Surface Roughness-Induced Changes in Important Physical Features of CoFeSm Thin Films on Glass Substrates during Annealing

Co60Fe20Sm20 thin films were deposited onto glass substrates in a high vacuum setting. The films varied in thickness from 10 to 50 nm and underwent annealing processes at different temperatures: room temperature (RT), 100, 200, and 300 °C. Our analysis encompassed structural, magnetic, electrical, nanomechanical, adhesive, and optical properties in relation to film thickness and annealing temperature. X-ray diffraction (XRD) analysis did not reveal characteristic peaks in Co60Fe20Sm20 thin films due to insufficient growth-driving forces. Electrical measurements indicated reduced resistivity and sheet resistance with increasing film thickness and higher annealing temperatures, owing to hindered current-carrier transport resulting from the amorphous structure. Atomic force microscope (AFM) analysis showed a decrease in surface roughness with increased thickness and annealing temperature. The low-frequency alternating current magnetic susceptibility (χac) values increased with film thickness and annealing temperature. Nanoindentation analysis demonstrated reduced film hardness and Young's modulus with thicker films. Contact angle measurements suggested a hydrophilic film. Surface energy increased with greater film thickness, particularly in annealed films, indicating a decrease in contact angle contributing to this increase. Transmittance measurements have revealed intensified absorption and reduced transmittance with thicker films. In summary, the surface roughness of CoFeSm films at different annealing temperatures significantly influenced their magnetic, electrical, adhesive, and optical properties. A smoother surface reduced the pinning effect on the domain walls, enhancing the χac value. Additionally, diminished surface roughness led to a lower contact angle and higher surface energy. Additionally, smoother surfaces exhibited higher carrier conductivity, resulting in reduced electrical resistance. The optical transparency decreased due to the smoother surface of Co60Fe20Sm20 films.

Pneumonitis After Concurrent Chemoradiation and Immune Checkpoint Inhibition in Patients with Locally Advanced Non-small Cell Lung Cancer

AIMS

Pneumonitis is a common and potentially deadly complication of combined chemoradiation and immune checkpoint inhibition (CRT-ICI) in patients with locally advanced non-small cell lung cancer (LA-NSCLC). In this study we sought to identify the risk factors for pneumonitis with CRT-ICI therapy in LA-NSCLC cases and determine its impact on survival.

MATERIALS AND METHODS

We conducted a retrospective chart review of 140 patients with LA-NSCLC who underwent curative-intent CRT-ICI with durvalumab between 2018 and 2021. Pneumonitis was diagnosed by a multidisciplinary team of clinical experts. We used multivariable cause-specific hazard models to identify risk factors associated with grade ≥2 pneumonitis. We constructed multivariable Cox proportional hazard models to investigate the impact of pneumonitis on all-cause mortality.

RESULTS

The median age of the cohort was 67 years; most patients were current or former smokers (86%). The cumulative incidence of grade ≥2 pneumonitis was 23%. Among survivors, 25/28 patients had persistent parenchymal scarring. In multivariable analyses, the mean lung dose (hazard ratio 1.14 per Gy, 95% confidence interval 1.03-1.25) and interstitial lung disease (hazard ratio 3.8, 95% confidence interval 1.3-11.0) increased the risk for pneumonitis. In adjusted models, grade ≥2 pneumonitis (hazard ratio 2.5, 95% confidence interval 1.0-6.2, P = 0.049) and high-grade (≥3) pneumonitis (hazard ratio 8.3, 95% confidence interval 3.0-23.0, P < 0.001) were associated with higher all-cause mortality.

CONCLUSIONS

Risk factors for pneumonitis in LA-NSCLC patients undergoing CRT-ICI include the mean radiation dose to the lung and pre-treatment interstitial lung disease. Although most cases are not fatal, pneumonitis in this setting is associated with markedly increased mortality.

Feasibility and Clinical Implementation of Electron FLASH Radiation Therapy in the Yorkshire Swine Model

PURPOSE/OBJECTIVE(S)

Preclinical studies have shown FLASH radiation therapy (RT) increases the therapeutic index through reduction in normal tissue toxicity but with retained tumor control compared to conventional dose rate (CONV) RT. Dosimetry in FLASH beams is challenging and complex as beam monitoring and proper dosimetry analysis remain uncertain and under investigation. Despite these limitations, clinical translation of FLASH RT has already begun. For translation of FLASH RT from the preclinical stage, it is critical that robust clinical workflows and dosimetry methods be confidently established to ensure patient safety. Here, we present the clinical workflow for the Yorkshire pig, an animal that resembles the body dimension, weight, and biology of a human patient, with the goal to establish standard operating procedures to ensure a safe and robust clinical translation in our upcoming phase I study in cutaneous tumors. The study determines feasibility and safety while finding incidence of dose-limiting toxicities and maximum tolerable dose for future Phase II trials.

MATERIALS/METHODS

All procedures were approved by the institutional animal care and use committee. 6 pigs (40-50 kg) were placed under general anesthesia and underwent CT imaging for radiation therapy simulation purposes. The skin was first shaven, and targets on the dorsolateral flanks were marked with tattoos and BBs for CT visualization. Vacloc immobilization was used to allow for reproducible setup on the treatment couch. A treatment planning model was established for treatment planning and dose evaluation purposes. CONV and FLASH single and fractionated dose regimens were prescribed to the 90% isodose line in a 9 MeV beam. Skin collimation and bolus minimized beam penumbra and increased skin dose. Treatment time and pulse repetition frequency were constant between all FLASH fields. Prescription levels were varied via dose per pulse. Calibration and verification of these settings were performed utilizing a multi-dosimeter method for verification in solid water. Output of the beam was verified on the day of the treatment using beam current transformers. This same multi-dosimeter method was used as in-vivo dosimetry on treatment day and compared to the dose verification ensure full dose was received.

RESULTS

Variation between the three dosimeter methods was found to be within 5% among all pigs within the study. The maximum percent difference between dose verification and dose delivery was 6%. Consideration must be taken in dosimeter readout error due to the surface of the pig skin. FLASH and CONV toxicity results are currently under evaluation and will be published upon completion of the study.

CONCLUSION

Establishing guidelines and protocols for electron FLASH clinical translation is important to instill confidence in patient safety with this new technique. This study has further optimized and developed dosimetry tools and setup to be used in future clinical trials.

Long-Term Outcomes and Toxicity in Esophageal Cancer Patients after Neoadjuvant or Definitive Concurrent Chemotherapy with Proton Beam Therapy

PURPOSE/OBJECTIVE(S)

Proton-beam therapy (PT) is increasingly utilized over three dimensional-conformal radiation therapy (3D-CRT) and intensity modulated radiation therapy (IMRT) photon irradiation for the treatment of various malignancies due to better toxicity reduction. We investigated the long-term outcomes and toxicity in esophageal cancer (EC) patients treated with PT as part of their neoadjuvant concurrent chemoradiation followed by surgery (nCRT) or definitive concurrent chemoradiation (dCRT) treatment regimen.

MATERIALS/METHODS

All consecutively treated, American Joint Committee on Cancer 7th edition clinical stage I-IV EC patients from 2006 to 2022 were retrospectively analyzed. Standard RT dose for most patients was 50.4 Gy/28 fractions. nCRT patients had surgery within 4 months post-RT. Kaplan-Meier method was used to determine overall survival (OS), locoregional recurrence-free survival (LRRFS) and distant metastatic-free survival (DMFS). Acute and chronic RT-related toxicities were graded with Common Terminology Criteria for Adverse Events version 4.0.

RESULTS

There were 510 EC PT patients: 204 (40%) had nCRT and 306 (60%) had dCRT. Most lesions were located in the lower esophagus, of adenocarcinoma histology and treated with passive scatter PT. Overall median follow-up was 72 months. Median, 3- and 5-year OS for all patients were 43 months, 54.1% and 44.9%, respectively. Median LRRFS and DMFS were not reached. Esophagitis was the most common grade ≥3 (G3+) toxicity (59 patients; 28.9%, including a G4 and a G5 toxicity), followed by nausea (29 patients; 14.2%) and esophageal stricture (26 patients, 12.7%). With nCRT, median, 3- and 5-year OS were 80 months, 64.7% and 56.1%, respectively, while the median LRRFS and DMFS were not reached again. Their most common G3+ toxicity was esophagitis in 14 patients (6.9%) followed by nausea (8 patients; 3.9%). An nCRT patient developed G4 RT pneumonitis. Pathological complete response (pCR) was observed in 58 patients (28.4%). Surgery-related pulmonary, cardiac and gastrointestinal complications were reported in 38 (18.6%), 40 (19.6%) and 43 (21.1%) patients, respectively. dCRT patients had a median follow-up of 65 months, and median, 3- and 5-year OS of 32 months, 46.7% and 37.0%, respectively. Although the median LRRFS was not reached, the median DMFS was 74 months. The most observed dCRT G3+ toxicity was esophagitis (45 patients, 22.1%: including both G4 and G5 patients) and then esophageal stricture (23 patients, 11.3%). A dCRT patient developed G4 fistula.

CONCLUSION

To our knowledge, this is the largest single-institutional study on EC long-term outcomes and toxicity using PT. Our cohort reveals good outcomes and mostly mild CRT-related toxicities. Trimodality nCRT with protons demonstrates excellent outcomes relative to the CROSS trial (49.4 months) with identical pCR rate (29% in CROSS) and similar toxicity profile. nCRT with protons should be studied rigorously in the current randomized phase III trial NRG GI006.

Comparing 90-Day Post-Operative Mortality after Neoadjuvant Proton-Based vs. Photon-Based Chemoradiotherapy for Esophageal Cancer

PURPOSE/OBJECTIVE(S)

Standard of treatment for locally advanced esophageal cancer consists of chemoradiotherapy (CRT) followed by surgery. Evidence suggests that proton beam therapy (PBT) results in lower toxicity and fewer post-operative complications compared to photon-based radiotherapy (RT). Mortality in the first 90 days after surgery is a rare event occurring in 2-8% of patients, with higher reported rates (of up to 17%) in older patients. This 90-day mortality (90DM) rate is an important measure of post-operative (non-oncologic) mortality as a proxy of quality of care. We hypothesize that PBT could reduce the incidence of 90DM compared to photon-based RT.

MATERIALS/METHODS

From a single-center retrospectively acquired database patients with esophageal cancer treated with neoadjuvant CRT and esophagectomy in 1998-2022 were selected. Univariable logistic regression analyses were used to study the associations of RT modality and other patient- and treatment-related characteristics with 90DM. Subsequently, 3 separate methods were applied to adjust for confounding bias. These included multivariable logistic regression, 1:1 nearest-neighbor propensity score matching (PSM), and inverse probability of treatment weighting (IPTW). Finally, stratified analyses for patient groups aged ≥67 vs. <67 years were performed.

RESULTS

A total of 894 eligible patients were included (PBT, n = 202; photon-based RT, n = 692). PBT patients had a significantly higher age, better performance score, and a higher number of comorbidities. The 90DM rate was 5 (2.5%) in the PBT group and 29 (4.2%) in the photon-based RT group (p = 0.262). Significant univariable predictors of 90DM included higher age and tumor location. After multivariable adjustment, PBT vs. photon therapy was not significantly associated with 90DM (OR 0.49, 95% CI 0.18-1.31). The 90DM rates in the PSM cohort (n = 181 vs. n = 181) were 2.8% for PBT and 3.3% for photon-based RT (p = 0.379). The 90DM rates in the IPTW cohort were 2.8% for PBT and 4.1% for photon-based RT (p = 0.427). In the full cohort, stratified analysis for age groups revealed that in patients aged ≥67 years, PBT was associated with a decreased risk of 90DM compared to photon-based RT (1.3% vs. 8.8%; p = 0.046), which was not the case in patients aged <67 years. In the PSM cohort, a comparable (but non-significant) difference was observed in favor of PBT in patients aged ≥67 years (i.e., 1.5% vs. 7.5%; p = 0.099). Within-group analyses in the original cohort demonstrated that a higher age significantly increased the risk of 90DM within the photon-based RT group (8.8% vs. 2.7% for age ≥67 vs. <67 years; p = 0.001), but not within the PBT group (1.3% vs. 3.2%; p = 0.398).

CONCLUSION

Post-operative 90DM after esophagectomy for cancer was not significantly different between PBT and photon-based neoadjuvant CRT. However, among older patients we observed a signal that PBT may reduce the risk of 90DM. Higher age increased the risk of 90DM in patients who underwent photon-based RT, but not in patients who underwent PBT.

Prospective Trial of Using Imaging to Predict Pathologic Response and Clinical Outcomes in Locally Advanced Esophageal Cancer

PURPOSE/OBJECTIVE(S)

Trimodality therapy with chemoradiation (CRT) followed by esophagectomy is the standard of care for locally advanced esophageal cancer. An unresolved question is whether pathologic complete response (pCR) can be assessed non-invasively for patients post-CRT. In this study, we assessed whether diffusion-weighted imaging (DWI) with MRI or PET can be used as predictors of pCR and other clinical outcomes after CRT.

MATERIALS/METHODS

Patients were enrolled on a single-arm institutional trial (PA13-0380) assessing the role of imaging in predicting outcomes in potentially resectable esophageal patients undergoing trimodality therapy. All patients received neoadjuvant CRT, and 29 patients had subsequent surgery. DWI MRI and PET scans were obtained at baseline, 2 weeks after the start of CRT (interim) and 4 to 6 weeks after completion of CRT (follow up). Apparent diffusion coefficients (ADCs) were calculated based on DWI images. Circulating tumor DNA was obtained for 27 patients post-radiation using CAPP-Seq. Mann-Whitney tests compared imaging changes associated with pCR. Discrimination of pCR by imaging changes was quantified by received operating characteristics. Youden's index was applied to select optimal thresholds. Kaplan-Meier analysis was performed to assess differences in overall survival (OS) and progression-free survival (PFS) by changes in DWI, PET, and ctDNA parameters.

RESULTS

Our cohort of 60 patients had a median follow up of 42.7 months, age of 65.4 yrs, and ECOG of 1 at completion of CRT. 90% were male, 58% had a history of smoking, and 85% were white. 83% had adenocarcinoma with the rest squamous cell carcinoma. Stages of the patients ranged from IIA to IIIB. All had moderately (47%) or poorly (53%) differentiated disease. All received 41.4-50.4 Gy in 1.8 Gy fractions with the majority receiving 50.4 Gy (95%). 29 patients underwent surgery after CRT of which 8 (27.6%) had pCR. Mean ΔADC from baseline to mid-treatment was most associated with pCR (AUC = 0.98, p<0.001) for patients undergoing surgery. Max ΔADC from baseline to first follow-up was most associated with OS (p = 0.002) and PFS (p<0.001) for the whole cohort. 27 patients had ctDNA analyzed after RT with the presence of ctDNA significantly associated with worse OS (HR = 0.12, p = 0.05) and PFS (HR = 0.10, p = 0.002). Combining ctDNA and max ΔADC generated a model that was more predictive of OS and PFS than either alone. We found that neither the PET parameters of TLG or SUV max at baseline or changes in these parameters from baseline to mid-treatment or first follow-up were as predictive as DWI.

CONCLUSION

We show that changes in DWI is associated with pCR, OS, and PFS in resectable esophageal cancer patients undergoing CRT. DWI was more predictive than PET and a model combining DWI and ctDNA was the most predictive of clinical outcomes. This study shows the significant promise of using DWI in potentially guiding treatment decisions in esophageal cancer patients and will require validation in a larger cohort.

Subacute Cutaneous Toxicity with Single-Fraction Electron FLASH RT in Yorkshire Swine

PURPOSE/OBJECTIVE(S)

Information regarding acute/subacute skin toxicity of electron FLASH radiation therapy (RT) is limited. We evaluated short-term safety of electron FLASH for human trials by investigating subacute toxicity compared to conventional dose-rate RT (CONV) in the Yorkshire pig, an animal model known to closely approximate human skin and routinely used for toxicity studies.

MATERIALS/METHODS

Two healthy 50 kg pigs underwent CT imaging for RT treatment planning with field visualization via BBs and tattoos on each dorsolateral flank. Each target received a single fraction of 20, 25 or 30 Gy with FLASH and CONV on opposing sides delivered using a dedicated mobile linear accelerator. FLASH dose rates ranged from 164-245 Gy/sec (12 pulses delivered over 0.122 sec) while the CONV dose rate was set at 0.18 Gy/sec. Doses were verified using thermo- and optically stimulated luminescent dosimeters, and Gafchromic films. We obtained baseline and weekly images up to 98 days post-RT (D98) for blinded toxicity grading by 3 expert radiation oncologists using the modified RTOG radiation dermatitis (RD) scale. We measured erythema and pigmentation indices on those timepoints using a handheld spectrophotometer. We also obtained punch biopsies of targets and non-irradiated controls on D10 and D30 for RNA sequencing and two 6-marker multiplex immunofluorescence analyses of inflammation, immune response, and fibrosis. FLASH and CONV data were compared using repeated measures ANOVA and transcriptomic analyses using DESeq2.

RESULTS

All RT targets developed peak median grade 4 (ulceration, hemorrhage, or necrosis) RD by D84 regardless of FLASH or CONV delivery. However, FLASH targets developed peak RD later than CONV targets after 20 Gy (D84 vs D63), 25 Gy (D84 vs D49) and 30 Gy (D63 vs D42). FLASH induced qualitatively lower mean pigmentation and erythema indices than CONV for all 3 doses. Similarly, peak mean pigmentation indices occurred later with FLASH vs CONV for 20 Gy (D84 vs D63), 25 Gy (D84 vs D49) and 30 Gy (D77 vs D63). However, peak mean erythema indices occurred on the same day for FLASH and CONV (D63 for 20 Gy and D42 for 25 and 30 Gy). Transcriptomic analyses revealed significantly upregulated signals for wound healing (including TGF-beta, cell adhesion and extracellular matrix receptor interaction) and leukocyte infiltration with 20 Gy CONV mostly by D10, while FLASH upregulated those pathways only after 25 or 30 Gy, or by D30, or never at all. Preliminary immunofluorescence data showed FLASH may induce less T cell infiltrate and TGF-beta-expressing macrophages than CONV.

CONCLUSION

Single-fraction electron FLASH resulted in delayed onsets of both subacute cutaneous toxicity and wound healing with leukocytic infiltration signaling than dose-matched CONV based on both subjective and objective metrics of skin injury. Our findings suggest further investigations of optimal dose of electron FLASH for safe clinical translation is warranted, and we have a dose-finding study currently underway.

Thickness, Annealing, and Surface Roughness Effect on Magnetic and Significant Properties of Co40Fe40B10Dy10 Thin Films

In this study, Co40Fe40B10Dy10 thin films were deposited using a direct current (DC) magnetron sputtering technique. The films were deposited on glass substrates with thicknesses of 10, 20, 30, 40, and 50 nm, and heat-treated in a vacuum annealing furnace at 100, 200, and 300 °C. Various instruments were used to examine and analyze the effects of roughness on the magnetic, adhesive, and mechanical properties. From the low frequency alternating current magnetic susceptibility (χac) results, the optimum resonance frequency is 50 Hz, and the maximum χac value tends to increase with the increase in the thicknesses and annealing temperatures. The maximum χac value is 0.18 at a film thickness of 50 nm and an annealing temperature of 300 °C. From the four-point probe, it is found that the resistivity and sheet resistance values decrease with the increase in film deposition thicknesses and higher annealing temperatures. From the magnetic force microscopy (MFM), the stripe-like magnetic domain distribution is more obvious with the increase in annealing temperature. According to the contact angle data, at the same annealing temperature, the contact angle decreases as the thickness increases due to changes in surface morphology. The maximal surface energy value at 300 °C is 34.71 mJ/mm2. The transmittance decreases with increasing film thickness, while the absorption intensity is inversely proportional to the transmittance, implying that the thickness effect suppresses the photon signal. Smoother roughness has less domain pinning, more carrier conductivity, and less light scattering, resulting in superior magnetic, electrical, adhesive, and optical performance.

Investigation of Sm Addition on Microstructural and Optical Properties of CoFe Thin Films

CoFe-based alloys and rare earth (RE) elements are among the most studied materials in applying magnetic devices to improve soft magnetic characteristics. A series of Co40Fe40Sm20 films are deposited on a glass substrate via the sputtering technique, followed by an annealing process to investigate their effect on microstructural and optical properties of Co40Fe40Sm20 films. In this study, the increase in the thickness of Co40Fe40Sm20 films and annealing temperatures resulted in a smoother surface morphology. The 40 nm Co40Fe40Sm20 films annealed 300 °C are expected to have good wear resistance and adhesive properties due to their high values of H/E ratio and surface energy. Optical transparency also increased due to the smoother surface of the Co40Fe40Sm20 films.

Large-Area Nonfullerene Organic Photovoltaic Modules with a High Certified Power Conversion Efficiency

Achieving large-area organic photovoltaic (OPV) modules with reasonable cost and performance is an important step toward commercialization. In this work, solution-processed conventional and inverted OPV modules with an area of 216 cm² were fabricated by the blade coating method. Film uniformity was controlled by adjusting the fabrication parameters of the blade coating procedure. The influence of the concentration of the solutions of the interfacial materials on OPV module performance was investigated. For OPV modules based on the PM6:Y6 photoactive layer, a certificated power conversion efficiency (PCE) of 9.10% was achieved for the conventional OPV modules based on the TASiW-12 interfacial layer while a certificated PCE of 11.27% was achieved for the inverted OPV modules based on the polyethylenimine (PEI) interfacial layer. As for OPV modules based on a commercially available photoactive layer, PV-X Plus, a PCE of 8.52% was achieved in the inverted OPV modules. A halogen-free solvent, o-xylene, was used as the solvent for PV-X Plus, which makes the industrial production much more environmentally friendly.

The Influence of Oxidation on the Magnetic, Electrical, and Mechanical Properties of Co40Fe40Yb20 Films

A typical body-centered cubic (BCC) CoFe(110) peak was discovered at approximately 2θ = 44.7°. At 2θ = 46°, 46.3°, 47.7°, 55.4°, 54.6°, and 56.4°, the Yb₂O₃ and Co₂O₃ oxide peaks were visible in all samples. However, with a heat treatment temperature of 300 °C, there was no typical peak of CoFe(110). Electrical characteristics demonstrated that resistivity and sheet resistance reduced dramatically as film thickness and annealing temperatures increased. At various heat treatments, the maximum hardness was 10 nm. The average hardness decreased as the thickness increased, and the hardness trend decreased slightly as the annealing temperature was higher. The highest low-frequency alternative-current magnetic susceptibility (χ_ac) value was discovered after being annealed at 200 °C with 50 nm, and the optimal resonance frequency (f_res) was discovered to be within the low-frequency range, indicating that the Co₄₀Fe₄₀Yb₂₀ film can be used in low-frequency applications. The maximum saturation magnetization (Ms) was annealed at 200 °C for 50 nm. Thermal disturbance caused the Ms to decrease as the temperature reached to 300 °C. The results show that when the oxidation influence of as-deposited and thinner films is stronger than annealing treatments and thicker thickness, the magnetic and electrical properties can be enhanced by the weakening peak of the oxide, which can also reduce interference.

Effect of Annealing and Thickness of Co40Fe40Yb20 Thin Films on Various Physical Properties on a Glass Substrate

The aim of this work is to investigate the effect of annealing and thickness on various physical properties in Co₄₀Fe₄₀Yb₂₀ thin films. X-ray diffraction (XRD) was used to determine the amorphous structure of Co₄₀Fe₄₀Yb₂₀ films. The maximum surface energy of 40 nm thin films at 300 °C is 34.54 mJ/mm². The transmittance and resistivity decreased significantly as annealing temperatures and thickness increased. At all conditions, the 10 nm film had the highest hardness. The average hardness decreased as thickness increased, as predicted by the Hall-Petch effect. The highest low-frequency alternative-current magnetic susceptibility (χ_ac) value was discovered when the film was annealed at 200 °C with 50 nm, and the optimal resonance frequency (ƒ_res) was in the low frequency range, indicating that the film has good applicability in the low frequency range. At annealed 200 °C and 50 nm, the maximum saturation magnetization (Ms) was discovered. Thermal disturbance caused the Ms to decrease when the temperature was raised to 300 °C. The optimum process conditions determined in this study are 200 °C and 50 nm, with the highest Ms, χ_ac, strong adhesion, and low resistivity, which are suitable for magnetic applications, based on magnetic properties and surface energy.

Legacy effects of infection in patients with heart failure: a national cohort study of 31,318 patients in Taiwan

Background

Although infection is a common cause of hospitalization in patients (pts) with heart failure (HF), the long-term cardiovascular (CV) prognosis in HF after infection is not well studied.

Methods and results

From 2009 to 2015, 310,485 pts with their first HF admissions and survival to discharge were identified from the National Health Insurance Research Database. Among the pts, 103,505 (33.3%) were readmitted within 1 year after HF discharge for infection, including pneumonia (44.2%), urinary tract infection (UTI) (37.9%), skin and soft tissue infections (9.7%), and others (8.1%). Those without admission for any infection were controls. We compared the primary composite endpoint, including all-cause death, acute myocardial infarction (AMI), stroke, and hospitalization for HF (HHF) between the 2 groups after the infection episode. After propensity score matching, the clinical characteristics (age 71.7±13.9 years, male 52.0%) and treatment were similar between the groups (n=15,659 in each group). In a mean follow-up time of 4.3±2.9 years, 86.2% pts with a history of infection admission and 63.6% pts in the control group met the primary endpoint. Multivariate Cox proportional hazards analysis showed the infection group had a higher risk of the primary composite endpoint (HR 1.760, 95% CI 1.714–1.807), including all-cause death (HR 1.587, 95% CI: 1.540–1.636), HHF (HR 1.993, 95% CI 1.922–2.066), AMI (HR 1.332, 95% CI 1.224–1.450), and stroke (HR 1.769, 95% CI 1.664–1.882). In infection group, HHF was the earliest outcome event with a mean time of 17.5 months and mortality is the second early event with a mean time of 23 months after discharge from the infection episode. Pneumonia carried a higher risk than UTI for the primary composite endpoint (HR 1.140, 95% CI 1.104–1.178).

Conclusions

One-third of HF pts discharged from the hospital experienced acute infection that required readmission. The pts had worse CV prognosis after readmission for infectious disease compared to those without infection

Funding Acknowledgement

Type of funding sources: Private hospital(s). Main funding source(s): This study is supported by National Cheng Kung University Hospital and Tainan Hospital, Ministry of Health and Welfare, Taiwan.

Effects of Annealing and Thickness of Co60Fe20Yb20 Nanofilms on Their Structure, Magnetic Properties, Electrical Efficiency, and Nanomechanical Characteristics

X-ray diffraction (XRD) analysis showed that metal oxide peaks appear at 2θ = 47.7°, 54.5°, and 56.3°, corresponding to Yb₂O₃ (440), Co₂O₃ (422), and Co₂O₃ (511). It was found that oxide formation plays an important role in magnetic, electrical, and surface energy. For magnetic and electrical measurements, the highest alternating current magnetic susceptibility (χ_ac) and the lowest resistivity (×10^-2 Ω·cm) were 0.213 and 0.42, respectively, and at 50 nm, it annealed at 300 °C due to weak oxide formation. For mechanical measurement, the highest value of hardness was 15.93 GPa at 200 °C in a 50 nm thick film. When the thickness increased from 10 to 50 nm, the hardness and Young's modulus of the Co₆₀Fe₂₀Yb₂₀ film also showed a saturation trend. After annealing at 300 °C, Co₆₀Fe₂₀Yb₂₀ films of 40 nm thickness showed the highest surface energy. Higher surface energy indicated stronger adhesion, allowing for the formation of multilayer thin films. The optimal condition was found to be 50 nm with annealing at 300 °C due to high χ_ac, strong adhesion, high nano-mechanical properties, and low resistivity.

[Association between periodontitis and mild cognitive impairment: a clinical pilot study]

Objective: To evaluate the association between periodontitis and mild cognitive impairment (MCI), and explore the potential local oral risk factors for MCI. Methods: The study included 70 middle-aged and elderly subjects (44 females and 26 males) with periodontal disease who were first diagnosed by the Department of Periodontology or referred by the Department of Geriatrics in Shanghai Ninth People's Hospital, Shanghai Jiao Tong University School of Medicine from January 2021 to January 2022. In this study, the control group consisted of periodontal disease patients without cognitive impairment, and the case group (MCI group) consisted of those diagnosed with MCI referred by the geriatrics specialists. Full-mouth periodontal examinations of all subjects were performed and periodontal indicators were recorded by periodontists, while digital panoramic radiographs were taken. The severity of periodontitis was defined according to the 1999 classification, and the staging and grading of periodontitis were defined according to the 2018 American Academy of Periodontology and European Federation of Periodontology classification. The mini-mental state examination scale was chosen by geriatricians to evaluate the cognitive function of the included subjects. The cubital venous blood was drawn to detect the expression levels of inflammatory factors such as hypersensitive C-reactive protein (hs-CRP), interleukin (IL)-1β, IL-6 and tumor necrosis factor-α(TNF-α) in serum. Independent-samples t test and chi-square test were used to analyze the differences in population factors, periodontal-related indexes and serum inflammatory factors between the two groups (α=0.05). Odds ratios (OR) for MCI according to the severity of periodontitis and main periodontal clinical indexes were calculated by binary Logistic analysis. Results: Thirty-nine subjects were included in the control group and thirty-one in the MCI group. The age of the study population was (58.3±6.2) years (range: 45-70 years). The comparison between two groups showed that the control group was with higher educational background (χ²=9.45, P=0.024) and 2.6 years younger than the MCI group [(57.1±6.0) years vs. (59.7±6.3) years, t=-1.24, P=0.082]. The number and proportion of moderate to severe periodontitis in control group were significantly lower compared to those in MCI group (17 cases with 43.6% vs. 23 cases with 74.2%, χ²=6.61, P=0.010), and the OR of moderate to severe periodontitis adjusted by age and educational background was 3.00 (95%CI: 1.01-8.86, P=0.048). Compared with the grading (χ²=5.56, P=0.062) of periodontitis, staging had a greater impact on MCI (χ²=7.69, P=0.041), moreover the proportion of MCI in stage Ⅰ grade A periodontitis was significantly lower than any other type of periodontitis (χ²=13.86, P=0.036). In addition, less presence of deep periodontal pockets [probing depth (PD)≥6 mm] (17.9% vs. 41.9%, χ²=4.87, P=0.027), fewer number of PD≥4 mm (6.48±6.70 vs. 11.03±8.91, t=-2.44, P=0.017), lower plaque index (1.42±0.56 vs. 1.68±0.57, t=-1.91, P=0.059) and gingival index (1.68±0.29 vs. 1.96±0.30, t=-3.93, P<0.001) were in the control group than in the MCI group. However, there were no significant differences between the two groups in the levels of serum inflammatory factors, such as hs-CRP, IL-1β, IL-6 and TNF-α (P>0.05). Conclusions: It appears a strong correlation between moderate to severe periodontitis and the incidence of MCI in middle-aged and elderly people. Moreover, deep and increased number of periodontal pockets, poor oral hygiene, and severe gingival inflammation can be potentially associated risk factors for MCI.

Polarization-Dependent Gratings Based on Polymer-Dispersed Liquid Crystal Cells with In-Plane Switching Electrodes

A diffraction grating of polymer-dispersed liquid crystal (PDLC) with polarization-selective characteristics is investigated. Electrically controllable gratings are produced using In-Plane Switching (IPS) electrodes. Indium tin oxide (ITO) electrodes with a stripe pattern are used to generate a horizontal electric field parallel to the substrate on a single glass substrate. It is known from the experimental results that the number of diffraction orders can be controlled by applied voltage. Except for the zeroth order, the consistently highest intensity can be obtained for every other order of diffraction, and the polarization direction of the diffraction is perpendicular to the direction of the electrode stripes. The polarization direction of the zeroth order diffraction is parallel to the direction of the electrode stripes. Therefore, it can be used as a filter for light polarization.

Electrically controllable terahertz metamaterials with large tunabilities and low operating electric fields using electrowetting-on-dielectric cells

A simple method that is compatible with all geometrical structures of terahertz (THz) metamaterials for increasing their frequency tunabilities and decreasing their operating electric fields is proposed. This method uses the displacement of glycerol droplets with various volumes to tune the resonance frequency of a THz metamaterial in an electrowetting-on-dielectric (EWOD) cell. The experimental results reveal that the THz metamaterial has a large frequency tunability of 28% at an operating electric field that is smaller than 0.2 V/µm as the glycerol droplets move in and out of the path of a THz beam. The frequency tunability is large because the near field of the metamaterial "experiences" a large difference between the refractive indices of glycerol and air. The EWOD cell with the THz metamaterial is a great achievement for developing electrically controllable band-stop filters with large frequency tunabilities and small operating electric fields.

Annealing Effect on the Characteristics of Co40Fe40W10B10 Thin Films on Si(100) Substrate

This research explores the behavior of Co₄₀Fe₄₀W₁₀B₁₀ when it is sputtered onto Si(100) substrates with a thickness (t_f) ranging from 10 nm to 100 nm, and then altered by an annealing process at temperatures of 200 °C, 250 °C, 300 °C, and 350 °C, respectively. The crystal structure and grain size of Co₄₀Fe₄₀W₁₀B₁₀ films with different thicknesses and annealing temperatures are observed and estimated by an X-ray diffractometer pattern (XRD) and full-width at half maximum (FWHM). The XRD of annealing Co₄₀Fe₄₀W₁₀B₁₀ films at 200 °C exhibited an amorphous status due to insufficient heating drive force. Moreover, the thicknesses and annealing temperatures of body-centered cubic (BCC) CoFe (110) peaks were detected when annealing at 250 °C with thicknesses ranging from 80 nm to 100 nm, annealing at 300 °C with thicknesses ranging from 50 nm to 100 nm, and annealing at 350 °C with thicknesses ranging from 10 nm to 100 nm. The FWHM of CoFe (110) decreased and the grain size increased when the thickness and annealing temperature increased. The CoFe (110) peak revealed magnetocrystalline anisotropy, which was related to strong low-frequency alternative-current magnetic susceptibility (χ_ac) and induced an increasing trend in saturation magnetization (Ms) as the thickness and annealing temperature increased. The contact angles of all Co₄₀Fe₄₀W₁₀B₁₀ films were less than 90°, indicating the hydrophilic nature of Co₄₀Fe₄₀W₁₀B₁₀ films. Furthermore, the surface energy of Co₄₀Fe₄₀W₁₀B₁₀ presented an increased trend as the thickness and annealing temperature increased. According to the results, the optimal conditions are a thickness of 100 nm and an annealing temperature of 350 °C, owing to high χ_ac, large Ms, and strong adhesion; this indicates that annealing Co₄₀Fe₄₀W₁₀B₁₀ at 350 °C and with a thickness of 100 nm exhibits good thermal stability and can become a free or pinned layer in a magnetic tunneling junction (MTJ) application.

Organic Solvent Sensors Using Polymer-Dispersed Liquid Crystal Films with a Pillar Pattern

An organic solvent sensor of polymer-dispersed liquid crystals (PDLCs) film is fabricated by a combination of tri-functional monomers and LCs. When the patterned PDLC film comes into contact with the organic solvent, the organic solvent will penetrate into the film to induce the orientation of the liquid crystals, which will change from an ordered to a disordered state, which causes the PDLC film to scatter incident light. The experiment used acetone and ethanol as the organic solvents of interest. The results show that the patterned PDLC film has a stronger response to acetone than to ethanol. Based on the difference in the intensity of light scattering and the response time of the patterned PDLC film to different organic solvents, the results can be used to identify and recognize different types of organic solvents.

Tunable Microwave Dielectric Properties of Ca0.6La0.8/3TiO3 and Ca0.8Sm0.4/3TiO3-Modified (Mg0.6Zn0.4)0.95Ni0.05TiO3 Ceramics with a Near-Zero Temperature Coefficient

The microstructures and microwave dielectric properties of (Mg_0.6Zn_0.4)_0.95Ni_0.05TiO₃ with Ca_0.6La_0.8/3TiO₃ and Ca_0.8Sm_0.4/3TiO₃ additions prepared by the solid-state method has been investigated. The crystallization and microstructures of these two mixed dielectrics were checked by XRD, EDX, BEI, and SEM to demonstrate two phase systems. Furthermore, the tunable dielectric properties can be achieved by adjusting the amounts of Ca_0.6La_0.8/3TiO₃ and Ca_0.8Sm_0.4/3TiO₃ additions, respectively. After optimization of processed parameters, a new dielectric material system 0.88(Mg_0.6Zn_0.4)_0.95Ni_0.05TiO₃-0.12Ca_0.6La_0.8/3TiO₃ possesses a permittivity (ε_r) of 24.7, a Qf value of 106,000 (GHz), and a τ_f value of 3.8 (ppm/°C), with sintering temperature at 1225 °C for 4 h. This dielectric system with a near-zero temperature coefficient and appropriate microwave properties revealed a high potential for high-quality substrates adopted in wireless communication devices.

Polymeric Hole Transport Materials for Red CsPbI3 Perovskite Quantum-Dot Light-Emitting Diodes

In this study, the performances of red CsPbI₃-based all-inorganic perovskite quantum-dot light-emitting diodes (IPQLEDs) employing polymeric crystalline Poly(3-hexylthiophene-2,5-diyl) (P3HT), poly(9-vinycarbazole) (PVK), Poly(N,N'-bis-4-butylphenyl-N,N'-bisphenyl)benzidine (Poly-TPD) and 9,9-Bis[4-[(4-ethenylphenyl)methoxy]phenyl]-N2,N7-di-1-naphthalenyl-N2,N7-diphenyl-9H-fluorene-2,7-diamine (VB-FNPD) as the hole transporting layers (HTLs) have been demonstrated. The purpose of this work is an attempt to promote the development of device structures and hole transporting materials for the CsPbI₃-based IPQLEDs via a comparative study of different HTLs. A full-coverage quantum dot (QD) film without the aggregation can be obtained by coating it with VB-FNPD, and thus, the best external quantum efficiency (EQE) of 7.28% was achieved in the VB-FNPD device. We also reported a standing method to further improve the degree of VB-FNPD polymerization, resulting in the improved device performance, with the EQE of 8.64%.

P4648Retrograde flow in aortic isthmus in fetuses with congenital heart defects and computer flow dynamic modeling

Background and objectives

Retrograde flow (RF) in the aortic isthmus is frequently observed in fetuses in various hemodynamic states including congenital heart defects (CHD). This study sought to: 1) establish the association between this observation and variables of CHD by fetal echocardiography (FE); and 2) to computer flow dynamic (CFD) model to probe the causes and mechanisms underlying this observation.

Methods

A total of 256 (gestational age (GA) 26.3±9.8 weeks) fetuses with CHD and 168 (GA: 25.8±10.3weeks) with normal FE were examined from January, 2011 to May, 2016. The study group was divided into: 1) no RF, 2) end systolic RF, end diastolic RF, systolic RF, diastolic RF, and systolic and diastolic RF sub-groups (Figure upper). GA, cerebroplacental ratio (CPR) of pulsatility index (PI) in middle cerebral and umbilical arteries, cardiothoracic area ratio (CTR), left and right atrial dimensions (LA/RA), left and right ventricular dimensions (LV/RV), aortic and pulmonary artery dimensions (AO/PA), and aortic isthmus and ductal arch dimensions (AI/DA), velocity ratio of aorta and pulmonary artery (AO/PAv), aortic isthmus and ductal arch in systolic (AI/DAvs) and diastolic (AI/DAvd). Using principal component analysis (PCA), the component score coefficient matrix and optional variance percent (OVP) was calculated by PCA and the RF pattern was simulated by CFD (Figure lower).

Results

RF modeling by CFD was feasible (Figure B). Component analysis by PCA showed that four types of variables were associated with RF: 1) Structural variables contribute 23.7% OVP, including LV/RV, LA/ RA, AO/PA, and IS/DA; 2) Resistance variables 16.8% OVP, i.e. CPR; 3) Growth variables 12.2% OVP, i,e, GA and CTR; and 4) Velocity variables 10.9% OVP, i.e. AO/PAv, AI/DAvd.

Retrograde flow by fetal echo and CFD

Conclusions

Retrograde flow in the aortic isthmus is associated with structural, resistance, growth, and velocity variables in fetal circulation in various CHD and normal 3rd trimester pregnancies. Simulation and modeling by CFD is feasible and may be useful to understand the causes and mechanisms of retrograde flow and its utility in diagnosis and prognosis in CHD.

Acknowledgement/Funding

Research on prevention and control of reproductive health and major birth defects

Chlorophyll fluorescence analysis in diverse rice varieties reveals the positive correlation between the seedlings salt tolerance and photosynthetic efficiency

BACKGROUND

Photosynthetic efficiency might be a key factor determining plant resistance to abiotic stresses. Plants can sense when growing conditions are not favorable and trigger an internal response at an early stage before showing external symptoms. When a high amount of salt enters the plant cell, the membrane system and function of thylakoids in chloroplasts could be destroyed and affect photosynthetic performance if the salt concentration is not regulated to optimal values. Oryza species have salt-tolerant and salt-sensitive genotypes; however, very few studies have investigated the genetic architecture responsible for photosynthetic efficiency under salinity stress in cultivated rice.

RESULTS

We used an imaging-based chlorophyll fluorometer to monitor eight rice varieties that showed different salt tolerance levels for four consecutive days under control and salt conditions. An analysis of the changes in chlorophyll fluorescence parameters clearly showed the maximum quantum efficiency of PSII in sensitive varieties was significantly reduced after NaCl treatment when compared to tolerant varieties. A panel of 232 diverse rice accessions was then analyzed for chlorophyll fluorescence under salt conditions, the results showed that chlorophyll fluorescence parameters such as F0 and NPQ were higher in Japonica subspecies, ΦPSII of Indica varieties was higher than that in other subgroups, which suggested that the variation in photosynthetic efficiency was extensively regulated under salt treatment in diverse cultivated rice. Two significant regions on chromosome 5 were identified to associate with the fraction of open PSII centers (qL) and the minimum chlorophyll fluorescence (F0). These regions harbored genes related to senescence, chloroplast biogenesis and response to salt stress are of interest for future functional characterization to determine their roles in regulating photosynthesis.

CONCLUSIONS

Rice plant is very sensitive to salinity stress, especially at young seedling stage. Our work identified the distribution pattern of chlorophyll fluorescence parameters in seedlings leaf and their correlations with salt tolerance level in a diverse gene pool. We also revealed the complexity of the genetic architecture regulating rice seedling photosynthetic performance under salinity stress, the germplasm analyzed in this study and the associated genetic information could be utilized in rice breeding program.

Molecular characterization and phylogenetic analysis of dengue viruses imported into Taiwan during 2011-2016

A total of 1,596 laboratory-confirmed imported dengue cases were identified in Taiwan during 2011–2016. Most of the imported cases arrived from Southeast Asia as well as the Indian subcontinent, the Pacific region, Latin America, Australia and Africa. Phylogenetic analyses of the complete envelope protein gene sequences from 784 imported dengue virus (DENV) isolates were conducted, and the results suggest that the DENV-1 genotype I and DENV-2 Cosmopolitan genotype comprise the predominant serotype/genotype of DENV strains circulating in Southeast Asia. The DENV-1 genotype III, DENV-3 genotype III and DENV-4 genotype I and II strains were found to be newly emerging in several Southeast Asian countries. Our results also showed that geographical restrictions of DENV-1 genotype I, DENV-1 genotype III and DENV-2 Cosmopolitan genotype are becoming blurred, indicating the extensive introductions and continuous expansions of DENV strains between nations in Southeast Asia. In this study, we present the geographic distribution and dynamic transmission of DENV strains circulating in Southeast Asian countries. In addition, we demonstrated local dengue epidemics caused by several imported DENV strains in Taiwan during 2011–2016.

Dengue is the most prevalent mosquito-borne viral disease in the world. The expansion of dengue viruses to different parts of the world has been accelerated by the increase in worldwide travel and trade. In this study, we present the results of a laboratory-based dengue surveillance in Taiwan during 2011–2016. A total of 1,596 laboratory-confirmed imported dengue cases were identified. The travelers were infected in 29 countries in Southeast Asia, the Indian subcontinent, the Pacific region, Latin America, Australia and Africa. Phylogenetic analyses of the envelope gene sequences of 784 imported dengue virus isolates suggest that the DENV-1 genotype I and DENV-2 Cosmopolitan genotype comprise the predominant serotype/genotype DENV strains circulating in Southeast Asia. Our results also showed that geographical restrictions of some of the DENV genotypes are becoming blurred, indicating the extensive introductions and continuous expansions of DENV strains between countries in Southeast Asia. In addition, we demonstrated dengue outbreaks in Taiwan caused by viruses imported from Asia and the Americas. The DENV envelope gene sequences from this study will contribute to a better understanding of the genetic evolution, dynamic transmission and global expansion of dengue viruses.

Using Hematuria as Detection of Post-kidney Transplantation Upper Urinary Tract Urothelial Carcinoma Is Associated With Delayed Diagnosis of Cancer Occurrence

OBJECTIVES

Kidney transplantation (KT) is an important renal replacement therapy for end-stage renal disease (ESRD). The incidence of upper urinary tract urothelial carcinoma (UTUC) is relatively higher in Taiwan. According to our institutional database, early onset of post-KT UTUC is not uncommon. Early detection of post-KT UTUC is an important issue to improve oncologic outcome. Because painless hematuria is a common symptom for UTUC, this study analyzes whether using hematuria as post-KT UTUC screening delayed cancer diagnosis or not.

METHODS

From 2005 to 2012, 128 ESRD patients were found to have UTUCs. There were 28 patients who underwent KT and were regularly followed up at our institution. All the patients underwent standard nephroureterectomy.

RESULTS

In ESRD patients with UTUC, the post-KT group revealed significantly less gross hematuria and microscopic hematuria at presentation compared with the non-KT group (43% versus 76%, P = .001 and 64% versus 86%, P = .011). For those patients with gross hematuria, non-organ-confined UTUC occurred more in the post-KT group compared with the non-KT group (42% versus 12%, P = .009). For those patients with microscopic hematuria, non-organ-confined UTUC occurred more in the post-KT group compared with the non-KT group with borderline significance (33% versus 16%, P = .085).

CONCLUSIONS

According to our observation, using gross or microscopic hematuria as detection of post-KT UTUC is associated with delayed diagnosis of cancer occurrence. Closer upper urinary tract image study such as sonography may help earlier cancer screening.

All-optically controllable nanoparticle random laser in a well-aligned laser-dye-doped liquid crystal

This study reports for the first time an all-optically controllable nanoparticle random laser (NPRL) in a well-aligned laser-dye-doped liquid crystal (LDDLC) cell added with NPs and azo-dyes. Experimental results display that the NPRL can be obtained when the pumped energy exceeds the energy threshold (~3.5 μJ/pulse). The occurrence of the NPRL is attributable to the enhancement of the fluorescence by the multi-scattering events of the fluorescence photons from the randomly distributed NPs in the diffusion rout of the well-aligned LDDLC cell. In addition, the lasing intensity of the NPRL can decrease with increasing irradiation time of one UV beam. Continuing irradiation of one green beam following the UV illumination can increasingly recover the lasing intensity of the NPRL. The all-optically reversible controllability of the NPRL is basically attributed to the successive UV-beam-induced increase and green-beam-induced decrease in the randomness of the LDDLC via their interactions with the curved cis and rod-like trans isomers after the accumulation of the trans→cis and cis→trans back isomerizations of the azo-dyes, respectively. The former and latter mechanisms can decrease and increase the laser-dye's absorption and thus the induced spontaneous emission, respectively. These consequences can decrease and increase the lasing intensity, or equivalently, increase and decrease the energy threshold for the occurrence of the NPRL, respectively.

[Study of coenzyme Q10 in the liver of preeclampsia pregnant rats]

OBJECTIVE

To investigate the protective effect of coenzyme Q10 (CoQ10) in the liver of preeclampsiapregnant rats and the potential etiology.

METHODS

Fifty pregnant SD rats were equally divided into the normal pregnant (NP) group (n=10) and the preeclampsia (PE) group (n=40) randomly. The PE rats (n=40) were equally divided into four groups randomly, distilled water (DW) group, CoQ10 group, CoQ10 combined magnesium(CM) group and magnesium (Mg) group were established by treating the preeclampsia rats on day 15 to 21 of gestation with different measures. As for all the 50 rats, systolic blood pressure (SBP) of rat tail was detected on day 10, 15 and 21 of gestation respectively, 24 hours proteinuria analysis were detected on day 10, 15 and 21 of gestation respectively, levels of alanine aminotransferase (ALT), aspartate aminotransferase (AST) in blood andsuperoxide dismutase (SOD), glutathione peroxidase (GSH-PX), malondialdehyde (MDA), caspase-3, Bcl-2 and Bax protein expression in liver tissue were detected by western blot assay on day 21 of gestation.

RESULTS

(1) SBP and 24 hours proteinuria analysis: there was no statistic difference among all the five groups on day 10 of gestation (P>0.05). Whereas, SBP and 24 hours proteinuria analysis were significantly higher in CoQ10 group, CoQ10 combined CM group, CM group and DW group than that in NP group on day 15, 21 of gestation (P<0.05). And SBP and 24 hours proteinuria analysis were significantly lower in CoQ10 group, CoQ10 combined CM group and CM group than that in DW group on day 21 of gestation (P<0.05). (2) Liver function: among CoQ10 group, CoQ10 combined CM group, CM group, DW group and NP group, serum levels of ALT were respectively (52±7) , (34±9) , (49±10) , (70±19) , (30±7) U/L; and serum levels of AST were respectively (169±25) , (84±11) , (159±20) , (281±26) and (78±18) U/L. ALT and AST serum levels were significantly higher in CoQ10 group, CM group and DW group than that in NP group (P<0.05). ALT and AST serum levels were significant lower in CoQ10 combined CM group than those in CoQ10 group, CM group and DW group, respectively (P<0.05). ALT and AST serum levels were significant lower in CoQ10 group and CM group than that in DW group, respectively (P<0.05). (3) SOD, GSH-PX, MDA, caspase-3, Bcl-2 and Bax expression in liver tissue of rats: SOD expression was significant higher in CoQ10 group, CoQ10 combined CM group than thoes in CM group, DW group and NP group (P<0.05) ; SOD expression was significant lower in CM group, DW grouo than thoes in NP group (P<0.05) ; and SOD expression was significant higher in CM group than that in DW group (P<0.05) . Compared with CoQ10 group, CoQ10 combined CM group, CW group and DW group respectively, the GSH-PX and Bcl-2 protein expressions were significant higher in NP group (P<0.05) , while MDA, caspase-3 and Bax protein expressions were significant lower in NP group (P<0.05) ; compared with CoQ10 group, CoQ10 combined CM group and CW group respectively, the GSH-PX and Bcl-2 protein expressions were significant lower in DW group (P<0.05) , while MDA, caspase-3 and Bax protein expressions were significant higher in DW group (P<0.05) .

CONCLUSIONS

Oxidative stress and apoptosis levles were upregulated in PE pregnant liver tissues. CoQ10 could effectively protect the liver by improving the liver functions and decreasing the apoptosis of liver cells in PE pregnant rats, and markedly decrease the oxidative stress and apoptosis in the livers. The protective roles of CoQ10 in liver might through its function of anti-oxidative stress and inhibiting cell apoptosis by regulating the balance of Bcl-2/Bax.

Association of Epstein-Barr virus infection with systemic lupus erythematosus in Taiwan

An association between Epstein-Barr virus (EBV) infection and systemic lupus erythematosus (SLE) has been suggested from previous serologic evidence. Since most adults in Taiwan are EBV-infected, seroepidemiologic studies based on standard assays for EBV are unlikely to dissociate SLE patients and control groups. We reexamine this question by using novel methodologies in which IgA anti-EBV-coded nuclear antigens-1 (EBNA-1) and IgG anti-EBV DNase antibodies were analysed by ELISA, and EBV viral loads were detected by real-time quantitative PCR for 93 adult SLE patients and 370 age-, sex- and living place-matched healthy controls in Taiwan. The specificities of antibodies for extractible nuclear antigens were determined by Western blot. Our results show that IgA anti-EBV EBNA1 antibodies were detectable in 31.2% SLE patients but only in 4.1% of controls (odds ratio [OR] = 10.72, 95% confidence interval [CI] = 5.19–22.35; P < 10-7), IgG anti-EBV DNase antibodies were detected in 53.8% SLE patients but only in 12.2% controls (OR = 8.40, 95% CI = 4.87–14.51; P < 10-7). EBV DNA was amplifiable from the sera of 41.9% SLE patients but from only 3.24% controls ( P < 0.05). A significant association of IgG anti-EBV DNase antibodies with anti-Sm/RNP antibodies was observed ( P < 0.005). The higher seroreactivity and higher copy numbers of EBV genome indicated association of EBV infection with SLE in Taiwan.

Efficacy of percutaneous radiofrequency ablation for the treatment of hepatocellular carcinoma

In this study, we sought to evaluate the efficacy of transcatheter arterial chemoembolization (TACE) plus radiofrequency ablation (RFA; experimental group) versus RFA treatment (control group) in patients receiving palliative treatment for hepatocellular carcinoma. To summarize the available evidence, we used the Review Manager 5.1 software to perform a meta-analysis of English-language articles published in public databases prior to 2014. Based on 6 studies that met the inclusion criteria, a total of 531 (experimental group, 272; control group, 259) patients with hepatocellular carcinoma were included in the meta-analysis. The meta-analysis demonstrated that the experimental group had a higher 3-year survival rate [risk ratios (RRs) = 1.41; 95% confidence interval (CI) = 1.03-1.94; P < 0.05] and a higher 2-year survival rate (RR = 1.11; 95%CI = 1.01-1.23; P < 0.05) than the control group. In the overall meta-analysis, the overall RRs were 2.02 (95%CI = 1.40-2.91; P < 0.05) and 1.63 (95%CI = 1.06-2.51; P < 0.05) for 3- and 5-year recurrence-free survival, respectively. Furthermore, the overall meta-analysis showed an overall RR of 0.75 (95%CI = 0.60-0.93; P < 0.05) for the incidence of tumor progression and an overall RR of 1.19 (95%CI = 0.33-4.33; P > 0.05) for the major complication rate. In a sensitivity analysis, the above mentioned meta-analytic estimates were unchanged by the removal of 1 study at a time. The meta-analysis suggested that the experimental group had a higher survival rate, a higher recurrence-free survival rate, and a lower incidence of tumor progression than the corresponding control group.

Electrically controllable Fresnel lens in 90° twisted nematic liquid crystals

This study presents a theoretical analysis and experimental demonstration of an electrically controllable Fresnel lens in a 90° twisted nematic liquid crystal cell. The cell gap was chosen to satisfy the Gooch-Tarry conditions, and therefore, the polarization rotation effect was valid regardless of the incident polarization direction. The polarization sensitivity of the diffraction efficiency of the 90° twisted nematic Fresnel lens was dependent on the applied voltage regime. Theoretical calculations effectively explain the experimental results.

Quantum-mechanical approach to predissociation of water dimers in the vibrational adiabatic representation: Importance of channel interactions

The results of application of the quantum-mechanical adiabatic theory to vibrational predissociation (VPD) of water dimers, (H2O)2 and (D2O)2, are presented. We consider the VPD processes including the totally symmetric OH mode of the dimer and the bending mode of the fragment. The VPD in the adiabatic representation is induced by breakdown of the vibrational adiabatic approximation, and two types of nonadiabatic coupling matrix elements are involved: one provides the VPD induced by the low-frequency dissociation mode and the other provides the VPD through channel interactions induced by the low-frequency modes. The VPD rate constants were calculated using the Fermi golden rule expression. A closed form for the nonadiabatic transition matrix element between the discrete and continuum states was derived in the Morse potential model. All of the parameters used were obtained from the potential surfaces of the water dimers, which were calculated by the density functional theory procedures. The VPD rate constants for the two processes were calculated in the non-Condon scheme beyond the so-called Condon approximation. The channel interactions in and between the initial and final states were taken into account, and those are found to increase the VPD rates by 3(1) orders of magnitude for the VPD processes in (H2O)2 ((D2O)2). The fraction of the bending-excited donor fragments is larger than that of the bending-excited acceptor fragments. The results obtained by quantum-mechanical approach are compared with both experimental and quasi-classical trajectory calculation results.

Screening alpha-glucosidase and alpha-amylase inhibitors from natural compounds by molecular docking in silico

The alpha-glucosidase inhibitor is a common oral anti-diabetic drug used for controlling carbohydrates normally converted into simple sugars and absorbed by the intestines. However, some adverse clinical effects have been observed. The present study seeks an alternative drug that can regulate the hyperglycemia by down-regulating alpha-glucosidase and alpha-amylase activity by molecular docking approach to screen the hyperglycemia antagonist against alpha-glucosidase and alpha-amylase activities from the 47 natural compounds. The docking data showed that Curcumin, 16-hydroxy-cleroda-3,13-dine-16,15-olide (16-H), Docosanol, Tetracosanol, Antroquinonol, Berberine, Catechin, Quercetin, Actinodaphnine, and Rutin from 47 natural compounds had binding ability towards alpha-amylase and alpha-glucosidase as well. Curcumin had a better biding ability of alpha-amylase than the other natural compounds. Analyzed alpha-glucosidase activity reveals natural compound inhibitors (below 0.5 mM) are Curcumin, Actinodaphnine, 16-H, Quercetin, Berberine, and Catechin when compared to the commercial drug Acarbose (3 mM). A natural compound with alpha-amylase inhibitors (below 0.5 mM) includes Curcumin, Berberine, Docosanol, 16-H, Actinodaphnine/Tetracosanol, Catechin, and Quercetin when compared to Acarbose (1 mM). When taken together, the implication is that molecular docking is a fast and effective way to screen alpha-glucosidase and alpha-amylase inhibitors as lead compounds of natural sources isolated from medicinal plants.

Exploration of natural product ingredients as inhibitors of human HMG-CoA reductase through structure-based virtual screening

Cholesterol plays an important role in living cells. However, a very high level of cholesterol may lead to atherosclerosis. HMG-CoA (3-hydroxy-3-methylglutaryl coenzyme A) reductase is the key enzyme in the cholesterol biosynthesis pathway, and the statin-like drugs are inhibitors of human HMG-CoA reductase (hHMGR). The present study aimed to virtually screen for potential hHMGR inhibitors from natural product to discover hypolipidemic drug candidates with fewer side effects and lesser toxicities. We used the 3D structure 1HWK from the PDB (Protein Data Bank) database of hHMGR as the target to screen for the strongly bound compounds from the traditional Chinese medicine database. Many interesting molecules including polyphenolic compounds, polisubstituted heterocyclics, and linear lipophilic alcohols were identified and their ADMET (absorption, disrtibution, metabolism, excretion, toxicity) properties were predicted. Finally, four compounds were obtained for the in vitro validation experiments. The results indicated that curcumin and salvianolic acid C can effectively inhibit hHMGR, with IC50 (half maximal inhibitory concentration) values of 4.3 µM and 8 µM, respectively. The present study also demonstrated the feasibility of discovering new drug candidates through structure-based virtual screening.

Role of the CKIP1 gene in proliferation and apoptosis of the human lung cancer cell line H1299

Casein kinase 2 interacting protein 1 (CKIP1) is a specific interacting protein of the casein kinase 2 (CK2) α subunit, and, by binding CK2 and other proteins, functions as an adaptor to regulate a series of cellular functions. Previous studies suggested that CKIP1 might play an important role in regulating oncogenic activities. However, few studies examining the function of CKIP1 in cancer cells have been performed. The present study aimed to investigate the role of CKIP1 in lung cancer. CKIP1 mRNA expression was detected in 5 human lung cancer cell lines (H-125, H1299, LTEP-A-2, SPC-A-1, and NCL-H446) by semi-quantitative RT-PCR, and in 10 noncancerous lung tissues and 30 non-small lung cancer tissues by real-time quantitative PCR. A lentivirus-mediated small interfering RNA (siRNA) was used to knock down CKIP1 expression in the H1299 cell line. To elucidate the impact of CKIP1 downregulation on H1299 cells, cell proliferation, DNA synthesis, and cell cycle distribution and apoptosis were measured by high content screening assay, BrdU incorporation, and flow cytometric analyses, respectively. CKIP1 mRNA was highly expressed both in H1299 cells and lung cancer tissues. We found that downregulation of CKIP1 resulted in suppression of proliferation and colony-forming ability of H1299 cells, and led to S phase cell cycle arrest and G2 phase promotion, as well as a significant enhancement of H1299 cell apoptosis. Our study indicated that high expression levels of CKIP1 were associated with the development of lung cancer, and that CKIP1 knockdown may block tumor cell growth mainly by promoting cell apoptosis.

First Report of Corn Kernel Brown Spot Disease Caused by Mucor irregularis in China

In October 2012, a brown spot disease was found on corn kernels during a field survey in Nanyang city (33°01' N, 112°29' E), China. The incidences of affected ears and kernels were 2 to 10% (n = 600) and 0.08 to 0.4% (n = 25,000), respectively. Symptoms first appeared as circular or irregular brown spots on the endosperm. These spots subsequently enlarged or coalesced, resulting in the formation of a large light-brown or light-yellow irregular speckle commonly surrounded by a dark-brown edge. Pure fungal cultures with similar morphological characteristics were obtained from surface-disinfected symptomatic kernels using a conventional method for isolation of culturable microbes. The isolated fungal cultures were purified by single-spore isolation (3). A representative isolate F1 was randomly selected, used for pathogenicity tests, and identified using morphological and molecular methods. Colonies on PDA were circular with abundant villiform aerial mycelia. The color of colonies was white-gray at first and turned to light yellow or became ochraceous after 3 days of incubation at 28°C. Hyphae were hyaline and less septate, with rectangular branches. Sporangiophores were erect and unbranched or branched, with globose sporangia formed on their tips. Sporangiospores were elliptical to round, 3.6 to 7.3 × 1.6 to 3.7 μm (n = 100) in size. Two gene regions were amplified for multilocus sequence typing. The D1/D2 region of the nuclear large subunit ribosomal RNA gene (nucLSU) was amplified with primers NL1 and NL4 and the rDNA internal transcribed spacer (ITS) with primers ITS1 and ITS4. PCR products were purified using an Axygen nucleic acid purification kit for sequencing. Both rDNA D1/D2 and rDNA-ITS sequences were submitted to GenBank with accession numbers KM093834 and KM203872, respectively. The isolate F1 showed 98% identity with two isolates of Mucor irregularis (KC524427 and KC461926) in rDNA-ITS sequences and 99% identity with multiple isolates (JX976221, JX976203, and JX976219) of M. irregularis in rDNA D1/D2 sequences. Pathogenicity tests of isolate F1 were conducted based on Koch's postulates. Thirty kernels of fresh ears (milk stage) were pricked by sterilized toothpicks and separately inoculated with a sporangiospore suspension (1 × 10⁶ spores/ml) and 5-day-old mycelial plugs (5 × 5 mm) of isolate F1. Kernels on ears that were inoculated with sterilized water and pure PDA plugs were separately used as controls. After 7 days of incubation, brown spot symptoms developed on the F1-inoculated kernels, which were similar to those observed on the naturally infected ears from the field samples. The control ears remained symptomless during the inoculation tests. Fungal cultures showing the same morphological characteristics as those of isolate F1 were consistently recovered from the diseased cobs inoculated by isolate F1, indicating that M. irregularis was responsible for corn kernel brown spot disease. M. irregularis was reported as a pathogen causing human skin diseases in China (5), America (1), and India (2) and as a phytopathogen causing fruit rot on durian (4). This is the first report of M. irregularis causing corn kernel brown spot disease in China. References: (1) M. M. Abuali et al. J. Clin. Microbiol. 47:4176, 2009. (2) B. M. Hemashettar et al. J. Clin. Microbiol. 49:2372, 2011. (3) S. L. Huang and K. Kohmoto. Bull. Fac. Agric., Tottori Univ. 44:1, 1991. (4) W. F. Wang et al. Plant Quarant. l23:60, 2009. (5) Y. Zhao et al. Mycopathologia 168:243, 2009.

Spatially tunable photonic bandgap of wide spectral range and lasing emission based on a blue phase wedge cell

This study demonstrates for the first time a continuously tunable photonic bandgap (PBG) of wide spectral range based on a blue phase (BP) wedge cell. A continuously shifting PBG of the BP wedge cell occurs due to the thickness gradient of the wedge cell at a fixed temperature. The wedge cell provides a gradient of boundary force on the LCs and thus forms a distribution of BP crystal structure with a gradient lattice. Additionally, a spatially tunable lasing emission based on a dye-doped BP (DDBP) wedge cell is also demonstrated. The tunable band of the PBG and lasing emission is about 130 nm and 70 nm, respectively, which tuning spectral ranges are significantly wider than those of CLC and DDCLC wedge cells, respectively. Such a BP device has a significant potential in applications of tunable photonic devices and displays.

Study on a negative hydrogen ion source with hot cathode arc discharge

A negative hydrogen (H(-)) ion source with hot cathode arc discharge was designed and fabricated as a primary injector for a 10 MeV PET cyclotron at IMP. 1 mA dc H(-) beam with ɛ N, RMS = 0.08 π mm mrad was extracted at 25 kV. Halbach hexapole was adopted to confine the plasma. The state of arc discharge, the parameters including filament current, arc current, gas pressure, plasma electrode bias, and the ratio of I(e(-))/I(H(-)) were experimentally studied. The discussion on the result, and opinions to improve the source were given.

Polarization-independent and fast tunable microlens array based on blue phase liquid crystals

This work investigates a polarization-independent and fast response microlens array. This array is composed of a concave polymer microlens array and blue phase liquid crystals (BPLCs). The microlens array can be either positive or negative, depending on the birefringence of the BPLCs. The experimental results show that the microlens array is fast switched between positive and negative focal lengths via controlling the electric fields, and the response time is a few hundred microseconds. Additionally, the focusing efficiency is independent of the polarization of the incident light.

First Report of Pepper Fruit Rot Caused by Fusarium concentricum in China

Pepper (Capsicum annuum L.) is an important vegetable crop worldwide. Some Fusarium species can cause pepper fruit rot, leading to significant yield losses of pepper production and, for some Fusarium species, potential risk of mycotoxin contamination. A total of 106 diseased pepper fruit samples were collected from various pepper cultivars from seven provinces (Gansu, Hainan, Heilongjiang, Hunan, Shandong, Shanghai, and Zhejiang) in China during the 2012 growing season, where pepper production occurs on approximately 25,000 ha. Pepper fruit rot symptom incidence ranged from 5 to 20% in individual fields. Symptomatic fruit tissue was surface-sterilized in 0.1% HgCl₂ for 1 min, dipped in 70% ethanol for 30 s, then rinsed in sterilized distilled water three times, dried, and plated in 90 mm diameter petri dishes containing potato dextrose agar (PDA). After incubation for 5 days at 28°C in the dark, putative Fusarium colonies were purified by single-sporing. Forty-three Fusarium strains were isolated and identified to species as described previously (1,2). Morphological characteristics of one strain were identical to those of F. concentricum. Aerial mycelium was reddish-white with an average growth rate of 4.2 to 4.3 mm/day at 25°C in the dark on PDA. Pigments in the agar were formed in alternating red and orange concentric rings. Microconidia were 0- to 1-septate, mostly 0-septate, and oval, obovoid to allantoid. Macroconidia were relatively slender with no significant curvature, 3- to 5-septate, with a beaked apical cell and a foot-shaped basal cell. To confirm the species identity, the partial TEF gene sequence (646 bp) was amplified and sequenced (GenBank Accession No. KC816735). A BLASTn search with TEF gene sequences in NCBI and the Fusarium ID databases revealed 99.7 and 100% sequence identity, respectively, to known TEF sequences of F. concentricum. Thus, both morphological and molecular criteria supported identification of the strain as F. concentricum. This strain was deposited as Accession MUCL 54697 (http://bccm.belspo.be/about/mucl.php). Pathogenicity of the strain was confirmed by inoculating 10 wounded, mature pepper fruits that had been harvested 70 days after planting the cultivar Zhongjiao-5 with a conidial suspension (1 × 10⁶ spores/ml), as described previously (3). A control treatment consisted of inoculating 10 pepper fruits of the same cultivar with sterilized distilled water. The fruit were incubated at 25°C in a moist chamber, and the experiment was repeated independently in triplicate. Initially, green to dark brown lesions were observed on the outer surface of inoculated fruit. Typical soft-rot symptoms and lesions were observed on the inner wall when the fruit were cut open 10 days post-inoculation. Some infected seeds in the fruits were grayish-black and covered by mycelium, similar to the original fruit symptoms observed at the sampling sites. The control fruit remained healthy after 10 days of incubation. The same fungus was isolated from the inoculated infected fruit using the method described above, but no fungal growth was observed from the control fruit. To our knowledge, this is the first report of F. concentricum causing a pepper fruit rot. References: (1) J. F. Leslie and B. A. Summerell. The Fusarium Laboratory Manual. Blackwell Publishing, Ames, IA, 2006. (2) K. O'Donnell et al. Proc. Nat. Acad. Sci. USA 95:2044, 1998. (3) Y. Yang et al. 2011. Int. J. Food Microbiol. 151:150, 2011.

Association between clinical complete response and pathological complete response after preoperative chemoradiation in patients with gastroesophageal cancer: analysis in a large cohort

BACKGROUND

Chemoradiation followed by surgery is the preferred treatment of localized gastroesophageal cancer (GEC). Surgery causes considerable life-altering consequences and achievement of clinical complete response (clinCR; defined as postchemoradiation [but presurgery] endoscopic biopsy negative for cancer and positron emission tomographic (PET) scan showing physiologic uptake) is an enticement to avoid/delay surgery. We examined the association between clinCR and pathologic complete response (pathCR).

PATIENTS AND METHODS

Two hundred eighty-four patients with GEC underwent chemoradiation and esophagectomy. The chi-square test, Fisher exact test, t-test, Kaplan-Meier method, and log-rank test were used.

RESULTS

Of 284 patients, 218 (77%) achieved clinCR. However, only 67 (31%) of the 218 achieved pathCR. The sensitivity of clinCR for pathCR was 97.1% (67/69), but the specificity was low (29.8%; 64/215). Of the 66 patients who had less than a clinCR, only 2 (3%) had a pathCR. Thus, the rate of pathCR was significantly different in patients with clinCR than in those with less than a clinCR (P < 0.001).

CONCLUSIONS

clinCR is not highly associated with pathCR; the specificity of clinCR for pathCR is too low to be used for clinical decision making on delaying/avoiding surgery. Surgery-eligible GEC patients should be encouraged to undergo surgery following chemoradiation despite achieving a clinCR.

Face recognition/detection by probabilistic decision-based neural network

This paper proposes a face recognition system, based on probabilistic decision-based neural networks (PDBNN). With technological advance on microelectronic and vision system, high performance automatic techniques on biometric recognition are now becoming economically feasible. Among all the biometric identification methods, face recognition has attracted much attention in recent years because it has potential to be most nonintrusive and user-friendly. The PDBNN face recognition system consists of three modules: First, a face detector finds the location of a human face in an image. Then an eye localizer determines the positions of both eyes in order to generate meaningful feature vectors. The facial region proposed contains eyebrows, eyes, and nose, but excluding mouth (eye-glasses will be allowed). Lastly, the third module is a face recognizer. The PDBNN can be effectively applied to all the three modules. It adopts a hierarchical network structures with nonlinear basis functions and a competitive credit-assignment scheme. The paper demonstrates a successful application of PDBNN to face recognition applications on two public (FERET and ORL) and one in-house (SCR) databases. Regarding the performance, experimental results on three different databases such as recognition accuracies as well as false rejection and false acceptance rates are elaborated. As to the processing speed, the whole recognition process (including PDBNN processing for eye localization, feature extraction, and classification) consumes approximately one second on Sparc10, without using hardware accelerator or co-processor.

Clinical parameters model for predicting pathologic complete response following preoperative chemoradiation in patients with esophageal cancer

BACKGROUND

Approximately 25% of patients with esophageal cancer (EC) who undergo preoperative chemoradiation, achieve a pathologic complete response (pathCR). We hypothesized that a model based on clinical parameters could predict pathCR with a high (≥60%) probability.

PATIENTS AND METHODS

We analyzed 322 patients with EC who underwent preoperative chemoradiation. All the patients had baseline and postchemoradiation positron emission tomography (PET) and pre- and postchemoradiation endoscopic biopsy. Logistic regression models were used for analysis, and cross-validation via the bootstrap method was carried out to test the model.

RESULTS

The 70 (21.7%) patients who achieved a pathCR lived longer (median overall survival [OS], 79.76 months) than the 252 patients who did not achieve a pathCR (median OS, 39.73 months; OS, P = 0.004; disease-free survival, P = 0.003). In a logistic regression analysis, the following parameters contributed to the prediction model: postchemoradiation PET, postchemoradiation biopsy, sex, histologic tumor grade, and baseline (EUS)T stage. The area under the receiver-operating characteristic curve was 0.72 (95% confidence interval [CI] 0.662-0.787); after the bootstrap validation with 200 repetitions, the bias-corrected AU-ROC was 0.70 (95% CI 0.643-0.728).

CONCLUSION

Our data suggest that the logistic regression model can predict pathCR with a high probability. This clinical model could complement others (biomarkers) to predict pathCR.

Adiabatically slow and adiabatically fast driven ratchets

We revisit two known models of deterministically driven ratchets, which exhibit high energetic efficiency, with the goal to uncover similarities and differences in the principles of their operation. Both the models rely on adiabaticity of the potential change process, however, the adiabaticity that we deal with in the two cases is of different types, slow and fast. It is shown that in the former (latter) case the drift velocity is an even (odd) functional of the potential, with the notable consequence that for the adiabatically slow driven ratchet the necessary symmetry breaking occurs only due to time-dependent parametric perturbations, while the spatial asymmetry of the potential is a mandatory condition for the adiabatically fast driven ratchet to operate. To treat energetic characteristics, the models are restated in terms of traveling potential ratchets. With such an approach, we find that in these cases (i) the conditions of high energetic efficiency to be reached are similar, and (ii) the symmetry properties of the kinetic coefficients are different. Based on our results, a strategy for designing efficient Brownian motors is suggested.

Development of DRAGON electron cyclotron resonance ion source at Institute of Modern Physics

A new room temperature electron cyclotron resonance (ECR) ion source, DRAGON, is under construction at IMP. DRAGON is designed to operate at microwaves of frequencies of 14.5-18 GHz. Its axial solenoid coils are cooled with evaporative medium to provide an axial magnetic mirror field of 2.5 T at the injection and 1.4 T at the extraction, respectively. In comparison to other conventional room temperature ECR ion sources, DRAGON has so far the largest bore plasma chamber of inner diameter of 126 mm with maximum radial fields of 1.4-1.5 T produced by a non-Halbach permanent sextupole magnet.

Status of the laser ion source at IMP

A laser (Nd:YAG laser, 3 J, 1064 nm, 8-10 ns) ion source has been built and under development at IMP to provide pulsed high-charge-state heavy ion beams to a radio frequency quadrupole (RFQ) for upgrading the IMP accelerators with a new low-energy beam injector. The laser ion source currently operates in a direct plasma injection scheme to inject the high charge state ions produced from a solid target into the RFQ. The maximum power density on the target was about 8.4 × 10(12) W∕cm(2). The preliminary experimental results will be presented and discussed in this paper.

A 2.45 GHz electron cyclotron resonance proton ion source and a dual-lens low energy beam transport

The structure and preliminary commissioning results of a new 2.45 GHz ECR proton ion source and a dual-lens low energy beam transport (LEBT) system are presented in this paper. The main magnetic field of the ion source is provided by a set of permanent magnets with two small electro-solenoid magnets at the injection and the extraction to fine tune the magnetic field for better microwave coupling. A 50 keV pulsed proton beam extracted by a three-electrode mechanism passes through the LEBT system of length of 1183 mm. This LEBT consists of a diagnosis chamber, two Glaser lenses, two steering magnets, and a final beam defining cone. A set of inner permanent magnetic rings is embedded in each of the two Glaser lenses to produce a flatter axial-field to reduce the lens aberrations.

Study of ion beam transport from the SECRAL electron cyclotron resonance ion source at the Institute of Modern Physics

Ion beam transport from the Superconducting Electron Cyclotron Resonance ion source with Advanced design in Lanzhou (SECRAL) electron cyclotron resonance ion source was studied at the Institute of Modern Physics during 2010. Particle-in-cell simulations and experimental results have shown that both space charge and magnetic aberrations lead to a larger beam envelope and emittance growth. In the existing SECRAL extraction beam line, it has been shown that raising the solenoid lens magnetic field reduces aberrations in the subsequent dipole and results in lower emittance. Detailed beam emittance measurements are presented in this paper.