Highly sensitive biofunctionalized mesoporous electrospun TiO(2) nanofiber based interface for biosensing

Application of the Electrospinning Technique in Electrochemical Biosensors: An Overview

Electrospinning is a cost-effective and flexible technology for producing nanofibers with large specific surface areas, functionalized surfaces, and stable structures. In recent years, electrospun nanofibers have attracted more and more attention in electrochemical biosensors due to their excellent morphological and structural properties. This review outlines the principle of electrospinning technology. The strategies of producing nanofibers with different diameters, morphologies, and structures are discussed to understand the regulation rules of nanofiber morphology and structure. The application of electrospun nanofibers in electrochemical biosensors is reviewed in detail. In addition, we look towards the future prospects of electrospinning technology and the challenge of scale production.

Miniaturized Biosensors Based on Lanthanide-Doped Upconversion Polymeric Nanofibers

Electrospun nanofibers possess a large surface area and a three-dimensional porous network that makes them a perfect material for embedding functional nanoparticles for diverse applications. Herein, we report the trends in embedding upconversion nanoparticles (UCNPs) in polymeric nanofibers for making an advanced miniaturized (bio)analytical device. UCNPs have the benefits of several optical properties, like near-infrared excitation, anti-Stokes emission over a wide range from UV to NIR, narrow emission bands, an extended lifespan, and photostability. The luminescence of UCNPs can be regulated using different lanthanide elements and can be used for sensing and tracking physical processes in biological systems. We foresee that a UCNP-based nanofiber sensing platform will open opportunities in developing cost-effective, miniaturized, portable and user-friendly point-of-care sensing device for monitoring (bio)analytical processes. Major challenges in developing microfluidic (bio)analytical systems based on UCNPs@nanofibers have been reviewed and presented.

Fe-Ni dual-single atoms nanozyme with high peroxidase-like activity for sensitive colorimetric and fluorometric dual-mode detection of cholesterol

Cholesterol is widely existed in nerve myelin sheath and various membrane structures, whose abnormal level would deteriorate human cells or even cause diseases. Herein, Fe-Ni dual-single-atom nanozyme was efficiently incorporated into N-doped carbon nanosheets (FeNi DSAs/N-CSs) by a simple calcination method. Its nanozyme activity and catalytic mechanism were investigated in details. The FeNi DSAs/N-CSs nanozyme showed superior peroxidase-like property, which was applied for the dual-mode determination of hydrogen peroxide (H2O2) and cholesterol. The colorimetric/fluorometric assays of H2O2 displayed the linear ranges of 1-50 mM and 5-40 mM with low limits of detection of 0.45 mM and 3.33 mM, respectively. In parallel, there exhibited the linear ranges of 0.5-5.0 mM and 0.25-5.0 mM for the colorimetric/fluorometric analysis of cholesterol, coupled with the limits of detection down to 0.19 mM and 0.044 mM, respectively. This work provided a rapid, cost-effectiveness and simple colorimetric/fluorometric method for sensitive dual-mode detection of cholesterol in human serum samples.

Rapid production of silver nanofibers using a self-reducing solution

Silver nanofibers (Ag NFs) have gained considerable attention because of their high transmittance resulting from the size effect, excellent electrical conductivity, and mechanical properties. However, synthesizing high-quality Ag NFs remains a challenge. This paper reports a novel self-reducing solution that contains platinum nanoparticles for the rapid production of Ag NFs. The method involves generating the precursor NFs and heating them in air, which reduces silver nitrate to Ag NFs within a few minutes. The as-prepared solution is characterized by its simple preparation, cost-effectiveness, and broad applicability. Additionally, the use of high-pressure airflow to directly spin the solution and a complete self-reduction system that does not depend on external conditions broadens the application prospects of the as-developed solution. Furthermore, we provide insights into the self-reduction mechanism and guidance on the preparation of self-reducing solutions.

Advanced Metallized Nanofibers for Biomedical Applications

Nanofibers are long, wire-like materials with nanoscale diameters and specific length diameter ratios. Nanofibers have porous reticular networks with remarkably high specific surface areas and significant interconnectivity between pores, allowing for the chemical modification and loading of drugs. Metallized nanofibers are novel materials that enhance the performance of attributes of conventional nanofibers by combining metals with nanofibers through electrostatic spinning doping, chemical modification, and loading approaches. Due to their unique physical and chemical properties, metallized nanofibers are diverse, rapidly developed materials in the fields of physical chemistry, materials science, and battery preparation. To date, with improvement in advanced preparation techniques and biocompatibility levels for materials, metallized nanofiber applications are gradually expanding into the biomedical field due to their excellent thermal and electrical conductivities and unique metal properties. In this review, the applications of metallized nanofibers in biomedicine are summarized. It is suggested to prepare metallized multifunctional nanofibers for tissue engineering, drug delivery, tumor treatment, wound healing, and biosensing applications by taking safety and stability as the main material selection guidelines. Finally, the development of nanofibers for biomedical applications is summarized and discussed.

A Review on Electrospun Nanofiber Composites for an Efficient Electrochemical Sensor Applications

The present review article discusses the elementary concepts of the sensor mechanism and various types of materials used for sensor applications. The electrospinning method is the most comfortable method to prepare the device-like structure by means of forming from the fiber structure. Though there are various materials available for sensors, the important factor is to incorporate the functional group on the surface of the materials. The post-modification sanction enhances the efficiency of the sensor materials. This article also describes the various types of materials applied to chemical and biosensor applications. The chemical sensor parts include acetone, ethanol, ammonia, and CO2, H2O2, and NO2 molecules; meanwhile, the biosensor takes on glucose, uric acid, and cholesterol molecules. The above materials have to be sensed for a healthier lifestyle for humans and other living organisms. The prescribed review articles give a detailed report on the Electrospun materials for sensor applications.

Advancements in Nanofiber-Based Electrochemical Biosensors for Diagnostic Applications

Biosensors are analytical tools that can be used as simple, real-time, and effective devices in clinical diagnosis, food analysis, and environmental monitoring. Nanoscale functional materials possess unique properties such as a large surface-to-volume ratio, making them useful for biomedical diagnostic purposes. Nanoengineering has resulted in the increased use of nanoscale functional materials in biosensors. Various types of nanostructures i.e., 0D, 1D, 2D, and 3D, have been intensively employed to enhance biosensor selectivity, limit of detection, sensitivity, and speed of response time to display results. In particular, carbon nanotubes and nanofibers have been extensively employed in electrochemical biosensors, which have become an interdisciplinary frontier between material science and viral disease detection. This review provides an overview of the current research activities in nanofiber-based electrochemical biosensors for diagnostic purposes. The clinical applications of these nanobiosensors are also highlighted, along with a discussion of the future directions for these materials in diagnostics. The aim of this review is to stimulate a broader interest in developing nanofiber-based electrochemical biosensors and improving their applications in disease diagnosis. In this review, we summarize some of the most recent advances achieved in point of care (PoC) electrochemical biosensor applications, focusing on new materials and modifiers enabling biorecognition that have led to improved sensitivity, specificity, stability, and response time.

Electrochemical devices for cholesterol detection

Cholesterol can be considered as a biomarker of illnesses such as heart and coronary artery diseases or arteriosclerosis. Therefore, the fast determination of its concentration in blood is interesting as a means of achieving an early diagnosis of these unhealthy conditions. Electrochemical sensors and biosensors have become a potential tool for selective and sensitive detection of this biomolecule, combining the analytical advantages of electrochemical techniques with the selective recognition features of modified electrodes. This review covers the different approaches carried out in the development of electrochemical sensors for cholesterol, differentiating between enzymatic biosensors and non-enzymatic systems, highlighting lab-on-a-chip devices. A description of the different modification procedures of the working electrode has been included and the role of the different functional materials used has been discussed.

Advancements and Utilizations of Scaffolds in Tissue Engineering and Drug Delivery

The drug development process requires a thorough understanding of the scaffold and its three-dimensional structure. Scaffolding is a technique for tissue engineering and the formation of contemporary functioning tissues. Tissue engineering is sometimes referred to as regenerative medicine. They also ensure that drugs are delivered with precision. Information regarding scaffolding techniques, scaffolding kinds, and other relevant facts, such as 3D nanostructuring, are discussed in depth in this literature. They are specific and demonstrate localized action for a specific reason. Scaffold's acquisition nature and flexibility make it a new drug delivery technology with good availability and structural parameter management.

Biosensing chips for cancer diagnosis and treatment: a new wave towards clinical innovation

Recent technological advances in nanoscience and material designing have led to the development of point-of-care devices for biomolecule sensing and cancer diagnosis. In situ and portable sensing devices for bedside, diagnosis can effectively improve the patient’s clinical outcomes and reduce the mortality rate. Detection of exosomal RNAs by immuno-biochip with increased sensitivity and specificity to diagnose cancer has raised the understanding of the tumor microenvironment and many other technology-based biosensing devices hold great promise for clinical innovations to conquer the unbeatable fort of cancer metastasis. Electrochemical biosensors are the most sensitive category of biomolecule detection sensors with significantly low concentrations down to the atomic level. In this sense, this review addresses the recent advances in cancer detection and diagnosis by developing significant biological sensing devices that are believed to have better sensing potential than existing facilities.

Fabrication of High Surface Area Microporous ZnO from ZnO/Carbon Sacrificial Composite Monolith Template

Fabrication of porous materials from the standard sacrificial template method allows metal oxide nanostructures to be produced and have several applications in energy, filtration and constructing sensing devices. However, the low surface area of these nanostructures is a significant drawback for most applications. Here, we report the synthesis of ZnO/carbon composite monoliths in which carbon is used as a sacrificial template to produce zinc oxide (ZnO) porous nanostructures with a high specific surface area. The synthesized porous oxides of ZnO with a specific surface area of 78 m2/g are at least one order of magnitude higher than that of the ZnO nanotubes reported in the literature. The crucial point to achieving this remarkable result was the usage of a novel ZnO/carbon template where the carbon template was removed by simple heating in the air. As a high surface area porous nanostructured ZnO, these synthesized materials can be useful in various applications including catalysis, photocatalysis, separation, sensing, solar energy harvest and Zn-ion battery and as supercapacitors for energy storage.

Mesoporous TiO2-based architectures as promising sensing materials towards next-generation biosensing applications

In the past two decades, mesoporous TiO2 has emerged as a promising material for biosensing applications. In particular, mesoporous TiO2 materials with uniform, well-organized pores and high surface areas typically exhibit superior biosensing performance, which includes high sensitivity, broad linear response, low detection limit, good reproducibility, and high specificity. Therefore, the development of biosensors based on mesoporous TiO2 has significantly intensified in recent years. In this review, the expansion and advancement of mesoporous TiO2-based biosensors for glucose detection, hydrogen peroxide detection, alpha-fetoprotein detection, immobilization of enzymes, proteins, and bacteria, cholesterol detection, pancreatic cancer detection, detection of DNA damage, kanamycin detection, hypoxanthine detection, and dichlorvos detection are summarized. Finally, the future perspective and research outlook on the utilization of mesoporous TiO2-based biosensors for the practical diagnosis of diseases and detection of hazardous substances are also given.

Pivotal role of electrospun nanofibers in microfluidic diagnostic systems - a review

Recently, the usage of electrospinning technology for the fabrication of fine fibers with a good deal of variation in morphology and structure has drawn the attention of many researchers around the world. These fibers have found their way in the many fields of science including medical diagnosis, tissue engineering, drug delivery, replica molding, solar cells, catalysts, energy conversion and storage, physical and chemical sensors and other applications. Among all applications, biosensing with the aim of rapid and sensitive biomarker detection is an area that warrants attention. Electrospun nanofibrous membranes enjoy numerous factors which benefit them to be used as potential candidates in biosensing platforms. Some of these factors include a high surface to volume ratio, analogous scale compared to bioactive molecules and relatively defect-free properties of nanofibers (NFs). In this review, we focused on the recent advances in electrospun nanofibrous membrane-based micro-analytical devices with an application as diagnostic systems. Hence, a study on the electrospun nanofiber usage in lab-on-a-chip and paper-based point-of-care devices, with an opening introduction to biosensors, nanofibers, the electrospinning method, and microfluidics as the principles of the intended subject, is provided. It is anticipated that the given examples in this paper will provide sufficient evidence for the potential of electrospun NFs for being used as a substrate in the commercial fabrication of highly sensitive and selective biosensors.

Extraction of Small RNAs by Titanium Dioxide Nanofibers

MicroRNAs (miRNAs) are small RNAs, that bind to mRNA targets and regulate their translation. Functional study of miRNAs and exploration of their utility as disease markers require miRNA extraction from biological samples, which contain large amounts of interfering compounds for downstream RNA identification and quantification. The most common extraction methods employ either silica columns or TRIzol reagent, but these approaches afford low recovery for small RNAs, possibly due to their short strand lengths. Here, we describe the fabrication of titanium dioxide nanofibers and the optimal extraction conditions to improve miRNA recovery from biological buffers, cell lysate, and serum.

Encapsulation of Phase-Changing Eutectic Salts in Magnesium Oxide Fibers for High-Temperature Carbon Dioxide Capture: Beyond the Capacity-Stability Tradeoff

Eutectic mixture (EM)-promoted MgO sorbents exhibit high CO₂ sorption capacities but  experience a significant decrease in uptake after multiple sorption-regeneration cycles due to EM movement and redistribution at high temperatures. Encapsulation of a pseudoliquid, phase-changing EM promoter with MgO may thus prevent the loss of active interface by confining the EM within a fixed area inside a MgO shell. In this work, we successfully embedded an EM composed of KNO₃ and LiNO₃ in a MgO fiber matrix via core-shell electrospinning. The synthesized sorbent achieved relatively high and steady sorption capacities, maintaining a stable uptake of ∼20 wt % after 25 sorption-regeneration cycles. The sorbent was also characterized using various techniques including in situ transmission electron microscopy (TEM) to describe its morphology, from which it was confirmed that the eutectic salt existed in distributed hollow pockets within the MgO fiber matrix and stayed confined within these fixed areas, favorably limiting its movement and redistribution when exposed to high temperatures where it exists in the liquid form. The EM may also be described as a glue that holds the fiber together, while MgO acts as a protective shell that prevents structural changes and rearrangement caused by EM movement, allowing the sorbent to retain its cyclic stability after multiple cycles and demonstrating its potential for industrial use after further improvement. Thus, the microencapsulation of a phase-changing EM material with pure MgO metal oxide was successfully achieved and might be explored for various material applications.

Electrospun Nanofibers for Drug Delivery and Biosensing

Early diagnosis and efficient treatment are of paramount importance to fighting cancers. Monitoring the foreign body response of a patient to treatment therapies also plays an important role in improving the care that cancer patients receive by their medical practitioners. As such, there is extensive research being conducted into ultrasensitive point-of-care detection systems and "smart" personalized anticancer drug delivery systems. Electrospun nanofibers have emerged as promising materials for the construction of nanoscale biosensors and therapeutic platforms because of their large surface areas, controllable surface conformation, good surface modification, complex pore structure, and high biocompatibility. Electrospun nanofibers are produced by electrospinning, which is a very powerful and economically viable method of synthesizing versatile and scalable assemblies from a wide array of raw materials. This review describes the theory of electrospinning, achievements, and problems currently faced in producing effective biosensors/drug delivery systems, in particular, for cancer diagnosis and treatment. Finally, insights into future prospects are discussed.

Fabrication Strategies of Scaffolds for Delivering Active Ingredients for Tissue Engineering

Designing scaffolds with optimum properties is an essential factor for tissue engineering success. They can be seeded with isolated cells or loaded with drugs to stimulate the body ability to repair or regenerate the injured tissues by acting as centers for new tissue formation. Recently, scaffolds gained a significant interest as principal candidates for tissue engineering due to overcoming the autograft or allograft's associated problems. The advancement of the tissue engineering field relies mainly on the introduction of new biomaterials for scaffolds' fabrication. This review presents and criticizes different scaffolds' fabrication techniques with particular emphasis on the fibrous, injectable in situ forming, foam, 3D freeze-dried, 3D printed, and 4D scaffolds. This article highlights on scaffolds' composition which would be beneficial for developing scaffolds that could potentially help to meet the demand for both drug delivery and tissue regeneration.

Recent advances in designing nanomaterial based biointerfaces for electrochemical biosensing cardiovascular biomarkers

Early diagnosis of cardiovascular disease (CVD) is critically important for successful treatment and recovery of patients. At present, detection of CVD at early stages of its progression becomes a major issue for world health. The nanoscale electrochemical biosensors exhibit diverse outstanding properties, rendering them extremely suitable for the determination of CVD biomarkers at very low concentrations in biological fluids. The unique advantages offered by electrochemical biosensors in terms of sensitivity and stability imparted by nanostructuring the electrode surface together with high affinity and selectivity of bioreceptors have led to the development of new electrochemical biosensing strategies that have introduced as interesting alternatives to conventional methodologies for clinical diagnostics of CVD. This review provides an updated overview of selected examples during the period 2005-2018 involving electrochemical biosensing approaches and signal amplification strategies based on nanomaterials, which have been applied for determination of CVD biomarkers. The studied CVD biomarkers include AXL receptor tyrosine kinase, apolipoproteins, cholesterol, C-reactive protein (CRP), D-dimer, fibrinogen (Fib), glucose, insulin, interleukins, lipoproteins, myoglobin, N-terminal pro-B-type natriuretic peptide (BNP), tumor necrosis factor alpha (TNF-α) and troponins (Tns) on electrochemical transduction format. Identification of new specific CVD biomarkers, multiplex bioassay for the simultaneous determination of biomarkers, emergence of microfluidic biosensors, real-time analysis of biomarkers and point of care validation with high sensitivity and selectivity are the major challenges for future research.

Integrated dual-modality microfluidic sensor for biomarker detection using lithographic plasmonic crystal

This paper reports an integrated dual-modality microfluidic sensor chip, consisting of a patterned periodic array of nanoposts coated with gold (Au) and graphene oxide (GO), to detect target biomarker molecules in a limited sample volume. The device generates both electrochemical and surface plasmon resonance (SPR) signals from a single sensing area of Au-GO nanoposts. The Au-GO nanoposts are functionalized with specific receptor molecules, serving as a spatially well-defined nanostructured working electrode for electrochemical sensing, as well as a nanostructured plasmonic crystal for SPR-based sensing via the excitation of surface plasmon polaritons. High sensitivity of the electrochemical measurement originates from the presence of the nanoposts on the surface of the working electrode where radial diffusion of redox species occurs. Complementarily, the SPR detection allows convenient tracking of dynamic antigen-antibody interactions, to describe the association and dissociation phases occurring at the sensor surface. The soft-lithographically formed nanoposts provide high reproducibility of the sensor response to epidermal growth factor receptor (ErbB2) molecules even at a femtomolar level. Sensitivities of the electrochemical measurements to ErbB2 are found to be 20.47 μA μM^-1 cm^-2 in a range from 1 fM to 0.1 μM, and those of the SPR measurements to be 1.35 nm μM^-1 in a range from 10 pM to 1 nM, and 0.80 nm μM^-1 in a range from 1 nM to 0.1 μM. The integrated dual-modality sensor offers higher sensitivity (through higher surface area and diffusions from nanoposts for electrochemical measurements), as well as the dynamic measurements of antigen-antibody bindings (through the SPR measurement), while operating simultaneously in a same sensing area using the same sample volume.

Preparation of multi-layer nylon-6 nanofibrous membranes by electrospinning and hot pressing methods for dye filtration

We report the formation of multi-layer nylon-6 (PA-6) nanofibrous membranes by electrostatic spinning coupled with a hot pressing process. The structure and porosity of multi-layer PA-6 nanofibrous membranes were characterized using a scanning electron microscope and the N₂ nitrogen adsorption and desorption isotherms. We show that multi-layer PA-6 nanofibrous membranes can be used for efficient and continuous indigo dye filtration. Under the condition of constant pressure at the 0.1 MPa dead end filtration, continuous filter for a period of time, the filtration efficiency for indigo dye increases with the increase of the number of layers in PA-6 nanofibrous membranes. The 10 layer PA-6 nanofiber membrane can completely remove the indigo dye, and early filtration flux was high, with extended time, the filtration flux decline and gradually stabilized.

The formation of multi-layer nylon-6 (PA-6) nanofibrous membranes by electrostatic spinning coupled with a hot pressing process, and they can be used for efficient and continuous indigo dye filtration.

Review of Water-Assisted Crystallization for TiO2 Nanotubes

TiO₂ nanotubes (TNTs) have drawn tremendous attention owing to their unique architectural and physical properties. Anodizing of titanium foil has proven to be the most efficient method to fabricate well-aligned TNTs, which, however, usually produces amorphous TNTs and needs further thermal annealing. Recently, a water-assisted crystallization strategy has been proposed and investigated by both science and engineering communities. This method is very efficient and energy saving, and it circumvents the drawbacks of thermal sintering approach. In this paper, we review the recent research progress in this kind of low-temperature crystallization approach. Here, various synthetic methods are summarized, and the mechanisms of the amorphous-crystalline transformation are analyzed. The fundamental properties and applications of the low-temperature products are also discussed. Furthermore, it is proved that the water-assisted crystallization approach is not only applicable to TNTs but also to crystallizing other metal oxides.

Fabrication and Characterization of New Composite Tio2 Carbon Nanofiber Anodic Catalyst Support for Direct Methanol Fuel Cell via Electrospinning Method

Platinum (Pt) is the common catalyst used in a direct methanol fuel cell (DMFC). However, Pt can lead towards catalyst poisoning by carbonaceous species, thus reduces the performance of DMFC. Thus, this study focuses on the fabrication of a new composite TiO2 carbon nanofiber anodic catalyst support for direct methanol fuel cells (DMFCs) via electrospinning technique. The distance between the tip and the collector (DTC) and the flow rate were examined as influencing parameters in the electrospinning technique. To ensure that the best catalytic material is fabricated, the nanofiber underwent several characterizations and electrochemical tests, including FTIR, XRD, FESEM, TEM, and cyclic voltammetry. The results show that D18, fabricated with a flow rate of 0.1 mLhr-1 and DTC of 18 cm, is an ultrafine nanofiber with the smallest average diameter, 136.73 ± 39.56 nm. It presented the highest catalyst activity and electrochemical active surface area value as 274.72 mAmg-1 and 226.75m2 g-1PtRu, respectively, compared with the other samples.

Nonlithographic Fabrication of Plastic-Based Nanofibers Integrated Microfluidic Biochip for Sensitive Detection of Infectious Biomarker

We report fabrication of a fully integrated plastic based microfluidic biochip for biosensing application. The microfluidic channels were fabricated by tune transfer method and integrated with the prefunctionalized sensing platform. This approach to assembling microchannels into prefunctionalized sensing substrate facilitates controlled functionalization and prevents damages on the functionalized surface. The sensing platform comprised a three-electrode system, in which the sensing electrode was integrated with antibody immobilized carbon nanotubes-zinc oxide (C-ZnO) nanofibers. Electrospinning technique was used to synthesize C-ZnO nanofibers and the surface of the nanofibers was covalently conjugated with histidine rich protein II antibodies (AntiHRP II) toward detection of infectious malarial specific antigen, namely histidine-rich protein II (HRP II). The analytical performance of the fabricated biochip was evaluated by differential pulse voltammetry method. The device exhibited a high sensitivity of 1.19 mA/((g mL^-1)/cm²) over a wide detection range (10 fg/mL to 100 μg/mL) with a low detection limit of 7.5 fg/mL toward HRP II detection. This fully integrated biochip offers a promising cost-effective approach for detection of several other infectious disease biomarkers.

Extraction of microRNAs from biological matrices with titanium dioxide nanofibers

MicroRNAs (miRNAs) are small RNAs that bind to mRNA targets and regulate their translation. A functional study of miRNAs and exploration of their utility as disease markers require miRNA extraction from biological samples, which contain large amounts of interfering compounds for downstream RNA identification and quantification. The most common extraction methods employ silica columns or the TRIzol reagent but give out low recovery for small RNAs probably due to their short strand lengths. Herein, we fabricated the titanium dioxide nanofibers using electrospinning to facilitate miRNA extraction and developed the optimal buffer conditions to improve miRNA recovery from biological matrices of cell lysate and serum. We found that our TiO₂ fibers could obtain a recovery of 18.0 ± 3.6% for miRNA fibers while carrying out the extraction in the more complex medium of cell lysate, much higher than the 0.02 ± 0.0001% recovery from the commercial kit. The much improved extraction of miRNAs from our fibers could be originated from the strong coordination between TiO₂ and RNA's phosphate backbone. In addition, the binding, washing, and elution buffers judiciously developed in the present study can achieve selective extraction of small RNA shorter than 500 nucleotides in length. Our results demonstrate that TiO₂ nanofibers can work as a valuable tool for extraction of miRNAs from biological samples with high recovery. Graphical abstract Schematic for extraction of small RNAs using TiO₂ nanofibers.

TiO2 nanoparticles supported on PMMA nanofibers for photocatalytic degradation of methyl orange

In this paper, a photocatalyst composed of TiO₂ nanoparticles supported on the nanofibers of poly(methyl methacrylate) (PMMA) was successfully prepared by hydrothermally treating the electrospun PMMA nanofibers containing titanium n-butoxide precursor at 135°C for 8h. As-prepared composite was characterized by field-emission scanning electron microscopy, X-ray diffraction pattern, thermal gravimetric analysis and Brunauer-Emmett-Teller (BET) surface area measurements. It is revealed that high content (42%) of tetragonal anatase TiO₂ nanoparticles are uniformly loaded on the PMMA nanofibers to constitute the composite (TiO₂@PMMA) photocatalyst with BET surface area of 21.4m²g^-1. The photocatalytic activity of TiO₂@PMMA towards the degradation of methyl orange (MO), a model pollutant, has been investigated. It is observed that 0.1g of the composite could degrade 100mL of MO (10mg/L) completely within 50min under UV illumination, exhibiting a high catalytic activity. Moreover, the composite could be easily separated from the reaction system by filtration, and maintain high photocatalytic activity in five consecutive cycles of the degradation of MO, suggesting its potentials in recycling use. The work provides a new approach for the development of novel supported photocatalysts with high catalytic activity and good reusability.

Recent Advances in Electrospun Nanofiber Interfaces for Biosensing Devices

Electrospinning has emerged as a very powerful method combining efficiency, versatility and low cost to elaborate scalable ordered and complex nanofibrous assemblies from a rich variety of polymers. Electrospun nanofibers have demonstrated high potential for a wide spectrum of applications, including drug delivery, tissue engineering, energy conversion and storage, or physical and chemical sensors. The number of works related to biosensing devices integrating electrospun nanofibers has also increased substantially over the last decade. This review provides an overview of the current research activities and new trends in the field. Retaining the bioreceptor functionality is one of the main challenges associated with the production of nanofiber-based biosensing interfaces. The bioreceptors can be immobilized using various strategies, depending on the physical and chemical characteristics of both bioreceptors and nanofiber scaffolds, and on their interfacial interactions. The production of nanobiocomposites constituted by carbon, metal oxide or polymer electrospun nanofibers integrating bioreceptors and conductive nanomaterials (e.g., carbon nanotubes, metal nanoparticles) has been one of the major trends in the last few years. The use of electrospun nanofibers in ELISA-type bioassays, lab-on-a-chip and paper-based point-of-care devices is also highly promising. After a short and general description of electrospinning process, the different strategies to produce electrospun nanofiber biosensing interfaces are discussed.

Electrochemical biosensing based on protein-directed carbon nanospheres embedded with SnOx and TiO2 nanocrystals for sensitive detection of tobramycin

A series of nanocomposites comprised of homogeneous mesoporous carbon nanospheres embedded with SnO_x (x = 0, 1, or 2) and TiO₂ nanocrystals using bovine serum albumin (BSA) as template followed by calcinated at different temperatures (300, 500, 700, and 900°C) were prepared, and were denoted as SnO_x@TiO₂@mC. Then a novel electrochemical biosensing strategy for detecting tobramycin (TOB) based on the nanocomposites was constructed. The as-prepared SnO_x@TiO₂@mC nanocomposites not only possess high specific surface area and good electrochemical activity but also exhibit strong bioaffinity with the aptamer strands, therefore, they were applied as the scaffold for anchoring TOB-targeted aptamer and further used to sensitively detect trace TOB in aqueous solutions. By comparing the electrochemical biosensing responses toward TOB detection based on the four SnO_x@TiO₂@mC nanocomposites, the biosensing system constructed with SnO_x@TiO₂@mC₉₀₀ (derived at 900°C) demonstrated the highest determination efficiency, high selectivity, and good stability. In particular, the new proposed aptasensing method based on SnO_x@TiO₂@mC nanocomposite exhibits considerable potential for the quantitative detection of TOB in the biomedical field.

A simple method for micropatterning nanofibrous hydrogel film

This paper propose a new fabrication process for micropatterning a nanofibrous thin film made of bacterial cellulose(BC). BC is a hydrogel produced by specific bacteria and composed of pure cellulosic nanoflbers exhibiting 3D network structure. Such nanofibrous structure is found to be appropriate for adhesion of anchorage-dependent cells. Furthermore, BC shows high biocompatibility and mechanical toughness. Thus, the microfabrication technique for BC broadens potentials for applications. In this study, we report a new method for micropatterning BC film with feature resolution comparable with photolithography technology.

In situ integration of graphene foam-titanium nitride based bio-scaffolds and microfluidic structures for soil nutrient sensors

It is challenging to integrate porous graphene foam (GF) and GF-based nanocomposites into microfluidic channels and even create microfluidic structures within these materials. This is because their irregular interior pore shape and geometry, rough exterior surface, and relatively large material thickness make it difficult to perform conventional photolithography and etching. This challenge has largely hindered the potential of using GF-based materials in microfluidics-based sensors. Here we present a simple approach to create well-defined flow-through channels within or across the GF-based materials, using a liquid-phase photopolymerization method. This method allows embedding of a nanocomposite-based scaffold of GF and titanium nitride nanofibers (GF-TiN NFs) into a channel structure, to realize flow-through microfluidic electrochemical sensors for detecting nitrate ions in agricultural soils. The unique GF-TiN nanocomposite provides high electrochemical reactivity, high electron transfer rate, improved loading capacity of receptor biomolecules, and large surface area, serving as an efficient electrochemical sensing interface with the help of immobilized specific enzyme molecules. The microfluidic sensor provides an ultralow limit of detection of 0.01 mg L^-1, a wide dynamic range from 0.01 to 442 mg L^-1, and a high sensitivity of 683.3 μA mg^-1 L cm^-2 for nitrate ions in real soil solution samples. The advantageous features of the GF-TiN nanocomposite, in conjunction with the in situ integration approach, will enable a promising microfluidic sensor platform to monitor soil ions for nutrient management towards sustainable agriculture.

Ultrasensitive, Label Free, Chemiresistive Nanobiosensor Using Multiwalled Carbon Nanotubes Embedded Electrospun SU-8 Nanofibers

This paper reports the synthesis and fabrication of aligned electrospun nanofibers derived out of multiwalled carbon nanotubes (MWCNTs) embedded SU-8 photoresist, which are targeted towards ultrasensitive biosensor applications. The ultrasensitivity (detection in the range of fg/mL) and the specificity of these biosensors were achieved by complementing the inherent advantages of MWCNTs such as high surface to volume ratio and excellent electrical and transduction properties with the ease of surface functionalization of SU-8. The electrospinning process was optimized to precisely align nanofibers in between two electrodes of a copper microelectrode array. MWCNTs not only enhance the conductivity of SU-8 nanofibers but also act as transduction elements. In this paper, MWCNTs were embedded way beyond the percolation threshold and the optimum percentage loading of MWCNTs for maximizing the conductivity of nanofibers was figured out experimentally. As a proof of concept, the detection of myoglobin, an important biomarker for on-set of Acute Myocardial Infection (AMI) has been demonstrated by functionalizing the nanofibers with anti-myoglobin antibodies and carrying out detection using a chemiresistive method. This simple and robust device yielded a detection limit of 6 fg/mL.

Microfluidic Immuno-Biochip for Detection of Breast Cancer Biomarkers Using Hierarchical Composite of Porous Graphene and Titanium Dioxide Nanofibers

We report on a label-free microfluidic immunosensor with femtomolar sensitivity and high selectivity for early detection of epidermal growth factor receptor 2 (EGFR2 or ErbB2) proteins. This sensor utilizes a uniquely structured immunoelectrode made of porous hierarchical graphene foam (GF) modified with electrospun carbon-doped titanium dioxide nanofibers (nTiO2) as an electrochemical working electrode. Due to excellent biocompatibility, intrinsic surface defects, high reaction kinetics, and good stability for proteins, anatase nTiO2 are ideal for electrochemical sensor applications. The three-dimensional and porous features of GF allow nTiO2 to penetrate and attach to the surface of the GF by physical adsorption. Combining GF with functional nTiO2 yields high charge transfer resistance, large surface area, and porous access to the sensing surface by the analyte, resulting in new possibilities for the development of electrochemical immunosensors. Here, the enabling of EDC-NHS chemistry covalently immobilized the antibody of ErbB2 (anti-ErbB2) on the GF-nTiO2 composite. To obtain a compact sensor architecture, the composite working electrode was designed to hang above the gold counter electrode in a microfluidic channel. The sensor underwent differential pulse voltammetry and electrochemical impedance spectroscopy to quantify breast cancer biomarkers. The two methods had high sensitivities of 0.585 μA μM(-1) cm(-2) and 43.7 kΩ μM(-1) cm(-2) in a wide concentration range of target ErbB2 antigen from 1 × 10(-15) M (1.0 fM) to 0.1 × 10(-6) M (0.1 μM) and from 1 × 10(-13) M (0.1 pM) to 0.1 × 10(-6) M (0.1 μM), respectively. Utilization of the specific recognition element, i.e., anti-ErbB2, results in high specificity, even in the presence of identical members of the EGFR family of receptor tyrosine kinases, such as ErbB3 and ErbB4. Many promising applications in the field of electrochemical detection of chemical and biological species will derive from the integration of the porous GF-nTiO2 composite into microfluidic devices.

Fully Automated Centrifugal Microfluidic Device for Ultrasensitive Protein Detection from Whole Blood

Enzyme-linked immunosorbent assay (ELISA) is a promising method to detect small amount of proteins in biological samples. The devices providing a platform for reduced sample volume and assay time as well as full automation are required for potential use in point-of-care-diagnostics. Recently, we have demonstrated ultrasensitive detection of serum proteins, C-reactive protein (CRP) and cardiac troponin I (cTnI), utilizing a lab-on-a-disc composed of TiO2 nanofibrous (NF) mats. It showed a large dynamic range with femto molar (fM) detection sensitivity, from a small volume of whole blood in 30 min. The device consists of several components for blood separation, metering, mixing, and washing that are automated for improved sensitivity from low sample volumes. Here, in the video demonstration, we show the experimental protocols and know-how for the fabrication of NFs as well as the disc, their integration and the operation in the following order: processes for preparing TiO2 NF mat; transfer-printing of TiO2 NF mat onto the disc; surface modification for immune-reactions, disc assembly and operation; on-disc detection and representative results for immunoassay. Use of this device enables multiplexed analysis with minimal consumption of samples and reagents. Given the advantages, the device should find use in a wide variety of applications, and prove beneficial in facilitating the analysis of low abundant proteins.

Mesoporous Few-Layer Graphene Platform for Affinity Biosensing Application

A label-free, highly reproducible, sensitive, and selective biosensor is proposed using antiapolipoprotein B 100 (AAB) functionalized mesoporous few-layer reduced graphene oxide and nickel oxide (rGO-NiO) nanocomposite for detection of low density lipoprotein (LDL) molecules. The formation of mesoporous rGO-NiO composite on indium tin oxide conductive electrode has been accomplished via electrophoretic technique using colloidal suspension of rGO sheets and NiO nanoparticles. This biosensor shows good stability obtained by surface conjugation of antibody AAB molecules with rGO-NiO matrix by EDC-NHS coupling chemistry. The defect-less few layer rGO sheets, NiO nanoparticles (nNiO) and formation of nanocomposite has been confirmed by Raman mapping, electron microscopic studies, X-ray diffraction, and electrochemical techniques. The synthesized rGO-NiO composite is mesoporous dominated with a small percentage of micro and macroporous structure as is evident by the results of Brunauer-Emmett-Teller experiment. Further, the bioconjugation of AAB with rGO-NiO has been investigated by Fourier transform-infrared spectroscopy studies. The kinetic studies for binding of antigen-antibody (LDL-AAB) and analytical performance of this biosensor have been evaluated by the impedance spectroscopic method. This biosensor exhibits an excellent sensitivity of 510 Ω (mg/dL)(-1) cm(-2) for detection of LDL molecules and is sensitive to 5 mg/dL concentration of LDL in a wide range of 0-130 mg/dL. Thus, this fabricated biosensor is an efficient and highly sensitive platform for the analysis of other antigen-antibody interactions and biomolecules detection.

Towards a novel bioelectrocatalytic platform based on "wiring" of pyrroloquinoline quinone-dependent glucose dehydrogenase with an electrospun conductive polymeric fiber architecture

Electrospinning is known as a fabrication technique for electrode architectures that serve as immobilization matrices for biomolecules. The current work demonstrates a novel approach to construct a conductive polymeric platform, capable not only of immobilization, but also of electrical connection of the biomolecule with the electrode. It is produced upon electrospinning from mixtures of three different highly conductive sulfonated polyanilines and polyacrylonitrile on ITO electrodes. The resulting fiber mats are with a well-retained conductivity. After coupling the enzyme pyrroloquinoline quinone-dependent glucose dehydrogenase (PQQ-GDH) to polymeric structures and addition of the substrate glucose an efficient bioelectrocatalysis is demonstrated. Depending on the choice of the sulfonated polyanilline mediatorless bioelectrocatalysis starts at low potentials; no large overpotential is needed to drive the reaction. Thus, the electrospun conductive immobilization matrix acts here as a transducing element, representing a promising strategy to use 3D polymeric scaffolds as wiring agents for active enzymes. In addition, the mild and well reproducible fabrication process and the active role of the polymer film in withdrawing electrons from the reduced PQQ-GDH lead to a system with high stability. This could provide access to a larger group of enzymes for bioelectrochemical applications including biosensors and biofuel cells.

Quantum dot sensitized electrospun mesoporous titanium dioxide hollow nanofibers for photocatalytic applications

TiO₂ hollow nanofibers prepared by coaxial electrospinning were sensitized with CdS QDs by SILAR method and their photocatalytic dye degradation performance was investigated.

Single-step electrospun TiO2–Au hybrid electrodes for high selectivity photoelectrocatalytic glutathione bioanalysis

One-step electrospun Au nanoparticle decorated TiO₂ nanofiber membrane served as effective photoanode for highly selective glutathione analysis with a photoelectrocatalytic oxidation process.

A biofunctionalized quantum dot–nickel oxide nanorod based smart platform for lipid detection

A label-free and sensitive immunosensor has been fabricated using an antibody conjugated CdS–NiO nanocomposite for detection of lipids in serum samples.