Utility of a modified o-DGT passive sampler for measurement of bisphenol analogues in freshwater and coastal waters

Bisphenol analogues (BPs) are commonly found in riverine and coastal waters. However, the lack of a reliable and robust passive sampling method has hindered our ability to monitor these compounds in aquatic systems. The study developed a novel organic-diffusive gradients in thin film (o-DGT) sampler based on stainless steel mesh membrane, polyacrylamide diffusive gel, and hydrophilic-lipophilic balance (HLB) binding gel. This innovative design tackled issues of filter membrane sorption in traditional o-DGT devices and potential gel damage in membrane-less o-DGT devices, showing promising application prospects. The mass accumulation of 15 target BPs was linear over 10 days in both freshwater (r2 ≥ 0.92) and seawater (r2 ≥ 0.94), with no saturation observed. The diffusion coefficients (D) through polyacrylamide diffusive gels ranged from 4.04 × 10-6 to 5.77 × 10-6 cm2 s-1 in freshwater and from 1.74 × 10-6 to 4.69 × 10-6 cm2 s-1 in seawater for the target BPs (except for bisphenol PH) at 22 °C. The D values of the target BPs in seawater were lower than those in freshwater due to the high salinity in seawater (35 ‰). The o-DGT samplers demonstrated good integrity in field applications. The total concentrations of the eight detected BPs ranged from 9.2 to 323 ng L-1, which was consistent with the measurements obtained by grab sampling. Among all BPs, bisphenol S, bisphenol F, and bisphenol A were consistently detected at all sites using both sampling methods. The concentrations of some novel BPs in coastal water measured by grab sampling were comparable to those measured in rivers, suggesting the need to strengthen pollution control of BPs in coastal areas. These results indicate that the o-DGT passive sampling method developed in the present study can be effectively used for monitoring BPs in freshwater and coastal environments.

Effects of erythromycin on biofilm formation and resistance mutation of Escherichia coli on pristine and UV-aged polystyrene microplastics

Microplastics (MPs) and antibiotics co-occur widely in the environment and pose combined risk to microbial communities. The present study investigated the effects of erythromycin on biofilm formation and resistance mutation of a model bacterium, E. coli, on the surface of pristine and UV-aged polystyrene (PS) MPs sized 1-2 mm. The properties of UV-aged PS were significantly altered compared to pristine PS, with notable increases in specific surface area, carbonyl index, hydrophilicity, and hydroxyl radical content. Importantly, the adsorption capacity of UV-aged PS towards erythromycin was approximately 8-fold higher than that of pristine PS. Biofilms colonizing on UV-aged PS had a greater cell count (5.6 × 108 CFU mg-1) and a higher frequency of resistance mutation (1.0 × 10-7) than those on pristine PS (1.4 × 108 CFU mg-1 and 1.4 × 10-8, respectively). Moreover, erythromycin at 0.1 and 1.0 mg L-1 significantly (p < 0.05) promoted the formation and resistance mutation of biofilm on both pristine and UV-aged PS. DNA sequencing results confirmed that the biofilm resistance was attributed to point mutations in rpoB segment of the bacterial genome. qPCR results demonstrated that both UV aging and erythromycin repressed the expression levels of a global regulator rpoS in biofilm bacteria, as well as two DNA mismatch repair genes mutS and uvrD, which was likely to contribute to increased resistance mutation frequency.

Deep Learning Bridged Bioactivity, Structure, and GC-HRMS-Readable Evidence to Decipher Nontarget Toxicants in Sediments

Identifying causative toxicants in mixtures is critical, but this task is challenging when mixtures contain multiple chemical classes. Effect-based methods are used to complement chemical analyses to identify toxicants, yet conventional bioassays typically rely on an apical and/or single endpoint, providing limited diagnostic potential to guide chemical prioritization. We proposed an event-driven taxonomy framework for mixture risk assessment that relied on high-throughput screening bioassays and toxicant identification integrated by deep learning. In this work, the framework was evaluated using chemical mixtures in sediments eliciting aryl-hydrocarbon receptor activation and oxidative stress response. Mixture prediction using target analysis explained <10% of observed sediment bioactivity. To identify additional contaminants, two deep learning models were developed to predict fingerprints of a pool of bioactive substances (event driver fingerprint, EDFP) and convert these candidates to MS-readable information (event driver ion, EDION) for nontarget analysis. Two libraries with 121 and 118 fingerprints were established, and 247 bioactive compounds were identified at confidence level 2 or 3 in sediment extract using GC-qToF-MS. Among them, 12 toxicants were analytically confirmed using reference standards. Collectively, we present a "bioactivity-signature-toxicant" strategy to deconvolute mixtures and to connect patchy data sets and guide nontarget analysis for diverse chemicals that elicit the same bioactivity.

Per- and polyfluoroalkyl substances (PFAS) exposure in plasma and their blood-brain barrier transmission efficiency-A pilot study

Per- and polyfluoroalkyl substances (PFAS) have been shown to penetrate the blood-brain barrier (BBB) and accumulate in human brain. The BBB transmission and accumulation efficiency of PFAS, as well as the potential health risks from human co-exposure to legacy and emerging PFAS due to differences in transport efficiency, need to be further elucidated. In the present pilot study, 23 plasma samples from glioma patients were analyzed for 17 PFAS. The concentrations of PFAS in six paired brain tissue and plasma samples were used to calculate the BBB transmission efficiency of PFAS (RPFAS). This RPFAS analysis was conducted with utmost care and consideration amid the limited availability of valuable paired samples. The results indicated that low molecular weight PFAS, including short-chain and emerging PFAS, may have a greater potential for accumulation in brain tissue than long-chain PFAS. As an alternative to perfluorooctane sulfonic acid (PFOS), 6:2 chlorinated polyfluorinated ether sulfonate (6:2 Cl-PFESA) exhibited brain accumulation potential similar to that of PFOS, suggesting it may not be a suitable substitute concerning health risk in brain. The BBB transmission efficiencies of perfluorooctanoic acid, PFOS, and 6:2 Cl-PFESA showed similar trends with age, which may be an important factor influencing the entry of exogenous compounds into the brain. A favorable link between perfluorooctane sulfonamide (FOSA) and the development and/or progression of glioma may be implicated by a strong positive correlation (r2 = 0.94; p < 0.01) between RFOSA and Ki-67 (a molecular marker of glioma). However, a causal relationship between RFOSA and glioma incidence were not established in the present study. The present pilot study conducted the first examination of BBB transmission efficiency of PFAS from plasma to brain tissue and highlighted the importance of reducing and/or controlling exposure to PFAS.

Occurrence, Spatial Distribution, and Bioaccumulation of Dissolved Synthetic Musks in Freshwaters across China

Commercial chemicals, such as synthetic musks, are of global concern, but data on their occurrence and spatial distribution in aquatic environments of large scale are scarce. Two sampling campaigns were conducted in the present study to measure freely dissolved synthetic musks in freshwaters across China using passive samplers, along with biological coexposure at selected sites. Polycyclic musks (PCMs) dominated synthetic musks, with a detection frequency of 95%. Higher concentrations of PCMs were observed in densely populated Mid, East, and South China compared to less populated regions, indicating the significance of anthropogenic activities for synthetic musks in water. The concentration ratios of galaxolide (HHCB)/tonalide (AHTN) were significantly higher in low-latitude areas than in high-latitude areas from June to September, suggesting that solar radiation played an important role in the degradation of HHCB/AHTN. Significant correlations were found between dissolved concentrations of HHCB and AHTN and their lipid-normalized concentrations in coexposed fish and clam. The estimated hazard quotients for HHCB and AHTN in freshwater fish consumed by humans were less than 0.01 at all sampling sites except the Yangtze River Basin. These results help to understand the environmental fate and ecological risks of synthetic musks on a large geographical scale.

Use of machine learning to identify key factors regulating volatilization of semi-volatile organic chemicals from soil to air

Volatilization from soil to air is a key process driving the distribution and fate of semi-volatile organic contaminants. However, quantifying this process and the key environmental governing factors remains difficult. To address this issue, the volatilization fluxes of polybrominated diphenyl ethers (PBDEs) and organophosphate esters (OPEs) from soil were determined in 16 batch experiments orthogonally with six variables (chemical property, soil concentration, air velocity, ambient temperature, soil porosity, and soil moisture) and analyzed with machine learning methods. The results showed that gradient-boosting regression tree models satisfactorily predicted the volatilization fluxes of PBDEs (r2 = 0.82 ± 0.07) and OPEs (r2 = 0.62 ± 0.13). Permutation importance analysis showed that partitioning potential of chemicals between soil and air was the most important factor regulating the volatilization of the target compounds from soil. Temperature and soil porosity played a secondary role in controlling the migration of PBDEs and OPEs, respectively, due to higher volatilization enthalpies of PBDEs than those of OPEs and dominant adsorption of OPEs on mineral surface. The effect of soil moisture was negative and positive for the volatilization fluxes of PBDEs and OPEs, respectively. These results suggested different responses in the soil-air diffusive transport of PBDEs and OPEs to high temperature and rainstorm induced by climate change.

Modeled Pathways and Fluxes of PCB Dechlorination by Redox Potentials

Dechlorination is one of the main processes for the natural degradation of polychlorinated biphenyls (PCBs) in an anaerobic environment. However, PCB dechlorination pathways and products vary with PCB congeners, types of functional dechlorinating bacteria, and environmental conditions. The present study develops a novel model for determining dechlorination pathways and fluxes by tracking redox potential variability, transforming the complex dechlorination process into a stepwise sequence. The redox potential is calculated via the Gibbs free energy of formation, PCB concentrations in reactants and products, and environmental conditions. Thus, the continuous change in the PCB congener composition can be tracked during dechlorination processes. The new model is assessed against four measurements from several published studies on PCB dechlorination. The simulation errors in all four measurements are calculated between 2.67 and 35.1% under minimum (n = 0) and maximum (n = 34) numbers of co-eluters, respectively. The dechlorination fluxes for para-dechlorination pathways dominate PCB dechlorination in all measurements. Furthermore, the model also considers multiple-step dechlorination pathways containing intermediate PCB congeners absent in both the reactants and the products. The present study indicates that redox potential might be an appropriate indicator for predicting PCB dechlorination pathways and fluxes even without prior knowledge of the functional dechlorinating bacteria.

Fluorescent Visualization of Chemical Profiles across the Air-Water Interface

Chemical transfer across the air-water interface is one of the most important geochemical processes of global significance. Quantifying such a process has remained extremely challenging due to the lack of suitable technologies to measure chemical diffusion across the air-water microlayer. Herein, we present a fluorescence optical system capable of visualizing the formation of the air-water microlayer with a spatial resolution of 10 μm and quantifying air-water diffusion fluxes using pyrene as a target chemical. We show for the first time that the air-water microlayer is composed of the surface microlayer in water (∼290 ± 40 μm) and a diffusion layer in air (∼350 ± 40 μm) with 1 μg L-1 of pyrene. The diffusion flux of pyrene across the air-water interface is derived from its high-resolution concentration profile without any pre-emptive assumption, which is 2 orders of magnitude lower than those from the conventional method. This system can be expanded to visualize diffusion dynamics of other fluorescent chemicals across the air-water interface and provides a powerful tool for furthering our understanding of air-water mass transfer of organic chemicals related to their global cycling.

Hydrophobic organic contaminants affiliated with polymer-specific microplastics in urban river tributaries and estuaries

Exposure to microplastics (MPs) and hydrophobic organic contaminants (HOCs) combined at high concentrations may induce adverse effects to aquatic organisms in laboratory-scale studies. To determine environmentally relevant concentrations of HOCs in MPs, it is essential to understand the occurrence of MP-affiliated HOCs in the aquatic environment. Here we report the occurrences of HOCs affiliated with polymer-specific floating MPs from 12 tributaries and three estuaries in the Pearl River Delta, South China. Target HOCs include nine synthetic musks (SMs), 14 ultraviolet adsorbents (UVAs), 15 polycyclic aromatic hydrocarbons (PAHs), eight polybrominated diphenyl ethers (PBDEs), and 14 polychlorinated biphenyls (PCBs). Average concentrations of MP-affiliated ∑9SM, ∑14UVA, ∑15PAH, ∑8PBDE, and ∑14PCB were 1790, 5550, 1090, 412, and 107 ng g-1, respectively. The average concentrations of HOCs affiliated with MPs of different polymer types were 9790, 7220, 72,500, and 55,800 ng g-1 for polyethylene (PE), polypropylene, polystyrene, and other MPs, respectively. As the concentration of PE was the highest among all MPs at the average concentration of 0.77 mg m-3, the monthly outflow of PE-affiliated HOCs accounted for the largest proportion (46 %) in the outflow of MP-affiliated HOCs (2.8 g) to the coastal ocean via three estuaries. These results suggest that HOCs were highly concentrated in MPs and varied among different chemicals and polymer types. Due to the differences of polymer characteristics and half-life of affiliated chemicals, future toxicology studies concerning exposure to these combined pollutants may need to specify polymer types and their affiliated chemicals.

Particle transfer mediates dermal exposure of consumers to plasticizers in eraser and pen accessories

Dermal exposure to chemicals released from daily consumer products is a rising concern, particularly for children who are susceptible to unintentional hand-to-mouth transfer and related chemical exposure risk. However, chemical transfer induced by tiny particles of intact products has yet to be adequately addressed. The objective of the present study was to determine the potentiality of particles release from intact erasers and pen grips upon dermal contact by measuring the migration rates of the embedded plasticizers (phthalates and its alternatives). The results showed that billions of particles were released from erasers (0.6-1.2 × 109) and pen grips (0.2-1.6 × 108) upon dermal contact at ambient temperature, with sizes mainly smaller than 1 μm. The composition of eraser leachates was identical to that of the corresponding bulk eraser, as confirmed by Fourier-transform infrared spectroscopy and pyrolysis. Migrated hydrophobic plasticizers may be used as indicators of particle release from erasers and pen grips. The potentiality of particle release was negatively correlated with the total plasticizer contents (r = -0.51; p < 0.05) for both erasers and pen grips. These findings indicated that particles directly released from school supplies and accessories could be a non-negligible source of human exposure to plasticizers.

Passive-Sampler-Derived PCB and OCP Concentrations in the Waters of the World─First Results from the AQUA-GAPS/MONET Network

Persistent organic pollutants (POPs) are recognized as pollutants of global concern, but so far, information on the trends of legacy POPs in the waters of the world has been missing due to logistical, analytical, and financial reasons. Passive samplers have emerged as an attractive alternative to active water sampling methods as they accumulate POPs, represent time-weighted average concentrations, and can easily be shipped and deployed. As part of the AQUA-GAPS/MONET, passive samplers were deployed at 40 globally distributed sites between 2016 and 2020, for a total of 21 freshwater and 40 marine deployments. Results from silicone passive samplers showed α-hexachlorocyclohexane (HCH) and γ-HCH displaying the greatest concentrations in the northern latitudes/Arctic Ocean, in stark contrast to the more persistent penta (PeCB)- and hexachlorobenzene (HCB), which approached equilibrium across sampling sites. Geospatial patterns of polychlorinated biphenyl (PCB) aqueous concentrations closely matched original estimates of production and use, implying limited global transport. Positive correlations between log-transformed concentrations of Σ₇PCB, ΣDDTs, Σendosulfan, and Σchlordane, but not ΣHCH, and the log of population density (p < 0.05) within 5 and 10 km of the sampling sites also supported limited transport from used sites. These results help to understand the extent of global distribution, and eventually time-trends, of organic pollutants in aquatic systems, such as across freshwaters and oceans. Future deployments will aim to establish time-trends at selected sites while adding to the geographical coverage.

Country-specific riverine contributions to marine plastic pollution

Marine plastic debris are mainly derived from land-based sources, and the transport of plastics via global rivers is of great concern. Ample efforts have been made in estimating the land-based contributions of plastic to the global oceans, but quantifying country-specific (and per capita) riverine outflows is an important step toward the development of a globally integrated framework to mitigate marine plastic pollution. To estimate the country-specific riverine contributions to global marine plastic pollution, we built a River-to-Ocean model framework. In 2016, the median annual country-specific riverine plastic outflows and related per capita values for 161 countries varied between 0.76 and 103,000 metric tons (MT) and 0.83-248 g, respectively. India, China, and Indonesia were the top three contributors to riverine plastic outflows, whereas Guatemala, Philippines, and Colombia had the highest per capita riverine plastic outflows. The total riverine plastic outflow from 161 countries was in the range of 0.15-0.53 million MT annually, accounting for 0.4 %-1.3 % of the 40 million MT plastic waste generated yearly by more than seven billion humans. Population, plastic waste generation, and Human Development Index are the dominant factors influencing riverine plastic outflows to global oceans from individual countries. Our findings provide an important basis for launching effective plastic pollution management and control measures in global countries.

Effects of organic carbon/elemental carbon and particle size on inhalation bioaccessibility of particle-bound PAHs

Bioaccessible fractions of particle-bound hydrophobic organic compounds (HOCs) are critical to evaluating human inhalation exposure risk. However, the key factors for controlling the release of HOCs into the lung fluid are not adequately examined. To address this issue, eight particle size fractions (0.056-18 μm) from different particle emission sources (barbecue and smoking) were collected and incubated with an in vitro method for determining inhalation bioaccessibilities of polycyclic aromatic hydrocarbons (PAHs). The bioaccessible fractions of particle-bound PAHs were 35-65 % for smoke-type charcoal, 24-62 % for smokeless-type charcoal, and 44-96 % for cigarette. The size distributions of bioaccessible fractions of 3-4 ring PAHs were symmetric with the patterns of their masses, characterized as a unimodal distribution with both the trough and peak at 0.56-1.0 μm. Analysis from machine learning showed that chemical hydrophobicity appeared to be the most significant factor affecting inhalation bioaccessibility of PAHs, followed by organic carbon and elemental carbon contents. Particle size seemed to have little effect on the bioaccessibility of PAHs. A compositional analysis of human inhalation exposure risk from total concentration, deposition concentration, and bioaccessible deposition concentration in alveolar region showed a shift in the key particle size from 0.56 to 1.0 μm to 1.0-1.8 μm and an increasing in the contributions of 2-3 ring PAHs to risk for cigarette due to the high bioaccessible fractions. These results suggested the significance of particle deposition efficiency and bioaccessible fractions of HOCs in risk assessment.

Insufficient evidence to link human exposure to heavy metals with biomarkers of glioma

Information on molecular mechanisms has implicated potential association between the concentrations of heavy metals and incidences of glioma, but experimental data on human brain tissue remain sparse. To address this data gap, 13 heavy metals were measured in 137 glioma and 35 non-glioma samples collected from 161 alive patients in Guangdong Province, China in 2019 - 2020. All target heavy metals were detected, suggesting they could cross the blood-brain barrier. Concentrations of Mn, Cu, and Zn were higher in glioma than in non-glioma samples, while those of Ni and Se were higher in non-glioma samples, probably suggesting that these five heavy metals are more prone to be altered by changing pathological conditions. In addition, Cu/Zn, Cr/Mn, Cr/Se, Ni/Se, Pb/Mn, and Pb/Se were statistically different between glioma and non-glioma samples by a difference test and a multiple logistic regression model. These concentration ratios may serve as chemical markers to assist pathological analysis for differentiating between tumor and healthy tissues. However, no direct link between heavy metal concentrations or concentration ratios and biomarkers of glioma (i.e., tumor grade, P53, and Ki-67) was observed. No sufficient evidence was obtained to implicate the role of heavy metals in inducing glioma, largely caused by the limited number of samples. Different concentrations and concentration ratios of heavy metals may be the consequence rather than the cause of pathological changes in brain tumors.

Joint effects of temperature and copper exposure on developmental and gene-expression responses of the marine copepod Tigriopus japonicus

There is growing contamination of copper (Cu) in the marine environment, particularly after the ban of organotin compounds and the increase of the use of Cu-based antifouling paints. Although there are increasing research interests in temperature-dependent chemical toxicity to aquatic organisms, most existing studies focused on acute impacts of chemicals at high concentrations. This study aimed to investigate the interacting effect of temperature and copper exposure at environmentally relevant concentrations on survival and development in the marine copepod Tigriopus japonicus with a partial life-cycle toxicity test. Expressions of five stress response genes in the copepod, namely two glutathione S-transferases (GST-S and GST-O), two heat shock proteins (HSP70 and HSP90), and glutathione reductase (GR) were also investigated. The copepod's survival was significantly impaired at 15 °C after development to adult stage, while its developmental time reduced significantly with increasing temperature. Copper at the two environmentally relevant test concentrations had no significant impacts on these apical endpoints whereas the interaction between Cu and temperature was more significant in modulating gene expressions. GST-S, GST-O and HSP90 genes in copepods exposed to 100 µg Cu L^-1 were significantly upregulated at 20 °C. At 32 °C, most genes were either insignificantly expressed or down-regulated, compared to the control, likely suggesting that thermal stress inhibited the copepod's antioxidative defense system. Overall, the results revealed that the joint Cu and thermal stresses have significantly elicited antioxidative system in the copepods. It clearly demonstrated the need for more fundamental studies about potential impacts of different environmental factors such as temperature on chemical toxicity under realistic scenario of marine pollution.

Environmental fate of microplastics in an urban river: Spatial distribution and seasonal variation

Rivers are recognized as an important pathway for transport of microplastics (MPs) from land to sea, but limited information is available on the spatial distribution and seasonal variation of riverine MPs from upper reaches to estuaries. Such information is critical for source apportionment and development of effective management measures for riverine MPs. To fill the knowledge gap, we investigated the occurrence of MPs in surface water along an urban river in Guangzhou, southern China in wet and dry seasons. The abundances of MPs from 16 sampling sites in the wet and dry seasons varied from 0.123 to 1.84 particles m^-3 and from 0.046 to 4.21 particles m^-3, respectively. The spatial distribution of MP abundances showed an increasing trend from upstream to midstream and a decreasing trend from midstream to downstream and estuaries. The abundances of MPs peaked at the midstream, which is surrounded by a highly urbanized region with high population density (∼2530 persons per km²). The large surface water runoff during the wet season elevated the MP abundance in riverine water, except for that flowing through the central urban area where the abundance of MPs collected in the dry season was higher than that in the wet season. This was mainly ascribed to the large input from extensive anthropogenic activities and slow water flow rate in urban areas. The estimated monthly riverine MP fluxes from Humen, Hongqili, and Jiaomen were 7.42, 2.38, and 2.3 billion particles, respectively, in the wet season, and 0.86, 0.71, and 0.19 billion particles, respectively, in the dry season. An increase of riverine MP fluxes from Humen, Hongqili, and Jiaomen in the past three years was evident. The results from the present study provide valuable information for source apportionment of riverine MPs and support the initialization of possible MPs controlling measures.

Predicted health and environmental hazards of liquid crystal materials via quantitative structure-property relationship modeling

Liquid crystal materials (LCMs) are considered as emerging contaminants with high persistent and bioaccumulative potentials, but their toxicological effects are not well understood. To address this issue, a list of 1431 LCMs commercially available in the market was established through literature reviews and surveys of LCM suppliers. Toxicological properties of 221 target LCMs were derived from the Classification and Labeling Inventory by the European Chemicals Agency. More than 80 % of target LCMs likely pose adverse effects on human health or aquatic ecosystems. Two quantitative structure-property relationship (QSPR) models developed from the toxicological properties of LCMs achieved approximately 90 % accuracy in external data sets. The probability-based approach was more efficient in defining the applicability domain for the QSPR models than a range- or distance-based approach. The highest accuracy was achieved for chemicals within the probability-based applicability domain. The QSPR models were applied to predict health and environmental hazards of 1210 LCMs that had not been notified to the Classification and Labeling Inventory, and 301 and 94 LCMs were recognized as posing potential hazards to human health and the environment, respectively. The present study highlights the potential detrimental effects of LCMs and offers a specific in silico technique for screening hazardous LCMs.

Impact of iron/aluminum (hydr)oxide and clay minerals on heteroaggregation and transport of nanoplastics in aquatic environment

Nanoplastics (NPs) are emerging contaminants in the environment, where the transport and fate of NPs would be greatly affected by interactions between NPs and minerals. In the present study, the interactions of two types of polystyrene nanoplastics (PSNPs), i.e., bare-PSNPs and carboxylated PSNPs-COOH, with iron (hydr)oxides (hematite, goethite, magnetite, and ferrihydrite), aluminum (hydr)oxides (boehmite and gibbsite), and clay minerals (kaolinite, montmorillonite, and illite) were investigated. The positively charged iron/aluminum (hydr)oxide minerals could form heteroaggregates with negatively charged PSNPs. Electrostatic and hydrophobic interaction dominate for the heteroaggregation of bare-PSNPs with iron/aluminum (hydr)oxide minerals, while ligand exchange and electrostatic interaction are involved in the heteroaggregation of PSNPs-COOH with iron/aluminum (hydr)oxides minerals. However, heteroaggregation between PSNPs and negatively charged clay minerals was negligible. Humic acid markedly suppressed such heteroaggregation between PSNPs and minerals due to enhanced electrostatic repulsion, steric hindrance, and competition of surface attachment sites. The heteroaggregation rates of both bare-PSNPs and PSNPs-COOH with hematite decreased with increasing solution pH. Increased ionic strength enhanced the heteroaggregation of PSNPs-COOH but inhibited that of bare-PSNPs. The results of the present study suggested that the heteroaggregation of PSNPs in environments could be strongly affected by minerals, solution pH, humic acid, and ionic strength.

Plastic waste discharge to the global ocean constrained by seawater observations

Marine plastic pollution poses a potential threat to the ecosystem, but the sources and their magnitudes remain largely unclear. Existing bottom-up emission inventories vary among studies for two to three orders of magnitudes (OMs). Here, we adopt a top-down approach that uses observed dataset of sea surface plastic concentrations and an ensemble of ocean transport models to reduce the uncertainty of global plastic discharge. The optimal estimation of plastic emissions in this study varies about 1.5 OMs: 0.70 (0.13-3.8 as a 95% confidence interval) million metric tons yr-1 at the present day. We find that the variability of surface plastic abundance caused by different emission inventories is higher than that caused by model parameters. We suggest that more accurate emission inventories, more data for the abundance in the seawater and other compartments, and more accurate model parameters are required to further reduce the uncertainty of our estimate.

Size-resolved gas-particle partitioning characteristics of typical semi-volatile organic compounds in urban atmosphere

Understanding particle size distribution and size-resolved gas-particle partitioning of semi-volatile organic compounds (SVOCs) is important for characterizing their fate in atmosphere. However, the size-resolved gas-particle partitioning characteristics of SVOCs has not been adequately considered. To address this issue, the present study collected gaseous and size-fractioned particulate samples both in and outside of schools, offices, and residences in three districts of different urbanization levels in a megacity, Guangzhou, South China during two seasons. Typical SVOCs, including 15 polycyclic aromatic hydrocarbons (PAHs), six organophosphate esters and seven phthalic acid esters were measured. Emission sources, physicochemical properties, and environmental conditions at the sampling sites considerably impacted the spatiotemporal distribution patterns and particle size distribution of target SVOCs. Not all observed gas-particle partition coefficients (K_p) of target SVOCs were negatively correlated with subcooled liquid-vapor pressures (P_L⁰), probably because certain factors, such as the non-exchangeable part of the particle-bound SVOCs, were not considered in traditional gas-particle partition theories. Particle size was an important factor affecting gas-particle partitioning. Adsorption was the dominant mechanism for PAHs with high molecular weight in different particle modes. A new model was established to predict size-resolved K_p of PAHs with high molecular weight based on P_L⁰ and particle size.

Glioma is associated with exposure to legacy and alternative per- and polyfluoroalkyl substances

Data on the occurrences of legacy and alternative per- and polyfluoroalkyl substances (PFASs) in glioma are scarce. It remains unclear if PFASs exposure is related to the prevalence of glioma. A total of 137 glioma and 40 non-glioma brain tissue samples from patients recruited from the Nanfang Hospital, South China were analyzed for 17 PFAS compounds. Perfluorohexanoic acid, perfluorooctanoic acid (PFOA), perfluorooctane sulfonate (PFOS), perfluorooctane sulfonamide (FOSA), and 6:2 chlorinated polyfluorinated ether sulfonate were frequently detected (> 60 %) in glioma. The total concentrations (range; median) of 17 PFASs in glioma (0.20-140; 3.1 ng g^-1) were slightly higher than those in non-glioma (0.35-32; 2.2 ng g^-1), but without statistical significance. The PFAS concentrations in males were statistically higher (p < 0.05) than those in females. Elevated glioma grades were associated with higher concentrations of PFOA, PFOS, and FOSA. Positive correlations were observed between PFAS concentrations (especially for PFOA) and Ki-67 or P53 expression, pathological molecular markers of glioma. Our findings suggested that exposure to PFASs might increase the probability to develop glioma. This is the first case study demonstrating associations between PFASs exposure and brain cancer. More evidences and potential pathogenic mechanisms warranted further investigations.

An overview of organophosphate esters and their metabolites in humans: Analytical methods, occurrence, and biomonitoring

With the strict regulation of brominated flame retardants, organophosphate esters (OPEs) have been extensively used as replacements. Increasing concerns on OPEs have aroused due to their extensive distribution in the environment and humans, as well as their potential toxicities. Recent studies have demonstrated that some organophosphate di-esters are even more toxic than their respective tri-esters. This review summarized the current state of knowledge on the analytical methodologies (including sample collection and preparation, instrumental analysis, and the feasibility of each potential human matrix), as well as the occurrences of OPEs and/or their metabolites (m-OPEs) in various human matrices. Organophosphate esters are readily metabolized in human thus only limited studies reported their occurrences in blood and breast milk, whereas abundant studies are available regarding the occurrences of m-OPEs rather than OPEs in urine. Since none of the matrix is suitable all the time, appropriate matrix should be selected depending on the aims of biomonitoring studies, e.g., high throughput screening or body burden estimation. Biomonitoring with non-invasive matrices such as hair and/or nail is useful to screen specific populations that might be under high exposure risks while urine is more suitable to provide valuable information on body burden. In terms of urinary monitoring, specific biomarkers have been identified for some OPE compounds, including tri(2-butoxyethyl) phosphate, tri(1,3-dichloro-2-propyl) phosphate, tri(2-chloroethyl) phosphate and tri(1-chloro-2-propyl) phosphate. Further studies are required to identify suitable urinary biomarkers for other OPE compounds, especially the emerging ones.

Decadal Journey of E-Waste Recycling: What Has It Achieved?

E-waste recycling has been a hot topic around the world. This Feature revisits the issues raised by our previous Feature 10 years ago, i.e., the environmental, economic, and social benefits of e-waste recycling, using China as an example. The decadal journey of e-waste recycling has witnessed a giant leap from haphazard disposal initially to regulated disassembly presently. Specific successful stories include cleaned environment and reduced human exposure, significant advantages of urban mining over mineral mining, additional employment opportunities, and improved legislation system related to e-waste recycling. Strict legislation systems related to e-waste management based on the principle of Extended Producer Responsibility are key to the sustainable development of the e-waste recycling sector in China. The experiences and lessons learned in China would provide valuable guidelines for other developing countries.

Transfer of Frictional Contact Derived Phthalates from Pad Surface Enhances Dermal Exposure

Dermal exposure to chemicals derived from object surface contact is an important contributor to increased health risk. However, chemical transfer induced by mechanical friction between dermal and object surface has yet to be adequately addressed. To fill this knowledge gap, rubbing fabrics were used as surrogate skins to stimulate dermal mechanical friction with pad products with phthalates as target analytes. The results showed that the amounts of phthalates transferred increased linearly with contact burden (50-1000 g), contact duration (1-10 min), and sliding speed (3.0-9.0 cm s^-1). The surface texture of surrogate skins dictated the accumulation of phthalates. Net/pocket micro-surface structures of rubbing fabrics induced a higher accumulation of phthalates than U-shape structures of fabrics with a similar surface roughness. Covering of the pad surface by a layer of textile was effective in minimizing the transfer of phthalates induced by mechanical motion. The estimated transfer efficiency of bis(2-ethylhexyl) ester (DEHP) derived from rubbing friction (0.005-0.05%) upon the pad surface over 8 h was greater than those for gas-phase emission (0.00002-0.0005% over 24 h) and sweat transfer (0.008-0.012% over 24 h). These results indicated that dermal frictional contact with the surface of pad products was an important exposure pathway.

Significant input of organophosphate esters through particle-mediated transport into the Pearl River Estuary, China

Most organophosphate esters (OPEs) enter the marine environment through atmospheric deposition and surface runoff, yet the role of particle-mediated transport in their inputs and loss processes remains poorly understood. To fill this knowledge gap, samples of size-segregated atmospheric particles, suspended particulate matter (SPM) in seawater, and sediments in the Pearl River Estuary (PRE) were collected and analyzed for OPEs. Total concentrations of atmospheric particulate OPEs showed a decreasing trend with increasing offshore distance in the PRE. The spatial and vertical distribution patterns of OPEs in SPM were diverse, which could be largely affected by physicochemical properties of SPM, marine microbial activities, hydrodynamic conditions, and environmental factors. Sediment in the region close to Modaomen outlet was subject to relatively high OPE concentrations. Approximately 24,100 and 65,100 g d^-1 of particulate OPEs were imported into the PRE through atmospheric deposition and surface runoff, respectively; 83,200 g d^-1 of which were exported to the open sea. The input and environmental fate of particulate OPEs were found to be dependent on sources, particulate media, and chemical species. The present study provides insights into the influence of OPEs in the PRE through particle-mediated transport and calls for more concern on anthropogenic impact on the estuary.

Insights into the Atmospheric Persistence, Transformation, and Health Implications of Organophosphate Esters in Urban Ambient Air

Transformation of organophosphate esters (OPEs) in natural ambient air and potential health risks from coexposure to OPEs and their transformation products are largely unclear. Therefore, a novel framework combining field-based investigation, in silico prediction, and target and suspect screening was employed to understand atmospheric persistence and health impacts of OPEs. Alkyl-OPE transformation products ubiquitously occurred in urban ambient air. The transformation ratios of tris(2-butoxyethyl) phosphate were size-dependent, implying that transformation processes may be affected by particle size. Transformation products of chlorinated- and aryl-OPEs were not detected in atmospheric particles, and atmospheric dry deposition might significantly contribute to their removal. Although inhalation risk of coexposure to OPEs and transformation products in urban ambient air was low, health risks related to OPEs may be underestimated as constrained by the identification of plausible transformation products and their toxicity testing in vitro or in vivo at current stage. The present study highlights the significant impact of particle size on the atmospheric persistence of OPEs and suggests that health risk assessments should be conducted with concurrent consideration of both parental compounds and transformation products of OPEs, in view of the nonnegligible abundances of transformation products in the air and their potential toxicity in silico.

Comment on "The missing ocean plastic sink: Gone with the rivers"

Weiss et al. (Reports, 2 July 2021, p. 107) incorrectly conclude that the residence time for floating microplastic stock at the ocean surface is ~2.4 years. We contend that this conclusion is fundamentally flawed, because the residence time is obtained through dividing a published oceanic stock of plastic debris by a doubtable river microplastic flux estimated by the authors.

Surface-catalyzed electro-Fenton with flexible nanocatalyst for removal of plasticizers from secondary wastewater effluent

Activation of H₂O₂ with metal-free catalysts is an efficient and environmentally benign alternative to electron-Fenton (EF) for organics degradation. In the present study, flexible nanocatalysts were synthesized with self-regulated metal oxide nanoparticles (FeOx NPs) for efficient removal of plasticizers from secondary wastewater effluent (SWE). Compared with NGr/EF and FeOx@Gr/EF systems, FeOx@NGr/EF could enhance the decay kinetics of plasticizers by 3.9-4.4 times and reduce 48-59% of the disposal cost. Reactive oxygen species tests and trapping experiments proved that the surface-catalyzed EF effectively broadened the range of solution pH. Density functional theory calculations coupled with electrochemical measurements indicated that the electron transfer rates between Fe-O-C atoms were enhanced with N-doping due to strong interactions between N-Fe bond. The synergistic effects of FeOx and N could improve the oxygen reduction activity for H₂O₂ generation, and accelerate electron transfer between FeOx/NGr and H₂O₂ for ^•OH generation, offering an alternative for wastewater treatment.

Biobased plastic: A plausible solution toward carbon neutrality in plastic industry?

Biobased plastic exhibits unique benefits for achieving carbon neutrality, a key step toward reducing atmospheric greenhouse gases, due to its stability, high carbon content, and origin of carbon by photosynthesis. Herein we evaluate the role and potential of biobased plastic as an alternative carbon reservoir which is completely artificial, since most plastic polymers are synthetic and massively produced after the 1950 s. Model simulation indicates that plastic, under usage, burial, and littering, forms a growing carbon reservoir, sinking 6.82 gigatons of carbon (GtC) in 2020. Plastic-formed carbon is estimated to stack up to 19.4-23.2 GtC in 2060 under various production scenarios. However, only 18-40% of carbon stored in plastic is biobased carbon, equivalent to approximately 31-48 gigatons of carbon dioxide. Without any low carbon energy upgrade, carbon neutrality is difficult to achieve even with 90% biobased plastic substitution and 50% recycling ratio. Because extra GHG emissions are generated as a result of increasingly using incineration as a post-treatment strategy in response to increasing waste generation, the annual net GHG emission continues to rebound after the bio-based plastic substitution and plastic recycling approach their upper limits. Additional strategies are therefore needed to achieve complete carbon neutrality.

Extreme cold or warm events can potentially exacerbate chemical toxicity to the marine medaka fish Oryzias melastigma

Marine ecosystems are currently subjected to dual stresses of chemical pollution and climate change. Through a series of laboratory experiments, this study investigated the impact of exposure to chemical contaminant such as DDT or copper (Cu), in combination with cold or warm temperature extremes on the marine medaka fish Oryzias melastigma. The results showed that extreme seawater temperatures (i.e., 15 and 32 °C in sub-tropical Hong Kong) exacerbated adverse chemical impacts on the growth performance of O. melastigma, in particular at the high thermal extreme. This was likely associated with an interruption of oxygen consumption and aerobic scope. Most importantly, the results of acclimation experiments, as reflected by thermal tolerance polygons, showed that chemical exposure substantially narrowed the thermal tolerance of the medaka, making them more vulnerable to temperature changes and extreme thermal events. Under dual stresses of thermal extremes and chemical exposure, the medaka switched their metabolic pathway to anaerobic respiration that might deplete their energy reserve for chemical detoxification. Although stress proteins such as heat shock proteins (HSP90) were up-regulated for cellular protection in the fish, such a defensive mechanism was repressed with intensifying dual stresses at high temperature and high chemical concentration. Bioconcentration of DDT or Cu generally increased with increasing temperature and its exposure concentration. Overall, these complex chemical-temperature interactions concomitantly exerted a concerted adverse impact to O. melastigma. The temperature-dependent toxicity of DDT or Cu shown in this study clearly demonstrated the potential challenge brought by the risk of chemical pollution under the impact of global climate change.

Riverine transport dynamics of PBDEs and OPFRs within a typical e-waste recycling zone: Implications for sink-source interconversion

Despite ample evidence on spreading of e-waste derived hazardous materials, riverine transport of organic contaminants from e-waste recycling zones to surrounding areas has not been evaluated. To address this issue, passive and grab sampling methods were used to assess sediment-water diffusion and horizontal transport of polybrominated diphenyl ethers (PBDEs) and organophosphorus flame retardant (OPFRs) at upstream and downstream sites of two rivers in a typical e-waste recycling zone. Sediment acted as a source of BDE-17 with fluxes of 0.007-0.04 ng m^-2 d^-1 at all sampling sites. BDE-47 and BDE-99 reached equilibrium between overlying water and sediment porewater. Sediment interconverted from a sink at the upstream site to a source of OPFRs at the downstream site with a flux varying between -7.3 and 234 ng m^-2 d^-1. The amounts of OPFRs (11-45 g d^-1) via horizontal riverine transport were greater than those of PBDEs (0.68-2 g d^-1). The vertical sediment-water diffusion of PBDEs and OPFRs was not significant compared to horizontal riverine transport. The annual riverine outputs of PBDEs and OPFRs from the downstream sites were 250-330 g and 12,000-16,500 g, respectively, indicating the significance of riverine transport of organic contaminants from e-waste recycling zones to surrounding areas.

Emissions of Liquid Crystal Monomers from Obsolete Smartphone Screens in Indoor Settings: Characteristics and Human Exposure Risk

Liquid crystal monomers (LCMs) have been found to accumulate in indoor environments, but the emission kinetics of LCMs from electronic devices are not well understood. Leakage from damaged liquid crystal displays may be an important mechanism for LCMs to enter the environment and become potential health hazards to humans. To address this issue, we conducted chamber experiments to characterize the emissions of LCMs from obsolete smartphone screens and estimated the doses of residential and occupational exposures to LCMs. The emission rates of the detected LCMs were in the ranges of 0.1-7 μg m^-2 h^-1 at 80 °C, 0.05-7 μg m^-2 h^-1 at 60 °C, and 0.002-0.2 μg m^-2 h^-1 at 25 °C. Liquid crystal monomers with large molecular weights and low volatilities tended to accumulate at screen surfaces and were re-emitted at elevated temperatures, leading to high emission rates of heavy LCMs upon thermal treatment. The estimated doses of residential and occupational exposures to individual LCMs were 0.0001-0.009 and 0.007-2 ng kg^-1 d^-1, respectively. As LCMs are potentially carcinogenic based on in silico assessments, LCMs emitted from obsolete smartphones in indoor settings may become human health hazards.

Exposure to polystyrene microplastics reduces regeneration and growth in planarians

The potential adverse effects of microplastics (MPs) on ecosystems and human health have received much attention in recent years. However, only limited data are available on the mechanisms for the uptake, distribution, and effects of MPs in freshwater organisms, especially with respect to tissue repair, regeneration and impairment of stem cell functions. To address this knowledge gap, we conducted exposure experiments in which planarians (Dugesia japonica) were exposed to polystyrene (PS)-MPs mixed in liver homogenate and examined the tissue growth and regeneration, stem cell functions, and oxidative stress. The body and blastema areas decreased upon exposure to PS-MPs, indicating that the growth and regeneration of planarians were delayed. The proliferation and differentiation processes of stem cells were inhibited, and the proportion of mitotic stem cells decreased, which may be related to the activation of the TGFβ/SMAD4 and Notch signaling pathways. The enhancement of antioxidant enzyme activities and malondialdehyde on the first day of exposure to PS-MPs confirmed the oxidative stress response of planarians to PS-MPs. The present study demonstrated the likelihood of biotoxicity induced by PS-MPs. These results will provide clues for further investigations into the potential risks of PS-MPs to human stem cells.

Use of glioma to assess the distribution patterns of perfluoroalkyl and polyfluoroalkyl substances in human brain

Human brain has a complex structure and is able to perform powerful functions. Blood-brain barrier blocks the entry of foreign substances and maintains the homeostasis of the brain. However, some exogenous substances are still able to pass through the blood-brain barrier, with distribution patterns yet to be clarified. Perfluoroalkyl and polyfluoroalkyl substances (PFASs), including perfluoroalkyl carboxylic acids (PFCAs), perfluoroalkyl sulfonic acids (PFSAs), a precursor (perfluorooctane sulfonamide that can be degraded to other substances), and emerging PFASs, were analyzed for the first time in living human brain glioma. The target compounds were detected and quantified in 25 out of 26 glioma samples. The concentration range of ∑PFAS was < RL-51 ng g^-1 wet weight (applied to all reported concentrations), with a median of 2.9 ng g^-1. The most abundant compound was PFCAs (40%), followed by PFSAs (28%), emerging PFASs (22%), and perfluorooctane sulfonamide (10%). Abundant alternatives PFASs, including short-chain PFCAs, short-chain PFSAs, and emerging PFASs (52% of ∑PFAS), were found in the glioma samples, supporting the notion that low molecular weight exogenous compounds have high permeability to cross the blood-brain barrier and accumulate in brain tissue. Gender difference was not significant (p > 0.05) in the concentrations of PFASs in the glioma samples. Concentrations of PFASs increased with increasing age, from 0.61 ng g^-1 (0-14 years old) to 1.6 ng g^-1 (>48 years old), with no significant linear correlation with age. The present study suggested that glioma is an effective indicator for monitoring exogenous contaminants in brain tissues.

Effects of biofouling on the uptake of perfluorinated alkyl acids by organic-diffusive gradients in thin films passive samplers

While organic-diffusive gradients in thin films (o-DGT) passive samplers have been used to assess organic contaminants in water, the effects of biofouling on accurate analyte quantification by o-DGT are poorly understood. We evaluated the effects of biofouling on the uptake of six common perfluoroalkyl substances (PFAS) using a previously developed polyacrylamide-WAX (weak anion exchange) o-DGT without a filter membrane. Linear uptake (R² > 0.91) over 21 days was observed in fouled samplers. The measured sampling rates (R_s) and accumulated masses of PFAS in pre-fouled o-DGT were significantly lower (p < 0.05, 20-39% relative error) than in control-fouled samplers. However, compared to clean o-DGT (no biofouling), the R_s of most PFAS in control-fouled samplers (i.e., those with clean diffusive and binding gels initially) were not affected by biofouling. Under flowing (∼5.8 cm s^-1) and static conditions, the measured diffusive boundary layer (DBL) thicknesses for clean o-DGT were 0.016 and 0.082 cm, respectively, whereas the effective in situ biofilm thicknesses for fouled o-DGT were 0.018 and 0.14 cm, respectively. These results suggest that biofilm growth does not have significant effects on target PFAS sampling by o-DGT under typical flowing conditions (≥2 cm s^-1). However, rapid surface growth of biofilm on o-DGT deployed in quiescent waters over long periods of time may exacerbate the adverse effects of biofilms, necessitating the estimation of biofilm thickness in situ. This study provides new insights for evaluating the capability of o-DGT samplers when biofilm growth can be significant.

Microplastics: A review of analytical methods, occurrence and characteristics in food, and potential toxicities to biota

Microplastics (MPs) are ubiquitous in various environment compartments, including food. Here, we collected research reports of MPs in food published during 2010-2020, and summarized the analytical methods developed and utilized by researchers (e.g., digestion, separation and identification, as well as related QA/QC measures implemented), the occurrence, and the characteristics of MPs in six kinds of food. The potential effects on biota from exposure to MPs were also reviewed. The results showed that most researchers digested food samples using chemical solutions such as HNO₃, H₂O₂, KOH, or NaOH. FT-IR and Raman spectroscopy were the main technique for identifying MPs, and microscopes were used to count MP particles. The abundances MPs were in the ranges of 0-5860, 2.00-1100, 0-698, 4.00-18.7, 0-5.68 × 10⁴ and 900-3000 particles/kg in beverages, condiments, honey, meat, seafood and vegetables, respectively. The "maximum" annual human intake of MPs from these foods is approximately 1.42 × 10⁵-1.54 × 10⁵ particles/capita, equivalent to the consumption of 50 plastic bags (size: 0.04 mm × 250 mm × 400 mm, density: 0.98 g/cm³) each year. Blue-colored and fiber-shaped MP particles were the most commonly observed in food, predominated by PA, PE, PES, PET and PP types. Toxicity studies indicated that MPs, additives of MPs and adsorbents or microorganisms on the surfaces of MPs were all somewhat toxic to cells or biota. Exposure to MPs may induce oxidative stress, inflammation, neurotoxicity, and reproductive toxicity, and change the structure of intestinal microflora in cells or biota. Therefore, we call for more investigation into the residual, excretion and bioavailability of MPs or related absorbents/additives in biota and humans.

Significance of biotransformation and excretion on the enantioselective bioaccumulation of hexabromocyclododecane (HBCDD) in laying hens and developing chicken embryos

Although (-)-α-hexabromocyclododecane (HBCDD) and (+)-γ-HBCDD are preferentially enriched in chickens, the key factors contributing to their selective bioaccumulation in hens and their potential biotransformation in developing chicken embryos remain unclear. Herein, in vivo and in ovo exposure experiments using hens and fertilized eggs were conducted to investigate the absorption, excretion, and biotransformation of HBCDDs in chickens. γ-HBCDD (76%) exhibited a higher absorption efficiency than α- (22%) and β- (69%) HBCDDs. However, α-HBCDD was dominant in hen tissues, although γ-HBCDD accounted for >75% in the spiked feed. Moreover, chicken embryos biotransformed approximately 9.5% and 11.7% of absorbed α- and γ-HBCDDs, respectively, implying that diastereomer-selective elimination causes the predominance of α-HBCDD in hens. The concentration and enantiomer fraction (EF) of α-HBCDD in laid eggs were significantly positively correlated, suggesting enantioselective elimination. The EFs of α- and γ-HBCDDs varied between feces from the exposure and depuration periods, indicating the preferred excretion of (+)-α- and (-)-γ-HBCDDs. Furthermore, the enantioselective biotransformation of (-)-γ-HBCDD was confirmed in developing chicken embryos. These results show that excretion and biotransformation contribute to the diastereomer- and enantiomer-selective bioaccumulation of HBCDDs in chickens; The results may improve our understanding of the environmental fate and ecological risks of HBCDDs in biota.

Utility of benzothiazoles as markers of tire-derived inputs to estuarine waters assessed by polyethylene sheets

Tire-derived particles and polyethylene (PE) debris co-exist in estuaries and potentially deteriorate water quality. Chemicals can be emitted from tire-derived particles and resorb to PE debris. However, there was lack of information about the interaction (e.g., sorption and desorption) between tire-derived chemicals and PE debris. By combining batch sorption and desorption experiments along with in situ field deployment of PE sheets, we examined the utility of benzothiazoles (BTZs) sorbed in PE as suitable markers of tire-derived inputs. The sorptive characteristics and PE-water partition coefficients (often designated as K_pew) of selected tire-derived marker candidates, i.e., polycyclic aromatic hydrocarbons (PAHs), benzothiophenes (BTPs) and BTZs, were measured. Moderately polar BTPs and BTZs (except for 2-(4-morpholinyl) benzothiazole) reached equilibrium within 2-8 days, compared to 20 days for nonpolar PAHs. The measure K_pew values and octanol-water partition coefficients of PAHs and BTZs were linearly correlated with each other (r² > 0.80; p < 0.05). The desorption potentiality of PAHs and BTZs from tire particles is consistent with the hydrophilic properties of the target chemicals, while desorption ratios of BTZs and PAHs are 25-87% and <20%, respectively. Samplers with PE sheets as the sorbent phase were deployed in Hailing Bay, an urbanized estuary in South China, to measure concentrations of PAHs, BTPs and BTZs. Benzothiazoles sorbed in PE samples were associated with the massive utilization of automobile tires, while PAHs were linked to the boat maintenance facilities and BTPs were not detected in any tire particle and field PE samples. Therefore sorbed BTZs in PE can potentially serve as chemical markers of tire-derived inputs to estuaries.

Towards a better understanding of deep convolutional neural network processes for recognizing organic chemicals of environmental concern

Deep convolutional neural network (DCNN) has proved to be a promising tool for identifying organic chemicals of environmental concern. However, the uncertainty associated with DCNN predictions remains to be quantified. The training process contains many random configurations, including dataset segmentation, input sequences, and initial weight, etc. Moreover, the DCNN working mechanism is non-linear and opaque. To increase confidence to use this novel approach, persistent, bioaccumulative, and toxic substances (PBTs) were utilized as representative chemicals of environmental concern to estimate the prediction uncertainty under five distinguished datasets and ten different molecular descriptor (MD) arrangements with 111,852 chemicals and 2424 available MDs. An internal correlation coefficient test indicated that the prediction confidence reached 0.98 when a mean of 50 DCNNs' predictions was used instead of a sing DCNN prediction. A threshold for PBT categorization was determined by considering costs between false-negative and false-positive predictions. As revealed by the guided backpropagation-class activation mapping (GBP-CAM) saliency images, only 12% of all selected MDs were activated by DCNN and influenced decision-making process. However, the activated MDs not only varied among chemical classes but also shifted with different DCNNs. Principal component analysis indicated that 2424 MDs could transform into 370 orthogonal variables. Both results suggest that redundancy exists among selected MDs. Yet, DCNN was found to adapt to redundant data by focusing on the most important information for better prediction performance.

Leaching of PBDEs from microplastics under simulated gut conditions: Chemical diffusion and bioaccumulation

Considerable efforts on exposure assessment of microplastics (MPs) as an agent in transport of toxic contaminants have been performed in organisms. However, chemical diffusion of inherent hydrophobic organic contaminants from MPs under simulated gut conditions is poorly examined. The present study examined the transfer kinetics of polybrominated diphenyl ethers (PBDEs) from polystyrene (PS), acrylonitrile butadiene styrene (ABS), and polypropylene (PP) MPs under gut surfactants (sodium taurocholate) at two relevant body temperatures of marine organisms, and evaluated the importance of MP ingestion in bioaccumulation of PBDEs in lugworm by a biodynamic model. Diffusion coefficients of PBDEs range from 5.82 × 10^-23 to 7.96 × 10^-20 m² s^-1 in PS, 5.49 × 10^-23 to 3.45 × 10^-20 m² s^-1 in ABS, and 5.58 × 10^-21 to 5.79 × 10^-17 m² s^-1 in PP, with apparent activation energies in the range of 33-148 kJ mol^-1. The biota-plastic accumulation factors of PBDEs leached from these plastics range from 1.44 × 10^-8 to 7.15 × 10^-5. Although ingestion of MPs with the common size (>0.5 mm) showed the negligible contribution to bioaccumulation of PBDEs in lugworm, their contribution in PBDEs transfer can be increased with gradual breakdown of MPs.

Development and field evaluation of the organic-diffusive gradients in thin-films (o-DGT) passive water sampler for microcystins

The presence of microcystins (MCs) in waterbodies requires a simple and reliable monitoring technique to characterize better their spatiotemporal distribution and ecological risks. An organic-diffusive gradients in thin films (o-DGT) passive sampler based on polyacrylamide diffusive gel and hydrophilic-lipophilic balance (HLB) binding gel was developed for MCs in water. The mass accumulation of three MCs (MC-LR, -RR, and -YR) was linear over 10 days (R² ≥ 0.98). Sampling rates (2.68-3.22 mL d^-1) and diffusion coefficients (0.90-1.08 × 10^-6 cm² s^-1) of three MCs were obtained at 20 °C. Two different passive samplers, o-DGT and the Solid Phase Adsorption Toxin Tracking device (SPATT), were co-deployed to estimate MC levels at three lakes in California, USA. Measured total MC concentrations were up to 10.9 μg L^-1, with MC-LR the primary variant at a measured maximum concentration of 2.74 μg L^-1. Time-weighted average MC concentrations by o-DGT were lower than grab water samples, probably because grab sampling measures both dissolved and particulate phases (i.e., MCs in cyanobacteria). Passive water samplers by design can only measure dissolved-phase MCs, which are considerably less during the cyanobacteria-laden periods observed. Both o-DGT and grab samples gave comparable results for three MC variants at low levels of MCs, e.g., <0.1 μg L^-1. o-DGT showed a higher correlation with grab sampling than SPATT did. This study demonstrates that o-DGT can be effectively used for monitoring and evaluation of dissolved MCs in waters.

Dog poop bags: A non-negligible source of plastic pollution

Plastic pollution derived from the disposal of plastic bags in the environment is clearly evidenced. However, little attention has been directed towards plastic waste derived from plastic dog poop bags (DPBs), which are widely used and can never be recycled. Herein, we raise concerns about the contribution of DPBs to plastic pollution in the environment. Combining the weight of each DPB, the number of bags daily used for a dog, and the number of pet dogs around the world, we estimated the number of annual consumed and disposed DPBs at more than 415 billion, or equivalently 0.76-1.23 million tons of plastics based on various weights of different DPBs. Although plastic waste produced by DPBs only accounts for a small fraction (0.6%) of the total plastic waste generation, the extremely short life cycle of DPBs has made them a non-negligible source of plastic pollution in the environment.

A Novel Personal Passive Sampler for Collecting Gaseous Phthalates

Dermal absorption of gaseous chemicals is an important contributor to increased health risk and has yet to be adequately addressed due to the lack of available sampling techniques. In the present study, a novel personal passive sampler consisting of a housing (embracing a polydimethylsiloxane (PDMS) disk as the sorbent phase, a membrane filter, and a stainless-steel mesh) and a watchband (traditional wristband) was constructed and used to characterize gaseous phthalates (PAEs) near the air-skin interface. In a real-life setting, the utility of the passive sampler was validated by comparing the composition profiles of PAEs in the PDMS disks and in active samples and watchbands. The compositions of PAEs were consistent in disks and gaseous constituents from ambient air, with low-molecular-weight (<306 g mol^-1) PAEs accounting for 87-100% and approximately 100%, respectively. Appreciable amounts of diisononyl phthalate, diisodecyl phthalate, dinonyl phthalate, and skin lipid (e.g., squalene) were detected in watchbands but not in disks. Apparently, the passive sampler can prevent particles and skin-related chemicals from adhering to the disk and collect gaseous PAEs only. The vast majority of PAEs in watchbands was associated with nongaseous constituents. The present study demonstrated that the sampling strategy is a key factor in exposure assessment.

Development of an in vitro model to simulate migration of organic contaminants from pad products to human sweat and enhance dermal exposure risk assessment

Dermal sorption is an important route for human exposure to organic chemicals embedded in consumer products, but the related chemical migration from consumer products to sweats was often overlooked in assessing skin exposure risk. To address this issue, the present study selected polycyclic aromatic hydrocarbons (PAHs), phthalic acid esters (PAEs), and benzothiazoles (BTs) as the target compounds and developed an in vitro simulation model with two artificial sweats (i.e., acidic and alkaline), a sorbent, and a PVC standard material. An appropriate biological inhibitor (ampicillin) and incubation time of 20 d for assessing the maximum migration efficiency of chemicals were selected. The mass balance of the target compounds during the in vitro incubation was verified. The established in vitro simulation model was used to determine the migration ratios of PAEs and BTs in three types of mouse pads. The maximum migration ratios of DBP, DIBP, DEHP, and BT from leather pad to both sweats were less than those for silicone and rubber pads. Key controlling parameters in migration ratios should be examined in subsequent investigations. Risk assessment showed that the daily exposure doses of PAEs and BTs in mouse pads were higher than the literature data. The hazard index of PAEs in leather pad exceed 1, indicating that PAEs could induce non-carcinogenic effects to human health through hand contact. Overall, the established in vitro simulation model provides a feasible alternative for assessing the potential risk for dermal exposure to consumer products.

Measurement of octanol-air partition coefficients for liquid crystals based on gas chromatography-retention time and its implication in predicting long-range transport potential

Liquid crystals (LCs) are widely used in the modern society, but their environmental fate and related human health effects remain inadequately recognized. To assist in better understanding the environmental fate of LCs, the octanol-air partition coefficients (K_OA) of 21 target LCs were determined with a gas chromatography-retention time (GC-RT) approach. Four classes of traditional organic pollutants, including polycyclic aromatic hydrocarbons, organochlorides, polybrominated diphenyl ethers, and polychlorinated biphenyls were employed as reference or calibration compounds. Cluster analysis indicated that the reference and calibration compounds somewhat influenced the relative and absolute magnitudes of GC-RT results. A quantitative structure-property relationship (QSPR) model was constructed from the experimental results and outperformed a widely-used model, KOAWIN, in estimating log K_OA of LCs. This model was used to predict log K_OAs for 116 LCs with the same element compositions and similar structures as the target LCs. Overall persistence and long-range transport potential were predicted based on the measured and estimated log K_OA values, yielding consistent results. Several LCs were shown to have comparable characteristic travel distances and transport efficiencies as the traditional organic pollutants, suggesting they are potential environmental pollutants and the QSPR model is applicable in predicting the environmental fate of LCs.

DNA oxidative damage in pregnant women upon exposure to conventional and alternative phthalates

Exposure to alternative phthalates and related health effects in pregnant women are rarely reported. Nineteen phthalate metabolites and a DNA oxidative damage biomarker 8-hydroxy-2'-deoxyguanosine (8-OHdG) were determined in urine samples of pregnant women recruited in South China. The detection frequencies and concentration of selected alternative phthalates, i.e., diisononyl phthalate (DiNP), diisodecyl phthalate (DiDP) and di-(2-propylheptyl) phthalate (DPHP) were lower than those of conventional phthalates. However, mono-(6-hydroxy-2-propylheptyl) phthalate, a metabolite of DPHP, was detected in 70% of urine samples (median: 0.13 ng/mL). The estimated daily intakes of conventional plasticizers, including dimethyl phthalate, di-n-butyl phthalate, diisobutyl phthalate and di-(2-ethylhexyl) phthalate (median range: 1.0-3.0 μg/kg_bw/day) were significantly higher than those of DiNP (0.08 μg/kg_bw/day) and DPHP (0.03 μg/kg_bw/day) (p < 0.05). Approximately 24% of pregnant women were at high risk when cumulative risk from exposure to several phthalates was considered. The concentrations of phthalate metabolites and urinary 8-OHdG were significantly correlated with each other (r = 0.206-0.772, p < 0.01), which were further conformed by multiple linear regression analysis (β = 0.168-0.639, p < 0.01). In addition, conventional phthalates were more strongly correlated with 8-OHdG than alternative phthalates (i.e., DiNP, DPHP), partly suggesting the relatively smaller health effects of alternatives due to their low exposure doses and toxicities. These findings suggested that alternative phthalates have entered the human body from consumer products in the study area, and exposure-related risk of DNA oxidative stress was comparatively lower.