Origin of the Photoluminescence of Metal Nanoclusters: From Metal-Centered Emission to Ligand-Centered Emission

Exploring the potential of eco-friendly carbon dots in monitoring and remediation of environmental pollutants

Photoluminescent carbon dots (CDs) have garnered significant interest owing to their distinctive optical and electronic properties. In contrast to semiconductor quantum dots, which incorporated toxic elements in their composition, CDs have emerged as a promising alternative, rendering them suitable for both environmental and biological applications. CDs exhibit astonishing features, including photoluminescence, charge transfer, quantum confinement effect, and biocompatibility. Recently, CDs derived from green sources have drawn a lot of attention due to their strong photostability, reduced toxicity, better biocompatibility, enhanced fluorescence, and simplicity. These attributes have shown great promise in the areas of LED technology, bioimaging, photocatalysis, drug delivery, biosensing, and antibacterial activity. In contrast, this review offers a comprehensive overview of various green sources utilized to produce CDs and methodologies, along with their merits and demerits, with a notable emphasis on physiochemical properties. Additionally, the paper provides insight into the bibliometric analysis and recent advancements of CDs in sensing, photocatalysis, and antibacterial activity. In this field, extensive research is underway, and a total of 7,438 articles have been identified. Among these, 4242 articles are dedicated to sensing applications, while 1518 and 1678 focus on adsorption and degradation. Carbon dots demonstrate exceptional sensing capabilities within the nanomolar range with a selectivity of up to 95% for pollutants. They exhibit excellent degradation efficiency exceeding 90% within 10-130 min and possess an adsorption capacity from 100 to 800 mg/g. These fascinating qualities render them suitable for diverse applications.

Bright near-infrared emission from the Au39(SR)29 nanocluster

The synthesis of atomically precise gold nanoclusters with high photoluminescence quantum yield (PLQY) in the near-infrared (NIR) region and understanding their photoluminescence mechanism are crucial for both fundamental science and practical applications. Herein, we report a highly luminescent, molecularly pure Au39(PET)29 (PET = 2-phenylethanethiolate) nanocluster with PLQY of 19% in the NIR range (915 nm). Steady state and time-resolved PL analyses, as well as temperature-dependent PL measurements reveal the emission nature of Au39(PET)29, which consists of prompt fluorescence (weak), thermally activated delayed fluorescence (TADF), and phosphorescence (predominant). Furthermore, strong dipole-dipole interaction in the solid-state (e.g., Au39(PET)29 nanoclusters embedded in a polystyrene thin-film) is found to narrow the energy gap between the S1 and T1 states, which results in faster intersystem crossing and reverse intersystem crossing; thus, the ratio of TADF to phosphorescence varies and the total PLQY is increased to 32%. This highly luminescent nanocluster holds promise in imaging, sensing and optoelectronic applications.

Recent Advances of DNA-Templated Metal Nanoclusters for Food Safety Detection: From Synthesis, Applications, Challenges, and Beyond

Food safety concerns have become a significant threat to human health and well-being, catching global attention in recent years. As a result, it is imperative to research conceptually novel biosensing and effective techniques for food matrices detection. Currently, DNA-templated metal nanoclusters (DNA-MNCs) are considered as one of the most promising nanomaterials due to their excellent properties in biosensing. While DNA-MNCs have garnered increasing interest, the reviews of design strategies, applications, and futuristic prospects for biosensing have been hardly found especially in food safety. The synthesis of DNA-MNCs and their use as biosensing materials in food contamination detection, including pathogenic bacteria, toxins, heavy metals, residues of pesticides, and others were comprehensively reviewed. In addition, we summarize the properties of DNA-MNCs briefly and discuss the challenges and future trends. The application of DNA-MNCs powered biosensing has been demonstrated and actively studied, which is a promising paradigm for food safety testing that can supplement or even replace current existing methods. Despite the challenges of difficulty regulating accurately, poor stability, low quantum yield, and difficult commercial transformation, the application prospects of DNA-MNCs biosensors are promising. This review aims to provide insights and directions for the future development of DNA-MNCs based food detection technology.

Tryptophanhydroxamic Acid-Stabilized Ultrasmall Gold Nanoclusters: Tuning the Selectivity for Metal Ion Sensing

Sub-nanometer-sized gold nanoclusters (Au NCs) were prepared via the spontaneous reduction of [AuCl4]-- ions with a hydroxamate derivative of L-tryptophan (Trp) natural amino acid (TrpHA). The prepared TrpHA-Au NCs possess intense blue emission (λem = 470 nm; λex = 380 nm) with a 2.13% absolute quantum yield and 1.47 ns average lifetime. The Trp-stabilized noble metal NCs are excellent metal ion sensors for Fe3+, but in this work, we highlighted that the incorporation of the hydroxamate functional group with an excellent metal ion binding capability can tune the selectivity and sensitivity of these NCs, which is a promising way to design novel strategies for the detection of other metal ions as well. Moreover, their simultaneous identification can also be realized. By decreasing the sensitivity of our nano-sensor for Fe3+ (limit of detection (LOD) ~11 µM), it was clearly demonstrated that the selectivity for Cu2+-ions can be significantly increased (LOD = 3.16 µM) in an acidic (pH = 3-4) condition. The surface-bounded TrpHA molecules can coordinate the Cu2+ confirmed by thermodynamic data, which strongly generates the linking of the NCs via the Cu2+ ions in acidic pH, and a parallel fluorescence quenching occurs. In the case of Fe3+, the degree of quenching strongly depends on the metal ion concentration, and it only occurs when the NCs are not able to bind more Fe3+ (~10 µM) on the surface, causing the NCs' aggregation.

Visible to NIR-II Photoluminescence of Atomically Precise Gold Nanoclusters

Atomically precise gold nanoclusters (NCs) have emerged as a new class of precision materials and attracted wide interest in recent years. One of the unique properties of such nanoclusters pertains to their photoluminescence (PL), for it can widely span visible to near-infrared-I and -II wavelengths (NIR-I/II), and even beyond 1700 nm by manipulating the size, structure, and composition. The current research efforts focus on the structure-PL correlation and the development of strategies for raising the PL quantum yields, which is nontrivial when moving from the visible to the near-infrared wavelengths, especially in the NIR-II regions. This review summarizes the recent progress in the field, including i) the types of PL observed in gold NCs such as fluorescence, phosphorescence, and thermally activated delayed fluorescence, as well as dual emission; ii) some effective strategies that are devised to improve the PL quantum yield (QY) of gold NCs, such as heterometal doping, surface rigidification, and core phonon engineering, with double-digit QYs for the NIR PL on the horizons; and iii) the applications of luminescent gold NCs in bioimaging, photosensitization, and optoelectronics. Finally, the remaining challenges and opportunities for future research are highlighted.

Understanding the Ligand-Dependent Photoluminescent Mechanism in Small Alkynyl-Protected Gold Nanoclusters

Alkynyl-protected gold clusters have recently gained attention because they are more structurally versatile than their thiolate-protected counterparts. Despite their flexibility, however, a higher photoluminescent quantum yield (PLQY) has been observed experimentally compared to that of organically soluble thiolate-protected clusters. Previous experiments have shown that changing the organic ligand, or R group, in these clusters does not affect the geometric or electronic properties of the core, leading to a similar absorption profile. This article serves as a follow-up to those experiments in which the geometric, optical, and photoluminescent (PL) properties of Au22(ETP)18 are pieced together to find the photoluminescence mechanism. These properties are then compared between Au22(C≡CR)18 clusters where the ligand is changed from R = ETP to PA and ET (ETP = 3-ethynylthiophene, PA = phenylacetylene, and ET = 3-ethynyltoluene). As the theoretical results do not reproduce the same absorption profile among the different ligands as in the experiment, this article also presents a supplementary benchmark of the geometric and optical properties among the three ligands for different levels of theory. The calculations show that the photoluminescence mechanism with the ETP ligand results in ligand-to-metal-to-metal charge transfer (LMMCT), while PA and ET are likely a result of core-dominated fluorescence. The changes are the result of the Au(I) ring atoms as well as how the aromatic groups are connected to the cluster. Additionally, dispersion, solvent, and polarization functions are all important to creating an accurate chemical environment, but the most useful tool in these calculations is the use of a long-range-corrected exchange-correlation functional.

Probing the Fluorescence Intermittency of Bimetallic Nanoclusters using Single-Molecule Fluorescence Spectroscopy

Single-molecule spectroscopy (SMS) is a unique and competent technique to study molecule dynamics and sense biomolecules precisely. The design of an ultrahigh-stability single fluorophore probe with excellent photostability and long-lived dark transient states for single-molecule fluorescence microscopy is challenging. Here, we found that the photostability of bimetallic AuAg28 nanoclusters is better than monometallic Ag29 nanoclusters. The photon antibunching experiments unveiled exceptional brightness and remarkable photostability with high survival times of up to 218 s with minimal blinking. AuAg28 NCs exhibited longer "on" times and shorter "off" times as compared to Ag29 NCs. The statistical analysis was performed on at least 100 molecules that showed single-step photobleaching and almost a 5-fold enhancement in intensity on Au doping in Ag29 NCs. The distinctive and tunable photophysics of metal NCs can offer huge potential in pushing single-molecule dynamic measurements to be carried out biologically.

Thermostable protein-stabilized gold nanoclusters as a peroxidase mimic

Protein-stabilized gold nanoclusters (AuNCs) are fascinating nanostructures with exciting properties owing to their ultra-small sizes and functional shell. However, their applications under extreme conditions are still complicated, waiting for programmable solutions. Therefore, the design of a multi-functional protein stabilizer for specific purposes gains attention to improve the stability and functionality of AuNCs. Herein, we exploited the thermostability of genetically engineered KlenTaq DNA polymerase containing five cysteine residues (KTQ5C) to synthesize heat-stable AuNCs (AuNC@KTQ5C) and characterize optical, structural, and hydrodynamic properties. Besides their excellent photophysical properties, AuNC@KTQ5C also exhibit superior peroxidase-like (POD-like) catalytic activity following typical Michaelis-Menten kinetics together with a high affinity towards the POD substrate 2,2'-azino-bis(3-ethylbenzothiazoline-6-sulfonic acid)-diammonium salt (ABTS). Moreover, FTIR and relative catalytic activity analysis of AuNC@KTQ5C reveal that KTQ5C is resistant to changes in protein secondary structure while the AuNCs conserve 70-80% of their catalytic performance after heat treatments up to more than 80 °C. Our findings show that stabilizing AuNCs with thermostable KTQ5C not only preserves the advantages of protein-stabilized AuNCs but can also promote the resistance of AuNCs against aggregation due to protein denaturation under extreme reaction temperatures, protecting their fluorescent emission or catalytic activity.

Towards Green Synthesis of Fluorescent Metal Nanoclusters

In the modern development of nanoscience and nanotechnology, metal nanoclusters have emerged as a foremost category of nanomaterials exhibiting remarkable biocompatibility and photo-stability having dramatically distinctive optical, electronic, and chemical properties. This review focuses on synthesizing fluorescent metal nanoclusters in a greener way to make them suitable for biological imaging and drug delivery application. The green methodology is the desired route for sustainable chemical production and should be utilized for any form of chemical synthesis including nanomaterials. It aims to eliminate harmful waste, uses non-toxic solvents, and employs energy-efficient processes for the synthesis. This article provides an overview of conventional synthesis methods, including stabilizing nanoclusters by small organic molecules in organic solvents. Then we focus on the improvement of properties, applications of green synthesized metal nanoclusters, challenges involved, and further advancement required in the direction of green synthesis of MNCs. There are plenty of problems for scientists to solve to make nanoclusters suitable for bio-applications, chemical sensing, and catalysis synthesized by green methods. Using bio-compatible and electron-rich ligands, understanding ligand-metal interfacial interactions, employing more energy-efficient processes, and utilizing bio-inspired templates for synthesis are some immediate problems worth solving in this field that requires continued efforts and interdisciplinary knowledge and collaboration.

P-Band Intermediate States Mediate Electron Transfer at Confined Nanoscale

In this Perspective, mainly based on the model of structural water molecules (SWs) as bright color emitters, we briefly summarize the development and theoretical elaboration of P-band intermediate state (PBIS) theory as well as its application in several typical catalytic redox reactions. In addition, with a simple equation (2∫ψ2σ1' + ∫ψ2σ2 + ∫ψ2π = 1), we clearly define how the interface states correlate with the three basic parameters of heterogeneous catalysis (conversion, selectivity, and stability), and what is the dynamic nature of catalytic active sites. Overall, the proposal of SW-dominated PBIS theory establishes an internal physical connection between the decay kinetics of excited electrons and the catalytic reaction kinetics and provides new insights into the physical origin of photoluminescence emission of low-dimensional quantum nanodots and the physical nature of nanoconfinement and nanoconfined catalysis.

Polymer-Enabled Assembly of Au Nanoclusters with Luminescence Enhancement and Macroscopic Chirality

The construction of macroscopic chiral luminescent aggregates with well-defined structures not only contributes to the development of functional materials but also has significant implications for analyzing chiral transfer and amplification in biological systems and self-assembly systems. Meanwhile, achieving water-soluble chiral metal nanoclusters (NCs) with high photoluminescence (PL) intensity through a convenient method remains a challenge. Herein, we reported the enhanced luminescence of gold nanoclusters stabilized by D-/L-penicillamine (D-/L-AuNCs) induced by poly(allylamine hydrochloride) (PAH) through supramolecular self-assembly strategies. FT-IR spectra and zeta potential measurements revealed that supramolecular assembly was driven by the synergistic effect of hydrogen bonds and electrostatic interactions, which effectively limited the intramolecular vibration and rotation of the ligand and reduced nonradiative relaxation, thus improving the luminescence properties of nanoclusters. Interestingly, during the slow solvent evaporation process, chiral entanglement of assemblies was enhanced, forming macroscopic wheat-shaped superstructures. This study enriches the understanding of the self-assembly mechanism of nanoclusters and provides a pathway for constructing NC-based chiroptical materials.

Potential impact of various surface ligands on the cellular uptake and biodistribution characteristics of red, green, and blue emitting Cu nanoclusters

Surface functionalization has a prominent influence on tuning/manipulating the physicochemical properties of nanometer scaled materials. Ultrasmall sized nanoclusters with very few atoms have received enormous attention due to their bright fluorescence, biocompatibility, lower toxicity, good colloidal stability and strong photostability. These properties make them suitable for diagnostic applications. In this work, we intend to study the effect of surface functional ligands on their biodistribution both in vitro and in vivo organelle systems for bioimaging applications.

The Role of the Amino Acid Molecular Characteristics on the Formation of Fluorescent Gold- and Silver-Based Nanoclusters

Role of amino acids like L-phenylalanine (Phe), L-glutamine (Gln) and L-arginine (Arg) is described and interpreted in terms of their potential for preparation of fluorescent molecular-like gold and silver nanostructures. We are among the first to demonstrate the effect of syntheses conditions as well as the molecular characteristics of Phe, Gln and Arg amino acids on the structure of the formed products. Comprehensive optical characterizations (lifetime, quantum yield (QY%)) of the blue-emitting products were also carried out. It was confirmed that for all Au-containing samples and for Gln-Ag system the characteristic fluorescence originates from few-atomic metallic nanoclusters (NCs) where the reduction of metal ions was promoted by citrate in some cases. Relatively high QY% (∼18 %) was obtained for Arg-stabilized Au NCs due to the existence of an electrostatic interaction between the electron rich, positively charged guanidium side chain of Arg and the negatively charged carboxylate group of citrate on the metallic surface. Size and structural analysis of the products were evaluated by infrared measurements and dynamic light scattering techniques.

Metal nanoclusters: from fundamental aspects to electronic properties and optical applications

Monolayer-protected noble metal clusters, also called nanoclusters, can be produced with the atomic precision and in large-scale quantity and are playing an increasingly important role in the field of nanoscience. To outline the origin and the perspectives of this new field, we overview the main results obtained on free metal clusters produced in gas phase including mainly electronic properties, the giant atom concept, the optical properties, briefly the role of the metal atom (alkali, divalent, noble metal) and finally the atomic structure of clusters. We also discuss the limitations of the free clusters. Then, we describe the field of monolayer-protected metal clusters, the main results, the new offered perspectives, the added complexity, and the role of the ligand beyond the superatom concept.

Recent Progress on Ligand-Protected Metal Nanoclusters in Photocatalysis

The reckless use of non-replenishable fuels by the growing population for energy and the resultant incessant emissions of hazardous gases and waste products into the atmosphere have insisted that scientists fabricate materials capable of managing these global threats at once. In recent studies, photocatalysis has been employed to focus on utilizing renewable solar energy to initiate chemical processes with the aid of semiconductors and highly selective catalysts. A wide range of nanoparticles has showcased promising photocatalytic properties. Metal nanoclusters (MNCs) with sizes below 2 nm, stabilized by ligands, show discrete energy levels and exhibit unique optoelectronic properties, which are vital to photocatalysis. In this review, we intend to compile information on the synthesis, true nature, and stability of the MNCs decorated with ligands and the varying photocatalytic efficiency of metal NCs concerning changes in the aforementioned domains. The review discusses the photocatalytic activity of atomically precise ligand-protected MNCs and their hybrids in the domain of energy conversion processes such as the photodegradation of dyes, the oxygen evolution reaction (ORR), the hydrogen evolution reaction (HER), and the CO₂ reduction reaction (CO₂RR).

Analytical excited state gradients for time-dependent density functional theory plus tight binding (TDDFT + TB)

Understanding photoluminescent mechanisms has become essential for photocatalytic, biological, and electronic applications. Unfortunately, analyzing excited state potential energy surfaces (PESs) in large systems is computationally expensive, and hence limited with electronic structure methods such as time-dependent density functional theory (TDDFT). Inspired by the sTDDFT and sTDA methods, time-dependent density functional theory plus tight binding (TDDFT + TB) has been shown to reproduce linear response TDDFT results much faster than TDDFT, particularly in large nanoparticles. For photochemical processes, however, methods must go beyond the calculation of excitation energies. Herein, this work outlines an analytical approach to obtain the derivative of the vertical excitation energy in TDDFT + TB for more efficient excited state PES exploration. The gradient derivation is based on the Z vector method, which utilizes an auxiliary Lagrangian to characterize the excitation energy. The gradient is obtained when the derivatives of the Fock matrix, the coupling matrix, and the overlap matrix are all plugged into the auxiliary Lagrangian, and the Lagrange multipliers are solved. This article outlines the derivation of the analytical gradient, discusses the implementation in Amsterdam Modeling Suite, and provides proof of concept by analyzing the emission energy and optimized excited state geometry calculated by TDDFT and TDDFT + TB for small organic molecules and noble metal nanoclusters.

Structural water molecules dominated p band intermediate states as a unified model for the origin on the photoluminescence emission of noble metal nanoclusters: from monolayer protected clusters to cage confined nanoclusters

In the past several decades, noble metal nanoclusters (NMNCs) have been developed as an emerging class of luminescent materials due to their superior photo-stability and biocompatibility, but their luminous quantum yield is relatively low and the physical origin of the bright photoluminescence (PL) of NMNCs remain elusive, which limited their practical application. As the well-defined structure and composition of NMNCs have been determined, in this mini-review, the effect of each component (metal core, ligand shell and interfacial water) on their PL properties and corresponded working mechanism were comprehensively introduced, and a model that structural water molecules dominated p band intermediate state was proposed to give a unified understanding on the PL mechanism of NMNCs and a further perspective to the future developments of NMNCs by revisiting the development of our studies on the PL mechanism of NMNCs in the past decade.

Promising Bioactivity of Vitamin B1-Au Nanocluster: Structure, Enhanced Antioxidant Behavior, and Serum Protein Interaction

In the current work, we first present a simple synthesis method for the preparation of novel Vitamin-B1-stabilized few-atomic gold nanoclusters with few atomic layers. The formed nanostructure contains ca. eight Au atoms and shows intensive blue emissions at 450 nm. The absolute quantum yield is 3%. The average lifetime is in the nanosecond range and three main components are separated and assigned to the metal–metal and ligand–metal charge transfers. Based on the structural characterization, the formed clusters contain Au in zero oxidation state, and Vitamin B1 stabilizes the metal cores via the coordination of pyrimidine-N. The antioxidant property of the Au nanoclusters is more prominent than that of the pure Vitamin B1, which is confirmed by two different colorimetric assays. For the investigation into their potential bioactivity, interactions with bovine serum albumin were carried out and quantified. The determined stoichiometry indicates a self-catalyzed binding, which is almost the same value based on the fluorometric and calorimetric measurements. The calculated thermodynamic parameters verify the spontaneous bond of the clusters along the protein chain by hydrogen bonds and electrostatic interactions.

Ligand effects on the photoluminescence of atomically precise silver nanoclusters

Photoluminescence (PL) is one of the most exciting properties of atomically precise metal nanoclusters (NCs), making them a prime choice for various applications, from sensing to bio-imaging. While there are several advantages of metal NCs for PL-based applications, their PLQY is significantly low compared to other PL-active nanomaterials or organic dyes. It is essential to understand the PL mechanism in detail to tune the PLQY of NCs. There are numerous reports on gold NCs with a known structure where the origin of PL has been explored, and it was found that ligands play a vital role in their PL properties along with the kernel (core). Reports on understanding the ligand effects on PL properties are also evolving for the case of atomically precise silver NCs. This mini-review will summarize the ligands' role in PL of 29 atom Ag NCs, the most reported NCs with diversity in the silver family. The ligands were classified as primary and secondary, and their effects on tuning the PL properties were explained. The review will also address some of the answers to open questions for AgNCs, such as the origin of PL, dynamics, and the tunability of PLQY using ligand modifications.

Aggregation-Induced Emission-Active Nanostructures: Beyond Biomedical Applications

The discovery of aggregation-induced emission (AIE) phenomenon in 2001 has had a significant impact on materials development across different research disciplines. AIE-active materials have been widely exploited for various applications in optoelectronics, sensing, biomedical, and stimuli-responsive systems, etc. This is made possible by integrating AIE features with other fields of science and engineering, such as nanoscience and nanotechnology. AIE has been extensively employed, particularly for biomedical applications, such as biosensing, bioimaging, and theranostics. However, development of AIE-based nanotechnology for other applications is comparatively less, although there have been increasing research activities in recent years. Given the significance and potential of the marriage between AIE hallmark and nanotechnology in AIE-active materials development, this review article summarizes and showcases the latest research efforts in AIE-based nanomaterials, including nanomaterials synthesis and their nonbiomedical applications, such as sensing, optoelectronics, functional coatings, and stimuli-responsive systems. A perspective on the outlook of AIE-based nanostructured materials and relevant nanotechnology for nonbiomedical applications will be provided, giving an insight into how to design AIE-active nanostructures as well as their applications beyond the biomedical domain.

Photoluminescence of the Au38(SR)26 nanocluster comprises three radiative processes

Photoluminescence of ultrasmall, atomically precise gold nanoclusters constitutes an area of significant interest in recent years for both fundamental research and biological applications. However, the exploration of near-infrared photoluminescence of gold nanoclusters is still in its infancy due to the limitations of synthetic methods and characterization techniques. Herein, the photoluminescence properties of an Au₃₈(PET)₂₆ (PET = 2-phenylethanethiolate) nanocluster are investigated in detail. The Au₃₈(PET)₂₆ exhibits an emission peak at 865 nm, which is revealed to be a mix of fluorescence, thermally activated delayed fluorescence, and phosphorescence via the combined analyses of time-resolved and temperature-dependent photoluminescence measurements. The quantum yield of Au₃₈(PET)₂₆ is determined to be 1.8% at room temperature under ambient conditions, which increases to above 90% by suppressing the non-radiative relaxation pathway at a cryogenic temperature (80 K). Overall, the results of this work discover the coexistence of three radiative processes in thiolate-protected Au nanoclusters and will pave the way for understanding the intriguing photoluminescence properties of gold nanoclusters in future studies.

Surface Ligand Influences the Cu Nanoclusters as a Dual Sensing Optical Probe for Localized pH Environment and Fluoride Ion

Functional metal nanomaterials, especially in the nanocluster (NC) size regime, with strong fluorescence, aqueous colloidal stability, and low toxicity, necessitate their application potential in biology and environmental science. Here, we successfully report a simple cost-effective method for red-/green-color-emitting protein/amino-acid-mediated Cu NCs in an aqueous medium. As-synthesized Cu NCs were characterized through UV-Vis absorption spectroscopy, fluorescence spectroscopy, time-resolved photoluminescence, dynamic light scattering, zeta potential, transmission electron microscopy and X-ray photoelectron spectroscopy. The optical properties of both Cu NCs responded linearly to the variation in pH in the neutral and alkaline ranges, and a robust pH reversible nature (between pH 7 and 11) was observed that could be extended to rapid, localized pH sensor development. However, a contrasting pH response nature between protein-Cu NCs and amino acid-Cu NCs was recorded. The alteration in protein secondary structure and strong binding nature of the surfactants were suggested to explain this behavior. Furthermore, we investigated their use as an efficient optical probe for fluoride ion detection. The limit of detection for protein-Cu NCs is 6.74 µM, whereas the limit of detection for amino acid-Cu NCs is 4.67 µM. Thus, it is anticipated that ultrasmall Cu NCs will exhibit promise in biological and environmental sensing applications.

Polygonal gold nanocrystal induced efficient phase transition in 2D-MoS2for enhancing photo-electrocatalytic hydrogen generation

Plasmonic nanocrystals (NCs) assisted phase transition of two-dimensional molybdenum disulfide (2D-MoS₂) unlashes numerous opportunities in the fields of energy harvesting via electrocatalysis and photoelectrocatalysis by enhancing electronic conductivity, increasing catalytic active sites, lowering Gibbs free energy for hydrogen adsorption and desorption, etc. Here, we report the synthesis of faceted gold pentagonal bi-pyramidal (Au-PBP) nanocrystals (NC) for efficient plasmon-induced phase transition (from 2 H to 1 T phase) in chemical vapor deposited 2D-MoS₂. The as-developed Au-PBP NC with the increased number of corners and edges showed an enhanced multi-modal plasmonic effect under light irradiations. The overpotential of hydrogen evolution reaction (HER) was reduced by 61 mV, whereas the Tafel slope decreased by 23.7 mV/dec on photoexcitation of the Au-PBP@MoS₂hybrid catalyst. The enhanced performance can be attributed to the light-induced 2H to 1 T phase transition of 2D-MoS₂, increased active sites, reduced Gibbs free energy, efficient charge separation, change in surface potential, and improved electrical conductivity of 2D-MoS₂film. From density functional theory (DFT) calculations, we obtain a significant change in the electronic properties of 2D-MoS₂(i.e. work function, surface chemical potential, and the density of states), which was primarily due to the plasmonic interactions and exchange-interactions between the Au-PBP nanocrystals and monolayer 2D-MoS₂, thereby enhancing the phase transition and improving the surface properties. This work would lay out finding assorted routes to explore more complex nanocrystals-based multipolar plasmonic NC to escalate the HER activity of 2D-MoS₂and other 2D transition metal dichalcogenides.

Luminescent and sustainable d10 coinage metal thiolate coordination polymers for high-temperature optical sensing

The d¹⁰ coinage metal coordination polymers (CPs) are known to display photophysical properties which can be tuned depending on the functionality of the ligand. Three new CPs made of d¹⁰ coinage metals and methyl thiosalicylate, [M(o-SPhCO₂Me)]_n (M = Cu, Ag, Au), are reported. They are all constructed from one-dimensional metal-sulfur networks, in which Cu and Ag are three-coordinated to sulfur atoms, whereas Au is only two-coordinated. It results that both Cu(I) and Ag(I) CPs show orange photoemission at room temperature, and the Au(I) one exhibits near-infrared emission at low temperatures. The intense orange-emissive Ag(I) CP and the blue-emissive coumarin 120 have been mixed in an organic matrix, the polyvinylidene fluoride (PVDF), to form a dual luminescent flexible composite film. This film, evaluated for thermometry, shows great sensitivity for temperatures up to 100°C, a temperature never reached with non-lanthanide-based CPs.

White light-emitting, biocompatible, water-soluble metallic magnesium nanoclusters for bioimaging applications

Ultra-small (1.6 nm), water-soluble, white light-emitting (WLE), highly stable (∼8 months) BSA templated metallic (Mg⁰) nanoclusters (fluorescent magnesium nanoclusters = FMNCs) is developed using the green and facile route. Synthesis was facilitated by the reduction of magnesium salt, where template bovine serum albumin is utilized as a reducing agent and ascorbic acid act as a capping agent to impart stability in water, thereby obtaining stabilized Mg⁰nanoclusters In solution, stabilized Mg⁰nanoclusters produce white light (450-620 nm with FWHM ∼120 nm) upon 366 nm light excitation. This white light emission was found to have a CIE coordinate of 0.30, 0.33 [pure white light CIE (0.33, 0.33)]. Taking advantage of WLE and ultrasmall size, FMNCs were used forin vitrofluorescence imaging of HaCaT cell lines, yielding blue (τ= 2.94 ns, with a relative of QY = 1.2 % w.r.t QS), green (τ= 3.07 ns; relative quantum yield of 4.6% w.r.t R6G) and red (τ= 0.3 ns) images. Further, incubation of FMNCs with HEK293 (Human embryonic kidney cell) and cancerous MDA-MB-231 (Breast cancer cell line) human cell lines yielded 100 % cell viability. Current work is envisioned to contribute significantly in the area of science, engineering, and nanomedicine.

Stabilization of {Ag20(StBu)10} and {Ag19(StBu)10} Toroidal Complexes in DMSO: HPLC-ICP-AES, PL, and Structural Studies

The presence of DMSO provides a unique ability to stabilize silver toroidal complexes in the direct reaction between AgStBu and AgNO3 at 80 °C. Slow cooling results in large crystals of [NO3@Ag19.2(StBu)10(DMSO)5.2(NO3)8.2]·3DMSO (1), which were isolated and characterized by single crystal X-ray diffraction (SCXRD) analysis. The crystal structure contains both {Ag20(StBu)10} and {Ag19(StBu)10} clusters. The solution of these material in DMSO was studied with HPLC techniques, which demonstrated the presence of both complexes in solution. The use of [SiW12O40]4– as counter anion gives crystals of a double complex salt [Ag17.8(NO3)3.8(StBu)10][SiW12O40]·30DMSO (2) under the same conditions. Temperature-dependent photoluminescence (PL) was studied.

Engineering Coinage Metal Nanoclusters for Electroluminescent Light-Emitting Diodes

Coinage metal nanoclusters (MNCs) are a new type of ultra-small nanoparticles on the sub-nanometer (typically < three nm) scale intermediate between atoms and plasmonic nanoparticles. At the same time, the ultra-small size and discrete energy levels of MNCs enable them to exhibit molecular-like energy gaps, and the total structure involving the metal core and surface ligand together leads to their unique properties. As a novel environmentally friendly chromophore, MNCs are promising candidates for the construction of electroluminescent light-emitting diodes (LEDs). However, a systematic summary is urgently needed to correlate the properties of MNCs with their influences on electroluminescent LED applications, describe the synthetic strategies of highly luminescent MNCs for LEDs’ construction, and discuss the general influencing factors of MNC-based electroluminescent LEDs. In this review, we first discuss relevant photoemissions of MNCs that may have major influences on the performance of MNC-based electroluminescent LEDs, and then demonstrate the main synthetic strategies of highly luminescent MNCs. To this end, we illustrate the recent development of electroluminescent LEDs based on MNCs and present our perspectives on the opportunities and challenges, which may shed light on the design of MNC-based electroluminescent LEDs in the near future.

Photoluminescent Histidine-Stabilized Gold Nanoclusters as Efficient Sensors for Fast and Easy Visual Detection of Fe Ions in Water Using Paper-Based Portable Platform

Herein is presented a novel and efficient portable paper-based sensing platform using paper-incorporated histidine stabilized gold nanoclusters (His-AuNCs), for the sensitive and selective detection of Fe ions from low-volume real water samples based on photoluminescence (PL) quenching. Highly photoluminescent colloidal His-AuNCs are obtained via a novel microwave-assisted method. The His-AuNCs-based sensor reveals a limit of detection (LOD) as low as 0.2 μM and a good selectivity towards Fe ions, in solution. Further, the fabricated portable sensing device based on paper impregnated with His-AuNCs proves to be suitable for the easy detection of hazardous Fe levels from real water samples, under UV light exposure, through evaluating the level of PL quenching on paper. Photographic images are thereafter captured with a smartphone camera and the average blue intensity ratio (I/I₀) of the His-AuNCs-paper spots is plotted against [Fe²⁺] revealing a LOD of 3.2 μM. Moreover, selectivity and competitivity assays performed on paper-based sensor prove that the proposed platform presents high selectivity and accuracy for the detection of Fe ions from water samples. To validate the platform, sensing assays are performed on real water samples from local sources, spiked with 35 μM Fe ions (i.e., Fe²⁺). The obtained recoveries prove the high sensitivity and accuracy of the proposed His-AuNCs-paper-based sensor pointing towards its applicability as an easy-to-use, fast, quantitative and qualitative sensor suitable for on-site detection of toxic levels of Fe ions in low-volume real water samples.

Fluorescence Quenching of Tyrosine-Ag Nanoclusters by Metal Ions: Analytical and Physicochemical Assessment

A new synthesis method is described for the first time to produce silver nanoclusters (AgNCs) by using the tyrosine (Tyr) amino acid. Several important parameters (e.g., molar ratios, initial pH, reaction time etc.) were optimized to reach the highest yield. The formed Tyr-AgNCs show characteristic blue emission at λem = 410 nm, and two dominant fluorescence lifetime components were deconvoluted (τ1 ~ 3.7 and τ2 ~ 4.9 ns). The NCs contained metallic cores stabilized by dityrosine. For possible application, the interactions with several metal ions from the tap water and wastewater were investigated. Among the studied cations, four different ions (Cu2+, Ni2+, Fe3+, and Rh3+) had a dominant effect on the fluorescence of NCs. Based on the detected quenching processes, the limit of detection of the metal ions was determined. Static quenching (formation of a non-luminescent complex) was observed in all cases by temperature-dependent measurements. The calculated thermodynamic parameters showed that the interactions are spontaneous ranked in the following order of strength: Cu2+ > Fe3+ > Rh3+ > Ni2+. Based on the sign and relations of the standard enthalpy (ΔH°) and entropy changes (ΔS°), the dominant forces were also identified.

High Fructose Concentration Increases the Fluorescence Stability of DNA-Templated Copper Nanoclusters by Several Thousand Times

DNA-templated copper nanoclusters (CuNCs) have limited applications because of their low fluorescence stability (several tens of minutes). In this study, we prepared CuNCs with improved temporal fluorescence stability by introducing fructose into the CuNC synthesis process and optimizing the reaction conditions. The inclusion of fructose increased the operating lifetime of CuNCs by approximately 5200-fold from 30 min to 108 days and improved their stability against heat, acids, and bases compared to CuNCs synthesized under original conditions. In addition, the fluorescence signal of CuNCs was maintained for a significantly longer time when stored at refrigeration (4 °C) and freezing (-20 °C) temperatures. Importantly, this method did not require the addition of substances other than fructose or any additional physicochemical treatment to maintain the fluorescence of DNA-templated CuNCs for more than several tens of days. As such, this study could serve as a basis to improve the stability of CuNCs for various applications.

Ultra-bright and narrow-band emission from Ag atomic sized nanoclusters in a self-assembled plasmonic resonator

We have proposed, implemented and investigated a novel, efficient quantum emitter based on an atomic-sized Ag nanocluster in a plasmonic resonator. The quantum emitter enables the realization of: (1) ultra-bright fluorescence, (2) narrow-band emission down to 4 nm, (3) ultra-short fluorescence lifetime. The fluorescence cross-section of a quantum emitter is on the order of σ ∼ 10^-14 cm², which is comparable to the largest fluorescence cross-sections of dye molecules and quantum dots, and enables a light source with a record high intensity known only for plasmon nanolasers. The results presented suggest a unique method for fabricating nanoprobes with high brightness and wavelength-tunable spectrally narrow fluorescence, which is needed for multiplex diagnostics and detection of substances at extremely low concentrations.

Gold nanomaterials and their potential use as cryo-electron tomography labels

Rapid advances in cryo-electron tomography (cryo-ET) are driving a revolution in cellular structural biology. However, unambiguous identification of specific biomolecules within cellular tomograms remains challenging. Overcoming this obstacle and reliably identifying targets in the crowded cellular environment is of major importance for the understanding of cellular function and is a pre-requisite for high-resolution structural analysis. The use of highly-specific, readily visualised and adjustable labels would help mitigate this issue, improving both data quality and sample throughput. While progress has been made in cryo-CLEM and in the development of cloneable high-density tags, technical issues persist and a robust 'cryo-GFP' remains elusive. Readily-synthesized gold nanomaterials conjugated to small 'affinity modules' may represent a solution. The synthesis of materials including gold nanoclusters (AuNCs) and gold nanoparticles (AuNPs) is increasingly well understood and is now within the capabilities of non-specialist laboratories. The remarkable chemical and photophysical properties of <3nm diameter nanomaterials and their emergence as tools with widespread biomedical application presents significant opportunities to the cryo-microscopy community. In this review, we will outline developments in the synthesis, functionalisation and labelling uses of both AuNPs and AuNCs in cryo-ET, while discussing their potential as multi-modal probes for cryo-CLEM.

[Cu18H3(S-Adm)12(PPh3)4Cl2]: fusion of Platonic and Johnson solids through a Cu(0) center and its photophysical properties

Structural elucidation of atom-precise thiolate-protected copper nanoclusters (Cu NCs) containing Cu(0) is quite challenging. Here, we report a new adamantane-thiol-protected NC, [Cu₁₈H₃(S-Adm)₁₂(PPh₃)₄Cl₂] (Cu₁₈), which represents the first observation of a rare mononuclear Cu(0)-containing Cu₁₀H₃Cl₂ core that is constructed via kernel fusion through vertex sharing of the Platonic-solid- and Johnson-solid-geometry-like kernels and hydride-bridging. The unique core is surrounded by a Cu₈S₁₂P₄ metal–ligand motif shell and adopts a butterfly-like structure. In comparison to its closest structural analogue, the predominant effect of the principal Cu atom vacancy-induced structural rearrangement is evidenced. The occupied orbitals of this NC have a major d-orbital contribution to the distorted Cu₆ octahedral kernel, whereas unoccupied orbitals owe a contribution to the distorted Cu₅ square-pyramidal kernel. Thus, the charge transfer phenomenon is uniquely instigated between the two fused kernels through Cu(d) → Cu(d) transition via the Cu(0) center. This NC exhibits violet emission due to kernel-dominated relaxation at room temperature, which is further enhanced by confining the surface protecting ligands through recognition-site-specific host–guest supramolecular adduct formation by β-cyclodextrin. The unique electronic structure of this NC further facilitates its application toward photocurrent generation. Thus, this study offers a unique strategy for the controllable synthesis of a Cu(0)-containing Cu NC, which enables atomic-level insights into their optoelectronic properties.

An example of a butterfly-like [Cu₁₈H₃(S-Adm)₁₂(PPh₃)₄Cl₂] cluster with vertex-sharing kernels through a Cu(0) center. Combined experimental and theoretical results correlate its photophysical properties with its unique structural architecture.

Dual-emission ratiometric fluorescence probe based on copper nanoclusters for the detection of rutin and picric acid

In this paper, polyvinylpyrrolidone-templated copper nanoclusters (PVP-CuNCs) were synthesised using a hydrothermal method. Through the electrostatic interaction between PVP-CuNCs and rhodamine 6G, a dual-emission ratiometric fluorescent probe was constructed, and two well-separated emission peaks appeared at 420 nm and 570 nm. The selective detection of rutin and picric acid was achieved by fitting the relationship between the ratiometric fluorescence intensity (F₄₂₀/F₅₇₀) and the concentration of the target detection substance. The limits of detection of rutin and picric acid were 0.84 μM and 0.27 μM, respectively. The synthesised material has high stability and successfully allows the determination of rutin content in drugs and picric acid content in water samples with satisfactory recoveries.

Dynamic Pt-OH-·H2O-Ag species mediate coupled electron and proton transfer for catalytic hydride reduction of 4-nitrophenol at the confined nanoscale interface

Generally, the catalytic transformation of 4-nitrophenol (4-NP) to 4-aminophenol (4-AP) at heterogeneous metal surfaces follows a Langmuir-Hinshelwood (L-H) mechanism when sodium borohydride (NaBH₄) is used as the sacrificial reductant. Herein, with Pt-Ag bimetallic nanoparticles confined in dendritic mesoporous silica nanospheres (DMSNs) as a model catalyst, we demonstrated that the conversion of 4-NP did not pass through the direct hydrogen transfer route with the hydride equivalents being supplied by borohydride via the bimolecular L-H mechanism, since Fourier transform infrared (FTIR) spectroscopy with the use of isotopically labeled reactants (NaBD₄ and D₂O) showed that the final product of 4-AP was composed of protons (or deuterons) that originated from the solvent water (or heavy water). Combined characterization by X-ray photoelectron spectroscopy (XPS), ¹H nuclear magnetic resonance (NMR) and the optical excitation and photoluminescence spectrum evidenced that the surface hydrous hydroxide complex bound to the metal surface (also called structural water molecules, SWs), due to the space overlap of p orbitals of two O atoms in SWs, could form an ensemble of dynamic interface transient states, which provided the alternative electron and proton transfer channels for selective transformation of 4-NP. The cationic Pt species in the Ag-Pt bimetallic catalyst mainly acts as a dynamic adsorption center to temporally anchor SWs and related reactants, and not as the active site for hydrogen activation.

The Precise Detection of HER-2 Expression in Breast Cancer Cell via Au25 Probes

Triple-negative breast cancer (TNBC) accounts for nearly one-quarter of all breast cancer cases, but effective targeted therapies for this disease remain elusive because TNBC cells lack the expression of the most common three receptors seen in other subtypes of breast cancers. The medium-term diagnosis of breast cancers is essential for development and prognosis. According to reports, patients with TNBC may be converted to a positive epidermal growth factor receptor 2(HER-2) after chemotherapy, and trastuzumab treatment will have a better prognosis. Therefore, it is important to accurately quantify the expression of HER-2 in breast cancer cells. Herein, we design a red fluorescent Au25 probe synthesized with BSA-biotin as the ligand, which is accurately quantified by HER-2 primary antibody-biotin using the avidin system. The quantitative detection of the expression of HER-2 in breast cancers is helpful for the companion diagnostic of breast cancer treatment and provides follow-up treatment.

Self-Assembled Metal Nanoclusters: Driving Forces and Structural Correlation with Optical Properties

Studies on self-assembly of metal nanoclusters (MNCs) are an emerging field of research owing to their significant optical properties and potential applications in many areas. Fabricating the desired self-assembly structure for specific implementation has always been challenging in nanotechnology. The building blocks organize themselves into a hierarchical structure with a high order of directional control in the self-assembly process. An overview of the recent achievements in the self-assembly chemistry of MNCs is summarized in this review article. Here, we investigate the underlying mechanism for the self-assembly structures, and analysis reveals that van der Waals forces, electrostatic interaction, metallophilic interaction, and amphiphilicity are the crucial parameters. In addition, we discuss the principles of template-mediated interaction and the effect of external stimuli on assembly formation in detail. We also focus on the structural correlation of the assemblies with their photophysical properties. A deep perception of the self-assembly mechanism and the degree of interactions on the excited state dynamics is provided for the future synthesis of customizable MNCs with promising applications.

Photoluminescent nanocluster-based probes for bioimaging applications

In the continuous search for versatile and better performing probes for optical bioimaging and biosensing applications, many research efforts have focused on the design and optimization of photoluminescent metal nanoclusters. They consist of a metal core composed by a small number of atoms (diameter < 2-3 nm), usually coated by a shell of stabilizing ligands of different nature, and are characterized by molecule-like quantization of electronic states, resulting in discrete and tunable optical transitions in the UV-Vis and NIR spectral regions. Recent advances in their size-selective synthesis and tailored surface functionalization have allowed the effective combination of nanoclusters and biologically relevant molecules into hybrid platforms, that hold a large potential for bioimaging purposes, as well as for the detection and tracking of specific markers of biological processes or diseases. Here, we will present an overview of the latest combined imaging or sensing nanocluster-based systems reported in the literature, classified according to the different families of coating ligands (namely, peptides, proteins, nucleic acids, and biocompatible polymers), highlighting for each of them the possible applications in the biomedical field.

Silver Cluster Interactions with Tyrosine: Towards Amino Acid Detection

Tyrosine (Tyr) is involved in the synthesis of neurotransmitters, catecholamines, thyroid hormones, etc. Multiple pathologies are associated with impaired Tyr metabolism. Silver nanoclusters (Ag NCs) can be applied for colorimetric, fluorescent, and surface-enhanced Raman spectroscopy (SERS) detection of Tyr. However, one should understand the theoretical basics of interactions between Tyr and Ag NCs. Thereby, we calculated the binding energy (Eb) between Tyr and Agnq (n = 1-8; q = 0-2) NCs using the density functional theory (DFT) to find the most stable complexes. Since Ag NCs are synthesized on Tyr in an aqueous solution at pH 12.5, we studied Tyr-1, semiquinone (SemiQ-1), and Tyr-2. Ag32+ and Ag5+ had the highest Eb. The absorption spectrum of Tyr-2 significantly red-shifts with the attachment of Ag32+, which is prospective for colorimetric Tyr detection. Ag32+ interacts with all functional groups of SemiQ-1 (phenolate, amino group, and carboxylate), which makes detection of Tyr possible due to band emergence at 1324 cm-1 in the vibrational spectrum. The ground state charge transfer between Ag and carboxylate determines the band emergence at 1661 cm-1 in the Raman spectrum of the SemiQ-1-Ag32+ complex. Thus, the prospects of Tyr detection using silver nanoclusters were demonstrated.

A simple strategy to enhance the luminescence of metal nanoclusters and its application for turn-on detection of 2-thiouracil and hyaluronidase

Metal nanoclusters (NCs) as promising nanomaterials for sensing applications have attracted significant attention because of their unique photoluminescence properties. However, the quantum yields of metal NCs are still relatively low when compared to conventional quantum dots and organic dyes, posing a major obstacle to their assay application. It is challenging but important to pursue a way to improve the luminescence of metal NCs. In this work, we developed a novel strategy to enhance the luminescence of silver nanoclusters (Ag NCs) based on the binding with 6-aza-2-thiothymine (ATT) via Au³⁺ bridging. We studied the possible mechanism of this binding-induced luminescence enhancement and attributed it to the ligands rigidifying. Since 2-thiouracil (2-TU), a common anticancer, antithyroid, and antiviral agent, featured a similar molecular structure of ATT, this luminescence enhancement strategy can be designed to sensitive and selective turn-on detect 2-TU. As far as we know, this is the first report for the fluorescent turn-on detect 2-TU. Benefiting from the good performance of this method and the advantages of fluorescence assay, intracellular imaging of 2-TU, which has yet to be achieved based on currently developed analytical methods for 2-TU, was carried out via our approach. Moreover, to further expand the sensing application of the developed luminescence enhancement method, we constructed a universal detection platform. Taking hyaluronidase as a target, the feasibility of the detection platform was confirmed. The discoveries in this study offer a simple route to improve the optical properties of NCs and design their sensing applications.

Highly Stable Copper Nano Cluster on Nitrogen-Doped Graphene Quantum Dots for the Simultaneous Electrochemical Sensing of Dopamine, Serotonin, and Nicotine; a Possible Addiction Scrutinizing Strategy

A highly stable copper nanocluster CuNC@N-GQD which exhibited stability for more than one year was synthesized using nitrogen doped graphene quantum dots (N-GQDs) as reducing and capping agents and smaller...