Influence of flash heating and aspergillopepsin I supplementation on must and wine attributes of aromatic varieties

The protein instability with haze formation represents one of the main faults occurring in white and rosé wines. Among the various solutions industrially proposed, aspergillopepsin I (AP-I) supplementation coupled with must heating (60-75 °C) has been recently approved by OIV and the European Commission for ensuring protein stability of wines. This study investigates the impact of AP-I either applied independently or in combination with flash pasteurization on the chemical composition of grape must and wines derived from Sauvignon Blanc and Gewürztraminer. The efficacy on protein stability of a complete treatment combining heat (70 °C) and AP-I (HP) was confirmed through heat test and bentonite requirement, although no differences were observed between must heating and HP treatments. However, high-performance liquid chromatography analysis of unstable pathogenesis-related proteins revealed that AP-I supplementation reduced chitinases and thaumatin-like proteins compared to the non-enzymed samples, with and without must heating. Amino acid increase was reported only in HP musts, particularly in Sauvignon Blanc. The concentration of yeast-derived aroma compounds in Gewürztraminer wines was increased by must heating; compared to controls, flash pasteurization rose the overall acetate esters content of 85 % and HP of 43 %, mostly due to isoamyl acetate. However, heat treatments -with or without AP-I- reduced terpenes up to 68 %. Despite the different aroma profiles, no differences were observed for any descriptor for both varieties in wine tasting, and only a slight decrease trend was observed for the floral intensity and the typicality descriptors in heated wines.

Gas chromatography-stable isotope ratio mass spectrometry prior solid phase microextraction and gas chromatography-tandem mass spectrometry: development and optimization of analytical methods to analyse garlic (Allium sativum L.) volatile fraction

Garlic (Allium sativum L.) is not only appreciated for its flavour and taste, but it is also recognized for various health properties. The European Commission, through the attribution of the Protected Designation of Origin (PDO) certification mark, has officially recognized some specific varieties of garlic. To protect not only the commercial value but also the reputation of this appreciated product, effective tools are therefore required. For the first time, a new compound specific isotope analysis method based on carbon stable isotopic ratio measurement of the three major volatile garlic compounds allyl alcohol (AA), diallyl disulphide (DD) and diallyl trisulphide (DT) through head-space solid phase microextraction (HS-SPME) followed by gas chromatography-combustion-isotope ratio mass spectrometry (GC-C-IRMS) was developed. A within-day standard deviation (Srwithin-day) of 0.3 ‰, 0.4 ‰ and 0.2 ‰ for δ(13C) and a between-day standard deviation (Srbetween-day) of 0.8 ‰, 1.0 ‰ and 0.6 ‰ of AA, DT and DD was estimated. For the first time, the ranges of isotopic variability for the three volatile compounds of red garlic from two neighbouring Italian regions (Abruzzo and Lazio) were defined analysing 30 samples. The same dataset was also considered in analysing the percentage composition of the previously mentioned three volatile compounds through HS-SPME followed by gas chromatography-tandem mass spectrometry (GC-MS/MS). The two analytical approaches were combined in this explorative study, aiming to provide potential parameters to discriminate garlic samples based on their geographical origin.

Neurofeedback for alcohol addiction: Changes in resting state network activity✰

Alcohol dependence continues to be a major global burden despite significant research progress and treatment development. The aim of this study was to investigate whether neurofeedback training can alter resting state fMRI activity in brain regions that play a crucial role in addiction disorders in patients with alcohol dependence. For this purpose, a total of 52 patients were recruited for the present study, randomized, and divided into an active and a sham group. Patients in the active group received three sessions of neurofeedback training. We compared the resting state data in the active group as part of the NF training on six measurement days. When comparing the results of the active group from neurofeedback day 3 with baseline 1, a significant reduction in activated voxels in the ventral attention network area was seen. This suggests that reduced activity over the course of therapy in subjects may lead to greater independence from external stimuli. Overall, a global decrease in activated voxels within all three analysed networks compared to baseline was observed in the study. The use of resting-state data as potential biomarkers, as activity changes within these networks, may be to help restore cognitive processes and alcohol abuse-related craving and emotions.

High-Density Balsamic Vinegar: Application of Stable Isotope Ratio Analysis to Determine Watering Down

Balsamic vinegar of Modena (ABM) is a product obtained from concentrated grape must with the addition of wine vinegar. It can be adulterated with the addition of exogenous water. The official method EN16466-3, based on the analysis of the stable isotope ratio δ18O of the water, is not applicable to ABM with high density (above 1.20 at 20 °C). In this work, for the first time, the official method was modified, providing for a prior dilution of the sample and applying a correction of the data in order to eliminate the isotopic contribution of the diluent, whereupon the within- and between-day standard deviations of repeatability (Sr) were estimated. Considering the limit values of δ18O for vinegar and concentrated must, the threshold limit of δ18O, below which the ABM product can be considered adulterated, has been identified.

Myo-Inositol, Scyllo-Inositol, and Other Minor Carbohydrates as Authenticity Markers for the Control of Italian Bulk, Concentrate, and Rectified Grape Must

Myo-inositol polyalcohol is a characteristic component of natural and concentrated grape musts (CMs), and Regulation (EU) no. 1308/2013 prescribes its presence as a marker of the authenticity of rectified concentrated must (RCM). Other polyalcohols besides myo-inositol, such as scyllo-inositol or minor sugars, could be considered authenticity markers, but an extensive search in the literature yielded no exhaustively investigated study of their concentration variability in genuine products. The aim of this study was to create an extensive national data bank of minor carbohydrates profiles and investigate the impact of the geographical origin and the different vintages on the concentration of these compounds; to this end, 450 authentic Italian grape musts of different varieties were sampled and analyzed during the harvest season in 2019, 2020, and 2021. The grape musts from the Italian wine-growing areas CII and CIIIb had myo- and scyllo-inositol contents always higher than 756 and 39 mg/kg of sugar, respectively. Conversely, also considering other mono- and disaccharides, sucrose, sorbitol, lactose, maltose, and isomaltose showed contents always lower than 534, 1207, 390, 2222, and 1639 mg/kg of sugar, respectively. The general applicability to the CM and RCM of the proposed authenticity thresholds, established in the must, was demonstrated by studying the influence of must concentration on the myo- and scyllo-inositol content. Inter-laboratory comparison experiments were also conducted to harmonize and characterize laboratory methods and validate the analytical dataset. Based on the obtained results, the text of the EU legislation (Reg. (EU) 1308/2013), which defines the characteristics of the must and the CRM product, should be revised.

Fatty acids stable carbon isotope fractionation in the bovine organism. A compound-specific isotope analysis through gas chromatography combustion isotope ratio mass spectrometry

The contribution of dietary fatty acids to the quality of the meat and their path through the bovine organism is currently the subject of a lot of research. Stable isotope ratio analysis represents a powerful tool for this aim, one that has not been studied in depth yet. In this work, for the first time, the carbon isotopic ratios of six fatty acids (myristic 14:0, palmitic 16:0, stearic 18:0, oleic 18:1n-9, linoleic 18:2n-6 and linolenic 18:3n-3 acids) in different matrixes (diet, rumen, duodenal content, liver and loin) were analysed through gas chromatography combustion isotope ratio mass spectrometry. Moreover, the quantification of the single fatty acids was carried out, providing important information supporting the carbon isotopic ratio results. The variation in the concentration of the fatty acids in the different matrices depends on the chemical modifications they undergo in the sequential steps of the metabolic path. GC-C-IRMS turned out to be a powerful tool to investigate the fate of dietary fatty acids, providing information about the processes they undergo inside the bovine organism.

Gas Chromatography Combustion Isotope Ratio Mass Spectrometry for Improving the Detection of Authenticity of Grape Must

Since ancient times, grape must and wine have been considered one of the most sophisticated matrices and, in the last few years, the continuous rise in volumes and prices of grapes and wine has encouraged fraud and adulteration in the oenological field. One of the most common adulterations is sugar addition to grape must in the form of cane or beet sugar or syrup coming from vegetable sources, such as cereals or fruits. Since 1990, the International Organisation of Vine and Wine (OIV) has issued specific official isotopic methods to fight against this practice, but they are not always effective. With the aim to develop a new method able to identify sugar addition, we compared the δ¹³C value of sugar extracted from grape must analyzed by elemental analyzer/isotope ratio mass spectrometry (EA-IRMS) to the δ¹³C value of proline analyzed by gas chromatography-combustion isotope ratio mass spectrometry (GC-C-IRMS), after extraction and derivatization. δ¹³C and δ¹⁵N of proline have also been tested as potential geographical markers. In addition, the carbon isotopic composition of two characteristic grape must sugars (myo- and scyllo-inositols) was measured by GC-C-IRMS, after derivatization, to identify the illegal correction of their concentration. On the basis of the obtained results we can conclude that the compound-specific isotope analysis represents a novel analytical tool to support and improve certification and control procedures.

Bulk and compound-specific stable isotope ratio analysis for authenticity testing of organically grown tomatoes

Until now, there has been a lack of analytical methods that can reliably verify the authenticity of organically grown plants and derived organic food products. In this study, stable isotope ratio analysis of hydrogen (H, δ²H), carbon (C, δ¹³C), nitrogen (N, δ¹⁵N), oxygen (O, δ¹⁸O) and sulfur (S, δ³⁴S) was conducted along the tomato passata production process using organic and conventionally grown tomatoes from two Italian regions over two years. A gas chromatography-combustion-isotope ratio mass spectrometry (GC-C-IRMS) based method was developed and applied for analysis of C and N isotope ratios in amino acids derived from tomatoes. Of the bulk isotope ratios, δ¹⁵N was the most significant parameter for discriminating organic from conventional products. The classification power was improved significantly by compound-specific isotope analysis regardless of the production years and regions. We conclude that isotope analysis of amino acids is a novel analytical tool for complementing existing certification and control procedures in the organic tomato sector.

Efficacy of a new delivery system based on solid lipid microparticles for the oral administration of the non-conventional antioxidant IAC on a diabetes mouse model

PURPOSE

We previously showed the positive effects of the new antioxidant molecule bis(1-hydroxy-2,2,6,6-tetramethyl-4-piperidinyl)-decandioate (IAC) in reducing basal hyperglycaemia and relieving glucose intolerance in a diabetes model. However, the chemical properties of IAC did not allow an efficient oral administration, thus representing the main failing of that study. Here, we tested the effect of a new oral delivery system based on solid lipid microparticles (SLMs) in a diabetes mouse model.

METHODS

The diabetes model was induced in C57B1/6J mice using streptozotocin and nicotinamide. Only the animals that overcame the glycaemic threshold of 180 mg/dL were enrolled in the study. Diabetic animals were then randomly assigned to 4 groups (n = 9) and treated once a day for 5 consecutive weeks with IAC (50, 100, and 150 mg/kg b.w.). The control group was composed of (n = 7) healthy mice that received only the vehicle. Glucose level was weekly monitored during the treatment period and up to 3 weeks after the suspension of the treatment. Glucose tolerance and insulin-resistance test were carried out.

RESULTS

Our results showed that SLMs maintained the IAC effect in reducing basal hyperglycaemia as well as improving the insulin sensitivity and glucose tolerance.

CONCLUSION

The present study confirms that SLMs are promising drug carriers, which allow the oral administration of IAC ensuring its therapeutic efficacy. The concrete possibility to administer IAC per os represents a significant breakthrough in the putative consideration of this multi-radical scavenger in the diabetes therapeutic approach.

Development of a fast gas chromatography-tandem mass spectrometry method for volatile aromatic compound analysis in oenological products

Aroma plays an important role in food quality, and knowledge of volatile composition is essential to support technological choices during industrial transformation processes. In this study, an innovative GC-MS/MS method useful for fast analysis of the broad aroma profile of oenological products was developed. Fifty volatile compounds of oenological interest belonging to the main chemical classes (acetates, acids, alcohols, aldehydes, esters, ketones, phenols, terpenes, and thiols) were identified and quantified in a single chromatographic run taking only 15 minutes. The high sensitivity of the mass spectrometer, combined with accurate fast chromatography performed with a suitable capillary column, allowed us to avoid further concentration steps after solid phase extraction. Validation of the method was performed in relation to the limit of detection, limit of quantification, linearity range, repeatability, reproducibility, and recovery. Once validated, the method was successfully tested on commercial oenological samples, demonstrating its applicability to fast routine multiaroma analysis.

Differentiation of wood-derived vanillin from synthetic vanillin in distillates using gas chromatography/combustion/isotope ratio mass spectrometry for δ13 C analysis

RATIONALE

Typical storage in oak barrels releases in distillates different degradation products such as vanillin, which play an important role in flavour and aroma. The addition of vanillin, as well as other aroma compounds, of different origin is prohibited by European laws. As vanillin samples from different sources have different δ¹³ C values, the δ¹³ C value could be used to determine whether the vanillin is authentic (lignin-derived), or if it has been added from another source (e.g. synthetic).

METHODS

The δ¹³ C values for vanillin derived from different sources, including natural, synthetic and tannins, were measured by gas chromatography/combustion/isotope ratio mass spectrometry (GC/C/IRMS), after diethyl ether addition and/or ethanol dilution. A method for analysing vanillin in distillates after dichloromethane extraction was developed. Tests were undertaken to prove the reliability, reproducibility and accuracy of the method with standards and samples. Distillate samples were run to measure the δ¹³ C values of vanillin and to compare them with values for other sources of vanillin.

RESULTS

δ¹³ C values were determined for: natural vanillin extracts (-21.0 to -19.3‰, 16 samples); vanillin ex-lignin (-28.2‰, 1 sample); and synthetic vanillin (-32.6 to -29.3‰, 7 samples). Seventeen tannin samples were found to have δ¹³ C values of -29.5 to -26.7‰, which were significantly different (p < 0.05) from those of the natural and synthetic vanillins. The vanillin δ¹³ C values measured in distillates (-28.9 to -25.7‰) were mainly in the tannin range, although one spirit (-32.5‰) was found to contain synthetic vanillin.

CONCLUSIONS

The results show that synthetic vanillin added to a distillate could be differentiated from vanillin derived from oak barrels by their respective δ¹³ C values. The GC/C/IRMS method could be a useful tool in the determination of adulteration of distillates.

Multi-isotopic signatures of organic and conventional Italian pasta along the production chain

The variability of stable isotope ratios (δ(2) H, δ(13) C, δ(15) N, δ(18) O and δ(34) S) along the production chain of pasta (durum wheat, flour and pasta) produced by using both conventional and organic farming systems in four Italian regions in 2 years was investigated. The aim was to evaluate if and how the farming system and geographical origin affect stable isotope ratios determined along the production chain. Irrespective of the processing technology, 65% of the samples were correctly classified according to the farming system and 98% were correctly classified regarding the geographical region. When considering both farming system and geographical region simultaneously, 80% of the samples were correctly classified. The measured isotope parameters were thus primarily affected by the geographical origin. In conclusion, it is expected that the use of these parameters will allow the development of analytical control procedures that can be used to check the geographical origin of Italian organic and conventional pasta and its raw materials. Copyright © 2016 John Wiley & Sons, Ltd.

δ(15) N from soil to wine in bulk samples and proline

The feasibility of using δ(15) N as an additional isotopic marker able to link wine to its area of origin was investigated. The whole production chain (soil-leaves-grape-wine) was considered. Moreover, the research included evaluation of the effect of the fermentation process, the use of different types of yeast and white and red vinification, the addition of nitrogen adjuvants and ultrasound lysis simulating wine ageing. The δ(15) N of grapes and wine was measured in bulk samples and compounds, specifically in proline, for the first time. Despite isotopic fractionation from soil to wine, the δ(15) N values of leaves, grapes, wine and particularly must and wine proline conserved the variability of δ(15) N in the growing soil. Fermentation and ultrasound treatment did not affect the δ(15) N values of grape must, which was therefore conserved in wine. The addition of inorganic or organic adjuvants was able to influence the δ(15) N of bulk wine, depending on the amount and the difference between the δ(15) N of must and that of the adjuvant. The δ(15) N of wine proline was not influenced by adjuvant addition and is therefore the best marker for tracing the geographical origin of wine. Copyright © 2016 John Wiley & Sons, Ltd.

Compound-Specific δ¹⁵N and δ¹³C Analyses of Amino Acids for Potential Discrimination between Organically and Conventionally Grown Wheat

We present a study deploying compound-specific nitrogen and carbon isotope analysis of amino acids to discriminate between organically and conventionally grown plants. We focused on grain samples of common wheat and durum wheat grown using synthetic nitrogen fertilizers, animal manures, or green manures from nitrogen-fixing legumes. The measurement of amino acid δ(15)N and δ(13)C values, after protein hydrolysis and derivatization, was carried out using gas chromatography-combustion-isotope ratio mass spectrometry (GC-C-IRMS). Our results demonstrated that δ(13)C of glutamic acid and glutamine in particular, but also the combination of δ(15)N and δ(13)C of 10 amino acids, can improve the discrimination between conventional and organic wheat compared to stable isotope bulk tissue analysis. We concluded that compound-specific stable isotope analysis of amino acids represents a novel analytical tool with the potential to support and improve the certification and control procedures in the organic sector.

Botanical traceability of commercial tannins using the mineral profile and stable isotopes

Commercial tannins are natural polyphenolic compounds extracted from different plant tissues such as gall, the wood of different species and fruit. In the food industry they are mainly used as flavourings and food ingredients, whereas in winemaking they are classified as clarification agents for wine protein stabilisation, although colour stabilisation, metal removal, unpleasant thiol removal and rheological correction are also well-known and desired effects. Due to their particular technical properties and very different costs, the possibility of correct identification of the real botanical origin of tannins can be considered a primary target in oenology research and in fulfilling the technical and economic requirements of the wine industry. For some categories of tannins encouraging results have already been achieved by considering sugar or polyphenolic composition. For the first time this work verifies the possibility of determining the botanical origin of tannins on the basis of the mineral element profile and analysis of the (13) C/(12) C isotopic ratio. One hundred two commercial tannins originating from 10 different botanical sources (grapes, oak, gall, chestnut, fruit trees, quebracho, tea, acacia, officinal plants and tara) were analysed to determine 57 elements and the (13) C/(12) C isotopic ratio, using inductively coupled plasma mass spectrometry and isotope-ratio mass spectrometry, respectively. Forward stepwise discriminant analysis provided good discrimination between the 8 most abundant groups, with 100% correct re-classification. The model was then validated five times on subsets of 10% of the overall samples, randomly extracted, achieving satisfactory results. With a similar approach it was also possible to distinguish toasted and untoasted oak tannins as well as tannins from grape skin and grape seeds.

Stable isotope ratio analysis for verifying the authenticity of balsamic and wine vinegar

In this paper, we investigate whether the analysis of stable isotope ratios D/H and ¹³C/¹²C in ethanol and acetic acid and of ¹⁸O/¹⁶O in water can be applied to the ingredients of "aceto balsamico di Modena IGP" (ABM) to evaluate their authenticity. We found that impurities in the extraction solution do not affect the ¹³C/¹²C of acetic acid and the D/H values of acetic acid are not affected under a composite NMR experiment. The standard deviation of repeatability and standard deviation of reproducibility are comparable in wine vinegar and ABM and generally lower than those quoted in the official methods. This means that the validation parameters quoted in the official methods can also be applied to the ingredients of ABM. In addition, we found no changes in the isotopic values from wine to vinegar and to ABM, and from the original must to the ABM must, providing experimental evidence that reference data from wine databanks can also be used to evaluate the authenticity of vinegar and ABM.

Cystic fibrosis in adults: short-term and long-term reproducibility of the Brody score for lung morphology in low-dose MDCT scans

PURPOSE

The semi-quantitative Brody score measures the severity of cystic fibrosis (CF)-related lung disease. We investigated the short-term (28 - 60 days) and long-term (2 - 7 years) intra- and inter-observer reproducibility of the Brody score in low-dose multidetector row computed tomography examinations performed in inspiration (LDCTs) of adult CF patients.

MATERIALS AND METHODS

Composite Brody scores and respective underlying bronchiectasis, mucus plugging, peribronchial thickening, parenchymal opacity, and hyperinflation subscores were evaluated twice (time interval, 1 - 84 months) by each of 3 independent radiologists (1 - 20 years of professional diagnostic radiology experience) in LDCTs (4 - 64 rows, 120 KVp, 10 - 15  mAs/slice, CTDIw approx. 1.0  mGy, effective dose approx. 0.5  mSv) of 15 adult patients with CF-related lung disease (8 female, 7 male, age, 18 - 50 years, mean, 33 years).

RESULTS

The average reproducibility of the Brody score was within +/-7 % (range, 2 - 30 %) between radiologists, and +/-6 % (3 - 12 %) within radiologists (short-term, 28 - 60 days, 4 %, 0 - 12 %, long-term, 2 - 7 years, 12 %, 1 - 36 %). For the different subscores, the reproducibility was within +/-25 % (15 - 41 %) between radiologists and +/-23 % (12 - 46 %) within radiologists.

CONCLUSION

The Brody score shows high average inter-observer reproducibility in LDCTs of adult CF patients. The Brody score also demonstrates high average intra-observer reproducibility if subsequent assessments are made within 28 - 61 days. With time intervals of 2 - 7 years between subsequent evaluations, however, intra-observer reproducibility decreases. Respective subscores each demonstrate lower intra- and inter-observer reproducibility than does the composite Brody score.

Gas chromatography combined with mass spectrometry, flame ionization detection and elemental analyzer/isotope ratio mass spectrometry for characterizing and detecting the authenticity of commercial essential oils of Rosa damascena Mill

RATIONALE

The essential oil of Rosa damascena Mill. is known for its fine perfumery application, use in cosmetic preparations and for several pharmacological activities. Due to its high value, it can be easily adulterated with flavors or cheaper oils. This study is aimed at a detailed phytochemical characterization of commercial samples of R. damascena essential oil and at their authenticity assessment.

METHODS

Nineteen commercial samples of R. damascena essential oil of different geographic origin and an additional authentic one, directly extracted by hydro-distillation from fresh flowers, were considered. GC/MS and GC/FID techniques were applied for the phytochemical analysis of the samples. EA/IRMS (Elemental Analyzer/Isotope Ratio Mass Spectrometry) and GC/C (Combustion)/IRMS were used to determine the δ(13)C composition of bulk samples and of some specific components.

RESULTS

Citronellol (28.7-55.3%), geraniol (13.5-27.3%) and nonadecane (2.6-18.9%) were the main constituents of Bulgarian and Turkish essential oils, while those from Iran were characterized by a high level of aliphatic hydrocarbons (nonadecane: 3.7-23.2%). The δ(13)C values of bulk samples were between -28.1 and -26.9‰, typical for C3 plants. The δ(13)C values of specific components were in the usual range for natural aromatic substances from C3 plants, except for geranyl acetate, which displayed higher values (up to -18‰). These unusual δ(13)C values were explained by the addition of a natural cheaper oil from a C4 plant (Cymbopogon martinii, palmarosa), which was found to occur in most of the essential oils.

CONCLUSION

GC/C/IRMS, in combination with GC/MS and GC/FID, can be considered as an effective and reliable tool for the authenticity control of R. damascena essential oil.