Quantitative Investigation of Intestinal Drug Absorption Enhancement by Drug-Rich Nanodroplets Generated via Liquid-Liquid Phase Separation

Drug-rich droplets formed through liquid-liquid phase separation (LLPS) have the potential to enhance the oral absorption of drugs. This can be attributed to the diffusion of these droplets into the unstirred water layer (UWL) of the gastrointestinal tract and their reservoir effects on maintaining drug supersaturation. However, a quantitative understanding of the effect of drug-rich droplets on intestinal drug absorption is still lacking. In this study, the enhancement of intestinal drug absorption through the formation of drug-rich droplets was quantitatively evaluated on a mechanistic basis. To obtain fenofibrate (FFB)-rich droplets, an amorphous solid dispersion (ASD) of FFB/hypromellose (HPMC) was dispersed in an aqueous medium. Physicochemical characterization confirmed the presence of nanosized FFB-rich droplets in the supercooled liquid state within the FFB/HPMC ASD dispersion. An in situ single-pass intestinal perfusion (SPIP) assay in rats demonstrated that increased quantities of FFB-rich nanodroplets enhanced the intestinal absorption of FFB. The effective diffusion of FFB-rich nanodroplets through UWL would partially contribute to the improved FFB absorption. Additionally, confocal laser scanning microscopy (CLSM) of cross sections of the rat intestine after the administration of fluorescently labeled FFB-rich nanodroplets showed that these nanodroplets were directly taken up by small intestinal epithelial cells. Therefore, the direct uptake of drug-rich nanodroplets by the small intestine is a potential mechanism for improving FFB absorption in the intestine. To quantitatively evaluate the impact of FFB-rich droplets on the FFB absorption enhancement, we determined the apparent permeabilities of the FFB-rich nanodroplets and dissolved FFB based on the SPIP results. The apparent permeability of the FFB-rich nanodroplets was 110-130 times lower than that of dissolved FFB. However, when the FFB-rich nanodroplet concentration was several hundred times higher than that of dissolved FFB, the FFB-rich nanodroplets contributed significantly to FFB absorption improvement. The present study highlights that drug-rich nanodroplets play a direct role in enhancing drug absorption in the gastrointestinal tract, indicating their potential for further improvement of oral absorption from ASD formulations.

Mechanistic Analysis of Temperature-Dependent Curcumin Release from Poly(lactic-co-glycolic acid)/Poly(lactic acid) Polymer Nanoparticles

In this study, we investigated the mechanism of curcumin (CUR) release from poly(lactic-co-glycolic acid) (PLGA) and poly(lactic acid) (PLA) nanoparticles (NPs) by evaluating the temperature-dependent CUR release. NPs were prepared by the nanoprecipitation method using various PLGA/PLA polymers with different lactic:glycolic ratios (L:G ratios) and molecular weights. Increasing the polymer molecular weight resulted in a decrease in the particle size of NPs. The wet glass transition temperature (Tg) of PLGA/PLA NPs was lower than the intrinsic polymer Tg, which can be derived from the water absorption and nanosizing of the polymer. The reduction in Tg was more significant for the PLGA/PLA NPs with lower polymer L:G ratios and lower polymer molecular weight. The greater decrease of Tg in the lower polymer L:G ratios was possibly caused by the higher water absorption due to the more hydrophilic nature of the glycolic acid segment than that of the lactic acid segment. The efficient water absorption in PLGA/PLA NPs with lower molecular weight could cause a significant reduction of Tg as it has lower hydrophobicity. CUR release tests from the PLGA/PLA NPs exhibited enhanced CUR release with increasing temperatures, irrespective of polymer species. By fitting the CUR release profiles into mathematical models, the CUR release process was well described by an initial burst release followed by a diffusion-controlled release. The wet Tg and particle size of the PLGA/PLA NPs affected the amount and temperature dependence of the initial burst release of CUR. Above the wet Tg of NPs, the initial burst release of CUR increased sharply. Smaller particle sizes of PLGA/PLA NPs led to a higher fraction of initial CUR burst release, which was more pronounced above the wet Tg of NPs. The wet Tg and particle sizes of the PLGA/PLA NPs also influenced the diffusion-controlled CUR release. The diffusion rate of CUR in the NPs increased as the wet Tg values of the NPs decreased. The diffusion path length of CUR was affected by the particle size, with larger particle size resulting in a prolonged diffusion-controlled release of CUR. This study highlighted that for the formulation development of PLGA/PLA NPs, suitable PLGA/PLA polymers should be selected considering the physicochemical properties of PLGA/PLA NPs and their correlation with the release behavior of encapsulated drugs at the application temperature.

Controlled Sublimation Rate of Guest Drug from Polymorphic Forms of a Cyclodextrin-Based Polypseudorotaxane Complex and Its Correlation with Molecular Dynamics as Probed by Solid-State NMR

Encapsulation of active pharmaceutical ingredients (APIs) in confined spaces has been extensively explored as it dramatically alters the molecular dynamics and physical properties of the API. Herein, we explored the effect of encapsulation on the molecular dynamics and physical stability of a guest drug, salicylic acid (SA), confined in the intermolecular spaces of γ-cyclodextrin (γ-CD) and poly(ethylene glycol) (PEG)-based polypseudorotaxane (PPRX) structure. The sublimation tendency of SA encapsulated in three polymorphic forms of the γ-CD/PEG-based PPRX complex, monoclinic columnar (MC), hexagonal columnar (HC), and tetragonal columnar (TC), was investigated. The SA sublimation rate was decreased by 3.0-6.6-fold and varied in the order of MC form > HC form > TC form complex. The 13C and 1H magic-angle spinning (MAS) solid-state nuclear magnetic resonance (NMR) spectra and 13C spin-lattice relaxation time (T1) indicated that the encapsulated SA molecules existed as the monomeric form, and its molecular mobility increased in the order of MC form > HC form > TC form complex. In the complexes, a rapid chemical exchange between two dynamic states of SA (free and bound) was suggested, with varying adsorption/desorption rates accounting for its distinct molecular mobility. This adsorption/desorption process was influenced by proton exchange at the interaction site and interaction strength of SA in the complexes, as evidenced by 1H MAS spectra and temperature dependency of the 13C carbonyl chemical shift. A positive correlation between the molecular mobility of SA and its sublimation rate was established. Moreover, the molecular mobility of γ-CD and PEG in the complexes coincided with that of SA, which can be explained by fast guest-driven dynamics. This is the first report on the stability improvement of an API through complexation in polymorphic supramolecular host structures. The relationship between the molecular dynamics and physical properties of encapsulated API will aid in the rational design of drug delivery systems.

The Effect of Cholesterol Content on the Adjuvant Activity of Nucleic-Acid-Free Lipid Nanoparticles

RNA vaccines are applicable to the treatment of various infectious diseases via the inducement of robust immune responses against target antigens by expressing antigen proteins in the human body. The delivery of messenger RNA by lipid nanoparticles (LNPs) has become a versatile drug delivery system used in the administration of RNA vaccines. LNPs are widely considered to possess adjuvant activity that induces a strong immune response. However, the properties of LNPs that contribute to their adjuvant activity continue to require clarification. To characterize the relationships between the lipid composition, particle morphology, and adjuvant activity of LNPs, the nanostructures of LNPs and their antibody production were evaluated. To simply compare the adjuvant activity of LNPs, empty LNPs were subcutaneously injected with recombinant proteins. Consistent with previous research, the presence of ionizable lipids was one of the determinant factors. Adjuvant activity was induced when a tiny cholesterol assembly (cholesterol-induced phase, ChiP) was formed according to the amount of cholesterol present. Moreover, adjuvant activity was diminished when the content of cholesterol was excessive. Thus, it is plausible that an intermediate structure of cholesterol (not in a crystalline-like state) in an intra-particle space could be closely related to the immunogenicity of LNPs.

Unveiling the flavone-solubilizing effects of α-glucosyl rutin and hesperidin: probing structural differences through NMR and SAXS analyses

Flavonoids often exhibit broad bioactivity but low solubility and bioavailability, limiting their practical applications. The transglycosylated materials α-glucosyl rutin (Rutin-G) and α-glucosyl hesperidin (Hsp-G) are known to enhance the dissolution of hydrophobic compounds, such as flavonoids and other polyphenols. In this study, the effects of these materials on flavone solubilization were investigated by probing their interactions with flavone in aqueous solutions. Rutin-G and Hsp-G prepared via solvent evaporation and spray-drying methods were evaluated for their ability to dissolve flavones. Rutin-G had a stronger flavone-solubilizing effect than Hsp-G in both types of composite particles. The origin of this difference in behavior was elucidated by small-angle X-ray scattering (SAXS) and nuclear magnetic resonance analyses. The different self-association structures of Rutin-G and Hsp-G were supported by SAXS analysis, which proved that Rutin-G formed polydisperse aggregates, whereas Hsp-G formed core-shell micelles. The observation of nuclear Overhauser effects (NOEs) between flavone and α-glucosyl materials suggested the existence of intermolecular hydrophobic interactions. However, flavone interacted with different regions of Rutin-G and Hsp-G. In particular, NOE correlations were observed between the protons of flavone and the α-glucosyl protons of Rutin-G. The different molecular association states of Rutin-G or Hsp-G could be responsible for their different effects on the solubility of flavone. A better understanding of the mechanism of flavone solubility enhancement via association with α-glucosyl materials would permit the application of α-glucosyl materials to the solubilization of other hydrophobic compounds including polyphenols such as flavonoids.

Molecular-Level Structural Analysis of siRNA-Loaded Lipid Nanoparticles by 1H NMR Relaxometry: Impact of Lipid Composition on Their Structural Properties

1H NMR relaxometry was applied for molecular-level structural analysis of siRNA-loaded lipid nanoparticles (LNPs) to clarify the impact of the neutral lipids, 1,2-distearoyl-sn-glycero-3-phosphocholine (DSPC) and cholesterol, on the physicochemical properties of LNP. Incorporating DSPC and cholesterol in ionizable lipid-based LNP decreased the molecular mobility of ionizable lipids. DSPC reduced the overall molecular mobility of ionizable lipids, while cholesterol specifically decreased the mobility of the hydrophobic tails of ionizable lipids, suggesting that cholesterol filled the gap between the hydrophobic tails of ionizable lipids. The decrease in molecular mobility and change in orientation of lipid mixtures contributed to the maintenance of the stacked bilayer structure of siRNA and ionizable lipids, thereby increasing the siRNA encapsulation efficiency. Furthermore, NMR relaxometry revealed that incorporating those neutral lipids enhanced PEG chain flexibility at the LNP interface. Notably, a small amount of DSPC effectively increased PEG chain flexibility, possibly contributing to the improved dispersion stability and narrower size distribution of LNPs. However, cryogenic transmission electron microscopy represented that adding excess amounts of DSPC and cholesterol into LNP resulted in the formation of deformed particles and demixing cholesterol within the LNP, respectively. The optimal lipid composition of ionizable lipid-based LNPs in terms of siRNA encapsulation efficiency and PEG chain flexibility was rationalized based on the molecular-level characterization of LNPs. Moreover, the NMR relaxation rate of tertiary amine protons of ionizable lipids, which are the interaction site with siRNA, can be a valuable indicator of the encapsulated amount of siRNA within LNPs. Thus, NMR-based analysis can be a powerful tool for efficiently designing LNP formulations and their quality control based on the molecular-level elucidation of the physicochemical properties of LNPs.

Designing a Novel Coamorphous Salt Formulation of Telmisartan with Amlodipine to Enhance Permeability and Oral Absorption

Coamorphous formulation is a useful approach for enhancing the solubility of poorly water-soluble drugs via intermolecular interactions. In this study, a hydrogen-bonding-based coamorphous system was developed to improve drug solubility, but it barely changed the apparent permeability (Papp) of the drug. This study aimed to design a novel coamorphous salt using ionic interactions to improve drug permeability and absorption. Telmisartan (TMS), with an acidic group, was used to form a coamorphous salt with basic amlodipine (AML). Evaluation of the physicochemical properties confirmed the formation of a coamorphous salt via ionic interactions between the amine group of AML and the carboxyl group of TMS at a molar ratio of 1:1. The coamorphous salt of TMS/AML enhanced the partitioning of both drugs into octanol, indicating increased lipophilicity owing to the interaction between TMS and AML. The coamorphous salt dramatically enhanced TMS solubility (99.8 times that of untreated TMS) and decreased AML solubility owing to the interaction between TMS and AML. Although the coamorphous salt showed a decreased Papp in the permeation study in the presence of a thicker unstirred water layer (UWL) without stirring, Papp increased in the presence of a thinner UWL with stirring. The oral absorption of TMS from the coamorphous salt increased by up to 4.1 times compared to that of untreated TMS, whereas that of AML remained unchanged. Although the coamorphous salt with increased lipophilicity has a disadvantage in terms of diffusion through the UWL, the UWL is thin in human/animal bodies owing to the peristaltic action of the digestive tract. Dissociation of the coamorphous salt on the membrane surface could contribute to the partitioning of the neutral form of drugs to the membrane cells compared with untreated drugs. As a result, coamorphous salt formation has the advantage of improving the membrane permeation and oral absorption of TMS, owing to the enhanced solubility and supply of membrane-permeable free TMS on the surface of the membrane.

Preparation of a ternary amorphous solid dispersion using hot-melt extrusion for obtaining a stable colloidal dispersion of amorphous probucol nanoparticles

In our previous reports, ternary amorphous solid dispersions (ASDs) of probucol (PBC)/polymer/surfactant were prepared by spray-drying and cryo-grinding, and colloidal dispersions of amorphous PBC nanoparticles were obtained by dispersing the ternary ASD into water. In this study, hot-melt extrusion, which is a practical method for preparing ASD formulations, to obtain ternary ASDs and colloidal dispersions of amorphous PBC nanoparticles. Polyvinylpyrrolidone (PVP) K12, with a relatively low T_g, below 100°C, was used as a polymer, while poloxamer P407 (P407), which remains chemically stable during the hot-melt extrusion process, was utilized as a surfactant. Ternary ASDs were successfully produced with high-weight ratios of PVP and P407. A hydrogen bond between the PBC hydroxyl proton and PVP carbonyl oxygen in the ternary ASD was detected using solid-state NMR spectroscopy, which suggested that amorphous PBC was mainly stabilized by PVP. Stable colloidal dispersions of amorphous PBC nanoparticles were obtained from the PBC/PVP/P407 ASD, at a weight ratio of 1:4:2. The mean particle size was below 200 nm and the amorphous state of PBC remained stable upon storage at 25°C for 14 d. Solution-state ¹H NMR and zeta-potential measurements suggested that P407 mainly stabilized the colloidal dispersion of amorphous PBC nanoparticles, by steric hindrance at the solid/liquid interface. The findings of this study demonstrate that, similar to spray-drying, hot-melt extrusion can form practical ternary ASDs that provide colloidal dispersion of amorphous drug nanoparticles. Thus, this study advocates for the use of hot-melt extrusion in the design of an amorphous formulation for a variety of poorly water-soluble drugs.

Supersaturation maintenance of carvedilol and chlorthalidone by cyclodextrin derivatives: Pronounced crystallization inhibition ability of methylated cyclodextrin

Cyclodextrin (CD) is used to solubilize poorly water-soluble drugs by inclusion complex formation. In this study, we investigated the effect of CD derivatives on stabilizing the supersaturation by inhibiting the crystallization of two poorly water-soluble drugs, carvedilol (CVD) and chlorthalidone (CLT). The phase solubility test showed that β-CD and γ-CD derivatives enhanced the solubility of CVD to a greater extent, whereas the solubility of CLT was enhanced more by β-CD derivatives. The solubilization efficacy of CD derivatives was dependent on the size fitness between the drug molecule and the CD cavity. In the drug crystallization induction time measurement, the same initial drug supersaturation ratio (S) was employed in all the CD solutions, and the methylated CD derivatives greatly outperformed unmethylated CD derivatives in stabilizing the supersaturation of both CVD and CLT. The crystallization inhibition strength of CD derivatives was strongly affected by the CD derivative substituent. Moreover, the calculated logarithm of octanol/water partition coefficients (log P) of CD derivatives showed a good correlation with drug crystallization inhibition ability. Thus, the high hydrophobicity of methylated CD plays an essential role in inhibiting crystallization. These findings can provide a valuable guide for selecting appropriate stabilizing agents for drug-supersaturation formulations.

Quantitative Analysis of Drug Supersaturation Region by Temperature-Variable Nuclear Magnetic Resonance Measurements, Part 2: Effects of Solubilizer

This study utilized temperature-variable nuclear magnetic resonance (NMR) spectroscopy to investigate the effects of a solubilizing agent on the ketoprofen (KTP) supersaturation region. Quantitative NMR analysis showed that the solubilizing agent cetyltrimethylammonium bromide (CTAB) increased both the crystalline and amorphous solubilities of KTP, shifting the KTP supersaturation region to a higher KTP concentration range. The amorphous solubility of KTP was found to be independent of the enantiomeric composition of KTP, even in the presence of CTAB. However, the supersaturation region of the S-enantiomer of KTP (s-KTP) in CTAB solutions was smaller than that of the racemic form of KTP (rac-KTP), likely because of the higher crystalline solubility of s-KTP. When KTP formed a KTP-rich phase via liquid-liquid phase separation from KTP-supersaturated solutions, CTAB was observed to be distributed into the KTP-rich phase, decreasing the chemical potential of KTP and the maximum thermodynamic activity of KTP in the aqueous phase. Additionally, the incorporation of CTAB into the KTP-rich phase diminished the solubilization effect of CTAB micelles in the aqueous phase, narrowing the KTP supersaturation region to a greater extent at higher KTP dose concentrations. Furthermore, the upper-temperature limit of the supersaturated dissolvable region of KTP was lowered in the presence of CTAB, which was rationalized by the melting point depression of the KTP crystal upon mixing with CTAB. The findings of this study highlight the importance of considering the molecular-level impact of solubilizing agents on the drug supersaturation region to fully exploit the potential benefits of supersaturated formulations.

Quantitative Analysis of Drug Supersaturation Region by Temperature-Variable Nuclear Magnetic Resonance Measurements, Part 1: Effects of Polymer and Drug Chiralities

We examined the effects of the polymer-additive and drug chiralities on the ketoprofen (KTP) supersaturation region using temperature-variable nuclear magnetic resonance (NMR). Quantitative NMR analysis revealed that the racemic KTP and corresponding S-enantiomer (rac- and s-KTP) exhibited similar amorphous solubilities in a buffer, while the crystalline solubility of s-KTP was higher than that of rac-KTP. Therefore, rac-KTP exhibited a larger supersaturation region than s-KTP. In contrast, polyvinylpyrrolidone (PVP) reduced the amorphous solubility of both rac- and s-KTP, whereas the crystalline solubility of KTP remained unchanged. Partitioning PVP into the KTP-rich phase reduced the chemical potential of KTP in the KTP-rich phase and the amorphous solubility of KTP. At higher temperatures, the distribution of PVP into the KTP-rich phase became more significant, which considerably reduced the amorphous solubility. Because the upper limit of the KTP supersaturation decreased, PVP narrowed the KTP supersaturation region. The maximum KTP supersaturation ratio decreased with increasing temperature, and the supersaturated dissolvable area of KTP finally disappeared. The maximum temperature at which KTP can form the supersaturation was lowered by replacing rac- with s-KTP and the addition of PVP. The maximum supersaturation temperature was dominated by the melting behavior of crystalline KTP in an aqueous solution. The present study highlighted that a quantitative understanding of the supersaturation region is essential to determine whether supersaturated formulations are beneficial for improving the oral absorption of poorly water-soluble drugs.

Ready-to-Use-Type Lyophilized Lipid Nanoparticle Formulation for the Postencapsulation of Messenger RNA

Based on the clinical success of an in vitro transcribed mRNA (IVT-mRNA) that is encapsulated in lipid nanoparticles (mRNA-LNPs), there is a growing demand by researchers to test whether their own biological findings might be applicable for use in mRNA-based therapeutics. However, the equipment and/or know-how required for manufacturing such nanoparticles is often inaccessible. To encourage more innovation in mRNA therapeutics, a simple method for preparing mRNA-LNPs is prerequisite. In this study, we report on a method for encapsulating IVT-mRNA into LNPs by rehydrating a Ready-to-Use empty freeze-dried LNP (LNPs(RtoU)) formulation with IVT-mRNA solution followed by heating. The resulting mRNA-LNPs(RtoU) had a similar intraparticle structure compared to the mRNA-LNPs prepared by conventional microfluidic mixing. In vivo genome editing, a promising application of these types of mRNA-LNPs, was accomplished using the LNPs(RtoU) containing co-encapsulated Cas9-mRNA and a small guide RNA.

Understanding the rod-to-tube transformation of self-assembled ascorbyl dipalmitate lipid nanoparticles stabilized with PEGylated lipids

We previously established a nanoparticle-based drug delivery system (DDS) for high-dose ascorbic acid therapy by self-assembly of a lipid-modified ascorbic acid derivative, L-ascorbyl 2,6-dipalmitate (ASC-DP). The particles' morphology should be modified for effective DDSs. Here, we modulated the morphology of self-assembled ASC-DP nanoparticles using two different PEGylated lipids, distearoylphosphatidylethanolamine-polyethylene glycol (DSPE-PEG) and cholesterol-polyethylene glycol (Chol-PEG), with various PEG molecular weights. At the preparation molar ratio of 10 : 1 (ASC-DP/PEGylated lipid), rod-like nanoparticles emerged in the ASC-DP/DSPE-PEG system, whereas the ASC-DP/Chol-PEG system yielded tube-like nanoparticles. The internal structures of both rod-like ASC-DP/DSPE-PEG and tube-like ASC-DP/Chol-PEG nanoparticles were similar to that of repeated ASC-DP bilayers. The particles' surfaces featured PEGylated lipids, which stabilized the structure and dispersion of the nanoparticles. For both systems, the particle size increased slightly with increasing the PEGylated lipid's PEG molecular weight. Increasing the PEG molecular weight decreased the inner tunnel size of tube-like ASC-DP/Chol-PEG nanoparticles. A mechanism has been proposed for the rod-to-tube transformation. Surface-layer free-energy changes owing to the mixing of multiple lipids and PEG chain repulsion are thought to underlie the inner tunnels' formation. The rod-to-tube morphology of self-assembled ASC-DP nanoparticles can be modulated by controlling the PEGylated lipids' structure, including the lipid species and the PEG chain length.

Increased Tropism of Extracellular Vesicles Derived from Palmitic Acid-Treated Hepatocytes to Activated Hepatic Stellate Cells

Myofibroblast-like activated hepatic stellate cells (aHSCs), which produce collagen, a major cause of liver fibrosis, are specific target cells for antifibrotic treatment. Recently, several reports have indicated that extracellular vesicles (EVs) play important roles in cell-to-cell communication through their tropism for specific cells or organs. Therefore, the present study aimed to identify aHSC-directed EVs by focusing on cell-to-cell interactions in the liver under pathological conditions. EVs were derived from the hepatocyte cell line AML12 treated with or without palmitic acid (PA) and evaluated for their physical properties and uptake by the aHSC cell line LX-2. AML12-derived EVs had a mean particle diameter of 110-130 nm, negative charge, and expressed the exosomal makers CD9 and CD63. PA-treated AML12 cells released larger EVs with higher protein levels than those without PA treatment. The intracellular uptake efficacy of EVs derived from PA-treated AML12 cells into activated LX-2 cells was significantly higher than those without PA treatment. Our study revealed that PA treatment induces hepatocytes to release EVs with aHSC-tropism. These findings may contribute to the development of an EV-based drug delivery system (DDS) for aHSC-targeted therapy and provide new insights into the role of steatotic hepatocyte-derived EVs in physiological or pathophysiological functions.

Drug-Loaded Nanocarriers Composed of Cholesteryl Oleate Crystal Cores and Multiple-Nanosheet Shells of γ-Cyclodextrin Inclusion Complex Crystals

In this study, we prepared drug-loaded nanocarriers made of cholesteryl oleate (ChO) and γ-cyclodextrin (γ-CD). A nanosuspension (nanosuspension-I, NS-I) containing nanoparticles with a mean size of approximately 170 nm was obtained through the solvent-diffusion method using ethanol. A second nanosuspension (nanosuspension-II, NS-II), which was prepared by freeze-drying and redispersion of NS-I, exhibited an increased particle size of approximately 210 nm. Cryogenic transmission electron microscopy (cryo-TEM) and atomic force microscopy (AFM) force-distance curves indicated that the nanoparticles in NS-I were oblong and soft. However, those in NS-II were angular and stiff, and, interestingly, multiple nanosheets covered the solid-liquid interface. Synchrotron wide-angle X-ray diffraction (WAXD) analysis of NS-II indicated that the nanoparticles in it had a core-shell structure, where the ChO crystal in the inner core was covered by multiple nanosheets of ChO/γ-CD inclusion complex crystals. The X-ray peak analysis suggested that the γ-CD columns of the nanosheets were vertically stacked onto the ChO crystal interface. It was found that the nanosheets on the nanoparticle interface were formed during the freezing process. A model drug carbamazepine (CBZ) was loaded into the ChO/γ-CD nanoparticles by pre-dissolving CBZ in ethanol during the solvent-diffusion process. Cryo-TEM, ¹H NMR, ζ-potentials, and synchrotron WAXD indicated that CBZ was unexpectedly loaded into the shell as a CBZ/γ-CD inclusion complex crystalline nanosheet. The specific nanosheet structure, where ChO and CBZ coexisted in the same crystal of γ-CD, could achieve CBZ loading in the nanoparticles. ChO/γ-CD nanoparticles with the unique core-shell structure are expected to perform as practical carriers for drug delivery.

Multistep Crystallization of Pharmaceutical Amorphous Nanoparticles via a Cognate Pathway of Oriented Attachment: Direct Evidence of Nonclassical Crystallization for Organic Molecules

Crystallization of organic molecules is important in a wide range of scientific disciplines. However, in contrast to maturely studied crystallization of inorganic materials, the crystallization mechanisms of organic molecules involving nucleation and crystal growth are still poorly understood. Here, we used time-resolved cryogenic transmission electron microscopy to directly map the morphological evolution of amorphous cyclosporin A (CyA) nanoparticles during CyA crystallization. We successfully observed its initial nucleation and found that the amorphous CyA nanoparticles crystallized via a pathway cognate with oriented attachment, which is the nonclassical crystallization mechanism usually reported for inorganic compounds. Crystalline mesostructured intermediates (mesocrystals) were formed during crystallization. This study revealed clear and direct evidence of mesocrystal formation and oriented attachment in organic pharmaceuticals, providing new insights into the crystallization of organic molecules and theories of nonclassical crystallization.

Unusual Correlation between the Apparent Amorphous Solubility of a Drug and Solubilizer Concentration Revealed by NMR Analysis

Herein, we investigated the effect of the solubilizers, cetyltrimethylammonium bromide (CTAB) and amino methacrylate copolymer (Eudragit E PO, EUD-E), on the apparent amorphous solubility of ketoprofen (KTP) and free KTP concentrations in an aqueous phase when a KTP-rich phase was generated by liquid-liquid phase separation. Quantitative analysis by solution nuclear magnetic resonance (NMR) revealed that the apparent amorphous solubility of KTP increased with increasing EUD-E concentrations by the solubilization of KTP into the EUD-E micelles; this was reminiscent of the improvement in the apparent crystalline solubility of KTP observed when EUD-E was added. In contrast, the apparent amorphous solubility of KTP decreased with increasing CTAB concentrations, although the solubilizing ability of CTAB was stronger than that of EUD-E when the KTP-rich phase was absent. NMR analysis revealed that CTAB was distributed into the KTP-rich phase to a relatively large extent. This resulted in a significant reduction of the chemical potential of KTP in the KTP-rich phase in the CTAB solution. Thus, the maximum free KTP concentration in the aqueous phase was reduced more significantly in the CTAB solution than in the EUD-E solution. Moreover, the solubilization effect of KTP by the CTAB micelles in the aqueous phase was drastically diminished due to the distribution of CTAB into the KTP-rich phase. As a result, the apparent amorphous solubility of KTP reached a minimum at a CTAB concentration of 200 μg/mL. A further increase in the CTAB concentration resulted in an improvement in the apparent amorphous solubility of KTP due to the solubilization effect of CTAB remaining in the aqueous phase. The present study highlights the impact of solubilizer selection on the apparent amorphous solubility and attainable supersaturation of the drug, which should be considered during the development of supersaturating formulations to obtain preferable oral absorption.

Computational approach to elucidate the formation and stabilization mechanism of amorphous formulation using molecular dynamics simulation and fragment molecular orbital calculation

α-Glycosyl rutin (Rutin-G) consists of a flavonol skeleton and sugar groups and is a promising additive for amorphous formulations. In our previous study, experimental approaches suggested an interaction between the model drug carbamazepine (CBZ) and flavonol skeleton of Rutin-G that stabilizes amorphous formulations. In the present study, the formation and stabilization mechanisms of CBZ/Rutin-G amorphous formulation were investigated using a computational approach. The CBZ/Rutin-G amorphous formulation was obtained via molecular dynamics (MD) simulation, which mimicked the melt-quenching method. Root mean square deviation analysis revealed that the translational motion of CBZ during the cooling process was suppressed by adding Rutin-G. Monitoring the atomic distance during the cooling process revealed that hydrogen bonds via carboxamide oxygen of CBZ with hydroxyl hydrogen of Rutin-G were preferentially formed with flavonol skeletons than sugar groups. The simulated amorphous formulation was then calculated using fragment molecular orbital (FMO) method. The quantitative evaluation of multiple interactions revealed that the hydrogen bond energy was higher in CBZ-sugar groups than in CBZ-flavonol skeleton, while the π-type of interaction energy was higher in CBZ-flavonol skeleton than in CBZ-sugar groups. The computational approach combining MD simulation and FMO calculation provides information on various interactions that are difficult to detect using experimental approaches, which helps understand the formation and stabilization mechanism of amorphous formulations.

Transition from Amorphous Cyclosporin A Nanoparticles to Size-Reduced Stable Nanocrystals in a Poloxamer 407 Solution

Amorphous drug nanoparticles usually exhibit low storage stability. A comprehensive understanding of the molecular states and physicochemical properties of the product is indispensable for designing stable formulations. In the present study, an amorphous cyclosporin A (CyA) nanosuspension with a mean particle size of approximately 370 nm was prepared by wet bead milling with poloxamer 407 (P407). Interestingly, the prepared amorphous CyA nanoparticles were transformed into uniform CyA nanocrystals with a reduced mean particle size of approximately 200 nm during storage at 25 °C. The CyA nanocrystals were stably maintained for at least 1 month. The particle morphologies and molecular structures of the CyA nanosuspensions before and after storage were thoroughly characterized by cryogenic transmission electron microscopy and magic-angle spinning nuclear magnetic resonance spectroscopy, respectively. They revealed that the freshly prepared amorphous CyA nanoparticles (∼370 nm) were secondary particles composed of aggregated primary particles with an estimated size of 50 nm. A portion of P407 was found to be entrapped at the gaps between the primary particles due to aggregation, while most of P407 was dissolved in the solution either adsorbing at the solid/liquid interface or forming polymeric micelles. The entrapped P407 is considered to play an important role in the destabilization of the amorphous CyA nanoparticles. The resultant CyA nanocrystals (∼200 nm) were uniform single crystals of Form 2 hydrate and showed corner-truncated bipyramidal features. Owing to the narrow particle size distribution of the CyA nanocrystals, the rate of Ostwald ripening was slow, giving long-term stability to the CyA nanocrystals. This study provides new insights into the destabilization mechanism of amorphous drug nanoparticles.

A study combining magic-angle spinning NMR and small-angle X-ray scattering on the interaction in the mixture of poly(benzyl methacrylate) and ionic liquid 1-ethyl-3-methylimidazolium bis(trifluoromethanesulfonyl)amide

Despite being an LCST system, the NMR results indicate that the number of ionic liquid ions interacting with the solute polymer increases even at temperatures approaching the separation line.

Nanostructure and Molecular-Level Characterization of Aminoalkyl Methacrylate Copolymer and the Impact on Drug Solubilization Ability

The effects of pH changes and saccharin (SAC) addition on the nanostructure and mobility of the cationic aminoalkyl methacrylate copolymer Eudragit E PO (EUD-E) and its drug solubilization ability were investigated. Small-angle X-ray scattering performed using synchrotron radiation and atomic force microscopy showed that the EUD-E nanostructure, which has a size of approximately several nanometers, changed from a random coil structure at low pH (pH 4.0-5.0) to a partially folded structure at high pH (pH 5.5-6.5). The EUD-E also formed a partially folded structure in a wide pH range of 4.5-6.5 when SAC was present, and the coil-to-globule transition was moderate with pH increase, compared with that when SAC was absent. The equilibrium solubility of the neutral drug naringenin (NAR) was enhanced in the EUD-E solution and further increased as the pH increased. The enlargement of the hydrophobic region of EUD-E in association with the coil-to-globule transition led to efficient solubilization of NAR. The interaction with SAC enhanced the mobility of the EUD-E chains in the hydrophobic region of EUD-E, resulting in changes in the drug-solubilizing ability. ¹H high-resolution magic-angle spinning NMR measurements revealed that the solubilized NAR in the partially folded structure of EUD-E showed higher molecular mobility in the presence of SAC than in the absence of SAC. This study highlighted that solution pH and the presence of SAC significantly changed the drug solubilization ability of EUD-E, followed by changes in the EUD-E nanostructure, including its hydrophobic region.

Variable-Temperature NMR Analysis of the Thermodynamics of Polymer Partitioning between Aqueous and Drug-Rich Phases and Its Significance for Amorphous Formulations

We previously reported that the polymers used in amorphous solid dispersion (ASD) formulations, such as polyvinylpyrrolidone (PVP), polyvinylpyrrolidone/vinyl acetate (PVP-VA), and hypromellose (HPMC), distribute into the drug-rich phase of ibuprofen (IBP) formed by liquid-liquid phase separation, resulting in a reduction in the maximum drug supersaturation in the aqueous phase. Herein, the mechanism underlying the partitioning of the polymer into the drug-rich phase was investigated from a thermodynamic perspective. The dissolved IBP concentration in the aqueous phase and the amount of polymer distributed into the IBP-rich phase were quantitatively analyzed in IBP-supersaturated solutions containing different polymers using variable-temperature solution-state nuclear magnetic resonance (NMR) spectroscopy. The polymer weight ratio in the IBP-rich phase increased at higher temperatures, leading to a more notable reduction of IBP amorphous solubility. Among the polymers, the amorphous solubility reduction was the greatest for the PVP-VA solution at lower temperatures, while HPMC reduced the amorphous solubility to the greatest extent at higher temperatures. The change in the order of polymer impact on the amorphous solubility resulted from the differences in the temperature dependency of polymer partitioning. The van't Hoff plot of the polymer partition coefficient revealed that both enthalpy and entropy changes for polymer transfer into the IBP-rich phase from the aqueous phase (ΔH_{aqueous→IBP-rich} and ΔS_{aqueous→IBP-rich}) gave positive values for most of the measured temperature range, indicating that polymer partitioning into the IBP-rich phase was an endothermic but entropically favorable process. The polymer transfer into the IBP-rich phase was more endothermic for HPMC than for PVP and PVP-VA. The solid-state NMR analysis of the IBP/polymer ASD implied that the newly formed IBP/polymer interactions in the IBP-rich phase upon polymer incorporation were weaker for HPMC, providing a rationale for the larger positive transfer enthalpy for HPMC. The change in Gibbs free energy for polymer transfer (ΔG_{aqueous→IBP-rich}) showed negative values across the experimental temperature range, decreasing with an increase in temperature, indicating that the distribution of the polymer into the IBP-rich phase is favored at higher temperatures. Moreover, ΔG_{aqueous→IBP-rich} for HPMC showed the greatest decrease with the temperature, likely reflecting the temperature-induced dehydration of HPMC in the aqueous phase. This study contributes fundamental insights into the phenomenon of polymer partitioning into drug-rich phases, furthering the understanding of achievable supersaturation levels and ultimately providing information on polymer selection for ASD formulations.

Formation mechanism of amorphous drug nanoparticles using the antisolvent precipitation method elucidated by varying the preparation temperature

The present study focuses on the effect of the preparation temperature on the physicochemical properties of amorphous drug nanoparticles to clarify their formation mechanism. Amorphous glibenclamide (GLB) nanoparticles were prepared at 4-40 °C using two antisolvent precipitation methods. In method A, N,N-dimethylformamide (DMF) solution of GLB was added to an aqueous solution containing hydroxypropyl methylcellulose (HPMC) to obtain nano-A suspensions. In method B, nano-B suspensions were obtained by adding DMF solution containing both GLB and HPMC into water. When the preparation temperature was above 25 °C, nano-A and nano-B showed similar HPMC compositions. However, nano-B contained a large amount of HPMC compared to nano-A at temperatures below 20 °C. The glassy nature of the nanoparticle cores restricts the diffusion of HPMC from amorphous GLB nanoparticles to the aqueous phase, indicating that the glass transition temperature (T_g) of neat amorphous GLB (73 °C) would be considerably decreased owing to the nanosizing and water sorption of amorphous GLB. The physical stability of amorphous GLB nanoparticles was improved with increased HPMC in the nanoparticles. Thus, setting the preparation temperature by considering the T_g of the antisolvent-saturated amorphous drug nanoparticles is essential to develop stable amorphous drug nanoparticles.

Enteric complex layer-coated controlled release of capsaicin from phytosterol/γ-cyclodextrin microparticles via guest exchange reaction with taurocholic acid

Phytosterol (PSE)/γ-cyclodextrin (γ-CD) microparticles have a capsule-like structure, wherein the hydrophobic PSE core is surrounded by outer layers of the hydrophilic PSE/γ-CD inclusion complex crystal. The microparticles could mask the undesirable taste of capsaicin (CAP) by encapsulation of CAP into the microparticles. In the present study, the dissolution of CAP from PSE/γ-CD microparticles into artificial intestinal fluids was examined using the paddle method. The dissolution of CAP from the microparticles was suppressed at pH 1.2 and 5.0. On the other hand, the dissolution was significantly enhanced in fasted and fed state simulated intestinal fluid (FaSSIF and FeSSIF) . Taurocholate (TCA), contained in these artificial fluids, induced rapid dissolution of CAP from microparticles. The mechanism of CAP dissolution from the microparticles in the presence of TCA was investigated using in situ¹H NMR spectroscopy. During the incubation of the mixed suspension of the microparticles and TCA, γ-CD peaks started to appear, and the TCA peak showed a gradual upfield shift. Quantitative analysis of NMR results showed that the TCA/γ-CD inclusion complex could form during incubation, according to the dissolution of γ-CD from the microparticles via the guest exchange reaction of PSE by TCA. The collapse of the PSE/γ-CD inclusion complex crystal at the outer shell of microparticles could trigger the release of CAP into the intestinal fluid. Thus, PSE/γ-CD microparticles can be used as an enteric controlled-release system that releases encapsulated drugs not via the conventional pH changes but via guest exchange reaction with TCA.

[Solid State NMR Investigation for Molecular States of Specialized Formulation to Improve the Water Solubility of Poorly Water-soluble Drugs]

70-90% of recently developed new drug candidates are poorly soluble in water, which creates a series of thorny challenges in developing its oral dosage forms, resulting in low bioavailability. In pre-formulation study, various specialized formulations have been developed to improve drug solubility. Intermolecular interactions between drug and excipients in the formulations can modify the drug state and achieve the improvement of drug solubility. Therefore, the understanding of intermolecular interaction is essential to design formulations with higher quality and to assure the quality as a pharmaceutical product. Solid-state NMR has attracted much attention as a promising method to evaluate the molecular state of a drug and the interaction between a drug and excipient in its formulation. I have applied solid-state NMR and its characteristic technique, namely magic-angle spinning (MAS), for various specialized formulations including amorphous solid dispersion, supersaturated solution, drug-loaded organic nanotube, and drug nanosuspension. The intermolecular interactions of drug and excipient in amorphous solid dispersion have been identified by ¹³C and ¹⁵N solid-state NMR. High-resolution MAS determined the interaction modes of drug and excipient in a supersaturated solution. The two-step dissolution profile of drug from organic nanotube was understood, based on the molecular states revealed by the combination of various solid-state NMR techniques. A suspended-state NMR clarified the nanostructure of drug nanoparticles dispersed in water. It is expected that more qualified pharmaceutical formulations with improved drug solubility can be designed based on the remarkable development of recent solid-state NMR technology.

Revealing the mechanism of morphological variation of amorphous drug nanoparticles formed by aqueous dispersion of ternary solid dispersion

Probucol (PBC)/hypromellose (HPMC)/sodium dodecyl sulfate (SDS) ternary solid dispersions (SDs) of various weight ratios were prepared and evaluated to unveil the effect of HPMC and SDS on the formation of amorphous PBC nanoparticles. The morphological variation of the PBC nanoparticles prepared using SDs of different compositions was determined using dynamic light scattering and cryogenic transmission electron microscopy (cryo-TEM). Statistical analysis of particle size versus roundness of PBC nanoparticles was carried out based on cryo-TEM images. A clear correlation was observed between the morphologies of the PBC nanoparticles and the amounts of HPMC and SDS, either admixed in SDs or pre-dissolved in an aqueous solution. The admixed HPMC in SDs was demonstrated to play the major role in determining the primary particle sizes of discrete amorphous PBC nanoparticles. Based on ¹³C solid-state NMR spectroscopy, this phenomenon should be due to the enlarged size of the PBC-rich domains in SDs, which depended on the decreasing amounts of admixed HPMC. Although the pre-dissolved part of HPMC had less impact on the primary particle sizes, it was found to inhibit the particle agglomeration and recrystallization of amorphous PBC nanoparticles. On the other hand, sufficient SDS admixed in SDs could suppress the size enhancement of the PBC-rich domains during water immersion and nanoparticle evolution (agglomeration and crystallization) after aqueous dispersion. The pre-dissolved SDS could restrain the agglomeration of amorphous PBC nanoparticles, ultimately forming hundreds of irregular nanometer-order structures. Since the increase in size during water immersion, their sizes were still slightly larger than those obtained with a high portion of admixed SDS. The findings of this study clarified the usefulness and necessity of adding polymers and surfactants to SDs to fabricate drug nanoparticle formulations.

Amorphous Drug Solubility and Maximum Free Drug Concentrations in Cyclodextrin Solutions: A Quantitative Study Using NMR Diffusometry

Cyclodextrin (CD) has been widely used as a solubilizing agent for poorly water-soluble drugs. In the present study, the effect of CD on the amorphous drug solubility and the maximum thermodynamic activity of the drug in the aqueous phase when the drug concentration exceeded the liquid-liquid phase separation (LLPS) concentration was investigated using three chemically diverse CDs, β-cyclodextrin (β-CD), dimethyl-β-CD (DM-β-CD), and hydroxypropyl-β-CD (HP-β-CD). The amorphous solubility of ibuprofen (IBP) increased substantially linearly with the increase in the CD concentration due to IBP/CD complex formation. Surprisingly, although the crystalline solubility of IBP in the β-CD solution reached a plateau at β-CD concentrations above 3 mM (B_S-type solubility diagram) because of the limited crystalline solubility of the IBP/β-CD complex, the amorphous solubility of IBP increased linearly even when the β-CD concentration was higher than 3 mM. The amorphous solubility of IBP in CD solutions was influenced primarily by the phase separation of the IBP-supersaturated solution to the aqueous phase and the other phase mainly composed of IBP, namely, the IBP-rich phase, via LLPS. NMR spectroscopy revealed that DM-β-CD was distributed into the IBP-rich phase when the IBP concentration exceeded its amorphous solubility, while β-CD and HP-β-CD showed minimal mixing with the IBP-rich phase. NMR diffusometry showed that the maximum free IBP concentration was reduced in the DM-β-CD solution compared to that in the buffer. The mixing of DM-β-CD with the IBP-rich phase reduced the chemical potential of IBP in the IBP-rich phase, which in turn reduced the maximum thermodynamic activity of IBP in the aqueous phase. In contrast, the maximum free IBP concentration was unchanged when β-CD or HP-β-CD was present. The hydrophobic nature of the DM-β-CD substituent may contribute to its partitioning into the IBP-rich phase. The present study highlights the impact of CD on the maximum thermodynamic activity of drugs as well as the apparent amorphous solubility of the drug. This aspect should be considered for improving the effective absorption of poorly water-soluble drugs.

The nanostructure of rod-like ascorbyl dipalmitate nanoparticles stabilized by a small amount of DSPE-PEG

Previously, we reported the formation of 100-200 nm disk- and tube-like nanoparticles by hydration of _L-ascorbyl 2,6-dipalmitate (ASC-DP) and distearoylphosphatidylethanolamine polyethylene glycol 2000 (DSPE-PEG) films prepared at an initial molar ratio of 2:1. This study investigated the feasibility of nanoparticle formation with higher ASC-DP loading. Although particle size distribution determined by dynamic light scattering showed a multimodal pattern including micro-sized particles at a molar ratio of 3:1, the mean particle size gradually decreased with a further increased molar ratio. Homogeneous ca. 240 nm nanoparticles with a unimodal size distribution were obtained at a molar ratio of 10:1. FE-TEM showed that the nanoparticles at a molar ratio of 10:1 were rod-shaped with a diameter of ca. 100 nm and a length of ca. 300 nm. After centrifugation, X-ray analysis of the nanoparticle precipitates showed that these rod-like nanoparticles were composed of a series of lamellar structures with 3.7 nm repeated units. The molar ratio of ASC-DP/DSPE-PEG in the nanoparticle precipitates determined by ¹H NMR measurements was 68.8:1. The rod-like nanoparticles should be composed of a core-shell structure, where a small amount of DSPE-PEG covers the lamellar structure of ASC-DP. Further increase in the ASC-DP/DSPE-PEG molar ratio over 33:1 no longer provided nanoparticles. Hence, to prepare a stable ASC-DP nanoparticle suspension, it is necessary to prepare ASC-DP/DSPE-PEG films containing at least 3 mol% DSPE-PEG.

Unveiling the Interaction Potential Surface between Drug-Entrapped Polymeric Micelles Clarifying the High Drug Nanocarrier Efficiency

Polymeric micelles are invaluable media as drug nanocarriers. Although knowledge of an interaction between the micelles is a key to understanding the mechanisms and developing the superior functions, the interaction potential surface between drug-incorporated polymeric micelles has not yet been quantitatively evaluated due to the extremely complex structure. Here, the interaction potential surface between drug-entrapped polymeric micelles was unveiled by combining a small-angle scattering experiment and a model-potential-free liquid-state theory. Triblock copolymer composed of poly(ethylene oxide) and poly(propylene oxide) was investigated over a wide concentration range (0.5-10.0 wt %). Effects of the entrapment of a water-insoluble hydrophobic drug, cyclosporin A, on the interaction were explored by comparing the interactions with and without the drug. The results directly clarified the high drug carrier efficiency in terms of the interaction between the micelles. In addition, an investigation based on density functional theory provided a deeper insight into the monomer contribution to the extremely stable dispersion of the nanocarrier.

Mechanistic study of preparation of drug/polymer/surfactant ternary hot extrudates to obtain small and stable drug nanocrystal suspensions

We studied optimized conditions for preparing ternary hot extrudates (HEs) of glibenclamide (GLB)/polyvinylpyrrolidone (PVP)/sodium dodecyl sulfate to generate stable nanocrystal suspensions following aqueous dispersion. Raman and solid-state NMR measurements of ternary HEs prepared by altering HE conditions revealed that GLB crystallinity in HEs reduced with increased extrusion temperature and count and decreased screw speed. Aqueous dispersions of all HEs temporarily formed GLB nanoparticles with a diameter of 75-420 nm. The suspension from the HEs with the low GLB crystallinity (<22%) precipitated after 4-h storage, while the HEs with the high GLB crystallinity (>22%) formed stable nanocrystal suspension. Interestingly, the number of GLB nanoparticles <150  nm was different despite aqueous dispersion of HEs with similar GLB crystallinity, reflecting the different GLB crystalline size in those HEs. Although both the crushing by shear force and GLB dissolution into PVP reduced GLB crystalline size, the crushing GLB crystal by the shear force has a relatively high ability to decrease GLB crystalline size without excess amorphization of GLB. Performing the hot extrusion at a low temperature, a high screw speed, and maximizing extrusion count with GLB crystallinity >22% led to formation of small and stable nanocrystal suspensions.

Concrete with high-purity volcanic glass fine powder manufactured from pyroclastic deposit

Volcanic deposits, which are pozzolanically reactive, have long been known to improve the durability of concrete. Nevertheless, it has also been pointed out that the use of a natural pozzolan as a supplementary cementitious material (SCM) can pose problems of low workability and slow strength development. Also, in addition, its composition and physical properties have large variety and variability. We have been conducting studies on the total utilization of volcanic deposits for applications suitable for respective properties by classifying them by floating speed difference and particle diameter. It is reported that sorting out particles less than 2.4 g/cm3 by dry gravity classification and removal of smaller clay fraction by dust collector is technically effective to recover high purity volcanic glass from pyroclastic flow deposits called “Ito-Shirasu”, which is a local name for pyroclastic flow deposits in Japan. In this study, concrete containing high-purity volcanic glass powders with different finenesses are investigated regarding fresh properties, strength development, chloride ion penetration and CO2 reduction. As a result, it was found that volcanic glass powders made an excellent contribution to the improvement of flowability comparable to fly ash, the enhancement of strength comparable to silica fume, and the restraint of chloride ion penetration. Volcanic glass powders can also contrbute to the reduction of CO2 emission because the content of Portland cement can be significantly reduced to obtain the same strength compared to concrete with 100% Portland cement. This study provides a possibility to produce high performance SCMs in volcanic regions worldwide from volcanic ejecta by sorting out a high purity volcanic glass by the same method.

Application of solid-state 13C relaxation time to prediction of the recrystallization inhibition strength of polymers on amorphous felodipine at low polymer loading

The potential for inhibiting recrystallization with Eudragit® L (EUD-L), hypromellose acetate succinate (HPMC-AS), and polyvinylpyrrolidone-co-vinylacetate (PVP-VA) on amorphous felodipine (FLD) at low polymer loading was investigated in this study. The physical stabilities of the FLD/polymer amorphous solid dispersions (ASDs) were investigated through storage at 40 °C. The HPMC-AS and PVP-VA strongly inhibited FLD recrystallization, although EUD-L did not effectively inhibit the FLD recrystallization. The rotating frame ¹H spin-lattice relaxation time (¹H-T_1ρ) measurement clarified that EUD-L was not well mixed with FLD in the ASD, which resulted in weak inhibition of recrystallization by EUD-L. In contrast, the HPMC-AS and PVP-VA were well mixed with the FLD in the ASDs. Solid-state ¹³C spin-lattice relaxation time (¹³C-T₁) measurements at 40 °C showed that the molecular mobility of the FLD was strongly suppressed when mixed with polymer. The reduction in the molecular mobility of FLD was in the following order, starting with the least impact: FLD/EUD-L ASD, FLD/HPMC-AS ASD, and FLD/PVP-VA ASD. FLD mobility at the storage temperature, evaluated by ¹³C-T₁, showed a good correlation with the physical stability of the amorphous FLD. The direct investigation of the molecular mobility of amorphous drugs at the storage temperature by solid-state NMR relaxation time measurement can be a useful tool in selecting the most effective crystallization inhibitor at low polymer loading.

Intermolecular Interactions between Drugs and Aminoalkyl Methacrylate Copolymer in Solution to Enhance the Concentration of Poorly Water-Soluble Drugs

An aminoalkyl methacrylate copolymer, Eudragit^® E (EUD-E), has gained tremendous attention as a solid dispersion carrier because it efficiently stabilizes drugs in the amorphous state. Furthermore, EUD-E remarkably enhances drug dissolution in water. This review focuses on the interaction between drugs and EUD-E in solution, which contributes to the enhancement of drug concentration. Studies examining interactions between acidic drugs and EUD-E in organic solvents have revealed that the interaction occurs predominantly by electrostatic interaction, including hydrogen bonding and dipolar interactions. Other studies on interactions in aqueous solution found evidence for strong electrostatic interactions between acidic drugs and EUD-E in ion exchange experiments. ¹H-NMR studies using high-resolution magic-angle spinning, nuclear Overhauser effect spectroscopy, diffusion, and relaxation time measurements successfully identified the interaction site and strength in aqueous solution. Hydrophobic and ionic interactions occurred between drugs and EUD-E. The conformation of EUD-E, which was affected by the ionic strength and pH of the aqueous media, also influenced the interaction. The knowledge discussed in this review will be helpful in designing solid dispersion formulations with EUD-E, which will efficiently enhance drug concentration and subsequent absorption into the body.

Mechanistic elucidation of formation of drug-rich amorphous nanodroplets by dissolution of the solid dispersion formulation

Drug-rich amorphous nanodroplets have great potential to improve intestinal absorption of poorly water-soluble drugs. Spray-dried samples (SPDs) of glibenclamide (GLB) with hypromellose (HPMC) or hypromellose acetate succinate (HPMC-AS, grade AS-LF and AS-HF) were prepared to investigate how GLB-rich amorphous nanodroplets form during the dissolution of solid dispersions. The co-spray drying of AS-LF significantly enhanced GLB dissolution from the SPD, leading to the temporary formation of GLB-rich amorphous nanodroplets. However, the droplets gradually coarsened as AS-LF fails to inhibit coarsening. In contrast, the addition of HPMC to the SPD failed to aid GLB-rich amorphous nanodroplet formation during dissolution. The failure of formation of GLB-rich amorphous nanodroplet was caused by slow GLB dissolution, due to the poor controllability of the GLB dissolution by HPMC. The addition of AS-HF to the SPD produced amorphous GLB particles that contained a large amount of AS-HF during dissolution. Gel-like particles formed instead of GLB-rich amorphous nanodroplets. When the SPD containing AS-LF was dissolved in AS-HF solution, stably-dispersed GLB-rich amorphous nanodroplets were successfully formed owing to rapid GLB dissolution from the SPD containing AS-LF and strong coarsening inhibition by AS-HF. Formulation optimization considering both aqueous dissolution of the solid dispersion and the inhibition of nanodroplet coarsening achieved stably-dispersed drug-rich amorphous nanodroplets.

A Novel Drug-Drug Cocrystal of Levofloxacin and Metacetamol: Reduced Hygroscopicity and Improved Photostability of Levofloxacin

Levofloxacin (LVFX), a broad-spectrum antibacterial agent from the fluoroquinolone family, is universally prescribed with antipyretics, including paracetamol (APAP) analogs. In this study, a new drug-drug cocrystal of LVFX and an APAP analog was developed using a grinding and heating approach. Among 9 APAP analogs, only metacetamol (AMAP) was able to form a cocrystal with LVFX, with a stoichiometric ratio of 1:1. This cocrystal was obtained from a eutectic melt of anhydrous LVFX and AMAP after complete desorption of water from LVFX hemihydrate. The crystal structure of the cocrystal was determined by single-crystal X-ray structural analysis. Unlike LVFX hydrates, the LVFX-AMAP cocrystal did not form a channel structure where water molecules reside in LVFX hydrates. Thus, the LVFX-AMAP cocrystal did not undergo hydration under high relative humidity conditions during vapor sorption-desorption analysis and physical stability tests. LVFX photostability was improved by cocrystallization when compared with that of the hemihydrate because of hydrogen bond formation between the hydroxyl group of AMAP and the N-methylpiperazine group of LVFX, which is possibly involved in LVFX photodegradation. The LVFX-AMAP cocrystal, which is superior to LVFX hydrates in both pharmacological and physicochemical properties, is expected to be a useful solid form.

[Design Features in the Molecular-level Development of Solid Pharmaceutical Formulations Based on Supramolecular Structures]

We focused on the crystal structure of cyclodextrin (CD) to develop new solid CD complexes. There are two large spaces in the columnar structure of CD crystals: one inside a CD cavity and another between CD columns. New solid CD complexes can be designed by incorporating guest drugs between the CD columns. We succeeded in preparing a solid drug/[polyethylene glycol (PEG)/γ-CD-polypseudoraxane (PPRX)] complex by a sealed-heating method via the gas phase. A drug/(PEG/γ-CD-PPRX) complex has a structure in which PEGs are included in a γ-CD cavity, and guest drugs are incorporated between the γ-CD columns. Screening by a sealed-heating method determined that a variety of guest drugs with varying molecular size and log P could be incorporated into the spaces between γ-CD columns, following a stoichiometric rule. Another method, via solid phase using cogrinding and subsequent heating, was developed to prepare drug/(PEG/γ-CD-PPRX) complex. This method enabled us to prepare the complex with a thermally unstable drug, as well as a drug/(PEG/α-CD-PPRX) complex not formed using the sealed-heating method. Both the structure and molecular state of each drug in the complexes were characterized by powder X-ray diffraction and solid-state NMR measurements. The dissolution character and thermal stability of the drug incorporated in the complex could be improved by the specific complex formation. The solid CD complexes thus developed have potential for drug-encapsulation and as drug-release carriers, owing to their unique structural and pharmaceutical properties.

An Insight into Stabilization Mechanism of a Solid Dispersion of Indomethacin/Partially Hydrolyzed Polyvinyl Alcohol Prepared by Hot-Melt Extrusion

We examined the effect of hot-melt extrusion condition on the physical stability of the solid dispersion prepared using partially hydrolyzed polyvinyl alcohol (PVOH). The hot-melt extrusion of indomethacin (IMC) and PVOH mixed at the weight ratio of 3 : 7, 5 : 5 and 7 : 3 was performed either at 170 or 190°C to prepare the IMC/PVOH hot-melt extrudate (HME). Differential scanning calorimetry represented that IMC was mixed with PVOH on a scale of several tens of nanometer in all the HMEs with different weight ratio. ¹³C solid-state NMR measurement revealed that an intermolecular interaction was formed between a carboxylic group of IMC and a hydroxy group of PVOH in the HMEs. The intermolecular interaction in the HMEs was stronger at the higher extrusion temperature. At the low IMC loading, the IMC molecules could be mixed with the amorphous PVOH at the molecular level, and the remained PVOH without interaction formed the crystal phase. On the other hand, at the high IMC loading, most PVOH could be amorphized by the interaction with IMC, and the excess IMC which did not interact with PVOH formed the IMC-rich domain. The IMC/PVOH HME at the weight ratio of 7 : 3 extruded at higher extrusion temperature showed higher physical stability of amorphous IMC compared with that extruded at lower extrusion temperature. The hot-melt extrusion process at higher temperature provided the rapid melting of PVOH crystal phase, resulted in the homogeneous mixing with IMC and the formation of stronger intermolecular interaction.

Cancer-Type OATP1B3 mRNA in Extracellular Vesicles as a Promising Candidate for a Serum-Based Colorectal Cancer Biomarker

Cancer-type organic anion transporting polypeptide 1B3 (Ct-OATP1B3) mRNA is a variant isoform of the liver-type OATP1B3. Because Ct-OATP1B3 mRNA shows an excellent cancer-specific expression profile in colorectal cancer (CRC), and that its expression levels are associated with CRC prognosis, it holds the potential to become a useful CRC detection and diagnosis biomarker. While the potential is currently justified only at the tissue level, if existence of Ct-OATP1B3 mRNA in CRC-derived extracellular vesicles (EVs) is validated, the findings could enhance its translational potential as a CRC detection and diagnosis biomarker. Therefore, this study aims at proving that Ct-OATP1B3 mRNA exists in CRC-derived EVs, and can be detected using serum specimens. To examine the possibility of Ct-OATP1B3 mRNA being existed in extracellular milieu, we isolated EVs from the human CRC (HCT116, HT-29, and SW480) cell lines, and prepared their cDNAs. The RT-PCR results showed that Ct-OATP1B3 mRNA was clearly present in EVs derived from the human CRC cell lines. Then, in order to further explore the possibility that Ct-OATP1B3 mRNA in CRC-derived EVs can be detected in serum, we isolated serum EVs derived from human CRC xenograft mice, and then performed RT-PCR. The results showed that Ct-OATP1B3 mRNA could be found in all serum EV and CRC tissue samples of the mice examined. Collectively, our findings, which show that Ct-OATP1B3 mRNA exists in EVs and can be detected in (at least) mouse serum, strengthen the potential use of Ct-OATP1B3 mRNA as a serum-based CRC biomarker.

Microbes Culture System Using Cellulose Tubes and Photocatalyst-Coated Glass Balls

Currently, microbes are utilized in many fields, such as medicine, food and environment etc. For more application of microbes, we need a new culture system, which can culture target microbes in large quantities at low cost. Thereupon, we propose a culture system using cellulose tubes. Target microbes are encapsulated inside the cellulose tubes, where they acquire nutrients and oxygen through nano pores of the tubes and are protected from competitive microbes even in open environment. To further increase the amount of oxygen and nutritions available for the target microbes, we propose photocatalyst-coated glass balls (PCGB) to sterilize competing microbes outside the tubes. We experimentally verified the effectiveness of the proposed culture system by culturing Coryne gultamicum as the target microbes.