Toxicity of Zero- and One-Dimensional Carbon Nanomaterials

Preparation of edible antibacterial films based on corn starch /carbon nanodots for bioactive food packaging

Packaging plays an important role in protecting food from environmental impacts. However, traditional petroleum-based packaging has difficulty in meeting the antimicrobial and antioxidant requirements of prepared foods. This study introduced carbon dots (CDs), prepared by using carrot as a precursor, into corn starch (CS) to construct a bio-friendly composite film with high freshness retention properties. The scavenging of DPPH radicals reached 92.77 % at a CDs concentration of 512 µg/mL, and the antimicrobial activity of CS/5% CDs against Escherichia coli and Staphylococcus aureus was increased to 99.9 %. Notably, the homogeneous doping of CDs creates a dense surface and high carbon content inside the film, which promotes the elasticity and thermal stability of the composite film. Finally, we encapsulated deep-fried meatballs in CS-CDs films. The results showed that the CS-CDs films effectively protected the quality of deep-fried meatballs, and have excellent potential for application in food preservation.

Emerging concern of nano-pollution in agro-ecosystem: Flip side of nanotechnology

Nanomaterials (NMs) have proven to be a game-changer in agriculture, showcasing their potential to boost plant growth and safeguarding crops. The agricultural sector has widely adopted NMs, benefiting from their small size, high surface area, and optical properties to augment crop productivity and provide protection against various stressors. This is attributed to their unique characteristics, contributing to their widespread use in agriculture. Human exposure from various components of agro-environmental sectors (soil, crops) NMs residues are likely to upsurge with exposure paths may stimulates bioaccumulation in food chain. With the aim to achieve sustainability, nanotechnology (NTs) do exhibit its potentials in various domains of agriculture also have its flip side too. In this review article we have opted a fusion approach using bibliometric based analysis of global research trend followed by a holistic assessment of pros and cons i.e. toxicological aspect too. Moreover, we have also tried to analyse the current scenario of policy associated with the application of NMs in agro-environment.

Effect of conjugation length on fluorescence characteristics of carbon dots

The influence of sp2- and sp3-hybridized carbon coexisting in carbon cores on fluorescence characteristics of carbon dots (CDs) was revealed by density functional theory calculations. Based on the constructed coronene-like structures, the fluorescence emission spectra, transition molecular orbital pairs and several physical quantities describing the distribution of electrons and holes were investigated. The results indicate that due to the interaction between sp2 and sp3 carbon atoms, two main factors including the hyperconjugative effect and the separation of sp2 domain by sp3 carbon atoms can regulate the fluorescence wavelength. By analyzing the transition molecular orbital pairs, it was found that the fluorescence wavelength has a close correlation with the conjugation length, suggesting that the conjugation length can predict the shift of the emission spectra of CDs. The theoretical results provide a comprehensive understanding of fluorescence mechanism and help to synthesize CDs with expected fluorescence wavelength.

Antioxidant potential of nanomaterials

Background/aim

The novel field of nanomaterials allows infinite possibilities in order to create antioxidant therapies. The present review is aimed to describe the state of art concerning on nanomaterials and their effects on reactive oxygen species (ROS) production. A wide range of nanoparticles has been designed for this purpose, and each one possesses some particular characteristics which allow these significant antioxidant results. Several in vivo and in vitro works state the ability of these nanoparticles to mimic the redox systems of the cells, and thus, the potential role of nanoparticles as antioxidant treatment for several diseases.

Materials and methods

This paper was written after a review of the articles published on the field, using the "PubMed" and "Research Gate" databases.

Results

The main types of nanoparticles are listed and explained below, offering a global vision of the field with great interest for research. Antitumor chemo- and radiotherapies have been found to improve efficacy by enhancing the selectivity of cytocidal effects and minimizing systemic adverse effects when such materials are used. Furthermore, catalytic nanomaterials can execute energy-free antioxidant cycles that scavenge the most harmful reactive oxygen species via SOD- and catalase-like activities.

Conclusion

This unique method is projected to result in significant gains in the long run. However, due to a lack of understanding of potential adverse body reactions to these novel strategies, caution must be exercised. Analyzing the biocompatibility of these nanomaterials carefully, particularly in terms of biokinetics and the problems that could arise from long-term retention of nonbiodegradable inorganic nanomaterials, is required.

Toxicity and Biotransformation of Carbon-Based Nanomaterials in Marine Microalgae Heterosigma akashiwo

This work is related to the environmental toxicology risk assessment and evaluation of the possible transformation of carbon-based nanomaterials (CNMs) after contact with marine microalgae. The materials used in the study represent common and widely applied multi-walled carbon nanotubes (CNTs), fullerene (C₆₀), graphene (Gr), and graphene oxide (GrO). The toxicity was evaluated as growth rate inhibition, esterase activity, membrane potential, and reactive oxygen species generation changes. The measurement was performed with flow cytometry after 3, 24, 96 h, and 7 days. The biotransformation of nanomaterials was evaluated after 7 days of microalgae cultivation with CNMs by FTIR and Raman spectroscopy. The calculated toxic level (EC₅₀ in mg/L, 96 h) of used CNMs reduced in the following order: CNTs (18.98) > GrO (76.77) > Gr (159.40) > C₆₀ (414.0). Oxidative stress and membrane depolarization were the main toxic action of CNTs and GrO. At the same time, Gr and C₆₀ decreased the toxic action with time and had no negative impact on microalgae after 7 days of exposure even at the concentration of 125 mg/L. Moreover, C₆₀ and Gr after 7 days of contact with microalgae cells obtained structural deformations.

Mussel-inspired magnetic adsorbent MnO2/PDA@Fe3O4 for removing heavy metal ions contaminants in single and mixed systems

Heavy metal pollution has been a magnificent concern for a long period. A novel magnetic material, MnO₂/PDA@Fe₃O₄, was prepared in this paper. With the assistance of multiple characterization methods, it was confirmed that polydopamine coated the magnetic nucleus and acted as a dense intermediate layer for MnO₂ attachment. Having superior adsorption performance, MnO₂/PDA@Fe₃O₄ could remove heavy metal cations efficiently no matter in single or mixed systems. The maximum adsorption capacities calculated by the Langmuir model for Pb(II), Cu(II), and Cd(II) were 295.01 mg/g, 130.30 mg/g, and 115.16 mg/g, respectively. In mixed systems, the adsorbent showed obvious selectivity for Pb(II). And the variation of Cu(II) concentration was more responsible for Pb(II) adsorption than that of Cd(II). The kinetic and thermodynamic data revealed that the polluted ions immobilizations by MnO₂/PDA@Fe₃O₄ were chemisorption and were endothermic, entropy increase, spontaneous process. The presence of humic acid and coexisting ions induced only a very limited interference. In addition, MnO₂/PDA@Fe₃O₄ maintained excellent adsorption performance and stability after five cycles of adsorption and removed 98.33% Pb(II) and 71.24% Cu(II) from actual water, respectively. This study confirmed that the MnO₂/PDA@Fe₃O₄ had great potential and broad prospects to remediate the heavy metal contaminants in water.

Genistein carbon dots exhibit antioxidant and anti-inflammatory effects in vitro

Genistein, an isoflavone from soybean, has attracted attention due to its health benefits, particularly antioxidant and anti-inflammatory activities. Clinical applications of genistein, however, have been limited due to the considerable hydrophobicity and lower bioavailability of the molecule. In this study, carbon dots (C-dots) synthesized from genistein as the carbonaceous precursor exhibit antioxidant properties in test-tube and cell experiments. Anti-inflammatory activity of the genistein-C-dots was also recorded in LPS stimulated macrophages, manifested in inhibition of pro-inflammatory cytokine levels and enhancement anti-inflammatory cytokine expression. The antioxidant and anti-inflammatory effects of the genistein-C-dots, particularly in comparison to the parent genistein molecules, likely account to the display of functional genistein residues on the C-dots' surfaces, and low band gap energy facilitating electron scavenging. Importantly, the genistein-C-dots featured biocompatibility and low cytotoxicity, underlining their potential as a therapeutic vehicle against inflammatory conditions.

Synthesis of Multi-Stimuli Responsive Fe3O4 Coated with Diamonds Nanocomposite for Magnetic Assisted Chemo-Photothermal Therapy

Nanodiamonds with magnetic resonance imaging (MRI) and targeted drug delivery to exert combined effects for biomedical applications have been considered to be an urgent challenge. Herein, a novel bio-nanoarchitectonics (Fe₃O₄@NDs) with simultaneous imaging and therapeutic capacities was fabricated by covalently conjugating nanodiamonds (NDs) with Fe₃O₄. Fe₃O₄@NDs exhibited better biocompatibility and excellent photothermal stability with superb photothermal conversion performance (37.2%). Fe₃O₄@NDs has high doxorubicin (DOX) loading capacity (193 mg/g) with pH and NIR-responsive release characteristics. Fe₃O₄@NDs loading DOX showed a combined chemo-photothermal inhibitory effect on the tumor cells. Enhanced T₂-weighted MRI contrast toward the tumor, with the assistance of a magnetic field, convinced the Fe₃O₄@NDs gathered in the tumor more efficiently and could be used for MRI-based cancer diagnosis. Our results revealed an effective strategy to achieve a stimuli-sensitive nanoplatform for multifunctional theranostics by the combined action.

Nanomaterial-mediated photoporation for intracellular delivery

Translocation of extrinsic molecules into living cells is becoming increasingly crucial in biological studies ranging from cell engineering to biomedical applications. The concerns regarding biosafety and immunogenicity for conventional vectors and physical methods yet challenge effective intracellular delivery. Here, we begin with an overview of approaches for trans-membrane delivery up to now. These methods are featured with a relatively mature application but usually encounter low cell survival. Our review then proposes an advanced application for nanomaterial-sensitized photoporation triggered with a laser. We cover the mechanisms, procedures, and outcomes of photoporation-induced intracellular delivery with a highlight on its versatility to different living cells. We hope the review discussed here encourages researchers to further improvement and applications for photoporation-induced intracellular delivery. STATEMENT OF SIGNIFICANCE.

Advanced nanomaterials for modulating Alzheimer's related amyloid aggregation

Alzheimer's disease (AD) is a common neurodegenerative disease that brings about enormous economic pressure to families and society. Inhibiting abnormal aggregation of Aβ and accelerating the dissociation of aggregates is treated as an effective method to prevent and treat AD. Recently, nanomaterials have been applied in AD treatment due to their excellent physicochemical properties and drug activity. As a drug delivery platform or inhibitor, various excellent nanomaterials have exhibited potential in inhibiting Aβ fibrillation, disaggregating, and clearing mature amyloid plaques by enhancing the performance of drugs. This review comprehensively summarizes the advantages and disadvantages of nanomaterials in modulating amyloid aggregation and AD treatment. The design of various functional nanomaterials is discussed, and the strategies for improved properties toward AD treatment are analyzed. Finally, the challenges faced by nanomaterials with different dimensions in AD-related amyloid aggregate modulation are expounded, and the prospects of nanomaterials are proposed.

Pro-Myogenic Environment Promoted by the Synergistic Effect of Conductive Polymer Nanocomposites Combined with Extracellular Zinc Ions

A new strategy based on the combination of electrically conductive polymer nanocomposites and extracellular Zn²⁺ ions as a myogenic factor was developed to assess its ability to synergically stimulate myogenic cell response. The conductive nanocomposite was prepared with a polymeric matrix and a small amount of graphene (G) nanosheets (0.7% wt/wt) as conductive filler to produce an electrically conductive surface. The nanocomposites' surface electrical conductivity presented values in the range of human skeletal muscle tissue. The biological evaluation of the cell environment created by the combination of the conductive surface and extracellular Zn²⁺ ions showed no cytotoxicity and good cell adhesion (murine C2C12 myoblasts). Amazingly, the combined strategy, cell-material interface with conductive properties and Zn bioactive ions, was found to have a pronounced synergistic effect on myoblast proliferation and the early stages of differentiation. The ratio of differentiated myoblasts cultured on the conductive nanocomposites with extracellular Zn²⁺ ions added in the differentiation medium (serum-deprived medium) was enhanced by more than 170% over that of non-conductive surfaces (only the polymeric matrix), and more than 120% over both conductive substrates (without extracellular Zn²⁺ ions) and non-conductive substrates with extracellular Zn²⁺. This synergistic effect was also found to increase myotube density, myotube area and diameter, and multinucleated myotube formation. MyoD-1 gene expression was also enhanced, indicating the positive effect in the early stages of myogenic differentiation. These results demonstrate the great potential of this combined strategy, which stands outs for its simplicity and robustness, for skeletal muscle tissue engineering applications.

Potential Environmental and Health Implications from the Scaled-Up Production and Disposal of Nanomaterials Used in Biosensors

Biosensors often combine biological recognition elements with nanomaterials of varying compositions and dimensions to facilitate or enhance the operating mechanism of the device. While incorporating nanomaterials is beneficial to developing high-performance biosensors, at the stages of scale-up and disposal, it may lead to the unmanaged release of toxic nanomaterials. Here we attempt to foster connections between the domains of biosensors development and human and environmental toxicology to encourage a holistic approach to the development and scale-up of biosensors. We begin by exploring the toxicity of nanomaterials commonly used in biosensor design. From our analysis, we introduce five factors with a role in nanotoxicity that should be considered at the biosensor development stages to better manage toxicity. Finally, we contextualize the discussion by presenting the relevant stages and routes of exposure in the biosensor life cycle. Our review found little consensus on how the factors presented govern nanomaterial toxicity, especially in composite and alloyed nanomaterials. To bridge the current gap in understanding and mitigate the risks of uncontrolled nanomaterial release, we advocate for greater collaboration through a precautionary One Health approach to future development and a movement towards a circular approach to biosensor use and disposal.

State-of-the-art techniques for promoting tissue regeneration: Combination of three-dimensional bioprinting and carbon nanomaterials

181Biofabrication approaches, such as three-dimensional (3D) bioprinting of hydrogels, have recently garnered increasing attention, especially in the construction of 3D structures that mimic the complexity of tissues and organs with the capacity for cytocompatibility and post-printing cellular development. However, some printed gels show poor stability and maintain less shape fidelity if parameters such as polymer nature, viscosity, shear-thinning behavior, and crosslinking are affected. Therefore, researchers have incorporated various nanomaterials as bioactive fillers into polymeric hydrogels to address these limitations. Carbon-family nanomaterials (CFNs), hydroxyapatites, nanosilicates, and strontium carbonates have been incorporated into printed gels for application in various biomedical fields. In this review, following the compilation of research publications on CFNs-containing printable gels in various tissue engineering applications, we discuss the types of bioprinters, the prerequisites of bioink and biomaterial ink, as well as the progress and challenges of CFNs-containing printable gels in this field.

Reproductive and Developmental Nanotoxicity of Carbon Nanoparticles

The presented review aims to summarize the knowledge regarding the reproductive and developmental toxicity of different types of carbon nanoparticles, such as graphene, graphene oxide, multi- and single-walled nanotubes, fullerenes, and nanodiamonds. Carbon nanoparticles have unique chemical and physical properties that make them an excellent material that can be applied in many fields of human activity, including industry, food processing, the pharmaceutical industry, or medicine. Although it has a high degree of biocompatibility, possible toxic effects on different tissue types must also be taken into account. Carbon nanoparticles are known to be toxic to the respiratory, cardiovascular, nervous, digestive system, etc., and, according to current studies, they also have a negative effect on reproduction and offspring development.

Agri-Nanotechnology and Tree Nanobionics: Augmentation in Crop Yield, Biosafety, and Biomass Accumulation

Nanomaterials (NMs) are the leading edge as an amazing class of materials that consists of at least one dimension in the range of 1–100 nm. NMs can be made with exceptional magnetic, electrical, and catalytic properties different from their bulk counterparts. We summarized unique features of NMs, their synthesis, and advances in agri-nanotechnology and cutting-edge nanobionics. The review describes advances in NMs including their applications, dosimetry to ensure biosafety, remote sensing of agro-forestry fields, nanofertilizers, and nanopesticides, and avoid post-harvest losses, gene delivery, and nanobionics. Tree nanobionics has enabled the synthesis and delivery of nanosensors, which enhance the rate of photosynthesis, detection of pathogens, and poisonous residues to ensure biosafety and biomass accumulation. Finally, we conclude by discussing challenges, future perspectives, and agro-ecological risks of using NMs.

Synergistic anti-inflammatory effects of graphene oxide quantum dots and trans-10-hydroxy-2-decenoic acid on LPS-stimulated RAW 264.7 macrophage cells

Graphene oxide quantum dots (GOQDs) have attracted substantial attention in numerous fields due to their unique physicochemical properties. However, their nanotoxicity and potential for use in biomedicine still require further study. In this work, the effects of GOQD and trans- 10-hydroxy-2-decenoic acid (10-HDA) cotreatment on the immune function of macrophages (RAW264.7 cells) were investigated. In particular, LC/MS-based metabolomics was performed to evaluate the effects of GOQDs on the metabolism of LPS-stimulated macrophages. Herein, we fabricated GOQDs with good dispersibility and a uniform size distribution of approximately 7 nm using a polyimide-pyrolyzed carbon film as the working electrode, a high-voltage graphite electrode as the cathode, and H₂O₂ as the oxidant. The GOQDs entered the macrophages and emitted green fluorescence under UV irradiation. Cotreatment with GOQDs and 10-HDA induced RAW 264.7 cell proliferation. GOQDs promoted the anti-inflammatory effect of 10-HDA on LPS-stimulated RAW264.7 cells and attenuated the secretion of TNF-α, IL-6, and IL-1β. The metabolites in RAW264.7 cells treated with GOQDs were significantly different from those in RAW264.7 cells treated with LPS. The enrichment analysis showed that treatment with GOQDs interfered with amino acid metabolism, and lipid metabolism. Our results demonstrate the role of GOQDs in macrophages and provide a basis for their further application in biomedical fields.

TFEB-lysosome pathway activation is associated with different cell death responses to carbon quantum dots in Kupffer cells and hepatocytes

Background

Carbon dot has been widely used in biomedical field as a kind of nanomaterial with low toxicity and high biocompatibility. CDs has demonstrated its unique advantages in assisted drug delivery, target diagnosis and targeted therapy with its small size and spontaneous fluorescence. However, the potential biosafety of CDs cannot be evaluated. Therefore, we focused on the study of liver, the target organ involved in CDs metabolism, to evaluate the risk of CDs in vitro.

Methods and results

Liver macrophage KUP5 cells and normal liver cells AML12 cells were incubated in CDs at the same concentration for 24 h to compare the different effects under the same exposure conditions. The study found that both liver cell models showed ATP metabolism disorder, membrane damage, autophagosome formation and lysosome damage, but the difference was that, KUP5 cells exhibited more serious damage than AML12 cells, suggesting that immunogenic cell type is particularly sensitive to CDs. The underlying mechanism of CDs-induced death of the two hepatocyte types were also assessed. In KUP5 cells, death was caused by inhibition of autophagic flux caused by autophagosome accumulation, this process that was reversed when autophagosome accumulation was prevented by 3-MA. AML12 cells had no such response, suggesting that the accumulation of autophagosomes caused by CDs may be specific to macrophages.

Conclusion

Activation of the TFEB-lysosome pathway is important in regulating autophagy and apoptosis. The dual regulation of ERK and mTOR phosphorylation upstream of TFEB influences the death outcome of AML12 cells. These findings provide a new understanding of how CDs impact different liver cells and contribute to a more complete toxicological safety evaluation of CDs.

Biomaterials Based on Carbon Nanotube Nanocomposites of Poly(styrene-b-isobutylene-b-styrene): The Effect of Nanotube Content on the Mechanical Properties, Biocompatibility and Hemocompatibility

Nanocomposites based on poly(styrene-block-isobutylene-block-styrene) (SIBS) and single-walled carbon nanotubes (CNTs) were prepared and characterized in terms of tensile strength as well as bio- and hemocompatibility. It was shown that modification of CNTs using dodecylamine (DDA), featured by a long non-polar alkane chain, provided much better dispersion of nanotubes in SIBS as compared to unmodified CNTs. As a result of such modification, the tensile strength of the nanocomposite based on SIBS with low molecular weight (M_n = 40,000 g mol^-1) containing 4% of functionalized CNTs was increased up to 5.51 ± 0.50 MPa in comparison with composites with unmodified CNTs (3.81 ± 0.11 MPa). However, the addition of CNTs had no significant effect on SIBS with high molecular weight (M_n~70,000 g mol^-1) with ultimate tensile stress of pure polymer of 11.62 MPa and 14.45 MPa in case of its modification with 1 wt% of CNT-DDA. Enhanced biocompatibility of nanocomposites as compared to neat SIBS has been demonstrated in experiment with EA.hy 926 cells. However, the platelet aggregation observed at high CNT concentrations can cause thrombosis. Therefore, SIBS with higher molecular weight (M_n~70,000 g mol^-1) reinforced by 1-2 wt% of CNTs is the most promising material for the development of cardiovascular implants such as heart valve prostheses.

Nanoparticles for local delivery of siRNA in lung therapy

An overview of the application of natural and synthetic, non-viral vectors for oligonucleotide delivery into the lung is presented in this review, with a special focus on lung cancer. Due to the specificity of the respiratory tract, its structure and natural barriers, the administration of drugs (especially those based on nucleic acids) is a particular challenge. Among widely tested non-viral drug and oligonucleotides carriers, synthetic polymers seem to be most promising. Unique properties of these nanoparticles allow for essentially unlimited possibilities regarding their design and modification. This gives hope that optimal nanoparticles with ideal nucleic acid carrier properties for lung cancer therapy will eventually emanate.

Modified Nanodiamonds as a Means of Polymer Surface Functionalization. From Fouling Suppression to Biosensor Design

The development of different methods for tuning surface properties is currently of great interest. The presented work is devoted to the use of modified nanodiamonds to control the wetting and biological fouling of polymers using optical sensors as an example. We have shown that, depending on the type of modification and the amount of nanodiamonds, the surface of the same fluorinated polymer can have both bactericidal properties and, on the contrary, good adhesion to the biomaterial. The precise control of wetting and biofouling properties of the surface was achieved by the optimization of the modified nanodiamonds thermal anchoring conditions. In vitro and in vivo tests have shown that the fixation of amine functional groups leads to inhibition of biological activity, while the presence of a large number of polar groups of mixed composition (amide and acid chloride) promotes adhesion of the biomaterial and allows one to create a biosensor on-site. A comprehensive study made it possible to establish that in the first 5 days the observed biosensor response is provided by cells adhered to the surface due to the cell wall interaction. On the 7th day, the cells are fixed by means of the polysaccharide matrix, which provides much better retention on the surface and a noticeably greater response to substrate injections. Nevertheless, it is important to note that even 1.5 h of incubation is sufficient for the formation of the reliable bioreceptor on the surface with the modified nanodiamonds. The approach demonstrated in this work makes it possible to easily and quickly isolate the microbiome on the surface of the sensor and perform the necessary studies of its substrate specificity or resistance to toxic effects.

Growth, Properties, and Applications of Branched Carbon Nanostructures

Nanomaterials featuring branched carbon nanotubes (b-CNTs), nanofibers (b-CNFs), or other types of carbon nanostructures (CNSs) are of great interest due to their outstanding mechanical and electronic properties. They are promising components of nanodevices for a wide variety of advanced applications spanning from batteries and fuel cells to conductive-tissue regeneration in medicine. In this concise review, we describe the methods to produce branched CNSs, with particular emphasis on the most widely used b-CNTs, the experimental and theoretical studies on their properties, and the wide range of demonstrated and proposed applications, highlighting the branching structural features that ultimately allow for enhanced performance relative to traditional, unbranched CNSs.

Graphene Nanoribbons: Prospects of Application in Biomedicine and Toxicity

Graphene nanoribbons are a type of graphene characterized by remarkable electrical and mechanical properties. This review considers the prospects for the application of graphene ribbons in biomedicine, taking into account safety aspects. According to the analysis of the recent studies, the topical areas of using graphene nanoribbons include mechanical, chemical, photo- and acoustic sensors, devices for the direct sequencing of biological macromolecules, including DNA, gene and drug delivery vehicles, and tissue engineering. There is evidence of good biocompatibility of graphene nanoribbons with human cell lines, but a number of researchers have revealed toxic effects, including cytotoxicity and genotoxicity. Moreover, the damaging effects of nanoribbons are often higher than those of chemical analogs, for instance, graphene oxide nanoplates. The possible mechanism of toxicity is the ability of graphene nanoribbons to damage the cell membrane mechanically, stimulate reactive oxidative stress (ROS) production, autophagy, and inhibition of proliferation, as well as apoptosis induction, DNA fragmentation, and the formation of chromosomal aberrations. At the same time, the biodegradability of graphene nanoribbons under the environmental factors has been proven. In general, this review allows us to conclude that graphene nanoribbons, as components of high-precision nanodevices and therapeutic agents, have significant potential for biomedical applications; however, additional studies of their safety are needed. Particular emphasis should be placed on the lack of information about the effect of graphene nanoribbons on the organism as a whole obtained from in vivo experiments, as well as about their ecological toxicity, accumulation, migration, and destruction within ecosystems.

Fate, cytotoxicity and cellular metabolomic impact of ingested nanoscale carbon dots using simulated digestion and a triculture small intestinal epithelial model

Carbon dots (CDs) are a promising material currently being explored in many industrial applications in the biomedical and agri-food areas; however, studies supporting the environmental health risk assessment of CDs are needed. This study focuses on various CD forms including iron (FeCD) and copper (CuCD) doped CDs synthesized using hydrothermal method, their fate in gastrointestinal tract, and their cytotoxicity and potential changes to cellular metabolome in a triculture small intestinal epithelial model. Physicochemical characterization revealed that 75% of Fe in FeCD and 95% of Cu in CuCD were dissolved during digestion. No significant toxic effects were observed for pristine CDs and FeCDs. However, CuCD induced significant dose-dependent toxic effects including decreases in TEER and cell viability, increases in cytotoxicity and ROS production, and alterations in important metabolites, including D-glucose, L-cysteine, uridine, citric acid and multiple fatty acids. These results support the current understanding that pristine CDs are relatively non-toxic and the cytotoxicity is dependent on the doping molecules.

Quaternary ammonium iminofullerenes promote root growth and osmotic-stress tolerance in maize via ROS neutralization and improved energy status

In the present study, the role of quaternary ammonium iminofullerenes (IFQA) on the root growth of plant seedlings was investigated. The root elongation of Arabidopsis and maize exposed to 20 and 50 mg/L of IFQA was promoted under normal and osmotic stress conditions, respectively. In the meantime, the root active absorption area and adenosine triphosphate content in roots of maize seedlings were enhanced by IFQA treatment, however, the contents of hydrogen peroxide (H₂O₂) and malondialdehyde in roots were down-regulated. IFQA application improved glutathione transferase and glutathione reductase activities and the ratios of glutathione/oxidized glutathione and ascorbic acid/dehydroascorbic acid, and restored the inhibition of root elongation caused by the excess accumulation of H₂O₂ in roots of maize seedlings under osmotic stress. Furthermore, the expression of 14 proteins involved in cell growth, energy metabolism, and stress response in maize roots was upregulated by two-dimensional electrophoresis combined with mass spectrometry. This analysis revealed that IFQA stimulated the redox pathway to maintain balance levels of reactive oxygen species to ensure normal cell metabolism, promote energy production for root growth, and enhance osmotic-stress tolerance. It provided crucial information to elucidate the mechanism of the root growth of crop seedlings enhanced by water-soluble fullerene-based nanomaterials.

Potential strategies to prevent encrustations on urinary stents and catheters - thinking outside the box: a European network of multidisciplinary research to improve urinary stents (ENIUS) initiative

Introduction: Urinary stents have been around for the last 4 decades, urinary catheters even longer. They are associated with infections, encrustation, migration, and patient discomfort. Research efforts to improve them have shifted onto molecular and cellular levels. ENIUS brought together translational scientists to improve urinary implants and reduce morbidity.Methods & materials: A working group within the ENIUS network was tasked with assessing future research lines for the improvement of urinary implants.Topics were researched systematically using Embase and PubMed databases. Clinicaltrials.gov was consulted for ongoing trials.Areas covered: Relevant topics were coatings with antibodies, enzymes, biomimetics, bioactive nano-coats, antisense molecules, and engineered tissue. Further, pH sensors, biodegradable metals, bactericidal bacteriophages, nonpathogenic uropathogens, enhanced ureteric peristalsis, electrical charges, and ultrasound to prevent stent encrustations were addressed.Expert opinion: All research lines addressed in this paper seem viable and promising. Some of them have been around for decades but are yet to proceed to clinical application (i.e. tissue engineering). Others are very recent and, at least in urology, still only conceptual (i.e. antisense molecules). Perhaps the most important learning point resulting from this pan-European multidisciplinary effort is that collaboration between all stakeholders is not only fruitful but also truly essential.

A critical review on genotoxicity potential of low dimensional nanomaterials

Low dimensional nanomaterials (LDNMs) have earned attention among researchers as they exhibit a larger surface area to volume and quantum confinement effect compared to high dimensional nanomaterials. LDNMs, including 0-D and 1-D, possess several beneficial biomedical properties such as bioimaging, sensor, cosmetic, drug delivery, and cancer tumors ablation. However, they threaten human beings with the adverse effects of cytotoxicity, carcinogenicity, and genotoxicity when exposed for a prolonged time in industry or laboratory. Among different toxicities, genotoxicity must be taken into consideration with utmost importance as they inherit DNA related disorders causing congenital disabilities and malignancy to human beings. Many researchers have performed NMs' genotoxicity using various cell lines and animal models and reported the effect on various physicochemical and biological factors. In the present work, we have compiled a comparative study on the genotoxicity of the same or different kinds of NMs. Notwithstanding, we have included the classification of genotoxicity, mechanism, assessment, and affecting factors. Further, we have highlighted the importance of studying the genotoxicity of LDNMs and signified the perceptions, future challenges, and possible directives in the field.

Phagocytosis of polymeric nanoparticles aided activation of macrophages to increase atherosclerotic plaques in ApoE-/- mice

The unique physiochemical properties of nanomaterials have been widely used in drug delivery systems and diagnostic contrast agents. The safety issues of biomaterials with exceptional biocompatibility and hemo-compatibility have also received extensive attention at the nanoscale, especially in cardiovascular disease. Therefore, we conducted a study of the effects of poly (lactic-co-glycolic acid) nanoparticles (PLGA NPs) on the development of aortic atherosclerotic plaques in ApoE^−/− mice. The particle size of PLGA NPs was 92.69 ± 3.1 nm and the zeta potential were − 31.6 ± 2.8 mV, with good blood compatibility. ApoE^−/− mice were continuously injected with PLGA NPs intravenously for 4 and 12 weeks. Examination of oil red O stained aortic sinuses confirmed that the accumulation of PLGA NPs caused a significantly higher extension of atherosclerotic plaques and increasing the expression of associated inflammatory factors, such as TNF-α and IL-6. The combined exposure of ox-LDL and PLGA NPs accelerated the conversion of macrophages to foam cells. Our results highlight further understanding the interaction between PLGA NPs and the atherosclerotic plaques, which we should consider in future nanomaterial design and pay more attention to the process of using nano-medicines on cardiovascular diseases.

How macrophages respond to two-dimensional materials: a critical overview focusing on toxicity

With wider use of graphene-based materials and other two-dimensional (2 D) materials in various fields, including electronics, composites, biomedicine, etc., 2 D materials can trigger undesired effects at cellular, tissue and organ level. Macrophages can be found in many organs. They are one of the most important cells in the immune system and they are relevant in the study of nanomaterials as they phagocytose them. Nanomaterials have multi-faceted effects on phagocytic immune cells like macrophages, showing signs of inflammation in the form of pro-inflammatory cytokine or reactive oxidation species production, or upregulation of activation markers due to the presence of these foreign bodies. This review is catered to researchers interested in the potential impact and toxicity of 2 D materials, particularly in macrophages, focusing on few-layer graphene, graphene oxide, graphene quantum dots, as well as other promising 2 D materials containing molybdenum, manganese, boron, phosphorus and tungsten. We describe applications relevant to the growing area of 2 D materials research, and the possible risks of ions and molecules used in the production of these promising 2 D materials, or those produced by the degradation and dissolution of 2 D materials.

Applications of natural product-derived carbon dots in cancer biology

Natural products have contributed conspicuously to the development of innovative nanomedicines. Hence, the interface between nanomaterial science and plant natural products may bestow comprehensive diagnostic and therapeutic strategies for tackling diseases such as cancer and neurological disorders. Natural product-derived carbon dots (NPdCDs) have revealed noteworthy attributes in the fields of cancer theranostics, microbial imaging, drug sensing and drug delivery. As plants consist of a cocktail of bioactive phytomolecules, the NPdCDs can be anticipated to have medicinal properties, biocompatibility, photo-stability and easy functionalization. NPdCDs have wide-ranging applications. The primary objective of this review is to comment on recent developments in the use of NPdCDs, with special reference to their application in cancer biology. The future of the use of NPdCDs has also been considered.

Potential applicability of polyethyleneimine PEI-coated Eu2O3 and Dy2O3 nanoparticles for contrast enhancement in computed tomography

Rare-earth metal oxide nanoparticles considered promising contrast agents for x-ray computed tomography (CT) and magnetic resonance imaging (MRI). The main purpose of this study is to investigate the potential applicability of polyethyleneimine (PEI)-coated Eu2O3 and Dy2O3 nanoparticles (NPs) for CT x-ray attenuation. Morphology and other physicochemical properties of prepared samples were systematically investigated using a range of characterization tools. Preliminary cytotoxicity experiments with L-929 fibroblastic cells suggested that both samples have no significant toxicity at concentrations below 100 μg ml−1. Clinical CT analysis shows that PEI@Eu2O3 NPs exhibit higher x-ray attenuation efficiency (∼8 HU mM−1) as compared to PEI@Dy2O3 NPs (∼5 HU mM−1).

Recent Developments in the Application of Nanomaterials in Agroecosystems

Nanotechnology implies the scientific research, development, and manufacture, along with processing, of materials and structures on a nano scale. Presently, the contamination of metalloids and metals in the soil has gained substantial attention. The consolidation of nanomaterials and plants in ecological management has received considerable research attention because certain nanomaterials could enhance plant seed germination and entire plant growth. Conversely, when the nanomaterial concentration is not properly controlled, toxicity will definitely develop. This paper discusses the role of nanomaterials as: (1) nano-pesticides (for improving the plant resistance against the biotic stress); and (2) nano-fertilizers (for promoting the plant growth by providing vital nutrients). This review analyzes the potential usages of nanomaterials in agroecosystem. In addition, the adverse effects of nanomaterials on soil organisms are discussed. We mostly examine the beneficial effects of nanomaterials such as nano-zerovalent iron, iron oxide, titanium dioxide, nano-hydroxyapatite, carbon nanotubes, and silver- and copper-based nanomaterials. Some nanomaterials can affect the growth, survival, and reproduction of soil organisms. A change from testing/using nanomaterials in plants for developing nanomaterials depending on agricultural requirements would be an important phase in the utilization of nanomaterials in sustainable agriculture. Conversely, the transport as well as ecological toxicity of nanomaterials should be seriously examined for guaranteeing its benign usage in agriculture.

Near-infrared emission Cu, N-doped carbon dots for human umbilical vein endothelial cell labeling and their biocompatibility in vitro

Quantum dots (QDs) are luminescent semiconductor nanomaterials (NMs) with various biomedical applications, but the high toxicity associated with traditional QDs, such as Cd-based QDs, limits their uses in biomedicine. As such, the development of biocompatible metal-free QDs has gained extensive research interests. In this study, we synthesized near-infrared emission Cu, N-doped carbon dots (CDs) with optimal emission at 640 nm and a fluorescence quantum yield of 27.1% (in N,N-dimethylformamide [DMF]) by solvothermal method using o-phenylenediamine and copper acetate monohydrate. We thoroughly characterized the CDs and showed that they were highly fluorescent and stable under different conditions, although in highly acidic (pH = 1-2) or alkaline (pH = 12-13) solutions, a redshift or blueshift of fluorescence emission peak of Cu, N-doped CDs was also observed. When exposed to human umbilical vein endothelial cells (HUVECs), Cu, N-doped CDs only significantly induced cytotoxicity at very high concentrations (100 or 200 μg/ml), but their cytotoxicity appeared to be comparable with carbon black (CB) nanoparticles (NPs) at the same mass concentrations. As the mechanisms, 200 μg/ml Cu, N-doped CDs and CB NPs promoted endoplasmic reticulum (ER) stress proteins IRE1α and chop, leading to increased cleaved caspase 3/pro-caspase 3 ratio, but CB NPs were more effective. At noncytotoxic concentration (50 μg/ml), Cu, N-doped CDs successfully labeled HUVECs. In summary, we successfully prepared highly fluorescent and relatively biocompatible CDs to label HUVECs in vitro.

Learning from Nature: Bioinspired Chlorin-Based Photosensitizers Immobilized on Carbon Materials for Combined Photodynamic and Photothermal Therapy

Chlorophylls, which are chlorin-type photosensitizers, are known as the key building blocks of nature and are fundamental for solar energy metabolism during the photosynthesis process. In this regard, the utilization of bioinspired chlorin analogs as photosensitizers for photodynamic therapy constitutes an evolutionary topic of research. Moreover, carbon nanomaterials have been widely applied in photodynamic therapy protocols due to their optical characteristics, good biocompatibility, and tunable systematic toxicity. Herein, we review the literature related to the applications of chlorin-based photosensitizers that were functionalized onto carbon nanomaterials for photodynamic and photothermal therapies against cancer. Rather than a comprehensive review, we intended to highlight the most important and illustrative examples over the last 10 years.

Recent Advances on Graphene Quantum Dots for Bioimaging Applications

Being a zero-dimensional (0D) nanomaterial of the carbon family, graphene quantum dots (GQDs) showed promising biomedical applications owing to their ultra-small size, non-toxicity, biocompatibility, excellent photo stability, tunable fluorescence, and water solubility, etc., thus capturing a considerable attention in biomedical field. This review summarizes the recent advances made in the research field of GQDs and place special emphasis on their bioimaging applications. We briefly introduce the synthesis strategies of GQDs, including top-down and bottom-up strategies. The bioimaging applications of GQDs are also discussed in detail, including optical [fluorescence (FL)], two-photon FL, magnetic resonance imaging (MRI), and dual-modal imaging. In the end, the challenges and future prospects to advance the clinical bioimaging applications of GQDs have also been addressed.

Application of Zero-Dimensional Nanomaterials in Biosensing

Zero-dimensional (0D) nanomaterials, including graphene quantum dots (GQDs), carbon quantum dots (CQDs), fullerenes, inorganic quantum dots (QDs), magnetic nanoparticles (MNPs), noble metal nanoparticles, upconversion nanoparticles (UCNPs) and polymer dots (Pdots), have attracted extensive research interest in the field of biosensing in recent years. Benefiting from the ultra-small size, quantum confinement effect, excellent physical and chemical properties and good biocompatibility, 0D nanomaterials have shown great potential in ion detection, biomolecular recognition, disease diagnosis and pathogen detection. Here we first introduce the structures and properties of different 0D nanomaterials. On this basis, recent progress and application examples of 0D nanomaterials in the field of biosensing are discussed. In the last part, we summarize the research status of 0D nanomaterials in the field of biosensing and anticipate the development prospects and future challenges in this field.

Nanostructured Materials for Artificial Tissue Replacements

This paper review current trends in applications of nanomaterials in tissue engineering. Nanomaterials applicable in this area can be divided into two groups: organic and inorganic. Organic nanomaterials are especially used for the preparation of highly porous scaffolds for cell cultivation and are represented by polymeric nanofibers. Inorganic nanomaterials are implemented as they stand or dispersed in matrices promoting their functional properties while preserving high level of biocompatibility. They are used in various forms (e.g., nano- particles, -tubes and -fibers)-and when forming the composites with organic matrices-are able to enhance many resulting properties (biologic, mechanical, electrical and/or antibacterial). For this reason, this contribution points especially to such type of composite nanomaterials. Basic information on classification, properties and application potential of single nanostructures, as well as complex scaffolds suitable for 3D tissues reconstruction is provided. Examples of practical usage of these structures are demonstrated on cartilage, bone, neural, cardiac and skin tissue regeneration and replacements. Nanomaterials open up new ways of treatments in almost all areas of current tissue regeneration, especially in tissue support or cell proliferation and growth. They significantly promote tissue rebuilding by direct replacement of damaged tissues.

Carbon dots as versatile nanoarchitectures for the treatment of neurological disorders and their theranostic applications: A review

The development of novel methods plays a fundamental role in early diagnosis and controlling of neurological disorders (NDs). Blood-brain barrier (BBB) is the most challenging barrier for the development of neuro drug delivery systems due to its inhibiting ability to enter drugs and agents into central nervous system (CNS). Carbon dots (CDs) have shown to be very promising and outstanding agents for various biomedical applications (bio imaging studies, treatment of NDs and brain tumors). They exhibit remarkable properties such as biocompatibility, small size (less than 10 nm, enabling penetration into BBB), tunable optical properties, photostability and simple synthetic procedures, allowing them to act as ideal candidates in various fields of science. Therefore, the objective of this review is to overview the recent studies on CDs for the development of neuro drug delivery systems to reach CNS via crossing of BBB. Primarily, this review briefly outlines the unique optical properties and toxicity of CDs. The development of novel neuro drug delivery systems for various neurological disorders using CDs as carriers is described. This review also covers the potential applications of CDs in brain tumors imaging and treatment of neurodegenerative diseases. Finally, the sensing applications and future prospects of CDs are summarized.

Comparison of the Level and Mechanisms of Toxicity of Carbon Nanotubes, Carbon Nanofibers, and Silicon Nanotubes in Bioassay with Four Marine Microalgae

Nanoparticles (NPs) have various applications in medicine, cosmetics, optics, catalysis, environmental purification, and other areas nowadays. With an increasing annual production of NPs, the risks of their harmful influence to the environment and human health is rising. Currently, our knowledge about the mechanisms of interaction between NPs and living organisms is limited. Additionally, poor understanding of how physical and chemical characteristic and different conditions influence the toxicity of NPs restrict our attempts to develop the standards and regulations which might allow us to maintain safe living conditions. The marine species and their habitat environment are under continuous stress due to anthropogenic activities which result in the appearance of NPs in the aquatic environment. Our study aimed to evaluate and compare biochemical effects caused by the influence of different types of carbon nanotubes, carbon nanofibers, and silica nanotubes on four marine microalgae species. We evaluated the changes in growth-rate, esterase activity, membrane polarization, and size changes of microalgae cells using flow cytometry method. Our results demonstrated that toxic effects caused by the carbon nanotubes strongly correlated with the content of heavy metal impurities in the NPs. More hydrophobic carbon NPs with less ordered structure had a higher impact on the red microalgae P. purpureum because of higher adherence between the particles and mucous covering of the algae. Silica NPs caused significant inhibition of microalgae growth-rate predominantly produced by mechanical influence.

Differential properties and effects of fluorescent carbon nanoparticles towards intestinal theranostics

Given the potential applications of fluorescent carbon nanoparticles in biomedicine, the relationship between their chemical structure, optical properties and biocompatibility has to be investigated in detail. In this work, different types of fluorescent carbon nanoparticles are synthesized by acid treatment, sonochemical treatment, electrochemical cleavage and polycondensation. The particle size ranges from 1 to 6 nm, depending on the synthesis method. Nanoparticles that were prepared by acid or sonochemical treatments from graphite keep a crystalline core and can be classified as graphene quantum dots. The electrochemically produced nanoparticles do not clearly show the graphene core, but it is made of heterogeneous aromatic structures with limited size. The polycondensation nanoparticles do not have CC double bonds. The type of functional groups on the carbon backbone and the optical properties, both absorbance and photoluminescence, strongly depend on the nanoparticle origin. The selected types of nanoparticles are compatible with human intestinal cells, while three of them also show activity against colon cancer cells. The widely different properties of the nanoparticle types need to be considered for their use as diagnosis markers and therapeutic vehicles, specifically in the digestive system.