1
|
Hollow Stair-Stepping Spherical High-Entropy Prussian Blue Analogue for High-Rate Sodium Ion Batteries. ACS APPLIED MATERIALS & INTERFACES 2024. [PMID: 38753436 DOI: 10.1021/acsami.4c04785] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/18/2024]
Abstract
Prussian blue analogues (PBAs) are considered to be one of the most suitable sodium storage materials, especially with the introduction of the high-entropy (HE) concept into their structure to further improve their various abilities. However, severe agglomeration of the HEPBA particles still limits the fast charging capabilities. Here, an HEPBA (Nax(FeMnCoNiCu)[Fe(CN)6]y□1-y·nH2O) with a hollow stair-stepping spherical structure has been prepared through the chemical etching process of the traditional cubic structure of HEPBA. Electrochemical characterization (sodium ion battery), kinetic analysis, and COMSOL Multiphysics simulations reveal that the nature of the high-entropy and the hollow stair-stepping spherical structure can greatly improve the diffusion behavior of Na+ ions. Moreover, the hollow structure effectively mitigates the volume change of HEPBA during SIBs operation, ultimately extending the lifespan. Consequently, the as-prepared HEPBA cathode exhibits excellent rate performance (126.5 and 76.4 mAh g-1 at 0.1 and 4.0 A g-1, respectively) and stable long-term capability (maintaining its 75.6% capacity after 1000 cycles) due to its unique structure. Furthermore, the waste of the etching process can easily be recycled to prepare more HEPBA product. This processing method holds great promise for designing nanostructures of advanced high-entropy Prussian blue analogues for sodium ion batteries.
Collapse
|
2
|
Dynamic Covalent Amphiphilic Polymer Conetworks Based on End-Linked Pluronic F108: Preparation, Characterization, and Evaluation as Matrices for Gel Polymer Electrolytes. ACS APPLIED MATERIALS & INTERFACES 2024; 16. [PMID: 38669089 PMCID: PMC11082838 DOI: 10.1021/acsami.3c19189] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/21/2023] [Revised: 04/18/2024] [Accepted: 04/19/2024] [Indexed: 04/28/2024]
Abstract
We present the development of a platform of well-defined, dynamic covalent amphiphilic polymer conetworks (APCN) based on an α,ω-dibenzaldehyde end-functionalized linear amphiphilic poly(ethylene glycol)-b-poly(propylene glycol)-b-poly(ethylene glycol) (PEG-b-PPG-b-PEG, Pluronic) copolymer end-linked with a triacylhydrazide oligo(ethylene glycol) triarmed star cross-linker. The developed APCNs were characterized in terms of their rheological (increase in the storage modulus by a factor of 2 with increase in temperature from 10 to 50 °C), self-healing, self-assembling, and mechanical properties and evaluated as a matrix for gel polymer electrolytes (GPEs) in both the stretched and unstretched states. Our results show that water-loaded APCNs almost completely self-mend, self-organize at room temperature into a body-centered cubic structure with long-range order exhibiting an aggregation number of around 80, and display an exceptional room temperature stretchability of ∼2400%. Furthermore, ionic liquid-loaded APCNs could serve as gel polymer electrolytes (GPEs), displaying a substantial ion conductivity in the unstretched state, which was gradually reduced upon elongation up to a strain of 4, above which it gradually increased. Finally, it was found that recycled (dissolved and re-formed) ionic liquid-loaded APCNs could be reused as GPEs preserving 50-70% of their original ion conductivity.
Collapse
|
3
|
A dicarbonate solvent electrolyte for high performance 5 V-Class Lithium-based batteries. Nat Commun 2024; 15:536. [PMID: 38225282 PMCID: PMC10789778 DOI: 10.1038/s41467-024-44858-3] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/04/2023] [Accepted: 01/08/2024] [Indexed: 01/17/2024] Open
Abstract
Rechargeable lithium batteries using 5 V positive electrode materials can deliver considerably higher energy density as compared to state-of-the-art lithium-ion batteries. However, their development remains plagued by the lack of electrolytes with concurrent anodic stability and Li metal compatibility. Here we report a new electrolyte based on dimethyl 2,5-dioxahexanedioate solvent for 5 V-class batteries. Benefiting from the particular chemical structure, weak interaction with lithium cation and resultant peculiar solvation structure, the resulting electrolyte not only enables stable, dendrite-free lithium plating-stripping, but also displays anodic stability up to 5.2 V (vs. Li/Li+), in additive or co-solvent-free formulation, and at low salt concentration of 1 M. Consequently, the Li | |LiNi0.5Mn1.5O4 cells using the 1 M LiPF6 in 2,5-dioxahexanedioate based electrolyte retain >97% of the initial capacity after 250 cycles, outperforming the conventional carbonate-based electrolyte formulations, making this, and potentially other dicarbonate solvents promising for future Lithium-based battery practical explorations.
Collapse
|
4
|
Practical Cell Design for PTMA-Based Organic Batteries: an Experimental and Modeling Study. ACS APPLIED MATERIALS & INTERFACES 2023. [PMID: 37852614 DOI: 10.1021/acsami.3c11838] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/20/2023]
Abstract
Poly(2,2,6,6-tetramethyl-1-piperidinyloxy methacrylate) (PTMA) is one of the most promising organic cathode materials thanks to its relatively high redox potential, good rate performance, and cycling stability. However, being a p-type material, PTMA-based batteries pose additional challenges compared to conventional lithium-ion systems due to the involvement of anions in the redox process. This study presents a comprehensive approach to optimize such batteries, addressing challenges in electrode design, scalability, and cost. Experimental results at a laboratory scale demonstrate high active mass loadings of PTMA electrodes (up to 9.65 mg cm-2), achieving theoretical areal capacities that exceed 1 mAh cm-2. Detailed physics-based simulations and cost and performance analysis clarify the critical role of the electrolyte and the impact of the anion amount in the PTMA redox process, highlighting the benefits and the drawbacks of using highly concentrated electrolytes. The cost and energy density of lithium metal batteries with such high mass loading PTMA cathodes were simulated, finding that their performance is inferior to batteries based on inorganic cathodes even in the most optimistic conditions. In general, this work emphasizes the importance of considering a broader perspective beyond the lab scale and highlights the challenges in upscaling to realistic battery configurations.
Collapse
|
5
|
Revealing the reversible solid-state electrochemistry of lithium-containing conjugated oximates for organic batteries. SCIENCE ADVANCES 2023; 9:eadg6079. [PMID: 37115926 PMCID: PMC10146882 DOI: 10.1126/sciadv.adg6079] [Citation(s) in RCA: 3] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Indexed: 05/03/2023]
Abstract
In the rising advent of organic Li-ion positive electrode materials with increased energy content, chemistries with high redox potential and intrinsic oxidation stability remain a challenge. Here, we report the solid-phase reversible electrochemistry of the oximate organic redox functionality. The disclosed oximate chemistries, including cyclic, acyclic, aliphatic, and tetra-functional stereotypes, uncover the complex interplay between the molecular structure and the electroactivity. Among the exotic features, the most appealing one is the reversible electrochemical polymerization accompanying the charge storage process in solid phase, through intermolecular azodioxy bond coupling. The best-performing oximate delivers a high reversible capacity of 350 mAh g-1 at an average potential of 3.0 versus Li+/Li0, attaining 1 kWh kg-1 specific energy content at the material level metric. This work ascertains a strong link between electrochemistry, organic chemistry, and battery science by emphasizing on how different phases, mechanisms, and performances can be accessed using a single chemical functionality.
Collapse
|
6
|
Chameleon Multienvironment Nanoreactors. ACS APPLIED MATERIALS & INTERFACES 2023; 15:20166-20174. [PMID: 37058326 DOI: 10.1021/acsami.3c02185] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/19/2023]
Abstract
Nanoreactors consisting of hydrophilic porous SiO2 shells and amphiphilic copolymer cores have been prepared, which can easily self-tune their hydrophilic/hydrophobic balance depending on the environment and exhibit chameleon-like behavior. The accordingly obtained nanoparticles show excellent colloidal stability in a variety of solvents with different polarity. Most importantly, thanks to the assistance of the nitroxide radicals attached to the amphiphilic copolymers, the synthesized nanoreactors show high catalytic activity for model reactions in both polar and nonpolar environments and, more particularly, realize a high selectivity for the products resulting from the oxidation of benzyl alcohol in toluene.
Collapse
|
7
|
Boron Nitride-Doped Polyphenylenic Organogels. CHEMISTRY OF MATERIALS : A PUBLICATION OF THE AMERICAN CHEMICAL SOCIETY 2022; 34:10670-10680. [PMID: 36530943 PMCID: PMC9753561 DOI: 10.1021/acs.chemmater.2c01766] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 06/13/2022] [Revised: 11/03/2022] [Indexed: 06/17/2023]
Abstract
Herein, we describe the synthesis of the first boron nitride-doped polyphenylenic material obtained through a [4 + 2] cycloaddition reaction between a triethynyl borazine unit and a biscyclopentadienone derivative, which undergoes organogel formation in chlorinated solvents (the critical jellification concentration is 4% w/w in CHCl3). The polymer has been characterized extensively by Fourier-transform infrared spectroscopy, solid-state 13C NMR, solid-state 11B NMR, and by comparison with the isolated monomeric unit. Furthermore, the polymer gels formed in chlorinated solvents have been thoroughly characterized and studied, showing rheological properties comparable to those of polyacrylamide gels with a low crosslinker percentage. Given the thermal and chemical stability, the material was studied as a potential support for solid-state electrolytes. showing properties comparable to those of polyethylene glycol-based electrolytes, thus presenting great potential for the application of this new class of material in lithium-ion batteries.
Collapse
|
8
|
Bio-Based Solid Electrolytes Bearing Cyclic Carbonates for Solid-State Lithium Metal Batteries. CHEMSUSCHEM 2022; 15:e202200913. [PMID: 35839135 DOI: 10.1002/cssc.202200913] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 05/11/2022] [Revised: 07/14/2022] [Indexed: 06/15/2023]
Abstract
Green resources for lithium-based batteries excite many researchers due to their eco-friendly nature. In this work, a sustainable bio-based solid-state electrolyte was developed based on carbonated soybean oil (CSBO), obtained by organocatalyzed coupling of CO2 to epoxidized soybean oil. CSBO coupled with lithium bis(trifluoromethanesulfonyl)imide salt on a bio-based cellulose separator resulted in free-standing membranes. Those membranes on electrochemical measurements exhibited ionic conductivity of around 10-3 S cm-1 at 100 °C and around 10-6 S cm-1 at room temperature with wide electrochemical stability window (up to 4.6 V vs. Li/Li+ ) and transference number up to 0.39 at RT. Further investigations on the galvanostatic charge-discharge of LiFePO4 cathodes with CSBO-based electrolyte membranes and lithium metal anodes delivered the gravimetric capacity of 112 and 157 mAh g-1 at RT and 60 °C, respectively, providing a promising direction to further develop bio-based solid electrolytes for sustainable solid-state lithium batteries.
Collapse
|
9
|
High performance Li-, Na-, and K-ion storage in electrically conducting coordination polymers. ENERGY & ENVIRONMENTAL SCIENCE 2022; 15:3923-3932. [PMID: 36275406 PMCID: PMC9472235 DOI: 10.1039/d2ee00566b] [Citation(s) in RCA: 11] [Impact Index Per Article: 5.5] [Reference Citation Analysis] [Abstract] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/18/2022] [Accepted: 06/29/2022] [Indexed: 05/15/2023]
Abstract
Coordination polymers (CPs) made of redox-active organic moieties and metal ions emerge as an important class of electroactive materials for battery applications. However, the design and synthesis of high voltage alkali-cation reservoir anionic CPs remains challenging, hindering their practical applications. Herein, we report a family of electrically conducting alkali-cation reservoir CPs with the general formula of A2-TM-PTtSA (wherein A = Li+, Na+, or K+; TM = Fe2+, Co2+, or Mn2+; and PTtSA = benzene-1,2,4,5-tetra-methylsulfonamide). The incorporation of transition metal centers not only enables intrinsic high electrical conductivity, but also shows an impressive redox potential increase of as high as 1 V as compared to A4-PTtSA analogues, resulting in a class of organometallic cathode materials with a high average redox potential of 2.95-3.25 V for Li-, Na- and K-ion batteries. A detailed structure - composition - physicochemical properties - performance correlation study is provided relying on experimental and computational analysis. The best performing candidate shows excellent rate capability (86% of the nominal capacity retained at 10C rate), remarkable cycling stability (96.5% after 1000 cycles), outstanding tolerance to low carbon content (5 wt%), high mass loading (50 mg cm-2), and extreme utilisation conditions of low earth orbit space environment tests. The significance of the disclosed alkali-ion reservoir cathodes is further emphasized by utilizing conventional Li-host graphite anode for full cell assembly, attaining a record voltage of 3 V in an organic cathode Li-ion proof-of-concept cell.
Collapse
|
10
|
High Salt-Content Plasticized Flame-Retardant Polymer Electrolytes. ACS APPLIED MATERIALS & INTERFACES 2021; 13:44844-44859. [PMID: 34505760 DOI: 10.1021/acsami.1c11058] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/13/2023]
Abstract
New solid polymer electrolytes are of particular interest for next-generation high-energy batteries since they can overcome the limited voltage window of conventional polyether-based electrolytes. Herein, a flame-retardant phosphorus-containing polymer, poly(dimethyl(methacryloyloxy)methyl phosphonate) (PMAPC1) is introduced as a promising polymer matrix. Free-standing membranes are easily obtained by mixing PMAPC1 with lithium bis(trifluoromethanesulfonyl)imide (LiTFSI) and a small amount of acetonitrile (AN). LiTFSI/AN mixed aggregates are formed that act as plasticizers and enable ionic conductivities up to 1.6 × 10-3 S cm-1 at 100 °C. The high content of LiTFSI used in our electrolytes leads to the formation of a stable LiF solid-electrolyte interphase, which can effectively suppress Li dendrites and the chemical degradation of AN in contact with Li. Accordingly the electrolyte membranes exhibit a wide electrochemical stability window above 4.7 V versus Li+/Li and fire-retardant properties due to the presence of the phosphorus-containing polymer. Atomistic molecular modeling simulations have been performed to determine the structure of the electrolytes on the microscopic scale and to rationalize the trends in ionic conductivity and the transport regime as a function of the electrolyte composition. Finally, our electrolyte membranes enable stable cycling performance for LiFePO4|PMAPC1 + LiTFSI + AN|Li batteries.
Collapse
|
11
|
Application of Redox-Responsive Hydrogels Based on 2,2,6,6-Tetramethyl-1-Piperidinyloxy Methacrylate and Oligo(Ethyleneglycol) Methacrylate in Controlled Release and Catalysis. Polymers (Basel) 2021; 13:1307. [PMID: 33923527 PMCID: PMC8073720 DOI: 10.3390/polym13081307] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/18/2021] [Revised: 04/12/2021] [Accepted: 04/14/2021] [Indexed: 11/29/2022] Open
Abstract
Hydrogels have reached momentum due to their potential application in a variety of fields including their ability to deliver active molecules upon application of a specific chemical or physical stimulus and to act as easily recyclable catalysts in a green chemistry approach. In this paper, we demonstrate that the same redox-responsive hydrogels based on polymer networks containing 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) stable nitroxide radicals and oligoethylene glycol methyl ether methacrylate (OEGMA) can be successfully used either for the electrochemically triggered release of aspirin or as catalysts for the oxidation of primary alcohols into aldehydes. For the first application, we take the opportunity of the positive charges present on the oxoammonium groups of oxidized TEMPO to encapsulate negatively charged aspirin molecules. The further electrochemical reduction of oxoammonium groups into nitroxide radicals triggers the release of aspirin molecules. For the second application, our hydrogels are swelled with benzylic alcohol and tert-butyl nitrite as co-catalyst and the temperature is raised to 50 °C to start the oxidation reaction. Interestingly enough, benzaldehyde is not miscible with our hydrogels and phase-separate on top of them allowing the easy recovery of the reaction product and the recyclability of the hydrogel catalyst.
Collapse
|
12
|
Kinked Silicon Nanowires: Superstructures by Metal-Assisted Chemical Etching. NANO LETTERS 2019; 19:7681-7690. [PMID: 31593477 DOI: 10.1021/acs.nanolett.9b02568] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
We report on metal-assisted chemical etching of Si for the synthesis of mechanically stable, hybrid crystallographic orientation Si superstructures with high aspect ratio, above 200. This method sustains high etching rates and facilitates reproducible results. The protocol enables the control of the number, angle, and location of the kinks via successive etch-quench sequences. We analyzed relevant Au mask catalyst features to systematically assess their impact on a wide spectrum of etched morphologies that can be easily attained and customized by fine-tuning of the critical etching parameters. For instance, the designed kinked Si nanowires can be incorporated in biological cells without affecting their viability. An accessible numerical model is provided to explain the etch profiles and the physicochemical events at the Si/Au-electrolyte interface and offers guidelines for the development of finite-element modeling of metal-assisted Si chemical etching.
Collapse
|
13
|
Linear and Nonlinear Dynamic Behavior of Polymer Micellar Assemblies Connected by Metallo-Supramolecular Interactions. Polymers (Basel) 2019; 11:E1532. [PMID: 31546998 PMCID: PMC6835675 DOI: 10.3390/polym11101532] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 08/13/2019] [Revised: 09/09/2019] [Accepted: 09/15/2019] [Indexed: 02/06/2023] Open
Abstract
The linear and nonlinear rheology of associative colloidal polymer assemblies with metallo-supramolecular interactions is herein studied. Polystyrene-b-poly(tert-butylacrylate) with a terpyridine ligand at the end of the acrylate block is self-assembled into micelles in ethanol, a selective solvent for the latter block, and supramolecularly connected by complexation to divalent metal ions. The dependence of the system elasticity on polymer concentration can be semi-quantitatively understood by a geometrical packing model. For strongly associated (Ni2+, Fe2+) and sufficiently concentrated systems (15 w/v%), any given ligand end-group has a virtually 100% probability of being located in an overlapping hairy region between two micelles. By assuming a 50% probability of intermicellar crosslinks being formed, an excellent prediction of the plateau modulus was achieved and compared with the experimental results. For strongly associated but somewhat more dilute systems (12 w/v%) that still have significant overlap between hairy regions, the experimental modulus was lower than the predicted value, as the effective number of crosslinkers was further reduced along with possible density heterogeneities. The reversible destruction of the network by shear forces can be observed from the strain dependence of the storage and loss moduli. The storage moduli of the Ni2+ and Zn2+ systems at a lower concentration (12 w/v%) showed a rarely observed feature (i.e., a peak at the transition from linear to nonlinear regime). This peak disappeared at a higher concentration (15 w/v%). This behavior can be rationalized based on concentration-dependent network stretchability.
Collapse
|
14
|
Synthesis and characterisation of redox hydrogels based on stable nitroxide radicals. SOFT MATTER 2019; 15:6418-6426. [PMID: 31338513 DOI: 10.1039/c9sm00905a] [Citation(s) in RCA: 13] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/10/2023]
Abstract
The principle of encapsulation/release of a guest molecule from stimuli responsive hydrogels (SRHs) is mainly realised with pH, temperature or light stimuli. However, only a limited number of redox responsive hydrogels have been investigated so far. We report here the development of a SRH that can release its guest molecule upon a redox stimulus. To obtain this redox hydrogel, we have introduced into the hydrogel the 2,2,6,6-tetramethyl-1-piperidinyloxy (TEMPO) stable nitroxide radical, which can be reversibly oxidized into an oxoammonium cation (TEMPO+). Water solubility is provided by the presence of the (oligoethyleneglycol)methacrylate (OEGMA) comonomer. Electrochemical and mechanical characterization showed that those gels exhibit interesting physicochemical properties, making them very promising candidates for practical use in a wide range of applications.
Collapse
|
15
|
Ion-Conducting Redox-Active Polymer Gels Based on Stable Nitroxide Radicals. Polymers (Basel) 2019; 11:E1322. [PMID: 31394882 PMCID: PMC6723383 DOI: 10.3390/polym11081322] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/03/2019] [Revised: 08/03/2019] [Accepted: 08/05/2019] [Indexed: 11/24/2022] Open
Abstract
Redox-active polymer networks based on stable nitroxide radicals are a very promising class of materials to be used in the so-called organic radical batteries. In order to obtain fast-charging and high power electrodes, however, excellent ionic conductivity inside the electrode material is required to allow easy diffusion of ions and fast redox reactions. In this contribution, we investigated redox-active poly(2,2,6,6-tetramethylpiperidinyloxy-4-yl methacrylate) chains cross-linked through ionic liquid-like 1,2,3-triazolium groups. Different networks were prepared in which the amount of cross-linker and the counter-anion associated to the 1,2,3-triazolium group were varied. The ionic conductivities of the different polymer networks were first measured in the solid state by electrochemical impedance spectroscopy at different temperatures, and an increased ionic conductivity was measured when 1,2,3-triazolium groups were present in the network. The effects of the chemical nature of the counterions associated to the 1,2,3-triazolium groups and of the crosslinking density were then studied. The best ionic conductivities were obtained when bis (trifluoromethane)sulfonamide (TFSI) counter-anions were used, and when the crosslinking density of the TFSI-containing gel was higher. Finally, those ion-conducting gels were loaded with free LiTFSI and the transference number of lithium ions was accordingly measured. The good ionic conductivities and lithium ions transference numbers measured for the investigated redox-active gels make them ideal candidates for application as electrode materials for either organic radical batteries or pseudo-capacitors energy storage devices.
Collapse
|
16
|
Synthesis of Vinylidene Fluoride-Based Copolymers Bearing Perfluorinated Ether Pendant Groups and Their Application in Gel Polymer Electrolytes. Macromolecules 2019. [DOI: 10.1021/acs.macromol.9b00355] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
17
|
Diblock copolymers consisting of a redox polymer block based on a stable radical linked to an electrically conducting polymer block as cathode materials for organic radical batteries. Polym Chem 2019. [DOI: 10.1039/c9py00268e] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Coupling a conjugated P3HT block to a radical polymer block leads to improved PTMA battery performances.
Collapse
|
18
|
A H-bond stabilized quinone electrode material for Li-organic batteries: the strength of weak bonds. Chem Sci 2018; 10:418-426. [PMID: 30746090 PMCID: PMC6335633 DOI: 10.1039/c8sc02995d] [Citation(s) in RCA: 48] [Impact Index Per Article: 8.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/06/2018] [Accepted: 10/09/2018] [Indexed: 01/06/2023] Open
Abstract
A hydrogen-bond stabilized organic battery framework illustrated for 2,5-diamino-1,4-benzoquinone (DABQ), an electrically neutral and low mass organic chemical, yet with unusual thermal stability and low solubility in battery electrolytes.
Small organic materials are generally plagued by their high solubility in battery electrolytes. Finding approaches to suppress solubilization while not penalizing gravimetric capacity remains a challenge. Here we propose the concept of a hydrogen bond stabilized organic battery framework as a viable solution. This is illustrated for 2,5-diamino-1,4-benzoquinone (DABQ), an electrically neutral and low mass organic chemical, yet with unusual thermal stability and low solubility in battery electrolytes. These properties are shown to arise from hydrogen bond molecular crystal stabilization, confirmed by a suite of techniques including X-ray diffraction and infrared spectroscopy. We also establish a quantitative correlation between the electrolyte solvent polarity, molecular structure of the electrolyte and DABQ solubility – then correlate these to the cycling stability. Notably, DABQ displays a highly reversible (above 99%) sequential 2-electron electrochemical activity in the solid phase, a process rarely observed for similar small molecular battery chemistries. Taken together, these results reveal a potential new strategy towards stable and practical organic battery chemistries through intramolecular hydrogen-bonding crystal stabilization.
Collapse
|
19
|
Kinked silicon nanowires-enabled interweaving electrode configuration for lithium-ion batteries. Sci Rep 2018; 8:9794. [PMID: 29955101 PMCID: PMC6023865 DOI: 10.1038/s41598-018-28108-3] [Citation(s) in RCA: 15] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/01/2018] [Accepted: 06/11/2018] [Indexed: 11/15/2022] Open
Abstract
A tri-dimensional interweaving kinked silicon nanowires (k-SiNWs) assembly, with a Ni current collector co-integrated, is evaluated as electrode configuration for lithium ion batteries. The large-scale fabrication of k-SiNWs is based on a procedure for continuous metal assisted chemical etching of Si, supported by a chemical peeling step that enables the reuse of the Si substrate. The kinks are triggered by a simple, repetitive etch-quench sequence in a HF and H2O2-based etchant. We find that the inter-locking frameworks of k-SiNWs and multi-walled carbon nanotubes exhibit beneficial mechanical properties with a foam-like behavior amplified by the kinks and a suitable porosity for a minimal electrode deformation upon Li insertion. In addition, ionic liquid electrolyte systems associated with the integrated Ni current collector repress the detrimental effects related to the Si-Li alloying reaction, enabling high cycling stability with 80% capacity retention (1695 mAh/gSi) after 100 cycles. Areal capacities of 2.42 mAh/cm2 (1276 mAh/gelectrode) can be achieved at the maximum evaluated thickness (corresponding to 1.3 mgSi/cm2). This work emphasizes the versatility of the metal assisted chemical etching for the synthesis of advanced Si nanostructures for high performance lithium ion battery electrodes.
Collapse
|
20
|
Near-Model Amphiphilic Polymer Conetworks Based on Four-Arm Stars of Poly(vinylidene fluoride) and Poly(ethylene glycol): Synthesis and Characterization. Macromolecules 2018. [DOI: 10.1021/acs.macromol.7b02475] [Citation(s) in RCA: 47] [Impact Index Per Article: 7.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 02/03/2023]
|
21
|
Mechanochemical Synthesis of PEDOT:PSS Hydrogels for Aqueous Formulation of Li-Ion Battery Electrodes. ACS APPLIED MATERIALS & INTERFACES 2017; 9:34865-34874. [PMID: 28910075 DOI: 10.1021/acsami.7b08937] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 05/07/2023]
Abstract
Water-soluble binders can enable greener and cost-effective Li-ion battery manufacturing by eliminating the standard fluorine-based formulations and associated organic solvents. The issue with water-based dispersions, however, remains the difficulty in stabilizing them, requiring additional processing complexity. Herein, we show that mechanochemical conversion of a regular poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) water-based dispersion produces a hydrogel that meets all the requirements as binder for lithium-ion battery electrode manufacture. We particularly highlight the suitable slurry rheology, improved adhesion, intrinsic electrical conductivity, large potential stability window and limited corrosion of metal current collectors and active electrode materials, compared to standard binder or regular PEDOT:PSS solution-based processing. When incorporating the active materials, conductive carbon and additives with PEDOT:PSS, the mechanochemical processing induces simultaneous binder gelation and fine mixing of the components. The formed slurries are stable, show no phase segregation when stored for months, and produce highly uniform thin (25 μm) to very thick (500 μm) films in a single coating step, with no material segregation even upon slow drying. In conjunction with PEDOT:PSS hydrogels, technologically relevant materials including silicon, tin, and graphite negative electrodes as well as LiCoO2, LiMn2O4, LiFePO4, and carbon-sulfur positive electrodes show superior cycling stability and power-rate performances compared to standard binder formulation, while significantly simplifying the aqueous-based electrode assembly.
Collapse
|
22
|
|
23
|
Synthesis and Rheology of Bulk Metallo-Supramolecular Polymers from Telechelic Entangled Precursors. Macromolecules 2017. [DOI: 10.1021/acs.macromol.7b00646] [Citation(s) in RCA: 33] [Impact Index Per Article: 4.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/19/2022]
|
24
|
A photocleavable stabilizer for the preparation of PHEMA nanogels by dispersion polymerization in supercritical carbon dioxide. Polym Chem 2017. [DOI: 10.1039/c6py01633b] [Citation(s) in RCA: 5] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/23/2022]
Abstract
Synthesis of PHEMA nanogels stable in water by a scCO2 process.
Collapse
|
25
|
Electroactive polymer/carbon nanotube hybrid materials for energy storage synthesized via a “grafting to” approach. RSC Adv 2017. [DOI: 10.1039/c7ra02119d] [Citation(s) in RCA: 25] [Impact Index Per Article: 3.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022] Open
Abstract
Poly(2,2,6,6-tetramethylpiperidin-1-oxyl-4-yl methacrylate) has been grafted onto multi-walled carbon nanotubes to obtain conducting organic cathodes for Li-ion batteries.
Collapse
|
26
|
One-pot synthesis of electro-active polymer gels via Cu(0)-mediated radical polymerization and click chemistry. Polym Chem 2017. [DOI: 10.1039/c6py01807f] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/22/2022]
Abstract
Electro-active polymer gels are prepared via one-pot Cu(0)-mediated radical polymerization and click chemistry.
Collapse
|
27
|
Control over the assembly and rheology of supramolecular networks via multi-responsive double hydrophilic copolymers. Polym Chem 2017. [DOI: 10.1039/c6py02143c] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/01/2023]
Abstract
An orthogonal control over network formation and dynamics is achieved in metallo-supramolecular micellar gels via multi-responsive double hydrophilic copolymers.
Collapse
|
28
|
Abstract
Photo-responsive polymers are able to change their structure, conformation and properties upon light irradiation.
Collapse
|
29
|
Orthogonal Control of the Dynamics of Supramolecular Gels from Heterotelechelic Associating Polymers. ACS Macro Lett 2016; 5:1364-1368. [PMID: 35651219 DOI: 10.1021/acsmacrolett.6b00831] [Citation(s) in RCA: 16] [Impact Index Per Article: 2.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Abstract
One of the first examples of supramolecular gels presenting independent dual dynamics is built through a combination of hydrophobic and metal-ligand interactions. The associating building block consists in a water-soluble linear polymer terminated by a short hydrophobic sticker at one end, and a coordinating moiety at the other end. The distinct supramolecular nature of these noninterfering binding motifs allows the dynamics of the hydrogels to be finely tuned in an orthogonal fashion by the application of specific stimuli. Precisely, the solvent-induced plasticization of the hydrophobic associations and the acid-promoted dissociation of the metal-ligand complexes are used to control the network dynamics. By opposition to classically encountered binary gel-sol responses, we demonstrate that the stimuli-induced transition in material properties can be gradual, provided that the material structure is well designed and strong enough.
Collapse
|
30
|
|
31
|
Poly(TEMPO)/Zinc Hybrid-Flow Battery: A Novel, "Green," High Voltage, and Safe Energy Storage System. ADVANCED MATERIALS (DEERFIELD BEACH, FLA.) 2016; 28:2238-43. [PMID: 26810789 DOI: 10.1002/adma.201505000] [Citation(s) in RCA: 82] [Impact Index Per Article: 10.3] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 10/11/2015] [Revised: 12/05/2015] [Indexed: 05/24/2023]
Abstract
The combination of a polymer-based 2,2,6,6-tetramethylpiperidinyl-N-oxyl (TEMPO) catholyte and a zinc anode, together with a cost-efficient size-exclusion membrane, builds a new type of semi-organic, "green," hybrid-flow battery, which features a high potential range of up to 2 V, high efficiencies, and a long life time.
Collapse
|
32
|
Redox-controlled upper critical solution temperature behaviour of a nitroxide containing polymer in alcohol–water mixtures. Polym Chem 2016. [DOI: 10.1039/c5py01864a] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
Research on stimuli responsive polymers builds momentum as nature-inspired applications using man-made materials are increasingly sought.
Collapse
|
33
|
Ring opening metathesis polymerization of cyclopentene using a ruthenium catalyst confined by a branched polymer architecture. Polym Chem 2016. [DOI: 10.1039/c6py00389c] [Citation(s) in RCA: 9] [Impact Index Per Article: 1.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/25/2022]
Abstract
A Grubbs-type Ru alkene metathesis catalyst has been covalently anchored in the core of a globular star polymer. The spatially-confined catalyst is capable of efficient ring-opening metathesis polymerization of cyclopentene, a low-strain monomer.
Collapse
|
34
|
Polymer/zinc hybrid-flow battery using block copolymer micelles featuring a TEMPO corona as catholyte. Polym Chem 2016. [DOI: 10.1039/c5py02036k] [Citation(s) in RCA: 61] [Impact Index Per Article: 7.6] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/21/2022]
Abstract
A poly(TEMPO methacrylate)-poly(styrene) block copolymer was utilised as catholyte in polymer/zinc hybrid flow batteries.
Collapse
|
35
|
Precise Control over the Rheological Behavior of Associating Stimuli-Responsive Block Copolymer Gels. Gels 2015; 1:235-255. [PMID: 30674175 PMCID: PMC6318586 DOI: 10.3390/gels1020235] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 10/13/2015] [Revised: 11/20/2015] [Accepted: 11/30/2015] [Indexed: 11/17/2022] Open
Abstract
"Smart" materials have considerably evolved over the last few years for specific applications. They rely on intelligent macromolecules or (supra-)molecular motifs to adapt their structure and properties in response to external triggers. Here, a supramolecular stimuli-responsive polymer gel is constructed from heterotelechelic double hydrophilic block copolymers that incorporate thermo-responsive sequences. These macromolecular building units are synthesized via a three-step controlled radical copolymerization and then hierarchically assembled to yield coordination micellar hydrogels. The dynamic mechanical properties of this particular class of materials are studied in shear flow and finely tuned via temperature changes. Notably, rheological experiments show that structurally reinforcing the micellar network nodes leads to precise tuning of the viscoelastic response and yield behavior of the material. Hence, they constitute promising candidates for specific applications, such as mechano-sensors.
Collapse
|
36
|
Schizophrenic thermoresponsive block copolymer micelles based on LCST and UCST behavior in ethanol–water mixtures. Eur Polym J 2015. [DOI: 10.1016/j.eurpolymj.2015.04.008] [Citation(s) in RCA: 22] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/16/2023]
|
37
|
Melt-polymerization of TEMPO methacrylates with nano carbons enables superior battery materials. CHEMSUSCHEM 2015; 8:1692-6. [PMID: 25900530 DOI: 10.1002/cssc.201500246] [Citation(s) in RCA: 22] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Subscribe] [Scholar Register] [Received: 02/16/2015] [Indexed: 05/24/2023]
Abstract
A solvent-free, melt polymerization process of a 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) precursor for rechargeable organic radical batteries is proposed. In situ carbon incorporation in the melted monomer phase yields a nanoscale homogenous polymer composite. Superior battery performances including higher power and cycling stability are attained by using the melt-polymerization method.
Collapse
|
38
|
|
39
|
|
40
|
|
41
|
Controlling the melt rheology of linear entangled metallo-supramolecular polymers. SOFT MATTER 2015; 11:762-774. [PMID: 25492131 DOI: 10.1039/c4sm02319f] [Citation(s) in RCA: 22] [Impact Index Per Article: 2.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/04/2023]
Abstract
We study in the melt the linear viscoelastic properties of supramolecular assemblies obtained by adding different amounts of nickel ions to linear entangled poly(ethylene oxide) (PEO) building blocks end-functionalized by a terpyridine group. We first show that the elasticity of these supramolecular assemblies is mainly governed by the entanglement dynamics of the building blocks, while the supramolecular interactions delay or suppress their relaxation. By adjusting the amount of metal ions, the relaxation time as well as the level of the low-frequency plateau of these supramolecular assemblies can be controlled. In particular, the addition of metal ions above the 1:2 metal ion/terpyridine stoichiometric ratio allows secondary supramolecular interactions to appear, which are able to link the linear supramolecular assemblies and thus, lead to the reversible gelation of the system. By comparing the rheological behavior of different linear PEO samples, bearing or not functionalized chain-ends, we show that these extra supramolecular bonds are partially due to the association between the excess of metal ions and the oxygen atoms of the PEO chains. We also investigate the possible role played by the terpyridine groups in the formation of these secondary supramolecular interactions.
Collapse
|
42
|
Revealing the supramolecular nature of side-chain terpyridine-functionalized polymer networks. Int J Mol Sci 2015; 16:990-1007. [PMID: 25569082 PMCID: PMC4307286 DOI: 10.3390/ijms16010990] [Citation(s) in RCA: 17] [Impact Index Per Article: 1.9] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 11/25/2014] [Accepted: 12/19/2014] [Indexed: 11/29/2022] Open
Abstract
Nowadays, finely controlling the mechanical properties of polymeric materials is possible by incorporating supramolecular motifs into their architecture. In this context, the synthesis of a side-chain terpyridine-functionalized poly(2-(dimethylamino)ethyl methacrylate) is reported via reversible addition-fragmentation chain transfer polymerization. By addition of transition metal ions, concentrated aqueous solutions of this polymer turn into metallo-supramolecular hydrogels whose dynamic mechanical properties are investigated by rotational rheometry. Hence, the possibility for the material to relax mechanical constrains via dissociation of transient cross-links is brought into light. In addition, the complex phenomena occurring under large oscillatory shear are interpreted in the context of transient networks.
Collapse
|
43
|
Abstract
We report a novel approach to synthesize well-defined polymeric Janus nanoparticles by combining the self-assembly of block copolymers in thin films and surface modification by polymer grafting.
Collapse
|
44
|
Synthesis of an original fluorinated triethylene glycol methacrylate monomer and its radical copolymerisation with vinylidene fluoride. Its application as a gel polymer electrolyte for Li-ion batteries. Polym Chem 2015. [DOI: 10.1039/c5py00732a] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.2] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/31/2022]
Abstract
The synthesis and characterisation of novel poly[VDF-g-oligo(EO)] graft copolymers are presented.
Collapse
|
45
|
Abstract
SET-LRP is used for the controlled copolymerisation of 2,2,6,6-tetramethylpiperidin-4-yl methacrylate (TMPM) with 3-azidopropyl methacrylate (AzPMA), followed by the oxidation of TMPM to produce electroactive poly(TEMPO methacrylate) (PTMA).
Collapse
|
46
|
Synthesis and Self-Assembly of Terpyridine End-Capped Poly(N-Isopropylacrylamide)-block-Poly(2-(Dimethylamino)ethyl Methacrylate) Diblock Copolymers. Macromol Rapid Commun 2014; 36:610-5. [DOI: 10.1002/marc.201400553] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 09/28/2014] [Revised: 11/02/2014] [Indexed: 12/22/2022]
|
47
|
Self-assembly of a triblock terpolymer mediated by hydrogen-bonded complexes. ACTA ACUST UNITED AC 2014. [DOI: 10.1002/pola.27471] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/12/2022]
|
48
|
Surface coating mediated swelling and fracture of silicon nanowires during lithiation. ACS NANO 2014; 8:9427-9436. [PMID: 25133525 DOI: 10.1021/nn503564r] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
Surface passivation of silicon anodes is an appealing design strategy for the development of reliable, high-capacity lithium-ion batteries. However, the structural stability of the coating layer and its influence on the lithiation process remain largely unclear. Herein, we show that surface coating mediates the swelling dynamics and the fracture pattern during initial lithiation of crystalline silicon nanopillars. We choose conformally nickel coated silicon architectures as a model system. Experimental findings are interpreted based on a chemomechanical model. Markedly different swelling and fracture regimes have been identified, depending on the coating thickness and silicon nanopillar diameter. Nanopillars with relatively thin coating display anisotropic swelling similar to pristine nanopillars, but with different preferred fracture sites. As the coating thickness increases, the mechanisms become isotropic, with one randomly oriented longitudinal crack that unzips the core-shell structure. The morphology of cracked pillars resembles that of a thin-film electrode on a substrate, which is more amenable to cyclic lithiation without fracture. The knowledge provided here helps clarify the cycling results of coated nanosilicon electrodes and further suggests design rules for better performance electrodes through proper control of the lithiation and fracture.
Collapse
|
49
|
Controlling the Cross-Linking Density of Supramolecular Hydrogels Formed by Heterotelechelic Associating Copolymers. Macromolecules 2014. [DOI: 10.1021/ma500537t] [Citation(s) in RCA: 26] [Impact Index Per Article: 2.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/20/2023]
|
50
|
Thermo-responsive properties of metallo-supramolecular block copolymer micellar hydrogels. SOFT MATTER 2014; 10:3086-3092. [PMID: 24695908 DOI: 10.1039/c3sm53013b] [Citation(s) in RCA: 21] [Impact Index Per Article: 2.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 06/03/2023]
Abstract
Metallo-supramolecular micellar hydrogels exhibiting thermo-mechanical responsiveness are prepared through the hierarchical assembly of a heterotelechelic associating copolymer. The copolymer consists of a linear thermo-sensitive water-soluble sequence terminated by a short hydrophobic sticker at one end, the other being functionalized by a chelating ligand. As the first level of assembly, the associating copolymer is dissolved in aqueous solution to yield micellar nanostructures, bearing coordinative motifs at the end of the coronal chains. The second level of assembly is achieved when transition metal ions are added to the micellar solutions, resulting in almost instantaneous gelation. The thermo-mechanical response of those materials is investigated in detail by rotational rheometry, showing abrupt changes within the temperature boundaries corresponding to the phase transition of the polymer block located in the micellar corona.
Collapse
|