Optimization for the production of cellulase enzyme from municipal solid waste residue by two novel cellulolytic fungi

Evaluation and Optimization of the Different Process Parameters of Mild Acid Pretreatment of Waste Lignocellulosic Biomass for Enhanced Energy Procreation

The screening and evaluation of different waste lignocellulosic biomasses to meet the ever-increasing energy demand, from the widely available waste lignocellulosic biomasses evaluated. For the current study, peanut shell biomass is considered for energy procreation. However, the energy content of biomass is still lesser as compared to conventional fossil fuels like coal and petroleum. The dilute acid pretreatment has been proven to improve the energy content of the lignocellulosic biomasses to a significant extent. Various pretreatment process parameters have been reported to have different degrees of impact on the betterment of energy procreation. Among various types of pretreatments, dilute acid pretreatment holds notable cognizance. Accordingly, the current manuscript is to evaluate the impact of various pretreatment process parameters (time, temperature, acid concentration, mass:liquor ratio, and particle size which were defined through an exhaustive literature search) for improving the energy recovery potential. The obtained results indicated notable changes in the devolatilization characteristics of the biomass as a result of pretreatment, thereby resulting in the upgradation of the fuel properties. A sustainability investigation has been carried out to point out the efficacy of the optimized pretreatment of biomass in terms of environmental sustainability and was also compared with the raw variant (untreated form of biomass). The proposed scheme of study will definitely be beneficial toward the mitigation of the energy crisis in the state of Jharkhand.

Soil burial-induced degradation of cellulose films in a moisture-controlled environment

In this study, the biodegradability of cellulose films was evaluated in controlled-moisture soil environments. The films were prepared from low-quality cotton fibers through dissolution in DMAc/LiCl, casting, regeneration, glycerol plasticization, and hot-pressing. Two soil burial degradation experiments were conducted in August 2020 (11th August to 13th October) and March 2021 (24th March to 24th July) under controlled moisture conditions to assess the biodegradation behavior of cellulose films. The films were retrieved from soil beds at seven-day intervals, and morphological and physicochemical changes in the films were investigated. The results indicated that the cellulose films exhibited gradual changes starting on Day 7 and major changes after Day 35. Stereomicroscopy images showed the growth and development of fungal mycelia on the surface of the films, and FTIR spectroscopy confirmed the presence of biomolecules originating from microorganisms. The tensile strength and elongation of cellulose films were significantly reduced by 64% and 96% in the first experiment and by 40% and 94% in the second experiment, respectively, during the degradation period. Degradation also significantly impacted the thermal stability (14% and 16.5% reduction, respectively, in the first and second studies) of the films. The cellulose-based films completely degraded within 63 days in late summer and 112 days in spring. This study demonstrates that, unlike synthetic plastics, films prepared from low-quality cotton fibers can easily degrade in the natural environment.

Rice Husk, Brewer's Spent Grain, and Vine Shoot Trimmings as Raw Materials for Sustainable Enzyme Production

Solid by-products with lignocellulosic structures are considered appropriate substrates for solid-state fermentation (SSF) to produce enzymes with diverse industrial applications. In this work, brewer's spent grain (BSG), rice husk (RH), and vine shoot trimmings (VSTs) were employed as substrates in SSF with Aspergillus niger CECT 2088 to produce cellulases, xylanases, and amylases. The addition of 2% (NH4)2SO4 and 1% K2HPO4 to by-products had a positive effect on enzyme production. Substrate particle size influenced enzyme activity and the overall highest activities were achieved at the largest particle size (10 mm) of BSG and RH and a size of 4 mm for VSTs. Optimal substrate composition was predicted using a simplex centroid mixture design. The highest activities were obtained using 100% BSG for β-glucosidase (363 U/g) and endo-1,4-β-glucanase (189 U/g), 87% BSG and 13% RH for xylanase (627 U/g), and 72% BSG and 28% RH for amylase (263 U/g). Besides the optimal values found, mixtures of BSG with RH or VSTs proved to be alternative substrates to BSG alone. These findings demonstrate that SSF bioprocessing of BSG individually or in mixtures with RH and VSTs is an efficient and sustainable strategy to produce enzymes of significant industrial interest within the circular economy guidelines.

Bioprocess development for extraction and purification of cellulases from Aspergillus niger 3ASZ using statistical experimental design techniques

The amount of cellulosic materials is large and may lead to environmental pollution, so they can be converted into useful materials for use in food or energy. Statistical design (Plackett-Burman and Box-Behnken) was the main topic of this study and was used to optimize the effect of environmental factors on cellulase production by Aspergillus niger. Cellulase production using Plackett-Burman was 6.86-fold higher than the production of cellulase using the basal medium. B0X-Benken showed an increase in the cellulase production equal to 18 times compared to the basal medium, where the cellulase produced had an activity equal to 79.4 U/mL/min. Ammonium sulfate precipitation was applied to the crude enzyme, followed by sequential fractionation with an Amicon system. The Amicon was used to demonstrate the final volume, total enzyme activity, specific activity, purification fold, and yield of cellulase (partially purified enzyme). Numerous cellulolytic enzymes are abundant in Aspergillus species. All of the data showed that Aspergillus sp. might be a reliable source of industrially and economically useful cellulases. By statistically calculating the relevance of a large number of elements in one experiment using a multifactorial statistical design, time may be saved while still maintaining the validity of each component.

Microbial cellulase production and its potential application for textile industries

Purpose

The textile industry’s previous chemical use resulted in thousands of practical particulate emissions, such as machine component damage and drainage system blockage, both of which have practical implications. Enzyme-based textile processing is cost-effective, environmentally friendly, non-hazardous, and water-saving. The purpose of this review is to give evidence on the potential activity of microbial cellulase in the textile industry, which is mostly confined to the realm of research.

Methods

This review was progressive by considering peer-reviewed papers linked to microbial cellulase production, and its prospective application for textile industries was appraised and produced to develop this assessment. Articles were divided into two categories based on the results of trustworthy educational journals: methods used to produce the diversity of microorganisms through fermentation processes and such approaches used to produce the diversity of microbes through microbial fermentation. Submerged fermentation (SMF) and solid-state fermentation (SSF) techniques are currently being used to meet industrial demand for microbial cellulase production in the bio textile industry.

Results

Microbial cellulase is vital for increasing day to day due to its no side effect on the environment and human health becoming increasingly important. In conventional textile processing, the gray cloth was subjected to a series of chemical treatments that involved breaking the dye molecule’s amino group with Cl − , which started and accelerated dye(-resistant) bond cracking. A cellulase enzyme is primarily derived from a variety of microbial species found in various ecological settings as a biotextile/bio-based product technology for future needs in industrial applications.

Conclusion

Cellulase has been produced for its advantages in cellulose-based textiles, as well as for quality enhancement and fabric maintenance over traditional approaches. Cellulase’s role in the industry was microbial fermentation processes in textile processing which was chosen as an appropriate and environmentally sound solution for a long and healthy lifestyle.

Optimization and production of holocellulosic enzyme cocktail from fungi Aspergillus nidulans under solid-state fermentation for the production of poly(3-hydroxybutyrate)

The production of petroleum-based plastics increased dramatically following industrialization. Because of multifaceted properties such as durability, thermostability, water resistance, and many others, these plastics have become an indispensable part of daily life. However, while improving people's quality of life, indiscriminate use of plastics has caused pollution and raised environmental concerns. To address this situation and reduce environmental risks, microbially produced biopolymers such as poly-3-hydroxyalkanoates can be used to make bioplastics that are completely biodegradable under normal environmental conditions. At the moment, the cost of bioplastic production is high when compared to petroleum-based plastics, so alternate strategies for making the bioplastic process economical are urgently needed. Agricultural waste is abundant around the world and can be efficiently used as a low-cost renewable feedstock after pretreatment and enzymatic hydrolysis. Fungi are well known as primary degraders of lignocellulosic waste, and this property was used in the current study to enzymatically hydrolyze the pretreated paddy straw for the production of reducing sugars, which were then used in the microbial fermentation for the production of PHB. In this study, Aspergillus nidulans was used to advance a low-cost and efficient enzyme hydrolysis system for the generation of reducing sugars from lignocellulosic biomass. For the production of the holocellulosic enzyme complex, the fungus was grown on wheat straw with Reese mineral medium as a wetting agent. After 216 h of solid-state fermentation at 30 °C, pH 6.0, the enzyme extract from A. nidulans demonstrated the highest activity, CMCase 68.58 (± 0.55), FPase 12.0 (± 0.06), Xylanase 27.17 (± 0.83), and β-glucosidase 1.89 (± 0.037). The initial pH, incubation temperature, and time all had a significant impact on final enzyme activity. Enzymatic hydrolysis of pretreated paddy straw produced reducing sugars (8.484 to 30.91 gL^-1) that were then used to produce poly(3-hydroxybutyrate) using halophilic bacterial isolates. Burkholderia gladioli 2S4R1 and Bacillus cereus LB7 accumulated 26.80% and 20.47% PHB of the cell dry weight, respectively. This suggests that the holocellulosic enzyme cocktail could play a role in the enzymatic hydrolysis of lignocellulosic materials and the production of PHA from less expensive feedstocks such as agricultural waste.

A systematic review on potential microbial carbohydrases: current and future perspectives

Various studies have shown that the microbial proteins are often more stable than belongs to other sources like plant and animal origin. Hence, the interest in microbial enzymes has gained much attention due to many potential applications like bioenergy, biofuel production, biobleaching, bioconversion and so on. Additionally, recent trends revealed that the interest in isolating novel microbes from harsh environments have been the main focus of many scientists for various applications. Basically, industrially important enzymes can be categorized into mainly three groups: carbohydrases, proteases, and lipases. Among those, the enzymes especially carbohydrases involved in production of sugars. Carbohydrases include amylases, xylanases, pectinases, cellulases, chitinases, mannases, laccases, ligninases, lactase, glucanase, and glucose oxidase. Thus, here, an approach has been made to highlight five enzymes namely amylase, cellulase, laccase, pectinase, and xylanase from different sources with special emphasis on their properties, mechanism, applications, production optimization, purification, molecular approaches for its enhanced and stable production, and also biotechnological perspectives of its future development. Also, green and sustainable catalytic conversion strategies using nanoparticles of these enzymes have also been discussed. This review will provide insight into the carbohydrases importance and their usefulness that will help to the researchers working in this field.

Cellulolytic and Xylanolytic Enzymes from Yeasts: Properties and Industrial Applications

Lignocellulose, the main component of plant cell walls, comprises polyaromatic lignin and fermentable materials, cellulose and hemicellulose. It is a plentiful and renewable feedstock for chemicals and energy. It can serve as a raw material for the production of various value-added products, including cellulase and xylanase. Cellulase is essentially required in lignocellulose-based biorefineries and is applied in many commercial processes. Likewise, xylanases are industrially important enzymes applied in papermaking and in the manufacture of prebiotics and pharmaceuticals. Owing to the widespread application of these enzymes, many prokaryotes and eukaryotes have been exploited to produce cellulase and xylanases in good yields, yet yeasts have rarely been explored for their plant-cell-wall-degrading activities. This review is focused on summarizing reports about cellulolytic and xylanolytic yeasts, their properties, and their biotechnological applications.

Production Optimization and Biochemical Characterization of Cellulase from Geobacillus sp. KP43 Isolated from Hot Spring Water of Nepal

This study is aimed at isolating and identifying a thermophilic cellulolytic bacterium from hot spring water and characterizing thermostable cellulase produced by the isolate. Enrichment and culture of water sample was used for isolation of bacterial strains and an isolate with highest cellulase activity was chosen for the production, partial purification, and biochemical characterization of the enzyme. Different staining techniques, enzymatic tests, and 16s ribosomal DNA (16s rDNA) gene sequencing were used for the identification of the isolate. The cellulase producing isolate was Gram positive, motile, and sporulated rod-shaped bacterium growing optimally between 55°C and 65°C. Based on partial 16s rDNA sequence analysis, the isolate was identified as Geobacillus sp. and was designated as Geobacillus sp. KP43. The cellulase enzyme production condition was optimized, and the product was partially purified and biochemically characterized. Optimum cellulase production was observed in 1% carboxymethyl cellulose (CMC) at 55°C. The molecular weight of the enzyme was found to be approximately 66 kDa on 12% SDS-PAGE analysis. Biochemical characterization of partially purified enzyme revealed the temperature optimum of 70°C and activity over a wide pH range. Further, cellulase activity was markedly stimulated by metal ion Fe^2+. Apart from cellulases, the isolate also depicted good xylanase, cellobiase, and amylase activities. Thermophilic growth with a variety of extracellular enzyme activities at elevated temperature as well as in a wide pH range showed that the isolated bacteria, Geobacillus sp. KP43, can withstand the harsh environmental condition, which makes this organism suitable for enzyme production for various biotechnological and industrial applications.

Microbial production of multienzyme preparation from mosambi peel using Trichoderma asperellum

Fruit and vegetable wastes create unhygienic conditions and pose a environmental pollution. The utilization of such wastes as carbon sources for production of enzyme with microbial intervention could be an ecofriendly and profitable approach, apart from diminishing the waste load. The present investigation focused on the feasibility of using mosambi (Citrus limetta) peel as substrate for multienzyme production (pectinase, cellulase and amylase) through microbial intervention. Fifteen fungi were isolated from organic waste and screened in vitro their potential of biodegradation of mosambi peel through enzymes production. The best performing isolate was selected and identified as Trichoderma asperellum NG-125 (accession number-MW287256). Conditions viz. temperature, pH, incubation time and nutrient addition were optimized for efficient enzymes production. The maximum enzyme activity (U ml^-1 min^-1) of pectinase (595.7 ± 2.47), cellulase (497.3 ± 2.06) and amylase (440.9 ± 1.44) were observed at pH 5.5, incubation temperature of 30 °C after 10 days of fermentation. Moreover, macro-nutrients such as ammonium sulfate (0.1%) and potassium-di-hydrogen-ortho-phosphate (0.01%) further also enhanced the production of enzymes. The SDS-PAGE analysis of purified pectinase, cellulase and amylase using showed molecular mass of 43, 66 and 33 kDa, respectively. The enzyme retention activity (ERA) of aforesaid enzymes was also tested with four different natural fiber matrices viz., bagasse, rice husk, paddy straw and wheat straw. Among these, the maximum ERA was observed on bagasse matrix (pectinase-56.35%, cellulose-77.68% and amylase 59.54%). Enzymatic juice clarification yield obtained with test enzyme was 75.8%, as compared to 80.5% of commercial enzyme. The result indicates that T. asperellum may be exploited as multifaceted biocatalysis.

Structural and Biochemical Characterization of Endo-β-1,4-glucanase from Dictyoglomus thermophilum, a Hyperthermostable and Halotolerant Cellulase

Enzymatic conversion of polysaccharides in the lignocellulosic biomass is currently the subject of intensive research and will be a key technology in future biorefineries. Using a bioinformatics approach, we previously identified a putative endo-β-1,4-glucanase (DtCel5A) from Dictyoglomus thermophilum, a chemoorganotrophic and thermophilic bacterium. Here, we structurally and functionally characterize DtCel5A and show that it is endowed with remarkable thermal and chemical stability. The structural features of DtCel5A and of its complex with cellobiose have been investigated by combining X-ray crystallography and other biophysical studies. Importantly, biochemical assays show that DtCel5A retains its activity on cellulose at high temperatures and at elevated salt concentrations. These features make DtCel5A an enzyme with interesting biotechnological applications for biomass degradation.

Degradation of pretreated agroforestry residues by selected micromycetes

Nowadays, there are huge amounts of lignocellulosic materials left in agroforestry practice, which can be transformed into useful products. Biomass exploitation could be aiming not only at replacing conventional energy sources but also at preserving biodiversity and natural ecosystems. Five micromycetes were studied with goal to determine their potential to produce active cellulases as well as the ability to decompose pretreated wheat straw and oak sawdust after seven days of solid-state fermentation. Wheat straw was better lignocellulosic substrate than oak sawdust for the production of cellulases in all five micromycetes. Thus, Penicillium solitum BEOFB 1190m has shown to be the best producer of highly active forms of xylanases (7532.36 ? 89.37 U/L). The most active endo- and exocellulases (2299.70 ? 72.17 U/L and 195.66 ? 4.64 U/L, respectively) were produced by Trichoderma harzianum BEOFB 1230m, while the maximal value of ?-glucosidase activity (215.69 ? 3.13 U/L) was detected after Fusarium graminearum BEOFB 820m cultivation. T. harzianum also showed high efficiency in wheat straw cellulose and hemicellulose depolymerization (23.90% and 33.00%, respectively), which resulted in the highest dry matter loss (36.25%). The results of the study showed great potential of tested micromycetes to synthesize cellulolytic enzymes and consequently transform abundant, low-cost plant residues such as wheat straw into useful products including biofuel.

Kinetics of aerobic cellulose degradation in raw municipal wastewater

Cellulose contributes approximately one third of the influent suspended solids to wastewater treatment plants and is a key target for resource recovery. This study investigated the temperature impact on biological aerobic degradation of cellulose in laboratory-scale sequencing batch reactors (SBR) at four different temperatures (10-33 °C) and two different solids retention times (SRT) of 15 days and 3 days. The degradation efficiency of cellulose was observed to increase with temperature and was slightly dependent on SRT (80%-90% at an SRT of 15 days, and 78%-85% at an SRT of 3 days). Hydrolysis followed 1st order kinetics, rather than the biomass dependent Contois kinetics (default in the activated sludge models), with a hydrolysis coefficient at 20 °C of 1.14 ± 0.01 day^-1.

Biogenic enabled in-vitro synthesis of nickel cobaltite nanoparticle and its application in single stage hybrid biohydrogen production

In biomass to biofuels production technology enzyme plays a key role. Nevertheless, the high production cost of cellulase enzyme is one of the critical issues in the economical production of biofuels. Nowadays, implementation of nanomaterials as catalyst is emerging as an innovative approach for the production of sustainable energy. In this context, synthesis of nickel cobaltite nanoparticles (NiCo₂O₄ NPs) via in vitro route has been conducted using fungus Emericella variecolor NS3 meanwhile; its impact has been evaluated on improved thermal and pH stability of crude cellulase enzyme obtained from Emericella variecolor NS3. Additionally, bioconversion of alkali treated rice straw using NiCo₂O₄ NPs stabilized cellulase produced sugar hydrolyzate which is further used for H₂ production via hybrid fermentation. Total 51.7 g/L sugar hydrolyzate produced 2978 mL/L cumulative H₂ production after 336 h along with maximum rate 34.12 mL/L/h in 24 h using Bacillus subtilis PF_1 and Rhodobacter sp. employed for dark and photo-fermentation, respectively.

Production of cellulase by Novosphingobium sp. Cm1 and its potential application in lignocellulosic waste hydrolysis

Management of lignocellulosic wastes in and around the municipality area requires special consideration. Continuous deposition of these wastes to the nearby areas led to gradual deterioration of the environment. The objective of this study was to produce cellulase from the bacteria isolated from the unexplored rainforest of NE-India for lignocellulosic waste hydrolysis. Based on carboxymethyl cellulose utilization and the congo red test, Novosphingobium sp. Cm1 was found to be the most promising strain out of 114 bacterial isolates and the strain was selected for further study. The optimization of the fermentative conditions for maximum enzyme activity was carried out using one factor-at-a-time strategy and the optimum pH, temperature and incubation time was recorded as pH 5, 37 °C and 96 h respectively. The maximum β-1,4-endoglucanase activity was observed with 1.5% CMC (5.1 ± 0.05 U/mL) and 0.25% yeast extract (7.6 ± 0.72 U/mL). The bacterial waste hydrolysis ability was investigated using three wastes where vegetable waste showed maximum activity of 3.4 ± 0.48 U/mL. Bacterial interaction and waste utilization were verified using Scanning Electron Microscope and Fourier-Transform infrared spectroscopy analysis. The present study confirmed the promising ability of Novosphingobium sp. to waste hydrolysis. Further investigations may lead to new possibilities for low-cost enzyme production that will help to meet the rising cellulase demand.

Biotechnological potential of microorganisms from textile effluent: isolation, enzymatic activity and dye discoloration

Environmental pollution may be considered one of the main problems affecting the world population. As the effluents from textile industries are the largest representatives of sources of pollution of water bodies due to the disposal of colored compounds in the environment. Microorganisms capable of thriving in textile wastewater may exhibit metabolic machinery to synthesize a wide variety of enzymes and/or secondary metabolites of industrial interest. The present work investigated the biotechnological potential of filamentous fungi from wastewater of a textile industry for the production of laccase, cellulase, amylase and lipase enzymes and their potential for discoloration capacity of Remazol Brilliant Blue R synthetic dye. The isolate Aspergillus sydowii (ITF 30) presented the best cellulase (46.74 U mL-1), amylase, lipase and laccase (0.0273 U L-1) production, as well as RBBR dye discoloration ability in solid medium, followed by isolate Aspergillus sydowii (ITF 27) able to synthesize cellulase, amylase and laccase and had the capacity to discolor 74.7% of RBBR in liquid medium. The results of the present work encourage future studies of characterization, optimization and purification of the enzymes encountered, aiming to be used in bioremediation processes of textile industrial effluents.

Medium supplementation and thorough optimization to induce carboxymethyl cellulase production by Trichoderma reesei under solid state fermentation of nettle biomass

In the present study, the production of cellulase by Trichoderma reesei under solid-state fermentation of nettle biomass was promoted through supplementation of the culture media using carbonaceous additives and comprehensive optimization of the cultivation via the Taguchi method. CMCase activities about 5.5-6.1 U/gds were obtained by fermentation of the autoclave-pretreated biomass, among various chemical and physical pretreatments. Then, several additives including Tween 80, betaine, carboxymethyl cellulose, and lactose were individually or in combination added to the culture media to induce the enzyme production. The results proved that such additives could act as either inducers or inhibitors. Furthermore, CMCase activity surprisingly increased to 14.0 U/gds by supplementing the fermentation medium with the optimal mixture of additives including 0.08 mg/gds Tween 80, 0.4 mg/gds betaine, and 0.2 mg/gds carboxymethyl cellulose. Factor screening according to Plackett-Burman design confirmed that the levels of Urea and MgSO₄ among basal medium constituents as well as pH of the medium were significantly affected CMCase production. By optimizing the levels of these factors, CMCase activity of 18.8 U/gds was obtained, which was noticeably higher than that of fermentation of the raw nettle. The applied procedure can be promisingly used to convert the nettle biomass into valuable products.

Cost-effective production of biocatalysts using inexpensive plant biomass: a review

Enzymes are the complex protein moieties, catalyze the rate of chemical reactions by transforming various substrates to specific products and play an integral part in multiple biochemical cycles. Advancement in enzyme research and its integration with industries have reformed the biotech industries. It provides a superior monetary and ecological exchange to traditional material measures in an efficient and environmentally sustainable manner. The cost-effective production of pure and highly active enzymes is still a challenge for the biocatalyst industries. The use of high purity substrates further raises the cost of a typical biocatalyst. The use of low-cost plant-based biomasses as an enticing and sustainable substrate for enzyme production is the most cost-effective approach to these problems. Given the relevance of biomass as a substrate for enzyme development, this review article focuses on the key source, composition and major enzyme generated using various biomass residues. Furthermore, the difficulties associated with the use of biomass as a substrate and technical developments in this area, are also addressed. The use of waste biomass as a substrate lowers the ultimate cost for the production of biocatalysts while simultaneously reduces the waste burden from the environment.

Exploitation of Ultrasound Technique for Enhancement of Microbial Metabolites Production

Microbial metabolites have significant impacts on our lives from providing valuable compounds for nutrition to agriculture and healthcare. Ever-growing demand for these natural compounds has led to the need for smart and efficient production techniques. Ultrasound is a multi-applicable technology widely exploited in a range of industries such as chemical, medical, biotechnological, pharmaceutical, and food processes. Depending on the type of ultrasound employed, it can be used to either monitor or drive fermentation processes. Ultrasonication can improve bioproduct productivity via intensifying the performance of living organisms. Controlled ultrasonication can influence the metabolites' biosynthesis efficiency and growth rates by improvement of cell permeability as well as mass transfer and nutrient uptake rates through cell membranes. This review contains a summarized description about suitable microbial metabolites and the applications of ultrasound technique for enhancement of the production of these metabolites as well as the associated downstream processing.

Assessment and evaluation of cellulase production using ragi (Eleusine coracana) husk as a substrate from thermo-acidophilic Aspergillus fumigatus JCM 10253

The cellulase production by filamentous fungi Aspergillus fumigatus JCM 10253 was carried out using agro-industrial waste ragi husk as a substrate in the microbial fermentation. The effect of the process parameters such as temperature, substrate concentration, pH, and incubation process time and their interdependence was studied using response surface methodology. The optimum cellulase activities were obtained at 50 °C under the conditions with 1-2% of substrate concentration at pH 2-4 for the incubation period of 7-8 days. The maximum carboxymethyl cellulase (CMCase) and β-glucosidase activities with optimized process variables were 95.2 IU/mL and 0.174 IU/mL, respectively. The morphological characterization of fungus by scanning electron microscopy (SEM) and Fourier transform infrared spectroscopy (FTIR) revealed the presence of secondary protein structures. Furthermore, this study demonstrated that the application of ragi husk could be a promising feedstock for value-added industrial products. The thermo-acidophilic nature of isolated strain Aspergillus fumigatus JCM 10253 possessed a significant potential for higher titer of cellulase production that could be further employed for lignocellulosic bioethanol production.

Comprehensive Optimization of Culture Conditions for Production of Biomass-Hydrolyzing Enzymes of Trichoderma SG2 in Submerged and Solid-State Fermentation

Lignocellulose biomass contain large macromolecules especially cellulose and hemicelluloses that can be converted to fuel and chemicals using microbial biocatalysts. This study presents comprehensive optimization of production of biomass-hydrolyzing enzymes (BHE) by a high β-glucosidase-producing Trichoderma SG2 for bioconversion of lignocellulose biomass. Overall, a mixture of paper powder and switchgrass was most suited for production of BHE in submerged fermentation (SmF). BHE production was significantly different for various organic and inorganic nitrogen sources. The combination of peptone, yeast extract, and ammonium sulfate resulted in the highest activities (Units/mL) of BHE: 9.85 ± 0.55 cellulase, 38.91 ± 0.31 xylanase, 21.19 ± 1.35 β-glucosidase, and 7.63 ± 0.31 β-xylosidase. Surfactants comparably enhanced BHE production. The highest cellulase activity (4.86 ± 0.55) was at 25 °C, whereas 35 °C supported the highest activities of xylanase, β-glucosidase, and β-xylosidase. A broad initial culture pH (4-7) supported BHE production. The T_opt for cellulase and xylanase was 50 °C. β-xylosidase and β-glucosidase were optimally active at 40 and 70 °C, respectively; pH 5 resulted in highest cellulase, β-glucosidase, and β-xylosidase activities; and pH 6 resulted in highest xylanase activity. Response surface methodology (RSM) was used to optimize major medium ingredients. BHE activities were several orders of magnitude higher in solid-state fermentation (SSF) than in SmF. Therefore, SSF can be deployed for one-step production of complete mixture of Trichoderma SG2 BHE for bioconversion of biomass to saccharide feedstock.

A novel multi-enzyme preparation produced from Aspergillus niger using biodegradable waste: a possible option to combat heterogeneous biofilms

Extracellular polymeric substance (EPS) produced by the microorganisms provides protection and stability to them when they are encased within biofilms. Heterogeneous polysaccharides form a major constituent of the EPS and are crucial for the formation and integrity of the biofilms/slime. Thus, breakdown of polysaccharides might help in dispersion of biofilms from abiotic surfaces. In the present study we isolated a fungus, Aspergillus niger APS, capable of concurrently producing a cocktail of carbohydrases and optimized the conditions for higher yields of all the enzymes by one variable at a time (OVAT) approach. The optimization studies resulted in 1.5 to 12 fold augmentation in the enzyme yields using biodegradable waste. Further, keeping in view the heterogeneous nature of polysaccharides in biofilm matrix, the in-house produced enzyme cocktail was used for the dispersal of biofilms formed by Salmonella enterica serovar Typhi, Escherichia coli and Staphylococcus aureus. Treatment with enzyme preparation caused 90.23 ± 4.0, 82.64 ± 5.0 and 76.32 ± 5.0% reduction of the biofilms formed by these organisms respectively which was also evidenced by Field emission scanning electron microscopy (FESEM) revealing the loss of biofilm architecture. Interestingly, the enzyme cocktail could also remove viscous slime formed under natural conditions in the kitchen drainage pipe (KDP). To the best of our knowledge, this is the first report on biotreatment of abiotic surfaces for removal of biofilms/slime formed under natural conditions. The study thus indicates the prospects of using multiple carbohydrases as an anti-biofouling agent on abiotic surfaces like equipments as well as implants/prostheses and pipelines.

Banana Peels: A Promising Substrate for the Coproduction of Pectinase and Xylanase from Aspergillus fumigatus MS16

Banana peels (BP), an under-utilized waste material, was studied for the production of xylanase and pectinase by Aspergillus fumigates MS16. The factors affecting the co-production of both the enzymes were separately studied for their influence under submerged (Smf) and solid-state fermentation (SSF) of BP. The strain was cultivated in the presence of mineral salt (MS) solution containing BP powder as a sole source of carbon and physical and nutritional factors varied to observe the change in the enzyme titers. The data revealed that the MS-based medium was appropriate for the production of both the enzymes; therefore, in subsequent experiments, the same medium was used. A temperature of 30–35°C was found better for the production of the two enzymes under Smf; however, the titers of pectinase dropped significantly at 40°C. Contrarily, xylanase production was inhibited at 40°C under SSF but not under Smf. Whereas, supplementation of xylan or pectin to BP induced the production of xylanase and pectinase, respectively. Lowering the pH value favored the production of both the enzymes under Smf; however, the production of pectinase improved significantly when a higher concentration of BP (1%) was used compared to the concentration (0.25%) required for the production of xylanase. Interestingly, the enzyme preparation obtained under SSF exhibited optimal activities of both the enzymes at higher temperatures when compared to those obtained under Smf. The data indicated that the physiology of the fungus differed greatly when the cultivation pattern varied from Smf to SSF and, hence, the enzymes produced were characteristically distinct.

Studies on peroxidase production and detection of Sporotrichum thermophile-like catalase-peroxidase gene in a B acillus species isolated from Hogsback forest reserve, South Africa

This study sought to determine the process conditions for optimum peroxidase production by a Bacillus species (Bacillus sp. FALADE-1-KX640922) isolated from Hogsback forest reserve in South Africa and characterize the peroxidase gene in the bacteria. We optimized peroxidase production by manipulating the environmental and nutritional parameters under submerged fermentation. Subsequently, the gene encoding heme-peroxidase was determined through nested polymerase chain reaction and Sanger DNA sequencing. The studied bacteria had maximum peroxidase production at pH 8, 30 °C and 150 rpm. The addition of guaiacol to lignin fermentation medium enhanced peroxidase production by over 100 % in the studied bacteria. However, the other lignin monomers (veratryl alcohol, vanillin, vanillic acid and ferulic acid) repressed the enzyme activity. Modification of the fermentation medium with ammonium sulphate gave the maximum peroxidase yield (8.87 U mL⁻¹). Under the predetermined culture conditions, Bacillus sp. FALADE-1 expressed maximum specific peroxidase activity at 48 h (8.32 U mg⁻¹). Interestingly, a search of the sequenced gene in PeroxiBase showed 100% similarity to Sporotrichum thermophile catalase-peroxidase gene (katG), as well, the deduced protein sequence clustered with bacterial catalase-peroxidases and had a molecular weight of about 11.45 kDa with 7.01 as the estimated isoelectric point. Subsequently, the nucleotide sequence was deposited in the National Center for Biotechnology Information (NCBI) repository with the accession number MF407314. In conclusion, Bacillus sp. FALADE-1 is a promising candidate for improved peroxidase production.

Optimization of high endoglucanase yields production from polypore fungus, Microporus xanthopus strain KA038 under solid-state fermentation using green tea waste

Polypores are diverse macrofungi that have been extensively studied for their lignocellulolytic enzyme production capabilities. Currently, these enzymes are being used for many industrial purposes. However, the high cost associated with their production is the main barrier to their broader application. This work aimed to study the optimal medium and conditions for endoglucanase production using solid state fermentation. Seven polypore strains were used for endoglucanase activity screening. The fermentation experiments were carried out in 250 ml Erlenmeyer flasks with green tea waste as a substrate. Notably, Microporus xanthopus strain KA038 showed the best level of activity (38.62 IU/gds). Various parameters such as moisture content, nitrogen source, initial pH value, inoculum size and incubation time were considered to determine the optimal conditions for endoglucanase production. The optimal medium consisted of green tea leaves as a carbon source, beef extract as an organic nitrogen source, NH₄H₂PO₄ as an inorganic nitrogen source, pH 7.0 and an incubation temperature at 30°C for 4 days resulted in a high enzyme yield with M. xanthopus strain KA038 (81.8 IU/gds).This article has an associated First Person interview with the first author of the paper.

Microbial dynamics for lignocellulosic waste bioconversion and its importance with modern circular economy, challenges and future perspectives

An extensive use of microbial dynamics for utilizing the lignocellulosic wastes has been attributed to their efficiency in bioenergy and bioproducts development as a cost effective high nutritional value. The integration of lignocellulosic waste into the circular economy can scaleup the sustainable bioproducts and bioenergy development. In this review paper, the aim is to describe the existing research efforts on organic lignocellulosic waste, cellulase producing microbes, their potential enzyme, modern circular economy with associated challenges and future perspectives. Presently, it has been reviewed that microbial cellulases have provided treasure bioproducts visions into industrial bioproducts marvels unveiled through lignocellulosic waste cutting-edge microbial explorations. Furthermore, the review focused on new insights of the growing circular economy of lignocellulosic waste used for many bioproducts and bioenergy dealings and explored the emergent lignocellulosic biorefinery approaches which could then be applied to review industrial-scale sustainable economic models for upgraded bioproducts and other production associated problems.

Isolation of Cellulose Degrading Fungi from Decaying Banana Pseudostem and Strelitzia alba

Cellulases are a group of hydrolytic enzymes that break down cellulose to glucose units. These enzymes are used in the food, beverage, textile, pulp, and paper and the biofuel industries. The aim of this study was to isolate fungi from natural compost and produce cellulases in submerged fermentation (SmF). Initial selection was based on the ability of the fungi to grow on agar containing Avicel followed by cellulase activity determination in the form of endoglucanase and total cellulase activity. Ten fungal isolates obtained from the screening process showed good endoglucanase activity on carboxymethyl cellulose-Congo Red agar plates. Six of the fungal isolates were selected based on high total cellulase activity and identified as belonging to the genera Trichoderma and Aspergillus. In SmF of synthetic media with an initial pH of 6.5 at 30°C Trichoderma longibrachiatum LMLSAUL 14-1 produced total cellulase activity of 8 FPU/mL and endoglucanase activity of 23 U/mL whilst Trichoderma harzianum LMLBP07 13-5 produced 6 FPU/mL and endoglucanase activity of 16 U/mL. The produced levels of both cellulases and endoglucanase by Trichoderma species were higher than the levels for the Aspergillus fumigatus strains. Aspergillus fumigatus LMLPS 13-4 produced higher β-glucosidase 38 U/mL activity than Trichoderma species.

Involvement of lytic enzymes and secondary metabolites produced by Trichoderma spp. in the biological control of Pythium myriotylum

This investigation was aimed to evaluate the antimicrobial activities and involvement of extracellular lytic enzymes produced by four strains of Trichoderma in the inhibition of Pythium myriotylum. Antagonistic effects were tested by dual culture. Activities of lytic enzymes were evaluated from the filtrate of each strain after cultivation in selected media. Organic extracts were obtained from liquid media subsequent to the cultivation of Trichoderma in potato dextrose broth (PDB). Non-volatile organic compounds such as polyphenols and flavonoids were evaluated spectrophotometrically while volatile organic compounds (VOCs) were analyzed by gas chromatography coupled with mass spectrometry (GC-MS). The antimicrobial activity of the organic extracts was determined using the poisoning method. Results have shown that all the strains were antagonists against P. myriotylum. T. erinaceum (IT-58), T. gamsii (IT-62), T. afroharzianum (P8), and T. harzianum (P11) that were found to produce cellulase, protease, and xylanase. Over 20 compounds were identified in each extract, including esters, lactones, and organic acids. The organic extracts also contained high amounts of polyphenolic compounds and flavonoids and significantly inhibited the mycelial growth of P. myriotylum. The minimal inhibition concentrations were 80 μg/μL, 40 μg/μL, 20 μg/μL, and 10 μg/μL, for extracts obtained from T. erinaceum (IT-58), T. gamsii (IT-62), T. afroharzianum (P8), and T. harzianum (P11), respectively. There was significant correlation between the production of total polyphenol and flavonoid content and the antagonistic effects of the tested strains.

Saccharification of macroalgal polysaccharides through prioritized cellulase producing bacteria

Marine macroalgal cell wall is predominantly comprised of cellulose (polysaccharide) with the complex chain of glycosidic linkages. Bioethanol production from macroalgae entails breaking this complex chain into simple glucose molecule, which has been the major challenge faced by the industries. Cellulases have been preferred for hydrolysis of cellulose due to the absence of inhibitors affecting the subsequent fermentation process. Cellulose degrading bacteria were isolated from wide-ranging sources from marine habitats to herbivore residues and gastrointestinal region. The investigation reveals that Vibrio parahaemolyticus bacteria has higher hydrolytic capacity with salt tolerance up to 14% and 3.5% salinity is optimum for growth. Higher hydrolytic activity of 2.45 was recorded on carboxymethyl cellulose medium at 48 h and hydrolytic activity of 2.46 on Ulva intestinalis hydrolysate, 3.06 on Ulva lactuca hydrolysate at 72 h of incubation. Total activity of enzyme of 2.11 U/ml and specific activity of 6.05 U/mg were recorded at 24 h. Enzyme hydrolysis of macroalgal biomass; U. intestinalis and U. lactuca produced 135.9 mg/g and 107.6 mg/g of reducing sugar respectively. The study reveals that the enzyme extracted from salt tolerant Vibrio parahaemolyticus bacteria is suitable for optimal saccharification of seaweed polysaccharides towards biofuel production.

Comprehensive studies on optimization of cellulase and xylanase production by a local indigenous fungus strain via solid state fermentation using oil palm frond as substrate

The high cost of cellulases remains the most significant barrier to the economical production of bio-ethanol from lignocellulosic biomass. The goal of this study was to optimize cellulases and xylanase production by a local indigenous fungus strain (Aspergillus niger DWA8) using agricultural waste (oil palm frond [OPF]) as substrate. The enzyme production profile before optimization indicated that the highest carboxymethyl cellulose (CMCase), filter paper (FPase), and xylanase activities of 1.06 U/g, 2.55 U/g, and 2.93 U/g were obtained on day 5, day 4, and day 5 of fermentation, respectively. Response surface methodology was used to study the effects of several key process parameters in order to optimize cellulase production. Of the five physical and two chemical factors tested, only moisture content of 75% (w/w) and substrate amount of 2.5 g had statistically significant effect on enzymes production. Under optimized conditions of 2.5 g of substrate, 75% (w/w) moisture content, initial medium of pH 4.5, 1 × 10⁶ spores/mL of inoculum, and incubation at ambient temperature (±30°C) without additional carbon and nitrogen, the highest CMCase, FPase, and xylanase activities obtained were 2.38 U/g, 2.47 U/g, and 5.23 U/g, respectively. Thus, the optimization process increased CMCase and xylanase production by 124.5 and 78.5%, respectively. Moreover, A. niger DWA8 produced reasonably good cellulase and xylanase titers using OPF as the substrate when compared with previous researcher finding. The enzymes produced by this process could be further use to hydrolyze biomass to generate reducing sugars, which are the feedstock for bioethanol production.

Rice straw fermentation by Schizophyllum commune ARC-11 to produce high level of xylanase for its application in pre-bleaching

Rice straw is valuable resource that has been used as substrate for cost effective production of xylanase under solid-state fermentation by a newly isolated white rot fungi, S. commune ARC-11. Out of eleven carbon sources tested, rice straw was found most effective for the induction of xylanase that produced 4288.3 IU/gds of xylanase by S. commune ARC-11. Maximum xylanase production (6721.9 IU/gds) was observed on 8th day of incubation at temperature (30 °C), initial pH (7.0) and initial moisture content (70.0%). The supplementation of ammonium sulphate (0.08% N, as available nitrogen) enhanced the xylanase production up to 8591.4 IU/gds. The xylanase production by S. commune ARC-11 was further improved by the addition of 0.10%, (w/v) of Tween-20 as surfactant. The maximum xylanase activities were found at pH 5.0 and temperature 55 °C with a longer stability (180 min) at temperature 45, 50 and 55 °C. This xylanase preparation was also evaluated for the pre-bleaching of ethanol-soda pulp from Eulaliopsis binata. An enzyme dosage of 10 IU/g of xylanase resulted maximum decrease in kappa number (14.51%) with a maximum improvement 2.9% in ISO brightness compared to control.

Statistical based experimental optimization for co-production of endo-glucanase and xylanase from Bacillus sonorensis BD92 with their application in biomass saccharification

Endo-glucanase (cellulase) and xylanase have high industrial demand due to their vast application in industrial processes. This study reports statistical based experimental optimization for co-production of endo-glucanase and xylanase from Bacillus sonorensis BD92. Response surface methodology (RSM) involving central composite design (CCD) with full factorial experiments (2³) was applied to elucidate the components that significantly affect co-production of endo-glucanase and xylanase. The optimum co-production conditions for endo-glucanase and xylanase were as follows: carboxymethyl cellulose (CMC) 20 g/L, yeast extract 15 g/L, and time 72 h. The maximum endo-glucanase and xylanase production obtained was 1.46 and 5.69 U/mL, respectively, while the minimum endo-glucanase and xylanase production obtained was 0.66 and 0.25 U/mL, respectively. This statistical model was efficient because only 20 experimental runs were necessary to assess the highest production conditions, and the model accuracy was very satisfactory as coefficient of determination (R²) was 0.95 and 0.89 for endo-glucanase and xylanase, respectively. Further, potential application of these enzymes for saccharification of lignocellulosic biomass (wheat bran, wheat straw, rice straw, and cotton stalk) was also investigated. The results revealed that the biomass was susceptible to enzymatic saccharification and the amount of reducing sugars (glucose and xylose) increased with increase in incubation time. In conclusion, Bacillus sonorensis BD92 reveals a promise as a source of potential endo-glucanase and xylanase producer that could be useful for degrading plant biomass into value-added products of economic importance using precise statistically optimized conditions.

Inhibition and kinetic studies of cellulose- and hemicellulose-degrading enzymes of Ganoderma boninense by naturally occurring phenolic compounds

AIM

Ganoderma sp, the causal pathogen of the basal stem rot (BSR) disease of oil palm, secretes extracellular hydrolytic enzymes. These play an important role in the pathogenesis of BSR by nourishing the pathogen through the digestion of cellulose and hemicellulose of the host tissue. Active suppression of hydrolytic enzymes secreted by Ganoderma boninense by various naturally occurring phenolic compounds and estimation of their efficacy on pathogen suppression is focused in this study.

METHODS AND RESULTS

Ten naturally occurring phenolic compounds were assessed for their inhibitory effect on the hydrolytic enzymes of G. boninense. The enzyme kinetics (V_max and K_m ) and the stability of the hydrolytic enzymes were also characterized. The selected compounds had shown inhibitory effect at various concentrations. Two types of inhibitions namely uncompetitive and noncompetitive were observed in the presence of phenolic compounds. Among all the phenolic compounds tested, benzoic acid was the most effective compound suppressive to the growth and production of hydrolytic enzymes secreted by G. boninense. The phenolic compounds as inhibitory agents can be a better replacement for the metal ions which are known as conventional inhibitors till date. The three hydrolytic enzymes were stable in a wide range of pH and temperature.

CONCLUSION

These findings highlight the efficacy of the applications of phenolic compounds to control Ganoderma.

SIGNIFICANCE AND IMPACT OF THE STUDY

The study has proved a replacement for chemical controls of G. boninense with naturally occurring phenolic compounds.

Improved endoglucanase production and mycelial biomass of some ericoid fungi

Fungal species associated with ericaceous plant roots produce a number of enzymes and other bio-active metabolites in order to enhance survival of their host plants in natural environments. This study focussed on endoglucanase production from root associated ericoid mycorrhizal and dark septate endophytic fungal isolates. Out of the five fungal isolates screened, Leohumicola sp. (ChemRU330/PPRI 13195) had the highest relative enzyme activity and was tested along with isolates belonging to Hyloscyphaceae (EdRU083/PPRI 17284) and Leotiomycetes (EdRU002/PPRI 17261) for endoglucanase production under different pH and nutritional conditions that included: carbon sources, nitrogen sources and metal ions, at an optimum temperature of 28 °C. An optimal of pH 5.0 produced enzyme activity of 3.99, 2.18 and 4.31 (U/mg protein) for isolates EdRU083, EdRU002 and Leohumicola sp. respectively. Increased enzyme activities and improved mycelial biomass production were obtained in the presence of supplements such as potassium, sodium, glucose, maltose, cellobiose, tryptone and peptone. While NaFe-EDTA and Co2+ inhibited enzyme activity. The potential role of these fungi as a source of novel enzymes is an ongoing objective of this study.

Trichoderma virens β-glucosidase I (BGLI) gene; expression in Saccharomyces cerevisiae including docking and molecular dynamics studies

BACKGROUND

Cellulose, a linear polymer of β 1-4, linked glucose, is the most abundant renewable fraction of plant biomass (lignocellulose). It is synergistically converted to glucose by endoglucanase (EG) cellobiohydrolase (CBH) and β-glucosidase (BGL) of the cellulase complex. BGL plays a major role in the conversion of randomly cleaved cellooligosaccharides into glucose. As it is well known, Saccharomyces cerevisiae can efficiently convert glucose into ethanol under anaerobic conditions. Therefore, S.cerevisiae was genetically modified with the objective of heterologous extracellular expression of the BGLI gene of Trichoderma virens making it capable of utilizing cellobiose to produce ethanol.

RESULTS

The cDNA and a genomic sequence of the BGLI gene of Trichoderma virens was cloned in the yeast expression vector pGAPZα and separately transformed to Saccharomyces cerevisiae. The size of the BGLI cDNA clone was 1363 bp and the genomic DNA clone contained an additional 76 bp single intron following the first exon. The gene was 90% similar to the DNA sequence and 99% similar to the deduced amino acid sequence of 1,4-β-D-glucosidase of T. atroviride (AC237343.1). The BGLI activity expressed by the recombinant genomic clone was 3.4 times greater (1.7 x 10-3 IU ml-1) than that observed for the cDNA clone (5 x 10-4 IU ml-1). Furthermore, the activity was similar to the activity of locally isolated Trichoderma virens (1.5 x 10-3 IU ml-1). The estimated size of the protein was 52 kDA. In fermentation studies, the maximum ethanol production by the genomic and the cDNA clones were 0.36 g and 0.06 g /g of cellobiose respectively. Molecular docking results indicated that the bare protein and cellobiose-protein complex behave in a similar manner with considerable stability in aqueous medium. The deduced binding site and the binding affinity of the constructed homology model appeared to be reasonable. Moreover, it was identified that the five hydrogen bonds formed between the amino acid residues of BGLI and cellobiose are mainly involved in the integrity of enzyme-substrate association.

CONCLUSIONS

The BGLI activity was remarkably higher in the genomic DNA clone compared to the cDNA clone. Cellobiose was successfully fermented into ethanol by the recombinant S.cerevisiae genomic DNA clone. It has the potential to be used in the industrial production of ethanol as it is capable of simultaneous saccharification and fermentation of cellobiose. Homology modeling, docking studies and molecular dynamics simulation studies will provide a realistic model for further studies in the modification of active site residues which could be followed by mutation studies to improve the catalytic action of BGLI.