Chemical Properties, Structural Properties, and Energy Storage Applications of Prussian Blue Analogues

Synergistic Modification of Fe-Based Prussian Blue Cathode Material Based on Structural Regulation and Surface Engineering

The Fe-based Prussian blue (Fe-PB) composite is considered as one of the most potential cathode materials for sodium-ion batteries because of its abundant iron resources and high theoretical capacity. However, the crystal water and vacancy in the Fe-PB structure will lead to poor capacity and cycle stability. In this work, a Cu-modified Fe-PB composite (FeCu-PB@CuO) is successfully prepared through regulating the Fe-PB structure by Cu doping and engineering the surface by CuO coating. The density functional theory calculation results confirm that Cu preferentially replaces Fe^HS in the Fe-PB lattice and Cu doping reduces the bandgap. Our experiment results reveal that CuO coating can provide more active sites, inhibit side reactions, and potentially enhance the activity of Fe^HS. Due to the synergistic effect of Cu doping and CuO coating, FeCu-PB@CuO has a considerable initial discharge capacity of 123.5 mAh g^-1 at 0.1 A g^-1. In particular, at 2 A g^-1, it delivers an impressive initial capacity of 84.3 mAh g^-1, and the capacity decreasing rate of each cycle is only 0.02% over 1500 cycles. Therefore, the synergistic modification strategy of metal ion doping and metal oxide coating has tremendous application potential and can be extended to other electrode materials.

Ni-Containing Electrolytes for Superior Zinc-Ion Aqueous Batteries with Zinc Hexacyanoferrate Cathodes

A one-step coprecipitation process is designed to synthesize zinc hexacyanoferrate (ZnHCF) cathodes in aqueous zinc-ion batteries (ZIBs). The morphology of the cathode is influenced by the concentration of the precursor solution and valence of iron ions. The rhombohedral ZnHCF sample exhibits high crystallinity on the microscale in the cut-angle cubic structure, whereas Na-rich NaZnHCF contains many interstitial water molecules in the rhombic nanoplates. Both samples show effective insertion of Zn ions in the aqueous ZnSO4 solution. ZnHCF shows a specific capacity of 66.7 mA h g-1, a redox voltage of 1.73 V, and fast decline in a few cycles. On the other hand, NaZnHCF has a lower specific capacity of 48.2 mA h g-1, showing two voltage platforms and robust cycling stability. However, owing to serious side reactions, both samples have low Columbic efficiency. To improve the properties such as Coulombic efficiency, specific capacity, and cycling stability, Ni ions are introduced by adding 10 wt % NiSO4 to the ZnSO4 electrolyte. The ZnHCF cathode in the Ni-containing electrolyte has the best properties such as a high specific capacity of 71.2 mA h g-1 at a current density of 100 mA g-1, 93% retention of the Coulombic efficiency, and a good rate performance manifested by a reversible capacity of 58.2 mA h g-1 at 1 A g-1. The results reveal a strategy to improve the electrochemical properties of aqueous ZIBs by modifying the electrolytes.

Solid-solution reaction suppresses the Jahn-Teller effect of potassium manganese hexacyanoferrate in potassium-ion batteries

Potassium manganese hexacyanoferrate (KMnHCF) suffers from poor cycling stability in potassium-ion batteries due to the Jahn-Teller effect, and experiences destabilizing asymmetric expansions and contractions during cycling. Herein, hollow nanospheres consisting of ultrasmall KMnHCF nanocube subunits (KMnHCF-S) are developed by a facile strategy. In situ XRD analysis demonstrates that the traditional phase transition for KMnHCF is replaced by a single-phase solid-solution reaction for KMnHCF-S, which effectively suppresses the Jahn-Teller effect. From DFT calculations, it was found that the calculated reaction energy for K+ extraction in the solid-solution reaction is much lower than that in the phase transition, indicating easier K+ extraction during the solid-solution reaction. KMnHCF-S delivers high capacity, outstanding rate capability, and superior cycling performance. Impressively, the K-ion full cell composed of the KMnHCF-S cathode and graphite anode also displays excellent cycling stability. The solid-solution reaction not only suppresses the Jahn-Teller effect of KMnHCF-S but also provides a strategy to enhance the electrochemical performance of other electrodes which undergo phase transitions.

Incorporating Near-Pseudocapacitance Insertion Ni/Co-Based Hexacyanoferrate and Low-Cost Metallic Zn for Aqueous K-Ion Batteries

The limited availability of cathode materials with high specific capacity and significant cycling stability for aqueous K-ion batteries (AKIBs) hinder their further development owing to the large radius of K⁺ (1.38 Å). Prussian blue and its analogs with a three-dimensional frame structure possessing special energy storage mechanism are promising candidates as cathode materials for AKIBs. In this study, K_0.2 Ni_0.68 Co_0.77 Fe(CN)₆  ⋅ 1.8H₂ O (KNCHCF) was prepared as a cathode material for AKIBs. Both the electrochemical activity of Co ions and the near-pseudocapacitance intercalation of KNCHCF enhance K⁺ storage. Therefore, KNCHCF exhibits a superior capacity maintenance rate of 86 % after 1000 cycles at a high current density of 3.0 A g^-1 . The storage mechanism of K⁺ in AKIBs was revealed through ex situ X-ray diffraction, ex situ Fourier transform infrared spectroscopy, and ex situ X-ray photoelectron spectroscopy measurements. Moreover, the assembled K-Zn hybrid battery showed good cycling stability with 93.1 % capacity maintenance at 0.1 A g^-1 after 50 cycles and a high energy density of 96.81 W h kg^-1 . Hence, KNCHCF may be a potential material for the development of AKIBs.

Na1.51 Fe[Fe(CN)6 ]0.87 ·1.83H2 O Hollow Nanospheres via Non-Aqueous Ball-Milling Route to Achieve High Initial Coulombic Efficiency and High Rate Capability in Sodium-Ion Batteries

Prussian blue analogues (PBAs) have attracted extensive attention as cathode materials in sodium-ion batteries (SIBs) due to their low cost, high theoretical capacity, and facile synthesis process. However, it is of great challenge to control the crystal vacancies and interstitial water formed during the aqueous co-precipitation method, which are also the key factors in determining the electrochemical performance. Herein, an antioxidant and chelating agent co-assisted non-aqueous ball-milling method to generate highly-crystallized Na_{2- x} Fe[Fe(CN)₆ ]_y with hollow structure is proposed by suppressing the speed and space of crystal growth. The as-prepared Na_{2- x} Fe[Fe(CN)₆ ]_y hollow nanospheres show low vacancies and interstitial water content, leading to a high sodium content. As a result, the Na-rich Na_1.51 Fe[Fe(CN)₆ ]_0.87 ·1.83H₂ O hollow nanospheres exhibit a high initial Coulombic efficiency, excellent cycling stability, and rate performance via a highly reversible two-phase transition reaction confirmed by in situ X-ray diffraction. It delivers a specific capacity of 124.2 mAh g^-1 at 17 mA g^-1 , presenting ultra-high rate capability (84.1 mAh g^-1 at 3400 mA g^-1 ) and cycling stability (65.3% capacity retention after 1000 cycles at 170 mA g^-1 ). Furthermore, the as-reported non-aqueous ball-milling method could be regarded as a promising method for the scalable production of PBAs as cathode materials for high-performance SIBs.

Enhancement of the Catalytic Activity of Double Metal Cyanides for the Oxidation of Styrene by the Presence of Included Alcohols

In recent years, people have focused on the development of simple and efficient heterogeneous catalysts for the styrene epoxidation reaction. In this work, a FeCo double metal cyanide (DMC) was modified with C1 to C6 linear alcohols, and the prepared materials were used to catalyze the reaction of styrene epoxidation in various solvents. It is noteworthy that the styrene conversion is mainly affected by modification with alcohols, while the selectivity in styrene oxide (SO) is obviously influenced by the solvent. FeCo DMC along with MeOH exhibits the best catalytic performance, with a conversion rate of 96% and a SO selectivity of 86%, in N,N-dimethylformamide (DMF) solvent. Various physical and chemical methods were used to analyze the structures and compositions of the materials. To clarify the mechanism of the improvement, we set up an original approach to investigate the kinetics of the adsorption process between the oxidant and the catalyst, using isothermal titration calorimetry (ITC). The obtained results illustrate that the adsorption process of the oxidant on the surface of FeCo DMC can be dramatically promoted by the presence of MeOH. Such a difference in adsorption thus explains the significant improvement of its catalytic activity by modification with MeOH. This study thus provides a new fundamental understanding of DMC catalysts for the styrene epoxidation reaction.

Enhanced catalytic reduction of p-nitrophenol and azo dyes on copper hexacyanoferrate nanospheres decorated copper foams

Catalytic reduction of nitroaromatic compounds using low-cost non-precious metal containing catalyst remains an essential topic in wastewater treatment. Herein, copper hexacyanoferrate nanospheres decorated copper foams (CF) were prepared by a facile method, and it was used as structured catalysts for the reduction of p-nitrophenol (p-NP) and azo dyes. The catalyst obtained by calcination at 200 °C shows the highest catalytic activity, with an almost complete reduction of p-NP within 3 min with a rate of 2.057 min^-1 at room temperature, and it exhibited excellent reusability in successive 6 cycles. The effects of temperature, initial concentration, pH, and flow rate on p-NP reduction were investigated. Moreover, the mechanistic investigation revealed that fast electron transfer ability and enhanced adsorption for p-NP contributed to its enhanced catalytic performances. This work put forward an efficient approach for the construction of structured catalysts with enhanced performance in catalytic reduction applications.

Different Agglomeration Processes Induced by the Varied Interaction of Fe-Fe Analogues with Differently Charged Surfactants

The catalytic activity of Prussian blue analogues (PBAs) is mainly tuned via the control of material sizes and morphologies. However, the shapes and sizes of many PBAs are difficult to control. In this work, a facile approach is demonstrated using differently charged surfactants to tune the catalytic activity of PBAs. Fe-Fe PBAs prepared with non-ionic P123, cationic cetyltrimethylammonium bromide, and anionic sodium dodecyl sulfate are chosen to study the effect of surfactant charges on the catalytic activity. The transesterification of propylene carbonate to dimethyl carbonate by methanol is selected as a model reaction. Owing to the different agglomeration processes of PB particles after modified with differently charged surfactants, significantly varied shapes and sizes were observed. Accordingly, the catalytic activity is greatly varied by adding surfactants. The different catalytic activities may arise from the different behaviors of agglomeration of PB particles after surfactant modification as well as the material size and shape changes. Besides, apparent activation energies for PBs adding different surfactants were derived. Finally, the agglomeration mechanism of PB particles in the presence of differently charged surfactants was proposed.

Thermodynamic and Kinetic Analyses of Ion Intercalation/Deintercalation Using Different Temperatures on NiHCF Electrodes for Battery Electrode Deionization

Prussian blue analogues are used in electrochemical deionization due to their cation sorption capabilities and ion selectivity properties. Elucidating the fundamental mechanisms underlying intercalation/deintercalation is important for the development of ion-selective electrodes. We examined the thermodynamic and kinetic properties of nickel hexacyanoferrate electrodes by studying different temperatures effects on intercalation/deintercalation with monovalent ions (Li⁺, Na⁺, K⁺, and NH₄⁺) relevant to battery electrode deionization applications. Higher temperatures reduced the interfacial charge transfer resistance and increased the diffusion coefficient of cations in the solid material. Ion transport in the solid material, rather than interfacial charge transfer, was found to be the rate-controlling step, as shown by higher activation energies for ion transport (e.g., 31 ± 3 kJ/mol for K⁺) than for interfacial charge transfer (5 ± 1 kJ/mol for K⁺). The largest increase in cation adsorption capacity with temperature was observed for NH₄⁺ (28.1% from 15 to 75 °C) due to its smallest activation energy. These results indicate that ion hydration energy determines the intercalation potential and activation energies of ion transport in solid material control intercalation/deintercalation rate. Together with the endothermic behavior of deintercalation and exothermic behavior of intercalation, the higher operating temperature results in improvement of ion adsorption capacity depending on specific cations.

Monoclinic Bimetallic Prussian Blue Analog Cathode with High Capacity and Long Life for Advanced Sodium Storage

Prussian blue analogs (PBAs) are regarded as promising cathode materials for sodium-ion batteries (SIBs), but most of them suffer from an incompatibility between capacity and structural stability. Herein, an innovative disodium ethylenediaminetetraacetate (Na₂EDTA)-assisted hydrothermal method is proposed to synthesize monoclinic Fe-substituted Ni-rich PBA (H-PBA) cathodes for Na-ion storage. The as-designed H-PBA cathode combines the merits of the low strain of a Ni-based PBA framework and the enhanced capacity of N-Fe³⁺/Fe²⁺ redox sites. It can achieve superior sodium-storage performance in terms of capacity, rate capability, and cycle stability. Moreover, ex situ measurements reveal that solid solution (2.0-3.0 V) and phase-transition (3.0-4.0 V) reactions occur during the charge/discharge process to allow almost 1.5 Na⁺ storage in the H-PBA lattice. Meanwhile, the H-PBA//NaTi₂(PO₄)₃@C full cell also delivers remarkable electrochemical properties. Prospectively, this work would promote the practical application of SIBs in grid-scale electric energy storage.

Metal-Organic Framework-Based Materials for Aqueous Zinc-Ion Batteries: Energy Storage Mechanism and Function

Aqueous rechargeable zinc-ion batteries (ZIBs) featuring competitive performance, low cost and high safety hold great promise for applications in grid-scale energy storage and portable electronic devices. Metal-organic frameworks (MOFs), relying on their large framework structure and abundant active sites, have been identified as promising materials in ZIBs. This review comprehensively presents the current development of MOF-based materials including MOFs and their derivatives in ZIBs, which begins with Zn storage mechanism of MOFs, followed by introduction of various types of MOF-based cathode materials (PB and PBA, Mn-based MOF, V-based MOF, conductive MOF and their derivatives), and the regulation approaches for Zn deposition behavior. The key factors and optimization strategies of MOF-based materials that affect ZIBs performance are emphasized and discussed. Finally, the challenges and further research directions of MOF-based materials for advanced zinc-ion batteries are provided.

Well-defined bimetal oxides derived from Prussian blue analogues with regulable active sites for phosphate removal

Two well-defined CoFe bimetal oxides are prepared from Prussian blue analogues (PBAs) as precursors with designable structures, which are further explored for phosphate removal. A speed-controlled coordination strategy is used to fabricate two CoFe PBA microcrystals with different morphologies, then two regular CoFe oxides are obtained via an intermediate-temperature calcination. CoFeS, a slow-speed coordination product with truncated microcube structure, contains less coordinated water and Fe³⁺ in its framework, but can create more mesopores and Fe³⁺ in its oxidative product of CoFeST300. CoFeST300 has been demonstrated to have higher adsorption capacity and affinity for phosphate adsorption compared to that of the fast-speed coordination product, due to its more Fe³⁺ as effective adsorption sites via ligand exchange. Besides, the inner-sphere complexation mechanism makes CoFeST300 high selectivity for phosphate removal compared to other co-existing anions. The application performance of CoFeST300 is examined by multiple continuous treatment of actual sewage, and the result of all effluent concentrations below 0.5 mg P/L verifies a promising potential of the fabricated adsorbent for phosphorus removal. Thus, design or regulation of the precursors is an efficiency method to fabricate an ideal metal oxide for phosphate adsorption.

Cs sorption of Mn-Fe based Prussian blue analogs with periodic precipitation banding in agarose gel

We report the understanding of Cs sorption/desorption properties of Mn-Fe based Prussian blue analogs (Mn-Fe PBA) and Prussian blue (PB) in agarose gel via X-ray fluorescence spectroscopy and scanning electron microscopy. After contacting a 2 mass% agarose gel containing 100 mmol dm^-3 [Fe(CN)₆]^3- ions (inner electrolyte gel) with a 1 mass% agarose gel containing 550 mmol dm^-3 Mn²⁺ or Fe²⁺ ions (outer electrolyte gel) in a plastic straw for 11 days, the clipped 10 mm-long gel columns of uniformly formed precipitates (named "Mn-Fe PBA gel" and "PB gel") were used to investigate their Cs sorption/desorption properties. The Mn-Fe PBA gel showed several interesting features that were not observed in the PB gel. The Cs sorption capacity of the Mn-Fe PBA gel increased over time, and after ∼1200 h reached a value comparable to the most optimal values previously reported. During Cs sorption, Mn²⁺ ions were constantly released from the Mn-Fe PBA gel, and several periodic precipitation bands were generated. The positions of the periodic bands agreed with those of the peak distributions of Cs, Mn, and Fe, suggesting that the concentration fluctuation of Mn^II-Fe^III PBA in the gel resulted in the periodic band formation. In these bands, large crystallites (>10 μm) were dominant, suggesting the contribution of Ostwald ripening. During Cs desorption, while Mn²⁺ ions were released from the Mn-Fe PBA gel, the release of Cs⁺ ions was considerably suppressed (∼1/3 for the PB gel). Based on these results, a model for Cs sorption by the Mn-Fe PBA gel was proposed, and its potential applications were discussed.

Prussian Blue Analogues for Sodium-Ion Batteries: Past, Present, and Future

Prussian blue analogues (PBAs) have attracted wide attention for their application in the energy storage and conversion field due to their low cost, facile synthesis, and appreciable electrochemical performance. At the present stage, most research on PBAs is focused on their material-level optimization, whereas their properties in practical battery systems are seldom considered. This review aims to first provide an overview of the history and parameters of PBA materials and analyze the fundamental principles toward rational design of PBAs, and then evaluate the prospects and challenges for PBAs for practical sodium-ion batteries, hoping to bridge the gap between laboratory research and commercial reality.

Application of a conversion electrode based on decomposition derivatives of Ag4[Fe(CN)6] for aqueous electrolyte batteries

The lack of stable electrode materials for water-based electrolytes due to the intercalation and conversion reaction mechanisms encourage scientists to design new or renovate existing materials with better cyclability, capacity, and cost-effectiveness. Ag4[Fe(CN)6] is a material belonging to the Prussian blue family that can be used, as its other family members, as an electrode material with the intercalation/deintercalation reaction or conversion-type mechanism through Ag oxidation/reduction. However, due to the instability of this material in its dry state, it decomposes to AgCN and a Prussian blue residual complex. A possible reason for Ag4[Fe(CN)6] decomposition is discussed. Nevertheless, it is shown that the decomposition products of Ag4[Fe(CN)6] have electrochemical activity due to the reversible oxidation/reduction of Ag atoms in water-based electrolytes.

Fast Ionic Storage in Aqueous Rechargeable Batteries: From Fundamentals to Applications

The highly dynamic nature of grid-scale energy systems necessitates fast kinetics in energy storage and conversion systems. Rechargeable aqueous batteries are a promising energy-storage solution for renewable-energy grids as the ionic diffusivity in aqueous electrolytes can be up to 1-2 orders of magnitude higher than in organic systems, in addition to being highly safe and low cost. Recent research in this regard has focussed on developing suitable electrode materials for fast ionic storage in aqueous electrolytes. In this review, breakthroughs in the field of fast ionic storage in aqueous battery materials, and 1D/2D/3D and over-3D-tunnel materials are summarized, and tunnels in over-3D materials are not oriented in any direction in particular. Various materials with different tunnel sizes are developed to be suitable for the different ionic radii of Li⁺ , Na⁺ , K⁺ , H⁺ , NH₄ ⁺ , and Zn²⁺ , which show significant differences in the reaction kinetics of ionic storage. New topochemical paths for ion insertion/extraction, which provide superfast ionic storage, are also discussed.

High-Performance Fe-Based Prussian Blue Cathode Material for Enhancing the Activity of Low-Spin Fe by Cu Doping

Iron-based Prussian blue (FeHCF) has great application potential in the large-scale production of sodium-ion (Na⁺) batteries because of its high theoretical capacity and abundant Fe ore resources. However, the Fe(CN)₆ vacancies and crystal water seriously affect the electrochemical performance. Herein, a Cu-doped FeHCF (Cu-FeHCF) cathode material is successfully prepared directly by a coprecipitation method. After Cu doping, the monoclinic structure and the quasi-cubic morphology are retained, but the electrochemical performance is significantly improved. In addition to few Fe(CN)₆ vacancies and low crystal water, the improved performance is also related to the enhanced electrochemical activity of low-spin Fe and the stabilizing effect of Cu on the crystal structure. Moreover, Cu doping also controls the side reaction to a certain extent. As a result, after Cu doping, the initial discharge capacity is enhanced from 107.9 to 127.4 mA h g^-1 at 100 mA g^-1, especially the capacities contributed by low-spin Fe increase from 30.0, 21.7, and 16.7 mA h g^-1 to 48.8, 45.4, and 43.7 mA h g^-1 for the first three cycles, respectively. Even at 2 A g^-1, Cu-FeHCF still has a promising initial capacity of 82.3 mA h g^-1 and only a 0.047% capacity decay rate for each cycle over 500 cycles. Therefore, Cu-FeHCF shows excellent application potential in the field of Na⁺ energy storage batteries.

Single-walled carbon nanotubes as a reducing agent for the synthesis of a Prussian blue-based composite: a quartz crystal microbalance study

We investigated the synthesis mechanism of Prussian blue (PB) crystals supported on single-walled carbon nanotubes (SWCNTs), by performing in situ quartz crystal microbalance (QCM) measurements to probe the change in the electrode mass during the reaction, and using photoirradiation at designated stages of the process. We found that in contrast to existing hypotheses, light irradiation played no role in the synthesis process of Prussian blue on SWCNTs. On the other hand, the number of electrons transferred per one mole of the obtained product, and the number of electrons transferrable from SWCNTs, calculated from the density of states (DOS) of the SWCNTs in the sample, both favor the hypothesis of the reaction being triggered by direct electron transfer from SWCNTs to Fe³⁺, which occurs because of the energy difference between the Fermi level of SWCNTs and redox potential of Fe³⁺ ions.

Dimensionally Stable Polyimide Frameworks Enabling Long-Life Electrochemical Alkali-Ion Storage

Organic electrode materials hold unique advantages for electrochemical alkali-ion storage but cannot yet fulfill their potential. The key lies in the design of structurally stable candidates that have negligible solution solubility and can withstand thousands of cycles under operation. To this end, we demonstrate here the preparation of dimensionally stable polyimide frameworks from the two-dimensional cross-linking of tetraaminobenzene and dianhydride. The product consists of hierarchically assembled nanosheets with thin thickness and abundant porosity. Its robust molecular frameworks and advantageous nanoscale features render our polymeric material a promising cathode candidate for both sodium-ion and potassium-ion batteries. Most strikingly, an extraordinary cycle life of up to 6000 cycles at 2 A g^-1 is demonstrated, outperforming most of its competitors. Theoretical simulations support the great activity of our polymeric product for the electrochemical alkali-ion storage.

On-Demand Atomic Hydrogen Provision by Exposing Electron-Rich Cobalt Sites in an Open-Framework Structure toward Superior Electrocatalytic Nitrate Conversion to Dinitrogen

Electrocatalytic nitrate (NO₃^-) reduction to N₂ via atomic hydrogen (H*) is a promising approach for advanced water treatment. However, the reduction rate and N₂ selectivity are hindered by slow mass transfer and H* provision-utilization mismatch, respectively. Herein, we report an open-framework cathode bearing electron-rich Co sites with extraordinary H* provision performance, which was validated by electron spin resonance (ESR) and cyclic voltammetry (CV) tests. Benefiting from its abundant channels, NO₃^- has a greater opportunity to be efficiently transferred to the vicinity of the Co active sites. Owing to the enhanced mass transfer and on-demand H* provision, the nitrate removal efficiency and N₂ selectivity of the proposed cathode were 100 and 97.89%, respectively, superior to those of noble metal-based electrodes. In addition, in situ differential electrochemical mass spectrometry (DEMS) indicated that ultrafast *NO₂^- to *NO reduction and highly selective *NO to *N₂O or *N transformation played crucial roles during the NO₃^- reduction process. Moreover, the proposed electrochemical system can achieve remarkable N₂ selectivity without the additional Cl^- supply, thus avoiding the formation of chlorinated byproducts, which are usually observed in conventional electrochemical nitrate reduction processes. Environmentally, energy conservation and negligible byproduct release ensure its practicability for use in nitrate remediation.

Layered Double Hydroxide-Assisted Fabrication of Prussian Blue Membranes for Precise Molecular Sieving

Prussian Blue (PB), which was first discovered as robust blue-colored pigment in the year 1706, has shown promising prospects in disease treatment, energy conversion, water splitting, and sensing. Relying on the uniform 3.2 Å-sized pore channels as well as high stability in aqueous environments, in this study, we pioneered in situ preparation of polycrystalline PB membranes to justify their dye rejection and metal ion discrimination ability in aqueous environments. Among various factors, the introduction of calcined NiFe layered double hydroxide buffer layers on porous α-Al₂ O₃ substrates was found to play a paramount role in the formation of continuous polycrystalline PB membranes, thereby leading to excellent dye rejection efficiency (>99.0 %). Moreover, prepared PB membranes enabled discriminating different monovalent metal ions (e.g., Li⁺ , Na⁺ , and K⁺ ) depending on their discrepancy in Stokes diameters, showing great promise for lithium extraction from smaller-sized metal ions.

Non-aqueous synthesis of high-quality Prussian blue analogues for Na-ion batteries

A microwave-assisted solvothermal (MW-ST) method was developed to synthesize high-quality Prussian blue analogues. The tuned NaFeHCF exhibits low water content as well as good thermal stability. It delivers a high...

Old Materials for New Functions: Recent Progress on Metal Cyanide Based Porous Materials

Cyanide is the simplest ligand with strong basicity to construct open frameworks including some of the oldest compounds reported in the history of coordination chemistry. Cyanide can form numerous cyanometallates with different transition metal ions showing diverse geometries. Rational design of robust extended networks is enabled by the strong bonding nature and high directionality of cyanide ligand. By virtue of a combination of cyanometallates and/or organic linkers, multifunctional framework materials can be targeted and readily synthesized for various applications, ranging from molecular adsorptions/separations to energy conversion and storage, and spin-crossover materials. External guest- and stimuli-responsive behaviors in cyanide-based materials are also highlighted for the development of the next-generation smart materials. In this review, an overview of the recent progress of cyanide-based multifunctional materials is presented to demonstrate the great potential of cyanide ligands in the development of modern coordination chemistry and material science.

Synthesis and Applications of Prussian Blue and Its Analogues as Electrochemical Sensors

Prussian blue (PB) and its analogue (PBA) are a kind of representative cyanide-based coordination polymer. They have received enormous research interest and have shown promising applications in the electrochemical sensing field due to their excellent electrochemical activity and unique structural characteristics including open framework structure, high specific surface area, and adjustable metal active sites. In this review, we summarize the latest research progress of PB/PBA as an electrochemical sensor in detail from three aspects: fabrication strategy, synthesis method and electrochemical sensor application. For the fabrication strategy, we discussed different fabrication methods containing the combination of PBA and carbon materials, metal nanoparticles, polymers, etc., respectively, as well as their corresponding sensing mechanism for improving performance. We also presented the synthesis methods of PB/PBA materials in detail, such as: coprecipitation, hydrothermal and electrodeposition. In addition, the effects of different methods on the morphology, particle size and productivity of PB/PBA materials are also concluded. For the application of electrochemical sensors, the latest progress of such materials as electrochemical sensors for glucose, H2O2, toxic compounds, and biomolecules have been summarized. Finally, we conclude remaining challenges of PB/PBA-based materials as electrochemical sensors, and provide personal perspectives for future research in this field.

Porous Hexacyanometallate(III) Complexes as Catalysts in the Ring-Opening Copolymerization of CO2 and Propylene Oxide

In this work, six porous hexacyanometallate complexes (Ni3[Co(CN)6]2, Co3[Co(CN)6]2, Fe3[Co(CN)6]2, Ni3[Fe(CN)6]2, Co3[Fe(CN)6]2, Fe4[Fe(CN)6]2) were synthesized by a complexing agent assisted coprecipitation method and thoroughly characterized via X-ray diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), thermogravimetric analysis (TGA), in situ high-temperature X-ray diffraction (HT-XRD), elemental analysis (EA), X-ray fluorescence (XRF), scanning electron microscopy (SEM), transmission electron microscopy (TEM), N2 physisorption, and gas–solid phase titration with NH3. The thermal stability, chemical composition, pore size and volume, crystallite size and density of surface acid sites were strongly sensitive to both the transition metal and the cyanometallate anion employed. On that basis, transition metal hexacyanometallates must be perceived as an adaptable class of zeolite-like microporous materials. The catalytic properties of these compounds were tested by copolymerization of propylene oxide and CO2, a green route to obtain biodegradable aliphatic polycarbonates. All compounds under study showed moderate activity in the target reaction. The obtained copolymers were characterized by modest CO2 content (carbonate units ranging from 16 to 33%), random structure (RPEC ≈ 70%), and moderate molecular weight (Mw = 6000–85,400 g/mol) with broad dispersity values (ĐM = 4.1–15.8).

Binders for sodium-ion batteries: progress, challenges and strategies

Binders as a bridge in electrodes can bring various components together thus guaranteeing the integrity of electrodes and electronic contact during battery cycling. In this review, we summarize the recent progress of traditional binders and novel binders in the different electrodes of SIBs. The challenges faced by binders in terms of bond strength, wettability, thermal stability, conductivity, cost, and environment are also discussed in details. Correspondingly, the designing principle and advanced strategies of future research on SIB binders are also provided. Moreover, a general conclusion and perspective on the development of binder design for SIBs in the future are presented.

Challenges and Strategies toward Cathode Materials for Rechargeable Potassium-Ion Batteries

With increasing demand for grid-scale energy storage, potassium-ion batteries (PIBs) have emerged as promising complements or alternatives to commercial lithium-ion batteries owing to the low cost, natural abundance of potassium resources, the low standard reduction potential of potassium, and fascinating K⁺ transport kinetics in the electrolyte. However, the low energy density and unstable cycle life of cathode materials hamper their practical application. Therefore, cathode materials with high capacities, high redox potentials, and good structural stability are required with the advancement toward next-generation PIBs. To this end, understanding the structure-dependent intercalation electrochemistry and recognizing the existing issues relating to cathode materials are indispensable prerequisites. This review summarizes the recent advances of PIB cathode materials, including metal hexacyanometalates, layered metal oxides, polyanionic frameworks, and organic compounds, with an emphasis on the structural advantages of the K⁺ intercalation reaction. Moreover, major current challenges with corresponding strategies for each category of cathode materials are highlighted. Finally, future research directions and perspectives are presented to accelerate the development of PIBs and facilitate commercial applications. It is believed that this review will provide practical guidance for researchers engaged in developing next-generation advanced PIB cathode materials.

Advances in Understanding the Electrocatalytic Reconstruction Chemistry of Coordination Compounds

Coordination compounds including mainstream metal-organic frameworks and Prussian blue analogues receive extensive researches when they directly serve as electrocatalysts. Their reconstruction phenomena, that are closely associated with actual contributions and intrinsic catalytic mechanisms, are expected to be well summarized. Here, the recent advances in understanding reconstruction chemistry of coordination compounds are reviewed, including their main classifications and structural properties, reconstruction phenomena in electrocatalysis (e.g., oxygen/hydrogen evolution reaction, CO₂ reduction), influence factors of reconstruction parameters (e.g., reconstruction rate and reconstruction degree), and reconstruction-performance correlation. It is outlined that the reconstruction processes are influenced by electronic structure of coordination compounds, pH and temperature of testing solution, and applied potentials. The characterization techniques reflecting the evolution information before and after catalysis are also introduced for reconstruction-related mechanistic study. Finally, some challenges and outlooks on reconstruction investigations of coordination compounds are proposed, and the necessity of studying and understanding of these themes under actual working conditions of devices is highlighted.

Synthesis of truncated octahedral zinc-doped manganese hexacyanoferrates and low-temperature calcination activation for lithium-ion battery

Owing to their open three-dimensional framework structure, Prussian blue analogues (PBAs) have attracted increasing interest as anode materials for future lithium-ion batteries (LIBs). However, some disadvantages, such as inferior stability and short cycle life, hinder its utilization significantly. Hence, we develop a simple method to prepare a unique truncated octahedral ZnMnFe-PBA with exposed {111} crystal facets. The doping of Zn into Mn-based PBA enhances structural stability and improves the electronic conductivity. Meanwhile, low-temperature calcination not only improves the electrochemical activity but also preserves the porosity to enable mass transfer. When the ratio of Mn:Zn is 90:10 and the calcination temperature is 100 °C, sample Z10-100 displays high capacity and excellent cycle life (∼510.6 mA h g^-1 at 0.1 A g^-1, 168.9 mA h g^-1 after 5000 cycles at 1.0 A g^-1 with 99.9% capacity retention). The significant improvements in cycle stability and cycle life are attributable to transition metal ion doping and effective low-temperature calcination activation, which provide a facile approach for the synthesis of low-cost and efficient electrode materials.

Prussian Blue Analogues in Aqueous Batteries and Desalination Batteries

In the applications of large-scale energy storage, aqueous batteries are considered as rivals for organic batteries due to their environmentally friendly and low-cost nature. However, carrier ions always exhibit huge hydrated radius in aqueous electrolyte, which brings difficulty to find suitable host materials that can achieve highly reversible insertion and extraction of cations. Owing to open three-dimensional rigid framework and facile synthesis, Prussian blue analogues (PBAs) receive the most extensive attention among various host candidates in aqueous system. Herein, a comprehensive review on recent progresses of PBAs in aqueous batteries is presented. Based on the application in different aqueous systems, the relationship between electrochemical behaviors (redox potential, capacity, cycling stability and rate performance) and structural characteristics (preparation method, structure type, particle size, morphology, crystallinity, defect, metal atom in high-spin state and chemical composition) is analyzed and summarized thoroughly. It can be concluded that the required type of PBAs is different for various carrier ions. In particular, the desalination batteries worked with the same mechanism as aqueous batteries are also discussed in detail to introduce the application of PBAs in aqueous systems comprehensively. This report can help the readers to understand the relationship between physical/chemical characteristics and electrochemical properties for PBAs and find a way to fabricate high-performance PBAs in aqueous batteries and desalination batteries.

Comprehensive Understandings into Complete Reconstruction of Precatalysts: Synthesis, Applications, and Characterizations

Reconstruction induced by external environment (such as applied voltage bias and test electrolytes) changes catalyst component and catalytic behaviors. Investigations of complete reconstruction in energy conversion recently receive intensive attention, which promote the targeted design of top-performance materials with maximum component utilization and good stability. However, the advantages of complete reconstruction, its design strategies, and extensive applications have not achieved the profound understandings and summaries it deserves. Here, this review systematically summarizes several important advances in complete reconstruction for the first time, which includes 1) fundamental understandings of complete reconstruction, the characteristics and advantages of completely reconstructed catalysts, and their design principles, 2) types of reconstruction-involved precatalysts for oxygen evolution reaction catalysis in wide pH solution, and origins of limited reconstruction degree as well as design strategies/principles toward complete reconstruction, 3) complete reconstruction for novel material synthesis and other electrocatalysis fields, and 4) advanced in situ/operando or multiangle/level characterization techniques to capture the dynamic reconstruction processes and real catalytic contributors. Finally, the existing major challenges and unexplored/unsolved issues on studying the reconstruction chemistry are summarized, and an outlook for the further development of complete reconstruction is briefly proposed. This review will arouse the attention on complete reconstruction materials and their applications in diverse fields.

Cubic Manganese Potassium Hexacyanoferrate Regulated by Controlling of the Water and Defects as a High-Capacity and Stable Cathode Material for Rechargeable Aqueous Zinc-Ion Batteries

Aqueous zinc ion batteries (A-ZIBs) have been used as new alternative batteries for grid-scale electrochemical energy storage because of their low cost and environmental protection. Finding a suitable and economical cathode material, which is needed to achieve high energy density and long cycle stability, is one of the most important and arduous challenges at the present stage. Potassium manganese hexacyanoferrate (KMHCF) is a kind of Prussian blue analogue. It has the advantages of a large 3D frame structure that can accommodate the insertion/extraction of zinc ions, and is nontoxic, safe, and easy to prepare. However, regularly synthesized KMHCF has higher water and crystal defects, which reduce the possibility of zinc ions' insertion/extraction, and subsequently the discharge capacity and cycling stability. In this work, a KMHCF material with less water and low defects was obtained by adding polyvinylpyrrolidone during the synthesis process to control the reaction process. The KMHCF serves as the cathode of A-ZIBs and exhibits an excellent electrochemical performance providing a specific capacity of 140 mA h g^-1 for the initial cycle at a current density of 100 mA g^-1 (1 C). In particular, it can maintain a reversible capacity of 85 mA h g^-1, even after 400 cycles at 1 C. Moreover, unlike the traditional zinc storage mechanism of A-ZIBs, we found that the KMHCF electrode undergoes a phase transition process when the KMHCF electrode was activated by a small current density, which is attributed to part of the Mn on the lattice site being replaced by Zn, thus forming a new stable phase to participate in the subsequent electrochemical reaction.

Tuning of magnetic properties of the 2D CN-bridged NiII-NbIV framework by incorporation of guest cations of alkali and alkaline earth metals

The reaction between [Ni(cyclam)]2+ (cyclam = 1,4,8,11-tetraazacyclotetradecane) and [Nb(CN)8]4- in concentrated water solutions of different s-block metal salts leads to the formation of 2-dimensional honeycomb-like coordination networks of the formula Mx[Ni(cyclam)]3[Nb(CN)8]2·nH2O (x = 2: M = Li+, Na+; x = 1: M = Mg2+, Ca2+, Sr2+, Ba2+). The CN-bridged Ni-Nb coordination layers are intersected by channels filled with crystallisation water molecules and guest mono- or di-valent metal cations, which compensate the negative charge of the framework. The structural details and crystal symmetry vary between the networks, depending on the arrangement of the water molecules and the intermolecular interactions enforced by the guest cations. All compounds show long range magnetic order arising from superexchange interactions between paramagnetic NiII (s = 1) and NbIV (s = 1/2) centres through CN-bridges within the layers and weaker inter-layer interactions mediated by H-bonds. The ordering temperature as well as the coercive field of the magnetic hysteresis can be tuned by the type of guest cation, with the highest values achieved for Mg2+ and the lowest for Na+.

Metal-Organic Frameworks and Their Derivatives: Designing Principles and Advances toward Advanced Cathode Materials for Alkali Metal Ion Batteries

Metal-organic frameworks (MOFs) and their derivatives have attracted enormous attention in the field of energy storage, due to their high specific surface area, tunable structure, highly ordered pores, and uniform metal sites. Compared with the wide research of MOFs and their related materials on anode materials for alkali metal ion batteries, few works are on cathode materials. In this review, design principles for promoting the electrochemical performance of MOF-related materials in terms of component/structure design, composite fabrication, and morphology engineering are presented. By summarizing the advancement of MOFs and their derivatives, Prussian blue and its analogs, and MOF surface coating, challenges and opportunities for future outlooks of MOF-related cathode materials are discussed.

Rational Design and Engineering of One-Dimensional Hollow Nanostructures for Efficient Electrochemical Energy Storage

The unique structural characteristics of one-dimensional (1D) hollow nanostructures result in intriguing physicochemical properties and wide applications, especially for electrochemical energy storage applications. In this Minireview, we give an overview of recent developments in the rational design and engineering of various kinds of 1D hollow nanostructures with well-designed architectures, structural/compositional complexity, controllable morphologies, and enhanced electrochemical properties for different kinds of electrochemical energy storage applications (i.e. lithium-ion batteries, sodium-ion batteries, lithium-sulfur batteries, lithium-selenium sulfur batteries, lithium metal anodes, metal-air batteries, supercapacitors). We conclude with prospects on some critical challenges and possible future research directions in this field. It is anticipated that further innovative studies on the structural and compositional design of functional 1D nanostructured electrodes for energy storage applications will be stimulated.

Toward a High-Energy-Density Cathode with Enhanced Temperature Adaptability for Sodium-Ion Batteries: A Case Study of Na3MnZr(PO4)3 Microspheres with Embedded Dual-Carbon Networks

Polyanionic cathode materials that have high energy density and good temperature adaptability are in high demand for practical applications in sodium-ion batteries (SIBs). In this study, a scalable spray-drying strategy has been proposed to construct interconnected conductive networks composed of amorphous carbon and reduced graphene oxide in Na₃MnZr(PO₄)₃ microspheres (NMZP@C-rGO). The dual-carbon conductive networks provide fast electron migration pathways in the microspheres. Moreover, they significantly increase the porosity and specific surface area of the microspheres, which are conducive to accommodating the volume change and improving the electrode/electrolyte contact interface and the contribution of the pseudocapacitance effect to achieve fast sodium storage. As a result, NMZP@C-rGO exhibits excellent rate performance (50.9 mAh g^-1 at 50C and 30 °C, 35.4 mAh g^-1 at 50C and -15 °C) and long-term cycling stability (capacity retentions of 97.4 and 79.6% after 1500 cycles at 30 and -15 °C, respectively) in a wide temperature range.

Defect-free potassium manganese hexacyanoferrate cathode material for high-performance potassium-ion batteries

Potassium-ion batteries (KIBs) are promising electrochemical energy storage systems because of their low cost and high energy density. However, practical exploitation of KIBs is hampered by the lack of high-performance cathode materials. Here we report a potassium manganese hexacyanoferrate (K₂Mn[Fe(CN)₆]) material, with a negligible content of defects and water, for efficient high-voltage K-ion storage. When tested in combination with a K metal anode, the K₂Mn[Fe(CN)₆]-based electrode enables a cell specific energy of 609.7 Wh kg⁻¹ and 80% capacity retention after 7800 cycles. Moreover, a K-ion full-cell consisting of graphite and K₂Mn[Fe(CN)₆] as anode and cathode active materials, respectively, demonstrates a specific energy of 331.5 Wh kg⁻¹, remarkable rate capability, and negligible capacity decay for 300 cycles. The remarkable electrochemical energy storage performances of the K₂Mn[Fe(CN)₆] material are attributed to its stable frameworks that benefit from the defect-free structure.

Potassium-ion battery is a promising candidate for post-Li-ion energy storage but the lack of cathode materials hinders practical exploitation. Here the authors investigate defect-free potassium manganese hexacyanoferrate as cathode active material for high energy and long lifespan K-based cells.

Tunable Electrochemical Activity of P2-Na0.6Mn0.7Ni0.3O2-xFx Microspheres as High-Rate Cathodes for High-Performance Sodium Ion Batteries

As an important cathode candidate for the high-performance sodium ion batteries (SIBs), P2-type oxides with layered structures are needed to balance the specific capacities and cycling stability. As a result, a cation and anion codoped strategy has been adopted to tune the electrochemical activity of the redox centers and modulate the structure properties. Herein, a series of P2-Na_0.6Mn_0.7Ni_0.3O_2-xF_x (x = 0, 0.03, 0.05, and 0.07) cathodes with microsphere structures are synthesized, using a solid-state reaction in the presence of MnO₂ microsphere self-templates. Compared with the cation-doped Na_0.6Mn_0.7Ni_0.3O₂, additional F-doping can affect the lattice parameters and redox centers of Na_0.6Mn_0.7Ni_0.3O_2-xF_x. Comprehensively considering the specific capacities, cycling stability, and rate capability, the optimized x value in Na_0.6Mn_0.7Ni_0.3O_2-xF_x is determined to be 0.05. In the half cells, Na_0.6Mn_0.7Ni_0.3O_1.95F_0.05 (F-0.05) maintains a capacity of 90.5 mA h g^-1 in the first cycle at 1.0 A g^-1, giving a capacity retention of 78% within 900 cycles. The superior rate capability of F-0.05 is guaranteed by the larger diffusion coefficient of Na⁺ (D_Na) combined with higher charge transfer speed. In addition, when coupled with MoSe₂/PC anodes, the full cells also exhibit impressive electrochemical performance.

Multi-metal coordination polymers grown through hybrid molecular layer deposition

Coordination polymers deposited by hybrid molecular layer deposition (MLD) techniques are of interest as highly conformal, functional materials. Incorporation of a second metal into these coordination polymers can result in additional functionality or fine tuning of the materials properties. Here, we investigate the deposition of multi-metal coordination polymers using hybrid MLD of Zn-Al and Zn-Hf with ethylene glycol as the organic linker. It is found that facile transmetalation occurs for the Zn-Al films, which results in Al-rich films, but does not take place for the Zn-Hf films. Additionally, the Zn-Hf films are found to be more resilient to ambient conditions than the pure Zn-based coordination polymer.

Smart configuration of cobalt hexacyanoferrate assembled on carbon fiber cloths for fast aqueous flexible sodium ion pseudocapacitor

Aqueous rechargeable batteries (ARBs) have the advantages of low cost, high safety and sustainable environmental friendliness. However, the key challenge for ARBs is the narrow electrochemical stability window of the water, undoubtedly leading to the low output voltage, the underachieved capacity and a low energy density. Prussian blues and their analogues have attracted great research interest for energy storage due to the advantages of facile synthesis, versatile categories and tunable three dimensional frameworks. Herein a flexible integrated potassium cobalt hexacyano ferrates (Co-HCF) on carbon fiber clothes (CFCs) were designed through a feasible route combining the controllable electrochemical deposition and the efficient co-precipitation process. The Co-HCF@CFCs demonstrate an excellent sodium ion storage with a high reversible capacity of 91 mAh g^-1 at 1 A g^-1 and 55 mAh g^-1 at 10 A g^-1 in aqueous electrolytes. The long cycling stability at the high current demonstrate the excellent structure stability of the Co-HCF@CFCs. Analysis on the rate Cyclic voltammograms (CV) profiles reveal the fast electrochemical kinetics with the capacitive controlled process, while galvanostatic intermittent titration technique (GITT) tests fast diffusion coefficient related with the sodium ions intercalation/deintercalation in the Co-HCF@CFCs. In addition, the flexible Co-CHF@CFCs also demonstrate excellent performance for quasi-solid-state ARBs even at the high bending angles. The high quality Co-HCF@CFCs with advantage of high rate capability and excellent reversible capacity make them a promising candidate for high performance ARBs.