Ecotoxicological Assessment of Microplastics in Freshwater Sources—A Review

Influence of polystyrene nanoplastics on the toxicity of haloperidol to amphibians: An in vivo and in vitro approach

Chemical pollution is a major driver for the current worldwide crisis of amphibian decline. The present study aimed to assess the influence of polystyrene nanoplastics (PS-NPLs) on the toxicity of haloperidol to aquatic life stages of amphibians, by using in vivo (tadpoles of Xenopus laevis and Pelophylax perezi) and in vitro (A6 and XTC-2 cell lines of X. laevis) biological models. Tadpoles of both species were exposed, for 96 h, to haloperidol: 0.404 to 2.05 mg l-1 (X. laevis) or 0.404 to 3.07 mg L-1 (P. perezi). The most sensitive species to haloperidol (X. laevis) was exposed to haloperidol's LC50,96h combined with two PS-NPLs concentrations (0.01 mg L-1 or 10 mg L-1); the following endpoints were monitored: mortality, malformations, body lengths and weight. In vitro cytotoxicity was assessed by exposing the two cell lines, for 72 h, to: haloperidol (0.195 to 100 mg L-1) alone and combined with 0.01 mg L-1 or 10 mg L-1 of PS-NPLs. Xenopus laevis tadpoles revealed a higher lethal and sublethal sensitivity to haloperidol than those of P. perezi, with LC50,96h of 1.45 and 2.20 mg L-1. In vitro assays revealed that A6 cell line is more sensitive haloperidol than XTC-2: LC50,72h of 13.2 mg L-1 and 5.92 mg L-1, respectively. Results also suggested a higher sensitivity of in vivo models when compared to in vitro biological. Overall, PS-NPLs did not influence haloperidol's toxicity for in vivo and in vitro biological models, except for a reduction on the incidence of malformations while increasing the lethal toxicity (at the lowest concentration) in tadpoles. These opposite interaction patterns highlight the need for a deeper comprehension of NPLs and pharmaceuticals interactions. Results suggest a low risk of haloperidol for anuran tadpoles, though in the presence of PS-NPLs the risk may be increased.

Reframing microplastics as a ligand for metals reveals that water quality characteristics govern the association of cadmium to polyethylene

Environmental characteristics including water quality and sediment properties alter the hazard that metals pose to aquatic systems by governing the speciation and partitioning of metals between water, sediment, and biotic ligands; however, alternate ligands are being introduced into aquatic systems through anthropogenic activity. Microplastics are a ligand on which metals interact through adsorption to the plastic surface. It remains unknown what factors determine the amount of metal bound to microplastic. Using a combination of laboratory experiments and machine learning, we tested a suite of eighteen environmental parameters (inclusive of both water and sediment) to understand how they influence association of cadmium to a representative microplastic, polyethylene. From this, we developed and tested a predictive model that outlines the characteristics that favour the association of cadmium to microplastic. Alkalinity, humification index of dissolved organic matter, and pH (all of which are water quality characteristics) were the three factors determining the proportion of cadmium adsorbed to plastics. These results align with other predictive models, such as the Biotic Ligand Model in demonstrating the governance of metal behaviour by water quality characteristics. To assess the relationship of the amount of cadmium bound to microplastic and cadmium uptake, an exposure was completed in which fathead minnows (Pimephales promelas) were acclimated to environments representing each of the potential outcomes of the model. The uptake of cadmium was not significantly different between groups, indicating that the stress of alterations to water quality may be a confounding factor in determining the exposure risk of microplastics and cadmium.

Recent advances in microplastic removal from drinking water by coagulation: Removal mechanisms and influencing factors

Microplastics (MPs) are emerging contaminants that are widely detected in drinking water and pose a potential risk to humans. Therefore, the MP removal from drinking water is a critical challenge. Recent studies have shown that MPs can be removed by coagulation. However, the coagulation removal of MPs from drinking water remains inadequately understood. Herein, the efficiency, mechanisms, and influencing factors of coagulation for removing MPs from drinking water are critically reviewed. First, the efficiency of MP removal by coagulation in drinking water treatment plants (DWTPs) and laboratories was comprehensively summarized, which indicated that coagulation plays an important role in MP removal from drinking water. The difference in removal effectiveness between the DWTPs and laboratory was mainly due to variations in treatment conditions and limitations of the detection techniques. Several dominant coagulation mechanisms for removing MPs and their research methods are thoroughly discussed. Charge neutralization is more relevant for small-sized MPs, whereas large-sized MPs are more dependent on adsorption bridging and sweeping. Furthermore, the factors influencing the efficiency of MP removal were jointly analyzed using meta-analysis and a random forest model. The meta-analysis was used to quantify the individual effects of each factor on coagulation removal efficiency by performing subgroup analysis. The random forest model quantified the relative importance of the influencing factors on removal efficiency, the results of which were ordered as follows: MPs shape > Coagulant type > Coagulant dosage > MPs concentration > MPs size > MPs type > pH. Finally, knowledge gaps and potential future directions are proposed. This review assists in the understanding of the coagulation removal of MPs, and provides novel insight into the challenges posed by MPs in drinking water.

A realistic combined exposure scenario: effect of microplastics and atrazine on Piaractus mesopotamicus

Microplastics, considered emerging environmental contaminants resulting from plastic degradation, are discovered in diverse aquatic ecosystems and can be unintentionally ingested by fish. Therefore, it is essential to characterize their interaction with other contaminants, such as agrochemicals, in aquatic environments. This study aimed to assess histological, enzymatic, and genotoxic biomarkers in juvenile pacú (Piaractus mesopotamicus) exposed to polyethylene (PE) microplastic particles and the herbicide atrazine, individually or combined, for 15 days. Four treatments were used: a negative control (CON), PE in the fish diet (0.1% w/w, FPE), atrazine through water (100 μg L-1, ATZ), and the mixture (ATZ+FPE). Results confirmed histological alterations in gills (edema and lamellar fusion) and liver (necrotic areas and congestion) of fish exposed to ATZ and ATZ+FPE. The number of goblet cells increased in the posterior intestine of fish under ATZ+FPE compared to CON and FPE. Enzyme activities (CAT, GST, AChE, and BChE) significantly increased in ATZ+FPE compared to CON. However, no genotoxic effect was demonstrated. These findings provide insights into the complex impacts of simultaneous exposure to atrazine and microplastics, emphasizing the need for continued research to guide effective environmental management strategies against these contaminants that represent a risk to aquatic organisms.

Mechanical Properties and Degradation Rate of Poly(Sorbitol Adipate-Co-Dioladipate) Copolymers Obtained with a Catalyst-Free Melt Polycondensation Method

A new family of polyester-based copolymers-poly(sorbitol adipate-co-ethylene glycol adipate) (PSAEG), poly(sorbitol adipate-co-1,4 butane diol adipate) (PSABD), and poly (sorbitol adipate-co-1,6 hexane diol adipate) (PSAHD)-was obtained with a catalyst-free melt polycondensation procedure using the multifunctional non-toxic monomer sorbitol, adipic acid, and diol, which are acceptable to the human metabolism. Synthesized polyesters were characterized by FTIR and 1H NMR spectroscopy. The molecular weight and thermal properties of the polymers were determined by MALDI mass spectroscopy, differential scanning calorimetry (DSC), and thermogravimetric analysis. The degradation rate was investigated, at 37 °C, in 0.1M NaOH (pH 13) and in phosphate-buffered solution (PBS) at pH 7.4. It was found that the polymers degraded faster in NaOH (i.e., in a day) compared to their degradation in PBS, which was much slower (in a week). The highest degradation rate was noticed for the PSAEG sample in both media, whereas PSAHD was the most stable polymer at pH 7.4 and 13. A reduced hydrophilicity of the polymers with diol length was indicated by low swelling percentage and sol content in water and DMSO. Mechanical studies prove that all the polymers are elastomers whose flexibility increases with diol length, shown by the increase in percentage of elongation at break and the decrease in tensile stress and Young's modulus. These biodegradable copolymers with adaptable physicochemical characteristics might be useful for a broad variety of biological applications by merely varying the length of the diol.

Recent analytical techniques, and potential eco-toxicological impacts of textile fibrous microplastics (FMPs) and associated contaminates: A review

Despite of our growing understanding of microplastic's implications, research on the effects of fibrous microplastic (FMPs) on the environment is still in its infancy. Some scientists have hypothesized the possibility of natural textile fibres, which may act as one of the emerging environmental pollutants prevalent among microplastic pollutants in the environment. Therefore, this review aims to critically evaluate the toxic effects of emerging FMPs, the presence, and sources of FMPs in the environment, identification and analytical techniques, and the potential impact or toxicity of the FMPs on the environment and human health. About175 publications (2011-2023) based on FMPs were identified and critically reviewed for transportation, analysis and ecotoxicological behaviours of FMPs in the environment. Textile industries, wastewater treatment plants, and household washing of clothes are significant sources of FMPs. In addition, various characterization techniques (e.g., FTIR, SEM, RAMAN, TGA, microscope, and X-Ray Fluorescence Spectroscopy) commonly used for the identification and analysis of FMPs are also discussed, which justifies the novelty aspects of this review. FMPs are pollutants of emerging concern due to their prevalence and persistence in the environment. FMPs are also found in the food chain, which is an alarming situation for living organisms, including effects on the nervous system, digestive system, circulatory system, and genetic alteration. This review will provide readers with a comparison of different analytical techniques, which will be helpful for researchers to select the appropriate analytical techniques for their study and enhance their knowledge about the harmful effects of FMPs.

Natural Solar Irradiation Produces Fluorescent and Biodegradable Nanoplastics

Nanoplastics (NPs) have raised global concern owing to their potential health effects. Herein, after simulated and natural solar irradiation, polyethylene, polypropylene, polystyrene, and poly(vinyl chloride) nanoplastics (PVC NPs) were observed to exhibit enhanced fluorescence, particularly PVC NPs. Furthermore, the role of photoaged NPs as a potential fluorescence indicator was evaluated by exposing a model aquatic organism Daphnia magna to these NPs. Our results revealed that photoaged NPs exhibited strong fluorescence owing to the generation of conjugated π bonds, which can achieve π-π* electron transition with low energy consumption. Photogenerated fluorescence also enabled the photoaged NPs to act as efficient fluorescent tracers, which can help track NP migration in various organisms. The results of two-photon laser confocal scanning microscopy revealed that the photoaged NPs could translocate across biological barriers and accumulate in extraintestinal tissues in addition to being ingested and excreted. Moreover, compared with pristine NPs, the photoaged NPs underwent biodegradation more easily, probably because of increased hydrophilicity due to photogenerated oxygen-containing moieties. Therefore, in addition to producing fluorescent NPs without the attachment of external fluorescent dyes, the natural photoaging process can promote the migration and degradation of photoaged NPs in food chains.

Occurrence and risk assessment of microplastics in the Lhasa River-a remote plateau river on the Qinghai-Tibet Plateau, China

Microplastics (MPs) are ubiquitous in the aquatic environment and have received widespread attention worldwide as emerging pollutants. Urbanization and anthropogenic activities are the main sources of MPs in rivers; however, the MPs in plateau rivers with less human activities are not well understood. In this study, the pollution of MPs in the surface water and shore sediment of the Lhasa River from the Qinghai-Tibet Plateau was investigated, and a risk assessment was conducted. The abundance of MPs in the surface water and shore sediment of Lhasa River were 0.63 n/L and 0.37 n/g, respectively. MPs in surface water were mainly dominated by films (43.23%) and fibers (31.12%) in shape, transparent (54.25%) in color, and 0-0.5 mm (75.83%) in size, while MPs in the shore sediment were mainly fibers (43.69%) and fragments (36.53%), transparent (71.91%), and 0-0.5 mm (60.18%). PP and PE were the predominant polymer types, accounting for 44.55% and 30.79% respectively in the surface water and 32.51% and 36.01% respectively in the shore sediment. More notably, the polymer pollution index (H) of MPs in the Lhasa River was at hazard level III due to the high risk caused by PVC, but the pollution load index (PLI) was low at hazard level I. This study reveals that the remote river in the Qinghai-Tibet Plateau are polluted by MPs, and their potential risks to the vulnerable ecosystem deserve attention.

Screening the Efficacy of a Microbial Consortium of Bacteria and Fungi Isolated from Different Environmental Samples for the Degradation of LDPE/TPS Films

In this study, a screening of the efficacy of a microbial consortium of bacteria and fungi isolated from activated sludge, river sediment, and compost for the degradation of LDPE/TPS was performed. According to the morphological and biochemical characterization, eight bacteria, Bacillus sonorensis, Bacillus subtilis, Lysinibacillus massiliensis, Bacillus licheniformis, Bacillus indicus, Bacillus megaterium, Bacillus cereus, and Pseudomonas alcaligenes, five molds, Aspergillus sp. 1, Aspergillus sp. 2, Trichoderma sp., Rhizopus sp., Penicillium sp., and Alternaria sp., and a yeast, Candida parapsilosis, were identified. The first experiment E1 was inoculated with microorganisms isolated from activated sludge and river sediment, and E2 with microorganisms isolated from compost. In both experiments, different types of polymeric materials, low density polyethylene (E1-1 and E2-1), thermoplastic starch (E1-2 and E2-2), low density polyethylene + thermoplastic starch (E1-3 and E2-3), low density polyethylene + thermoplastic starch + styrene-ethylene-styrene (E1-4 and E2-4) were added. The obtained results, weight loss, SEM, and FTIR analysis showed that the microorganisms in both experiments were able to degrade polymeric materials. The mixed culture of microorganisms in experiments E1-2 and E2-2 completely degraded TPS (thermoplastic starch). The percent weight losses of LDPE, LDPE+20% TPS, and LDPE+20% TPS+SEBS in experiment E1 were 3.3184%, 14.1152%, and 16.0062% and in experiment E2 were 3.9625%, 20.4520% and 21.9277%, respectively. SEM microscopy shows that the samples with a LDPE matrix exhibited moderate surface degradation and negligible oxidative degradation under the given conditions. FTIR/ATR data demonstrate that degradation was more intense in E2 than in E1.

Ecotoxicological perspectives of microplastic pollution in amphibians

Microplastics (MPs) are contaminants widely distributed in the environment and biota. Previously, most studies focused on identifying and characterizing microplastics in the marine environment, while their impact on freshwater ecosystems remains to be determined. This review summarizes recent findings regarding MPs physiological, immunological, and genetic effects on amphibians based upon the biological relevance of this species as indicators of freshwater pollution. Data demonstrated that MPs contamination may potentially alter various physiological processes in aquatic animals, mainly in the embryonic stages. It is worthwhile noting that adverse effects might be enhanced in synergy with other pollutants. However, amphibians might counteract the effect of MPs and other pollutants through microbiota present both in the intestine and on the skin. In addition, amphibian microbial composition might also be altered by MPs themselves in a manner that leads to unpredicted health consequences in amphibians.

Review on the ecotoxicological impacts of plastic pollution on the freshwater invertebrate Daphnia

The environmental impacts of plastic pollution have recently attracted universal attention, especially in the aquatic environment. However, research has mostly been focused on marine ecosystems, even though freshwater ecosystems are equally if not more polluted by plastics. In addition, the mechanism and extent to which plastic pollution affects aquatic biota and the rates of transfer to organisms through food webs eventually reaching humans are poorly understood, especially considering leaching hazardous chemicals. Several studies have demonstrated extreme toxicity in freshwater organisms such Daphnia. When such keystone species are affected by ambient pollution, entire food webs are destabilized and biodiversity is threatened. The unremitting increase in plastic contaminants in freshwater environments would cause impairments in ecosystem functions and structure, leading to various kinds of negative ecological consequences. As various studies have reported the effects on daphnids, a consolidation of this literature is critical to discuss the limitations and knowledge gaps and to evaluate the risk posed to the aquatic environment. This review was undertaken due to the evident need to evaluate this threat. The aims were to provide a meaningful overview of the literature relevant to the potential impact of plastic pollution and associated contaminants on freshwater daphnids as primary consumers. A critical evaluation of research gaps and perspectives is conducted to provide a comprehensive risk assessment of microplastic as a hazard to aquatic environments. We outlined the challenges and limitations to microplastic research in hampering better-focused investigations that could support the development of new plastic materials and/or establishment of new regulations.

Polystyrene microplastics induced male reproductive toxicity and transgenerational effects in freshwater prawn

Microplastics have become pervasive environmental pollutants, especially in freshwater rivers and lakes. However, how freshwater prawns' reproductive system is affected by polystyrene microplastics (PS-MPs) remains incompletely understood. Thus, the present study aimed to determine the effect of PS-MPs on the male reproductive system and offspring larval immunity in oriental river prawn. Acute exposure to PS-MPs decreased the survival rate and heart rate of prawn larvae. After chronic exposure to PS-MPs (2 and 20 mg/L) for four weeks, the oxidative stress generation in testis tissue indicated a negative impact on male prawn testicular function. PS-MPs disrupted testicular germ cell quality and caused sex hormone imbalance, leading to reduced hatching success and survival of F1 larvae, despite not being exposed to PS-MPs. Steroidogenic gene expression was altered and apoptosis-related genes had higher expression in the gonads after parental exposure to PS-MPs. Decreased immunity-related enzyme activities were observed in F1 larvae with/without continued PS-MPs exposure, compared with those in untreated prawns. A concentration-dependent increase in bioaccumulation of PS-MPs in different tissues of larval offspring was observed. Thus, PS-MPs had multiple effects on male reproductive dysfunction and transgenerational toxicity in prawns. Our findings provide a novel insight into the reproductive toxicity mechanism of microplastics in freshwater crustaceans.

Plastisphere development in relation to the surrounding biotic communities

To study the early colonization processes, polyethylene terephthalate (PET) microfragments were immersed in Lake Sakadaš and the Drava River and sampled weekly together with the surrounding biotic communities - phytoplankton, zooplankton, epixylon in the lake and epilithon in the river. At the end of the study, a rise in water level occurred in the river, which altered the environmental conditions and plankton communities. In studied environments, all of the sampled biotic communities were diverse and abundant. Plastispheres formed in both waters by the seventh day of incubation and developed rapidly, reaching a peak in abundance on the last day of the study. Initial colonization was supported equally by planktonic and periphytic taxa in both environments, but after initial settlement, plastisphere assemblages were affected differently in the river and lake. This study suggests that PET microfragments are a suitable substrate for microphyte settlement and may provide an important pathway for their transport in dynamic freshwater floodplains and river systems.

Impact of polyethylene microplastics on coral Goniopora columna causing oxidative stress and histopathology damages

In recent years, the increase of microplastics in the sea exerted a negative impact on coral health. This study has been undertaken to analyze the impact of microplastics on corals. Here, Goniopora columna was exposed to different concentrations of polyethylene microplastics (PE-MP). The daily polyps length and adaptability were recorded. Analysis of the zooxanthellae density and antioxidant activity of coral was done after 1, 3, 5 and 7 days. Further tissue morphology and accumulation of PE-MP were analyzed. The results showed that PE-MP at different concentrations can be adsorbed on the surface of corals and enter inside corals after 7 days. PE-MP at different concentrations reduced polyps length, adaptability and cause the changes in the density of zooxanthellae to be the reason for unbalancing of corals. PE-MP at different concentrations reduced the superoxide dismutase (SOD) activity after exposure to 1 day. PE-MP increased the catalase (CAT) activity at 100 mg/L after exposure; even after reducing the concentration has the same effect. PE-MP at various concentrations increased the glutathione peroxidase (GPx) activity after exposure to 5 and 7 days. It also increased the glutathione transferase (GST) and glutathione (GSH) activity after exposure to 5 and 7 days. PE-MP at different concentrations increased the malondialdehyde (MDA) content after exposure from 1 to 7 days. Analysis of tissue morphology and tissue accumulation shows that different concentrations of PE-MP cause mesenteric atrophy, vacuole, and accumulation in the coral mesenteric. These results indicate that the PE-MP can impact the antioxidant system and hampers the function of enzymes responsible for detoxification of G. columna, increase lipid peroxide content and also cause tissue damage through accumulating in the coral mesenteric.

Ontogenetic Transfer of Microplastics in Bloodsucking Mosquitoes Aedes aegypti L. (Diptera: Culicidae) Is a Potential Pathway for Particle Distribution in the Environment

The uptake and accumulation of microplastics (MPs) by bloodsucking mosquitoes Aedes aegypti L., carriers of vector-borne diseases, were investigated in the laboratory. In the experimental group, polystyrene (PS) particles were registered in insects of all life stages from larvae to pupae and adults. Ae. aegypti larvae readily ingested MPs with food, accumulating on average 7.3 × 106 items per larva in three days. The content of PS microspheres significantly decreased in mosquitoes from the larval stage to the pupal stage and was passed to the adult stage from the pupal without significant loss. On average, 15.8 items were detected per pupa and 10.9 items per adult individual. The uptake of MPs by Ae. aegypti did not affect their survival, while the average body weight of mosquitoes of all life stages that consumed PS microspheres was higher than that of mosquitoes in the control groups. Our data confirmed that in insects with metamorphosis, MPs can pass from feeding larvae to nonfeeding pupae in aquatic ecosystems and, subsequently, to adults flying to land. Bloodsucking mosquitoes can participate in MP circulation in the environment.

Effects of Polyester Fibers and Car Tire Particles on Freshwater Invertebrates

Microplastic ingestion has been shown for various organisms, but knowledge of the potential adverse effects on freshwater invertebrates remains limited. We assessed the ingestion capacity and the associated effects of polyester fibers (26-5761 µm) and car tire particles (25-75 µm) on freshwater invertebrates under acute and chronic exposure conditions. A range of microplastic concentrations was tested on Daphnia magna, Hyalella azteca, Asellus aquaticus, and Lumbriculus variegatus using water only (up to 0.15 g/L) or spiked sediment (up to 2 g/kg dry wt), depending on the habitat of the species. Daphnia magna did not ingest any fibers, but low levels of fibers were ingested by all tested benthic invertebrate species. Car tire particle ingestion rose with increasing exposure concentration for all tested invertebrates and was highest in D. magna and L. variegatus. In most cases, no statistically significant effects on mobility, survival, or reproductive output were observed after acute and chronic exposure at the tested concentrations. However, fibers affected the reproduction and survival of D. magna (no-observed-effect concentration [NOEC]: 0.15 mg/L) due to entanglement and limited mobility under chronic conditions. Car tire particles affected the reproduction (NOEC: 1.5 mg/L) and survival (NOEC: 0.15 mg/L) of D. magna after chronic exposure at concentrations in the same order of magnitude as modeled river water concentrations, suggesting that refined exposure and effect studies should be performed with these microplastics. Our results confirm that microplastic ingestion by freshwater invertebrates depends on particle shape and size and that ingestion quantity depends on the exposure pathway and the feeding strategy of the test organism. Environ Toxicol Chem 2022;41:1555-1567. © 2022 The Authors. Environmental Toxicology and Chemistry published by Wiley Periodicals LLC on behalf of SETAC.

Physical and chemical degradation of littered personal protective equipment (PPE) under simulated environmental conditions

Investigations of the physicochemical degradation of personal protective equipment (PPE) under controlled environmental conditions are largely lacking. Here the chemical and physical changes of face masks and gloves (recovered from the marine environment) were evaluated after exposure time up to 60 days of simulated environmental conditions. The results suggested that the polymer backbone of PPE suffers typical changes induced by sun exposure. Changes in the intensity of diffraction peaks indicated shifts in the crystallinity of PPE, possibly altering their thermal behavior. Signs of physical degradation in PPE, such as ruptures, and rough surfaces, which exacerbated over time were also detected. Additionally, signals of some elements of concern, such as Cu and Mo, and elements typically found in seawater were detected. The results of this study allowed us to better understand the degradation of typical PPE items in the marine environment, ultimately resulting in the release of microplastics and chemical contaminants.

Assessment of the Influence of Size and Concentration on the Ecotoxicity of Microplastics to Microalgae Scenedesmus sp., Bacterium Pseudomonas putida and Yeast Saccharomyces cerevisiae

The harmful effects of microplastics are not yet fully revealed. This study tested harmful effects of polyethylene (PE), polypropylene (PP), polystyrene (PS), polyvinyl chloride (PVC), and polyethylene terephthalate (PET) microplastics were tested. Growth inhibition tests were conducted using three microorganisms with different characteristics: Scenedesmus sp., Pseudomonas putida, and Saccharomyces cerevisiae. The growth inhibition test with Scenedesmus sp. is relatively widely used, while the tests with Pseudomonas putida and Saccharomyces cerevisiae were, to our knowledge, applied to microplastics for the first time. The influence of concentration and size of microplastic particles, in the range of 50–1000 mg/L and 200–600 µm, was tested. Determined inhibitions on all three microorganisms confirmed the hazardous potential of the microplastics used. Modeling of the inhibition surface showed the increase in harmfulness with increasing concentration of the microplastics. Particle size showed no effect for Scenedesmus with PE, PP and PET, Pseudomonas putida with PS, and Saccharomyces cerevisiae with PP. In the remaining cases, higher inhibitions followed a decrease in particle size. The exception was Scenedesmus sp. with PS, where the lowest inhibitions were obtained at 400 µm. Finally, among the applied tests, the test with Saccharomyces cerevisiae proved to be the most sensitive to microplastics.

Analysis of Microplastics in Human Feces Reveals a Correlation between Fecal Microplastics and Inflammatory Bowel Disease Status

Human ingestion of microplastics (MPs) is inevitable due to the ubiquity of MPs in various foods and drinking water. Whether the ingestion of MPs poses a substantial risk to human health is far from understood. Here, by analyzing the characteristics of MPs in the feces of patients with inflammatory bowel disease (IBD) and healthy people, for the first time, we found that the fecal MP concentration in IBD patients (41.8 items/g dm) was significantly higher than that in healthy people (28.0 items/g dm). In total, 15 types of MPs were detected in feces, with poly(ethylene terephthalate) (22.3-34.0%) and polyamide (8.9-12.4%) being dominant, and their primary shapes were sheets and fibers, respectively. We present evidence indicating that a positive correlation exists between the concentration of fecal MPs and the severity of IBD. Combining a questionnaire survey and the characteristics of fecal MPs, we conclude that the plastic packaging of drinking water and food and dust exposure are important sources of human exposure to MPs. Furthermore, the positive correlation between fecal MPs and IBD status suggests that MP exposure may be related to the disease process or that IBD exacerbates the retention of MPs. The relative mechanisms deserve further studies. Our results also highlight that fecal MPs are useful for assessing human MP exposure and potential health risks.

Microbial biodegradation of plastics: Challenges, opportunities, and a critical perspective

The abundance of synthetic polymers has increased due to their uncontrolled utilization and disposal in the environment. The recalcitrant nature of plastics leads to accumulation and saturation in the environment, which is a matter of great concern. An exponential rise has been reported in plastic pollution during the corona pandemic because of PPE kits, gloves, and face masks made up of single-use plastics. The physicochemical methods have been employed to degrade synthetic polymers, but these methods have limited efficiency and cause the release of hazardous metabolites or by-products in the environment. Microbial species, isolated from landfills and dumpsites, have utilized plastics as the sole source of carbon, energy, and biomass production. The involvement of microbial strains in plastic degradation is evident as a substantial amount of mineralization has been observed. However, the complete removal of plastic could not be achieved, but it is still effective compared to the preexisting traditional methods. Therefore, microbial species and the enzymes involved in plastic waste degradation could be utilized as eco-friendly alternatives. Thus, microbial biodegradation approaches have a profound scope to cope with the plastic waste problem in a cost-effective and environmental-friendly manner. Further, microbial degradation can be optimized and combined with physicochemical methods to achieve substantial results. This review summarizes the different microbial species, their genes, biochemical pathways, and enzymes involved in plastic biodegradation.

Micro(nano)plastics as an emerging risk factor to the health of amphibian: A scientometric and systematic review

Although the toxicity of microplastics (MPs) and nanoplastics (NPs) is recognized at different trophic levels, our know-how about their effects on amphibians is limited. Thus, we present and discuss the current state on studies involving amphibians and plastic particles, based on a broad approach to studies published in the last 5 years. To search for the articles, the ISI Web of Science, ScienceDirect, and Scopus databases were consulted, using different descriptors related to the topic of study. After the systematic search, we identified 848 publications. Of these, 12 studies addressed the relationship "plastic particles and amphibians" (7 studies developed in the laboratory and 5 field studies). The scientometric analysis points to geographic concentration of studies in Brazil and China; low investment in research in the area, and limited participation of international authors in the studies carried out. In the systematic approach, we confirm the scarcity of available data on the toxicity of plastic particles in amphibians; we observed a concentration of studies in the Anura order, only one study explored the toxicological effects of NPs and polystyrene and polyethylene are the most studied plastic types. Moreover, the laboratory tested concentrations are distant from those of the environmentally relevant; and little is known about the mechanisms of action of NPs/MPs involved in the identified (eco)toxicological effects. Thus, we strongly recommend more investments in this area, given the ubiquitous nature of NPs/MPs in aquatic environments and their possible consequences on the dynamics, reproduction, and survival of species in the natural environment.

Adverse effects polystyrene microplastics exert on zebrafish heart - Molecular to individual level

In the present study the effects of sublethal concentrations of polystyrene microplastics (PS-MPs) on zebrafish were evaluated at multiple levels, related to fish activity and oxidative stress, metabolic changes and contraction parameters in the heart tissue. Zebrafish were fed for 21 days food enriched with PS-MPs (particle sizes 3-12 µm) and a battery of stress indices like DNA damage, lipid peroxidation, autophagy, ubiquitin levels, caspases activation, metabolite adjustments, frequency and force of ventricular contraction were measured in fish heart, parallel to fish swimming velocity. In particular, exposure to PS-MPs caused significant decrease in heart function and swimming competence, while enhanced levels of oxidative stress indices and metabolic adjustments were observed in the heart of challenged species. Among stress indices, DNA damage was more vulnerable to the effect of PS-MPs. Our results provide evidence on the multiplicity of the PS-MPs effects on cellular function, physiology and metabolic pathways and heart rate of adult fish and subsequent effects on fish activity and fish fitness thus enlightening MPs characterization as a potent environmental pollutant.

Source, distribution and emerging threat of micro- and nanoplastics to marine organism and human health: Socio-economic impact and management strategies

The nature of micro- and nanoplastics and their harmful consequences has drawn significant attention in recent years in the context of environmental protection. Therefore, this paper aims to provide an overview of the existing literature related to this evolving subject, focusing on the documented human health and marine environment impacts of micro- and nanoplastics and including a discussion of the economic challenges and strategies to mitigate this waste problem. The study highlights the micro- and nanoplastics distribution across various trophic levels of the food web, and in different organs in infected animals which is possible due to their reduced size and their lightweight, multi-coloured and abundant features. Consequently, micro- and nanoplastics pose significant risks to marine organisms and human health in the form of cytotoxicity, acute reactions, and undesirable immune responses. They affect several sectors including aquaculture, agriculture, fisheries, transportation, industrial sectors, power generation, tourism, and local authorities causing considerable economic losses. This can be minimised by identifying key sources of environmental plastic contamination and educating the public, thus reducing the transfer of micro- and nanoplastics into the environment. Furthermore, the exploitation of the potential of microorganisms, particularly those from marine origins that can degrade plastics, could offer an enhanced and environmentally sound approach to mitigate micro- and nanoplastics pollution.