Study on the Development of Antiviral Spandex Fabric Coated with Poly(hexamethylene biguanide) Hydrochloride (PHMB)

Antiviral Efficacy Testing of a Rechargeable Textile

INTRODUCTION

In light of the COVID-19 (Coronovirus Disease 2019) pandemic, the use of personal protective equipment has become essential to reduce viral transmission and maintain public health. Viruses, particularly human coronavirus and influenza, pose significant challenges because of their various transmission routes. UMF Corporation's innovation, Micrillon, aims to address these challenges by creating durable, antiviral technology for textiles without harmful chemicals, reducing viral transmission risks.

MATERIALS AND METHODS

The study followed ISO Standard 18184:2019, testing Micrillon textiles against Human Coronavirus OC43 and H1N1 Influenza A virus using MDCK and HCT-8 cell lines. Cell propagation, viral application, TCID50 (Median Tissue Culture Infectious Dose) testing, and maintenance protocols were rigorously implemented to assess antiviral efficacy.

RESULTS

Micrillon gloves, fabrics, and fibers exhibited high antiviral efficacy against both viruses across various contact times. Gloves demonstrated exceptional antiviral activity against H1N1 (99.88%) and OC43 (99.67%) at 120 minutes. Rolled fabrics showed strong efficacy against H1N1 (99.42% at 30 minutes) and OC43 (>97%) at all time points. Bundled fibers displayed substantial efficacy against H1N1 (99.17% at 120 minutes) and OC43 (>98%) at all time points.

CONCLUSIONS

The study demonstrates that Micrillon technology effectively inhibits viral activity, particularly in gloves, fabrics, and fibers. The innovation not only shows high antiviral efficacy against both Human Coronavirus and Influenza but also promises a reusable, sustainable solution, mitigating environmental impact and reducing the use of harmful chemicals in personal protective equipment. The technology holds promise for widespread use in health care and hospitality, offering a layer of protection while being environmentally conscious. Further development of such technologies can significantly reduce infection risks while minimizing environmental harm.

Biodegradable gelatin/pectin films containing cellulose nanofibers and biguanide polymers: Characterization and application in sweet cherry packaging

To expand the utilization of gelatin and pectin derived from agricultural by-products, the composite films composed of gelatin, citrus pectin, cellulose nanofibers (CNF), and polyhexamethylene biguanide hydrochloride (PHMB) were prepared through the solvent casting method. Fourier infrared spectroscopy analysis verified the successful integration of CNF and PHMB into the gelatin-pectin matrix. The incorporation of CNF as a reinforcing agent substantially enhanced the barrier capabilities of the composite film. Moreover, the addition of PHMB, functioning as an antimicrobial agent, not only granted the film with antibacterial properties but also improved its physical characteristics and biodegradability. A water contact angle experiment revealed the film presented a certain degree of hydrophobicity. The optimal performances were attained with a composition in which CNF and PHMB constituted 8 % and 3 %, respectively, of the total weight of gelatin and pectin. As a packaging film, the composite film demonstrated its effectiveness by reducing the decay index and weight loss rate of sweet cherries during a 12-day storage period. In the soil degradation test, the composite film exhibited notable structural degradation by the 16th day. Consequently, the composite film will be used as an innovative and biodegradable packaging material to provide a sustainable solution for food packaging industries.

Synergistic Polymer Coatings with Antibacterial and Antiviral Properties for Healthcare Applications

The role of frequently touched surfaces in the transmission of infectious diseases is well-documented, and the urgent need for effective surface technologies with antipathogen activity has been highlighted by the recent global pandemic and rise in antimicrobial resistance. Here, we have explored combinations of up to 3 different classes of compounds within a polymeric matrix to enable the fabrication of coatings with broad-spectrum activity. Compounds were either based on metals or metal oxides, namely, copper, silver, and copper oxide, essential oils, namely, cinnamaldehyde, tea tree oil, and carvacrol oil, or cationic polymers, namely, poly(ε-lysine) and poly(hexamethylene biguanide). These compounds were mixed into a polymer matrix, coated, and dried to yield durable coatings. Coatings containing up to 7.5% (w/w) of the compounds were assessed in the zone of inhibition and biofilm assays using Staphylococcus aureus and Pseudomonas aeruginosa, as well as infectivity assays using human coronavirus OC43. Our data demonstrate that a selected combination of additives was able to provide a 5-log reduction in the colony-forming units of both bacteria and a 4-log reduction in viral infectivity. This simple but highly effective technology is expected to find applications in environments such as hospitals, aged care facilities, or public transport.

Bioactive Lyocell Fibers with Inherent Antibacterial, Antiviral and Antifungal Properties

Functional Lyocell fibers gain interest in garments and technical textiles, especially when equipped with inherently bioactive features. In this study, Lyocell fibers are modified with an ion exchange resin and subsequently loaded with copper (Cu) ions. The modified Lyocell process enables high amounts of the resin additive (>10%) through intensive dispersion and subsequently, high uptake of 2.7% Cu throughout the whole cross-section of the fiber. Fixation by Na2CO3 increases the washing and dyeing resistance considerably. Cu content after dyeing compared to the original fiber value amounts to approx. 65% for reactive, 75% for direct, and 77% for HT dyeing, respectively. Even after 50 household washes, a recovery of 43% for reactive, 47% for direct and 26% for HT dyeing is proved. XRD measurements reveal ionic bonding of Cu fixation inside the cellulose/ion exchange resin composite. A combination of the fixation process with a change in Cu valence state by glucose/NaOH leads to the formation of Cu2O crystallites, which is proved by XRD. Cu fiber shows a strong antibacterial effect against Staphylococcus aureus and Klebsiella pneumonia bacteria, even after 50 household washing cycles of both >5 log CFU. In nonwoven blends with a share of only 6% Cu fiber, a strong antimicrobial (CFU > log 5) and full antiviral effectiveness (>log 4) was received even after 50 washing cycles. Time-dependent measurements already show strong antiviral behavior after 30 s. Further, the fibers show an increased die off of the fungal isolate Candida auris with CFU log 4.4, and nonwovens made from 6% Cu fiber share a CFU log of 1.7. Findings of the study predestines the fiber for advanced textile processing and applications in areas with high germ loads.

Nonleaching Biocidal N-Halamine-Functionalized Polyamine-, Guanidine-, and Hydantoin-Based Coatings

Fibrous materials with inherent antimicrobial properties can help in real-time deactivation of microorganisms, enabling multiple uses while reducing secondary infections. Coatings with antiviral polymers enhance the surface functionality for existing and potential future pandemics. Herein, we demonstrated a straightforward route toward biocidal surface creation using polymers with nucleophilic biguanide, guanidine, and hydantoin groups that are covalently attached onto a solid support. Biocidal poly(N-vinylguanidine) (PVG) and poly(allylamine-co-4-aminopyridine-co-5-(4-hydroxybenzylidene)hydantoin) (PAH) were introduced for coating applications along with commercially available polyvinylamine (PVAm) and poly(hexamethylene biguanide) (PHMB). Nonleaching coatings were created by first fabricating bifunctional siloxane or isocyanate precursor coatings on the cotton, nylon-cotton, and glass fiber fabric, followed by the polymer attachment. The developed grafting methods ensured the stability of the coating and the reuse of the material while maintaining the biocidal properties. Halogenation of polymer-coated fabric was conducted by aqueous solutions of sodium hypochlorite or in situ generation of hypobromous acid (HOBr), resulting in surfaces coated by N-halamines with high contents of active > N-Cl or > N-Br groups. The polymer-coated fabrics were stable in multiple laundry cycles and maintained hydrophilic character after coating and halogenation. Halogenated polymer-coated fabrics completely inactivated human respiratory coronavirus based on a contact-killing mechanism and were shown to be reusable after recharging with bromine or chlorine.

Antiviral and Antibacterial 3D-Printed Products Functionalised with Poly(hexamethylene biguanide)

Infection prevention and public health are a vital concern worldwide, especially during pandemics such as COVID-19 and seasonal influenza. Frequent manual disinfection and use of chemical spray coatings at public facilities are the typical measures taken to protect people from coronaviruses and other pathogens. However, limitations of human resources and coating durability, as well as the safety of disinfectants used are the major concerns in society during a pandemic. Non-leachable antimicrobial agent poly(hexamethylene biguanide) (PHMB) was mixed into photocurable liquid resins to produce novel and tailor-made covers for public facilities via digital light processing, which is a popular 3D printing technique for satisfactory printing resolution. Potent efficacies of the 3D-printed plastics were achieved in standard antibacterial assessments against S. aureus, E. coli and K. pneumoniae. A total of 99.9% of Human coronavirus 229E was killed after being in contact with the 3D-printed samples (containing the promising PHMB formulation) for two hours. In an eight-week field test in Hong Kong Wetland Park, antibacterial performances of the specially designed 3D-printed covers analysed by environmental swabbing were also found to be satisfactory. With these remarkable outcomes, antimicrobial products prepared by digital light processing 3D printing can be regarded as a reliable solution to long-term infection prevention and control.

The impact of bioactive textiles on human skin microbiota

In order to support the elevated market demand for the development of textiles with specific benefits for a healthy and safe lifestyle, several bioactive textiles with defined properties, including antimicrobial, antioxidant, anti-inflammatory, anti-odor, and anti-repellent, anti-ultraviolet (UV) radiation, have been proposed. Antimicrobial textiles, particularly, have received special interest considering the search for smart, protective textiles that also impact health and well-being. Although the incorporation of antimicrobials into textile material has been well succeeded, the addition of such components in textile clothing can influence the balance of the skin microbiota of the wearer. While most antimicrobial textiles have demonstrated good biocompatibility and antimicrobial performance against bacteria, fungi, and viruses, some problems such as textile biodegradation, odor, and dissemination of unwanted microorganisms might arise. However, little is known about the impact of such antimicrobial textile-products on human skin microbiota. To address this issue, the present review, for the first time, gives an overview about the main effects of antimicrobial textiles, i.e., antibacterial, antifungal, and antiviral, on skin microbiota while driving future investigation to elucidate their putative clinical relevance and possible applications according to their impact on skin microbiota. This knowledge may open doors for the development of more microbiota friendly textiles or antimicrobial textile-products able to target specific populations of the skin microbiota aiming to alleviate skin disorders, malodor, and allergies by avoiding the growth and spread of pathogenic microorganisms.

Longitudinal Study on the Antimicrobial Performance of a Polyhexamethylene Biguanide (PHMB)-Treated Textile Fabric in a Hospital Environment

Healthcare workers in the hospital environment are at risk of infection and body fluids such as saliva, bacterial contamination, oral bacteria, etc. directly or indirectly exacerbate this issue. These bio-contaminants, when adhered to hospital linens and clothing, grow substantially, as conventional textile products provide a favorable medium for bacterial and viral growth, adding to the risk of transmitting infectious diseases in the hospital environment. Textiles with durable antimicrobial properties prevent microbial colonization on their surfaces and help contain the spread of pathogens. This longitudinal study aimed to investigate the antimicrobial performance of PHMB-treated healthcare uniforms during prolonged usage and repetitive laundry cycles in a hospital environment. The PHMB-treated healthcare uniforms displayed non-specific antimicrobial properties and remained efficient (>99% against S. aureus and K. pneumoniae) after use for 5 months. With the fact that no antimicrobial resistance was reported towards PHMB, the presented PHMB-treated uniform may reduce infection in hospital settings by minimizing the acquisition, retention, and transmission of infectious diseases on textile products.

Functional Textile Materials for Blocking COVID-19 Transmission

The outbreak of COVID-19 provided a warning sign for society worldwide: that is, we urgently need to explore effective strategies for combating unpredictable viral pandemics. Protective textiles such as surgery masks have played an important role in the mitigation of the COVID-19 pandemic, while revealing serious challenges in terms of supply, cross-infection risk, and environmental pollution. In this context, textiles with an antivirus functionality have attracted increasing attention, and many innovative proposals with exciting commercial possibilities have been reported over the past three years. In this review, we illustrate the progress of textile filtration for pandemics and summarize the recent development of antiviral textiles for personal protective purposes by cataloging them into three classes: metal-based, carbon-based, and polymer-based materials. We focused on the preparation routes of emerging antiviral textiles, providing a forward-looking perspective on their opportunities and challenges, to evaluate their efficacy, scale up their manufacturing processes, and expand their high-volume applications. Based on this review, we conclude that ideal antiviral textiles are characterized by a high filtration efficiency, reliable antiviral effect, long storage life, and recyclability. The expected manufacturing processes should be economically feasible, scalable, and quickly responsive.

Didecyldimethylammonium Chloride- and Polyhexamethylene Guanidine-Resistant Bacteria Isolated from Fecal Sludge and Their Potential Use in Biological Products for the Detoxification of Biocide-Contaminated Wastewater Prior to Conventional Biological Treatment

Simple Summary

Every year, more than a million tons of fecal sludge (FS) containing biocides based on quaternary ammonium compounds and guanidine derivatives, which are widely used for FS deodorization and control of microbial activity, are generated in the environmentally safe toilet complexes of Russian Railways trains. Higher disposal costs for such biocide-contaminated FS due to activated sludge toxicity increases pressure on sanitary equipment servicing companies («Ecotol Service» LLC) to more efficiently discharge FS to wastewater treatment plants. In this work, we have developed a new environmentally friendly approach to reducing the toxicity of FS, based on the use of biological products from biocide-resistant bacterial strains isolated from FS. Our approach has proven to be effective in a series of FS biodegradation experiments, biological oxygen demand tests, and a newly developed disk-diffusion bioassay.

Abstract

Toxic shock caused by the discharge of biocide-contaminated fecal sludge (FS) from chemical toilets to conventional wastewater treatment plants (WWTP) can be a major problem in activated sludge operation. It is necessary to develop new environmental approaches to mitigate the toxicity of biocides in order to avoid degrading the performance of WWTP. “Latrina”, a chemical toilet additive containing didecyldimethylammonium chloride and polyhexamethylene guanidine, is widely used in environmentally safe toilet complexes (ESTC) on Russian railway trains to deodorize FS and control microbial activity. In this work, seven biocide-resistant bacterial strains were isolated and identified from the FS of ESTC. The values of the minimum inhibitory and bactericidal concentrations of biocides for the isolated strains were 4.5–10 times higher than for the collection microorganisms. The bacterium Alcaligenes faecalis DOS7 was found to be particularly resistant to “Latrina”, the minimum inhibitory concentration of which was almost 30 times higher than recommended for ESTC. Biological products based on isolated bacterial strains proved to be effective for FS biodegradation under both aerobic and anaerobic conditions. The results of the biochemical oxygen demand test and the newly developed disk-diffusion bioassay confirmed that isolated strains contribute to reducing toxicity of biocidal agents in FS. Hyper-resistance, non-pathogenicity, and potential plant growth-promoting ability make A. faecalis DOS7 promising for use in various biological products for wastewater treatment and bioremediation of soils contaminated with biocides, as well as in agriculture to increase plant productivity.

An Investigation into the Adsorption Mechanism of Organic Anions on a New Spandex

In recent years, there has been significant interest in the study of spandex in high-elasticity sensors. As a new kind of special spandex, dyeable spandex shows strong adsorption capacity for anions. In this study, neutral red G was used as an anion adsorption simulator to study the adsorption mechanism of dyeable spandex on anionic materials. The structure of dyeable spandex was characterized by the modern instrumental analysis method, and the adsorption kinetics and thermodynamics of neutral red G on dyeable spandex were discussed. The results show that the use of mixed amines as chain extenders for dyeable spandex reduced the regularity of molecules and the crystallinity of spandex, which was beneficial to the diffusion adsorption of anions. On the other hand, the number of secondary amino groups increased, providing more adsorption sites under acidic conditions. The adsorption of neutral red G on dyeable spandex satisfied the quasi-second-order kinetics and the Langmuir adsorption model, indicating that dye adsorption on spandex was mainly electrostatic. The diffusion coefficient and equilibrium adsorption capacity of neutral red G on dyeable spandex increased significantly, whereas enthalpy and entropy decreased.

Rapid Method to Quantify the Antiviral Potential of Porous and Nonporous Material Using the Enveloped Bacteriophage Phi6

The pandemic revealed significant gaps in our understanding of the antiviral potential of porous textiles used for personal protective equipment and nonporous touch surfaces. What is the fate of a microbe when it encounters an abiotic surface? How can we change the microenvironment of materials to improve antimicrobial properties? Filling these gaps requires increasing data generation throughput. A method to accomplish this leverages the use of the enveloped bacteriophage ϕ6, an adjustable spacing multichannel pipette, and the statistical design opportunities inherent in the ordered array of the 24-well culture plate format, resulting in a semi-automated small drop assay. For 100 mm² nonporous coupons of Cu and Zn, the reduction in ϕ6 infectivity fits first-order kinetics, resulting in half-lives (T₅₀) of 4.2 ± 0.1 and 29.4 ± 1.6 min, respectively. In contrast, exposure to stainless steel has no significant effect on infectivity. For porous textiles, differences associated with composition, color, and surface treatment of samples are detected within 5 min of exposure. Half-lives for differently dyed Zn-containing fabrics from commercially available masks ranged from 2.1 ± 0.05 to 9.4 ± 0.2 min. A path toward full automation and the application of machine learning techniques to guide combinatorial material engineering is presented.