1
|
Atalar O, Arbabian A. Polarization-insensitive wide-angle resonant acousto-optic phase modulator. Opt Lett 2024; 49:2141-2144. [PMID: 38621096 DOI: 10.1364/ol.514333] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/15/2023] [Accepted: 03/24/2024] [Indexed: 04/17/2024]
Abstract
Phase modulators are commonly used devices in optics. Free-space phase modulators are typically constructed from optically anisotropic crystals exhibiting the Pockels effect. To preserve the light's polarization state as it propagates through the crystal, it is essential to align the polarization and the angle of incidence of the light with respect to the crystal. In this study, we demonstrate the feasibility of constructing free-space resonant phase modulators with a broad acceptance angle and minimal dependence on the polarization state of light using an acousto-optic approach. These modulators operate in the megahertz frequency range, require modest power levels, have aperture sizes exceeding 1 cm2, and feature sub-millimeter thickness.
Collapse
|
2
|
Baltsavias S, Van Treuren W, Sawaby A, Baker SW, Sonnenburg JL, Arbabian A. Gut Microbiome Redox Sensors With Ultrasonic Wake-Up and Galvanic Coupling Wireless Links. IEEE Trans Biomed Eng 2023; 70:76-87. [PMID: 35727787 PMCID: PMC9911315 DOI: 10.1109/tbme.2022.3184972] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/07/2022]
Abstract
Tools to measure in vivo redox activity of the gut microbiome and its influence on host health are lacking. In this paper, we present the design of new in vivo gut oxidation-reduction potential (ORP) sensors for rodents, to study host-microbe and microbe-environment interactions throughout the gut. These are the first in vivo sensors to combine ultrasonic wake-up and galvanic coupling telemetry, allowing for sensor miniaturization, experiment flexibility, and robust wireless measurements in live rodents. A novel study of in situ ORP along the intestine reveals biogeographical redox features that the ORP sensors can uniquely access in future gut microbiome studies.
Collapse
|
3
|
Atalar O, Yee S, Safavi-Naeini AH, Arbabian A. Y-Z cut lithium niobate longitudinal piezoelectric resonant photoelastic modulator. Opt Express 2022; 30:47103-47114. [PMID: 36558647 DOI: 10.1364/oe.476970] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/13/2022] [Accepted: 11/23/2022] [Indexed: 06/17/2023]
Abstract
The capability to modulate the intensity of an optical beam has scientific and practical significance. In this work, we demonstrate Y-Z cut lithium niobate acousto-optic modulators with record-high modulation efficiency, requiring only 1.5 W/cm2 for 100% modulation at 7 MHz. These modulators use a simple fabrication process; coating the top and bottom surfaces of a thin lithium niobate wafer with transparent electrodes. The fundamental shear acoustic mode of the wafer is excited through the transparent electrodes by applying voltage with frequency corresponding to the resonant frequency of this mode, confining an acoustic standing wave to the electrode region. Polarization of light propagating through this region is modulated at the applied frequency. Polarization modulation is converted to intensity modulation by placing the modulator between polarizers. To showcase an important application space for this modulator, we integrate it with a standard image sensor and demonstrate 4 megapixel time-of-flight imaging.
Collapse
|
4
|
So E, Yeon P, Chichilnisky EJ, Arbabian A. An RF-Ultrasound Relay for Adaptive Wireless Powering Across Tissue Interfaces. IEEE J Solid-State Circuits 2022; 57:3429-3441. [PMID: 37138581 PMCID: PMC10153624 DOI: 10.1109/jssc.2022.3171233] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/05/2023]
Abstract
Single modality wireless power transfer has limited depth for mm-sized implants across air / tissue or skull / tissue interfaces because they either suffer from high loss in tissue (RF, Optical) or high reflection at the medium interface (Ultrasound (US)). This paper proposes an RF-US relay chip at the media interface avoiding the reflection at the boundary, and enabling efficient wireless powering to mm-sized deep implants across multiple media. The relay chip rectifies the incoming RF power through an 85.5% efficient RF inductive link (across air) using a multi-output regulating rectifier (MORR) with 81% power conversion efficiency (PCE) at 186 mW load, and transmits ultrasound using adiabatic power amplifiers (PAs) to the implant in order to minimize cascaded power loss. To adapt the US focus to implant movement or placement, beamforming was implemented using 6 channels of US PAs with 2-bit phase control (0, 90, 180, and 270°) and 3 different amplitudes (6-29, 4.5, and 1.8 V) from the MORR. The adiabatic PA contributes a 30-40% increase in efficiency over class-D and beamforming increases the efficiency by 251% at 2.5 cm over fixed focusing. The proof-of-concept powering system for a retinal implant, from an external PA on a pair of glasses to a hydrophone with 1.2 cm (air) + 2.9 cm (agar eyeball phantom in mineral oil) separation distance, had a power delivered to the load (PDL) of 946 μW. The 2.3 × 2 mm2 relay chip was fabricated in a 180 nm high-voltage (HV) BCD process.
Collapse
Affiliation(s)
- Ernest So
- Department of Electrical Engineering, Stanford University, Stanford, CA 94305 USA
| | - Pyungwoo Yeon
- Department of Electrical Engineering, Stanford University, Stanford, CA 94305 USA
| | - E J Chichilnisky
- Department of Electrical Engineering, Stanford University, Stanford, CA 94305 USA
| | - Amin Arbabian
- Department of Electrical Engineering, Stanford University, Stanford, CA 94305 USA
| |
Collapse
|
5
|
Wang ML, Chamberlayne CF, Xu H, Mofidfar M, Baltsavias S, Annes JP, Zare RN, Arbabian A. On-demand electrochemically controlled compound release from an ultrasonically powered implant. RSC Adv 2022; 12:23337-23345. [PMID: 36090393 PMCID: PMC9382542 DOI: 10.1039/d2ra03422k] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/01/2022] [Accepted: 08/09/2022] [Indexed: 11/21/2022] Open
Abstract
On-demand drug delivery systems are promising for a wide range of therapeutic applications. When combined with wireless implants for controlled drug delivery, they can reduce overall dosage and side effects. Here, we demonstrate release of fluorescein from a novel on-demand release system for negatively charged compounds. The release system is based on a modified electroresponsive polypyrrole nanoparticulate film designed to minimize ion exchange with the stored compound - a major passive leakage mechanism. We further designed an ultrasonically powered mm-sized implant to electronically control the on-demand drug delivery system in vivo. Release kinetics are characterized both in vitro and in vivo in mice using fluorescein as a model drug, demonstrating the feasibility of wireless, controllable drug release using an ultrasonically powered implant.
Collapse
Affiliation(s)
- Max L Wang
- Department of Electrical Engineering, Stanford University Stanford CA USA
| | | | - Haixia Xu
- Department of Medicine, Division of Endocrinology, Stanford University Stanford CA USA
| | | | | | - Justin P Annes
- Department of Medicine, Division of Endocrinology, Stanford University Stanford CA USA
| | - Richard N Zare
- Department of Chemistry, Stanford University Stanford CA USA
| | - Amin Arbabian
- Department of Electrical Engineering, Stanford University Stanford CA USA
| |
Collapse
|
6
|
Atalar O, Van Laer R, Safavi-Naeini AH, Arbabian A. Longitudinal piezoelectric resonant photoelastic modulator for efficient intensity modulation at megahertz frequencies. Nat Commun 2022; 13:1526. [PMID: 35318321 PMCID: PMC8941116 DOI: 10.1038/s41467-022-29204-9] [Citation(s) in RCA: 4] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 06/21/2021] [Accepted: 02/07/2022] [Indexed: 11/25/2022] Open
Abstract
Intensity modulators are an essential component in optics for controlling free-space beams. Many applications require the intensity of a free-space beam to be modulated at a single frequency, including wide-field lock-in detection for sensitive measurements, mode-locking in lasers, and phase-shift time-of-flight imaging (LiDAR). Here, we report a new type of single frequency intensity modulator that we refer to as a longitudinal piezoelectric resonant photoelastic modulator. The modulator consists of a thin lithium niobate wafer coated with transparent surface electrodes. One of the fundamental acoustic modes of the modulator is excited through the surface electrodes, confining an acoustic standing wave to the electrode region. The modulator is placed between optical polarizers; light propagating through the modulator and polarizers is intensity modulated with a wide acceptance angle and record breaking modulation efficiency in the megahertz frequency regime. As an illustration of the potential of our approach, we show that the proposed modulator can be integrated with a standard image sensor to effectively convert it into a time-of-flight imaging system. Optical intensity modulators are an important component in optics. Here, the authors demonstrate a type of resonant intensity modulator operating in the megahertz frequency regime with record high efficiency and use it for time-of-flight imaging.
Collapse
Affiliation(s)
- Okan Atalar
- Department of Electrical Engineering, Stanford University, Stanford, CA, 94305, USA.
| | - Raphaël Van Laer
- Department of Applied Physics and Ginzton Laboratory, Stanford University, Stanford, CA, 94305, USA.,Department of Microtechnology and Nanoscience (MC2), Chalmers University of Technology, Gothenburg, Sweden
| | - Amir H Safavi-Naeini
- Department of Applied Physics and Ginzton Laboratory, Stanford University, Stanford, CA, 94305, USA
| | - Amin Arbabian
- Department of Electrical Engineering, Stanford University, Stanford, CA, 94305, USA
| |
Collapse
|
7
|
Chien JC, Baker SW, Soh HT, Arbabian A. Design and Analysis of a Sample-and-Hold CMOS Electrochemical Sensor for Aptamer-based Therapeutic Drug Monitoring. IEEE J Solid-State Circuits 2020; 55:2914-2929. [PMID: 33343021 PMCID: PMC7742970 DOI: 10.1109/jssc.2020.3020789] [Citation(s) in RCA: 11] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/06/2023]
Abstract
In this paper, we present the design and the analysis of an electrochemical circuit for measuring the concentrations of therapeutic drugs using structure-switching aptamers. Aptamers are single-stranded nucleic acids, whose sequence is selected to exhibit high affinity and specificity toward a molecular target, and change its conformation upon binding. This property, when coupled with a redox reporter and electrochemical detection, enables reagent-free biosensing with a sub-minute temporal resolution for in vivo therapeutic drug monitoring. Specifically, we design a chronoamperometry-based electrochemical circuit that measures the direct changes in the electron transfer (ET) kinetics of a methylene blue reporter conjugated at the distal-end of the aptamer. To overcome the high-frequency noise amplification issue when interfacing with a large-size (> 0.25 mm2) implantable electrode, we present a sample-and-hold (S/H) circuit technique in which the desired electrode potentials are held onto noiseless capacitors during the recording of the redox currents. This allows disconnecting the feedback amplifiers to avoid its noise injection while reducing the total power consumption. A prototype circuit implemented in 65-nm CMOS demonstrates a cell-capacitance-insensitive input-referred noise (IRN) current of 15.2 pArms at a 2.5-kHz filtering bandwidth. We tested our system in human whole blood samples and measured the changes in the ET kinetics from the redox-labeled aptamers at different kanamycin concentrations. By employing principal component analysis (PCA) to compensate for the sampling errors, we report a molecular noise floor (at SNR = 1) of 3.1 µM with sub 1-sec acquisition time at 0.22-mW power consumption.
Collapse
Affiliation(s)
- Jun-Chau Chien
- Department of Electrical Engineering, Stanford University, Stanford, CA 94305 USA
| | - Sam W Baker
- Department of Comparative Medicine, Stanford University, Stanford, CA 94305 USA
| | - H Tom Soh
- Department of Radiology and the Department of Electrical Engineering, Stanford University, Stanford, CA 94305 USA
| | - Amin Arbabian
- Department of Electrical Engineering, Stanford University, Stanford, CA 94305 USA
| |
Collapse
|
8
|
Baltsavias S, Van Treuren W, Weber MJ, Charthad J, Baker S, Sonnenburg JL, Arbabian A. In Vivo Wireless Sensors for Gut Microbiome Redox Monitoring. IEEE Trans Biomed Eng 2020; 67:1821-1830. [PMID: 31634824 PMCID: PMC7170758 DOI: 10.1109/tbme.2019.2948575] [Citation(s) in RCA: 8] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/26/2023]
Abstract
A perturbed gut microbiome has recently been linked with multiple disease processes, yet researchers currently lack tools that can provide in vivo, quantitative, and real-time insight into these processes and associated host-microbe interactions. We propose an in vivo wireless implant for monitoring gastrointestinal tract redox states using oxidation-reduction potentials (ORP). The implant is powered and conveniently interrogated via ultrasonic waves. We engineer the sensor electronics, electrodes, and encapsulation materials for robustness in vivo, and integrate them into an implant that endures autoclave sterilization and measures ORP for 12 days implanted in the cecum of a live rat. The presented implant platform paves the way for long-term experimental testing of biological hypotheses, offering new opportunities for understanding gut redox pathophysiology mechanisms, and facilitating translation to disease diagnosis and treatment applications.
Collapse
|
9
|
Vo J, Chang TC, Shea KI, Myers M, Arbabian A, Vasudevan S. Assessment of miniaturized ultrasound-powered implants: an in vivo study. J Neural Eng 2020; 17:016072. [DOI: 10.1088/1741-2552/ab6fc2] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/30/2022]
|
10
|
Atalar O, Van Laer R, Sarabalis CJ, Safavi-Naeini AH, Arbabian A. Time-of-flight imaging based on resonant photoelastic modulation: publisher's note. Appl Opt 2020; 59:1430. [PMID: 32225397 DOI: 10.1364/ao.389202] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/24/2020] [Indexed: 06/10/2023]
Abstract
This publisher's note corrects the Funding section in Appl. Opt.58, 2235 (2019)APOPAI0003-693510.1364/AO.58.002235.
Collapse
|
11
|
Abstract
Multi-access networking with miniaturized wireless implantable devices can enable and advance closed-loop medical applications to deliver precise diagnosis and treatment. Using ultrasound (US) for wireless implant systems is an advantageous approach as US can beamform with high spatial resolution to efficiently power and address multiple implants in the network. To demonstrate these capabilities, we use wirelessly powered mm-sized implants with bidirectional communication links; uplink data communication measurements are performed using time, spatial, and frequency-division multiplexing schemes in tissue phantom. A 32-channel linear transmitter array and an external receiver are used as a base station to network with two implants that are placed 6.5 cm deep and spaced less than 1 cm apart. Successful wireless powering and uplink data communication around 100 kbps with a measured bit error rate below 10-4 are demonstrated for all three networking schemes, validating the multi-access networking feasibility of US wireless implant systems.
Collapse
Affiliation(s)
- Ting Chia Chang
- Electrical Engineering, Stanford University, Stanford, CA, 94305, USA
| | - Max Wang
- Electrical Engineering, Stanford University, Stanford, CA, 94305, USA
| | - Amin Arbabian
- Electrical Engineering, Stanford University, Stanford, CA, 94305, USA
| |
Collapse
|
12
|
Singhvi A, Boyle KC, Fallahpour M, Khuri-Yakub BT, Arbabian A. A Microwave-Induced Thermoacoustic Imaging System With Non-Contact Ultrasound Detection. IEEE Trans Ultrason Ferroelectr Freq Control 2019; 66:1587-1599. [PMID: 31251184 DOI: 10.1109/tuffc.2019.2925592] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
Portable and easy-to-use imaging systems are in high demand for medical, security screening, nondestructive testing, and sensing applications. We present a new microwave-induced thermoacoustic imaging system with non-contact, airborne ultrasound (US) detection. In this system, a 2.7 GHz microwave excitation causes differential heating at interfaces with dielectric contrast, and the resulting US signal via the thermoacoustic effect travels out of the sample to the detector in air at a standoff. The 65 dB interface loss due to the impedance mismatch at the air-sample boundary is overcome with high-sensitivity capacitive micromachined ultrasonic transducers with minimum detectable pressures (MDPs) as low as 278 μ Pa rms and we explore two different designs-one operating at a center frequency of 71 kHz and another at a center frequency of 910 kHz. We further demonstrate that the air-sample interface presents a tradeoff with the advantage of improved resolution, as the change in wave velocity at the interface creates a strong focusing effect alongside the attenuation, resulting in axial resolutions more than 10× smaller than that predicted by the traditional speed/bandwidth limit. A piecewise synthetic aperture radar (SAR) algorithm modified for US imaging and enhanced with signal processing techniques is used for image reconstruction, resulting in mm-scale lateral and axial image resolution. Finally, measurements are conducted to verify simulations and demonstrate successful system performance.
Collapse
|
13
|
Wang ML, Chang TC, Arbabian A. Ultrasonic Implant Localization for Wireless Power Transfer: Active Uplink and Harmonic Backscatter. IEEE Int Ultrason Symp 2019; 2019:818-821. [PMID: 31988699 PMCID: PMC6984372] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Efficient ultrasonic power transfer to implantable devices requires precise transmitter beamforming to the receiver and can quickly degrade with small changes in implant location. Ultrasound localization can be used to find and track implants in the body to maintain an efficient link. We present a framework to calculate localization accuracy showing that sub-mm accuracy is obtainable using only three receive channels. A harmonic backscatter approach, which passively provides contrast in the frequency domain without active load modulation is compared to active uplink from the implant. The localization accuracy using both active uplink and harmonic backscatter from the implant power receiver is characterized using a linear array probe. The measured location standard deviation is nearly two orders of magnitude smaller than the half-power beamwidth of the array focal spot. Finally, beamforming using the measured location information increases the available power by over 20 × compared to an unfocused beam.
Collapse
Affiliation(s)
- Max L Wang
- Department of Electrical Engineering, Stanford University, Stanford, CA, USA
| | - Ting Chia Chang
- Department of Electrical Engineering, Stanford University, Stanford, CA, USA
| | - Amin Arbabian
- Department of Electrical Engineering, Stanford University, Stanford, CA, USA
| |
Collapse
|
14
|
Nan H, Fitzpatrick A, Wang K, Arbabian A. Non-Invasive Remote Temperature Monitoring Using Microwave-Induced Thermoacoustic Imaging. Annu Int Conf IEEE Eng Med Biol Soc 2019; 2019:6375-6378. [PMID: 31947301 DOI: 10.1109/embc.2019.8857309] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
Non-invasive temperature monitoring of tissue at depth in real-time is critical to hyperthermia therapies such as high-intensity focused ultrasound. Knowledge of temperature allows for monitoring treatment as well as providing real-time feedback to adjust deposited power in order to maintain safe and effective temperatures. Microwave-induced thermoacoustic (TA) imaging, which combines the conductivity/dielectric contrast of microwave imaging with the resolution of ultrasound, shows potential for estimating temperature non-invasively in real-time by indirectly measuring the temperature dependent parameters from reconstructed images. In this work, we study the temperature dependent behavior of the generated pressure in the TA effect and experimentally demonstrate simultaneous imaging and temperature monitoring using TA imaging. The proof-of-concept experiments demonstrate millimeter spatial resolution while achieving degree-level accuracy.
Collapse
|
15
|
Razavi J, Arbabian A. Chromatic Properties of Blood During Coagulation. Annu Int Conf IEEE Eng Med Biol Soc 2019; 2019:4733-4736. [PMID: 31946919 DOI: 10.1109/embc.2019.8856365] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
This paper proposes a method of detecting blood clots by analyzing the chromatic properties of blood. Measurements are performed with a Basler camera on blood during coagulation to determine the changes in red, green, and blue (RGB) values. Results show that there is a significant change in the red value that can be exploited for real-time, early detection of blood clots.
Collapse
|
16
|
Atalar O, Van Laer R, Sarabalis CJ, Safavi-Naeini AH, Arbabian A. Time-of-flight imaging based on resonant photoelastic modulation. Appl Opt 2019; 58:2235-2247. [PMID: 31044926 DOI: 10.1364/ao.58.002235] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/30/2018] [Accepted: 02/13/2019] [Indexed: 06/09/2023]
Abstract
A time-of-flight imaging system is proposed and its working principle demonstrated. To realize this system, a new device, a free-space optical mixer, is designed and fabricated. A scene is illuminated (flashed) with a megahertz-level amplitude-modulated light source, and the reflected light from the scene is collected by a receiver. The receiver consists of the free-space optical mixer, comprising a photoelastic modulator sandwiched between polarizers, placed in front of a standard complementary metal-oxide-semiconductor (CMOS) image sensor. This free-space optical mixer downconverts the megahertz-level amplitude modulation frequencies into the temporal bandwidth of the image sensor. A full-scale extension of the demonstrated system will be able to measure phases and Doppler shifts for the beat tones and use signal processing techniques to estimate the distance and velocity of each point in the illuminated scene with high accuracy.
Collapse
|
17
|
Chang TC, Weber MJ, Charthad J, Baltsavias S, Arbabian A. End-to-End Design of Efficient Ultrasonic Power Links for Scaling Towards Submillimeter Implantable Receivers. IEEE Trans Biomed Circuits Syst 2018; 12:1100-1111. [PMID: 30235147 PMCID: PMC6269189 DOI: 10.1109/tbcas.2018.2871470] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/21/2023]
Abstract
We present an analytical framework for optimizing the efficiency of ultrasonic wireless power links for implantable devices scaled down to sub-mm dimensions. Key design insights and tradeoffs are considered for various parameters including the operating frequency, the transmission depth, the size of the transmitter, the impedance and the aperture efficiency of the miniaturized receiver, and the interface between the receiver and the power recovery chain on the implant. The performance of spherically focused transducers as ultrasonic transmitters is analyzed to study the limits and the tradeoffs. Two optimization methods are presented: "Focal Peak" sets the focus of transducers at target depths, and "Global Maximum" maximizes the efficiency globally with off-focus operation. The results are also compared to phased array implementations. To investigate the efficiency of implants, miniaturized receivers made from single crystalline piezoelectric material, PMN-PT, are used as they have resonances in the derived optimal carrier frequency range (∼1-2 MHz). A methodology to achieve an efficient interface to the power electronics is then provided using an optogenetic stimulator as an example platform. The analytical results are verified through both simulations and measurements. Finally, an example ultrasonic link using a spherical transmitter with a radius of 2 cm is demonstrated; link efficiencies of 1.93-0.23% are obtained at 6-10 cm depths with sub-mm receivers for the optogenetic application.
Collapse
|
18
|
Kang C, Chang TC, Vo J, Charthad J, Weber M, Arbabian A, Vasudevan S. Long-term in vivo performance of novel ultrasound powered implantable devices. Annu Int Conf IEEE Eng Med Biol Soc 2018; 2018:2985-2988. [PMID: 30441025 DOI: 10.1109/embc.2018.8512978] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/09/2023]
Abstract
Neuromodulation devices have been approved for the treatment of epilepsy and seizures, with many other applications currently under research investigation. These devices rely on implanted battery powered pulse generators, that require replacement over time. Miniaturized ultrasound powered implantable devices have the potential to eliminate the need for batteries in neuromodulation devices. While these devices have been assessed in vitro, long-term in vivo assessment is required to determine device safety and performance. In this study, we developed a multi-stage long-term test platform to assess the performance of miniaturized ultrasound powered implantable devices.
Collapse
|
19
|
Walden C, Soneson J, Weber MJ, Charthad J, Chia Chang T, Arbabian A, Myers M. Thermal analysis of ultrasound-powered miniaturized implants: A tissue-phantom study. J Acoust Soc Am 2018; 143:3373. [PMID: 29960486 DOI: 10.1121/1.5040470] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
Neurological implants that harvest ultrasound power have the potential to provide long-term stimulation without complications associated with battery power. An important safety question associated with long-term operation of the implant involves the heat generated by the interaction of the device with the ultrasound field. A study was performed in which the temperature rise generated by this interaction was measured. Informed by temperature data from thermocouples outside the ultrasound beam, a mathematical inverse method was used to determine the volume heat source generated by ultrasound absorption within the implant as well as the surface heat source generated within the viscous boundary layer on the surface of the implant. For the test implant used, it was determined that most of the heat was generated in the boundary layer, giving a maximum temperature rise ∼5 times that for absorption in an equivalent volume of soft tissue. This result illustrates that thermal safety guidelines based solely on ultrasound absorption of tissue alone are not sufficient. The method presented represents an alternative approach for quantifying ultrasound thermal effects in the presence of implants. The analysis shows a steady temperature rise of about 0.2 °C for every 100 mW/cm2 for the presented test implant.
Collapse
Affiliation(s)
- Candace Walden
- Electrical and Computer Engineering, University of Maryland, 8228 Paint Branch Drive, College Park, Maryland 20742, USA
| | - Joshua Soneson
- Division of Applied Mechanics, Office of Science and Engineering Laboratories, Center for Devices and Radiological Health, United States Food and Drug Administration, 10903 New Hampshire Avenue, Silver Spring, Maryland 20993, USA
| | - Marcus J Weber
- Department of Electrical Engineering, Stanford University, 420 Via Palou, Stanford, California 94305-4070, USA
| | - Jayant Charthad
- Department of Electrical Engineering, Stanford University, 420 Via Palou, Stanford, California 94305-4070, USA
| | - Ting Chia Chang
- Department of Electrical Engineering, Stanford University, 420 Via Palou, Stanford, California 94305-4070, USA
| | - Amin Arbabian
- Department of Electrical Engineering, Stanford University, 420 Via Palou, Stanford, California 94305-4070, USA
| | - Matthew Myers
- Division of Applied Mechanics, Office of Science and Engineering Laboratories, Center for Devices and Radiological Health, United States Food and Drug Administration, 10903 New Hampshire Avenue, Silver Spring, Maryland 20993, USA
| |
Collapse
|
20
|
Charthad J, Chang TC, Liu Z, Sawaby A, Weber MJ, Baker S, Gore F, Felt SA, Arbabian A. A mm-Sized Wireless Implantable Device for Electrical Stimulation of Peripheral Nerves. IEEE Trans Biomed Circuits Syst 2018; 12:257-270. [PMID: 29578414 DOI: 10.1109/tbcas.2018.2799623] [Citation(s) in RCA: 77] [Impact Index Per Article: 12.8] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/05/2023]
Abstract
A wireless electrical stimulation implant for peripheral nerves, achieving >10× improvement over state of the art in the depth/volume figure of merit, is presented. The fully integrated implant measures just 2 mm × 3 mm × 6.5 mm (39 mm3, 78 mg), and operates at a large depth of 10.5 cm in a tissue phantom. The implant is powered using ultrasound and includes a miniaturized piezoelectric receiver (piezo), an IC designed in 180 nm HV BCD process, an off-chip energy storage capacitor, and platinum stimulation electrodes. The package also includes an optional blue light-emitting diode for potential applications in optogenetic stimulation in the future. A system-level design strategy for complete operation of the implant during the charging transient of the storage capacitor, as well as a unique downlink command/data transfer protocol, is presented. The implant enables externally programmable current-controlled stimulation of peripheral nerves, with a wide range of stimulation parameters, both for electrical (22 to 5000 μA amplitude, ∼14 to 470 μs pulse-width, 0 to 60 Hz repetition rate) and optical (up to 23 mW/mm2 optical intensity) stimulation. Additionally, the implant achieves 15 V compliance voltage for chronic applications. Full integration of the implant components, end-to-end in vitro system characterizations, and results for the electrical stimulation of a sciatic nerve, demonstrate the feasibility and efficacy of the proposed stimulator for peripheral nerves.
Collapse
|
21
|
Rekhi AS, Khuri-Yakub BT, Arbabian A. Wireless Power Transfer to Millimeter-Sized Nodes Using Airborne Ultrasound. IEEE Trans Ultrason Ferroelectr Freq Control 2017; 64:1526-1541. [PMID: 28796616 DOI: 10.1109/tuffc.2017.2737620] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/07/2023]
Abstract
We propose the use of airborne ultrasound for wireless power transfer to mm-sized nodes, with intended application in the next generation of the Internet of Things (IoT). We show through simulation that ultrasonic power transfer can deliver 50 [Formula: see text] to a mm-sized node 0.88 m away from a ~ 50-kHz, 25-cm2 transmitter array, with the peak pressure remaining below recommended limits in air, and with load power increasing with transmitter area. We report wireless power recovery measurements with a precharged capacitive micromachined ultrasonic transducer, demonstrating a load power of 5 [Formula: see text] at a simulated distance of 1.05 m. We present aperture efficiency, dynamic range, and bias-free operation as key metrics for the comparison of transducers meant for wireless power recovery. We also argue that long-range wireless charging at the watt level is extremely challenging with existing technology and regulations. Finally, we compare our acoustic powering system with cutting edge electromagnetically powered nodes and show that ultrasound has many advantages over RF as a vehicle for power delivery. Our work sets the foundation for further research into ultrasonic wireless power transfer for the IoT.
Collapse
|
22
|
Charthad J, Baltsavias S, Samanta D, Weber MJ, Hosseini-Nassab N, Zare RN, Arbabian A. An ultrasonically powered implantable device for targeted drug delivery. Annu Int Conf IEEE Eng Med Biol Soc 2017; 2016:541-544. [PMID: 28324933 DOI: 10.1109/embc.2016.7590759] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Abstract
A wirelessly powered implantable device is proposed for fully programmable and localized drug delivery. The implant is powered using an external ultrasonic transmitter and operates at <; 5% of the FDA diagnostic ultrasound intensity limit. Drug release is achieved through electrical stimulation of drug-loaded polypyrrole nanoparticles. A design methodology for the implant electronics is presented and experimentally demonstrated to be accurate in predicting the concentration of the released drug. To the best of our knowledge, this is the first ultrasonically powered implantable device platform for targeted drug delivery using electroresponsive polymers. The active area of the implant electronics is just 3 mm × 5 mm.
Collapse
|
23
|
Chang TC, Weber MJ, Wang ML, Charthad J, Khuri-Yakub BPT, Arbabian A. Design of Tunable Ultrasonic Receivers for Efficient Powering of Implantable Medical Devices With Reconfigurable Power Loads. IEEE Trans Ultrason Ferroelectr Freq Control 2016; 63:1554-1562. [PMID: 27623580 DOI: 10.1109/tuffc.2016.2606655] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/10/2023]
Abstract
Miniaturized ultrasonic receivers are designed for efficient powering of implantable medical devices with reconfigurable power loads. Design parameters that affect the efficiency of these receivers under highly variable load conditions, including piezoelectric material, geometry, and operation frequency, are investigated. Measurements were performed to characterize electrical impedance and acoustic-to-electrical efficiency of ultrasonic receivers for off-resonance operation. Finally, we propose, analyze, and demonstrate adaptive matching and frequency tuning techniques using two different reconfigurable matching networks for typical implant loads from 10 [Formula: see text] to 1 mW. Both simulations and measurements show a significant increase in total implant efficiency (up to 50 percentage points) over this load power range when operating off-resonance with the proposed matching networks.
Collapse
|
24
|
Dolatsha N, Arbabian A. Extracting dielectric spectroscopic properties from microwave-induced thermoacoustic signals. Annu Int Conf IEEE Eng Med Biol Soc 2016; 2016:3618-3621. [PMID: 28269078 DOI: 10.1109/embc.2016.7591511] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/06/2023]
Abstract
Available data on the dielectric properties of biological tissue across a frequency range adds an extra degree of freedom of contrast besides the baseline structural information obtained by conventional imaging techniques. In this paper, we propose a new methodology to non-invasively extract the normalized effective conductivity of samples over a large frequency range using microwave-induced thermoacoustic (TA) signals. Additionally, a calibration approach has been adopted to remove the frequency dependency of the experimental setup errors as well as the RF power variation. The linear relationship between the TA signal amplitude on the absorbed microwave power is used to extract the properties of samples. Saline phantoms with various concentration are used to mimic different tissue materials in the proof-of-concept experiment. The extracted normalized effective conductivity by the proposed method matches the theoretical calculations as well as the direct contact measurements by a dielectric probe.
Collapse
|
25
|
Nan H, Chou TC, Arbabian A. Segmentation and artifact removal in microwave-induced thermoacoustic imaging. Annu Int Conf IEEE Eng Med Biol Soc 2015; 2014:4747-50. [PMID: 25571053 DOI: 10.1109/embc.2014.6944685] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/05/2022]
Abstract
Microwave-induced thermoacoustic (TA) imaging combines the soft-tissue dielectric contrast of microwave excitation with the resolution of ultrasound for the goal of a safe, high resolution, and possibly portable imaging technique. However, the hybrid nature of this method introduces new image-reconstruction challenges in enabling sufficient accuracy and segmentation. In this paper, we propose a segmentation technique based on the polarity characteristic of TA signals. A wavelet analysis based method is proposed to identify reflection artifacts as well. The time-frequency feature of the signal is used to assist differentiating artifacts. Ex vivo verification with experimental data is also provided.
Collapse
|
26
|
Haghi BA, Arbabian A. Interferogram-based breast tumor classification using microwave-induced thermoacoustic imaging. Annu Int Conf IEEE Eng Med Biol Soc 2015; 2015:2717-2720. [PMID: 26736853 DOI: 10.1109/embc.2015.7318953] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Microwave-induced thermoacoustic (TA) imaging combines the dielectric/conductivity contrast in the microwave range with the high resolution of ultrasound imaging. Lack of ionizing radiation exposure in TA imaging makes this technique suitable for frequent screening applications, as with breast cancer screening. In this paper we demonstrate breast tumor classification based on TA imaging. The sensitivity of the signal-based classification algorithm to errors in the estimation of tumor locations is investigated. To reduce this sensitivity, we propose to use the interferogram of received pressure waves as the feature basis used for classification, and demonstrate the robustness based on a finite-difference time-domain (FDTD) simulation framework.
Collapse
|
27
|
Arbabian A, Niknejad AM. Time-domain ultra-wideband synthetic imager (TUSI) in silicon. Annu Int Conf IEEE Eng Med Biol Soc 2011; 2011:505-511. [PMID: 22254359 DOI: 10.1109/iembs.2011.6090091] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/31/2023]
Abstract
This paper introduces a silicon-based imaging array for remote measurements of complex permittivity of tissue. Using a coherent pulsed measurement approach, this time-frequency resolved technique recovers the three dimensional mapping of electrical properties of the subject in the microwave/millimeter-wave frequency spectrum. Some of the major challenges in the design of the system are described. Initial measurement results from the prototype high-resolution transmitter fabricated in a 0.13 μm SiGe process are described. The transmitter achieves pulse widths suitable for millimeter-level accuracy imaging.
Collapse
Affiliation(s)
- Amin Arbabian
- Berkeley Wireless Research Center, EECS Dept, UC Berkeley Berkeley, CA, USA
| | | |
Collapse
|