Alfvén pulse driven spicule-like jets in the presence of thermal conduction and ion-neutral collision in two-fluid regime

We present the formation of quasi-periodic cool spicule-like jets in the solar atmosphere using 2.5-D numerical simulation in two-fluid regime (ions+neutrals) under the presence of thermal conduction and ion-neutral collision. The nonlinear, impulsive Alfvénic perturbations at the top of the photosphere trigger field aligned magnetoacoustic perturbations due to ponderomotive force. The transport of energy from Alfvén pulse to such vertical velocity perturbations due to ponderomotive force is considered as an initial trigger mechanism. Thereafter, these velocity perturbations steepen into the shocks followed by quasi-periodic rise and fall of the cool jets transporting mass in the overlying corona. This article is part of the theme issue 'Partially ionized plasma of the solar atmosphere: recent advances and future pathways'.

Proteomic-miRNA Biomics Profile Reveals 2D Cultures of Human iPSC-Derived Neural Progenitor Cells More Sensitive than 3D Spheroid System Against the Experimental Exposure to Arsenic

The iPSC-derived 3D models are considered to be a connective link between 2D culture and in vivo studies. However, the sensitivity of such 3D models is yet to be established. We assessed the sensitivity of the hiPSC-derived 3D spheroids against 2D cultures of neural progenitor cells. The sub-toxic dose of Sodium Arsenite (SA) was used to investigate the alterations in miRNA-proteins in both systems. Though SA exposure induced significant alterations in the proteins in both 2D and 3D systems, these proteins were uncommon except for 20 proteins. The number and magnitude of altered proteins were higher in the 2D system compared to 3D. The association of dysregulated miRNAs with the target proteins showed their involvement primarily in mitochondrial bioenergetics, oxidative and ER stress, transcription and translation mechanism, cytostructure, etc., in both culture systems. Further, the impact of dysregulated miRNAs and associated proteins on these functions and ultrastructural changes was compared in both culture systems. The ultrastructural studies revealed a similar pattern of mitochondrial damage, while the cellular bioenergetics studies confirm a significantly higher energy failure in the 2D system than to 3D. Such a higher magnitude of changes could be correlated with a higher amount of internalization of SA in 2D cultures than in 3D spheroids. Our findings demonstrate that a 2D culture system seems better responsive than a 3D spheroid system against SA exposure.

Prophylactic Para-Aortic Extended Field Irradiation with Concurrent Chemotherapy for FIGO Stage IIIC1 Cervical Cancer Using Intensity Modulated Radiotherapy Technique: Acute Toxicity and Dosimetric Assessment

PURPOSE/OBJECTIVE(S)

To evaluate the efficacy of P - PART with concurrent chemotherapy in LACC with the use of intensity modulated radiotherapy technique (IMRT). Our Primary endpoint was to assess acute toxicities and secondary endpoint was to assess loco-regional control (LRC), disease free-survival (DFS), para-aortic recurrence free survival (PA-RFS).

MATERIALS/METHODS

A total of 30 patients of squamous cell carcinoma of cervix with stage IIIC1 (FIGO-2018) were recruited in this prospective, single arm interventional phase II study between January 2021 to September 2022. 18FDG-PET CT was performed and those with positive PALN were excluded. IMRT was used to deliver a dose of 50 Gy in 25 fractions to whole pelvis and PALN chain below renal hilum till aortic bifurcation received 45 Gy in 25 fractions. Concurrent cisplatin was administered weekly at 40 mg/m2 during radiation. On completion of external beam radiotherapy, high dose rate intracavitary brachytherapy was given at 7 Gy per fraction in 3 fractions prescribed to HR-CTV. Acute toxicities were assessed using CTCAE version 5.0.

RESULTS

Median age was 50 years (37-66 years). All patients had completed treatment as per protocol. All patients had positive pelvic nodes with the maximum nodal short axis dimension of 14 mm (10-18 mm). All patients had positive internal iliac group of LNs, only 2(6.6%) patients had positive common iliac group of Ln. Median number of concurrent cisplatin cycles given were 5 (3-5 cycle). Median overall treatment time was 56 days (52-63 days) and median follow up was 15 months (3-22 month). Median cumulative dose to HR-CTV was 84.3Gy (Range:79.2-86.9Gy). Cumulative median EQD2 to 2cc of bladder and rectum were 69.11Gy (Range:59.17 - 80.07 Gy) and 64.6 Gy (Range: 60.1-66.3Gy) respectively. 7(23.3%) patients having grade 3 diarrhea and 2(6.67%) patients had grade 3 anemia while no significant genitourinary or other toxicities were noted. Patient characteristics, dosimetric data are described in Table-1. All patients underwent clinical and radiological assessment at the time of last follow up with one (3.33%) patient experiencing local failure at 9 months of follow up, hence crude LRC rate is 96.6%, DFS is 13.5 months (5-22 months) and PA-RFS is 16 months (8-23 months) till last date of follow up.

CONCLUSION

Prophylactic EFRT with concurrent chemotherapy using IMRT technique yielded excellent short term clinical outcomes with acceptable toxicity profiles. Longer follow up will elucidate late toxicity and long-term clinical outcomes.

Prospective Evaluation of Locoregional Control in Oral Cavity Squamous Cell Carcinoma with Infratemporal Fossa Involvement Treated with Surgery and Adjuvant Concurrent Chemoradiotherapy

PURPOSE/OBJECTIVE(S)

Oral cavity squamous cell carcinoma (OCSCC) is the most common head and neck cancer in India. Definitive surgery with or without post-op radiotherapy (PORT) with or without chemotherapy (CT) provides better outcomes in locally advanced OCSCC as compared to definitive chemoradiotherapy. T4b OCSCC with infra temporal fossa (ITF) involvement has varied outcome depending on the extent of ITF involvement, with low and mid ITF having relatively favorable prognosis. We aimed to prospectively evaluate outcomes in patients of OCSCC with low or mid ITF involvement treated with curative surgery followed by adjuvant concurrent chemoradiotherapy (CCRT).

MATERIALS/METHODS

A total of 20 patients of T4b OCSCC (as per AJCC 8th edition) with low or mid ITF involvement were included in this single arm prospective interventional study from January 2021 to October 2022. Patients with involvement of skull base, carotid artery, prevertebral fascia and/or pterygomaxillary fissure were excluded. All patients were treated with definitive surgery with ITF clearance followed by adjuvant CCRT as indicated. Loco-regional control (LRC), Disease free survival (DFS), Overall survival (OS) were assessed using Kaplan-Meier survival analysis. Acute toxicities were assessed according to the CTCAE v5.0.

RESULTS

Patient characteristics are summarized in table 1. Median follow-up was 11.5 months (4-21months). All patients received adjuvant CCRT with weekly cisplatin 40mg/m2 to a median number of 6 cycles (5-7 cycles). Median RT dose was 64Gy (60-64Gy). All patients tolerated treatment well. Grade 3 oral mucositis, odynophagia were seen in 8 (40%) patients each and skin toxicity, oral pain in 6 (30%) and 5 (25%) patients respectively. No grade 4 toxicities were observed LRC at three month was 73.68% with 4 local and 1 locoregional failure only. LRC at one year was 36.8% with 8 local, 1 locoregional, 2 locodistant and 1 distant failure only. Median DFS was 10.4 months. Median OS was not reached; four patients died. LRC at three months was better for patients with low ITF disease as compared to mid ITF disease (85.7% vs. 40% (p = 0.04) and at one year was 42.8% vs. 40% (p = 0.50).

CONCLUSION

Selected patient of locally advanced OCSCC with low ITF involvement may benefit from trimodality therapy of surgery with ITF clearance followed by adjuvant CCRT. Acute toxicity profile was acceptable in our study.

Proteome architecture of human-induced pluripotent stem cell-derived three-dimensional organoids as a tool for early diagnosis of neuronal disorders

BACKGROUND AND OBJECTIVES

Induced pluripotent stem cells (iPSCs) derived three-dimensional (3D) model for rare neurodegenerative disorders such as amyotrophic lateral sclerosis (ALS) is emerging as a novel alternative to human diseased tissue to explore the disease etiology and potential drug discovery. In the interest of the same, we have generated a TDP-43-mutated human iPSCs (hiPSCs) derived 3D organoid model of ALS disease. The high-resolution mass spectrometry (MS)-based proteomic approach is used to explore the differential mechanism under disease conditions and the suitability of a 3D model to study the disease.

MATERIALS AND METHODS

The hiPSCs cell line was procured from a commercial source, grown, and characterized following standard protocols. The mutation in hiPSCs was accomplished using CRISPR/Cas-9 technology and predesigned gRNA. The two groups of organoids were produced by normal and mutated hiPSCs and subjected to the whole proteomic profiling by high-resolution MS in two biological replicates with three technical replicas of each.

RESULTS

The proteomic analysis of normal and mutated organoids revealed the proteins associated with pathways of neurodegenerative disorders, proteasomes, autophagy, and hypoxia-inducible factor-1 signaling. Differential proteomic analysis revealed that the mutation in TDP-43 gene caused proteomic deregulation, which impaired protein quality mechanisms. Furthermore, this impairment may contribute to the generation of stress conditions that may ultimately lead to the development of ALS pathology.

CONCLUSION

The developed 3D model represents the majority of candidate proteins and associated biological mechanisms altered in ALS disease. The study also offers novel protein targets that may uncloud the precise disease pathological mechanism and be considered for future diagnostic and therapeutic purposes for various neurodegenerative disorders.

Preparation of nanolignin rich fraction from bamboo stem via green technology: assessment of its antioxidant, antibacterial and UV blocking properties

This work reports the preparation of nano lignin-rich fraction material via green technology from the holistic use of lignocellulosic biomass bamboo. The bamboo is first chemically treated, followed by acid precipitation to extract bamboo-derived macro lignin-rich fraction material. The nano lignin-rich fraction material was then prepared via ultrasonication technique from the extracted bamboo-derived macro lignin-rich fraction material. The confirmation of the distinct lignin functional groups in the extracted lignin-rich fractions has been done by FTIR. Surface morphology by FESEM and TEM revealed spherical nano-lignin-rich fraction materials from extracted bamboo-derived macro lignin-rich fraction materials. DPPH assays indicated that both the obtained fractions depict beneficial antioxidant characteristics. They were found to be effective in terms of their antibacterial activity against both gram-positive bacteria Staphylococcus aureus (S.aureus) and gram-negative bacteria Escherichia coli (E.coli), using the disc diffusion method. These fractions have UV blocking property, and nano-lignin-rich fraction material acts as a more potential UV blocking agent than others. Thus, the nano-lignin-rich fraction material has great potential as a high antioxidant, antibacterial, and UV blocking agent useful in biomedical applications.Highlights Extraction of macro-lignin rich fraction material using chemical treatment of lignocellulosic biomass bamboo via refluxing followed by acid precipitation.Preparation of nano-lignin rich fraction material from extracted bamboo-derived macro-lignin rich fraction material via ultrasonication technique as a green technology.Structural and surface morphology of the extracted macro-lignin & nano lignin-rich fraction materials have been analyzed by XRD, FTIR, EDX, SEM and TEM.The macro lignin & nano lignin-rich fraction materials showed good antioxidant, antibacterial activity and UV-blocking properties, but the nano-lignin rich fraction material exhibited more efficient properties.

Climatology and model prediction of aerosol optical properties over the Indo-Gangetic Basin in north India

The current research focuses on the use of different simulation techniques in the future prediction of the crucial aerosol optical properties over the highly polluted Indo-Gangetic Basin in the northern part of India. The time series model was used to make an accurate forecast of aerosol optical depth (AOD) and angstrom exponent (AE), and the statistical variability of both cases was compared in order to evaluate the effectiveness of the model (training and validation). For this, different models were used to simulate the monthly average AOD and AE over Jaipur, Kanpur and Ballia during the period from 2003 to 2018. Further, the study was aimed to construct a comparative model that will be used for time series statistical analysis of MODIS-derived AOD₅₅₀ and AE_412-470. This will provide a more comprehensive information about the levels of AOD and AE that will exist in the future. To test the validity and applicability of the developed models, root-mean-square error (RMSE), mean absolute error (MAE), mean absolute percent error (MAPE), fractional bias (FB), and Pearson coefficient (r) were used to show adequate accuracy in model performance. From the observation, the monthly mean values of AOD and AE were found to be nearly similar at Kanpur and Ballia (0.62 and 1.26) and different at Jaipur (0.25 and 1.14). Jaipur indicates that during the pre-monsoon season, the AOD mean value was found to be highest (0.32 ± 0.15), while Kanpur and Ballia display higher AOD mean values during the winter season (0.72 ± 0.26 and 0.83 ± 0.32, respectively). Among the different methods, the autoregressive integrated moving average (ARIMA) model was found to be the best-suited model for AOD prediction at Ballia based on fitted error (RMSE (0.22), MAE (0.15), MAPE (24.55), FB (0.05)) and Pearson coefficient r (0.83). However, for AE, best prediction was found at Kanpur based on RMSE (0.24), MAE (0.21), MAPE (22.54), FB (-0.09) and Pearson coefficient r (0.82).

Search for Subsolar-Mass Binaries in the First Half of Advanced LIGO's and Advanced Virgo's Third Observing Run

We report on a search for compact binary coalescences where at least one binary component has a mass between 0.2  M_{⊙} and 1.0  M_{⊙} in Advanced LIGO and Advanced Virgo data collected between 1 April 2019 1500 UTC and 1 October 2019 1500 UTC. We extend our previous analyses in two main ways: we include data from the Virgo detector and we allow for more unequal mass systems, with mass ratio q≥0.1. We do not report any gravitational-wave candidates. The most significant trigger has a false alarm rate of 0.14  yr^{-1}. This implies an upper limit on the merger rate of subsolar binaries in the range [220-24200]  Gpc^{-3} yr^{-1}, depending on the chirp mass of the binary. We use this upper limit to derive astrophysical constraints on two phenomenological models that could produce subsolar-mass compact objects. One is an isotropic distribution of equal-mass primordial black holes. Using this model, we find that the fraction of dark matter in primordial black holes in the mass range 0.2  M_{⊙}<m_{PBH}<1.0  M_{⊙} is f_{PBH}≡Ω_{PBH}/Ω_{DM}≲6%. This improves existing constraints on primordial black hole abundance by a factor of ∼3. The other is a dissipative dark matter model, in which fermionic dark matter can collapse and form black holes. The upper limit on the fraction of dark matter black holes depends on the minimum mass of the black holes that can be formed: the most constraining result is obtained at M_{min}=1  M_{⊙}, where f_{DBH}≡Ω_{DBH}/Ω_{DM}≲0.003%. These are the first constraints placed on dissipative dark models by subsolar-mass analyses.

Facile synthesized zinc oxide nanorod film humidity sensor based on variation in optical transmissivity

Variation in the transmitted light intensity from metal oxide thin films with moisture content provides a great opportunity to use them for humidity sensing. Herein, we have developed a novel and simple humidity sensor based on ZnO nanorod (ZNR) thin films which work as transmission-based sensing elements in an in-house fabricated sensing setup. The ZNR sensing element shows excellent linear sensing performance in the relative humidity (RH) range 10-90% and does not show any hysteresis. A maximum change in optical power of ∼95 μW is observed with the change in RH in the range 10-90%, for the sample with the smallest crystallite size (ZNR1) and highest pore diameter of the ZNR film. Also, a maximum sensitivity of 1.104 μW/% RH is observed for the ZNR1 sample which drops to 0.604 μW/% RH for the highest crystallite size sample (ZNR4). The presence of oxygen vacancies and the micro-porous nature of the film allow the absorption of water vapour on the film which deflects light at different angles that vary with the moisture content. The experimental results suggest that the ZNR film with a smaller crystallite size and larger pore diameter is more sensitive for humidity measurements. Further, an improved sensing performance is perceived in ZNRs because of the larger surface area of the nanorods. The ZNR based sensing elements do not suffer from ageing effects and exhibit high repeatability (88.74%). Further, the humidity sensor has a response time of 62 seconds and recovery time of 100 seconds which can be considered as a fairly quick response.

Luliconazole Nail Lacquer for the Treatment of Onychomycosis: Formulation, Characterization and In Vitro and Ex Vivo Evaluation

Onychomycosis is the most common fungal infection of the nail affecting the skin under the fingertips and the toes. Currently, available therapy for onychomycosis includes oral and topical therapies, either alone or in combination. Oral antifungal medication has been associated with poor drug bioavailability and potential gastrointestinal and systemic side effects. The objective of this study was to prepare and evaluate the luliconazole nail lacquer (LCZ-NL) for the effective treatment of onychomycosis. In the current work, LCZ-NL was formulated in combination with penetration enhancers to overcome poor penetration. A 3² full factorial formulation design of experiment (DOE) was applied for optimization of batches with consideration of dependent (drying time, viscosity, and rate of drug diffusion) and independent (solvent ratio and film former ratio) variables. The optimized formulation was selected based on drying time, viscosity, and rate of drug diffusion. The optimized formulation was further evaluated for % non-volatile content assay, smoothness of flow, water resistance, drug content, scanning electron microscope (SEM), atomic force microscope (AFM), X-ray diffraction (XRD), differential scanning calorimetry (DSC), in vitro drug release, ex vivo transungual permeation, antifungal efficacy, and stability study. The optimized LCZ-NL contained 70:30 solvent ratio and 1:1 film former ratio and was found to have ~ 1.79-fold higher rate of drug diffusion in comparison with LULY™. DSC and XRD studies confirmed that luliconazole retains its crystalline property in the prepared formulation. Antifungal study against Trichophyton spp. showed that LCZ-NL has comparatively higher growth inhibition than LULY™. Hence, developed LCZ-NL can be a promising topical drug delivery system for treating onychomycosis.

Unusual High Hardness and Load-Dependent Mechanical Characteristics of Hydrogenated Carbon-Nitrogen Hybrid Films

Mechanical components are exposed to a rigorous environment in a number of applications including engineering, aerospace, and automobiles. Thus, their service lifetime and reliability are always on the verge of risk. Protective coatings with high hardness are required to enhance their service lifetime and minimize the replacement cost and waste burden. Hydrogenated amorphous carbon including nitrogen-incorporated films, that are commonly deposited by plasma-enhanced chemical vapor deposition, are widely used for commercial protective coating applications. However, their mechanical hardness still falls into the moderate hard regime. This needs to be substantially enhanced for advanced applications. Here, we report the synthesis of very hard nanostructured hydrogenated carbon-nitrogen hybrid (n-C:H:N) films. The optimized n-C:H:N film displays a hardness of about 36 GPa, elastic modulus of 360 GPa, and reasonably good elastic recovery (ER) of 62.7%. The mechanical properties of n-C:H:N films are further tailored when nitrogen pressure is tuned during the growth. The realized remarkably improved mechanical properties are correlated with the films' structural properties and experimental growth conditions. We also conducted density functional theory calculations that show the trend for the elastic modulus of the amorphous carbon films with varying nitrogen concentrations matches well with experimentally measured values. Finally, we probed load-dependent mechanical properties of n-C:H:N films and found an anomalous behavior; some of the mechanical parameters, for instance, ER, reveal an irregular trend with indentation load, which we explain in the framework of the film-substrate composite concept. Overall, this work uncovers many unknown and exciting mechanical phenomena that could pave the way for new technological developments.

Clinical Utility of Intravascular Ultrasound (IVUS) in Carotid Artery Interventions: A Systematic Review and Meta-analysis

BACKGROUND

Carotid plaque morphology plays an important role in determining outcome of carotid artery stenting (CAS). Intravascular ultrasound (IVUS) and its extension VH (Virtual Histology)-IVUS evaluate plaque characteristics in real time and guide decision making during stenting. To date, there is no consensus about indications of IVUS and its validated methods. This systematic review and meta-analysis aims to evaluate the clinical utility of IVUS in carotid artery interventions (CAS) and develop a future consensus for research and practice parameters.

METHODS

A systematic review and meta-analysis was performed of the English literature articles published till February 2021. Studies reporting on IVUS parameters and findings and also its performance compared with other imaging modalities were included in review. Pooled prevalence with 95% confidence intervals (CI) was calculated. The statistical analysis was conducted in R version 3.6.2.

RESULTS

A total of 2015 patients from 29 studies were included. Proportional meta-analysis was performed on 1566 patients from 11 studies. In 9 studies, stroke/transient ischemic attack (TIA) had a pooled prevalence of 4% (95% CI 3%-5%) while asymptomatic stroke had a pooled prevalence of 46% (95% CI 31%-62%) in 4 studies following IVUS. Two studies reported that IVUS detected more plaque protrusion compared with angiography (n=33/396 vs 11/396). IVUS led to stent type or size change in 8 of 48 cases which were missed on angiography in 3 other studies. Concordance between VH-IVUS and true histology was good at 80% to 85% reported in 2 studies.

CONCLUSIONS

This systematic review and meta-analysis showed, though IVUS fared better to computed tomography (CT)/magnetic resonance (MR) angiography for better stent selection during CAS, with low to moderate risk of bias in the studies included. However, large scale, preferably randomized controlled studies are needed to predict its role in determining clinical outcome.

Angstrom-Scale Transparent Overcoats: Interfacial Nitrogen-Driven Atomic Intermingling Promotes Lubricity and Surface Protection of Ultrathin Carbon

Lubricity, a phenomenon which enables the ease of motion of objects, and wear resistance, which minimizes material damage or degradation, are important fundamental characteristics for sustainable technology developments. Ultrathin coatings that promote lubricity and wear resistance are of huge importance for a number of applications, including magnetic storage and micro-/nanoelectromechanical systems. Conventional ultrathin coatings have, however, reached their limit. Graphene-based materials that have shown promise to reduce friction and wear have many intrinsic limitations such as high temperature and substrate-specific growth. To address these concerns, a great deal of research is currently ongoing to optimize graphene-based materials. Here we discover that angstrom-thick carbon (8 Å) significantly reduces interfacial friction and wear. This lubricant shows ultrahigh optical transparency and can be directly deposited on a wide range of surfaces at room temperature. Experiments combined with molecular dynamics simulations reveal that the lubricating efficacy of 8 Å carbon is further improved via interfacial nitrogen.

Association between plant nutrients, the development of Huanglongbing and abnormal growth symptoms in navel orange

Huanglongbing (HLB) causes extensive damage in citrus orchards worldwide. Symptoms include blotchy mottle leaf (BML) and little leaf chlorosis (LLC), and nutrient deficiency usually occurs concurrently. However, the relationship between plant mineral content and infection with Candidatus Liberibacter asiaticus (CLas) is not clearly established. We sampled 7-month-old autumn shoots with three characteristic phenotypes, asymptomatic leaf (AL), BML and LLC, representing HLB disease progression, and further divided samples into CLas-infected and uninfected based on PCR analysis. HLB infection decreased transfer coefficients of Mg and K from leaf to phloem tissues through regulation of the transporter genes Cs3g03790.1 and PtrMGT5, increasing the content of leaf Mg and K. HLB infection also decreased leaf Zn, xylem Ca and phloem Ca and Zn content. Leaf Ca, Mg, Zn and B content decreased while leaf K content increased significantly as symptoms progressed from AL to LLC. The transport of P from leaf to phloem tissue, as evaluated by the transfer coefficient, was regulated by the transporter CsiPT2, resulting in irregular levels of leaf P. Our results provide insights into the nutrient dynamics in Citrus in response to CLas infection and the progression of HLB symptoms.

Tanycytic ependymoma: highlighting challenges in radio-pathological diagnosis

Background

Tanycytic ependymoma (TE) (WHO grade II) is a rare and morphologically distinct variant of ependymoma with only 77 cases reported worldwide so far. Variable clinical and radio-pathological features lead to misdiagnosis as WHO grade 1 tumors. On imaging, differentials of either schwannoma, meningioma, low-grade glial (like angiocentric glioma), or myxopapillary ependymoma are considered. In this study, we aim to discuss clinical, radiological, and pathological features of TE from our archives.

Method

We report clinicopathological aspects of six cases of TE from archives of tertiary care center between 2016 and 2018. Detailed histological assessment in terms of adequate tissue sampling and immunohistochemistry was done for each case.

Result

The patient's age ranged between 10 and 53 years with a slight male predilection. Intraspinal location was seen in two cases (intramedullary and extramedullary), three cases were cervicomedullary (intramedullary), and one was intracranial. One case was associated with neurofibromatosis type 2. Four cases mimicked as either schwannoma or low-grade glial tumor on squash smears. On imaging, ependymoma as differential was kept in only two cases and misclassified remaining either as low-grade glial or schwannoma.

Discussion

In initial published reports, the spine is the most common site (50.4%) followed by intracranial (36.4%) and cervicomedullary (3.9%). They have also highlighted the challenges in diagnosing them intraoperatively and radiologically. Treatment is similar to conventional ependymoma if diagnosed accurately. A multidisciplinary approach with the integration of neurosurgeon, neuroradiologist, and neuropathologist is required for accurate diagnosis and better treatment of patients.

Contribution of Indian researchers in high impact periodontal journals: a bibliometric analysis of last three years

Bibliometric Analysis researches and analyses the quantitative data derived from scientific publications through the empirical evidence of scientific activity generated by collaborating authors through the final product of their research: the scientific article. In scientific society, the concept of impact factor is probably the most widely used in bibliometric construction. To assess the scientometrics of three high-impact factor periodontal journals and identify the contribution of India in these most productive journals over three years (Jan 2018 - Dec 2020) and to know the most influential topics researched. A retrospective observational study was conducted for the Journal of Clinical Periodontology, Journal of Periodontology, and Journal of Periodontal Research. All issues of 2018, 2019, and 2020 were electronically and hand searched for the following parameters: Number of papers, affiliated organizations, and countries, topics reported, and contribution of Indian authors. The data were organized and analyzed with descriptive statistics using SPSS software (version 21.0). In total 469 articles were published by Journal of Periodontology, followed by 454 articles in Journal of Clinical Periodontology and 287 articles in Journal of Periodontal Research. In all the three journals, China had the maximum contributions, succeeded by USA. India has published maximum number of articles in the Journal of Periodontal Research. When analysed, although less as compared to the western counterparts, an increasing trend in the publications is seen in case of India.

Constraints on Cosmic Strings Using Data from the Third Advanced LIGO-Virgo Observing Run

We search for gravitational-wave signals produced by cosmic strings in the Advanced LIGO and Virgo full O3 dataset. Search results are presented for gravitational waves produced by cosmic string loop features such as cusps, kinks, and, for the first time, kink-kink collisions. A template-based search for short-duration transient signals does not yield a detection. We also use the stochastic gravitational-wave background energy density upper limits derived from the O3 data to constrain the cosmic string tension Gμ as a function of the number of kinks, or the number of cusps, for two cosmic string loop distribution models. Additionally, we develop and test a third model that interpolates between these two models. Our results improve upon the previous LIGO-Virgo constraints on Gμ by 1 to 2 orders of magnitude depending on the model that is tested. In particular, for the one-loop distribution model, we set the most competitive constraints to date: Gμ≲4×10^{-15}. In the case of cosmic strings formed at the end of inflation in the context of grand unified theories, these results challenge simple inflationary models.

Constraints on Cosmic Strings Using Data from the Third Advanced LIGO-Virgo Observing Run

We search for gravitational-wave signals produced by cosmic strings in the Advanced LIGO and Virgo full O3 dataset. Search results are presented for gravitational waves produced by cosmic string loop features such as cusps, kinks, and, for the first time, kink-kink collisions. A template-based search for short-duration transient signals does not yield a detection. We also use the stochastic gravitational-wave background energy density upper limits derived from the O3 data to constrain the cosmic string tension Gμ as a function of the number of kinks, or the number of cusps, for two cosmic string loop distribution models. Additionally, we develop and test a third model that interpolates between these two models. Our results improve upon the previous LIGO-Virgo constraints on Gμ by 1 to 2 orders of magnitude depending on the model that is tested. In particular, for the one-loop distribution model, we set the most competitive constraints to date: Gμ≲4×10^{-15}. In the case of cosmic strings formed at the end of inflation in the context of grand unified theories, these results challenge simple inflationary models.

Synthesis, biological evaluation, and molecular docking study of some new rohitukine analogs as protein tyrosine phosphatase 1B inhibitors

Rohitukine (RH) was extracted from the stem bark of Dysoxylum binectariferum Hook. It was derivatized to different arylsulphanmides by treating with the corresponding aryl sulphonyl chlorides. These derivatives were tested in-vitro on protein tyrosine phosphatase 1B (PTP1B) inhibition. Among these the active compounds K2, K3, K5, and K8 significantly inhibited the PTP1B by 51.3%, 65.6%, 71.9%, and 55.9% respectively at 10 µg/ml, the results were also supported by in-silico docking experiments. The most potent compound K5 was analyzed for antidiabetic and antidyslipidemic activity in vivo. It showed a marked reduction in blood glucose level (random and fasting) and serum insulin level in db/db mice. It improved glucose intolerance as ascertained by the oral glucose tolerance test (OGTT). These NCEs (New Chemical Entities) also lowered cholesterol and triglyceride profiles while improved high-density lipoprotein cholesterol in db/db mice. The K5 was further evaluated for antiadipogenic activity on MDI (Methylisobutylxanthine, dexamethasone, and insulin)-induced adipogenesis. where it significantly inhibited MDI-induced adipogenesis in 3 T3-L1 preadipocytes, at 10 µM and 20 µM concentration. These results were compared with the parent compound RH which inhibited 35% and 45% lipid accumulation while the RH analog K5 inhibited the lipid accumulation by 41% and 51% at 10 and 20 µM concentration, respectively. These results well corroborated with in-silico studies.

Artificial Bee Colony and Deep Neural Network-Based Diagnostic Model for Improving the Prediction Accuracy of Diabetes

A large number of machine learning approaches are implemented in healthcare field for effective diagnosis and prediction of different diseases. The aim of these machine learning approaches is to build automated diagnostic tool for helping the physician as well as monitor the health status of patients. These diagnostic tools are widely adopted in intensive care unit for life expectancy of patients. In this study, an effort is made to design an automated diagnostic model for the diagnosis and prediction of diabetes patients. The proposed diagnostic model is designed using artificial bee colony (ABC) algorithm and deep neural network (DNN) technique, called ABC-DNN-based diagnostic model. The ABC algorithm is applied to determine the relevant features for diabetes prediction and diagnosis while DNN technique is adopted for the prediction and diagnosis of diabetes affected patients. The performance of proposed diagnostic model is tested over Pima Indian Diabetes dataset and evaluated using accuracy, sensitivity, specificity, F-measure, Kappa, and area under curve (AUC) parameters. Further, 10-fold and 50-50% training-testing method are considered to assess the performance of proposed diagnostic model. The experimental results of proposed ABC-DNN model is compared with DNN technique and several existing diabetes studies. It is observed that proposed ABC-DNN model achieves 94.74% accuracy rate using 10-fold method.

ESTIMATION OF ENTRANCE SURFACE AIR KERMA IN DIGITAL RADIOGRAPHIC EXAMINATIONS

PURPOSE

Contribution of radiation doses from medical X-ray examination to collective dose is significant. Unusually, high doses may increase the risk of stochastic effects of radiations. Therefore, radiation dose assessment was performed in 241 digital X-ray examinations in the study and was compared with published dose reference levels (DRLs).

METHODS

Entrance surface air kerma (ESAK) was calculated in chest PA, cervical AP/Lat, abdomen AP, lumbar AP/Lat and pelvis AP digital radiographic examinations (119 male and 122 female) following the International Atomic Energy Agency recommended protocol. Initially, 270 digital examinations were selected, reject analysis was performed and final 241 examinations were enrolled in the study for dose calculations. The exposure parameters and X-ray tube output were used for dose calculations. Effective doses were estimated with the help of conversion coefficients from ICRP 103.

RESULTS

Median ESAK (mGy) and associated effective doses obtained were cervical spine AP (1.30 mGy, 0.045 mSv), cervical spine Lat (0.25 mGy, 0.005 mSv), chest PA (0.11 mGy, 0.014 mSv), abdomen AP (0.90 mGy, 0.118 mSv), lumbar spine AP (1.52 mGy, 0.177 mSv), lumbar spine Lat (7.76 mGy, 0.209 mSv) and pelvis AP (0.82 mGy, 0.081 mSv). Results were compared with the studies of UK, Oman, India and Canada.

CONCLUSION

The calculated ESAK and effective dose values were less than or close to previously published literature except for cervical spine AP and lumbar spine Lat. The results reinforce the need for radiation protection optimization, improving examination techniques and appropriate use of automatic exposure control in digital radiography. ESAK values reported in this study could further contribute to establishing local DRLs, regional DRLs and national DRLs.

Potential of graphene-based materials to combat COVID-19: properties, perspectives, and prospects

Severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), a new virus in the coronavirus family that causes coronavirus disease (COVID-19), emerges as a big threat to the human race. To date, there is no medicine and vaccine available for COVID-19 treatment. While the development of medicines and vaccines are essentially and urgently required, what is also extremely important is the repurposing of smart materials to design effective systems for combating COVID-19. Graphene and graphene-related materials (GRMs) exhibit extraordinary physicochemical, electrical, optical, antiviral, antimicrobial, and other fascinating properties that warrant them as potential candidates for designing and development of high-performance components and devices required for COVID-19 pandemic and other futuristic calamities. In this article, we discuss the potential of graphene and GRMs for healthcare applications and how they may contribute to fighting against COVID-19.

Indian agriculture, air pollution, and public health in the age of COVID

Emerging evidence supports the intuitive link between chronic health conditions associated with air pollution and the vulnerability of individuals and communities to COVID-19. Poor air quality already imposes a highly significant public health burden in Northwest India, with pollution levels spiking to hazardous levels in November and early December when rice crop residues are burned. The urgency of curtailing the COVID-19 pandemic and mitigating a potential resurgence later in the year provides even more justification for accelerating efforts to dramatically reduce open agricultural burning in India.

GW190521: A Binary Black Hole Merger with a Total Mass of 150 M_{⊙}

On May 21, 2019 at 03:02:29 UTC Advanced LIGO and Advanced Virgo observed a short duration gravitational-wave signal, GW190521, with a three-detector network signal-to-noise ratio of 14.7, and an estimated false-alarm rate of 1 in 4900 yr using a search sensitive to generic transients. If GW190521 is from a quasicircular binary inspiral, then the detected signal is consistent with the merger of two black holes with masses of 85_{-14}^{+21}  M_{⊙} and 66_{-18}^{+17}  M_{⊙} (90% credible intervals). We infer that the primary black hole mass lies within the gap produced by (pulsational) pair-instability supernova processes, with only a 0.32% probability of being below 65  M_{⊙}. We calculate the mass of the remnant to be 142_{-16}^{+28}  M_{⊙}, which can be considered an intermediate mass black hole (IMBH). The luminosity distance of the source is 5.3_{-2.6}^{+2.4}  Gpc, corresponding to a redshift of 0.82_{-0.34}^{+0.28}. The inferred rate of mergers similar to GW190521 is 0.13_{-0.11}^{+0.30}  Gpc^{-3} yr^{-1}.

ESTIMATES OF PATIENT DOSES AND KERMA-AREA PRODUCT MONITORING IN DIGITAL RADIOGRAPHY

The application of the kerma-area product (PKA) meter is increased rapidly in dosimetry. This study presents measurements of PKA in adherence to the International Atomic Energy Agency protocol for 300 adult patients in digital radiographic procedures. Effective doses (ED) were calculated from PKA measurements and conversion coefficients (E-103/PKA) obtained from the International Commission on radiological protection 103. In skull posteroanterior (PA), skull lateral (LAT), cervical spine anteroposterior (AP), cervical spine LAT, chest PA, abdomen AP, lumbar spine AP, pelvis AP and lumbar spine LAT, the third-quartile PKA values were found to be 0.2, 0.28, 0.33, 0.19, 0.26, 0.95, 0.93, 0.96 and 3.15 Gycm2, and estimated mean EDs were 0.005, 0.008, 0.056, 0.021, 0.037, 0.146, 0.165, 0.097 and 0.258 mSv, respectively. The third-quartile PKA values were suggested as local diagnostic reference levels (LDRLs). Results were compared with the diagnostic reference levels (DRLs) of the UK, the European Commission, previously published LDRLs in Greece and China by Metaxas et al. and Zhang and Chu, respectively. The PKA (third-quartile) value for cervical spine AP was 120% higher than UK 2010 DRLs, lumbar spine LAT was 123% higher than LDRLs given by Metaxas et al. and chest PA was 160% higher than UK 2010 DRLs and 225% higher than Metaxas et al. provided LDRLs. The PKA results were lower than the UK, and two studies in Greece by Metaxas et al. except for chest PA, cervical spine AP and lumbar spine LAT showed the need for further optimization. The LDRLs reported in this study may further contribute to establishing future national DRLs.

A Rule-Based Monitoring System for Accurate Prediction of Diabetes

Diabetes is a chronic disease that can affect the life of people due to high sugar level in their blood. The sugar level is increased due to a lack of production of insulin in the human body. Large numbers of people are affected with diabetes and it can increase tremendously due life style behavior. Diabetes can also affect the other human organs, like kidneys, hearts, retinas and lead to the failure of these organs. This article presents a diabetic monitoring system to determine the risk of diabetes based on the personal health record of patients. In this work, several rules are designed based on the clinical as well as non-clinical symptoms. The effectiveness of the diabetes monitoring system is tested on a set of two hundred forty people. The simulation results are also compared with well-known techniques available for diabetes prediction. It is stated that proposed monitoring system obtains 90.41% accuracy rate as compared with other techniques.

Lightweight carbon-red mud hybrid foam toward fire-resistant and efficient shield against electromagnetic interference

Lightweight, porous, high-performance electromagnetic interference (EMI) shielding and fire-resistant materials are highly demanded in aerospace and defense applications. Due to the lightweight, open porosity and high surface area, carbon foam has been considered as one of the most promising candidates for EMI shielding applications. In the present investigation, we demonstrate the development of novel carbon-red mud hybrid foams with excellent EMI shielding effectiveness (SE). The carbon-red mud hybrid foams are prepared using phenolic resin as a carbon source and red mud (industrial waste) as filler. We observed that the inclusion of red mud in carbon-red mud hybrid foams significantly enhances their dielectric, magnetic, EMI shielding and thermal properties. The EMI shielding results show that absorption is the main contributor to the total EMI SE. The maximum total EMI shielding effectiveness is achieved to be 51.4 dB in the frequency range of 8.2–12.4 GHz for carbon-red mud hybrid foam having 20 wt. % of red mud. The CF-RM20 also showed excellent fire resistance and high thermal stability at elevated temperatures.

Comparison of Structural, Electrical and Thermoelectric Properties of Vacuum Evaporated SnTe Films of Varied Thickness

As a key type of promising thermoelectric (TE) material p-type Tin Telluride (SnTe) vacuum evaporated thin films synthesized at room temperature (RT) on a glass substrate, report a significant enhancement in the figure of merit (ZT) value. The thicknesses of the nanostructured thin films were kept about 145 nm and 275 nm. High-resolution X-ray diffraction (HRXRD) outlines the polycrystalline nature in both thin films. Surface morphology of these films is composed of grains of variable sizes as elucidated by scanning electron microscopy (SEM). This observation is further confirmed by atomic force microscopy (AFM) wherein the average roughness, surface skewness, and surface kurtosis parameters are used to analyze the surface morphology. Local microstructural features and crystalline structure have been confirmed from High-resolution transmission electron microscope (HRTEM) and the selected area electron diffraction (SAED) pattern, respectively. Four probes method was used to determine electrical measurements which confirm that the thin films have semi-metallic nature. Thermoelectric measurements carried out on these films resulted that the figure of merit increases as the thickness of the film increases. The maximum ZT value of ˜1.02 is obtained at room temperature for the thin film of thickness 275 nm.

Charge Transport Properties of Hybrid Nanocomposites Based on Colloidal PbSe Quantum Dots in Poly(2-methoxy,5-(2'-ethylhexyloxy)-P-Phenylenevinylene (MEH-PPV) Matrix

The synthesis of PbSe nanoparticles were carried out by colloidal route using lead acetate as starting material with Oleic acid/TOP as capping agents at the optimized growth temperature. The phase and surface analysis of oleic acid/TOP capped PbSe nanocrystallites were studied in detail in this article. Current-voltage characteristics of pristine and lead selenide quantum dots (PbSe QDs) incorporated in poly(2-methoxy,5-(2'-ethylhexyloxy)-p-phenylenevinylene (MEH-PPV) thin films have been studied at different temperatures (306-125 K) in hole only device configuration, i.e., ITO/poly(ethylene-dioxythiophene):polystyrenesulphonate (PEDOT:PSS)/MEH-PPV/Au and ITO/PEDOT:PSS/MEH-PPV:PbSe/Au. It has been found that the presence of PbSe QDs in MEH-PPV results in the modulation of the charge transport mechanism from dual conduction mechanism, i.e., trap and mobility model to only trap model. It signifies that the traps are becoming shallower due to reduction in trap density from 2×10¹⁷ to 1.2×10¹⁷ cm^-3 as well as trap energy reduces from 74 meV to 62 meV on the incorporation of PbSe QDs.

Cortical thickness and gyrification index measuring cognition in Parkinson's disease

OBJECTIVE

Cortical dynamics is driven by cortico-cortical connectivity and it characterizes cortical morphological features. These brain surface features complement volumetric changes and may offer improved understanding of disease pathophysiology. Hence, present study aims to investigate surface features; cortical thickness (CT) and gyrification index (GI) in Parkinson's disease (PD) patients of normal cognition (PD-CN), cognitively impaired patients with PD (PD-CI) in comparison with cognitively normal healthy controls (HC) to better elucidate cognition linked features in PD.

METHOD

Anatomical MRI (3DT1) was carried out in 30 HC (56.53 ± 8.42 years), 30 PD-CN (58.8 ± 6.07 years), and 30 PD-CI (60.3 ± 6.43 years) subjects. Whole brain ROI based parcellation using Desikan-Killiany (DK-40) atlas followed by regional CT and GI differentiation [with 'age' and 'total intracranial volume' (TIV) correction], multiple linear regression (with 'age', 'TIV', and 'education' correction) with clinical variables, ROC analysis, and CT-GI correlation across the groups was used for data analysis.

RESULTS

Widespread cortical thinning with regional GI reduction was evident in PD-CI with respect to other two groups (HC and PD-CN), and with absence of such alterations in PD-CN compared to HC. Frontal, parietal, and temporal CT/GI significantly correlated with cognition and presented classification abilities for cognitive state in PD. Mean regional CT and GI were found negatively correlated across groups with heterogeneous regions.

CONCLUSION

Fronto-parietal and temporal regions suffer cognition associated cortical thinning and GI reduction. CT may serve better discriminator properties and may be more consistent than GI in studying cognition in PD. Heterogeneous surface dynamics across the groups may signify neuro-developmental alterations in PD.

Slippery and Wear-Resistant Surfaces Enabled by Interface Engineered Graphene

Friction and wear remain the primary cause of mechanical energy dissipation and system failure. Recent studies reveal graphene as a powerful solid lubricant to combat friction and wear. Most of these studies have focused on nanoscale tribology and have been limited to a few specific surfaces. Here, we uncover many unknown aspects of graphene's contact-sliding at micro- and macroscopic tribo-scales over a broader range of surfaces. We discover that graphene's performance reduces for surfaces with increasing roughness. To overcome this, we introduce a new type of graphene/silicon nitride (SiN_x, 3 nm) bilayer overcoats that exhibit superior performance compared to native graphene sheets (mono and bilayer), that is, display the lowest microscale friction and wear on a range of tribologically poor flat surfaces. More importantly, two-layer graphene/SiN_x bilayer lubricant (<4 nm in total thickness) shows the highest macroscale wear durability on tape-head (topologically variant surface) that exceeds most previous thicker (∼7-100 nm) overcoats. Detailed nanoscale characterization and atomistic simulations explain the origin of the reduced friction and wear arising from these nanoscale coatings. Overall, this study demonstrates that engineered graphene-based coatings can outperform conventional coatings in a number of technologies.

An Institutional Experience of Fenestrated T-Bar Clip Use in The Management of Intracranial Aneurysms

Surgical management of an intracranial aneurysm is mainly clipping. Various types of clips have been designed for complex, giant, and other aneurysms. Recently, the Yasargil-fenestrated T-bar clip has been introduced for the management of such complicated aneurysms. The literature regarding its efficacy, limitations, and method of application in complicated aneurysms is limited. We used the fenestrated T-bar clip in four patients of intracranial aneurysms - middle cerebral artery cortical branch aneurysm, anterior communicating artery partially thrombosed aneurysm, internal carotid artery paraclinoid simple aneurysm, and giant aneurysm. All aneurysms were successfully clipped with no residue or branch occlusion. The recovery of all patients was satisfactory. The fenestrated T-bar clip effectively reconstructed the parent artery and occluded the aneurysm in all cases. The application of this clip may be advantageous over the clip application in some uniquely challenging cases.

Search for Subsolar Mass Ultracompact Binaries in Advanced LIGO's Second Observing Run

We present a search for subsolar mass ultracompact objects in data obtained during Advanced LIGO's second observing run. In contrast to a previous search of Advanced LIGO data from the first observing run, this search includes the effects of component spin on the gravitational waveform. We identify no viable gravitational-wave candidates consistent with subsolar mass ultracompact binaries with at least one component between 0.2  M_{⊙}-1.0  M_{⊙}. We use the null result to constrain the binary merger rate of (0.2  M_{⊙}, 0.2  M_{⊙}) binaries to be less than 3.7×10^{5}  Gpc^{-3} yr^{-1} and the binary merger rate of (1.0  M_{⊙}, 1.0  M_{⊙}) binaries to be less than 5.2×10^{3}  Gpc^{-3} yr^{-1}. Subsolar mass ultracompact objects are not expected to form via known stellar evolution channels, though it has been suggested that primordial density fluctuations or particle dark matter with cooling mechanisms and/or nuclear interactions could form black holes with subsolar masses. Assuming a particular primordial black hole (PBH) formation model, we constrain a population of merging 0.2  M_{⊙} black holes to account for less than 16% of the dark matter density and a population of merging 1.0  M_{⊙} black holes to account for less than 2% of the dark matter density. We discuss how constraints on the merger rate and dark matter fraction may be extended to arbitrary black hole population models that predict subsolar mass binaries.

Readmission Rates for One Versus Two-Midnight Length of Stay for Primary Total Knee Arthroplasty: Analysis of the Michigan Arthroplasty Registry Collaborative Quality Initiative (MARCQI) Database

BACKGROUND

The length of stay (LOS) in the hospital for total knee arthroplasty (TKA) has been declining over recent decades. The purpose of this study was to determine if patients with an LOS for TKA that includes only 1 midnight have an increased odds of 90-day readmission compared with those with a 2-midnight LOS. We also sought to identify any predictors of 90-day hospital readmission among those readmitted during our period of analysis.

METHODS

A retrospective review of the Michigan Arthroplasty Registry Collaborative Quality Initiative (MARCQI) database was performed to identify patients with a 1-midnight or 2-midnight LOS for TKA during a 5-year period. The primary end point of this study was inpatient readmission within the 90-day postoperative period. A multiple logistic regression model and propensity score matching were used to compare the odds of 90-day readmission between 1-midnight and 2-midnight LOS. The secondary end points of this study were 90-day complications.

RESULTS

There were 96,250 TKA procedures identified in the database, and 46,709 met our inclusion criteria for LOS. No difference in 90-day-readmission odds between patients with a 1-midnight LOS and those with a 2-midnight LOS for primary TKA was identified. Male sex, single marital status, age of ≥80 years, type-I diabetes, previous smoking, narcotic use prior to surgery, and a higher American Society of Anesthesiologists (ASA) scores increased the odds of 90-day readmission. Patients in the age group of ≥50 to <65 years, those with a higher preoperative hemoglobin level, and those with a positive social history of alcohol use were found to have decreased odds of readmission.

CONCLUSIONS

We found no association between the LOS for primary TKA (1 midnight compared with 2 midnights) and the 90-day readmission risk.

LEVEL OF EVIDENCE

Therapeutic Level III. See Instructions for Authors for a complete description of levels of evidence.

Cd2+ + Cr6+ causes toxic effects on chromosomal development of microspore in Carthamus tinctorius

Intra-category hybrids of Carthamus tinctorius were analyzed for the genetic toxicity in detail for effect of Cd²⁺ + Cr⁶⁺ on reproductive biology of Carthamus tinctorius. Five partially tolerant and five non-tolerant accessions of Carthamus tinctorius after screening were crossed to produce intra-category hybrid. These two heavy metals in combination influenced antagonistically first as well as second meiotic divisions inducing various kinds of anomalies and reduced the number of pollen grains per anther and significantly increased pollen sterility. A differential response for the amount of meiotic irregularity was recorded between different treated sets of hybrids in (Cd + Cr) treated sets. This could be due to differential response of the genotypes for the same concentration of (Cd + Cr). These two heavy metals in combination reduced the number of pollen grains per anther and significantly increased pollen sterility.

Mycorrhizas enhance drought tolerance of citrus by altering root fatty acid compositions and their saturation levels

Arbuscular mycorrhizas (AMs) have the ability to enhance drought tolerance of citrus, but the underlying mechanisms have not been clearly elucidated. Considering the strong association of cell membrane fatty acid (FA) unsaturation with plant drought tolerance, the present study hypothesized that AM fungi (AMF) modulated the composition and unsaturation of FAs to enhance drought tolerance of host plants. Drought-sensitive citrus rootstocks, trifoliate orange (Poncirus trifoliata) seedlings, were inoculated with AMF (Funneliformis mosseae) for 3 months and were subsequently exposed to drought stress (DS) for 8 weeks. Mycorrhizal seedlings exhibited better plant growth performance, higher leaf water potential and lower root abscisic acid concentrations under both well-watered (WW) and DS conditions. Arbuscular mycorrhiza fungus inoculation considerably increased root methyl oleate (C18:1), methyl linoleate (C18:2) and methyl linolenate (C18:3N3) concentrations under both WW and DS conditions, and root methyl palmitoleate (C16:1) concentrations under WW, while it decreased root methyl stearate (C18:0) levels under both WW and DS. These changes in the composition of FAs of mycorrhized roots resulted in higher unsaturation index of root FAs, which later aided in reducing the oxidative damage on account of lower concentration of malondialdehyde and superoxide radicals. The changes of these FAs were a result of AMF-up-regulating root FA desaturase 2 (PtFAD2), FA desaturase 6 (PtFAD6) and Δ9 FA desaturase (PtΔ9) genes under WW and PtFAD2, PtFAD6 and Δ15 FA desaturase (PtΔ15) genes under DS conditions. Our results confirmed that mycorrhization brought significant changes in root FA compositions, in addition to regulation of gene expression responsible for increasing the unsaturation level of FAs, a predisposing physiological event for better drought tolerance of citrus.

Tests of General Relativity with GW170817

The recent discovery by Advanced LIGO and Advanced Virgo of a gravitational wave signal from a binary neutron star inspiral has enabled tests of general relativity (GR) with this new type of source. This source, for the first time, permits tests of strong-field dynamics of compact binaries in the presence of matter. In this Letter, we place constraints on the dipole radiation and possible deviations from GR in the post-Newtonian coefficients that govern the inspiral regime. Bounds on modified dispersion of gravitational waves are obtained; in combination with information from the observed electromagnetic counterpart we can also constrain effects due to large extra dimensions. Finally, the polarization content of the gravitational wave signal is studied. The results of all tests performed here show good agreement with GR.

Fast switching ferroelectric liquid crystal Pancharatnam-Berry lens

A ferroelectric liquid crystal (FLC) cell with continuously alignment structure is realized by a polarization hologram method for fabricating a Pancharatnam-Berry (PB) lens, which is employed as a concave/convex lens. The PB phase can be maintained by the optical axis in-plane switching; meanwhile, its diffraction efficiency can be tuned in a certain range by electrically controlling azimuthal angle and optical biaxiality of the smectic helical structure realized by deformed helix ferroelectric liquid crystals. The measured diffraction efficiency of the fabricated device is up to 87% and the response time can be 300μs with a low electric voltage. The FLC PB lens can have potential applications in existing optical devices and the realization of FLC with continuous alignment structure can be further used for other LC-based optical devices.

Constraining the p-Mode-g-Mode Tidal Instability with GW170817

We analyze the impact of a proposed tidal instability coupling p modes and g modes within neutron stars on GW170817. This nonresonant instability transfers energy from the orbit of the binary to internal modes of the stars, accelerating the gravitational-wave driven inspiral. We model the impact of this instability on the phasing of the gravitational wave signal using three parameters per star: an overall amplitude, a saturation frequency, and a spectral index. Incorporating these additional parameters, we compute the Bayes factor (lnB_{!pg}^{pg}) comparing our p-g model to a standard one. We find that the observed signal is consistent with waveform models that neglect p-g effects, with lnB_{!pg}^{pg}=0.03_{-0.58}^{+0.70} (maximum a posteriori and 90% credible region). By injecting simulated signals that do not include p-g effects and recovering them with the p-g model, we show that there is a ≃50% probability of obtaining similar lnB_{!pg}^{pg} even when p-g effects are absent. We find that the p-g amplitude for 1.4  M_{⊙} neutron stars is constrained to less than a few tenths of the theoretical maximum, with maxima a posteriori near one-tenth this maximum and p-g saturation frequency ∼70  Hz. This suggests that there are less than a few hundred excited modes, assuming they all saturate by wave breaking. For comparison, theoretical upper bounds suggest ≲10^{3} modes saturate by wave breaking. Thus, the measured constraints only rule out extreme values of the p-g parameters. They also imply that the instability dissipates ≲10^{51}  erg over the entire inspiral, i.e., less than a few percent of the energy radiated as gravitational waves.

Search for Subsolar-Mass Ultracompact Binaries in Advanced LIGO's First Observing Run

We present the first Advanced LIGO and Advanced Virgo search for ultracompact binary systems with component masses between 0.2  M_{⊙}-1.0  M_{⊙} using data taken between September 12, 2015 and January 19, 2016. We find no viable gravitational wave candidates. Our null result constrains the coalescence rate of monochromatic (delta function) distributions of nonspinning (0.2  M_{⊙}, 0.2  M_{⊙}) ultracompact binaries to be less than 1.0×10^{6}  Gpc^{-3}  yr^{-1} and the coalescence rate of a similar distribution of (1.0  M_{⊙}, 1.0  M_{⊙}) ultracompact binaries to be less than 1.9×10^{4}  Gpc^{-3}  yr^{-1} (at 90% confidence). Neither black holes nor neutron stars are expected to form below ∼1  M_{⊙} through conventional stellar evolution, though it has been proposed that similarly low mass black holes could be formed primordially through density fluctuations in the early Universe and contribute to the dark matter density. The interpretation of our constraints in the primordial black hole dark matter paradigm is highly model dependent; however, under a particular primordial black hole binary formation scenario we constrain monochromatic primordial black hole populations of 0.2  M_{⊙} to be less than 33% of the total dark matter density and monochromatic populations of 1.0  M_{⊙} to be less than 5% of the dark matter density. The latter strengthens the presently placed bounds from microlensing surveys of massive compact halo objects (MACHOs) provided by the MACHO and EROS Collaborations.

Mitochondrial DNA haplogroups and age at onset of Machado-Joseph disease/spinocerebellar ataxia type 3: a study in patients from multiple populations

BACKGROUND AND PURPOSE

Mitochondrial dysfunction has been implicated in the pathogenesis of several neurodegenerative disorders, including Machado-Joseph disease (MJD), an autosomal dominant late-onset polyglutamine ataxia that results from an unstable expansion of a CAG tract in the ATXN3 gene. The size of the CAG tract only partially explains age at onset (AO), highlighting the existence of disease modifiers. Mitochondrial DNA (mtDNA) haplogroups have been associated with clinical presentation in other polyglutamine disorders, constituting potential modifiers of MJD phenotype.

METHODS

A cross-sectional study, using 235 unrelated patients from Portugal, Brazil, India and Japan, was performed to investigate if mtDNA haplogroups contribute to AO of MJD. mtDNA haplogroups were obtained after sequencing the mtDNA hypervariable region I. Patients were classified in 15 phylogenetically related haplogroup clusters.

RESULTS

The AO was significantly different among populations, implying the existence of other non-CAG factors, which seem to be population specific. In the Portuguese population, patients classified as belonging to haplogroup JT presented the earliest onset (estimated onset 34.6 years of age). Haplogroups W and X seem to have a protective effect, causing a delay in onset (estimated onset 47 years of age). No significant association between haplogroup clusters and AO was detected in the other populations or when all patients were pooled. Although haplogroup JT has already been implicated in other neurodegenerative disorders, no previous reports of an association between haplogroups W and X and disease were found.

CONCLUSIONS

These findings suggest that haplogroups JT, W and X modify AO in MJD. Replication studies should be performed in European populations, where the frequency of the candidate modifiers is similar.