Trilayered biomimetic hydrogel scaffolds with dual-differential microenvironment for articular osteochondral defect repair

Commonly, articular osteochondral tissue exists significant differences in physiological architecture, mechanical function, and biological microenvironment. However, the development of biomimetic scaffolds incorporating upper cartilage, middle tidemark-like, and lower subchondral bone layers for precise articular osteochondral repair remains elusive. This study proposed here a novel strategy to construct the trilayered biomimetic hydrogel scaffolds with dual-differential microenvironment of both mechanical and biological factors. The cartilage-specific microenvironment was achieved through the grafting of kartogenin (KGN) into gelatin via p-hydroxyphenylpropionic acid (HPA)-based enzyme crosslinking reaction as the upper cartilage layer. The bone-specific microenvironment was achieved through the grafting of atorvastatin (AT) into gelatin via dual-crosslinked network of both HP-based enzyme crosslinking and glycidyl methacrylate (GMA)-based photo-crosslinking reactions as the lower subchondral bone layer. The introduction of tidemark-like middle layer is conducive to the formation of well-defined cartilage-bone integrated architecture. The in vitro experiments demonstrated the significant mechanical difference of three layers, successful grafting of drugs, good cytocompatibility and tissue-specific induced function. The results of in vivo experiments also confirmed the mechanical difference of the trilayered bionic scaffold and the ability of inducing osteogenesis and chondrogenesis. Furthermore, the articular osteochondral defects were successfully repaired using the trilayered biomimetic hydrogel scaffolds by the activation of endogenous recovery, which offers a promising alternative for future clinical treatment.

Memristor-Based Bionic Tactile Devices: Opening the Door for Next-Generation Artificial Intelligence

Bioinspired tactile devices can effectively mimic and reproduce the functions of the human tactile system, presenting significant potential in the field of next-generation wearable electronics. In particular, memristor-based bionic tactile devices have attracted considerable attention due to their exceptional characteristics of high flexibility, low power consumption, and adaptability. These devices provide advanced wearability and high-precision tactile sensing capabilities, thus emerging as an important research area within bioinspired electronics. This paper delves into the integration of memristors with other sensing and controlling systems and offers a comprehensive analysis of the recent research advancements in memristor-based bionic tactile devices. These advancements incorporate artificial nociceptors and flexible electronic skin (e-skin) into the category of bio-inspired sensors equipped with capabilities for sensing, processing, and responding to stimuli, which are expected to catalyze revolutionary changes in human-computer interaction. Finally, this review discusses the challenges faced by memristor-based bionic tactile devices in terms of material selection, structural design, and sensor signal processing for the development of artificial intelligence. Additionally, it also outlines future research directions and application prospects of these devices, while proposing feasible solutions to address the identified challenges.

Association between dietary fatty acids and urinary incontinence

Background

Dietary nutrient intake contributes to urination; however, the association between dietary nutrient intake, especially that of fat, and urinary incontinence (UI) is not well understood. The most common types of UI include stress UI (SUI) and urgency UI (UUI).

Objective

To investigate the potential effect(s) of dietary fat intake on UI and explore its mechanism of action in relation to body mass index (BMI).

Methods

A cross-sectional survey of data from 15,121 individuals (20-85 years of age) from the National Health and Nutrition Examination Survey (2001-2008), a random population-based sample, was performed. Data regarding dietary nutrient intake were collected through 24 h dietary recall interviews. UI and covariate data were collected through in-person interviews. UI was assessed according to the American Urological Association Symptom Index. The odds ratio (OR) for SUI and UUI were calculated using multivariate logistic regression analysis. The mediation effect was estimated using observational mediation analysis.

Results

Higher total fat intake was positively associated with increased odds for developing UI (OR 1.44 [95% confidence interval (CI) 1.08-1.93]). Females who consumed more saturated fatty acids (SFA), monounsaturated fatty acids (MUFA), and polyunsaturated fatty acids (PUFA) were more likely to develop SUI. BMI partially explained the association between total fat, SFA, MUFA, and PUFA and SUI; the proportions of the mediation effect of BMI were 14.7%, 13.0%, 18.7%, and 16.3%, respectively.

Conclusions

Results of this study emphasize the key role of dietary fat intake in the prevalence of UI. Higher fat intake was positively associated with UI and BMI partially mediated the effect of fat intake on SUI.

Memristor-Based Neuromorphic Chips

In the era of information, characterized by an exponential growth in data volume and an escalating level of data abstraction, there has been a substantial focus on brain-like chips, which are known for their robust processing power and energy-efficient operation. Memristors are widely acknowledged as the optimal electronic devices for the realization of neuromorphic computing, due to their innate ability to emulate the interconnection and information transfer processes witnessed among neurons. This review paper focuses on memristor-based neuromorphic chips, which provide an extensive description of the working principle and characteristic features of memristors, along with their applications in the realm of neuromorphic chips. Subsequently, a thorough discussion of the memristor array, which serves as the pivotal component of the neuromorphic chip, as well as an examination of the present mainstream neural networks, is delved. Furthermore, the design of the neuromorphic chip is categorized into three crucial sections, including synapse-neuron cores, networks on chip (NoC), and neural network design. Finally, the key performance metrics of the chip is highlighted, as well as the key metrics related to the memristor devices are employed to realize both the synaptic and neuronal components.

An Encapsulation-Free and Hierarchical Porous Triboelectric Scaffold with Dynamic Hydrophilicity for Efficient Cartilage Regeneration

Tissue engineering and electrotherapy are two promising methods to promote tissue repair. However, their integration remains an underexplored area, because their requirements on devices are usually distinct. Triboelectric nanogenerators (TENGs) have shown great potential to develop self-powered devices. However, due to their susceptibility to moisture, TENGs have to be encapsulated in vivo. Therefore, existing TENGs cannot be employed as tissue engineering scaffolds, which require direct interaction with surrounding cells. Here, the concept of triboelectric scaffolds (TESs) is proposed. Poly(glycerol sebacate), a biodegradable and relatively hydrophobic elastomer, is selected as the matrix of TESs. Each hydrophobic micropore in multi-hierarchical porous TESs efficiently serves as a moisture-resistant working unit of TENGs. Integration of tons of micropores ensures the electrotherapy ability of TESs in vivo without encapsulation. Originally hydrophobic TESs are degraded by surface erosion and transformed into hydrophilic surfaces, facilitating their role as tissue engineering scaffolds. Notably, TESs seeded with chondrocytes obtain dense and large matured cartilages after subcutaneous implantation in nude mice. Importantly, rabbits with osteochondral defects receiving TES implantation show favorable hyaline cartilage regeneration and complete cartilage healing. This work provides a promising electronic biomedical device and will inspire a series of new in vivo applications.

Tolerant and Rapid Endochondral Bone Regeneration Using Framework-Enhanced 3D Biomineralized Matrix Hydrogels

Tissue-engineered bone has emerged as a promising alternative for bone defect repair due to the advantages of regenerative bone healing and physiological functional reconstruction. However, there is very limited breakthrough in achieving favorable bone regeneration due to the harsh osteogenic microenvironment after bone injury, especially the avascular and hypoxic conditions. Inspired by the bone developmental mode of endochondral ossification, a novel strategy is proposed for tolerant and rapid endochondral bone regeneration using framework-enhanced 3D biomineralized matrix hydrogels. First, it is meticulously designed 3D biomimetic hydrogels with both hypoxic and osteoinductive microenvironment, and then integrated 3D-printed polycaprolactone framework to improve their mechanical strength and structural fidelity. The inherent hypoxic 3D matrix microenvironment effectively activates bone marrow mesenchymal stem cells self-regulation for early-stage chondrogenesis via TGFβ/Smad signaling pathway due to the obstacle of aerobic respiration. Meanwhile, the strong biomineralized microenvironment, created by a hybrid formulation of native-constitute osteogenic inorganic salts, can synergistically regulate both bone mineralization and osteoclastic differentiation, and thus accelerate the late-stage bone maturation. Furthermore, both in vivo ectopic osteogenesis and in situ skull defect repair successfully verified the high efficiency and mechanical maintenance of endochondral bone regeneration mode, which offers a promising treatment for craniofacial bone defect repair.

General requirements for the production of extracellular vesicles derived from human stem cells

'General requirements for the production of extracellular vesicles derived from human stem cells' is the first guideline for stem cells derived extracellular vesicles in China, jointly drafted and agreed upon by experts from the Chinese Society for Stem Cell Research. This standard specifies the general requirements, process requirements, packaging and labelling requirements and storage requirements for preparing extracellular vesicles derived from human stem cells, which is applicable to the research and production of extracellular vesicles derived from stem cells. It was originally released by the China Society for Cell Biology on 30 August 2022. We hope that the publication of this guideline will promote institutional establishment, acceptance and execution of proper protocols, and accelerate the international standardisation of extracellular vesicles derived from human stem cells.

Enhancing cartilage regeneration and repair through bioactive and biomechanical modification of 3D acellular dermal matrix

Acellular dermal matrix (ADM) shows promise for cartilage regeneration and repair. However, an effective decellularization technique that removes cellular components while preserving the extracellular matrix, the transformation of 2D-ADM into a suitable 3D scaffold with porosity and the enhancement of bioactive and biomechanical properties in the 3D-ADM scaffold are yet to be fully addressed. In this study, we present an innovative decellularization method involving 0.125% trypsin and 0.5% SDS and a 1% Triton X-100 solution for preparing ADM and converting 2D-ADM into 3D-ADM scaffolds. These scaffolds exhibit favorable physicochemical properties, exceptional biocompatibility and significant potential for driving cartilage regeneration in vitro and in vivo. To further enhance the cartilage regeneration potential of 3D-ADM scaffolds, we incorporated porcine-derived small intestinal submucosa (SIS) for bioactivity and calcium sulfate hemihydrate (CSH) for biomechanical reinforcement. The resulting 3D-ADM+SIS scaffolds displayed heightened biological activity, while the 3D-ADM+CSH scaffolds notably bolstered biomechanical strength. Both scaffold types showed promise for cartilage regeneration and repair in vitro and in vivo, with considerable improvements observed in repairing cartilage defects within a rabbit articular cartilage model. In summary, this research introduces a versatile 3D-ADM scaffold with customizable bioactive and biomechanical properties, poised to revolutionize the field of cartilage regeneration.

Instant trachea reconstruction using 3D-bioprinted C-shape biomimetic trachea based on tissue-specific matrix hydrogels

Currently, 3D-bioprinting technique has emerged as a promising strategy to offer native-like tracheal substitutes for segmental trachea reconstruction. However, there has been very limited breakthrough in tracheal repair using 3D-bioprinted biomimetic trachea owing to the lack of ideal bioinks, the requirement for precise structural biomimicking, and the complexity of multi-step surgical procedures by mean of intramuscular pre-implantation. Herein, we propose a one-step surgical technique, namely direct end-to-end anastomosis using C-shape 3D-bioprinted biomimetic trachea, for segmental trachea defect repair. First, two types of tissue-specific matrix hydrogels were exploited to provide mechanical and biological microenvironment conducive to the specific growth ways of cartilage and fibrous tissue respectively. In contrast to our previous O-shape tracheal design, the tubular structure of alternating C-shape cartilage rings and connecting vascularized-fibrous-tissue rings was meticulously designed for rapid 3D-bioprinting of tracheal constructs with optimal printing paths and models. Furthermore, in vivo trachea regeneration in nude mice showed satisfactory mechanical adaptability and efficient physiological regeneration. Finally, in situ segmental trachea reconstruction by direct end-to-end anastomosis in rabbits was successfully achieved using 3D-bioprinted C-shape biomimetic trachea. This study demonstrates the potential of advanced 3D-bioprinting for instant and efficient repair of segmental trachea defects.

Comparative Study of the Structure and Height of CH4 Laminar Diffusion Flames: Effects of Fuel-Side versus Air-Side Dilution

The strategy for introducing diluents is a critical practical concern in diluted combustion; however, a comprehensive understanding of the effects of fuel-side dilution versus air-side dilution is currently lacking. This numerical investigation systematically studied the effects of dilution strategies on methane coflow diffusion flames, with a focus on the flame structure and flame length. Common additives in practical combustion, specifically H2O and CO2, were introduced to either the fuel or the air streams, with dilution ratios (Z) ranging from 0 to 0.2, and the impacts of four dilution strategies were quantified and ranked. Detailed simulations were conducted using a well-validated two-dimensional (2D) flame code to gain a deep understanding of OH formation, flame attachment, temperature of the burner nozzle, and flame height. Systematic analyses in terms of heat transfer, molecular diffusion, and chemical kinetics were conducted. Results demonstrate that introducing diluents into the air stream exerts a more profound influence on suppressing OH formation compared with fuel-side dilution. Moreover, air-side dilution has a negligible influence on flame attachment, while increasing Z on fuel side significantly inhibits flame attachment, and the latter behavior is attributed to the diminished mass diffusion of CH4 toward the oxidizer side. As the flame attachment weakens, it causes a consequential reduction in heat transfer from the flame base to the burner. Accordingly, the nozzle temperature exhibits a more remarkable decrease with the fuel-side dilution ratio than with the air-side dilution ratio. Simultaneously, a more profound influence of Z on flame length was observed for fuel-side dilution than for air-side dilution, and the underlying mechanisms governing these two distinct dilution strategies were theoretically elucidated.

Memristor-Based Artificial Chips

Memristors, promising nanoelectronic devices with in-memory resistive switching behavior that is assembled with a physically integrated core processing unit (CPU) and memory unit and even possesses highly possible multistate electrical behavior, could avoid the von Neumann bottleneck of traditional computing devices and show a highly efficient ability of parallel computation and high information storage. These advantages position them as potential candidates for future data-centric computing requirements and add remarkable vigor to the research of next-generation artificial intelligence (AI) systems, particularly those that involve brain-like intelligence applications. This work provides an overview of the evolution of memristor-based devices, from their initial use in creating artificial synapses and neural networks to their application in developing advanced AI systems and brain-like chips. It offers a broad perspective of the key device primitives enabling their special applications from the view of materials, nanostructure, and mechanism models. We highlight these demonstrations of memristor-based nanoelectronic devices that have potential for use in the field of brain-like AI, point out the existing challenges of memristor-based nanodevices toward brain-like chips, and propose the guiding principle and promising outlook for future device promotion and system optimization in the biomedical AI field.

Subcutaneously Engineered Decalcified Bone Matrix Xenografts Promote Bone Repair by Regulating the Immune Microenvironment, Prevascularization, and Stem Cell Homing

Immunoregulatory and vascularized microenvironments play an important role in bone regeneration; however, the precise regulation for vascularization and inflammatory reactions remains elusive during bone repair. In this study, by means of subcutaneous preimplantation, we successfully constructed demineralized bone matrix (DBM) grafts with immunoregulatory and vascularized microenvironments. According to the current results, at the early time points (days 1 and 3), subcutaneously implanted DBM grafts recruited a large number of pro-inflammatory M1 macrophages with positive expression of CD68 and iNOS, while at the later time points (days 7 and 14), these inflammatory cells gradually subsided, accompanying increased presence of anti-inflammatory M2 macrophages with positive expression of CD206 and Arg-1, indicating a gradually enhanced anti-inflammatory microenvironment. At the same time, the gradually increased angiogenesis was observed in the DBM grafts with implantation time. In addition, the positive cells of CD105, CD73, and CD90 were observed in the inner region of the DBM grafts, implying the homing of mesenchymal stem cells. The repair results of cranial bone defects in a rat model further confirmed that the subcutaneous DBM xenografts at 7 days significantly improved bone regeneration. In summary, we developed a simple and novel strategy for bone regeneration mediated by anti-inflammatory microenvironment, prevascularization, and endogenous stem cell homing.

Comparison of Pulmonary and Extrapulmonary Models of Sepsis-Associated Acute Lung Injury

To compare different rat models of sepsis at different time points, based on pulmonary or extrapulmonary injury mechanisms, to identify a model which is more stable and reproducible to cause sepsis-associated acute lung injury (ALI). Adult male Sprague-Dawley rats were subjected to (1) cecal ligation and puncture (CLP) with single (CLP1 group) or two repeated through-and-through punctures (CLP2 group); (2) tail vein injection with lipopolysaccharide (LPS) of 10mg/kg (IV-LPS10 group) or 20 mg/kg (IV-LPS20 group); (3) intratracheal instillation with LPS of 10mg/kg (IT-LPS10 group) or 20mg/kg (IT-LPS20 group). Each of the model groups had a sham group. 7-day survival rates of each group were observed (n=15 for each group). Moreover, three time points were set for additional experimental studying in each model group: 4 hours, 24 hours and 48 hours after modeling (every time point, n=8 for each group). Rats were sacrificed to collect BALF and lung tissue samples at different time points for detection of IL-6, TNF-alpha, total protein concentration in BALF and MPO activity, HMGB1 protein expression in lung tissues, as well as the histopathological changes of lung tissues. More than 50 % of the rats died within 7 days in each model group, except for the IT-LPS10 group. In contrast, the mortality rates in the two IV-LPS groups as well as the IT-LPS20 group were significantly higher than that in IT-LPS10 group. Rats received LPS by intratracheal instillation exhibited evident histopathological changes and inflammatory exudation in the lung, but there was no evidence of lung injury in CLP and IV-LPS groups. Rat model of intratracheal instillation with LPS proved to be a more stable and reproducible animal model to cause sepsis-associated ALI than the extrapulmonary models of sepsis.

Full hardware implementation of neuromorphic visual system based on multimodal optoelectronic resistive memory arrays for versatile image processing

In-sensor and near-sensor computing are becoming the next-generation computing paradigm for high-density and low-power sensory processing. To fulfil a high-density and efficient neuromorphic visual system with fully hierarchical emulation of the retina and visual cortex, emerging multimodal neuromorphic devices for multi-stage processing and a fully hardware-implemented system with versatile image processing functions are still lacking and highly desirable. Here we demonstrate an emerging multimodal-multifunctional resistive random-access memory (RRAM) device array based on modified silk fibroin protein (MSFP), exhibiting both optoelectronic RRAM (ORRAM) mode featured by unique negative and positive photoconductance memory and electrical RRAM (ERRAM) mode featured by analogue resistive switching. A full hardware implementation of the artificial visual system with versatile image processing functions is realised for the first time, including ORRAM mode array for the in-sensor image pre-processing (contrast enhancement, background denoising, feature extraction) and ERRAM mode array for near-sensor high-level image recognition, which hugely improves the integration density, and simply the circuit design and the fabrication and integration complexity.

Type I collagen and fibromodulin enhance the tenogenic phenotype of hASCs and their potential for tendon regeneration

Our previous work demonstrated the tendon-derived extracellular matrix (ECM) extracts as vital niches to specifically direct mesenchymal stem cells towards tenogenic differentiation. This study aims to further define the effective ECM molecules capable of teno-lineage induction on human adipose-derived stem cells (hASCs) and test their function for tendon engineering. By detecting the teno-markers expression levels in hASCs exposed to various substrate coatings, collagen I (COL1) and fibromodulin (FMOD) were identified to be the key molecules as a combination and further employed to the modification of poly(L-lactide-co-ε-caprolactone) electrospun nanoyarns, which showed advantages in inducting seeded hASCs for teno-lineage specific differentiation. Under dynamic mechanical loading, modified scaffold seeded with hASCs formed neo-tendon in vitro at the histological level and formed better tendon tissue in vivo with mature histology and enhanced mechanical properties. Primary mechanistic investigation with RNA sequencing demonstrated that the inductive mechanism of these two molecules for hASCs tenogenic differentiation was directly correlated with positive regulation of peptidase activity, regulation of cell-substrate adhesion and regulation of cytoskeletal organization. These biological processes were potentially affected by LOC101929398/has-miR-197-3p/TENM4 ceRNA regulation axis. In summary, COL1 and FMOD in combination are the major bioactive molecules in tendon ECM for likely directing tenogenic phenotype of hASCs and certainly valuable for hASCs-based tendon engineering.

Four-dimensional hydrogel dressing adaptable to the urethral microenvironment for scarless urethral reconstruction

The harsh urethral microenvironment (UME) after trauma severely hinders the current hydrogel-based urethral repair. In fact, four-dimensional (4D) consideration to mimic time-dependent physiological processes is essential for scarless urethral reconstruction, which requires balancing extracellular matrix (ECM) deposition and remodeling at different healing stages. In this study, we develop a UME-adaptable 4D hydrogel dressing to sequentially provide an early-vascularized microenvironment and later-antifibrogenic microenvironment for scarless urethral reconstruction. With the combination of dynamic boronic ester crosslinking and covalent photopolymerization, the resultant gelatin methacryloyl phenylboronic acid/cis-diol-crosslinked (GMPD) hydrogels exhibit mussel-mimetic viscoelasticity, satisfactory adhesion, and acid-reinforced stability, which can adapt to harsh UME. In addition, a temporally on-demand regulatory (TOR) technical platform is introduced into GMPD hydrogels to create a time-dependent 4D microenvironment. As a result, physiological urethral recovery is successfully mimicked by means of an early-vascularized microenvironment to promote wound healing by activating the vascular endothelial growth factor (VEGF) signaling pathway, as well as a later-antifibrogenic microenvironment to prevent hypertrophic scar formation by timing transforming growth factor-β (TGFβ) signaling pathway inhibition. Both in vitro molecular mechanisms of the physiological healing process and in vivo scarless urethral reconstruction in a rabbit model are effectively verified, providing a promising alternative for urethral injury treatment.

Multifunctional calcium polyphenol networks reverse the hostile microenvironment of trauma for preventing postoperative peritoneal adhesions

Abdominal adhesions, a commonly observed complication of abdominal surgery, have a high incidence and adversely affect patients' physical and mental health. The primary causes of abdominal adhesions are intraoperative trauma, acute inflammatory response, bleeding, and foreign body infection. Because most current treatment approaches for abdominal adhesions are limited, improved and novel postoperative anti-adhesion regimens are urgently needed. In this study, we developed calcium polyphenol network (CaPN) microspheres based on the self-assembly of the natural triphenolic compound gallic acid and Ca2+ in solution. The physicochemical properties of CaPNs, including their hemostatic, antibacterial, antioxidant, and anti-inflammatory activities, were investigated in vitro. Bleeding and cecal-abdominal wall adhesion models were established to observe the hemostatic activity of CaPNs and their preventive effect on postoperative abdominal wall adhesion in vivo. The results showed that CaPNs significantly reduced inflammation, oxidative stress, fibrosis, and abdominal adhesion formation and had good hemostatic and antibacterial properties. Our findings suggest a novel strategy for the prevention of postoperative adhesions.

3D Printed Chondrogenic Functionalized PGS Bioactive Scaffold for Cartilage Regeneration

Tissue engineering is emerging as a promising approach for cartilage regeneration and repair. Endowing scaffolds with cartilaginous bioactivity to obtain bionic microenvironment and regulating the matching of scaffold degradation and regeneration play a crucial role in cartilage regeneration. Poly(glycerol sebacate) (PGS) is a representative thermosetting bioelastomer known for its elasticity, biodegradability, and biocompatibility and is widely used in tissue engineering. However, the modification and drug loading of the PGS scaffold is still a key challenge due to its high temperature curing conditions and limited reactive groups, which seriously hinders its further functional application. Here, a simple versatile new strategy of super swelling-absorption and cross-linked networks locking is presented to successfully create the 3D printed PGS-CS/Gel scaffold for the first time based on FDA-approved PGS, gelatin (Gel) and chondroitin sulfate (CS). The PGS-CS/Gel scaffold exhibits the desirable synergistic properties of well-organized hierarchical structures, excellent elasticity, improved hydrophilicity, and cartilaginous bioactivity, which can promote the adhesion, proliferation, and migration of chondrocytes. Importantly, the rate of cartilage regeneration can be well-matched with degradation of PGS-CS/Gel scaffold, and achieve uniform and mature cartilage tissue without scaffold residual. The bioactive scaffold can successfully repair cartilage in a rabbit trochlear groove defect model indicating a promising prospect of clinical transformation.

Construction of three-dimensional, homogeneous regenerative cartilage tissue based on the ECG-DBM complex

Introduction: The feasibility of using a steel decalcified bone matrix (DBM)-reinforced concrete engineered cartilage gel (ECG) model concept for in vivo cartilage regeneration has been demonstrated in preliminary experiments. However, the regenerated cartilage tissue contained an immature part in the center. The present study aimed to achieve more homogeneous regenerated cartilage based on the same model concept. Methods: For this, we optimized the culture conditions for the engineered cartilage gel-decalcified bone matrix (ECG-DBM) complex based on the previous model and systematically compared the in vitro chondrogenic abilities of ECG in the cartilage slice and ECG-DBM complex states. We then compared the in vivo cartilage regeneration effects of the ECG-DBM complex with those of an equivalent volume of ECG and an equivalent ECG content. Results and discussion: Significant increases in the DNA content and cartilage-specific matrix content were observed for the ECG-DBM complex compared with the ECG cartilage slice, suggesting that the DBM scaffold significantly improved the quality of ECG-derived cartilage regeneration in vitro. In the in vivo experiments, high-quality cartilage tissue was regenerated in all groups at 8 weeks, and the regenerated cartilage exhibited typical cartilage lacunae and cartilage-specific extracellular matrix deposition. Quantitative analysis revealed a higher chondrogenic efficiency in the ECG-DBM group. Specifically, the ECG-DBM complex achieved more homogeneous and stable regenerated cartilage than an equivalent volume of ECG and more mature regenerated cartilage than an equivalent ECG content. Compared with ECG overall, ECG-DBM had a more controllable shape, good morphology retention, moderate mechanical strength, and high cartilage regeneration efficiency. Further evaluation of the ECG-DBM complex after in vitro culture for 7 and 14 days confirmed that an extended in vitro preculture facilitated more homogeneous cartilage regeneration.

Chondrogenic medium in combination with a c-Jun N-terminal kinase inhibitor mediates engineered cartilage regeneration by regulating matrix metabolism and cell proliferation

Cartilage tissue engineering is a promising strategy for repairing cartilage defects. However, achieving satisfactory cartilage regeneration in vitro and maintaining its stability in vivo remains a challenge. The key to achieving this goal is establishing an efficient cartilage regeneration culture system to retain sufficient active cells with physiological functions, generate abundant cartilage extracellular matrix (ECM) and maintain a low level of cartilage ECM degradation. The current chondrogenic medium (CM) can effectively promote cartilage ECM production; however, it has a negative effect on cell proliferation. Meanwhile, the specific c-Jun N-terminal kinase pathway inhibitor SP600125 promotes chondrocyte proliferation but inhibits ECM synthesis. Here, we aimed to construct a three-dimensional cartilage regeneration model using a polyglycolic acid/polylactic acid scaffold in combination with chondrocytes to investigate the effect of different culture modes with CM and SP600125 on in vitro cartilage regeneration and their long-term outcomes in vivo systematically. Our results demonstrate that the long-term combination of CM and SP600125 made up for each other and maximized their respective advantages to obtain optimal cartilage regeneration in vitro. Moreover, the long-term combination achieved stable cartilage regeneration after implantation in vivo with a relatively low initial cell-seeding concentration. Therefore, the long-term combination of CM and SP600125 enhanced in vitro and in vivo cartilage regeneration stability with fewer initial seeding cells and thus optimized the cartilage regeneration culture system.

Gelatin-modified 3D printed PGS elastic hierarchical porous scaffold for cartilage regeneration

Regenerative cartilage replacements are increasingly required in clinical settings for various defect repairs, including bronchial cartilage deficiency, articular cartilage injury, and microtia reconstruction. Poly (glycerol sebacate) (PGS) is a widely used bioelastomer that has been developed for various regenerative medicine applications because of its excellent elasticity, biodegradability, and biocompatibility. However, because of inadequate active groups, strong hydrophobicity, and limited ink extrusion accuracy, 3D printed PGS scaffolds may cause insufficient bioactivity, inefficient cell inoculation, and inconsistent cellular composition, which seriously hinders its further cartilage regenerative application. Here, we combined 3D printed PGS frameworks with an encapsulated gelatin hydrogel to fabricate a PGS@Gel composite scaffold. PGS@Gel scaffolds have a controllable porous microstructure, with suitable pore sizes and enhanced hydrophilia, which could significantly promote the cells' penetration and adhesion for efficient chondrocyte inoculation. Furthermore, the outstanding elasticity and fatigue durability of the PGS framework enabled the regenerated cartilage built by the PGS@Gel scaffolds to resist the dynamic in vivo environment and maintain its original morphology. Importantly, PGS@Gel scaffolds increased the rate of cartilage regeneration concurrent with scaffold degradation. The scaffold was gradually degraded and integrated to form uniform, dense, and mature regenerated cartilage tissue with little scaffold residue.

Regeneration of Mechanically Enhanced Tissue-Engineered Cartilage Based on the Decalcified Bone Matrix Framework

Human decalcified bone matrix (HDBM) is a framework with a porous structure and good biocompatibility. Nevertheless, its oversized pores lead to massive cell loss when seeding chondrocytes directly over it. Gelatin (GT) is a type of protein obtained by partial hydrolysis of collagen. The GT scaffold can be prepared from the GT solution through freeze-drying. More importantly, the pore size of the GT scaffold can be controlled by optimizing the concentration of the GT solution. Similarly, when different concentrations of gelatin are combined with HDBM and then freeze-dried, the pore size of the HDBM can be modified to different degrees. In this study, the HDBM framework was modified with 0.3, 0.6, and 0.9%GT, resulting in an improved pore size and adhesion rate. Results showed that the HDBM framework with 0.6%GT (HDBM-0.6%GT) had an average pore size of 200 μm, which was more suitable for chondrocyte seeding. Additionally, our study validated that porcine decalcified bone matrix (PDBM) had a proper pore structure. Chondrocytes were in vitro seeded on the three frameworks for 4 weeks and then implanted in nude mice and autologous goats, respectively. The in vivo cartilage regeneration results showed that HDBM-0.6%GT and PDBM frameworks compensated for the oversized pores of the HDBM framework. Moreover, they showed successfully regenerated more mature cartilage tissue with a certain shape in animals.

Cartilage Regeneration Units Based on Hydrogel Microcarriers for Injectable Cartilage Regeneration in an Autologous Goat Model

Despite numerous studies on tissue-engineered injectable cartilage, it is still difficult to realize stable cartilage formation in preclinical large animal models because of suboptimal biocompatibility, which hinders further application in clinical settings. In this study, we proposed a novel concept of cartilage regeneration units (CRUs) based on hydrogel microcarriers for injectable cartilage regeneration in goats. To achieve this goal, hyaluronic acid (HA) was chosen as the microparticle to integrate gelatin (GT) chemical modification and a freeze-drying technology to create biocompatible and biodegradable HA-GT microcarriers with suitable mechanical strength, uniform particle size, a high swelling ratio, and cell adhesive ability. CRUs were then prepared by seeding goat autologous chondrocytes on the HA-GT microcarriers and culturing in vitro. Compared with traditional injectable cartilage methods, the proposed method forms relatively mature cartilage microtissue in vitro and improves the utilization rate of the culture space to facilitate nutrient exchange, which is necessary for mature and stable cartilage regeneration. Finally, these precultured CRUs were used to successfully regenerate mature cartilage in nude mice and in the nasal dorsum of autologous goats for cartilage filling. This study provides support for the future clinical application of injectable cartilage.

Biodegradable Implants for Internal Fixation of Fractures and Accelerated Bone Regeneration

Bone fractures have always been a burden to patients due to their common occurrence and severe complications. Traditionally, operative treatments have been widely used in the clinic for implanting, despite the fact that they can only achieve bone fixation with limited stability and pose no effect on promoting tissue growth. In addition, the nondegradable implants usually need a secondary surgery for implant removal, otherwise they may block the regeneration of bones resulting in bone nonunion. To overcome the low degradability of implants and avoid multiple surgeries, tissue engineers have investigated various biodegradable materials for bone regeneration, whereas the significance of stability of long-term bone fixation tends to be neglected during this process. Combining the traditional orthopedic implantation surgeries and emerging tissue engineering, we believe that both bone fixation and bone regeneration are indispensable factors for a successful bone repair. Herein, we define such a novel idea as bone regenerative fixation (BRF), which should be the main future development trend of biodegradable materials.

Construction of 3D-Bioprinted cartilage-mimicking substitute based on photo-crosslinkable Wharton's jelly bioinks for full-thickness articular cartilage defect repair

Three-dimensional (3D) bioprinted cartilage-mimicking substitutes for full-thickness articular cartilage defect repair have emerged as alternatives to in situ defect repair models. However, there has been very limited breakthrough in cartilage regeneration based on 3D bioprinting owing to the lack of ideal bioinks with printability, biocompatibility, bioactivity, and suitable physicochemical properties. In contrast to animal-derived natural polymers or acellular matrices, human-derived Wharton's jelly is biocompatible and hypoimmunogenic with an abundant source. Although acellular Wharton's jelly can mimic the chondrogenic microenvironment, it remains challenging to prepare both printable and biologically active bioinks from this material. Here, we firstly prepared methacryloyl-modified acellular Wharton's jelly (AWJMA) using a previously established photo-crosslinking strategy. Subsequently, we combined methacryloyl-modified gelatin with AWJMA to obtain a hybrid hydrogel that exhibited both physicochemical properties and biological activities that were suitable for 3D bioprinting. Moreover, bone marrow mesenchymal stem cell-loaded 3D-bioprinted cartilage-mimicking substitutes had superior advantages for the survival, proliferation, spreading, and chondrogenic differentiation of bone marrow mesenchymal stem cells, which enabled satisfactory repair of a model of full-thickness articular cartilage defect in the rabbit knee joint. The current study provides a novel strategy based on 3D bioprinting of cartilage-mimicking substitutes for full-thickness articular cartilage defect repair.

Memristor-based neural networks: a bridge from device to artificial intelligence

Since the beginning of the 21st century, there is no doubt that the importance of artificial intelligence has been highlighted in many fields, among which the memristor-based artificial neural network technology is expected to break through the limitation of von Neumann so as to realize the replication of the human brain by enabling strong parallel computing ability and efficient data processing and become an important way towards the next generation of artificial intelligence. A new type of nanodevice, namely memristor, which is based on the variability of its resistance value, not only has very important applications in nonvolatile information storage, but also presents obsessive progressiveness in highly integrated circuits, making it one of the most promising circuit components in the post-Moore era. In particular, memristors can effectively simulate neural synapses and build neural networks; thus, they can be applied for the preparation of various artificial intelligence systems. This study reviews the research progress of memristors in artificial neural networks in detail and highlights the structural advantages and frontier applications of neural networks based on memristors. Finally, some urgent problems and challenges in current research are summarized and corresponding solutions and future development trends are put forward.

How final year high school students' depression develop during COVID-19 in China? A latent class growth modeling analysis

Depression increased sharply during the initial months of COVID-19, but how it developed over time is rarely explored, especially for adolescents. The current study measured depression of 605 final year high school students in China over 11 months in 4 waves. The latent growth curve modeling (LGCM) was used to examine overall trends in depression and latent class growth modeling (LCGM) was used to identify potential subgroups of adolescents' depressive trajectories. At the same time, gender, life events, and rumination were included as time-invariant covariates. Overall, the development of depression in the final year of high school students showed a slight downward trend. Meanwhile, the depression trajectories showed heterogeneity, and three categories of depression trajectories were identified, which were low-stable (24.3%), depression-risk (67.9%), and high-stable (7.8%). Neuroticism, rumination, and life events such as punishment and loss were found to significantly predict these trajectories of depression. This study helps to characterize differential depression trajectories among adolescents throughout the COVID-19 pandemic and establish several related predictors of the trajectory of depression.

Nanoparticles that Transcytosed through Cancer Cells Can Elicit Immune Response

Transcytosis is a crucial process that nanomedicines can experience in various delivery stages. However, little was known about whether it endows biofunctions to the nanomedicines. Here, we reported that transporting photodynamic nanoparticles across cancer cells via the endoplasmic reticulum (ER)-Golgi pathway formulated them with abundant neoantigens and damage-associated molecular patterns. The resultant nanoparticles (Tran-NPs) were potent in dendritic cell maturation and T cell activation. Meanwhile, the photodynamic Tran-NPs maintained their primary function of repolarizing immunosuppressive cells. The immune responses were observed in melanoma B16F10 tumor models. Our work suggested that the transcytosis process reprogrammed the nanoparticles with immunological properties, which might shed light on the design of nanomedicines.

A magnetic field controlled memristor towards the design of an implantable detector

Memristors, which combine the behaviors of memory and resistive switching (RS), have a wide application prospect in information processing and artificial neural networks. The RS memory behaviors of memristors are primarily determined by the functional layer materials, device structure, and working conditions. Herein, a CuMnO₂ nanomaterial with the manganese copper ore structure was prepared on a Ti substrate by hydrothermal method, and a memristor with the Ag/CuMnO₂/Ti sandwich structure was developed. The RS memory behavior of the as-prepared memristor can be regulated through a low magnetic field (MF), and thus the resistance value of device shows a multi-level resistance states. Compared with other regulation factors, the MF can remotely adjust and control the RS characteristics of memristor, which is a non-invasive and non-destructive regulatory means. The MF regulated memristor can not only be used for multi-level high-density information storage, but also it can protect the health of special populations by identifying the MF intensity of the surrounding environment. When the device is operated in an MF environment, the change of resistance value of the device in both high resistance state (HRS) and low resistance state (LRS) is mainly attributed to the influence of Loren magnetic force on conductive ions.

In Vivo Stable Allogenic Cartilage Regeneration in a Goat Model Based on Immunoisolation Strategy Using Electrospun Semipermeable Membranes

Tissue engineering is a promising strategy for cartilage defect repair. However, autologous cartilage regeneration is limited by additional trauma to the donor site and a long in vitro culture period. Alternatively, allogenic cartilage regeneration has attracted attention because of the unique advantages of an abundant donor source and immediate supply, but it will cause immune rejection responses (IRRs), especially in immunocompetent large animals. Therefore, a universal technique needs to be established to overcome IRRs for allogenic cartilage regeneration in large animals. In the current study, a hybrid synthetic-natural electrospun thermoplastic polyurethane/gelatin (TPU/GT) semipermeable membrane to explore the feasibility of stable allogenic cartilage regeneration by an immunoisolation strategy is developed. In vitro results demonstrated that the rationally designed electrospun TPU/GT membranes has ideal biocompatibility, semipermeability, and an immunoisolation function. In vivo results further showed that the semipermeable membrane (SPM) efficiently blocked immune cell attack, decreased immune factor production, and cell apoptosis of the regenerated allogenic cartilage. Importantly, TPU/GT-encapsulated cartilage-sheet constructs achieved stable allogeneic cartilage regeneration in a goat model. The current study provides a novel strategy for allogenic cartilage regeneration and supplies a new cartilage donor source to repair various cartilage defects.

Associations of DNA Methylation With Behavioral Problems, Gray Matter Volumes, and Negative Life Events Across Adolescence: Evidence From the Longitudinal IMAGEN Study

BACKGROUND

Negative life events (NLEs) increase the risk for externalizing behaviors (EBs) and internalizing behaviors (IBs) in adolescence and adult psychopathology. DNA methylation associated with behavioral problems may reflect this risk and long-lasting effects of NLEs.

METHODS

To identify consistent associations between blood DNA methylation and EBs or IBs across adolescence, we conducted longitudinal epigenome-wide association studies (EWASs) using data from the IMAGEN cohort, collected at ages 14 and 19 years (n = 506). Significant findings were validated in a separate subsample (n = 823). Methylation risk scores were generated by 10-fold cross-validation and further tested for their associations with gray matter volumes and NLEs.

RESULTS

No significant findings were obtained for the IB-EWAS. The EB-EWAS identified a genome-wide significant locus in a gene linked to attention-deficit/hyperactivity disorder (ADHD) (IQSEC1, cg01460382; p = 1.26 × 10-8). Other most significant CpG sites were near ADHD-related genes and enriched for genes regulating tumor necrosis factor and interferon-γ signaling, highlighting the relevance of EB-EWAS findings for ADHD. Analyses with the EB methylation risk scores suggested that it partly reflected comorbidity with IBs in late adolescence. Specific to EBs, EB methylation risk scores correlated with smaller gray matter volumes in medial orbitofrontal and anterior/middle cingulate cortices, brain regions known to associate with ADHD and conduct problems. Longitudinal mediation analyses indicated that EB-related DNA methylation were more likely the outcomes of problematic behaviors accentuated by NLEs, and less likely the epigenetic bases of such behaviors.

CONCLUSIONS

Our findings suggest that novel epigenetic mechanisms through which NLEs exert short and longer-term effects on behavior may contribute to ADHD.

In-Depth Physical Mechanism Analysis and Wearable Applications of HfOx-Based Flexible Memristors

Since memristors as an emerging nonlinear electronic component have been considered the most promising candidate for integrating nonvolatile memory and advanced computing technology, the in-depth reveal of the memristive mechanism and the realization of hardware fabrication have facilitated their wide applications in next-generation artificial intelligence. Flexible memristors have shown great promising prospects in wearable electronics and artificial electronic skin (e-skin), but in-depth research on the physical mechanism is still lacking. Here, a flexible memristive device with a Ag/HfO_x/Ti/PET crossbar structure was fabricated, and a remarkable analog switching characteristic similar to synaptic behavior was observed. Through detailed data fitting and in-depth physical mechanism analysis, it is confirmed that the analog switching characteristics of the device are mainly caused by carrier tunneling. Furthermore, the memristive properties of the Ag/HfO_x/Ag/PET device can be attributed to the conductive filaments formed by the redox reaction of the active metal Ag. Finally, the interfacial barrier is extracted by the Arrhenius diagram and the energy band diagram, which is drawn to clearly demonstrate the conduction mechanism of charge trapping in the device. Therefore, the HfO_x-based flexible memristor with analog switching behavior and stable memory performance lays the foundation for cutting-edge applications in wearable electronics and smart e-skin.

Regeneration of articular cartilage defects: Therapeutic strategies and perspectives

Articular cartilage (AC), a bone-to-bone protective device made of up to 80% water and populated by only one cell type (i.e. chondrocyte), has limited capacity for regeneration and self-repair after being damaged because of its low cell density, alymphatic and avascular nature. Resulting repair of cartilage defects, such as osteoarthritis (OA), is highly challenging in clinical treatment. Fortunately, the development of tissue engineering provides a promising method for growing cells in cartilage regeneration and repair by using hydrogels or the porous scaffolds. In this paper, we review the therapeutic strategies for AC defects, including current treatment methods, engineering/regenerative strategies, recent advances in biomaterials, and present emphasize on the perspectives of gene regulation and therapy of noncoding RNAs (ncRNAs), such as circular RNA (circRNA) and microRNA (miRNA).

Genetic polymorphisms in MIR1208 and MIR5708 are associated with susceptibility to COPD in the Chinese population

BACKGROUND

Chronic obstructive pulmonary disease (COPD) is a complex disease characterized by limited airflow and is influenced by genetic and environmental factors. The purpose of this study was to investigate the effects of gene polymorphisms in MIR5708 and MIR1208 on COPD risk.

METHODS

Four single nucleotide polymorphisms (SNPs) in MIR5708 (rs6473227 and rs16907751) and MIR1208 (rs2608029 and rs13280095) were selected and genotyped among 315 COPD patients and 314 healthy controls using the Agena MassARRAY platform. SPSS 18.0 was used for statistical analysis and data processing. Odds ratios (ORs) and 95% confidence intervals (CIs) were calculated to assess the association between genetic variants of MIR1208 and MIR5708 and COPD risk.

RESULTS

The results suggested that rs16907751 variants in MIR5708 contributed to an increased susceptibility to COPD in the allelic (P = 0.001), co-dominant (homozygous) (P = 0.001), dominant (P = 0.017), recessive (P = 0.002), and additive (P = 0.002) models. The effects of MIR5708 and MIR1208 gene polymorphisms on the risk of COPD were age-, sex-, smoking status-, and BMI-related. Furthermore, the C-A and G-A haplotypes of rs2608029 and rs13280095 in MIR1208 were identified as risk factors for COPD in the population over 70 years (P = 0.029) and in women (P = 0.049), respectively. Finally, significant associations between rs16907751genotypes with pulse rate and forced expiratory volume in 1 s were found among COPD patients.

CONCLUSION

Genetic polymorphisms in MIR5708 and MIR1208 are associated with increased risk of COPD in China.

Boosting Performance of Inverted Perovskite Solar Cells by Diluting Hole Transport Layer

In our study, by developing the diluted PEDOT:PSS (D-PEDOT:PSS) to replace PEDOT:PSS stock solution as hole transport layer (HTL) materials for fabricating the inverted perovskite solar cells (PSCs), the performance of developed device with ITO/D-PEDOT:PSS/MAPbI_3-xCl_x/C₆₀/BCP/Ag structure is enhanced distinctly. Experimental results reveal that when the dilution ratio is 10:1, the optimal power conversion efficiency (PCE) of the D-PEDOT:PSS device can reach up to 17.85% with an increase of 11.28% compared to the undiluted PEDOT:PSS device. A series of investigations have confirmed that the efficiency improvement is mainly attributed to the two aspects: on one hand, the transmittance and conductivity of D-PEDOT:PSS HTL are improved, and the density of defect states at the interface is reduced after dilution, promoting the separation and transmission of charges, thus the short-circuit current (J_SC) is significantly increased; on the other hand, the work function of D-PEDOT:PSS becomes more consistent with perovskite layer, and the voltage loss is reduced, so that the higher open circuit voltage (V_OC) is obtained. Our research has indicated that diluting HTL develops a simpler, more efficient and cost-effective method to further improve performance for inverted PSCs.

Mechanism of interactions between tripeptide NCW on cellular membrane using molecular dynamic simulation

Tripeptide NCW identified in Mizuhopecten yessoensis has been shown to possess in vivo antihypertensive effect. However, the poor understanding of the absorption of NCW across the membrane limits its application. In this study, we have investigated the interaction of NCW with DPPC membrane via 400 ns all-atom molecular dynamic simulation using GROMACS software. The structural variations of NCW during absorption, the location and distribution of NCW in the membrane, and the effect of NCW on the properties of membranes during simulation were analyzed to understand the dynamic behavior of NCW in DPPC membrane system. The results suggested that the structures of NCW were stable during simulation. Further, NCW could bind on the surface of the DPPC membrane and enter the hydrophobic interior of the DPPC membrane. Residue Try played an important role in the absorption of NCW across the membrane. Hydrogen bonds and hydrophobic interactions stabilized the interaction of NCW with the membrane. All the above studies analyzed the interaction mechanism between NCW and DPPC membranes at the atomic level and laid the foundation for further transmembrane studies of NCW.

Fabrication of biphasic cartilage-bone integrated scaffolds based on tissue-specific photo-crosslinkable acellular matrix hydrogels

The fabrication of biphasic cartilage-bone integrated scaffolds is an attractive alternative for osteochondral repair but has proven to be extremely challenging. Existing three-dimensional (3D) scaffolds are insufficient to accurately biomimic the biphasic cartilage-bone integrated microenvironment. Currently, photo-crosslinkable hydrogels based on tissue-specific decellularized extracellular matrix (dECM) have been considered as an important technique to fabricate biomimetic scaffolds, but so far there has been no breakthrough in the photo-crosslinkable hydrogel scaffolds with biphasic cartilage-bone biomimetic microenvironment. Here, we report a novel strategy for the preparation of biomimetic cartilage-bone integrated scaffolds based on photo-crosslinkable cartilage/bone-derived dECM hydrogels, which are able to reconstruct biphasic cartilage-bone biomimetic microenvironment. The biphasic cartilage-bone integrated scaffolds provided a 3D microenvironment for osteochondral regeneration. The cartilage biomimetic scaffolds, consisting of cartilage-derived dECM hydrogels, efficiently regulated chondrogenesis of bone marrow mesenchymal stem cells (BMSCs). The bone biomimetic scaffolds, composed of cartilage/bone-derived dECM hydrogels, first regulated chondrogenesis of BMSCs, followed by endochondral ossification over time. Taken together, the biphasic cartilage-bone integrated tissue could be successfully reconstructed by subcutaneous culture based on cartilage-bone bilayered structural design. Furthermore, the biphasic cartilage-bone biomimetic scaffolds (cell-free) achieved satisfactory cartilage-bone integrated regeneration in the osteochondral defects of rabbits’ knee joints.

Multiphotoconductance Levels of the Organic Semiconductor of Polyimide-Based Memristor Induced by Interface Charges

A memristor with Au/polyimide (PI)/Au structure is prepared by magnetron sputtering to investigate the multiphotoconductance resistive switching (RS) memory behavior. The PI-based memristor presents stable bipolar RS memory and is sensitive to visible light. Four discrete conductance states in both high-resistance state (HRS) and low-resistance state (LRS) are obtained when illuminating by 365, 550, 590, and 780 nm light. Electron trapping and detrapping from the defects distributed at interfaces and the PI switching layer are responsible for the observed RS memory behavior. The enhanced trapping and detrapping process by light illumination is responsible for the multiconductance states. This work provides the possibility for further development of neuromorphic vision sensors using an organic semiconductor-based memristor.

Second-order associative memory circuit hardware implemented by the evolution from battery-like capacitance to resistive switching memory

Memristor-based Pavlov associative memory circuit presented today only realizes the simple condition reflex process. The secondary condition reflex endows the simple condition reflex process with more bionic, but it is only demonstrated in design and involves the large number of redundant circuits. A FeOx-based memristor exhibits an evolution process from battery-like capacitance (BLC) state to resistive switching (RS) memory as the I-V sweeping increase. The BLC is triggered by the active metal ion and hydroxide ion originated from water molecule splitting at different interfaces, while the RS memory behavior is dominated by the diffusion and migration of ion in the FeOx switching function layer. The evolution processes share the nearly same biophysical mechanism with the second-order conditioning. It enables a hardware-implemented second-order associative memory circuit to be feasible and simple. This work provides a novel path to realize the associative memory circuit with the second-order conditioning at hardware level.

Functional Trachea Reconstruction Using 3D-Bioprinted Native-Like Tissue Architecture Based on Designable Tissue-Specific Bioinks

Functional segmental trachea reconstruction remains a remarkable challenge in the clinic. To date, functional trachea regeneration with alternant cartilage-fibrous tissue-mimetic structure similar to that of the native trachea relying on the three-dimensional (3D) bioprinting technology has seen very limited breakthrough. This fact is mostly due to the lack of tissue-specific bioinks suitable for both cartilage and vascularized fibrous tissue regeneration, as well as the need for firm interfacial integration between stiff and soft tissues. Here, a novel strategy is developed for 3D bioprinting of cartilage-vascularized fibrous tissue-integrated trachea (CVFIT), utilizing photocrosslinkable tissue-specific bioinks. Both cartilage- and fibrous tissue-specific bioinks created by this study provide suitable printability, favorable biocompatibility, and biomimetic microenvironments for chondrogenesis and vascularized fibrogenesis based on the multicomponent synergistic effect through the hybrid photoinitiated polymerization reaction. As such, the tubular analogs are successfully bioprinted and the ring-to-ring alternant structure is tightly integrated by the enhancement of interfacial bonding through the amidation reaction. The results from both the trachea regeneration and the in situ trachea reconstruction demonstrate the satisfactory tissue-specific regeneration along with realization of mechanical and physiological functions. This study thus illustrates the 3D-bioprinted native tissue-like trachea as a promising alternative for clinical trachea reconstruction.

Modulating cancer-stroma crosstalk by a nanoparticle-based photodynamic method to pave the way for subsequent therapies

Cancer cells and their stromal microenvironment are mutually supportive. Either destroying cancer cells or damaging stromal components cannot guarantee a satisfactory outcome in the long-term treatment. Herein, we showed that the tumor-stroma crosstalk was disturbed by nanoparticle-based photodynamic therapy (PDT) in pancreatic tumor models, leading to the persistent inhibition of extracellular matrix (ECM) secretion and the enhanced therapeutic effect. By employing a conditioned medium method, we found that the nanoparticulate PDT at a sub-lethal dosage down-regulated TGFβ signaling pathways, leading to the decrease in drug resistance, proliferation, and migration of the cancer cells. Meanwhile, pancreatic stellate cells (PSCs) were inactivated by PDT, hindering the secretion of ECM. Combining the results that PDT indiscriminately killed PSCs and cancer cells, we showed that the mutual support between the cancer cells and the stroma was interrupted. We further presented the inhibition of the crosstalk persistently enhanced tumor penetration in stroma-rich pancreatic tumor models. The loosened stroma not only facilitated tumor eradication by subsequent therapy but also improved the efficiency of gemcitabine treatment on monthly later recurrent tumors. Therefore, our work may boost the potential of PDT to be a valuable individual or adjuvant treatment for desmoplastic cancers.

Repair of Large-Scale Rib Defects Based on Steel-Reinforced Concrete-Designed Biomimetic 3D-Printed Scaffolds with Bone-Mineralized Microenvironments

Tissue engineering technology provides a promising approach for large-scale bone reconstruction in cases of extensive chest wall defects. However, previous studies did not consider meticulous scaffold design specific to large-scale rib regeneration in terms of three-dimensional (3D) shape, proper porous structures, enough mechanical strength, and osteogenic microenvironments. Thus, there is an urgent need to develop an appropriate bone biomimetic scaffold (BBS) to address this problem. In this study, a BBS with controllable 3D morphology, appropriate mechanical properties, good biocompatibility and biodegradability, porous structure suitable for cell loading, and a biomimetic osteogenic inorganic salt (OIS) microenvironment was successfully prepared by integrating computer-aided design, 3D-printing, cast-molding, and freeze-drying technologies. The addition of the OIS in the scaffold substantially promoted ectopic bone regeneration in vivo, which might be attributed to the activation of osteogenic and angiogenic signaling pathways as well as upregulated expression of osteogenic genes. More importantly, dual long rib defects could be successfully repaired and medullary cavity recanalized by the rib-shaped mature cortical bone, which might be mediated by the activation of osteoclast signaling pathways. Thus, this paper presents a reliable BBS and proposes a new strategy for the repair of large-scale bone defects.

[A multicenter cross-sectional study of quality of life and nonsurgical treatment in patients with knee osteoarthritis]

Objective: To explore the influencing factors of health-related quality of life (HRQoL) in patients with knee osteoarthritis, and to analyze the non-surgical treatment of knee osteoarthritis. Methods: Demographic variables, treatment modalities, imaging data, and 12-item short form health survey (SF-12) scores of patients with knee osteoarthritis in orthopedic outpatient departments of five hospitals in Beijing from December 2017 to November 2018 were collected to analyze influencing factors of HRQoL and non-surgical treatment. Results: A total of 2 034 patients were included. There were 530 males (26.1%) and 1 504 females (73.9%), with a mean age of (59.17±10.22) years. In terms of physical quality of life, female patients with knee osteoarthritis had lower physical components summary (PCS) compared with male patients (β=-0.521, P=0.036); patients aged ≥64 years had lower PCS than those aged<55 years (β=-0.636, P=0.026). Patients with an education of more than 12 years had higher PCS than those with less than 10 years (β=1.063, P<0.001). Compared to patients with mild clinical symptoms, the PCS of patients with moderate clinical symptoms was lower (β=-0.860, P=0.002), while the PCS of those with severe clinical symptoms was much lower (β=-1.126, P<0.001). Patients treated with combination therapy had higher PCS than untreated patients (β=0.731, P=0.005). In terms of mental quality of life, compared to patients engaged in sedentary work, the mental components summary (MCS) of patients engaged in mild manual labor jobs was lower (β=-0.712, P=0.015); Compared to patients with a Charson comorbidity index of 0, patients with a Charlson comorbidity index ≥ 2 had lower MCS (β=-1.183, P=0.007). In the past 12 months, 648 (31.9%), 143 (7.0%), 406 (20.0%), 680 (33.4%), 343 (16.9%), 681 (33.5%), 170 (8.4%) patients had used non-steroid anti-inflammatory drugs (NSAIDs), acetaminophen, glucosamine/chondroitin formulations, physical therapy, articular cavity puncture injection, traditional Chinese medicine treatment and exercise therapy, respectively. Total of 451 patients (22.2%) received monotherapy and 889 patients (43.7%) received combination therapy. Conclusions: The major non-surgical treatment methods for patients with knee osteoarthritis in Beijing are NSAIDs, physiotherapy and traditional Chinese medicine. Combination therapy is used more frequently than monotherapy. Physical quality of life is related to gender, age, education, severity of symptoms and treatment, while mental quality of life is related to occupational labor and comorbidities.