The Study of the Degree of Crystallinity, Electrical Equivalent Circuit, and Dielectric Properties of Polyvinyl Alcohol (PVA)-Based Biopolymer Electrolytes

In vitro and in silico approach towards antimicrobial and antioxidant behaviour of water-soluble chitosan dialdehyde biopolymers

Chitosan dialdehyde (ChDA) was prepared from a three-step process initiated by thermal organic acid hydrolysis, periodate oxidization, and precipitation from native chitosan (NCh). The developed ChDA resulted in an aldehydic content of about 82 % with increased solubility (89 %) and maximum yield (97 %). The functional alteration of the aldehydic (-CHO) group in ChDA was established using vibrational stretching at 1744 cm-1. The increase in the zone of inhibition of ChDA compared to NCh has confirmed the inherent antimicrobial effect against bacterial and fungal species. ChDA showed better antioxidant activity of about 97.4 % (DPPH) and 31.1 % (ABTS) compared to NCh, measuring 45.3 % (DPPH) and 15.9 % (ABTS), respectively. The novel insilico predictions of the ChDA's biocidal activity were confirmed through molecular docking studies. The amino acid moiety such as ARG 110 (A), ASN 206 (A), SER 208 (A), THR 117 (B), ASN 118 (B), and LYS 198 (B) residues of 7B53 peptide from E. coli represents the binding pockets responsible for interaction with aldehyde group of ChDA. Whereas PHE 115 (E), ALA 127 (H), TYR 119 (C), GLN 125 (H), ASN 175 (E), ARG 116 (E), LYS 101 (H), and LYS 129 (H) of 1IYL A peptide from Candida albicans makes possible for binding with ChDA. Hence, the synergistic effect of ChDA as a biocidal compound is found to be plausible in the drug delivery system for therapeutic applications.

Fabrication of a ternary biocomposite film based on polyvinyl alcohol, cellulose nanocrystals, and silver nanoparticles for food packaging

Silver nanoparticles (AgNPs) were loaded on deprotonated cellulose nanocrystals (CNCd) and incorporated into polyvinyl alcohol (PVA) to develop novel active food packaging films. The AgNPs were fabricated using the liquid phase chemical reduction method using the sodium borohydride reductant of AgNO3. The analysis using X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FT-IR), Thermogravimetric analysis (TGA), Differential scanning calorimetry (DSC), and Ultraviolet-visible spectroscopy (UV-Vis) showed that the CNCd surface had a homogeneous distribution of AgNPs with a diameter of about 100 nm. Additionally, CNCd/Ag was successfully incorporated into the PVA film. The developed PVA/CNCd/Ag film showed significantly improved mechanical properties, thermal stability, and UV barrier properties compared to a neat PVA film. The PVA/CNCd/Ag composite film could significantly preserve bananas for 14 days, preventing deterioration and allowing extended storage periods. This composite film generally shows promise in food packaging and prolongs food's shelf life.

Biophysical studies of modified PVC sheet based on sunflower oil for antistatic and blood bags applications

In this work, the surface of polyvinyl chloride PVC sheet was modified by blending it with sunflower seed oil SSO to obtain PVC sheet/SSO films of ratios 100/0, 90/10, 80/20, 70/30, 60/40, and 50/50 (v/v)% using the solution casting method. Various techniques were used to characterize the prepared films, besides the use of hemolysis assays and blood clot formation tests. FTIR spectra revealed that there was a good interaction between the PVC sheet and the oil. The dielectric measurement indicated that SSO addition enhanced the dielectric properties of the sheet. The study of dielectric relaxation times confirmed the interaction between SSO and the sheet. DC conductivity increased to 6 × 10-6 S/m, so it could be applied in antistatic applications. Also, SSO addition increased the value of the thermal stability. According to SEM micrographs, the film was roughened at a ratio of 60/40 and smoothed out at 50/50. This behavior was confirmed with roughness and contact angle measurement results, in which the film of ratio 60/40 had the highest value equal to (72.03°) and then decreased at 50/50 to (59.62°). These results were confirmed by XRD measurement as the crystallinity increased at the film ratio of 60/40 and decreased again at 50/50. Also, the ratio of 60/40 demonstrated a large decrease in thrombus weights along with a slight increase in hemolysis, which is within the acceptable range and has a high degree of biocompatibility, so this concentration is recommended to be used in blood bags applications.

A high-performance organic lithium salt-doped OFET with the optical radical effect for photoelectric pulse synaptic simulation and neuromorphic memory learning

Simulation of synaptic characteristics is essential for the application of organic field effect transistors (OFETs) in neural morphology. Although excellent performance, including bias stability and mobility, as well as photoelectric pulse synaptic simulation, has been achieved in SiO2-gated OFETs with PDVT-10 as an organic channel, there are relatively few studies on photoelectric pulse synaptic simulation of electrolyte-gated OFETs based on environmentally friendly and low-voltage operation. Herein, synaptic transistors based on organic semiconductors are reported to simulate the photoelectric pulse response by developing solution-based organic semiconductor PDVT-10, and polyvinyl alcohol (PVA) with an electric double layer (EDL) effect to act as a channel and gate dielectric layer, respectively, and organic lithium salt-doped PVA is used to enhance the EDL effect. The presence of electrical pulses in doped devices not only achieves basic electrical synaptic characteristics, but also significantly realizes the long-term characteristics, pain perception, memory and sensitization applications. Furthermore, the introduction of photoinitiator molecules into the channel layer leads to improved photosynaptic performances by using light-induced free radicals, and the photoelectric synergistic effect has been actualized by introducing heterojunction architecture. This work provides promising prospects for achieving photoelectric pulse modulation based on organic synaptic devices, which shows great potential for the development of artificial intelligence.

Release and Degradation Mechanism of Modified Polyvinyl Alcohol-Based Double-Layer Coated Controlled-Release Phosphate Fertilizer

This study aims to improve the slow-release performance of a film material for a controlled-release fertilizer (CRF) while enhancing its biodegradability. A water-based biodegradable polymer material doped with biochar (BC) was prepared from modified polyvinyl alcohol (PVA) with polyvinylpyrrolidone (PVP) and chitosan (CTS), hereinafter referred to as PVA/PVP-CTSaBCb. An environmentally friendly novel controlled-release phosphate fertilizer (CRPF) was developed using PVA/PVP-CTS8%BC7% as the film. The effect of the PVA/PVP-CTS8%BC7% coating on the service life of the CRPF was investigated. The film was characterized via stress-strain testing, SEM, FTIR, XRD, and TGA analyses. The addition of the CTS modifier increased the stress of PVA/PVP-CTS8% by 7.6% compared with that of PVA/PVP owing to the decrease in the crystallinity of PVP/PVP-CTS8%. The hydrophilic -OH groups were reduced due to the mixing of CTS and PVA/PVP. Meanwhile, the water resistance of the PVA/PVP-CTS8%BC7% was improved. And the controlled-release service life of the CRPF was prolonged. Moreover, the addition of BC increased the crystallinity of the PVA/PVP-CTS8% by 10%, reduced the fracture elongation of the material, and further improved the biodegradability of the PVA/PVP-CTS8%BC7%. When the amount of BC added was 7%, the phosphorus release rate of the CRPF was 30% on the 28th day. Moreover, the degradation rate of the PVA/PVP-CTS8%BC7% polymer film was 35% after 120 days. This study provides basic data for applying water-based degradable polymer materials in CRFs.

Active packaging: Development and characterization of polyvinyl alcohol (PVA) and nitrite film for pork preservation

In this study, an active films of polyvinyl alcohol (PVA) films, incorporated with sodium nitrite were developed, characterized and applied to pork stored for six days at 25 °C. As for the film characterization by FTIR, no chemical interactions were observed between nitrite and PVA under the studied conditions. The physical properties of the PVA films were not altered by the presence of nitrite. PVA films incorporated with 100 ppm nitrite reduced TBARS values of refrigerated pork from 0.63 µmol MDA/g (control) to 0.49 µmol MDA/g (PVA 01). Color changes were observed in all meat samples packaged with the film. It is concluded that the presence of nitrite does not interfere in the physical properties of the PVA films and that the developed films have an active potential for application in pork in natura.

Composite Hydrogel of Poly(vinyl alcohol) Loaded by Citrus hystrix Leaf Extract, Chitosan, and Sodium Alginate with In Vitro Antibacterial and Release Test

Citrus hystrix leaves have been used traditionally as a spice, a traditional medicine for respiratory and digestive disorders, and a remedy for bacterial infections. This study reports on the synthesis of composite hydrogels using the freeze-thaw method with poly(vinyl alcohol) (PVA) as the building block loaded by C. hystrix leaf extract (CHLE). Additionally, chitosan (CS) and sodium alginate (SA) were also loaded, respectively, to increase the antibacterial activity and to control the extract release of the composite hydrogels. The combinations of the compositions were PVA, PVA/CHLE, PVA/CHLE/CS, PVA/CHLE/SA, and PVA/CHLE/SA/CS. The internal morphology of the hydrogels shows some changes after the PVA/CHLE hydrogel was loaded by CS, SA, and SA/CS. The analysis of the Fourier transform infrared (FTIR) spectra confirmed the presence of PVA, CHLE, CS, and SA in the composite hydrogels. From the X-ray diffraction (XRD) characterization, it was shown that the composite hydrogels maintained their semicrystalline properties with decreasing crystallinity degree after being loaded by CS, SA, and SA/CS, as also supported by differential scanning calorimetry (DSC) characterization. The compressive strength of the PVA/CHLE hydrogel decreases after the loading of CS, SA, and SA/CS, so that it becomes more elastic. Despite being loaded in the composite hydrogels, the CHLE retained its antibacterial activity, as evidenced in the in vitro antibacterial test. The loading of CS succeeded in increasing the antibacterial activity of the composite hydrogels, while the loading of SA resulted in the decrease of the antibacterial activity. The release of extract from the composite hydrogels was successfully slowed down after the loading of CS, SA, and SA/CS, resulting in a controlled release following the pseudo-Fickian diffusion. The cytotoxic activity test proved that all hydrogel samples can be used safely on normal cells up to concentrations above 1000 μg/mL.

Electrochemical properties of a novel EDLC derived from plasticized biopolymer based electrolytes with valuable energy density close to NiMH batteries

This study introduces a novel system of solid electrolytes for electrical double-layer capacitors (EDLCs) utilizing biopolymer electrolytes with high energy density comparable to NiMH batteries. To prepare the electrolytes, a proton-conducting plasticized chitosan: poly(2-oxazoline) (POZ) with good film-forming properties was fabricated using a solution casting technique, and ammonium trifluoromethanesulfonate (NH4CF3SO3) salt was employed as a proton provider. Various glycerol concentrations were incorporated into the chitosan:POZ: NH4CF3SO3 system to enhance the ionic conductivity and fully transparent films were obtained. The impedance technique was utilized to determine the conductivity and measure the diffusion coefficient, mobility, and number density of ions. The electrochemical measurements, including linear sweep voltammetry (LSV) and cyclic voltammetry (CV), validated the high performance of the system. The EDLC was examined using galvanostatic charge-discharge (GCD) equipment, and the results revealed an energy density of 43 Wh/kg, specific capacitance of 300 F/g, and power density of 1800 W/kg over 500 cycles. These findings suggest that it is plausible to develop EDLCs that resemble batteries, making them a more desirable energy storage option for the industry.

Fabrication and Testing of Crop Waste Ceiba pentandra Shell Powder Reinforced Biodegradable Composite Films

Ceiba pentandra shell powder (CPSP) biowaste is chosen as a biofiller combined with poly(vinyl alcohol) (PVA) as a matrix to make biofilms to increase the exploitation of biowaste materials and reduce the use of plastic materials. FTIR plots indicated no significant chemical reaction or formation of new functional groups during interaction between PVA and CPSP. XRD diffractograms showed that the crystallinity index (35.3, 38.6, 42.3, 46.4, and 48.5%) and crystalline size (18.14, 20.89, 23.23, 24.87, and 26.34 nm) of biofilms increased with CPSP loading (5-25 wt %). The PVA/CPSP films are thermally stable up to 322 °C. The peak highs of AFM images showed that the films' surface roughness gradually increased from 94.75 nm (5 wt % CPSP) to 320.17 nm (25 wt % CPSP). The FESEM micrographs clarify the homogeneous distribution of CPSP in the PVA matrix. Tensile strength and tensile modulus are noticeably increased by 26.32 and 37.92%, respectively, as a result of the loading of CPSP from 5 to 20 wt % in the PVA matrix. The PVA/CPSP films outperform pure PVA films in UV shielding (350-450 nm). The 59% weight loss of films was estimated during 60 days of burial. The fabricated biofilms maintained their suitable structural, thermal, morphological, and mechanical properties. Additionally, they exhibited consistent performance in ultraviolet (UV) barrier, opacity, water absorption, water vapor permeability, soil burial, and antimicrobial characteristics over time. Overall, PVA/CPSP (5-25 wt %) films are biodegradable and have promising applications as good packaging materials.

Polyvinyl Alcohol Nanofibers Blends as Drug Delivery System in Tissue Regeneration

Nanofibers have shown promising clinical results in the process of tissue regeneration since they provide a similar structure to the extracellular matrix of different tissues, high surface-to-volume ratio and porosity, flexibility, and gas permeation, offering topographical features that stimulate cell adhesion and proliferation. Electrospinning is one of the most used techniques for manufacturing nanomaterials due to its simplicity and low cost. In this review, we highlight the use of nanofibers produced with polyvinyl alcohol and polymeric associations (PVA/blends) as a matrix for release capable of modifying the pharmacokinetic profile of different active ingredients in the regeneration of connective, epithelial, muscular, and nervous tissues. Articles were selected by three independent reviewers by analyzing the databases, such as Web of Science, PubMed, Science Direct, and Google Scholar (last 10 years). Descriptors used were "nanofibers", "poly (vinyl alcohol)", "muscle tissue", "connective tissue", "epithelial tissue", and "neural tissue engineering". The guiding question was: How do different compositions of polyvinyl alcohol polymeric nanofibers modify the pharmacokinetics of active ingredients in different tissue regeneration processes? The results demonstrated the versatility of the production of PVA nanofibers by solution blow technique with different actives (lipo/hydrophilic) and with pore sizes varying between 60 and 450 nm depending on the polymers used in the mixture, which influences the drug release that can be controlled for hours or days. The tissue regeneration showed better cellular organization and greater cell proliferation compared to the treatment with the control group, regardless of the tissue analyzed. We highlight that, among all blends, the combinations PVA/PCL and PVA/CS showed good compatibility and slow degradation, indicating their use in prolonged times of biodegradation, thus benefiting tissue regeneration in bone and cartilage connective tissues, acting as a physical barrier that results in guided regeneration, and preventing the invasion of cells from other tissues with increased proliferation rate.

Plaster Gel Loaded with Silver Nanoparticle-Mediated Ganoderma applanatum: from Fabrication to Evaluation

Traditional Asian remedies have mainly employed the macrofungus Ganoderma applanatum, which belongs to the family Ganodermataceae, as a medicinal mushroom due to its high antibacterial and antioxidant activity. Extracts of the fungus can be synthesized into nanoparticles, which are subsequently produced as plaster gels. Synthesized silver nanoparticle-mediated G. applanatum was discovered to have the greatest ability to inhibit bacterial growth in S. epidermidis. When applied to the skin, the prepared plaster gel converted from a gel to a film; thus, both gel and film generation are characteristic of its formulation. The plaster gel that was made was found to be consistent and attractive, and the yellow color had darkened. Its viscosity and pH were appropriate for the application and allowed it to remain on the skin without dripping or reacting with the skin until it dried. A shorter duration for film formation is possible. The film's tensile was slightly reduced, and it exhibited excellent thermal stability. Decomposition of the generated film occurred at a slower rate, which constrained the polymer chain's ability to move. The semi-crystalline structure was characteristic of the film. It was found that particles were distributed in the film. Rapid release from plaster gel within 4 h was seen, and this was followed by a period of a slowly declining release rate over 12 h. The accurate first-order kinetic used to estimate the release rate of the formulation. The plaster gel demonstrated greater antibacterial activity than the MIC value indicated. The in vivo evaluation was positive and showed no skin irritation. The formulation showed good stability. Therefore, this indicated that the prepared plaster gel is appropriate for topical pharmaceutical delivery and safe for skin application.

Effect of Al Concentration on Structural, Optical and Electrical Properties of (Gd, Al) Co-Doped ZnO and Its n-ZnO/p-Si (1 0 0) Heterojunction Structures Prepared via Co-Sputtering Method

Heterojunction structures of n-ZnO/p-Si were prepared through the growth of undoped ZnO and (Gd, Al) co-doped ZnO films onto p-type Si (1 0 0) substrates, using a co-sputtering method. The structural and optical properties of the Gd-doped ZnO films were studied as a function of different Al doping concentrations. The X-ray diffraction profiles indicated that the films had a nanocrystalline structure of ZnO with a (0 0 2) preferential orientation. An increase in the Al doping concentration deteriorated the (0 0 2) diffraction peak intensity. The transmittance measurements in the UV-Vis wavelength range indicated that the film's optical gap increased with increase in Al doping concentration. The heterojunction parameters were evaluated using the current-voltage (I-V) characterization carried out of the fabricated n-ZnO/p-Si heterostructure, in dark conditions at room temperature. From these measurements, the n-ZnO-based DMS/p-Si heterojunction diode with the use of (Gd, Al) co-doped ZnO film showed the lowest leakage current of 1.28 × 10^-8 A and an ideality factor η of 1.11, close to the ideal diode behavior of η = 1, compared to the n-Gd-doped ZnO/p-Si and n-undoped ZnO/p-Si heterojunction diodes.

Photophysical Properties of Linear, Net-structured and Branched Polybenzimidazoles

Polybenzimidazoles with three different network structures are synthesized by condensation polymerization between the conventional monomer 3,3'-Diaminobenzidine and three different acid monomers. The synthesised polymer networks are characterized using several characterization techniques such as FT-IR, powder XRD, HR-SEM and TG-DTA analyses. The polybenzimidazoles are amorphous in nature with excellent thermal stability up to 450 ºC. The photophysical properties of polybenzimidazoles are studied using UV-visible absorption and Emission spectral techniques. Further, the excited state photoluminescence decay time measurement shows a functional group dependant decay behaviour. All the three polymers display narrow optical band gap energy and could be applied as a material for solar energy conversion and semiconductors.

Fabrication of high strength and functional GO/PVA/PAN ternary composite fibers by gel spinning

Polyacrylonitrile (PAN) fiber is soft and comfortable, but its poor strength compared to other synthetic fibers has limited it wide range of applications. This study effectively improved the strength of PAN fibers by adding graphene oxide (GO) and polyvinyl alcohol (PVA) during PAN spinning. The composite fibers were prepared via gel spinning and subsequent hot drawing process. The results show that the PVA molecular chains embedded into the PAN molecular chain significantly improved the mechanical properties of the hybrid fiber. At the same time, the defect reduced the UV resistance and thermal stability of the hybrid fibers only when the PVA molecular was introduced in the PAN. Surprisingly, after the recomposition of GO in the above mixed polymer system, the interaction between the GO and matrix not only improved the mechanical properties of the fiber, but also enhanced the UV resistance and thermal stability. In addition, when the amount of GO was 0.3 wt%, the crystallinity of the GO/PVA/PAN composite fiber reached the maximum and the tensile strength was the highest. This strategic approach suggests an effective method to prepare graphene-based ternary composites fibers with high strength and novel functional characteristics.

The incorporation of polypyrrole (PPy) in CS/PVA composite films to enhance the structural, optical, and the electrical conductivity

Using the solution casting method, a blend of polyvinyl alcohol/chitosan (PVA/Cs) blend was prepared with different amounts of polypyrrole (PPy) to enhance the structural and electrical conductivity of the films. The miscibility and interaction between PVA/Cs were confirmed by FT-IR measurements by shifting and disappearing some bands suggesting that the PVA functional group interacted with every other functional group on the Cs side chain. For PVA/Cs/PPy, some band intensities varied, indicating the interaction between PPy and PVA/Cs. XRD showed that the addition of PPy to the blend leads to a noticeable decrease in the intensity of the diffraction peak at 2θ = 20.0° confirming the interactions have occurred between the PVA/Cs mixture and PPy. The UV–visible spectra indicate that increasing the amounts of PPy leads to a dramatic decrease in the energy band gap and an increase in the Urbach energy due to the creation of new energy levels that emerged between conduction and valance bands. After PPy was introduced, the polaron and bipolaron transition peaks at 416, 465, and 560 nm become apparent in the PL spectrum. The dielectric and the electrical properties were reported. The values of ε′ and ε′′ were stronger at low frequencies confirming the possibilities of interface polarization processes. The tan δ behavior diagrams have exhibited one peak trend in all samples shift toward higher frequencies as the temperature and PPy rise. The presence of the peaks was explained based on the electrical conductivity mechanism and dielectric behavior. The Cole–Cole plot displays a half one semicircle shape that explains the absence of contact effects. This semicircle expands as both temperature and PPy increase.

Efficient Photodegradation of Eriochrome Black-T by a Trimetallic Magnetic Self-Synthesized Nanophotocatalyst Based on Zn/Au/Fe-Embedded Poly(vinyl alcohol)

This study presents a novel photocatalytic system for photocatalytic degradation of Eriochrome black-T (EBT) dye via green light-emitting diode (LED) light exposure. This photocatalyst is comprised of nanoscale components, i.e., poly(vinyl alcohol) (PVA), magnetic iron oxide nanoparticles (Fe₃O₄ NPs), gold NPs (Au NPs), and zinc oxide nanorods (ZnO NRs), rendering an active high surface area. The most highlighted property from the structural facet is the superparamagnetic behavior of Fe₃O₄ NPs, which provides a facile collection of magnetic photocatalyst NPs from the reaction flask and is successfully recycled eight times without considerable reduction in catalytic behavior. Briefly, the photocatalytic degradation at its highest efficiency reached 51.4% (10 ppm dye solution, 5.0 mL) and 64.75% (8 ppm dye solution, 5.0 mL) utilizing 10 mg of the designed photocatalyst (formulated as Fe₃O₄@PVA-Au/ZnO), a magnetic photocatalytic system under green LED light (7 W, 526 nm) exposure for 60 min. Besides, the photocatalytic degradation mechanism of the EBT dye by the as-prepared photocatalyst was proposed. Based on the obtained results, the presented photocatalytic method was recommended for scaling up and large-scale exploitation for the purification of the water resources.

Propitious maneuvering for delivery of the phytopharmaceutical "apocynin" to induced fulminant hepatitis in BALB/c mice: In vitro and in vivo assessments

Apocynin (APO), a specific nicotinamide adenine dinucleotide phosphate-oxidase (NADPH-oxidase, NOX) inhibitor, has recently emerged as a bioactive phytochemical with eminent anti-inflammatory and anti-oxidant activities. To our knowledge, no research has been conducted to fabricate a mucoadhesive nanostructured delivery system of APO that targets the liver. Accordingly, chitosan (CS) surface decorated polymeric nanoparticulate delivery system (PNDS) was victoriously fabricated by double emulsion-solvent evaporation method. Herein, a randomized full 33 factorial design was employed to assess the impact of the independently processing parameters (IPPs) namely; (poly(d,l-lactide-co-glycolide) (PLGA) amount (A)), (polyvinyl alcohol (PVA) concentration (B)), and (CS concentration (C)), on different dependently measured attributes (DMAs). The optimal APO-loaded chitosan-coated poly(d,l-lactide-co-glycolide) nanoparticles (APO-loaded CS-coated PLGA NPs) formula (F19) would be extensively appraised through meticulous in vitro-in vivo studies. Crucially, the results revealed that oral pre-treatment with the optimal formula evoked a prodigious in vivo hepatoprotective efficacy against lipopolysaccharide (LPS)/D-(+)-galactosamine (D-GalN) induced fulminant hepatitis (FH) in BALB/c mice when compared with pure APO, uncoated F19, and plain NPs (P NPs) pretreated groups. In conclusion, APO-loaded CS-coated PLGA NPs could be considered as a promising oral mucoadhesive phytopharmaceutical PNDS to open new prospects for therapeutic intervention in inflammatory based liver diseases.

Synthesis and Characterization of Chelating Hyperbranched Polyester Nanoparticles for Cd(II) Ion Removal from Water

Chelating hyperbranched polyester (CHPE) nanoparticles have become an attractive new material family for developing high-capacity nanoscale chelating agents with highly branched structures and many functional groups in the main chains and end groups that can be used to remove heavy metals from water. In this study, a hyperbranched polyester with a particle size of 180–643 nm was synthesized with A₂+B₃ interfacial polymerization, using dimethylmalonyl chloride as the difunctional monomer (A₂) and 1,1,1-tris(4-hydroxyphenyl)ethane (THPE) as the trifunctional monomer (B₃). FTIR and NMR were used to characterize the CHPE and confirm the structure. The CHPE nanoparticles were generally considered hydrophilic, with an observed swelling capacity of 160.70%. The thermal properties of the CHPE nanoparticles were studied by thermal gravimetric analysis (TGA) with 1% mass loss at temperatures above 185 °C. The XRD of the CHPE nanoparticles showed a semi-crystalline pattern, as evident from the presence of peaks at positions ~18° and 20°. The nature of the surface of the CHPE was examined using SEM. Batch equilibrium was used to investigate the removal properties of the CHPE nanoparticles towards Cd(II) ions as a function of temperature, contact time, and Cd(II) concentration. The Cd(II) ion thermodynamics, kinetics, and desorption data on the CHPE nanoparticles were also studied.

Microstructure Study and Linear/Nonlinear Optical Performance of Bi-Embedded PVP/PVA Films for Optoelectronic and Optical Cut-Off Applications

Hybrid polymer films of polyvinyl pyrrolidone (PVP)/polyvinyl alcohol (PVA) embedded with gradient levels of Bi-powder were prepared using a conventional solution casting process. XRD, FTIR, and SEM techniques have been used to examine the micro/molecular structure and morphology of the synthesized flexible films. The intensities of the diffraction peaks and transmission spectrum of the PVP/PVA gradually declined with the introduction of Bi-metal. In addition, filler changes the microstructure surface of the pure film. The modification in the microstructure leads to an enhancement in the optical absorption characteristic of the blend films. The indirect allowed transition energy was calculated via Tauc’s and ASF (Absorption Spectra Fitting) models. The decrease in the hybrid film’s bandgap returns to the localized states in the forbidden region, which led the present films to be suitable for photo-electric, solar cell, etc., applications. The relation between the transition energy and the refractive index was studied. The enhancement in the refractive index with Bi-metal concentrations led to use the as-prepared films in optical sensors. The rise of Bi-metal concentrations leads also to the improvement of the nonlinear susceptibility and refractive parameters. The optical limiting characteristics revealed that the higher concentration dopant films reduce the light transmission intensity which is appropriate for laser attenuation and optical limiting in photonic devices. The results suggest that hybrid films are promising materials in a wide range of opto-electronic applications.

An Investigation into the PVA:MC:NH4Cl-Based Proton-Conducting Polymer-Blend Electrolytes for Electrochemical Double Layer Capacitor (EDLC) Device Application: The FTIR, Circuit Design and Electrochemical Studies

In this report, the preparation of solid polymer electrolytes (SPEs) is performed from polyvinyl alcohol, methyl cellulose (PVA-MC), and ammonium chloride (NH₄Cl) using solution casting methodology for its use in electrical double layer capacitors (EDLCs). The characterizations of the prepared electrolyte are conducted using a variety of techniques, including Fourier transform infrared spectroscopy (FTIR), electrical impedance spectroscopy (EIS), cyclic voltammetry (CV), and linear sweep voltammetry (LSV). The interaction between the polymers and NH₄Cl salt are assured via FTIR. EIS confirms the possibility of obtaining a reasonably high conductance of the electrolyte of 1.99 × 10⁻³ S/cm at room temperature. The dielectric response technique is applied to determine the extent of the ion dissociation of the NH₄Cl in the PVA-MC-NH₄Cl systems. The appearance of a peak in the imaginary part of the modulus study recognizes the contribution of chain dynamics and ion mobility. Transference number measurement (TNM) is specified and is found to be (t_ion) = 0.933 for the uppermost conducting sample. This verifies that ions are the predominant charge carriers. From the LSV study, 1.4 V are recorded for the relatively high-conducting sample. The CV curve response is far from the rectangular shape. The maximum specific capacitance of 20.6 F/g is recorded at 10 mV/s.

Serendipity discovery of fire early warning function of chitosan film

Transparent chitosan (CS) film is prepared and its application in high temperature/fire warning is discussed. NaCl-doped chitosan (CS-NaCl) film shows excellent performance in real-time temperature monitoring and fire warning. The temperature warning of CS-NaCl film can be triggered under approximately 50 °C, and it has a good repeatable warning performance under high-temperature conditions. The CS composite film exhibits an ultra-sensitive (0.4 s) warning under fire attacking. A possible electrical conduction and fire-alarm mechanisms are proposed. The addition of NaCl increases the number of charge carriers, which improves the ionic conductivity of the composite film. This study provides a possibility for the application of CS in the field of fire warning.

Properties of the PVA-VAVTD KOH Blend as a Gel Polymer Electrolyte for Zinc Batteries

Rechargeable zinc-air batteries are promising for energy storage and portable electronic applications because of their good safety, high energy density, material abundance, low cost, and environmental friendliness. A series of alkaline gel polymer electrolytes formed from polyvinyl alcohol (PVA) and different amounts of terpolymer composed of butyl acrylate, vinyl acetate, and vinyl neodecanoate (VAVTD) was synthesized applying a solution casting technique. The thin films were doped with KOH 12M, providing a higher amount of water and free ions inside the electrolyte matrix. The inclusion of VAVTD together with the PVA polymer improved several of the electrical properties of the PVA-based gel polymer electrolytes (GPEs). X-ray diffraction (XRD), thermogravimetric analysis (TGA), and attenuated total reflectance- Fourier-transform infrared spectroscopy (ATR-FTIR) tests, confirming that PVA chains rearrange depending on the VAVTD content and improving the amorphous region. The most conducting electrolyte film was the test specimen 1:4 (PVA-VAVTD) soaked in KOH solution, reaching a conductivity of 0.019 S/cm at room temperature. The temperature dependence of the conductivity agrees with the Arrhenius equation and activation energy of ~0.077 eV resulted, depending on the electrolyte composition. In addition, the cyclic voltammetry study showed a current intensity increase at higher VAVTD content, reaching values of 310 mA. Finally, these gel polymer electrolytes were tested in Zn-air batteries, obtaining capacities of 165 mAh and 195 mAh for PVA-T4 and PVA-T5 sunk in KOH, respectively, at a discharge current of -5 mA.

Characteristics of Plasticized Lithium Ion Conducting Green Polymer Blend Electrolytes Based on CS: Dextran with High Energy Density and Specific Capacitance

The solution cast process is used to set up chitosan: dextran-based plasticized solid polymer electrolyte with high specific capacitance (228.62 F/g) at the 1st cycle. Fourier-transform infrared spectroscopy (FTIR) pattern revealed the interaction between polymers and electrolyte components. At ambient temperature, the highest conductive plasticized system (CDLG-3) achieves a maximum conductivity of 4.16 × 10^-4 S cm^-1. Using both FTIR and electrical impedance spectroscopy (EIS) methods, the mobility, number density, and diffusion coefficient of ions are measured, and they are found to rise as the amount of glycerol increases. Ions are the primary charge carriers, according to transference number measurement (TNM). According to linear sweep voltammetry (LSV), the CDLG-3 system's electrochemical stability window is 2.2 V. In the preparation of electrical double layer capacitor devices, the CDLG-3 system was used. There are no Faradaic peaks on the cyclic voltammetry (CV) curve, which is virtually rectangular. Beyond the 20th cycle, the power density, energy density, and specific capacitance values from the galvanostatic charge-discharge are practically constant at 480 W/Kg, 8 Wh/Kg, and 60 F g^-1, for 180 cycles.

A Study of Methylcellulose Based Polymer Electrolyte Impregnated with Potassium Ion Conducting Carrier: Impedance, EEC Modeling, FTIR, Dielectric, and Device Characteristics

In this research, a biopolymer-based electrolyte system involving methylcellulose (MC) as a host polymeric material and potassium iodide (KI) salt as the ionic source was prepared by solution cast technique. The electrolyte with the highest conductivity was used for device application of electrochemical double-layer capacitor (EDLC) with high specific capacitance. The electrical, structural, and electrochemical characteristics of the electrolyte systems were investigated using various techniques. According to electrochemical impedance spectroscopy (EIS), the bulk resistance (R_b) decreased from 3.3 × 10⁵ to 8 × 10² Ω with the increase of salt concentration from 10 wt % to 40 wt % and the ionic conductivity was found to be 1.93 ×10^-5 S/cm. The dielectric analysis further verified the conductivity trends. Low-frequency regions showed high dielectric constant, ε' and loss, ε″ values. The polymer-salt complexation between (MC) and (KI) was shown through a Fourier transformed infrared spectroscopy (FTIR) studies. The analysis of transference number measurement (TNM) supported ions were predominantly responsible for the transport process in the MC-KI electrolyte. The highest conducting sample was observed to be electrochemically constant as the potential was swept linearly up to 1.8 V using linear sweep voltammetry (LSV). The cyclic voltammetry (CV) profile reveals the absence of a redox peak, indicating the presence of a charge double-layer between the surface of activated carbon electrodes and electrolytes. The maximum specific capacitance, C_s value was obtained as 118.4 F/g at the sweep rate of 10 mV/s.

Degradation Monitoring of HDPE Material in CO2-Saturated NaCl Environment through Electrochemical Impedance Spectroscopy Technique

Extensive damage due to saturated seawater and CO2 exposure under high temperature and pressure in high-density polyethylene (HDPE) has been studied by Infrared Spectroscopy (FTIR), Differential Scanning Calorimetry (DSC), Thermogravimetric Analysis (TGA), Field Emission Scanning Electron Microscope (FESEM), and Electrochemical Impedance Spectroscopy (EIS). The degradation of square-shaped HDPE samples having 1 mm thickness was investigated at 70 bars with 60, 75, and 90 °C separately for three weeks in an autoclave chamber. A clear indication of aging was observed in terms of chain scission by the formation of the methyl group (1262 cm-1), and the appearance of degradation products, including the alcohol and hydroxyl groups. The decline in glass transition temperature (Tg), melting point (Tm), and crystallinity (Xc) result from branching and formation of degradation products in the aged samples. TGA results reveal that the degradation shifts the characteristic temperatures (T5% and T10%) to lower values compared to virgin HDPE. FESEM images show clear surface cracks and rough patches after 3 weeks. The Xc value increased due to chain mobility at higher temperatures (90 °C). The impedance is relatively high 1011 ohms.cm-2 for a virgin sample, but it drops down to 109 and 106 after degradation. Impedance and dielectric loss were correlated, and the significance of dielectric loss was observed at lower frequencies. These characterizations will contribute to more efficient and detailed evaluation criteria for degradation monitoring.

Metal Doped PVA Films for Opto-Electronics-Optical and Electronic Properties, an Overview

Polyvinyl alcohol is unique among polymers. Apart from its preparation, it is not built up in polymerization reactions from monomers, unlike most vinyl-polymers, and it is biodegradable in the presence of suitably acclimated microorganisms. It is an environmentally friendly material for a wide range of applications, from medical ones, based on its biocompatibility, to integrated optics. This paper reviews, in addition to the preparation and optimization of films of polyvinyl alcohol doped with different metal species, the role of dopants and doping technologies in the involved electronic mechanism. The optical properties were studied by UV-VIS-IR, Mössbauer spectroscopy, and other measurement techniques, with applications such as real-time holography, microlasers, optical sensors or nanophotonics in mind.

Characteristics of a Plasticized PVA-Based Polymer Electrolyte Membrane and H+ Conductor for an Electrical Double-Layer Capacitor: Structural, Morphological, and Ion Transport Properties

Poly (vinyl alcohol) (PVA)-based solid polymer electrolytes doped with ammonium thiocyanate (NH4SCN) and glycerol were fabricated using a solution casting method. Lithium-based energy storage devices are not environmentally friendly materials, and they are toxic. Thus, proton-conducting materials were used in this work as they are harmless and are smaller than lithium. The interaction between PVA and the electrolyte elements was shown by FTIR analysis. The highest conductivity of 1.82 × 10-5 S cm-1 was obtained by the highest-conducting plasticized system (PSP_2) at room temperature. The mobility, diffusion coefficient, and number density of anions and cations were found to increase with increasing glycerol. FESEM was used to investigate the influence of glycerol on film morphology. TNM showed that the cations and anions were the main charge carriers. LSV showed that the electrochemical stability window of the PSP_2 system was 1.99 V. The PSP_2 system was applied in the preparation of an electrical double layer capacitor device. The shape of the cyclic voltammetry (CV) curve was nearly rectangular with no Faradaic peaks. From the galvanostatic charge-discharge analysis, the power density, energy density, and specific capacitance values were nearly constant beyond the first cycle at 318.73 W/Kg, 2.06 Wh/Kg, and 18.30 F g-1, respectively, for 450 cycles.

Bio-Based Plasticized PVA Based Polymer Blend Electrolytes for Energy Storage EDLC Devices: Ion Transport Parameters and Electrochemical Properties

This report shows a simple solution cast methodology to prepare plasticized polyvinyl alcohol (PVA)/methylcellulose (MC)-ammonium iodide (NH₄I) electrolyte at room temperature. The maximum conducting membrane has a conductivity of 3.21 × 10^-3 S/cm. It is shown that the number density, mobility and diffusion coefficient of ions are enhanced by increasing the glycerol. A number of electric and electrochemical properties of the electrolyte-impedance, dielectric properties, transference numbers, potential window, energy density, specific capacitance (C_s) and power density-were determined. From the determined electric and electrochemical properties, it is shown that PVA: MC-NH₄I proton conducting polymer electrolyte (PE) is adequate for utilization in energy storage device (ESD). The decrease of charge transfer resistance with increasing plasticizer was observed from Bode plot. The analysis of dielectric properties has indicated that the plasticizer is a novel approach to increase the number of charge carriers. The electron and ion transference numbers were found. From the linear sweep voltammetry (LSV) response, the breakdown voltage of the electrolyte is determined. From Galvanostatic charge-discharge (GCD) measurement, the calculated C_s values are found to drop with increasing the number of cycles. The increment of internal resistance is shown by equivalent series resistance (ESR) plot. The energy and power density were studied over 250 cycles that results to the value of 5.38-3.59 Wh/kg and 757.58-347.22 W/kg, respectively.

Chitosan and chitosan/PEG nanoparticles loaded with indole-3-carbinol: Characterization, computational study and potential effect on human bladder cancer cells

Indole-3-carbinol (I3C) is a plant molecule known to be active against several types of cancer, but some chemical characteristics limit its clinical applications. In order to overcome these limitations, polymeric nanoparticles can be used as carrier systems for targeted delivery of I3C. In this study, chitosan and chitosan/polyethylene glycol nanoparticles (CS NP and CS/PEG NP, respectively) were prepared to encapsulate I3C by ionic gelation method. The polymeric nanoparticles were characterized by Dynamic Scattering Light (DLS), Zeta Potential (ZP), Fourier Transform Infrared (FTIR) spetroscopy, X-Ray Diffraction (XRD), Thermogravimetric Analysis (TGA), Differential Scanning Calorimetry (DSC), and Field Emission Gun Scanning Electron Microscopy (FEG-SEM). I3C release testing was performed at an acidic media and the interactions between I3C and chitosan or PEG were evaluated by Density Functional Theory (DFT). Cytotoxicity of nanoparticles in bladder cancer T24 cell line was evaluated by the Methyl-thiazolyl-tetrazolium (MTT) colorimetric assay. The average size of the nanoparticles was observed to be in the range from 133.3 ± 3.7 nm to 180.4 ± 2.7 nm with a relatively homogeneous distribution. Samples had relatively high positive zeta potential values (between +20.3 ± 0.5 mV and + 24.3 ± 0.5 mV). Similar encapsulation efficiencies (about 80%) for both nanoparticles were obtained. Physicochemical and thermal characterizations pointed to the encapsulation of I3c. electron microscopy showed spherical particles with smooth or ragged surface characteristics, depending on the presence of PEG. The mathematical fitting of the release profile demonstrated that I3C-CS NP followed the Higuchi model whereas I3C-CS/PEG NP the Korsmeyer-Peppas model. Chemical differences between the nanoparticles as based on the I3C/CS or I3C/PEG interactions were demonstrate by computational characterization. The assessment of cell viability by the MTT test showed that the presence of both free I3C and I3C-loaded nanoparticles lead to statistically significant reduction in T24 cells viability in the concentrations from 500 to 2000 μM, when comparison to the control group after 24 h of exposure. Thus, CS and CS/PEG nanoparticles present as feasible I3C carrier systems for cancer therapy.