and quality of stevia, modern approaches that are currently being applied to obtain utmost benefits of SGs, and future needs of advanced technologies for further exploitation of this wonder of nature.

The Antioxidant Potential of Tomato Plants (Solanum lycopersicum L.) under Nano-ZnO Treatment

Tomato (Solanum lycopersicum L.) is one of the most valuable horticulture crops, consumed in both its raw and processed forms. To increase yield and efficiency, conventional and organic fertilizers are utilized in modern agriculture. Traditional fertilizers increase crop yield but are harmful to the environment. These circumstances motivate the pursuit of an alternate solution. The purpose of this research was to investigate how the application of nanoparticles (nano-ZnO) combined with conventional fertilizer influence tomato plants' development, including the antioxidant potential of cultivated plants. Three factors such as different types of cultivars, dosage of applied nano-ZnO solution and the method of nanoparticles application were implemented. Multiple analysis of selected antioxidants content and their activities such as malondialdehyde (MDA), flavonoids, polyphenols, ascorbic acid, peroxidase (POX), superoxide dismutase (SOD) or catalase (CAT) were analyzed. The obtained data exhibited that all examined parameters were strongly dependent on three implemented factors: concentration of nano-ZnO suspension, the type of cultivated tomato and the method of nanoparticles application. For instance, the accumulation of MDA in cultivated plants was different among plants under nanoparticles treatment, but in one specific case (Malinowy Bossman cultivar treated with 50 mg/L nano-ZnO suspension) the content of this marker was decreased by 34% in comparison to the corresponding control. Nevertheless, the results presented in this study showed that the usage of certain doses of nano-ZnO suspension may increase the antioxidant potential of tomato plants.

Effects of polystyrene nanoplastics exposure on in vitro-grown Stevia rebaudiana plants

Nanoplastics (NPs) as environmental contaminants have received increased attention in recent years. Numerous studies have suggested possible negative effects of plants exposure to NPs, but more data are needed with various plants under different exposure conditions to clarify the underlying phytotoxicity mechanisms. In this study, we investigated the effect of polystyrene nanoplastics (PSNPs; 28.65 nm average diameter) exposure (10, 100 and 250 mg/L) on plant morphology and production of relevant metabolites (steviol glycosides, chlorophylls, carotenoids, and vitamins) of in vitro-grown Stevia rebaudiana plantlets. Additionally, we used dark field microscopy combined with fluorescence hyperspectral imaging for the visualization of internalized PSNPs inside plant tissues. At higher concentrations (>100 mg/L), PSNPs were shown to aggregate in roots and to be transported to leaves, having a significantly negative impact on plant growth (reduced size and biomass), while increasing the production of metabolites compared to controls, most probably because of response to stress. The production of steviol glycosides presented a biphasic dose-response suggestive of hormesis, with the highest values at 10 mg/L PSNPs (1.5-2.2-fold increase compared to controls), followed by a decline in production at higher concentrations (100 and 250 mg/L), but with values comparable to controls. These results are promising for future in vivo studies evaluating the effect of NP exposure on the production of steviol glycosides, the natural sweeteners from stevia.

IAA-decorated CuO nanocarriers significantly improve Chickpea growth by increasing antioxidative activities

Plant growth regulators tagged on metallic oxide nanoparticles (NPs) may function as nanofertilizers with reduced toxicity of NPs. CuO NPs were synthesized to function as nanocarriers of Indole-3-acetic acid (IAA). Powder X-ray diffraction (XRD) and scanning electron microscopy (SEM) revealed 30.4 nm size of NPs and sheet-like structure, respectively, of CuO-IAA NPs. Fourier-transform infrared spectroscopy (FTIR) confirmed CuO-IAA formation. IAA-decorated CuO NPs enhanced the physiological parameters of Chickpea plants, i.e., root length, shoot length, and biomass compared to naked CuO NPs. The variation in physiological response was due to change of phytochemical contents in plants. Phenolic content increased up to 17.98 and 18.13 µgGAE/mg DW at 20 and 40 mg/L of CuO-IAA NPs, respectively. However, significant decrease in antioxidant enzymes' activity was recorded compared to control. Presence of CuO-IAA NPs increased the reducing potential of plants at higher concentration of NPs, while decrease in total antioxidant response was observed. This study concludes that IAA conjugation to CuO NPs reduces toxicity of NPs. Furthermore, NPs can be explored as nanocarriers for plant modulators and slow release in future studies.

Impact of elicitors on essential oil compositions and phytochemical constituents in Lavandula stoechas L

Lavandula stoechas L. (LS) is an aromatic evergreen herb used broadly in the food, pharmaceutical, and perfume industries. However, the inducer effect of elicitors on secondary metabolites (SMs) biosynthesis in LS is nebulous. In addition, the precise mechanism of elicitors in cells remains unexplored. Hence, the primary objective of this study was to analyze the changes in phytochemical compositions of LSs treated with a biotic elicitor (chitin) and an abiotic one (copper nanoparticle) under in vitro and greenhouse conditions, with the aim of choosing an appropriate elicitor type, concentration, and exposure time for this species. In this study, the biochemical function of four chitin concentrations (i.e. 0, 50, 100 & 200 mg L^-1) and four copper oxide nanoparticle concentrations (i.e. 0, 25, 50, & 100 mg L^-1) at two exposure times (i.e. 5 & 10 days) was investigated in LS so as to compare with the un-elicited explants and the original plant materials. The analysis showed that the highest contents of the total phenolic (4.68 mg g^-1 FW), flavonoids (0.68 mg g^-1 FW), anthocyanins (36.51 mg g^-1 FW), and flavonols (0.29 mg g^-1 FW) compounds were observed in the elicited LSs. Besides, the role of elicitors in augmenting the percentage of SMs was intelligible, especially 'lavandulol', '1,8-cineole', 'germacrene D', and '(E)-nerolidol', which increased by 21.68%, 17.21%, 9.33%, and 8.11%, respectively. In conclusion, these findings indicate that utilizing elicitors at optimal concentrations and with timely durations of exposure can largely assist in improving the biotechnological production of SMs in LS, so that their potential for industrial use can be actualized.

Effects of Different Elicitors on Micropropagation, Biomass and Secondary Metabolite Production of Stevia rebaudiana Bertoni-A Review

Stevia rebaudiana Bertoni is a valuable plant whose products are increasingly used in medicine, pharmacy and the food industry. This necessitates the use of biotechnological approaches for its mass propagation. Establishing optimal conditions for in vitro cultivation is essential for obtaining high biomass and secondary metabolites production. A large number of articles considering the role of plant growth regulators and other additives in the culture medium in the growth and development of Stevia are available in the literature. However, there are no summarized data about the use of nanoparticles in Stevia tissue cultures. Therefore, this review also includes the research conducted so far on the effect of nanoparticles on Stevia micropropagation. Furthermore, the influence of different elicitors on secondary metabolite production and antioxidant activity of in vitro-cultivated Stevia plants have been discussed. By referring to the collected literature, we concluded that biotechnological approaches applied to S. rebaudiana cultivation might improve the agronomic traits of plants and steviol glycosides production.

Silicon oxide nanoparticles alleviate chromium toxicity in wheat (Triticum aestivum L.)

Increasing chromium (Cr) contamination in agricultural soils is a threat to crop yields and quality. Recently, nano-enabled strategies have been emerging with a great potential towards improving crop production and reclaiming the heavy metal contaminated soils. This study aimed to elucidate the potential of silicon oxide nanoparticles (SiONPs) on optimizing wheat growth and yield against Cr stress-induced phytotoxicity. Spherical crystalline SiONPs with the diameter in the range of 15-24 nm were applied at a dose of 250 mg kg^-1 soil for pot experiments planted with wheat seedlings, with or without Cr contaminations. The pot experiment results showed that SiONPs amendments significantly improved the plant length (26.8%), fresh (28.5%) and dry weight (30.4%) as compared with the control treatment. In addition, SiONPs also enhanced photosynthetic activity, antioxidant enzyme contents (CAT, APX, SOD and POD content) and reduced the reactive oxygen species (ROS) in wheat plants under Cr stress condition. The alleviation of Cr toxicity was deemed to be associated with the reduced Cr uptake into the roots (-39.6%) and shoots (-35.7%). The ultrastructural analyses revealed that the application of SiONPs in Cr contaminated soils maintained the normal cellular structure of the wheat plant, as compared with those of controls without SiONPs. These results provide the first evidence showing the great potential of SiONPs application towards alleviating the Cr stress for optimized wheat growth and yield in Cr contaminated soils.

Mitigation of the salinity stress in rapeseed (Brassica napus L.) productivity by exogenous applications of bio-selenium nanoparticles during the early seedling stage

In recent years, much attention has been directed toward using nanoparticles (NPs) as one of the most effective strategies to improve plant growth, especially under salt stress conditions. Further research has been conducted to develop NPs using various chemical ways; accordingly, knowledge about the beneficial effect of bioSeNPs in rapeseed is obscure. Selenium (Se) is a vital micronutrient with a series of physiological and antioxidative properties. Seed priming is emerging as a low-cost, efficient, and environment-friendly seed treatment in nanotechnology. The current study was carried out to examine the promising effects of nanopriming via bioSeNPs on the expression level of aquaporin genes, seed microstructure, seed germination, growth traits, physiochemical attributes, and minerals uptake of two rapeseed cultivars under salinity stress conditions. Our investigation monitored the positive effects of bioSeNPs on the expression level of aquaporin genes (BnPIP1-1 and BnPIP2-1) and water uptake during the seed imbibition (4 and 8 h of priming), which indicated higher imbibition potential and germination promotion with bioSeNPs application (most effective at 150 μmol/L). The total performance index was significantly enhanced with nano-treatments in rapeseed seedlings. Collectively, nano-application improved seed microstructure, seed germination, and photosynthetic efficiency directly correlated with higher seedlings biomass, especially with a higher concentration of bioSeNPs. The enhancement in α-amylase and free amino acid contents in nanoprimed seeds resulted in rapid seed germination. Moreover, bioSeNPs increased the osmotic adjustment and enhanced the efficiency of the plant's defense system by improving the activity of enzymatic and non-enzymatic antioxidants, thus enhancing ROS scavenging under salt stress. The obtained results may indicate the strengthening of seed vigor, improving seedling growth and physiochemical attributes via bioSeNPs. Our findings displayed that bioSeNPs modulated the Na⁺ and K⁺ uptake, which improved the rapeseed growth and showed a close relationship with the low contents of toxic Na⁺ ion; thus, it prevented oxidative damage due to salt stress. This comprehensive data can add more knowledge to understand the mechanisms behind plant-bioSeNPs interaction and provide physiological evidence for the beneficial roles of nanopriming using bioSeNPs on rapeseed germination and seedling development under salinity stress conditions. Such studies can be used to develop simple prepackaged nano primer products, which can be used before sowing to boost seed germination and crop productivity under stress conditions.

Elicitation of the in vitro Cultures of Selected Varieties of Vigna radiata L. With Zinc Oxide and Copper Oxide Nanoparticles for Enhanced Phytochemicals Production

This study was conducted to develop a protocol for in vitro shoot multiplication and callus induction of various mung bean varieties to obtain enhanced phytochemical content with the help of elicitors. For shoot multiplication, two types of explants (shoot tips and nodal tips) of three varieties of mung bean (Mung NCM-13, MgAT-7, and MgAT-4) were used. Both types of explants from in vitro and in vivo sources were cultured on the MS medium supplemented with different concentrations (0.25-3.0 mg/L, increment of 0.5 mg/L) and combinations of BAP and IBA as independent treatments. For callus induction, leaf explants (in vitro source) were cultured on MS medium supplemented with 2,4-D (1-3 mg/L) alone or in combination with BAP or NAA (0.5 and 1.0 mg/L). For the enhanced production of phenolics and glycosides, calli were cultured on MS media supplemented with zinc oxide (0.5 mg/L) and copper oxide nanoparticles (0.5 mg/L) as nano-elicitors. Results showed that in vitro explants responded better in terms of shoot length, number of shoots, and number of leaves per explant when compared to in vivo explants. Moreover, shoot tips were better than nodal explants to in vitro culturing parameters. All three varieties showed the optimized results in the MS medium supplemented with 1 mg/L BAP, while roots were produced only in cultures fortified with 1 mg/L IBA. The leaf explants of in vitro and soil-grown plantlets showed a maximum callogenic response of 90 and 80%, respectively, on MS medium supplemented with 2,4-D (3 mg/ml). Maximum phenolic content (101.4 μg of gallic acid equivalent/g) and glycoside content (34 mg of amygdalin equivalent/g of plant material) was observed in the calli cultured on MS medium supplemented with 3 mg/L of 2,4-D. Furthermore, the addition of zinc oxide (0.5 mg/L) and copper oxide (0.5 mg/L) nanoparticles to the callus culture medium significantly enhanced the phenolic content of Mung NCM-13 (26%), MgAT-7 (25.6%), and MgAT-4 (22.7%). Glycosidic content was also found to be increased in Mung NCM-13 (50%), MgAT-7 (37.5%), and MgAT-4 (25%) varieties when compared to the control. It is suggested that elicitation of in vitro cultures of mung beans with nanoparticles could be an effective strategy for the enhanced production of secondary metabolites.

Nanosized zinc oxide (n-ZnO) particles pretreatment to alfalfa seedlings alleviate heat-induced morpho-physiological and ultrastructural damages

Global efforts are in rapid progress to tackle the emerging conundrum of climate change-induced heat stress in grassland ecosystems. Zinc oxide nanoparticles (n-ZnO) are known to play a crucial role in plants' abiotic stress regulation, but its response in alfalfa against heat stress has not been explored. This study aimed at assessing the effects of n-ZnO on alfalfa under heat stress by various morpho-physiological and cellular approaches. Five-week-old alfalfa seedlings were subjected to foliar application of n-ZnO as a pretreatment before the onset of heat stress (BHS) to evaluate its effect on heat tolerance, and as a post-treatment after heat stress (AHS) to evaluate recovery efficiency. In vitro studies on Zn release from n-ZnO by Inductively coupled plasma mass spectroscopy (ICPMS) disclosed that the particle uptake and Zn release were concentration dependent. The uptake and translocation of n-ZnO examined by transmission electron microscope (TEM) reveling showed that n-ZnO was primarily localized in the vacuoles and chloroplasts. TEM images showed that ultrastructural modifications to chloroplast, mitochondria, and cell wall were reversible by highest dose of n-ZnO applied before heat stress, and damages to these organelles were not recoverable when n-ZnO was applied after heat stress. The results further enlightened that 90 mg L^-1 n-ZnO better prevented the heat stress-mediated membrane damage, lipid peroxidation and oxidative stress by stimulating antioxidant systems and enhancing osmolyte contents in both BHS and AHS. Although, application of 90 mg L^-1 n-ZnO in BHS was more effective in averting heat-induced damages and maintaining better plant growth and morpho-physiological attributes compared to AHS. Conclusively, foliar application of n-ZnO can be encouraged as an effective strategy to protect alfalfa from heat stress damages while minimizing the risk of nanoparticle transmission to environmental compartments, which could happen with soil application.

Interactive effects of zinc oxide nano particles and different light regimes on growth and silymarin biosynthesis in callus cultures of Silybum marianum L

Silybum marianum L. commonly known as milk thistle is a medicinally potent plant with a multitude of pharmacological applications. The present investigations demonstrated the effects of Zinc Oxide nanoparticles (ZnO NPs) on callus growth and biosynthesis of silymarin in milk thistle under various light conditions. The callus cultures developed on Murashige and Skoog (MS) basal media containing ZnO NPs (0.15 mg/L), under the dark condition maintained for two weeks, followed by transference into normal light produced the maximum callus fresh weight (2294 mg/L FW). Further, the metabolite profiling revealed that ZnO NPs significantly augmented the production of silymarin and upregulated the antioxidant system in the callus cultures. Maximum TPC (total phenolic content: 37 ± 0.20 mg/g DW), TFC (total flavonoid content: 8.9 ± 0.023), DPPH antioxidant activity (91.5 ± 1.75%), Superoxide dismutase activity (SOD: 4.1 ± 0.045 nM/min/mg FW) and the highest silymarin content (14.6 ± 0.023 mg/g DW) were recorded in the callus cultures developed on MS media supplemented with solitary ZnO NPs (0.15 mg/L). While the callus culture evolved in presence of only PGRs (2,4 D and BA: 2 mg/L, each) accumulated the lesser fresh weight (562 mg/L FW). A higher concentration of ZnO NPs (0.15 mg/L) enhanced the secondary metabolite accumulation and silymarin content in the callus of Silybum marianum. This is the first standardized protocol to be applied on the industrial level for the production of silymarin.

Impact of Metallic Nanoparticles on In Vitro Culture, Phenolic Profile and Biological Activity of Two Mediterranean Lamiaceae Species: Lavandula viridis L'Hér and Thymus lotocephalus G. López and R. Morales

Nanoparticles (NPs) recently emerged as new chemical elicitors acting as signaling agents affecting several processes in plant metabolism. The aim of this work was to investigate the impact of the addition of copper oxide (CuO), zinc oxide (ZnO) and iron oxide (Fe₃O₄) NPs (<100 nm) at different concentrations (1, 5 and 10 mg/L) to the culture media on several morphological, physiological and -biochemical parameters of in vitro shoot cultures of Lavandula viridis L’Hér and Thymus lotocephalus G. López and R. Morales (Lamiaceae), as well as on phenolic profile and bioactivity (antioxidant and enzyme inhibition capacities). Although some decreases in shoot number and length were observed in response to NPs, biomass production was not affected or was improved in both species. Most NPs treatments decreased total chlorophyll and carotenoid contents and increased malondialdehyde levels, an indicator of lipid peroxidation, in both species. HPLC-HR-MS analysis led to the identification of thirteen and twelve phenolic compounds, respectively, in L. viridis and T. lotocephalus extracts, being rosmarinic acid the major compound found in all the extracts. ZnO and Fe₃O₄ NPs induced an increase in total phenolic and rosmarinic acid contents in T. lotocephalus extracts. Additionally, some NPs treatments also increased antioxidant activity in extracts from this species and the opposite was observed for L. viridis. The capacity of the extracts to inhibit tyrosinase, acetylcholinesterase and butyrylcholinesterase enzymes was not considerably affected. Overall, NPs had a significant impact on different parameters of L. viridis and T. lotocephalus in vitro shoot cultures, although the results varied with the species and NPs type.

Influence of calcium and magnesium elimination on plant biomass and secondary metabolites of Stevia rebaudiana Bertoni

This study reports the increment in the secondary metabolites in Stevia rebaudiana plant after exposure to the elimination of Ca and Mg from Murashige and Skoog culture medium. The effect of nutrient stress on regenerants of S. rebaudiana is measured, which reveals significantly enhanced growth parameters, steviol glycosides (SGs) content, and nonenzymatic antioxidants; total phenolic content, total flavonoid content, total antioxidant capacity, total reducing power, and DPPH-free radical scavenging activity as compared with the control treatment. However, significantly highest amounts are obtained in a medium with only Ca deficiency. The amount of rebaudioside A (Reb A) and stevioside (ST) obtained in the case of Ca-deficient medium is 4.08 and 0.69%, respectively. It is followed by the results obtained from both Ca- and Mg-deprived medium [Reb A (3.23%) and ST (0.52%)] and the lowest values are obtained from medium lacking Mg only [Reb A (2.60%) and ST (0.40%)]. The most probable adaptation mechanism might be the production of reactive oxygen species by nutrients' stress, which results in secondary metabolites production as defensive moieties to overcome stress situation. This effective protocol needs to be refined to apply on an industrial scale in bioreactors for increasing quantities of commercially important pharmaceutical compounds.

Engineered Nanomaterials Suppress the Soft Rot Disease (Rhizopus stolonifer) and Slow Down the Loss of Nutrient in Sweet Potato

About 45% of the world’s fruit and vegetables are wasted, resulting in postharvest losses and contributing to economic losses ranging from $10 billion to $100 billion worldwide. Soft rot disease caused by Rhizopus stolonifer leads to postharvest storage losses of sweet potatoes. Nanoscience stands as a new tool in our arsenal against these mounting challenges that will restrict efforts to achieve and maintain global food security. In this study, three nanomaterials (NMs) namely C₆₀, CuO, and TiO₂ were evaluated for their potential application in the restriction of Rhizopus soft rot disease in two cultivars of sweet potato (Y25, J26). CuO NM exhibited a better antifungal effect than C₆₀ and TiO₂ NMs. The contents of three important hormones, indolepropionic acid (IPA), gibberellic acid 3 (GA-3), and indole-3-acetic acid (IAA) in the infected J26 sweet potato treated with 50 mg/L CuO NM were significantly higher than those of the control by 14.5%, 10.8%, and 24.1%. CuO and C₆₀ NMs promoted antioxidants in both cultivars of sweet potato. Overall, CuO NM at 50 mg/L exhibited the best antifungal properties, followed by TiO₂ NM and C₆₀ NM, and these results were further confirmed through scanning electron microscope (SEM) analysis. The use of CuO NMs as an antifungal agent in the prevention of Rhizopus stolonifer infections in sweet potatoes could greatly reduce postharvest storage and delivery losses.

Metabolic engineering for the synthesis of steviol glycosides: current status and future prospects

With the pursuit of natural non-calorie sweeteners, steviol glycosides (SGs) have become one of the most popular natural sweeteners in the market. The SGs in Stevia are a mixture of SGs synthesized from steviol (a terpenoid). SGs are diterpenoids. Different SGs depend on the number and position of sugar groups on the core steviol backbone. This diversity comes from the processing of glycoside steviol by various glycosyltransferases. Due to the differences in glycosylation, each SG has unique sensory properties. At present, it is more complicated to extract high-quality SGs from plants, so the excavation of the metabolic pathways of engineered microorganisms to synthesize SGs has been extensively studied. Specifically, the expression of different glycosyltransferases in microbes is key to the synthesis of various SGs by engineered microorganisms. To trigger more researches on the functional characterization of the enzymes encoded by these genes, this review describes the latest research progresses of the related enzymes involved in SG biosynthesis and metabolic engineering.Key points• Outlines the research progress of key enzymes in the biosynthetic pathway of SGs• Factors affecting the catalytic capacity of stevia glucosyltransferase• Provide guidance for the efficient synthesis of SGs in microbial cell factories.

Degradation mechanism of tris(2-chloroethyl) phosphate (TCEP) as an emerging contaminant in advanced oxidation processes: A DFT modelling approach

As a typical toxic organophosphate and emerging contaminant, tris(2-chloroethyl) phosphate (TCEP) is resistant to conventional water treatment processes. Studies on advanced oxidation processes (AOPs) to degrade TCEP have received increasing attention, but the detailed mechanism is not yet fully understood. This study investigated the mechanistic details of TCEP degradation promoted by OH by using the density functional theory (DFT) method. Our results demonstrated that in the initial step, energy barriers of the hydrogen abstraction pathways were no more than 7 kcal/mol. Cleavage of the P-O or C-Cl bond was possible to occur, whilst the C-O or C-C cleavage had to overcome an energy barrier above 50 kcal/mol, which was too high for mild experimental conditions. The bond dissociation energy (BDE) combined with the distortion/interaction energy (DIE) analysis disclosed origin of the various reactivities of each site of TCEP. The systematic calculations on the transformation of products generated in the initial step showed remarkable exothermic property. The novel information at molecular level provides insight on how these products are generated and offers valuable theoretical guidance to help develop more effective AOPs to degrade TCEP or other emerging environmental contaminant.

Advances and Perspectives in Tissue Culture and Genetic Engineering of Cannabis

For a long time, Cannabis sativa has been used for therapeutic and industrial purposes. Due to its increasing demand in medicine, recreation, and industry, there is a dire need to apply new biotechnological tools to introduce new genotypes with desirable traits and enhanced secondary metabolite production. Micropropagation, conservation, cell suspension culture, hairy root culture, polyploidy manipulation, and Agrobacterium-mediated gene transformation have been studied and used in cannabis. However, some obstacles such as the low rate of transgenic plant regeneration and low efficiency of secondary metabolite production in hairy root culture and cell suspension culture have restricted the application of these approaches in cannabis. In the current review, in vitro culture and genetic engineering methods in cannabis along with other promising techniques such as morphogenic genes, new computational approaches, clustered regularly interspaced short palindromic repeats (CRISPR), CRISPR/Cas9-equipped Agrobacterium-mediated genome editing, and hairy root culture, that can help improve gene transformation and plant regeneration, as well as enhance secondary metabolite production, have been highlighted and discussed.

Advanced Nanoscale Surface Characterization of CuO Nanoflowers for Significant Enhancement of Catalytic Properties

In this work, advanced nanoscale surface characterization of CuO Nanoflowers synthesized by controlled hydrothermal approach for significant enhancement of catalytic properties has been investigated. The CuO nanoflower samples were characterized by field-emission scanning electron microscopy (FE-SEM), X-ray powder diffraction (XRD), X-ray photoelectron spectroscopy (XPS), Raman spectroscopy, high-resolution transmission electron microscopy (HR-TEM), selected-area electron diffraction (SAED), high-angular annular dark field scanning transmission electron microscopy (HAADF-STEM) with elemental mapping, energy dispersive spectroscopy (STEM-EDS) and UV–Vis spectroscopy techniques. The nanoscale analysis of the surface study of monodispersed individual CuO nanoflower confirmed the fine crystalline shaped morphology composed of ultrathin leaves, monoclinic structure and purified phase. The result of HR-TEM shows that the length of one ultrathin leaf of copper oxide nanoflower is about ~650–700 nm, base is about ~300.77 ± 30 nm and the average thickness of the tip of individual ultrathin leaf of copper oxide nanoflower is about ~10 ± 2 nm. Enhanced absorption of visible light ~850 nm and larger value of band gap energy (1.68 eV) have further supported that the as-grown material (CuO nanoflowers) is an active and well-designed surface morphology at the nanoscale level. Furthermore, significant enhancement of catalytic properties of copper oxide nanoflowers in the presence of H2O2 for the degradation of methylene blue (MB) with efficiency ~96.7% after 170 min was obtained. The results showed that the superb catalytic performance of well-fabricated CuO nanoflowers can open a new way for substantial applications of dye removal from wastewater and environment fields.

Responses of Medicinal and Aromatic Plants to Engineered Nanoparticles

Medicinal and aromatic plants have been used by mankind since ancient times. This is primarily due to their healing effects associated with their specific secondary metabolites (some of which are also used as drugs in modern medicine), or their structures, served as a basis for the development of new effective synthetic drugs. One way to increase the production of these secondary metabolites is to use nanoparticles that act as elicitors. However, depending on the specific particle size, composition, concentration, and route of application, nanoparticles may have several other benefits on medicinal and aromatic plants (e.g., increased plant growth, improved photosynthesis, and overall performance). On the other hand, particularly at applications of high concentrations, they are able to damage plants mechanically, adversely affect morphological and biochemical characteristics of plants, and show cytotoxic and genotoxic effects. This paper provides a comprehensive overview of the beneficial and adverse effects of metal-, metalloid-, and carbon-based nanoparticles on the germination, growth, and biochemical characteristics of a wide range of medicinal and aromatic plants, including the corresponding mechanisms of action. The positive impact of nanopriming and application of nanosized fertilizers on medicinal and aromatic plants is emphasized. Special attention is paid to the effects of various nanoparticles on the production of valuable secondary metabolites in these plants cultivated in hydroponic systems, soil, hairy root, or in vitro cultures. The beneficial impact of nanoparticles on the alleviation of abiotic stresses in medicinal and aromatic plants is also discussed.

Nano-Elicitation as an Effective and Emerging Strategy for In Vitro Production of Industrially Important Flavonoids

Flavonoids represent a popular class of industrially important bioactive compounds. They possess valuable health-benefiting and disease preventing properties, and therefore they are an important component of the pharmaceutical, nutraceutical, cosmetical and medicinal industries. Moreover, flavonoids possess significant antiallergic, antihepatotoxic, anti-inflammatory, antioxidant, antitumor, antiviral, and antibacterial as well as cardio-protective activities. Due to these properties, there is a rise in global demand for flavonoids, forming a significant part of the world market. However, obtaining flavonoids directly from plants has some limitations, such as low quantity, poor extraction, over-exploitation, time consuming process and loss of flora. Henceforth, there is a shift towards the in vitro production of flavonoids using the plant tissue culture technique to achieve better yields in less time. In order to achieve the productivity of flavonoids at an industrially competitive level, elicitation is a useful tool. The elicitation of in vitro cultures induces stressful conditions to plants, activates the plant defense system and enhances the accumulation of secondary metabolites in higher quantities. In this regard, nanoparticles (NPs) have emerged as novel and effective elicitors for enhancing the in vitro production of industrially important flavonoids. Different classes of NPs, including metallic NPs (silver and copper), metallic oxide NPs (copper oxide, iron oxide, zinc oxide, silicon dioxide) and carbon nanotubes, are widely reported as nano-elicitors of flavonoids discussed herein. Lastly, the mechanisms of NPs as well as knowledge gaps in the area of the nano-elicitation of flavonoids have been highlighted in this review.

PEG 6000-Stimulated Drought Stress Improves the Attributes of In Vitro Growth, Steviol Glycosides Production, and Antioxidant Activities in Stevia rebaudiana Bertoni

This study addresses the favourable effects of drought stress imposed by polyethylene glycol (PEG) 6000 on the micropropagated shoots of Stevia rebaudiana. Various concentrations, i.e., 0, 0.5, 1, 2, and 4% of PEG 6000 were applied to the nodal shoot explants for four weeks, and the influence produced on shoots growth parameters, bioactive steviol glycosides (rebaudioside A and stevioside), and nonenzymatic antioxidant activities (total phenolic content (TPC), total flavonoid content (TFC), total antioxidant capacity (TAC), total reducing power (TRP) and 1,1-diphenyl-2-picrylhydrazyl(DPPH)-free radical scavenging activity (FRSA)) was elucidated. The significantly highest yield (92.4% direct shoot organogenesis) and secondary metabolites (2.94% Reb A, 2.52% ST, 95.3% DPPH-FRSA, 15.0% TPC, 13.0 µg/mg TFC, 22.3 µg/mg TAC, and 19.8 µg/mg TRP) production in response to abiotic stress elicitors was obtained in Murashige and Skoog (MS) medium treatment provided with 4% of PEG 6000. The overall trend was significant enhancement of growth dynamics and pharmaceutical compounds from control to 4% of PEG 6000 concentration as a defensive response against reactive oxygen species (ROS) produced in excess by water deficit. This is a very promising study to be employed in bioreactors to get markedly enhanced content of compounds of medicinal importance in the pharmaceutical market.