Silver Nanoparticles for Water Pollution Monitoring and Treatments: Ecosafety Challenge and Cellulose-Based Hybrids Solution

Green Synthesis and Characterization of Biologically Synthesized and Antibiotic-Conjugated Silver Nanoparticles followed by Post-Synthesis Assessment for Antibacterial and Antioxidant Applications

The paper presents the antibacterial and antioxidant activities of silver nanoparticles (AgNPs) when conjugated with two antibiotics levofloxacin and ciprofloxacin as well as biologically synthesized nanoparticles from Moringa oleifera and Curcuma longa. Leaves of Moringa and powder of Curcuma were used in the green synthesis of silver nanoparticles. Ultraviolet-visible spectroscopy (UV), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) were used for the characterization of the synthesized silver nanoparticles. Comparison of levofloxacin and ciprofloxacin and their conjugated AgNPs was also studied for antibacterial and antioxidant activity. The synthesis of Moringa-AgNPs, turmeric-AgNPs, levofloxacin-AgNPs, and ciprofloxacin-AgNPs was confirmed by UV spectroscopy. An absorption peak value of 400-450 nm was observed, and light to dark brown color indicated the synthesis of AgNPs. Moringa-AgNPs revealed high antioxidant activity (80.3 ± 3.14) among all of the synthesized AgNPs. Lev-AgNPs displayed the highest zone of inhibition for Staphylococcus aureus, while in Escherichia coli, Cip-AgNPs showed high antibacterial activity. Furthermore, AgNPs synthesized using green methods exhibit high and efficient antimicrobial activities against two food-borne pathogens. Biologically synthesized nanoparticles exhibited antibacterial activity against E. coli (13.73 ± 0.46 with Tur-AgNPs and 13.53 ± 0.32 with Mor-AgNPs) and S. aureus (14.16 ± 0.24 with Tur-AgNPs and 13.36 ± 0.77 with Mor-AgNPs) by using a well diffusion method with significant shrinkage and damage of the bacterial cell wall, whereas antibiotic-conjugated nanoparticles showed high antibacterial activity compared to biologically synthesized nanoparticles with 14.4 ± 0.37 for Cip-AgNPs and 13.93 ± 0.2 for Lev-AgNPs for E. coli and 13.3 ± 0.43 for Cip-AgNPs and 14.33 ± 0.12 for Lev-AgNPs for S. aureus. The enhanced efficiency of conjugated silver nanoparticles is attributed to their increased surface area compared to larger particles. Conjugation of different functional groups contributes to improved reactivity, creating active sites for catalytic reactions. Additionally, the precise control over the size and shape of green-synthesized nanoparticles further augments their catalytic and antibiotic activities.

Nanoremediation and Antioxidant Potential of Biogenic Silver Nanoparticles Synthesized Using Leucena's Leaves, Stem, and Fruits

Synthetic dyes are persistent organic environmental pollutants that can cause extensive damage to living beings and to the ecosystem as a whole. Cost-effective, sustainable, and efficient strategies to deal with this type of pollution are necessary as it commonly resists conventional water treatment methods. Silver nanoparticles (AgNPs) synthesized using the aqueous extract from the leaves, stem, and fruits of Leucaena leucocephala (Leucena) were produced and characterized through UV-vis, TEM, EDS, SDL, XPS, XRD, and zeta potential, and they proved to be able to promote adsorption to remediate methylene blue and tartrazine pollution in water. The nanoremediation was performed and did not require direct exposure to sunlight or any special lamp or a specific reduction agent. The AgNPs produced using the extract from the leaves exhibited the best performance in nanoremediation and also presented antioxidant activity that surpassed the one from butylated hydroxytoluene (BHT). Consequently, it is an interesting nanotool to use in dye nanoremediation and/or as an antioxidant nanostructure.

Silver nanoparticles in plant health: Physiological response to phytotoxicity and oxidative stress

Silver nanoparticles (AgNPs) have gained significant attention in various fields due to their unique properties, but their release into the environment has raised concerns about their environmental and biological impacts. Silver nanoparticles can enter plants following their exposure to roots or via stomata following foliar exposure. Upon penetrating the plant cells, AgNPs interact with cellular components and alter physiological and biochemical processes. One of the key concerns associated with plant exposure to AgNPs is the potential of these materials to induce oxidative stress. Silver nanoparticles can also suppress plant growth and development by disrupting essential plant physiological processes, such as photosynthesis, nutrient uptake, water transport, and hormonal regulation. In crop plants, these disruptions may, in turn, affect the productivity and quality of the harvested components and therefore represent a potential threat to agricultural productivity and ecosystem stability. Understanding the phytotoxic effects of AgNPs is crucial for assessing their environmental implications and guiding the development of safe nanomaterials. By delving into the phytotoxic effects of AgNPs, this review contributes to the existing knowledge regarding their environmental risks and promotes the advancement of sustainable nanotechnological practices.

Anti-oncogenic Potential and Inflammation Modulatory Response of Green Synthesized Biocompatible Silver Nanoparticles

This study presents a novel approach to synthesizing silver nanoparticles (Ag NPs) using a solution combustion synthesis (SCS) method with Catharanthus roseus (C. roseus) leaf extract. The NPs were thoroughly characterized through X-ray diffraction (XRD), Scanning electron microscopy (SEM), Energy dispersive X-ray (EDX), Transmission electron microscopy (TEM), and Selected area electron diffraction (SAED), elucidating their crystal structure. Notably, the synthesized Ag NPs exhibited a significant dose-dependent decline in viability of the MDA-MB 231 breast cancer cell line, with an IC50 value of 13.3 μg/mL, underscoring their potential as potent anticancer agent. Beyond cytotoxicity, the study pioneers an investigation into the biocompatibility of Ag NPs by blood hemolsysis, providing critical insights into their safety and biomedical applicability. Furthermore, this research uncovers a distinctive facet of Ag NPs, revealing their inhibitory effects on the inflammatory enzyme secretory phospholipase A2 (sPLA2), a recognized biomarker for breast cancer. The demonstrated in vitro and in vivo inhibition of sPLA2 highlights the multifaceted potential of Ag NPs in not only targeting cancer cells but also modulating inflammatory responses associated with breast cancer, positioning the study at the forefront of advancements in nanomedicine and cancer therapeutics.

Silver Nanoparticles Supported onto TEMPO-Oxidized Cellulose Nanofibers for Promoting Cd2+ Cation Adsorption

Nanocellulose constitutes a sustainable and biobased solution both as an efficient sorbent material for water treatment and as support for other inorganic nanomaterials with sorbent properties. Herein, we report the synthesis of a nanocomposite by deposition of in situ-generated silver nanoparticles (AgNPs) onto TEMPO-oxidized cellulose nanofibers (TOCNFs). Following an in-depth analytical investigation, we unveil for the first time the key role of AgNPs in enhancing the adsorption efficiency of TOCNF toward Cd2+ ions, chosen as model heavy metal contaminants. The obtained nanocomposite shows a value of Cd2+ sorption capacity at equilibrium from 150 mg L-1 ion aqueous solutions of ∼116 mg g-1 against the value of 78 mg g-1 measured for TOCNF alone. A combination of field emission scanning electron microscopy (FE-SEM), energy-dispersive X-ray (EDX), and X-ray photoelectron spectroscopy (XPS) analyses suggests that Cd2+ ions are mainly adsorbed in the neighborhood of AgNPs. However, XPS characterization allows us to conclude that the role of AgNPs relies on increasing the exposure of carboxylic groups with respect to the original TOCNF, suggesting that these groups are still responsible for absorption. In fact, X-ray absorption spectroscopy (XAS) analysis of the Cd-K edge excludes a direct interaction between Ag0 and Cd2+, supporting the XPS results and confirming the coordination of the latter with carboxyl groups.

Roadmap on optical sensors

Optical sensors and sensing technologies are playing a more and more important role in our modern world. From micro-probes to large devices used in such diverse areas like medical diagnosis, defence, monitoring of industrial and environmental conditions, optics can be used in a variety of ways to achieve compact, low cost, stand-off sensing with extreme sensitivity and selectivity. Actually, the challenges to the design and functioning of an optical sensor for a particular application requires intimate knowledge of the optical, material, and environmental properties that can affect its performance. This roadmap on optical sensors addresses different technologies and application areas. It is constituted by twelve contributions authored by world-leading experts, providing insight into the current state-of-the-art and the challenges their respective fields face. Two articles address the area of optical fibre sensors, encompassing both conventional and specialty optical fibres. Several other articles are dedicated to laser-based sensors, micro- and nano-engineered sensors, whispering-gallery mode and plasmonic sensors. The use of optical sensors in chemical, biological and biomedical areas is discussed in some other papers. Different approaches required to satisfy applications at visible, infrared and THz spectral regions are also discussed.

The Synergistic Effect of Biosynthesized Silver Nanoparticles and Phytocompound as a Novel Approach to the Elimination of Pathogens

Due to the wide applications of silver nanoparticles (AgNPs), research on their ecological synthesis has been extensive in recent years. In our study, biogenic silver nanoparticles were synthesized extracellularly using the white rot fungus Trametes versicolor via two cultivation methods: static and shaking. The cell filtrate of the fungus was used as a reducing agent in the process of nanoparticle synthesis. Characterization of the obtained nanoparticles was carried out using UV-VIS spectroscopy and scanning electron microscopy. The biosynthesized nanoparticles have antimicrobial potential against pathogenic bacteria, particularly in Gram-negative strains. The bactericidal effect was obtained for E. coli at a concentration of 7 µg/mL. The use of higher concentrations of compounds was necessary for Gram-positive bacteria. Taking into account the problem of the risk of cytotoxicity of AgNPs, combined therapy using a phytochemical was used for the first time, which was aimed at reducing the doses of nanoparticles. The most representative synergistic effect was observed in the treatment of 5 µg/mL silver nanoparticles in combination with 15 µg/mL ursolic acid against E. coli and P. aeruginosa with a bactericidal effect. Moreover, the coadministration of nanoparticles considerably reduced the growth of both Staphylococcus strains, with a bactericidal effect against S. aureus. The viability test confirmed the strong synergistic effect of both tested compounds. Silver nanoparticles synthesized using the T. versicolor showed excellent antibacterial potential, which opens perspectives for future investigations concerning the use of the nanoparticles as antimicrobials in the areas of health.

Study on the Isotherms, Kinetics, and Thermodynamics of Adsorption of Crystal Violet Dye Using Ag-NPs-Loaded Cellulose Derived from Peanut-Husk Agro-Waste

A huge amount of textile dyes are released as industrial waste into the environment each year, which alters the water's natural appearance and causes toxicity and carcinogenicity in the human body. Peanut husk is considered an agro-waste and contains many valuable compounds, such as cellulose. Different concentrations of cellulose were extracted from peanut husk and then loaded with bio-silver nanoparticles, which were fabricated using neem leaves (Azadirachta indica) as a reducing agent to form Ag-cellulose nanocomposites (Ag-Cell-NCMs). Different devices were used to characterize Ag-Cell-NCMs. The TEM images displayed that the size of Ag-Cell-NCMs ranged between 13.4 and 17.4 nm after dye adsorption. The Ag-Cell-NCMs were used to adsorb toxic dyes such as crystal violet (CV). Different parameters were applied, such as the ratio of cellulose to Ag-NPs, pH, contact time, adsorbent dose, dye concentration, and the temperature required to reach the optimization conditions to remove CV dye from the aqueous solution. Different kinetics and isotherm models were applied to the experimental data to explain the mechanism of the adsorption process. The adsorption of CV on Ag-Cell-NCMs follows the pseudo-second order, and the best-fit isotherm was the Langmuir isotherm. The new composite was tested for the possibility of dye desorption and ability to be reused several times, and we found that the new nanocomposite can be reused for multiple adsorptions and there is a possibility of dye desorption.

Enhanced antibacterial properties and magnetic removal of Fe3O4/fenugreek seed gum/silver nanocomposites for water treatment

This study reports the synthesis, characterization, and antibacterial activity of a novel Fe3O4 nanocomposite coated with fenugreek seed gums and silver nanoparticles (AgNPs). To enhance the antibacterial properties of AgNPs and overcome the limitations of conventional methods for the production of three-component nanocomposites, a layer of natural polymer was used. Fenugreek seed gums (FSG) were used to coat Fe3O4 NPs to prevent their decomposition and to facilitate the release of silver nanoparticles in aqueous media. The Fe3O4/FSG/Ag nanocomposites were characterized and then the antibacterial activity of the nanocomposites was evaluated against two gram-negative and two gram-positive bacteria and compared with Fe3O4, Fe3O4/FSG, FSG, and AgNO3. The results showed that the Fe3O4/FSG/Ag nanocomposites had higher antibacterial activity than the other samples and could be easily removed from treated water by a powerful magnet without causing pollution in the environment. Overall, these findings suggest that the Fe3O4/FSG/Ag nanocomposites have potential applications in water treatment for their improved antibacterial properties and ease of removal.

Phytotoxic impact of bifunctionalized silver nanoparticles (AgNPs-Cit-L-Cys) and silver nitrate (AgNO3) on chronically exposed callus cultures of Populus nigra L

Owing to the unique physicochemical properties and the low manufacturing costs, silver nanoparticles (AgNPs) have gained growing interest and their application has expanded considerably in industrial and agricultural sectors. The large-scale production of these nanoparticles inevitably entails their direct or indirect release into the environment, raising some concerns about their hazardous aspects. Callus culture represents an important tool in toxicological studies to evaluate the impact of nanomaterials on plants and their potential environmental risk. In this study, we investigated the chronic phytotoxic effects of different concentrations of novel bifunctionalized silver nanoparticles (AgNPs-Cit-L-Cys) and silver nitrate (AgNO3) on callus culture of Populus nigra L., a pioneer tree species in the riparian ecosystem. Our results showed that AgNPs-Cit-L-Cys were more toxic on poplar calli compared to AgNO3, especially at low concentration (2.5 mg/L), leading to a significant reduction in biomass production, accompanied by a decrease in protein content, a significant increase in both lipid peroxidation level, ascorbate peroxidase (APX), and catalase (CAT) enzymatic activities. In addition, these findings suggested that the harmful activity of AgNPs-Cit-L-Cys might be correlated with their physicochemical properties and not solely attributed to the released Ag+ ions and confirmed that AgNPs-Cit-L-Cys phytoxicity is associated to oxidative stress.

Development of Novel Peptide-Modified Silver Nanoparticle-Based Rapid Biosensors for Detecting Aminoglycoside Antibiotics

The detection and monitoring of aminoglycoside antibiotics (AGAs) have become of utmost importance due to their widespread use in human and animal therapy, as well as the associated risks of exposure, toxicity, and the emergence of antimicrobial resistance. In this study, we successfully synthesized casein hydrolysate peptides-functionalized silver nanoparticles (CHPs@AgNPs) and employed them as a novel colorimetric analytical platform to demonstrate remarkable specificity and sensitivity toward AGAs. The colorimetric and spectral response of the CHPs@AgNPs was observed at 405 and 520 nm, showing a linear correlation with the concentration of streptomycin, a representative AGA. The color changes from yellow to orange provided a visual indication of the analyte concentration, enabling quantitative determination for real-world samples. The AgNP assay exhibited excellent sensitivity with dynamic ranges of approximately 200-650 and 100-700 nM for streptomycin-spiked tap water and dairy whey with limits of detection found to be ∼98 and 56 nM, respectively. The mechanism behind the selective aggregation of CHPs@AgNPs in the presence of AGAs involves the amine groups of the target analytes acting as molecular bridges for electrostatic coupling with hydroxyl or carboxyl functionalities of adjacent NPs, driving the formation of stable NP aggregates. The developed assay offers several advantages, making it suitable for various practical applications. It is characterized by its simplicity, rapidity, specificity, sensitivity, and cost-effectiveness. These unique features make the method a promising tool for monitoring water quality, ensuring food safety, and dealing with emergent issues of antibiotic resistance.

Hierarchical Bamboo/Silver Nanoparticle Composites for Sustainable Water Purification

Water reclamation is the most effective way to continuously provide clean water to combat catastrophic global water scarcity. However, current technology for water purification is not conducive to sustainability due to the high energy consumption and negative environmental impact. Here, we introduce an innovative method by utilizing the hierarchical microstructure of bamboo for water purification. Natural bamboo was delignified followed by freeze-drying to obtain a bamboo aerogel with a porosity of 72.0%; then, the bamboo aerogel was coated with silver nanoparticles to form a hierarchical bamboo/silver nanoparticle composite. The scanning electron microscopy images and energy-dispersive X-ray spectroscopy results indicated that the silver nanoparticles were uniformly attached to the parenchyma cell surface. By physical adsorption and catalytic reduction, the bamboo/silver nanoparticle composite was able to degrade methylene blue by more than 96.7%, which is mainly attributed to the large specific surface area of the bamboo providing more space for the purification reaction. This composite can be potentially used for board applications with its high porosity, mechanical reliability, and sustainability.

The antibacterial activity and immunomodulatory effect of naturally synthesized chitosan and silver nanoparticles against Pseudomonas fluorescence infection in Nile tilapia (Oreochromis niloticus): An in vivo study

A sixty-day feeding trial was conducted to assess the effects of silver nanoparticles (AgNPs) and chitosan nanoparticles (CNPs) on the growth and immunity of Nile tilapia (Oreochromis niloticus), compared with the control group. CNPs and AgNPs were green synthesized and added to a control diet (30% crude protein) at levels of 2.0 g CNPs/kg diet and 1.0 mg AgNPs/kg diet. One hundred and eighty fish (101 ± 3.98 g) were randomly distributed into nine fiberglass tanks (200 cm × 200 cm x 100 cm, twenty fish each) to represent three equal groups (60 fish per group). After one and two months of the feeding trial, parameters of water quality, growth indices, hematology, and liver and kidney biomarkers were evaluated. At the end of the experiment, 10 fish from each group were challenged experimentally via the intraperitoneal injection with Pseudomonas fluorescence and fish mortality was observed for further ten days. Then, specimens from the liver, kidney, spleen, and anterior intestine were examined to assess the histopathological alterations. Incorporating a 2.0 g CNPs/kg diet was a promising growth enhancer; however, a 1.0 mg AgNPs/kg diet had no effects on tilapia performance. Furthermore, AgNPs appeared to reduce water pollution, leading to water filtration via decreasing both total dissolved solids (TDS) and electrical conductivity (EC). A significant role of AgNPs in improving tilapia^'s erythrogram (RBCs number and Hb concentration) was evident. Compared with the control group, both groups of CNPs and AgNPs improved non-specific immune parameters and showed defense effects against P. fluorescence. The fish mortality after P. fluorescence infection in CNPs and AgNPs-fed fish groups revealed significant decreases (P < 0.05) of 10% and 25%; respectively, while the control group exhibited a mortality rate of 40%. The current investigation evoked that using dietary CNPs (2.0 g/kg feed) as an antibacterial agent against P. fluorescence infection in Nile tilapia culture was better than dietary AgNPs (1.0 mg/kg diet) which, induced cells inflammation causing tissues necrosis.

Environmental safety of nanotechnologies: The eco-design of manufactured nanomaterials for environmental remediation

Nanosafety is paramount considering the risks associated with manufactured nanomaterials (MNMs) whose implications could outweigh their advantages for environmental applications. Although nanotechnology-based solutions to implement pollution control, remediation and prevention are incremental with clear benefits for public health and Earth' natural ecosystems, nanoremediation is having a setback due to the risks associated with the safety of MNMs for humans and the environment. MNMs are diverse, work differently and bionano-interactions occurring upon environmental exposure will guide their fate and hazardous outcomes. Here we propose a new ecologically-based design strategy (eco-design) having its roots in green nanoscience and LCA that will ground on an Ecological Risk Assessment approach, which introduces the evaluation of MNMs' ecotoxicity along with their performances and efficacies at the design stage. As such, the proposed eco-design strategy will allow recognition and design-out since the very beginning of material synthesis, those hazardous peculiar features that can be hazardous to living beings and the natural environment. A more ecologically sound eco-design strategy in which nanosafety is conceptually included in MNMs design will sustain safer nanotechnologies including those for the environment as remediation by leveraging any risks for humans and natural ecosystems.

Silver Nanoparticles: Bactericidal and Mechanistic Approach against Drug Resistant Pathogens

This review highlights the different modes of synthesizing silver nanoparticles (AgNPs) from their elemental state to particle format and their mechanism of action against multidrug-resistant and biofilm-forming bacterial pathogens. Various studies have demonstrated that the AgNPs cause oxidative stress, protein dysfunction, membrane disruption, and DNA damage in bacteria, ultimately leading to bacterial death. AgNPs have also been found to alter the adhesion of bacterial cells to prevent biofilm formation. The benefits of using AgNPs in medicine are, to some extent, counter-weighted by their toxic effect on humans and the environment. In this review, we have compiled recent studies demonstrating the antibacterial activity of AgNPs, and we are discussing the known mechanisms of action of AgNPs against bacterial pathogens. Ongoing clinical trials involving AgNPs are briefly presented. A particular focus is placed on the mechanism of interaction of AgNPs with bacterial biofilms, which are a significant pathogenicity determinant. A brief overview of the use of AgNPs in other medical applications (e.g., diagnostics, promotion of wound healing) and the non-medical sectors is presented. Finally, current drawbacks and limitations of AgNPs use in medicine are discussed, and perspectives for the improved future use of functionalized AgNPs in medical applications are presented.

Application of silver nanoparticles synthesized through varying biogenic and chemical methods for wastewater treatment and health aspects

Nanotechnology uses biological and non-biological materials to create new systems at the nanoscale level. In recent years, the use of silver nanomaterials has attracted worldwide attention thanks to their wide range of applications as catalysts in several environmental processes including the degradation of organic pollutants and medicinal biotechnology. This study reports the synthesis of silver nanoparticles (AgNPs) through different methods including the biogenic methods based on leaf extract of Conocarpus erectus and a bacterial strain Pseudomonas sp. as well as chemically based abiotic method and comparison of their dye degradation potential. The synthesis of AgNPs in all samples was confirmed by UV-visible spectroscopy peaks at 418-420 nm. Using scanning electrom microscopy (SEM), Fourier transform infrared spectroscopy (FT-IR), X-ray differaction (XRD), and X-ray photoelectron spectroscopy (XPS), the biologically synthesized AgNPs were characterized as spherical shape of material with capping proteins that were involved in the stabilization of nanoparticles (NPs). The biologically synthesized AgNPs showed higher degradation (< 90%) of dyes as compared to chemically synthesized NPs. A prominent reduction of total dissolved solids (TDS), electrical conductivity (EC), pH, and chemical oxygen demand (COD) in textile wastewater spiked with reactive black 5 and reactive red 120 was observed by biologically synthesized AgNPs. AgNPs synthesized by Conocarpus erectus and Pseudomonas sp. also showed better characteristic anticancer and antidiabetic activities as compared to chemically synthesized ones. The results of this study suggested that C. erectus and Pseudomonas sp. based AgNPs can be exploited as an eco-friendly and cost-efficient materials to treat the wastewater and potential other polluted environments as well as to serve the medicinal field.

Evaluation of acute toxicity response to the algae Chlorella pyrenoidosa of biosynthetic silver nanoparticles catalysts

Biosynthetic of silver nanoparticles (AgNPs) by using fungi has attracted much attention due to its high catalytic efficiency and environmentally friendly characteristic. However, a few studies have focused on the ecological toxicity effects of biogenic AgNPs on algae. Here, we first investigated the catalytic reduction of 4-nitrophenol (4-NP) by WZ07-AgNPs biosynthesized by Letendraea sp. WZ07. WZ07-AgNPs had significant catalytic activity with 97.08% degradation of 4-NP in 3.5 min. Then, the toxic effects of WZ07-AgNPs and commercial-AgNPs were compared by Chlorella pyrenoidosa growth, chlorophyll content, protein content, physiological, and biochemical indexes. The results demonstrated that the algal cell biomass of C. pyrenoidosa was differentially inhibited after exposure to different concentrations of AgNPs, which showed concentration dependence and time dependence. The 96h-EC₅₀ values of WZ07-AgNPs and commercial-AgNPs on C. pyrenoidosa were 15.99 mg/mL and 12.69 mg/mL, respectively. With the increase concentration of AgNPs, the chlorophyll content was gradually decreased, the protein content was first increased and then decreased, the activities of superoxide dismutase (SOD) and catalase (CAT) were decreased, and the level of malondialdehyde (MDA) was increased significantly of C. pyrenoidosa. In general, AgNPs affect the growth of algae to some extent. However, compared with commercial-AgNPs, WZ07-AgNPs is less toxic to C. pyrenoidosa, which could be used as a potential and an eco-friendly catalyst. This study provides a basis for the safe application of biosynthetic AgNPs.

Silver Nanoparticle Synthesis via Photochemical Reduction with Sodium Citrate

The aim of this paper is to provide a simple and efficient photoassisted approach to synthesize silver nanoparticles, and to elucidate the role of the key factors (synthesis parameters, such as the concentration of TSC, irradiation time, and UV intensity) that play a major role in the photochemical synthesis of silver nanoparticles using TSC, both as a reducing and stabilizing agent. Concomitantly, we aim to provide an easy way to evaluate the particle size based on Mie theory. One of the key advantages of this method is that the synthesis can be "activated" whenever or wherever silver nanoparticles are needed, by premixing the reactants and irradiating the final solution with UV radiation. UV irradiance was determined by using Keitz's theory. This argument has been verified by premixing the reagents and deposited them in an enclosed space (away from sunlight) at 25 °C, then checking them for three days. Nothing happened, unless the sample was directly irradiated by UV light. Further, obtained materials were monitored for 390 days and characterized using scanning electron microscopy, UV-VIS, and transmission electron microscopy.

Balanites aegyptiaca leaf extract-mediated synthesis of silver nanoparticles and their catalytic dye degradation and antifungal efficacy

This study describes the biosynthesis of silver nanoparticles (AgNPs) using Balanites aegyptiaca (B. aegyptiaca) leaf extract. The biosynthesized AgNPs were characterized by UV-Vis spectroscopy, Fourier transform infrared spectroscopy (FTIR), dynamic light scattering (DLS), X-ray diffraction (XRD), Raman spectroscopy, transmission electron microscopy (TEM) and scanning electron microscopy with (SEM-EDS). The AgNPs showed an average size of 10–20 nm, spherical shape, and crystalline nature. The application of these synthesized AgNPs to dye degradation showed that the AgNPs removed the two organic pollutants methylene blue (MB, 93.47%) and congo red (CR, (78.57%). In vitro investigation of the antifungal activity of the AgNPs against Fusarium oxysporum, a phytopathogenic fungus, showed a maximum percent radial growth inhibition of 82.00 ± 1.00% and a spore percent inhibition of 73.66 ± 3.94 for 150 μg/ml of biosynthesized AgNPs.

Ecologically based methods for promoting safer nanosilver for environmental applications

Nanosilver, widely employed in consumer products as biocide, has been recently proposed as sensor, adsorbent and photocatalyst for water pollution monitoring and remediation. Since nanosilver ecotoxicity still pose limitations to its environmental application, a more ecological exposure testing strategy should be coupled to the development of safer formulations. Here, we tested the environmental safety of novel bifunctionalized nanosilver capped with citrate and L-cysteine (AgNPcitLcys) as sensor/sorbent of Hg²⁺ in terms of behaviour and ecotoxicity on microalgae (1-1000 µg/L) and microcrustaceans (0.001-100 mg/L), from the freshwater and marine environment, in acute and chronic scenarios. Acute toxicity resulted poorly descriptive of nanosilver safety while chronic exposure revealed stronger effects up to lethality. Low dissolution of silver ions from AgNPcitLcys was observed, however a nano-related ecotoxicity is hypothesized. Double coating of AgNPcitLcys succeeded in mitigating ecotoxicity to tested organisms, hence encouraging further research on safer nanosilver formulations. Environmentally safe applications of nanosilver should focus on ecologically relevant exposure scenarios rather than relying only on acute exposure data.

Selective detection of tartaric acid using amino acid interlinked silver nanoparticles as a colorimetric probe

A variety of biomolecules with different functional groups play critical roles in almost all the processes occurring in living cells. Interaction of metallic nanoparticles (NPs) with various biomolecules generates a layer of molecules on their surface, and this biomolecular rich layer formed on the NP surface is described as a "biomolecular corona". The physicochemical properties of the NPs, including size, adsorption affinity, and charge on the particles' surfaces are the major factors influencing the characteristics of this corona. The formation of various biomolecular corona has been studied well, whereas the amino acid corona is relatively new by exploring their stability. In the present study, a novel formation of an amino acid corona with a fundamental interaction mechanism for a selective detection procedure using a colorimetric platform has been proposed. Herein, amino acid-coated silver NPs (AgNPs) have been used as a template with spectroscopic (steady state UV-Vis, FTIR) and imaging (HR-TEM, DLS) techniques. Our findings demonstrated that among different amino acid coronas, glutathione (GSH) stabilized AgNPs show a rapid reaction with tartaric acid. The extent and thermodynamics of the formed complex between the GSH/AgNPs and tartaric acid have also been studied and this suggested that the complex formed is spontaneous and energy releasing in nature.

Potential application of Au core labeling for tracking Ag nanoparticles in the aquatic and biological system

The entering of silver nanoparticles (Ag NPs) in natural environments constantly increases due to their widespread production and application. While the environmental behavior, impacts, and fate of Ag NPs were critically assessed, the main challenge represents continuous tracking and quantification of Ag NPs in environmental and biological matrices. A group of labeled Ag NPs with gold cores (Au@Ag NPs) was developed for distinguishing between pristine Ag NPs and their other forms, and we comprehensively compared their physicochemical properties, environmental behavior, and biological effects with unlabeled Ag NPs. The electron transfer process from the Au core to the Ag shell gradually decreased with the increase of Ag shell thickness, then the inhibition of Ag⁺ release induced by the Au core was gradually alleviated, but the generation of superoxide radicals was intensified sharply. Then, the effect of the Au core on the dissolution capacity and free radicals' generation significantly altered the biological toxicity of Ag NPs, and the influence degree was related to the test organism's species. Nevertheless, the Au core retained the surface properties of Ag NPs, leading to the uptake of Au@Ag NPs, entirely consistent with the behavior of unlabeled Ag NPs. These findings confirmed that Au core labeling provides new opportunities for tracking Ag NPs in environmental and biological systems, and the exposure conditions and test organisms should be carefully assessed before employing the Au core labeling technology.

In-situ synthesis of metal nanoparticle embedded soft hybrid materials via eco-benign approach

The unique optical and electronic properties of metal nanoparticles and tunable properties of the organic templates encourage the scientific community to generate metal nanoparticle embedded soft hybrid materials for various novel utilities. Here, we discuss the in-situ synthesis of metal nanoparticle embedded soft hybrid materials via eco-benign approach which exclude the use of toxic reducing/capping agents or toxic reaction media. In this protocol, the gel matrix composed of benign organic templates act as reducing as well as stabilizing agent for the in-situ generation and stabilization of metal nanoparticles. As the incorporation of metal salts (as nanoparticle precursor) in the gel medium is required in this process, in most of the cases aqueous media were used for the generation of metal nanoparticle embedded soft hybrid materials. This discussion includes interesting findings from our laboratory where hybrid gel matrix composed of renewable chemicals was utilized for the in-situ synthesis of palladium nanoparticle embedded soft trihybrid material. The hybrid gel matrix rich in polyphenols/flavonoids was exploited to generate palladium nanoparticle embedded trihybrid gel through in-situ reduction of doped Pd (II) salts to stable PdNPs. The xerogel of this trihybrid material was utilized as recyclable heterogeneous catalyst for C-C coupling reaction in air under phosphene free condition and reduction reaction.

Building the Bridge From Aquatic Nanotoxicology to Safety by Design Silver Nanoparticles

Nanotechnologies have rapidly grown, and they are considered the new industrial revolution. However, the augmented production and wide applications of engineered nanomaterials (ENMs) and nanoparticles (NPs) inevitably lead to environmental exposure with consequences on human and environmental health. Engineered nanomaterial and nanoparticle (ENM/P) effects on humans and the environment are complex and largely depend on the interplay between their peculiar properties such as size, shape, coating, surface charge, and degree of agglomeration or aggregation and those of the receiving media/body. These rebounds on ENM/P safety and newly developed concepts such as the safety by design are gaining importance in the field of sustainable nanotechnologies. This article aims to review the critical characteristics of the ENM/Ps that need to be addressed in the safe by design process to develop ENM/Ps with the ablility to reduce/minimize any potential toxicological risks for living beings associated with their exposure. Specifically, we focused on silver nanoparticles (AgNPs) due to an increasing number of nanoproducts containing AgNPs, as well as an increasing knowledge about these nanomaterials (NMs) and their effects. We review the ecotoxicological effects documented on freshwater and marine species that demonstrate the importance of the relationship between the ENM/P design and their biological outcomes in terms of environmental safety.

Cellulose for the Production of Air-Filtering Systems: A Critical Review

The control of airborne contaminants is of great interest in improving air quality, which has deteriorated more and more in recent years due to strong industrial growth. In the last decades, cellulose has been largely proposed as suitable feedstock to build up eco-friendly materials for a wide range of applications. Herein, the issue regarding the use of cellulose to develop air-filtering systems is addressed. The review covers different cellulose-based solutions, ranging from aerogels and foams to membranes and films, and to composites, considering either particulate filtration (PM₁₀, PM_2.5, and PM_0.3) or gas and water permeation. The proposed solutions were evaluated on the bases of their quality factor (QF), whose high value (at least of 0.01 Pa^-1 referred to commercial HEPA (high-efficiency particulate air) filters) guarantees the best compromise between high filtration efficiency (>99%) and low pressure drop (<1 kPa/g). To face this aspect, we first analyzed the different morphological aspects which can improve the final filtration performance, outlining the importance on using nanofibers not only to increase surface area and to modulate porosity in final solutions, but also as reinforcement of filters made of different materials. Besides the description of technological approaches to improve the mechanical filtration, selected examples show the importance of the chemical interaction, promoted by the introduction of active functional groups on cellulose (nano)fibers backbone, to improve filtration efficiency without reducing filter porosity.

Solar Cookers and Dryers: Environmental Sustainability and Nutraceutical Content in Food Processing

This work reviewed the state of the art concerning solar cookers and dryers used in food processing. The general description of solar cookers and dryers was presented, with a specific attention to the equipment where the cooking takes place with the contribution of the direct sunlight. Some insight about the history of design and development of devices that use solar light to process food were provided. The possibility to store the heat produced by solar light using Phase Change Materials was analyzed. Moreover, some "case-studies" were revised and discussed, in which solar light is efficiently used to dry or cook food, focusing on the quality of the food in terms of nutraceuticals content. The analyzed literature points out the necessity for further research about the effects produced by direct solar rays on different foods. The reliable data on this aspect will allow assessment of the quality of food transformation by solar cookers and dryers, adding a strong incentive to the development of such devices, up to now primarily motivated by energy-saving and environmental issues.

Synthesis and Characterization of Silver Nanoparticles Prepared with Carrasquilla Fruit Extract (Berberis hallii) and Evaluation of Its Photocatalytic Activity

In this study, silver nanoparticles (AgNPs) were obtained using a green-chemistry procedure. For this protocol, the Carrasquilla extract (CE) (Berberis hallii) and a AgNO3 solution were used as the reducing agent and the metal precursor, respectively. The as-prepared AgNPs after characterization were then used to evaluate the degradation of the methylene blue (MB), the safranin (SF), and the mixture of both dyes in the aqueous phase under solar light irradiation. The photocatalytic activity of AgNPs for the degradation of the MB (k = 0.0092 min−1) was higher than the SF (k = 0.00016 min−1) due to the susceptibility of the thiazine ring of the MB to photodegradation contrasted to the phenyl phenazine of the SF. However, SF was mostly removed by adsorption with a maximum uptake of 2907 mg/g. Overall, this eco-friendly and green conversion of silver ions to metallic elements avoids the use of toxic chemicals and could be applied for the degradation/adsorption of dyes used in several industrial processes.

Biocompatible Silver Nanoparticles: Study of the Chemical and Molecular Structure, and the Ability to Interact with Cadmium and Arsenic in Water and Biological Properties

In the field of research for designing and preparing innovative nanostructured systems, these systems are able to reveal the presence of heavy metals in water samples, and can efficiently and selectively interact with them, allowing for future applications in the field of water remediation. We investigated the electronic and molecular structure, as well as the morphology, of silver nanoparticles stabilized by mixed biocompatible ligands (the amino acid L-cysteine and the organic molecule citrate) in the presence of cadmium and arsenic ions. The molecular, electronic, and local structure at the ligands/silver nanoparticles interface was probed by the complementary synchrotron radiation-induced techniques (SR-XPS, NEXAFS and XAS). The optical absorption (in the UV-Vis range) of the nanosystem was investigated in the presence of Cd(II) and As(III) and the observed behavior suggested a selective interaction with cadmium. In addition, the toxicological profile of the innovative nanosystem was assessed in vitro using a human epithelial cell line HEK293T. We analyzed the viability of the cells treated with silver nanoparticles, as well as the activation of antioxidant response.

A Review on Silver Nanoparticles: Classification, Various Methods of Synthesis, and Their Potential Roles in Biomedical Applications and Water Treatment

Recent developments in nanoscience have appreciably modified how diseases are prevented, diagnosed, and treated. Metal nanoparticles, specifically silver nanoparticles (AgNPs), are widely used in bioscience. From time to time, various synthetic methods for the synthesis of AgNPs are reported, i.e., physical, chemical, and photochemical ones. However, among these, most are expensive and not eco-friendly. The physicochemical parameters such as temperature, use of a dispersing agent, surfactant, and others greatly influence the quality and quantity of the synthesized NPs and ultimately affect the material’s properties. Scientists worldwide are trying to synthesize NPs and are devising methods that are easy to apply, eco-friendly, and economical. Among such strategies is the biogenic method, where plants are used as the source of reducing and capping agents. In this review, we intend to debate different strategies of AgNP synthesis. Although, different preparation strategies are in use to synthesize AgNPs such as electron irradiation, optical device ablation, chemical reduction, organic procedures, and photochemical methods. However, biogenic processes are preferably used, as they are environment-friendly and economical. The review covers a comprehensive discussion on the biological activities of AgNPs, such as antimicrobial, anticancer anti-inflammatory, and anti-angiogenic potentials of AgNPs. The use of AgNPs in water treatment and disinfection has also been discussed in detail.

A Review on the Role and Performance of Cellulose Nanomaterials in Sensors

Sensors and biosensors play a key role as an analytical tool for the rapid, reliable, and early diagnosis of human diseases. Such devices can also be employed for monitoring environmental pollutants in air and water in an expedited way. More recently, nanomaterials have been proposed as an alternative in sensor fabrication to achieve gains in performance in terms of sensitivity, selectivity, and portability. In this direction, the use of cellulose nanomaterials (CNM), such as cellulose nanofibrils (CNF), cellulose nanocrystals (CNC), and bacterial cellulose (BC), has experienced rapid growth in the fabrication of varied types of sensors. The advantageous properties are related to the supramolecular structures that form the distinct CNM, their biocompatibility, and highly reactive functional groups that enable surface functionalization. The CNM can be applied as hydrogels and xerogels, thin films, nanopapers and other structures interesting for sensor design. Besides, CNM can be combined with other materials (e.g., nanoparticles, enzymes, carbon nanomaterials, etc.) and varied substrates to advanced sensors and biosensors fabrication. This review explores recent advances on CNM and composites applied in the fabrication of optical, electrical, electrochemical, and piezoelectric sensors for detecting analytes ranging from environmental pollutants to human physiological parameters. Emphasis is given to how cellulose nanomaterials can contribute to enhance the performance of varied sensors as well as expand novel sensing applications, which could not be easily achieved using standard materials. Finally, challenges and future trends on the use of cellulose-based materials in sensors and biosensors are also discussed.

Synergic Effect of TiO2 Filler on the Mechanical Properties of Polymer Nanocomposites

Nanocomposites with polymer matrix offer excellent opportunities to explore new functionalities beyond those of conventional materials. TiO₂, as a reinforcement agent in polymeric nanocomposites, is a viable strategy that significantly enhanced their mechanical properties. The size of the filler plays an essential role in determining the mechanical properties of the nanocomposite. A defining feature of polymer nanocomposites is that the small size of the fillers leads to an increase in the interfacial area compared to traditional composites. The interfacial area generates a significant volume fraction of interfacial polymer, with properties different from the bulk polymer even at low loadings of the nanofiller. This review aims to provide specific guidelines on the correlations between the structures of TiO₂ nanocomposites with polymeric matrix and their mechanical properties. The correlations will be established and explained based on interfaces realized between the polymer matrix and inorganic filler. The paper focuses on the influence of the composition parameters (type of polymeric matrix, TiO₂ filler with surface modified/unmodified, additives) and technological parameters (processing methods, temperature, time, pressure) on the mechanical strength of TiO₂ nanocomposites with the polymeric matrix.

A critical review on silver nanoparticles: From synthesis and applications to its mitigation through low-cost adsorption by biochar

Silver nanoparticles are one of the most beneficial forms of heavy metals in nanotechnology applications. Due to its exceptional antimicrobial properties, low electrical and thermal resistance, and surface plasmon resonance, silver nanoparticles are used in a wide variety of products, including consumer goods, healthcare, catalysts, electronics, and analytical equipment. As the production and applications of silver nanoparticles containing products increase daily, the environmental pollution due to silver nanoparticles release is increasing and affecting especially the aqueous ecosystem. Silver nanoparticles can kill useful bacteria in soil and water, and bioaccumulate in living organisms even at low concentrations from 10^-2 to 10 μg/mL silver can show antibacterial effect. On the other hand, the maximum silver discharge limit into freshwater is 0.1 μg/L and 3.2 μg/L for Australia and the USA, respectively. To reduce its toxic consequences and meet the regulatory guidelines, it is crucial to remove silver nanoparticles from wastewater before it is discharged into other water streams. Several technologies are available to remove silver nanoparticles, but the adsorption process using low-cost adsorbents is a promising alternative to mitigate silver nanoparticle pollution in the bulk stage. As one of the low-cost adsorbents, biochar produced from the biomass waste could be a suitable adsorbent. This review focuses on collating the latest evidence on silver nanoparticle production, applications, environmental consequences, and cost-effective technological approaches for silver removal from wastewater.

Review on Silver Nanoparticles as a Novel Class of Antibacterial Solutions

Nanomaterials represent a promising novel class of materials to be used as antibacterial solutions. Inhomogeneity of synthesis and characterization methods, as well as resulting variate physical and chemical properties make selection of proper nanostructure difficult when designing antimicrobial experiments. Present study focuses on the already existing evidence regarding silver nanoparticles and their antibacterial applications, with focus on various modulatory factors of reported antimicrobial efficiency. Present paper focuses on synthesis and characterization methods, factors modulating antibacterial efficiency, laboratory quantification procedures, as well as up–to-date knowledge on mechanisms of antibacterial action for silver nanoparticles. Moreover, challenges and future prospects for antimicrobial applications of silver nanoparticles are reviewed and discussed.

Graphene-assisted preparation of large-scale single-crystal Ag(111) nanoparticle arrays for surface-enhanced Raman scattering

Surface plasmon resonance (SPR) of metal nanostructures has broad application prospects in the fields of sensing, energy, catalysis and optics. This paper reports a graphene-assisted method for preparing large-scale single-crystal Ag(111) nanoparticle (NP) arrays based on the ion implantation technique. By surface periodic patterning treatment and annealing of the implanted sample, regularly arranged Ag NPs can be prepared on the sample surface. A new application for graphene is proposed, that is, as a perfect barrier layer to prevent metal atoms from evaporating or diffusing. All the Ag NPs show (111) crystal orientation. Besides, the Ag atoms are covered by graphene immediately when they precipitate from the substrate, which can prevent them from being oxidized. On the basis of this structure, as one of the applications of the metal SPR, we have measured the surface-enhanced Raman scattering effect and found that the G peak of the Raman spectrum of the graphene achieved about 20 times enhancement.