Sorption of lead, copper, cadmium, zinc, and nickel by marine algal biomass: characterization of biosorptive capacity and investigation of mechanisms

Biosorption potential of brown algae, Sargassum polycystum, for the removal of toxic metals, cadmium and zinc

In this research work, the biosorption potential of brown algae, Sargassum polycystum, was investigated for the removal of toxic metals, cadmium (Cd) and zinc (Zn), under controlled environmental conditions. The biosorbent prepared from the S. polycystum was characterized by Brunauer-Emmett-Teller (BET), scanning electron microscope (SEM) and Fourier transform infrared spectroscopy (FTIR) techniques. The optimal conditions identified using Box-Behnken design (BBD) for Cd removal were pH: 4.65, biosorbent mass: 1.8 g/L and shaking speed: 76 rpm. For zinc, the optimum values were pH: 5.7, biosorbent mass: 1.2 g/L and shaking speed: 125 rpm, respectively. The equilibrium uptake of the metals, Cd and Zn, was evaluated by isotherm models. The Langmuir isotherm proved to be an excellent fit confirming single layer of sorption. The maximum Cd and Zn uptakes achieved were 105.26 mg/g and 116.2 mg/g respectively. The kinetics of Cd and Zn biosorption onto brown algae Sargassum polycystum, follows pseudo-second order. The thermodynamic parameters were determined, and the sorption process was found to be feasible. Desorption studies of Cd and Zn were performed, and the bio sorbent reproduced appreciable efficiency for five successive cycles of sorption-desorption process using HCl.

Some Well-Known Alginate and Chitosan Modifications Used in Adsorption: A Review

Owing to environmental pollution and increasingly strict regulations, heavy metals have attracted the attention of many researchers in various disciplines. Alginate and chitosan derivatives have gained popularity as biosorbents for water treatment. An increase in the number of publications on modified biosorbents for the biosorption of toxic compounds reveals widespread interest in examining the requirements and positive contribution of each modification type. This paper reviews the advantages and disadvantages of using alginate and chitosan for adsorption. Well-known modifications based on chitosan and alginate, namely, grafting, functionalization, copolymerization and cross-linking, as well as applications in the field of adsorption processes, especially amino acid functionalization, are reviewed. The selection criteria for the best biosorbents and their effectiveness and proposed mechanism of adsorption are discussed critically. In the conclusion, the question of why these adsorbents need modification before use is addressed.

Nanobioremediation: A sustainable approach for the removal of toxic pollutants from the environment

In recent years, the proportion of organic and inorganic contaminants has increased rapidly due to growing human interference and represents a threat to ecosystems. The removal of these toxic pollutants from the environment is a difficult task. Physical, chemical and biological methods are implemented for the degradation of toxic pollutants from the environment. Among existing technologies, bioremediation in combination with nanotechnology is the most promising and cost-effective method for the removal of pollutants. Numerous studies have shown that exceptional characteristics of nanomaterials such as improved catalysis and adsorption properties as well as high reactivity have been subjects of great interest. There is an emerging trend of employing bacterial, fungal and algal cultures and their components, extracts or biomolecules as catalysts for the sustainable production of nanomaterials. They can serve as facilitators in the bioremediation of toxic compounds by immobilizing or inducing the synthesis of remediating microbial enzymes. Understanding the association between microorganisms, contaminants and nanoparticles (NPs) is of crucial importance. In this review, we focus on the removal of toxic pollutants using the cumulative effects of nanoparticles with microbial technology and their applications in different domains. Besides, we discuss how this novel nanobioremediation technique is significant and contributes towards sustainability.

Ferrofluids and bio-ferrofluids: looking back and stepping forward

Ferrofluids investigated along for about five decades are ultrastable colloidal suspensions of magnetic nanoparticles, which manifest simultaneously fluid and magnetic properties. Their magnetically controllable and tunable feature proved to be from the beginning an extremely fertile ground for a wide range of engineering applications. More recently, biocompatible ferrofluids attracted huge interest and produced a considerable increase of the applicative potential in nanomedicine, biotechnology and environmental protection. This paper offers a brief overview of the most relevant early results and a comprehensive description of recent achievements in ferrofluid synthesis, advanced characterization, as well as the governing equations of ferrohydrodynamics, the most important interfacial phenomena and the flow properties. Finally, it provides an overview of recent advances in tunable and adaptive multifunctional materials derived from ferrofluids and a detailed presentation of the recent progress of applications in the field of sensors and actuators, ferrofluid-driven assembly and manipulation, droplet technology, including droplet generation and control, mechanical actuation, liquid computing and robotics.

Modeling and Optimization of Heavy Metals Biosorption by Low-Cost Sorbents Using Response Surface Methodology

This paper exploits, through modeling and optimization, the experimental laboratory data on the biosorption of heavy metal ions Pb(II), Cd(II), and Zn(II) from aqueous media using soybean and soybean waste biomasses. The biosorption modeling was performed using the Response Surface Methodology, followed by optimization based on numerical methods. The aim of the modeling was to establish the most probable mathematical relationship between the dependent variables (the biosorption efficiency of the biosorbents when adsorbing metal ions, R(%), and the biosorption capacity of sorbents, q(mg/g)) and the process parameters (pH; sorbent dose, DS (g/L); initial metal ion concentration in solution, c0 (mg/L); contact time, tc (min); temperature, T (°C)), validated by methodologies specific to the multiple regression analysis. Afterward, sets of solutions were obtained through optimization that correlate various values of the process parameters to maximize the objective function. These solutions also confirmed the performance of soybean waste biomass in the removal of heavy metal ions from polluted aqueous effluents. The results were validated experimentally.

Trace elements in pelagic Sargassum species in the Mexican Caribbean: Identification of key variables affecting arsenic accumulation in S. fluitans

Since 2014, the Mexican Caribbean beaches have received massive influxes of the brown seaweed Sargassum (S. fluitans III, S. natans I and S. natans VIII), causing serious ecological and economic effects. Concentrations of arsenic (As), cadmium (Cd), copper (Cu), iron (Fe), lead (Pb), and zinc (Zn) were determined over an annual cycle in pelagic Sargassum species from massive influxes into the Mexican Caribbean. The contribution of trace elements, polysaccharides (alginate and fucoidans), and their main functional groups (uronic acids and sulfate) to arsenic content in Sargassum fluitans - the most abundant species in the Sargassum influx - is discussed. Arsenic was recorded in all samples, yielding mean concentrations of 74.2 ± 2.84 mg kg-1. Significant differences were found between species for As, Cu, Fe, and Pb, but not for Cd and Zn; also, S. fluitans showed significant differences in metal content between seasons for all elements, as well as in alginate and uronic acids from fucoidan. The season of the year, copper, iron, uronic acids, and sulfate content in fucoidan were the main variables associated with arsenic accumulation in S. fluitans as evidenced with a Generalized Linear Model. Arsenic content in Sargassum biomass exceeded the maximum allowable level in the rainy season; therefore, the content of this trace element should be carefully monitored for safe usage of Sargassum biomass.

Distribution, behavior and budget of Pb in suspended particles in the Changjiang Estuary and adjacent east China sea

Content, isotopes and budget of Pb in suspended particulate matter (SPM) in the Changjiang Estuary and adjacent East China Sea (ECS) were determined to investigate the biogeochemical cycling of particulate Pb in coastal sea. The content of particulate Pb ranged from 11.3 to 669.4 μg/g in February (winter) and from 20.1 to 79.4 μg/g in August (summer). Except in surface water, particulate Pb content in August is higher than that in February. In lower water, particulate Pb and Th and SPM all decreased gradually from the estuary towards the sea, indicating their lithogenic origin from the Changjiang River. Particulate Pb displayed abnormally high concentration in February surface water, resulting from the atmospheric deposition of anthropogenic Pb in winter. ²⁰⁸Pb/²⁰⁶Pb and ²⁰⁷Pb/²⁰⁶Pb in surface water north to the estuary were higher than background values, suggesting anthropogenic disturbance of Pb. Particulate Pb content in the Changjiang River and the estuary had increased by 77-78% from the 1980s to 2016 due to pollution. Pb was also scavenged by organic matter, leading to higher Pb content in waters with high productivity. Budget of particulate Pb in the northern ECS was established. The Changjiang River contributed 97.0% and 58.1% of particulate Pb input in summer and winter half year, respectively. 88.8% of particulate Pb was deposited in the estuary and adjacent coastal sea in summer but 88.7% was exported with southward coastal currents in winter.

Mechanistic insights into soil heavy metals desorption by biodegradable polyelectrolyte under electric field

In this study, we firstly used alginate to enhance an electrokinetic technology to remediate soil contaminated with divalent heavy metals (Pb²⁺, Cu²⁺, Zn²⁺). The mechanisms of alginate-associated migration of metal ions in electric field were confirmed. Alginate resulted in a high electrical current during electrokinetic process, and soil conductivity also increased after remediation. Obvious changes in both electroosmotic flow and soil pH were observed. Moreover, these factors were affected by increasing alginate dosage. The highest Cu (95.82%) and Zn (97.33%) removal efficiencies were obtained by introducing 1 wt% alginate. Alginate can desorb Cu²⁺ and Zn²⁺ ions from soil by forming unstable gels, which could be dissociated through electrolysis. However, Pb²⁺ ions did not easily migrate out of the contaminated soil. The density functional theory (DFT) calculations show Pb²⁺ ions could form a more stable coordination sphere in metal complexes than Cu²⁺ and Zn²⁺ ions. The metal removal efficiency was decreased by increasing alginate dosage at a high level. More alginate could provide more carboxyl ligands for divalent metal ions to stabilize gels, which were difficult to dissociate by electrolysis. In summary, the results indicate it is potential for introducing alginate into an electrokinetic system to remediate Cu- and Zn- contaminated soil.

Novel Thermosensitive-co-Zwitterionic Sulfobetaine Gels for Metal Ion Removal: Synthesis and Characterization

Zwitterionic betaine polymers are promising adsorbents for the removal of heavy metal ions from industrial effluents. Although the presence of both negative and positively charged groups imparts them the ability to simultaneously remove cations and anions, intra- and/or inter-chain interactions can significantly reduce their adsorption efficiencies. Therefore, in this study, novel gels based on crosslinked co-polymers of thermosensitive N-isopropylacrylamide (NIPAAM) and zwitterionic sulfobetaine N,N-dimethylacrylamido propyl ammonium propane sulfonate (DMAAPS) were synthesized, characterized, and evaluated for ion removal. Fourier-transform infrared (FTIR) and proton nuclear magnetic resonance (1H NMR) analyses confirmed the success of the co-polymerization of NIPAAM and DMAAPS to form poly(NIPAAM-co-DMAAPS). The phase transition temperature of the co-polymer increased with increasing DMAAPS content in the co-polymer, indicating temperature-dependent amphiphilic behavior, as evidenced by contact angle measurements. The ion adsorption analyses of the poly(NIPAAM-co-DMAAPS) gels indicated that co-polymerization increased the molecular distance and weakened the interaction between the DMAAPS-charged groups (SO3- and N+), thereby increasing the ion adsorption. The results confirmed that, with a low concentration of DMAAPS in the co-polymer gels (~10%), the maximum amount of Cr3+ ions adsorbed onto the gel was ~58.49% of the sulfonate content in the gel.

Efficacy of Alkaline-Treated Soy Waste Biomass for the Removal of Heavy-Metal Ions and Opportunities for Their Recovery

In this study, soy waste biomass (SW) resulting from oil extraction was treated with alkaline solution, and the obtained material (Na-SW) was used as biosorbent for the removal of Pb(II), Cd(II), and Zn(II) ions from aqueous media. The performance of this biosorbent was examined in batch systems, at different initial metal ion concentrations and contact times (pH 3.4; 5 g of biosorbent/L). Isotherm and kinetic modeling was used to calculate the equilibrium and kinetics of the biosorption processes. The maximum biosorption capacity, calculated from the Langmuir isotherm model, followed the order Zn(II) (0.49 mmol/g) > Cd(II) (0.41 mmol/g) ≈ Pb(II) (0.40 mmol/g), while the kinetics of biosorption processes fit the pseudo-second-order model. Three cycles of biosorption/desorption were performed to estimate the reusability of Na-SW biosorbent, and the regeneration efficiency was higher than 97% in all cases. The practical applicability of Na-SW biosorbent in treating of wastewater contaminated with Pb(II), Cd(II), and Zn(II) ions was examined using simulated wastewater samples, and the main quality characteristics of the effluents obtained after treatment were evaluated. All these aspects highlight the potential applicability of Na-SW for large-scale wastewater treatment.

Removal of Toxic Heavy Metals from Contaminated Aqueous Solutions Using Seaweeds: A Review

Heavy metal contamination affects lives with concomitant environmental pollution, and seaweed has emerged as a remedy with the ability to save the ecosystem, due to its eco-friendliness, affordability, availability, and effective metal ion removal rate. Heavy metals are intrinsic toxicants that are known to induce damage to multiple organs, especially when subjected to excess exposure. With respect to these growing concerns, this review presents the preferred sorption material among the many natural sorption materials. The use of seaweeds to treat contaminated solutions has demonstrated outstanding results when compared to other materials. The sorption of metal ions using dead seaweed biomass offers a comparative advantage over other natural sorption materials. This article summarizes the impact of heavy metals on the environment, and why dead seaweed biomass is regarded as the leading remediation material among the available materials. This article also showcases the biosorption mechanism of dead seaweed biomass and its effectiveness as a useful, cheap, and affordable bioremediation material.

Development of a continuous fixed-bed column to eliminate cadmium(II) ions by starch-g-poly(acrylic acid)/cellulose nanofiber bio-nanocomposite hydrogel

This paper presents an experimental study on continuous adsorptive removal of Cd²⁺ from the water body using a bio-nanocomposite hydrogel within a fixed-bed column (FBC) system. The bio-nanocomposite hydrogel was synthesized based on starch grafted poly(acrylic acid) (St-g-PAA) reinforced by cellulose nanofibers (CNFs). The effects of processing conditions including pH, flow rate, and initial concentration of Cd²⁺ on adsorption efficiency were examined. Based on the results, the highest removal efficiency was achieved to be 82.5% at pH of 5, initial concentration of 10 mg L^-1, and flow rate of 5 mL min^-1. Furthermore, by applying isotherm models, it was uncovered that the Langmuir isotherm model was the most appropriate one, and the maximum adsorption capacity was 40.65 mg g^-1. Also, an adsorption process was carried out using the FBC system, and the outcome data were processed using Thomas and Yoon-Nelson models to find the characteristics of the column. In this study, the recovering capacity of the exhausted hydrogel was evaluated. Desorption process efficiencies of batch and continuous operations were obtained to be 91.9% and 90%, respectively.

Simultaneous removal of Zn2+ and p-nitrophenol from wastewater using nanocomposites of montmorillonite with alkyl-ammonium and complexant

Three types of alkyl-ammonium with different branching chains and three complexants with different functional groups were used to prepare alkyl-ammonium or complexant intercalated montmorillonite nanocomposite (A-Mt or C-Mt). In addition, synergistic intercalated montmorillonite nanocomposites (A/C-Mt) with alkyl-ammonium along with complexant were also prepared. The adsorption performance of the various nanocomposites toward Zn²⁺ and p-nitrophenol (PNP) from simulated binary wastewater containing both Zn²⁺ and PNP were systematically investigated. Characterization of Mt nanocomposites showed that both alkyl-ammoniums and complexants were successfully intercalated into the interlayers of Mt. The surfactant loading amounts of the various nanocomposites were also determined and correlated with the resulting expansion of the interlayer spacing. It was found that intercalation of alkane (OTAC) and -SH (CSH) were conducive to the adsorption of Zn²⁺ while -C₂H₄NH (TETA) and all alkyl-ammoniums were beneficial for PNP adsorption. The extent of adsorption was found to be controlled primarily by pH, i.e., the higher pH had a good effect on the adsorption of both Zn²⁺ and PNP. The adsorption process of Zn²⁺ onto Mt nanocomposites was more in line with the Freundlich model (R² = 0.99), while the Langmuir model described the adsorption of PNP well (R² = 0.99). The adsorption kinetics could be well described by the Elovich equation (R² = 0.98) and the double-constant model (R² = 0.89). Chemical adsorption was determined to be the dominant process between the contaminant and Mt nanocomposite surfaces.

The cell wall of green microalgae and its role in heavy metal removal

Heavy metals in industrial wastewaters are posing a serious threat to the environment and to human health. Microalgae are increasingly being seen as potential solutions to this problem as they can remove pollutants through biosorption. This process offers certain advantages over other more traditional metal removal techniques as it is simple, inexpensive, eco-friendly, and can be performed over a wide range of experimental conditions. Biosorption is possible due to the unique and complex structure of the microalgal cell wall. The variety of functional groups on the surface of the cell wall (such as carboxyl or amino groups) can act as binding sites for the heavy metals, thus removing them from the environment. This review focuses on the cell wall composition and structure of the most commonly used microalgae in heavy metal removal and shows the role of their cell wall in the biosorption process. This review also aims to report the most commonly used models to predict the velocity of microalgal biosorption and the removal capacities.

Advancement of green technologies: A comprehensive review on the potential application of microalgae biomass

Microalgae have drawn significant interest worldwide, owing to their enormous application potential in the green energy, biopharmaceutical, and nutraceutical industries. Many studies have proved and stated the potential of microalgae in the area of biofuel which is economically effective and environmentally friendly. Besides the commercial value, the potential of microalgae in environmental protection has also been investigated. Microalgae-based process is one of the most effective way to treat heavy metal pollution, compared to conventional methods, it does not release any toxic waste or harmful gases, and the aquatic organism will not receive any harmful effects. The potential dual role of microalge in phytoremedation and energy production has made it widely explored for its capability. The interest of microalgae in various application has motivated a new focus in green technologies. Considering the rapid population growth with the continuous increase on the global demand and the application of biomass in diverse field, significant upgrades have been performed to accommodate green technological advancement. In the past decade, noteworthy advancement has been made on the technology involving the diverse application of microalgae biomass. This review aims to explore on the application of microalgae and the development of green technology in various application for microalgae biomass. There is great prospects for researchers in this field to delve into other potential utilization of microalgae biomass not only for bioremediation process but also to generate revenues from microalgae by incorporating clean and green technology for long-term sustainability and environmental benefits.

Bioremediation of heavy metals from wastewater: a current perspective on microalgae-based future

Heavy metals-containing drinking water and wastewater are posing a severe threat to the environment, and living beings on land, air and water. Different conventional, advanced nanomaterials-based and biological method has been employed for the treatment of heavy metals. Among the biological methods, microalgae are an important group of micro-organisms that have numerous environmental applications and can remediate heavy metals from wastewater. Also, it has numerous advantages over conventional remediation processes. Microalgae cells can uptake the heavy metal via different physiological and biological methods and are utilized as a nutrient source to regulate its metabolic process for the production of biomass. Furthermore, the enhancement in heavy metal removal efficiency can be improved using different strategies such as immobilization of algal cells, development of algal consortia and designing of microalgae-based nanocomposite materials. Also, it can significantly contribute towards environmental sustainability and future. Thus, the review provides a critical overview of heavy metals and their existence along with their negative effects on humans. This review provides insight on recent advanced nanomaterial approaches for the removal of heavy metals, overviews of microalgae-based heavy metal uptake mechanisms and their potential for the amputation of different heavy metals. Furthermore, the special focus is on recent strategies that enhance heavy metal removal efficiency and contribute towards sustainability for the development of a microalgae-based future.

Modeling and optimization of process parameters of biofilm reactor for wastewater treatment

The efficiency of heavy metal in biofilm reactors depends on absorption process parameters, and those relationships are complicated. This study explores artificial neural networks (ANNs) feasibility to correlate the biofilm reactor process parameters with absorption efficiency. The heavy metal removal and turbidity were modeled as a function of five process parameters, namely pH, temperature(°C), feed flux(ml/min), substrate flow(ml/min), and hydraulic retention time(h). We developed a standalone ANN software for predicting and analyzing the absorption process in handling industrial wastewater. The model was tested extensively to confirm that the predictions are reasonable in the context of the absorption kinetics principles. The model predictions showed that the temperature and pH values are the most influential parameters affecting absorption efficiency and turbidity.

Biosorption of heavy metal ions by green alga Neochloris oleoabundans: Effects of metal ion properties and cell wall structure

Effects of metal ion proprieties and the cell wall structure of green alga Neochloris oleoabundans were investigated on five strategically selected heavy metal ions, Pb(II), Hg(II), Zn(II), Cd(II) and Cu(II). The biosorption of these ions were energy-independent and spontaneous Langmuir adsorption. The adsorption capacities of Pb(II), Hg(II), Zn(II), Cd(II) and Cu(II) were determined to be 1.03, 0.91, 1.20, 0.65 and 1.23 mmol/g, respectively. Data suggest that peptide-containing molecules and non-cellulosic polysaccharides on cell wall were the primary sites of adsorption. Ion Pb(II) showed the strongest inhibitive effects on the adsorption of other metal ions on cells in binaries, corresponding to its large affinity to the biosorbents, which was next only to that of Cu(II). A linear relation was established for the first time between the adsorption capacity and the impact factor, which is defined in this paper as the electronegativity of a metal ion normalized by its atomic radius. In other words, adsorption capacity of N. oleoabundans biomass to the tested two-valence metal ions is proportional to the electronegativity and inversely proportional to the radius of the metal ions. Cell aggregation was caused by the addition of Cu(II), which exhibited distinctive adsorption behaviors than other metal ions.

Phycoremediation and photosynthetic toxicity assessment of lead by two freshwater microalgae Scenedesmus acutus and Chlorella pyrenoidosa

Heavy metal (HM) pollution is a serious agro-economic concern and algae can be used as one of the bioremediating agents as it can grow in different water bodies. In this study, the Scenedesmus acutus and Chlorella pyrenoidosa were exposed to various concentrations of Pb²⁺ for 96 h and a multidimensional toxicity assessment has been performed by pulse amplitude modulation technique and Fourier transform infrared spectroscopy (FTIR). High-angle annular dark-field scanning transmission electron microscopy coupled energy dispersive spectroscopy (HAADF-S/TEM-EDS) detected intracellular localization of Pb²⁺ , thus confirming algal bio-accumulation abilities. Sensitivity assay demonstrated that 500 and 400 ppm of Pb²⁺ as minimum inhibitory concentrations (MIC50) for S. acutus and C. pyrenoidosa, respectively, which inhibited growth (OD) by >50% in 96 h. During bioremoval studies, S. acutus and C. pyrenoidosa were found to remove ∼52 and ∼32% of total Pb²⁺ , respectively. The particulate analysis of Pb²⁺ by ICP-OES showed >99.5% biosorption capacity by both the species. The biomass characterization by FTIR showed the involvement of various cell wall functional groups such as hydroxyl, alkane, and C=C groups in the biosorption of Pb²⁺ by both the species. The noninvasive chlorophyll fluorescence techniques provide a quick insight on heavy metal stress and can be adapted as a rapid detection tool to study the Pb²⁺ stress. S. acutus strain showed higher tolerance and higher bioremoval capacity than C. pyrenoidosa. However, both the species can be exploited for biosorption of Pb²⁺ from aquatic streams as an alternative way for low cost Pb²⁺ recovery systems.

Towards a Circular Economy: Analysis of the Use of Biowaste as Biosorbent for the Removal of Heavy Metals

Industrial human activity has led to the release of substantial amounts of heavy metals into the environment. Contamination of water with heavy metals such as lead, cadmium, copper, zinc, chromium, or nickel represents a serious problem. As part of the circular economy, it is appropriate to use biowaste from agriculture, fisheries, and the timber industry as biosorbents. In this literature review, the potential of using these biowaste groups as biosorbents for metal removal is presented. This biowaste is characterized by the presence of carboxyl, hydroxyl, carbonyl, amide, amine, sulfydryl, and other groups on their surface, which form complexes and chelates with metals present in water. Biosorption seems to be a potential alternative to conventional technologies for removing or recovering heavy metals from water or wastewater, which are uneconomical and generate additional waste. The paper demonstrates that harnessing the potential of biowaste to remove metals is beneficial to the environment as they can solve the problem of incineration and realise recycling that meets the circular economy. Although the choice of a suitable biosorbent for the removal of a particular metal involves a lot of research, the high biosorption efficiency, low cost, and renewability justify their use.

Sustainable removal of cadmium from contaminated water using green alga - Optimization, characterization and modeling studies

This research study reported the feasibility of cadmium removal using green algae, Caulerpa scalpelliformis, under controlled environmental conditions. The algal biosorbent could effectively remove cadmium under broad range of test conditions, namely, initial pH (3-6), adsorbent mass (0.5-2.5 gL^-1) and shaking speed (60-100 rpm). The best operating conditions were identified using Central Composite Design under Response Surface methodology and found to be pH - 4.9, adsorbent mass - 2.1 gL^-1 and shaking speed - 90 rpm. Equilibrium studies were conducted and monolayer sorption was identified as the mechanism, confirmed by Langmuir isotherm (R² = 0.9920). The maximum Cd uptake achieved at optimal conditions was 111.11 mg g^-1. The kinetic constants of the best fit model (pseudo second order) were determined. The thermodynamic feasibility was verified (ΔG ^ͦ < 0) and the biosorption process was found to be endothermic (ΔH ^ͦ > 0). The mass transfer studies shows that the mass transfer coefficient was inversely related to the temperature. Presence of favorable surface functional groups and enhanced surface area confirmed the suitability of the synthesized biosorbent for effective removal of cadmium.

Bioadsorbents from algae residues for heavy metal ions adsorption: chemical modification, adsorption behaviour and mechanism

Biosorption is an emerging technology for the removal of heavy metals from industrial wastewater by natural or modified biomass. In this study, we proposed a novel protocol for making full use of seaweeds. Brown seaweed Sargassum carpophyllum residue (SCR) and green seaweed Caulerpa lentillifera residue (CLR) were obtained after extraction of the bioactive polysaccharides. The obtained residues were further chemical modified by butanedioic anhydride to obtained respective carboxylated product, named CSCR and CCLR. According to the titration results, CSCR and CCLR contained 2.77 and 2.12 mmol/g of carboxyl group. After modification, the adsorption capacity for metal ions increased by 3-6 times. The adsorption capacity of CSCR for Cu²⁺, Pb²⁺, Cd²⁺ and Mn²⁺ was 52.37, 107.11, 85.62, and 43.52 mg/g, and that of CCLR was 78.10, 108.80, 87.30 and 57.80 mg/g, respectively. The adsorption was well described by the pseudo-second-order kinetic model and Langmuir adsorption isotherm equation.

A review on mechanism of biomineralization using microbial-induced precipitation for immobilizing lead ions

Lead (Pb) is a toxic metal originating from natural processes and anthropogenic activities such as coal power plants, mining, waste gas fuel, leather whipping, paint, and battery factories, which has adverse effects on the ecosystem and the health of human beings. Hence, the studies about investigating the remediation of Pb pollution have aroused extensive attention. Microbial remediation has the advantages of lower cost, higher efficiency, and less impact on the environment. This paper represented a review on the mechanism of biomineralization using microbial-induced precipitation for immobilizing Pb(II), including microbial-induced carbonate precipitation (MICP), microbial-induced phosphate precipitation (MIPP), and direct mineralization. The main mechanisms including biosorption, bioaccumulation, complexation, and biomineralization could decrease Pb(II) concentrations and convert exchangeable state into less toxic residual state. We also discuss the factors that govern methods for the bioremediation of Pb such as microbe characteristics, pH, temperature, and humic substances. Based on the above reviews, we provide a scientific basis for the remediation performance of microbial-induced precipitation technique and theoretical guidance for the application of Pb(II) remediation in soils and wastewater.

Analysis of Minerals and Heavy Metals Using ICP-OES and FTIR Techniques in Two Red Seaweeds (Gymnogongrus griffithsiae and Asparagopsis taxiformis) from Tunisia

In this study, the mineral and heavy metals (arsenic (As), cadmium (Cd), copper (Cu), iron (Fe), mercury (Hg), potassium (K), manganese (Mn), sodium (Na), phosphorus (P), and lead (Pb)) in two red Tunisian seaweeds Gymnogongrus griffithsiae (G. griffithsiae) and Asparagopsis taxiformis (A. taxiformis), were evaluated. Mineral and trace element analyses were achieved using inductively coupled plasma optical emission spectrometry (ICP-OES). Fourier transform infrared (FTIR) spectroscopy was used to predict the major functional groups that would be implicated in the seaweeds mineral uptake. Our results showed that the studied A. taxiformis species had much higher mineral and heavy metal concentrations than G. griffithsiae. Na (200.60 mg/kg) was the most abundant element followed by K (137.84 mg/kg) > P (35.93 mg/kg) for A. taxiformis species. However, only Na (165.23 mg/kg) and P (51.19 mg/kg) were detected in G. griffithsiae alga. As regards heavy and toxic metals, allowable concentrations have been found in both seaweeds. The concentration ranges for the most undesirable heavy metals were as follows: Pb (0.39-0.51 mg/kg), As (0.11-0.40 mg/kg), Cd (0.01-0.02 mg/kg), and Hg (0.00-0.02 mg/kg). According to FTIR analysis, the major functional groups present in the studied seaweeds were carboxyl, hydroxyl, sulfate, and phosphate groups that are considered as excellent binding sites for metal retention.

Adsorption-desorption of phenolic compounds from olive mill wastewater using a novel low-cost biosorbent

Several materials have been investigated for the adsorption of olive mill wastewater phenolic compounds. However, researchers have focused on the development of novel, low-cost, with high adsorption capacity adsorbents, originated from the food industry as by-products. The aim of this work was the investigation of the effectiveness of a juice industry by-product, pomegranate seed, for the adsorption of olive mill wastewater phenols. Furthermore, chemical activation and thermal activation of the adsorbent took place in order to improve total phenols uptake and afterwards, desorption process in hydrochloric acid was studied. After the determination of equilibrium time, the effects of temperature (20-60 °C), solution's pH (4.0-8.0), initial sorbate concentration (50-500 mg/L), sorbent mass concentration (0.01-0.05 g/mL OMW), and sorbent particle size (0.149-1.180 mm) on adsorption yield were studied performing batch experiments. The maximum phenols uptake observed was 92.8% after 10 min, at 30 °C and a pH of 5.0, with an initial sorbate concentration of 162.5 mg/L, a sorbent mass concentration of 0.02 g/mL, and a sorbent particle size of 0.922 mm. Langmuir, Freundlich, and Temkin isotherms were developed for the equilibrium description, while pseudo-first-order, pseudo-second-order, and intra-particle diffusion models were applied to investigate adsorption kinetics. The experimental data were best fitted to the Langmuir model, whereas the kinetic data followed the pseudo-first-order kinetic model. The results of the study were promising indicating that pomegranate seed could be used as a novel and low-cost biosorbent. Graphical abstract.

Understanding mechanisms in the adsorption of lead and copper ions on chili seed waste in single and multicomponent systems: a combined experimental and computational study

In the current work, a deep study to understand the adsorption phenomena occurring in single and multicomponent systems was conducted by using spectroscopic characterization, and computational tools. The experimental results showed that the adsorption capacity of chili seed is higher for Pb2+ (48 mg/g) than Cu2+ (4.1 mg/g) ions in single systems. However, the adsorption study in multicomponent systems provides important conclusions of the concentration effect of the metal ions, showing a significant antagonistic and competitive effect of both ions under equivalent concentrations of them (qPb2+ is 56% reduced) or high concentration of Pb2+ (qCu2+ is 50% reduced). Computational results correlated well with the experimental ones and evidenced all interactions proposed from spectroscopy results, accounting for the occurrence of complexation and electrostatic mechanisms between metal ions and the surface oxygenated functional groups (hydroxyl, carboxyl, and carboxylate) onto chili seed. Chemistry quantum descriptors supported the reactivity behavior of the chemical species implicated. All results evidenced that Pb2+ and Cu2+ adsorption on chili seed surface is governed by the occurrence of combined ionic exchange, π-interaction, complexation, and electrostatic attraction.

Tunable magnetothermal properties of cobalt-doped magnetite-carboxymethylcellulose ferrofluids: smart nanoplatforms for potential magnetic hyperthermia applications in cancer therapy

Magnetite nanoparticles are one of the most promising ferrofluids for hyperthermia applications due to the combination of unique physicochemical and magnetic properties. In this study, we designed and produced superparamagnetic ferrofluids composed of magnetite (Fe3O4, MION) and cobalt-doped magnetite (Co x -MION, x = 3, 5, and 10% mol of cobalt) nanoconjugates through an eco-friendly aqueous method using carboxymethylcellulose (CMC) as the biocompatible macromolecular ligand. The effect of the gradual increase of cobalt content in Fe3O4 nanocolloids was investigated in-depth using XRD, XRF, XPS, FTIR, DLS, zeta potential, EMR, and VSM analyses. Additionally, the cytotoxicity of these nanoconjugates and their ability to cause cancer cell death through heat induction were evaluated by MTT assays in vitro. The results demonstrated that the progressive substitution of Co in the magnetite host material significantly affected the magnetic anisotropy properties of the ferrofluids. Therefore, Co-doped ferrite (Co x Fe(3-x)O4) nanoconjugates enhanced the cell-killing activities in magnetic hyperthermia experiments under alternating magnetic field performed with human brain cancer cells (U87). On the other hand, the Co-doping process retained the pristine inverse spinel crystalline structure of MIONs, and it has not significantly altered the average nanoparticle size (ca.∼7.1 ± 1.6 nm). Thus, the incorporation of cobalt into magnetite-polymer nanostructures may constitute a smart strategy for tuning their magnetothermal capability towards cancer therapy by heat generation.

An Amberlite IRA-400 Cl- ion-exchange resin modified with Prosopis juliflora seeds as an efficient Pb2+ adsorbent: adsorption, kinetics, thermodynamics, and computational modeling studies by density functional theory

A Prosopis juliflora-seed-modified Amberlite IRA-400 Cl- ion-exchange resin (hereafter denoted as SMA resin) is used for the removal of Pb2+ from wastewater. SEM, EDX, FT-IR, BET, XRD, and XPS analyses were used to characterize the SMA resin. Parameters such as Pb2+ concentration, pH, temperature, and time are optimized. The obtained results show that the SMA resin has high efficiency for the removal of Pb2+ (73.45%) at a concentration of 100 mg L-1 and a dosage of 0.01 g at pH 6. Thermodynamic studies indicate that the adsorption was spontaneous with negative ΔH° and ΔS° values at all temperatures; pseudo-second-order kinetics and the Langmuir adsorption isotherm provided the best fit (q max = 106 mg g-1 and R 2 = 0.99) from 298 to 338 K. In addition, a diffusion-controlled mechanism at 298 K was observed from intra-particle studies. A desorption and recovery process has been applied successfully to the SMA adsorbent. The obtained results showed desorption of 90.7% at pH 2.5 with 86.3% recovery over six cycles. Furthermore, the DFT results suggest that all the functional groups of the SMA resin possibly bind with Pb2+ and, of these, the -C[double bond, length as m-dash]O group shows the highest binding energy towards Pb2+. Moreover, the high-efficiency removal of Pb2+ from synthetic wastewater using the proposed SMA resin was demonstrated to show the real-life application potential.

How marine diatoms cope with metal challenge: Insights from the morphotype-dependent metal tolerance in Phaeodactylum tricornutum

Metal tolerance in marine diatoms vary between morphotypes, strains, and species due to their long-term adaptations to stochastic environments. The mechanisms underlying this highly variable trait remain a matter of interest in ecotoxicology. In this study, we used several cutting-edge techniques, including a non-invasive micro-test technique, atomic force microscopy, and X-ray photoelectron spectroscopy to examine cadmium (Cd) accumulation and tolerance in the three morphotypes of Phaeodactylum tricornutum. Subcellular Cd distribution, metal transporter expression, and glutathione and phytochelatin activity were also analyzed to characterize the morphology-dependent Cd homeostasis and detoxification. We found that the oval morphotype accumulated more Cd, but was also more Cd tolerant than the other morphotypes. The greater surface binding of Cd to the oval morphotype is attributable to its smaller spherical form, rougher cell surface, and lower surface potential. Moreover, the oval morphotype was less permeable to Cd ions and contained higher phytochelatin and glutathione levels, which explained its higher metal tolerance. Our study offers new explanations for diatom's adaptations to changing environments that may contribute to its evolutionary success.

Acute effects of CH3NH3PbI3 perovskite on Scenedesmus obliquus and Daphnia magana in aquatic environment

CH₃NH₃PbI₃ is one of the most widely studied and most promising photoelectric conversion materials for large-scale application. However, once it is discharged into the aquatic environment, it will release a variety of lethal substances to the aquatic organisms. Herein, two typical aquatic pollution indicators, Scenedesmus obliquus (a typical phytoplankton) and Daphnia magna (a typical zooplankton), were used to assess the acute effects of CH₃NH₃PbI₃ perovskite on aquatic organisms. The results showed that, when the initial CH₃NH₃PbI₃ perovskite level (CPL) was 40 mg L^-1 or higher, the growth of S. obliquus would be remarkably inhibited with significant decreases of chlorophyll content and protein content. And when the CPL was over 5 mg L^-1, the survival of D. magna would be notably threatened. Specifically, the 72 h EC-50 of CH₃NH₃PbI₃ perovskite to S. obliquus was calculated as 37.21 mg L^-1, and the 24 h LC-50 of this perovskite to D. magna adults and neonates were calculated as 37.53 mg L^-1 and 18.55 mg L^-1, respectively. Moreover, remarkably solution pH declination and large amounts of lead bio-accumulation was observed in the both acute experiments, which could be the main reasons causing the above acute effects. Considering the strong acute effects of these CH₃NH₃PbI₃ perovskite materials and their attractive application prospect, more attentions should be paid on their harmness to the environment.

How natural materials remove heavy metals from water: mechanistic insights from molecular dynamics simulations

Water pollution by heavy metals is of increasing concern due to its devastating effects on the environment and on human health. For the removal of heavy metals from water sources, natural materials, such as spent-coffee-grains or orange/banana/chestnut peels, appear to offer a potential cheap alternative to more sophisticated and costly technologies currently in use. However, in order to employ them effectively, it is necessary to gain a deeper understanding – at the molecular level – of the heavy metals-bioorganic-water system and exploit the power of computer simulations. As a step in this direction, we investigate via atomistic simulations the capture of lead ions from water by hemicellulose – the latter being representative of the polysaccharides that are common components of vegetables and fruit peels − as well as the reverse process. A series of independent molecular dynamics simulations, both classical and ab initio, reveals a coherent scenario which is consistent with what one would expect of an efficient capture, i.e. that it be fast and irreversible: (i) binding of the metal ions via adsorption is found to happen spontaneously on both carboxylate and hydroxide functional groups; (ii) in contrast, metal ion desorption, leading to solvation in water, involves sizable free-energy barriers.

We investigate via atomistic simulations the capture of lead ions from water by hemicellulose – as representative of the polysaccharides that are common components of vegetables and fruit peels – and the reverse process.

Recyclable aqueous metal adsorbent: Synthesis and Cu(II) sorption characteristics of ternary nanocomposites of Fe3O4 nanoparticles@graphene-poly-N-phenylglycine nanofibers

Metal pollutant adsorbents are an essential material platform for sustainable environmental remediation, but the adsorbents are typically disposable after sorption, which secondarily contaminates the environment. We report on recyclable Cu(II) adsorbent of deprotonated poly-N-phenylglycine nanofibers (d-PPG NFs)-grafted reduced graphene oxide (rGO) sheets intercalated with Fe₃O₄ nanoparticles (NPs), which are synthesized via wet chemical process. The adsorption performances of ternary Fe₃O₄ NPs@rGO-d-PPG NFs and binary Fe₃O₄ NPs@rGO composites are compared, and the ternary ones exhibit much higher Cu²⁺-adsorption capacity than binary ones under diverse pH conditions due to both high specific surface area and high cationic affinity of d-PPG NFs that follow the Freundlich adsorption model. Density-functional theory calculation results explain why/how the ternary composites show greater Cu²⁺ adsorption capability in higher pH environment. The ternary composites present stable, high Cu²⁺ adsorption capability, irrespective of Co²⁺ concentration in bimetallic Cu and Co aqueous solution. The Fe₃O₄ NPs in the ternary composites allow magnet-assisted collection after adsorption batches, whose collection yield is ∼95 % without adsorption capacity degradation in repeated adsorbent reuses over 10 times. This study provides a general, promising pathway to synthesize reusable sorptive materials for water purification/remediation.

The removal of copper and zinc from swine wastewater by anaerobic biological-chemical process: Performance and mechanism

Copper and zinc are often used as feed additives and frequently detected in swine wastewater. Anaerobic granular sludge (AnGS) plays an important role in high-rate anaerobic methanation biotechnologies which are widely applied to treat swine wastewater. The removal of Cu²⁺ and Zn²⁺ by AnGS was investigated in the batch and continuous systems. The results of batch experiments showed the adsorption by AnGS could be a significant method for Cu²⁺ and Zn²⁺ removal with efficiencies of 99 % and 49 % respectively. The sulfide precipitation mediated by AnGS could be another significant pathway for Zn²⁺ removal with efficiency of 18-27 % in Protein/M²⁺ experiments and 16-46 % in SO₄^2-/M²⁺ experiments (M²⁺ represents the total concentration of Cu²⁺ and Zn²⁺). The results of continuous experiment showed, with SO₄^2-/M²⁺ larger than 1.5, the influent Cu²⁺ and Zn²⁺ could be effectively removed in an anaerobic methanation bioreactor and its effluent Cu²⁺and Zn²⁺concentrations were below 1 mg/L and 2 mg/L separately. The main removal mechanism of Cu²⁺and Zn²⁺ in the anaerobic methanation system was that the biological production of sulfide from sulfate was followed by chemical precipitation and reduction. It is helpful for the removal of Cu²⁺ and Zn²⁺ with organic pollutants simultaneously to eliminate environmental risk of swine wastewater.

Characterization and utilization of Sargassum linifolium and Stypopodium schimperi polysaccharides as blue inhibitors for steel electo-polishing

Different polysaccharide extracts (crude polysaccharide, fucoidan and alginate) from Sargassum linifolium and Stypopodium schimperi were examined as inhibitors of the carbon steel anodic dissolution process in 8 M phosphoric acid. The anode potential and limiting current relationship was measured and compared for gradually increasing algae extract concentrations (from 20 to 350 ppm). The limiting current decreases while inhibition efficiency (%) increases as the concentrations of all these extracts increase. Fucoidan from S. linifolium is considered to have the most retardation effect. The extracts' retardation mechanism is depending on the adsorption process at the steel metal, which was proved by scanning electron microscopy (SEM). Also, SEM shows that high concentration (350 ppm) of Stypopodium schimperi crude polysaccharide, Sargassum linifolium fucoidan and Stypopodium schimperi alginate extracts have promising effect on the surface texture. The data of Langmuir and the kinetic-thermodynamic isotherms were determined to clarify the nature of adsorption of extract on the metal-solution interface. The activation energy and activation parameters (changes in enthalpy, entropy and Gibbs free energy) were determined and gave indication for strong interaction between the inhibitor and the steel surface. The extract features were investigated via Fourier transform infrared spectroscopy. The polysaccharides from the brown algae, especially fucoidan, manifest potential as a natural electro-polishing blue inhibitor. Surface morphology study confirmed that addition of algae extract to a steel dissolution bath enhanced the surface appearance and its texture quality to great extent.

Crosslinked alginate/sericin particles for bioadsorption of ytterbium: Equilibrium, thermodynamic and regeneration studies

Sericin is a soluble globular protein, present in Bombyx mori silkworm cocoons. Sericin's properties can be improved to expand its application by producing blends with other substances, such as alginate polysaccharide and crosslinking agent poly(vinyl alcohol). This study evaluates the use of alginate and sericin particles chemically crosslinked with poly(vinyl alcohol) (SAPVA) for batch bioadsorption of rare-earth element ytterbium from aqueous medium. The equilibrium study showed that the maximum bioadsorption capacity for ytterbium was 0.642 mmol/g at 55 °C. Equilibrium data fit both Langmuir and Dubinin-Radushkevich models. The estimation of thermodynamic parameters showed that there was an increase in the entropy change, and that the bioadsorption process is endothermic and spontaneous. Characterization analyzes revealed that SAPVA particles, even after ytterbium bioadsorption, showed spherical shape, homogeneous composition, amorphous structure, low surface area, macropores, and low porosity. After the first regeneration cycle, the amount of captured ytterbium ions showed a slight increase (about 0.01 mmol/g) and calcium ions were completely released by SAPVA particles. Bioadsorbent particles separated selectively ytterbium from synthetic effluent containing different toxic metal ions. These results show that the SAPVA particles can be used as an effective bioabsorbent to remove and recover ytterbium from wastewater.

Integration of Fenton's reaction based processes and cation exchange processes in textile wastewater treatment as a strategy for water reuse

The remediation of a real textile wastewater aiming its reuse in the textile industry was carried out by integrating two processes: (i) a chemical or electrochemical advanced oxidation process (AOP or EAOP) based on Fenton's reaction for organics degradation, and (ii) a cation exchange process using marine macroalgae for removal of the iron acting in the Fenton's reaction based processes. Four AOPs/EAOPs at acidic pH 2.8 were tested: Fenton, photo-Fenton with ultraviolet A (UVA) radiation (PF/UVA), electro-Fenton (EF) and photoelectro-Fenton with UVA radiation (PEF/UVA). These processes provided very high color removals. After a running time of 45 min, the color removals were 68-95% for the Fenton process, 76-94% for the EF process, 80-98% for the PF/UVA process and 85-100% for the PEF/UVA process. In contrast, the mineralization was negligible for all the processes, indicating the generation/presence of persistent colorless compounds. The PF process was selected as first treatment stage due to its ability for color removal and related lower costs. A set of six marine macroalgae (Gracilaria caudata, Gracilaria cervicornis, Ascophyllum nodosum, Fucus spiralis, Laminaria hyperborea and Pelvetia canaliculata) were tested for iron uptake. Laminaria hyperborea showed the highest ion exchange capacity and affinity for iron species. Its application allowed the removal of all the iron acting in the PF process (3.4 mg/L). The textile wastewater resulting from the application of PF process followed by cation exchange with Laminaria hyperborea was successfully reused in scouring, bleaching and dyeing processes.

The performance of emerging materials derived from waste organism blood and saponified modified orange peel for immobilization of available Cd in soil

Waste organism blood (WOB) and orange peel are emerging stabilization materials obtained as by-products from agricultural processes, which are quite suitable for heavy metal immobilization in soil. In this work, waste organism blood and chemically modified orange peel (SOP) were investigated as potential sorbents for immobilization of available Cd in soil. Application of 5% WOB and SOP effectively immobilized cadmium (Cd) with an associated regulation of soil pH, among which the pH of acidic soil increased most significantly. While the application of 3% SOP alone stabilized almost the same amount of available Cd compared to WOB, it caused the highest stabilization rate of 58.85% when applied at 5%. By contrast, SOP combined with WOB (the mass ratio of the material is 1 : 1) at a 5% addition rate stabilized the available Cd in soils remarkably, with a stabilization rate of 57.74%. This study revealed that the soil particles after stabilization have a more compact and flaky structure, and the SOP and WOB had a particular pore structure, which was helpful for the adsorption of available Cd in soil. This study put forward new insights into the potential effects of Cd immobilization in contaminated soil by newly emerging stabilization biomass materials (WOB and SOP).

Arsenic and cadmium removal from water by a calcium-modified and starch-stabilized ferromanganese binary oxide

A new calcium-modified and starch-stabilized ferromanganese binary oxide (Ca-SFMBO) sorbent was fabricated with different Ca concentrations for the adsorption of arsenic (As) and cadmium (Cd) in water. The maximum As(III) and Cd(II) adsorption capacities of 1% Ca-SFMBO were 156.25 mg/g and 107.53 mg/g respectively in single-adsorption systems. The adsorption of As and Cd by the Ca-SFMBO sorbent was pH-dependent at values from 1 to 7, with an optimal adsorption pH of 6. In the dual-adsorbate system, the presence of Cd(II) at low concentrations enhanced As(III) adsorption by 33.3%, while the adsorption of As(III) was inhibited with the increase of Cd(II) concentration. Moreover, the addition of As(III) increased the adsorption capacity for Cd(II) up to two-fold. Through analysis by X-ray photoelectron spectroscopy (XPS) and Fourier-transform infrared spectroscopy (FTIR), it was inferred that the mechanism for the co-adsorption of Cd(II) and As(III) included both competitive and synergistic effects, which resulted from the formation of ternary complexes. The results indicate that the Ca-SFMBO material developed here could be used for the simultaneous removal of As(III) and Cd(II) from contaminated water.

Batch and continuous studies on the removal of heavy metals from aqueous solution using biosynthesised melanin-coated PVDF membranes

Heavy metals like mercury, chromium, lead and copper present in groundwater at lower concentrations cause severe health issues and can even be fatal when consumed. The biopigment/biopolymer melanin can be reaped from different sources like bacterium, fungus, and human hair. It has excellent heavy metal ion scavenging property and can be exploited for non-biological applications, substantially including water purification. In this work, melanin nanoparticles were derived from the marine bacterium Pseudomonas stutzeri and were coated onto hydrophobic polyvinylidene fluoride (PVDF) membrane as a support, for batch and continuous removal of heavy metal studies. Batch studies on the effect of pH, temperature and adsorbate dose and continuous adsorption studies on the effect of flow rate, adsorbate and adsorbent mass loadings were carried out by using biosynthesised melanin-coated PVDF membranes for the removal of Hg(II), Cr(VI), Pb(II) and Cu(II). Scanning electron microscope (SEM) images revealed the surface morphology, Fourier-transform infrared spectroscopy (FTIR) and energy-dispersive X-ray spectroscopy (EDS) deciphered the chemical characteristics of melanin-coated PVDF membranes before and after adsorption. Contact angle measurement confirmed the improvement in hydrophilicity of PVDF membrane upon coating with melanin. The maximum removal percentages of heavy metals achieved by melanin-coated PVDF membranes under batch mode operation were 87.6%, 88.45%, 91.8% and 95.8% for mercury, chromium, lead and copper, respectively optimised at 318 K and pH of 3 for chromium and 5 for other metals. However, the continuous mode of operation with a flow rate of 0.5 mL/min having 1 mg/L of heavy metal solution concentration exposed to 50 mg of melanin loading with a working volume of 200 mL showed better removal efficiencies compared with batch mode. The dynamic studies using Thomas and Yoon-Nelson models described the transient stage of the breakthrough curve and the model constants were calculated for column design and scale-up.