1
|
Kwag JH, Lindsey M, Hogan T, Hinton B, Reed WR. Enhancing Clinical Accuracy in DIBH Pattern Detection with a Combined Ultrasonic and IR Sensor System. Int J Radiat Oncol Biol Phys 2023; 117:e681-e682. [PMID: 37786005 DOI: 10.1016/j.ijrobp.2023.06.2143] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/04/2023]
Abstract
PURPOSE/OBJECTIVE(S) This study aimed to develop a DIBH monitoring system using IR (Infrared- VL6180X Time of Flight) distance sensors and a microcontroller, and to demonstrate its functionality and performance in various irregular free and DIBH breathings from the left breast and lung patients. MATERIALS/METHODS A total of ten patients who performed DIBH breathing for treatment planning and optimized treatment delivery were randomly selected for the study. The breathing motion of the system was tested using an RPM (Real-Time Positioning Management) phantom. The IR sensors were interfaced with an Arduino microcontroller, and a body phantom was used to mimic the DIBH pattern on a CT scan. The detector holder was mounted perpendicularly between the xiphoid and umbilicus, with the ability to compensate for various patient body habitus and adapt to clinical setups. The plastic devices were 3D printed, and the sensors were mounted approximately 100mm apart to receive directed echo signals and prevent unwanted signals from scattering. RESULTS The IR sensor DIBH system was able to detect and record the patient's breathing pattern in real-time. The IR sensor showed better visualization of breathing rhythm with fewer fluctuations and reduced noise than the previous ultrasonic sensor system. The breathing amplitude and duration for the patients were compared to our treatment planning of Varian Eclipse and verified in TrueBeam's Breath-Hold Gating mode. The amplitude and duration from the primary study were measured to ±5mm, including 3mm sensor noise level and ±1.5 second. CONCLUSION The IR sensor DIBH system demonstrated better performance compared to the ultrasonic sensor, with a better visualization of breathing rhythm and reduced fluctuations and noise. It provided a clinically acceptable DIBH pattern for monitoring chest and abdominal motion in patients with irregular breathing. The findings of this study have the potential to enhance clinical accuracy in radiation therapy treatment planning and delivery for patients undergoing DIBH.
Collapse
Affiliation(s)
- J H Kwag
- North Mississippi Medical Center, Tupelo, MS
| | - M Lindsey
- North Mississippi Medical Center, Tupelo, MS
| | - T Hogan
- North Mississippi Medical Center, Tupelo, MS
| | - B Hinton
- University of Alabama at Birmingham, Birmingham, AL
| | - W R Reed
- North Mississippi Medical Center, Tupelo, MS
| |
Collapse
|
2
|
Reed WR, Shahan M, Ross G, Blackwell D, Peters S. Field comparison of a roof bolter dry dust collection system with an original designed wet collection system for dust control. Min Metall Explor 2020; 37:1885-1898. [PMID: 33898926 PMCID: PMC8064737 DOI: 10.1007/s42461-020-00290-x] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 03/20/2020] [Accepted: 08/17/2020] [Indexed: 06/12/2023]
Abstract
Dust collectors for roof bolting machines generally use a dry box to collect the roof bolting material. Recently, an underground mining operation converted a dry box dust collector to a wet box dust collector with a unique exception from MSHA for testing purposes. Water is routed to the roof bolter from the main water line of the continuous miner. The wet box utilizes a water spray to wet the incoming material. Testing was conducted comparing the two different collector types. Respirable dust concentrations surrounding the roof bolter with the different collection boxes were similar. The main difference in respirable dust concentrations occurred when cleaning the dust boxes. The average respirable dust concentration during cleaning of the wet box was 0.475 mg/m3, and during the cleaning of the dry box, the average respirable dust concentration was 1.188 mg/m3, a 60% reduction in respirable dust concentration. The quartz content of the roof material was high, ranging from 28.9 to 52.7% during this study. The results from this study indicate that using the wet box as a collector reduced exposure to respirable dust up to 60% when cleaning the collector boxes.
Collapse
Affiliation(s)
| | | | - G. Ross
- J.H. Fletcher & Co., Inc., Huntington, WV, USA
| | - D. Blackwell
- Blue Mountain Energy, Deserado Mine, Rangely, CO, USA
| | - S. Peters
- Blue Mountain Energy, Deserado Mine, Rangely, CO, USA
| |
Collapse
|
3
|
Reed WR, Shahan M, Ross G, Singh K, Cross R, Grounds T. Field investigation to measure airflow velocities of a ram dump car using circular routing at a Midwestern underground coal mine: a case study. Environ Monit Assess 2019; 191:515. [PMID: 31346812 PMCID: PMC6697381 DOI: 10.1007/s10661-019-7624-8] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/24/2019] [Accepted: 07/01/2019] [Indexed: 06/10/2023]
Abstract
Due to the successful application of roof bolter canopy air curtains (CACs) to protect roof bolter operators from high levels of coal mine respirable dust, a shuttle car CAC is currently being developed. Since a shuttle car consistently trams from the continuous miner to the feeder and back at a speed up to 9.66 kph (6 mph) or 2.68 m/s (528 fpm), it is thought that the shuttle car may encounter very high air velocities (mine ventilation air velocity + max shuttle speed (2.68 m/s (528 fpm)). Past research and preliminary lab testing showed that CAC protection in high interference air velocities is difficult to achieve. Therefore, testing was conducted at a Midwestern US coal mine to determine the air velocities their shuttle car actually encounters. This mine used ram dump cars as their shuttle cars. Results showed that coal mine dust exposure is generally very low at the feeder and when tramming. Elevated concentrations are encountered at the ram dump car operator position when the car is being loaded by the continuous miner. Recorded air velocities while tramming did not reach the max air velocity of mine ventilation air velocity + 2.68 m/s (528 fpm) calculated as 3.32 m/s (653 fpm). High velocities, while encountered, were of low frequency and associated with low respirable coal mine dust concentrations. Therefore, using this new information, designing the shuttle car CAC for maximum interference air velocity may not be as important as previously thought.
Collapse
Affiliation(s)
| | | | - G Ross
- J.H. Fletcher & Co., Huntington, WV, USA
| | - K Singh
- Prairie State Generating Company LLC, Lively Grove, IL, USA
| | - R Cross
- Prairie State Generating Company LLC, Lively Grove, IL, USA
| | - T Grounds
- Prairie State Generating Company LLC, Lively Grove, IL, USA
| |
Collapse
|
4
|
Shahan M, Reed WR, Yekich M, Ross G. Field investigation to measure airflow velocities of a shuttle car using independent routes at a central Appalachian underground coal mine. ACTA ACUST UNITED AC 2018; 70:45-51. [PMID: 30573922 DOI: 10.19150/me.8601] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Abstract
Canopy air curtains on roof bolting machines have been proven to protect miners from respirable dust, preventing their overexposure to dust. Another desired application for canopy air curtains is in the compartments of shuttle cars. The challenges faced in developing the design of canopy air curtains for shuttle cars include mine ventilation rates in tandem with the shuttle car tram speeds. The resulting cab airspeeds may exceed 182 m/min (600 fpm), as found in the present study conducted in a central Appalachian underground coal mine by U.S. National Institute for Occupational Safety and Health (NIOSH) researchers. Prior research and laboratory testing had indicated that successfully protecting a miner in high air velocities is difficult, because the clean air from the canopy air curtain is unable to penetrate through the high-velocity mine air. In this study, the dust concentrations to which a shuttle car operator was exposed were measured, and air velocities experienced by the operator were measured as well using a recording vane anemometer. The results indicate that the highest exposure to respirable dust, 2.22 mg/m3, occurred when the shuttle car was loading at the continuous miner, where the average airspeed was 48 m/min (157 fpm). While tramming, the operator was exposed to 0.77 mg/m3 of respirable dust with an average airspeed of 62 m/min (203 fpm). This study indicates that a canopy air curtain system can be designed to greatly reduce an operator's exposure to respirable dust by providing clean air to the operator, as the majority of the operator's dust exposure occurs in air velocities slower than 61 m/min (200 fpm).
Collapse
Affiliation(s)
| | | | | | - G Ross
- J.H. Fletcher & Co., Huntington, WV, USA
| |
Collapse
|
5
|
Reed WR, Zheng Y, Yekich M, Ross G, Salem A. Laboratory testing of a shuttle car canopy air curtain for respirable coal mine dust control. Int J Coal Sci Technol 2018; 10:1007. [PMID: 30294491 PMCID: PMC6169800 DOI: 10.1007/s40789-018-0225-2] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/11/2018] [Revised: 06/11/2018] [Accepted: 09/06/2018] [Indexed: 05/06/2023]
Abstract
Canopy air curtain (CAC) technology has been developed by the National Institute for Occupational Safety and Health (NIOSH) for use on continuous miners and subsequently roof bolting machines in underground coal mines to protect operators of these machines from overexposure to respirable coal mine dust. The next logical progression is to develop a CAC for shuttle cars to protect operators from the same overexposures. NIOSH awarded a contract to Marshall University and J.H. Fletcher to develop the shuttle car CAC. NIOSH conducted laboratory testing to determine the dust control efficiency of the shuttle car CAC. Testing was conducted on two different cab configurations: a center drive similar to that on a Joy 10SC32AA cab model and an end drive similar to that on a Joy 10SC32AB cab model. Three different ventilation velocities were tested-0.61, 2.0, 4.3 m/s (120, 400, and 850 fpm). The lowest, 0.61 m/s (120 fpm), represented the ventilation velocity encountered during loading by the continuous miner, while the 4.3 m/s (850 fpm) velocity represented ventilation velocity airflow over the shuttle car while tramming against ventilation airflow. Test results showed an average of the dust control efficiencies ranging from 74 to 83% for 0.61 m/s (120 fpm), 39%-43% for 2.0 m/s (400 fpm), and 6%-16% for 4.3 m/s (850 fpm). Incorporating an airflow spoiler to the shuttle car CAC design and placing the CAC so that it is located 22.86 cm (9 in.) forward of the operator improved the dust control efficiency to 51%-55% for 4.3 m/s (850 fpm) with minimal impact on dust control efficiencies for lower ventilation velocities. These laboratory tests demonstrate that the newly developed shuttle car CAC has the potential to successfully protect shuttle car operators from coal mine respirable dust overexposures.
Collapse
Affiliation(s)
- W. R. Reed
- Pittsburgh Mining Research Division, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 626 Cochrans Mill Rd., Pittsburgh, PA 15236 USA
| | - Y. Zheng
- Pittsburgh Mining Research Division, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 626 Cochrans Mill Rd., Pittsburgh, PA 15236 USA
| | - M. Yekich
- Pittsburgh Mining Research Division, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health, 626 Cochrans Mill Rd., Pittsburgh, PA 15236 USA
| | - G. Ross
- J.H. Fletcher, Inc., Huntington, WV USA
| | - A. Salem
- Marshall University, Huntington, WV USA
| |
Collapse
|
6
|
Zheng Y, Reed WR, Potts JD, Li M, Rider JP. Dust control by air-blocking shelves and dust collector-to-bailing airflow ratios for a surface mine drill shroud. Min Eng 2018; 70:69-74. [PMID: 29780181 PMCID: PMC5956536 DOI: 10.19150/me.8238] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/08/2023]
Abstract
The National Institute for Occupational Safety and Health (NIOSH) recently developed a series of validated models utilizing computational fluid dynamics (CFD) to study the effects of air-blocking shelves on airflows and respirable dust distribution associated with medium-sized surface blasthole drill shrouds as part of a dry dust collector system. Using validated CFD models, three different air-blocking shelves were included in the present study: a 15.2-cm (6-in.)-wide shelf; a 7.6-cm (3-in.)-wide shelf; and a 7.6-cm (3-in.)-wide shelf at four different shelf heights. In addition, the dust-collector-to-bailing airflow ratios of 1.75:1, 1.5:1, 1.25:1 and 1:1 were evaluated for the 15.2-cm (6-in.)-wide air-blocking shelf. This paper describes the methodology used to develop the CFD models. The effects of air-blocking shelves and dust collector-to-bailing airflow ratios were identified by the study, and problem regions were revealed under certain conditions.
Collapse
Affiliation(s)
- Y Zheng
- Associate service fellow, mining engineer, branch chief, mining engineer and acting team leader, respectively, at the Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health (CDC NIOSH), Pittsburgh, PA, USA
| | - W R Reed
- Associate service fellow, mining engineer, branch chief, mining engineer and acting team leader, respectively, at the Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health (CDC NIOSH), Pittsburgh, PA, USA
| | - J D Potts
- Associate service fellow, mining engineer, branch chief, mining engineer and acting team leader, respectively, at the Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health (CDC NIOSH), Pittsburgh, PA, USA
| | - M Li
- Associate service fellow, mining engineer, branch chief, mining engineer and acting team leader, respectively, at the Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health (CDC NIOSH), Pittsburgh, PA, USA
| | - J P Rider
- Associate service fellow, mining engineer, branch chief, mining engineer and acting team leader, respectively, at the Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health (CDC NIOSH), Pittsburgh, PA, USA
| |
Collapse
|
7
|
Reed WR, Beck TW, Zheng Y, Klima S, Driscoll J. Foam property tests to evaluate the potential for longwall shield dust control. ACTA ACUST UNITED AC 2018; 70:35-41. [PMID: 29416179 DOI: 10.19150/me.7977] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Abstract
Tests were conducted to determine properties of four foam agents for their potential use in longwall mining dust control. Foam has been tried in underground mining in the past for dust control and is currently being reconsidered for use in underground coal longwall operations in order to help those operations comply with the Mine Safety and Health Administration's lower coal mine respirable dust standard of 1.5 mg/m3. Foams were generated using two different methods. One method used compressed air and water pressure to generate foam, while the other method used low-pressure air generated by a blower and water pressure using a foam generator developed by the U.S. National Institute for Occupational Safety and Health. Foam property tests, consisting of a foam expansion ratio test and a water drainage test, were conducted to classify foams. Compressed-air-generated foams tended to have low expansion ratios, from 10 to 19, with high water drainage. Blower-air-generated foams had higher foam expansion ratios, from 30 to 60, with lower water drainage. Foams produced within these ranges of expansion ratios are stable and potentially suitable for dust control. The test results eliminated two foam agents for future testing because they had poor expansion ratios. The remaining two foam agents seem to have properties adequate for dust control. These material property tests can be used to classify foams for their potential use in longwall mining dust control.
Collapse
Affiliation(s)
- W R Reed
- W.R. Reed, T.W. Beck, Y. Zheng, S. Klima, members SME, and J. Driscoll are research mining engineer, research engineer, associate service fellow, mining engineer and engineering technician, respectively, at the National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA, USA
| | - T W Beck
- W.R. Reed, T.W. Beck, Y. Zheng, S. Klima, members SME, and J. Driscoll are research mining engineer, research engineer, associate service fellow, mining engineer and engineering technician, respectively, at the National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA, USA
| | - Y Zheng
- W.R. Reed, T.W. Beck, Y. Zheng, S. Klima, members SME, and J. Driscoll are research mining engineer, research engineer, associate service fellow, mining engineer and engineering technician, respectively, at the National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA, USA
| | - S Klima
- W.R. Reed, T.W. Beck, Y. Zheng, S. Klima, members SME, and J. Driscoll are research mining engineer, research engineer, associate service fellow, mining engineer and engineering technician, respectively, at the National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA, USA
| | - J Driscoll
- W.R. Reed, T.W. Beck, Y. Zheng, S. Klima, members SME, and J. Driscoll are research mining engineer, research engineer, associate service fellow, mining engineer and engineering technician, respectively, at the National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA, USA
| |
Collapse
|
8
|
Reed WR, Joy GJ, Kendall B, Bailey A, Zheng Y. Development of a roof bolter canopy air curtain for respirable dust control. ACTA ACUST UNITED AC 2017; 69:33-29. [PMID: 28413231 DOI: 10.19150/me.7010] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Abstract
Testing of the roof bolter canopy air curtain (CAC) designed by the U.S. National Institute for Occupational Safety and Health (NIOSH) has gone through many iterations, demonstrating successful dust control performance under controlled laboratory conditions. J.H. Fletcher & Co., an original equipment manufacturer of mining equipment, further developed the concept by incorporating it into the design of its roof bolting machines. In the present work, laboratory testing was conducted, showing dust control efficiencies ranging from 17.2 to 24.5 percent. Subsequent computational fluid dynamics (CFD) analysis revealed limitations in the design, and a potential improvement was analyzed and recommended. As a result, a new CAC design is being developed, incorporating the results of the testing and CFD analysis.
Collapse
Affiliation(s)
- W R Reed
- W.R. Reed, member SME, G.J. Joy and Y. Zheng, member SME, are lead research mining engineer, senior scientist and associate service fellow, respectively, at the U.S. National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA, USA, while B. Kendall, member SME, and A. Bailey are director of new business development and design engineer & documentation manager, respectively, at J.H. Fletcher & Co., Huntington, WV, USA
| | - G J Joy
- W.R. Reed, member SME, G.J. Joy and Y. Zheng, member SME, are lead research mining engineer, senior scientist and associate service fellow, respectively, at the U.S. National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA, USA, while B. Kendall, member SME, and A. Bailey are director of new business development and design engineer & documentation manager, respectively, at J.H. Fletcher & Co., Huntington, WV, USA
| | - B Kendall
- W.R. Reed, member SME, G.J. Joy and Y. Zheng, member SME, are lead research mining engineer, senior scientist and associate service fellow, respectively, at the U.S. National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA, USA, while B. Kendall, member SME, and A. Bailey are director of new business development and design engineer & documentation manager, respectively, at J.H. Fletcher & Co., Huntington, WV, USA
| | - A Bailey
- W.R. Reed, member SME, G.J. Joy and Y. Zheng, member SME, are lead research mining engineer, senior scientist and associate service fellow, respectively, at the U.S. National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA, USA, while B. Kendall, member SME, and A. Bailey are director of new business development and design engineer & documentation manager, respectively, at J.H. Fletcher & Co., Huntington, WV, USA
| | - Y Zheng
- W.R. Reed, member SME, G.J. Joy and Y. Zheng, member SME, are lead research mining engineer, senior scientist and associate service fellow, respectively, at the U.S. National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA, USA, while B. Kendall, member SME, and A. Bailey are director of new business development and design engineer & documentation manager, respectively, at J.H. Fletcher & Co., Huntington, WV, USA
| |
Collapse
|
9
|
Abstract
Testing was conducted to determine the ability of foam to maintain roof coverage in a simulated longwall mining environment. Approximately 27 percent of respirable coal mine dust can be attributed to longwall shield movement, and developing controls for this dust source has been difficult. The application of foam is a possible dust control method for this source. Laboratory testing of two foam agents was conducted to determine the ability of the foam to adhere to a simulated longwall face roof surface. Two different foam generation methods were used: compressed air and blower air. Using a new imaging technology, image processing and analysis utilizing ImageJ software produced quantifiable results of foam roof coverage. For compressed air foam in 3.3 m/s (650 fpm) ventilation, 98 percent of agent A was intact while 95 percent of agent B was intact on the roof at three minutes after application. At 30 minutes after application, 94 percent of agent A was intact while only 20 percent of agent B remained. For blower air in 3.3 m/s (650 fpm) ventilation, the results were dependent upon nozzle type. Three different nozzles were tested. At 30 min after application, 74 to 92 percent of foam agent A remained, while 3 to 50 percent of foam agent B remained. Compressed air foam seems to remain intact for longer durations and is easier to apply than blower air foam. However, more water drained from the foam when using compressed air foam, which demonstrates that blower air foam retains more water at the roof surface. Agent A seemed to be the better performer as far as roof application is concerned. This testing demonstrates that roof application of foam is feasible and is able to withstand a typical face ventilation velocity, establishing this technique's potential for longwall shield dust control.
Collapse
Affiliation(s)
- W R Reed
- Research mining engineer, associate service fellow, mining engineer, mechanical engineer and research engineer, respectively, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health (CDC-NIOSH), Pittsburgh Mining Research Division, Pittsburgh, PA, USA
| | - Y Zheng
- Research mining engineer, associate service fellow, mining engineer, mechanical engineer and research engineer, respectively, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health (CDC-NIOSH), Pittsburgh Mining Research Division, Pittsburgh, PA, USA
| | - S Klima
- Research mining engineer, associate service fellow, mining engineer, mechanical engineer and research engineer, respectively, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health (CDC-NIOSH), Pittsburgh Mining Research Division, Pittsburgh, PA, USA
| | - M R Shahan
- Research mining engineer, associate service fellow, mining engineer, mechanical engineer and research engineer, respectively, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health (CDC-NIOSH), Pittsburgh Mining Research Division, Pittsburgh, PA, USA
| | - T W Beck
- Research mining engineer, associate service fellow, mining engineer, mechanical engineer and research engineer, respectively, Centers for Disease Control and Prevention, National Institute for Occupational Safety and Health (CDC-NIOSH), Pittsburgh Mining Research Division, Pittsburgh, PA, USA
| |
Collapse
|
10
|
Beck TW, Organiscak JA, Pollock DE, Potts JD, Reed WR. Influence of continuous mining arrangements on respirable dust exposures. ACTA ACUST UNITED AC 2016; 340:1-10. [PMID: 28529441 DOI: 10.19150/trans.7321] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/06/2022]
Abstract
In underground continuous mining operations, ventilation, water sprays and machine-mounted flooded-bed scrubbers are the primary means of controlling respirable dust exposures at the working face. Changes in mining arrangements - such as face ventilation configuration, orientation of crosscuts mined in relation to the section ventilation and equipment operator positioning - can have impacts on the ability of dust controls to reduce occupational respirable dust exposures. This study reports and analyzes dust concentrations measured by the Pittsburgh Mining Research Division for remote-controlled continuous mining machine operators as well as haulage operators at 10 U.S. underground mines. The results of these respirable dust surveys show that continuous miner exposures varied little with depth of cut but are significantly higher with exhaust ventilation. Haulage operators experienced elevated concentrations with blowing face ventilation. Elevated dust concentrations were observed for both continuous miner operators and haulage operators when working in crosscuts driven into or counter to the section airflow. Individual cuts are highlighted to demonstrate instances of minimal and excessive dust exposures attributable to particular mining configurations. These findings form the basis for recommendations for lowering face worker respirable dust exposures.
Collapse
Affiliation(s)
- T W Beck
- General engineer, senior mining engineer, formerly general engineer , branch chief and lead mining engineer, respectively, Pittsburgh Mining Research Division, National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA , USA
| | - J A Organiscak
- General engineer, senior mining engineer, formerly general engineer , branch chief and lead mining engineer, respectively, Pittsburgh Mining Research Division, National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA , USA
| | - D E Pollock
- General engineer, senior mining engineer, formerly general engineer , branch chief and lead mining engineer, respectively, Pittsburgh Mining Research Division, National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA , USA
| | - J D Potts
- General engineer, senior mining engineer, formerly general engineer , branch chief and lead mining engineer, respectively, Pittsburgh Mining Research Division, National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA , USA
| | - W R Reed
- General engineer, senior mining engineer, formerly general engineer , branch chief and lead mining engineer, respectively, Pittsburgh Mining Research Division, National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA , USA
| |
Collapse
|
11
|
Cecala AB, Reed WR, Joy GJ, Westmoreland SC, O'Brien AD. Helmet-Cam: tool for assessing miners' respirable dust exposure. Min Eng 2013; 65:78-84. [PMID: 26380529 PMCID: PMC4570878] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Grants] [Subscribe] [Scholar Register] [Indexed: 06/05/2023]
Abstract
Video technology coupled with datalogging exposure monitors have been used to evaluate worker exposure to different types of contaminants. However, previous application of this technology used a stationary video camera to record the worker's activity while the worker wore some type of contaminant monitor. These techniques are not applicable to mobile workers in the mining industry because of their need to move around the operation while performing their duties. The Helmet-Cam is a recently developed exposure assessment tool that integrates a person-wearable video recorder with a datalogging dust monitor. These are worn by the miner in a backpack, safety belt or safety vest to identify areas or job tasks of elevated exposure. After a miner performs his or her job while wearing the unit, the video and dust exposure data files are downloaded to a computer and then merged together through a NIOSH-developed computer software program called Enhanced Video Analysis of Dust Exposure (EVADE). By providing synchronized playback of the merged video footage and dust exposure data, the EVADE software allows for the assessment and identification of key work areas and processes, as well as work tasks that significantly impact a worker's personal respirable dust exposure. The Helmet-Cam technology has been tested at a number of metal/nonmetal mining operations and has proven to be a valuable assessment tool. Mining companies wishing to use this technique can purchase a commercially available video camera and an instantaneous dust monitor to obtain the necessary data, and the NIOSH-developed EVADE software will be available for download at no cost on the NIOSH website.
Collapse
Affiliation(s)
- A B Cecala
- A.B. Cecala, W.R. Reed and G.J. Joy, members SME, are mining engineers and industrial hygienist at the National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA. S.C. Westmoreland is regional general manager at Unimin Corp., Gore, VA and A.D. O'Brien is vice president Safety and Health at Unimin Corp., Winchester, VA
| | - W R Reed
- A.B. Cecala, W.R. Reed and G.J. Joy, members SME, are mining engineers and industrial hygienist at the National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA. S.C. Westmoreland is regional general manager at Unimin Corp., Gore, VA and A.D. O'Brien is vice president Safety and Health at Unimin Corp., Winchester, VA
| | - G J Joy
- A.B. Cecala, W.R. Reed and G.J. Joy, members SME, are mining engineers and industrial hygienist at the National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA. S.C. Westmoreland is regional general manager at Unimin Corp., Gore, VA and A.D. O'Brien is vice president Safety and Health at Unimin Corp., Winchester, VA
| | - S C Westmoreland
- A.B. Cecala, W.R. Reed and G.J. Joy, members SME, are mining engineers and industrial hygienist at the National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA. S.C. Westmoreland is regional general manager at Unimin Corp., Gore, VA and A.D. O'Brien is vice president Safety and Health at Unimin Corp., Winchester, VA
| | - A D O'Brien
- A.B. Cecala, W.R. Reed and G.J. Joy, members SME, are mining engineers and industrial hygienist at the National Institute for Occupational Safety and Health (NIOSH), Pittsburgh, PA. S.C. Westmoreland is regional general manager at Unimin Corp., Gore, VA and A.D. O'Brien is vice president Safety and Health at Unimin Corp., Winchester, VA
| |
Collapse
|
12
|
Hubscher CH, Reed WR, Kaddumi EG, Armstrong JE, Johnson RD. Select spinal lesions reveal multiple ascending pathways in the rat conveying input from the male genitalia. J Physiol 2010; 588:1073-83. [PMID: 20142271 DOI: 10.1113/jphysiol.2009.186544] [Citation(s) in RCA: 16] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/28/2022] Open
Abstract
The specific white matter location of all the spinal pathways conveying penile input to the rostral medulla is not known. Our previous studies using rats demonstrated the loss of low but not high threshold penile inputs to medullary reticular formation (MRF) neurons after acute and chronic dorsal column (DC) lesions of the T8 spinal cord and loss of all penile inputs after lesioning the dorsal three-fifths of the cord. In the present study, select T8 lesions were made and terminal electrophysiological recordings were performed 45-60 days later in a limited portion of the nucleus reticularis gigantocellularis (Gi) and Gi pars alpha. Lesions included subtotal dorsal hemisections that spared only the lateral half of the dorsal portion of the lateral funiculus on one side, dorsal and over-dorsal hemisections, and subtotal transections that spared predominantly just the ventromedial white matter. Electrophysiological data for 448 single unit recordings obtained from 32 urethane-anaesthetized rats, when analysed in groups based upon histological lesion reconstructions, revealed (1) ascending bilateral projections in the dorsal, dorsolateral and ventrolateral white matter of the spinal cord conveying information from the male external genitalia to MRF, and (2) ascending bilateral projections in the ventrolateral white matter conveying information from the pelvic visceral organs (bladder, descending colon, urethra) to MRF. Multiple spinal pathways from the penis to the MRF may correspond to different functions, including those processing affective/pleasure/motivational, nociception, and mating-specific (such as for erection and ejaculation) inputs.
Collapse
Affiliation(s)
- C H Hubscher
- Department of Anatomical Sciences and Neurobiology, University of Louisville, Louisville, KY 40292, USA.
| | | | | | | | | |
Collapse
|
13
|
|
14
|
|
15
|
Abstract
A combination of computed tomography (CT) scan and retrograde urethrogram is routinely employed to simulate treatment portals prior to radiation therapy for prostate cancer. These procedures can be performed more efficiently with the use of a standard magnitude grid and a prepared urethrogram kit.
Collapse
Affiliation(s)
- E Duncan
- Department of Radiation Oncology, North Mississippi Medical Center, Tupelo 38801, USA
| | | |
Collapse
|
16
|
Reed WR, Beavers S, Reddy SK, Kern G. Chiropractic management of primary nocturnal enuresis. J Manipulative Physiol Ther 1994; 17:596-600. [PMID: 7884329] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/27/2023]
Abstract
OBJECTIVE To evaluate chiropractic management of primary nocturnal enuresis in children. DESIGN A controlled clinical trial for 10 wk preceded by and followed by a 2-wk nontreatment period. SETTING Chiropractic clinic of the Palmer Institute of Graduate Studies and Research. PARTICIPANTS Forty-six nocturnal enuretic children (31 treatment and 15 control group), from a group of 57 children initially included in the study, participated in the trial. INTERVENTION High velocity, short lever adjustments of the spine consistent with the Palmer Package Techniques; or a sham adjustment using an Activator at a nontension setting administered to the examiner's underlying contact point. Two 5th-year chiropractic students under the supervision of two clinic faculty performed the adjustments. MAIN OUTCOME MEASURES Frequency of wet nights. RESULTS The post-treatment mean wet night frequency of 7.6 nights/2 wk for the treatment group was significantly less than its baseline mean wet night frequency of 9.1 nights/2 wk (p = 0.05). For the control group, there was practically no change (12.1 to 12.2 nights/2 wk) in the mean wet night frequency from the baseline to the post-treatment. The mean pre- to post-treatment change in the wet night frequency for the treatment group compared with the control group did not reach statistical significance (p = 0.067). Twenty-five percent of the treatment-group children had 50% or more reduction in the wet night frequency from baseline to post-treatment while none among the control group had such reduction. CONCLUSIONS Results of the present study strongly suggest the effectiveness of chiropractic treatment for primary nocturnal enuresis. A larger study of longer duration with a 6-month follow-up is therefore warranted.
Collapse
Affiliation(s)
- W R Reed
- Palmer Institute of Graduate Studies and Research, Davenport, IA 52803
| | | | | | | |
Collapse
|
17
|
Abstract
The authors assess prevalence of anemia in a population of patients anticipating radiation therapy. They also characterize the anemia and determine its relationship to stage, inflammation, and mortality. Blood counts were recorded for 81 of 103 patients surveyed during August 1988. When available, iron studies were used to characterize anemia. Stage, treatment, and 3-year mortality were obtained from tumor registry data. Many patients had anemia of chronic disorders. Therefore, 16 adults with solid tumors anticipating radiation therapy were evaluated with complete blood counts, iron studies, chemistries, erythropoietin, and measures of inflammation. Of 81 patients, more than half were anemic. Thirteen of 17 patients with anemia and with iron studies had anemia of chronic disorders. Two-thirds of patients with anemia had advanced cancer, versus one third of patients without anemia. Twice as many patients with anemia compared with those without anemia died within 3 years. Of 16 patients studied intensively, 4 had anemia, advanced cancer, and died within 6 months, whereas all 12 patients without anemia lived longer. The 4 patients with anemia had an elevated iron index (7.95), erythrocyte sedimentation rate (86 mm per hour), and C-reactive protein (4.48 mg/dL) versus those of 12 patients without anemia and 10 volunteers. Erythropoietin levels were not different significantly among groups. Anemia indicated a poor prognosis during and before radiotherapy, and anemia of chronic disorders was associated with advanced cancer and a short survival rate.
Collapse
Affiliation(s)
- W R Reed
- Department of Radiology, University of Iowa Hospitals and Clinics, Iowa City 52242
| | | | | |
Collapse
|
18
|
Reed WR, DeGowin RL. Suppressive effects of pentoxifylline on natural killer cell activity. J Lab Clin Med 1992; 119:763-71. [PMID: 1593221] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [Affiliation(s)] [Abstract] [MESH Headings] [Grants] [Subscribe] [Scholar Register] [Indexed: 12/27/2022]
Abstract
The methylxanthine derivative pentoxifylline, widely used as a hemorrheologic agent in the treatment of peripheral vascular disease, is now being evaluated for potential applications in patients with cancer. Recent studies have shown that pentoxifylline can modulate a number of neutrophil functions at in vitro concentrations of at least 50 micrograms/ml. Using a standard51chromium-release assay, we studied the suppressive effects of pentoxifylline on natural killer (NK) cell activity and found that pentoxifylline, at concentrations of 50 and 100 micrograms/ml, suppressed the in vitro NK cell activity of healthy volunteers by 25% and 75%, respectively. Postreaction supernatants from chromium-release studies were then assayed for prostaglandin E2 (PGE2) and tumor necrosis factor-alpha (TNF-alpha) by using enzyme-linked immunosorbent assay. Concentrations of both PGE2 and TNF-alpha were increased by more than five times in those assay wells containing pentoxifylline. Moreover, the addition of 1 microgram/ml indomethacin to the NK assay system containing pentoxifylline, completely inhibited PGE2 production and abrogated the pentoxifylline-induced NK suppression. The addition of PGE2 (1 x 10(-6) mol/L) to the assay system suppressed NK activity, whereas addition of 1 or 10 ng/ml TNF-alpha did not. Theophylline, another methylxanthine, failed to suppress NK activity like pentoxifylline at equimolar concentrations. Our studies provide the first evidence that concentrations of pentoxifylline of at least 50 micrograms/ml suppressed NK cell function by inducing PGE2 synthesis from effector peripheral-blood mononuclear cells.
Collapse
Affiliation(s)
- W R Reed
- Department of Radiology, College of Medicine, University of Iowa, Iowa City
| | | |
Collapse
|
19
|
Abstract
This paper proposes and tests an alternative explanation of the marriage premium that relies upon differences in workers' tastes and compensating wage differentials. A key assumption is that marital status proxies for the consumption of family goods, such as children, and that these are costly. Workers whose greater demands for family goods are taste- generated and shown to choose jobs that offer greater wage, and less non-pecuniary compensation. This creates an observed wage premium that has nothing to do with differences in workers' productivities. Supporting empirical evidence for this hypothesis is presented, including a reevaluation of previous studies.
Collapse
|
20
|
Welik RA, Josselson J, Shen SY, Reed WR, Sadler JH. Repeated low-dose streptokinase infusions into occluded permanent, central-venous hemodialysis catheters. Kidney Int 1987; 31:1210-2. [PMID: 3599660 DOI: 10.1038/ki.1987.130] [Citation(s) in RCA: 7] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [What about the content of this article? (0)] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/06/2023]
|
21
|
Abstract
The genioglossus (GG) muscle activity of four infants with micrognathia and obstructive sleep apnea was recorded to assess the role of this tongue muscle in upper airway maintenance. Respiratory air flow, esophageal pressure, and intramuscular GG electromyograms (EMG) were recorded during wakefulness and sleep. Both tonic and phasic inspiratory GG-EMG activity was recorded in each of the infants. On occasion, no phasic GG activity could be recorded; these silent periods were unassociated with respiratory embarrassment. GG activity increased during sigh breaths. GG activity also increased when the infants spontaneously changed from oral to nasal breathing and, in two infants, with neck flexion associated with complete upper airway obstruction, suggesting that GG-EMG activity is influenced by sudden changes in upper airway resistance. During sleep, the GG-EMG activity significantly increased with 5% CO2 breathing (P less than or equal to 0.001). With nasal airway occlusion during sleep, the GG-EMG activity increased with the first occluded breath and progressively increased during the subsequent occluded breaths, indicating mechanoreceptor and suggesting chemoreceptor modulation. During nasal occlusion trials, there was a progressive increase in phasic inspiratory activity of the GG-EMG that was greater than that of the diaphragm activity (as reflected by esophageal pressure excursions). When pharyngeal airway closure occurred during a nasal occlusion trial, the negative pressure at which the pharyngeal airway closed (upper airway closing pressure) correlated with the GG-EMG activity at the time of closure, suggesting that the GG muscle contributes to maintaining pharyngeal airway patency in the micrognathic infant.
Collapse
|
22
|
Abstract
To study factors influencing patency and configuration of the upper airway, we studied 11 infant cadavers using endoscopy and photography. In most cases, studies were performed shortly after death. The naso-, oro-, and hypopharynx and the larynx were studied. The upper airway was sealed at the nose and mouth so that transmural airway pressure could be raised or lowered. As pressure was lowered airway closure was seen in each of the four regions studied. With respect to closing pressure, the oropharynx was the most compliant region and the larynx the least compliant. In the naso-, oro-, and hypopharynx, lowering the transmural pressure was associated with inward movement of the anterior, posterior, and lateral airway walls. In the larynx, closure occurred by vocal cord opposition in the midline. Tension applied to the genioglossus and geniohyoid tongue muscles had an effect opposite to that of airway suction, causing a more or less symmetrical dilation of the naso- and oropharynx. When the airway was closed, additional tension was needed to produce airway reopening, suggesting that adhesion forces act to maintain airway closure. Neck flexion caused pharyngeal closure, and neck extension caused pharyngeal dilation. Secretions adherent to the walls of the airway visibly narrowed its lumen. The relevance of these findings for the obstructive sleep apnea and laryngomalacia syndromes is discussed.
Collapse
|
23
|
Roberts JL, Reed WR, Mathew OP, Menon AA, Thach BT. Assessment of pharyngeal airway stability in normal and micrognathic infants. J Appl Physiol (1985) 1985; 58:290-9. [PMID: 3968018 DOI: 10.1152/jappl.1985.58.1.290] [Citation(s) in RCA: 49] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/08/2023] Open
Abstract
A current hypothesis for obstructive sleep apnea states that 1) negative airway pressure during inspiration can collapse the pharyngeal airway, and 2) neural control of pharyngeal airway-dilating muscles is important in preventing this collapse. To test this hypothesis we performed nasal mask occlusions to increase negative pharyngeal airway pressures during inspiration in eight normal and five micrognathic infants. Both groups developed midinspiratory pharyngeal obstruction, but obstruction was more frequent in micrognathic infants and varied in some infants with sleep state. The airway usually reopened with the subsequent expiration. The occasional failure to reopen was presumably due to pharyngeal wall adhesion. If airway obstruction occurred in sequential breaths during multiple-breath nasal mask occlusions in normal infants, there was a breath-by-breath change in the airway pressure associated with airway closure (airway closing pressure); the airway closing pressure became progressively more negative. Micrognathic infants showed less ability to improve the airway closing pressure, but this ability increased with age. These findings suggest that nasal mask occlusion can test the competence of the neuromuscular mechanisms that maintain pharyngeal airway patency in infants. Micrognathic infants had spontaneous midinspiratory pharyngeal airway obstructions during snoring. Their episodes of obstructive apnea began with midinspiratory pharyngeal obstruction similar to that seen during snoring and nasal mask occlusions. These findings imply a similar pathophysiology for snoring, spontaneous airway obstruction, and obstruction during snoring.
Collapse
|
24
|
Roberts JL, Reed WR, Thach BT. Pharyngeal airway-stabilizing function of sternohyoid and sternothyroid muscles in the rabbit. J Appl Physiol Respir Environ Exerc Physiol 1984; 57:1790-5. [PMID: 6511553 DOI: 10.1152/jappl.1984.57.6.1790] [Citation(s) in RCA: 53] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [What about the content of this article? (0)] [Abstract] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 01/20/2023]
Abstract
The upper airway is vulnerable to collapse from negative intraluminal pressures during inspiration. The tongue muscles, the genioglossi and geniohyoids, by contracting during inspiration, appear to function to resist this collapse. This study supports the hypothesis that two cervical strap muscles, the sternohyoid and sternothyroid, have a similar function. First, phasic inspiratory electromyographic activity was recorded from the sternohyoid and sternothyroid muscles of nine anesthetized rabbits during tidal breathing. Furthermore, each muscle showed a progressive increase in electromyographic activity with airway occlusion. Second, in eight rabbits, by determining the amount of negative pressure required to collapse the upper airway (airway closing pressure determination), it was shown that upper airway stability improved with electrical stimulation of either the paired sternohyoid or sternothyroid muscles. In addition, in 12 freshly killed rabbits, mechanical tension, mimicking the contraction of either the sternohyoid or sternothyroid, improved airway stability. Finally, observations of the pharyngeal lumen utilizing a fiber-optic endoscope, revealed concentric narrowing of the oro- and nasopharynx when airway pressure was lowered and concentric widening when tension was increased in the sternohyoid or sternothyroid muscles. These findings support the hypothesis that phasic inspiratory contraction of the sternohyoid and sternothyroid muscles functions to resist pharyngeal airway collapse due to negative intraluminal pressures.
Collapse
|
25
|
Reed WR. Visible light-curing composite resins. J Am Dent Assoc 1983; 107:144, 146. [PMID: 6578262 DOI: 10.14219/jada.archive.1983.0221] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [What about the content of this article? (0)] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/20/2023]
|