Occurrences and removal of pharmaceuticals and personal care products (PPCPs) in drinking water and water/sewage treatment plants: A review

Efficient peroxymonosulfate activation by Zn/Fe metal-organic framework-derived ZnO/Fe3 O4 @carbon spheres for the degradation of Acid Orange 7

ZnO/Fe₃ O₄ @carbon spheres, which synthesized via a calcination process used Zn/Fe metal-organic frameworks (Zn/Fe-MOFs) as a precursor, were studied for the activation of peroxymonosulfate (PMS) for the degradation of Acid Orange 7 (AO7). The ZnO/Fe₃ O₄ @carbon spheres exhibited relatively high catalytic degradation properties for AO7 in an aqueous solution. The AO7 degradation reached 93.6% in 15 min under the conditions: 0.20 g/L ZnO/Fe₃ O₄ @carbon spheres, 1.25 mmol/L PMS, 0.03 mmol/L AO7, and initial pH of 4. Findings revealed that higher ZnO/Fe₃ O₄ @carbon spheres dose and PMS concentration, lower initial AO7 concentration, and acidic pH favored the AO7 degradation to a certain extent. The mechanisms for the activation of PMS by ZnO/Fe₃ O₄ @carbon spheres were proposed based on the results of radical identification tests and structure characterization. Both radical and nonradical pathways contribute to the AO7 degradation in this system. PRACTITIONER POINTS: PMS + ZnO/Fe₃ O₄ @carbon spheres system can effectively catalyze PMS to decompose AO7. Both radical and nonradical pathways contribute to the degradation of AO7 in this system. The acidic condition was favorable for the activation of PMS.

Occurrence, removal and seasonal variation of pharmaceuticals in Brasilian drinking water treatment plants

The presence of pharmaceuticals in aquatic environments has become a major issue of concern for scientific community, since there is a lack of information about risks and impacts to the environment and public health. In the context of Brazil, many cities do not have Wastewater Treatment Plants (WWTPs) and domestic sewage is dumped directly into the water bodies, aggravating the problem. Thus, the present study aimed to evaluate the presence of 28 prescribed pharmaceuticals from different therapeutic classes in six full-scale Drinking Water Treatment Plants (DWTPs) in Minas Gerais state. Samples were collected in twelve field campaigns from August 2016 to August 2017 and water quality were monitored. Analytical methodology was based on solid phase extraction (C18 cartridge) followed by High Performance Liquid Chromatography (Prominence DGU/20A3 - Shimadzu) coupled to Mass Spectrometry (micrOTOF-QII - Bruker). Considering the 28 pharmaceuticals analyzed, 18 were detected in the surface water source at concentrations ranging from Method Quantification Limit (MQL) to 11,960 ng/L. In drinking water, the concentration of the 11 pharmaceuticals detected ranged from <MQL to 6323 ng/L. Betamethasone, Fluconazole, Atorvastatin and Prednisone were the most detected pharmaceuticals. The drinking water monitoring showed a decrease in the concentration of all detected pharmaceuticals, indicating some removal of these compounds by the water treatment processes. The removal efficiency assessed shows a great variation among different compounds, DWTPs and over the year, ranging from an average of 32% ± 6% (Prednisone -DWTP3) to 100% ± 0% for some pharmaceuticals. The highest total concentrations and the maximum concentration values for the most frequently detected pharmaceuticals were related to the winter due, presumably, to lower dilution and temperature. Trace levels of pharmaceuticals were detected in surface and drinking water in Brazil and conventional DWTPs were not able to remove the pharmaceuticals completely.

Removal of pharmaceuticals and personal care products using constructed wetlands: effective plant-bacteria synergism may enhance degradation efficiency

Post-industrial era has witnessed significant advancements at unprecedented rates in the field of medicine and cosmetics, which has led to affluent use of pharmaceuticals and personal care products (PPCPs). However, this has exacerbated the influx of various pollutants in the environment affecting living organisms through multiple routes. Thousands of PPCPs of various classes-prescription and non-prescription drugs-are discharged directly into the environment. In this review, we have surveyed literature investigating plant-based remediation practices to remove PPCPs from the environment. Our specific aim is to highlight the importance of plant-bacteria interplay for sustainable remediation of PPCPs. The green technologies not only are successfully curbing organic pollutants but also have displayed certain limitations. For example, the presence of biologically active compounds within plant rhizosphere may affect plant growth and hence compromise the phytoremediation potential of constructed wetlands. To overcome these hindrances, combined use of plants and beneficial bacteria has been employed. The microbes (both rhizo- and endophytes) in this type of system not only degrade PPCPs directly but also accelerate plant growth by producing growth-promoting enzymes and hence remediation potential of constructed wetlands.

Comparative adsorption of emerging contaminants in water by functional designed magnetic poly(N-isopropylacrylamide)/chitosan hydrogels

The magnetic poly(N-isopropylacrylamide)/chitosan hydrogel with interpenetrating network (IPN) structure was designed based on the functional groups of targeted emerging contaminants, represented by hydrophilic sulfamethoxazole (SMZ) and hydrophobic bisphenol A (BPA). The average particle size, specific surface area, and total pore volume of the hydrogel were turned out to be 103.7 μm, 60.70 m²/g and 0.0672 cm³/g, respectively. Adsorption results indicated that the maximum adsorption capacity occurred at the pH where SMZ was anionic and BPA was uncharged. When the adsorption temperature increased from 25 °C to 35 °C, the amount of adsorbed SMZ hardly changed, but that of BPA increased by two times. The adsorption capacity of the binary system (i.e., with both SMZ and BPA) was almost the same as that of the single system, indicating that simultaneous adsorption of SMZ and BPA was achieved. The adsorption equilibrium was reached quickly (within 5 min) for both SMZ and BPA. For adsorption isotherm, the Freundlich model fitted well for SMZ at 25, 35 and 45 °C. However, the adsorption of BPA exhibited the sigmoidally shaped isotherm at 25 °C with the Slips model fitting well, and both the Freundlich isotherm and the Slips isotherm fitted the data well at 35 °C and 45 °C, suggesting that the adsorption force was initially weak but greatly enhanced with an increase in adsorbate concentration or ambient temperature. The main adsorption mechanism was inferred to be electrostatic interactions for SMZ, and hydrophobic interactions as well as hydrogen bonding for BPA. The hydrogel adsorbent maintained favorable adsorption capacity for BPA after five adsorption-desorption cycles. These findings may provide a strategy for designing high performance adsorbents that can remove both hydrophilic and hydrophobic organic contaminants in the aquatic environment.

Water depollution using metal-organic frameworks-catalyzed advanced oxidation processes: A review

This paper presents a review on the environmental applications of metal-organic frameworks (MOFs), which are inorganic-organic hybrid highly porous crystalline materials, prepared from metal ion/clusters and multidentate organic ligands. The emphases are made on the enhancement of the performance of advanced oxidation processes (AOPs) (photocatalysis, Fenton reaction methods, and sulfate radical (SO₄^-)-mediated oxidations) using MOFs materials. MOFs act as adsorption and light absorbers, leading to superior performance of photocatalytic processes. More recent examples of photocatalytic degradation of dyes are presented. Additionally, it is commonly shown that Fe-based MOFs exhibited excellent catalytic performance on the Fenton-based and SO₄^•--mediated oxidations of organic pollutants (e.g., dyes, phenol and pharmaceuticals). The significantly enhanced generation of reactive species such as OH and/or SO₄^- by both homogeneous and heterogeneous catalysis was proposed as the possible mechanism for water depollution. Based on the existing literature, the challenge and future perspectives in MOF-based AOPs are addressed.

Removal and fate of emerging organic micropollutants (EOMs) in municipal wastewater by a pilot-scale membrane bioreactor (MBR) treatment under varying solid retention times

This study investigates the removal and fate of 23 emerging organic micropollutants (EOMs) including a wide range of pharmaceuticals (antibiotics, β-blockers, analgesics, diuretics, psychostimulants, antiepileptics, immunosuppressives, anticoagulants), and steroid hormones detected in municipal wastewater by a pilot-scale membrane bioreactor (MBR) plant at two different solid retention times (SRTs) of 60 and 21 days. Different removal efficiencies of the selected EOMs were observed and explained based on their physicochemical properties (such as distribution coefficient, log D; dissociation constant, pK_a; solid-water distribution coefficients, and K_d) along with process operating parameters. The dominant removal mechanisms of EOMs were biotransformation and sorption onto the sludge, which were confirmed by the mass balance study. Moreover, changes in the sludge properties, as a consequence of different SRTs, were evaluated based on variations in soluble microbial products (SMP), extracellular polymeric substances (EPS), and capillary suction time (CST). Finally, the quality of the MBR effluent was compared with some established guidelines, which confirmed the fulfilment of water quality requirements for reuse purposes.

Uptake and biodegradation of emerging contaminant sulfamethoxazole from aqueous phase using Ipomoea aquatica

Plants serve as appropriate markers of worldwide pollution because they are present in almost every corner of the globe and bioaccumulate xenobiotic chemicals from their environment. The potential of a semi-aquatic plant, Ipomoea aquatica, to uptake and metabolize sulfamethoxazole (SMX) was investigated in this study. I. aquatica exhibited 100% removal of 0.05 mg L^-1 SMX from synthetic media within 30 h. The I. aquatica achieved 93, 77 and 72% removal of SMX at 0.2, 0.5 and 1 mg L^-1, respectively, after 48 h. This indicated that removal efficiency of I. aquatica was deteriorating at high concentrations of SMX. The chlorophyll and carotenoid content of I. aquatica was insignificantly influenced by SMX irrespective of its high concentration. Similarly, scanning electron microscopy (SEM) showed that exposure to SMX had an insignificant impact on morphology of the plant organelles. The mechanisms of removal by I. aquatica were explored by evaluating contributions of bioadsorption, bioaccumulation and biodegradation. There was negligible adsorption of SMX to plant roots. Accumulation of SMX within plant roots and stems was not observed; however, I. aquatica accumulated 17% of SMX in leaves. Thus, the major mechanism of elimination of SMX was biodegradation, which accounted for 82% removal of SMX. Gas chromatography-mass spectrometry (GC-MS) confirmed that I. aquatica biodegraded SMX into simpler compounds, and generated 4-aminophenol as its final product. A laboratory scale phytoreactor was used to investigate the application of I. aquatica in a simulated system, where it achieved 49% removal of SMX (0.2 mg L^-1) in 10 d.

Long-term continuous treatment of non-sterile real hospital wastewater by Trametes versicolor

BACKGROUND

Hospital wastewater is commonly polluted with high loads of pharmaceutically active compounds, which pass through wastewater treatment plants (WWTPs) and end up in water bodies, posing ecological and health risks. White-rot fungal treatments can cope with the elimination of a wide variety of micropollutants while remaining ecologically and economically attractive. Unfortunately, bacterial contamination has impeded so far a successful implementation of fungal treatment for real applications.

RESULTS

This work embodied a 91-day long-term robust continuous fungal operation treating real non-sterile hospital wastewater in an air pulsed fluidized bed bioreactor retaining the biomass. The hydraulic retention time was 3 days and the ageing of the biomass was avoided through partial periodic biomass renovation resulting in a cellular retention time of 21 days. Evolution of microbial community and Trametes abundance were evaluated.

CONCLUSIONS

The operation was able to maintain an average pharmaceutical load removal of over 70% while keeping the white-rot fungus active and predominant through the operation.

Use of the Chemcatcher® passive sampler and time-of-flight mass spectrometry to screen for emerging pollutants in rivers in Gauteng Province of South Africa

Many rivers in urbanised catchments in South Africa are polluted by raw sewage and effluent to an extent that their ecological function has been severely impaired. The Hennops and Jukskei Rivers lying in the Hartbeespoort Dam catchment are two of the worst impacted rivers in South Africa and are in need of rehabilitation. Passive sampling (Chemcatcher® with a HLB receiving phase) together with high-resolution tandem mass spectrometry-targeted screening was used to provide high sensitivity and selectivity for the identification of a wide range of emerging pollutants in these urban waters. Over 200 compounds, including pesticides, pharmaceuticals and personal care products, drugs of abuse and their metabolites were identified. Many substances (~ 180) being detected for the first time in surface water in South Africa. General medicines and psychotropic drugs were the two most frequently detected groups in the catchment. These accounted for 49% of the emerging pollutants found. Of the general medicines, antihypertensive agents, beta-blocking and cardiac drugs were the most abundant (28%) classes detected. The Hennops site, downstream of a dysfunctional wastewater treatment plant, was the most polluted with 123 substances detected. From the compounds detected, peak intensity-based prioritisation was used to identify the five most abundant pollutants, being in the order caffeine > lopinavir > sulfamethoxazole > cotinine > trimethoprim. This work provides the largest available high-quality dataset of emerging pollutants detected in South African urban waters. The data generated in this study provides a solid foundation for subsequent work to further characterise (suspect screening) and quantify (target analysis) these substances.

Decolorization of Orange-G Aqueous Solutions over C60/MCM-41 Photocatalysts

The majority of the photocatalysts studied for azo-dye degradation are based on semiconductor materials. Studies reported on non-semiconducting materials are very scarce. In the present work, we studied the fullerene (C60) ability to accelerate photodegradation of the dye’s azo bond in the presence of ascorbic acid. A series of C60 supported on ordered mesoporous silica (MCM-41) catalysts, containing 1, 3, 6, 9, and 12 wt % of fullerene C60, was studied using Orange G (OG) as representative azo-dye. This study showed that partial decolorization is achieved in the dark by simple adsorption of the dye on the bare surface of the carrier. The extent of decolorization increases with the irradiation of the suspension due to photocatalytic degradation of the azo-bond. This is maximized over the sample containing 3 wt % of C60 and it has been attributed to the best combination of the extent of the dye adsorption with the high intrinsic photocatalytic activity of small C60 clusters predominated in this sample. This catalyst proved to be quite stable upon five subsequent photocatalytic cycles, losing less than 5% of its initial activity. No degradation of OG takes place in the absence of ascorbic acid.

Adsorption of diclofenac sodium on bilayer amino-functionalized cellulose nanocrystals/chitosan composite

Residual diclofenac sodium (DS) in the environment is harmful to human health. A promising method for DS removal is the use of adsorbents functionalized with amino groups that can form an ionic bond with the carboxyl group of DS at a suitable pH. In this work, a novel composite adsorbent composed of cellulose nanocrystals (CNC) and chitosan (CS) has been synthesized and functionalized by ethylenediamine (ED) in both layers. Characterization methods, including scanning electron microscopy, transmission electron microscopy, energy-dispersive X-ray spectroscopy, Fourier-transform infrared spectrometry, and X-ray photoelectron spectroscopy, were used to confirm the morphology and synthetic mechanism of the double- amino-functionalized adsorbent. Based on the optimization of adsorption conditions and modeling of the adsorption mechanism, the DS adsorption process on CNC-ED@CS-ED involves chemical adsorption, and the maximum adsorption capacity obtained from the Langmuir model is 444.44 mg/g. CNC-ED@CS-ED exhibits good adsorption capacity and high sustainability; thus, it is a promising composite material for the removal of DS from wastewater.

Identification of effective parameters for anti-inflammatory concentration in València City's wastewater using fuzzy-set qualitative comparative analysis

The current literature about pharmaceutical and personal care compounds (PPCPs) focuses on identifying their concentration and toxicological risk both in surface water and in wastewater. However, the influence of urban areas (population ageing, income level, hospitals and others) has not yet been analysed. Knowing how a population (and its facilities) affects PPCPs' presence in wastewater is important to identify the conditions that are responsible for their presence. In this work, the influence of water consumption, population ageing, income level, hospitals and nursing homes on the anti-inflammatory concentration have been analysed. To fill the gap between the quantitative data on PPCPs' concentration and the qualitative reasoning of the influence of urban areas on the anti-inflammatory concentration, the use of fuzzy-set qualitative comparative analysis (fsQCA) is proposed. The fsQCA results are presented as recipes that show the different causal combinations of conditions that explain the presence of anti-inflammatories in wastewater. Using fsQCA for urban wastewater management with the aim of explaining the presence of anti-inflammatories in wastewater treatment plants (WWTPs) is a novelty in the literature. The results obtained here show the influence of water consumption (WATCON), hospitals (HOSP) and population ageing (POPAG) as the main conditions for the anti-inflammatory concentration in Valèncian wastewater. Specifically, these conditions are present in all the recipes obtained with consistency of 99%. Through the results obtained, it would be possible to identify that HOSP are the main facilities that discharge anti-inflammatories into urban wastewater. Hence, the necessity of preventive measures to avoid the anti-inflammatory discharge into water bodies has been showed. Furthermore, under a methodological point of view, this work highlights the eligibility of fsQCA as a wastewater cycle management tool.

Characterization of the Primary Sludge from Pharmaceutical Industry Effluents and Final Disposition

The generation of large volumes of waste by industrial processes has become an object of study because of the necessity to characterize the composition of residues in order to suggest appropriate treatments and to minimize adverse environmental impacts. We performed analyses of total fixed and volatile solids, moisture, and chemical oxygen demand (COD). We found high organic matter content. We also measured physicochemical characteristics, including corrosivity, reactivity, and toxicity. Sewage sludge showed levels of chloride and sodium above the maximum allowed limits. These data suggest the potential for anaerobic digestion as a treatment option for sewage sludge and for its use as a biofertilizer.

Removal of metronidazole and amoxicillin mixtures by UV/TiO2 photocatalysis: an insight into degradation pathways and performance improvement

The degradation efficiencies and pathways of metronidazole (MNZ) and amoxicillin (AMX) in binary mixtures by UV/TiO₂ photocatalysis were studied. The presence of AMX significantly decreased the degradation of MNZ, whereas the existence of MNZ slightly reduced the degradation of AMX. This is basically due to the difference in attack ability of oxidizing agents present during TiO₂ photocatalysis. All oxidizing agents (hydroxyl radicals, superoxide radicals, and holes) could attack AMX molecules, but hydroxyl radicals showed insignificant attack ability in MNZ degradation. In TiO₂ photocatalysis of binary mixture, six transformation products were recognized by a high-resolution LC-QTof/MS. Because of competitive effect, only one product was sourced from MNZ degradation and four others were formed due to AMX degradation. The remaining one was a new product of the side reaction. This work indicated that the molecular structure of AMX determined its preferred degradation in a mixture. It not only affected the removal of antibiotics but also figured out the appearance of transformation products. In contrast to single systems, the extent of degradation reduced for each antibiotic in the presence of the second antibiotic was related to the availability of degradation pathways of each antibiotic. Moreover, suitable pH programming was applied to enhance the mineralization of the mixtures.

Three-dimensional macroporous graphene-wrapped zero-valent copper nanoparticles as efficient micro-electrolysis-promoted Fenton-like catalysts for metronidazole removal

Three-dimensional macroporous graphene-wrapped zero-valent copper nanoparticles (3D-GN@Cu⁰) were synthesized using a self-assembly process of liquid-phase reduction and characterized by field emission scanning electron microscopy, nitrogen adsorption/desorption isotherms, X-ray diffraction, Raman spectrum analysis, and X-ray photoelectron spectroscopy. The catalytic activity of 3D-GN@Cu⁰ was evaluated in view of the effects of various systems, the pH value, catalyst dosage, initial metronidazole concentration and temperature, and it showed a high efficiency for removing metronidazole with saturated dissolved oxygen (without adding extra H₂O₂) in a wide range of pH value from 3.2 to 9.8. Combined with the results of dissolved oxygen activation, determination of reactive oxidizing species, and X-ray photoelectron spectroscopy (XPS) analysis, the surface-bounded ·OH_ads formed by the reaction of the in situ generation H₂O₂ with 3D-GN@Cu⁰ was mainly responsible for the removal of metronidazole. The charge distribution and electrostatic potential (ESP) of 3D-GN@Cu⁰ further illustrated the distribution and transfer of electrons on the catalyst surface, which predicted a micro-electrolysis-promoted Fenton-like reaction mechanism.

Magnetically separable BiOBr/Fe3O4@SiO2 for visible-light-driven photocatalytic degradation of ibuprofen: Mechanistic investigation and prototype development

The increasingly ubiquitous release of emerging refractory pollutants into water is a serious concern due to associated risks. In this study, mesoporous hierarchical BiOBr/Fe₃O₄@SiO₂-a solvothermally synthesized visible-light-driven magnetic photocatalyst-not only exhibited fast kinetics (t_1/2 = 8.7 min) in the photocatalytic degradation of ibuprofen in water but also achieved almost complete mineralization over a prolonged irradiation of 6 h. Various reactive species, including O₂¯, OH, and H₂O₂, were detected, while the scavenging experiments revealed that e_CB^--mediated reactions and direct-hole oxidation are the major degradation routes. The magnetically recycled BiOBr/Fe₃O₄@SiO₂ maintained ∼80% of its initial photocatalytic activity even after five consecutive cycles. The typically copresent wastewater constituents, including NOM and anions, inhibited the photocatalytic performance to varying extents, and hence necessitated an increase in the photocatalyst dosage to achieve complete ibuprofen degradation in real sewage. Based on the findings of batch experiments, the process was scaled up by developing a 5 L prototype photocatalytic reactor integrated with an electromagnetic separation unit. The results of prototype photocatalytic experiments were comparable to those of batch experiments, and an electromagnetic separation efficiency of ∼99% was achievable in 5 min.

Possible involvement of Fas/FasL-dependent apoptotic pathway in α-bisabolol induced cardiotoxicity in zebrafish embryos

α-Bisabolol, an unsaturated monocyclic sesquiterpene alcohol, is a common ingredient in many pharmaceuticals and personal care products (PPCPs). Despite being widely used, little is known about its toxic effects on organisms and aquatic environment. In this study, we investigated the developmental toxicity of α-Bisabolol, especially its effects on the cardiac development using zebrafish embryos as a model. Embryos at 4 h post-fertilization (hpf) were exposed to 10, 30, 50, 70, 90, and 100 μM α-Bisabolol until 144 hpf. α-Bisabolol caused phenotypic defects and the most striking one is the heart malformation. Treatment of α-Bisabolol significantly increased the cardiac malformation rate, the SV-BA distance, as well as the pericardial edema area, and reduced heart rate in a concentration-dependent manner. Notably, considerable numbers of apoptotic cells were mainly observed in the heart region of zebrafish treated with α-Bisabolol. Further study on α-Bisabolol induced apoptosis in the zebrafsh heart suggested that an activation of Fas/FasL-dependent apoptotic pathway. Taken together, our study investigated the cardiotoxicity of α-Bisabolol on zebrafish embryonic development and its underlying molecular mechanism, shedding light on the full understanding of α-Bisabolol toxicity on living organisms and its environmental impact.

Organic micropollutants in a large wastewater treatment plant: What are the benefits of an advanced treatment by activated carbon adsorption in comparison to conventional treatment?

Several advanced treatments, such as ozonation or activated carbon adsorption, are currently considered for the removal of organic micropollutants (OMPs) in wastewater treatment plants (WWTP). However, little is known on the overall performances of a WWTP upgraded with those processes and the benefits provided regarding the elimination of multiple families of OMPs. In this study, 5 sampling campaigns were performed to determine the removal of 48 OMPs in a WWTP followed by an activated carbon pilot. The primary treatment had no effect on OMPs (removals < 20%), whereas the biological treatment removed OMPs that can be easily sorbed onto sludges or biodegraded (>60%). The additional elimination provided by the advanced treatment was not significant (<10%) for OMPs already well removed in the WWTP) but was substantial (>30%) for recalcitrant OMPs. Removals higher than 60% were obtained for all OMPs (except azithromycin and sulfamethoxazole) over the WWTP and the activated carbon pilot. The adsorption conditions (10 g/m³ fresh activated carbon addition) were not sufficient to achieve the 80% removal targeted in Switzerland for compounds suggested as indicator substances for wastewater treatment. A higher dose of activated carbon or the combination with another advanced treatment should be used to achieve a satisfactory removal of those compounds.

Emerging contaminants of high concern and their enzyme-assisted biodegradation - A review

The widespread occurrence and adverse environmental and health-related impacts of various types of emerging contaminants (ECs) have become an issue of high concern. With ever increasing scientific knowledge, socio-economic awareness, health-related problems and ecological apprehensions, people are more concerned about the widespread ECs, around the globe. Among ECs, biologically active compounds from pharmaceutical, cosmeceutical, biomedical, personal care products (PPCPs), endocrine-disrupting chemicals (EDCs), and flame-retardants are of paramount concern. The presence and persistence of ECs in water bodies are of continued and burning interest, worldwide. Various types of ECs are being discharged knowingly/unknowingly with/without partial treatments into the aquatic environments that pose serious health issues and affects the entire living ecosystem. So far, various approaches have been developed for ECs degradation and removal to diminish their adverse impact. Many previous and/or ongoing studies have focused on contaminants degradation and efficient removal via numerous treatment strategies, i.e. (1) physical, (2) chemical and (3) biological. However, the experimental evidence is lacking to enable specific predictions about ECs mechanistic degradation and removal fate across various in-practice systems. In this context, the deployment oxidoreductases such as peroxidases (lignin peroxidases, manganese-dependent peroxidases, and horseradish peroxidase), aromatic dioxygenases, various oxygenases, laccases, and tyrosinases have received considerable research attention. Immobilization is highlighted as a promising approach to improve enzyme catalytic performance and stabilization, as well as, to protect the three-dimensional structure of the enzyme against the undesirable consequences of harsh reaction environment. This work overviews the current and state-of-the-art critical aspect related to hazardous pollutants at large and ECs in particular by the immobilized oxidoreductase enzymes. The first part of the review focuses on the occurrence, physiochemical behavior, potent sources and significant routes of ECs. Following that, environmentally-related adverse impacts and health-related issues of ECs are discussed in the second part. In the third part, biodegradation and removal strategies with a comparative overview of several conventional vs. non-conventional methods are presented briefly. The fourth part majorly focuses on operational modes of different oxidoreductase enzyme-based biocatalytic processes for the biodegradation and biotransformation of a wide array of harmful environmental contaminants. Finally, the left behind research gaps, concluding remarks as well as future trends and recommendations in the use of carrier-immobilized oxidoreductases for environmental perspective are also discussed.

Occurrence of antibiotics in the main rivers of Shenzhen, China: Association with antibiotic resistance genes and microbial community

The occurrence and distribution of antibiotics were investigated in surface water and sediment collected from the main rivers of Shenzhen, China. Total concentrations of 20 selected antibiotics ranged from 36.510 to 1075.687 ng L^-1 (mean 244.992 ng L^-1) in 31 water samples and from 28.124 to 2728.810 ng g^-1 (mean 680.169 ng g^-1) in 31 sediment samples. Notably, STZ and SDZ were the dominant antibiotics in both water and sediment as their higher concentrations compared with the other compounds. Furthermore, comprehensive profiling of antibiotic resistance genes (ARGs) and microbial community was performed to gain an understanding of the evolution and dissemination of ARGs in microbial communities caused by the occurrence of antibiotics in sediment samples from Maozhou River. As a result, the sul1 gene was found to be the most abundant ARG and Proteobacteria was the most abundant microorganism in all the samples (37.4-51.7%), followed by Bacteroidetes (15.3-18.4%). Statistical analysis figured out the relations among antibiotics, ARGs and microbial community. A specific conclusion could be drawn from the positive correlations among the bla_d gene, Fusobacteria, and sulfamethoxazole. It suggests that antibiotics may be positively linked to the expression of ARGs in certain bacteria, and thus high reproduction would occur within the bacterial community. Overall, the widespread distribution of ARGs underscores the need for further research on the mechanism of antibiotics influence as emerging contaminants in the environment and the associated risks to microbial community.

Obtaining granular activated carbon from paper mill sludge - A challenge for application in the removal of pharmaceuticals from wastewater

In this work, a granular activated carbon (GAC) was produced using primary paper mill sludge (PS) as raw material and ammonium lignosulfonate (AL) as binder agent. PS is a residue from the pulp and paper industry and AL is a by-product of the cellulose pulp manufacture and the proposed production scheme contributes for their valorisation together with important savings in GAC precursors. The produced GAC (named PSA-PA) and a commercially available GAC (GACN), used as reference material, were physically and chemically characterized. Then, these materials were tested in batch experiments for the adsorption of carbamazepine (CBZ), sulfamethoxazole (SMX), and paroxetine (PAR) from ultra-pure water and wastewater. Even though GACN and PSA-PA possess very similar specific surface areas (S_BET) (629 and 671 m² g^-1, respectively), PSA-PA displayed lower maximum adsorption capacities (q_m) than GACN for the pharmaceuticals here studied (6 ± 1-44 ± 5 mg g^-1 and 49 ± 6-106 ± 40 mg g^-1, respectively). This may be related to the comparatively higher incidence of mesopores in GACN, which might have positively influenced its adsorptive performance. Moreover, the highest hydrophobic character and degree of aromaticity of GACN could also have contributed to its adsorption capacity. On the other hand, the performance of both GACs was significantly affected by the matrix in the case of CBZ and SMX, with lower q_m in wastewater than in ultra-pure water. However, the adsorption of PAR was not affected by the matrix. Electrostatic interactions and pH effects might also have influenced the adsorption of the pharmaceutical compounds in wastewater.

Micro-TiO2 coated glass surfaces safely abate drugs in surface water

The ingredients of Pharmaceuticals and Personal Care Products (PPCPs) persist in water and conventional treatment plants are not able to remove them efficiently. Sonochemical treatment is insufficient to mineralize organics such as ibuprofen into CO₂ and H₂O. TiO₂ degrades ibuprofen (IBP) under UV light; however, it does not reach a high grade of conversion. Here, we investigated the mineralization of ibuprofen to CO₂ by TiO₂ UV-C photocatalysis. We replaced nano-sized P25 (the standard catalyst) with a micro-sized commercial sample of TiO₂ to preclude the use of nanoparticles which are dangerous for human health and because typical filtration systems are expensive and inefficient. We deposited micro-TiO₂ on glass Raschig rings to ensure an easy recovery and reuse of the photocatalyst and we studied its performance both with a batch and a continuous reactor. Micro-TiO₂ mineralized 100% of IBP in 24 h. TiO₂-coated glass Raschig rings degraded 87% of IBP in 6 h of UV-C irradiation in a continuous reactor, with a mineralization of 25%. Electronspray ionization mass spectrometer (ESI-MS, positive mode) analyses identified 13 different byproducts and we hypothised a degradration pathway for IBP degradation.

Occurence and Prioritization of Pharmaceutical Active Compounds in Domestic/Municipal Wastewater Treatment Plants

In this study, pharmaceutically active compounds (PhACs) were analyzed in the influent and effluent of a domestic wastewater treatment plant in Turkey and a municipal wastewater treatment plant in Germany and the toxicity of these wastewaters were estimated using a toxic unit (TU) approach. A total of 21 and 32 PhACs were detected in the domestic wastewater and the municipal wastewater, respectively. The TUs estimated for PhACs in municipal wastewater were higher than the TUs estimated for PhACs present in domestic wastewater. The levels of the anti-anxiety drug, oxazepam were estimated to be in the high risk category (HQ > 10) in both wastewaters. In bench-scale tests with ozonation, the removals of four PhACs in the municipal wastewater were investigated. At a dose of 2 mg/L ozone, 97%-98% of diclofenac and carbamazepine were removed. The lowest removal rate at 71% was observed for metoprolol.

Maternal swimming pool exposure during pregnancy in relation to birth outcomes and cord blood DNA methylation among private well users

Swimming in pools during pregnancy may expose the fetus to water disinfection by-products (DBP). As yet, our understanding of the impacts on DBPs on the fetus is uncertain. Individuals with public water systems are typically exposed to DBPs through drinking, showering and bathing, whereas among those on private water systems, swimming in pools may be the primary exposure source. We analyzed the effects of maternal swimming on birth outcomes and cord blood epigenetic changes in the New Hampshire Birth Cohort Study, a cohort of pregnant women with households on private water systems. Information about swimming in pools during pregnancy was obtained from 1033 women via questionnaires. Swimming pool use and duration were modeled using linear regression with newborn weight, length, and head circumference (z-scores) and genome wide cord blood DNA methylation as the outcomes and with adjustment for potential confounders. Overall 19.7% of women reported swimming in a pool during pregnancy. Among swimmers, duration of swimming was inversely related to head circumference (-0.02 z-score per 10% increase in duration, P = 0.004). No associations were observed with birth weight, length or DNA methylation modifications. Our findings suggest swimming pool exposure may impact the developing fetus although longer-term studies are needed.

Effect of Activating Agent on the Properties of TiO₂/Activated Carbon Heterostructures for Solar Photocatalytic Degradation of Acetaminophen

Several activated carbons (ACs) were prepared by chemical activation of lignin with different activating agents (FeCl₃, ZnCl₂, H₃PO₄ and KOH) and used for synthesizing TiO₂/activated carbon heterostructures. These heterostructures were obtained by the combination of the activated carbons with a titania precursor using a solvothermal treatment. The synthesized materials were fully characterized (Wavelength-dispersive X-ray fluorescence (WDXRF), X-ray diffraction (XRD), Scanning electron microscopy (SEM), N2 adsorption-desorption, Fourier transform infrared (FTIR) and UV-visible diffuse reflectance spectra (UV-Vis DRS) and further used in the photodegradation of a target pharmaceutical compound (acetaminophen). All heterostructures were composed of anatase phase regardless of the activated carbon used, while the porous texture and surface chemistry depended on the chemical compound used to activate the lignin. Among all heterostructures studied, that obtained by FeCl₃-activation yielded complete conversion of acetaminophen after 6 h of reaction under solar-simulated irradiation, also showing high conversion after successive cycles. Although the reaction rate was lower than the observed with bare TiO₂, the heterostructure showed higher settling velocity, thus being considerably easier to recover from the reaction medium.

Phytoremediation: green technology for the removal of mixed contaminants of a water supply reservoir

The Iraí Reservoir, a water supply in Brazil, is constantly impacted by anthropogenic activities such as waste inputs from agriculture, hospitals and urbanization, resulting toxic cyanobacterial blooms causing economic, social and environmental problems. This study assessed the concentration of some common contaminants of the Iraí Reservoir, namely paracetamol, diclofenac and microcystin-LR and tested whether a laboratory scale Green Liver System^® would serve as a suitable technology to remove these contaminants. Further, the study investigated whether the pollutants caused adverse effects to the macrophytes using catalase as a biomarker for oxidative stress and investigated whether biotransformation (glutathione S-transferase) was a main route for detoxification. Egeria densa, Ceratophyllum demersum and Myriophyllum aquaticum were exposed to a mixture of the three contaminants for 14 days in a concentration range similar to those detected in the reservoir. The plants removed 93% of diclofenac and 100% of MC-LR after 14 days. Paracetamol could not be detected. Catalase and glutathione S-transferase enzyme activities remained unaltered after the 14-day exposure, indicating that the mixture did not cause oxidative stress. The study showed that the aquatic macrophytes used are suitable tools to apply in a Green Liver System^® for the remediation of mixed pollutants.

Performance of secondary wastewater treatment methods for the removal of contaminants of emerging concern implicated in crop uptake and antibiotic resistance spread: A review

Contaminants of emerging concern (CEC) discharged in effluents of wastewater treatment plants (WWTPs), not specifically designed for their removal, pose serious hazards to human health and ecosystems. Their impact is of particular relevance to wastewater disposal and re-use in agricultural settings due to CEC uptake and accumulation in food crops and consequent diffusion into the food-chain. This is the reason why the chemical CEC discussed in this review have been selected considering, besides recalcitrance, frequency of detection and entity of potential hazards, their relevance for crop uptake. Antibiotic-resistant bacteria (ARB) and antibiotic resistance genes (ARGs) have been included as microbial CEC because of the potential of secondary wastewater treatment to offer conditions favourable to the survival and proliferation of ARB, and dissemination of ARGs. Given the adverse effects of chemical and microbial CEC, their removal is being considered as an additional design criterion, which highlights the necessity of upgrading conventional WWTPs with more effective technologies. In this review, the performance of currently applied biological treatment methods for secondary treatment is analysed. To this end, technological solutions including conventional activated sludge (CAS), membrane bioreactors (MBRs), moving bed biofilm reactors (MBBRs), and nature-based solutions such as constructed wetlands (CWs) are compared for the achievable removal efficiencies of the selected CEC and their potential of acting as reservoirs of ARB&ARGs. With the aim of giving a picture of real systems, this review focuses on data from full-scale and pilot-scale plants treating real urban wastewater. To achieve an integrated assessment, technologies are compared considering also other relevant evaluation parameters such as investment and management costs, complexity of layout and management, present scale of application and need of a post-treatment. Comparison results allow the definition of design and operation strategies for the implementation of CEC removal in WWTPs, when agricultural reuse of effluents is planned.

Photodegradation of sulfamethoxazole in environmental samples: The role of pH, organic matter and salinity

Sulfamethoxazole (SMX) is the most representative antibiotic of the sulfonamides group used in both human and veterinary medicine, and thus frequently detected in water resources. This has caused special concern due to the pronounced toxicity and potential to foster bacterial resistance of this drug. Therefore, and to further understand the fate of SMX in the aquatic environment, its photodegradation under simulated solar radiation was here studied in ultrapure water and in different environmental samples, namely estuarine water, freshwater and wastewater. SMX underwent very fast photodegradation in ultrapure water, presenting a half-life time (t_1/2) of 0.86 h. However, in environmental samples, the SMX photodegradation rate was much slower, with 5.4 h < t_1/2 < 7.8 h. The main novelty of this work was to prove that pH, salinity and dissolved organic matter are determinant factors in the decrease of the SMX photodegradation rate observed in environmental samples and, thus, they will influence the SMX fate and persistence, potentially increasing the risks associated to the presence of this pollutant in the environment.

Preparation, characterization, and application of macroporous activated carbon (MAC) suitable for the BAC water treatment process

To address the sharp decrease in efficiency of the biological activated carbon (BAC) process at low temperatures, a new type of activated carbon (AC), macroporous activated carbon (MAC), was developed from bamboo waste scraps via a special compression, carbonation and activation process without the introduction of chemicals. MAC contains not only the micron-level macropores (V_maco > 0.71 ml/g) sufficient for bacteria to access and multiply, but ensures the developed smaller pores (particularly micropores, V_micro > 0.41 ml/g) and a higher hardness (>90%). In addition, the desired volume of macropores with an adiabatic function, which will provide livable space environment for bacteria, can be obtained by adjusting the compression ratio (1:5-1:10). Because of the maximum macropore volume (V_maco = 0.805 ml/g) and the most abundant macropore distribution (particularly diameters>10,000 nm), MAC (1:6) was selected for the parallel experiment in the laboratory, taking three representative commercial ACs (PICABIOL® 2, raw coal AC-1 and briquetting AC-2) as controls, in which the filtration effluent of a water treatment plant was used as the influent and glucose was added to accelerate bacterial growth. The results showed that MAC (1:6) exhibited the highest DOC removal and biological activity at room/low temperatures (4 °C), indicating that the abundant macropores distribution with adiabatic function in MAC (1:6) is conducive to the growth and breeding of microorganisms. It is equivalent to artificially increasing the surface suitable for bacteria attachment. This is coupled with the higher adsorption capacity for pollutants supplied by the developed micropores in MAC, which provided the substrate for bacteria growth, thus forming a benign circle for water treatment by the BAC process. The results provide significant technical support for BAC's application, particularly at cold temperatures.

A Review on the Synthesis and Characterization of Metal Organic Frameworks for Photocatalytic Water Purification

This review analyzes the preparation and characterization of metal organic frameworks (MOFs) and their application as photocatalysts for water purification. The study begins by highlighting the problem of water scarcity and the different solutions for purification, including photocatalysis with semiconductors, such as MOFs. It also describes the different methodologies that can be used for the synthesis of MOFs, paying attention to the purification and activation steps. The characterization of MOFs and the different approaches that can be followed to learn the photocatalytic processes are also detailed. Finally, the work reviews literature focused on the degradation of contaminants from water using MOF-based photocatalysts under light irradiation.

Veterinary pharmaceutical residues from natural water to tap water: Sales, occurrence and fate

Veterinary pharmaceuticals (VPs) increasingly used in animal husbandry have led to their presence in aquatic environments -surface water (SW) or groundwater (GW) - and even in tap water. This review focuses on studies from 2007 to 2017. Sixty-eight different veterinary pharmaceutical residues (VPRs) have been quantified worldwide in natural waters at concentrations ranging from nanograms per liter (ng L^-1) to several micrograms per liter (μg L^-1). An extensive up-to-date on sales and tonnages of VPs worldwide has been performed. Tetracyclines (TCs) antibiotics are the most sold veterinary pharmaceuticals worldwide. An overview of VPRs degradation pathways in natural waters is provided. VPRs can be degraded or transformed by biodegradation, hydrolysis or photolysis. Photo-degradation appears to be the major degradation pathway in SW. This review then reports occurrences of VPRs found in tap water, and presents data on VPRs removal in drinking water treatment plants (DWTPs) at each step of the process. VPRs have been quantified in tap water at ng L^-1 concentration levels in four studies of the eleven studies dealing with VPRs occurrence in tap water. Overall removals of VPRs in DWTPs generally exceed 90% and advanced treatment processes (oxidation processes, adsorption on activated carbon, membrane filtration) greatly contribute to these removals. However, studies performed on full-scale DWTPs are scarce. A large majority of fate studies in DWTPs have been conducted under laboratory at environmentally irrelevant conditions (high concentration of VPRs (mg L^-1), use of deionized water instead of natural water, high concentration of oxidant, high contact time etc.). Also, studies on VPRs occurrence and fate in tap water focus on antibiotics. There is a scientific gap on the occurrence and fate of antiparatic drugs in tap waters.

Biocatalytic Degradation of Parabens Mediated by Cell Surface Displayed Cutinase

Parabens are emerging environmental contaminants with known endocrine-disrupting effects. This study created a novel biocatalyst (named as SDFsC) by expressing the enzyme Fusarium solani pisi cutinase (FsC) on the cell surface of Baker's yeast Sacchromycese cerevisiae and demonstrated successful enzyme-mediated removal of parabens for the first time. Parabens with different side chain structures had different degradation rates by the SDFsC. The SDFsC preferentially degraded the parabens with relatively long alkyl or aromatic side chains. The structure-dependent degradability was in a good agreement with the binding energy between the active site of FsC and different parabens. In real wastewater effluent solution, the SDFsC effectively degraded 800 μg/L of propylparaben, butylparaben, and benzylparaben, either as a single compound or as a mixture, within 48 h. The estrogenic activity of parabens was considerably reduced as the parent parabens were degraded into 4-hydroxybenzoic acid via hydrolysis pathway by the SDFsC. The SDFsC showed superior reusability and maintained 93% of its initial catalytic activity after six rounds of paraben degradation reaction. Results from this study provide scientific basis for developing biocatalysis as a green chemistry alternative for advanced treatment of parabens in sustainable water reclamation.

Photocatalytic degradation of ibuprofen in water using TiO2/UV and g-C3N4/visible light: Study of intermediate degradation products by liquid chromatography coupled to high-resolution mass spectrometry

The photocatalytic degradation of ibuprofen with TiO₂ nanoparticles (NPs) and UV light and with graphitic carbon nitride (g-C₃N₄) 2D nanosheets and visible light are proposed and compared as advanced oxidation treatments for the removal of ibuprofen in water. By-products formed with both photocatalytic systems have been tentatively identified based on the results of ultra-high-performance liquid chromatography coupled to high-resolution mass spectrometry, using a quadrupole-time of flight mass spectrometer in positive and negative ionization modes, which allowed to obtain the elementary composition of their precursors and fragment ions. The removal of ibuprofen and the by-product formation were studied at three pH values. Ibuprofen depletion followed pseudo fist-order kinetics with rate constants of 0.04, 1.0 and 0.0006 min^-1 at pH 2.50, 5.05 and 12.04 for TiO₂/UV and 0.03, 0.007 and 0.0005 min^-1 at pH 2.51, 5.05 and 11.33 for g-C₃N₄/vis, respectively. Around eighteen by-products have been detected with slight differences between the two photocatalytic systems studied. The evolution of the main common by-products (tentatively identified as 1-(4-ethylphenyl)-2-methylpropan-1-one, 1-(4-isobutylphenyl)ethan-1-ol, 1-(4-ethylphenyl)-2-methylpropan-1-ol and 1(-4-acetylphenyl)-2-methylpropan-1-one) were monitored and the results were consistent with reaction pathways based on hydroxyl radical attacks following/followed by decarboxylation. Moreover, some by-products have been reported for the first time in the photocatalytic oxidation of ibuprofen.

Health and ecological risk assessment of emerging contaminants (pharmaceuticals, personal care products, and artificial sweeteners) in surface and groundwater (drinking water) in the Ganges River Basin, India

Pharmaceuticals, personal care products (PPCPs), and artificial sweeteners (ASWs) are contaminants of emerging concern commonly found in the aquatic environments. In India, studies reporting environmental occurrence of these contaminants are scarce. In this study, we investigated the occurrence and distribution of 15 PPCPs and five ASWs in the river and groundwater (used untreated as drinking water) at several sites along the Ganges River. Based on the measured groundwater concentrations, we estimated the life-long human health risk from exposure to PPCPs through drinking. In addition, we estimated the risk of exposure to PPCPs and ASWs in the river water for aquatic organisms. The sum of detected PPCPs in the river water ranged between 54.7-826 ng/L, with higher concentrations in the severely anthropogenically influenced middle and lower reaches of the Ganges. The highest concentration among the PPCPs in the river water was of caffeine (743 ng/L). The sum of detected ASWs in river water ranged between 0.2-102 ng/L. Similar to PPCPs, the sum of ASWs in the river water was higher in the middle and lower reaches of the Ganges. In groundwater, the sum of detected PPCPs ranged between 34-293 ng/L, whereas of ASWs ranged between 0.5-25 ng/L. Negligible risk for humans was estimated from PPCPs in the drinking groundwater sources along the Ganges River, whereas moderate risks to PPCPs and ASWs (namely: caffeine, sulfamethoxazole, triclocarban, triclosan, and sucralose) were estimated for aquatic organisms in the Ganges River.

Sorption behaviors of antimicrobial and antiparasitic veterinary drugs on subtropical soils

Brazil is one of the world's largest producers of animal protein, requiring the large-scale use of veterinary drugs. The administration of antimicrobials and antiparasitics is a common practice. However, there is a lack of information on how these drugs impact the environment. Antimicrobials are capable of altering the soil microbial population and are responsible for the development of multidrug-resistant microbial strains. Therefore, it is important to evaluate the fate and transport of these compounds in the environment, and one parameter used for this purpose is the soil-water partition coefficient. In this work, an assessment was made of the soil sorption behaviors of 18 drugs from seven different families, including antimicrobials (sulfonamides, fluoroquinolones, amphenicols, and macrolides) and antiparasitic drugs (milbemycin, avermectins, and benzimidazoles). Seven subtropical soils of different textural classes were tested. The Freundlich sorption coefficients, expressed as μg^1-1/n (cm³)^1/n g^-1, were in the following ranges: 0.45 to 19 (sulfonamides), 72 to 2410 (fluoroquinolones), 9 to 58 (thiabendazole), 0.03 to 0.48 (florfenicol), 105 to 424 (moxidectin), 14 to 184 (avermectins), and 1.5 to 74 (macrolides). The results showed that the drugs belonging to the same family, with chemical structures in common, presented similar behaviors regarding sorption and desorption, for the different soils tested and are generally in agreement with soils from temperate regions. The data set obtained in this work give an overview of the fate of the veterinary drugs in Brazilian subtropical soils with different textures and composition and can be very helpful for exposure risk assessments.

Chemically and thermally activated persulfate for theophylline degradation and application to pharmaceutical factory effluent

Degradation of PPCPs by AOPs has gained major interest in the past decade. In this work, theophylline (TP) oxidation was studied in thermally (TAP) and chemically (CAP) activated persulfate systems, separately and in combination (TCAP). For [TP]₀ = 10 mg L⁻¹, (i) TAP resulted in 60% TP degradation at [PS]₀ = 5 mM and T = 60 °C after 60 min of reaction and (ii) CAP showed slight degradation at room temperature; however, (iii) TCAP resulted in complete TP degradation for [PS]₀ = [Fe²⁺]₀ = 2 mM at T = 60 °C following a pseudo-first order reaction rate with calculated k_obs = 5.6 (±0.4) × 10⁻² min⁻¹. In the TCAP system, the [PS]₀ : [Fe²⁺]₀ ratio of 1 : 1 presented the best results. A positive correlation was obtained between the TP degradation rate and increasing temperature and [PS]₀, and a negative correlation was obtained with increasing pH. Both chloride and humic acid inhibited the degradation process, while nitrates enhanced it. TP dissolved in spring, sea and waste water simulating real effluents showed lower degradation rates than in DI water. Waste water caused the highest inhibition (k_obs = 2.6 (±0.6) × 10⁻⁴ min⁻¹). Finally, the TCAP system was tested on a real factory effluent highly charged with TP, e.g. [TP]₀ = 160 mg L⁻¹, with successful degradation under the conditions of 60 °C and [PS]₀ = [Fe²⁺]₀ = 50 mM.

Chemically activated persulfate in heated medium showed synergistic effect toward full degradation of theophylline in industrial factory effluents. This makes such AOP a well-adapted technology to treat highly concentrated hazardous pharmaceuticals.