Biosorption of B-aflatoxins Using Biomasses Obtained from Formosa Firethorn [Pyracantha koidzumii (Hayata) Rehder]

Highly efficient adsorptive removal of the carcinogen aflatoxin B1 using the parasitic plant Cuscuta corymbosa Ruiz & Pavon

The ever-growing consumption of herbs around the globe has motivated the researchers to acquire practical knowledge about other potential applications in human and animal health. In this research, an unmodified adsorbent prepared from the holoparasitic herb C. corymbosa was utilized for the removal of the carcinogen aflatoxin B1 (AFB1) from aqueous solutions. The adsorbent was characterized by Fourier transform near-infrared/mid-infrared spectrophotometry (FT-NIR/MIR), environmental scanning electron microscopy (ESEM), energy-dispersive X-ray fluorescence spectroscopy (EDX), X-ray diffraction (XRD), and point of zero charge (pHpzc). Adsorption experiments were carried out in batch systems, and the experimental data was used for isothermal (Langmuir and Freundlich) and kinetic (linear and non-linear forms of the pseudo-first and pseudo-second order) models. In general, the unmodified adsorbent removed AFB1 independent of the solution pH, showing a theoretical adsorption capacity of 555.76 mg AFB1/g at 303 K, significantly higher than that reported for other plant-based adsorbents and comparable with the efficiency of various inorganic adsorbents. Non-electrostatic attractions such as hydrogen bonding and dispersion forces along with complexation mechanisms were the primary interactions responsible for the adsorption of the pollutant. Our results clearly show that C. corymbosa could be a promising material for practical adsorption applications in the drinking water industry.

Removal of Aflatoxin B1 Using Alfalfa Leaves as an Adsorbent Material: A Comparison between Two In Vitro Experimental Models

An adsorbent material derived from alfalfa leaves was prepared and further characterized, and its efficacy for removing aflatoxin B1 (AFB1) was investigated. Characterization consisted of the use of attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), environmental scanning electron microscopy (ESEM), X-ray fluorescence spectroscopy (XRF), X-ray diffraction (XRD), point of zero charge (pHpzc), zeta potential (ζ-potential), UV-Vis diffuse reflectance spectroscopy, and spectral analysis. To determine the adsorption capacity against AFB1 (250 ng AFB1/mL), pH-dependent and avian intestinal in vitro models were used. The adsorbent inclusion percentage was 0.5% (w/w). In general, the pH-dependent model gave adsorption percentages of 98.2%, 99.9%, and 98.2%, evaluated at pH values of 2, 5, and 7, respectively. However, when the avian intestinal model was used, it was observed that the adsorption percentage of AFB1 significantly decreased (88.8%). Based on the characterization results, it is proposed that electrostatic, non-electrostatic, and the formation of chlorophyll-AFB1 complexes were the main mechanisms for AFB1 adsorption. From these results, it can be concluded that the adsorbent derived from alfalfa leaves could be used as an effective material for removing AFB1 in in vitro digestion models that mimic the physiological reality.

Optimization of aflatoxin B1 removal efficiency of DNA by resonance light scattering spectroscopy

In this paper, firstly, the resonance light scattering spectra of aflatoxin B₁ (AFB₁) and DNA were measured by resonance light scattering spectroscopy (RLS), and the DNA binding saturation value (DBSV) of AFB₁ was calculated from their spectral results. Then the interaction intensity between DNA and AFB₁ and the effects of some external factors on the interaction between DNA and AFB₁ were evaluated by corresponding DBSVs, so as to establish and optimize a way for removing AFB₁ by DNA. DBSV of AFB₁ was 2.04 at 30℃ and pH 7.40. However, after adding sodium ion, calcium ion, vitamin E, vitamin C and D-glucose, DBSV of AFB₁ was changed to 2.72, 3.17, 2.67, 1.68 and 1.33 respectively. Correspondingly, the removal efficiency of AFB₁ by DNA was changed from 90.05% to 93.25%, 95.48%, 93.08%, 82.36% and 78.90% respectively. These results indicated that the external factors had a significant impact on the interaction between DNA and AFB₁. Among them, some factors enhanced the interaction between DNA and AFB₁, while some factors weakened the interaction between DNA and AFB1. The change of these external factors led to the corresponding changes in DBSV and the removal efficiency of AFB₁. DBSV of AFB₁ could really be used as an index to evaluate the intensity of the interaction between DNA and AFB₁, and to optimize the removal efficiency of AFB₁ by DNA. The experimental data also showed that the adsorption of AFB₁ to DNA was consistent with the pseudo-second-order kinetic model and the Freundlich isothermal model, was an exothermic and spontaneous process. All these results will give good references for establishing and optimizing a way of AFB₁ removal via DNA intercalation.

Humic Acids Preparation, Characterization, and Their Potential Adsorption Capacity for Aflatoxin B1 in an In Vitro Poultry Digestive Model

Vermicompost was used for humic acid (HA) preparation, and the adsorption of aflatoxin B₁ (AFB₁) was investigated. Two forms of HA were evaluated, natural HA and sodium-free HA (SFHA). As a reference, a non-commercial zeolitic material was employed. The adsorbents were characterized by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), energy-dispersive X-ray spectroscopy (EDS), zeta potential (ζ-potential), scanning electron microscopy (SEM), and point of zero charge (pHpzc). The adsorbent capacity of the materials when added to an AFB₁-contaminated diet (100 µg AFB₁/kg) was evaluated using an in vitro model that simulates the digestive tract of chickens. Characterization results revealed the primary functional groups in HA and SFHA were carboxyl and phenol. Furthermore, adsorbents have a highly negative ζ-potential at the three simulated pH values. Therefore, it appears the main influencing factors for AFB₁ adsorption are electrostatic interactions and hydrogen bonding. Moreover, the bioavailability of AFB₁ in the intestinal section was dramatically decreased when sorbents were added to the diet (0.2%, w/w). The highest AFB₁ adsorption percentages using HA and SFHA were 97.6% and 99.7%, respectively. The zeolitic material had a considerable adsorption (81.5%). From these results, it can be concluded that HA and SFHA from vermicompost could be used as potential adsorbents to remove AFB₁ from contaminated feeds.

Effectiveness of citrus fruit peel as a biosorbent for the mitigation of aflatoxins in vitro

We assessed the effectiveness of novel and cost-effective citrus fruit peel (oranges, agro-waste material) for the removal of four aflatoxins B₁, B₂, G₁, and G₂ in vitro. The biosorbent was described using SEM, XRF, XRD, FITR spectroscopy, and point of zero charge. The adsorption performance was optimised in a batch experiment by altering the various parameters, such as biosorbent dose (1-15 mg/mL), the preliminary concentration of AFs (20-200 ng/mL), pH (1-9), the incubation period (10-60 min), and temperature (10-45 °C). Maximum removal (90%) was achieved when using biosorbent at 10 mg, each AF concentration 100 ng/mL, pH 3, and incubation time 45 min at 37 °C. The experimental data were well-described by the Langmuir isotherm model and the monolayer coverage (Qe) was calculated to be 78.5, 77.8, 79.2, and 75.6 ng/mg for aflatoxin B₁, B₂, G₁, and G₂, respectively. The thermodynamic and kinetic studies suggested that the adsorption performance was endothermic and obeyed the pseudo-second-order rate model. Studies at different pH also proved that the adsorption of toxins would be strong and sufficient under pH variation, as found in the gastrointestinal tract. Thus the biosorption of AFs by orange peel powder might be an efficient low price detoxification method in humans and animals.

Outstanding Enrofloxacin Removal Using an Unmodified Low-Cost Sorbent Prepared from the Leaves of Pyracantha koidzumii

Increasing discharges of synthetic antimicrobial agents from industrial and municipal sewage, as well as from agricultural runoffs into water bodies, is still a global challenge. Here, an unmodified low-cost sorbent was prepared in an ecofriendly manner from Pyracantha koidzumii leaves for the removal of enrofloxacin (ENR). Sorbent characterization was accomplished using Fourier transform infrared spectroscopy (FTIR), scanning electron microscopy (SEM), energy-dispersive X-ray spectroscopy (EDS), BET surface area, zeta potential, and point of zero charge. Biosorption assays were carried out via batch mode concerning the impact of adsorbent dosage, contact time, solution pH, solution ionic strength, adsorbate concentration, and temperature. In general, ENR adsorption was significantly correlated with pH and ionic strength. At a neutral pH, the sorbent had a theoretical maximal ENR uptake of 138.89 mg/g. However, the adsorption capacity was significantly affected by the presence of high concentrations of divalent cations (Ca2+ and Mg2+). The findings from the kinetics and isotherms showed that the pseudo-second-order kinetic and Langmuir isotherm models best fit the experimental data. Electrostatic interactions, hydrogen bonding, and π-π stacking were the most important mechanisms of adsorption of ENR onto the P. koidzumii sorbent. Overall, this study suggests the promising application of this agricultural residue for the efficient removal of ENR from water.

Pyracantha fortuneana (Maxim.) Li: A comprehensive review of its phytochemistry, pharmacological properties, and product development

Pyracantha fortuneana (Maxim.) Li has been used as a herbal medicine in China in its long history. Since ancient times, the fruits of P. fortuneana has been considered a functional food to improve various diseases. Many bioactive substances, including proanthocyanidins, phenols, polysaccharides, and dietary fibers, have been isolated and identified from the P. fortuneana, which possess diverse biological properties both in vitro and in vivo. Although the researches on the P. fortuneana have achieved extensive progress, the systematic study of its biological activities is still relatively lacking. In addition, accumulating researches focus on the landscape value of the P. fortuneana and the development of its by-products. The by-products of P. fortuneana, which show good development potentials in the field of agricultural production and environmental protection, are important for improving the economic value of P. fortuneana and its significance. After extensive reviewing and analyzing the existing published articles, books, and patents, this study aims to a systematic and summarized research trends of P. fortuneana and its phytochemical compositions, nutritional values, pharmacological effects and health benefits of its extracts/monomers, which would be beneficial for the future development of this medicinal plant as functional food or drugs.

Removal of Aflatoxins Using Agro-Waste-Based Materials and Current Characterization Techniques Used for Biosorption Assessment

Aflatoxins are the most hazardous fungal-generated secondary metabolites produced by toxigenic Aspergillus species. These toxins are frequently detected in food and feed and impose either acute or chronic effects in humans and animals, causing great public concern. Because of the adverse effects of aflatoxins, many physical, chemical, and biological decontamination approaches have been developed. However, the most commonly used procedure is the addition of adsorbent materials into aflatoxin-contaminated diets to reduce toxin absorption and distribution to blood and target organs. In recent times, sorption technology with agro-waste-based materials has appeared as a promising alternative over conventional binding agents with the benefits of low cost, higher rentability, feasibility, and exceptional efficiencies. This review is mainly focused on discussing the most important agro-waste-based materials able to adsorb aflatoxins such as pomaces, seeds, stems, hulls, peels, leaves, berries, lignins, fibers, weeds, and various horticultural byproducts. Further data of the in vitro, in vivo, and in silico efficacy of these biomaterials to adsorb and then desorb aflatoxins are given. Besides, an overview of the main characterization techniques used to elucidate the most important physical and chemical mechanisms involved in the biosorption is presented. Finally, conclusions and future research necessities are also outlined.

A Systematic Review of the Efficacy of Interventions to Control Aflatoxins in the Dairy Production Chain—Feed Production and Animal Feeding Interventions

The study presents a systematic review of published scientific articles investigating the effects of interventions aiming at aflatoxin reduction at the feed production and animal feeding phases of the milk value chain in order to identify the recent scientific trends and summarize the main findings available in the literature. The review strategy was designed based on the guidance of the systematic review and knowledge synthesis methodology that is applicable in the field of food safety. The Web of Science and EBSCOhost online databases were searched with predefined algorithms. After title and abstract relevance screening and relevance confirmation with full-text screening, 67 studies remained for data extraction, which were included in the review. The most important identified groups of interventions based on their mode of action and place in the technological process are as follows: low-moisture production using preservatives, acidity regulators, adsorbents and various microbiological additives. The results of the listed publications are summarized and compared for all the identified intervention groups. The paper aimed to help feed producers, farmers and relevant stakeholders to get an overview of the most suitable aflatoxin mitigation options, which is extremely important in the near future as climate change will likely be accompanied by elevated mycotoxin levels.

Potential of Kale and Lettuce Residues as Natural Adsorbents of the Carcinogen Aflatoxin B1 in a Dynamic Gastrointestinal Tract-Simulated Model

Adsorption of the carcinogen aflatoxin B1 (AFB1) onto agro-waste-based materials is a promising alternative over conventional inorganic binders. In the current study, two unmodified adsorbents were eco-friendly prepared from kale and lettuce agro-wastes. A dynamic gastrointestinal tract-simulated model was utilized to evaluate the removal efficiency of the sorptive materials (0.5%, w/w) when added to an AFB1-contaminated diet (100 µg AFB1/kg). Different characterization methodologies were employed to understand the interaction mechanisms between the AFB1 molecule and the biosorbents. Based on adsorption results, the biosorbent prepared from kale was the best; its maximum adsorption capacity was 93.6%, which was significantly higher than that of the lettuce biosorbent (83.7%). Characterization results indicate that different mechanisms may act simultaneously during adsorption. Non-electrostatic (hydrophobic interactions, dipole-dipole interactions, and hydrogen bonding) and electrostatic interactions (ionic attractions) together with the formation of AFB1-chlorophyll complexes appear to be the major influencing factors driving AFB1 biosorption.

Mitigation of AFB1-Related Toxic Damage to the Intestinal Epithelium in Broiler Chickens Consumed a Yeast Cell Wall Fraction

In vivo experiments were conducted to evaluate the effectiveness of a yeast cell wall fraction (YCW) to reduce the negative impact of aflatoxin B₁ (AFB₁) to the intestinal epithelium in broiler chickens. Zeta potential (ζ-potential), point of zero charge (pH_pzc), Fourier transform infrared spectroscopy (FTIR), and scanning electron microscopy (SEM) techniques were used to characterize the YCW. Two hundred one-day-old male Ross 308 broiler chickens were randomly allocated into four treatments: (1) control, chickens fed an AFB₁-free diet; (2) AF, chickens feed an AFB₁-contaminated diet (500 ng AFB₁/g); (3) YCW, chickens fed an AFB₁-free diet + 0.05% YCW; and (4) AF + YCW, chickens fed an AFB₁-contaminated diet (500 ng AFB₁/g) + 0.05% YCW. At the end of the 21-day feeding period, fluorescein isothiocyanate dextran (FITC-d) was administered to chicks by oral gavage to evaluate gastrointestinal leakage. Blood and duodenum samples were collected to assess serum biochemistry and histomorphology, respectively. Compared to the control group, chicks of the AF group significantly diminished weight gain (WG) and average daily feed intake (ADFI), and increased feed conversion ratio (FCR), mortality rate (MR), and intestinal lesion scores (p < 0.05). Alterations in some serum biochemical parameters, and damage to the intestinal integrity were also evident in the AF-intoxicated birds. YCW supplementation improved WG and FCR and increased villus height, villus area, crypt depth, and the number of goblet cells in villi. The effects of YCW on growth performance were not significant in chicks of the AF + YCW group; however, the treatment decreased MR and significantly ameliorated some biochemical and histomorphological alterations. The beneficial effect of YCW was more evident in promoting gut health since chickens of the AF + YCW group presented a significant reduction in serum FITC-d concentration. This positive effect was mainly related to the changes in negative charges of YCW due to changes in pH, the net negative surface charge above the pH_pzc, the higher quantities of negative charged functional groups on the YCW surface, and its ability to form large aggregates. From these results, it can be concluded that YCW at low supplementation level can partially protect broilers' intestinal health from chronic exposure to AFB₁.

Ability of low contents of biosorbents to bind the food carcinogen aflatoxin B1in vitro

In vitro experiments were conducted to evaluate the effectiveness of two new biosorbents (lettuce and field horsetail) in removing aflatoxin B1 (AFB1). Formosa firethorn was used as reference material. The adsorption of AFB1 (190 ng/mL) was investigated at two sorbent contents (0.5% and 0.1% w/v) and three pHs (2, 5, and 7). Batch experiments were performed at 40 °C for 2 h. Several methodologies were used to characterize the nature of the biosorbent-AFB1 interaction. In general, when using biosorbents at 0.5% w/v, AFB1 was well adsorbed by the three tested biomaterials (70 to 100%). Furthermore, with the lowest biosorbent content (0.1% w/v), significant AFB1 adsorption efficiencies were attained at pH 5 (33 to 50%). Nevertheless, at pH 7, lettuce showed the highest ability against AFB1 removal (95%). Further characterization of the AFB1-loaded biosorbents demonstrated that chemical and physical mechanisms were involved in the adsorption process.

Efficient Aflatoxin B1 Sequestration by Yeast Cell Wall Extract and Hydrated Sodium Calcium Aluminosilicate Evaluated Using a Multimodal In-Vitro and Ex-Vivo Methodology

In this work, adsorption of the carcinogenic mycotoxin aflatoxin B1 (AFB1) by two sequestrants-a yeast cell wall-based adsorbent (YCW) and a hydrated sodium calcium aluminosilicate (HSCAS)-was studied across four laboratory models: (1) an in vitro model from a reference method was employed to quantify the sorption capabilities of both sequestrants under buffer conditions at two pH values using liquid chromatography with fluorescence detection (LC-FLD); (2) in a second in vitro model, the influence of the upper gastrointestinal environment on the mycotoxin sorption capacity of the same two sequestrants was studied using a chronic AFB1 level commonly encountered in the field (10 µg/L and in the presence of feed); (3) the third model used a novel ex vivo approach to measure the absorption of 3H-labelled AFB1 in the intestinal tissue and the ability of the sequestrants to offset this process; and (4) a second previously developed ex vivo model readapted to AFB1 was used to measure the transfer of 3H-labelled AFB1 through live intestinal tissue, and the influence of sequestrants on its bioavailability by means of an Ussing chamber system. Despite some sorption effects caused by the feed itself studied in the second model, both in vitro models established that the adsorption capacity of both YCW and HSCAS is promoted at a low acidic pH. Ex vivo Models 3 and 4 showed that the same tested material formed a protective barrier on the epithelial mucosa and that they significantly reduced the transfer of AFB1 through live intestinal tissue. The results indicate that, by reducing the transmembrane transfer rate and reducing over 60% of the concentration of free AFB1, both products are able to significantly limit the bioavailability of AFB1. Moreover, there were limited differences between YCW and HSCAS in their sorption capacities. The inclusion of YCW in the dietary ration could have a positive influence in reducing AFB1's physiological bioavailability.

Synthesised magnetic nano-zeolite as a mycotoxins binder to reduce the toxicity of aflatoxins, zearalenone, ochratoxin A, and deoxynivalenol in barley

Agricultural commodities, particularly cereals can be contaminated with mycotoxins during the pre- and post-harvest stage. The main goal of this study was to evaluate the efficacy of magnetic zeolite nanocomposite (MZNC) as an adsorbent for the reduction of mycotoxins in barley flour. The MZNC is synthesised using an eco-friendly and efficient procedure and characterised by zeta potential, field emission scanning electron microscopy, and energy-dispersive X-ray spectroscopy. The adsorbent amount that affects the adsorption capacity was optimised. Low amounts of the nanocomposite removed >99% of aflatoxins, 50% of ochratoxin A, 22% of zearalenone, and 1.8% of the deoxynivalenol from the contaminated sample and adsorption by MZNC was better than the natural zeolite; this phenomenon is related to the wide surface of nanocomposites. Results provide new insights into possible future research that could overcome the challenges of using nanotechnology to eliminate mycotoxins from agricultural products. It can be hoped that the presence of cheap and eco-friendly mycotoxin binders such as the MZNC that is synthesised and utilised in this research will help to produce secure food and feed products.

Photoluminescence label-free immunosensor for the detection of Aflatoxin B1 using polyacrylonitrile/zinc oxide nanofibers

The precise and rapid detection of hazardous molecules, microorganisms, pollutants, and toxins currently remains a global challenge. Aflatoxin B1 (AFB1) is a toxic and dangerous product of fungi that considered as cancerogenic, mutagenic, and immunosuppressive for humans and animals. Therefore, the screening of AFB1 in food and beverages plays an important role in preventing foodborne illnesses. In this study, AFB1 molecules were detected in a microfluidic device with integrated polyacrylonitrile/zinc oxide (PAN/ZnO) nanofibers fabricated via a combination of the electrospinning, and atomic layer deposition (ALD) techniques. The structural and optical analyses of PAN/ZnO nanofibers were performed and samples with the most suitable properties were utilized for AFB1 detection. In order to obtain the biorecognition layer towards AFB1, PAN/ZnO samples were modified by (3-Aminopropyl) triethoxysilane (APTES), and glutaraldehyde (GA), bovine serum albumin (BSA) and monoclonal antibodies (Anti-AFB1). Subsequently, photoluminescence (PL)-based immunosensor was integrated into a microfluidic cell and tested for AFB1 detection. The mechanism of PL changes caused by AFB1 & Anti-AFB1 complex formation was analyzed and developed. The proposed approach enables the detection of AFB1 with the lowest concentration (LOD) of about 39 pg/ml, while the sensitivity range was evaluated as 0.1-20 ng/ml. The obtained values of LOD and sensitivity, as well as the simplicity of the detection method, make this approach a prospect for further application.

Assessing the Aflatoxins Mitigation Efficacy of Blueberry Pomace Biosorbent in Buffer, Gastrointestinal Fluids and Model Wine

Blueberry (BB) and cherry pomace were investigated as new biosorbents for aflatoxins (AFs) sequestration from buffered solutions, gastrointestinal fluids and model wine. Among the tested biosorbents, BB exhibited the maximum adsorption performance for AFs and hence was further selected for the optimization of experimental parameters like pH, dosage, time and initial concentration of AFs. Material characterizations via scanning electron microscopy (SEM), Fourier transform infrared (FTIR) spectroscopy, N2 adsorption-desorption isothermal studies, thermogravimetric analysis (TGA) and X-ray photon spectroscopy (XPS) techniques revealed useful information about the texture and chemical composition of the biosorbents. The fitting of isothermal data with different models showed the model suitability trend as: Sips model > Langmuir model > Freundlich model, where the theoretical maximum adsorption capacity calculated from the Sips model was 4.6, 2.9, 2.7 and 2.4 mg/g for AFB1, AFB2, AFG1 and AFG2, respectively. Kinetics study revealed the fast AFs uptake by BB (50-90 min) while thermodynamics studies suggested the exothermic nature of the AFs adsorption from both, single as well as multi-toxin buffer systems, gastrointestinal fluids and model wine. Accrediting to the fast and efficient adsorption performance, green and facile fabrication approach and cost-effectiveness, the newly designed BB pomace can be counted as a promising contender for the sequestration of AFs and other organic pollutants.

A Theoretical Study of the Adsorption Process of B-aflatoxins Using Pyracanthakoidzumii (Hayata) Rehder Biomasses

Employing theoretical calculations with density functional theory (DFT) using the B3LYP/6-311++G(d,p) functional and basis set, the interaction of the aflatoxin B1 (AFB1) molecule and the functional groups present in the Pyracantha koidzumii biosorbent was investigated. Dissociation free energy and acidity equilibrium constant values were obtained theoretically both in solution (water) and gas phases. Additionally, the molecular electrostatic potential for the protonated molecules was calculated to verify the reactivity. Thus, methanol (hydroxyl group), methylammonium ion (amino group), acetate ion (carboxyl group), and acetone (carbonyl group), were used as representatives of the substrates present in the biomass; these references were considered using the corresponding protonated or unprotonated forms at a pH value of 5. The experimental infrared spectrophotometric data suggested the participation of these functional groups in the AFB1 biosorption process, indicating that the mechanism was dominated by electrostatic interactions between the charged functional groups and the positively charged AFB1 molecule. The theoretical determination indicated that the carboxylate ion provided the highest interaction energy with the AFB1 molecule. Consequently, an enriched biosorbent with compounds containing carboxyl groups could improve the yield of the AFB1 adsorption when using in vitro and in vivo trials.

Assessing the Aflatoxin B₁ Adsorption Capacity between Biosorbents Using an In Vitro Multicompartmental Model Simulating the Dynamic Conditions in the Gastrointestinal Tract of Poultry

Experiments were carried out to evaluate the effectiveness of three different biosorbents (banana peel, Pyracantha leaves, and Aloe powder) in removing aflatoxin B₁ (AFB₁). A noncommercial mycotoxin binder (zeolite) was used as a reference material. A laboratory model that simulated the in vivo conditions of the poultry gastrointestinal tract was utilized to prove the removal efficiency of the biosorbents when added to AFB₁-contaminated diet (100 µg/kg). The concentration of AFB₁ was determined using antibody-based immunoaffinity column and spectrofluorometry methodologies. Z potential (ζ), point of zero charge (pHpzc), energy-dispersive X-ray spectroscopy (EDS), X-ray diffraction (XRD), Fourier transform infrared spectroscopy with attenuated total reflection (FTIR-ATR), and UV-Vis diffuse reflectance spectroscopy (DRS) techniques were used to further characterize the biosorbents. The addition of the biosorbents (1.5%, w/w) to the diet significantly reduced the bioavailability of AFB₁ in the intestinal section. The highest aflatoxin adsorption values were 69% and 70% using Aloe powder and zeolite, respectively. A moderate biosorption uptake of 46% was achieved using Pyracantha leaves. The biomaterial with the lowest removal capacity was banana peel (28%). In conclusion, Aloe powder could be used as an alternative to conventional systems for AFB₁ removal.