Sorption Behavior and Mechanisms of Organic Contaminants to Nano and Microplastics

Microplastics in the soil-water-food nexus: Inclusive insight into global research findings

Nuisance imposed by biotic and abiotic stressors on diverse agroecosystems remains an area of focus for the scientific fraternity. However, emerging contaminants such as microplastics (MP) have imposed additional dimension (alone or in combinations with other stressors) in agroecosystems and keep escalating the challenges to achieve sustainability. MP are recognized as persistent anthropogenic contaminants, fetch global attention due to their unique chemical features that keeps themselves unresponsive to the decaying process. This review has been theorized to assess the current research trends (along with possible gap areas), widespread use of MP, enhancement of the harshness of heavy metals (HMs), complex interactions with physico-chemical constituents of arable soil, accumulation in the edible parts of field crops, dairy products, and other sources to penetrate the food web. So far, the available review articles are oriented to a certain aspect of MP and lack a totality when considered from in soil-water-food perspective. In short, a comprehensive perspective of the adverse effects of MP on human health has been assessed. Moreover, an agro-techno-socio-health prospective-oriented critical assessment of policies and remedial measures linked with MP has provided an extra edge over other similar articles in influential future courses of research.

Microplastics are effective carriers of bisphenol A and facilitate its escape from wastewater treatment systems

Microplastics (MPs) pollution is a major issue in aquatic environments. Wastewater treatment plants are significant point sources of MPs, which may also be carriers of organic pollutants. We analyzed MP number, shape, color, and polymer type distribution in sewage wastewater treatment plants. The potential of MPs to act as carriers for typical organic pollutants in sewage, such as bisphenol A (BPA), was also assessed. The predominant MPs in the influent were fibers, primarily transparent and black in color, and composed of polyethylene, polypropylene, and polystyrene. During wastewater treatment, the concentration of MPs decreased from 10.89 items per L in the influent to 0.89 items per L in the treated effluent, with significant differences in treatment efficiency at different stages. In the simulated wastewater, the three predominant MPs exhibited certain adsorption capacities for bisphenol A. Changing the temperature and pH within the range expected for wastewater could interfere with the interactions between MPs and bisphenol A, with a limited impact on adsorption. The results show that although wastewater treatment plants intercept a significant amount of MP, a considerable number of them enter the aquatic environment daily because of the high volume of wastewater discharge. These MPs, which carry pollutants such as bisphenol A, may threaten the health of fish and other aquatic organisms. However, by scientifically adjusting operational parameters, wastewater treatment plants could become "controllable sources" of MP compound pollutants.

Microplastics and Co-pollutants in soil and marine environments: Sorption and desorption dynamics in unveiling invisible danger and key to ecotoxicological risk assessment

Microplastics (MPs) and their co-pollutants pose significant threats to soil and marine environments, necessitating understanding of their colonization processes to combat the plastic pandemic and protect ecosystems. MPs can act as invisible carriers, concentrating and transporting pollutants, leading to a more widespread and potentially toxic impact than the presence of either MPs or the pollutants alone. Analyzing the sorption and desorption dynamics of MPs is crucial for understanding pollutants amplification and predicting the fate and transport of pollutants in soil and marine environments. This review provides an in-depth analysis of the sorption and desorption dynamics of MPs, highlighting the importance of considering these dynamics in ecotoxicological risk assessment of MPs pollution. The review identifies limitations of current frameworks that neglect these interactions and proposes incorporating sorption and desorption data into robust frameworks to improve the ability to predict ecological risks posed by MPs and co-pollutants in soil and marine environments. However, failure to address the interplay between sorption and desorption can result in underestimation of the true impact of MPs and co-pollutants, affecting livelihoods and agro-employments, and exacerbate poverty and community disputes (SDGs 1, 2, 3, 8, 9, and 16). It can also affect food production and security (SDG 2), life below water and life on land (DSGs 14 and 15), cultural practices, and natural heritage (SDG 11.4). Hence, it is necessary to develop new approaches to ecotoxicological risk assessment that consider sorption and desorption processes in the interactions between the components in the framework to address the identified limitations.

Microplastics in agroecosystems: Soil-plant dynamics and effective remediation approaches

Increasing microplastic (MP) pollution, primarily from anthropogenic sources such as plastic film mulching, waste degradation, and agricultural practices, has emerged as a pressing global environmental concern. This review examines the direct and indirect effects of MPs on crops, both in isolation and in conjunction with other contaminants, to elucidate their combined toxicological impacts. Organic fertilizers predominantly contain 78.6% blue, 9.5% black, and 8.3% red MPs, while irrigation water in agroecosystems contains 66.2% white, 15.4% blue, and 8.1% black MPs, ranging from 0-1 mm to 4-5 mm in size. We elucidate five pivotal insights: Firstly, soil MPs exhibit affinity towards crop roots, seeds, and vascular systems, impeding water and nutrient uptake. Secondly, MPs induce oxidative stress in crops, disrupting vital metabolic processes. Thirdly, leachates from MPs elicit cytotoxic and genotoxic responses in crops. Fourthly, MPs disrupt soil biotic and abiotic dynamics, influencing water and nutrient availability for crops. Lastly, the cumulative effects of MPs and co-existing contaminants in agricultural soils detrimentally affect crop yield. Thus, we advocate agronomic interventions as practical remedies. These include biochar input, application of growth regulators, substitution of plastic mulch with crop residues, promotion of biological degradation, and encouragement of crop diversification. However, the efficacy of these measures varies based on MP type and dosage. As MP volumes increase, exploring alternative mitigation strategies such as bio-based plastics and environmentally friendly biotechnological solutions is imperative. Recognizing the persistence of plastics, policymakers should enact legislation favoring the mitigation and substitution of non-degradable materials with bio-derived or compostable alternatives. This review demonstrates the urgent need for collective efforts to alleviate MP pollution and emphasizes sustainable interventions for agricultural ecosystems.

Polystyrene microplastics exacerbated the toxicity of okadaic acid to the small intestine in mice

Microplastics (MPs) and okadaic acid (OA) are known to coexist in marine organisms, potentially impacting humans through food chain. However, the combined toxicity of OA and MPs remains unknown. In this study, mice were orally administered OA at 200 μg/kg bw and MPs at 2 mg/kg bw. The co-exposure group showed a significant increase in malondialdehyde (MDA) content and significant decreases in superoxide dismutase (SOD) activity and glutathione (GSH) level compared to the control, MPs and OA groups (p < 0.05). Additionally, the co-exposure group exhibited significantly higher levels of IL-1β and IL-18 compared to other groups (p < 0.05). These results demonstrated that co-exposure to MPs and OA induces oxidative stress and exacerbates inflammation. Histological and cellular ultrastructure analyses suggested that this combined exposure may enhance gut damage and compromise barrier integrity. Consequently, the concentration of OA in the small intestine of the co-exposure group was significantly higher than that in the OA group. Furthermore, MPs were observed in the lamina propria of the gut in the co-exposure group. Transcriptomic analysis revealed that the co-exposure led to increased expression of certain genes related to the NF-κB/NLRP3 pathway compared to the OA and MPs groups. Overall, this combined exposure may disrupt the intestinal barrier, and promote inflammation through the NF-κB/NLRP3 pathway. These findings provide precious information for the understanding of health risks associated with MPs and phycotoxins.

Microplastics supply contaminants in food chain: non-negligible threat to health safety

The occurrence of microplastics (MPs) and organic pollutants (OPs) residues is commonly observed in diverse environmental settings, where their interactions can potentially alter the behavior, availability, and toxicity of OPs, thereby posing risks to ecosystems. Herein, we particularly emphasize the potential for bioaccumulation and the biomagnification effect of MPs in the presence of OPs within the food chain. Despite the ongoing influx of novel information, there exists a dearth of data concerning the destiny and consequences of MPs in the context of food pollution. Further endeavors are imperative to unravel the destiny and repercussions of MPs/OPs within food ecosystems and processing procedures, aiming to gain a deeper understanding of the joint effect on human health and food quality. Nevertheless, the adsorption and desorption behavior of coexisting pollutants can be significantly influenced by MPs forming biofilms within real-world environments, including temperature, pH, and food constituents. A considerable portion of MPs tend to accumulate in the epidermis of vegetables and fruits, thus necessitating further research to comprehend the potential ramifications of MPs on the infiltration behavior of OPs on agricultural product surfaces.

Combined exposure of polystyrene microplastics and benzo[a]pyrene in rat: Study of the oxidative stress effects in the liver

Microplastics (MPs) and benzo[a]pyrene (B[a]P) are prevalent environmental pollutants. Numerous studies have extensively reported their individual adverse effects on organisms. However, the combined effects and mechanisms of exposure in mammals remain unknown. Thus, this study aims to investigate the potential effects of oral administration of 0.5μm polystyrene (PS) MPs (1 mg/mL or 5 mg/mL), B[a]P (1 mg/mL or 5 mg/mL) and combined (1 mg/mL or 5 mg/mL) on 64 male SD rats by gavage method over 6-weeks. The results demonstrate that the liver histopathological examination showed that the liver lobules in the combined (5 mg/kg) group had blurred and loose boundaries, liver cord morphological disorders, and significant steatosis. The levels of AST, ALT, TC, and TG in the combined dose groups were significantly higher than those in the other groups, the combined (5 mg/kg) group had the lowest levels of antioxidant enzymes and the highest levels of oxidants. The expression of Nrf2 was lowest and the expression of P38, NF-κB, and TNF-α was highest in the combined (5 mg/kg) group. In conclusion, these findings indicate that the combination of PSMPs and B[a]P can cause the highest levels of oxidative stress and elicit markedly enhanced toxic effects, which cause severe liver damage.

Microplastics and environmental effects: investigating the effects of microplastics on aquatic habitats and their impact on human health

Microplastics (MPs) are particles with a diameter of <5 mm. The disposal of plastic waste into the environment poses a significant and pressing issue concern globally. Growing worry has been expressed in recent years over the impact of MPs on both human health and the entire natural ecosystem. MPs impact the feeding and digestive capabilities of marine organisms, as well as hinder the development of plant roots and leaves. Numerous studies have shown that the majority of individuals consume substantial quantities of MPs either through their dietary intake or by inhaling them. MPs have been identified in various human biological samples, such as lungs, stool, placenta, sputum, breast milk, liver, and blood. MPs can cause various illnesses in humans, depending on how they enter the body. Healthy and sustainable ecosystems depend on the proper functioning of microbiota, however, MPs disrupt the balance of microbiota. Also, due to their high surface area compared to their volume and chemical characteristics, MPs act as pollutant absorbers in different environments. Multiple policies and initiatives exist at both the domestic and global levels to mitigate pollution caused by MPs. Various techniques are currently employed to remove MPs, such as biodegradation, filtration systems, incineration, landfill disposal, and recycling, among others. In this review, we will discuss the sources and types of MPs, the presence of MPs in different environments and food, the impact of MPs on human health and microbiota, mechanisms of pollutant adsorption on MPs, and the methods of removing MPs with algae and microbes.

Insights into the effect of crystallinity on the sorption of organic pollutants to microplastics

The environmental behavior of microplastics (MPs) has attracted global attention. Research has confirmed that MPs can strongly absorb almost every kind of pollutant and can serve as vectors for pollutant transport. In this research, the sorption isotherms of six organic pollutants with different structure on four virgin plastic particles with different crystallinity were determined. Results indicated that the hydrophobicity (KOW) of organic pollutants and the crystallinity of MPs were the two key factors that affected the sorption process of organic pollutants on MPs. Strong correlations were observed between KOW and the partition coefficient. Hydrophobic partition was one of the major mechanisms regardless of the type of organic chemical (hydrophobic, polar, or dissociable). What is more, the influence of the crystallinity of MPs on the sorption process increased with increasing hydrophobicity of the chemical. Combining this result with analyzing the related literature on the effect of crystallinity, it was concluded that the effect of crystallinity on the sorption of chemicals with strong hydrophobicity was obvious, whereas this effect was negligible for chemicals with weak hydrophobicity. The influence of the crystallinity of MPs on sorption could even exceed the influence of MPs type, so crystallinity should be considered carefully when discussing the sorption capacity of MPs. This study enhances the understanding of the sorption of organic pollutants by MPs.

Association of tetrabromobisphenol A (TBBPA) with micro/nano-plastics: A review of recent findings on ecotoxicological and health impacts

Despite the diverse research into the environmental impact of plastics, several stones have yet to be unraveled in terms of their ecotoxicological potential. Moreover, their detrimental impacts have become terrifying in recent years as the understanding of their tendency to associate and form cohorts with other emerging contaminants grew. Despite the hypothesis that microplastics may potentially adsorb organic pollutants, sequestering and making them not bioavailable for enhanced toxicity, evidence with pollutants such as Tetrabromobisphenol A (TBBPA) defers this assertion. TBBPA, one of the most widely used brominated flame retardants, has been enlisted as an emerging contaminant of serious environmental and human health concerns. Being also an additive to plasticware, it is not far to suspect that TBBPA could be found in association with micro/nanoplastics in our environment. Several pieces of evidence from recent studies have confirmed the micro/nanoplastics-TBBPA association and have exposed their compounded detrimental impacts on the environment and human health. This study, therefore, presents a comprehensive and up-to-date review of recent findings regarding their occurrence, factors that foster their association, including their sorption kinetics and isotherms, and their impacts on aquatic/agroecosystem and human health. The way forward and prospects for future studies were presented. This research is believed to be of significant interest to the readership due to its relevance to current environmental challenges posed by plastics and TBBPA. The study not only contributes valuable insights into the specific interaction between micro/nanoplastics and TBBPA but also suggests the way forward and prospects for future studies in this field.

From cradle to grave: Deciphering sex-specific disruptions of the nervous and reproductive systems through interactions of 4-methylbenzylidene camphor and nanoplastics in adult zebrafish

4-methylbenzylidene camphor (4-MBC) and micro/nanoplastics (MNPs) are common in personal care and cosmetic products (PCCPs) and consumer goods; however, they have become pervasive environmental contaminants. MNPs serve as carriers of 4-MBC in both PCCPs and the environment. Our previous study demonstrated that 4-MBC induces estrogenic effects in zebrafish larvae. However, knowledge gaps remain regarding the sex- and tissue-specific accumulation and potential toxicities of chronic coexposure to 4-MBC and MNPs. Herein, adult zebrafish were exposed to environmentally realistic concentrations of 4-MBC (0, 0.4832, and 4832 μg/L), with or without polystyrene nanoplastics (PS-NPs; 50 nm, 1.0 mg/L) for 21 days. Sex-specific accumulation was observed, with higher concentrations in female brains, while males exhibited comparable accumulation in the liver, testes, and brain. Coexposure to PS-NPs intensified the 4-MBC burden in all tested tissues. Dual-omics analysis (transcriptomics and proteomics) revealed dysfunctions in neuronal differentiation, death, and reproduction. 4-MBC-co-PS-NP exposure disrupted the brain histopathology more severely than exposure to 4-MBC alone, inducing sex-specific neurotoxicity and reproductive disruptions. Female zebrafish exhibited autism spectrum disorder-like behavior and disruption of vitellogenesis and oocyte maturation, while male zebrafish showed Parkinson's-like behavior and spermatogenesis disruption. Our findings highlight that PS-NPs enhance tissue accumulation of 4-MBC, leading to sex-specific impairments in the nervous and reproductive systems of zebrafish.

Adsorption of PFAS onto secondary microplastics: A mechanistic study

Microplastics (MPs) are abundant in aquatic systems. The ecological risks of MPs may arise from their physical features, chemical properties, and/or their ability to concentrate and transport other contaminants, such as per- and polyfluoroalkyl substances (PFAS). PFAS have been extracted from MPs found in natural waters. Still, there needs to be a mechanistic investigation of the effect of PFAS chemistry and water physicochemical properties on how PFAS partition onto secondary MPs. Here, we studied the influence of pH, natural organic matter (NOM), ionic strength, and temperature on the adsorption of PFAS on MPs generated from PET water bottles. The adsorption of PFAS to the MPs was thermodynamically spontaneous at 25 °C, based on Gibb's free energy (ΔG = -16 to -23 kJ/mol), primarily due to increased entropy after adsorption. Adsorption reached equilibrium within 7-9 h. Hence, PFAS will partition to the surface of secondary PET MPs within hours in fresh and saline waters. Natural organic matter decreased the capacity of secondary PET MPs for PFAS through electrosteric repulsion, while higher ionic strength favored PFAS adsorption by decreasing electrostatic repulsion. Increased pH increased electrostatic repulsion, which negated PFAS adsorption. The study provides fundamental information for developing models to predict interactions between secondary MPs and PFAS.

Adsorption of Macrolide Antibiotics and a Metabolite onto Polyethylene Terephthalate and Polyethylene Microplastics in Aquatic Environments

Microplastics (MPs) and antibiotics are emerging pollutants widely found in aquatic environments, potentially causing environmental harm. MPs may act as carriers for antibiotics, affecting their environmental distribution. This study investigates the adsorption of four macrolide antibiotics and a metabolite onto two types of MPs: polyethylene terephthalate (PET) and polyethylene (PE). Results revealed a linear isotherm adsorption model, with higher adsorption to PET than to PE (R2 > 0.936 for PE and R2 > 0.910 for PET). Hydrophobic interactions and hydrogen bonding could be the main adsorption mechanisms, with pore filling potentially involved. Reduced particle size enhances adsorption due to the increase of active adsorption sites. This increasement is more pronounced in PE than in PET, leading to an 11.6% increase in the average adsorption of all macrolides to PE, compared to only 5.1% to PET. Dissolved organic matter inhibits adsorption (azithromycin adsorption to PE was reduced from 12% to 5.1%), while salinity enhances it just until 1% salinity. pH slightly influences adsorption, with maximal adsorption at neutral pH. Results in real samples showed that complexity of the matrix decreased adsorption. Overall, these findings indicate that PE and PET MPs can be a vector of macrolides in aquatic environments.

Sorption of Polycyclic Aromatic Sulfur Heterocycles (PASH) on Nylon Microplastics at Environmentally Relevant Concentrations

Microplastics have garnered an infamous reputation as a sorbate for many concerning environmental pollutants and as a delivery vehicle for the aquatic food chain through the ingestion of these contaminated small particulates. While sorption mechanisms have been extensively studied for polycyclic aromatic hydrocarbons, polycyclic aromatic sulfur heterocycles (PASHs) have not been investigated, partly due to their low concentrations in aquatic ecosystems. Herein, an analytical methodology is presented for the analysis of dibenzothiophene, benzo[b]naphtho[1,2-b]thiophene, benzo[b]naphtho[2,1-b]thiophene, benzo[b]naphtho[2,3-b]thiophene, chryseno[4,5-bcd]thiophene and dinaphtho[1,2-b:1',2'-d]thiophene at relevant environmental concentrations based on solid phase extraction and high-performance liquid chromatography. The sorption uptake behavior and the sorption kinetics of the three benzo[b]napthothiophene isomers were then investigated on nylon microplastics to provide original information on their environmental fate and avoid human contamination through the food chain. The obtained information might also prove relevant to the development of successful remediation approaches for aquatic ecosystems.

The effects of Micro/Nano-plastics exposure on plants and their toxic mechanisms: A review from multi-omics perspectives

In recent years, plastic pollution has become a global environmental problem, posing a potential threat to agricultural ecosystems and human health, and may further exacerbate global food security problems. Studies have revealed that exposure to micro/nano-plastics (MPs/NPs) might cause various aspects of physiological toxicities, including plant biomass reduction, intracellular oxidative stress burst, photosynthesis inhibition, water and nutrient absorption reduction, cellular and genotoxicity, seed germination retardation, and that the effects were closely related to MP/NP properties (type, particle size, functional groups), exposure concentration, exposure duration and plant characteristics (species, tissue, growth stage). Based on a brief review of the physiological toxicity of MPs/NPs to plant growth, this paper comprehensively reviews the potential molecular mechanism of MPs/NPs on plant growth from perspectives of multi-omics, including transcriptome, metabolome, proteome and microbiome, thus to reveal the role of MPs/NPs in plant transcriptional regulation, metabolic pathway reprogramming, protein translational and post-translational modification, as well as rhizosphere microbial remodeling at multiple levels. Meanwhile, this paper also provides prospects for future research, and clarifies the future research directions and the technologies adopted.

Microplastics as carriers of toxic pollutants: Source, transport, and toxicological effects

Microplastic pollution has emerged as a new environmental concern due to our reliance on plastic. Recent years have seen an upward trend in scholarly interest in the topic of microplastics carrying contaminants; however, the available review studies have largely focused on specific aspects of this issue, such as sorption, transport, and toxicological effects. Consequently, this review synthesizes the state-of-the-art knowledge on these topics by presenting key findings to guide better policy action toward microplastic management. Microplastics have been reported to absorb pollutants such as persistent organic pollutants, heavy metals, and antibiotics, leading to their bioaccumulation in marine and terrestrial ecosystems. Hydrophobic interactions are found to be the predominant sorption mechanism, especially for organic pollutants, although electrostatic forces, van der Waals forces, hydrogen bonding, and pi-pi interactions are also noteworthy. This review reveals that physicochemical properties of microplastics, such as size, structure, and functional groups, and environmental compartment properties, such as pH, temperature, and salinity, influence the sorption of pollutants by microplastic. It has been found that microplastics influence the growth and metabolism of organisms. Inadequate methods for collection and analysis of environmental samples, lack of replication of real-world settings in laboratories, and a lack of understanding of the sorption mechanism and toxicity of microplastics impede current microplastic research. Therefore, future research should focus on filling in these knowledge gaps.

Understanding Interface Exchanges for Assessing Environmental Sorption of Additives from Microplastics: Current Knowledge and Perspectives

Although the impacts of plastic pollution have long been recognized, the presence, pervasiveness, and ecotoxicological consequences of microplastic-i.e., plastic particles < 5 mm-contamination have only been explored over the last decade. Far less focus has been attributed to the role of these materials and, particularly, microplastics, as vectors for a multitude of chemicals, including those (un)intentionally added to plastic products, but also organic pollutants already present in the environment. Owing to the ubiquitous presence of microplastics in all environmental matrices and to the diverse nature of their chemical and physical characteristics, thoroughly understanding the mechanistic uptake/release of these compounds is inherently complex, but necessary in order to better assess the potential impacts of both microplastics and associated chemicals on the environment. Herein, we delve into the known processes and factors affecting these mechanisms. We center the discussion on microplastics and discuss some of the most prominent ecological implications of the sorption of this multitude of chemicals. Moreover, the key limitations of the currently available literature are described and a prospective outlook for the future research on the topic is presented.

Rapid adsorptive removal of eosin yellow and methyl orange using zeolite Y

In this study, zeolite Y was synthesised using a novel method. The heat generated from the reaction of H2SO4 with metakaolin was used as a heat source instead of applying external heat for the dealuminated process. The synthesised zeolite Y produced was analysed by scanning electron microscope (SEM), X-ray diffraction (XRD), Fourier-infrared spectroscopy (FTIR), energy dispersive X-ray spectroscopy (EDS) and Brunauer-Emmett-Teller (BET). Zeolite Y synthesis was mesoporous because of its pore diameter (30.53 nm), as shown in the BET results. Surface area and pore size decrease after adsorption due to dye deposition on the adsorbent's surface. FTIR has bonds like O-H, C-H, -CH3, and -COOH responsible for adsorption. The maximum adsorption capacity of eosin yellow (EY) and methyl orange (MO) on to zeolite Y by the Langmuir isotherm was 52.91 mg/g and 20.62 mg/g respectively, at pH 2.5 and 8 for EY and MO dye. The batch adsorption studies were conducted, and the influence of different parameters (i.e., adsorbent dose, adsorption time, initial dye concentration, pH and temperature) was investigated. Experimental data were analysed by two linear model equations (Langmuir and Freundlich isotherms), and it was found that the Langmuir isotherm model best describes the adsorption data for methyl orange and Freundlich isotherm for eosin yellow, respectively. Adsorption rate constants were determined using linear pseudo-first-order and pseudo-second-order. The results showed that MO and EY dye adsorption onto zeolite Y followed a pseudo-second-order kinetic model. Thermodynamic studies show that adsorption was an exothermic reaction (enthalpy < 0) and feasible ([Formula: see text]) at various temperatures under investigation.

Intensive vegetable production under plastic mulch: A field study on soil plastic and pesticide residues and their effects on the soil microbiome

Intensive agriculture relies on external inputs to reach high productivity and profitability. Plastic mulch, mainly in the form of Low-Density Polyethylene (LDPE), is widely used in agriculture to decrease evaporation, increase soil temperature and prevent weeds. The incomplete removal of LDPE mulch after use causes plastic contamination in agricultural soils. In conventional agriculture, the use of pesticides also leaves residues accumulating in soils. Thus, the objective of this study was to measure plastic and pesticide residues in agricultural soils and their effects on the soil microbiome. For this, we sampled soil (0-10 cm and 10-30 cm) from 18 parcels from 6 vegetable farms in SE Spain. The farms were under either organic or conventional management, where plastic mulch had been used for >25 years. We measured the macro- and micro-light density plastic debris contents, the pesticide residue levels, and a range of physiochemical properties. We also carried out DNA sequencing on the soil fungal and bacterial communities. Plastic debris (>100 μm) was found in all samples with an average number of 2 × 103 particles kg-1 and area of 60 cm2 kg-1. We found 4-10 different pesticide residues in all conventional soils, for an average of 140 μg kg-1. Overall, pesticide content was ∼100 times lower in organic farms. The soil microbiomes were farm-specific and related to different soil physicochemical parameters and contaminants. Regarding contaminants, bacterial communities responded to the total pesticide residues, the fungicide Azoxystrobin and the insecticide Chlorantraniliprole as well as the plastic area. The fungicide Boscalid was the only contaminant to influence the fungal community. The wide spread of plastic and pesticide residues in agricultural soil and their effects on soil microbial communities may impact crop production and other environmental services. More studies are required to evaluate the total costs of intensive agriculture.

How natural and anthropogenic factors should drive microplastic behavior and fate: The scenario of Brazilian urban freshwater

Brazil maintains its position at the top of the global ranking of plastic producers, yet recycling efforts have been incipient. Recent data reveals an annual production of approximately 14 million tons of plastic waste, not accounting for the surge in the usage of plastic masks and related materials due to the COVID-19 pandemic. However, what remains largely unreported is that over half of post-consumer plastic packaging in Brazil is managed without any monitoring, and it remains unclear how this will contribute to the occurrence of plastic waste and microplastics in Brazilian freshwaters. This scenario requires the consideration of several other crucial factors. Studies have been carried out mainly in marine and estuarine waters, while data on freshwaters are lacking. Brazil has continental dimensions and the highest water availability on the planet, yet the demand for water is greatest in regions with medium to low supply. Many densely populated Brazilian urban areas face chronic flood problems, possess inadequate levels of wastewater treatment, and display inadequate solid waste management practices. Consequently, urban freshwater with tropical characteristics in Brazil presents an intriguing scenario and is complementary to the most commonly studied marine environments. In this study, we explore the nuances of pollution in Brazilian urban freshwater and discuss how various parameters, such as organic matter, suspended solids, temperature, and pH, among others, influence the behavior of microplastics and their interactions with organic and inorganic contaminants. Furthermore, we address how microplastic conditions, such as biofouling, the type of plastic, or degradation level, may impact their behavior. By analyzing how these conditions change, we propose priority themes for investigating the occurrence of microplastics in Brazilian urban freshwater systems under different degrees of human impact. Ultimately, this study aims to establish a network dedicated to standardized monitoring of microplastic pollution in Brazilian urban freshwaters.

The solvent- and surface-dependent adsorption of the lipopeptide antibiotic daptomycin: The general necessity of adsorption tests

The impact of poor or non-reproducible analyte recoveries due to non-specific drug adsorption on various analytical assays is often underestimated. Even internationally approved guidelines for pharmaceutical analysis such as the EMA guideline on bioanalytical method validation, the ICH guideline M10 on bioanalytical method validation and study sample analysis or the FDA bioanalytical method validation guidance do not adequately encourage more detailed investigations. Furthermore, other areas of research in which the concentration of active pharmaceutical compounds plays a crucial role, for example screening for minimal inhibitory concentrations of bacterial isolates, are potentially affected as well. The aim of this study was to demonstrate the general necessity of drug adsorption tests, using the lipopeptide antibiotic daptomycin as an example. A wide range of typical materials used in processing samples in pharmaceutical and biological analysis, as well as various solvents and biological matrices were included in the experiments. A fully validated LC-MS/MS method was applied for the determination of daptomycin concentrations, which were subsequently used to calculate the recovery. Recovery results (n = 3) ranged from 0.00% to 102.12% with a maximum relative standard deviation of 12.78%. These findings demonstrate that recovery can vary greatly depending on the solvent and the contact material, indicating the need to be optimized and, if applicable, validated. Hence, high reproducibility can only be achieved if all materials (and their manufacturers) used in a method are specified, not just those used in steps considered critical.

Distribution and potential health risks of perfluoroalkyl substances (PFASs) in water, sediment, and fish in Dongjiang River Basin, Southern China

Per- and polyfluoroalkyl substances (PFASs) have attracted worldwide attention due to their high stability, refractory degradation, and bioaccumulation. The Dongjiang River is one of the most important water sources in the Pearl River Delta region. It flows from Jiangxi Province to Guangdong Province and finally into the Pearl River, providing domestic water for cities such as Guangzhou, Shenzhen, and Hong Kong. In this study, 17 PFASs in water, sediment, and fish in the Dongjiang River Basin in southern China were investigated using high-performance liquid chromatography-mass spectrometry. Total PFAS concentrations ranged from 20.83 to 372.8 ng/L in water, from 1.050 to 3.050 ng/g in sediments, and from 12.28 to 117.4 ng/g in fish. Among six species of fish, Oreochromis mossambicus (mean: 68.55 ng/g) had the highest concentration of PFASs, while Tilapia zillii (36.90 ng/g) had the lowest concentration. Perfluorooctanoic acid (PFOA) predominates in water and sediments, while perfluorooctanesulfonic acid (PFOS) predominates in fish. Long-chain perfluorocarboxylates (PFCAs) and perfluorosulfonates (PFSAs) showed higher bioaccumulation, and the field-sourced sediment-water partition coefficients (Kd) and bioaccumulation factors (BAFs) of PFASs increased with the length of perfluorocarbon chains. PFAS concentration in the lower reaches (urban area) of the Dongjiang River is higher than that in the upper and middle reaches (rural area). The calculated hazard ratio (HR) of PFOS and PFOA levels in fish in the Dongjiang River Basin was far less than 1; hence, the potential risk to human health was limited.

Laboratory Studies about Microplastic Aging and Its Effects on the Adsorption of Chlorpyrifos

The constant change in microplastics (MP) due to exposure to environmental conditions leads to physical and chemical changes that enhance their ability to transport other pollutants, increasing the concern about their widespread presence in the environment. This work aimed to simulate the aging process of six MP (polyamide 6, unplasticized polyvinyl chloride, low-density polyethylene, polystyrene, polyethylene-co-vinyl acetate, polypropylene) in freshwater and seawater ecosystems at laboratory scale and evaluate its effects through optical microscope observation, Fourier transform infrared spectroscopy-Attenuated Total Reflectance (FTIR-ATR), Raman spectroscopy, and thermal gravimetric analysis (TGA). Through a combined experimental study of aged MP, the degradation by UV interaction was evidenced by the appearance of new infrared bands in the FTIR spectra assigned to ketones and hydroxyl groups. While Raman analysis and microscope images reveal the appearance of pores, wrinkles, and roughness in the MP surfaces. Variations in the temperature of the maximum weight loss of the MP were observed in the TGA analysis. The adsorption of chlorpyrifos (CPF), a common pesticide widely used in agriculture, by the pristine and aged MP was also studied. The highest affinity for CPF was observed for pristine LDPE and the lowest for PP. The batch adsorption studies revealed an increase in adsorption capacity as a consequence of the aging process for both MP. These results proved that the weathering effects caused changes in the behavior of MP, namely in the interaction with other pollutants.

Effect of Aging on Physicochemical Properties and Size Distribution of PET Microplastic: Influence on Adsorption of Diclofenac and Toxicity Assessment

Microplastics (MPs) are detected in the water, sediments, as well as biota, mainly as a consequence of the degradation of plastic products/waste under environmental conditions. Due to their potentially harmful effects on ecosystems and organisms, MPs are regarded as emerging pollutants. The highly problematic aspect of MPs is their interaction with organic and inorganic pollutants; MPs can act as vectors for their further transport in the environment. The objective of this study was to investigate the effects of ageing on the changes in physicochemical properties and size distribution of polyethylene terephthalate (PET), as well as to investigate the adsorption capacity of pristine and aged PET MPs, using pharmaceutical diclofenac (DCF) as a model organic pollutant. An ecotoxicity assessment of such samples was performed. Characterization of the PET samples (bottles and films) was carried out to detect the thermooxidative aging effects. The influence of the temperature and MP dosage on the extent of adsorption of DCF was elucidated by employing an empirical modeling approach using the response surface methodology (RSM). Aquatic toxicity was investigated by examining the green microalgae Pseudokirchneriella subcapitata. It was found that the thermooxidative ageing process resulted in mild surface changes in PET MPs, which were reflected in changes in hydrophobicity, the amount of amorphous phase, and the particle size distribution. The fractions of the particle size distribution in the range 100-500 μm for aged PET are higher due to the increase in amorphous phase. The proposed mechanisms of interactions between DCF and PET MPs are hydrophobic and π-π interactions as well as hydrogen bonding. RSM revealed that the adsorption favors low temperatures and low dosages of MP. The combination of MPs and DCF exhibited higher toxicity than the individual components.

Interaction of Microbes with Microplastics and Nanoplastics in the Agroecosystems-Impact on Antimicrobial Resistance

Microplastics (MPs) and nanoplastics (NPs) are hotspots for the exchange of antimicrobial resistance genes (ARGs) between different bacterial taxa in the environment. Propagation of antimicrobial resistance (AMR) is a global public health issue that needs special attention concerning horizontal gene transfer (HGT) under micro-nano plastics (MNPs) pressure. Interactions between MNPs and microbes, or mere persistence of MNPs in the environment (either water or soil), influence microbial gene expressions, affecting autochthonous microbiomes, their resistomes, and the overall ecosystem. The adsorption of a range of co-contaminants on MNPs leads to the increased interaction of pollutants with microbes resulting in changes in AMR, virulence, toxin production, etc. However, accurately estimating the extent of MNP infestation in agroecosystems remains challenging. The main limitation in estimating the level of MNPs contamination in agroecosystems, surface and subsurface waters, or sediments is the lack of standardized protocols for extraction of MPs and analytical detection methods from complex high organic content matrices. Nonetheless, recent advances in MPs detection from complex matrices with high organic matter content are highly promising. This review aims to provide an overview of relevant information available to date and summarize the already existing knowledge about the mechanisms of MNP-microbe interactions including the different factors with influence on HGT and AMR. In-depth knowledge of the enhanced ARGs propagation in the environment under the influence of MNPs could raise the needed awareness, about future consequences and emergence of multidrug-resistant bacteria.

Nano and microplastics occurrence in wastewater treatment plants: A comprehensive understanding of microplastics fragmentation and their removal

Nano/microplastic (NP/MP) pollution is a growing concern for the water environment. Wastewater treatment plants (WWTPs) are considered the major recipients of MP before discharging into local waterbodies. MPs enter WWTPs mainly from synthetic fibers through washing activities and personal care products. To control and prevent NP/MP pollution, it is essential to have a comprehensive understanding of their characteristics, fragmentation mechanisms, and the effectiveness of the current treatment processes used in WWTPs for NP/MP removal. Therefore, the objectives of this study are to (i) understand the detailed mapping of NP/MP in the WWTP, (ii) understand the fragmentation mechanisms of MP into NP, and (iii) investigate the removal efficiency of NP/MP by existing processes in the WWTP. This study found that fiber is the dominant shape of MP, and polyethylene, polypropylene, polyethylene terephthalate, and polystyrene are the major polymer type of MP in wastewater samples. Crack propagation and mechanical breakdown of MP due to water shear forces induced by treatment facilities (e.g., pumping, mixing, and bubbling) could be the major causes for NP generation in the WWTP. Conventional wastewater treatment processes are ineffective for the complete removal of MPs. Although these processes are capable of removing ∼95% of MPs, they tend to accumulate in sludge. Thus, a significant number of MPs may still be released into the environment from WWTPs on a daily basis. Therefore, this study suggested that using DAF process in the primary treatment unit can be an effective strategy to control MP in the initial stage before it goes to the secondary and tertiary stage.

Sources, distribution, and environmental effects of microplastics: a systematic review

Microplastics (MPs) are receiving increasing attention from researchers. They are environmental pollutants that do not degrade easily, are retained for prolonged periods in environmental media such as water and sediments, and are known to accumulate in aquatic organisms. The aim of this review is to show and discuss the transport and effects of microplastics in the environment. We systematically and critically review 91 articles in the field of sources, distribution, and environmental behavior of microplastics. We conclude that the spread of plastic pollution is related to a myriad of processes and that both primary and secondary MPs are prevalent in the environment. Rivers have been indicated as major pathways for the transport of MPs from terrestrial areas into the ocean, and atmospheric circulation may be an important avenue for transporting MPs between environmental compartments. Additionally, the vector effect of MPs can change the original environmental behavior of other pollutants, leading to severe compound toxicity. Further in-depth studies on the distribution and chemical and biological interactions of MPs are highly suggested to improve our understanding of how MPs behave in the environment.

Microplastics as carriers of iron and copper nanoparticles in aqueous solution

In recent years, microplastics have attracted a lot of attention due to their excessive spread in the environment, especially in aquatic ecosystems. By sorbing metal nanoparticles on their surface, microplastics can act as carriers of these pollutants in aquatic environments and thus cause adverse effects on the health of living organisms and humans. This study, investigated the adsorption of iron and copper nanoparticles on three different microplastics i.e. polypropylene (PP), polyvinyl chloride (PVC) and polystyrene (PS). In this regard, the effects of parameters such as; pH, duration of contact and initial concentration of nanoparticle solution were investigated. By using atomic absorption spectroscopic analysis, the amount of adsorption of metal nanoparticles by microplastics was measured. The maximum amount of adsorption occurred at pH = 11, after a duration time of 60 min and at the initial concentration of 50 mg L^-1. Scanning electron microscope (SEM) images showed that microplastics have different surface characteristics. The spectra obtained from Fourier transform infrared analysis (FTIR) before and after the adsorption of iron and copper nanoparticles on microplastics were not different, which showed that the adsorption of iron and copper nanoparticles on microplastics was physically and no new functional group was formed. X-ray energy diffraction spectroscopy (EDS) showed the adsorption of iron and copper nanoparticles on microplastics. By examining Langmuir and Freundlich adsorption isotherms and adsorption kinetics, it was found that the adsorption of iron and copper nanoparticles on microplastics is more consistent with the Freundlich adsorption isotherm. Also, pseudo-second-order kinetics is more suitable than pseudo-first-order kinetics. The adsorption ability of microplastics was as follows: PVC > PP > PS, and in general copper nanoparticles were adsorbed more than iron nanoparticles on microplastics.

Sorption of Total Petroleum Hydrocarbons in Microplastics

As is the case for many others in the world, Mexican seas face complex pollution challenges; two of the contaminants that require special attention for their prevalence, possible chemical interactions, and relation to the country's economy are leaked petroleum and microplastics (MP). This research assessed the sorption of total petroleum hydrocarbons (TPH) as fuel oil on microplastics in laboratory and field scenarios. Preliminary tests allowed the development and validation of a methodology to measure the sorbed fuel oil by Soxhlet extraction, with a 99.65% recovery rate. The amount of TPH sorbed in the lab followed the order LDPE > PS > PP > PVC > PET > HDPE, with the highest concentration found on LDPE. The sorption of fuel oil on microplastics is correlated to the surface area of the plastic particles and could also be related to the crystallinity of plastics. Sorption, for all plastics, was consistent with a second-order kinetic model. The analysis of field samples collected on beaches of the Gulf of Mexico varied from 1660 to 35,258 mg/kg MP. It must be noticed that, unlike others, this research quantified a family of contaminants, which could explain the high concentrations observed on microplastics.

Weathering and degradation of polylactic acid masks in a simulated environment in the context of the COVID-19 pandemic and their effects on the growth of winter grazing ryegrass

The COVID-19 pandemic has led to explosive growth in the production and consumption of disposable medical masks, which has caused new global environmental problems due to the improper disposal of these masks and lack of effective mask recycling methods. To reduce the environmental load caused by the inability of synthetic plastics to degrade, polylactic acid (PLA) masks, as a biodegradable environmentally friendly plastic, may become a solution. This study simulated the actual degradation process of new PLA masks in different environments by soaking them in various solutions for 4 weeks and explored the influence of the treated PLA fabric fibers on the growth of winter ryegrass. The results show that the weathering degradation of PLA fibers in water mainly occurs through the hydrolysis of ester bonds, and weathering leads to cheese-like and gully-like erosion on the surface of the PLA fiber fabric layer and finally to fiber fracture and the release of microplastics (MPs). The average number of MPs released within 4 weeks is 149.5 items/piece, the particle size is 20-500 µm (44%), and 63.57% of the MPs are transparent fibers. The outer, middle, and inner layers of weathered PLA masks tend to be hydrophilic and have lower mechanical strength. PLA fibers after different treatment methods affect the growth of winter ryegrass. PLA masks are undoubtedly a greener choice than ordinary commercial masks, but in order to confirm this, the entire degradation process, the final products, and the impact on the environment need to be further studied. In the future, masks may be developed to be made from more environmentally friendly biodegradable materials that can have good protecting effects and also solve the problem of end-of-life recycling. A SYNOPSIS: Simulation of the actual degradation process of PLA masks and exploration of the influence of mask degradation on the growth of winter ryegrass.

Insights into adsorption mechanisms of nitro polycyclic aromatic hydrocarbons on common microplastic particles: Experimental studies and modeling

Nitro polycyclic aromatic hydrocarbons (NPAHs) and microplastics (MPs) are emerging contaminants that pose a threat to the aquatic ecosystem. Knowledge of the NPAHs and MPs interaction will help the understanding of their fate and risks in natural environment. Here, the adsorption behavior and mechanism of typical NPAHs on microplastics were investigated. The adsorption kinetic and isotherm data showed that the adsorption of NPAHs was controlled by chemical adsorption and hydrophobic partition, because of excellent fit of kinetic and isothermal equations (R² > 0.9). The adsorption capacity (587-744 μg g^-1) was largely dependent on the hydrophobicity of NPAHs. The experiment of environmental factors confirmed the important role of pollutant hydrophobicity, with 1-Npyr of the highest hydrophobicity having the greatest adsorption on MPs (adsorption rate >90%) and less affected by solution pH and ionic strength (changer <5%). In the mixture system, MPs displayed high adsorption capacity for each compound; Interestingly, because compounds with smaller size were easy to occupy the adsorption sites in the pores of MPs, the adsorption of 2-Nflu (724 μg g^-1) was even greater than that of 9-Nant (713 μg g^-1) and 1-Npyr (703 μg g^-1). The model calculation of adsorption also shows that there is surface adsorption and hydrophobic distribution in the adsorption process. The findings provide new insights into the interactions of MPs with organic pollutants in complex environments.

Microplastics pollution in freshwater fishes in the South of Italy: Characterization, distribution, and correlation with environmental pollutants

In this study, we investigated the presence, abundance, and chemical nature of microplastics (MPs) in the freshwater fish gastrointestinal tract in the South of Italy, and evaluated the possible correlation between MPs and environmental pollutants. Fifty specimens belonging to five species (Scardinius erythrophthalmus, Barbus barbus, Rutilus rubilio, Leuciscus cephalus, Salmo trutta), from twenty sites were collected. MPs chemical feature was identified by means of Attenuated Total Reflection-Fourier Transform Infrared (ATR-FTIR) and Raman microscopy. MPs were represented by 34.86 % fragments, film, and foam (all together MPs) and 65.14 % by fibers (MFs). The mean number of MPs/MFs per fish ranged from 6.25 ± 4.35 in R. rubilio and 2.26 ± 1.94 in B. barbus. The highest number of MPs/MFs per g of GIT was found in R. rubilio (9.07 ± 9.66), and the lowest in S. erythrophthalmus (0.75 ± 0.53). The highest number of MPs/MFs per fish species was found in L. cephalus (16), and the lowest in S. erythrophthalmus (4). Black predominated in every type of plastic debris identified, followed by blue and white, respectively for MFs and MPs. Polyethylene (PE), polyethylene terephthalate (PET), polystyrene (PS), and polypropylene (PP), were the main plastic polymers found. At fish sampling sites, comparing concentrations in soils of potentially toxic elements and persistent organic pollutants with the number of MPs/MFs in fish, a significant correlation was noted with polychlorinated biphenyls (PCBs) and, in particular, with PCB 105, PCB 118, PCB 156, PCB 157, and PCB 167. A strong correlation was also observed with all types of polycyclic aromatic hydrocarbon (PAHs) particularly with benzo(ghi)perylene, dibenz(a,h)anthracene, benzo(b)fluoranthene, benz(a)anthracene, benzo(a)pyrene, and pyrene. The results of this study would be useful to draft management and action plans, promote intervention plans aiming at removing threats to species and habitats, and address ways of renaturalization.

Organic Pollutants Associated with Plastic Debris in Marine Environment: A Systematic Review of Analytical Methods, Occurrence, and Characteristics

Plastic pollution has become one of the most serious environmental problems, and microplastics (MPs, particles < 5 mm size) may behave as a vehicle of organic pollutants, causing detrimental effects to the environment. Studies on MP-sorbed organic pollutants lack methodological standardization, resulting in a low comparability and replicability. In this work, we reviewed 40 field studies of MP-sorbed organic contaminants using PRISMA guidelines for acquiring information on sampling and analytical protocols. The papers were also scored for their reliability on the basis of 7 criteria, from 0 (minimum) to 21 (maximum). Our results showed a great heterogeneity of the methods used for the sample collection, MPs extraction, and instruments for chemicals' identification. Measures for cross-contamination control during MPs analysis were strictly applied only in 13% of the studies, indicating a need for quality control in MPs-related research. The most frequently detected MP-sorbed chemicals were polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), and organochlorine pesticides (OCPs). Most of the studies showed a good reliability (>75% of the total score), with 32 papers scoring 16 or higher. On the basis of the collected information, a standardizable protocol for the detection of MPs and MP-sorbed chemicals has been suggested for improving the reliability of MPs monitoring studies.

Potential risk assessment and toxicological impacts of nano/micro-plastics on human health through food products

The problem of environmental pollution with plastic is becoming more and more acute every year. Due to the low rate of decomposition of plastic, its particles get into food and harm the human body. This chapter focuses on the potential risks and toxicological effects of both nano and microplastics on human health. The main places of distribution of various toxicants along with the food chain have been established. The effects of some examples of the main sources of micro/nanoplastics on the human body are also emphasised. The processes of entry and accumulation of micro/nanoplastics are described, and the mechanism of accumulation that occurs inside the body is briefly explained. Potential toxic effects reported from studies on various organisms are highlighted as well.

Biological effects on the migration and transformation of microplastics in the marine environment

Microplastics(MPs) are ubiquitous, difficult to degrade, and potentially threatening to organisms in marine environment, so it is important to clarify the factors that affect their biogeochemical processes. The impact of biological activities on the MPs in marine environment is ubiquitous and complex, and there is currently a lack of systematic summaries. This paper reviews the effects of biological actions on the migration, distribution and degradation of MPs in marine environment from four aspects: biological ingestion and digestion, biological movement, biological colonization and biological adhesion. MPs in seawater and sediments can be closely combined with organisms through three pathways: biological ingestion, biofilm formation or adhesion to organisms, and are passed between species at different trophic levels through the food chain. The generation and degradation of faecal pellets and biofilms can alter the density of "environmental MPs", thereby affecting their vertical migration and deposition in water bodies. The movement of swimming organisms and the disturbance by benthic organisms can promote the migration of MPs in water and vertical migration and resuspension in sediments, thereby changing the distribution of MPs in local sea areas. The grinding effect of the digestive tract and the secretion of chemicals from the biofilm (such as enzymes and acids) can reduce the particle size and increase surface roughness of MPs, or even degrade them completely. Besides, biological adhesion may be an important mechanism affecting the distribution, migration and preservation of MPs. There may be complex interactions and linkages among marine dynamical processes, photochemical degradation and biological processes that collectively affect the biogeochemical processes of MPs, but their relative contributions remain to be more studied.

Volatile organic compounds identification and specific stable isotopic analysis (δ13C) in microplastics by purge and trap gas chromatography coupled to mass spectrometry and combustion isotope ratio mass spectrometry (PT-GC-MS-C-IRMS)

Microplastics (MPs) have become one of the major global environmental issues in recent decades due to their ubiquity in the environment. Understanding MPs source origin and reactivity is urgently needed to better constrain their fate and budget. Despite improvements in analytical methods to characterize MPs, new tools are needed to help understand their sources and reactivity in a complex environment. In this work, we developed and applied an original Purge-&-Trap system coupled to a GC-MS-C-IRMS to explore the δ¹³C compound-specific stable isotope analysis (CSIA) of volatile organic compounds (VOC) embedded in MPs. The method consists of heating and purging MP samples, with VOCs being cryo-trapped on a Tenax sorbent, followed by GC-MS-C-IRMS analysis. The method was developed using a polystyrene plastic material showing that sample mass and heating temperature increased the sensitivity while not influencing VOC δ¹³C values. This robust, precise, and accurate methodology allows VOC identification and δ¹³C CSIA in plastic materials in the low nanogram concentration range. Results show that the monomer styrene displays a different δ¹³C value (- 22.2 ± 0.2‰), compared to the δ¹³C value of the bulk polymer sample (- 27.8 ± 0.2‰). This difference could be related to the synthesis procedure and/or diffusion processes. The analysis of complementary plastic materials such as polyethylene terephthalate, and polylactic acid displayed unique VOC δ¹³C patterns, with toluene showing specific δ¹³C values for polystyrene (- 25.9 ± 0.1‰), polyethylene terephthalate (- 28.4 ± 0.5‰), and polylactic acid (- 38.7 ± 0.5‰). These results illustrate the potential of VOC δ¹³C CSIA in MP research to fingerprint plastic materials, and to improve our understanding of their source cycle. Further studies in the laboratory are needed to determine the main mechanisms responsible for MPs VOC stable isotopic fractionation.

Spatiotemporal characterisation of microplastics in the coastal regions of Singapore

In the 21st century, plastic production continues to increase at an unprecedented rate, leading to the global issue of plastic pollution. In marine environments, a significant fraction of plastic litter are microplastics, which have a wide range of effects in marine ecosystems. Here, we examine the spatiotemporal distribution of microplastics along the Johor and Singapore Straits, at surface and at depth. Generally, more microplastics were recorded from the surface waters across both Straits. Fragments were the dominant microplastic type (70%), followed by film (25%) and fiber (5%). A total of seven colours of microplastics were identified, with clear microplastics as the most abundant (64.9%), followed by black (25.1%) and blue (5.5%). Microplastics under 500 μm in size accounted for 98.9%, followed by particles 500-1000 μm (1%) and 1-5 mm (0.1%). During the monsoon season, the abundance of microplastics across various sites were observed to be > 1.1 times when compared to the inter-monsoon period. Rainfall was a closely related to the increased microplastic abundance across various sites in the Singapore Strait. This suggests that weather variations during climate change can play critical roles in modulating microplastic availability. Beach sediments facing the Singapore Strait recorded an abundance of 13.1 particles/kg, with polypropylene fragments, polyethylene pellets and thermoplastic polyester foam identified via Fourier transform infrared spectroscopy. Hence, it is crucial to profile the spatiotemporal variation of microplastic abundance in both the surface and in the water column to gain a better understanding of the threat caused by microplastic pollution in the coastal regions of Singapore.

Structural Properties of Graphene Oxide Prepared from Graphite by Three Different Methods and the Effect on Removal of Cr(VI) from Aqueous Solution

Herein, three types of graphene oxides (GOs, GO-M1, GO-M2 and GO-M3) have been successfully prepared from graphite by three different methods and utilized for the removal of Cr(VI) from aqueous solutions. Further, the effects of initial concentration and pH, adsorbent dosage, contact time and temperature on the adsorption performance of GOs were investigated by batch adsorption experiments. Furthermore, the adsorption mechanisms for Cr(VI) adsorption by GOs are mainly the redox reaction and electrostatic attraction, while there are also pore filling, ion exchange and complexation involved in these adsorption processes. The adsorption kinetic and isotherm data indicate that these adsorption processes of GOs on Cr(VI) are dominantly monolayer chemisorption and equilibrium can be reached in 30 min. The saturation adsorption capacities (Qm, 298.15 K) of GO-M1, GO-M2 and GO-M3 for Cr(VI) are estimated to be 3.5412 mg⋅g-1, 2.3631 mg⋅g-1 and 7.0358 mg⋅g-1, respectively. Moreover, the adsorption thermodynamic study showed that these adsorption processes of Cr(VI) by the three types of GOs at 298.15 K to 323.15 K are endothermic, entropy-driven and thermodynamically spontaneous and feasible. Overall, these findings provided vital insights into the mechanism and application of Cr(VI) removal by GOs.

A critical review of microplastic degradation and material flow analysis towards a circular economy

The resilience and low cost of plastics has made their usage ubiquitous, but is also the cause of their prevalence and longevity as waste. Plastic pollution has become a great concern to the health and wellbeing of ecosystems around the world; microplastics are a particular threat, due to their high mobility, ease of ingestion by wildlife, and ability to adsorb and carry toxic contaminants. Material flow analysis has been widely applied to examine stocks and flows of materials in other industries, and has more recently been applied to plastics to examine areas where waste can reach the environment. However, while much research has gone into the environmental fate of microplastics, degradation strategies have been a lesser focus, and material flow analysis of microplastics has suffered from lack of data. Furthermore, the variety of plastics, their additives, and any contaminants pose a significant challenge in degrading (and not merely fragmenting) microplastic particles. This review discusses the current degradation strategies and solutions for dealing with existing and newly-generated microplastic waste along with examining the status of microplastics-based material flow analysis, which are critical for evaluating the possibility of incorporating microplastic waste into a circular economy. The degradation strategies are critically examined, identifying challenges and current trends, as well as important considerations that are frequently under-reported. An emphasis is placed on identifying missing data or information in both material flow analysis and degradation methods that could prove crucial in improving understanding of microplastic flows, as well as optimizing degradation strategies and minimizing any negative environmental impact.

The weathering process of polyethylene microplastics in the paddy soil system: Does the coexistence of pyrochar or hydrochar matter?

This study is based on a particular test site to simulate the weathering process of microplastics (MPs) in paddy soil. A substantial amount of plastic waste, especially MPs, inevitably accumulates in agricultural soil due to the high consumption and short average use of plastics. Recently, MP pollution has become a global environmental concern. However, insight into the soil weathering process of MPs in paddy soil, particularly in the presence of biochar, is lacking. In this study, the physicochemical properties of polyethylene (PE) MPs were determined through a 24-week weathering system conducted in paddy soil, paddy soil with pyrochar, or hydrochar. Moreover, the sorption of original and weathered PE MPs toward three typical pollutants (cadmium/Cd, bisphenol A/BPA, and dimethyl phthalate/DMP) was investigated. The surface of PE MPs was fractured, 1.1-fold rougher, yellow-colored (11.7 units), and 1.8-fold more oxidized after paddy soil weathering. In addition, the crystallinity, negative charge, and stronger hydrophilicity of weathered PE MPs increased compared to original PE MPs. Weathering in a pyrochar or hydrochar system caused fissures, extensive destruction of amorphous areas, and accelerated chemical or bio-oxidation processes for PE MPs, resulting in a more noticeable change in roughness (1.4-2.2-fold), yellow color (12.7-13.7), crystallinity (1.2-1.5-fold), and oxygen content (2.5-3.6-fold). Weathered PE MPs facilitated the sorption with Cd and BPA, attributed to larger specific surface area, abundant polar functional groups, and increased negatively charged sites. However, sorption of DMP to PE MPs was highly influenced by their hydrophobicity, resulting in decreased hydrophobic partition sorption on weathered PE MPs. Overall, paddy soil weathering affected the properties of PE MPs and enhanced sorption of Cd and BPA but reduced sorption of DMP. The coexistence of biochar exacerbated the paddy soil weathering effect. The insight gained from this study assists in better understanding the weathering process of PE MPs in agricultural soils.

Trophic Transfer and Accumulation of Microplastics in Freshwater Ecosystem: Risk to Food Security and Human Health

Plastic pollution is not at all a novel matter to the scientific as well as the public community. However, the knowledge of the general public when it comes to microplastic pollution is still in its infancy. The major sources of these tiny plastic particles in the aquatic environment are laundry, abrasion of household plastics, cosmetics, personal care products, tyre wear, food wrappings, and so on. However, the public is not much aware that they are part of these major emission sources and how much they are contributing to it. Also, the vast majority of research conducted to date on plastic pollution in all size fractions has focused more on marine ecosystems than freshwater ecosystems. Hence, people are more associated with freshwater ecosystems than marine ecosystems; it should be given additional importance.Rather than the effect on aquatic organisms through ingestion and other ways, the ecological risks posed by micro and nanoplastics as vectors for chemical contaminants and their accumulation through trophic transfer are more serious and of utmost importance. Aquatic life or aquatic ecosystem is already affected by a multitude of environmental stressors, and now microplastics and nanoplastics may represent a significant additional risk to food security. Micro and nanoplastics have already invaded our diet in various ways. Even if it does not show any immediate effect on human health, long-term exposure may pose a serious threat to the human population. Hence, identifying the possible sources and reducing exposure to these sources is of utmost importance.

Sorption of selected pharmaceutical compounds on polyethylene microplastics: Roles of pH, aging, and competitive sorption

Microplastics (MPs) as the carrier of pharmaceuticals in aquatic environments have been concerned in recent years. However, the influences of environmental factors on the sorption of pharmaceuticals onto MPs, particularly the effect of the simultaneous sorption by MPs of different pharmaceuticals in multi-solute systems are still unclear. This study investigated the influences of pH, aging of MPs, and competition of pharmaceuticals on the sorptions of sulfamethoxazole (SMX), propranolol (PRP), and sertraline (SER) onto polyethylene MPs. In the 96 h pH-dependent experiments, the sorptions of the three pharmaceuticals were mainly driven by hydrophobic interaction. Besides, the ionization states of the three pharmaceuticals varied with the pH ranging from 2.00 to 12.00, and electrostatic interaction would affect the sorption affinities of the pharmaceuticals in different ionization states. In the aged MPs experiments, the MPs aged by UV irradiation showed a stronger sorption capacity than the pristine ones. Across the MPs under different UV irradiation durations, the 6 d aged MPs showed the highest sorption percentages of 23.0% and 17.6% for SER and PRP, respectively; for SMX, the highest sorption percentage of 5.4% was recorded with the 10 d aged MPs. In the multi-solute systems, the sorption kinetics of the three pharmaceuticals fit well with the pseudo-second-order model. The sorption quantities of the three pharmaceuticals onto MPs followed the order of SER cations (18.70 μg g^-1) > SMX anions (7.83 μg g^-1) > PRP cations (3.80 μg g^-1) at pH 7.00. The good fitting of the Freundlich model suggested a multilayer sorption of the three pharmaceuticals onto MPs. The SER with higher hydrophobicity would preferentially be adsorbed onto MPs and influenced the subsequently sorption processes of the other pharmaceuticals via electrostatic interactions. This may change the environmental fate of the contaminants, which should be carefully considered in future work.

Adsorption of fluoranthene and phenanthrene by virgin and weathered polyethylene microplastics in freshwaters

Concern exists regarding potential health impacts associated with contaminants of emerging concern (CECs) that adsorb to microplastics (MPs). Previous studies have examined MPs as potential contaminant vectors in marine environments as opposed to freshwaters that represent drinking water sources. This study examined adsorption of two polycyclic aromatic hydrocarbons (PAHs), phenanthrene and fluoranthene, by virgin and weathered polyethylene (PE) in both artificial and natural freshwater matrices. Adsorption kinetics and isotherms conducted in artificial freshwater (AFW) consistently showed higher adsorption onto smaller (200 μm) PE when compared to 1090 μm PE. Adsorption mechanisms were primarily associated with hydrophobic interactions and monolayer chemisorption. As well, environmental factors including dissolved organic matter (DOC), pH, and polymer weathering also impacted adsorption. This work provides new insights regarding the adsorption of organic pollutants to better understand the risk of MPs in drinking water sources.

Adsorption characteristics of antibiotics on microplastics: The effect of surface contamination with an anionic surfactant

Microplastics and antibiotics are common, typical pollutants, and they can cause compound pollution where they coexist in the environment. Surfactants in the environment can change the interface characteristics of pollutants, and then drive the change of environmental behavior of pollutants. In this paper, we studied the physicochemical properties of complexes of polystyrene (PS) and polyethylene (PE) contaminated with sodium dodecyl benzene sulfonate (SDBS); the complexes are referred to as SPS and SPE, respectively. Taking oxytetracycline (OTC) and norfloxacin (NOR) as representatives of broad-spectrum antibiotics, the effects of SDBS on the adsorption behavior of PS and PE were analyzed and possible mechanisms were proposed. The results showed that SDBS could effectively combine with PS and PE to enhance the surface electronegativity and reduce the Brunner-Emmett-Teller (BET) specific surface area and porosity. The crystal structure remained basically unchanged, and the surface functional groups changed slightly. SDBS greatly enhanced the saturated adsorption capacities of PS and PE for OTC and NOR, and made adsorption easier, which reduced the Gibbs free energy of the adsorption system. The adsorption behaviors of SPS and SPE for the two antibiotics were consistent with the Elovich kinetic model and Sips isothermal model. SDBS enhanced the hydrophilicity of the microplastics, which facilitated their adsorption of antibiotics dissolved in water. SDBS could directly combine with antibiotics to form a complex, further increasing the adsorption capacity of the microplastics for antibiotics. The -SO₃H in SDBS could combine with oxygen-containing functional groups and -NH₂ in OTC and NOR. Non-ionic covalent bonds, electrostatic interactions, and hydrophobic attraction between the alkyl chain and benzene ring also played a role in adsorption. SDBS made it possible for MPs to load more types and quantities of pollutants and change their preferential adsorption selectivity, which significantly aggravated the environmental hazards.

Toxicological impact of environmental microplastics and benzo[a]pyrene in the seaworm Hediste diversicolor under environmentally relevant exposure conditions

Nowadays, marine ecosystems are under severe threat from the simultaneous presence of multiple stressors, including microplastics (MPs) and polycyclic aromatic hydrocarbons (PAHs) such as benzo[a]pyrene (B[a]P). In addition to their presence in various marine compartments, there are increasing concerns on the potential capacity of MPs to sorb, concentrate and transfer these pollutants in the environment. Although their ecotoxicological impacts are currently evident, few works have studied the combined effects of these contaminants. Therefore, the major purpose of this work was to assess the toxicity of environmental relevant concentrations of MPs (<30 μm) and B[a]P, alone and in mixture, in the seaworm Hediste diversicolor by exploring their accumulation and hazardous biological effects for 3 and 7 days. Environmental MPs were able to increase B[a]P in a time-dependent manner. The obtained results showed that individual treatments, as well as co-exposure to contaminants, caused cytotoxicity and genotoxicity in the cœlomic fluid cells, while oxidative stress effects were observed at tissue and gene levels associated with alteration in neurotransmission. Overall, our findings provide additional clues about MPs as organic pollutant vectors in the marine environment, and contribute to a clearer understanding of their toxicological risk to aquatic invertebrates.

Ecotoxic effects of microplastics and contaminated microplastics - Emerging evidence and perspective

The high prevalence and persistence of microplastics (MPs) in pristine habitats along with their accumulation across environmental compartments globally, has become a matter of grave concern. The resilience conferred to MPs using the material engineering approaches for outperforming other materials has become key to the challenge that they now represent. The characteristics that make MPs hazardous are their micro to nano scale dimensions, surface varied wettability and often hydrophobicity, leading to non-biodegradability. In addition, MPs exhibit a strong tendency to bind to other contaminants along with the ability to sustain extreme chemical conditions thus increasing their residence time in the environment. Adsorption of these co-contaminants leads to modification in toxicity varying from additive, synergistic, and sometimes antagonistic, having consequences on flora, fauna, and ultimately the end of the food chain, human health. The resulting environmental fate and associated risks of MPs, therefore greatly depend upon their complex interactions with the co-contaminants and the nature of the environment in which they reside. Net outcomes of such complex interactions vary with core characteristics of MPs, the properties of co-contaminants and the abiotic factors, and are required to be better understood to minimize the inherent risks. Toxicity assays addressing these concerns should be ecologically relevant, assessing the impacts at different levels of biological organization to develop an environmental perspective. This review analyzed and evaluated 171 studies to present research status on MP toxicity. This analysis supported the identification and development of research gaps and recommended priority areas of research, accounting for disproportionate risks faced by different countries. An ecological perspective is also developed on the environmental toxicity of contaminated MPs in the light of multi-variant stressors and directions are provided to conduct an ecologically relevant risk assessment. The presented analyses will also serve as a foundation for developing environmentally appropriate remediation methods and evaluation frameworks.

Priorities to inform research on marine plastic pollution in Southeast Asia

Southeast Asia is considered to have some of the highest levels of marine plastic pollution in the world. It is therefore vitally important to increase our understanding of the impacts and risks of plastic pollution to marine ecosystems and the essential services they provide to support the development of mitigation measures in the region. An interdisciplinary, international network of experts (Australia, Indonesia, Ireland, Malaysia, the Philippines, Singapore, Thailand, the United Kingdom, and Vietnam) set a research agenda for marine plastic pollution in the region, synthesizing current knowledge and highlighting areas for further research in Southeast Asia. Using an inductive method, 21 research questions emerged under five non-predefined key themes, grouping them according to which: (1) characterise marine plastic pollution in Southeast Asia; (2) explore its movement and fate across the region; (3) describe the biological and chemical modifications marine plastic pollution undergoes; (4) detail its environmental, social, and economic impacts; and, finally, (5) target regional policies and possible solutions. Questions relating to these research priority areas highlight the importance of better understanding the fate of marine plastic pollution, its degradation, and the impacts and risks it can generate across communities and different ecosystem services. Knowledge of these aspects will help support actions which currently suffer from transboundary problems, lack of responsibility, and inaction to tackle the issue from its point source in the region. Being profoundly affected by marine plastic pollution, Southeast Asian countries provide an opportunity to test the effectiveness of innovative and socially inclusive changes in marine plastic governance, as well as both high and low-tech solutions, which can offer insights and actionable models to the rest of the world.

Sorption of pharmaceuticals over microplastics' surfaces: interaction mechanisms and governing factors

Microplastics are one of the emerging and ubiquitous environmental pollutants. Recent studies have proven their co-existence with pharmaceuticals in the environment wherein microplastics act as a potential vector for the transportation of pharmaceuticals. Both microplastics and pharmaceuticals are charged moieties enriched with diverse functional groups resulting in the possibility of multiple interactions. Major interactions could be electrostatic, hydrogen bonding, and hydrophobic, while minor interactions may occur through π-π interaction, cationic bridging mechanism, van der Waals interaction, partition, and pore-filling mechanism. These interactions have both short- and long-term effects over pharmaceutical sorption on microplastics and possibly, ensuing toxicity. This review analyses and summarises the currently reported interactions between microplastic particles and pharmaceuticals as well as establishes the link to various factors affecting the process, viz. pH, salinity, dissolved organic matter, and physiochemical properties of microplastics.

Study of the Potential Accumulation of the Pesticide Alpha-Endosulfan by Microplastics in Water Systems

Microplastics (MP) are spread into all ecosystems and represent a threat to the equilibrium of the environment and human health, not only due to their intrinsic characteristics but also to their action as effective carriers of contaminants, such as pesticides, pharmaceuticals, polychlorinated biphenyls and polycyclic aromatic hydrocarbons. The pesticide α-endosulfan is persistent and spread in the environment. The MP are another possible way of dissemination to be considered in the fate of this pesticide. The adsorption dynamics of α-endosulfan by six different MP (low-density polyethylene—LDPE, polyethylene-co-vinyl acetate, unplasticized polyvinyl chloride, polyamide 6, polystyrene granule, polypropylene granule) with different sizes/shapes and chemical compositions were evaluated. The most critical situation was identified for the system LDPE (particle size < 300 μm). Equilibrium studies (48 h equilibrium time) were performed for distilled, tap and filtered river water. Based on the Langmuir model parameters, the highest maximum adsorption capacity was obtained for distilled water, followed by filtered river and tap waters (i.e., 366 ± 39, 247 ± 38, 157 ± 22 μg/g). The obtained results demonstrate the important role that microplastics may have in the fate and transport of pesticides and their potentially harmful effect on the environment, which requires further investigation.

An enlarging ecological risk: Review on co-occurrence and migration of microplastics and microplastic-carrying organic pollutants in natural and constructed wetlands

Wetlands are a key hub for the accumulation of microplastics (MPs) and have great load capacity to organic pollutants (OPs), thus, have been a hot research topic. It has shown that OPs adsorbed on MPs could be transported to anywhere and MP-associated biofilms also affects the co-occurrence of MPs and OPs. This would induce the desorption of MP-carrying OPs into environment again, increasing latent migration and convergence of MPs and OPs in wetlands. Considering MPs vector effect and MP-associated biofilms, it is necessary to integrate MPs information on its occurrence characteristics and migration behavior for an improved assessment of ecological risk brought by MPs and MP-carrying OPs to whole wetland ecosystems. In this review, we studied papers published from 2010 to 2020, focused on the interaction of MPs with OPs and the role of their co-occurrence and migration on ecological risk to wetlands. Results suggested the interaction between MPs and OPs dominated by adsorption altered their toxicity and environmental behavior, and the corresponding ecological risk induced by their co-occurrence to wetlands is various and complicated. Especially, constructed wetlands as the special hub for the migration of MPs and MP-carrying OPs might facilitate their convergence between natural and constructed wetlands, posing a potential enlarging ecological risk to whole wetlands. Since the study of MPs in wetlands has still been in a primary stage, we hope to provide a new sight to set forth the potential harm of MPs and MP-carrying OPs to wetlands and useful information for follow-up study.