Chitosan-Modified PLGA Nanoparticles for Control-Released Drug Delivery

Assessment of enhancing curcumin's solubility versus uptake on its anti-cancer efficacy

Curcumin (CUR) exhibits anti-inflammatory and anti-cancer activities. However, its poor solubility and bioavailability limit its therapeutic applications. Several CUR nano-formulations have been developed to enhance its solubility and uptake, thereby improving its anti-cancer activity. Despite this, studies comparing the effect of enhanced CUR solubility versus cellular uptake on its anti-cancer efficacy are lacking. Therefore, CUR nanofibers (CUR NF) were synthesized by electrospinning using a water-soluble polymer to enhance CUR solubility. While CUR nanoparticles (CUR NP) were synthesized by nanoprecipitation method using a water-insoluble polymer to enhance CUR cellular uptake. Both nano-formulations aim to improve CUR cellular concentration and anti-cancer activity against various cancer cells. CUR NF and CUR NP were successfully synthesized at drug load (DL%) of 10 %, 20 %, and 40 % w/w. Both nano-formulations were characterized, and CUR dissolution, release, cytotoxicity, IC50, and cellular uptake were assessed. A gradual increase in NF diameter and NP size was observed as the drug load% increased compared to the placebo. NF showed a rapid CUR release and increased solubility by 16-38 fold. In contrast, NP sustained CUR release and resulted in only a 2-fold increase in solubility. Both formulations significantly reduced cell viability and IC50 compared to free CUR. However, CUR NP demonstrated higher cell toxicity (70-80 %) than CUR NF (60 %) and reduced IC50 up to 4 μM compared to 11 μM for NF. Enhancing CUR solubility or uptake can significantly increase its cellular concentration and anti-cancer activity. However, enhancing CUR cellular uptake by NP demonstrated superior anti-cancer effect compared to enhancing its solubility by NF.

Chitosan-PLGA mucoadhesive nanoparticles for gemcitabine repurposing for glioblastoma therapy

Glioblastoma (GBM) is a highly deadly brain tumor that does not respond satisfactorily to conventional treatment. The non-alkylating agent gemcitabine (GEM) has been proposed for treating GBM. It can overcome MGMT protein-mediated resistance, a major limitation of conventional therapy with the alkylating agent temozolomide (TMZ). However, GEM's high systemic toxicity and poor permeability across the blood-brain barrier (BBB) pose significant challenges for its delivery to the brain. Thus, mucoadhesive poly(lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) coated with chitosan (CH), suitable for intranasal GEM delivery, were proposed in this work. A central composite design (CCD) was implemented for NPs optimization, and NPs with appropriate characteristics for intranasal administration were obtained. in vitro studies revealed that the NPs possess excellent mucoadhesive properties and the ability to selectively release GEM in the simulated tumor tissue environment. in vitro studies using two human GBM cell lines (U215 and T98G) revealed the NPs' ability to promote GEM's antiproliferative activity to sensitize cells to the effect of TMZ. The findings of this work demonstrate that the developed CH-GEM-NPs are suitable delivery systems for GEM, both as a single therapy and as a chemosensitizer to the GBM gold standard therapy.

Redox-Sensitive Poly(lactic-co-glycolic acid) Nanoparticles of Palbociclib: Development, Ultrasound/Photoacoustic Imaging, and Smart Breast Cancer Therapy

Breast cancer is one of the leading causes of mortality in women globally. The efficacy of breast cancer treatments, notably chemotherapy, is hampered by inadequate localized delivery of anticancer agents to the tumor site, resulting in compromised efficacy and increased systemic toxicity. In this study, we have developed redox-sensitive poly(lactic-co-glycolic acid) (PLGA) nanoparticles for the smart delivery of palbociclib (PLB) to breast cancer. The particle size of formulated PLB@PLGA-NPs (nonredox-sensitive) and RS-PLB@PLGA-NPs (redox-sensitive) NPs were 187.1 ± 1.8 nm and 193.7 ± 1.5 nm, respectively. The zeta potentials of nonredox-sensitive and redox-sensitive NPs were +24.99 ± 2.67 mV and +9.095 ± 1.87 mV, respectively. The developed NPs were characterized for morphological and various physicochemical parameters such as SEM, TEM, XRD, DSC, TGA, XPS, etc. The % entrapment efficiency of PLB@PLGA-NPs and RS-PLB@PLGA-NPs was found to be 85.48 ± 1.29% and 87.72 ± 1.55%, respectively. RS-PLB@PLGA-NPs displayed a rapid drug release at acidic pH and a higher GSH concentration compared to PLB@PLGA-NPs. The cytotoxicity assay in MCF-7 cells suggested that PLB@PLGA-NPs and RS-PLB@PLGA-NPs were 5.24-fold and 14.53-fold higher cytotoxic compared to the free PLB, respectively. Further, the cellular uptake study demonstrated that redox-sensitive NPs had significantly higher cellular uptake compared to nonredox-sensitive NPs and free Coumarin 6 dye. Additionally, AO/EtBr assay and reactive oxygen species analysis confirmed the superior activity of RS-PLB@PLGA-NPs over PLB@PLGA-NPs and free PLB. In vivo anticancer activity in dimethyl-benz(a)anthracene-induced breast cancer rats depicted that RS-PLB@PLGA-NPs was highly effective in reducing the tumor size, hypoxic tumor, and tumor vascularity compared to PLB@PLGA-NPs and free PLB. Further, hemocompatibility study reveals that the developed NPs were nonhemolytic to human blood. Moreover, an in vivo histopathology study confirmed that both nanoparticles were safe and nontoxic to the vital organs.

Engineering the protein corona: Strategies, effects, and future directions in nanoparticle therapeutics

Nanoparticles (NPs) serve as versatile delivery systems for anticancer, antibacterial, and antioxidant agents. The manipulation of protein-NP interactions within biological systems is crucial to the application of NPs in drug delivery and cancer nanotherapeutics. The protein corona (PC) that forms on the surface of NPs is the interface between biomacromolecules and NPs and significantly influences their pharmacokinetics and pharmacodynamics. Upon encountering proteins, NPs undergo surface alterations that facilitate their clearance from circulation by the mononuclear phagocytic system (MPS). PC behavior depends largely on the biological microenvironment and the physicochemical properties of the NPs. This review describes various strategies employed to engineer PC compositions on NP surfaces. The effects of NP characteristics such as size, shape, surface modification and protein precoating on PC performance were explored. In addition, this study addresses these challenges and guides the future directions of this evolving field.

Central composite design augmented quality-by-design-based systematic formulation of erlotinib hydrochloride-loaded chitosan-poly (lactic-co-glycolic acid) nanoparticles

Aim: This study aimed to formulate erlotinib hydrochloride (ERT-HCL)-loaded chitosan (CS) and poly (lactic-co-glycolic acid) (PLGA) nanoparticles (NPs) using Quality-by-Design (QbD) to optimize critical quality attributes (CQAs). Materials & methods: Quality target product profile (QTPP) and CQAs were initially established. Based on L8-Taguchi screening and risk assessments, central composite design (CCD) design was used to optimize NPs. Results: ERT-HCL-loaded CS-PLGA NPs had a mean particle diameter, zeta potential and entrapment efficiency of 226.50 ± 1.62 d.nm, 27.66 ± 0.64 mV and 78.93 ± 1.94 %w/w, respectively. The NPs exhibited homogenous spherical morphology and sustained release for 72 h. Conclusion: Using systematic QbD approach, ERT-HCL was encapsulated in CS-PLGA NPs, optimizing CQAs. These findings propel future research for improved NSCLC treatment.

Impact of Nebulization on the Physicochemical Properties of Polymer-Lipid Hybrid Nanoparticles for Pulmonary Drug Delivery

Nanoparticles (NPs) have shown significant potential for pulmonary administration of therapeutics for the treatment of chronic lung diseases in a localized and sustained manner. Nebulization is a suitable method of NP delivery, particularly in patients whose ability to breathe is impaired due to lung diseases. However, there are limited studies evaluating the physicochemical properties of NPs after they are passed through a nebulizer. High shear stress generated during nebulization could potentially affect the surface properties of NPs, resulting in the loss of encapsulated drugs and alteration in the release kinetics. Herein, we thoroughly examined the physicochemical properties as well as the therapeutic effectiveness of Infasurf lung surfactant (IFS)-coated PLGA NPs previously developed by us after passing through a commercial Aeroneb® vibrating-mesh nebulizer. Nebulization did not alter the size, surface charge, IFS coating and bi-phasic release pattern exhibited by the NPs. However, there was a temporary reduction in the initial release of encapsulated therapeutics in the nebulized compared to non-nebulized NPs. This underscores the importance of evaluating the drug release kinetics of NPs using the inhalation method of choice to ensure suitability for the intended medical application. The cellular uptake studies demonstrated that both nebulized and non-nebulized NPs were less readily taken up by alveolar macrophages compared to lung cancer cells, confirming the IFS coating retention. Overall, nebulization did not significantly compromise the physicochemical properties as well as therapeutic efficacy of the prepared nanotherapeutics.

Study of the Synergistic Immunomodulatory and Antifibrotic Effects of Dual-Loaded Budesonide and Serpine1 siRNA Lipid-Polymer Nanoparticles Targeting Macrophage Dysregulation in Tendinopathy

Musculoskeletal diseases involving tissue injury comprise tendon, ligament, and muscle injury. Recently, macrophages have been identified as key players in the tendon repair process, but no therapeutic strategy involving dual drug delivery and gene delivery to macrophages has been developed for targeting the two main dysregulated aspects of macrophages in tendinopathy, i.e., inflammation and fibrosis. Herein, the anti-inflammatory and antifibrotic effects of dual-loaded budesonide and serpine1 siRNA lipid-polymer hybrid nanoparticles (LPNs) are evaluated in murine and human macrophage cells. The modulation of the gene and protein expression of factors associated with inflammation and fibrosis in tendinopathy is demonstrated by real time polymerase chain reaction and Western blot. Macrophage polarization to the M2 phenotype and a decrease in the production of pro-inflammatory cytokines are confirmed in macrophage cell lines and primary cells. The increase in the activity of a matrix metalloproteinase involved in tissue remodelling is proven, and studies evaluating the interactions of LPNs with T cells proved that dual-loaded LPNs act specifically on macrophages and do not induce any collateral effects on T cells. Overall, these dual-loaded LPNs are a promising combinatorial therapeutic strategy with immunomodulatory and antifibrotic effects in dysregulated macrophages in the context of tendinopathy.

Chitosan nanoparticle applications in dentistry: a sustainable biopolymer

The epoch of Nano-biomaterials and their application in the field of medicine and dentistry has been long-lived. The application of nanotechnology is extensively used in diagnosis and treatment aspects of oral diseases. The nanomaterials and its structures are being widely involved in the production of medicines and drugs used for the treatment of oral diseases like periodontitis, oral carcinoma, etc. and helps in maintaining the longevity of oral health. Chitosan is a naturally occurring biopolymer derived from chitin which is seen commonly in arthropods. Chitosan nanoparticles are the latest in the trend of nanoparticles used in dentistry and are becoming the most wanted biopolymer for use toward therapeutic interventions. Literature search has also shown that chitosan nanoparticles have anti-tumor effects. This review highlights the various aspects of chitosan nanoparticles and their implications in dentistry.

Effects of solid lipid nanocarrier containing methyl urolithin A by coating folate-bound chitosan and evaluation of its anti-cancer activity

BACKGROUND

Nanotechnology-based drug delivery systems have received much attention over the past decade. In the present study, we synthesized Methyl Urolithin A-loaded solid lipid nanoparticles decorated with the folic acid-linked chitosan layer called MuSCF-NPs and investigated their effects on cancer cells.

METHODS

MuSCF-NPs were prepared using a high-pressure homogenization method and characterized using FTIR, FESEM, DLS, and zeta potential methods. Drug encapsulation was assessed by spectrophotometry and its cytotoxic effect on various cancer cells (MDA-MB231, MCF-7, PANC, AGS, and HepG2) by the MTT method. Antioxidant activity was assessed by the ABTS and DPPH methods, followed by expression of genes involved in oxidative stress and apoptosis by qPCR and flow cytometry.

RESULTS

The results showed the formation of monodisperse and stable round nanoparticles with a size of 84.8 nm. The drug loading efficiency in MuSCF-NPs was reported to be 88.6%. MuSCF-NPs exhibited selective cytotoxicity against MDA-MB231 cells (IC50 = 40 μg/mL). Molecular analysis showed a significant increase in the expression of Caspases 3, 8, and 9, indicating that apoptosis was occurring in the treated cells. Moreover, flow cytometry results showed that the treated cells were arrested in his SubG1 phase, confirming the pro-apoptotic effect of the nanoparticles. The results indicate a high antioxidant effect of the nanoparticles with IC50 values ​​of 45 μg/mL and 1500 μg/mL against ABTS and DPPH, respectively. The reduction of catalase gene expression confirmed the pro-oxidant effect of nanoparticles in cancer cells treated at concentrations of 20 and 40 μg/mL.

CONCLUSIONS

Therefore, our findings suggest that the MuSCF-NPs are suitable candidates, especially for breast cancer preclinical studies.

Folate-Mediated Targeting and Controlled Release: PLGA-Encapsulated Mesoporous Silica Nanoparticles Delivering Capecitabine to Pancreatic Tumor

The discovery of specifically tailored therapeutic delivery systems has sparked the interest of pharmaceutical researchers considering improved therapeutic effectiveness and fewer adverse effects. The current study concentrates on the design and characterization of PLGA (polylactic-co-glycolic acid) capped mesoporous silica nanoparticles (MSN)-based systems for drug delivery for pH-sensitive controlled drug release in order to achieve a targeted drug release inside the acidic tumor microenvironment. The physicochemical properties of the nanoformulations were analyzed using TEM, zeta potential, AFM, TGA, FTIR, and BET analyses in addition to DLS size. The final formed PLGA-FoA-MSN-CAP and pure MSN had sizes within the therapeutic ranges of 164.5 ± 1.8 and 110.7 ± 2.2, respectively. Morphological characterization (TEM and AFM) and elemental analysis (FTIR and XPS) confirmed the proper capping and tagging of PLGA and folic acid (FoA). The PLGA-coated FoA-MSN exhibited a pH-dependent controlled release of the CAP (capecitabine) drug, showing efficient release at pH 6.8. Furthermore, the in vitro MTT test on PANC1 and MIAPaCa-2 resulted in an IC50 value of 146.37 μg/ml and 105.90 μg/ml, respectively. Mitochondrial-mediated apoptosis was confirmed from the caspase-3 and annexin V/PI flow cytometry assay, which displayed a cell cycle arrest at the G1 phase. Overall, the results predicted that the designed nanoformulation is a potential therapeutic agent in treating pancreatic cancer.

The next-generation DNA vaccine platforms and delivery systems: advances, challenges and prospects

Vaccines have proven effective in the treatment and prevention of numerous diseases. However, traditional attenuated and inactivated vaccines suffer from certain drawbacks such as complex preparation, limited efficacy, potential risks and others. These limitations restrict their widespread use, especially in the face of an increasingly diverse range of diseases. With the ongoing advancements in genetic engineering vaccines, DNA vaccines have emerged as a highly promising approach in the treatment of both genetic diseases and acquired diseases. While several DNA vaccines have demonstrated substantial success in animal models of diseases, certain challenges need to be addressed before application in human subjects. The primary obstacle lies in the absence of an optimal delivery system, which significantly hampers the immunogenicity of DNA vaccines. We conduct a comprehensive analysis of the current status and limitations of DNA vaccines by focusing on both viral and non-viral DNA delivery systems, as they play crucial roles in the exploration of novel DNA vaccines. We provide an evaluation of their strengths and weaknesses based on our critical assessment. Additionally, the review summarizes the most recent advancements and breakthroughs in pre-clinical and clinical studies, highlighting the need for further clinical trials in this rapidly evolving field.

Evaluation of the effect of designed PLGA-arctiin nanoparticles modified with folic acid and chitosan on colon cancer cells

In this study, we designed nanoparticles (NPs) based on polylactic acid glycolic acid modified with chitosan and folic acid to optimize the anti-cancer, anti-inflammatory, and antioxidant effects of arctiin (ARC), and we measured its effects on cancer cells, including colon cancer. NPs were synthesized using the W1/O/W2 double-emulsion solvent evaporation method. Physicochemical characteristics of synthesized NPs (ARC-PCF-NPs), including average particle size, dispersity index (PDI), zeta potential (ZP), field emission scanning electron microscope figures, and encapsulation efficiency (EE), were evaluated. 2,2'-Azino-bis(3-ethylbenzothiazoline-6-sulfonic acid) (ABTS), 2,2-diphenyl-1-picrylhydrazyl (DPPH), and ferric reducing antioxidant power (FRAP) methods were carried out to determine the antioxidant properties of NPs. 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyl-2H-tetrazolium bromide assay was performed to investigate cytotoxicity effects on cancer cells and normal fibroblasts. Quantitative polymerase chain reaction was also performed on inflammatory and antioxidant genes. The obtained results indicated that the synthesized NPs have a size of 100 nm, a DPI of 0.36, a ZP of 26.30 mV, and EE was calculated at about 87.5%. The antioxidant influence of ARC-PCF-NPs was confirmed by inhibiting ABTS and DPPH free radicals and ferrous reduction in the FRAP method. Moreover, the reduction of inflammatory and antioxidant genes confirmed the anti-inflammatory and antioxidant properties of NPs. These results indicate the modification of the surface of NPs in order to increase the bioavailability, stability, and effectiveness of medicinal compounds in therapeutic applications.

An antibacterial nanoclay- and chitosan-based quad composite with controlled drug release for infected skin wound healing

Microbial infections of surgical sites and other wounds represent a major impediment for patients. Multifunctional low-cost dressings promoting tissue reparation while preventing infections are of great interest to medical professionals. Here, clay-based laponite nanodiscs (LAP) were loaded with the antibacterial drug kanamycin (KANA) before being embedded into a poly(lactic-co-glycolic acid) (PLGA) membrane and coated with the biopolymer chitosan (CS). Results indicated that these biocompatible materials combined the excellent capacity of LAP for controlled drug release with the mechanical robustness of PLGA and the antibacterial properties of CS as well as its hydrophilicity to form a composite highly suitable as an infection-preventing wound dressing. In vitro, PLGA/LAP/KANA/CS released drugs in a sustainable manner over 30 d, completely inhibited the growth of infectious bacteria, prompted the adhesion fibroblasts, and accelerated their proliferation 1.3 times. In vivo, the composite enabled the fast healing of infected full-thickness skin wounds with a 96.19 % contraction after 14 d. During the healing process, PLGA/LAP/KANA/CS stimulated re-epithelization, reduced inflammation, and promoted both angiogenesis and the formation of dense collagen fibers with an excellent final collagen volume ratio of 89.27 %. Thus, multifunctional PLGA/LAP/KANA/CS made of low-cost components demonstrated its potential for the treatment of infected skin wounds.

Targosomes: Anti-HER2 PLGA nanocarriers for bioimaging, chemotherapy and local photothermal treatment of tumors and remote metastases

Developing combined cancer therapy strategies is of utmost importance as it can enhance treatment efficacy, overcome drug resistance, and ultimately improve patient outcomes by targeting multiple pathways and mechanisms involved in cancer growth and progression. Specifically, the potential of developing a combination chemo&photothermal therapy using targeted polymer nanoparticles as nanocarriers offers a promising approach for synergistic cancer treatment by combining the benefits of both therapies, such as targeted drug delivery and localized hyperthermia. Here, we report the first targeted anti-HER2 PLGA nanocarriers, called targosomes, that simultaneously possess photothermal, chemotherapeutic and diagnostic properties using only molecular payloads. Biocompatible poly(lactic-co-glycolic acid), PLGA, nanoparticles were loaded with photosensitizer phthalocyanine, diagnostic dye Nile Blue, and chemotherapeutic drug irinotecan, which was chosen as a result of screening a panel of theragnostic nanoparticles. The targeted delivery to cell surface oncomarker HER2 was ensured by nanoparticle modification with the anti-HER2 monoclonal antibody, trastuzumab, using the one-pot synthesis method without chemical conjugation. The irradiation tests revealed prominent photothermal properties of nanoparticles, namely heating by 35 °C in 10 min. Nanoparticles exhibited a 7-fold increase in binding and nearly an 18-fold increase in cytotoxicity for HER2-overexpressing cells compared to cells lacking HER2 expression. This enhancement of cytotoxicity was further amplified by >20-fold under NIR light irradiation. In vivo studies proved the efficacy of nanoparticles for bioimaging of primary tumor and metastasis sites and demonstrated 93% tumor growth inhibition, making these nanoparticles excellent candidates for translation into theragnostic applications.

Fucoidan-mediated targeted delivery of dasatinib-loaded nanoparticles amplifies apoptosis and endows cytotoxic potential in triple-negative breast cancer

Dasatinib (DST) is a tyrosine kinase inhibitor with established antiproliferative activity in Triple-negative breast cancer. Conventional treatment strategies with DST have several pitfalls related to the development of resistance, lower cellular uptake and unwanted adverse effects. To address these issues, we have prepared P-selectin-targeted nanoparticles of DST with fucoidan (FUC) as a ligand. Poly lactide-co-glycolide nanoparticles of DST were coated with chitosan (CH) and FUC via electrostatic interaction (DST-CH-FUC-NPs). The mean particle size of 210.36 ± 0.66 nm and a polydispersity index of 0.234 ± 0.013 was observed for DST-CH-FUC-NPs. TEM and FTIR analysis proved CH coating followed by an FUC layer on nanoparticles. DST-CH-FUC-NPs showed a sustained release profile up to 120 h and 2.9 times less hemolytic potential than free DST suspension. DST-CH-FUC-NPs demonstrated 8-fold higher cytotoxicity compared to free DST in MDA-MB-231 cells. Rhodamine-CH-FUC- NPs showed 19 times and 3 times higher cellular uptake than free Rhodamine and Rhodamine-CH-NPs, respectively. DST-CH-FUC-NPs also displayed increased ROS production and mitochondrial membrane potential damage. Apoptosis study revealed a 7.5-fold higher apoptosis index for DST-CH-FUC-NPs than free DST. Subsequently, the DST-CH-FUC-NPs showed increased inhibition of cell migration, where approximately 5 % wound closure was noted. Further, DST-CH-FUC-NPs confirmed higher disruption of lysosomal membrane integrity, which is well correlated with apoptosis results. In addition, developed NPs were nontoxic on MCF 10 A normal cells. All these findings suggest that fabricated DST-CH-FUC-NPs are promising biocompatible carriers for tumor-targeted delivery and enhanced efficacy of dasatinib.

Biodegradable AZ91 magnesium alloy/sirolimus/poly D, L-lactic-co-glycolic acid-based substrate for cardiovascular device application

Biodegradable drug-eluting stents (DESs) are gaining importance owing to their attractive features, such as complete drug release to the target site. Magnesium (Mg) alloys are promising materials for future biodegradable DESs. However, there are few explorations using biodegradable Mg for cardiovascular stent application. In this present study, sirolimus-loaded poly D, L-lactic-co-glycolic acid (PLGA)-coated/ sirolimus-fixed/AZ91 Mg alloy-based substrate was developed via a layer-by-layer approach for cardiovascular stent application. The AZ91 Mg alloy was prepared through the squeeze casting technique. The casted AZ91 Mg alloy (Mg) was alkali-treated to provide macroporous networks to hold the sirolimus and PLGA layers. The systematic characterization was investigated via electrochemical, optical, physicochemical, and in-vitro biological characteristics. The presence of the Mg17 Al12 phase in the Mg sample was found in the x-ray diffraction system (XRD) spectrum which influences the corrosion behavior of the developed substrate. The alkali treatment increases the substrate's hydrophilicity which was confirmed through static contact angle measurement. The anti-corrosion characteristic of casted-AZ91 Mg alloy (Mg) was slightly less than the sirolimus-loaded PLGA-coated alkali-treated AZ91 Mg alloy (Mg/Na/S/P) substrate. However, dissolution rates for both substrates were found to be controlled at cell culture conditions. Radiographic densities of AZ91 Mg alloy substrates (Mg, Mg/Na, and Mg/Na/S/P) were measured to be 0.795 ± 0.015, 0.742 ± 0.01, and 0.712 ± 0.017, respectively. The star-shaped structure of 12% sirolimus/PLGA ensures the bioavailability of the drugs. Sirolimus release kinetic was fitted up to 80% with the "Higuchi model" for Mg samples, whereas Mg/Na/S/P showed 45% fitting with a zero-order mechanism. The Mg/Na/S/P substrate showed a 70% antithrombotic effect compared to control. Further, alkali treatment enhances the antibacterial characteristic of AZ91 Mg alloy. Also, the alkali-treated sirolimus-loaded substrates (Mg/Na/S and Mg/Na/S/P) inhibit the valvular interstitial cell's growth significantly in in-vitro. Hence, the results imply that sirolimus-loaded PLGA-coated AZ91 Mg alloy-based substrate can be a potential candidate for cardiovascular stent application.

Functionalization of poly (lactic-co-glycolic acid) nano‑calcium sulphate and fucoidan 3D scaffold using human bone marrow mesenchymal stromal cells for bone tissue engineering application

This study aimed to functionalize a novel porous PLGA (Poly lactic-co-glycolic acid) composite scaffold in combination with nano‑calcium sulphate (nCS) and/or fucoidan (FU) to induce osteogenic differentiation of human bone marrow stromal cells. The composite scaffolds (PLGA-nCS-FU, PLGA-nCS or PLGA-FU) were fabricated and subjected to characterization using Fourier-transform infrared spectroscopy (FTIR), X-ray powder diffraction (XRD), Scanning electron microscopy (SEM) and Energy Dispersive X-Ray (EDX). The biocompatibility and osteogenic induction potential of scaffolds on seeded human bone marrow derived mesenchymal stromal cells (hBMSCs) were studied using cell attachment and alamar blue cell viability and alkaline phosphatase (ALP), osteocalcin and osteogenic gene expression, respectively. The composition of different groups was reflected in FTIR, XRD and EDX. The SEM micrographs revealed a difference in the surface of the scaffold before and after FU addition. The confocal imaging and SEM micrographs confirmed the attachment of cells onto all three composite scaffolds. However, the AB assay indicated a significant increase (p < 0.05) in cell viability/proliferation seeded on PLGA-nCS-FU on day 21 and 28 as compared with other combinations. A 2-fold significant increase (p < 0.05) in ALP and OC secretion of seeded hBMSCs onto PLGA-nCS-FU was observed when compared with other combinations. A significant increase in RUNX2, OPN, COL-I and ALP genes were observed in the cells seeded on PLGA-nCS-FU on day 14 and 28 as compared with day 0. In conclusion, the incorporation of both Fucoidan and Nano‑calcium sulphate with PLGA showed a promising improvement in the osteogenic potential of hBMSCs. Therefore, PLGA-nCS-FU could be the ideal candidate for subsequent pre-clinical studies to develop a successful bone substitute to repair critical bone defects.

Folic acid-chitosan functionalized polymeric nanocarriers to treat colon cancer

In the present study, polymeric nanoparticles loaded with IRI and quercetin, a p-gp inhibitor, were developed to target folate receptors expressed by colon cancer cells for oral targeted delivery. This work reports the development of PNPs with an entrapment efficiency of 41.26 ± 0.56 % for IRI and 55.83 ± 4.51 for QT. PNPs were further surface modified using chitosan-folic acid conjugates for better targetability to obtain folic acid-chitosan coated nanoparticles. DLS and FeSEM revealed particles in the nanometric size range with spherical morphology, while FTIR and DSC provided details on their structure and encapsulation. In vitro drug release studies confirmed a sustained release pattern of IRI and QT, while cell line studies confirmed the superiority of C-FA-PNPs when tested on Caco2 cells. Pharmacodynamic studies in colon cancer induced rats showed similar efficacy for PNPs and C-FA-PNPs. Further examination from a bio-distribution study in healthy rats, revealed the failure of C-FA-PNPs to deliver the drugs to the colon adequately, while the PNPs improved the available concentration of IRI at the colon by almost 1.8 folds when compared to the available marketed product. Hence, the developed PNP formulation sticks out as a plausible substitute for the intravenous dosage forms of IRI which have been conventionally prevailing.

Thymol-Modified Oleic and Linoleic Acids Encapsulated in Polymeric Nanoparticles: Enhanced Bioactivity, Stability, and Biomedical Potential

Unsaturated fatty acids, such as oleic acid (OA) and linoleic acid (LA), are promising antimicrobial and cytostatic agents. We modified OA and LA with thymol (TOA and TLA, respectively) to expand their bioavailability, stability, and possible applications, and encapsulated these derivatives in polymeric nanoparticles (TOA-NPs and TLA-NPs, respectively). Prior to synthesis, we performed mathematical simulations with PASS and ADMETlab 2.0 to predict the biological activity and pharmacokinetics of TOA and TLA. TOA and TLA were synthesized via esterification in the presence of catalysts. Next, we formulated nanoparticles using the single-emulsion solvent evaporation technique. We applied dynamic light scattering, Uv-vis spectroscopy, release studies under gastrointestinal (pH 1.2-6.8) and blood environment simulation conditions (pH 7.4), and in vitro biological activity testing to characterize the nanoparticles. PASS revealed that TOA and TLA have antimicrobial and anticancer therapeutic potential. ADMETlab 2.0 provided a rationale for TOA and TLA encapsulation. The nanoparticles had an average size of 212-227 nm, with a high encapsulation efficiency (71-93%), and released TOA and TLA in a gradual and prolonged mode. TLA-NPs possessed higher antibacterial activity against B. cereus and S. aureus and pronounced cytotoxic activity against MCF-7, K562, and A549 cell lines compared to TOA-NPs. Our findings expand the biomedical application of fatty acids and provide a basis for further in vivo evaluation of designed derivatives and formulations.

Sample transformation in online separations: how chemical conversion advances analytical technology

While the advent of modern analytical technology has allowed scientists to determine the complexity of mixtures, it also spurred the demand to understand these sophisticated mixtures better. Chemical transformation can be used to provide insights into properties of complex samples such as degradation pathways or molecular heterogeneity that are otherwise unaccessible. In this article, we explore how sample transformation is exploited across different application fields to empower analytical methods. Transformation mechanisms include molecular-weight reduction, controlled degradation, and derivatization. Both offline and online transformation methods have been explored. The covered studies show that sample transformation facilitates faster reactions (e.g. several hours to minutes), reduces sample complexity, unlocks new sample dimensions (e.g. functional groups), provides correlations between multiple sample dimensions, and improves detectability. The article highlights the state-of-the-art and future prospects, focusing in particular on the characterization of protein and nucleic-acid therapeutics, nanoparticles, synthetic polymers, and small molecules.

Effect of folic acid-linked chitosan-coated PLGA-based curcumin nanoparticles on the redox system of glioblastoma cancer cells

OBJECTIVES

Oxidative stress is one of the carcinogenic mechanisms underlying the development of glioblastoma multiforme (GBM), a highly aggressive brain tumor type associated with poor prognosis. Curcumin is known to be an efficient antioxidant, anti-inflammatory, and anticancer compound. However, its poor solubility in water, inappropriate pharmacokinetics, and low bioavailability limit its use as an antitumor drug. We prepared PLGA-based curcumin nanoparticles changed with folic acid and chitosan (curcumin-PLGA-CS-FA) and evaluated its effects on GBM tumor cells' redox status.

METHODS

The nanoprecipitation method was used to synthesize CU nanoparticles (CU-NPs). The size, morphology, and stability were characterized by DLS, SEM, and zeta potential analysis, respectively. The CU-NPs' toxic properties were studied by MTT assay and measuring the intracellular reactive oxygen species (ROS) and malondialdehyde (MDA) concentrations. The study was completed by measuring the gene expression levels and activity of superoxide dismutase, catalase, glutaredoxin, and thioredoxin antioxidant enzymes.

RESULTS

The size, polydispersity index, and zeta potential of CU-NPs were 77.27 nm, 0.29, and -22.45 mV, respectively. The encapsulation efficiency was approximately 98%. Intracellular ROS and MDA levels decreased after CU-NP treatment. Meanwhile, the CU-NPs increased gene expression and activity of superoxide dismutase, catalase, glutaredoxin, and thioredoxin antioxidant enzymes.

CONCLUSION

CU-NPs might be effective in the prevention and treatment of glioblastoma cancer by modulating the antioxidant-oxidant balance.

Development of a Polymeric Pharmacological Nanocarrier System as a Potential Therapy for Spinocerebellar Ataxia Type 7

Spinocerebellar ataxia type 7 (SCA7) is an autosomal-dominant inherited disease characterized by progressive ataxia and retinal degeneration. SCA7 belongs to a group of neurodegenerative diseases caused by an expanded CAG repeat in the disease-causing gene, resulting in aberrant polyglutamine (polyQ) protein synthesis. PolyQ ataxin-7 is prone to aggregate in intracellular inclusions, perturbing cellular processes leading to neuronal death in specific regions of the central nervous system (CNS). Currently, there is no treatment for SCA7; however, a promising approach successfully applied to other polyQ diseases involves the clearance of polyQ protein aggregates through pharmacological activation of autophagy. Nonetheless, the blood-brain barrier (BBB) poses a challenge for delivering drugs to the CNS, limiting treatment effectiveness. This study aimed to develop a polymeric nanocarrier system to deliver therapeutic agents across the BBB into the CNS. We prepared poly(lactic-co-glycolic acid) nanoparticles (NPs) modified with Poloxamer188 and loaded with rapamycin to enable NPs to activate autophagy. We demonstrated that these rapamycin-loaded NPs were successfully taken up by neuronal and glial cells, demonstrating high biocompatibility without adverse effects. Remarkably, rapamycin-loaded NPs effectively cleared mutant ataxin-7 aggregates in a SCA7 glial cell model, highlighting their potential as a therapeutic approach to fight SCA7 and other polyQ diseases.

PEGylated Chitosan Nanoparticles Loaded with Betaine and Nedaplatin Hamper Breast Cancer: In Vitro and In Vivo Studies

The current study investigates the anticancer effects of PEGylated chitosan nanoparticles (CS NPs) coloaded with betaine (BT) and nedaplatin (ND) on breast adenocarcinoma (MCF-7) cells and breast cancer-bearing rats. Hereof, the ionotropic gelation approach was implemented for the synthesis of PEG-uncoated and PEG-coated CS NPs encompassing either BT, ND, or both (BT-ND). The sizes of the developed BT/CS NPs, ND/CS NPs, and BT-ND/CS NPs were 176.84 ± 7.45, 204.1 ± 13.6, and 201.1 ± 23.35 nm, respectively. Meanwhile, the sizes of the synthesized BT/PEG-CS NPs, ND/PEG-CS NPs, and BT-ND/PEG-CS NPs were 165.1 ± 32.40, 148.2 ± 20.98, and 143.7 ± 7.72 nm, respectively. The surface charges of the fabricated nanoparticles were considerably high. All of the synthesized nanoparticles displayed a spherical form and significant entrapment efficiency. Release experiments demonstrated that the PEGylated and non-PEGylated CS NPs could discharge their contents into the tumor cells' microenvironments (pH 5.5). In addition, the NPs demonstrated an outstanding ability to reduce the viability of the MCF-7 cell line. In addition, BT-ND/PEG-CS NPs were found to be the strongest among all NP preparations, where they caused around 90% decrease in the size of mammary gland tumors in rats compared to vehicle-treated animals.

Physicochemical Properties and Release Study of Antimetabolite-Incorporated Stearoyl Chitosan

Stearoyl chitosan (SC), derived from the acylation of chitosan, contributes to the efficiency of drug delivery systems because of its structure, which accommodates the drug in a particle. Nonetheless, its role in chemotherapy has been largely unexplored. The present study involves the synthesis of stearoyl chitosan through the reaction of depolymerized chitosan with stearoyl chloride under mild reaction conditions. The resulting compound was subjected to structural analysis utilizing Fourier-transform infrared (FTIR) spectroscopy, 1H NMR, and X-ray diffraction (XRD) spectroscopy. The dispersion of SC molecules in phosphate-buffered saline (PBS) forms SC nanoparticles. The best dispersion of SC in the solution was achieved at a 1:60 chitosan-to-stearoyl chloride weight ratio. Three antimetabolite drugs, methotrexate, pemetrexed, and raltitrexed, were selected to examine the loading efficacy of SC. Pemetrexed had the highest drug-loading value of 36.8% among the three antimetabolites incorporated into SC, along with an encapsulation efficiency of 85.1%. The size of SC loaded with antimetabolites ranged from 225 to 369 nm, and their spherical form was verified via a transmission electron microscope. The in vitro release study showed that SC demonstrated controlled drug release, suggesting that SC nanoparticles have significant promise as a delivery strategy for chemotherapy.

Polymer-Based Nanoparticles as Drug Delivery Systems for Purines of Established Importance in Medicine

Many purine derivatives are active pharmaceutical ingredients of significant importance in the therapy of autoimmune diseases, cancers, and viral infections. In many cases, their medical use is limited due to unfavorable physicochemical and pharmacokinetic properties. These problems can be overcome by the preparation of the prodrugs of purines or by combining these compounds with nanoparticles. Herein, we aim to review the scientific progress and perspectives for polymer-based nanoparticles as drug delivery systems for purines. Polymeric nanoparticles turned out to have the potential to augment antiviral and antiproliferative effects of purine derivatives by specific binding to receptors (ASGR1-liver, macrophage mannose receptor), increase in drug retention (in eye, intestines, and vagina), and permeation (intranasal to brain delivery, PEPT1 transport of acyclovir). The most significant achievements of polymer-based nanoparticles as drug delivery systems for purines were found for tenofovir disoproxil in protection against HIV, for acyclovir against HSV, for 6-mercaptopurine in prolongation of mice ALL model life, as well as for 6-thioguanine for increased efficacy of adoptively transferred T cells. Moreover, nanocarriers were able to diminish the toxic effects of acyclovir, didanosine, cladribine, tenofovir, 6-mercaptopurine, and 6-thioguanine.

Bio-Inspired Nanomaterials for Micro/Nanodevices: A New Era in Biomedical Applications

Exploring bio-inspired nanomaterials (BINMs) and incorporating them into micro/nanodevices represent a significant development in biomedical applications. Nanomaterials, engineered to imitate biological structures and processes, exhibit distinctive attributes such as exceptional biocompatibility, multifunctionality, and unparalleled versatility. The utilization of BINMs demonstrates significant potential in diverse domains of biomedical micro/nanodevices, encompassing biosensors, targeted drug delivery systems, and advanced tissue engineering constructs. This article thoroughly examines the development and distinctive attributes of various BINMs, including those originating from proteins, DNA, and biomimetic polymers. Significant attention is directed toward incorporating these entities into micro/nanodevices and the subsequent biomedical ramifications that arise. This review explores biomimicry's structure-function correlations. Synthesis mosaics include bioprocesses, biomolecules, and natural structures. These nanomaterials' interfaces use biomimetic functionalization and geometric adaptations, transforming drug delivery, nanobiosensing, bio-inspired organ-on-chip systems, cancer-on-chip models, wound healing dressing mats, and antimicrobial surfaces. It provides an in-depth analysis of the existing challenges and proposes prospective strategies to improve the efficiency, performance, and reliability of these devices. Furthermore, this study offers a forward-thinking viewpoint highlighting potential avenues for future exploration and advancement. The objective is to effectively utilize and maximize the application of BINMs in the progression of biomedical micro/nanodevices, thereby propelling this rapidly developing field toward its promising future.

A pH-responsive bi-MIL-88B MOF coated with folic acid-conjugated chitosan as a promising nanocarrier for targeted drug delivery of 5-Fluorouracil

Cancer has remained one of the leading causes of death worldwide, with a lack of effective treatment. The intrinsic shortcomings of conventional therapeutics regarding tumor specificity and non-specific toxicity prompt us to look for alternative therapeutics to mitigate these limitations. In this regard, we developed multifunctional bimetallic (FeCo) bi-MIL-88B-FC MOFs modified with folic acid-conjugated chitosan (FC) as drug delivery systems (DDS) for targeted delivery of 5-Fluorouracil (5-FU). The bi-MIL-88B nanocarriers were characterized through various techniques, including powder X-ray diffraction, scanning electron microscopy, energy-dispersive X-ray, thermogravimetric analysis, and Fourier transform infrared spectroscopy. Interestingly, 5-FU@bi-MIL-88B-FC showed slower release of 5-FU due to a gated effect phenomenon endowed by FC surface coating compared to un-modified 5-FU@bi-MIL-88B. The pH-responsive drug release was observed, with 58% of the loaded 5-FU released in cancer cells mimicking pH (5.2) compared to only 24.9% released under physiological pH (5.4). The in vitro cytotoxicity and cellular internalization experiments revealed the superiority of 5-FU@bi-MIL-88B-FC as a highly potent targeted DDS against folate receptor (FR) positive SW480 cancer cells. Moreover, due to the presence of Fe and Co in the structure, bi-MIL-88B exhibited peroxidase-like activity for chemodynamic therapy. Based on the results, 5-FU@bi-MIL-88B-FC could serve as promising candidate for smart DDS by sustained drug release and selective targeting.

Imiquimod-Loaded Chitosan-Decorated Di-Block and Tri-Block Polymeric Nanoparticles Loaded In Situ Gel for the Management of Cervical Cancer

BACKGROUND

Cervical intraepithelial neoplasia, the predisposing factor for cervical cancer (CC), is caused by human papillomavirus (HPV) infection and can be treated with imiquimod (IMQ). However, poor water solubility and side effects such as local inflammation can render IMQ ineffective. The aim of this study is to design a prolonged release nano system in combination with mucoadhesive-thermosensitive properties for an effective vaginal drug delivery.

METHODS

Polylactic-co-glycolic acid (PLGA), polycaprolactone (PCL), poly lactide-co-caprolactone (PLA-PCL), and poly L-lactide-co-caprolactone-co-glycolide (PLGA-PCL) were used to create IMQ nanoparticles. Chitosan (CS) was then added to the surfaces of the IMQ NPs for its mucoadhesive properties. The NPs were then incorporated into poloxamer hydrogels. The NPs' size and morphology, encapsulation efficiency (EE), in vitro drug release, gel characterization, ex vivo drug permeation, and in vitro safety and efficacy were characterized.

RESULTS

Two batches of NPs were prepared, IMQ NPs and CS-coated NPs (CS-IMQ NPs). In general, both types of NPs were uniformly spherical in shape with average particle sizes of 237.3 ± 4.7 and 278.2 ± 5.4 nm and EE% of 61.48 ± 5.19% and 37.73 ± 2.88 for IMQ NPs and CS-IMQ NPs, respectively. Both systems showed prolonged drug release of about 80 and 70% for IMQ NPs and CS-IMQ NPs, respectively, within 48 h. The gelation temperatures for the IMQ NPs and CS-IMQ NPs were 30 and 32 °C, respectively; thus, suitable for vaginal application. Although ex vivo permeability showed that CS-IMQ NPs showed superior penetration compared to IMQ NPs, both systems enhanced drug penetration (283 and 462 µg/cm2 for IMQ NPs and CS-IMQ NPs, respectively) relative to the control (60 µg/cm2). Both systems reduced the viability of cervical cancer cells, with a minimal effect of the normal vaginal epithelium. However, IMQ NPs exhibited a more pronounced cytotoxic effect. Both systems were able to reduce the production of inflammatory cytokines by at least 25% in comparison to free IMQ.

CONCLUSION

IMQ and CS-IMQ NP in situ gels enhanced stability and drug release, and improved IMQ penetration through the vaginal tissues. Additionally, the new systems were able to increase the cytotoxic effect of IMQ against CC cells with a reduction in inflammatory responses. Thus, we believe that these systems could be a good alternative to commercial IMQ systems for the management of CC.

Cytotoxic Effects of Castalin Nanoparticles Against Osteosarcoma

The size-dependent bioactivities of castalin were analyzed by comparing the cytotoxic effects of native castalin and castalin nanoparticles on osteosarcoma in vitro and in vivo. In vitro experiments indicated that castalin nanoparticles induced apoptosis of an osteosarcoma cell line more efficiently than native castalin. The more potent effects of castalin nanoparticles, relative to native castalin, were confirmed in vivo using a xenograft osteosarcoma model. Caco-2 cell transport studies showed that permeation of castalin nanoparticles was higher than native castalin. The higher bioactivity and superior bioavailability of castalin nanoparticles could potentially be utilised to develop novel therapies for osteosarcoma.

Enhance the oral insulin delivery route using a modified chitosan-based formulation fabricated by microwave

Chitosan (Cs) was subjected to ball milling and subsequently functionalized with Dinitro salicylic acid (Cs-DNS) to enhance the efficacy of oral insulin delivery. The hydrodynamic spherical particle sizes exhibited 33.29 ± 5.08 nm for modified Cs-DNS NPs. Irrespective of insulin entrapment, zeta potential measurements revealed positively charged Cs-DNS NPs (+ 35 ± 3.5 mV). The entrapment performance (EP%) was evaluated in vitro, and insulin release patterns at various pH levels. The EP% for Cs-DNS NPs was 99.3 ± 1.6. Cs- DNS NPs retained a considerable amount of insulin (92 %) in an acidic medium, and significant quantities were released at increasing pH values over time. In vivo investigations, the diabetic rats which taken insulin-incorporated NPs had lower serum glucose levels (SGL) after 3 h to (39.4 ± 0.6 %) for Cs- DNS NPs. For insulin-incorporated Cs- DNS NPs, the bioavailability (BA%) and pharmacological availability (PA%) were 17.5 ± 0.31 % and 8.6 ± 0.8 %, respectively. The assertion above highlights the significance and effectiveness of modified chitosan in promoting insulin delivery, decreasing SGL levels, and guaranteeing safety.

Amelioration of Cancer Employing Chitosan, Its Derivatives, and Chitosan-Based Nanoparticles: Recent Updates

The limitations associated with the conventional treatment of cancer have necessitated the design and development of novel drug delivery systems based mainly on nanotechnology. These novel drug delivery systems include various kinds of nanoparticles, such as polymeric nanoparticles, solid lipid nanoparticles, nanostructured lipid carriers, hydrogels, and polymeric micelles. Among the various kinds of novel drug delivery systems, chitosan-based nanoparticles have attracted the attention of researchers to treat cancer. Chitosan is a polycationic polymer generated from chitin with various characteristics such as biocompatibility, biodegradability, non-toxicity, and mucoadhesiveness, making it an ideal polymer to fabricate drug delivery systems. However, chitosan is poorly soluble in water and soluble in acidic aqueous solutions. Furthermore, owing to the presence of reactive amino groups, chitosan can be chemically modified to improve its physiochemical properties. Chitosan and its modified derivatives can be employed to fabricate nanoparticles, which are used most frequently in the pharmaceutical sector due to their possession of various characteristics such as nanosize, appropriate pharmacokinetic and pharmacodynamic properties, non-immunogenicity, improved stability, and improved drug loading capacity. Furthermore, it is capable of delivering nucleic acids, chemotherapeutic medicines, and bioactives using modified chitosan. Chitosan and its modified derivative-based nanoparticles can be targeted to specific cancer sites via active and passive mechanisms. Based on chitosan drug delivery systems, many anticancer drugs now have better effectiveness, potency, cytotoxicity, or biocompatibility. The characteristics of chitosan and its chemically tailored derivatives, as well as their use in cancer therapy, will be examined in this review.

Smart chitosan-PLGA nanocarriers functionalized with surface folic acid ligands against lung cancer cells

Lung cancer is the second most prevalent and first killer cancer worldwide, and conventional approaches do not have enough ability to suppress it. Therefore, a novel targeted chitosan (CS)-poly lactic-co-glycolic acid (PLGA)-folic acid (FA) nanocarrier was developed for delivery of sorafenib (Sor) to lung cancer cells. The nanocarrier (CPSF) had a size of 30-40 nm with globular shapes. Surface charge and drug content of CPSF were ascertained at about 1.1 mV and 15 %, respectively. Controlled (4 % within 2 h) and pH-sensitive (18 % within 2 h at pH = 5.0) Sor release were observed for the nanocarrier. The MTT assay demonstrated a cell viability of 13 % after 24 h treatment with 400 nM CPSF in A549 cancer cells while it was 78 % in MSC normal cells. The qRT-PCR revealed >8 folds and 11 folds increase for Caspase9 and P53 genes after 5 h treatment with 100 nM (IC₅₀) CPSF; but a reduction of 5 folds was observed for the Bcl2 gene. Besides, 57 % and 20 % apoptosis were attained in cell cycle arrest and apoptosis assays for CPSF, respectively. CPF indicated about 88 % internalization in cancer cells. These data prove that CPSF is a promising nanodelivery system for lung cancer suppression.

Nano delivery system for paclitaxel: Recent advances in cancer theranostics

Paclitaxel is one of the most effective chemotherapeutic drugs which processes the obvious curative effect for a broad range of cancers including breast, ovarian, lung, and head & neck cancers. Though some novel paclitaxel-loaded formulations have been developed, the clinical application of the paclitaxel is still limited due to its toxicity and solubility issues. Over the past decades, we have seen rapid advances in applying nanocarriers in paclitaxel delivery systems. The nano-drug delivery systems offer unique advantages in enhancing the aqueous solubility, reducing side effects, increasing permeability, prolonging circulation half-life of paclitaxel. In this review, we summarize recent advances in developing novel paclitaxel-loaded nano delivery systems based on nanocarriers. These nanocarriers show great potentials in overcoming the disadvantages of pure paclitaxel and as a result improving the efficacy.

Modeling of Chitosan modified PLGA atorvastatin-curcumin conjugate (AT-CU) nanoparticles, overcoming the barriers associated with PLGA: an approach for better management of atherosclerosis

Conjugate drugs are evolving into potent techniques in the drug development process for enhancing the biopharmaceutical, physicochemical, and pharmacokinetic properties. Atorvastatin (AT) is the first line of treatment for coronary atherosclerosis; however its therapeutic efficacy is limited because of its poor solubility and fast pass metabolism. Curcumin (CU) is evidenced in several crucial signaling pathways linked to lipid regulation and inflammation. To enhance the therapeutic efficacy and physical properties of AT and CU, a new conjugate derivative (AT-CU) was synthesized and assessed by in silico, in vitro characterizations, and in vivo efficacy through mice model. Although the biocompatibility and biodegradability of Polylactic-co-Glycolic Acid (PLGA) in nanoparticles are well documented, burst release is a common issue with this polymer. Hence the current work used chitosan as a drug release modifier to the PLGA nanoparticles. The chitosan-modified PLGA AT-CU nanoparticles were prepaid by single emulsion and solvent evaporation technique. With raising the concentration of chitosan the particle size grew from 139.2 nm to 197.7 nm, the zeta potential rose from -20.57 mV to 28.32 mV, and the drug encapsulation efficiency improved from 71.81 % to 90.57 %. At 18 hours, the burst release of AT-CU from PLGA nanoparticles was seen, hitting abruptly 70.8%. For chitosan-modified PLGA nanoparticles, the burst release pattern was significantly reduced which could be due to the adsorption of the drug on the surface of chitosan. The efficiency of the ideal formulation i.e F4 (chitosan/PLGA= 0.4) in treating atherosclerosis was further strongly evidenced by in vivo investigation.

Hydrophobic Modification of Poly(γ-glutamic acid) by Grafting 4-Phenyl-butyl Side Groups for the Encapsulation and Release of Doxorubicin

The delivery of drugs is a great challenge, since most of active pharmaceutical ingredients developed today are hydrophobic and poorly water soluble. From this perspective, drug encapsulation on biodegradable and biocompatible polymers can surpass this problem. Poly(γ-glutamic acid) (PGGA), a bioedible and biocompatible polymer has been chosen for this purpose. Carboxylic side groups of PGGA have been partially esterified with 4-phenyl-butyl bromide, producing a series of aliphatic-aromatic ester derivatives with different hydrophilic-lipophilic balances. Using nanoprecipitation or emulsion/evaporation methods, these copolymers were self-assembled in a water solution, forming nanoparticles with average diameters between 89 and 374 nm and zeta potential values between -13.1 and -49.5 mV. The hydrophobic core containing 4-phenyl-butyl side groups was used for the encapsulation of an anticancer drug, such as Doxorubicin (DOX). The highest encapsulation efficiency was reached for a copolymer derived from PGGA, with a 46 mol% degree of esterification. Drug release studies carried out for 5 days at different pHs (4.2 and 7.4) indicated that DOX was released faster at pH 4.2, revealing the potential of these nanoparticles as chemotherapy agents.

Design of Chitosan-Coated, Quercetin-Loaded PLGA Nanoparticles for Enhanced PSMA-Specific Activity on LnCap Prostate Cancer Cells

Nanoparticles are designed to entrap drugs at a high concentration, escape clearance by the immune system, be selectively taken up by cancer cells, and release bioactives in a rate-modulated manner. In this study, quercetin-loaded PLGA nanoparticles were prepared and optimized to determine whether coating with chitosan would increase the cellular uptake of the nanoparticles and if the targeting ability of folic acid as a ligand can provide selective toxicity and enhanced uptake in model LnCap prostate cancer cells, which express high levels of the receptor prostate-specific membrane antigen (PSMA), compared to PC-3 cells, that have relatively low PSMA expression. A design of experiments approach was used to optimize the PLGA nanoparticles to have the maximum quercetin loading, optimal cationic charge, and folic acid coating. We examined the in vitro release of quercetin and comparative cytotoxicity and cellular uptake of the optimized PLGA nanoparticles and revealed that the targeted nano-system provided sustained, pH-dependent quercetin release, and higher cytotoxicity and cellular uptake, compared to the non-targeted nano-system on LnCap cells. There was no significant difference in the cytotoxicity or cellular uptake between the targeted and non-targeted nano-systems on PC-3 cells (featured by low levels of PSMA), pointing to a PSMA-specific mechanism of action of the targeted nano-system. The findings suggest that the nano-system can be used as an efficient nanocarrier for the targeted delivery and release of quercetin (and other similar chemotherapeutics) against prostate cancer cells.

An ellagitannin-loaded CS-PEG decorated PLGA nano-prototype promotes cell cycle arrest in colorectal cancer cells

Colorectal cancer is associated with significant morbidity and mortality worldwide. Egypt, as a developing country, has a high-rise incidence of cancer. The current study objective was to investigate the antitumor influences of ellagitannin-loaded CS-PEG-decorated PLGA nano-prototypes against human colorectal cancer cell lines (HCT 116 as well as Caco-2) in vitro. Doxorubicin (DOX), punicalin (PN), and punicalagin (PNG)-encapsulated chitosan-polyethylene glycol-decorated PLGA (PLGA-CS-PEG) nanoparticles (NPs) were described. The cytotoxicity of each preparation was evaluated using MTT assays in HCT 116 as well as Caco-2 cells during G0, G1, S, and G2 cell cycle phases. Cell cycle-related gene expression and protein levels were measured after treatment. Reactive oxygen species (ROS) levels were also measured. Both PN and PNG PLGA-CS-PEG NPs induce colon cancer cell death with cell cycle arrest in the G1 phase in vitro. Caco-2 cells were more sensitive to the nano-therapy than HCT 116 cells. Upon treatment, the ratio of Bax to Bcl-2 expression was increased following nano-therapy, with increased levels of Cas-3 and decreased expression of Bcl-2, PI3k, and NF-ĸB compared to control. The nitric oxide level (NO), a marker of ROS, was increased following nano-therapy compared to control. In conclusion, ROS-mediated cell cycle arrest can be induced by PN as well as PNG nano-therapy in cell lines of colorectal cancer.

Multifunctional Nanoparticles and Nanopesticides in Agricultural Application

The unscientific application of pesticides can easily cause a series of ecological environmental safety issues, which seriously restrict the sustainable development of modern agriculture. The great progress in nanotechnology has allowed the continuous development of plant protection strategies. The nanonization and delivery of pesticides offer many advantages, including their greater absorption and conduction by plants, improved efficacy, reduced dosage, delayed resistance, reduced residues, and protection from natural enemies and beneficial insects. In this review, we focus on the recent advances in multifunctional nanoparticles and nanopesticides. The definition of nanopesticides, the types of nanoparticles used in agriculture and their specific synergistic mechanisms are introduced, their safety is evaluated, and their future application prospects, about which the public is concerned, are examined.

Cationic Nanoparticle-Stabilized Vaccine Delivery System for the H9N2 Vaccine to Promote Immune Response in Chickens

Chinese yam polysaccharides (CYPs) have received wide attention for their immunomodulatory activity. Our previous studies had discovered that the Chinese yam polysaccharide PLGA-stabilized Pickering emulsion (CYP-PPAS) can serve as an efficient adjuvant to trigger powerful humoral and cellular immunity. Recently, positively charged nano-adjuvants are easily taken up by antigen-presenting cells, potentially resulting in lysosomal escape, the promotion of antigen cross-presentation, and the induction of CD8 T-cell response. However, reports on the practical application of cationic Pickering emulsions as adjuvants are very limited. Considering the economic damage and public-health risks caused by the H9N2 influenza virus, it is urgent to develop an effective adjuvant for boosting humoral and cellular immunity against influenza virus infection. Here, we applied polyethyleneimine-modified Chinese yam polysaccharide PLGA nanoparticles as particle stabilizers and squalene as the oil core to fabricate a positively charged nanoparticle-stabilized Pickering emulsion adjuvant system (PEI-CYP-PPAS). The cationic Pickering emulsion of PEI-CYP-PPAS was utilized as an adjuvant for the H9N2 Avian influenza vaccine, and the adjuvant activity was compared with the Pickering emulsion of CYP-PPAS and the commercial adjuvant (aluminum adjuvant). The PEI-CYP-PPAS, with a size of about 1164.66 nm and a ζ potential of 33.23 mV, could increase the H9N2 antigen loading efficiency by 83.99%. After vaccination with Pickering emulsions based on H9N2 vaccines, PEI-CYP-PPAS generated higher HI titers and stronger IgG antibodies than CYP-PPAS and Alum and increased the immune organ index of the spleen and bursa of Fabricius without immune organ injury. Moreover, treatment with PEI-CYP-PPAS/H9N2 induced CD4⁺ and CD8⁺ T-cell activation, a high lymphocyte proliferation index, and increased cytokine expression of IL-4, IL-6, and IFN-γ. Thus, compared with the CYP-PPAS and aluminum adjuvant, the cationic nanoparticle-stabilized vaccine delivery system of PEI-CYP-PPAS was an effective adjuvant for H9N2 vaccination to elicit powerful humoral and cellular immune responses.

Accelerating bone regeneration using poly(lactic-co-glycolic acid)/hydroxyapatite scaffolds containing duck feet-derived collagen

Collagen, with low antigenicity and excellent cell adhesion, is a biomaterial mainly used for regenerating bone, cartilage, and skin, owing to its biocompatibility and biodegradability. Results from a previous study confirmed that a scaffold mixed with duck feet-derived collagen (DC) and Poly(lactic-co-glycolic acid) (PLGA) reduced inflammatory reaction and increased bone regeneration. To develop an optimal bone substitute we included hydroxyapatite (HAp), a key osteoconductive material, in a DC and PLGA mixture. We fabricated 0, 10, 20, 40, 60, and 80 wt% DC/PLGA/HAp scaffolds and studied their potential for bone tissue engineering. Characteristic analysis of the scaffold and seeding of rabbit bone marrow mesenchymal stem cells (rBMSCs) on the scaffold were conducted to investigate cell proliferation, osteogenic differentiation, and bone formation. We confirmed that increasing DC concentration not only improved the compressive strength of the DC/PLGA/HAp scaffold but also cell proliferation and osteogenic differentiation. It was found through comparison with previous studies that including HAp in the scaffold also promotes osteogenic differentiation. Our study thus shows through in vivo results that the 80 wt% DC/PLGA/HAp scaffold promotes bone mineralization and collagen deposition while reducing the inflammatory response. Hence, 80 wt% DC/PLGA/HAp has excellent potential as a biomaterial for bone regeneration applications.

Enhanced Tumor Accumulation of Low-Molecular-Weight Hyaluronic Acid/Chitosan Nanocomplexes for Photothermal Therapy

Targeted phototheranostic nanosystems involving both cancer-specific near-infrared (NIR) fluorescence imaging and NIR light-induced phototherapy have shown great potential to improve cancer detection and treatment. In this study, a bifunctional nanocomplex based on low-molecular-weight hyaluronic acid (LMW-HA) and chitosan oligosaccharide lactate (COL) conjugating a zwitterionic NIR dye (ZW800-1) was rationally designed and prepared, and it was simultaneously used to enhance tumor accumulation and photothermal therapy (PTT). When HA-COL-ZW nanocomplexes were intravenously injected into mice bearing NCI-H460 tumors, HA-COL-ZW revealed increased tumor accumulation with prolonged tumor retention. Moreover, the ZW800-1 incorporated in HA-COL-ZW nanocomplexes showed excellent capability to convert NIR light into heat energy at the tumor site, acting as a PTT agent. Therefore, the targeted phototherapeutic HA-COL-ZW nanocomplex is a biocompatible and effective photothermal nanoagent, which could be a good candidate for future clinical use.

PLGA Particles in Immunotherapy

Poly(lactic-co-glycolic acid) (PLGA) particles are a widely used and extensively studied drug delivery system. The favorable properties of PLGA such as good bioavailability, controlled release, and an excellent safety profile due to the biodegradable polymer backbone qualified PLGA particles for approval by the authorities for the application as a drug delivery platform in humas. In recent years, immunotherapy has been established as a potent treatment option for a variety of diseases. However, immunomodulating drugs rely on targeted delivery to specific immune cell subsets and are often rapidly eliminated from the system. Loading of PLGA particles with drugs for immunotherapy can protect the therapeutic compounds from premature degradation, direct the drug delivery to specific tissues or cells, and ensure sustained and controlled drug release. These properties present PLGA particles as an ideal platform for immunotherapy. Here, we review recent advances of particulate PLGA delivery systems in the application for immunotherapy in the fields of allergy, autoimmunity, infectious diseases, and cancer.

Chitosan Surface-Modified PLGA Nanoparticles Loaded with Cranberry Powder Extract as a Potential Oral Delivery Platform for Targeting Colon Cancer Cells

Nutraceutical cranberry powder extract (CBPE) has distinct polyphenols inhibiting colon cancer growth and proliferation. However, its oral therapeutic efficacy is hindered because of its low permeability. This study aims to formulate chitosan surface-modified PLGA nanoparticles (CS-PLGA NPs) for encapsulating CBPE and modulating its release rate, permeation, cell targeting, and, therefore, its cytotoxicity. A full 2³ factorial design is employed to scrutinize the effect of lactide/glycolide ratio, PLGA weight, and stabilizer concentrations on entrapment efficiency percentage (EE%), particle size (PS), polydispersity index (PDI), and zeta potential (ZP). The optimum formula (F4) shows spherical particles with a relatively high EE% (72.30 ± 2.86%), an appropriate size of 370.10 ± 10.31 nm, PDI; 0.398 ± 0.001, and ZP; -5.40 ± 0.21 mV. Alongside the ATR-FTIR outcomes, the chitosan surface-modified formula (CS-F4) demonstrates a significant increase in particle size (417.67 ± 6.77 nm) and a shift from negative to positive zeta potential (+21.63 ± 2.46 mV), confirming the efficiency of surface modification with chitosan. The intestinal permeability of F4 and CS-F4 is significantly increased by 2.19- and 3.10-fold, respectively, compared to the CBPE solution, with the permeability coefficient (P_app) being 2.05 × 10^-4 cm/min and 2.91 × 10^-4 cm/min, for F4 and CS-F4, respectively, compared to the CBPE solution, 9.36 × 10^-5 cm/min. Moreover, CS-F4 evidences significant caspase-3 protein level expression stimulation and significant inhibition of vascular endothelial growth factor (VEGF) and signal transducer and activator of transcription-3 (STAT-3) protein expression levels, confirming the superiority of CS-F4 for targeting HT-29 cells. Briefly, CS-PLGA NPs could be regarded as a prosperous delivery system of CBPE with enhanced permeation, cell targeting, and antitumor efficacy.

Coating of chitosan on poly D,L-lactic-co-glycolic acid thymoquinone nanoparticles enhances the anti-tumor activity in triple-negative breast cancer

Breast cancer is the second most common cancer around the world. Triple-negative breast cancer (TNBC) is characterized by the absence of three receptors: progesterone, estrogen, and human epidermal growth factor-2 receptor (HER2). Various synthetic chemotherapies have gained attention but they caused unwanted side effects. Therefore, some secondary therapies are now becoming famous against this disease. For instance, natural compounds have been extensively researched against many diseases. However, enzymatic degradation and low solubility remain a major concern. To combat these issues, various nanoparticles have been synthesized and optimized from time to time, which increases its solubility and hence therapeutic potential of a particular drug increases. In this study, we have synthesized Poly D,L-lactic-co-glycolic acid (PLGA) loaded thymoquinone (TQ) nanoparticle (PLGA-TQ-NPs) and then coated them by chitosan (CS) (PLGA-CS-TQ-NPs), which was characterized by different methods. Size of non-coated NPs was 105 nm with PDI value of 0.3 and the size of coated NPs was 125 nm with PDI value of 0.4. Encapsulation efficiency (EE%) and Drug loading (DL%) was found to be 70.5 ± 2.33 and 3.38 for non-coated and 82.3 ± 3.11 and 2.66 for coated NPs respectively. We have also analysed their cell viability against MDA-MB-231 and SUM-149 TNBC cell lines. The resultant, nanoformulations exhibit anti-cancerous activity in a dose and time-dependent manner for MDA-MB-231 and SUM-149 cell lines with an IC₅₀ value of (10.31 ± 1.15, 15.60 ± 1.25, 28.01 ± 1.24) and (23.54 ± 1.24, 22.37 ± 1.25, 35 ± 1.27) for TQ free, PLGA-TQ-NPs and PLGA-CS-TQ-NPs respectively. For the first time, we have developed a nanoformulations of PLGA loaded TQ coated with CS NPs (PLGA-CS-TQ-NPs) against TNBC which led to their enhanced anti-cancerous effects.

Targeted delivery and anticancer effects of Chrysin-loaded chitosan-folic acid coated solid lipid nanoparticles in pancreatic malignant cells

The aim of this survey was to load Chrysin (CHY) on solid lipid nanoparticles (SLNs) and decorate the nanoparticles with folate-bound chitosan to increase the effectiveness of the treatment. CHY-SCF-NPs were synthesized by homogenizing and sonication methods and characterized. FA binding and encapsulation efficiency (HPLC), antioxidant capacity (ABTS and DPPH), cell viability assay (MTT), programmed cell death analysis (fluorescence staining, flow cytometry, and qPCR), and angiogenesis (CAM and molecular analysis) assay were done for assessment of therapeutic efficiency of CHY-SCF-NPs. Increases in size and change in surface charge of CHY-SLNs (PS: 84.3 nm and ZP: -18 mV) were reported after coating with folate-bound chitosan (PS: 125 nm and ZP: +34.9 mV). CHY-SCF-NPs inhibited PANC, MCF-7, A2780, and HepG2 as malignant cells and HFF as normal cells with IC₅₀∼53, 55, 249, and >250 µg/mL, respectively. Also, CHY-SCF-NPs scavenged ABTS (IC₅₀: 123.73 µg/mL), and DPPH (IC₅₀: 108.7 µg/mL) free radicals and suppressed angiogenesis in the CAM and qPCR assays. Up-regulation of Bax and caspase 9 genes as well as the fluorescence staining and cell cycle results confirmed the pro-apoptotic properties of CHY-SCF-NPs. CHY-SCF-NPs can be considered a promising anti-cancer candidate for preclinical and clinical studies of pancreatic cancer.

Gamma oryzanol loaded into micelle-core/chitosan-shell: from translational nephroprotective potential to emphasis on sirtuin-1 associated machineries

Gamma oryzanol (ORZ) is a nutraceutical that is poorly water soluble with poor intestinal absorption. In the current work, ORZ was nanoformulated into uncoated and chitosan coated micelles based on methoxy-poly(ethylene glycol)-b-poly(ε-caprolactone) (mPEG-PCL) and poly(ε-caprolactone)-b-methoxy-poly(ethylene glycol)-b-poly(ε-caprolactone) (PCL-PEG-PCL) copolymers for augmenting ORZ oral delivery. The physicochemical properties, morphological study, in-vitro release and safety of the nanoplaforms were determined. Importantly, the nephroprotective competence of the nanoplaforms was analyzed against acute kidney injury (AKI) rat model and the sirtuin-1 associated machineries were assessed. The results revealed that the micelles exerted particle size (PS) from 97.9 to 117.8 nm that was markedly increased after chitosan coating. The reversal of zeta potential from negative to highly positive further confirmed efficient coating. In vitro release profiles demonstrated prolonged release pattern. The nanoforms conferred higher cell viability values than free ORZ on Vero cell line. The designed micelles displayed augmented nephroprotection compared to free ORZ with the supremacy of CS coated micelles over uncoated ones in restoring kidney parameters to normal levels. The attenuated AKI was fulfilled via the modulation of sirtuin-1 signaling pathways translated by restoring the histological features, increasing renal antioxidant states, renal autophagy and decreasing renal inflammation and renal apoptosis. These outcomes confirmed that surface modification with chitosan had a considerable leverage on micelles safety, release behavior and in vivo performance.

Nano-Formulation of Antioxidants as Effective Inhibitors of γD-Crystallin Aggregation

The aggregation of crystallin proteins is related to cataracts and age-related macular degeneration. Apart from surgical replacement of the cataract lens, no other alternative treatment is available till date for this ailment. In the current work, we carried out an in-depth investigation of the effect of polyphenol-loaded nano-formulations on the aggregation of γD-crystallin. At first, the protein was allowed to form amorphous aggregates under denaturing conditions. Several polyphenols were then tried to inhibit the aggregation of the protein. Among the polyphenols tested, resveratrol and quercetin were found to be the most effective. Since polyphenols are prone to degradation, they were encapsulated in chitosan nanoparticles in order to provide ambient conditions for them to function effectively. The loading efficiency and polyphenol release kinetics were subsequently tested. Finally, the efficacy of resveratrol/quercetin-loaded chitosan nano-particles as inhibitors of γD-crystallin aggregation was confirmed in a series of experiments demonstrating the potency of the system in the prospective therapeutic intervention of eye ailments concerning self-assembly of γD-crystallin proteins.

Process intensified synthesis of luminescent poly(9,9-dioctylfluorene-alt-benzothiadiazole) and polyvinyl alcohol based shape memory polymeric nanocomposite sensors toward cold chain logistics information monitoring

Luminescent shape memory polymeric nanocomposite sensors prepared using poly(9,9-dioctylfluorene-alt-benzothiadiazole) and polyvinyl alcohol for cold chain logistics information monitoring.