Design and Testing of Synthetic Catalytic Amyloids Based on the Active Site of Enzymes

The amyloid fold is nowadays recognized as an alternative conformation accessible to different proteins and peptides. The highly stable and ordered structural organization of amyloid fibrils can be exploited for the design of novel nanomaterials with emergent properties. Recent works have demonstrated that the functional features of the active site of enzymes can be partially recreated using this fold as a scaffold to develop catalytically active amyloids. We describe in this chapter a protocol to design functionally active amyloids that emerge from the self-assembly in vitro of synthetic peptides with sequences based on the active site of enzymes. Using this protocol, we show the development of amyloids that catalyze the metal-dependent hydrolysis of the phosphoanhydride bonds of nucleoside triphosphates.

Reactivity characterization of SiO2-coated nano zero-valent iron for iodoacetamide degradation: The effects of SiO2 thickness, and the roles of dehalogenation, hydrolysis and adsorption

The effect of SiO₂-layer thickness in SiO₂-coated nano zero-valent iron (nZVI) particles on the reactivity characteristics of iodoacetamide (IAcAm) degradation was evaluated. SiO₂-layer thicknesses ranging from 3.6 to 27.3 nm were obtained through varying tetraethyl orthosilicate dosages of 0.001-1 M. The crystallinity, surface chemical composition, and physicochemical properties were evaluated for their effects on synergetic degradation mechanisms, dehalogenation, hydrolysis, and adsorption. At a thickness of 3.6 nm, the SiO₂ layer offered the highest observed pseudo-first-order rate (k_obs) and higher rates of IAcAm degradation were maintained under pH fluctuations (pH 5-7) and aerobic conditions compared to pristine nZVI. At this SiO₂-layer thickness (3.6 nm), the rate of iron oxide-layer formation was reduced and the migration of reactive iron species (Fe⁰ and Fe²⁺) for the dehalogenation and hydrolysis reactions was enabled. In a single-solute solution, IAcAm elimination was greater than bromoacetamide and chloroacetamide elimination due to the weak ionic I-C bond. In mixed solute conditions, the hydrophobicity of chloroacetamide played a more significant role in competitive degradation through greater adsorption. The proportion of dehalogenation relative to hydrolysis during IAcAm degradation by pristine nZVI and SiO₂-coated nZVI was approximately 0.6:0.4. Iodoacetic acid and acetic acid were detected as intermediates in the degradation pathway of IAcAm by pristine nZVI. In contrast, the SiO₂ layer on nZVI can accelerate the transformation of IAcAm to acetamide and iodoacetic acid. The electrolyte background of tap water exhibited a slight inhibitory effect on the degradation of IAcAm for both nZVI and SiO₂-coated nZVI.

Stability of lipids in plasma and serum: Effects of temperature-related storage conditions on the human lipidome

Large epidemiological studies often require sample transportation and storage, presenting unique considerations when applying advanced lipidomics techniques. The goal of this study was to acquire lipidomics data on plasma and serum samples stored at potential preanalytical conditions (e.g., thawing, extracting, evaporating), systematically monitoring lipid species for a period of one month. Split aliquots of 10 plasma samples and 10 serum samples from healthy individuals were kept in three temperature-related environments: refrigerator, laboratory benchtop, or heated incubator. Samples were analyzed at six different time points over 28 days using a Bligh & Dyer lipid extraction protocol followed by direct infusion into a lipidomics platform using differential mobility with tandem mass spectrometry. The observed concentration changes over time were evaluated relative to method and inter-individual biological variability. In addition, to evaluate the effect of lipase enzyme levels on concentration changes during storage, we compared corresponding fasting and post-prandial plasma samples collected from 5 individuals. Based on our data, a series of low abundance free fatty acid (FFA), diacylglycerol (DAG), and cholesteryl ester (CE) species were identified as potential analytical markers for degradation. These FFA and DAG species are typically produced by endogenous lipases from numerous triacylglycerols (TAGs), and certain high abundance phosphatidylcholines (PCs). The low concentration CEs, which appeared to increase several fold, were likely mass-isobars from oxidation of other high concentration CEs. Although the concentration changes of the high abundant TAG, PC, and CE precursors remained within method variability, the concentration trends of FFA, DAG, and oxidized CE products should be systematically monitored over time to inform analysts about possible pre-analytical biases due to degradation in the study sample sets.

Optimization of ultrasound-assisted enzymatic pretreatment for enhanced extraction of baicalein and wogonin from Scutellaria baicalensis roots

It is of great theoretical interest and industrial significance to improve the extraction efficiency of baicalein and wogonin from Scutellaria baicalensis roots because of their high pharmacological activities. The present study was aimed to establish the optimized ultrasound-assisted enzymatic pretreatment (UAEP) process by which ultrasound irradiation and the exogenous enzyme were simultaneously applied to efficiently transform baicalin and wogonoside into baicalein and wogonin, enhancing their extraction efficiency. Single-factor experiment and Box-Behnken design were used to optimize the main UAEP conditions to maximize the total extraction yield of baicalein and wogonin. The optimized UAEP conditions were cellulase concentration of 1.1%, pH of 5.5, UAEP temperature of 56.5 °C, UAEP time of 39.4 min, and ultrasonic power of 200 W with the total extraction yield of 82.51 ± 0.85 mg/g DW. The comparison of the established technique with the reference method based on the enzymatic pretreatment revealed that the productive efficiency was significantly improved with the transformation rates nearly doubled. These results suggest that the optimized UAEP process has the potential to be applied for the green, simple, and efficient extraction of baicalein and wogonin in the pharmaceutical and food industry.

Preparation and characterization of waxy maize starch nanoparticles via hydrochloric acid vapor hydrolysis combined with ultrasonication treatment

The objective of this work was to develop a simple and efficient method to prepare waxy maize starch nanoparticles (SNPs) by hydrochloric acid (HCl) vapor hydrolysis combined with ultrasonication treatment. The size, morphology, thermal property, and crystal structure of the SNPs were systematically studied. HCl treatment introduces a smaller particle diameter of starch particles from 13.73 ± 0.93 μm to 1.52 ± 0.01-8.32 ± 0.63 μm. Further ultrasonication treatment formed SNPs that displayed desirable uniformity and near-perfect spherical and ellipsoidal shapes with a diameter of 150.65 ± 1.91-292.85 ± 0.07 nm. The highest yield of SNPs was 80.5%. Compared with the native starch, the gelatinization enthalpy changes of SNPs significantly decreased from 14.65 ± 1.58 J/g to 7.40 ± 1.27 J/g. Interestingly, the SNPs showed a wider melting temperature range of 22.77 ± 2.35 °C than native starch (10.94 ± 0.87 °C). The relative crystallinity of SNPs decreased to 29.65%, while long-time ultrasonication resulted in amorphization. HCl vapor hydrolysis combined with ultrasonication treatment can be an affordable and accessible method for the efficient large-scale production of SNPs. The SNPs developed by this method will have potential applications in the food, materials, and medicine industries.

Removing chlorinated haloacetaldehydes from drinking water by household heating devices with and without chlorine: Efficiency, influencing factors, and mechanisms

Haloacetaldehyde (HAL) is a type of disinfection byproduct (DBP) commonly detected in disinfected drinking water, and concerns toward its cytotoxic effects have promoted numerous efforts to control it. Given that household water treatment (HWT) process is a promising approach to polish drinking water quality and has been widely used by public, we herein evaluated the performances of two household heating devices (electric kettle and microwave oven) on the removals of three types of chlorinated haloacetaldehydes (Cl-HALs) under varying operating and water conditions. Results showed that the removals of HALs by boiling water to 100 °C were not very efficient (<20%) under automatic switch-off mode when chlorine was absent. The key mechanism responsible for Cl-HALs loss was likely volatilization because altering heating or cooling time did not enhance Cl-HALs' attenuations significantly. In contrast, Cl-HALs were readily transformed (>80%) when 1.0 mg/L chlorine was present without prolonging boiling time. Adding chlorine quencher (ascorbic acid) inhibited Cl-HALs' removals substantially, confirming that chlorine played a key role in the transformation process. The reactions between Cl-HALs and chlorine can be accelerated by raising water temperature and chlorine dosage. Stepwisely, monochloroacetaldehyde was transformed into dichloroacetaldehyde (DCAL), then DCAL was converted into trichloroacetaldehyde (TCAL), and eventually the C-C bond of TCAL was cleaved to form trichloromethane and formic acid. The study hence explains the differences on the removals of Cl-HALs between with and without adding chlorine and meanwhile identifies the limits of domestic heating devices in removing Cl-HALs from drinking water.

Unraveling the unique butyrate re-assimilation mechanism of Clostridium sp. strain WK and the application of butanol production from red seaweed Gelidium amansii through a distinct acidolytic pretreatment

Exploration of the algae-derived biobutanol synthesis has become one of the hotspots due to its highly cost-effective and environment-friendly features. In this study, a solventogenic strain Clostridium sp. strain WK produced 13.96 g/L butanol with a maximal yield of 0.41 g/g from glucose in the presence of 24 g/L butyrate. Transcriptional analysis indicated that the acid re-assimilation of this strain was predominantly regulated by genes buk-ptb rather than ctfAB, explaining its special phenotypes including high butyrate tolerance and the pH-independent fermentation. In addition, a butyric acid-mediated hydrolytic system was established for the first time to release a maximal yield of 0.35 g/g reducing sugars from the red algal biomass (Gelidium amansii). Moreover, 4.48 g/L of butanol was finally achieved with a significant enhancement by 29.9 folds. This work reveals an unconventional metabolic pathway for butanol synthesis in strain WK, and demonstrates the feasibility to develop renewable biofuels from marine resources.

Hydrothermal co-hydrolysis of corncob/sugarcane bagasse/Broussonetia papyrifera blends: Kinetics, thermodynamics and fermentation

Biorefinery of biomass blends can achieve sustainable development of biofuel production. Herein, three lignocellulosic wastes with significant differences in chemical composition-namely corncob (CC), sugarcane bagasse (SB), and Broussonetia papyrifera (BP)-were selected to investigate their hydrothermal co-hydrolysis kinetics and thermodynamics of different biomass blends. Activation energies of hemicellulose decomposition (Ea₁, 90.59 kJ/mol) for CC/SB were lower than those for CC (126.12 kJ/mol) and CC/SB/BP (153.62 kJ/mol). BP (having a high content of nitrogen sources) loading weakened the acidic autohydrolysis of CC/SB hemicellulose, but yielded stable products as indicated by the negative entropy value for CC/SB/BP hydrolysis. Cumulative feedback inhibition occurred among different biomass, and it could be minimized by controlling the blending ratio. The highest total xylose yield was 83.64% for CC/SB with a mass ratio of 2:1. Moreover, biomass blend of CC/SB/BP enabled complete utilization of hexose, pentose and amino acids by co-production of ethanol and microalga biomass.

Effect of microaerophilic treatment on swine wastewater (SWW) treatment: Engineering and microbiological aspects

The microaerobic process on swine wastewater (SWW) treatment was investigated, evaluating its effect on organic matter hydrolysis and removal, biogas production, operational stability, and microbial community structure. UASB reactors operating under higher organic loading rates (OLRs) and lower hydraulic retention times (HRTs) than those found in the SWW treatment literature were also assessed. The microaerophilic reactor R2 presented a higher total and particulate organic matter removals and operational stability than the anaerobic reactor R1, reaching COD_P removals of 79.4 ± 4.6%. In the specific methanogenic activity (SMA) tests, the microaerobic sludge (R2) showed hydrolytic and acetogenic/methanogenic activity superior to inoculum and anaerobic sludge (R1). The microbiological evaluation of R2 revealed the high presence of hydrolytic microorganisms, therefore justifying the higher hydrolytic activity found in the SMA tests and higher particulate organic matter removal found in the microaerobic reactor.

Synthesis and Hydrogen-Bond Patterns of Aryl-Group Substituted Silanediols and -triols from Alkoxy- and Chlorosilanes

Organosilanols typically show a high condensation tendency and only exist as stable isolable molecules under very specific steric and electronic conditions at the silicon atom. In the present work, various novel representatives of this class of compounds were synthesized by hydrolysis of alkoxy‐ or chlorosilanes. Phenyl, 1‐naphthyl, and 9‐phenanthrenyl substituents at the silicon atom were applied to systematically study the influence of the aromatic substituents on the structure and reactivity of the compounds. Chemical shifts in ²⁹Si NMR spectroscopy in solution, correlated well with the expected electronic situation induced by the substitution pattern on the Si atom. ¹H NMR studies allowed the detection of strong intermolecular hydrogen bonds. Single‐crystal X‐ray structures of the alkoxides and the chlorosilanes are dominated by π‐π interactions of the aromatic systems, which are substituted by strong hydrogen bonding interactions representing various structural motifs in the respective silanol structures.

The role of hydrolysis in biological effects of molybdenum cluster with DMSO ligands

Biological applications of octahedral molybdenum cluster complexes are complicated by their hydrolytic instability, since hydrolysis leads to irreversible changes in the structure and properties of these compounds. On the other hand, if such changes are thoroughly investigated and understood, the hydrolysis process can become an important tool for regulating specific biological effects of the clusters. In this work, we demonstrate how the luminescence and biological properties (cellular uptake, cytotoxicity in the dark and photodynamic effect) of highly unstable cluster complex [{Mo₆I₈}(DMSO)₆](NO₃)₄ change along with the degree of hydrolysis. Particularly, cluster solution preliminarily aged in water demonstrated lower dark and higher photoinduced cytotoxicity and higher cellular uptake in comparison with fresh solution.

A Peptide Bond from the Inter-lobe Segment in the Bilobal Lactoferrin Acts as a Preferred Site for Cleavage for Serine Proteases to Generate the Perfect C-lobe: Structure of the Pepsin Hydrolyzed Lactoferrin C-lobe at 2.28 Å Resolution

C-lobe represents the C-terminal half of lactoferrin which is a bilobal 80 kDa iron binding glycoprotein. The two lobes are designated as N-lobe (Ser1-Glu333) and C-lobe (Arg344-Arg689). The N- and C-lobes are connected by a 10-residue long α-helical peptide (Thr334-Thr343). Both lobes adopt similar conformations and have identical iron binding sites. The bilobal lactoferrin was hydrolyzed in a limited proteolysis using pepsin at pH 2.0. It produced a 40 kDa and fully functional C-lobe which was purified and crystallized at pH 8.0. The structure determination revealed that the structure contained residues from Tyr342 to Arg689 representing a fully functional monoferric C-lobe. It showed that pepsin cleaved lactoferrin at the peptide bond Arg341-Tyr342 which is part of the inter-lobe decapeptide. Interestingly, the two previously determined structures of the enzymatically produced C-lobe using trypsin and proteinase K also cleaved lactoferrin at the same peptide bond Arg341-Tyr342. This was a striking result as the three enzymes, pepsin, trypsin and proteinase K have different specificity requirements and yet they cleaved the bilobal lactoferrin at the same peptide bond and generated an identical and fully functional C-lobe. This shows that the observed cleavage site in lactoferrin adopts a highly favourable conformation for proteolysis. It is noteworthy that the three enzymes with different specificities cut the protein at the same peptide bond which may be of physiological significance because the antibacterial action of lactoferrin is extended further through the C-lobe.

Hydrolysis of waste polyethylene terephthalate catalyzed by easily recyclable terephthalic acid

Hydrolysis of polyethylene terephthalate (PET) is an efficient strategy for the depolymerization of waste PET to terephthalic acid (TPA), which can be used as a fundamental building block for the repolymerization of PET or for the synthesis of biodegradable plastics and metal-organic frameworks. However, most of the reported hydrolysis catalysts are strong acids or bases, which are soluble in reaction media and difficult to separate after the reaction, leading to high production costs and a profound influence on the environment. Herein, we propose the use of TPA, the basic unit of PET, as an acid catalyst to promote the hydrolysis of PET. Under optimized conditions, i.e., 2.5 g of PET, a TPA concentration of 0.1 g/mL, mass ratio PET:H₂O of 1:8, 220 °C of temperature, and 180 min of reaction time, a PET conversion of up to 100.0% and a TPA yield of 95.5% were achieved. Furthermore, the produced TPA exhibited a high purity of 99%, similar to that of fresh TPA, and was easily recoverable for PET hydrolysis without tedious workup and purification processes. More importantly, the hydrolysis efficiency was maintained over eight consecutive reaction cycles. Overall, this study provides a green, easy, and low-cost technology to recover and reuse TPA for waste PET hydrolysis.

Bioconversion of renewable lignocellulosic biomass into multicomponent substrate via pressurized hot water pretreatment for bioplastic polyhydroxyalkanoate accumulation

The pretreatment of lignocellulosic biomass (LB) has become an important process to reduce the cost of polyhydroxyalkanoate (PHA) production. In this study, an economical and effective pressurized hot water pretreatment was used to investigate on bioconversion of four typical LB (rubber wood, sugarcane bagasse, sorghum stalk, cassava stalk) into reducing sugar, then as feedstock to accumulate PHA by mixed microbial cultures. The results showed that pretreatment changed the surface morphology of LB and further improved saccharification efficiency. The maximum reducing sugar yield of 620.7 mg·g^-1 (438.7 mg·g^-1 glucose and 178.0 mg·g^-1 xylose) was obtained by rubber wood. The conversion of cellulose and hemicellulose reached 83.10% and 78.22%. Moreover, PHA content reached the maximum of 773.2 mg COD·L^-1 in the operation cycle of 24 h. The results demonstrated that hot water pretreatment was an effective physical process to improve the saccharification efficiency of LB for reducing the cost of PHA.

Assessing the polysorbate degradation fingerprints and kinetics of lipases - how the activity of polysorbate degrading hydrolases is influenced by the assay and assay conditions

Two of the most widely used surfactants to stabilize biologicals against e.g. interfacial stresses are polysorbate 20 (PS20) and polysorbate 80 (PS80). In recent years, numerous cases of hydrolytic polysorbate (PS) degradation in liquid formulations of biopharmaceuticals have been observed. Concomitant with the degradation of PSs, formulated proteins become inherently instable and more susceptible to aggregation. Furthermore, poorly soluble fatty acids (FA) are released from the PSs, which might lead to FA precipitation and the formation of visible and subvisible particles. Therefore, possible particle inducing factors have to be monitored closely. The major root cause of hydrolytic PS degradation in biologicals is the presence of enzymatic active host cell proteins (HCP), like lipases and esterases, which are co-purified with the active pharmaceutical ingredient. Such contaminants can be detected via their hydrolytic activity, either using ester-based substrates or PS itself. However, each approach has its up- and downsides, which makes the comparison of the results from other publications difficult. It was therefore the aim of the present study to investigate the impact of lipase specificities on the assay readouts. This study evaluates three different surrogate (model) lipases with distinctively different degradation kinetics and substrate specificities using specific analytical methods. The analytical panel contains on one hand two lipase activity assays with ester-based substrates, either detecting the release of para-nitrophenol or 4-methylumbelliferone, and on the other hand two PS-based monitoring analyses (fluorescence micelle assay and reverse phase high performance liquid chromatography - charged aerosol detection), which detect hydrolytic "activity" directly in the target substrate. Thereby, strengths and weaknesses of each assay are discussed, and recommendations are made for the respective use cases. Our results show that the determined lipase activities vary not only from assay to assay, but also significantly for the lipase tested, thus showing a different degradation fingerprint in the RP-HPLC-CAD chromatogram. This demonstrates that a comprehensive monitoring approach is essential to assess potential HCP contaminations.

Multicomponent nanoparticles as means to improve anaerobic digestion performance

Sufficient quantity of trace metals is essential for a well performing anaerobic digestion (AD) process. Among the essential trace elements in active sites of multiple important enzymes for AD are iron and nickel ions. In the present study, iron and nickel in the form of Fe₂O₃ and NiO were coated on TiO₂ nanoparticles to be used in batch and continuous operation mode. The effect of TiO₂, Fe₂O₃-TiO₂, and NiO-TiO₂ nanoparticles on each step of AD process was assessed utilizing simple substrates (i.e. cellulose, glucose, acetic acid, and mixture of H₂-CO₂) as well as complex ones (i.e. municipal biopulp). The hydrolysis rate of cellulose substrate increased with higher dosages of the coated TiO₂ with both metals. For instance, the hydrolysis rate was increased up to 54% at Fe₂O₃-TiO₂ and at a concentration of 23.5 mg/L for NiO-TiO₂ it was increased up to 58%, while higher dosage suppressed the hydrolytic activity. Experimental results revealed that low dosages of NiO-TiO₂ increased the accumulated methane production up to 24% probably by increasing the enzymatic activity of acetoclastic methanogenesis. NiO-TiO₂ showed positive effect on batch and continuous AD of biopulp and improved methane yield up to 8%.

Structure-dependent surface catalytic degradation of cephalosporin antibiotics on the aged polyvinyl chloride microplastics

Microplastics (MPs) have been recognized as a global concern due to their potential health effect, as MPs could adsorb and carry various pollutants in aquatic environment. In the present study, a new environmental behavior related to polyvinyl chloride microplastics (PVC-MPs) and the underlying mechanism were described. Our results showed that the photo-aged PVC-MPs could affect the transformation of cephalosporin antibiotics. For instance, the presence of altered PVC-MPs significantly accelerated the hydrolysis of cefazolin (CFZ), but exhibited negligible effect on the degradation of cephalexin (CFX). As indicated by in situ Fourier transform infrared spectra and theoretical calculations, hydrogen bonds could be formed between β-lactam carbonyl of CFZ and the oxygen-containing moieties on the aged PVC-MP surfaces. The hydrogen-bonding was able to significantly increase the positive atomic Mulliken charge on the β-lactam carbonyl carbon, thus narrowing the energy gap of CFZ hydrolysis and subsequently enhancing the disruption of β-lactam ring. While for CFX, instead of the β-lactam carbonyl, the amide amino group was involved in the hydrogen-bonding due to the structural difference. Therefore, in addition to increasing the adsorption capacity, the aged PVC-MPs could act as the catalyst to mediate the transformation of antibiotics. Our study would help improve the understanding for interactions between contaminants and MPs in natural environments.

A review on enzymes and pathways for manufacturing polyhydroxybutyrate from lignocellulosic materials

Currently, major focus in the biopolymer field is being drawn on the exploitation of plant-based resources grounded on holistic sustainability trends to produce novel, affordable, biocompatible and environmentally safe polyhydroxyalkanoate biopolymers. The global PHA market, estimated at USD 62 Million in 2020, is predicted to grow by 11.2 and 14.2% between 2020-2024 and 2020-2025 correspondingly based on market research reports. The market is primarily driven by the growing demand for PHA products by the food packaging, biomedical, pharmaceutical, biofuel and agricultural sectors. One of the key limitations in the growth of the PHA market is the significantly higher production costs associated with pure carbon raw materials as compared to traditional polymers. Nonetheless, considerations such as consumer awareness on the toxicity of petroleum-based plastics and strict government regulations towards the prohibition of the use and trade of synthetic plastics are expected to boost the market growth rate. This study throws light on the production of polyhydroxybutyrate from lignocellulosic biomass using environmentally benign techniques via enzyme and microbial activities to assess its feasibility as a green substitute to conventional plastics. The novelty of the present study is to highlight the recent advances, pretreatment techniques to reduce the recalcitrance of lignocellulosic biomass such as dilute and concentrated acidic pretreatment, alkaline pretreatment, steam explosion, ammonia fibre explosion (AFEX), ball milling, biological pretreatment as well as novel emerging pretreatment techniques notably, high-pressure homogenizer, electron beam, high hydrostatic pressure, co-solvent enhanced lignocellulosic fractionation (CELF) pulsed-electric field, low temperature steep delignification (LTSD), microwave and ultrasound technologies. Additionally, inhibitory compounds and detoxification routes, fermentation downstream processes, life cycle and environmental impacts of recovered natural biopolymers, review green procurement policies in various countries, PHA strategies in line with the United Nations Sustainable Development Goals (SDGs) along with the fate of the spent polyhydroxybutyrate are outlined.

Arylacetamide deacetylase as a determinant of the hydrolysis and activation of abiraterone acetate in mice and humans

AIM

Abiraterone acetate for metastatic castration-resistant prostate cancer is an acetylated prodrug to be hydrolyzed to abiraterone. Abiraterone acetate is known to be hydrolyzed by pancreatic cholesterol esterase secreted into the intestinal lumen. This study aimed to investigate the possibility that arylacetamide deacetylase (AADAC) expressed in enterocytes contributes to the hydrolysis of abiraterone acetate based on its substrate preference.

MATERIALS AND METHODS

Abiraterone acetate hydrolase activity was measured using human intestinal (HIM) and liver microsomes (HLM) as well as recombinant AADAC. Correlation analysis between activity and AADAC expression was performed in 14 individual HIMs. The in vivo pharmacokinetics of abiraterone acetate was examined using wild-type and Aadac knockout mice administered abiraterone acetate with or without orlistat, a pancreatic cholesterol esterase inhibitor.

KEY FINDINGS

Recombinant AADAC showed abiraterone acetate hydrolase activity with similar Km value to HIM and HLM. The positive correlation between activity and AADAC levels in individual HIMs supported the responsibility of AADAC for abiraterone acetate hydrolysis. The area under the plasma concentration-time curve (AUC) of abiraterone after oral administration of abiraterone acetate in Aadac knockout mice was 38% lower than that in wild-type mice. The involvement of pancreatic cholesterol esterase in abiraterone formation was revealed by the decreased AUC of abiraterone by coadministration of orlistat. Orlistat potently inhibited AADAC, implying its potential as a perpetrator of drug-drug interactions.

SIGNIFICANCE

AADAC is responsible for the hydrolysis of abiraterone acetate in the intestine and liver, suggesting that concomitant use of abiraterone acetate and drugs potently inhibiting AADAC should be avoided.

Intensified wheat husk conversion employing energy-efficient hybrid electromagnetic radiations for production of fermentable sugar: process optimization and life cycle assessment

This article reports an energy-efficient green pathway for the sustainable conversion of an abundant agro-residue viz. wheat husk (WH) into fermentable sugar (FS). The intensification effects of tungsten-halogen (TH) (150 W) and ultraviolet (UV) (100 W) irradiations on the pretreatment and subsequent hydrolysis of WH have been experimented with and optimized by Taguchi Orthogonal Design Array (TODA). In this study, two commercial catalysts, viz. Amberlyst-15 (A15) and nano-anataseTiO₂ (NAT) have been used in varying concentrations for the WH conversion process in a novel TH-UV radiated rotating reactor (THUVRR). At optimized peracetic acid pretreatment conditions [90 °C reaction temperature; 1: 2.5 w/w of WH: H₂O₂; 1: 5 w/w of WH: CH₃COOH (1 M); 2h of reaction time] maximum 20.2 wt. % FS yield and 15 wt. % isolated lignin (purity 97.6 %) were obtained. Subsequently, the pretreated WH (PWH) was hydrolyzed at optimized conditions [(70⁰C reaction temperature; 7.5wt. % catalyst concentration (1:1 w/w A15: NAT); 1: 30 w/w of WH: water; 30 min reaction time)] in THUVRR to render maximum yield of FS (36.9g/ L) (67.4 wt. %), which was significantly greater than that obtained (20.2g/ L) (38.42 wt. %) employing a conventional thermal reactor (CTR). Besides, the energy consumption was 70% more in CTR (500 W) in comparison with THUVRR (150 W); thus, demonstrating markedly superior energy-efficiency vis-à-vis appreciable improvement in FS yield in THUVRR over CTR. Overall sustainability of the process analyzed by LCA proved the approach to be energy-saving and environmentally benign and is expected to be applicable to similar lignocellulosic agro-wastes.

Economizing the lignocellulosic hydrolysis process using heterologously expressed auxiliary enzymes feruloyl esterase D (CE1) and β-xylosidase (GH43) derived from thermophilic fungi Scytalidium thermophilum

Two lignocellulolytic accessory enzymes, feruloyl esterase D (FAED_SCYTH) and β-xylosidase (XYL43B_SCYTH) were cloned and produced in the Pichia pastoris X33 as host. The molecular weight of recombinant enzymes FAED_SCYTH and XYL43B_SCYTH were ~ 31 and 40 kDa, respectively. FAED_SCYTH showed optimal activity at pH 6.0, 60 °C; and XYL43B_SCYTH at pH 7.0, 50 °C. FAED_SCYTH and XYL43B_SCYTH exhibited t_1/2: 4 and 0.5 h, respectively (50 °C, pH 5.0). The β-xylosidase was bi-functional with pronounced activity against pNP-α-arabinofuranoside besides being highly xylose tolerant (retaining ~ 97% activity in the presence of 700 mM xylose). Cocktails prepared using these enzymes along with AA9 protein (PMO9D_SCYTH) and commercial cellulase CellicCTec2, showed improved hydrolysis of the pre-treated lignocellulosic biomass. Priming of pre-treated lignocellulosic biomass with these accessory enzymes was found to further enhance the hydrolytic potential of CellicCTec2 promising to reduce the enzyme load and cost required for obtaining sugars from biorefinery relevant pre-treated substrates.

Hydrolytic stability of anticancer drugs and one metabolite in the aquatic environment

Due to the genotoxic, carcinogenic and teratogenic mechanism of action, anticancer drugs are highly hazardous compounds. Their occurrence, fate, and effects in the environment have not been systematically studied as compared to other medicaments. Therefore, reliable data, including their stability and persistency, is required in order to assess it. Taking into account, that hydrolysis is one of the most important factors regarding stability of chemicals in water, the aim of our study was to investigate the hydrolytic stability of five commonly used anticancer drugs (ifosfamide, cyclophosphamide, 5-fluorouracil, imatinib, and methotrexate) and one metabolite (7-hydroxymethotrexate), as the systematized and coherent data available is limited. The hydrolysis studies have been prepared according to the OECD 111 procedure to obtain standardized and comparable results. The preliminary tests at pH 4, 7, and 9 and 50 °C show that only cyclophosphamide and ifosfamide are unstable, whereas the estimated t_1/2 at 25 °C is >1 year for other investigated compounds. Moreover, much more detailed experiments were performed and indicate that at environmentally relevant temperatures, cyclophosphamide, and ifosfamide would be quite persistent in the terms of hydrolytic stability. Moreover, the preliminary investigation on the hydrolysis products was performed.

Antimicrobial electrospun nanofiber mats of NaOH-hydrolyzed chitosan (HCS)/PVP/PVA incorporated with in-situ synthesized AgNPs: Fabrication, characterization, and antibacterial activity

This work aims to improve the electrospinability and antibacterial activity of chitosan (CS) - based nanofibers. Three approaches consisting of reducing molecular weight of CS by NaOH hydrolysis (HCS), blending with two carrying polymers (polyvinylpyrrolidone (PVP) and polyvinyl alcohol (PVA)) and incorporating with in-situ synthesized silver nanoparticles (AgNPs) were integrated simultaneously for the first time to fabricate the HCS-AgNPs/PVP/PVA multicomponent nanofibers. The electrospinning parameters were optimized to obtain the smooth and uniform nanofibers without beads of both HCS/PVP/PVA and HCS-AgNPs/PVP/PVA systems. The presence of in-situ AgNPs in the multicomponent blends gives the better electrospinning performance and the lowest fiber diameter of 139 nm. In addition, the thermal properties, thermal stability and crystallinity index of both nanofibers also increased with increasing HCS or HCS-AgNPs fractions. Finally, the best antibacterial activity of HCS/PVP/PVA and HCS-AgNPs/PVP/PVA nanofibers against E. coli was found to be 74.4% and 99.9%, respectively. The significant enhancement in bactericidal activity of HCS-AgNPs/PVP/PVA nanofibers against E. coli is due to the synergistic properties of HCS/PVP/PVA blends and AgNPs. Both nanofiber mats displayed the excellent structural stability in moisture environment for at least 7 days. Therefore, the HCS-AgNPs/PVP/PVA nanofibers could be a potential material for applying in the medical purpose.

Recent nanobiotechnological advancements in lignocellulosic biomass valorization: A review

Increase in human population, rapid industrialization, excessive utilization of fossil fuel utilization and anthropogenic activities have caused serious threats to the environment in terms of greenhouse gas emissions (GHGs), global warming, air pollution, acid rain, etc. This destruction in sustainability can be averted by a paradigm shift in the fuel production from fossil resources to bioenergy. Amongst different forms of bioenergy, lignocellulosic biomass can be utilized as an attractive substrate for the production of several high-value products owing to its renewability, easy availability, and abundance. Additionally, utilization of these waste biomasses reduces the environmental hazards associated with its disposal. Impedance of lignin and crystalline nature of cellulose pose major bottlenecks in biomass based energy. Though, several physio-chemicals processes are recommended as mitigation route but none of them seems to be promising for large scale application. In recent years, a right fusion of biological treatment combined with nanotechnology for efficient pretreatment and subsequent hydrolysis of biomass by ubiquitous enzymes seems to be promising alternative. In addition, to overcome these difficulties, nanotechnology-based methods have been recently adopted in catalytic valorization of lignocellulosic biomass. The present review has critically discussed the application of nano-biotechnology in lignocellulosic biomass valorization in terms of pretreatment and hydrolysis. A detailed discussion on the application of various nanoparticles in these processes, enzyme immobilization and end-production utilization is presented in this review. Finally, the review emphasizes the major challenges of this process along with different routes and recommendations to address the issues.

Mono- and dinuclear zinc complexes bearing identical bis(thiosemicarbazone) ligand that exhibit alkaline phosphatase-like catalytic reactivity

Mono- and dinuclear zinc(II) complexes bearing bis(thiosemicarbazone) (bTSC) ligand were employed in the cleavage of phosphoester bonds. Comparative kinetic studies combined with theory suggested that the P-O bond cleavage is much accelerated by dinuclear zinc(II) complex in the presence of base. Based on the DFT-optimized structures of the proposed intermediates, it is plausible that (1) the removal of sulfur atoms of bTSC ligand from the zinc center provides two vacant sites for the binding of water (or hydroxide ion) and phosphoester and (2) the H-bonding between water (or hydroxide ion) and phosphoester, through several water molecules, may also assist the P-O bond cleavage and facilitate the nucleophilic attack. The kinetic and catalytic studies on the hydrolysis of phosphoester by dinuclear zinc complex showed a much-enhanced reactivity under basic reaction conditions, reaching over 95% conversion yield within 4 h. The currently presented compounds are arguably one of the faster synthetic Zn-based model performing phosphatase-like activity presented so far.

Triple-Element Compound-Specific Stable Isotope Analysis (3D-CSIA): Added Value of Cl Isotope Ratios to Assess Herbicide Degradation

Multielement isotope fractionation studies to assess pollutant transformation are well-established for point-source pollution but are only emerging for diffuse pollution by micropollutants like pesticides. Specifically, chlorine isotope fractionation is hardly explored but promising, because many pesticides contain only few chlorine atoms so that "undiluted" position-specific Cl isotope effects can be expected in compound-average data. This study explored combined Cl, N, and C isotope fractionation to sensitively detect biotic and abiotic transformation of the widespread herbicides and groundwater contaminants acetochlor, metolachlor, and atrazine. For chloroacetanilides, abiotic hydrolysis pathways studied under acidic, neutral, and alkaline conditions as well as biodegradation in two soils resulted in pronounced Cl isotope fractionation (ε_Cl from -5.0 ± 2.3 to -6.5 ± 0.7‰). The characteristic dual C-Cl isotope fractionation patterns (Λ_C-Cl from 0.39 ± 0.15 to 0.67 ± 0.08) reveal that Cl isotope analysis provides a robust indicator of chloroacetanilide degradation. For atrazine, distinct Λ_C-Cl values were observed for abiotic hydrolysis (7.4 ± 1.9) compared to previous reports for biotic hydrolysis and oxidative dealkylation (1.7 ± 0.9 and 0.6 ± 0.1, respectively). The 3D isotope approach allowed differentiating transformations that would not be distinguishable based on C and N isotope data alone. This first data set on Cl isotope fractionation in chloroacetanilides, together with new data in atrazine degradation, highlights the potential of using compound-specific chlorine isotope analysis for studying in situ pesticide degradation.

Histopathology of Hydrolyzed MIRAgel Scleral Buckles

Introduction

The goal of this study was to histopathologically evaluate the appearance of degrading MIRAgel scleral buckles so that they can be reliably distinguished by ophthalmic pathologists from other foreign materials.

Methods

Retrospective chart review and histopathologic study with special stains, including Alcian blue, periodic acid-Schiff, Masson's trichrome, and Perls' Prussian blue for iron, of 4 cases between 2017 and 2019.

Results

Hydrolyzed MIRAgel scleral buckles from 4 patients had a consistent histopathologic appearance. They had a honeycomb structure with the walls of the lattice ranging from distinct to poorly defined. The walls of the lattice were positive for Alcian blue, while the contents of each cell contained periodic acid-Schiff-positive material. Other special stains were not as valuable in highlighting the material.

Discussion

Although the capsules of MIRAgel scleral buckles have been well studied, the material itself has not been. While clinical history and radiographic appearance are often diagnostic of a hydrolyzed MIRAgel scleral buckle, there are instances of preoperative ambiguity where histopathologic confirmation can be useful.

Conclusions

MIRAgel scleral buckles have a distinct histopathologic appearance that can be readily distinguished from that of other foreign materials.

Enhancing hydrolysis and syntropy simultaneously in solid state anaerobic digestion: Digester performance and techno-economic evaluation

The present study investigated the effect of alkali and biochar addition for simultaneous increment of hydrolysis and syntropy for higher methane yield from pearl millet straw (PMS) in solid state anaerobic digestion. A taguchi based design of experiment was coupled with grey relation analysis for multiple output optimization. Study showed that 0.5 g (g/100 g PMS) of alkali and 10 g/L of biochar was the optimised dosing. Statistically, contribution of biochar and alkali was 48 and 21% respectively on the multiple output. The confirmation test revealed that hydrolysis rate constant, k and total volatile fatty acid/alkalinity ratio for reactor having optimised conditions was 0.0521 d^-1 and 0.36 while for control, it was 0.0595 d^-1 and 0.76 respectively. Techno-economic assessment showed US$ 25,652 of net present value and 11.29% of internal rate of return. Sensitivity analysis showed that capital expenditure and methane yield was most sensitive to net present value.

Heterotrophic cultivation of Galdieria sulphuraria under non-sterile conditions in digestate and hydrolyzed straw

Non-sterile heterotrophic cultivation of Galdieria sulphuraria in presence of digestate as well as straw after hydrolysis was investigated. G. sulphuraria can be grown in pure digestate at rates of 0.9 day^-1 with glucose. However, a proteolytic treatment of digestate resulted in increased growth rates (1.2 day^-1) and doubled cell concentrations. Furthermore, G. sulphuraria can utilize glucose obtained after straw hydrolysis. Biomass yields in glucose limited cultures were around 0.9 g per g glucose, while only 0.2 g biomass was formed per g glucose in glucose sufficient cultures. Biomass composition (w/w) of G. sulphuraria grown in digestate supplemented with straw hydrolysate consisted of 20% carbohydrates, 37% proteins and 3% lipids. This study revealed the potential to utilize agricultural waste streams to form algal biomass rich in proteins and may pave the way to novel utilization strategies to be implemented in rural areas.

Pectinase hydrolysis of guava pulp: effect on the physicochemical characteristics of its juice

The objective of this research is to assess the effect of enzymatic treatment of guava puree on the physicochemical parameters of the juice. Pectinases from Aspergillus niger were applied to the puree at 43 ± 3 °C under constant stirring. Enzyme concentrations used were: 0.033 % (w/w), 0.055% (w/w), 0.078 % (w/w) and 0.1 % (w/w). For each enzyme concentration, the treatment times were varied from 3 - 90 min. Physicochemical parameters of raw puree and enzymatically treated juice were determined. These were: viscosity, pH, electric conductivity, protein and polyphenol content, galacturonic acid content, color, TSS, and antioxidant capacity. Particle distribution, homogeneity of raw puree and juice samples dried extracts were assessed using a Field Emission Scanning Electron Microscopy (FESEM). A 91% viscosity decrease was recorded for each enzyme concentration after 3 min of enzyme reaction. That drecrase was accompanied by an increase in galacturonic acid content with increasing depectinization factors. Enzyme treatment of guava puree led to a decrease in pH, protein and polyphenol contents and an increase in conductivity and color. Analysis of FESEM images of guava samples bestowed a decrease in particle size, a scattering of particles in the medium, an increase in continuous phase proportion and an improvement of sample homogeneity with increasing values of processing parameters, due to the breaking-down of bigger particles and the solubilization during depectinization.

Metal-Induced Fatty Acid Particle Formation Resulting from Hydrolytic Polysorbate Degradation

The occurrence of visible particles over the shelf-life of biopharmaceuticals is considered a potential safety risk for parenteral administration. In many cases, particle formation resulted from the accumulation of fatty acids released by the enzymatic hydrolysis of the polysorbate surfactant by co-purified host cell proteins. However, particle formation can occur before the accumulated fatty acids exceed their expected solubility limit. This early onset of particle formation is driven by nucleation phenomena e.g. the presence of metal cations that promote the formation and growth of fatty acid particles. To further characterize and understand this phenomenon, we assessed the potential of different metal cations to induce fatty acid particle formation using a dynamic light scattering assay. We demonstrated that the presence of trace amounts of multivalent cations, in particular trivalent cations such as aluminum and iron, may act as nucleation seed in the process of particle formation. Finally, we developed a mitigation strategy for metal-induced fatty acid particles that deploys a chelator to reduce the risk of particle formation in biopharmaceutical formulations.

Biologia futura: medicinal plants-derived bioactive peptides in functional perspective-a review

Bioactive peptides (BPs) are 3-20 amino acid residues, with a molecular weight lower than 6 kDa; originated from the breakdown of proteins by endogenous and exogenous peptidases. While intact in protein these peptides do not exert any biological activity, but as they release from their parent protein, they exert various pharmacological activities such as antidiabetic, antihypertensive, anticancerous, anti-inflammatory, antimicrobial, antioxidant, and immunomodulatory. Such peptides exist in all living organism like plants, animals, marine organism and also present in food products derived from them. BPs obtained from dairy food products, cereals, vegetables have been gaining much more importance now-a-days, but little work has been done on bioactive peptides obtained from medicinal plants. Some of the medicinal plants such as Tinospora cordifolia Sterculia foetida, Benincasa hispida, Parkia speciosa, Linum usitatissimum, Salvia hispanica and Ziziphus jujube have been explored for bioactive peptides. Current review is aimed to provide a complete information of medicinal plants derived BPs along with the surge of new materials, new plants which will provide more solutions for handling some of the major human health problems of twenty-first century. This review will also be helpful to researchers in providing valuable information about the extraction, separation, characterization of BPs, their known peptide sequences and various pharmacological activities exerted by medicinal plants-derived bioactive peptides.

Homodinuclear copper(II) and zinc(II) complexes of a carboxylate-rich ligand as synthetic mimics of phosphoester hydrolase in aqueous solutions

The synthesis, characterization and catalytic activities of two homodinuclear Cu(II) and Zn(II) complexes of a carboxylate-rich ligand, N,N'-Bis[2-carboxybenzomethyl]-N,N' -Bis[carboxymethyl]-1,3-diaminopropan-2-ol (H₅ccdp) ligand towards the hydrolysis of (p-nitrophenyl phosphate) (PNPP) and bis(p-nitrophenyl) phosphate (BNPP) substrates in aqueous systems are described. Kinetic investigations were carried out using UV-Vis spectrophotometric techniques at 25 °C and 37 °C and different pH (7-10) conditions. The kinetic studies revealed that the turnover rate (k_cat) values among the PNPP hydrolysis systems, the highest and the lowest k_cat values were displayed by [Cu₂(ccdp)(μ-OAc)]^2- at 2.34 × 10^-6 s^-1 (pH 8 and 37 °C) and 2.13 × 10^-8 s^-1 (pH 8 and 25 °C), respectively. However, similar comparisons among the BNPP hydrolysis revealed that highest and the lowest k_cat values were displayed by [Zn₂(ccdp)(μ-OAc)]^2- at 4.64 × 10^-8 s^-1 (pH 9 and 37 °C) and 2.38 × 10^-9 (pH 9 and 25 °C). Significantly enough, the catalyst-substrate adduct species containing a metal bound PNPP and BNPP have been detected by ESI-MS techniques. Additionally, a PNPP-bound copper complex has been isolated and crystalized using single crystal X-ray diffraction technique. Based on the structural and activity information obtained in this study, reaction mechanisms for the hydrolysis of PNPP have been proposed.

Sugarcane bagasse: a biomass sufficiently applied for improving global energy, environment and economic sustainability

Sugarcane (Saccharum officinarum) bagasse (SCB) is a biomass of agricultural waste obtained from sugarcane processing that has been found in abundance globally. Due to its abundance in nature, researchers have been harnessing this biomass for numerous applications such as in energy and environmental sustainability. However, before it could be optimally utilised, it has to be pre-treated using available methods. Different pre-treatment methods were reviewed for SCB, both alkaline and alkali-acid process reveal efficient and successful approaches for obtaining higher glucose production from hydrolysis. Procedures for hydrolysis were evaluated, and results indicate that pre-treated SCB was susceptible to acid and enzymatic hydrolysis as > 80% glucose yield was obtained in both cases. The SCB could achieve a bio-ethanol (a biofuel) yield of > 0.2 g/g at optimal conditions and xylitol (a bio-product) yield at > 0.4 g/g in most cases. Thermochemical processing of SCB also gave excellent biofuel yields. The plethora of products obtained in this regard have been catalogued and elucidated extensively. As found in this study, the SCB could be used in diverse applications such as adsorbent, ion exchange resin, briquettes, ceramics, concrete, cement and polymer composites. Consequently, the SCB is a biomass with great potential to meet global energy demand and encourage environmental sustainability.

Characterization of a novel isoflavone glycoside-hydrolyzing β-glucosidase from mangrove soil metagenomic library

For the beneficial pharmacological properties of isoflavonoids and their related glycoconjugates, there is increasingly interest in their enzymatic conversion. In this study, a novel β-glucosidase gene isolated from metagenomic library of mangrove sediment was cloned and overexpressed in Escherichia coli BL21(DE3). The purified recombination β-glucosidase, designated as r-Bgl66, showed high catalytic activity for soy isoflavone glycosides. It converted soy isoflavone flour extract with the productivities of 0.87 mM/h for daidzein, 0.59 mM/h for genistein and 0.42 mM/h for glycitein. The kcat/Km values for daidzin, genistin and glycitin were 208.73, 222.37 and 288.07 mM-1 s-1, respectively. In addition, r-Bgl66 also exhibited the characteristic of glucose-tolerance, and the inhibition constant Ki was 471.4 mM. These properties make it a good candidate in the enzymatic hydrolysis of soy isoflavone glycosides. This study also highlights the utility of metagenomic approach in discovering novel β-glucosidase for soy isoflavone glycosides hydrolysis.

Mechanisms of instantaneous inactivation of SARS-CoV-2 by silicon nitride bioceramic

The hydrolytic processes occurring at the surface of silicon nitride (Si3N4) bioceramic have been indicated as a powerful pathway to instantaneous inactivation of SARS-CoV-2 virus. However, the virus inactivation mechanisms promoted by Si3N4 remain yet to be elucidated. In this study, we provide evidence of the instantaneous damage incurred on the SARS-CoV-2 virus upon contact with Si3N4. We also emphasize the safety characteristics of Si3N4 for mammalian cells. Contact between the virions and micrometric Si3N4 particles immediately targeted a variety of viral molecules by inducing post-translational oxidative modifications of S-containing amino acids, nitration of the tyrosine residue in the spike receptor binding domain, and oxidation of RNA purines to form formamidopyrimidine. This structural damage in turn led to a reshuffling of the protein secondary structure. These clear fingerprints of viral structure modifications were linked to inhibition of viral functionality and infectivity. This study validates the notion that Si3N4 bioceramic is a safe and effective antiviral compound; and a primary antiviral candidate to replace the toxic and allergenic compounds presently used in contact with the human body and in long-term environmental sanitation.

Synthesis and Dehydrogenation of Organic Salts of a Five-Membered B/N Anionic Chain, a Novel Ionic Liquid

We have synthesized the tetrabutylammonium ([Bu₄ N]⁺ ), tetraethylammonium ([Et₄ N]⁺ ), guanidinium ([C(NH₂ )₃ ]⁺ ), and methylguanidinium ([C(N₃ H₅ CH₃ )]⁺ ) salts of the [BH₃ (NH₂ BH₂ )₂ H]^- anion, a five-membered B/N anionic chain, in high yields by the metathesis reactions of Na[BH₃ (NH₂ BH₂ )₂ H] with the corresponding halides and characterized them by NMR (¹¹ B, ¹¹ B{¹ H}, ¹ H, ¹ H{¹¹ B}, ¹³ C), IR, elemental analysis, TGA-DSC, and TGA-MS. These complexes behave like ionic liquids (ILs), in which the melting point of the [Bu₄ N][BH₃ (NH₂ BH₂ )₂ H] is the lowest (-51 °C). The dehydrogenation of these ILs have been studied through the thermal decomposition and catalytic hydrolysis in aqueous solution using the noble or non-noble metals or their salts as catalysts, and the results indicate that these ILs of five-membered B/N anionic chain are promising hydrogen storage materials.

Aged landfill leachate enhances anaerobic digestion of waste activated sludge

Anaerobic digestion (AD) is considered as a sustainable pathway to recover energy from organic wastes, but the digestive efficiency for waste activated sludge (WAS) is not as expected due to the limitations in WAS hydrolysis. This study proposes an effective strategy to simultaneously treat WAS and landfill leachate, aiming to promote WAS hydrolysis and enhance organics converting to methane. The effects of landfill leachate on the four stages (i.e., solubilization, hydrolysis, acidogenesis, and methanogenesis) of AD of WAS, as well as the effect mechanisms were investigated. Results showed that adding appropriate amounts of landfill leachate could promote the steps of solubilization, hydrolysis and acidogenesis of WAS, but had no-effect on methanogenesis. The hydrolysis and acidogenesis efficiency in the leachate added digesters were 2.0%-8.4% and 35.2%-72.7% higher than the control digester. Mechanism studies indicated that humic acid (HA) contained in the leachate was conducive to the processes of both hydrolysis and acidogenesis, but detrimental to the methanogenesis. Effects of heavy metals (HMs) on AD of WAS was also dose-dependent. Digestive performance was inhibited by excessive HMs but promoted by moderate dosages. Humic acid and metal ions tend to interact to form complexes, and thus relieve their each inhibition effects. It is also found that the stability of sludge flocs was reduced by the leachate through reducing both apparent activation energy (AAE) and median particle size (MPS) of the sludge. Microbial community and diversity results revealed that the relative abundance of microbes responsible for hydrolysis and acidogenesis increased when landfill leachate was present. This research provides a more technically and economically feasible approach to co-treating and co-utilizing WAS and landfill leachate.

Towards the design of organosilicon compounds for environmental degradation by using structure biodegradability relationships

Organosilicon compounds have numerous applications in consumer products. After entering the environment most of them are resistant against microbial degradation and they persist in the environment. Accordingly, they are ubiquitously present in the environment. Therefore, better environmentally degradable organosilicon compounds are urgently needed. A systematic investigation of environmental degradability of organosilicon compounds allows to derive some general design principles, which in turn would enable chemists to reduce or better avoid environmental persistence of organosilicon compounds in the environment. Therefore, in this study, all organosilicon substances registered in the European Chemicals Agency (ECHA) database were evaluated for their environmental biodegradability. Results of own experiments with different organosilicon substances were added to extend the data basis. A dataset was generated. An assessment of all data was done and invalid data were excluded. The remaining 182 substances were grouped regarding their structure to derive general rules for the environmental biodegradability of organosilicon compounds. Non-biodegradable at all were for example cyclic, linear and branched siloxanes. Groups like ethers, esters, oximes, amines, and amides were prone to hydrolysis, which can result in readily biodegradable intermediates if they do not contain silicon functional groups anymore. This knowledge could be used for the design of better degradable organosilicon compounds as non-degradable substances should be avoided if they enter the environment after their usage.

Pomegranate peels waste hydrolyzate optimization by Response Surface Methodology for Bioethanol production

Unwanted agricultural waste is largely comprised of lignocellulosic substrate which could be transformed into sugars. The production of bioethanol from garbage manifested an agreeable proposal towards waste management as well as energy causation. The goal of this work is to optimize parameters for generation of bioethanol through fermentation by different yeast strains while Saccharomyces cerevisiae used as standard strain. The low cost fermentable sugars from pomegranate peels waste (PPW) were obtained by hydrolysis with HNO3 (1 to 5%). The optimum levels of hydrolysis time and temperature were elucidated via RSM (CCD) ranging from 30 to 60 min and 50 to 100 °C respectively. The result shows that optimum values (g/L) for reducing sugars was 61.45 ± 0.01 while for total carbohydrates was 236 ± 0.01. These values were found when PPW was hydrolyzed with 3% HNO3, at 75 °C for one hour. The hydrolyzates obtained from the dilute HNO3 pretreated PPW yielded a maximum of 0.43 ± 0.04, 0.41 ± 0.03 g ethanol per g of reducing sugars by both Metchnikowia sp. Y31 and M. cibodasensis Y34 at day 7 of ethanologenic experiment. The current study exhibited that by fermentation of dilute HNO3 hydrolyzates of PPW could develop copious amount of ethanol by optimized conditions.

Enzymatic Hydrolysis of Lignocellulosic Biomass Using an Optimized Enzymatic Cocktail Prepared from Secretomes of Filamentous Fungi Isolated from Amazonian Biodiversity

The use of lignocellulosic biomass (LCB) has emerged as one of the main strategies for generating renewable biofuels. For the efficient use of such feedstock, pre-treatments are essential. The hydrolysis of cellulose - major component of LCB - demands enzymatic cocktails with improved efficiency to generate fermentable sugars. In this scenario, lignocellulolytic fungi have enormous potential for the development of efficient enzyme platforms. In this study, two enzymatic cocktails were developed for hydrolysis of two lignocellulosic biomasses: industrial cellulose pulp and cassava peel. The solid biomass ratio in relation to the protein content of the enzyme cocktail was performed by experimental design. The optimized cocktail for the hydrolysis of cellulose pulp (AMZ 1) was composed, in protein base, by 43% of Aspergillus sp. LMI03 enzyme extract and 57% of T. reesei QM9414, while the optimal enzyme cocktail for cassava peel hydrolysis (AMZ 2) was composed by 50% of Aspergillus sp. LMI03 enzyme extract, 25% of the extract of P. citrinum LMI01 and 25% of T. reesei. The ratio between solids and protein loading for AMZ 1 cocktail performance was 52 g/L solids and 30 mg protein/g solids, resulting in a hydrolytic efficiency of 93%. For the AMZ 2 cocktail, the hydrolytic efficiency was 78% for an optimized ratio of 78 g/L solids and 19 mg protein/g solids. These results indicate that cocktails formulated with enzymatic extracts of P. citrinum LMI01, Aspergillus sp. LMI03, and T. reesei QM9414 are excellent alternatives for efficient hydrolysis of plant biomass and for other processes that depend on biocatalysis.

Characterization of Polysorbate 80 by Liquid Chromatography-Mass Spectrometry to Understand Its Susceptibility to Degradation and Its Oxidative Degradation Pathway

A liquid chromatography-mass spectrometry (LC-MS) method was developed to provide a fingerprint of polysorbate 80 (PS80) subspecies that enables identification of PS80 degradation pathway. The developed method demonstrates unique monoester peak profile of PS80 from different vendors, attributed by differences in relative abundance of the fatty acid monoesters. The LC-MS method was also applied to examine the susceptibility of PS80, at different grades, to auto-oxidation and hydrolysis. PS80 oxidative degradation induced by iron or occurred in open bottle without nitrogen overlay was found to follow the same pathway, but at a much faster rate in the former scenario. The oxidation preferentially occurs at the double bond of fatty acid chains, thus providing explanation on the faster degradation observed in PS80 at Chinese Pharmacopia (ChP) grade than at multi-compendial (MC) grade. In contrast, the difference in susceptibility of MC and ChP grade PS80 against esterase-induced hydrolysis in placebo was not pronounced. The method was also able to provide a fingerprint to identify both PS80 hydrolysis and oxidation in mAb drug product stability samples, but it required a solid phase extraction step to remove protein prior to the analysis.

Melt intercalation technique for synthesis of hetero-metallic@chitin bio-composite as recyclable catalyst for prothiofos hydrolysis

The compatibility of homo-metallic and hetero-metallic bio-composite was promisingly investigated as recyclable catalyst for prothiofos hydrolysis. Chitin as water insoluble biopolymer was functionalized as a template for generation of homo-metallic (Ag@chitin, Au@chitin and Pd@chitin) and hetero-metallic (Au@Ag@chitin, Pd@Ag@chitin and Pd@Au@Ag@chitin) composites, by using melt intercalation technique. Investigation of the compatibility of the synthesized homo-metallic and hetero-metallic bio-composites in hydrolysis of prothiofos was performed and affirmed via HPLC results. Immobilization of Pd in the composites showed perfection in the catalytic performance for prothiofos hydrolysis. Pd@Au@Ag@chitin exhibited the highest hydrolysis result of 99% for prothiofos was hydrolyzed within 150 min with rate constant (k₁) of 24.48 min^-1. After five recycles for Pd@Au@Ag@chitin, the hydrolysis of prothiofos was lowered from 346 mg/g to 269 mg/g with reduction percentage of 22%. The synthesized bio-composite was highly effective as recyclable catalyst and can be easily served in the remediation of pesticides.

Generation of microplastic particles during degradation of polycarbonate films in various aqueous media and their characterization

A 250-day batch experiment was conducted to examine the generation of microplastic particles from degradation of polycarbonate films in 3 aqueous media of environmental relevance. The microplastic particles generated from the experiment were characterized by SEM/EDS and micro-FTIR analysis. Hydrolysis was responsible for the cleavage of carbon-oxygen bonds in the carbonate group of polycarbonate backbone and detachment of micro-sized plastic particles from the PC film surfaces. The deionized water treatment had the highest concentration of total organic carbon and the greatest number of microplastic particles among the three treatments. Either elevated acidity or the presence of hydroxyl radical did not enhance the hydrolytic degradation of the PC films and generation of microplastic particles though hydroxyl radical caused oxidative degradation of polycarbonate by attacking the organic group but not the carbonate group. Bisphenol A was not detected in any of the treatments. The microplastic particles generated from the current experiment were highly irregular, which may have different physicochemical and toxic behaviours from the spheric synthetic ones that were frequently used in toxicity experiments.

Hydrolytic cleavage of nerve agent simulants by gold nanozymes

Although banned by the Chemical Weapons Convention, organophosphorus nerve agents are still available and have been used in regional wars, terroristic attacks or for other crtaiminal purposes. Their degradation is of primary importance for the severe toxicity of these compounds. Here we report that gold nanoparticles passivated with thiolated molecules bearing 1,3,7-triazacyclononane and 1,3,7,10-tetraazacyclododecane ligands efficiently hydrolyze nerve agents simulants p-nitrophenyl diphenyl phosphate and methylparaoxon as transition metal complexes at 25 °C and pH 8 with half-lives of the order of a few minutes. Mechanistically, these catalysts show an enzyme-like behavior, hence they constitute an example of nanozymes. The catalytic site appears to involve a single metal ion and its recognition of the substrates is driven mostly by hydrophobic interactions. The ease of preparation and the mild conditions at which they operate, make these nanozymes appealing catalysts for the detoxification after contamination with organophosphorus nerve agents, particularly those poorly soluble in water.

Enhanced enzymatic hydrolysis of cellulose by endoglucanase via expansin pretreatment and the addition of zinc ions

One of the major limitations of lignocellulose conversion is the relatively low efficiency of cellulases. Expansins can act as an accessory protein to loosen the rigid cellulose structure and promote cellulose hydrolysis. However, the synergistic action of expansin is not well understood. In this study, we employed quartz crystal microbalance with dissipation to real-time monitor the adsorption of Bacillus subtilis expansin (BsEXLX1) and endoglucanase I (Cel7B) and the hydrolysis of cellulose. The effects of pH, temperature, and zinc ions on the initial adsorption rate and adsorption capacity of BsEXLX1 were examined. When 36.5 mM of zinc ions was added, the irreversible adsorption ratio of BsEXLX1 further increased to 4.63 times the value in the absence of zinc ions, whereas the initial adsorption rate and the hydrolysis rate constants of Cel7B could reach 2.16 times and 2.05 times the values in the absence of zinc ions, respectively.

Hydrolysis of FTOH precursors, a simple method to account for some of the unknown PFAS

There is a growing concern over a suspected presense of unknown perfluoroaliphatic substances (PFAS) in consumer goods and in the environment. Such unknown substances, possibly with high molecular weight, might be precursors of hazardous or controlled known PFAS. Recent studies confirmed that total organic fluorine (TOF) content often can not be explained by the measured target PFAS. One of the suspected classes of such unknowns are polymers with fluorotelomer alcohol (FTOH) residues in a side chain. In this report we suggest hydrolysis of precursors, as a complementary method to account for the unknown PFAS. It was shown here that hydrolysis allows to preserve structural information on the perlfuorinated parts of the precursors, which can be an advantage for the purpose of accurate risk assessment or source identification. A convenient procedure for hydrolysis with 4% sodium hydroxide in water-methanol mixture (1:9) at 60 °C for 16 h was shown to convert model substances - FTOH acrylate, methacrylate and isobutyrate esters as well as FTOH phenylcarbamate to free FTOHs. Analysis of extracts of textile samples with preliminary hydrolysis and without it showed up to 1300-fold higher level of "hidden" FTOHs.

BdPUL12 depolymerizes β-mannan-like glycans into mannooligosaccharides and mannose, which serve as carbon sources for Bacteroides dorei and gut probiotics

Symbiotic bacteria, including members of the Bacteroides genus, are known to digest dietary fibers in the gastrointestinal tract. The metabolism of complex carbohydrates is restricted to a specified subset of species and is likely orchestrated by polysaccharide utilization loci (PULs) in these microorganisms. β-Mannans are plant cell wall polysaccharides that are commonly found in human nutrients. Here, we report the structural basis of a PUL cluster, BdPUL12, which controls β-mannan-like glycan catabolism in Bacteroides dorei. Detailed biochemical characterization and targeted gene disruption studies demonstrated that a key glycoside hydrolase, BdP12GH26, performs the initial attack on galactomannan or glucomannan likely via an endo-acting mode, generating mannooligosaccharides and mannose. Importantly, coculture assays showed that the B. dorei promoted the proliferation of Lactobacillus helveticus and Bifidobacterium adolescentis, likely by sharing mannooligosaccharides and mannose with these gut probiotics. Our findings provide new insights into carbohydrate metabolism in gut-inhabiting bacteria and lay a foundation for novel probiotic development.

[Malassezia spp.: interactions with topically applied lipids-a review : Malassezia and topically applied lipids]

Lipophilic Malassezia yeasts are an important part of the human resident skin flora, especially in seborrheic areas. Besides mutualistic interactions with the host they are also linked to diseases although the specific causes are not yet comprehensively understood. The amount of available lipids on the skin correlates with the Malassezia density and also with the occurrence of certain diseases like tinea versicolor. Here, the naturally produced lipids of the sebaceous glands play a role. Hardly studied thus far is the impact of topically applied lipids. Here, growth promotion as well as inhibition of Malassezia cells as well as the production of new metabolites through ester cleavage are possible. One example is the release of antimicrobial fatty acids from hydroxypropyl caprylate through the action of Malassezia lipases. This "self-kill" principle results in the reduction of the amount of Malassezia cells and can be applied as new therapy option for dandruff treatment. A better understanding of the interaction between topica and Malassezia would increase their skin tolerance and open new therapy options.

Optimization of biogas yield from lignocellulosic materials with different pretreatment methods: a review

Population increase and industrialization has resulted in high energy demand and consumptions, and presently, fossil fuels are the major source of staple energy, supplying 80% of the entire consumption. This has contributed immensely to the greenhouse gas emission and leading to global warming, and as a result of this, there is a tremendous urgency to investigate and improve fresh and renewable energy sources worldwide. One of such renewable energy sources is biogas that is generated by anaerobic fermentation that uses different wastes such as agricultural residues, animal manure, and other organic wastes. During anaerobic digestion, hydrolysis of substrates is regarded as the most crucial stage in the process of biogas generation. However, this process is not always efficient because of the domineering stableness of substrates to enzymatic or bacteria assaults, but substrates' pretreatment before biogas production will enhance biogas production. The principal objective of pretreatments is to ease the accessibility of the enzymes to the lignin, cellulose, and hemicellulose which leads to degradation of the substrates. Hence, the use of pretreatment for catalysis of lignocellulose substrates is beneficial for the production of cost-efficient and eco-friendly process. In this review, we discussed different pretreatment technologies of hydrolysis and their restrictions. The review has shown that different pretreatments have varying effects on lignin, cellulose, and hemicellulose degradation and biogas yield of different substrate and the choice of pretreatment technique will devolve on the intending final products of the process.