The potential role of biochar in the removal of organic and microbial contaminants from potable and reuse water: A review

Considerations for evaluating innovative stormwater treatment media for removal of dissolved contaminants of concern with focus on biochar

Stormwater from complex land uses is an important contributor of contaminants of concern (COCs) such as polychlorinated biphenyls (PCBs), polycyclic aromatic hydrocarbons (PAHs), Copper, and Zinc to receiving water bodies. A large portion of these COCs bind to particulate matter in stormwater, which can be removed through filtration by traditional media. However, the remaining dissolved COCs can be significant and require special attention such as engineered treatment measures and media. Biochar is a porous sorbent produced from a variety of organic materials. In the last decade biochar has been gaining attention as a stormwater treatment medium due to low cost compared to activated carbon. However, biochar is not a uniform product and selection of an appropriate biochar for the removal of specific contaminants can be a complex process. Biochars are synthesized from various feedstocks and using different manufacturing approaches, including pyrolysis temperature, impact the biochar properties thus affecting ability to remove stormwater contaminants. The local availability of specific biochar products is another important consideration. An evaluation of proposed stormwater control measure (SCM) media needs to consider the dynamic conditions associated with stormwater and its management, but the passive requirements of the SCM. The media should be able to mitigate flood risks, remove targeted COCs under high flow SCM conditions, and address practical considerations like cost, sourcing, and construction and maintenance. This paper outlines a process for selecting promising candidates for SCM media and evaluating their performance through laboratory tests and field deployment with special attention to unique stormwater considerations.

State-of-the-art of research progress on adsorptive removal of fluoride-contaminated water using biochar-based materials: Practical feasibility through reusability and column transport studies

Fluoride (F^-) is one of the essential elements found in soil and water released from geogenic sources and several anthropogenic activities. Fluoride causes fluorosis, dental and skeletal growth problems, teeth mottling, and neurological damage due to prolonged consumption, affecting millions worldwide. Adsorption is an extensively implemented technique in water and wastewater treatment for fluoride, with significant potential due to efficiency, cost-effectiveness, ease of operation, and reusability. This review highlights the current state of knowledge for fluoride adsorption using biochar-based materials and the limitations of biochar for fluoride-contaminated groundwater and industrial wastewater treatment. Biochar materials have shown significant adsorption capacities for fluoride under the influence of low pH, biochar dose, initial concentration, temperature, and co-existing ions. Modified biochar possesses various functional groups (-OH, -CC, -C-O, -CONH, -C-OH, X-OH), in which enhanced hydroxyl (-OH) groups onto the surface plays a significant role in fluoride adsorption via electrostatic attraction and ion exchange. Regeneration and reusability of biochar sorbents need to be performed to a greater extent to improve removal efficiency and reusability in field conditions. Furthermore, the present investigation identifies the limitations of biochar materials in treating fluoride-contaminated drinking groundwater and industrial effluents. The fluoride removal using biochar-based materials at an industrial scale for understanding the practical feasibility is yet to be documented. This review work recommend the feasibility of biochar-based materials in column studies for fluoride remediation in the future.

Evaluation of the Impact of Activated Biochar-Manure Compost Pellet Fertilizer on Volatile Organic Compound Emissions and Heavy Metal Saturation

For this experiment, pelletized activated biochar made of rice hullsor palm bark with swine manure compost was prepared to demonstrate the significant benefits of applying activated biochar-manure compost pellet fertilizer (ABMCP) inmitigating volatile organic compounds (VOCs), odor emission, and heavy metal saturation. Morphology and surface area analysis indicated that the activated rice hull biochar-manure compost pellet (ARP) had a significantly lower surface area, porous volume, and Fe content the activated palm biochar-manure compost pellet (APP). However, the ARP presented great potential to mitigate VOCs and odorant emissions. Our results indicated that the ARP reduced total reduced sulfur (TRS) and volatile fatty acids (VFAs) emissions by 69% and 93%, respectively. Heavy metals such as Pb, As, and Cd were not detected in the leachates fromthe ARP, APP, and swine manure compost. These results suggest that ABMCP can be a potential adsorbent to control VOCs and odorant emissions andpromote sustainable swine manure management and agricultural application.

Biochar-microorganism interactions for organic pollutant remediation: Challenges and perspectives

Numerous harmful chemicals are introduced every year in the environment through anthropogenic and geological activities raising global concerns of their ecotoxicological effects and decontamination strategies. Biochar technology has been recognized as an important pillar for recycling of biomass, contributing to the carbon capture and bioenergy industries, and remediation of contaminated soil, sediments and water. This paper aims to critically review the application potential of biochar with a special focus on the synergistic and antagonistic effects on contaminant-degrading microorganisms in single and mixed-contaminated systems. Owing to the high specific surface area, porous structure, and compatible surface chemistry, biochar can support the proliferation and activity of contaminant-degrading microorganisms. A combination of biochar and microorganisms to remove a variety of contaminants has gained popularity in recent years alongside traditional chemical and physical remediation technologies. The microbial compatibility of biochar can be improved by optimizing the surface parameters so that toxic pollutant release is minimized, biofilm formation is encouraged, and microbial populations are enhanced. Biocompatible biochar thus shows potential in the bioremediation of organic contaminants by harboring microbial populations, releasing contaminant-degrading enzymes, and protecting beneficial microorganisms from immediate toxicity of surrounding contaminants. This review recommends that biochar-microorganism co-deployment holds a great potential for the removal of contaminants thereby reducing the risk of organic contaminants to human and environmental health.

Treatment of faecal sludge and sewage effluent by pinewood biochar to reduce wastewater bacteria and inorganic contaminants leaching

Biochar is a valuable treatment option for faecal sludge management (FSM). However, the sanitation application rates of biochar in FSM are not well established. There is also a gap in knowledge about the effect of actual raw sewage effluent and sludge on organic and inorganic contaminants migration of biochar treated soil. This study investigated the concentration and migration rates of N, P, E. coli and faecal coliform bacteria through different soil-bed biochar column treatments leached with raw faecal sludge and sewage effluent. Forty-four soil-bed leaching columns with pinewood biochar rates at 5, 10 and 20 t/ha were set at the Bloemspruit wastewater plant, South Africa. The pinewood biochar used had a pH of 10.21, total C composition of 92%, surface area of 517 m²/g, and a pore size of 1.7 nm. It was found that the 20 t biochar per ha treatment with faecal sludge increased water retention (flows of 33 mm/h. at 0 t/ha compared to 0.8 mm/h. at 20 t/ha) and leachates purification. High detections were observed for faecal coliforms and E.coli above 4331 CFU/100 mL from the effluent and faecal sludge in soils without biochar. Detection of E.coli at 20 t/ha decreased to 1 CFU/100 mL while the faecal coliforms still had counts above 10 CFU/ 100 mL. The results showed a decreasing rate of nitrates, phosphates, zinc and copper with an increasing biochar application rate. Pinewood biochar showed significant removal efficiencies of bacteria (between 89 and 98%) and nitrates and phosphates (between 68 and 98%). Significant differences were seen at P < 0.05 between the means of the treatments with and without biochar. The results from the study show that pinewood biochar applied at rates between 5 and 20 t/ha has a high organic and inorganic contaminants reduction potential for FSM.

Soybean straw biochar activating peroxydisulfate to simultaneously eliminate tetracycline and tetracycline resistance bacteria: Insights on the mechanism

Tetracycline (TC) has been frequently detected in various environments, thus promoting the occurrence of resistance in bacterial populations. In this study, a suite of soybean straw biochars (SSBs) were fabricated under different pyrolysis temperatures (600-1000 °C), which were utilized as peroxydisulfate (PS) activators for TC degradation and TC resistant Escherichia coli (E. coli) disinfection. The purification effect of SSBs/PS systems manifested obvious positive dependence on pyrolysis temperature of SSBs with SSB1000/PS system obtained the superior TC degradation, E. coli disinfection and coexisting TC and E. coli elimination capacity. The leakage of intracellular DNA and the degradation of total DNA and extracellular DNA was revealed no matter in alone E. coli or combined pollution which can also be supported by the gradual ruptured bacterial morphology and attenuated internal components. It can be found that TC adsorption in SSBs played a significant role on TC degradation, while the electrostatic repulsion always existed between E. coli and SSB1000. Furthermore, a battery of solid evidences collectively demonstrated the significant different purification mechanism of TC and E. coli. The TC degradation was achieved dominantly by surface-bound radicals, while bactericidal activity should be attributed to free SO4·- in bulk solutions. In contrast to other SSBs, the largest mesopore volumes, highest C=O content, lowest interfacial charge transfer resistance and strongest electron donating capacity explained the outperformed catalytic performance of SSB1000.

Fabrication and Characterization of Effective Biochar Biosorbent Derived from Agricultural Waste to Remove Cationic Dyes from Wastewater

The main aim of this work is to treat sugarcane bagasse agricultural waste and prepare an efficient, promising, and eco-friendly adsorbent material. Biochar is an example of such a material, and it is an extremely versatile and eco-friendly biosorbent to treat wastewater. Crystal violet (CV)-dye and methylene blue (MB)-dye species are examples of serious organic pollutants. Herein, biochar was prepared firstly from sugarcane bagasse (SCB), and then a biochar biosorbent was synthesized through pyrolysis and surface activation with NaOH. SEM, TEM, FTIR, Raman, surface area, XRD, and EDX were used to characterize the investigated materials. The reuse of such waste materials is considered eco-friendly in nature. After that, the adsorption of MB and CV-species from synthetically prepared wastewater using treated biochar was investigated under various conditions. To demonstrate the study’s effectiveness, it was attempted to achieve optimum effectiveness at an optimum level by working with time, adsorbent dose, dye concentration, NaCl, pH, and temperature. The number of adsorbed dyes reduced as the dye concentrations increased and marginally decreased with NaCl but increased with the adsorbent dosage, pH, and temperature of the solution increased. Furthermore, it climbed for around 15 min before reaching equilibrium, indicating that all pores were almost full. Under the optimum condition, the removal perecentages of both MB and CV-dyes were ≥98%. The obtained equilibrium data was represented by Langmuir and Freundlich isotherm models. Additionally, the thermodynamic parameters were examined at various temperatures. The results illustrated that the Langmuir isotherm was utilized to explain the experimental adsorption processes with maximum adsorption capacities of MB and CV-dyes were 114.42 and 99.50 mgg⁻¹, respectively. The kinetic data were estimated by pseudo-first and pseudo-second-order equations. The best correlation coefficients of the investigated adsorption processes were described by the pseudo-second-order kinetic model. Finally, the data obtained were compared with some works published during the last four years.

Adsorbents Used for Microcystin Removal from Water Sources: Current Knowledge and Future Prospects

The increasing occurrence of toxic cyanobacteria in water sources, driven by climate change and eutrophication, is of great concern worldwide today. Cyanobacterial blooms can negatively affect water bodies and generate harmful secondary metabolites, namely microcystins (MCs), which significantly impair water quality. Various adsorbents used for MC removal from water sources were assessed in this investigation. Activated carbon constitutes the most widely used adsorbent for treating contaminated waters due to its high affinity for adsorbing MCs. Alternative adsorbents have also been proposed and reported to provide higher efficiency, but the studies carried out so far in this regard are still insufficient. The mechanisms implicated in MC adsorption upon different adsorbents should be further detailed for a better optimization of the adsorption process. Certainly, adsorbent characteristics, water pH and temperature are the main factors influencing the adsorption of MCs. In this context, optimization studies must be performed considering the effectiveness, economic aspects associated with each adsorbent. This review provides guidelines for more practical field applications of the adsorption in the treatment of waters actually contaminated with MCs.

Oyster Shell Modified Tobacco Straw Biochar: Efficient Phosphate Adsorption at Wide Range of pH Values

In order to improve the phosphate adsorption capacity of Ca-loaded biochar at a wide range of pH values, Ca (oyster shell) was loaded as Ca(OH)2 on the tobacco stalk biochar (Ca-BC), which was prepared by high-temperature calcination, ultrasonic treatment, and stirring impregnation method. The phosphorus removal performance of Ca-BC adsorption was studied by batch adsorption experiments, and the mechanism of Ca-BC adsorption and phosphorus removal was investigated by SEM-EDS, FTIR, and XRD. The results showed that after high-temperature calcination, oyster shells became CaO, then converted into Ca(OH)2 in the process of stirring impregnation and had activated the pore expansion effect of biochar. According to the Langmuir model, the adsorption capacity of Ca-BC for phosphate was 88.64 mg P/g, and the adsorption process followed pseudo-second-order kinetics. The Ca(OH)2 on the surface of biochar under the initial pH acidic condition preferentially neutralizes with H+ acid-base in solution, so that Ca-BC chemically precipitates with phosphate under alkaline conditions, which increases the adsorption capacity by 3-15 times compared with other Ca-loaded biochar. Ca-BC phosphate removal rate of livestock wastewater (pig and cattle farms) is 91~95%, whereas pond and domestic wastewater can be quantitatively removed. This study provides an experimental basis for efficient phosphorus removal by Ca-modified biochar and suggesting possible applications in real wastewater.

Integrated approaches to mitigate threats from emerging potentially toxic elements: A way forward for sustainable environmental management

Potentially toxic elements (PTEs) such as toxic metal (loid)s and other emerging hazardous contaminants, exist in the environment and poses a serious threat. A large amount of wastewater containing PTEs such as cadmium, chromium, copper, nickel, arsenic, lead, zinc, etc. Release from industries during production process. Besides these, chemical-based fertilizers used in soils during crop production have become one of the crucial sources of PTEs. Various techniques are being employed for the mitigation of PTEs like chemical precipitation, ion exchange, coagulation, activated carbon, adsorption, membrane filtration, and bioremediation. Among these mitigation strategies, biological processes such as bioremediation, phytoremediation etc. Are extensively used, as they are economic have high-efficiency rate and are eco-friendly. This review intends to provide information on PTEs contamination through various sources; along with the toxicity of metal (loid)s with respect to their patterns of transmission and risks in the changing environment. Various remediation methods for the management of these pollutants along with their techno-economic perspective are also summarized in this review.

Characterization of molecular dissolved organic matter removed by modified eucalyptus-based biochar and disinfection by-product formation potential using Orbitrap mass spectrometric analysis

Biochar is an alternative adsorbent, with similar characteristics to activated carbon, that can be applied to water treatment to remove dissolved organic matter (DOM) as disinfection by-product (DBP) precursors with comparable efficiency and better cost-effectiveness and sustainability relative to commercial alternatives. We applied non-targeted analysis with Orbitrap mass spectrometry to investigate changes in molecular DOM and DBP formation after treating DOM-containing water with biochar. Two surface water sources, Phong River (PR) in Khon Kaen, Thailand and Suwannee river (SR), USA, were tested using three types of eucalyptus-derived biochar (i.e., KOH-modified, calcined, and both) were selected as adsorbents and compared to commercial coconut-based activated carbon (ccAC). The results showed that calcination increased the surface area, pore volume, and functional groups of biochar responsible for adsorption. The calcined biochar achieved higher DOC removal efficiencies for both rivers than other adsorbents. PR contains more adsorbable DOM as over 800 molecules with carbon, hydrogen, and oxygen (CHO) features that were decreased or totally removed by all adsorbents. In contrast, for SR treatment, KOH-modified and calcined biochar was found to decrease over 800 CHO features, compared to around 500 and 400 CHO features for calcined biochar and ccAC, respectively. However, numerous background CHO features with reduced character (i.e., low degree of oxidation) were found after water treatment by calcined biochar, resulting in higher DBP formation after chlorination compared to the other adsorbents. The results of this study have important implications for future preparation of biochar for water treatment.

Industrial byproducts for the soil stabilization of trace elements and per- and polyfluorinated alkyl substances (PFASs)

The present work was the first exploration of the use of industrial byproducts from iron and titanium processing as sorbents for the stabilization of soil contamination. The main aim was to test slag waste and iron-rich charred fossil coal ("Fe-char"), as sorbents for per- and polyfluorinated alkyl substances (PFASs), as well as lead (Pb) and antimony (Sb), in four soils from a firefighting training area (PFASs) and a shooting range (Pb and Sb). Adding slag (10-20%) to shooting range soils decreased the leaching of Pb and Sb up to 50-90%. Fe-char amendment to these soils resulted in a moderate reduction in Sb leaching (20-70%) and a slightly stronger effect on Pb (40-50%). The sorption is most likely explained by the presence of Fe oxyhydroxides. These are present in the highest concentrations in the slag, probably resulting in more effective metal binding to the slag than to the Fe-char. Fe-char but not slag proved to be a strong sorbent for PFASs (reducing PFAS leaching from the soil by up to 99.7%) in soil containing low total organic carbon (TOC; 1.2%) but not in high-TOC soil (34%). The sorption coefficient K_D for Fe-char was high, in the range of 10^4.3 to 10^6.5 L/kg at 1 ng/L in the low-TOC soil. The K_D value increased with increasing perfluorocarbon chain length, exceeding PFAS sorption to biochar in the low ng/L concentration range. This result indicates that the mechanism behind the strong PFAS sorption to Fe-char was mainly van der Waals dispersive interactions between the hydrophobic PFAS-chain and the aromatic π-electron systems on nanopore walls within the Fe-char matrix. Overall, this study indicates that industrial byproducts can provide sustainable and cost-effective materials for soil remediation. However, the sorbent needs to be tailored to the type of soil and type of contamination.

Adsorption Kinetics of Imidacloprid, Acetamiprid and Methomyl Pesticides in Aqueous Solution onto Eucalyptus Woodchip Derived Biochar

This work reports the application of a biochar (BC) derived from eucalyptus wood chips to remove pesticides (imidacloprid, acetamiprid and methomyl) from water. The pseudo-second order kinetic adsorption model is the best fit describing the adsorption of pesticides on BC. Furthermore, the Langmuir model correlated well with the adsorption isotherm data for acetamiprid and methomyl, while the Freundlich model was selected to explain the adsorption of imidacloprid on BC. The maximum adsorption capacities for methomyl, imidacloprid and acetamiprid on the BC material are 32.42, 14.75 and 4.87 mg g−1, respectively. The highest adsorption capacity of methomyl on the BC surface could be the result of multilayer adsorption suggested by the adsorption isotherm studies, with imidacloprid (or acetamiprid) monolayer being adsorbed on the BC surface. The structure, functional groups of pesticides, including their polarity, all played an important role contributing to the performance of biochar sorbent. Preferable interactions between the studied pesticides and the BC surface may include π-π interactions and hydrogen bonding. The steric aromatic entity in adsorbed imidacloprid and acetamiprid on the BC surface may hinder the possibility of other pesticide molecules approaching the available sorption sites on the surface.

Biochar from fungiculture waste for adsorption of endocrine disruptors in water

The agricultural residues are ecofriendly alternatives for removing contaminants from water. In this way, a novel biochar from the spent mushroom substrate (SMS) was produced and assessed to remove endocrine disruptor from water in batch and fixed-bed method. SMS were dried, ground, and pyrolyzed. Pyrolysis was carried out in three different conditions at 250 and 450 °C, with a residence time of 1 h, and at 600 °C with a residence time of 20 min. The biochar was firstly tested in a pilot batch with 17α-ethinylestradiol (EE2) and progesterone. The residual concentrations of the endocrine disruptors were determined by HPLC. The biochar obtained at 600 °C showed the best removal efficiency results. Then, adsorption parameters (isotherm and kinetics), fixed bed tests and biochar characterization were carried out. The Langmuir model fits better to progesterone while the Freundlich model fits better to EE2. The Langmuir model isotherm indicated a maximum adsorption capacity of 232.64 mg progesterone/g biochar, and 138.98 mg EE2/g biochar. Images from scanning electrons microscopy showed that the 600 °C biochar presented higher porosity than others. In the fixed bed test the removal capacity was more than 80% for both endocrine disruptors. Thus, the biochar showed a good and viable option for removal of contaminants, such as hormones.

Production of engineered-biochar under different pyrolysis conditions for phosphorus removal from aqueous solution

Phosphorus (P) recovery from wastewater through biochar is an alternative to build a sustainable circular economy and save non-renewable P reservoirs. The efficiency of cations in removing P from wastewater under different pyrolysis conditions is still lacking. We aimed at studying P adsorption and release from biochar enriched with Al³⁺ and Mg²⁺, prepared under air-limited and N₂-flow pyrolysis conditions. Biochar samples were produced from pig manure (PMB) and impregnated, separately, with 20% of AlCl₃ and MgCl₂ solutions on both pyrolysis conditions. The materials were characterized for pH, electrical conductivity (EC), total nutrient content, ash, specific surface area (SSA), pore-volume, FTIR, XRD, and SEM-EDX. Phosphorus adsorption was studied by kinetics and adsorption isotherms, as well as desorption. The biochar impregnated with Mg²⁺ and produced in the muffle furnace achieved the maximum P adsorption (231 mg g^-1), and 100% of the adsorbed P was released in solutions of Mehlich-1 and citric acid 2%. The pyrolysis conditions had a small or no influence on the biochar properties governing P adsorption, such as chemical functional groups, surface area, quantity and size of pores, and formation of synthetic minerals. Therefore, it is possible to produce biochar without using N₂ as a carrier gas when it comes to P adsorption studies. Mechanisms of P removal comprise precipitation with cations, surface complexation, ligand exchange reactions, and electrostatic attraction on the biochar surface. Overall, Mg-impregnated biochar is a suitable matrix to remove P from aqueous media and to add value to organic residues while producing an environmentally friendly material for reuse in soils.

Removal of potentially toxic elements from contaminated soil and water using bone char compared to plant- and bone-derived biochars: A review

Conversion of hazardous waste materials to value-added products is of great interest from both agro-environmental and economic points of view. Bone char (BC) has been used for the removal of potentially toxic elements (PTEs) from contaminated water, however, its potential BC for the immobilization of PTEs in contaminated water and soil compared to bone (BBC)- and plant (PBC)-derived biochars has not been reviewed yet. This review presents an elaboration for the potentials of BC for the remediation of PTEs-contaminated water and soil in comparison with PBC and BBC. This work critically reviews the preparation and characterization of BC, BBC, and PBC and their PTEs removal efficiency from water and soils. The mechanisms of PTE removal by BC, BBC, and PBC are also discussed in relation to their physicochemical characteristics. The review demonstrates the key opportunities for using bone waste as feedstock for producing BC and BBC as promising low-cost and effective materials for the remediation of PTEs-contaminated water and soils and also elucidates the possible combinations of BC and BBC aiming to effectively immobilize PTEs in water and soils.

Progress and prospects of applying carbon-based materials (and nanomaterials) to accelerate anaerobic bioprocesses for the removal of micropollutants

Carbon-based materials (CBM), including activated carbon (AC), activated fibres (ACF), biochar (BC), nanotubes (CNT), carbon xenogels (CX) and graphene nanosheets (GNS), possess unique properties such as high surface area, sorption and catalytic characteristics, making them very versatile for many applications in environmental remediation. They are powerful redox mediators (RM) in anaerobic processes, accelerating the rates and extending the level of the reduction of pollutants and, consequently, affecting positively the global efficiency of their partial or total removal. The extraordinary conductive properties of CBM, and the possibility of tailoring their surface to address specific pollutants, make them promising as catalysts in the treatment of effluents containing diverse pollutants. CBM can be combined with magnetic nanoparticles (MNM) assembling catalytic and magnetic properties in a single composite (C@MNM), allowing their recovery and reuse after the treatment process. Furthermore, these composites have demonstrated extraordinary catalytic properties. Evaluation of the toxicological and environmental impact of direct and indirect exposure to nanomaterials is an important issue that must be considered when nanomaterials are applied. Though the chemical composition, size and physical characteristics may contribute to toxicological effects, the potential toxic impact of using CBM is not completely clear and is not always assessed. This review gives an overview of the current research on the application of CBM and C@MNM in bioremediation and on the possible environmental impact and toxicity.

Adsorptive removal of organic dyes via porous materials for wastewater treatment in recent decades: A review on species, mechanisms and perspectives

Organic dyes, a type of high toxic and carcinogenic chemicals that present severe threats to human and aquatic life, are the most commonly seen organic pollutants in wastewater of industries such as textile, rubber, cosmetic industry etc. Various techniques for the removal of dyes are compared in this review. Adsorption has proven to be a facile and promising approach for the removal of dyes in wastewater. This work focuses on the latest development of various porous materials for the adsorption of organic dyes. The characteristics, functionalization and modification of different porous materials are also presented. Furthermore, adsorption behaviors and mechanism of these adsorbents in the adsorption of organic dyes are critically reviewed. Finally, challenges and opportunities for future research in the development of novel materials for the highly efficient removal of dyes are proposed.

Biochar Adsorbents for Arsenic Removal from Water Environment: A Review

Arsenic intake can cause human health disorders to the lungs, urinary tract, kidney, liver, hyper-pigmentation, muscles, neurological and even cancer. Biochar is potent, economical and ecologically sound adsorbents for water purification. After surface modifications, adsorption capacity of biochar significantly increased due to high porosity and reactivity. Adsorption capacities of the biochar derived from the municipal solid waste and KOH mixed municipal solid waste were increased from 24.49 and 30.98 mg/g for arsenic adsorption. Complex formation, electrostatic behavior and ion exchange are important mechanisms for arsenic adsorption. Organic arsenic removal using biochar is a major challenge. Hence, more innovative research should be conducted to achieve one of the 17 sustainable development goals of the United Nations i.e. "providing safe drinking water for all". This review is focused on the arsenic removal from water using pristine and modified biochar adsorbents. Recent advances in production methods of biochar adsorbents and mechanisms of arsenic removal from water are also illustrated.

Improved removal performance of Gram-negative and Gram-positive bacteria in sand filtration system with arginine modified biochar amendment

Bacterial removal by sand filtration system is commonly inefficient due to the low bacterial adsorption capacity of sand. To improve the bacterial removal performance, biochar fabricated at different temperatures (400 °C, 550 °C and 700 °C) and arginine modified biochar were added into sand filtration columns as filter layers (0.5 and 1 wt%). Addition of biochar into sand columns could improve the removal efficiency for both Escherichia coli and Bacillus subtilis under both slow (4 m/day) and fast (240 m/day) filtration conditions. Bacterial removal efficiency in sand columns with the addition of biochar fabricated at 700 °C were higher than those fabricated at 400 °C and 550 °C due to its best bacterial adsorption capacity. Modification of biochar with arginine could further improve the bacterial removal performance. Specifically, complete bacterial removal (1.35 × 10⁷ ± 10% cells/mL) could be achieved under both slow and fast filtration conditions in sand columns with 1 wt% arginine functionalized biochar amendment. The enhanced bacterial adsorption capacity mainly contributed to the increased bacterial capture performance in columns with addition of arginine-modified biochar. Bacteria more tightly bounded with arginine-modified biochar than bulk biochar. Moreover, complete bacterial removal with the copresence of 5 mg/L humic acid in suspensions was acquired in columns with addition of 1 wt% arginine-modified biochar. Efficient bacterial removal in actual river water, multiple filtration cycles as well as longtime injection duration (100 pore volumes injection) was also obtained. The results of this study demonstrated that arginine-modified biochar had great potential to treat water contaminated by pathogenic bacteria.

Processing of natural fibre and method improvement for removal of endocrine-disrupting compounds

Persistent endocrine-disrupting compounds (EDCs) in bodies of water are a concern for human health and constitute an environmental issue, even if present in trace amounts. Conventional treatment systems do not entirely remove EDCs from discharge effluent. Due to the ultra-trace level of EDCs which affect human health and pose an environmental issue, developing new approaches and techniques to remove these micropollutants from the discharged effluent is vital. This review discusses the most common methods of eliminating EDCs through preliminary, primary, secondary and tertiary treatments. The adsorption process is favoured for EDC removal, as it is an economical and straightforward option. The NABC aspects, which are the need, approach, benefits and challenges, were analysed based on existing circumstances, highlighting biochar as a green and renewable adsorbent for the removal of organic contaminants. From the environmental point of view, the effectiveness of this method, which uses natural fibre from the kenaf plant as a porous and economical biochar material with a selected lignocellulosic biomass, provides insights into the advantages of biochar-derived adsorbents. Essentially, the improvement of the natural fibre as an adsorbent is a focus, using carbonisation, activation, and the physiochemical process to enhance the adsorption ability of the material for pollutants in bodies of water. This output will complement sustainable water management approaches presented in previous studies for combating the emerging pollutant crisis via novel green and environmentally safe options.

Effect of composting and amendment with biochar and woodchips on the fate and leachability of pharmaceuticals in biosolids destined for land application

Land application of biosolids can improve soil fertility and enhance crop production. However, the occurrence and persistence of pharmaceutical compounds in the biosolids may result in leaching of these contaminants to surface water and groundwater, causing environmental contamination. This study evaluated the effectiveness of two organic amendments [biochar (BC) and woodchips (WC)] for reducing the concentration and leachability (mobility) of four pharmaceuticals in biosolids derived from wastewater treatment plants in southern Ontario, Canada. The effect of 360-d composting on fate and leachabilities of target pharmaceuticals in biosolid mixtures was also investigated. Composting decreased total and leachable concentrations of pharmaceuticals in unamended and BC- and WC-amended biosolids to various degrees, from 10% up to 99% depending on the compound. Blending BC or WC into the biosolids greatly increased the removal rates of the target pharmaceuticals, while simultaneously decreasing their half-lives (t_0.5), compared to unamended biosolids. The t_0.5 of contaminants in this study followed the order: carbamazepine (304-3053 d) > gemfibrozil (42.3-92.4 d) > naproxen (15.3-104 d) > ibuprofen (12.5-19.0 d). Amendment with BC and(or) WC significantly reduced the leachability of carbamazepine, ibuprofen, and gemfibrozil to variable extents, but significantly enhanced the leachability of naproxen, compared to unamended biosolids (P < 0.05). Biochar and WC exhibited different (positive or negative) effects on the leachability of individual pharmaceuticals. Significantly lower concentrations of total and(or) leachable (mobile) pharmaceuticals were observed in amended biosolids than unamended biosolids (P < 0.05). Biochar and WC are effective amendments that can reduce the environmental impact of biosolid land applications with respect to pharmaceutical contamination.

Biochar application in biofiltration systems to remove nutrients, pathogens, and pharmaceutical and personal care products from wastewater

Although conventional on-site wastewater treatment systems (OWTSs) provide only primary treatment of domestic wastewater, removal of a limited level of nutrients (N, P), pathogens, and pharmaceuticals and personal care products (PPCPs) could be achieved by such a treatment process. Biochar has the capacity to remove various contaminants and has been widely used as an ideal soil amendment in agriculture due to its persistence, superior nutrient-retention properties, low cost, and ready availability. However, few applications on the use of biochar in onsite wastewater treatment have been explored. In this review, we systematically reviewed the applications of biochar in filtration-based OWTSs for nutrient (N, P) removal and recovery as well as pathogen and PPCP removal. Although adsorption was the main mechanism for P, pathogen, and PPCP removal, biochar can also serve as the growth media for enhanced biological degradation, improves available alkalinity, and increases water holding capacity in the OWTSs. The biochar source, surface modification methods, and preparation procedures (e.g., pyrolysis temperature change) have significant effects on contaminant removal performance in biochar-amended OWTSs. Specifically, contradictory results have been reported on the effect of pyrolysis temperature change on biochar removal performance (i.e., increased, decreased, or no change) of N, P, and PPCPs. Wastewater composition and environmental pH also play important roles in the removal of nutrients, pathogens, and PPCPs. Overall, biochar holds great potential to serve as an alternative filtration material or to be amended to the current OWTS to improve system performance in removing a variety of contaminants at low cost.

Abiotic reduction of 3-nitro-1,2,4-triazol-5-one (NTO) and other munitions constituents by wood-derived biochar through its rechargeable electron storage capacity

The environmental fate of 3-nitro-1,2,4-triazol-5-one (NTO) and other insensitive munitions constituents (MCs) is of significant concern due to their high water solubility and mobility relative to legacy MCs. Plant-based biochars have been shown to possess a considerable electron storage capacity (ESC), which enables them to undergo reversible electron transfer reactions. We hypothesized biochar can act as a rechargeable electron donor to effect abiotic reduction of MCs repeatedly through its ESC. To test this hypothesis, MC reduction experiments were performed using wood-derived biochars that were oxidized with dissolved oxygen or reduced with dithionite. Removal of aqueous NTO, an anion at circumneutral pH, by oxidized biochar was minimal and occurred through reversible adsorption. In contrast, NTO removal by reduced biochar was much more pronounced and occurred predominantly through reduction, with concomitant formation of 3-amino-1,2,4-triazol-5-one (ATO). Mass balance and electron recovery with ferricyanide further showed that (1) the amount of NTO reduced to ATO was relatively constant (85-100 μmol per gram of biochar) at pH 6-10; (2) the fraction of biochar ESC reactive toward NTO was ca. 30% of that toward ferricyanide; (3) the NTO-reactive fraction of the ESC was regenerable over multiple redox cycles. We also evaluated biochar transformation of other MCs, including nitroguanidine (NQ), 2,4-dinitroanisole (DNAN), and hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX). While mass and electron balances could not be established due to sorption, DNAN and RDX reduction by reduced biochar was confirmed via detection of multiple reduction products. In contrast, NQ was not reduced under any of the conditions tested. This study is the first demonstration of organic contaminant degradation through biochar's rechargeable ESC. Our results indicate biochar is a regenerable electron storage medium and sorbent that can remove MCs from water through concurrent reduction and sorption, and is thus potentially useful for pollution control and remediation at military facilities.

Tailoring biochar for persulfate-based environmental catalysis: Impact of biomass feedstocks

Biochar, a carbonaceous material with engineering potential, has gained attention as an efficient catalyst in persulfate-based advanced oxidation processes (PS-AOPs). Although biomass feedstocks are known as a critical factor for the performance of biochar, the relationship between the catalytic efficiency/mechanism and the types of biomass feedstocks is still unclear. Thus, according to recent advances in experimental and theoretical researches, this paper provides a systematic review of the properties of biochar, and the relationship between catalytic performance in PS-AOPs and biomass feedstocks, where the differences in physicochemical properties (surface properties, pore structure, etc.) and activation path of different sourced biochars, are introduced. In addition, how the tailoring of biochar (such as heteroatomic doping and co-pyrolysis of biomass) affects its activation efficiency and mechanism in PS-AOPs is summarized. Finally, the suitable application scenarios or systems of different sourced biochars, appropriate methods to improve the catalytic performance of different types of biochar and the prospects and challenges for the development of biochar in PS-AOPs are proposed.

A comprehensive review on emerging trends in industrial wastewater research

Rapid industrialization is one of the intricate factors that is linked to the depletion of water resources and increased generation of wastewater. Due to various obstructions and impediments, such as ineffective treatment solutions, exorbitant prices, lack of basic amenities, insufficient financial assistance, and technical expertise, sustainable treatment of industrial effluents has become an onerous process in most parts of the world. The majority of current treatment solutions are conventional and outdated, and thus fall short to remove all the contaminants efficiently from the industrial wastewater. Moreover, poorly treated or untreated industrial effluents are indiscriminately dumped into water bodies such as lakes, ponds, and rivers, causing substantial health hazards to humans and animals and serious threats to the aquatic ecosystem. Thus, there is a need for highly efficient, cost-effective, and sustainable technologies for the treatment of industrial wastewater. Employment of microbial technologies such as microbial fuel cells and microalgal technologies, treatment of wastewater can be coupled with the production of bioelectricity and valuable biomass, respectively. Moreover, with nanofiltration and biochar technologies, the efficiency of the overall treatment procedure can be increased to a greater extent. The present review aims to highlight opportunities and challenges associated with some of the emerging trends in industrial wastewater research.

Biochars intended for water filtration: A comparative study with activated carbons of their physicochemical properties and removal efficiency towards neutral and anionic organic pollutants

Seven biochars (BCs) obtained from pyrolysis or gasification of different vegetal feedstocks were thoroughly characterized in comparison with three commercial activated carbons (ACs) routinely used in drinking water treatment plants. BCs and ACs characterization included the determinations of ash, iodine and methylene blue adsorption indexes, and the release of metals and polycyclic aromatic hydrocarbons, which were performed according to international standards applied for adsorption media to be used in drinking waters. Total specific surface area, micropore and mesopore specific surface area, pH of the point of zero charge, and the release of polychlorinated biphenyls were also determined in all chars. Principal component analysis and cluster analysis were performed in order to summarize the complex set of information deriving from the aforementioned characterizations, highlighting the BC most similar (BC6 from high temperature gasification of woody biomass) and most different (BC7 from low-temperature pyrolysis of corn cob) from ACs. These BCs were studied for their adsorption in ultrapure water towards diiodoacetic acid (an emergent disinfection by-product), benzene, and 1.2-dichlorobenzene, in comparison with ACs, and results obtained were fitted by linearized Freundlich equation. Overall, BC6 showed higher sorption performances compared to BC7, even though both BCs were less performing sorbents than ACs. However, the sorption properties of BCs were maintained also in real water samples collected from drinking water treatment plants.

Effects of different feedstocks-based biochar on soil remediation: A review

As a promising amendment, biochar has excellent characteristics and can be used as a remediation agent for diverse types of soil pollution. Biochar is mostly made from agricultural wastes, forestry wastes, and biosolids (eg, sewage sludge), but not all the biochar has the same performance in the improvement of soil quality. There is a lack of guidelines devoted to the selection of biochar to be used for different types of soil pollution, and this can undermine the remediation efficiency. To shed light on this sensitive issue, this review focus on the following aspects, (i) how feedstocks affect biochar properties, (ii) the effects of biochar on heavy metals and organic pollutants in soil, and (iii) the impact on greenhouse gas emissions from soil. Generally, the biochars produced from crop residue and woody biomass which are composed of lignin, cellulose, and hemicellulose are more suitable for organic pollution remediation and greenhouse gas emission reduction, while biochar with high ash content are more suitable for cationic organic pollutant and heavy metal pollution (manure and sludge, etc.). Additionally, the effect of biochar on soil microorganisms shows that gram-negative bacteria in soil tend to use WB biochar with high lignin content, while biochar from OW (rich in P, K, Mg, and other nutrients) is more able to promote enzyme activity. Finally, our recommendations on feedstocks selection are presented in the form of a flow diagram, which is precisely intended to be used as a support for decisions on the crucial proportioning conditions to be selected for the preparation of biochar having specific properties and to maximize its efficiency in pollution control.

Sewage sludge-derived biochar for the adsorptive removal of wastewater pollutants: A critical review

The production of biochar from sewage sludge pyrolysis is a promising approach to transform the waste resultant from wastewater treatment plants (WWTPs) to a potential adsorbent. The current review provides an up-to-date review regarding important aspects of sewage sludge pyrolysis, highlighting the process that results major solid fraction (biochar), as high-value product. Further, the physio-chemical characteristics of sewage-sludge derived biochar such as the elemental composition, specific surface area, pore size and volume, the functional groups, surface morphology and heavy metal content are discussed. Recent progress on adsorption of metals, emerging pollutants, dyes, nutrients and oil are discussed and the results are examined. The sewage sludge-derived biochar is a promising material that can make significant contributions on pollutants removal from water by adsorption and additional benefit of the management of huge volume of sewage. Considering all these aspects, this field of research still needs more attention from the researchers in the direction of the technological features and sustainability aspects.

Biochar-based bioretention systems for removal of chemical and microbial pollutants from stormwater: A critical review

Biochar has been increasingly used as a filter medium in engineered low impact development systems (e.g., bioretention systems) for decontamination of urban stormwater and management of hydrology. This review paper critically analyzes the performance of biochar-based biofiltration systems for removal of chemical and microbial pollutants present in urban runoff. Biochar-amended biofiltration systems efficiently remove diverse pollutants such as total nitrogen (32 - 61%), total phosphorus: (45 - 94%), heavy metals (27 - 100%), organics (54 - 100%) and microbial pollutants (log₁₀ removal: 0.78 - 4.23) from urban runoff. The variation of biofiltration performance is due to changes in biochar characteristics, the abundance of dissolved organic matter and/or stormwater chemistry. The dominant mechanisms responsible for removal of chemical pollutants are sorption, ion exchange and/or biotransformation, whereas filtration/straining is the major mechanism for bacteria removal. The pseudo-second order and Langmuir isotherm are the best models that describe the kinetics and chemical equilibrium of pollutants, respectively. This critical review provides the fundamental scientific knowledge for designing highly efficient biochar-based bioretention systems for removal of diverse pollutants from urban stormwater. The key knowledge gaps that should be addressed in future research include long-term field-scale bioretention study, development of novel methods for filter media regeneration/reuse, and dynamics of filter media microbial communities.

Sustainable synthesis of rose flower-like magnetic biochar from tea waste for environmental applications

Introduction

Biochar utilization for adsorption seems to be the most cost-effective, easy/fast approach for pollutants removal from water and wastewater. Due to the high adsorption properties, magnetic biochar proved to be efficient in the sorption of heavy metals and nutrients. Although there are several studies on development of magnetic biochars, there is a lack of research on development of high-performance magnetic biochar from food waste for removal applications.

Objectives

This study aimed at preparing new classes of magnetic biochar derived from tea waste (TBC) for removal of heavy metals (Ni²⁺, Co²⁺), and nutrients (NH₄⁺ and PO₄³⁻) from water and effective fertilizer (source of NH₄⁺ and PO₄³⁻).

Methods

Standard carbonization process and ultrafast microwave have been used for fabrication of TBCs. The removal of nickel, cobalt as the representatives of heavy metals, and over-enriched nutrients (NH₄⁺ and PO₄³⁻) from water were tested and the removal kinetics, mechanism, and the effect of pH, dissolved organic matter and ionic strength were studied. Simultaneously, possible fertilizing effect of TBC for controlled release of nutrients (NH₄⁺ and PO₄³⁻) in soil was investigated.

Results

Up to 147.84 mg g⁻¹ of Ni²⁺ and 160.00 mg g⁻¹ of Co²⁺ were adsorbed onto tested biochars. The process of co-adsorption was also efficient (at least 131.68 mg g⁻¹ of Co²⁺ and 160.00 mg g⁻¹ of Ni²⁺). The highest adsorbed amount of NH₄⁺ was 49.43 mg g⁻¹, and the highest amount of PO₄³⁻ was 112.61 mg g⁻¹. The increase of the solution ionic strength and the presence of natural organic matter affected both the amount of adsorbed Ni²⁺+Co²⁺ and the reaction mechanism.

Conclusions

The results revealed that magnetic nanoparticle impregnated onto tea biochar, can be a very promising alternative for wastewater treatment especially considering removal of heavy metals and nutrients and slow-release fertilizer to improve the composition of soil elements.

Effective Removal of Acid Dye in Synthetic and Silk Dyeing Effluent: Isotherm and Kinetic Studies

Here, we propose a low-cost, sustainable, and viable adsorbent (pine tree-derived biochar) to remove acid dyes such as acid violet 17 (AV), which is used in the silk dyeing industry. As a case study, the AV removal process was demonstrated using synthetic effluent and further as a proof of concept using real dye effluent produced from the Sirumugai textile unit in India. The pine tree-derived biochar was selected for removal of aqueous AV dye in batch and fixed-bed column studies. The adsorbent material was characterized for crystallinity (XRD), surface area (BET), surface morphology and elemental compositions (SEM-EDX), thermal stability (TGA), weight loss (DGA), and functional groups (FTIR). Batch sorption studies were performed to evaluate (i) adsorption at various pH values (at pH 2 to 7), (ii) isotherms (at 10, 25, and 35 °C) to assess the temperature effect on the sorption efficiency, and (iii) kinetics to reveal the effect of time, adsorbent dose, and initial concentration on the reaction rate. After systematic evaluation, 2 g/L biochar, 25 mg/L AV, pH 3, 40 °C, and 40 and 360 min in a completely mixed batch study resulted in 50 and 90% dye removal, respectively. The isoelectric point at pH 3.7 ± 0.2 results in maximum dye removal, therefore suggesting that monitoring the ratio of different effluent (acid/wash/dye) can improve the colorant removal efficiency. The Langmuir isotherm best fits with the sorption of AV to biochar, provided a maximal dye uptake of 29 mg/g at 40 °C, showing that adsorption was endothermic. Fixed-bed studies were conducted at room temperature with an initial dye concentration of 25 and 50 mg/L. The glass columns were packed with biochar (bed depth 20 cm, pore volume = 14 mL) at an initial pH of 5.0 and a 10 mL/min flow rate for 120 min. Finally, the regeneration of the adsorbent was achieved using desorption studies conducted under the proposed experimental conditions resulted in 90-93% removal of AV even after five cycles of regeneration.

A Low-Temperature Dehydration Carbon-Fixation Strategy for Lignocellulose-Based Hierarchical Porous Carbon for Supercapacitors

Lignocellulose-based hierarchical porous carbon is a very promising electrode material for supercapacitors, but lower volumetric energy density and yield have hindered its practical applications. Herein, a low-temperature dehydration carbon-fixation method using NH₄ Cl as modification reagent was developed to prepare rice husk-based hierarchical porous carbon (RHPC) with high volumetric performance and yield. The RHPC-N electrode exhibited a higher volumetric specific capacitance of 134.4 F cm^-3 than that of the RHPC electrode (98.4 F cm^-3 ) in 1 m Et₄ NBF₄ /propylene carbonate electrolyte. The volumetric energy density (28.8 Wh L^-1 ) of the RHPC-N electrode was 37.1 % higher than that of the RHPC electrode (21.0 Wh L^-1 ), which greatly enhanced the practical application potential of RHPC in supercapacitors. Moreover, the yield of RHPC increased 1.2 times by this method, which greatly improved the production capacity and reduced the cost. This research establishes a simple and highly efficient method to improve the volumetric energy density and the yield of lignocellulose-based hierarchical porous carbon.

Hybrid Biochar/Ceria Nanomaterials: Synthesis, Characterization and Activity Assessment for the Persulfate-Induced Degradation of Antibiotic Sulfamethoxazole

Biochar from spent malt rootlets was employed as the template to synthesize hybrid biochar-ceria materials through a wet impregnation method. The materials were tested for the activation of persulfate (SPS) and subsequent degradation of sulfamethoxazole (SMX), a representative antibiotic, in various matrices. Different calcination temperatures in the range 300-500 °C were employed and the resulting materials were characterized by means of N2 adsorption and potentiometric mass titration as well as TGA, XRD, SEM, FTIR, DRS, and Raman spectroscopy. Calcination temperature affects the biochar content and the physicochemical properties of the hybrid materials, which were tested for the degradation of 500 μg L-1 SMX with SPS (in the range 200-500 mg L-1) in various matrices including ultrapure water (UPW), bottled water, wastewater, and UPW spiked with bicarbonate, chloride, or humic acid. Materials calcined at 300-350 °C, with a surface area of ca. 120 m2 g-1, were the most active, yielding ca. 65% SMX degradation after 120 min of reaction in UPW; materials calcined at higher temperatures as well as bare biochar were less active. Degradation decreased with increasing matrix complexity due to the interactions amongst the surface, the contaminant, and the oxidant. Experiments in the presence of scavengers (i.e., methanol, t-butanol, and sodium azide) revealed that sulfate and hydroxyl radicals as well as singlet oxygen were the main oxidative species.

Accessing biochar's porosity using a new low field NMR approach and its impacts on the retention of highly mobile herbicides

Agrowaste biochars [sugarcane straw (SS), rice husk (RH), poultry manure (PM), and sawdust (SW)] were synthesized at different pyrolysis temperatures (350, 450, 550, and 650 °C) to evaluate their potential to retain highly mobile herbicides, such as hexazinone and tebuthiuron that often contaminate water resources around sugarcane plantations. A new low field nuclear magnetic resonance approach based on decay due to diffusion in internal magnetic field (NMR-DDIF) was successfully used to determine biochar's porosity and specific surface area (SSA) to clear the findings of this work. SSA of pores with diameters >5.0 μm increased with pyrolysis temperatures and seemed to dictate biochar's retention, which was >70% of the applied amounts at 650 °C. These macropores appear to act as main arteries for herbicide intra-particle diffusion into smaller pores, thus enhancing herbicides retention. Biochar granulometry had little, but herbicide aging had a significant effect on sorption, mainly of tebuthiuron. However, soils amended with 10,000 kg ha^-1 of the biochars showed low sorption potential. Therefore, higher than usual biochar rates or proper incorporation strategies, i.e., surface incorporation, will be needed to remediate areas contaminated with these highly mobile herbicides, thus precluding their leaching to groundwaters.

Novel insights into the adsorption of organic contaminants by biochar: A review

With rising concerns in the practical application of biochar for the remediation of environment influenced by various organic contaminants, a critical review to facilitate insights the crucial role that biochar has played in wastewater and polluted soil decontamination is urgently needed. This research therefore aimed to describe different intriguing dimensions of biochar interactions with organic contaminants, which including: (i) an introduction of biochar preparation and the related physicochemical properties, (ii) an overview of mechanisms and factors controlling the adsorption of organic contaminants onto biochar, and (iii) a summary of the challenges and an outlook of the further research needs in this issue. In the light of the survey consequences, the appearance of biochar indicates the potential in substituting the existing costly adsorbents, and it has been proved that biochar is one promising adsorbent for organic pollutants adsorption removal from water and soil. However, some research gaps, such as dynamic adsorption, potential environmental risks, interactions between biochar and soil microbes, novel modification techniques, need to be further investigated to facilitate its practical application. This research will be conductive to better understanding the adsorption removal of organic contaminants by biochar.

Pre-pyrolysis metal and base addition catalyzes pore development and improves organic micropollutant adsorption to pine biochar

Biochars were produced from pine feedstock pretreated with aqueous base, NaOH, at pH 9 and 11, and alkali and alkaline earth metals (AAEMs) Na, K, Ca, and Mg at 10^-3 and 1 M. The effects of base and AAEM feedstock pretreatment on biochar surface area, pore size distribution, and adsorption capacity of two organic micropollutants (OMPs), 2,4-dichlorophenoxyacetic acid and sulfamethoxazole, from surface water with background dissolved organic matter (DOM) were evaluated. Base pretreatment significantly increased surface area within micropores (<2 nm diameter). AAEM pretreatment caused pore widening, increasing surface area within pores >2 nm in diameter. The catalytic activity of AAEMs, assessed by generation of non-micropore surface area, decreased in the following order: Ca > K > Na > Mg. All pretreated biochars outperformed untreated biochar for OMP adsorption. Biochar pretreated by aqueous base at pH 11 showed over an order of magnitude increase in OMP adsorption, nearly matching the performance of commercial activated carbon. OMP adsorption from surface water was positively correlated with biochar micropore surface area and negatively correlated with non-micropore surface area, which was linked to higher levels of DOM competition. Base and AAEM pretreatment of biochar feedstocks can increase OMP adsorption for water treatment applications by tuning pore structure and surface area.

Comparative study on polychlorinated biphenyl sorption to activated carbon and biochar and the influence of natural organic matter

The sorption isotherms of polychlorinated biphenyls (PCBs) on carbons (coal based activated carbon named AC and hardwood derived biochar named BC) and natural organic matter (NOM) loaded carbons were examined and carbon-water partition coefficients (K_C-W-PCB) were calculated. The purpose was to accurately predict the effectiveness of in-situ carbon treatments on the sediment impacted with hydrophobic organic chemicals (HOCs). For 1 month sorption, AC K_C-W-PCB values were significantly higher than BC, corresponding to the much larger surface area (particularly in mesopores) for AC. BC K_C-W-PCB values were correlated with PCB total surface area (TSA) and octanol-water partition coefficient (logK_ow). After loading with NOM, AC adsorption to PCBs strongly reduced and the fitted Freundlich exponents (n) decreased with increasing NOM level. However, NOM loading slightly impacted BC sorption and exhibited an opposite effect on BC n values. It is illustrated that the sorption mechanisms are different between AC and BC thereby the influences of NOM on sorption characteristics differ vastly. As the sorption time increased from 1 month to 6 months, an increase is observed in BC sorption extent but simultaneously NOM reduction effect on BC sorption increases, implying that more accurately evaluating BC application as an in-situ sorbent amendment for HOC impacted sediment need further investigation. On the contrary, AC adsorption attenuation caused by NOM coating greatly decreases over time, encouraging AC application as a sediment amendment.

Bioengineered biochar as smart candidate for resource recovery toward circular bio-economy: a review

Biochar's ability to mediate and facilitate microbial contamination degradation, as well as its carbon-sequestration potential, has sparked interest in recent years. The scope, possible advantages (economic and environmental), and future views are all evaluated in this review. We go over the many designed processes that are taking place and show why it is critical to look into biochar production for resource recovery and the role of bioengineered biochar in waste recycling. We concentrate on current breakthroughs in the fields of engineered biochar application techniques to systematically and sustainable technology. As a result, this paper describes the use of biomass for biochar production using various methods, as well as its use as an effective inclusion material to increase performance. The impact of biochar amendments on microbial colonisation, direct interspecies electron transfer, organic load minimization, and buffering maintenance is explored in detail. The majority of organic and inorganic (heavy metals) contaminants in the environment today are caused by human activities, such as mining and the use of chemical fertilizers and pesticides, which can be treated sustainably by using engineered biochar to promote the establishment of a sustainable engineered process by inducing the circular bioeconomy.

New directions and challenges in engineering biologically-enhanced biochar for biological water treatment

Cost-effective, efficient, and sustainable water treatment solutions utilising existing materials and technology will make it easier for low and middle-income countries to adopt them, improving public health. The ability of biochar to mediate and support microbial degradation of contaminants, combined with its carbon-sequestration potential, has attracted attention in recent years. Biochar is a possible candidate for use in cost-effective and sustainable biological water treatment, especially in agrarian economies with easy access to abundant biomass in the form of crop residues and organic wastes. This review evaluates the scope, potential benefits (economic and environmental) and challenges of sustainable biological water treatment using 'Biologically-Enhanced Biochar' or BEB. We discuss the various processes occurring in BEB systems and demonstrate the urgent need to investigate microbial degradation mechanisms. We highlight the need to correlate biochar properties to biofilm development, which can eventually determine process efficiency. We also demonstrate the various opportunities in adopting BEB as a cheaper and more viable alternative in Low and Middle Income Countries and compare it to the current benchmark, 'Biological Activated Carbon'. We focus on the recent advances in the areas of data science, mathematical modelling and molecular biology to systematically and sustainably design BEB filters, unlike the largely empirical design approaches seen in water treatment. 'Sequential biochar systems' are introduced as specially designed end-of-life techniques to lower the environmental impact of BEB filters and examples of their integration into biological water treatment that can fulfil zero waste criteria for BEBs are given.

Physico-chemical and biological treatment strategies for converting municipal wastewater and its residue to resources

An increase in urbanization and industrialization has not only contributed to an improvement in the lifestyle of people, but it has also contributed to a surge in the generation of wastewater. To date, conventional physico-chemical and biological treatment methods are widely used for the treatment of wastewater. However, the efficient operation of these systems require substantial operation and maintenance costs, and the application of novel technologies for the treatment and disposal of sludge/residues. This review paper focuses on the application of different treatment options such as chemical, catalyst-based, thermochemical and biological processes for wastewater or sludge treatment and membrane-based technologies (i.e. pressure-driven and non-pressure driven) for the separation of the recovered products from wastewater and its residues. As evident from the literature, a wide variety of treatment and resource recovery options are possible, both from wastewater and its residues; however, the lack of planning and selecting the most appropriate design (treatment train) to scale up from pilot to the field scale has limited its practical application. The economic feasibility of the selected technologies was critically analyzed and the future research prospects of resource recovery from wastewater have been outlined in this review.

Modern Carbon-Based Materials for Adsorptive Removal of Organic and Inorganic Pollutants from Water and Wastewater

Currently, a serious threat for living organisms and human life in particular, is water contamination with persistent organic and inorganic pollutants. To date, several techniques have been adopted to remove/treat organics and toxic contaminants. Adsorption is one of the most effective and economical methods for this purpose. Generally, porous materials are considered as appropriate adsorbents for water purification. Conventional adsorbents such as activated carbons have a limited possibility of surface modification (texture and functionality), and their adsorption capacity is difficult to control. Therefore, despite the significant progress achieved in the development of the systems for water remediation, there is still a need for novel adsorptive materials with tunable functional characteristics. This review addresses the new trends in the development of new adsorbent materials. Herein, modern carbon-based materials, such as graphene, oxidized carbon, carbon nanotubes, biomass-derived carbonaceous matrices-biochars as well as their composites with metal-organic frameworks (MOFs) and MOF-derived highly-ordered carbons are considered as advanced adsorbents for removal of hazardous organics from drinking water, process water, and leachate. The review is focused on the preparation and modification of these next-generation carbon-based adsorbents and analysis of their adsorption performance including possible adsorption mechanisms. Simultaneously, some weak points of modern carbon-based adsorbents are analyzed as well as the routes to conquer them. For instance, for removal of large quantities of pollutants, the combination of adsorption and other methods, like sedimentation may be recommended. A number of efficient strategies for further enhancing the adsorption performance of the carbon-based adsorbents, in particular, integrating approaches and further rational functionalization, including composing these adsorbents (of two or even three types) can be recommended. The cost reduction and efficient regeneration must also be in the focus of future research endeavors. The targeted optimization of the discussed carbon-based adsorbents associated with detailed studies of the adsorption process, especially, for multicomponent adsorbate solution, will pave a bright avenue for efficient water remediation.

Relative proportions of organic carbon functional groups in biochars as influenced by spectral data collection and processing

Solid-state ¹³C Nuclear Magnetic Resonance (NMR) and synchrotron-based X-ray Absorption Near-Edge Structure (XANES) have applications for determining the relative proportions of organic C functional groups in materials. Spectral data obtained by NMR is typically processed using integration (INTEG) whereas XANES spectral data is typically processed using deconvolution (DECONV). The objective of this study was to examine the impact of spectral data collection and processing on the estimated relative proportions of organic C functional groups in biochars. Biochars showed large variations in aromatic C (45-97%), alkyl C (0-23%), O-alkyl C (1-41%), phenolic C (0-20%) and carboxylic C (0-20%). NMR had a better ability than XANES to differentiate % aromatic C across biochars, and the mean % aromatic C was always greater for NMR-INTEG and NMR-DECONV than for XANES-INTEG or XANES-DECONV. NMR-INTEG showed significant associations with NMR-DECONV and XANES-INTEG for % aromatic C and alkyl C, but there were no significant associations between NMR and XANES for % O-alkyl C, phenolic C and carboxylic C. As well, there was no association between NMR-INTEG and XANES-DECONV for any organic C functional group, and in some cases, spectral data collection and processing influenced the quantification of organic C functional groups in a given biochar to the extent that the differences observed were as large as differences observed between biochars when analyzed using the same spectral data collection and processing technique. We conclude that great caution must be taken when comparing studies that determined organic C functional groups in materials using NMR-INTEG versus XANES-DECONV.