The Failure to Recognize Continuing Harm: Post-Separation Domestic Abuse in Child Contact Cases

This article presents findings from a case file review of post-separation parenting cases in England and Wales. It first outlines that jurisdiction's legal framework relevant to these cases, before providing an overview of the findings relating to the profile of the cases and their outcomes. It then describes the types of abuse most frequently encountered in these cases, and examines the attitude of the courts to post-separation abuse by looking at both interim and final court orders. The study finds that key legal provisions governing these cases are not being followed, with little understanding shown for the nature of post-separation abuse.

Effect of Quasi-One-Dimensional Properties on Source/Drain Contacts in Vertical Nanowire Field-Effect Transistors (VNWFETs)

In this study, we investigated the influence of quasi-one-dimensional (Quasi-1D) characteristics on the source and drain contact resistances within vertical nanowire (NW) field-effect transistors (FETs) of diminutive diameter. The top contact of the NW is segregated into two distinct regions: the first encompassing the upper surface, designated as the axial contact, and the second encircling the side surface, known as the radial contact, which is formed during the top-contact metal deposition process. Quantum confinement effects, prominent within Quasi-1D NWs, exert significant constraints on radial transport, consequently inducing a noticeable impact on contact resistance. Notably, in the radial direction, electron tunneling occurs only through quantized, discrete energy levels. Conversely, along the axial direction, electron tunneling freely traverses continuous energy levels. In a meticulous numerical analysis, these disparities in transport mechanisms unveiled that NWs with diameters below 30 nm exhibit a markedly higher radial contact resistance compared to their axial counterparts. Furthermore, an increase in the overlap length (less than 5 nm) contributes to a modest reduction in radial resistance; however, it remains consistently higher than the axial contact resistance.

Inverse dynamics, joint reaction forces and loading in the musculoskeletal system: guidelines for correct mechanical terms and recommendations for accurate reporting of results

Inverse Dynamics is routinely used in biomechanics for the estimation of loading in the musculoskeletal system but there are problems with the terms and definitions and even official recommendations introduce artificial and incorrect mechanical constructs to justify arbitrary and inappropriate terms. These terminology problems lead to further confusion and misinterpretations rather than to standardisation of mechanically correct nomenclature and accurate interpretation of joint loading. The perspective in this paper exposes some of the flawed foundational premises of these constructs and makes recommendations for accurate reporting of inverse dynamics outcomes and musculoskeletal loading. The inverse dynamics approach is based on free body diagrams that include the actual forces as applied ('Actual Forces' approach) or the replacement of actual forces with an equivalent resultant force and moment ('Resultant Moments' approach). Irrespective of the approach used to model the muscle and other forces, the inverse dynamics outputs always include the joint reaction forces representing the interactions with adjacent segments. The different terms suggested to distinguish the calculated joint reaction forces from the two approaches such as 'net joint force', 'resultant force', 'intersegmental force' and 'bone-on-bone force' are inappropriate, misleading and confusing. It is recommended to refer to joint reaction forces as Total or Partial when using an Actual Forces or a Resultant Moments approach, respectively.

Quantifying Offense and Defense Workloads in Professional Rugby Union

PURPOSE

Rugby union is a contact team sport demanding high levels of physical capacity, and understanding the match workloads can be useful to inform training. In this study, the factors influencing locomotion and contact workloads for offensive and defensive ball-in-play periods are quantified.

METHODS

Locomotion and contact metrics were collected from global positioning system units and videos for 31 professional players of a Super Rugby team across 14 games in the 2021 season. Data were analyzed with a generalized mixed-model procedure that included effects for type of play, playing position, match outcome, and ball-in-play time. Magnitudes were assessed with standardization, and evidence for substantial magnitudes was derived from sampling uncertainty.

RESULTS

When offense was compared to defense, most metrics showed decisively substantial increases (small to moderate) for forwards and backs. There was decisive evidence that locomotion metrics were substantially lower (large differences) and contact metrics were higher (very large differences) when comparing forwards to backs on offense and defense. When winning was compared to losing, there was good evidence that forwards experienced small increases in overall workload on defense, and backs experienced a small increase in high-speed running and a moderate decrease in contacts on offense. Match-to-match changes associated with ball-in-play time, attributed to fatigue, were decisive (moderate to very large) across most metrics for forwards and backs in offense and defense.

CONCLUSIONS

The increased locomotion and contact workloads in offensive periods and the differing physical requirements between positions and match outcomes for both types of play are novel findings that should aid practitioners in designing effective training.

The effect of autism phenotype and diagnosis disclosure on students' desire for social distance from autistic peers

LAY ABSTRACT

Autistic students experience loneliness, rejection from peers, which might negatively affect both their well-being, as well as academic results. Others have studied this topic, however, the existing research does not analyze the desire for social distance from autistic female students in higher education. The goal of this study was to evaluate whether the way autism is expressed and disclosing the autism diagnosis had an effect on students' willingness to interact with autistic male and female students. We also analyzed participants' knowledge about autism, contact with autistic people in the past and its pleasantness in relation to their willingness to interact with autistic students described in the scenarios of the present study. We found that students were less willing to interact with autistic male students compared to autistic female students, as well as with autistic students whose diagnosis was not disclosed compared to autistic students whose diagnosis was disclosed to the raters. In addition, students who reported more pleasant contact with autistic individuals in the past were more willing to socially interact with autistic students if their diagnosis was disclosed. Students with higher knowledge of autism expressed greater willingness to interact with autistic males and autistic students regardless of diagnosis disclosure. Findings suggest that autistic males and individuals who prefer not to disclose their diagnosis are more vulnerable to social exclusion. More subtle expressions of autism need to be researched further.

Diagnostic accuracy of patch testing based in clinical response to contact allergen restrictions in allergic contact dermatitis

Summary

Background. Patch testing (PT) is used to identify substances that cause allergic contact dermatitis (ACD). However, the clinical effects of allergen restrictions following PT have not been thoroughly investigated. This study aims to assess the diagnostic accuracy of PT in patients suspected of having ACD. Methods. Prospective study. PT were performed in patients with clinical diagnosis of ACD. Patients with a positive PT (case group) had a strict restriction of the suspected substance for one month. In patients with negative patch testing (control group), allergen restriction was based in clinical history. Clinical reduction (CR) of at least 50% in disease activity (CR50%) after one month of allergen restriction was considered clinically relevant. Total control was defined as clinical reduction of at least 90% (CR90%). Results. From 400 patients, 66.2% had a positive PT. The sensitivity of PT to identify CR50% was 84%, specificity 47%, PPV 53%, and NPV 81%. Only 10.5% of patients achieved CR90%. Conclusions. The PT had moderate diagnostic accuracy. It could be useful as a screening, but a positive result should be confirmed with controlled allergen restriction. The low number of patients who achieved a 90% CR invites to reconsider the allergens included in PT and the mechanistic processes of the disease.

Making "Fast Friends" Online in Middle Childhood and Early Adolescence

Close peer relationships are critical to children's and adolescents' healthy development and well-being, yet youth sometimes struggle to make friends. The present work tested whether an online version of the Fast Friends procedure could engender closeness among 9- to 13-year-old youth. Participant dyads (N = 131), matched in age and gender, were randomly assigned to answer personal questions that encourage self-disclosure and play a collaborative game (Fast Friends condition) or to engage in similar activities without self-disclosure or collaboration (control condition). Fast Friends dyads reported feeling closer and expressed more interest in future contact than control dyads. The discussion addresses potential future uses and implications of an online Fast Friends procedure.

Biomechanical Characterization of Preparation for Airs above the Ground: A Mixed Approach

Equitation in the French tradition is a school of riding that emphasizes harmonious relations between humans and horses. The best-known community is the Cadre Noir of Saumur, whose specialty is the air above the ground (AAG). No study has yet looked at the horse-rider interaction in this specific context. The purpose of this study was to identify and quantify indicators of AAGs based on the empirical perception of the écuyers expressed by a method of self-confrontation interviews. Fourteen training sessions were the subject of phenomenological and biomechanical approaches. Contact, balance, and hoof-beat, decisive for performance quality, were characterized for 49 AAGs, performed by five horses trained by two expert écuyers, with rein tension meters integrated in their double bridle (curb and snaffle reins) and six inertial measurement units fixed on the limbs, sternum, and croup. Their action was characterized by a peak of 65 ± 39 N on the inside curb rein. They considered that their horse was in balance (forehand inclined 13 ± 7° and -12 ± 9° for the hind hand). After the peak, during the 3.3 ± 2 s the horse's trunk was stable and the écuyers released the contact until the AAG was perceived as satisfactory by the écuyer. The mixed approach allowed a pattern of action to be envisaged for the écuyer based on contact, balance, and hoof-beat in the execution of AAGs. The quantification of rein tension, trunk movements, and acceleration of the four limbs objectified the expert écuyers' feeling of developing aptitudes for their actions in the human-horse interactions for improved transmission to young écuyers. The mixed approach used in this study has given rise to new training methods that are transferable to other equestrian activities.

Effects of Positive versus Negative Framing on Stigma toward Individuals Recovering from Methamphetamine Use Disorder during Randomized Brief Video Exposure

Eighty-two Australians (mean age = 30.07; 61% female) were blindly randomized to view either a video edited to depict a positive or negative presentation of individuals in recovery from methamphetamine use disorder. Participants completed the Social Distance Scale for Substance Users, Dangerousness Scale for Substance Users and Affect Scale for Substance Users before and after video exposure. Following video exposure, those exposed to the positive video portrayal reported lower desire for social distance (p < .001), lower perceptions of dangerousness (p = .011), and more favorable affective reactions (p < .001). Participants' previous level of contact with the target group did not predict baseline stigma or moderate the experimental effect. Participants' qualitative responses to the experiment were assessed via content analysis and indicated mainly positive or ambivalent attitudes, unchanged by the video; however, 18% of those receiving the positive video reported attitudes becoming more sympathetic/favorable. Findings suggest that media depictions which include people with methamphetamine use disorder displaying friendliness and recovery narratives may improve community perceptions of people recovering from methamphetamine use disorder, and conversely, unsmiling portrayals focusing on harm done to others increases desire for social distance and perceived dangerousness.

Extended families? Contact expectations and experiences of egg donors donating to previously unknown recipients

In New Zealand egg donation is identity-release, and donors may be known to recipients, e.g. family members/friends, or previously unknown e.g. clinic-recruited or sourced through advertising. In the case of unknown donors, New Zealand practice allows donors and recipients to meet face-to-face prior to donation in a joint counselling meeting. While contact details may not necessarily be exchanged in counselling, information-exchange and contact expectations are usually addressed. In previous papers, we explored donors' motivations and experiences of donation. In this paper, we explore donors' ideas around their role in relation to the donor-conceived person (DCP) and their expectations and experiences of information-exchange and contact. While donors did not see themselves as parents and were aware of appropriate boundaries, they described a sense of ongoing connection to DCP, often framing this in extended family terms. They desired to be kept informed about DCP, considered themselves 'on standby' for information requests or in-person contact and valued the opportunity for connection between their children and DCP. Donors were, however, cognisant of the limits to their ability to ensure information-exchange and contact and sometimes struggled with their perceived disempowered position. Meeting prior to donation may both clarify and reinforce expectations of information-exchange and contact.

Environmental force sensing helps robots traverse cluttered large obstacles

Robots can traverse sparse obstacles by sensing environmental geometry and avoiding contact with obstacles. However, for search and rescue in rubble, environmental monitoring through dense vegetation, and planetary exploration over Martian and lunar rocks, robots must traverse cluttered obstacles as large as themselves by physically interacting with them. Previous work discovered that the forest floor-dwelling discoid cockroach and a sensor-less minimalistic robot can traverse cluttered grass-like beam obstacles of various stiffness by transitioning across different locomotor modes. Yet the animal was better at traversal than the sensor-less robot, likely by sensing forces during obstacle interaction to control its locomotor transitions. Inspired by this, here we demonstrated in simulation that environmental force sensing helps robots traverse cluttered large obstacles. First, we developed a multi-body dynamics simulation and a physics model of the minimalistic robot interacting with beams to estimate beam stiffness from the sensed contact forces. Then, we developed a force feedback strategy for the robot to use the sensed beam stiffness to choose the locomotor mode with a lower mechanical energy cost. With feedforward pushing, the robot was stuck in front of stiff beams if it has a limited force capacity; without force limit, it traversed but suffered a high energy cost. Using obstacle avoidance, the robot traversed beams by avoiding beam contact regardless of beam stiffness, resulting in a high energy cost for flimsy beams. With force feedback, the robot determined beam stiffness, then traversed flimsy beams by pushing them over and stiff beams by rolling through the gap between them with a low energy cost. Stiffness estimation based on force sensing was accurate across varied body oscillation amplitude and frequency and position sensing uncertainty. Mechanical energy cost of traversal increased with sensorimotor delay. Future work should demonstrate cluttered large obstacle traversal using force feedback in a physical robot.

A sampling technique for worldwide comparisons of language contact scenarios

Existing sampling methods in language typology strive to control for areal biases in typological datasets as a means to avoid contact effects in the distribution of linguistic structure. However, none of these methods provide ways to directly compare contact scenarios from a typological perspective. This paper addresses this gap by introducing a sampling procedure for worldwide comparisons of language contact scenarios. The sampling unit consists of sets of three languages. The Focus Language is the language whose structures we examine in search for contact effects; the Neighbor Language is genealogically unrelated to the Focus Language, and counts as the potential source of contact influence on the Focus Language; the Benchmark Language is a relative of the Focus Language neither in contact with the Focus nor with the Neighbor language, and is used for disentangling contact effects from genealogical inheritance in the Focus Language. Through this design, we compiled a sample of 49 three-language sets (147 languages in total), which we present here. By switching the focus of typological sampling from individual languages to contact relations between languages, our method has the potential of uncovering patterns in the diffusion of language structures, and how they vary and change.

Influence of Wettability and Geometry on Contact Electrification between Nonionic Insulators

Contact electrification is an interfacial process in which two surfaces exchange electrical charges when they are in contact with one another. Consequently, the surfaces may gain opposite polarity, inducing an electrostatic attraction. Therefore, this principle can be exploited to generate electricity, which has been precisely done in triboelectric nanogenerators (TENGs) over the last decades. The details of the underlying mechanisms are still ill-understood, especially the influence of relative humidity (RH). Using the colloidal probe technique, we convincingly show that water plays an important role in the charge exchange process when two distinct insulators with different wettability are contacted and separated in <1 s at ambient conditions. The charging process is faster, and more charge is acquired with increasing relative humidity, also beyond RH = 40% (at which TENGs have their maximum power generation), due to the geometrical asymmetry (curved colloid surface vs planar substrate) introduced in the system. In addition, the charging time constant is determined, which is found to decrease with increasing relative humidity. Altogether, the current study adds to our understanding of how humidity levels affect the charging process between two solid surfaces, which is even enhanced up to RH = 90% as long as the curved surface is hydrophilic, paving the way for designing novel and more efficient TENGs, eco-energy harvesting devices which utilize water and solid charge interaction mechanism, self-powered sensors, and tribotronics.

The Study Influence Analysis of the Mathematical Model Choice for Describing Polymer Behavior

The article considered the three types of description of the material behavior model: elastic, elastic-plastic, and viscoelastic. The problem is considered in the framework of deformable solid mechanics. The paper considers the possibility of describing modern polymeric and composite materials used as antifriction sliding layers in the viscoelasticity framework. A numerical procedure for finding the coefficients to describe the viscoelastic material behavior using the Prony model has been implemented. Numerical results and experimental data are compared. The model problem of spherical indenter penetration into polymer half-space is realized. The influence of the system discretization on the numerical solution is analyzed. The influence of the polymer behavior description in static and dynamic problem formulations is analyzed.

Cutaneous mastocytoma obscured by allergic contact dermatitis in an infant

The diagnosis of solitary mastocytoma is usually made clinically, however, atypical presentations may obscure the diagnosis. We present a unique case of solitary cutaneous mastocytoma in an 11-month-old male initially misdiagnosed as atopic dermatitis; the diagnosis was obscured due to the development of an allergic contact dermatitis most likely secondary to topical medications that were being applied to the lesion. The diagnosis of solitary cutaneous mastocytoma is made based on lesion morphology, Darier's sign, and lack of systemic involvement. Most solitary cutaneous mastocytomas resolve before puberty; symptomatic treatment and avoidance of triggers are mainstay therapy.

Household Contact Tuberculosis Screening Adherence and Associated Factors Among Pulmonary Tuberculosis Patients on Follow-Up at Health Facilities in Shashamane Town, Southeast Ethiopia

Background

The greatest risk of getting tuberculosis (TB) infection is contact with patients who have pulmonary tuberculosis (PTB). The World Health Organization (WHO) strongly recommends tuberculosis screening for all household contacts of PTB patients. However, there is no information on household contact screening adherence among PTB patients in Shashamane town.

Methods

A facility-based mixed-method cross-sectional study was conducted from July 1 to November 30, 2021 among consecutively selected 392 PTB patients and 23 purposely selected key informants. Data were collected using a pre-tested interviewer administered questionnaire and leading questions. Data analysis was made using SPSS version 25 and in-depth interview information was analyzed based on thematic areas. Bivariable followed by multivariable logistic regression with 95% CI were conducted. P-value<0.05 was considered to identify statistically significant factors.

Results

The overall adherence to household contact screening (HHCS) was 44.4% (95% CI: 39.3, 49.1). Having under fifteen years of contact (AOR=2.386, 95% CI: 1.44, 3.96), diploma and above education status (AOR=3.43, 95% CI: 1.286, 9.15), good knowledge (AOR=2.999, 95% CI: 1.79, 5.03), favorable attitude (AOR=2.409, 95% CI: 1.45, 4.02), getting health education (AOR=3.287, 95% CI: 1.92, 5.63) and smear positive type of PTB (AOR=2.156, 95% CI: 1.28, 3.62) were factors significantly associated with HHCS adherence. Workload, facility readiness and care provide commitments were also identified from qualitative data.

Conclusion and Recommendation

HHCS adherence in our study was sub-optimal referenced to WHO and national recommendations that all household contact should be screened. Having age less than fifteen years contact, education status, knowledge, attitude, receiving health education and type of pulmonary tuberculosis were factors associated with adherence. We recommend increasing community awareness of TB, providing health education TB patients and their families, strengthening positive attitudes toward HHC screening and strengthening the commitment of health professionals to screen for HHCs.

Effects of metallic electrodes on the thermoelectric properties of zigzag graphene nanoribbons with periodic vacancies

We theoretically analyze the thermoelectric properties of graphene quantum dot arrays (GQDAs) with line- or surface-contacted metal electrodes. Such GQDAs are realized as zigzag graphene nanoribbons (ZGNRs) with periodic vacancies. Gaps and minibands are formed in these GQDAs, which can have metallic and semiconducting phases. The electronic states of the first conduction (valence) miniband with nonlinear dispersion may have long coherent lengths along the zigzag edge direction. With line-contacted metal electrodes, the GQDAs have the characteristics of serially coupled quantum dots (SCQDs) if the armchair edge atoms of the ZGNRs are coupled to the electrodes. By contrast, the GQDAs have the characteristics of parallel quantum dots if the zigzag edge atoms are coupled to the electrodes. The maximum thermoelectric power factors of SCQDs with line-contacted electrodes of Cu, Au, Pt, Pd, or Ti at room temperature were similar or greater than 0.186 nW K^-1; their figures of merit were greater than three. GQDAs with line-contacted metal electrodes have much better thermoelectric performance than surface contacted metal electrodes.

Treatment Results of Vocal Process Granuloma: Intubation versus Contact Granuloma

Introduction  Contact granulomas (CGs) and intubation granulomas (IGs) are known to have different clinical manifestations despite having the same pathological features. Objective  The purpose of the present study was to analyze the treatment results for CG and IG and to obtain clinical information. Methods  We retrospectively reviewed the medical records of patients diagnosed with vocal process granuloma (VPG) between January 2015 and December 2018. The patient's age, sex, medical history, lesion size, lesion type, reflux finding score (RFS), response to treatment, duration of treatment, and follow-up period were compared. Results  Eighteen patients with CG and 14 patients with IG were included in the study. The IG group had more female patients ( p  = 0.0009), showed better response to proton pump inhibitor (PPI) and steroid inhalation (SI) ( p  = 0.036), and had a shorter treatment period ( p  = 0.0029) than the CG group. Five patients who received botulinum toxin injections in their vocal cords had complete remission. Conclusion  Compared with CG, IG was more responsive to treatment with PPI and SI and required a shorter duration of treatment.

Gender Differences in Anticipated but Not Behavioral Confrontation of Heterosexist Comments

Heterosexist comments are prevalent, but they can be combatted by recognizing and confronting them. Using a 2 (participant gender: woman, man) by 2 (heterosexist comment: gender-policing, sexuality-based) design, we evaluated gender differences in ratings of offensiveness and confrontations of heterosexist comments. In Study 1 (N = 110), participants imagined interacting with a person who made a heterosexist comment. In Study 2 (N = 86), participants interacted in-person with a confederate who made a heterosexist comment. In both studies, non-target (heterosexual) women rated the comments as more offensive as compared to non-target men. Notably, women anticipated confronting with more strength than men (Study 1), but in actuality confronted with similar strength as men (Study 2). We explored perceived perpetrator sexism, beliefs about appearing gay, and prior contact with sexual minorities as potential variables impacting gender differences and predicting confronting. Differences between anticipated and actual confronting are discussed.

'Do we know if we need to reduce head impact exposure?': A mixed-methods study highlighting the varied understanding of the long-term risk and consequence of head impact exposure across all stakeholders at the highest level of rugby union

Background

One strategy to prevent and manage concussion is to reduce head impacts, both those resulting in concussion and those that do not. Because objective data on the frequency and intensity of head impacts in rugby union (rugby) are sparse, stakeholders resort to individual perceptions to guide contact training. It is unknown whether there is a level of contact training that is protective in preparing elite players for contact during matches.

Objectives

This study aimed to describe how contact training is managed in elite male rugby, and how staff and players perceive contact training load and head impact load.

Methods

This was a sequential explanatory mixed-methods study. Forty-four directors of rugby, defence coaches, medical and strength/conditioning staff and 23 players across all 13 English Premiership Rugby Union clubs and the National senior team participated in semi-structured focus groups and completed two bespoke questionnaires.

Results

The study identified the varied understanding of what constitutes head impact exposure across all stakeholder groups, resulting in different interpretations and a range of management strategies. The findings suggest that elite clubs conduct low levels of contact training; however, participants believe that some exposure is required to prepare players and that efforts to reduce head impact exposure must allow for individualised contact training prescription.

Conclusion

There is a need for objective data, possibly from instrumented mouthguards to identify activities with a high risk for head impact and possible unintended consequences of reduced exposure to these activities. As data on head impact exposure develop, this must be accompanied with knowledge exchange within the rugby community.

The energy release rate for non-penetrating crack in poroelastic body by fluid-driven fracture

A new class of constrained variational problems, which describe fluid-driven cracks (that are pressurized fractures created by pumping fracturing fluids), is considered within the nonlinear theory of coupled poroelastic models stated in the incremental form. The two-phase medium is constituted by solid particles and fluid-saturated pores; it contains a crack subjected to non-penetration condition between the opposite crack faces. The inequality-constrained optimization is expressed as a saddle-point problem with respect to the unknown solid phase displacement, pore pressure, and contact force. Applying the Lagrange multiplier approach and the Delfour-Zolésio theorem, the shape derivative for the corresponding Lagrangian function is derived using rigorous asymptotic methods. The resulting formula describes the energy release rate under irreversible crack perturbations, which is useful for application of the Griffith criterion of quasi-static fracture.

T-scans in implant procedures

T scans are a breakthrough in technology which allows the user to accurately analyze the occlusion of a patient with minimal to zero errors. They are used during prosthodontic rehabilitation to map out the patient's occlusion to plan for replacements. Such a high advancement in technology has a backdraw. The cost of the equipment is a concern for simple dental practitioners. There are no large scale studies using T scans in determining the occlusion. Therefore, it is of interest to analyze the use of T scans in determining the percentage of contact in patients with dental implants. This retrospective analysis was done at the Saveetha University hospital set up where patients undergoing prosthesis fabrication for implants were included. Details like their age, gender and the percentage of contact of the implant and percentage of contact on the adjacent tooth were recorded. These details were tabulated and imported to IBM SPSS version 23 for statistical analysis. Chi square test was used to analyze comparable variables. 22 patients were analyzed, the mean percentage of contact of implants was found to be 7.45±;9.01 and the mean percentage of contact of adjacent teeth was found to be 10.14±6.7. Thus, T scan is an efficient method in recording the dynamic occlusal contacts of a patient. The use of T scan reveals data pertaining to individual tooth but in the present study there is no statistical significance in terms of exact values comparing implant contact to adjacent tooth contact. Further studies are needed with relation to timing and contact surface of implant prosthesis.

Evolution of Statistical Strength during the Contact of Amorphous Polymer Specimens below the Glass Transition Temperature: Influence of Chain Length

A comprehensive study of the statistical distribution of the auto-adhesion lap-shear strength (σ) of amorphous polymer-polymer interfaces using various types of statistical tests and models is a useful approach aimed at a better understanding of the mechanisms of the self-healing interface. In the present work, this approach has been applied, for the first time, to a temperature (T) range below the bulk glass transition temperature (T_g^bulk). The interest of this T range consists in a very limited or even frozen translational segmental motion giving little or no chance for adhesion to occur. To clarify this issue, the two identical samples of entangled amorphous polystyrene (PS) with a molecular weight (M) of 10⁵ g/mol or 10⁶ g/mol were kept in contact at T = T_g^bulk - 33 °C for one day. The as-self-bonded PS-PS auto-adhesive joints (AJ) of PSs differing in M by an order of magnitude were fractured at ambient temperature, and their σ distributions were analyzed using the Weibull model, the quantile-quantile plots, the normality tests, and the Gaussian distribution. It has been shown that the Weibull model most correctly describes the σ statistical distributions of the two self-bonded PS-PS AJs with different M due to the joints' brittleness. The values of the Weibull modulus (a statistical parameter) m = 2.40 and 1.89 calculated for PSs with M = 10⁵ and 10⁶ g/mol, respectively, were rather close, indicating that the chain length has a minor effect on the σ data scatter. The Gaussian distribution has been found to be less appropriate for this purpose, though all the normality tests performed have predicted the correctness of the normal distribution for these PS-PS interfaces.

E-Syt1 Regulates Neuronal Activity-Dependent Endoplasmic Reticulum-Plasma Membrane Junctions and Surface Expression of AMPA Receptors

Endoplasmic reticulum (ER)-plasma membrane (PM) contact sites/junctions play important roles in cell physiology including signal transduction, ion and lipid transfer, and membrane dynamics. However, little is known about the dynamic regulation and functional roles of ER-PM junctions in neurons. Using a split green fluorescent protein-based membrane contact probe, we find that the density of ER-PM contact sites changes dynamically in the dendrites of hippocampal neurons undergoing long-term synaptic potentiation (LTP). We show that the Ca2±-sensing membrane tethering protein Extended Synaptotagmin 1 (E-Syt1) mediates the formation of ER-PM contact sites during LTP. We also show that E-Syt1 is required for neuronal activity-dependent surface expression of the α-amino-3-hydroxy-5-methyl-4-isoxazole propionic acid-type glutamate receptors. These findings implicate ER-PM junctions in the regulation of neurotransmitter receptor trafficking and synaptic plasticity.

Erythroid Differentiation Dependent Interaction of VPS13A with XK at the Plasma Membrane of K562 Cells

Mutations of the bridge-like lipid transport protein VPS13A and the lipid scramblase XK result in Chorea Acanthocytosis (ChAc) and McLeod syndrome (MLS), respectively, two similar conditions involving neurodegeneration and deformed erythrocytes (acanthocytes). VPS13A binds XK, suggesting a model in which VPS13A forms a lipid transport bridge between the endoplasmic reticulum (ER) and the plasma membrane (PM), where XK resides. However, studies of VPS13A in HeLa and COS7 cells showed that this protein localizes primarily at contacts of the ER with mitochondria. Overexpression of XK in these cells redistributed VPS13A to the biosynthetic XK pool in the ER but not to PM-localized XK. Colocalization of VPS13A with XK at the PM was only observed if overexpressed XK harbored mutations that disengaged its VPS13A-binding site from an intramolecular interaction. As the acanthocytosis phenotype of ChAc and MLS suggests a role of the two proteins in cells of the erythroid lineage, we explored their localization in K562 cells, which differentiate into erythroblasts upon hemin addition. When tagged VPS13A was overexpressed in hemin-treated K562 cells, robust formation of ER-PM contacts positive for VPS13A was observed and their formation was abolished in XK KO cells. ER-PM contacts positive for VPS13A were seldom observed in undifferentiated K562 cells, despite the presence of XK in these cells at concentrations similar to those observed after differentiation. These findings reveal that the interaction of VPS13A with XK at ER-PM contacts requires a permissive state which depends upon cell type and/or functional state of the cell.

Contact and Tribological Study of Micro/Nano Groove Texture on the Surface of Gas Bearing Materials Based on Nanoscale

As a kind of sliding bearing, the gas bearing is widely used in high-speed rotating machinery. It realizes energy cleaning in the field of high-speed rotating machinery. In order to solve the problem of reducing the service life of gas bearings due to friction during startup and shutdown, we use micromachining technology to process groove textures with different groove widths on the surface of 0Cr17Ni7Al, a common material for gas bearings. A ball-disc friction contrast test is conducted under dry friction conditions with and without texture. The experiment shows that the lowest average friction coefficient of 0.8 mm texture is σ = 0.745. When the friction radius is 22.5 mm, the wear rate of 1.0 mm texture is the lowest at ω = 3.118 × 10-4mm3/N·mm. However, the maximum friction coefficient reached is σ = 0.898. Under the nanometer scale, the contact between friction pairs is fully analyzed. The influence mechanism of different groove widths, friction impacts and climbing heights on the friction and wear properties of the micromechanical groove texture on the surface of 0Cr17Ni7Al stainless steel is studied at the nano-fractal scale. The effects of different width grooves on the surface texture and tribological properties of the micromachine are studied.

Affiliate stigma of mental illness in family caregivers of persons with mental illness in Hong Kong

BACKGROUND

Affiliate stigma of family caregivers may severely influence family caregiving, early treatment, and recovery of people with mental illness (PMI), and it may be impacted by the knowledge of mental illness and contact with PMI. However, little is known about the correlation between affiliate stigma of family caregivers of PMI and contact in Hong Kong.

AIMS

This study aimed to investigate affiliate stigma and its influencing factors among family caregivers of PMI in Hong Kong.

METHODS

A total of 106 family caregivers in Hong Kong participated in the study. The measurements included affiliate stigma, contacts (quantity, quality, and level), knowledge, prejudice, and discriminatory behaviors. Multiple regression analyses were employed.

RESULTS

The mean score of affiliate stigma scale (ASS) in family caregivers was 2.17 (SD = 0.65). In regression analyses, the results showed that contact quantity and contact level were significantly associated with higher affiliate stigma and its cognitive domain, while contact quality (e.g. positive contact) were significantly associated with lower affiliate stigma and its all domains among family caregivers. The positive relationship between prejudicial attitudes and affiliate stigma was also found.

CONCLUSIONS

Affiliate stigma is severe among family caregivers of PMI in Hong Kong. The results of this study indicate that contact, especially positive contact, contributes to reducing affiliate stigma among family caregivers of PMI. The results of this study are important for development of health policy on reducing stigma in family caregivers of PMI. The effectiveness of Enhancing Contact Model (ECM) should be examined in future anti-stigma interventions.

Friction Behavior of Rough Surfaces on the Basis of Contact Mechanics: A Review and Prospects

Contact and friction are closely related as friction cannot happen without contact. They are widely used in mechanical engineering, traffic, and other fields. The real contact surface is not completely smooth, but it is made up of a series of tiny contact asperities as viewed in the micro-scale. This is just the complexity of the contact and friction behaviors of rough surfaces: the overall mechanical behavior is the result of all asperities which are involved during the contact. Due to the multiplicity of surface topography, the complexity of contact scale, and the nonlinearity of the constitutive material, there are still many open topics in the research of contact and friction behavior of rough surfaces. Based on the perspective of the macroscopic and micro-nano scale contact mechanics, this review gives a brief overview of friction for the latest developments and points out the existing issues and opportunities for future studies.

Numerical Study of the Mechanical Behaviour of Wedge-Shaped Defect Filling Materials

This paper deals with direct restorations of teeth with non-carious cervical lesions (NCCL). NCCL defects are capable of gradual growth and are accompanied by the degradation of the surrounding tissue. Direct restorative treatment, in which the cavity is filled with a cementing agent, is considered to be an accessible and common treatment option. The study included simulations of the teeth without lesions, the teeth with V and U lesions and the tooth-restorative system. Parameterised numerical tooth models were constructed. Two cases with defect depths of 0.8 mm and ~1.7 mm and three variants with fillet radii of the defect end of 0.1, 0.2 and 0.3 mm were considered. The effect of two biomaterials for restorations was studied, namely Herculite XRV (Kerr Corp, Orange, CA, USA) and Charisma (Heraeus Kulzer GmbH, Hanau, Germany). The models were deformed with a vertical load of 100 to 1000 N from the antagonist tooth. The tooth-restorative system was considered, taking into consideration the contact interaction in the interface areas with the tooth tissues. Within the limits of the research, the character of the distribution of the deformation characteristics and their dependence on the level of loading, the depth of the defect and the radius of the curvature of the "wedge" were established.

Measurement of Slips at Contact Interfaces Using a Self-Powered Sensor Based on Triboelectric Nanogenerators

The accumulation of tangential small slips at contact interfaces may occur in mechanical assemblies when subjected to cyclic loadings, and cause failure of parts. However, the slip is difficult to measure directly. In this paper, a self-powered displacement sensor based on triboelectric nanogenerator (TENG) is fabricated, which is used to measure the microslip of the specimen in the designed test bench. When the specimen slips under the cyclic tangential load with a frequency of 10 Hz, the resulted average slip displacement of the specimen under a single load cycle is 9.01 μm, which is measured by the Keithley DAQ 6510 multimeter (Tektronix, Shanghai, China). This value is close to that measured by the Keithley 6514 electrometer. In addition, adding a BaTiO3 thin film with a thickness of 100 nm between the Kapton triboelectric layer and the Cu electrode, the output voltage of the sensor is increased by 51.5%. Thus, the sensitivity of the self-powered sensor is improved effectively.

Chlamydia trachomatis Infection and Seropositivity in Women Reporting Sexual Contact to a Chlamydia-Infected Partner

ABSTRACT

Among 73 women presenting to a sexually transmitted infection (STI) clinic in Birmingham, Alabama for reported sexual contact to a chlamydia-infected partner, Chlamydia trachomatis was detected in genital specimens in 24 (32.8%), less often in women reporting prior chlamydial infection ( P = 0.001). Most women (93.2%) were C. trachomatis seropositive.

Predicting Body-Esteem Based on Type of Sexual Victimization Experience

Almost no research exists examining the relationship between body-esteem and sexual victimization experience in adulthood. The current study contributes to the literature by examining body-esteem based on type of sexual victimization experience (i.e., none, sexual contact, attempted sexual coercion, sexual coercion, attempted rape, rape). Participants included undergraduate women (n = 750) who completed the Body-Esteem Scale (Franzoi & Shields, 1984) and the Sexual Experiences Survey-Short Form Victimization (Koss et al., 2007), and had either no history of sexual victimization experience or experience within the past year. Women with no sexual victimization experience did not differ from women with sexual contact experience, but both groups reported higher body-esteem than women with coercion, attempted coercion, and rape experience. These three latter groups did not differ from one another, but each reported lower body-esteem than women with attempted rape experience, who reported higher body-esteem than those with no experience. Findings are preliminary but suggest that body-esteem may be negatively associated with some types of sexual victimization experience (attempted and completed coercion, rape), but not others (sexual contact, attempted rape), and escaping rape may increase positive feelings toward one's body.

Festering: Mini-moments

Moment-to-moment dialogue between analyst and patient opens themes relating to psychic depths, inhibitions, and support for a need to grow. The therapy partners grow together as they engage psychic contact and explore elements that previously forced the patient to be hospitalized. A result is appreciation for ways contact with the depths can aid more playful, caring, and resourceful ways of being together and working with oneself.

Action research with caseworkers: Responding to and reflecting on the impacts of COVID-19 on birth family contact

Social distancing due to COVID-19 forced changes to contact with birth relatives for children in out-of-home care. This required a shift to using technologies, which was previously underutilized and viewed as risky. In an action research study, 33 caseworkers in New South Wales, Australia, reflected upon adapting their practices. Three key themes characterized the changes in caseworker practices and how these impacted upon social interactions between children and their birth and carer families: communication, not location; shared not separate spaces and spontaneous not restricted interaction. First, caseworkers described how contact via technologies involved fewer logistical arrangements, shifting the focus on interactions among children and their two families and encouraging these to be flexible and child-centred. Second, caseworkers discussed how spending time together virtually could build trust, as carers and birth relatives could forge relationships around shared commitment to the child's wellbeing. Third, caseworkers noted that technology-facilitated communication enabled greater choice and control for children while requiring renegotiating boundaries. The findings reflect a shift in caseworker perceptions of technology-facilitated contact from a risk to opportunity framework as a result of COVID-19 conditions, consistent with social shaping of technology theory. Beyond the pandemic, contact with birth relatives can be enhanced through technology.

Tuberculosis in Greenland - Time from first contact to diagnosis and treatment

Tuberculosis (TB) is a persistent health issue in Greenland. While rapid diagnosis is crucial to reducing transmission of the disease, remote settlements have limited access to healthcare services. We aimed to assess and compare the time intervals from first contact to diagnosis and treatment for patients with active TB in the cities and settlements of Greenland. A total of 153 cases were included and divided according to place of residence and whether the diagnosis was based on symptomatic presentation or contact tracing. The median time from first contact to diagnosis was 19 days for the total population. The symptomatic settlement population waited longer (median = 88.5 days) than the symptomatic city population (median = 19 days) (p = 0.018). The system interval was longer for the symptomatic settlement population than for the symptomatic city population with a median of 49.5 days vs. 3 days for chest imaging (p < 0.001) and 66.5 days vs. 10 days for expectorate sample (p = 0.008). The diagnostic, system, and total intervals were significantly longer for symptomatic patients in settlements than in cities. This may explain a higher TB incidence in the settlements and calls for the development of better diagnostic pathways.

Snakes combine vertical and lateral bending to traverse uneven terrain

Terrestrial locomotion requires generating appropriate ground reaction forces which depend on substrate geometry and physical properties. The richness of positions and orientations of terrain features in the 3D world gives limbless animals like snakes that can bend their body versatility to generate forces from different contact areas for propulsion. Despite many previous studies of how snakes use lateral body bending for propulsion on relatively flat surfaces with lateral contact points, little is known about whether and how much snakes use vertical body bending in combination with lateral bending in 3D terrain. This lack had contributed to snake robots being inferior to animals in stability, efficiency, and versatility when traversing complex 3D environments. Here, to begin to elucidate this, we studied how the generalist corn snake traversed an uneven arena of blocks of random height variation five times its body height. The animal traversed the uneven terrain with perfect stability by propagating 3D bending down its body with little transverse motion (11° slip angle). Although the animal preferred moving through valleys with higher neighboring blocks, it did not prefer lateral bending. Among body-terrain contact regions that potentially provide propulsion, 52% were formed by vertical body bending and 48% by lateral bending. The combination of vertical and lateral bending may dramatically expand the sources of propulsive forces available to limbless locomotors by utilizing various asperities available in 3D terrain. Direct measurements of contact forces are necessary to further understand how snakes coordinate 3D bending along the entire body via sensory feedback to propel through 3D terrain. These studies will open a path to new propulsive mechanisms for snake robots, potentially increasing the performance and versatility in 3D terrain.

Factors Associated with Transphobia: A Structural Equation Modeling Approach

Our study examined factors associated with transphobia with a particular focus on the interrelations between religious fundamentalism and contact to impact transphobia. We used an online sample of U.S. adults (Mean age = 38.91 years, SD = 12.58 years; n = 400) to conduct a partially latent variable SEM analysis and tested the direct effects of religious fundamentalism, contact, and gender on transphobia and the indirect effects of religious fundamentalism on transphobia through contact. We additionally tested for gender differences in the structural relations of the variables through a multi-group analysis. Results showed a statistically significant effect of religious fundamentalism, contact, and gender on transphobia. Religious fundamentalism also had a statistically significant indirect effect on transphobia through contact. Gender differences were also found for the effects of religious fundamentalism on contact and on transphobia. We conclude with implications for research and practice.

Identity disclosure between donor families and organ transplant recipients: an integrative review of the international literature

Anonymity of deceased organ donation is a legal requirement in many international jurisdictions where legislation prohibits health professionals from disclosing identifiable information about donors, recipients or their families. Written correspondence between donor families and transplant recipients that is coordinated by healthcare professionals must remain anonymous. Internationally, an increasing number of donor families and transplant recipients have advocated for law reform and policy amendment to enable the exchange of identifiable written correspondence and/or face-to-face meetings. This paper aims to synthesise and critically evaluate published, peer-reviewed literature on the perceptions, benefits and challenges of identifiable communication or anonymity between donor families and organ transplant recipients in the international context. Analysis of the findings revealed two major themes: (1) views held by donor families, transplant recipients and healthcare professionals towards identity disclosure in the context of organ donation are diverse across and within groups (2) there are benefits and burdens associated with connecting donor families and transplant recipients through written correspondence. Less is known about the impact of face-to-face meetings between donor families and transplant recipients. However, what is known is that for some donor families, meeting with the transplant recipient(s) may provide a range of positive emotions.

Biomechanical Effects of Graft Shape for the Evans Lateral Column Lengthening Procedure: A Patient-Specific Finite Element Investigation

BACKGROUND

The Evans calcaneal lengthening osteotomy procedure is widely used for correcting progressive collapsing foot deformity. However, it can result in overcorrection and degenerations of the calcaneocuboid joint. Different shapes of graft have been used in the Evans calcaneal osteotomy, but potential differences in their biomechanical effects is still unclear. The present study was designed to explore the biomechanical effects of graft shape and improve the Evans procedure to avoid or minimize detrimental effects.

METHODS

Twelve patient-specific finite element models were established and validated. A triangular or rectangular wedge of varying size was inserted at the lateral edge of calcaneus, and the degree of correction was quantified. The stress in spring ligaments and plantar fascia and the contact characteristics of the talonavicular and calcaneocuboid joints were calculated and compared accordingly.

RESULTS

The rectangular graft provided a much higher degree of correction than triangular grafts did. However, the contact characteristics of the calcaneocuboid joint and talonavicular joint were abnormal, with clear sensitivity to increased graft size, and the modeled strain of the spring ligament increased.

CONCLUSION

The finite element analysis predicts that the rectangular grafts provide a higher degree of correction, but risks overcorrection compared with triangular grafts. The triangular graft may have a lower degree of disturbance to the biomechanical behaviors of the midtarsal joint.

CLINICAL RELEVANCE

The model shows that both the shape and size of an Evans osteotomy bone wedge can have effects on the contiguous joints and ligamentous structures. Those effects should be considered when selecting a bone wedge for an Evans calcaneal osteotomy.

LEVEL OF EVIDENCE

Level III, case-control study.

Surgical treatment of anterior shoulder instability with glenoid bone loss with the Latarjet procedure in active-duty military service members

INTRODUCTION

The arthroscopic Bankart repair in the setting of glenoid bone loss has high rates of failure. In patients with anterior glenoid bone loss, the Latarjet provides glenohumeral stability through restoration of the glenoid bone, the conjoint tendon acting as a sling on the subscapularis, and anterior capsulolabral repair. Active-duty military personnel are at high risk for glenohumeral instability and have been equated to the contact athlete; most are young, male, and engage in contact sports. The purpose of this study is to assess the return to full-duty rates in active-duty military personnel following the Latarjet for anterior glenohumeral instability with glenoid bone loss.

METHODS

A retrospective review of all glenohumeral instability procedures were reviewed at a tertiary training hospital from June 2014 to June 2019. The patient population consisted of active-duty military personnel with glenoid bone loss and anterior glenohumeral instability, who were treated with a Latarjet. The primary outcome was return to full-duty status.

RESULTS

There were 50 patients identified for the study. Four patients were lost to follow-up, leaving 46 of 50 patients (92.0%) eligible for this study. The average age at the time of the index procedure was 23.1 years. The average percentage bone loss was 18.4%. Forty-one patients (89.1%) were able to return to full-duty status. Four patients (8.7%) sustained a recurrent dislocation following the Latarjet; all 4 dislocations occurred during a combat deployment. Four patients (8.7%) reported episodes of subluxation without dislocation. Forty-one patients (89.1%) reported that their shoulders felt stable, and we found an average return to full duty at 5.3 months CONCLUSION: In our active-duty military cohort, we found an 8.7% rate of recurrent instability after a Latarjet procedure, and 41 patients (89.1%) were able to return to full-duty status. In conclusion, the Latarjet procedure in the active-duty military population with anterior glenoid bone loss resulted in a high rate of return to duty, excellent functional outcomes, low rate of recurrent instability, and a low overall complication rate.

Personality traits predict attitudes toward individuals with intellectual disability

Background: Explaining individual differences in people's attitudes toward individuals with intellectual disability (ID) is important for increasing social inclusion of people with ID. The aim of the current study was to replicate and extend past research by formulating a single model of attitudes toward individuals with ID with several predictors: personality traits, quality and quantity of contact, perceived knowledge of ID, social desirability, and demographics. Methods: A sample of 221 undergraduate students in the United States completed several surveys in a lab setting: the Mental Retardation Attitude Inventory-Revised, the Big Five Inventory, McManus et al.'s measures of contact with and perceived knowledge of ID, and the Marlowe-Crowne Social Desirability Scale. Results: Results replicated previous findings by showing quality of contact was the strongest predictor of attitudes. Additionally, we found openness to experience and agreeableness remained significant predictors after holding all other variables constant. A follow-up mediation analysis demonstrated that quality of contact mediated the relations from openness and agreeableness to attitudes. Conclusions: Findings suggest personality factors can influence attitudes toward individuals with ID, and further emphasize the importance of quality of contact. Implications for the social inclusion of individuals with ID are discussed.

Factors associated with workers' attitudes towards employment of persons with intellectual disabilities in Saudi Arabia

BACKGROUND

Persons with intellectual disabilities have the right to pursue and acquire gainful employment and thereby obtain the psychological, social and economic benefits derived from employment.

AIMS

This study aimed to examine workers' attitudes towards and perspectives with respect to the challenges of employing persons with intellectual disabilities.

METHOD

The sample was composed of 168 persons (60% male). Participants responded to a questionnaire that assessed their attitudes towards working with persons with intellectual disabilities (ATWQ) and a challenges questionnaire (CHQ).

RESULTS AND CONCLUSION

This study found that familiarity (frequency of contact) and having a previous work experience with someone with an intellectual disability were positively associated with workers' attitudes towards employing persons with intellectual disabilities. Furthermore, owners and supervisors were more reluctant to accept the practice of employing persons with intellectual disabilities than were employees. No differences were found by gender. Implications based on the findings are discussed herein.

Strategies to Reduce Mental Illness Stigma: Perspectives of People with Lived Experience and Caregivers

BACKGROUND

Reducing the stigma surrounding mental illness is a global public health priority. Traditionally, anti-stigma campaigns were led by mental health professionals/organisations and had an emphasis on increasing mental health literacy. More recently, it has been argued that people with lived experience have much to contribute in terms of extending and strengthening these efforts. The purpose of this paper was to elicit views and suggestions from people with lived experience (PWLE) as well as from informal caregivers of people with mental health conditions, on effective strategies to combat the stigma surrounding mental illness.

METHODS

Six focus group discussions (FGDs) were carried out with PWLE recruited at outpatient services at the Institute of Mental Health, Singapore, and five FGDs were carried out with informal caregivers who responded to advertisements for the study between March and November 2018. In all, the sample comprised 42 PWLE and 31 caregivers. All the FGDs were transcribed verbatim and were analysed using thematic analysis. A pragmatic approach was adopted for the study, and the researchers did not assume any particular philosophical orientation.

RESULTS

Four overarching themes depicting strategies to combat stigma were identified through thematic analysis. They were (1) raising mental health awareness, (2) social contact, (3) advocacy by influential figures or groups, and (4) the legislation of anti-discriminatory laws.

CONCLUSIONS

These strategies were in line with approaches that have been used internationally to disrupt the process of stigma. Our study has further identified nuanced details on how these strategies can be carried out as well as possible areas of priority in the Singapore landscape.

Non-Intrusive Contact Respiratory Sensor for Vehicles

In this work, we propose a low-cost solution capable of collecting the driver's respiratory signal in a robust and non-intrusive way by contact with the chest and abdomen. It consists of a microcontroller and two piezoelectric sensors with their respective 3D printed plastic housings attached to the seat belt. An iterative process was conducted to find the optimal shape of the sensor housing. The location of the sensors can be easily adapted by sliding them along the seat belt. A few participants took part in three test sessions in a driving simulator. They had to perform various activities: resting, deep breathing, manual driving, and a non-driving-related task during automated driving. The subjects' breathing rates were calculated from raw data collected with a reference chest belt, each sensor alone, and the fusion of the two. Results indicate that respiratory rate could be assessed from a single sensor located on the chest with an average absolute error of 0.92 min^-1 across all periods, dropping to 0.13 min^-1 during deep breathing. Sensor fusion did not improve system performance. A 4-pole filter with a cutoff frequency of 1 Hz emerged as the best option to minimize the error during the different periods. The results suggest that such a system could be used to assess the driver's breathing rate while performing various activities in a vehicle.

Migrants' Social Integration and Its Relevance for National Identification: An Empirical Comparison Across Three Social Spheres

A key element of migrants' well-being is their emotional integration, that is, the extent to which they perceive themselves as members of society and their identification with the country they are living in. To foster this sense of belonging, many integration programs aim to increase the migrants' social integration, for example, by organizing events for migrants to meet natives in various settings. The validity of this strategy is supported by decades of international research. It remains unclear, however, which aspects of social integration are most relevant for national identification. Multiple theories concerned with contact and group identification support the assumption that contact to natives should foster a sense of belonging and national identification. However, for a contact situation to bear this potential, a certain set of criteria, including aspects like direct personal contact, a similar social status, and the presence of egalitarian norms, needs to be fulfilled. It is expected that these characteristics are more likely to be fulfilled within family and friendship settings than in contact situations within the employment context. Hence, I expect contact to natives within the network of friends and family to be more greatly associated with migrants' national identification. I analyzed data from a 2013 cooperation between the Institute for Employment Research (IAB) and the German Socio-Economic Panel (SOEP), that is, the IAB-SOEP Migration Sample, as well as the 2014 wave of the SOEP. The subsample used included 2,780 first- and second-generation migrants living in Germany. The results indicate that not all kinds of contact are equally linked to national identification. In contrast to expectations, in neither the cross-sectional models nor the lagged models was living together with native family members significantly linked to national identification. Similarly, the association between having predominantly native co-workers and national identification was insignificant when controlling for migrant-specific characteristics. Only the relation with having predominantly native friends was significant and positive across all models. This as well as a comparison of the associations lead to the conclusion that when it comes to migrants' national identification native friends might be the most relevant form of contact to natives.

High Spatial Resolution Fluorescence Imagery for Optimized Pest Management in a Huanglongbing-Infected Citrus Grove

Huanglongbing (HLB), or citrus greening disease, has significantly decreased citrus production all over the world. The disease management currently depends on the efficient application and adequate distribution of insecticides to reduce the density of the disease vector, the Asian citrus psyllid. Here, we use a novel fluorescent-based method to evaluate insecticide distribution in an HLB-infected citrus grove in Florida. Specifically, we evaluated six different locations within citrus trees, the top and bottom sides of leaves, the effect of application approach (tractor versus airplane), and different application rates. We found that despite the insecticide distribution being highly variable among the different locations within a tree, the top of the leaves received an average increase of 21 times more than the bottom of the leaves. Application by tractor also resulted in a 4- to 87-fold increase in insecticide coverage compared with aerial application, depending on the location in the tree and side of the leaf. When taken to context with the type of insecticide that is applied (systemic vs. contact), these results can be used to optimize a pest management strategy to effectively target psyllids and other pests while minimizing the time and money spent on insecticide application and reducing risk to the environment.

VPS13A and VPS13C Influence Lipid Droplet Abundance

Lipid transfer proteins mediate the exchange of lipids between closely apposed membranes at organelle contact sites and play key roles in lipid metabolism, membrane homeostasis, and cellular signaling. A recently discovered novel family of lipid transfer proteins, which includes the VPS13 proteins (VPS13A-D), adopt a rod-like bridge conformation with an extended hydrophobic groove that enables the bulk transfer of membrane lipids for membrane growth. Loss of function mutations in VPS13A and VPS13C cause chorea acanthocytosis and Parkinson's disease, respectively. VPS13A and VPS13C localize to multiple organelle contact sites, including endoplasmic reticulum (ER) - lipid droplet (LD) contact sites, but the functional roles of these proteins in LD regulation remains mostly unexplored. Here we employ CRISPR-Cas9 genome editing to generate VPS13A and VPS13C knockout cell lines in U-2 OS cells via deletion of exon 2 and introduction of an early frameshift. Analysis of LD content in these cell lines revealed that loss of either VPS13A or VPS13C results in reduced LD abundance under oleate-stimulated conditions. These data implicate two lipid transfer proteins, VPS13A and VPS13C, in LD regulation.

Attitudes Toward People With Intellectual Disability Associated With Integrated Sport Participation

Direct, meaningful contact with people with intellectual disability, such as through integrated sport, may be related to positive attitudes. The current study aimed to compare implicit (unconscious) and explicit (conscious) attitudes between adults involved in integrated sport events and those in a comparison group who were not and examine the association between attitudes and degree of integrated sport involvement. An online survey measuring attitudes was completed by 295 adults without intellectual disability who participated in integrated sport activities and 450 adults who did not. Individuals involved in integrated sport reported less negative behavioral and affective attitudes relative to the comparison group, with mixed results for cognitive attitudes. Groups did not differ on implicit attitudes. Greater integrated sport involvement was related to some aspects of explicit attitudes. Involvement in integrated sport may be linked to how participants view intellectual disability, which has important implications for enhancing social inclusion and informing positive attitudes.