1
|
Ruan J, Liao C, Li P, Li X, Zuo Y. Synergistic preparation of a straw fiber/polylactic acid composite with high toughness and strength through interfacial compatibility enhancement and elastomer toughening. Int J Biol Macromol 2024; 275:133621. [PMID: 38960248 DOI: 10.1016/j.ijbiomac.2024.133621] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 03/04/2024] [Revised: 06/22/2024] [Accepted: 06/30/2024] [Indexed: 07/05/2024]
Abstract
Plant fiber-reinforced polylactic acid (PLA) composites are extensively utilized in eco-friendly packaging, sports equipment, and various other applications due to their environmental benefits and cost-effectiveness. However, PLA suffers from brittleness and poor toughness, which restricts its use in scenarios demanding high toughness. To expand the application range of plant fiber-reinforced PLA-based composites and enhance their poor toughness, this study employed a two-step process involving wheat straw fiber (WF) to improve the interfacial compatibility between WF and PLA. Additionally, four elastomeric materials-poly (butylene adipate-co-terephthalate) (PBAT), poly (butylene succinate) (PBS), polycaprolactone (PCL), and polyhydroxyalkanoate (PHA)-were incorporated to achieve a mutual reactive interface enhancement and elastomeric toughening. The results demonstrated that Fe3+/TsWF/PLA/PBS exhibited a tensile strength, elongation at break, and impact strength of 34.01 MPa, 14.23 %, and 16.2 kJ/m2, respectively. These values represented a 2.4 %, 86.7 %, and 119 % increase compared to the unmodified composites. Scanning electron microscopy analysis revealed no fiber exposure in the cross-section, indicating excellent interfacial compatibility. Furthermore, X-ray diffraction and differential scanning calorimetry tests confirmed improvements in the crystalline properties of the composites. This work introduces a novel approach for preparing fiber-reinforced PLA-based composites with exceptional toughness and strength.
Collapse
Affiliation(s)
- Jiuchang Ruan
- College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha, Hunan 410004, PR China
| | - Chenggang Liao
- College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha, Hunan 410004, PR China
| | - Ping Li
- College of Furniture and Art Design, Central South University of Forestry and Technology, Changsha, Hunan 410004, PR China
| | - Xingong Li
- College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha, Hunan 410004, PR China
| | - Yingfeng Zuo
- College of Materials Science and Engineering, Central South University of Forestry and Technology, Changsha, Hunan 410004, PR China.
| |
Collapse
|
2
|
Zhang Y, Wang W, Wang P, Lu Z, Yang Z. Microstructural Evolution and Failure in Fibrous Network Materials: Failure Mode Transition from the Competition between Bond and Fiber. MATERIALS (BASEL, SWITZERLAND) 2024; 17:2110. [PMID: 38730916 PMCID: PMC11084192 DOI: 10.3390/ma17092110] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 01/22/2024] [Revised: 03/23/2024] [Accepted: 03/26/2024] [Indexed: 05/13/2024]
Abstract
For the complex structure of fibrous network materials, it is a challenge to analyze the network strength and deformation mechanism. Here, we identify a failure mode transition within the network material comprising brittle fibers and bonds, which is related to the strength ratio of the bond to the fiber. A failure criterion for this type of fibrous network is proposed to quantitatively characterize this transition between bond damage and fiber damage. Additionally, tensile experiments on carbon and ceramic fibrous network materials were conducted, and the experimental results show that the failure modes of these network materials satisfy the theoretical prediction. The relationship between the failure mode, the relative density of network and strength of the components is established based on finite element analysis of the 3D network model. The failure mode transforms from bond damage to fiber damage as increasing of bond strength. According to the transition of the failure modes in the brittle fibrous network, it is possible to tailor the mechanical properties of fibrous network material by balancing the competition between bond and fiber properties, which is significant for optimizing material design and engineering applications.
Collapse
Affiliation(s)
- Yao Zhang
- Advanced Materials and Energy Center, China Academy of Aerospace Science and Innovation, Beijing 100088, China; (W.W.); (P.W.)
| | - Weihua Wang
- Advanced Materials and Energy Center, China Academy of Aerospace Science and Innovation, Beijing 100088, China; (W.W.); (P.W.)
| | - Pengfei Wang
- Advanced Materials and Energy Center, China Academy of Aerospace Science and Innovation, Beijing 100088, China; (W.W.); (P.W.)
| | - Zixing Lu
- Institute of Solid Mechanics, Beihang University (BUAA), Beijing 100083, China; (Z.L.); (Z.Y.)
| | - Zhenyu Yang
- Institute of Solid Mechanics, Beihang University (BUAA), Beijing 100083, China; (Z.L.); (Z.Y.)
- Aircraft & Propulsion Laboratory, Ningbo Institute of Technology (NIT), Beihang University (BUAA), Ningbo 315832, China
| |
Collapse
|
3
|
Kurańska M, Ptak M, Malewska E, Prociak A, Barczewski M, Dymek M, Fernandes FAO, de Sousa RA, Polaczek K, Studniarz K, Uram K. Cork Porous Biocomposites with Polyurethane Matrix Modified with Polyol Based on Used Cooking Oil. MATERIALS (BASEL, SWITZERLAND) 2023; 16:3032. [PMID: 37109868 PMCID: PMC10146137 DOI: 10.3390/ma16083032] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Figures] [Subscribe] [Scholar Register] [Received: 02/23/2023] [Revised: 03/27/2023] [Accepted: 03/31/2023] [Indexed: 06/19/2023]
Abstract
Renewable materials are materials that are replenished naturally and can be used again and again. These materials include things such as bamboo, cork, hemp, and recycled plastic. The use of renewable components helps to reduce the dependence on petrochemical resources and reduce waste. Adopting these materials in various industries such as construction, packaging, and textiles can lead to a more sustainable future and decrease the carbon footprint. The presented research describes new porous polyurethane biocomposites based on used cooking oil polyol (50 per hundred polyol-php) modified with cork (3, 6, 9, and 12 php). The research described here demonstrated that it is possible to replace some petrochemical raw materials with raw materials of renewable origin. This was achieved by replacing one of the petrochemical components used for the synthesis of the polyurethane matrix with a waste vegetable oil component. The modified foams were analyzed in terms of their apparent density, coefficient of thermal conductivity, compressive strength at 10% of deformation, brittleness, short-term water absorption, thermal stability, and water vapor permeability, while their morphology was examined using scanning electron microscopy and the content of closed cells. After the successful introduction of a bio-filler, it was found that the thermal insulation properties of the modified biomaterials were comparable to those of the reference material. It was concluded that it is possible to replace some petrochemical raw materials with raw materials of renewable origin.
Collapse
Affiliation(s)
- Maria Kurańska
- Department of Chemistry and Technology of Polymers, Cracow University of Technology, Warszawska 24, 31-155 Cracow, Poland; (M.K.); (A.P.); (K.P.); (K.S.); (K.U.)
| | - Mariusz Ptak
- Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Łukasiewicza 7/9, 50-371 Wrocław, Poland; (M.P.); (M.D.)
| | - Elżbieta Malewska
- Department of Chemistry and Technology of Polymers, Cracow University of Technology, Warszawska 24, 31-155 Cracow, Poland; (M.K.); (A.P.); (K.P.); (K.S.); (K.U.)
| | - Aleksander Prociak
- Department of Chemistry and Technology of Polymers, Cracow University of Technology, Warszawska 24, 31-155 Cracow, Poland; (M.K.); (A.P.); (K.P.); (K.S.); (K.U.)
| | - Mateusz Barczewski
- Institute of Materials Technology, Poznan University of Technology, Piotrowo 3, 61-138 Poznan, Poland;
| | - Mateusz Dymek
- Faculty of Mechanical Engineering, Wroclaw University of Science and Technology, Łukasiewicza 7/9, 50-371 Wrocław, Poland; (M.P.); (M.D.)
| | - Fábio A. O. Fernandes
- TEMA: Centre for Mechanical Technology and Automation, Department of Mechanical Engineering, University of Aveiro, 3810-193 Aveiro, Portugal; (F.A.O.F.); (R.A.d.S.)
- LASI—Intelligent Systems Associate Laboratory, 4800-058 Guimaraes, Portugal
| | - Ricardo Alves de Sousa
- TEMA: Centre for Mechanical Technology and Automation, Department of Mechanical Engineering, University of Aveiro, 3810-193 Aveiro, Portugal; (F.A.O.F.); (R.A.d.S.)
- LASI—Intelligent Systems Associate Laboratory, 4800-058 Guimaraes, Portugal
| | - Krzysztof Polaczek
- Department of Chemistry and Technology of Polymers, Cracow University of Technology, Warszawska 24, 31-155 Cracow, Poland; (M.K.); (A.P.); (K.P.); (K.S.); (K.U.)
| | - Karolina Studniarz
- Department of Chemistry and Technology of Polymers, Cracow University of Technology, Warszawska 24, 31-155 Cracow, Poland; (M.K.); (A.P.); (K.P.); (K.S.); (K.U.)
| | - Katarzyna Uram
- Department of Chemistry and Technology of Polymers, Cracow University of Technology, Warszawska 24, 31-155 Cracow, Poland; (M.K.); (A.P.); (K.P.); (K.S.); (K.U.)
| |
Collapse
|
4
|
TRANSFORMATION OF TPU ELASTOMERS INTO TPU FOAMS USING SUPERCRITICAL CO2. A NEW REPROCESSING APPROACH. J Supercrit Fluids 2022. [DOI: 10.1016/j.supflu.2022.105806] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/16/2022]
|
5
|
Potential of Using Natural and Synthetic Binder in Wood Composites. FORESTS 2022. [DOI: 10.3390/f13060844] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/10/2022]
Abstract
The physical and mechanical properties of particleboard bonded with different cooking percentages of seaweed (Kappaphycus alvarezii), with different percentages of starch and different percentages of adhesives, and wood plastic composite (WPC) from High-Density Polyethlene (HDPE) with Acacia mangium wood powder were determined in this study. Seaweed mixed with different percentages of sulfuric acid (30 %, 50 %, 70 %) and Sodium Hydroxide (70 %, 50 %, 30 %) were prepared as a binder for particleboard. For a starch-based binder, different percentages of starch (10 %, 15 %, 20 %) were prepared, before producing particleboard with different amounts of binder (20 %, 25 %, 30 %). As for WPC, wood powders were bonded with different percentages of HDPE content (70 %, 80 %, 90 %). Results indicated that WPC at 90 % HDPE shows the best performance in the water absorption (0.07 %) and thickness swelling test (2.54 %). Starch-based particleboard recorded the highest Modulus of Elasticity (MOE) value (1115.07 N/mm2 at 15 % starch with 30 % amount of binder), while WPC (90 % HDPE) and starch-based particleboard (10 % starch with 20 % amount of binder) both recorded the highest Modulus of Rupture (MOR) at the same value, which is 7.84 N/mm2. Starch-based particleboard has a better internal bond, which is 0.05 N/mm2. However, seaweed-based particleboard has a higher density value, which is 0.6 g/cm3.
Collapse
|
6
|
Nofar M, Utz J, Geis N, Altstädt V, Ruckdäschel H. Foam 3D Printing of Thermoplastics: A Symbiosis of Additive Manufacturing and Foaming Technology. ADVANCED SCIENCE (WEINHEIM, BADEN-WURTTEMBERG, GERMANY) 2022; 9:e2105701. [PMID: 35187843 PMCID: PMC9008799 DOI: 10.1002/advs.202105701] [Citation(s) in RCA: 14] [Impact Index Per Article: 7.0] [Reference Citation Analysis] [Abstract] [Key Words] [MESH Headings] [Grants] [Track Full Text] [Subscribe] [Scholar Register] [Received: 12/08/2021] [Revised: 01/24/2022] [Indexed: 05/11/2023]
Abstract
Due to their light-weight and cost-effectiveness, cellular thermoplastic foams are considered as important engineering materials. On the other hand, additive manufacturing or 3D printing is one of the emerging and fastest growing manufacturing technologies due to its advantages such as design freedom and tool-less production. Nowadays, 3D printing of polymer compounds is mostly limited to manufacturing of solid parts. In this context, a merged foaming and printing technology can introduce a great alternative for the currently used foam manufacturing technologies such as foam injection molding. This perspective review article tackles the attempts taken toward initiating this novel technology to simultaneously foam and print thermoplastics. After explaining the basics of polymer foaming and additive manufacturing, this article classifies different attempts that have been made toward generating foamed printed structures while highlighting their challenges. These attempts are clustered into 1) architected porous structures, 2) syntactic foaming, 3) post-foaming of printed parts, and eventually 4) printing of blowing agents saturated filaments. Among these, the latest approach is the most practical route although it has not been thoroughly studied yet. A filament free approach that can be introduced as a potential strategy to unlock the difficulties to produce printed foam structures is also proposed.
Collapse
Affiliation(s)
- Mohammadreza Nofar
- Sustainable and Green Plastics LaboratoryMetallurgical and Materials Engineering DepartmentFaculty of Chemical and Metallurgical EngineeringIstanbul Technical UniversityIstanbul34469Turkey
- Polymer Science and Technology ProgramIstanbul Technical UniversityMaslakIstanbul34469Turkey
| | - Julia Utz
- Department of Polymer EngineeringUniversity of BayreuthBayreuth95447Germany
| | - Nico Geis
- Department of Polymer EngineeringUniversity of BayreuthBayreuth95447Germany
| | - Volker Altstädt
- Department of Polymer EngineeringUniversity of BayreuthBayreuth95447Germany
- Bavarian Polymer Institute and Bayreuth Institute of Macromolecular ResearchUniversity of BayreuthBayreuth95447Germany
| | - Holger Ruckdäschel
- Department of Polymer EngineeringUniversity of BayreuthBayreuth95447Germany
- Bavarian Polymer Institute and Bayreuth Institute of Macromolecular ResearchUniversity of BayreuthBayreuth95447Germany
| |
Collapse
|
7
|
Long Chopped Glass Fiber Reinforced Low-Density Unsaturated Polyester Resin under Different Initiation. MATERIALS 2021; 14:ma14237307. [PMID: 34885469 PMCID: PMC8658567 DOI: 10.3390/ma14237307] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.3] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 10/29/2021] [Revised: 11/19/2021] [Accepted: 11/25/2021] [Indexed: 11/17/2022]
Abstract
Long chopped glass fiber reinforced low-density unsaturated polyester resin (LCGFR-LDUPR) composite materials with light weight and excellent mechanical properties were prepared. It was proved that long chopped glass fiber, which was in length of 15.0 mm and chopped from ER4800-T718 plied yarn, was suitable for the preparation of LCGFR-LDUPR composite samples. With the coexistence of 1.50 parts per hundred of resin (phr) of methyl ethyl ketone peroxide (MEKP-II) and 0.05 phr of cobalt naphthenate, optimal preparation parameters were obtained, which were 20.00 phr of long chopped glass fiber, 2.50 phr of NH4HCO3, at a curing temperature of 58.0 °C. The lowest dosage of activated radicals produced by MEKP-II and cobalt naphthenate enabled the lower curing exothermic enthalpy and the slowest crosslinking for unsaturated polyester resin to carry out, resulting in a higher curing degree of resin. It was conducive to the formation, diffusion, and distribution of bubbles in uniform size, and also to the constitution of ideal three-dimensional framework of long glass fibers in the cured sample, which resulted in the LCGFR-LDUPR composite sample presenting the apparent density (ρ) of 0.68 ± 0.02 g/cm3, the compression strength (P) of 35.36 ± 0.38 MPa, and the highest specific compressive strength (Ps) of 52.00 ± 0.74 MPa/g·cm3. The work carried out an ideal three-dimensional framework of long chopped glass fiber in the reinforcement to low-density unsaturated polyester resin composite samples. It also presented the proper initiator/accelerator system of the lower curing exothermic enthalpy and the slowest crosslinking for unsaturated polyester resin.
Collapse
|
8
|
Biodegradable Foaming Material of Poly(butylene adipate-co-terephthalate) (PBAT)/Poly(propylene carbonate) (PPC). CHINESE JOURNAL OF POLYMER SCIENCE 2021. [DOI: 10.1007/s10118-021-2644-6] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/25/2022]
|
9
|
Chen Z, Faysal A, Embabi M, Yu L, Park C, Lee P. A path to nano-cellular foams: Constrained cell nucleation and growth in micro-/nano-layered structures. POLYMER 2021. [DOI: 10.1016/j.polymer.2021.124272] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/26/2022]
|
10
|
High Mechanic Enhancement of Chopped Carbon Fiber Reinforced-Low-Density Unsaturated Polyester Resin Composite at Low Preparation Temperature with Facile Polymerization. MATERIALS 2021; 14:ma14154273. [PMID: 34361467 PMCID: PMC8348061 DOI: 10.3390/ma14154273] [Citation(s) in RCA: 3] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Subscribe] [Scholar Register] [Received: 06/09/2021] [Revised: 07/17/2021] [Accepted: 07/23/2021] [Indexed: 11/16/2022]
Abstract
Chopped carbon fiber-reinforced low-density unsaturated polyester resin (CCFR-LDUPR) composite materials with light weight and high mechanical properties were prepared at low temperature and under the synergistic action of methyl ethyl ketone peroxide (MEKP-II) and cobalt naphthenate. Optimal preparation conditions were obtained through an orthogonal experiment, which were preparation temperature at 58.0 °C, 2.00 parts per hundred of resin (phr) of NH4HCO3, 4.00 phr of chopped carbon fibers (CCFs) in a length of 6.0 mm, 1.25 phr of initiator and 0.08 phr of cobalt naphthenate. CCFR-LDUPR composite sample presented its optimal properties for which the density (ρ) was 0.58 ± 0.02 g·cm−3 and the specific compressive strength (Ps) was 53.56 ± 0.83 MPa·g−1·cm3, which is 38.9% higher than that of chopped glass fiber-reinforced low-density unsaturated polyester resin (CGFR-LDUPR) composite materials. Synergistic effects of initiator and accelerator accelerated the specific polymerization of resin in facile preparation at low temperature. Unique “dimples”, “plate microstructure” and “surface defect” fabricated the specific microstructure of the matrix of CCFR-LDUPR composite samples, which was different from that of cured unsaturated polyester resin (UPR) with “body defect” or that of CGFR-LDUPR with coexistence of “surface defect” and “body defect”.
Collapse
|
11
|
Kastner C, Steinbichler G, Kahlen S, Jerabek M, Lummerstorfer T. Nonlinear influences of process parameters on mechanical properties of physically foamed, fiber‐reinforced polypropylene parts. J Appl Polym Sci 2020. [DOI: 10.1002/app.49569] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- Clemens Kastner
- Institute of Polymer Injection Molding and Process Automation Johannes Kepler University Linz Linz Austria
- Competence Center CHASE GmbH Linz Austria
| | - Georg Steinbichler
- Institute of Polymer Injection Molding and Process Automation Johannes Kepler University Linz Linz Austria
| | | | | | | |
Collapse
|
12
|
Batı B, Küçük EB, Durmuş A, Nofar M. Microcellular foaming behavior of ether- and ester-based TPUs blown with supercritical CO2. JOURNAL OF POLYMER ENGINEERING 2020. [DOI: 10.1515/polyeng-2020-0014] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
Abstract
Abstract
The bead foaming behavior of ether- and an ester-based Tensor Processing Unit (TPU) resins were investigated in a lab-scale reactor using supercritical CO2 as the blowing agent. The samples were saturated at various saturation temperatures and the effects of hard segment crystallization during the saturation on the foaming behavior of the TPU samples were explored. The results revealed that the different HS crystallization tendencies and possible CO2 solubility differences in two TPU grades led to their different foaming behaviors. The ester-based TPU could be foamed within a wider saturation temperature range and revealed an easier cell growth and foam expansion while the ether-based TPU showed a more limited cell growth behavior and hence processing window. The effect of pre-annealing and hence the isothermally induced HS crystallization on the foaming behavior of the ether-based TPU and the influence of depressurization rate on the foaming behavior of ester-based TPU was also explored.
Collapse
Affiliation(s)
- Bige Batı
- Polymer Science and Technology Program, Institute of Science and Technology, Istanbul Technical University , Maslak , Istanbul , 34469 , Turkey
| | - Emine Büşra Küçük
- Polymer Science and Technology Program, Institute of Science and Technology, Istanbul Technical University , Maslak , Istanbul , 34469 , Turkey
| | - Ali Durmuş
- Department of Chemical Engineering, Faculty of Engineering , Istanbul University-Cerrahpasa , Avcılar , Istanbul , 34320 , Turkey
| | - Mohammadreza Nofar
- Polymer Science and Technology Program, Institute of Science and Technology, Istanbul Technical University , Maslak , Istanbul , 34469 , Turkey
- Metallurgical and Materials Engineering Department, Faculty of Chemical and Metallurgical Engineering , Istanbul Technical University , Maslak , Istanbul , 34469 , Turkey
| |
Collapse
|
13
|
Guo G. Density reduction behaviors and cell morphology in extrusion of LLDPE/wood fiber composites with physical and chemical blowing agents. J Appl Polym Sci 2020. [DOI: 10.1002/app.48829] [Citation(s) in RCA: 5] [Impact Index Per Article: 1.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Affiliation(s)
- Gangjian Guo
- Department of Industrial & Manufacturing Engineering & TechnologyBradley University Illinois 61625
| |
Collapse
|
14
|
Zhu J, Tan D, Li L, Zhang S, Chen Y. Formation of novel “coral reef-like” structures for polycarbonate microcellular foam via asphalt-based microporous organic polymers and supercritical CO2. Eur Polym J 2020. [DOI: 10.1016/j.eurpolymj.2020.109780] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/24/2022]
|
15
|
Tukur A, Pekdemir ME, Haruna H, Coşkun M. Magnetic nanoparticle bonding to PVC with the help of click reaction: characterization, thermal and electrical investigation. JOURNAL OF POLYMER RESEARCH 2020. [DOI: 10.1007/s10965-020-02111-7] [Citation(s) in RCA: 4] [Impact Index Per Article: 1.0] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 12/30/2022]
|
16
|
Abdul Azam FA, Rajendran Royan NR, Yuhana NY, Mohd Radzuan NA, Ahmad S, Sulong AB. Fabrication of Porous Recycled HDPE Biocomposites Foam: Effect of Rice Husk Filler Contents and Surface Treatments on the Mechanical Properties. Polymers (Basel) 2020; 12:polym12020475. [PMID: 32092992 PMCID: PMC7077617 DOI: 10.3390/polym12020475] [Citation(s) in RCA: 12] [Impact Index Per Article: 3.0] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Download PDF] [Figures] [Journal Information] [Subscribe] [Scholar Register] [Received: 01/20/2020] [Revised: 02/14/2020] [Accepted: 02/14/2020] [Indexed: 12/22/2022] Open
Abstract
In this study, a biodegradable, cheap and durable recycled high-density polyethylene (rHDPE) polymer reinforced with rice husk (RH) fibre was fabricated into a foam structure through several processes, including extrusion, internal mixing and hot pressing. The effect of filler loading on the properties of the foam and the influence of RH surface treatments on the filler–matrix adhesion and mechanical properties of the composite foam were investigated. The morphological examination shows that 50 wt.% filler content resulted in an effective dispersion of cells with the smallest cell size (58.3 µm) and the highest density (7.62 × 1011 sel/cm3). This small cell size benefits the mechanical properties. Results indicate that the tensile strength and the Young’s modulus of the alkali-treated RH/rHDPE composite foam are the highest amongst the treatments (10.83 MPa and 858 MPa, respectively), followed by UV/O3, which has shown considerable increments compared with the untreated composite. The flexural and impact tests also show the increment in strength for the composite foam after chemical treatment. Although the UV/O3 surface treatment has minor influence on the mechanical enhancement of the composite foam, this method may be a reliable surface treatment of the fibre-reinforced composite.
Collapse
Affiliation(s)
- Farah Atiqah Abdul Azam
- Department of Mechanical and Manufacturing, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor Darul Ehsan 43600, Malaysia; (F.A.A.A.); (N.R.R.R.); (N.Y.Y.); (N.A.M.R.)
| | - Nishata Royan Rajendran Royan
- Department of Mechanical and Manufacturing, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor Darul Ehsan 43600, Malaysia; (F.A.A.A.); (N.R.R.R.); (N.Y.Y.); (N.A.M.R.)
| | - Nor Yuliana Yuhana
- Department of Mechanical and Manufacturing, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor Darul Ehsan 43600, Malaysia; (F.A.A.A.); (N.R.R.R.); (N.Y.Y.); (N.A.M.R.)
| | - Nabilah Afiqah Mohd Radzuan
- Department of Mechanical and Manufacturing, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor Darul Ehsan 43600, Malaysia; (F.A.A.A.); (N.R.R.R.); (N.Y.Y.); (N.A.M.R.)
| | - Sahrim Ahmad
- School of Applied Physics, Faculty of Science and Technology, Universiti Kebangsaan Malaysia, Bangi, Selangor Darul Ehsan 43600, Malaysia;
| | - Abu Bakar Sulong
- Department of Mechanical and Manufacturing, Faculty of Engineering and Built Environment, Universiti Kebangsaan Malaysia, Bangi, Selangor Darul Ehsan 43600, Malaysia; (F.A.A.A.); (N.R.R.R.); (N.Y.Y.); (N.A.M.R.)
- Correspondence: ; Tel.: +60-3-89216678
| |
Collapse
|
17
|
|
18
|
Chen Y, Xia C, Liu T, Hu D, Xu Z, Zhao L. Application of a CO 2 Pressure Swing Saturation Strategy in PP Semi-Solid-State Batch Foaming: Evaluation of Foamability by Experiments and Numerical Simulations. Ind Eng Chem Res 2020. [DOI: 10.1021/acs.iecr.9b06269] [Citation(s) in RCA: 13] [Impact Index Per Article: 3.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
Affiliation(s)
- Yichong Chen
- Shanghai Key Laboratory of Multiphase Materials Chemical Engineering, East China University of Science and Technology, Shanghai 200237, P. R. China
| | - Chengzhi Xia
- Shanghai Key Laboratory of Multiphase Materials Chemical Engineering, East China University of Science and Technology, Shanghai 200237, P. R. China
| | - Tao Liu
- Shanghai Key Laboratory of Multiphase Materials Chemical Engineering, East China University of Science and Technology, Shanghai 200237, P. R. China
| | - Dongdong Hu
- Shanghai Key Laboratory of Multiphase Materials Chemical Engineering, East China University of Science and Technology, Shanghai 200237, P. R. China
| | - Zhimei Xu
- Shanghai Key Laboratory of Multiphase Materials Chemical Engineering, East China University of Science and Technology, Shanghai 200237, P. R. China
| | - Ling Zhao
- Shanghai Key Laboratory of Multiphase Materials Chemical Engineering, East China University of Science and Technology, Shanghai 200237, P. R. China
- College of Chemistry and Chemical Engineering, Xinjiang University, Urumqi 830046, P. R. China
| |
Collapse
|
19
|
Singh I, Gandhi A, Mohanty S, Nayak SK. Depressurization induced morphology control in solid-state microcellular batch foaming process. JOURNAL OF MACROMOLECULAR SCIENCE PART A-PURE AND APPLIED CHEMISTRY 2019. [DOI: 10.1080/10601325.2019.1704178] [Citation(s) in RCA: 2] [Impact Index Per Article: 0.4] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/25/2022]
Affiliation(s)
- Indrajeet Singh
- School for Advanced Research in polymers (SARP) - LARPM, Central Institute of Plastics Engineering & Technology, Bhubaneswar, Odisha, India
| | - Abhishek Gandhi
- School for Advanced Research in polymers (SARP) - LARPM, Central Institute of Plastics Engineering & Technology, Bhubaneswar, Odisha, India
| | - Smita Mohanty
- School for Advanced Research in polymers (SARP) - LARPM, Central Institute of Plastics Engineering & Technology, Bhubaneswar, Odisha, India
| | - S. K. Nayak
- School for Advanced Research in polymers (SARP) - LARPM, Central Institute of Plastics Engineering & Technology, Bhubaneswar, Odisha, India
| |
Collapse
|
20
|
Pouriman M, Dahresobh A, Moradipour M, Caparanga AR. Thermal and nondestructive analysis of high density polyethylene filled with milled salago fiber. J Appl Polym Sci 2019. [DOI: 10.1002/app.47873] [Citation(s) in RCA: 3] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/10/2022]
Affiliation(s)
- Mohammadhosein Pouriman
- Department of Mechanical Engineering, Centre for Advanced Composite MaterialsThe University of Auckland Auckland New Zealand
| | - Ali Dahresobh
- School of Chemical EngineeringIslamic Azad University Tehran North Branch No 159, 7th Boostan St., Pasdaran Avenue Tehran Iran
| | - Mahsa Moradipour
- Department of Chemical and Materials EngineeringUniversity of Kentucky Lexington Kentucky 40506
| | - Alvin R. Caparanga
- School of Chemical Engineering and ChemistryMapúa University Intramuros, Manila 1002 Philippines
| |
Collapse
|
21
|
Rokkonen T, Peltola H, Sandquist D. Foamability and viscosity behavior of extrusion foamed PLA–pulp fiber biocomposites. J Appl Polym Sci 2019. [DOI: 10.1002/app.48202] [Citation(s) in RCA: 8] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/08/2022]
Affiliation(s)
- Teijo Rokkonen
- Department of Biomass Processing and Products, VTT Technical Research Centre of Finland Ltd., Visiokatu, 4, P.O. Box 1300, FI‐33101 Tampere Finland
| | - Heidi Peltola
- Department of Biomass Processing and Products, VTT Technical Research Centre of Finland Ltd., Visiokatu, 4, P.O. Box 1300, FI‐33101 Tampere Finland
| | - David Sandquist
- Department of Biomass Processing and Products, VTT Technical Research Centre of Finland Ltd., Tietotie, 4E, P.O. Box 1000, FI‐02044 VTT, Espoo Finland
| |
Collapse
|
22
|
Structure-tunable thermoplastic polyurethane foams fabricated by supercritical carbon dioxide foaming and their compressive mechanical properties. J Supercrit Fluids 2019. [DOI: 10.1016/j.supflu.2019.04.004] [Citation(s) in RCA: 47] [Impact Index Per Article: 9.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/19/2022]
|
23
|
Banerjee D, Dutta A, Vimal KK, Kapur GS, Ghosh AK. Correlation of Micro- and Macrostructural Attributes with the Foamability of Modified Polypropylene Using Supercritical CO 2. Ind Eng Chem Res 2019. [DOI: 10.1021/acs.iecr.9b01258] [Citation(s) in RCA: 6] [Impact Index Per Article: 1.2] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/09/2023]
Affiliation(s)
- Debjyoti Banerjee
- Department of Materials Science and Engineering, Indian Institute of Technology Delhi, New Delhi 110016, India
| | - Anindya Dutta
- Department of Materials Science and Engineering, Indian Institute of Technology Delhi, New Delhi 110016, India
| | | | - Gurpreet Singh Kapur
- Petrochemical and Polymer Department, R&D Division, Indian Oil Corporation Ltd., Faridabad 121007, India
| | - Anup K. Ghosh
- Department of Materials Science and Engineering, Indian Institute of Technology Delhi, New Delhi 110016, India
| |
Collapse
|
24
|
Yeh SK, Yang SH, Han L, Liu HY, Liao YS, Chang YC. Foam extrusion of polypropylene–rice husk composites using CO2 as the blowing agent. J CELL PLAST 2019. [DOI: 10.1177/0021955x19839744] [Citation(s) in RCA: 7] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
Affiliation(s)
- Shu-Kai Yeh
- Department of Materials Science and Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan, ROC
| | - Ssu-Hsuan Yang
- Department of Materials Science and Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan, ROC
| | - Long Han
- Huntsman LLC, The Woodlands, TX, USA
| | - Hung-Yun Liu
- Department of Materials Science and Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan, ROC
| | - Yi-Syun Liao
- Department of Materials Science and Engineering, National Taiwan University of Science and Technology, Taipei, Taiwan, ROC
| | - Yi-Chun Chang
- Miniwiz Sustainable Energy Development Co., Ltd, Taipei, Taiwan, ROC
| |
Collapse
|
25
|
Affiliation(s)
- Ayesha Kausar
- School of natural sciences, National University of Sciences and Technology, Islamabad, Pakistan
| |
Collapse
|
26
|
Guo B, Wang X, Wang R, Ma Y. Mild-thermal fabrication and phase conformation of chopped glass fiber-reinforced low-density unsaturated polyester resin with NH4HCO3. IRANIAN POLYMER JOURNAL 2018. [DOI: 10.1007/s13726-018-0670-1] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 11/30/2022]
|
27
|
Pouriman M, Dahresobh A, Caparanga AR, Moradipour M, Mehrpooya M. Morphological and physicomechanical analysis of high-density polyethylene filled with Salago fiber. J Appl Polym Sci 2018. [DOI: 10.1002/app.46479] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Affiliation(s)
- Mohammadhosein Pouriman
- School of Chemical Engineering and Chemistry; Mapúa University; Intramuros Manila 1002 Philippines
| | - Ali Dahresobh
- School of Chemical Engineering; Islamic Azad University Tehran North Branch, No. 25, 10th Boostan Street, Pasdaran Avenue; Tehran Iran
| | - Alvin R. Caparanga
- School of Chemical Engineering and Chemistry; Mapúa University; Intramuros Manila 1002 Philippines
| | - Mahsa Moradipour
- Department of Chemical and Materials Engineering; University of Kentucky; Lexington Kentucky 40506
| | - Mehdi Mehrpooya
- Renewable Energies and Environment Department, Faculty of New Sciences and Technologies; University of Tehran; Tehran Iran
- Hydrogen and Fuel Cell Laboratory, Faculty of New Sciences and Technologies; University of Tehran; Tehran Iran
| |
Collapse
|
28
|
Hou J, Zhao G, Zhang L, Dong G, Wang G. Foaming Mechanism of Polypropylene in Gas-Assisted Microcellular Injection Molding. Ind Eng Chem Res 2018. [DOI: 10.1021/acs.iecr.7b05389] [Citation(s) in RCA: 10] [Impact Index Per Article: 1.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Affiliation(s)
- Junji Hou
- Key Laboratory for Liquid−Solid Structural Evolution and Processing of Materials (Ministry of Education), Shandong University, Jinan, Shandong 250061, PR China
| | - Guoqun Zhao
- Key Laboratory for Liquid−Solid Structural Evolution and Processing of Materials (Ministry of Education), Shandong University, Jinan, Shandong 250061, PR China
| | - Lei Zhang
- Key Laboratory for Liquid−Solid Structural Evolution and Processing of Materials (Ministry of Education), Shandong University, Jinan, Shandong 250061, PR China
| | - Guiwei Dong
- Key Laboratory for Liquid−Solid Structural Evolution and Processing of Materials (Ministry of Education), Shandong University, Jinan, Shandong 250061, PR China
| | - Guilong Wang
- Key Laboratory for Liquid−Solid Structural Evolution and Processing of Materials (Ministry of Education), Shandong University, Jinan, Shandong 250061, PR China
| |
Collapse
|
29
|
Zhang X, Ding W, Zhao N, Chen J, Park CB. Effects of Compressed CO2 and Cotton Fibers on the Crystallization and Foaming Behaviors of Polylactide. Ind Eng Chem Res 2018. [DOI: 10.1021/acs.iecr.7b04139] [Citation(s) in RCA: 27] [Impact Index Per Article: 4.5] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
Affiliation(s)
- Xiaoli Zhang
- School
of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450001, China
- Microcellular
Plastics Manufacturing Laboratory, Department of Mechanical and Industrial
Engineering, University of Toronto, Toronto, Ontario M5S 3G8, Canada
| | - Weidan Ding
- Microcellular
Plastics Manufacturing Laboratory, Department of Mechanical and Industrial
Engineering, University of Toronto, Toronto, Ontario M5S 3G8, Canada
| | - Na Zhao
- School
of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450001, China
- Microcellular
Plastics Manufacturing Laboratory, Department of Mechanical and Industrial
Engineering, University of Toronto, Toronto, Ontario M5S 3G8, Canada
| | - Jingbo Chen
- School
of Materials Science and Engineering, Zhengzhou University, Zhengzhou 450001, China
| | - Chul B. Park
- Microcellular
Plastics Manufacturing Laboratory, Department of Mechanical and Industrial
Engineering, University of Toronto, Toronto, Ontario M5S 3G8, Canada
| |
Collapse
|
30
|
Sodium bicarbonate/azodiisobutyronitrile synergistic effect on low-density unsaturated polyester resin fabrication. IRANIAN POLYMER JOURNAL 2018. [DOI: 10.1007/s13726-018-0601-1] [Citation(s) in RCA: 1] [Impact Index Per Article: 0.2] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/18/2022]
|
31
|
|
32
|
Shaayegan V, Wang C, Costa F, Han S, Park CB. Effect of the melt compressibility and the pressure drop rate on the cell-nucleation behavior in foam injection molding with mold opening. Eur Polym J 2017. [DOI: 10.1016/j.eurpolymj.2017.05.003] [Citation(s) in RCA: 34] [Impact Index Per Article: 4.9] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 12/01/2022]
|
33
|
Maksimkin A, Senatov F, Anisimova N, Kiselevskiy M, Zalepugin D, Chernyshova I, Tilkunova N, Kaloshkin S. Multilayer porous UHMWPE scaffolds for bone defects replacement. MATERIALS SCIENCE & ENGINEERING. C, MATERIALS FOR BIOLOGICAL APPLICATIONS 2017; 73:366-372. [DOI: 10.1016/j.msec.2016.12.104] [Citation(s) in RCA: 41] [Impact Index Per Article: 5.9] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Received: 11/02/2016] [Revised: 12/02/2016] [Accepted: 12/20/2016] [Indexed: 10/20/2022]
|
34
|
Wei L, Qi Y, Sun J, You F, Ma Y, Jiang T, Luo Z. Improving the foaming and mechanical properties of the in situ microfiber-reinforced polyethylene terephthalate/polypropylene composites through compatibilization. Polym Bull (Berl) 2017. [DOI: 10.1007/s00289-017-1939-9] [Citation(s) in RCA: 4] [Impact Index Per Article: 0.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
35
|
Study on morphology, thermal, mechanical and Cd(II) adsorption properties of PVC/α-MnO2-stearic acid nanocomposites: production and application. JOURNAL OF POLYMER RESEARCH 2016. [DOI: 10.1007/s10965-016-1154-7] [Citation(s) in RCA: 13] [Impact Index Per Article: 1.6] [Reference Citation Analysis] [Track Full Text] [Subscribe] [Scholar Register] [Indexed: 10/20/2022]
|
36
|
Effect of foam processing parameters on bubble nucleation and growth dynamics in high-pressure foam injection molding. Chem Eng Sci 2016. [DOI: 10.1016/j.ces.2016.07.040] [Citation(s) in RCA: 41] [Impact Index Per Article: 5.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/23/2022]
|
37
|
Alshrah M, Tran MP, Gong P, Naguib HE, Park CB. Development of high-porosity resorcinol formaldehyde aerogels with enhanced mechanical properties through improved particle necking under CO 2 supercritical conditions. J Colloid Interface Sci 2016; 485:65-74. [PMID: 27649092 DOI: 10.1016/j.jcis.2016.09.030] [Citation(s) in RCA: 20] [Impact Index Per Article: 2.5] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 07/18/2016] [Revised: 09/02/2016] [Accepted: 09/13/2016] [Indexed: 10/21/2022]
Abstract
A new high porosity resorcinol-formaldehyde (RF) aerogel with improved particle necking is presented in this work. This RF aerogel was developed under CO2 supercritical drying conditions without any structural shrinkage. The water content and the catalyst percentage were varied to modify the particles' nucleation and growth mechanisms and to control particle-particle connections. The nucleation mechanism solely dependent on the initial catalyst percentage; the number of nuclei increased with the catalyst percentage. However, the growth and connection of the particles dependent on both the water content and the catalyst percentage through their effect on the pH value. As the water content increased to have a larger void fraction, the pH value decreased. Consequently, the spherical growth of the particles became dominant and, thereby, the connection of the particles became more difficult. But as the catalyst percentage increased, the pH value increased, and the connection of the particles became facilitated with the formation of necks around the particles. As a result, the semi-fibril-like structure was developed with a high void fraction. A 30% increase in the structural elasticity and a very low thermal conductivity of 0.0249W/mK were obtained.
Collapse
Affiliation(s)
- Mohammed Alshrah
- Microcellular Plastic Manufacturing Laboratory, Department of Mechanical and Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, Ontario M5S 3G8, Canada
| | - Minh-Phuong Tran
- Microcellular Plastic Manufacturing Laboratory, Department of Mechanical and Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, Ontario M5S 3G8, Canada
| | - Pengjian Gong
- Microcellular Plastic Manufacturing Laboratory, Department of Mechanical and Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, Ontario M5S 3G8, Canada
| | - Hani E Naguib
- Smart and Adaptive Polymers & Composites Laboratory, Department of Mechanical and Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, Ontario M5S 3G8, Canada
| | - Chul B Park
- Microcellular Plastic Manufacturing Laboratory, Department of Mechanical and Industrial Engineering, University of Toronto, 5 King's College Road, Toronto, Ontario M5S 3G8, Canada.
| |
Collapse
|
38
|
Yang JN. Comparative Effects of mEOC on the Structures and Properties of PP/SGF and PP/EOC/SGF Composite Foams. INT POLYM PROC 2016. [DOI: 10.3139/217.3171] [Citation(s) in RCA: 0] [Impact Index Per Article: 0] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/20/2022]
Abstract
Abstract
To improve the impact toughness of short glass fiber (SGF) reinforced polypropylene (PP) composite foams, maleic anhydride grafted ethylene-α-octene copolymer (mEOC) was employed as impact modifier and interfacial compatibilizer. And for comparison, mEOC was also introduced into PP/EOC/SGF composite foams. Then, the foaming qualities, interfacial structures and mechanical properties of samples against varying mEOC contents were examined and compared in detail. Results showed that adequate mEOC significantly improved the foamabilities of the composites, while the optimized mass fraction was 8% for PP/SGF composite foams and 3% for PP/EOC/SGF system. Increased mEOC facilitated the higher impact toughness, which was increased by 77% for PP/SGF composite foams, whereas only 5% for PP/EOC/SGF foams. However, the flexural strengths were just improved slightly, while compressive strengths decreased monotonically with mEOC for the investigated composite foams.
Collapse
Affiliation(s)
- J.-N. Yang
- College of Materials Science and Engineering , Anhui University of Science and Technology, Huainan , PRC
| |
Collapse
|
39
|
Wang X, Wang W, Liu B, Du Z, Peng X. Complex cellular structure evolution of polystyrene/poly (ethylene terephthalate glycol-modified) foam using a two-step depressurization batch foaming process. J CELL PLAST 2016. [DOI: 10.1177/0021955x15584653] [Citation(s) in RCA: 12] [Impact Index Per Article: 1.5] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
In order to decrease the cell size and maintain very high volume expansion ratio simultaneously, a methodology for the preparation of complex cellular structure (CCS) in polystyrene/poly(ethylene terephthalate glycol-modified) (PS/PETG) blend using two-step depressurization pressure batch foaming process was proposed. First, the optimum foaming temperature for PS and PS/PETG blend, respectively, were confirmed by one-step depressurization foaming process. Then, the CCS in PS and PS/PETG blending foam were fabricated by two-step depressurization foaming process at the optimum foaming temperature. The rheological properties of PS and PS/PETG blend were tested by dynamic rotational rheometer. The dispersion morphologies and foam morphologies were observed by scanning electron microscope. The lowest densities of PS and PS/PETG blending foams were obtained at the temperature of 136℃. The interfaces between PS and PETG could act as nucleation sites for the cell nucleation, which were helpful to fabricate the CCS. The CCS could be controlled by tuning the degree of the first-step depressurization and the holding time. The results showed that the large cells could be beneficial to decrease the foam density and the presence of small cells was beneficial to increase the cell number.
Collapse
Affiliation(s)
- Xiangdong Wang
- School of Materials and Mechanical Engineering, Beijing Technology and Business University, Beijing, PR China
| | - Wenzhao Wang
- School of Materials and Mechanical Engineering, Beijing Technology and Business University, Beijing, PR China
- Beijing Research Center for Radiation Application, Beijing, PR China
| | - Bengang Liu
- School of Materials and Mechanical Engineering, Beijing Technology and Business University, Beijing, PR China
- Key Laboratory of Carbon Fiber and Functional Polymers, Ministry of Education, Beijing University of Chemical Technology, Beijing , PR China
| | - Zhongjie Du
- Key Laboratory of Carbon Fiber and Functional Polymers, Ministry of Education, Beijing University of Chemical Technology, Beijing , PR China
| | - Xiangfang Peng
- National Engineering Research Centre for New Polymer Formed Equipment, South China University of Technology, Guangzhou, PR China
| |
Collapse
|
40
|
Shaayegan V, Mark LH, Park CB, Wang G. Identification of cell-nucleation mechanism in foam injection molding with gas-counter pressure via mold visualization. AIChE J 2016. [DOI: 10.1002/aic.15433] [Citation(s) in RCA: 18] [Impact Index Per Article: 2.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/25/2023]
Affiliation(s)
- Vahid Shaayegan
- Microcellular Plastics Manufacturing Laboratory, Dept. of Mechanical and Industrial Engineering; University of Toronto; Toronto ON Canada M5S 3G8
| | - Lun Howe Mark
- Microcellular Plastics Manufacturing Laboratory, Dept. of Mechanical and Industrial Engineering; University of Toronto; Toronto ON Canada M5S 3G8
| | - Chul B. Park
- Microcellular Plastics Manufacturing Laboratory, Dept. of Mechanical and Industrial Engineering; University of Toronto; Toronto ON Canada M5S 3G8
| | - Guilong Wang
- Institute of Metal Forming and Mould/Die Technology, School of Materials Science and Engineering, Shandong University; Jinan Shandong 250061 China
| |
Collapse
|
41
|
Rizvi GM, Pop-Iliev R, Parky CB. A Novel System Design for Continuous Processing of Plastic/Wood-Fiber Composite Foams with Improved Cell Morphology. J CELL PLAST 2016. [DOI: 10.1177/0021955x02038005786] [Citation(s) in RCA: 33] [Impact Index Per Article: 4.1] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/17/2022]
Abstract
It is believed that the moisture that is inherently present in nondried wood-fibers adversely affects the cell morphology of plastic/wood-fiber composite foams processed in extrusion. Based on this hypothesis, achieving a continuous extrusion-based production of fine-celled plastic/wood-fiber composite foams witha desirable quality would be strongly conditioned by the efficiency of the system designed for uninterrupted wood-fiber moisture elimination. This paper presents an innovative approachin addressing this problem by implementing the well-known cascade devolatilizing system in a chemical blowing agent (CBA) based production of plastic/wood-fiber composite foams. It comprises a moisture-evaporation tandem extrusion system equipped witha vent at the interconnection of the two extruders to serve for purging the moisture in the atmosphere. In order to check the performance of the newly developed system, an experimental study has been carried out for comparing the cell morphology and the volume expansion ratios of the foams obtained by processing identically formulated foamable plastic/wood-fiber composite mixtures using simultaneously the cascade devolatilizing tandem extrusion system and a corresponding single extruder withno vent. The experimental results revealed that the foams produced by using the cascade devolatilizing tandem system exhibited significantly improved cell morphologies and surface quality.
Collapse
Affiliation(s)
- Ghaus M. Rizvi
- Microcellular Plastics Manufacturing Laboratory, Department of Mechanical & Industrial Engineering, University of Toronto, 5 King’s College Road, Toronto, Ontario, Canada M5S 3G8
| | - Remon Pop-Iliev
- Microcellular Plastics Manufacturing Laboratory, Department of Mechanical & Industrial Engineering, University of Toronto, 5 King’s College Road, Toronto, Ontario, Canada M5S 3G8
| | - Chul B. Parky
- Microcellular Plastics Manufacturing Laboratory, Department of Mechanical & Industrial Engineering, University of Toronto, 5 King’s College Road, Toronto, Ontario, Canada M5S 3G8
| |
Collapse
|
42
|
Bledzki AK, Faruk O. Microcellular Injection Molded Wood Fiber-PP Composites: Part II - Effect of Wood Fiber Length and Content on Cell Morphology and Physico-mechanical Properties. J CELL PLAST 2016. [DOI: 10.1177/0021955x06060946] [Citation(s) in RCA: 22] [Impact Index Per Article: 2.8] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
Abstract
Microcellular wood fiber reinforced PP composites, a new development using bio-fiber strengthened plastic, are prepared in an injection molding process. The microcellular composites with five different types of wood fibers (hard wood fiber, finer hard wood fiber, soft wood fiber, finer soft wood fiber, and long wood fiber) are examined. The influence of wood fiber content (30-60% by weight) on the microcellular properties is also investigated. Microcell morphology (cell size, shape, and distribution) is observed using optical light and scanning electron micrographs (SEMs). The wood fiber length, geometry, and content strongly affected the microcellular structures of wood-PP composites. Composites with finer wood fibers possess better microcellular structures, and at a constant chemical foaming content, the higher percentage of wood fiber results in composites with smaller microcells. Due to the finer microcellular structures, finer wood fibers also result in improved physico-mechanical properties.
Collapse
Affiliation(s)
- Andrzej K. Bledzki
- Institut für Werkstofftechnik, Kunststoff- und Recyclingtechnik, University of Kassel, Mönchebergstr. 3, D-34109 Kassel, Germany,
| | - Omar Faruk
- Institut für Werkstofftechnik, Kunststoff- und Recyclingtechnik, University of Kassel, Mönchebergstr. 3, D-34109 Kassel, Germany
| |
Collapse
|
43
|
Wang K, Pang Y, Wu F, Zhai W, Zheng W. Cell nucleation in dominating formation of bimodal cell structure in polypropylene/polystyrene blend foams prepared via continuous extrusion with supercritical CO2. J Supercrit Fluids 2016. [DOI: 10.1016/j.supflu.2015.12.012] [Citation(s) in RCA: 57] [Impact Index Per Article: 7.1] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/28/2022]
|
44
|
Saniei M, Tran MP, Bae SS, Boahom P, Gong P, Park CB. From micro/nano structured isotactic polypropylene to a multifunctional low-density nanoporous medium. RSC Adv 2016. [DOI: 10.1039/c6ra22607h] [Citation(s) in RCA: 11] [Impact Index Per Article: 1.4] [Reference Citation Analysis] [Abstract] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/21/2023] Open
Abstract
A homogeneous low-density nano-porous medium of isotactic polypropylene (iPP) with a low thermal conductivity was fabricated using supercritical carbon dioxide (scCO2).
Collapse
Affiliation(s)
- Mehdi Saniei
- Microcellular Plastics Manufacturing Laboratory
- Department of Mechanical and Industrial Engineering
- University of Toronto
- Toronto
- Canada M5S 3G8
| | - Minh-Phuong Tran
- Microcellular Plastics Manufacturing Laboratory
- Department of Mechanical and Industrial Engineering
- University of Toronto
- Toronto
- Canada M5S 3G8
| | - Seong-Soo Bae
- Microcellular Plastics Manufacturing Laboratory
- Department of Mechanical and Industrial Engineering
- University of Toronto
- Toronto
- Canada M5S 3G8
| | - Piyapong Boahom
- Microcellular Plastics Manufacturing Laboratory
- Department of Mechanical and Industrial Engineering
- University of Toronto
- Toronto
- Canada M5S 3G8
| | - Pengjian Gong
- Microcellular Plastics Manufacturing Laboratory
- Department of Mechanical and Industrial Engineering
- University of Toronto
- Toronto
- Canada M5S 3G8
| | - Chul B. Park
- Microcellular Plastics Manufacturing Laboratory
- Department of Mechanical and Industrial Engineering
- University of Toronto
- Toronto
- Canada M5S 3G8
| |
Collapse
|
45
|
Hu F, Lin N, Chang PR, Huang J. Reinforcement and nucleation of acetylated cellulose nanocrystals in foamed polyester composites. Carbohydr Polym 2015; 129:208-15. [PMID: 26050907 DOI: 10.1016/j.carbpol.2015.04.061] [Citation(s) in RCA: 47] [Impact Index Per Article: 5.2] [Reference Citation Analysis] [Abstract] [Key Words] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Received: 02/16/2015] [Revised: 04/28/2015] [Accepted: 04/30/2015] [Indexed: 11/28/2022]
Abstract
The biodegradable foamed nanocomposites were developed from the reinforcement of surface acetylated cellulose nanocrystals (ACNC) as bionanofillers and the poly(butylene succinate) (PBS) as polymeric matrix. The surface modification of high-efficiency acetylation on the cellulose nanocrystals converted the hydrophilic hydroxyl groups to hydrophobic acetyl groups, which improved the compatibility between rigid nanoparticles and polyester matrix through the similar ester groups of two components. With the introduction of 5 wt% ACNC, the specific flexural strength (σ/ρf) and the specific flexural modulus (E/ρf) of the foamed composites significantly increased by 75.7% and 57.2% in comparison with those of the neat PBS foamed material. Meanwhile, with the change of the ACNC concentrations, the cell size and cell density of the foamed composites can be regulated and achieved the high cell density of 1.95 × 10(5)cells/cm(3) bearing the small average cell size of 178.84 μm (5 wt% ACNC). The microstructure observation of the foamed composites indicated the moderate loading levels of rigid ACNC can serve as the reinforcing phase for the stress transfer and promote the crystallinity advancement of the foamed composites.
Collapse
Affiliation(s)
- Fei Hu
- School of Chemistry, Chemical Engineering and Life Science, Wuhan University of Technology, Luoshi Road 122, Wuhan, China
| | - Ning Lin
- School of Chemistry, Chemical Engineering and Life Science, Wuhan University of Technology, Luoshi Road 122, Wuhan, China; Université Grenoble Alpes, Laboratoire Génie des Procédés Papetiers (LGP2), F-38000 Saint Martin d'Hères Cedex, France
| | - Peter R Chang
- Bioproducts and Bioprocesses National Science Program, Agriculture and Agri-Food Canada, 107 Science Place, Saskatoon, SK S7N 0X2, Canada
| | - Jin Huang
- School of Chemistry, Chemical Engineering and Life Science, Wuhan University of Technology, Luoshi Road 122, Wuhan, China.
| |
Collapse
|
46
|
Lopez-Gil A, Saiz-Arroyo C, Tirado J, Rodriguez-Perez MA. Production of non-crosslinked thermoplastic foams with a controlled density and a wide range of cellular structures. J Appl Polym Sci 2015. [DOI: 10.1002/app.42324] [Citation(s) in RCA: 6] [Impact Index Per Article: 0.7] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/09/2022]
Affiliation(s)
- Alberto Lopez-Gil
- Cellular Materials Laboratory; (CellMat), Condensed Matter Physics Department, University of Valladolid, Science School; Paseo de Belén, 7 47011 Valladolid Spain
| | - Cristina Saiz-Arroyo
- CellMat Technologies S.L. Centro de Tecnologías y Transferencia Aplicadas (CTTA); Paseo de Belén, 9 A 47011 Valladolid Spain
| | - Josias Tirado
- Cellular Materials Laboratory; (CellMat), Condensed Matter Physics Department, University of Valladolid, Science School; Paseo de Belén, 7 47011 Valladolid Spain
| | - Miguel Angel Rodriguez-Perez
- Cellular Materials Laboratory; (CellMat), Condensed Matter Physics Department, University of Valladolid, Science School; Paseo de Belén, 7 47011 Valladolid Spain
| |
Collapse
|
47
|
Hasan M, Banerjee AN, Lee M. Enhanced thermo-optical performance and high BET surface area of graphene@PVC nanocomposite fibers prepared by simple facile deposition technique: N 2 adsorption study. J IND ENG CHEM 2015. [DOI: 10.1016/j.jiec.2014.04.019] [Citation(s) in RCA: 34] [Impact Index Per Article: 3.8] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/15/2022]
|
48
|
|
49
|
Keshtkar M, Nofar M, Park C, Carreau P. Extruded PLA/clay nanocomposite foams blown with supercritical CO2. POLYMER 2014. [DOI: 10.1016/j.polymer.2014.06.059] [Citation(s) in RCA: 136] [Impact Index Per Article: 13.6] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 11/29/2022]
|
50
|
Zhao N, Mark LH, Zhu C, Park CB, Li Q, Glenn R, Thompson TR. Foaming Poly(vinyl alcohol)/Microfibrillated Cellulose Composites with CO2 and Water as Co-blowing Agents. Ind Eng Chem Res 2014. [DOI: 10.1021/ie502018v] [Citation(s) in RCA: 53] [Impact Index Per Article: 5.3] [Reference Citation Analysis] [Track Full Text] [Journal Information] [Subscribe] [Scholar Register] [Indexed: 01/26/2023]
Affiliation(s)
- Na Zhao
- National
Engineering Research Center for Advanced Polymer Processing Technology, Zhengzhou University, Zhengzhou 450002, China
- Microcellular
Plastics Manufacturing Laboratory, Department of Mechanical and Industrial
Engineering, University of Toronto, Toronto, Ontario, Canada, M5S 3G8
| | - Lun Howe Mark
- Microcellular
Plastics Manufacturing Laboratory, Department of Mechanical and Industrial
Engineering, University of Toronto, Toronto, Ontario, Canada, M5S 3G8
| | - Changwei Zhu
- Microcellular
Plastics Manufacturing Laboratory, Department of Mechanical and Industrial
Engineering, University of Toronto, Toronto, Ontario, Canada, M5S 3G8
| | - Chul B. Park
- Microcellular
Plastics Manufacturing Laboratory, Department of Mechanical and Industrial
Engineering, University of Toronto, Toronto, Ontario, Canada, M5S 3G8
| | - Qian Li
- National
Engineering Research Center for Advanced Polymer Processing Technology, Zhengzhou University, Zhengzhou 450002, China
| | - Robert Glenn
- Beauty
Technology Division, Procter and Gamble Company, Mason, Ohio 45040, United States
| | - Todd Ryan Thompson
- Beauty
Technology Division, Procter and Gamble Company, Mason, Ohio 45040, United States
| |
Collapse
|